Assembler jobs at Serta Simmons Bedding - 721 jobs

Shift: 1st Shift | Full-Time Pay: $24.12 - $28.49 = ($1.50) At Johnson Controls, we're not just constructing buildings-we're creating smarter, healthier, and more sustainable environments for generations to come. ESSENTIAL DUTIES & RESONSIBILITIES ·Use spray equipment to apply paint and primers. ·Responsible in selecting paint color for specific jobs. ·Clean, prepare surfaces to be painted, and mask as required. ·Clean, wipe up excess paint, remove masking, visually check for runs, shadows, improper coverage, touch up, and/or paint thickness. ·Mixes, thins, and otherwise prepares paints for application. ·Maintain paint supplies and materials. ·Maintains related spraying equipment. ·Maintain orderliness and cleanliness of work area, including paint kitchen, booth and all surrounding areas associated with paint. Qualified to assemble Air handling Units depending on paint work load. Assemble pipe chases, and hoods as required. Label Units as required Use test equipment and perform visual quality checks Responsible for reporting work related injuries and near misses to supervision. Responsible for wearing all required PPE and following applicable safety/environmental rules. Responsible for correcting or reporting unsafe conditions observed within the plant. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. Must have current forklift license and be certified for Respirator use. EDUCATION/EXPERIENCE High School diploma or general education degree (GED); or one to three months related experience and/or equivalent combination of education and experience. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to work near moving mechanicals parts. The employee is occasionally exposed to wet or humid conditions (non-weather); work in high, precarious places; fumes or airborne particles; outdoor weather conditions; extreme cold (non-weather); extreme heat (non-weather); The noise level in the work environment is usually moderate. Employee will be required to wear respirator and Tyvek suit. REQUIREMENTS: Requires a high school diploma/GED and previous experience in an industrial or manufacturing environment. Excellent communication & interpersonal skills. Demonstrates an attention to detail. Ability to read, communicate and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, blueprints and engineering drawings in the English Language. WORKING CONDITIONS AND PHYSICAL REQUIREMENTS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to work in a noisy, dusty, industrial/manufacturing environment, and exposed to non-toxic fumes, chemicals, grease and oils Ability to work with machinery and moving parts Ability to operate crane, truck, motor vehicles Ability to work with moving vehicles, ladders, and scaffolding Ability to work at heights, and in confined spaces Ability to properly lift/carry/push/pull/manipulate/transport up to 30 lbs Ability to occasionally lift up to 50 lbs, and frequently lift up to 40 lbs Ability to work in a non-climate controlled environment Ability to work in repetitive motions and pressure involving fingers, hands, and wrists The work requires some physical exertion such as long periods of standing or walking over hard concrete surface Exposure to recurring bending, crouching, stooping, kneeling, sitting, climbing, stretching, or similar activities Ability to reach at high levels Ability to read, write, speak and communicate in the English Language Must have the physical strength and ability to frequently work more than 40 hours weekly HIRING HOURLY RANGE: $24.12 - $28.49 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** #HourlyJobs

Job Posting Start Date 12-23-2025 Job Posting End Date 03-31-2026 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary Principle Accountabilities: Reads work orders, follows production drawings and sample assemblies. Positions and aligns parts in specified relationship to each other in jig, fixture or other holding devices. Crimps, stakes, screws, bolts, rivets, welds, solders, cements, press fits or performs similar operations to join or secure parts in place. Mounts assembled components to boards or units. May install multi-level subassemblies and modules into Racks using complex configurations. Installs finished assemblies or subassemblies in cases and cabinets. Assembles and attaches hardware, such as caps, clamps, knobs and switches, to assemblies. Performs intermediate assembly tasks, such as potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, impregnating and color-coding parts and assemblies. Tends machines that press, shape or wind component parts. Performs online go-not-go testing and inspection to ensure parts and assemblies meet production specifications and standards. Sets up station with the correct documents and components per assembly drawing. Handles/install polarized/non-polarized components on designated location on product. Adjusts or trims materials from components to achieve specified electrical requirements or dimensional characteristics. Assist in performing repair work. Communicates any process problems with peers, leads, supervisors and/or engineers. Perform preventative maintenance on production line machinery. SPECIALIZED JOB RESPONSIBILITIES may be required for certain positions. These could include one or more of the following duties: Connects component lead wires to printed circuit or routes and connects wires between individual component leads and other components, connectors, terminals and contact points. Will complete light physical tasks such as changing conveyor width, loading boards on pallets Performs solder masking, taping non-solderable area, installing e-prom into the sockets and placing Rev labels on the boards per production's documents. Inspects nonconforming solder join defects on PTH and SMT chips component. Collects data using the SPC charts. Fills out returned forms of conforming and nonconforming materials and prepares set up kits for incoming shift. Completes basic touch up, removal and placement, inspecting own work and the work of others following applicable work instructions and quality procedures. Detects nonconforming defects and their defect codes to enter into shop floor control systems. Assists, instructs and qualifies new operators. Reports deviations from standard procedures to engineering or supervisor and provides inputs on quality improvements. Systems - Assemble complex units for wiring, connecting difference sub-assemblies and nodes into large rack systems. Education / Experience Completion of a high school degree or equivalent is preferred. Typically requires 1 year of electronic assembly or related experience. Knowledge / Skills / Abilities Basic mechanical skills. Demonstrates basic manufacturing line knowledge and participates in process. Manual dexterity required for operating machinery and computers. Good attention to detail. Excellent eye-hand coordination required. Requires understanding of and ability to use a wide variety of tools. Basic computer skills. Must be able to use a microscope. Ability to read and comprehend simple instructions. Ability to effectively present information in one-on-one and small group situations to other employees, leads and supervisors of the organization. Scope / Impact Low impact, limited to the specific work area. Decision Making / Discretion Limited expectations to make decisions outside immediate work assignments. Decisions only affect individual tasks. Supervision / Leadership Able to understand and receive work instructions from line lead, supervisor/manager and manufacturing support. Receives detailed verbal and written general instructions on new assignments. Requires close supervision. Work Environment: While performing the duties of this job, the employee is regularly exposed to work that requires repetitive motion. Employee may be occasionally exposed to toxic or caustic chemicals. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Have the ability, visual acuity and manual aptitude to recognize and accurately assemble/install components according to manufacturing documentation. While performing the duties of this job, the employee is regularly required to sit, handle small components, and reach with hands and arms. The employee may be required to use a microscope for long periods of time. The employee frequently is required to talk and hear. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 20 pounds. Systems employees may lift up to 50 pounds and push 200 pound racks. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryOperations Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

