Senior mechanical engineer jobs in Orlando, FL - 1,179 jobs

We are currently recruiting a full-time Senior Mechanical Engineer located in Orlando, FL. MUST HAVE 10 YEARS OF EXPERIENCE. Position offers a competitive salary and robust recruitment package. RESPONSIBILITIES: Responsible for system design from blank sheet of paper to create concept of mechanical components based on project requirements Experience doing design via 3D modeling software (SolidWorks preferred) Provide input, and system modification as needed, for system integration with other project disciplines Manage vendor scope to verify safety, functionality, and all contract requirements are satisfied. Ensures design complies with any local or government agency design/implementation codes in addition to client codes/standards. Project technical risk assessment document generation and mitigation implementation Design and analysis for safety critical parts within a mechanical system. Designing redundant mitigations in system to increase safety and reliability. Designing systems with complex motion and integration from automated systems. Develops documents of system configuration and design. Documents include Description of operation, Detailed mechanical system design description, analysis reports, system implementation/acceptance test plans, system routine maintenance/job plans Ability to design and troubleshoot pneumatic and hydraulic systems Ability to perform system analysis/calculations including Stress, fatigue, reliability, life expectancy, tolerance studies Knowledge of ride system design for attractions involving guests is preferred Capable of working off shifts as needed during installation/commissioning to support project. QUALIFICATIONS: Must be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters. Education: Bachelor's degree in mechanical engineering. (Bachelor's degrees in other disciplines may be acceptable if work experience is directly related to mechanical engineering. Disciplines outside of the mechanical area will not be considered) Experience: 10+ years of experience in mechanical engineering roles At least 3+ years of experience in mechanical design from scratch or major modifications (50+% redesign)

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Please note that this opportunity is contingent on program funding. Start dates are determined after funding confirmation. Northrop Grumman Aeronautics Systems sector is seeking a Principal Aeronautical Engineer (Airframe Design) to join our team of qualified, diverse individuals in defining the future. This position will be located in Melbourne, FL. In this role, you will work within an Integrated Product Team (IPT) environment to develop primary and secondary metal and composite aircraft structure parts and assemblies, lead design and trade study efforts, mentor less experienced engineers, and develop advanced design solutions to complex technical problems. The successful candidate possesses substantial experience with design and fabrication techniques for aircraft primary structural details, assemblies, and installations utilizing both metallic and composite materials, conventional fastening methods, bonded primary structures, major structural joint definition, and load path development. Responsibilities may include: Design primary and secondary aircraft structural parts, assemblies, and installations using metallic and/or composite materials for new aircraft design and/or modifications to existing aircraft Working within or leading an IPT, interfaces with IPT/Program leadership, suppliers, customers, and other technical disciplines to independently prepare and lead the preparation of engineering design solutions to challenging problems through the development of Product Definition Packages Collaborate with structural analysis, manufacturing, materials and processes, and other stakeholders to produce flight weight structures Employ GD&T and Model Based Engineering (MBE) methods in support of Digital Transformation to create airframe layouts and produce engineering definitions Assist team to develop/document best practices and mentor less experienced engineers Basic Qualifications: Bachelor of Science (BS) degree in a relevant STEM (Science, Technology, Engineering or Mathematics) discipline and 5 years of related engineering experience; OR Master of Science (MS) degree in a relevant STEM discipline and 3 years of related engineering experience; OR a PhD in a relevant STEM discipline and 0 years of related engineering experience. Experience designing primary and secondary composite aircraft parts/components, assemblies, and installations Your ability to obtain and/or transfer and maintain the final adjudicated government Secret clearance, and any program access(es) required for the position within a reasonable period of time, as determined by the company. Preferred Qualifications: Degree in Aerospace or Mechanical Engineering Proficiency with NX Solid Modelling or similar 3D modeling software Proficiency with Teamcenter Understanding of GD&T and MBE methods #AS-FA3 We offer flexible work arrangements, 9/80 work schedule with every other Friday off, phenomenal learning opportunities, exposure to a wide variety of projects and customers, and a very friendly team environment. We are looking for self-motivated, proactive, and goal-oriented people to help us grow our services and become even better at what we do. Primary Level Salary Range: $95,300.00 - $142,900.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

We have a Mechanical Engineer position open in Orlando, FL. This position is responsible for mechanical engineering on large-scale projects. Project requirements involving mechanical system design from scratch, analysis/calculations (stress/fatigue/etc.), acceleration forces, load calculations, material stress design, failure and effects analysis, risk assessment, component selection, and mechanical system installation/commissioning. RESPONSIBILITIES: Must be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters Designs, develops, and implements fully integrated mechanical assembly systems to meet process requirements. As well as complying with any local or government agency design/implementation codes Knowledge of analyzing system design for Hazard analysis development and mitigation Understanding of Class 1 parts in order to minimize their need and optimize redundancy minimizing single points of failure Develops documents of system configuration and design. Documents include Theory/Description of operation, Detailed mechanical system design description, system implementation/acceptance test plans, system routine maintenance/job plans Develops drawings of mechanical design, assemblies, and installation procedures on AutoCAD and/or SolidWorks software Ability to design and troubleshoot pneumatic and hydraulic control systems Ability to perform system analysis/calculations including Stress, fatigue, reliability, life expectancy, tolerance studies Knowledge of ride system design requirements for attractions involving guest accelerations, reach envelope, ingress/egress, weight, and emergency evacuation analysis and implementation upon control system failure in worst-case scenarios Will assist with the initial start-up and debugging of integrated systems and the development of system documentation Individual will be working on system integration projects for clients in industries such as entertainment and manufacturing Will act as technical lead on projects and guide lower-level engineers, technicians, and contractors Will act as Project Manager on smaller projects ranging from $50k to $250k. This includes but is not limited to: Develops and executes implementation plans for the project Assigns work to meet overall project deadlines Ensures that all project team members clearly understand the scope of W-M responsibilities Develops schedules for W-M and customer requirements Evaluates progress on project(s) and details changes Responsible for all purchasing and subcontractor requirements Responsible for the development of costs and proposal of change orders to contract scope Qualifications QUALIFICATIONS: Education - Bachelor's Degree in Mechanical Engineering. Experience - 5+ years in the following areas is preferred: An in-depth understanding of mechanical systems, components, stress analysis, acceleration forces, and knowledge of amusement ride safety standards (ASTM Standards). Experience with AutoCAD and SolidWorks is also desired Key Competencies - Knowledge of contract documents and specifications. Ability to collect field data and accurately record findings. Ability to perform system design functions. Planning, Customer Focused, Timely Decision Making, Informing, Organizing, Priority Setting, Problem Solving Skills - All employees are required to be proficient in the use of Microsoft Windows and Office environments TRAVEL: Ability to travel up to 35% PHYSICAL DEMANDS OF POSITION: Seeing, color perception, hearing, listening, clear speech, dexterity in hands, driving, lifting, climbing, ability to mount and dismount equipment, pushing, and pulling. WORKING ENVIRONMENT/CONDITIONS: Standard office environment, On-site office environment, and diverse industrial environments. Frequent PC usage, fax machines, copy machines, and phones. Additional Information All your information will be kept confidential according to EEO guidelines.

