Service electrician jobs in Oregon

at Freedom Forever Competitive Pay + Benefits + Take Home Vehicle Medical Insurance Dental Insurance Vision Care Insurance 401K Medical Reimbursement Accounts (HSA & FSA) Employee Assistance Program Employee Discounts $50k Life Insurance covered 100% by Freedom Forever Paid Time-Off Must hold a valid Oregon Limited Residential License, Electrical License, or Journeyman Electrician License. This position involves traveling between Portland, OR, and Medford, OR. About the Role: Join Freedom Forever as a Journeyman Electrician - Service, where you'll troubleshoot, maintain, and repair residential solar systems. You'll work independently and as part of a team to ensure top performance and safety across our installed systems. Key Responsibilities: Diagnose and repair PV systems, inverters, and electrical components Perform re-roofs, roof repairs, and drywall work as needed Install and commission solar hardware and monitoring systems Troubleshoot arc faults, isolation faults, and inverter issues Replace faulty optimizers, microinverters, and monitoring equipment Work with electrical panels, subpanels, and conduit Maintain accurate documentation and complete RMAs Travel as needed for service calls Requirements: Valid Oregon Journeyman or LRT (Limited Renewable Energy Technician) License 1+ year of solar experience Strong electrical and roofing skills Familiarity with Enphase, SolarEdge, SunPower, Tesla, LG, etc. Ability to read plans and follow NEC codes Comfortable working at heights and in various weather conditions Valid driver's license and clean driving record Physical Demands: Lift 50+ lbs, climb ladders, kneel, crawl, and work on rooftops Use hand/power tools and safety equipment Stand, walk, and perform repetitive tasks for extended periods Freedom Forever is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: veteran status, uniformed service member status, race, color, religion, sex, sexual orientation, gender identity, age (40 and over), pregnancy (including childbirth, lactation and related medical conditions), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics) or any other consideration protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers. Employees of Freedom Forever must submit to a criminal history check, MVR check and a 9-panel drug screen that includes the following: Amphetamines, Cocaine Metabolites, Opiates, Phencyclidine (PCP), Barbiturates, Benzodiazepines, Methadone, Methaqualone, Propoxyphene.

Looking for a rewarding career? Join the Duraflake team as a Maintenance Electrician! We are seeking a Maintenance Electrician to join our Duraflake wood products mill. This role offers a competitive benefits package with a base hourly rate of $42.82 per hour, with an additional $3.00 per hour shift differential ($45.82) when assigned to the rotating shift schedule, along with profit share and gain share opportunities. This position includes a structured training and development path, with multiple skill levels employees can progress through over time, as they complete training milestones and demonstrate increased technical capability. Benefits & Perks We offer a comprehensive benefits package tailored to meet diverse needs, including: Medical, Dental, Vision, HSA/FSA options 401k with company match Paid Maternity & Paternity Leave, PTO, and holidays Wellness Program, Gym Reimbursement, Pet Insurance Shift differential pay, profit-sharing, and more What We're Looking For: Knowledge: Oregon Electrician's license (LME, PJ, J) or license from a reciprocal state (OR, WA, ID, WY, MN, UT, ME, AR) Experience: AC & DC motor control experience (including drives) required. Electrical troubleshooting experience required. Ability to use standard test and troubleshooting equipment (DMM, VOM, Megger, etc.). Ability to troubleshoot with PLC's (Allen Bradley Control Logix). Strong industrial mechanical millwright experience/skills preferred. Must be willing to perform millwright duties as part of their regular job duties. Familiarity with the basic functions of a CMMS system preferred. Abilities: Working knowledge of Microsoft Office and Outlook Ability to work at heights Proven ability to be a self-motivated and a self-starter Ability to work extended hours and rotating shift as required Physical Requirements: Ability to move freely throughout the facility, including climbing stairs and ladders, and navigating around equipment and machinery Ability to bend, stoop, and crouch as necessary to inspect and maintain equipment Capability to lift and carry materials and equipment weighing up to 50 pounds Ability to perform physical tasks that involve lifting, pushing, pulling, and carrying heavy objects Endurance to stand and walk for extended periods, often in environments with dust, chemicals, high noise levels and varying temperatures Recognition: 2023 Oregon Governor's Occupational Safety & Health Award for Workplace Safety Program. About Us: At ARAUCO, we're more than a global leader in sustainable wood products-we're a team driven by innovation, environmental stewardship, and strong core values. Committed to responsible forestry and quality craftsmanship, we create products that shape industries and protect the planet. Sustainability is central to everything we do-from responsible forestry to reducing environmental impact, we are dedicated to preserving natural resources for future generations. Grow your career with purpose and help us shape a better future-one product, one idea, and one team at a time. ------ Arauco is committed to creating an inclusive culture across the organization. Arauco is an equal opportunity employer to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. Additionally, we demonstrate that commitment by preventing and removing barriers for persons with disabilities. Where it is not possible to remove barriers, Arauco will make efforts to accommodate persons with disabilities in a timely, effective and suitable manner. If you require any accommodations during the recruitment process, please let us know.

Job Description Falcon Services, Inc. is currently hiring for a full-time Apprentice Electrician - Electrical Technician to learn and grow under the mentorship of our Journeyman Electrician in the Portland, OR area. This apprentice position earns a competitive wage of $17.75/hr-$35.50/hr, depending on which period of the program you're currently in. In addition to competitive pay and our team-oriented culture, we offer our Apprentice Electricians - Electrical Technicians the following benefits: Morning coffee AFLAC Paid birthdays Paid holidays after your first year Christmas bonuses and dinners Weekly pay Direct deposit Ongoing training So, now that you've learned the who, what, where, and why, you may be wondering HOW? It's easy! Just fill out our initial mobile-friendly online application. We hope to meet you soon! DAY-TO-DAY This full-time position typically works a Monday through Friday schedule from 8 AM to 5 PM. Occasionally, there are larger or emergent electrical jobs that require you to work overtime. As an Apprentice Electrician - Electrical Technician, you eagerly learn from one of our Journeyman Electricians. Under their direction, you assist with electrical jobs in accordance with current electrical codes. Highly motivated to increase your skill set, you carefully observe and are quick to ask questions. You enjoy taking what you learn and applying it to every job. Through extensive training, you learn everything from implementing safety protocols and codes to interacting with customers. You are excited to be one step closer to becoming a reliable professional while learning from the best in the business! ABOUT FALCON SERVICES, INC. Falcon Services is a locally owned home services company offering a diverse and experienced background in both residential and light commercial contracting. Regardless of scale or budget, we work diligently to ensure that a highly positive customer experience is delivered with each and every project. Embracing our core values of honesty, integrity, trust, and reliability, our professional team plays a vital role in maintaining our extremely positive high-performance reputation in the region. Because they deliver top results for our clients, we proudly offer them competitive pay, fantastic benefits and perks, and a supportive company culture. OUR IDEAL APPRENTICE ELECTRICIAN - ELECTRICAL TECHNICIAN Teachable--You are eager to learn and put new skills into practice. Ambitious--You are motivated to work hard and accomplish goals. Detail-oriented--Even the smallest details do not get overlooked. Professional--No matter the situation, you present yourself and our business in a positive, professional way. Customer service skills--Meeting the customers' needs is what it's all about, and you do it with ease. If this sounds like you, keep reading! REQUIREMENTS FOR AN APPRENTICE ELECTRICIAN - ELECTRICAL TECHNICIAN Enrolled in the final terms (6, 7, and 8) of an accredited apprenticeship program Valid driver's license and a clean driving record Electrical experience preferred If you meet the above requirements, we need you. Apply today to join our team! Location: 97225 Must have the ability to pass a drug test and background check. Job Posted by ApplicantPro