Job Posting Start Date 11-14-2025 Job Posting End Date 01-30-2026 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a LV Switchgear Wiring Technician located in Dallas, Texas. Reporting to the Production Manager, the LV Switchgear Wiring Technician role is responsible for prepping wiring subassemblies for our switchgear projects. Shift: 6:00 AM - 2:30 PM What a typical day looks like: Read and interpret work orders, manufacturing procedures, work instructions, wiring diagrams, and prints to manufacture wiring subassemblies for relay and control panels Crimp, strip, cut, pull, and bundle wiring according to plans Ensure wiring is properly labeled and marked Connect cut wires to components, and routing the wire and cables in an orderly fashion Ensure quality workmanship of all wires and components Maintain a safe, clean, and orderly work area Complete other duties as assigned The experience we're looking to add to our team: High school diploma or equivalent 1-2 years of experience in wiring or installing electrical components OR completion of a technical vocational program Strong attention to detail and ability to perform work accurately Knowledge of manufacturing, equipment maintenance, and safety management Reading comprehension skills with the ability to interpret and follow written directions, blueprints, and engineering diagrams Basic math skills to meet technical specifications and measurements Basic understanding of tools (ex. Tape measure, impact drill, wire crimpers, etc.) Physical Requirements: Prolonged periods of standing, bending, kneeling, and performing repetitive tasks. Must be able to lift up to 35 pounds at a time. Must have manual dexterity in order to assemble products or machines as directed. Must have excellent hand-eye coordination. Ability to differentiate between colored wires, tabs, and electronic components. Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryOperations Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

About Custom Assembly, Inc. Custom Assembly, Inc. specializes in the assembly, warehousing, and distribution of recreational vehicles. We are a family run organization that has been in business for 30+ years. Schedule: This is a full-time, first-shift (6am-2:30pm ) position with the potential for overtime. Pay: $18.45/hour Benefits: Medical, Dental and Vision Coverage after 30 days Paid Time Off Paid Holidays Supplemental Benefits Company Paid Life Insurance 401(k) Plan with company match Job Description: Your daily responsibilities will include, but are not limited to: Assembling recreational vehicles according to manufacturer specifications Installing roll cages, mirrors, and other components on recreational vehicles Utilizing required safety equipment Using a provided starter kit of tools, or your own if preferred Paying close attention to detail Qualifications: Proficient with basic hand tools Mechanically inclined Ability to follow precise building instructions Forklift experience preferred. Preferred Knowledge and Experience with the Following Tools: 3/8-inch impact wrench Metric wrenches and sockets (8mm-19mm) Low-pressure tire gauge Cutting pliers Fuel pump Hoist 3/8-inch ratchet set Forklift operation Sockets (22mm and 32mm, occasionally) 16-piece flathead and Phillips head screwdriver set Rubber mallets Torx head sockets Klever Cutter utility knife Additional Qualifications: Exemplify and promote company culture Seek improvement and simplify system protocols Strong written, verbal, and interpersonal skills Experience in planning and execution with excellent time management and organizational skills Ability to work independently Capability to prioritize and manage multiple duties/projects Custom Assembly is an Equal Opportunity Employer that participates in the E-Verify process. We maintain a Drug-Free Workplace. A Criminal Background Report and Drug Screenings will be completed prior to employment. Custom Assembly offers Medical, Dental, and Vision benefits, and a 401K plan with company match.

Join Our Growing Team at Our Newest Location! Are you ready to be part of something exciting from the very beginning? We're hiring for Assembly positions at our newest facility, and this is your chance to get in on the ground floor! * We offer: * A consistent 4-day workweek (10-hour shifts) * Outstanding benefits * A top-tier incentive program * Real opportunities for advancement as we continue to expand If you're motivated, reliable, and looking for a workplace where your contributions matter, we'd love to hear from you! Apply today! SUMMARY Assembles generator enclosures, tanks and their subassemblies following blueprints and other written and verbal specifications by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned: * Reads and understands blueprints and bill of material. * Assembles functional parts of enclosures and tanks using hand tools, power tools (cordless drills, impact gun, etc.) levels, plumb bobs, and straight edges. * Uses forklifts, aerial lifts, cranes, ladders and other lifting apparatus to aide in the assembly process. * Assists in the assembly and installation of electrical and electronic components (electrical enclosures, transformers, etc. all electrical connections are done by qualified personnel), pipe systems and plumbing, machinery and equipment. * Assembles both small and large sub-assemblies according to prints or drawings. * Reads bill of material to package parts/kits to customer requirements. * Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine assembly sequence, and setup requirements * Follows work instructions from general description. Works with other team members to troubleshoot mechanical/fit issues in a satisfactory manner. * Keeps work area clean and organized. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to handle or feel; and reach with hands and arms. The employee frequently is required to stoop, kneel, crouch, or crawl. The employee is occasionally required to climb or balance and talk or hear. The employee must frequently lift and/or move up to 25 pounds and may occasionally lift and/or move up to 80 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and fumes or airborne particles.