Become a part of ENERCON as a Mechanical Design or Mechanical Project Engineer. We are seeking talented Mechanical Engineers at all experience levels, from early-career professionals to principal engineers. Our Mechanical Engineer career path has many options. You can bring your experience to our mid-level and senior roles, or step into a principal engineer position where you'll lead and mentor others. We continually invest in our employees and provide training and tools for advancement, development, and career progression-whether you prefer a path to become a subject matter or technical expert, a people leader, a project manager, or a leader in business development. We can discuss full-time, part-time, or temporary roles. Whether you are just starting your career or bring years of experience, we encourage you to explore our exciting opportunity and become part of our innovative and impactful team. What divisions could you work for? Nuclear Services Group (NSG) ENERCON Federal Services (EFS) Data Center Mission Critical (DCMC) Energy Group (EG) Responsibilities A typical day may include being part of a multi-discipline engineering team for major projects such as cooling water systems (pumps, motors, control systems, piping, heat exchangers) for existing or new power plants. Other days you may be leading simple design projects such as valve replacements or writing engineering reports (such as corrosion studies or pros and cons of different equipment). You will also: Deliver High-Quality Engineering Documents: Prepare accurate and error-free drawings, sketches, calculations, and analyses that meet industry codes, standards, and regulations, ensuring client needs are met with precision Adhere to Standards: Develop engineering documents in alignment with client, ENERCON, and regulatory requirements while following established procedures, processes, and project directives Stay Ahead of the Curve: Keep your knowledge sharp and current with industry codes, standards, safety culture principles, and advanced design techniques tailored to the nuclear sector Commit to Excellence: Produce engineering deliverables that meet stringent quality assurance standards, aligning with project scopes and exceeding client expectations Build Lasting Client Relationships: Establish trust and rapport with clients through clear communication, professional interactions, and the delivery of exceptional engineering solutions Collaborate Across Disciplines: Work closely with other teams to ensure designs are comprehensive, integrated, and consider the needs of all disciplines involved #LI-AS1 Get Hands-On in the Field: Travel to plant sites to connect with client personnel, conduct on-site walkdowns, and evaluate plant structures, systems, and components firsthand to inform project work Qualifications This position covers a range of internal levels. Minimum qualifications for our mid-level position are shown below: Bachelor's Degree in Mechanical Engineering from an accredited university Minimum 3 years of experience with design of mechanical systems Experience in one of the following industries highly preferred: engineering/design services, power generation, nuclear power, heavy industrial including chemical or pulp & paper, and government (DOE) projects Good writing, presentation and communication skills Ability to be an individual contributor and work effectively in teams Proficient in Word and Excel Please note: Some roles may involve work on federal contracts that require employees to be citizens of the United States. For those specific positions, only applicants who can confirm their status as U.S. citizens will be considered. Senior Engineers typically have 7 years of post-graduate experience in a related role Principal Engineers typically have 10 years of post-graduate experience in a related role If you do not have 3 years of experience quite yet, we will transfer your information to our early talent team or you can view those openings here: Early Talent Opportunities Pay Range USD $90,000.00 - USD $177,450.00 /Yr. Additional Information About ENERCON: At Enercon Services, Inc. (ENERCON), we're driven by our people-and we're proud to offer rewarding careers in a culture of excellence. We provide a comprehensive benefits package and professional development opportunities that support your long-term growth. What We Offer: Enjoy full benefits for you and your dependents starting day one, no waiting period Flexible work arrangements, including hybrid and alternative schedules 401(k) with employer matching Tuition reimbursement Professional Engineer (PE) license support and incentives Want to see the full picture? Click HERE to see our Comprehensive Benefits Salary Range Information: If a salary range is listed, it reflects the typical range for this full-time position based on the role, level, and location. Individual compensation within the range will be determined by factors such as work location, relevant experience, job-related skills, and education or training. Eligibility to Work: Candidates must be legally eligible to work in the US without requiring current or future sponsorship. Ability to pass a pre-employment and random drug and alcohol screenings, ENERCON and client specific background checks, and annual motor vehicle record (MVR) according to company and client policies. Equal Opportunity Employer: ENERCON does not discriminate in employment opportunities or practices based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. Connect with Us: *************** | LinkedIn

Job Title: Manufacturing CAD Technician Schedule: Monday-Friday, 8:00 AM - 5:00 PM We are seeking an experienced Manufacturing CAD Technician to support the development and maintenance of facility layout drawings. This role involves gathering layout data from multiple sources, updating existing drawings in DraftSight, and collaborating with cross-functional teams to ensure accuracy and alignment with project requirements. The ideal candidate will be detail-oriented, proactive, and able to manage tight timelines while maintaining effective communication with shop-floor teams. Key Responsibilities * Collect and organize facility layout data, including equipment, workstations, electrical panels, and other elements. * Update and maintain layout drawings using DraftSight. * Collaborate with engineering, operations, and other teams to validate data and understand new project requirements. * Track progress and ensure activities remain on schedule. * Demonstrate flexibility and problem-solving skills to meet project deadlines. * Communicate effectively with shop-floor personnel and cross-functional teams. Required Skills & Qualifications * 3-7+ years of experience in mechanical drafting or facility layout design. * Proficiency in DraftSight, AutoCAD, Windchill or similar tools. * Strong understanding of drafting processes and standards. * Excellent communication and collaboration skills. * Ability to work independently and manage multiple priorities under tight timelines. Work Environment * On-site position in Orlando, FL. * Standard business hours: Monday-Friday, 8:00 AM - 5:00 PM. Job Type & Location This is a Contract to Hire position based out of Orlando, FL. Pay and Benefits The pay range for this position is $25.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Orlando,FL. Application Deadline This position is anticipated to close on Jan 13, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Details: Introduction Visium Resources has been asked to identify qualified candidates for this Mechanical Drafter position located in Orlando, FL. This position is a direct hire opportunity which is expected to be on-site. This position is responsible for the design and drafting of mechanical component drawings. Major Duties: Conceptualize and use CAD tools to generate all fab packages for sourcing of mechanical components. Optimize mechanical components for performance, cost and ease of manufacturing. Interface and collaborate with engineers to take concepts, sketches and layouts and create detailed design models and drawings. Maintain drawing revision control per client's internal document control process. Details: Qualified candidates would have the following: Minimum Qualifications: Proficient in CAD design using SolidWorks and AutoCAD with a demonstrated ability to quickly learn other CAD programs. Understanding of CNC machining processes and how to optimize mechanical design for ease of machining. Good analytical and mathematical background. Excellent organizational skills. Desirable: Knowledge of ANSI and ASME standards. Desirable: Experience with the use of Mentor Graphics for the design of printed circuit boards. Education, Experience, & Training: 5-10 years of 2D and 3D drafting and modeling using AutoCAD and SolidWorks. AS degree in drafting, mechanical design, mechanical engineering technology or equivalent experience.