Wages range from $41.36 to $44.93 per hour We train and promote from within Excellent low-cost health benefits Retirement plan with employer-paid contributions Paid vacation and 10 holidays At Sierra Pacific Industries, we understand our greatest strength is the people who choose to build a career with us. We are a fourth-generation family-owned company that has grown to be one of the largest lumber and millwork producers in the United States. Our more than 6,000 employees are proud to work at our state-of-the-art sawmills and other facilities, including: manufacturing, custom wood-framed windows, fabrication, millwork, veneer, cogeneration, trucking, forestry, and other operations. Currently, we are seeking a qualified Electrician to perform building and maintenance electrical work at our sawmill in Eugene, Oregon. About the Position * Install, maintain, and repair electrical systems and equipment in manufacturing facility * Maintain all components required to control machinery, including switches, sensors, programmable logic controllers, variable frequency drives, and operate interface units * Recognize and effectively identify hazards and correct electrical defects * Perform preventative maintenance on all electrical systems and equipment * Inspect and maintain motors, switches, junction boxes, switch panels, circuit breakers, transformers, fuse panels, and lighting * Read and interpret blueprints, schematics, and electrical specifications to determine layout of industrial electrical installations * Install electrical conduit and pull wire * Maintain efficiency and safety of all plant electrical circuits, assembles, and equipment * Troubleshoot and install encoders, linear transducers, vision systems, and other advanced sensors * Identify and help implement process improvements to optimize performance and production * Effectively troubleshoot issues for best resolution while staying calm in stressful situations * Communicate effectively, comprehend, and follow complicated verbal and written instructions * Perform general maintenance in a safe and efficient manner and maintain a clean work area * Work may consist of overtime during busy production times Qualifications * 2 years' recent verifiable related work history or equivalent education * Licensed through the state of Oregon to perform electrical work * Understanding of industrial electrical safety, MCCs, three-phase power, running conduit, lighting, electrical, and hydraulic systems required * Familiarity with programmable logic controllers and their programming, preferable * Read and understand blueprints and circuit diagrams Why Join Our Team? Because this is more than an invitation, it's a commitment to offer opportunities for personal and professional growth to everyone! We ask people to grow with us and make the company even better. We provide an excellent benefit package including a full Health Benefits Plan (including medical, dental, and vision) with low-cost premiums, a 401(k) with Company Match, additional Retirement Contributions, and company-paid Life Insurance. How to Apply If you are qualified and would like to join our team, please apply in person Monday through Friday from 8am to 4pm. Let's talk! Sierra Pacific Industries 90201 Hwy 99 N Eugene, OR 97402 ************** or apply online and view all our career opportunities at: spi.careers Celebrate our 300th million seedling planted with us! spi-ind.com/OurForests/ThreeHundredMillion Sierra Pacific is an (EOE) Equal Opportunity Employer, including those with a disability and veterans. About Our Company Sierra Pacific Industries is a fourth-generation family-owned company based in Northern California that started in 1949 and has grown to be one of the largest lumber and millwork producers in the U.S., employing around 6,500 crew members. Sierra Pacific continues to be a company where its employees are proud to work at state-of-the-art facilities and others strive to become part of the team. We own and sustainably manage more than 2.4 million acres of timberland in California, Oregon, and Washington. Our forests are sustainably managed under a 100-year plan by Registered Professional Foresters, Wildlife Biologists, Botanists, and other professionals. We are growing forests for our future, planting over 6 million new trees every year. In Spring 2024, we planted our 300 millionth seedling on our timberlands. This milestone was decades in the making, reflecting our commitment to sustainable forest management and ensuring we have forests not just for today, but for generations to come. Sierra Pacific effectively uses nearly 100% of every piece of wood we bring to our facilities. In fact, any small amount that isn't turned into hand-crafted doors and windows, millwork, lumber, or landscaping material is actually converted into electricity in our eight biomass-fueled power plants. We are proud that all Sierra Pacific facilities follow our drug-free and tobacco-free policies. As part of our safety in the workplace policy, an offer of employment is subject to a negative drug screen result. We use E-verify to verify the social security number and work authorization of all newly hired employees. Sierra Pacific is an (EOE) Equal Opportunity Employer, including those with a disability and veterans. At Sierra Pacific Industries, we understand our greatest strength is the people who choose to build a career with us. What does it mean to be part of the Sierra Pacific family? It means you are a valued team member and part of a growing, fourth-generation family-owned, forest products company built on hard work, innovation, and wise investments. With around 6,500 crew members in over 30 states, Sierra Pacific offers many opportunities for personal and professional growth; from entry-level to skilled trades, from truck drivers to sales managers, from foresters to engineers - for everyone! We invite you to learn more about our history, our 2.4 million acres of forestlands, and our state-of-the-art wood product and window manufacturing facilities at ************************ As part of our safety in the workplace policy, an offer of employment is subject to a negative drug screen result. We are also proud that all Sierra Pacific facilities follow our tobacco-free policy. Sierra Pacific adheres to E-verify to verify the social security number of all newly hired employees. Sierra Pacific is an (EOE) Equal Opportunity Employer, including those with a disability and veterans. If you are an individual with a disability and need accommodation to complete the application process, please call ************ or write to Sierra Pacific Industries at PO Box 496011, Redding, CA 96049.