Join Our Growing Team at Our Newest Location! Are you ready to be part of something exciting from the very beginning? We're hiring for Assembly positions at our newest facility, and this is your chance to get in on the ground floor! • We offer: • A consistent 4-day workweek (10-hour shifts) • Outstanding benefits • A top-tier incentive program • Real opportunities for advancement as we continue to expand If you're motivated, reliable, and looking for a workplace where your contributions matter, we'd love to hear from you! Apply today! SUMMARY Assembles generator enclosures, tanks and their subassemblies following blueprints and other written and verbal specifications by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned: Reads and understands blueprints and bill of material. Assembles functional parts of enclosures and tanks using hand tools, power tools (cordless drills, impact gun, etc.) levels, plumb bobs, and straight edges. Uses forklifts, aerial lifts, cranes, ladders and other lifting apparatus to aide in the assembly process. Assists in the assembly and installation of electrical and electronic components (electrical enclosures, transformers, etc. all electrical connections are done by qualified personnel), pipe systems and plumbing, machinery and equipment. Assembles both small and large sub-assemblies according to prints or drawings. Reads bill of material to package parts/kits to customer requirements. Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine assembly sequence, and setup requirements Follows work instructions from general description. Works with other team members to troubleshoot mechanical/fit issues in a satisfactory manner. Keeps work area clean and organized. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to handle or feel; and reach with hands and arms. The employee frequently is required to stoop, kneel, crouch, or crawl. The employee is occasionally required to climb or balance and talk or hear. The employee must frequently lift and/or move up to 25 pounds and may occasionally lift and/or move up to 80 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and fumes or airborne particles.

Since 1913, Marathon Electric has been dedicated to providing customers with quality motors and generators for targeted applications. Marathon Electric became part of WEG Group in 2024. Founded in 1961, WEG is a global electric-electronic equipment company, operating mainly in the capital goods sector with solutions in electric machines, automation and paints for several sectors, including infrastructure, steel, pulp and paper, oil and gas, mining, among many others. WEG stands out in innovation by constantly developing solutions to meet the major trends in energy efficiency, renewable energy and electric mobility. With manufacturing units in 12 countries and present in more than 135 countries, WEG has more than 40,000 employees worldwide. We value generation of professional and personal development opportunities, human rights, diversity and the environment. We invest in solutions for reduction of carbon emissions and encourage our people to be engaged in social activities where we have our operations, with focus on health and education. We work as a team within a friendly way allowing sharing of ideas. We get together and share knowledge and skills to continuously improve our decision-making process. GENERAL ASSEMBLY TECHNICIAN: Insert Connect Test Team We are looking for skilled Assemblers to join our team at the Wausau location. Assemblers work in a team environment to set up work areas and assemble large motors and generators to customer specifications with Safety and Quality as top priorities. Join our growing team and become part of a great place to work!! ESSENTIAL DUTIES AND RESPONSIBILITIES: Includes the following, other duties may be assigned: * Insert, connect, test, coil wind, and insulation cut. * Perform sometimes complex assembly processes, often using various hand and small power tools. * Review of work instructions, basic prints and set up instructions for work processes. * Verify part numbers on parts and materials to be used in assembly process. * May require some work station set up for staging material kits, basic machine settings and other requirements. * Often requires checking work for defects, including visual inspection and use of various measuring equipment. * Notify Team lead person of any deviations in product quality from prior operations or current assembly to ensure in line defects are recognized and properly corrected before moving on to next assembly process. * Accurately and fully complete all necessary documentation and paperwork for parts/processes completed. QUALIFICATIONS: * Ability to read and comprehend established procedures for safety, quality and general assembly. * Excellent hand-eye coordination and physical condition. * Proven experience as an assembler in a general manufacturing setting desired. * Good communication skills (verbal and written) JOB TYPE: Full-time BENEFITS: * 401(k) * 401(k) matching * Dental insurance * Employee assistance program * Employee discount * Flexible spending account * Health insurance * Health savings account * Life insurance * Paid time off * Referral program * Tuition reimbursement * Vision insurance SCHEDULE: * 10-hour shift (Mon-Thurs) Overtime Available * Day shift Founded in 1961, WEG is a global electric-electronic equipment company, operating mainly in the capital goods sector with solutions in electric machines, automation and paints for several sectors, including infrastructure, steel, pulp and paper, oil and gas, mining, among many others. WEG stands out in innovation by constantly developing solutions to meet the major trends in energy efficiency, renewable energy and electric mobility. With manufacturing units in 17 countries and present in more than 135 countries, the company has more than 45,000 employees worldwide. WEG's net revenue reached R$ 32.5 billion in 2023, 52.9% from outside Brazil. Our business areas are divided as follows. Industrial Electro-Electronic Equipment This area includes electric motors, drives and industrial automation equipment and services, and maintenance services. Electric motors and other related equipment find applications in practically all industrial segments, in equipment such as compressors, pumps and fans, for example. Energy Generation, Transmission and Distribution (GTD) Products and services included in this area are electric generators for hydraulic and thermal power plants (biomass), hydro turbines (small hydroelectric plants or PCH, and hydroelectric generators or CGH)), wind turbines, transformers, substations, control panels and system integration services. Commercial and Appliance Motors In this business area, our focus is the market of single phase motors for durable consumer goods, such as washing machines, air conditioners, water pumps, among others. Paints and Varnishes In this area, which includes liquid paints, powder paints, and electro-insulating varnishes, we have a very clear focus on industrial applications in Brazil and are expanding to Latin America and other regions.