McKim & Creed is a unique, employee-owned firm. First and foremost, we value people. This means we not only hire great talent, we've also created an environment where each individual can grow, flourish and apply innovative thinking. As a result, we've created a world-class team of professionals within a nimble organization. That's what our clients want. That's why we succeed. Our clients hire us because of our people. McKim & Creed has a reputation for state-of-the-art engineering services that help energy users and providers convert facilities to cleaner, more efficient energy sources; harness the power of renewables; and optimize existing infrastructure and resources. Our highly respected team of engineers, planners and project managers are committed to the innovation, sustainability and resource efficiencies that lead to a cleaner, safer and more sustainable future. We have an exciting opportunity to join our Building, Energy and Infrastructure (BEI) Group to support our projects in and around Orlando. If you want to work at a company that will help you become the best you can be, we're glad you found McKim & Creed. YOUR DAY-TO-DAY WILL INCLUDE: * This person works as part of a multi-discipline project team on projects in the Buildings, Energy, and Infrastructure group, in support of Mechanical (HVAC, plumbing and fire protection) systems for facility types including healthcare; higher education; institutional; federal, state and local government; K-12 education and support; and other commercial/industrial facilities. * Serves as a primary mechanical design engineer for projects, producing design/construction drawings under the supervision of more-senior staff. * Assists with evaluations of existing mechanical equipment/systems and prepares design computations and assessments. * Generates mechanical design/construction drawings utilizing REVIT and AutoCAD software. * Observes mechanical construction progress as directed by more senior staff and generates field observation reports. * Is responsible for completion of mechanical design tasks within budget and on schedule. * Assists with designs, writing of reports and correspondence with other discipline professionals, as well as representatives of the Client organization to help complete work efficiently. WHAT YOU NEED: * Bachelor's Degree in Mechanical Engineering -OR-- Bachelor's Degree in Architectural Engineering with Mechanical focus, from an ABET-accredited university. * 2-4 years of documented applicable experience, working on facilities for healthcare; higher education; institutional; federal, state, and local government; K-12 education & support; and other commercial/industrial facilities. * Resides in the greater Central Florida area, such as within one of the following counties: Orange, Seminole, Volusia, Brevard, Osceola and Lake; Or is willing to relocate to the aforementioned counties. * Engineer Intern Certification * Ability to work in person a minimum of three (3) days weekly in the local office located in east Orlando, Florida right next to the UCF campus. * Ability to travel to project locations and client meetings throughout east and north Florida. Travel beyond this primary area may occasionally also be required. * Significant applicable experience using Autodesk REVIT and AutoCAD MEP. * Strong knowledge of the Microsoft Office suite of software, as well as Bluebeam. * Strong knowledge of the FBC Mechanical code and ASHRAE standards commensurate with their years of experience. * Ability to climb ladders and perform typical field survey duties of existing facilities. * Possess a valid driver's license and an acceptable motor vehicle and criminal record. * Pass a drug test. WHAT MAKES YOU STAND OUT: Desired Professional Traits: * A process-oriented individual with strong organization, technical and communication skills. * A solid communicator, able to take and understand directives from Project Manager and Senior Mechanical Engineer and coordinate efforts with design team. * Able to complete work consistently with flexibility to accommodate varying project demands. * Maintains a high level of precision and accuracy and is methodical in their approach to work. * Has a high technical aptitude, interested in technology and staying current in their field. WHAT WE OFFER: Join a company that puts its employees first. Ranked as one of the Best Firms to Work For, here are just some of the reasons to become part of the McKim & Creed team: * Employee Stock Ownership Plan (ESOP): All employees are owners & benefit from profits earned * Competitive pay + paid holidays, bereavement and parental, medical, and military leave * Multiple office locations to work from: Stick close to home or travel for a change of scenery * Growth opportunities & training: Grow confidently in your career with our mentoring & training options * Professional development: Tuition reimbursement, early career professional program, online courses & more * Work that makes a difference: See the direct impact your work has on our communities * Collaborative, supportive team: People to help you solve problems, cheer successes & encourage you along the way WATCH THIS VIDEO TO LEARN MORE ABOUT WHAT IT'S LIKE TO BE A PART OF OUR TEAM! McKim & Creed is an Equal Opportunity and Affirmative Action Employer, and VEVRAA Federal Contractor and will consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability status and maintains a Drug Free Workplace.

McKim & Creed is a unique, employee-owned firm. First and foremost, we value people. This means we not only hire great talent, we've also created an environment where each individual can grow, flourish and apply innovative thinking. As a result, we've created a world-class team of professionals within a nimble organization. That's what our clients want. That's why we succeed. Our clients hire us because of our people. McKim & Creed has a reputation for state-of-the-art engineering services that help energy users and providers convert facilities to cleaner, more efficient energy sources; harness the power of renewables; and optimize existing infrastructure and resources. Our highly respected team of engineers, planners and project managers are committed to the innovation, sustainability and resource efficiencies that lead to a cleaner, safer and more sustainable future. We have an exciting opportunity to join our Building, Energy and Infrastructure (BEI) Group to support our projects in and around Orlando. If you want to work at a company that will help you become the best you can be, we're glad you found McKim & Creed. YOUR DAY-TO-DAY WILL INCLUDE: This person works as part of a multi-discipline project team on projects in the Buildings, Energy, and Infrastructure group, in support of Mechanical (HVAC, plumbing and fire protection) systems for facility types including healthcare; higher education; institutional; federal, state and local government; K-12 education and support; and other commercial/industrial facilities. Serves as a primary mechanical design engineer for projects, producing design/construction drawings under the supervision of more-senior staff. Assists with evaluations of existing mechanical equipment/systems and prepares design computations and assessments. Generates mechanical design/construction drawings utilizing REVIT and AutoCAD software. Observes mechanical construction progress as directed by more senior staff and generates field observation reports. Is responsible for completion of mechanical design tasks within budget and on schedule. Assists with designs, writing of reports and correspondence with other discipline professionals, as well as representatives of the Client organization to help complete work efficiently. WHAT YOU NEED: Bachelor's Degree in Mechanical Engineering -OR-- Bachelor's Degree in Architectural Engineering with Mechanical focus, from an ABET-accredited university. 2-4 years of documented applicable experience, working on facilities for healthcare; higher education; institutional; federal, state, and local government; K-12 education & support; and other commercial/industrial facilities. Resides in the greater Central Florida area, such as within one of the following counties: Orange, Seminole, Volusia, Brevard, Osceola and Lake; Or is willing to relocate to the aforementioned counties. Engineer Intern Certification Ability to work in person a minimum of three (3) days weekly in the local office located in east Orlando, Florida right next to the UCF campus. Ability to travel to project locations and client meetings throughout east and north Florida. Travel beyond this primary area may occasionally also be required. Significant applicable experience using Autodesk REVIT and AutoCAD MEP. Strong knowledge of the Microsoft Office suite of software, as well as Bluebeam. Strong knowledge of the FBC Mechanical code and ASHRAE standards commensurate with their years of experience. Ability to climb ladders and perform typical field survey duties of existing facilities. Possess a valid driver's license and an acceptable motor vehicle and criminal record. Pass a drug test. WHAT MAKES YOU STAND OUT: Desired Professional Traits: A process-oriented individual with strong organization, technical and communication skills. A solid communicator, able to take and understand directives from Project Manager and Senior Mechanical Engineer and coordinate efforts with design team. Able to complete work consistently with flexibility to accommodate varying project demands. Maintains a high level of precision and accuracy and is methodical in their approach to work. Has a high technical aptitude, interested in technology and staying current in their field. WHAT WE OFFER: Join a company that puts its employees first. Ranked as one of the Best Firms to Work For, here are just some of the reasons to become part of the McKim & Creed team: Employee Stock Ownership Plan (ESOP): All employees are owners & benefit from profits earned Competitive pay + paid holidays, bereavement and parental, medical, and military leave Multiple office locations to work from: Stick close to home or travel for a change of scenery Growth opportunities & training: Grow confidently in your career with our mentoring & training options Professional development: Tuition reimbursement, early career professional program, online courses & more Work that makes a difference: See the direct impact your work has on our communities Collaborative, supportive team: People to help you solve problems, cheer successes & encourage you along the way WATCH THIS VIDEO TO LEARN MORE ABOUT WHAT IT'S LIKE TO BE A PART OF OUR TEAM! McKim & Creed is an Equal Opportunity and Affirmative Action Employer, and VEVRAA Federal Contractor and will consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability status and maintains a Drug Free Workplace.