Pacific Coast Producers, a growing agricultural cooperative with food production facilities across the West Coast, is seeking a talented and experienced Journeyman Electrician to join our team at our Production Facility in The Dalles, OR . PCP is investing in its people and advancing a culture of service, where each employee can do their best to make affordable, high-quality food for customers across North America. . Pay Rate : $47.70 per hour. Full time/ 40 hours per week with some weekend and overtime hours required when needed. This position is part of a seniority based Collective Bargaining Unit (CBA) and requires work on various shifts. Join our legacy of talented people working together to provide the highest level of customer service. PCP employees receive terrific benefit plans such as affordable medical, dental, and vision insurance. Retirement savings plans, including a defined-benefit pension plan is also provided to eligible employees. Primary job duties would include: Perform maintenance, wiring, installation of motors, switches, panels, circuit breakers, lighting, testing and power circuits. Install, connect, adjust and calibrate electrical gauges and recording instruments. Plan layout and installation of wiring, equipment, or fixtures based on specs and codes. Use a variety of tools or equipment, such as power construction equipment, measuring devices and testing equipment, such as oscilloscopes, multi-meters, or test lamps. Possess demonstrable skills for specifying and properly sizing of wire, conduit, circuit breakers and fuses per NEC and other applicable codes. Read and understand blueprints and schematic diagrams. Diagnose malfunctioning systems, apparatus, or components. Able to understand and utilize PLC programs to aid in troubleshooting. Perform other duties as assigned. Job Requirements: Completed a related educational degree, certificate, or program; and/or comparable work experience, plus formal training in this area Oregon Journeyman Electrician License. A fundamental aptitude, which may be assessed by a practical exam. Experience in food production and manufacturing environment Able to understand and utilize PLC programs to aid in troubleshooting. AutoCAD experience for creating electrical drawings. Demonstrate ability to communicate effectively. Reliable and able to maintain excellent attendance. Self-motivated, able to work independently, and possess strong problem-solving skills. Sponsorship : This role is not eligible for current or future visa sponsorship. About PCP Summary Established in 1971, Pacific Coast Producers is a cooperative owned by over 165 family farmers that grow and deliver various produce, including tomatoes, peaches, pears, grapes, cherries, and more, to production facilities in California and Oregon for processing and packaging. With over 3,000 dedicated employees, PCP strives to produce the finest quality products for customers across all channels of trade, including grocery retailers and foodservice distributors throughout the United States and Canada. AA/EEO Policy Statement Pacific Coast Producers is an affirmative action and equal opportunity employer. No employee or applicant will be discriminated against in any condition of employment because of race, color, national origin, sex, religion, age, disability, veteran status, or any other status protected by law.

How you will contribute You will: Diagnose and repair production equipment in an industrial manufacturing environment Repair, maintain, and upgrade electrical equipment Read and understand wiring schematics Perform PLC troubleshooting and programming Experience using test equipment to troubleshoot electrical issues (Multimeter, Megger, thermography, etc.) Knowledge of industrial 3 phase equipment, controls, VFD drives, PLC and control devices (e.g. Allen Bradley, ABB, and Foxboro) Must be able to troubleshoot and repair up to 480V equipment Perform calibration of 4-20 MA instruments and other low voltage systems. Ensures conformance with all Safety, GMPs, health code regulations, NEC, NFPA standards and Food Safety Policies What you will bring A desire to drive your future and accelerate your career. You will bring experience and knowledge in: Operating machines with coaching Safety and quality standards for operating machines Reading and writing, and fluently conversant in the language of communication as appropriate to the site Collaborating well in a diverse work environment Additional Required Oregon Electricians License High School Diploma or general education degree (GED) Preferred at least 2 years manufacturing experience Ability to work any shift (1st, 2nd, 3rd), weekends, and holidays as required Ability to work well in a team-based environment with limited supervision Ability to problem solve and help with practical solutions Able to learn and apply Continuous Improvement tools (TPM & Lean Manufacturing) Experience with high speed packaging lines and production equipment in food processing, chemical, or pharmaceutical industries Preferred Familiar with SAP Benefits These are some of the great benefits that you will be entitled to: Health, Group life insurance and Saving plan. Thirteen paid Holidays per year. Increasing paid time off. Increasing hourly wage during the first 12 months of contract. Monday Friday schedule Weekends wage differential, Saturday (1.5 x) Sunday (2 x) 2nd Shift Differential $0.75/hr, 3rd Shift Differential $1.50/h $5000 sign on Bonus License rate: Maintenance Electrician $46.05/HR Lead Electrician $47.37/HR Additional Job Description Required Oregon Electricians License High School Diploma or general education degree (GED) Preferred at least 2 years manufacturing experience Ability to work any shift (1st, 2nd, 3rd), weekends, and holidays as required Ability to work well in a team-based environment with limited supervision Ability to problem solve and help with practical solutions Able to learn and apply Continuous Improvement tools (TPM & Lean Manufacturing) Experience with high speed packaging lines and production equipment in food processing, chemical, or pharmaceutical industries Preferred Familiar with SAP Benefits These are some of the great benefits that you will be entitled to: Health, Group life insurance and Saving plan. Thirteen paid Holidays per year. Increasing paid time off. Increasing hourly wage during the first 12 months of contract. Monday Friday schedule Weekends wage differential, Saturday (1.5 x) Sunday (2 x) 2nd Shift Differential $0.75/hr, 3rd Shift Differential $1.50/h $5000 sign on Bonus License rate: Maintenance Electrician $46.05/HR Lead Electrician $47.37/HR Attachments Security Clearance Required: NoVisa Candidate Considered: NoCOMPENSATION Base Salary - USD $90,000 to $100,000*** Never repost ***Full-time Benefits - FullRelocation Assistance Available - NoCommission Compensation - NoBonus Eligible - YesOvertime Eligible - YesInterview Travel Reimbursed - NoCANDIDATE DETAILS2+ to 5 years experience Seniority Level - AssociateManagement Experience Required - NoMinimum Education - High School Diploma or EquivalentWillingness to Travel - NeverSCREENING QUESTIONS Do you have a valid Maintenance Electrician License?

