Service electrician jobs in Palatine, IL

Charter Manufacturing is a fourth-generation family-owned business where our will to grow drives us to do it better. Join the team and become part of our family! ***$5000 Hiring Bonus*** At Charter Dura-Bar, our Maintenance team is the backbone of our operations, keeping everything running smoothly. They tackle a variety of challenges, from installing and maintaining equipment to troubleshooting complex problems and executing preventive maintenance plans. Join our Skilled Trades Team and elevate your talents. POSITION PURPOSE/MISSION: In the electrical maintenance role you will Install, maintain, troubleshoot, and repair all electrical systems of the plant in accordance with codes, regulations, and specifications, ensuring minimum down time of the plant operations, in accordance with company policies and procedures. Support maximizing facility uptime through execution of rolling equipment setups. PHYSICAL REQUIREMENTS: Constant standing. Frequent lifting up to 10 lbs. Occasional carrying, lifting to 60 lbs, hand use, pushing/pulling, reaching, sitting, below waist level work, complex neck/spinal motion, and walking. Minimal climbing, foot use, and lifting up to 120 lbs. Ability to meet the physical requirements, with or without reasonable accommodation, as provided in detail in the Job Analysis Database MINIMUM QUALIFICATIONS: High School Diploma or GED. Accredited maintenance apprenticeship or two years technical training with two plus years' industrial electrician experience. Five plus years' industrial electrician experience or equivalent combination of education and experience Demonstrated ability to read and interpret documents such as wiring diagrams, schematic drawings, instructions, safety rules, code books, and specifications. Demonstrated ability to inspect electrical systems, equipment, and machines for possible problems. Knowledge of medium voltage power distribution systems. Knowledge of drives, controls, motion controllers, PLCs, and/or motors. Understanding of national electric code (NEC) and NFPA-70E. Ability to operate mobile equipment such as forklifts, overhead traveling cranes, and aerial lift platforms in a safe and professional manner. Ability to use math skills including fractions, percentages, geometry, and probability. Ability to read and understand technical procedures Good verbal and written communication skills. Ability to follow and give instructions. Ability to work well with other employees. Proficient in basic computer skills. Knowledge of lockout/tagout procedures. PREFERRED QUALIFICATIONS: Knowledge of silicon-controlled rectifiers (SCR), rectifiers, capacitors, and resistors. Advanced knowledge of PLC programming (Allen Bradley, Siemen, GE, etc.) Advanced knowledge of operation of SCRs, rectifiers, capacitors, and resistors. Advanced knowledge of Proportional Integral Derivative (PID) troubleshooting experience. Machine tool, forklift truck, and crane experience. Advanced knowledge and aptitude on hydraulic, pneumatic, combustion, machining, and mechanical systems. Troubleshooting experience with automated systems (material handling, machine tools, and metal casting equipment) Work experience in a foundry environment. MAJOR ACCOUNTABILITIES: Perform advanced problem solving by identifying, troubleshooting, and correcting electrical issues. Perform a wide variety of installation, maintenance, and troubleshooting work to keep production and support equipment in operating condition. Act as subject matter expert for electrical systems. Analyze test results, machine error messages, and information obtained from operators to diagnose and repair. May perform ARC flash program. Layout control panels using schematics and I/O mapping. Perform a wide variety of electrical installation, maintenance, and troubleshooting work to keep production and support equipment in operating conditions. Plan, layout, and install complex wiring circuits and distribution centers in conformance with established electrical codes; plan, measure, bend, and fir conduit. Install and troubleshoot motor control centers, power distribution panels, lighting panels, and controls on plant equipment such as bar pulling machines, cut off equipment, centerless grinders, trepanning lathes, dust collectors, melting and holding furnaces, and other similar types of equipment. Repair, replace, and connect single or three-phase motors AC or DC, on all types of production and support equipment. Maintain and replace starter, contactors, relays, timers, limit switches, and counters. Use material handling equipment when performing certain electrical maintenance work; operate a forklift truck for transporting equipment and lifting employees; use specialized power equipment for pulling cable and wire. Use multimeters and other test instruments when troubleshooting electrical circuits; interpret resistance, voltage and amperage readings to arrive at the solution to electrical problems; use instrumentation built into equipment to diagnose certain malfunctions. Proceed independently when installing or troubleshooting electrical equipment; obtain needed information form wiring diagrams, schematic drawings, and code books. Follow all plant safety rules; including lock out of all plant equipment so that it is safe to work on; use safety equipment appropriate for the job; be aware of the safety of others. Follow Environmental, Quality and Safety Management System procedures and requirements. Ability to meet the essential job requirements, with or without reasonable accommodation, as outlined in the job description. #LI-Onsite #LI-ME1 The entry hourly rate for this position is $35.25 per hour. The actual base pay offered to the successful candidate will depend on various factors, including but not limited to job-related skills, experience, and qualifications. Compensation decisions are tailored to the unique circumstances of each position and candidate.We offer comprehensive health, dental, and vision benefits, along with a 401(k) plan that includes employer matching and profit sharing. Additionally, we offer company-paid life insurance, disability coverage, and paid time off (PTO).