Building the people that build the world. With platforms in HVAC and Detection and Measurement, SPX Technologies builds innovative solutions that enable a safer, more efficient, sustainable world. Through our RiSE talent development framework, we Reach, Identify, Strengthen, and Engage our employees to support them in their continued development. We're a global company of problem solvers, collaborators, and innovators, and our businesses build solutions that impact the world. As part of Detection and Measurement, CUES is the world's leading developer of water, wastewater, and storm water inspection equipment. With CCTV cameras, pre-built vehicles, and software for pipeline inspection and rehabilitation, we improve the safety and reliability of our water infrastructure systems. How you will make an Impact (Job Summary) We are seeking a highly skilled and experienced Mechanical Engineer to join our team in the development of mobile robotic systems for pipe inspection and repair. As a Mechanical Engineer, you will play a key role in designing, analyzing, and optimizing the mechanical systems and components working with other engineering disciplines such as electrical, firmware, software and labs. Ideal candidates will apply interdisciplinary knowledge to create innovative solutions for electromechanical systems. You will collaborate with cross-functional teams, including manufacturing, purchasing, customer service and quality assurance, to ensure the successful development and launch of high-quality products. In addition, you will design, test, and develop product and product components following company and industry standards while assisting in the supervision of laboratory activities for assigned projects. What you can expect in this role (Job Responsibilities) Design and develop mechanical systems and components for cameras, transporters, lifts, and other devices, including mechanisms, bodies, bearings, motors, gears, seals, controls, etc., following company and industry standards. Conduct detailed analysis, simulations, and calculations to evaluate and optimize the performance, efficiency, and durability of components and systems. Collaborate with product management, electrical and firmware engineering and other functions to define product requirements, specifications, and design goals for mobile robotic systems. Create 3D models and engineering drawings using SolidWorks, ensuring adherence to industry standards and best practices. Work with design personnel on the detailed layout, prints, parts specifications, and bill of materials for the product. Develop non-routine test methods, instrumentation, and procedures not covered by recognized Approval Agency requirements or rating codes. Analyze and interpret test data, making design modifications if necessary, to meet product performance and safety requirements. Conduct product and component testing in accordance with CUES standards and recognized approval agency requirements and codes, such as UL, ANSI, ISO, and/or CSA. Develop and maintain project schedules, ensuring timely completion of activities related to product design and development. Collaborate with Product Management and other functions to formulate and update product design specifications. Provide technical support and assistance to other departments, including Operations/Manufacturing, Quality, Customer Service, Lab, Product Managers, and Purchasing. Identify potential technical improvements to existing products/processes/services or cost reductions. Lead cross-functional teams in the development, maintenance, and update of DFMEAs, and assist in the development of PFMEAs and Process Control Plans. Stay updated with industry trends, advancements, and emerging technologies in pipe inspection robotics. Mentor engineering team members on core engineering principles/practices and assist in their professional growth. May provide work direction to junior engineers, lead project teams, lead engineering wide process improvements, lead creation of standards as a subject matter expert or be a product owner. What we are looking for (Experience, Knowledge, Skills, Abilities, Education) Bachelor's degree in Mechanical Engineering, Mechatronics or a related field. Master's degree preferred. 6+ years of experience in mechanical engineering, specifically in the design and development of robotics, automation, AGVs, drones, and/or cameras. Proficiency in CAD software (e.g., SolidWorks) for 3D modeling. Familiarity with manufacturing processes including machining processes, molding, and casting. Working knowledge of GD&T and experience generating engineering documentation. Extensive machine design experience including power transmission, sealing, and mechatronics packaging. Experience working on interdisciplinary teams who develop electromechanical systems and basic understanding of electrical engineering principals and software development processes. Familiarity with regulatory approval agency requirements, including UL, ANSI, ISO, and/or CSA. Working knowledge of project management principles and experience in product lifecycle management. Strong understanding of electromechanical mechanisms and controls in automation. Experience with Finite Element Analysis, design for manufacturing/assembly, design for reliability and relevant hand calculations. Experience working on stage gate new product development and sustaining engineering. Some level of controls programming and electronics skill preferred. Demonstrated leadership skills and the ability to work effectively in cross-functional teams. Excellent problem-solving, communication, and organizational skills. Proficiency in Microsoft Word, Excel, Project, and PowerPoint. Knowledge of ERP systems, such as IFS, and product lifecycle management systems, such as PDM Pro, is a plus. How we live our culture Our culture is at the center of what we do and, more importantly, who we are. Our core values set a standard for how we manage ourselves, and our Leadership Model sets the standard for how we engage with each other. Whether you are an individual contributor or you lead a large team, each of us leads at SPX. What benefits do we offer? We know that the well-being of our employees is integral. Our benefits include: Generous and flexible paid time off including paid personal time off, caregiver, parental, and volunteer leave Competitive health insurance plans and 401(k) match, with benefits starting day one Competitive and performance-based compensation packages and bonus plans Educational assistance, leadership development programs, and recognition programs Our commitment to embrace diversity to build a culture of inclusion at SPX We value different backgrounds, experiences, and voices at SPX, and we are committed to challenging ourselves, openly communicating, and striving to improve every day. We believe in creating an inclusive work environment where everyone has a voice and is encouraged to realize their fullest potential. SPX is an affirmative action and equal opportunity employer committed to making selection decisions without regard to race, color, religion, sex, sexual orientation or identity, national origin, age, disability, veteran status, or any other legally protected basis.

**About the Role and Team** We create happiness." That's our motto at Walt Disney Parks and Resorts, and it permeates everything we do. At Disney, you'll help encourage that magic by enabling our company to push the limits and build the never-before-seen! Are you ready to join this team and make an impact? We are currently looking for a highly motivated Systems Engineer - Mechanical Analyst with a BS/MS and 1+ year work experience to join our team of Systems Engineers on the Modeling, Simulation, and Training Tools team at the Walt Disney Company. In this role, you will lead and contribute to technical projects focused on the simulation and analysis of mechanical systems for Walt Disney Imagineering, Ride and Show Engineering, Engineering Services, and Entertainment for Ride, Show, and Animatronic Systems. These services will include developing rigid multi-body dynamic models (MATLAB/Simulink/Simscape); data preparation and analysis (MATLAB); and working with a team of engineers leading small technical projects. This is a 24-month Project Hire role based in Lake Buena Vista, FL, reporting to the Systems Engineer Manager. **What You Will Do** + Lead and contribute to technical projects focused on the simulation and analysis of animatronics and show systems. + Prepare models for rigid-body dynamic analyses (e.g., CAD preparation in SolidWorks, defining system kinematics and dynamic properties). + Build and run rigid-body dynamic models for simulation (e.g., MATLAB/Simulink (Simscape Multibody). + Prepare reports, documentation, and presentation materials summarizing analysis results and communicating results to partners. + Collaborate with mechanical design teams, other analysts, and creative partners on the technical details of the simulations. + Work with our Walt Disney Imagineering (WDI) and Facilities and Operational Services (FOS) partners to communicate requirements and results from system simulations. + Prepare proposals for stakeholders, including scope of work, budgets, and schedules. + Track and advise project teams and leadership on project schedule and budget trends. + Support tool development for automation of analysis processes through coding, testing, and validation. **Required Qualifications & Skills** + Strong physics and mathematics academic background. + Proven ability to lead small analysis or simulation projects, working independently or overseeing a small team of supporting engineers. + Proficiency in CAD Software (SolidWorks highly preferred). + Experience in dynamic modeling and simulation software (MATLAB/Simulink, Simscape Multibody highly preferred). + Experience with scripting and programming in software languages such as Python or MATLAB. + Strong interest in systems engineering and software (automation, coding, and debugging). + Familiarity with both software and mechanical version control systems (Git, PDM, Upchain, or similar tools). **Preferred Qualifications** + Experience with working on animatronic systems or other related work in the entertainment industry. + Familiarity with Agile software development practices, including scrum, sprint planning, retrospectives, etc. + Proven Professional Engineer License or equivalent. + Demonstrated understanding of the Software Development process. + Experience with Finite Element Analysis (Ansys or SolidWorks). **Education** + Bachelor's Degree in Mechanical Engineering or Equivalent from ABET-certified curriculum (preferred). Electrical Engineering, Electronic Engineering, and Computer Engineering may also be considered. + MSEE, MSME, MSCE, MSCS, and/or post-graduate work is preferred. **Additional Information** Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at *************************************** . **This position will remain open from 12/22/25 to 1/5/26.** \#dxfos \#DXMedia \#li-dm2 **Job ID:** 10137903 **Location:** Lake Buena Vista,Florida **Job Posting Company:** Walt Disney World Resort The Walt Disney Company and its Affiliated Companies are Equal Employment Opportunity employers and welcome all job seekers including individuals with disabilities and veterans with disabilities. If you have a disability and believe you need a reasonable accommodation in order to search for a job opening or apply for a position, email Candidate.Accommodations@Disney.com with your request. This email address is not for general employment inquiries or correspondence. We will only respond to those requests that are related to the accessibility of the online application system due to a disability.