Since 1913, Marathon Electric has been dedicated to providing customers with quality motors and generators for targeted applications. Marathon Electric became part of WEG Group in 2024. Founded in 1961, WEG is a global electric-electronic equipment company, operating mainly in the capital goods sector with solutions in electric machines, automation and paints for several sectors, including infrastructure, steel, pulp and paper, oil and gas, mining, among many others. WEG stands out in innovation by constantly developing solutions to meet the major trends in energy efficiency, renewable energy and electric mobility. With manufacturing units in 12 countries and present in more than 135 countries, WEG has more than 40,000 employees worldwide. We value generation of professional and personal development opportunities, human rights, diversity and the environment. We invest in solutions for reduction of carbon emissions and encourage our people to be engaged in social activities where we have our operations, with focus on health and education. We work as a team within a friendly way allowing sharing of ideas. We get together and share knowledge and skills to continuously improve our decision-making process. GENERAL ASSEMBLY TECHNICIAN: Insert Connect Test Team We are looking for skilled Assemblers to join our team at the Wausau location. Assemblers work in a team environment to set up work areas and assemble large motors and generators to customer specifications with Safety and Quality as top priorities. Join our growing team and become part of a great place to work!! ESSENTIAL DUTIES AND RESPONSIBILITIES: Includes the following, other duties may be assigned: Insert, connect, test, coil wind, and insulation cut. Perform sometimes complex assembly processes, often using various hand and small power tools. Review of work instructions, basic prints and set up instructions for work processes. Verify part numbers on parts and materials to be used in assembly process. May require some work station set up for staging material kits, basic machine settings and other requirements. Often requires checking work for defects, including visual inspection and use of various measuring equipment. Notify Team lead person of any deviations in product quality from prior operations or current assembly to ensure in line defects are recognized and properly corrected before moving on to next assembly process. Accurately and fully complete all necessary documentation and paperwork for parts/processes completed. QUALIFICATIONS: Ability to read and comprehend established procedures for safety, quality and general assembly. Excellent hand-eye coordination and physical condition. Proven experience as an assembler in a general manufacturing setting desired. Good communication skills (verbal and written) JOB TYPE: Full-time BENEFITS: 401(k) 401(k) matching Dental insurance Employee assistance program Employee discount Flexible spending account Health insurance Health savings account Life insurance Paid time off Referral program Tuition reimbursement Vision insurance SCHEDULE: 10-hour shift (Mon-Thurs) Overtime Available Day shift Founded in 1961, WEG is a global electric-electronic equipment company, operating mainly in the capital goods sector with solutions in electric machines, automation and paints for several sectors, including infrastructure, steel, pulp and paper, oil and gas, mining, among many others. WEG stands out in innovation by constantly developing solutions to meet the major trends in energy efficiency, renewable energy and electric mobility. With manufacturing units in 17 countries and present in more than 135 countries, the company has more than 45,000 employees worldwide. WEG's net revenue reached R$ 32.5 billion in 2023, 52.9% from outside Brazil. Our business areas are divided as follows. Industrial Electro-Electronic Equipment This area includes electric motors, drives and industrial automation equipment and services, and maintenance services. Electric motors and other related equipment find applications in practically all industrial segments, in equipment such as compressors, pumps and fans, for example. Energy Generation, Transmission and Distribution (GTD) Products and services included in this area are electric generators for hydraulic and thermal power plants (biomass), hydro turbines (small hydroelectric plants or PCH, and hydroelectric generators or CGH)), wind turbines, transformers, substations, control panels and system integration services. Commercial and Appliance Motors In this business area, our focus is the market of single phase motors for durable consumer goods, such as washing machines, air conditioners, water pumps, among others. Paints and Varnishes In this area, which includes liquid paints, powder paints, and electro-insulating varnishes, we have a very clear focus on industrial applications in Brazil and are expanding to Latin America and other regions.

Do you want a job in which you can grow your skills? Don't miss out on our weekend shift power products assembly position! Join our EK family today for new opportunities. Assembles generator enclosures, tanks and their subassemblies following blueprints and other written and verbal specifications by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned: * Reads and understands blueprints and bill of material. * Assembles functional parts of enclosures and tanks using hand tools, power tools (cordless drills, impact gun, etc.) levels, plumb bobs, and straight edges. * Uses forklifts, aerial lifts, cranes, ladders and other lifting apparatus to aide in the assembly process. * Assists in the assembly and installation of electrical and electronic components (electrical enclosures, transformers, etc. all electrical connections are done by qualified personnel), pipe systems and plumbing, machinery and equipment. * Assembles both small and large sub-assemblies according to prints or drawings. * Reads bill of material to package parts/kits to customer requirements. * Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine assembly sequence, and setup requirements * Follows work instructions from general description. Works with other team members to troubleshoot mechanical/fit issues in a satisfactory manner. * Keeps work area clean and organized. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to handle or feel; and reach with hands and arms. The employee frequently is required to stoop, kneel, crouch, or crawl. The employee is occasionally required to climb or balance and talk or hear. The employee must frequently lift and/or move up to 25 pounds and may occasionally lift and/or move up to 80 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and fumes or airborne particles.