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Butler, WI Job Type: Full Time Shift(s) Available: 2nd Compensation: $36.15/hr Benefits Information Competitive Pay Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Production: health benefits commence on the 1st of the month after 90 days of employment Salary: health benefits commence on the 1st of the month following the date of hire Principal Accountabilities Performs work assigned by supervisor Identify follow-up work and parts required Assist in development and implementation of new systems Complete, Sign and return Work Order to Maintenance Supervisor complete with; Work Description, Symptoms, As Found, As Left, Start / Finish time, and Labor Hours and Note Deficiencies, Delays, any Job Plan Feedback Help promote and communicate Maintenance and Reliability to the Organization Other duties include housekeeping, safety training, and meetings Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older 2 years industrial maintenance experience Excellent communication skills (English written, verbal, listening) Ensure compliance with all local codes, regulations Preferred Qualifications Associate degree in Electronic Engineering or significant experience in PLC and control system troubleshooting High School Diploma or equivalent Troubleshoot limit switches, photo eye and proximity switches Proficient in reading ladder diagrams and be able to troubleshoot PLC machines without the aid of a computer Trouble shoot, repair and replace faulty electrical components through the use of hand tools and electrical test equipment Measure, cut and bend conduit such as rigid EMT, PVC, and IMC utilizing hand tools and benders Be able to Set up and troubleshoot drives, showing understanding and ability to change settings Troubleshoot PLC on line Understand the Hydraulic, pneumatic and vacuum system concepts Experience with Microsoft Office Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

The electrician technician will handle troubleshooting and repairs to keep equipment running and minimize downtime while supporting all other members of the maintenance group with any other repairs, projects, etc. deemed necessary by the department manager. Proficient with electrical troubleshooting and repairs. Test and replace fuses. Test and replace solenoids. Test and replace contactors / relays. Test and replace proximity / limit switches. Reset and replace breakers / motor starters. Adjust and replace photo eyes. Able to make conduit runs, wire pulls, and wire terminations. Proficient in performing pneumatic and hydraulic system repairs. Proficient working with single phase / 3 phase / 110V, 240V, 277V, 480V, and 24V control systems. Able to work with Voltmeter/Amp Meter to troubleshoot electrical systems. Proficient reading schematics/blueprints to troubleshoot electrical systems. Able to troubleshoot AC / DC control circuits. Able to troubleshoot motors and drives, then replace if needed. Proficient at troubleshooting PLC's and ladder logic. Able to cross reference and change out electrical devices with other brands. Able to troubleshoot by phone while communicating with other maintenance personnel or machine techs. Able to circumvent problems and find ways to keep machines running. Able to perform project work with little supervision. Able to communicate and problem solve with foreign and domestic techs by phone and online support. Perform electrical building maintenance. Assist with electrical PM as needed. Proficient with mechanical troubleshooting and repairs. Fluent with schematics and blueprints. 480V 3 phase wiring expertise. Comfortable working independently. In addition to the functions listed above, the employee is expected to: exercise honesty, integrity and respect with all clients and co-workers, maintain a professional appearance and demeanor, demonstrate a positive attitude, communicate effectively with co-workers and clients, work with accuracy, efficiency, and attention to detail, maintain good attendance by working when and where directed, work safely in compliance with all safety policies, respect the work environment and keep it as neat and clean as possible, and exercise initiative to learn new skills and tasks and to help co-workers when possible. The employee is also expected to perform such other duties and functions as required and assigned from time to time. Qualifications: High School Diploma/GED preferred. Good verbal and written communication skills with ability to communicate effectively with contractors, service techs (onsite/phone support), and fellow employees. Understands various aspects of an industrial facility including structural, electrical, plumbing systems, etc. Ability to work additional hours and weekends as necessary to meet business plan objectives. Proficiency in MS Excel & Word is a plus. Proficient with industrial trouble shooting skills. Proficient with various software and drives. Fluent with schematics and blueprints. 