We are looking for a Principal Mechanical Engineer. This position is responsible for planning, coordinating, and directing all activities, projects, and personnel within the Mechanical Engineering team. You will act as a liaison both internally and externally for Mechanical Engineering by interacting with Market Sector Leaders, Project Managers, personnel at Sibel Health, clientele, consultants and vendors. WHAT YOU WILL BE WORKING ON: * Lead the Mechanical Engineering team to achieve their objectives. * Present technical findings or project status to cross functional teams and management through design reviews, presentations, and other means of communication. * Establish design standards and procedures to manage the work. * Determine personnel needs, by team, and for each individual project based upon the current and projected workload; collect information and feedback from managers including staffing recommendations and workload projections. * Convey personnel needs to the VP of Hardware and participate in the recruitment, interviewing and selection of prospective candidates. * Act as a mentor for the team members by providing continuous guidance and support through professional training and career development. * Create and interpret analyses to determine suitability of design concepts * Work with manufacturing and suppliers to ensure feasibility of production * Research, plan, design, verify, validate electromechanical products and systems * Review all Mechanical Engineering deliverables for technical content, drawing quality and adherence to regulatory/project requirements. * Discuss goals and project objectives, requirements and budgets with team members and leadership. ABOUT YOU: * Bachelors of engineering degree and 10+ years of experience in mechanical product development * 5+ years of experience in the medical device industry with direct involvement in new product development. * 2+ years of experience managing engineering teams in a multi-disciplinary organization * Solid understanding of medical device regulations, particularly with respect to the development of new products. * Ability to communicate effectively and tactfully * Demonstrated ability to promote and establish teamwork and individual leadership * Ability to successfully and continuously lead a team of engineering professionals to meet and exceed goals * Effective time management and organizational skills; ability to become involved in a number of projects and remain up-to-date on the various developmental stages * Expertise with CAD, preferably Solidworks * Experience with compression molding processes and equipment or quick prototyping using soft moldable silicones * Geometric Dimensioning and Tolerancing (GD&T). * Experience with high-volume manufacturing YOU MAY THRIVE IN THIS ROLE IF: * Experience working in a startup environment. * Experience designing/developing wearable monitoring medical devices * Formal training in Six Sigma methodologies