SUMMARY Assembles generator enclosures, tanks and their subassemblies following blueprints and other written and verbal specifications by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned: Reads and understands blueprints and bill of material. Assembles functional parts of enclosures and tanks using hand tools, power tools (cordless drills, impact gun, etc.) levels, plumb bobs, and straight edges. Uses forklifts, aerial lifts, cranes, ladders and other lifting apparatus to aide in the assembly process. Assists in the assembly and installation of electrical and electronic components (electrical enclosures, transformers, etc. all electrical connections are done by qualified personnel), pipe systems and plumbing, machinery and equipment. Assembles both small and large sub-assemblies according to prints or drawings. Reads bill of material to package parts/kits to customer requirements. Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine assembly sequence, and setup requirements Follows work instructions from general description. Works with other team members to troubleshoot mechanical/fit issues in a satisfactory manner. Keeps work area clean and organized. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to handle or feel; and reach with hands and arms. The employee frequently is required to stoop, kneel, crouch, or crawl. The employee is occasionally required to climb or balance and talk or hear. The employee must frequently lift and/or move up to 25 pounds and may occasionally lift and/or move up to 80 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and fumes or airborne particles.

Job DescriptionSalary: The Rough Fab Assembler (RFA) is responsible for assembling equipment in preparation for wiring, testing, and final assembly. The RFA will fulfill many roles within the process of assembling electronics equipment. The RFA will assemble off-the-shelf OEM equipment and will integrate custom panels and custom brackets to create unique assemblies per project needs. The RFA will receive shipments, distribute parts, organize parts by project, ship assemblies, maintain warehouse, maintain tools and equipment used in the process, and fulfill any other tasks as required by supervisors and management. Rough Fab Job Duties & Responsibilities Read and understand assembly drawings Ensure that all required parts for assembly are available Mark cutting lines and drilling holes on materials Confirm proper fitting and alignment of materials to be assembled Maintain production schedule Maintain clean and organized work area Clean and maintain tools Assemble parts in equipment racks Prepare packaged assemblies for shipment Receive packages Load and ship packages and assemblies Obey safety requirements Requirements Proven work experience as a Fabricator Good dexterity Attention to detail Good organizational skills Ability to lift 50 lbs. Clean work area and warehouse Drivers license with clean driving record Physical stamina Ability to read and comprehend assembly drawings Proficiency with operating the following hand tools: Drill Screw Gun Circular Saw Jigsaw Ability to operate a Fork Lift Good interpersonal skills EOE/M/F/Veteran/Disabled

The Rough Fab Assembler (RFA) is responsible for assembling equipment in preparation for wiring, testing, and final assembly. The RFA will fulfill many roles within the process of assembling electronics equipment. The RFA will assemble off-the-shelf OEM equipment and will integrate custom panels and custom brackets to create unique assemblies per project needs. The RFA will receive shipments, distribute parts, organize parts by project, ship assemblies, maintain warehouse, maintain tools and equipment used in the process, and fulfill any other tasks as required by supervisors and management. Rough Fab Job Duties & Responsibilities Read and understand assembly drawings Ensure that all required parts for assembly are available Mark cutting lines and drilling holes on materials Confirm proper fitting and alignment of materials to be assembled Maintain production schedule Maintain clean and organized work area Clean and maintain tools Assemble parts in equipment racks Prepare packaged assemblies for shipment Receive packages Load and ship packages and assemblies Obey safety requirements Requirements Proven work experience as a Fabricator Good dexterity Attention to detail Good organizational skills Ability to lift 50 lbs. Clean work area and warehouse Driver's license with clean driving record Physical stamina Ability to read and comprehend assembly drawings Proficiency with operating the following hand tools: Drill Screw Gun Circular Saw Jigsaw Ability to operate a Fork Lift Good interpersonal skills EOE/M/F/Veteran/Disabled

The Assembler I will assemble and inspect product to ensure the highest quality product is provided to our customer. This role requires a person that is self-motivated, has a strong attention to detail and a continuous improvement mindset. BENEFITS & PAY Pay based on skill and experience Health Insurance plus Dental & Vision coverage 401K Responsibilities • Complete basic product assembly according to engineering standards, diagrams and drawings. • Perform a variety of tasks ranging from repetitive to non-repetitive product assembly operations. • Complete shop floor traveler documents. • Conduct quality inspections on processing line in accordance with quality specifications. • May disassemble, modify, rework, reassemble and test experimental assemblies. • Keep working area safe, clean and organized. • May work in other areas of the facility, as needed. • Ability to lift and move up to 50 pounds of materials and requires standing and moving. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to reach with hands and arms and talk or hear. The employee is occasionally required to walk. PREFERRED QUALIFICATIONS High school diploma or general equivalency diploma (GED). Prior related work experience (1+ years) Ability to read and interpret blueprints Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals REQUIRED QUALIFICATIONS Must be able to read, write, and communicate in English Ability to define problems, collect data, establish facts, and draw and apply valid conclusions Regularly use hands to finger, handle, or feel objects, tools, or controls and reach with hands and arms Regularly lift and/or move up to 15 pounds, frequently lift and/or move up to 30 pounds, and occasionally lift and/or move up to 50 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. COMPANY OVERVIEW Boyd is the world's leading innovator in sustainable engineered material and thermal solutions that make our customers' products better, safer, faster, and more reliable. We develop and combine technologies to solve ambitious performance targets in our customers' most critical applications. By implementing technologies and material science in novel ways to seal, protect, cool, and interface, Boyd has continually redefined the possible and championed customer success for over 90 years. As a unique provider of innovative solutions, Boyd is in a multitude of industries such as aerospace, medical, consumer electronics and recreational vehicles to name only a few. We partner and serve some of the top organizations around the world. Our diversification and our global reach in the US, Asia and Europe, mean we offer many ways for you to grow and develop your career. We push the limits of your potential and provide you with the tools you need for a successful career. All Job Posting Locations (Location) Wetumpka Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All Job Posting Locations (Location) Wetumpka Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