480V 3 phase wiring experience. Proficiency in MS Excel & Word is a plus Strong industrial trouble shooting skills. CNC background a plus. 4 years manufacturing experience preferred. Demonstration of minimum proficiency with the English language in order to ensure effective new hire training and on-going communications about safety and quality issues. Machines/Tools/Equipment: Voltmeter, conduit benders, assortment of hand and small power tools, computer, basic office equipment, tow motor, etc. Salary-$35-$45 depending on experience. Safety: Employees are expected to follow all facility safety guidelines that include adhering to GMP (Good Manufacturing Practices) and Food Safety as outlined during their training. Working Conditions: Manufacturing environment working around machinery, moving equipment, and loud noise (hearing protection required) Environment is not climate-controlled and there is exposure to a wide range of temperatures (temperature varies depending on work/machine location and ranges from 50 degree F to 100 degree F). Possibility of outside work in all types of weather conditions (including heat, cold, rain, and snow). The proposed salary range for this position is $35-$45 per hour depending on experience. WE ARE AN EQUAL OPPORTUNITY EMPLOYER. We strive to create and maintain an inclusive and diverse workforce where everyone feels valued, respected, and included. We consider applicants for all positions without regard to age, race, color, religion, creed, sex, national origin, disability, sexual orientation, citizenship, veteran status, gender identity or any other legally protected status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of a job.

Responsibilities: Install, repair, calibrate, and inspect electrical devices, equipment, and circuits in the plant Receive and inspect wiring diagrams, drawings, and specifications to resolve electrical needs Repair or replace faulty motors, switches, control panels circuit breakers, control devices, batching systems, control instrumentation, and other plant electrical and electronic equipment Plan and perform work on energized circuits Measure, cut, bend, and install fittings, switches, controls fixtures, and wires Connect all types of electrical equipment for new installations Plan and perform skilled soldering repairs, installation, and calibration of thermocouple and pyrometer-controlled systems Minimum skills / qualifications: High School Diploma or equivalent Journeyman level Electrician experience Experience in industrial control, lighting, and wiring Must be able to stand for 8 hours Must be able to lift twenty (20) pounds Preferred skills / qualifications: PLC knowledge

Full-time Description TR Miller Heating, Cooling, Plumbing and Electrical is a fast-growing company built on trust, and integrity. We're more than a service provider - we're a team that genuinely cares about people . We are looking for Residential Service Electricians who shares our commitment to customer satisfaction and views this opportunity not just as a job but as a long-term career. Our Electrical Technicians will play a crucial role in diagnosing, troubleshooting, and resolving electrical issues, ensuring the comfort and safety of our customers. Job Responsibilities Run on average 2-5 residential service calls daily Accurately troubleshoot, diagnose, and fix electrical and mechanical issues. Repair major residential electrical wiring components, assemblies, and systems. Inspect electrical components during and after installation. Utilize skills in conduit bending, wire pulling, etc. Follow all safety guidelines and report unsafe actions and conditions. Present solutions based and pricing to residential customers based on their needs. Have and maintain a clean driving record. Pay and Benefits Pay: Potential Earnings: $80,000 - $130,000/annually Schedule: Monday - Friday 8:00am - 5:00pm No on call Company supplied, take home, reliable work truck Weekly Paychecks Health Insurance Dental Insurance Vision Insurance Life Insurance Pet Insurance Short-Term and Long-Term Disability Employee Wellness Tuition Reimbursement Employee Discount Program Tool Buy Back Program Up to Two weeks of Paid Time Off yearly Paid Holidays 401(k) plan with a 4% company match A family. This is last on the list because it's the most important. We care about our team and expect you to bring that same care when you join. We do a lot more than just work together. You'll come to love our company outings and you'll build life-long friendships at TR Miller Heating, Cooling, Plumbing, and Electrical. About Us TR Miller Heating, Cooling, Plumbing and Electrical has been serving Plainfield and the surrounding area since 2008. You've probably seen our trucks and our ads. What you don't know is what it's like to be a