Title: Maintenance Electrician Industry: Food Manufacturing Pay Range: $46.05-$47.37 ( $5000 sign on Bonus) Openings: 4 You independently operate and maintain at least one process, equipment or systems following autonomous maintenance (AM) standards and use your technical skills to improve line and/or system performance to meet business needs. How you will contribute You will: Diagnose and repair production equipment in an industrial manufacturing environment Repair, maintain, and upgrade electrical equipment Read and understand wiring schematics Perform PLC troubleshooting and programming Experience using test equipment to troubleshoot electrical issues (Multimeter, Megger, thermography, etc.) Knowledge of industrial 3 phase equipment, controls, VFD drives, PLC and control devices (e.g. Allen Bradley, ABB, and Foxboro) Must be able to troubleshoot and repair up to 480V equipment Perform calibration of 4-20 MA instruments and other low voltage systems. Ensures conformance with all Safety, GMPs, health code regulations, NEC, NFPA standards and Food Safety Policies What you will bring A desire to drive your future and accelerate your career. You will bring experience and knowledge in: Operating machines with coaching Safety and quality standards for operating machines Reading and writing, and fluently conversant in the language of communication as appropriate to the site Collaborating well in a diverse work environment Additional Job Description Required Oregon Electricians License High School Diploma or general education degree (GED) Preferred at least 2 years manufacturing experience Ability to work any shift (1st, 2nd, 3rd), weekends, and holidays as required Ability to work well in a team-based environment with limited supervision Ability to problem solve and help with practical solutions Able to learn and apply Continuous Improvement tools (TPM & Lean Manufacturing) Experience with high speed packaging lines and production equipment in food processing, chemical, or pharmaceutical industries Preferred Familiar with SAP Benefits These are some of the great benefits that you will be entitled to: Health, Group life insurance and Saving plan. Thirteen paid Holidays per year. Increasing paid time off. Increasing hourly wage during the first 12 months of contract. Monday Friday schedule Weekends wage differential, Saturday (1.5 x) Sunday (2 x) 2nd Shift Differential $0.75/hr, 3rd Shift Differential $1.50/h $5000 sign on Bonus License rate: Maintenance Electrician $46.05/HR Lead Electrician $47.37/HR

Job Title: Journey Industrial Electrician Pay: Starting pay $37.22/hr - up to $44.82/hr with client specific training BONUS: Up to $3,000 signing bonus - Hours: Multiple shifts available at this time As a Journey Industrial Electrician, you will be responsible for: Performs highly skilled electrical maintenance tasks including equipment installation Repair and PM electrical machinery; this may include, but not limited to, such equipment as AC/DC motors, drives, pneumatic, hydraulic, conveyors and packaging systems and instrumentation and PLC controls In downtime situations, must be able to analyze cause of breakdown with equipment Must also determine and complete maintenance repairs required to return the equipment to effective operating conditions Follow and adhere to safety lockout procedures and strictly adhere to plant safety rules as well as follow excellent housekeeping practices to help maintain a clean work environment Must be able to work independently as well as in a group Performs other related duties as assigned Models company core values The ideal candidate for this role will have: High school diploma or GED Stable employment history with a minimum of four (4) years of experience in Industrial Maintenance work AND/OR equivalent education to include vocational/technical school certificate/diploma Willing and able to work overtime, weekends, on-call and rotating shifts and holidays Proficient in the use of hand and power tools Experience with reading electrical drawings and schematics Troubleshooting experience, including the use of necessary test instruments such as digital multi-meter, oscilloscope, megger, etc. Experience using a computer for record keeping and documentation Able to work in extreme heat/cold, navigate catwalks and ladders physical ability to perform the essential physical functions of the position, which includes climbing stairs, lifting up to 50 pounds, stooping and bending Ability to communicate effectively and constructively Comprehension of complex work instructions and documentation Ability to work with mathematical concepts in an industrial environment Team oriented Willing and able to learn new jobs and skills A personal and total commitment to observe all safety rules and regulations including NEC and NFPA70E (including LOTO and Arc Flash) Knowledge of DC motors and motor controls Knowledge of AC motors and motor controls Knowledge of DC, VFD, and servo drives Knowledge of single phase and 3-phase power distribution systems Knowledge of various process instrumentation, including pressure, flow, temperature, level, weight, etc Knowledge of PLC controls, HMI operator interfaces, and control systems networking Working knowledge of basic industrial mechanical issues Knowledge of a CMMS Knowledge of Precision Maintenance techniques, mechanical and / or electrical and instrumentation Preferred Skills/Abilities: Experience with CMMS Knowledge of fire alarm and protection systems Experienced in pneumatic, hydraulic, and conveyor systems Excellent skills in root cause analysis Previous experience in Rockwell Software RSLogix5000 and FactoryTalk View Studio (Editor, Me, and SE), AB PowerFlex VFD's and Kinetics Servos, and Ethernet IP networks using AB Stratix switches Benefits: Medical, dental and vision is covered by Roseburg at 100% for the team member, their spouse, and any dependents under the age of 26. 401k matching is $.50 on the dollar up to 6%. EAP programs available that include 8 free sessions with mental health professionals. Ready to take the next step? Apply now for this Journey Industrial Electrician role needed in Roseburg, OR - or contact us to learn more! #STRB

Job Description PPS is seeking an experienced Maintenance Electrician for our aluminum extrusion and finishing facility near Eugene. The Maintenance Electrician will be tasked with troubleshooting, repair, installation, and preventative maintenance for all equipment and structures in the facility. This is a Direct Hire role with a highly competitive pay rate with shift differential and fantastic benefits! Responsibilities: Troubleshoot and repair machinery quickly and efficiently when issues happen during production Complete projects during production (ex: fabrication, rebuilding parts, wiring panels and inspecting machinery) Perform preventative maintenance and repairs while machinery is down Maintain working electrical knowledge of presses and machinery Log maintenance work Adhere to safety standards and wear proper personal protective equipment Maintain a clean and safe work environment Work independently and as a team Other maintenance duties as assigned Overtime may be required and will vary based on production schedule and projects Requirements: Current LME license or Plant Journeyman license required. Experience with and understanding of hydraulic and pneumatic valves and troubleshooting, pumps, cylinders and schematics required. Experience with Allen Bradley PLCs, Variable frequency drives, 3 phase 480vac equipment, motor controls and sensors preferred. Experience with general industrial equipment such as chain, bushings, bearings, gearboxes and drive belts preferred. Experience with fabrication and reading blueprints preferred. Lock out/tag out experience preferred. Operate forklift and man lift preferred. Experience with plumbing of air, oil, grease and water lines preferred. High School Diploma or GED 1+ years experience Subject to drug screen and criminal background check