Please Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Principal Mechanical Design Engineer II to our team. If you are great at what you do, enjoy working in a startup environment, and are passionate about developing leading-edge hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be responsible for the mechanical design of Cesium products through all phases of the development process. The ideal candidate will have extensive experience in electronics packaging design, mechanical simulations and analyses, computer-aided design (CAD), spacecraft mechanical interfaces, and environmental qualification of electronic assemblies. As a principal mechanical team member, you will be responsible for mechanical designs from initial concept design through requirements definition, detailed design, simulation, analysis, manufacturing, testing, qualification, and in-orbit support of Cesium's products. Required skills and experience include thermal management design, precision machining principles, thermal simulation and analysis, shock and vibration simulation and analysis, electromagnetic interference/compatibility (EMI/EMC) mitigation techniques, geometric dimensioning and tolerancing (GD&T), finite element analysis (FEA), and cost analysis to develop, validate, and optimize mechanical designs. Principal engineers also serve as technical and professional mentors in their field. The successful candidate will also present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required. This role will initially be remote, with a planned transition to in-person work once our Florida office is established.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS Bachelor of Science (BS) or Master of Science (MS) degree in Mechanical or Aerospace Engineering from an accredited university or institution. 11 years of industry experience in design and analysis of electronics packaging, including thermal, vibration, and stress dynamics, or 9 years of experience with a Master's degree. Expertise in aerospace industry design, development, and qualification. Expert-level proficiency with electronics assemblies and experience working closely with electrical engineers. Expert-level proficiency with professional mechanical and FEA CAD tools, such as Solidworks Simulation. Experience with CNC manufacturing. Experience with EMI/EMC mitigation techniques. Excellent written and verbal communication skills. CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description#1 in Thermal Protection Systems From Engine Bay to Payload, we protect vital structures and systems. About Hera Technologies:Hera Technologies is a premier contract manufacturer specializing in high-precision metallic and non-metallic components for the Aerospace, Defense, Space, and Commercial Airline sectors. Our commitment to quality, innovation, and customer satisfaction has positioned us as an industry leader. Our team is driven by excellence, integrity, and a passion for advancing aerospace technology. Role Overview:This position leads the design, development, and manufacturing of advanced mechanical components and assemblies for Hera Technologies' industry-leading thermal protection systems (TPS). The engineer will work hands-on with TPS soft goods, composites, and engineered surface finishes, supporting the full lifecycle from concept and design through prototyping, manufacturing, and production. The role requires close collaboration with cross-functional teams to ensure manufacturability, performance optimization, and compliance with aerospace and defense standards. Ideal candidates bring a strong foundation in mechanical design and manufacturing, with practical experience in advanced materials and ruggedized hardware applications. Key Responsibilities•Lead the design, development and manufacturing of mechanical components and assemblies for Hera's industry-leading thermal protection systems (TPS), including softgoods, composites, and engineered surface finishes.•Collaborate with cross-functional teams to develop and implement scalable manufacturing and assembly processes that ensure quality, efficiency, and compliance with aerospace and defense standards.•Create and maintain process documentation and controls to support consistent production outcomes and optimize throughput across design, prototyping, and manufacturing phases.•Utilize traditional and advanced manufacturing techniques for metallics, composites, and other materials used in thermal protection systems and critical aerospace structures, ensuring performance, durability, and production scalability.•Prototype and test advanced materials-including carbon fiber composites, high-temperature elastomers, and reinforced fabrics-iterating based on performance data and failure analysis.•Investigate material failures, process anomalies, and manufacturing defects by leading root cause analyses to implement corrective actions in both development and production phases. Required Qualifications•4+ years of mechanical design and manufacturing experience, with emphasis on metallic, composites and thermal protection systems (TPS).•Proven leadership in engineering projects involving design, prototyping, and production of mechanical systems, including soft goods and polymer-based components.•Hands-on experience with advanced materials and mechanical components in aerospace or defense applications, including TPS and engineered surface finishes.•Strong understanding of elastomer and composite manufacturing processes, material properties, and relevant aerospace testing standards.•Proficient in CAD software (e.g., SolidWorks) with the ability to produce high-quality, production-ready engineering drawings.•Solid foundation in engineering principles including structures, materials science, thermal management, and mechanical system design.•Skilled in prototyping and fabrication techniques such as machining, composite layups, bonding and mechanical assembly.•Expertise in creating manufacturing and build plans/procedures for variety of customer products and assemblies with respect to industry standards or customer supplied specifications. •Bachelor's degree in mechanical engineering or a related field, or equivalent industry experience in advanced material applications. Preferred Qualifications•Proficient in SolidWorks or similar CAD/CAM tools, with experience using PLM systems to manage design and production workflows.•Strong knowledge of GD&T per ASME Y14.5, with demonstrated ability to apply tolerancing principles in aerospace-grade engineering drawings.•Advanced design experience across CNC machining, composites, ceramics, sheet metal, and injection molding, including tooling and mold development for high-performance applications.•Demonstrated leadership and strong interpersonal skills in cross-functional engineering environments, including collaboration with manufacturing, quality, and program teams.•Familiarity with qualification campaigns for aerospace and defense hardware, including ruggedized systems and TPS components.•Experience designing for harsh environments, ensuring durability, thermal resilience, and mechanical integrity under extreme conditions.•Active U.S. Security Clearance (Secret or higher), or the ability to obtain one based on eligibility. This includes meeting background check and other requirements, as required for access to controlled defense-related information and facilities.•Master's degree in mechanical engineering or a related field, or equivalent industry experience in advanced material applications. Job Details FLSA Classifications: Salary (Exempt) Type: Full TimeBusiness Hours: Core (flexibility to support project needs beyond standard times) Salary Range: $80,000 to $140,000Reports to: Engineering Manager Travel: Up to 10% Benefits:•Company paid employee medical, dental and vision insurance•Retirement plan participation (eligibility required)•Paid Sick Leave•Paid Vacation•Paid holidays•Discretionary bonuses•Incentivized cash-based employee referral program for non-management employees Physical Requirements / Work Environments: •Ability to work in office, lab, and manufacturing environments with occasional exposure to noise, dust, and temperature variations.•Must be able to lift and carry up to 35 lbs and perform tasks involving standing, walking, bending, and manual assembly.•Visual acuity required for reading technical drawings, inspecting components, and operating precision instruments.•May require use of PPE such as safety glasses, gloves, and hearing protection, in accordance with Cal/OSHA safety standards.•Occasional travel to supplier or test sites, including outdoor or industrial settings, with adherence to company and OSHA safety protocols. Note: The above statements are intended to describe the general nature and level of work performed. They are not intended to be an exhaustive list of all responsibilities, duties, or skills required. Management may modify or assign additional duties as needed. ITAR REQUIREMENTS:To conform to US Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a US Citizen, lawful permanent resident of the U.S., protected individual as defined by U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Equal Opportunity StatementHera Technologies is an Equal Opportunity Employer, employment with Hera Technologies is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Interplan is a commercial architectural and engineering firm with over 50 years of experience specializing in restaurant and retail design for large nationwide clients. With offices in Orlando and Chicago, our Orlando office is expanding, and we are seeking a talented Mechanical Designer/Engineer to join our team! Responsibilities Single point contact for engineering projects Be able to do building heating/cooling load calculations Design applicable heating/cooling systems Equipment and system specifications Do basic HVAC plans for RTU and split system design Duct sizing and diffuser selection Temperature controls Grease exhaust hood design Grease exhaust/Make-up air systems Basic general exhaust systems Responsible to permit comments Review shop drawing submittals Other duties as assigned Qualifications & Prior Experience 2 - 4 years of professional experience in design required A minimum of 2 years experience in the design of building HVAC systems required Any retail or grocery store design experience a plus Experience in the design of building HVAC systems Has lead projects in mechanical and plumbing designs Has PE or on track to get PE Knowledge/understanding of mechanical building codes Knowledge of heating and cooling load calculations, mechanical materials, systems, and their application Experience with DX, chilled water, and variable air systems Ability to run heating/cooling loads with Carrier and/or Trane programs is required Ability to produce energy code calculations required Proficiency in AutoCAD 2000 or later to produce construction documents in accordance with Interplan standards required Compensation & Benefits Open and collaborative work environment Continuing Education and Professional Development Active employee lead activities committee Medical, Dental, and Vision Insurance Short Term Disability and employer-paid Long Term Disability and Life Insurance Flex Spending and Dependent Care Accounts Employee Assistance Program Health and Wellness Program Paid Holidays Paid Time Off (PTO) 401k with Employer Match, Financial Advisor for employees on ongoing Financial Wellness Education Performance-based Bonus Program Join our team at Interplan and contribute to creating spaces that celebrate Humanity! This is a full-time in-office position with opportunities for growth and development within the company.

Interplan is a commercial architectural and engineering firm with over 50 years of experience specializing in restaurant and retail design for large nationwide clients. With offices in Orlando and Chicago, our Orlando office is expanding, and we are seeking a talented Mechanical Designer/Engineer to join our team! Responsibilities Single point contact for engineering projects Be able to do building heating/cooling load calculations Design applicable heating/cooling systems Equipment and system specifications Do basic HVAC plans for RTU and split system design Duct sizing and diffuser selection Temperature controls Grease exhaust hood design Grease exhaust/Make-up air systems Basic general exhaust systems Responsible to permit comments Review shop drawing submittals Other duties as assigned Qualifications & Prior Experience 2 - 4 years of professional experience in design required A minimum of 2 years experience in the design of building HVAC systems required Any retail or grocery store design experience a plus Experience in the design of building HVAC systems Has lead projects in mechanical and plumbing designs Has PE or on track to get PE Knowledge/understanding of mechanical building codes Knowledge of heating and cooling load calculations, mechanical materials, systems, and their application Experience with DX, chilled water, and variable air systems Ability to run heating/cooling loads with Carrier and/or Trane programs is required Ability to produce energy code calculations required Proficiency in AutoCAD 2000 or later to produce construction documents in accordance with Interplan standards required Compensation & Benefits Open and collaborative work environment Continuing Education and Professional Development Active employee lead activities committee Medical, Dental, and Vision Insurance Short Term Disability and employer-paid Long Term Disability and Life Insurance Flex Spending and Dependent Care Accounts Employee Assistance Program Health and Wellness Program Paid Holidays Paid Time Off (PTO) 401k with Employer Match, Financial Advisor for employees on ongoing Financial Wellness Education Performance-based Bonus Program Join our team at Interplan and contribute to creating spaces that celebrate Humanity! This is a full-time in-office position with opportunities for growth and development within the company.