part of a team like this. People often come to us looking for a job. They stay with us because they find a fulfilling career, room to grow and opportunities to excel. If you want to be part of something bigger than just a job - make this career move and find exactly what you're looking for. You will work in a place where you will be appreciated by your team and customers, and where your work has a direct effect on the success of the company. If this sounds like you, spend a little time learning about TR Miller Heating, Cooling, Plumbing, and Electrical by visiting TRMillerHeatingandCooling.com. When you're ready, please follow the directions to apply for this position. Proudly recognized on the Inc. 5000 list for the 6th year in a row - TR Miller continues to grow as one of North America's fastest-growing private companies, thanks to a relentless team spirit and unwavering drive for excellence. Recognized as Chicago Tribune's Top Workplace of 2023 Equal Opportunity Employer Everyone is required to submit a pre-employment background check prior to start date. Requirements 3-5 years of residential service electrical experience Understanding of home generator systems is beneficial Ability to develop, calculate, and interpret electrical schematics Trade school or college education is an advantage Physically capable of standing, sitting, moving, squatting, and walking for the duration of shifts Able to lift at least 50 pounds Ability to climb ladders Knowledge of electrical systems and wiring (including 120/240 Volts) Capability to work safely and independently while troubleshooting and repairing electrical systems

Job DescriptionSalary: $32- $45 per hour, based on skills and experience. Dubak Electrical Maintenance Group is looking for Service Electriciansthat are tasked to respond to requests for isolated repairs and upgrades. They have skills troubleshooting wiring problems, installing wiring in existing buildings, and making repairs. Your job duties include inspecting and testing electrical components to diagnose problems, repairing broken electrical components, and installing updates for outdated electrical systems. You may work independently or with a partner, and you typically drive a truck or van with tools and materials to each job site. Must have Customer Service skills 5+ years previous Service Electrical experience Working knowledge of installing electrical systems Working knowledge of the NEC Ability to work independently Possession of electrical hand tools and test equipment Must hold a valid driver's license and a clean driving record. Must be willing to travel, work nights, weekends, and overtime. Willing and able to maintain strict adherence to safety rules and regulations Benefits: Competitive Salary Insurance (Health, Dental, Vision, Life, Short Term Disability, Long Term Disability, among many other voluntary benefit options) Paid Holidays Paid Time Off 401k and Profit Sharing Training Reimbursement Program Positive Work/Life Balance Opportunity for Advancement Dubak Electrical Group, LLC and its affiliates is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, national origin, ancestry, gender, gender identity, marital status, status with regard to public assistance, citizenship status, physical or mental disability, sexual orientation, membership or activity in a local commission, veteran status, age, or any other status protected by law. Experience: Service Electrical Journeyman: 5 years (Preferred) Industrial electrical experience Education: High school or equivalent (Preferred) Work authorization: United States (Required)

Join Our Team of Professional ElectriciansDo you value professionalism and punctuality? Do you want to work with the best pros in the electrical industry? Then you could be a candidate for Mister Sparky. If you value a rewarding career and would like your customers to be genuinely satisfied, you'll be fit for our team! Opportunities for professional electricians and customer service professionals are now available across the country. JOB SUMMARY This position performs and coordinates the installation and service of electrical products and services in a residential and light commercial setting. JOB DUTIES Installation, repair, and maintenance of residential and commercial electrical equipment and services Determines general condition of all electrical equipment, can troubleshoot electrical malfunctions, and determine the extent of necessary repairs Works with and understands blueprints, electrical schematics and job specifications as it applies to your craft Identify proper materials and material quantities for new and existing repair projects Use the Straight Forward Pricing Guide, accurately present repair or installation options, and complete safety inspections MINIMUM REQUIREMENTS 3+ years of verifiable residential electrician experience High school diploma or equivalent