The Assembler I will assemble and inspect product to ensure the highest quality product is provided to our customer. This role requires a person that is self-motivated, has a strong attention to detail and a continuous improvement mindset. BENEFITS & PAY * Pay based on skill and experience * Health Insurance plus Dental & Vision coverage * 401K Responsibilities * Complete basic product assembly according to engineering standards, diagrams and drawings. * Perform a variety of tasks ranging from repetitive to non-repetitive product assembly operations. * Complete shop floor traveler documents. * Conduct quality inspections on processing line in accordance with quality specifications. * May disassemble, modify, rework, reassemble and test experimental assemblies. * Keep working area safe, clean and organized. * May work in other areas of the facility, as needed. * Ability to lift and move up to 50 pounds of materials and requires standing and moving. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to reach with hands and arms and talk or hear. The employee is occasionally required to walk. PREFERRED QUALIFICATIONS * High school diploma or general equivalency diploma (GED). * Prior related work experience (1+ years) * Ability to read and interpret blueprints * Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals REQUIRED QUALIFICATIONS * Must be able to read, write, and communicate in English * Ability to define problems, collect data, establish facts, and draw and apply valid conclusions * Regularly use hands to finger, handle, or feel objects, tools, or controls and reach with hands and arms * Regularly lift and/or move up to 15 pounds, frequently lift and/or move up to 30 pounds, and occasionally lift and/or move up to 50 pounds. * Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. COMPANY OVERVIEW Boyd is the world's leading innovator in sustainable engineered material and thermal solutions that make our customers' products better, safer, faster, and more reliable. We develop and combine technologies to solve ambitious performance targets in our customers' most critical applications. By implementing technologies and material science in novel ways to seal, protect, cool, and interface, Boyd has continually redefined the possible and championed customer success for over 90 years. As a unique provider of innovative solutions, Boyd is in a multitude of industries such as aerospace, medical, consumer electronics and recreational vehicles to name only a few. We partner and serve some of the top organizations around the world. Our diversification and our global reach in the US, Asia and Europe, mean we offer many ways for you to grow and develop your career. We push the limits of your potential and provide you with the tools you need for a successful career. All Job Posting Locations (Location) Wetumpka Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All Job Posting Locations (Location) Wetumpka Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

SNC, An Allient Company, a premier manufacturer and marketer of custom electrical transformers, utility products, and information and communication products are currently seeking an Assembler to join our team in Oshkosh, Wisconsin! The Assembler - Transformer Lamination will perform various assembly operations in their entirety as assigned, primarily concerned with the lamination of electrical transformers and the installation of mounting brackets and insulating materials in accordance with prescribed practices and procedures. Apply now! RESPONSIBILITIES: Receive direction from Supervisor and instructions relative to work assignment from Supervisor or lead person. Work from established job specifications, departmental card files, prescribed practices and procedures, written and verbal instructions. Operate specified laminating machine. Set E, I gauge bars and micro-switches to specified height and/or exchange complete drive units. Load left and right magazines with metal lamination, position coil, activate machine to automatically feed alternate laminations to maximum fullness. Complete laminating process by hand, using (2) 1/8” iron or greater and stacks 3” or greater. Use hoists, low lift hand truck and carts to position or move transformers to assigned locations, use pneumatic tools, ratchets, wrenches and applicable equipment and hand tools. Install various insulating materials, fasten, mount, tighten, square, gauge brackets and specified hardware to meet dimensional and functional requirements and conformance. Perform other related duties in accordance with production workload requirements as assigned. Detect faulty operations or equipment, discrepancies in material, specifications or other unusual conditions and report to proper Supervisor. Record applicable job information as assigned. Maintain work area in neat and orderly condition. Make out time and production reports. Observe all prescribed safety regulations. Train new hires and cross-train existing personnel as needed. MINIMUM QUALIFICATIONS: Education : Ability to use specifications, schedules, wiring diagrams, and basic arithmetic. Experience : 9-12 months of relevant experience in a manufacturing environment. Initiative & Ingenuity : Ability to independently perform assembly tasks, including transformer lamination and installation of brackets and insulating materials, with judgment to follow standard procedures. Physical Demand : Moderate physical effort, including frequent lifting and moving of materials. Mental/Visual Demand : Continuous attention required for tasks. Responsibility for Equipment : Careful performance needed to avoid minor damage to tools and equipment. Responsibility for Materials : Careful work required to minimize scrap or rework losses. Safety Responsibility : Responsible for ensuring safety to prevent minor injuries. Work Environment : Good working conditions with minimal exposure to shop elements. Wages: Starting at $22.97 per hour, with wage rate progressions at 36 actually worked days, 6, 12, and 18 months of employment. Usual Hours Per Week: Full-time, minimum of 40 hours per week Overtime: Voluntary, for all hours worked over 8 hours in a workday, over 40 hours in a workweek, or for Saturday work (typically 5-hour shifts if, offered). Shift/Workdays: First Shift Only. Monday through Friday. 6:30 AM to 3:00 PM Number of Openings: 1 Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit *************** Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