Madden Industrial Craftsmen is looking to fill a Direct Hire LME position with a unionized company located in Portland, OR. The person in this position will be in charge of troubleshooting, diagnosing, repairing, adjusting and installing as well as comfortable with hydraulic and pneumatic systems. You will need to have a solid background in electrical work! Friendly reminder : This is a Graveyard shift position. If you enjoy getting up with the sun, this position is NOT for you. We respect that about you -- please respect us too and do not apply for a graveyard shift position. We feel that sounds fair. If you WANT a graveyard shift position, APPLY today! We'd love to schedule a conversation. Responsibilities: * Able to replace, repair, and adjust to manufacturer specifications: * Bearings, seals * v-belts, chains * Air valves, hydraulic valves * Pumps, couplings * Process rolls (Corrugating, pressure, glue, etc.) * All machinery parts * Troubleshoot and repair mobile equipment * Perform all jobs safely and properly. * Carry out preventive maintenance tasks. * Operate and maintain a high pressure boiler, 200 PSI, and 150 HP. * Maintain and repair mechanical fixed equipment as well as mobile equipment (forklifts). * Fabricate, repair, and install equipment. * Maintain and repair building. * Communicate with supervisor and production team on maintenance issues. * Be able and willing to accept responsibility for maintaining the plant on a shift working independently, and without other help. * Able to manage paper work for work orders, PM's, and stores inventories as required. * Other duties as specified by supervisor. Qualifications: * Welding * Arc (Mig & Stick) * Gas Cutting * Preventive maintenance * Oil Viscosity's * Difference and usage of greases * Application and proper amount of lubricant * Inspection for worn, broken, out-of-line and missing parts * Read and understand machine manuals, and troubleshooting manuals * Parts identification * Operating shop machines/tools * Grinders * Drill Press * Precision tools: micrometers, calipers, feeler gauges, dial indicators, etc * Current LME or Electricians License / Oregon Schedule : * Monday- Friday * 11:00pm-7:00am Pay: * $70,000 to $79,000/year DOE (shift differential will also apply) Benefits: * 401(k) * Medical * Dental * Vision * PTO

PPS is seeking an experienced Maintenance Electrician for our aluminum extrusion and finishing facility near Eugene. The Maintenance Electrician will be tasked with troubleshooting, repair, installation, and preventative maintenance for all equipment and structures in the facility. This is a Direct Hire role with a highly competitive pay rate with shift differential and fantastic benefits! Responsibilities: Troubleshoot and repair machinery quickly and efficiently when issues happen during production Complete projects during production (ex: fabrication, rebuilding parts, wiring panels and inspecting machinery) Perform preventative maintenance and repairs while machinery is down Maintain working electrical knowledge of presses and machinery Log maintenance work Adhere to safety standards and wear proper personal protective equipment Maintain a clean and safe work environment Work independently and as a team Other maintenance duties as assigned Overtime may be required and will vary based on production schedule and projects Requirements: Current LME license or Plant Journeyman license required. Experience with and understanding of hydraulic and pneumatic valves and troubleshooting, pumps, cylinders and schematics required. Experience with Allen Bradley PLCs, Variable frequency drives, 3 phase 480vac equipment, motor controls and sensors preferred. Experience with general industrial equipment such as chain, bushings, bearings, gearboxes and drive belts preferred. Experience with fabrication and reading blueprints preferred. Lock out/tag out experience preferred. Operate forklift and man lift preferred. Experience with plumbing of air, oil, grease and water lines preferred. High School Diploma or GED 1+ years experience Subject to drug screen and criminal background check

We are seeking skilled Electricians (LME, PJ, J) to join our operations team in Albany, OR. This role involves rotating shifts, including days, nights, and weekends, with a flexible schedule based on business needs. Expect a dynamic work environment with a variety of daily tasks. Key Responsibilities: Troubleshoot, maintain, test, and repair electrical and mechanical systems. Work on equipment such as PLCs, AC/DC motors, transformers, circuit breakers, control panels, lighting, power distribution systems, and more. Collaborate across departments to ensure maintenance and repairs are completed efficiently, supporting production goals and operational success. What We're Looking For: Qualifications & Skills: High School Diploma or GED. Oregon Electrician's License (LME, PJ, J). AC & DC motor control experience (including drives) required. Strong electrical troubleshooting skills. Experience using standard test and troubleshooting equipment (DMM, VOM, Megger, etc.). Ability to troubleshoot PLCs (Allen Bradley Control Logix). Industrial mechanical millwright experience preferred; must be willing to perform millwright duties as needed. Familiarity with CMMS systems is a plus. Working knowledge of Microsoft Office and Outlook. Ability to work at heights and in physically demanding environments. Self-motivated with a strong work ethic. Willingness to work extended hours and rotating shifts as required. Physical Requirements: Ability to navigate the facility, including climbing stairs and ladders and working around equipment and machinery. Ability to bend, stoop, and crouch as needed for inspections and maintenance. Capability to lift and carry up to 50 pounds. Endurance to stand and walk for extended periods in environments with dust, chemicals, high noise levels, and varying temperatures. Benefits & Perks: We offer a comprehensive benefits package, including: Medical, Dental, Vision, HSA/FSA options 401k with company match Paid Maternity Leave, PTO, and Holidays Wellness Program, Gym Reimbursement, and Pet Insurance Shift differential pay, profit-sharing, and more This is an excellent opportunity to join a team that values safety, collaboration, and professional growth. EEOC

Journeyman Electrician Pay Rate: $42.87/hr Category/Shift: Hourly Full-Time (Night Shift) Physical Location: 4060 Fairview Industrial Dr. SE Salem, OR 97302 Important Information * Night Shift * 8, 10 and 12 hour shifts * Working conditions - industrial / indoors and outdoors The Job You Will Perform: * Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools. * Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety of system. * Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and local codes. * Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes. * Repair or replace wiring, equipment, and fixtures, using hand tools and power tools. * Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem. Job Conditions * Physical hazards such as noise, fumes, and dirt are present due to the equipment and machinery. Safety shoes, hearing protection, Safety Glasses and face shields must be worn to eliminate the risks associated with these hazards. Travel is not required for this position. * Handling multiple issues regarding safety and maintenance increases pressure. Work load may be unpredictable and pressure can be substantial during peak times. Critical deadlines require considerable adaptability. Disturbances of work flow and/or irregularities in work schedule are expected and occur on an intermittent basis. Extra hours may be required, sometimes on weekends, weekdays, and holidays. Physical Activities Required to Perform Essential Functions * Ability to: lift and carry up to 50 pounds occasionally; crouch or bend at the knees occasionally to increase visibility; climb up to 60 vertical steps occasionally; stoop or bend at the waist occasionally to increase visibility; reach at arm's length frequently or overhead occasionally; twist and turn at the neck and trunk; walk frequently on uneven ground; handle and grasp tools and parts continually; communicate by speech and hearing continually. Visual acuity needed for close detail work. Mental dexterity needed as Electrician will work independently while demonstrating attention to detail and continuous awareness. The Skills You Will Bring: * High School diploma or GED Certification required. * Minimum of 3 to 5 years of experience in Industrial Maintenance required. * Must possess knowledge of electrical schematics, charging systems, stationary and mobile equipment. * Candidates must be able to maintain current electrician's license or identification card to meet governmental or state regulations. The Benefits You Will Enjoy: International Paper offers a benefits package that includes health, welfare and retirement plans including Medical, Dental, Life insurance, Flexible Spending Accounts, Short-term Disability, 401(k) and/or Pension (where applicable), Paid Time Off, Education & Development (including Tuition Reimbursement), and Voluntary Benefits including insurance for home, auto, vision and pets. The Career You Will Build: * Promotional opportunities The Impact You Will Make: We continue to build a better future for people, the planet, and our company! IP has been a good steward of sustainable practices across communities around the world for more than 125 years. Join our team and you'll see why our team members say they're Proud to be IP. The Culture You Will Experience: International Paper promotes employee well-being by providing safe, caring and inclusive workplaces. We have team members all around the world with diverse backgrounds, experiences, and perspectives. These are our strengths. We are committed to creating a culture where all individuals are respected, valued, engaged and have an opportunity to do their best work every day. We invite you to bring your uniqueness, creativity, talents, experiences, and safety mindset to be a part of our increasingly inclusive and diverse culture. The Company You Will Join: International Paper (NYSE: IP) is a global producer of sustainable packaging, pulp and other fiber-based products, and one of the world's largest recyclers. Headquartered in Memphis, Tenn., we employ approximately 39,000 colleagues globally who are committed to creating what's next. We serve customers worldwide, with manufacturing operations in North America, Latin America, North Africa and Europe. Net sales for 2023 were $18.9 billion. Additional information can be found by visiting internationalpaper.com. International Paper is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. International Paper complies with federal and state disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact reasonable.accommodations@ipaper.com or **************. Share this job: Location: Salem, OR, US, 97302 Category: Hourly Job Date: Dec 13, 2025 If you are not finding suitable opportunities, please click below to join our talent community! Join Our Community Nearest Major Market: Salem