OUC - The Reliable One is presently seeking a Project Engineer System Protection to join the Trans,Substation & Sys Protect division. At OUC, we don't just work - we're building a bright future of innovation and transformation for future generations. This is a hybrid position offering two remote workdays per week. Must be onsite Tuesdays and Thursdays. We are looking for a motivated Electrical Engineer with a strong background in power systems and protective relaying to support the design and reliability of substation protection and control systems. They will apply engineering expertise to support capital projects while ensuring compliance with NERC standards. OUC is an industry leader and the second largest municipal utility in Florida committed to innovation, sustainability, and our community. OUC's mission is to provide exceptional value to our customers and community by delivering sustainable and reliable services and solutions. Join a team of visionary Change Agents, Strategists, and Community Ambassadors who understand the vital role of diverse experiences in powering creativity and industry transformation. At OUC, each position contributes to the success and achievement of our goals. Click here to learn more about what we do. The ideal candidate will have: * Bachelor's Degree in Electrical Engineering from accredited college or university. * Minimum of four (4) years of experience in the electric utility industry * Must have strong understanding of AutoCAD * Knowledge of NERC Reliability Standards * Ability to interpret Protection & Control drawings * Strong project coordinator and task tracking abilities OUC offers a very competitive compensation and benefits package. Our Total Rewards package includes to cite a few: * Competitive compensation * Low-cost medical, dental, and vision benefits and paid life insurance premiums with no probationary period. * OUC's Hybrid Retirement Program includes a fully-funded cash balance account, defined contribution with employer matching along with a health reimbursement account * Generous paid vacation, holidays, and sick time * Paid parental leave * Educational Assistance Program, to include tuition reimbursement, paid memberships in professional associations, paid conference and training opportunities * Wellness incentives and free access to all on-site OUC fitness facilities * Access to family-oriented recreational areas * Paid Conference and Training Opportunities * Free downtown parking * Hybrid work schedule Click here to view our Benefits Summary. Salary Range: $94,210.39 - $117,763.28 annually - commensurate with experience LOCATION Pershing- 6003 Pershing Ave. Orlando, FL 32822 Please see below a complete Job description for this position. Job Purpose: Design protection and control relaying applications for substations with focus on Protection & Control Settings and SCADA Settings. Expected to develop or possess expertise in protective relay settings calculations and analysis based on current and evolving standards (IEEE, NERC, etc.). Provide design support to field personnel; develop and maintain sufficient level of expertise in use of CAD software for efficient production of engineering work. Primary Functions: * Ensure accomplishment of projects through effective planning, organizing, estimating, scheduling, and monitoring of work activities; * Generate plans and drawings for projects associated with protective relaying and retrofits; * Perform fault studies, relay setting calculations and relay loadability studies; ensure North American Electric Reliability Corporation (NERC) requirements are being met; * Review calculations and relay settings performed by consultants; * Create requisitions, track materials used in relay projects, and approve invoices associated with engineering work; * Coordinate capital projects associated with protective relaying and control devices; * Work with system protection supervisor to track work flow and resources; * Perform line-testing and provide feedback and recommendations regarding system protection operations and maintenance; * Perform other duties as assigned. Technical Requirements: * This work requires an understanding of power systems, transformers, protective relaying, and electrical engineering principles. Additionally, expected to develop or possess expertise in protective relay settings calculations and analysis based on current and evolving standards (IEEE, NERC, etc.). * Working knowledge of all, but not limited to the following: * Interpretation of relay documents and Protection & Control design drawings * Analysis and reporting of fault analysis and relay actions * Experience with power system modeling and relay coordination studies using Aspen One- * Liner software * Familiarity with Aspen Relay Database, SEL-5030 AcSELerator, EnerVista UR, * Software Applications (i.e. AutoCAD (design/drafting software), Setting (vendor) software, electrical engineer software (ASPEN) and fault analysis software; * NERC Reliability standards; * Institute of Electrical and Electronic Engineers (IEEE) standards; * Gantt Chart development; * Vendor instruction books; * Related industry, organizational and departmental policies, practices, and procedures; legal guidelines, ordinances, and laws; * Ability to use Microsoft Office Suite (Word, Excel, Outlook, etc.) and standard office equipment. Education/ Certification/ Years of Experience Requirements: * Bachelor's degree in Electrical Engineering from an ABET accredited college or university; * Minimum of four (4) years of engineering experience in the electric utility industry; * System protection engineering experience (preferred); * Special training to be completed within two (2) years of hire: * Vendor Training * System Protection * Protective Relay Application * Settings and Fault Analysis Software Training * CADD Proficiency * Leadership Training Working Conditions: This job may involve occasional exposure to some disagreeable elements (dust, heat, fumes, cold, noise, vibration, etc.) and accidents are improbable other than minor injuries. This job may involve occasionally with or around chemicals, insects and extreme heat (non-weather). This job may involve occasional exposure to blood borne pathogens and risk of electric shock. Physical Requirements: This job requires constant sitting, typing, reading, and writing. This job requires very frequent speaking and hearing. This job may require occasional driving of a company vehicle. OUC-The Reliable One is an Equal Opportunity Employer who is committed through responsible management policies to recruit, hire, promote, train, transfer, compensate, and administer all other personnel actions without regard to race, color, ethnicity, national origin, age, religion, disability, marital status, sex, sexual orientation, gender identity or expression, genetic information and any other factor prohibited under applicable federal, state, and local civil rights laws, rules, and regulations. EOE M/F/Vets/Disabled