SNC, An Allient Company, a premier manufacturer and marketer of custom electrical transformers, utility products, and information and communication products are currently seeking an Assembler to join our team in Oshkosh, Wisconsin! The Assembler - Transformer Lamination will perform various assembly operations in their entirety as assigned, primarily concerned with the lamination of electrical transformers and the installation of mounting brackets and insulating materials in accordance with prescribed practices and procedures. Apply now! RESPONSIBILITIES: * Receive direction from Supervisor and instructions relative to work assignment from Supervisor or lead person. Work from established job specifications, departmental card files, prescribed practices and procedures, written and verbal instructions. * Operate specified laminating machine. Set E, I gauge bars and micro-switches to specified height and/or exchange complete drive units. Load left and right magazines with metal lamination, position coil, activate machine to automatically feed alternate laminations to maximum fullness. Complete laminating process by hand, using (2) 1/8" iron or greater and stacks 3" or greater. * Use hoists, low lift hand truck and carts to position or move transformers to assigned locations, use pneumatic tools, ratchets, wrenches and applicable equipment and hand tools. * Install various insulating materials, fasten, mount, tighten, square, gauge brackets and specified hardware to meet dimensional and functional requirements and conformance. * Perform other related duties in accordance with production workload requirements as assigned. * Detect faulty operations or equipment, discrepancies in material, specifications or other unusual conditions and report to proper Supervisor. Record applicable job information as assigned. * Maintain work area in neat and orderly condition. Make out time and production reports. * Observe all prescribed safety regulations. * Train new hires and cross-train existing personnel as needed. MINIMUM QUALIFICATIONS: * Education: Ability to use specifications, schedules, wiring diagrams, and basic arithmetic. * Experience: 9-12 months of relevant experience in a manufacturing environment. * Initiative & Ingenuity: Ability to independently perform assembly tasks, including transformer lamination and installation of brackets and insulating materials, with judgment to follow standard procedures. * Physical Demand: Moderate physical effort, including frequent lifting and moving of materials. * Mental/Visual Demand: Continuous attention required for tasks. * Responsibility for Equipment: Careful performance needed to avoid minor damage to tools and equipment. * Responsibility for Materials: Careful work required to minimize scrap or rework losses. * Safety Responsibility: Responsible for ensuring safety to prevent minor injuries. * Work Environment: Good working conditions with minimal exposure to shop elements. Wages: Starting at $22.97 per hour, with wage rate progressions at 36 actually worked days, 6, 12, and 18 months of employment. Usual Hours Per Week: Full-time, minimum of 40 hours per week Overtime: Voluntary, for all hours worked over 8 hours in a workday, over 40 hours in a workweek, or for Saturday work (typically 5-hour shifts if, offered). Shift/Workdays: First Shift Only. Monday through Friday. 6:30 AM to 3:00 PM Number of Openings: 1 Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit *************** Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. First Shift Only. Monday through Friday. 6:30 AM to 3:00 PM

YOUR DAY TO DAY: As our Assembler IV, you'll perform a variety of electronic, mechanical, or composite assembly tasks in support of our SATCOM Antenna business. You've got demonstrated skills of a fully experienced and versatile assembler with the ability to produce a consistent high production level and high quality of product. Machines & Equipment used: Soldering irons, soldering aids, cutters, skill saws, and applicable hand tools, vacuum equipment, RF induction heating equipment, cold test equipment, spot welding, laser welding and heliair welding equipment, brazing equipment, measuring calipers, voltmeters, electronic multi-meter, heat guns, glue guns, tie wrap guns, crimpers, crimping machines, etc. Composite assemblers will work with pneumatic and hand tools, gel coating and spray painting or spray gun, buffing and sanding equipment YOU WILL BE ACCOUNTABLE FOR: Performs diverse, intricate, high-level electronic, mechanical, or assembly work requiring experience and versatility. Uses all assembly tools with facility. May make own set-up. Comprehensive understanding of assembly sketches, blueprints, and schematics. Performs rework resulting from drawing change notices and initiates as necessary. Ensures quality and personal conformance to specifications using appropriate testing equipment. Employs an overall understanding of assembly techniques, utilizing skills normally in two or more production areas. Trains assemblers with less experience. Exercises leadership skills withing team functions. Assists engineering in supporting documentation and process improvement initiatives. Performs other duties as needed or assigned. YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE: Experienced with related tools or machines, capable of intricate work. Ability to train and lead others and have a high aptitude for quality and conformance to engineering standards. Installing and configuring applications Installed or configured business-critical software or Managed software installation, updates and troubleshooting across Windows and mac OS environments May require completion of the following courses: Overview of Applied Vacuum Technology, Fundamentals of Vacuum Basic HR practices and interviewing techniques, basic leadership Must have the ability to follow safety protocols and practices Ability to work on a team Good eye/hand coordination High School Diploma or GED required, AA degree in technical field preferred Ten (10) years' related assembly experience preferred Able to lift up to 40 lbs. Above average manual dexterity. Able to use microscope for extended periods of time Able to sit/stand for long periods of time Must be a U.S. Citizen SHAPING THE FUTURE THROUGH INNOVATION AND DISCOVERY! With a history spanning more than seven decades, Communications & Power Industries' thousands of products have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, assist in diagnosing medical conditions, empower scientific discoveries and space exploration, and much more. CPI is headquartered in Plano, Texas and is a global manufacturer of electronic components and subsystems. We have manufacturing locations in the United States, Canada, Europe, and Asia. With a heritage of technological excellence, our team serves customers in the communications, defense, medical, industrial, and scientific markets. WHAT WE OFFER: Whether you are a seasoned professional or just embarking on your career, CPI is an ideal place to expand your knowledge and expertise. We cultivate a healthy, dynamic, and team-oriented environment that empowers our employees to develop, create and deliver innovative, reliable technology solutions to power, connect, protect, and support a better tomorrow. We offer our employees an attractive compensation package with competitive salaries and comprehensive benefits, including health and wellness programs, career development, generous retirement savings plan with company match and more! WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI, and we respect each employee as an integral member of our growing team. CPI is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