Meet the team that brings our projects to life. From logistics to electrical work, everyone in the field plays a critical role in building, powering, and delivering success on a jobsite. Our logistics professionals keep construction moving by ensuring a steady flow of inventory. They bring attention to detail and strong organizational skills as they procure tools and materials for our electricians. Apprentice electricians are the powerhouses behind our most dynamic projects, while summer interns and new graduates kick off their careers as industrial electrical professionals. These team members work closely with our journeyman electricians-seasoned experts who lead and mentor crews while completing complex projects. Our journeyman electricians partner with field foremen and site superintendents, who coordinate work, manage risks, and keep projects on track through planning, motivation, and communication. Our I&E, service, and maintenance teams ensure project performance by installing, testing, troubleshooting, and calibrating equipment. Across roles, we all champion safety-empowering employees to lead as safety shareholders, uphold zero-injury expectations, and care for our crews, company, and families. Apprentice Electrician Responsibilities * Measure, cut, and bend conduit using a tape measure and appropriate power/hand tools * Operate power tools such as drills, saws, pullers, tuggers, etc. * Install conductors in race way and cable tray using manual and power equipment * Assist in lifting, positioning, and fastening objects, such as wiring, conduit, and motors * Perform minor repairs, such as replacing fuses, light sockets, bulbs, and switches * Disassemble defective electrical equipment, such as motors, using appropriate power/hand tools * Load, transport, unload, and furnish Journeyman and Foreman Electricians with materials, equipment, tools, and supplies * Use ladders, scaffolding, scissor and boom lifts * Perform housekeeping duties, as required * Other duties as assigned by field leaders Qualifications Education & Experience: Candidates with a certificate or AS degree in electrical technology, electrical construction, instrumentation or similar or equivalent experience preferred. A minimum of 2 years of electrical experience required. Location/Travel: This position will require travel in/around Hermiston, OR - up to/within a 200-mile radius. Applicants must be permanently located in/around the office location or be willing to permanently relocate. Applicants must have reliable transportation and a valid driver's license. Per diem and mileage stipends applicable per company policy. Work Schedule: Start times, break times and work hours vary per site and stage of our projects. Our employees work more than 40 hours per week but no more than 60, as part of our commitment to safety. Due to the type of construction, weekend work maybe required on occasion. Work Environment: While performing the duties of this job, this role is often exposed to high/precarious places, risk of electrical shock, and all outside weather conditions. This role is expected to climb and work at heights and in confined spaces. The noise level in the work environment is usually moderate. Due to the nature of our work and our client base, this role may involve tasks in an environment exposed to dust. Candidates should be comfortable working in these conditions and complying with safety standards to protect their well-being. Benefits of Working at Interstates: * 401(k) Retirement Plan + Company Match * Health, Dental, and Vision Insurance Benefits (Short & Long-Term Disability, Group Life Insurance, and more) * Company Discount Perk Program (Access to discounts with renown brands across the country) * Paid Time Off & Holiday Pay, Flexible Schedule (Support work/life balance) * Bonus Incentives (End of Fiscal Year Incentives and Merit Increases) * Per Diem/Travel Pay or FAVR Program Benefits (as applicable) * Family & safety culture - a team that cares about you as a whole person, not just what you do at work * Company Sponsored Holiday Events, Team Celebrations, and Community Outreach Volunteer Time * Advancement Opportunities unique to our employee's long-term goals * Company Issued Cordless Milwaukee Tool Kit * Continuing Education & Journeyman Licensing Renewal Assistance * Double Pay for Sunday Work, Triple Pay if working an occasional holiday