Background check and drug screening Clean driving record Ability to communicate effectively to clients about issues and provide accurate solutions Benefits Great culture and family like environment Uniforms and uniform service Company vehicle and fuel card Medical insurance 401 (k) Compensation: $25.00 - $30.00 per hour Join the Mister Sparky Team! We want to make joining our team as easy as possible. Our team members are the most valuable assets in our organization. It's true, our employees come first! How do we prove it? First things first. Pay- We believe the best performers deserve the best pay. That's why we want to pay YOU the best competitive rate. Flexibility- We want YOU to have time for the most important things in your life. Our scheduling is flexible. Find out how we do it. Career Path- We offer you an unlimited future with our world class training programs. Our training programs include Technical Training, Virtual technical training, communications, sales, and more! If you are serious about your career and want to learn from the best in the industry apply today! So, if you have a great attitude and a strong work ethic, and are someone who takes pride in the work you do, then we want to hear from you! Each franchise location is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. The franchisee sets their own compensation and benefits. All inquiries about employment, benefits, scheduling and compensation at this franchise should be made directly to the franchise location, and not to Mister Sparky Corporate.

Crown CAPP is seeking an experienced Industrial Electrician. This position will troubleshoot, repair, replace, maintain electrical/ systems for production related equipment and building utilities within a high-speed metal packaging manufacturing facility. This is an hourly position in high-speed, high-volume manufacturing environment where compliance to all safety policies, procedures and regulations is our way of doing business. We are looking for team-oriented individuals who are committed to customer quality, continuous improvement and achieving World Class Performance. Hourly Rate: $40.00/hr Primary Hours/Shift: 3rd Shift (10:00pm - 6:30am) Day to day responsibilities will include the following: Perform preventive maintenance inspections on production equipment as needed and assigned Assist in developing related preventive maintenance that do not currently exist. Troubleshoot of circuits as required to repair, adjust, calibrate, replace, modify electrical components and devices of production equipment. Knowledge of the requirements and use of Lockout Tagout. Knowledgeable of and conform to the requirements of NFPA70E, Arc Flash. Other duties as assigned. Job requirements: The successful candidate will possess the following skills and knowledge: High School Diploma or GED required. 5+ years of experience as a Maintenance/Industrial electrician in a manufacturing environment highly preferred. Experience troubleshooting and repairing of high-speed manufacturing equipment. Electrical, electronic, pneumatic & mechanical knowledge, comprehension, and skills Troubleshooting ability of AC/DC control circuits 120/240 VAC and 440 VAC single and three phase power circuits Knowledge of and ability to troubleshoot variable frequency drives, AB Power Flex 40, 525 & Control Techniques An understanding of ladder logic AB RS Logics 5, 500, & 5000 Knowledge of and ability to troubleshoot Programmable Logic Controllers (PLCs) - Allen Bradley PLC 5, SLC 500, Compact Logics Must be able to comprehend and comply with all OSHA and company safety and electrical regulations including Lock Out / Tag Out, and Arc Flash protection Use of hand tools, Multi-meters Analog & Digital, ammeters, amp probes Ability to read and understand manuals, prints and electrical schematics Good communication and basic computer skills Planning and organizing skills Physical requirements: Work from ladders, lifts, catwalks above floor level (4-10 feet); occasionally at ceiling height (20+ feet) Frequent standing, walking, climbing, reaching, bending, squatting, & reaching above shoulder level Pushing, pulling, and lifting requirements: 25+ pounds. Good Color vision Exposure to high levels of noise (hearing protection required in plant area)