This position builds electrical components to include wire harnesses, control boxes and control panels according to specifications. Must have the ability to read and comprehend work orders, process sheets and blue prints; produces high quality projects on-time and on-budget to our customers. May be required to serve as backup for other positions as directed. Reviews assembly drawings, diagrams, process sheets, schematics and test requirements and discusses any issues with project engineer Verify bill of material and parts pulled for accuracy and quality Verify dimension for accuracy and quality Documentation of test performance results Process wire Terminate wire ends/splice circuits Assemble harnesses, controls boxes and control panels Test functionality and continuity of electrical assemblies Apply harness covering by machine Knowledge of machines and tools, including their uses and maintenance Good hand-eye coordination Excellent attention to detail Versatile with various tools Watches gauges, dials, or other indicators to make sure a machine is working properly. Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Troubleshooting - Assists in assessing and determining causes of operating errors and deciding what to do about it. Enforces use of safety equipment Is knowledgeable about safety in work area Education and Experience The education requirements and experience requirements listed here indicate the minimum basic educational knowledge and minimum previous work-related experience required by the job duties of the position: High School diploma; experience in electrical assembly in manufacturing desired. Salary Description Sign-on & retention bonuses available!

Responsibilities / Tasks Are you skilled in assembling components, subassemblies, products, or systems? We're looking for dedicated Assembly Team Members to join our dynamic team. We have opportunities for both Light Assemblers and Heavy Assemblers, each with specific responsibilities and requirements. Light Assembler Key Responsibilities: Assembly: Read work orders, follow production drawings, and verbal instructions to assemble components, subassemblies, products, or systems. Positioning: Use jigs, fixtures, or other holding devices to position and align parts in specified relationships. Securing Parts: Crimp, stake, screw, bolt, rivet, weld, solder, cement, press fit, or perform similar operations to secure parts in place. Wiring: Connect component lead wires to printed circuits and route wires between components, connectors, terminals, and contact points. Installation: Install finished assemblies or subassemblies into cases and cabinets. Hardware Attachment: Assemble and attach hardware like caps, clamps, knobs, and switches to assemblies. Intermediate Tasks: Perform tasks such as potting, encapsulating, sanding, cleaning, epoxy bonding, stamping, and color-coding parts and assemblies. Adjustments: Trim materials from components to achieve specified electrical or dimensional characteristics. Testing: Perform online go-no-go testing and inspection to ensure parts and assemblies meet production specifications and standards. Other Duties: Perform other duties as assigned. Your Profile and Qualifications: Education & Experience: High school diploma or GED required; 2 years of experience in the assembly field or in a related area. Vocational training preferred. Technical Skills: Proficiency in MS Office and SAP. Ability to read and comprehend technical documents, blueprints, and schematics. Mechanical Skills: Strong understanding of mechanical systems and manual dexterity for precision work. Physical Demands: Ability to stand for extended periods, occasional over-the-head lifting, frequent walking, and handling objects up to 30 pounds. Heavy Assembler Key Responsibilities: Assembly: Read work orders, production drawings, and follow verbal instructions to assemble components, subassemblies, products, or systems. Positioning: Use jigs, fixtures, or other holding devices to position and align parts in specified relationships. Securing Parts: Crimp, stake, screw, bolt, rivet, weld, solder, cement, press fit, or perform similar operations to secure parts in place. Wiring: Connect component lead wires to printed circuits and route wires between components, connectors, terminals, and contact points. Installation: Install finished assemblies or subassemblies into cases and cabinets. Hardware Attachment: Assemble and attach hardware like caps, clamps, knobs, and switches to assemblies. Intermediate Tasks: Perform tasks such as potting, encapsulating, sanding, cleaning, epoxy bonding, stamping, and color-coding parts and assemblies. Adjustments: Trim materials from components to achieve specified electrical or dimensional characteristics. Testing: Perform online go-no-go testing and inspection to ensure parts and assemblies meet production specifications and standards. Other Duties: Perform other duties as assigned. Your Profile / Qualifications Education: High school diploma or GED required. Experience: Minimum of 1 year of relevant work experience. Technical Skills: Excellent verbal and written communication skills, strong mechanical skills and understanding of mechanical systems, ability to read and comprehend technical documents, blueprints, and schematics. Physical Demands: Physical strength and stamina for lifting heavy parts and prolonged standing or crouching. Ability to lift up to 50 lbs. more than 25% of the time but less than 75% of the time. Working at GEA Group has significant benefits! 12 Paid Holidays PTO - Paid Time Off Medical, Dental, and Vision Insurance Health Savings and Spending Accounts Tuition Reimbursement 401k with excellent employer match Wellness Incentive Program Employee Assistance Program GEA Group is committed to fostering an inclusive work environment where all clients and employees feel welcomed, accepted and valued. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. #Engineeringforthebetter Did we spark your interest? Then please click apply above to access our guided application process.