Are you a licensed electrician looking for challenges and exciting opportunities that go beyond just pulling romex and trimming out light switches? Have you grown tired of your firm's treating you like just another journeyman? Will you spend the next 10-20 years wishing you did more? Welcome to Techifi - Innovating the Future Together At Techifi, we're more than just a company - we're a team of visionaries, creators, and innovators dedicated to transforming ideas into cutting-edge solutions. Our mission is to empower businesses and individuals through technology, creating smarter, more connected, and more efficient solutions that drive success. Founded on the principles of collaboration and creativity, Techifi thrives on solving complex challenges with bold, forward-thinking strategies. From streamlining business operations to delivering immersive digital experiences, we're committed to excellence in everything we do. Why join Techifi? Here, you'll find a culture that values growth, inclusivity, and innovation. We believe in investing in our people, fostering a supportive environment where your ideas and talents can shine. Together, we're shaping the future - one breakthrough at a time. We pride ourselves on delivering innovative low-voltage solutions that transform connectivity, security, and communication for our clients. Join Techifi as a Lead Low Voltage Technician If you are an experienced electrical professional with strong leadership skills and a passion for delivering top-notch solutions, and want to transition into or further your low-voltage/home automation interests, Techifi is seeking a motivated and skilled Lead Low Voltage Technician to take charge of our projects and mentor a team of talented technicians. In this role, you'll oversee the installation, maintenance, and troubleshooting of advanced low-voltage systems while ensuring quality and efficiency every step of the way. As a Lead Low Voltage Technician, you'll be a key player in driving the success of our projects, leading by example, and fostering a collaborative, high-performance culture. If you're ready to elevate your career and make a meaningful impact in a dynamic environment, we'd love to hear from you! Position Overview The Lead Low-Voltage Technician is responsible for the installation, configuration, and maintenance of structured cabling, custom-integrated audio/video systems, lighting controls, motorized shading, security systems, and home automation technologies. This role combines technical expertise with team leadership, ensuring projects are completed efficiently, on time, and to the highest standards of quality. The Lead Technician works closely with project managers/coordniators, clients, and other trades to deliver exceptional results in the field. Essential Duties and Responsibilities System Installation Lead the installation of low-voltage systems, from rough-in, through trim, into final installation. Ensure all phases of work meet design specifications, industry standards, and project timelines. Technical Leadership Serve as the primary on-site contact for project progress, technical issues, and quality assurance. Provide leadership, guidance, and training to Field Technicians to ensure team success. Troubleshoot, diagnose, and resolve technical issues during the installation and testing phases. Project Collaboration Cooperate with the Project Manager/Coordinator and other stakeholders to plan work schedules, material delivery, and project milestones. Communicate project updates, challenges, and requirements to the Project Manager/Coordinator. Assist with equipment programming, testing, and commissioning to ensure full system functionality. Documentation and Reporting Maintain accurate documentation of installation work, wiring diagrams, and system configurations. Submit daily field reports, including job progress, equipment needs, and team performance. Identify and document change order requests as required. Client Interaction Serve as a professional and knowledgeable point of contact for clients/stakeholders on-site. Address client concerns and ensure a positive customer experience. Skills and Qualifications Minimum 5 years of experience in high- or low-voltage system installation, including structured cabling, audio/video, security, lighting, and home automation. Proven leadership abilities with experience supervising field teams and coordinating on-site work. Proficiency in reading and interpreting blueprints, wiring diagrams, and system schematics. Strong knowledge of electrical codes, standards, and best practices for residential and light commercial installations. Excellent troubleshooting and problem-solving skills. Ability to work with basic apps/software, test equipment, and hand/power tools. Strong verbal and written communication skills for collaborating with team members, clients, and other trades. Must be licensed in the state of Oregon (LE-A) and/or Washington (O-6), and the motivation/ability to procure reciprocal licensing as needed. Physical Requirements Ability to stand, bend, kneel, climb ladders, and lift/carry up to 50 lbs. Comfortable working on construction sites, in tight spaces, and on elevated surfaces. Travel Occasional travel may be required for on-site projects and training, typically within 1-2 hours of the Portland Metro area. Benefits and Growth Opportunities for on-the-job training, continued education, and advanced certifications. Career growth potential. Company-provided tools, technology, and equipment. Company fleet vehicle. Company mobile phone. Health, dental, and vision insurance. Paid time off. Paid holidays. Summary Applicants must have clean current Driver's License and be insurable, as the need to commute to jobsites in a company-owned vehicle is required. Applicants must have their Journeyman/Journeywoman Electrician license, a solid understanding of electrical principles and codes, and strong troubleshooting skills with the ability to diagnose electrical issues effectively. Experience in/understanding of frame carpentry and overall residential mechnical rough-in is a plus. This job description is not intended to be all-inclusive. The employee may be required to perform other related duties as requested to meet the ongoing needs of the organization.

Overview An Evergreen Requisition is an advertisement for positions that CoolSys continuously hires throughout the year. It is a way for CoolSys to build a database of qualified, interested applicants for a particular job so that when there is a need to fill that type of role, the hiring process will be faster. By applying to an Evergreen Requisition, you are expressing your interest in that job. If there is an interest in your application, a recruiter will reach out to you. WHY COOLSYS? At CoolSys, we offer more than just a job-we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America's Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: Competitive Compensation: $45. 00- $70. 00 hr. Sign on Bonus: Up to $7,500. 00 DOE Ongoing Education & Training: Access to state-of-the-art facilities and paid online training. Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match. Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing. Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more. Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities This position is responsible for repairing, maintaining, and installing different kinds of electrical systems. Determines the layouts and testing of electrical patterns. Reads blueprints, runs conduit, and wires devices. Read and interpret mechanical and electrical drawings and code specifications for determining wiring layouts. Performs upgrades or preventive maintenance to electrical control systems. Runs tests, isolates problems, replaces damaged sections of wiring, and layout circuits. Other duties as assigned. Qualifications A High School Diploma is required; prefer some trade or technical school classes. 3+ years' work experience as an electrician apprentice. Electrician apprenticeship. License as a Journeyman or Electrician to meet state requirements. Knowledge of tools, equipment, and materials common to the electrical trade. Knowledge of applicable electrical codes, standards, and regulations. Knowledge of electrical applications for high and low-voltage electric systems. Skill in the installation, repair, and maintenance of all types of electrical system equipment and components. Ability to work with minimal supervision. Must be knowledgeable in all aspects of commercial construction industry-related products and tools. Skill in both verbal and written communication. Join Us Today, there are 26 different companies that make up the CoolSys family of brands. Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and Twitter. Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance. Journeyman, Service Tech, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, installer, installation, mechanical, mechanic, AC, field service, chiller, specialist, HVACR, Electrical, pipefitter