We are looking for motivated mechanical engineers to develop cutting-edge products for our military, governmental, and commercial customers. Our group of mechanical engineers drive products from conception to production including product ideation, research, laboratory/prototype builds, experimental testing, and design for manufacturing. We do not hire discrete design, test, and analysis engineers - our engineers work across all of these roles. This is a hands-on job which will see you design something in CAD, perform FEA/CFD/hand analysis on it, have it fabricated, and physically test and iterate it yourself. As an engineer, you'll have the opportunity to lead your own projects and research. Your creativity and interest determine the next technology you investigate. We design and manufacture a wide variety of products and perform R&D on an even wider variety. Some of our ongoing research efforts that you may be involved with in this role include: HVAC systems for highly-demanding military applications, diesel engine component design and electrification, advanced robotics and additive manufacturing, design and fabrication of ZnS windows for hypersonic vehicles, laser weapon cooling systems, and much more. You will have the opportunity to learn every day, and no two days will be the same. This position may include proposal writing for your next idea, analytical calculations, computational simulations (CFD and FEA), laboratory build and testing, and direct customer interfacing. Company Expectations We are looking for people that fit our values problem solvers; people that can innovate solutions to real-world problems intellectual curiosity and passion for engineering internally motivated; we do not micromanage highly-agile; our work crosses many boundaries, and no two days are alike Position Requirements BSME +3 years of experience OR MSME from an Accredited University GPA not less than 3.3 at all degree levels US Citizenship required due to strict ITAR regulations Strong understanding of mechanical engineering fundamentals Interest in hands-on engineering work in one or more focus areas of Mainstream Prior experience in design, test, and/or analysis with an interest in learning more about each ANSYS experience with willingness to verify design through test Knowledge of testing equipment and setups is a plus CFD/FEA modeling (ANSYS/FLUENT) experience is a plus Mainstream Engineering Corporation is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Are you ready for what's next? Come explore opportunities within Brunswick, a global marine leader committed to challenging conventions and innovating next-generation technologies that transform experiences on the water and beyond. Brunswick believes “Next Never Rests™,” and we offer a variety of exciting careers and growth opportunities within united teams defining the future of marine recreation. Innovation is the heart of Brunswick. See how your contributions will help transform vision into reality: Position Overview: As part of the talented Brunswick Boat Group Design team, you will be responsible for the engineering and integration of fiberglass, mechanical, electrical, laminate, and structural system designs for the Brunswick Boat Group Technology Center. This will require the use of Computer Aided Engineering (CAE) tools to generate 3D surface models for liners, decks, and small parts and strong competency with complex mechanism development. At Brunswick, we have passion for our work and a distinct ability to deliver. Essential Functions: Generate 3D surface models of decks, liners, and small parts to be utilized for 5-axis milling and tooling design Complete engineering of assigned areas of a boat including fiberglass design, purchased parts and hardware development, mechanical system/hose routing, electrical layout, etc. Design, engineer, and validate complex hinges and mechanisms for supplier fabrication using 3D models and 2D specification drawings Provide accurate material and component specification for the sourcing of new and replacement components Work with suppliers on the development of new systems and components to ensure continuous improvement in the quality and value of our boats systems Ensure that new designs and components meet the cost, performance, and functional requirements of the new and enhancement boat programs Review and approve engineering drawings and assembly prints for new boat programs Participate in manufacturing integration activities to ensure successful launches of new products and technologies as well as continuous improvement activities Support manufacturing and customer service on issues resolution Ensure that designs have been fully validated and that they meet necessary system specifications and performance requirements Utilize warranty data to identify issues related to mechanical systems for mitigation purposes Provide technical evaluations and reports on issues for customer service and field problems Ensure compliance with all necessary industry, domestic, and international government regulations Ensure that all materials used in the manufacture of finished products have been tested and approved for quality and reliability Perform final system design verification tests as needed Ensure timely and adequate completion of all applicable phases of project Apply relevant voice of the customer and systems engineering input to designs Must be willing to travel (minimum 10%) Diversity of thought and experiences is fundamental when imagining the unimaginable. Certain skillsets/experiences are necessary; however, others can be developed along the way. Required Qualifications: Bachelor Degree in Mechanical Engineering, Naval Architecture, Marine Engineering, or related discipline Consideration will be given for candidates with significant work experience in lieu of education requirements 3-5 years experience in marine product design preferred with knowledge of production processes Computer Aided Design experience (Siemens NX preferred and/or experience with SolidWorks, Catia, Creo or Pro-E) Excellent 3-D solid and free-surface modelling skills required Familiarity with Finite Element Analysis Proficient understanding of component and assembly interactions at the system level Lean Six Sigma certification or experience is a plus Commitment to quality and standards that are accepted by the industry Must interface well with other employee's and departments throughout Brunswick as well as outside vendors, dealers and retail customers Must be able to work extra hours required to assume timely completion of critical projects Proficiency in all Microsoft office applications Strong problem solving and decision-making abilities Passion for the recreational marine industry Working Conditions: While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; and toxic or caustic chemicals. The noise level in the work environment is usually moderate. While performing the duties of this job, the employee is frequently required to stand, walk, and sit. The employee is occasionally required to use hands to handle or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; and toxic or caustic chemicals. The noise level in the work environment is usually moderate. The anticipated pay range for this position is $69,000 to $110,500 annually. The actual base pay offered will vary depending on multiple factors including job-related knowledge/skills, relevant experience, business needs, and geographic location. In addition to base pay, this position is eligible for an annual discretionary bonus. At Brunswick, it is not typical for an individual to be hired at or near the top end of the salary range for their role. Compensation decisions are dependent upon the specifics of the candidate's qualifications and the business context. This position is eligible to participate in Brunswick's comprehensive and high-quality benefits offerings, including medical, dental, vision, paid vacation, 401k (up to 4% match), Health Savings Account (with company contribution), wellbeing program, product purchase discounts and much more. Details about our benefits can be found here. Why Brunswick: Whatever tomorrow brings, we'll be at the leading edge. As the clear leader in the marine industry, we're committed to our values and supporting our exceptional people. We offer valuable benefits including a competitive 401(k) plan with company match, health benefits, paid time off, a robust Wellness Program, and much more. In addition, we're proud of being recognized for making a splash with numerous awards! About Brunswick Boat Group Brunswick Boat Group is home to a diverse portfolio of iconic marine brands, including Bayliner, Boston Whaler, Crestliner, Cypress Cay, Harris, Heyday, Lowe, Lund, Navan, Princecraft, Protector, Quicksilver, Rayglass, Sea Ray, Spartan, Thunder Jet, and Uttern. Each brand carries a legacy of innovation, craftsmanship, and performance that has shaped the boating industry worldwide. Across our fiberglass and aluminum manufacturing facilities, our team members are the driving force behind our success. We foster a culture rooted in safety, integrity, continuous improvement, and personal growth. Whether you're building unsinkable legends, pioneering wake sports, or crafting fishing and pontoon boats trusted for generations, you'll be part of a united team committed to delivering exceptional experiences on the water. Next is Now! We value growth and development, recognizing that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. Brunswick is an Equal Opportunity Employer and considers all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other characteristic protected by federal, state, or local law. Diversity of experience and skills combined with passion is key to innovation and inspiration and we encourage individuals from all backgrounds to apply. If you require accommodation during the application or interview process, please contact ****************************** for support. For more information about EEO laws, - click here Brunswick and Workday Privacy Policies Brunswick does not accept applications, inquiries or solicitations from unapproved staffing agencies or vendors. For help, please contact our support team at: ****************************** or ************. All job offers will come to you via the candidate portal you create when applying through a posted position through https:///************************** If you are ever unsure about what is being required of you during the application process or its source, please contact HR Shared Services at ************ or ******************************. #Brunswick Corporation

At Salas O'Brien we tell our clients that we're engineered for impact. This passion for making a difference applies just as much to our team as it does to our projects. That's why we're committed to living our values every day: inspiring, achieving, and connecting as shared owners of our success with a focus on a sustainable future. Building for the long-term means that all of our team members can expect to work on amazing projects with a people-first approach to problem solving. It also means that each member of our team has truly limitless potential to build a unique, meaningful, and high-impact career-and they'll receive great total rewards along the way. About Us: Founded in 1975, Salas O'Brien is an employee-owned engineering and professional services firm focused on achieving impact for our clients, our team, and the world. We know that tomorrow's requirements are today's opportunities, and we are here to design lasting solutions for pressing challenges. We work across a variety of industries providing integrated engineering and consulting services. Our specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. Our technical expertise is paired with an exceptional team of business development, human resources, finance and accounting, information technology, and marketing professionals, all of whom play a key role in bringing our commitments to life every day. Responsibilities: Work tasks will vary and require flexibility and a desire for diversity in the engineering field. Primary work to be performed includes drafting using either AutoCAD or Revit, reviewing and creating drawing markups using PDF editing tools such as Bluebeam Revu, reviewing HVAC and plumbing calculations, reviewing applicable international and local codes and standards (e.g., UFC, IFC), developing cost estimates, and assisting with the generation and review of job specifications and report writing. Typical job duties consist of applying these tasks through 2D and 3D drawing production, HVAC and plumbing system calculations and analysis, evaluation of existing facility systems and equipment, and preparation of technical documentation. Qualifications and Experience: Must be currently enrolled in a Mechanical Engineering program at a four-year ABET university or college with preferred targeted graduation date within 1 year (preferred). Will consider interns who are graduating within 2 years, depending on our needs. Must be able to work part-time, maximum 20 hours on average each work week and have reliable transportation. During the Summer months, we often have additional hours available to interns. Location: Merritt Island, FL Equal Opportunity Employment Statement Salas O'Brien provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state/provincial, or local laws. Salas O'Brien will accommodate the disability-related needs of applicants as required by law.