The Supervisor of the Electrical department is responsible for onsite and field repair and service, installations and returns for the facility. The Supervisor of Electrical is responsible for driving Market delivery and installation margins by maximizing internal resources, identifying any constraints, and achieving key performance metrics such as customer satisfaction, on-time delivery, service, and safety of onsite and offsite personnel. Success will be accomplished through value driven execution that fully complies with WillScot policies and all relevant laws and regulations. The supervisor of Electrical will maintain excellent service standards, respond efficiently to customer and vendor inquiries, and strive for high customer satisfaction. This role requires a strong understanding of electrical systems, excellent problem-solving skills, and a commitment to safety. WHAT YOU'LL BE DOING: Environment, Health & Safety Conducts business in compliance with all Environmental Health & Safety Policies. Conducts periodic safety meetings and maintains safety documents and logs. Manages employee health and safety through Safety Save, training, observations, and regularly scheduled assessments. Ensures operating standards are trained, communicated, and maintained. Operations Provides direct and indirect managerial oversight to branch operational employees to include, as applicable: Journeyman-Electrical Apprentices-Electrical Lead Journeyman-Electrical Familiarity with local electrical codes and regulations, especially those relevant to temporary installations. Ensure all electrical work is in compliance with relevant codes, regulations, and safety standards. Maintain a strong commitment to safety protocols, identifying and addressing potential hazards. Install and maintain electrical systems, wiring, and fixtures in accordance with local and national codes. Follow electrical blueprints, schematics, and specifications to determine the layout of electrical wiring and equipment. Inspect electrical components, such as transformers and circuit breakers, and identify potential issues. Perform routine maintenance on electrical systems to ensure safety and efficiency. Diagnose and troubleshoot electrical problems, providing effective and timely solutions. Leadership Responsibilities Supervision and Leadership: Oversee the daily activities of the electrical team, ensuring tasks are completed efficiently and on schedule. Team Coordination: Assign tasks and responsibilities to electricians, apprentices, and other team members, ensuring optimal workflow and productivity. Mentorship: Provide training, guidance, and support to apprentice electricians and service technicians to enhance their skills and performance. Quality Control: Monitor the quality of work performed by the team, ensuring compliance with all relevant codes, regulations, and safety standards. Communication: Serve as the primary point of contact for contractors, clients, and other departments regarding electrical installations, repairs, and project progress. Safety Oversight: Ensure adherence to safety protocols, addressing and mitigating potential hazards on the job site. Compliance: Ensure all electrical work complies with local electrical codes, regulations, and national standards, particularly for temporary installations. Technical Tasks: Install and maintain electrical systems, wiring, and fixtures according to blueprints, schematics, and specifications. Inspect electrical components, such as transformers and circuit breakers, to identify and address potential issues. Perform routine maintenance and troubleshoot electrical problems, delivering timely and effective solutions. Record Keeping: Maintain detailed records of all work performed, including materials used, hours worked, and completed tasks. Other duties as assigned. EDUCATION AND QUALIFICATIONS: Requirements High school diploma or GED. Valid Supervising Journeyman Electrician License. 3 years' experience managing 10 or more employees across more than one location. OR 2 years of electrical experience with WillScot MS Office/Excel/Word/Outlook experience Experience working directly with customers by phone and email. Strong customer service orientation, active listening, excellent oral/written communication Ability follow direction and meet deadlines in a fast-paced environment. Experience applying creativity to problem-solving. Build sustainable relationships and trust with vendors through open, proactive communication. Ability to effectively manage multiple, changing priorities in a fast-paced environment. Preferred Requirements: Bachelor's degree preferred. 5 years electrical experience Project management, quality control and optimization. Familiarity with directing Journeyman and large projects from start to finish. Apprenticeship program experience. Familiarity with DOT compliance and vehicle telematics. Hours of Service regulations, Electronic Logging Devices, permitting, etc. Experience working with outside vendors, including pricing and schedule negotiations

Job Description Falcon Services, Inc. in Portland, OR is actively seeking a reliable Residential Electrician to perform a variety of work for our residential clients, including service calls, new installations, upgrades, and repairs. Are you career-minded and reliable? Do you have great communication skills, both verbal and written? Then please continue reading! This electrical technician position earns a competitive pay of $30 - $60/hour, depending on skills and experience with leadership and growth opportunities. We provide great benefits and perks, including great pay and exceptional culture. Additionally, we offer our Residential Electrician ongoing training, paid birthdays, paid holidays after your first year, weekly pay and direct deposit, company-provided vehicle, gas card/company credit card, uniforms and iPad, AFLAC, company-sponsored retirement plan, and there's no weekend work required! If this sounds like the right electrical technician opportunity for you, apply today! ABOUT FALCON SERVICES Falcon Services is a locally owned home services company offering a diverse and experienced background in both residential and light commercial contracting. Regardless of scale or budget, we work diligently to ensure that a highly positive customer experience is delivered with each and every project. Embracing our core values of safety, honesty, integrity, trust, and reliability, our professional team plays a vital role in maintaining our extremely positive high-performance reputation in the region. Because they deliver top results for our clients, we proudly offer them competitive pay, fantastic benefits and perks, and supportive company culture. QUALIFICATIONS Relevant residential experience Intermediate computer, phone, and paperwork skills Physical ability to perform the requirements of the position A valid driver's license and good driving record 3+ years of in-home electrical experience preferred Are you optimistic? Are you a reliable employee? Are you career-minded and eager to grow your electrician skills? Do you maintain a professional appearance? Are you detail-oriented? Do you thrive on being organized and prepared? If yes, then send us your information! ARE YOU READY TO JOIN OUR ELECTRICAL TECHNICIAN TEAM? If you feel you'll be perfect as our Residential Electrician, apply now using our initial 3-minute, mobile-friendly application. Location: 97225 Must have the ability to pass a drug test and background check. Job Posted by ApplicantPro

Direct Hire Madden Industrial Craftsmen is looking to fill a Direct Hire LME position with a unionized company located in Portland, OR. The person in this position will be in charge of troubleshooting, diagnosing, repairing, adjusting and installing as well as comfortable with hydraulic and pneumatic systems. You will need to have a solid background in electrical work! Friendly reminder : This is a Graveyard shift position. If you enjoy getting up with the sun, this position is NOT for you. We respect that about you -- please respect us too and do not apply for a graveyard shift position. We feel that sounds fair. If you WANT a graveyard shift position, APPLY today! We'd love to schedule a conversation. Responsibilities: Able to replace, repair, and adjust to manufacturer specifications: Bearings, seals v-belts, chains Air valves, hydraulic valves Pumps, couplings Process rolls (Corrugating, pressure, glue, etc.) All machinery parts Troubleshoot and repair mobile equipment Perform all jobs safely and properly. Carry out preventive maintenance tasks. Operate and maintain a high pressure boiler, 200 PSI, and 150 HP. Maintain and repair mechanical fixed equipment as well as mobile equipment (forklifts). Fabricate, repair, and install equipment. Maintain and repair building. Communicate with supervisor and production team on maintenance issues. Be able and willing to accept responsibility for maintaining the plant on a shift working independently, and without other help. Able to manage paper work for work orders, PM's, and stores inventories as required. Other duties as specified by supervisor. Qualifications: Welding Arc (Mig & Stick) Gas Cutting Preventive maintenance Oil Viscosity's Difference and usage of greases Application and proper amount of lubricant Inspection for worn, broken, out-of-line and missing parts Read and understand machine manuals, and troubleshooting manuals Parts identification Operating shop machines/tools Grinders Drill Press Precision tools: micrometers, calipers, feeler gauges, dial indicators, etc Current LME or Electricians License / Oregon Schedule : Monday- Friday 11:00pm-7:00am Pay: $70,000 to $79,000/year DOE (shift differential will also apply) Benefits: 401(k) Medical Dental Vision PTO