ELECTRICIAN The Industrial Electrician is responsible for the safe, efficient, and effective operation of equipment in VVF's operations. Basic Minimum Requirements: Must have five (5) years on-the-job experience as an industrial electrician. Experience in electrical troubleshooting, and installing and repairing pneumatic/electrical instrumentation, power distribution, and control/power wiring. Ability to read and interpret electrical schematics, and national electrical code. Experience working with AC/DC drives and motors, PLC's, sensors, and control devices. Experience with various Servo/Stepper/Custom drives systems as used on existing equipment. (Kinetics/Sercos/Lexium/Emerson Servos, Parker Stepper Drives, etc.) Experience with ethernet/RS232/RS485/Modbus+/DeviceNet communications to various equipment types in order to troubleshoot, diagnose, program and repair malfunctions. Experience working with mechanical components and systems, (motor, gearbox, bearing, driveshaft, sprockets, roller chains, etc.) Must have basic standard and metric hand tools (e.g. sockets, wrenches, pliers, channel locks, wire cutters). Ability to operate shop equipment: grinders, belt sanders, drill press, band saws, hydraulic press, electric drills, etc. Ability to work any shift, and overtime as required. Preferred Qualifications: Basic knowledge of a Computerized Maintenance Management System (CMMS). Ability to read and interpret drawings, hydraulic schematics and technical manuals. Ability to work with Production Personnel to implement minor operational changes in the various Control Systems through hardwiring and PLC programming. Ability to use the Internet to obtain manuals, information and remote support if required. Ability to program PLC's. Experience working with, and troubleshooting Programmable Logic Controllers (PLC's) (AB SLC500-ControlLogix/TI-505/Modicon Quantum-984). Experience working with Hydraulic Systems, Cylinders, Pumps, Valves, etc. Experience working with piping. Experience rebuilding and overhauling packaging equipment. Physical Requirements: Requires sufficient physical ability to walk, stand, sit, and climb stairs; to frequently bend, squat, crouch, kneel, twist, and make other movements in the performance of daily activities; grasping, handling/fingering and using hand tools; to reach above shoulders and outward, and lift, carry, push and/or pull moderate amounts of weight. Work is performed in an internal and external plant environment; confined space entry required; exposure to noise, dust, and odors; all types of weather and temperature conditions; frequently at heights. Key Responsibilities: Coordinates troubleshooting and correction procedure documentation for all electrical items and issues where possible. Includes updates of existing procedures and development of new procedures. Follows NEC and NFPA 70E electrical standards and takes corrective action with engineering on any systems that are found to be in violation of these standards. Assists in remote troubleshooting when VVF engineering assistance is required. Coordinates and verifies that proper documentation is provided in all completed work orders that detail the issue reported and the electrical troubleshooting and repair steps taken to correct them. Performs a wide variety of service work in one or more specialized maintenance area such as mechanical, electrical, hydraulics, or machine servicing. Installs new machines by installing conduit, wire and electrical equipment; using hand tools and test equipment. Repairs electrical systems and equipment by diagnosing malfunctioning electrical devices, determining faulty wiring; inspecting and testing. Maintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs. Performs general manual labor work. Performs all duties in a safe manner, utilizing safety practices and procedures required by VVF and applicable law (e.g. OSHA, etc.), personal protective equipment, and reporting procedures. Reviews all pertinent safety material before conducting new assignments. Monitors for, and reports unusual occurrences to management. Maintains all equipment and facilities in a clean, orderly and operating condition. Trains other employees as required. Completes work orders as required. Performs other duties and responsibilities as assigned by management. No task or duty is exclusive to a classification or skillset. An employee working in this classification is expected to perform various duties and tasks that traditionally may not have been assigned under a narrower job classification. Note: The above statements shall not be construed as a complete description of all the work requirements. VVF is an equal opportunity employer. We evaluate qualified applicants, without regard to race, color, religion, national origin, sex or gender, age, disability, veteran status, sexual orientation, gender identity or expression, genetic information, including the perception that a person has any of those characteristics or that the person is associated with a person who has, or is perceived to have, any of those characteristics, or any other consideration made unlawful by applicable law. VVF is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please call Human Resources at ************** and let us know the nature of your request and your contact information.

Job Description As the on-site electrical expert, the Industrial Electrician provides advice and guidance to other staff members. This includes training new employees and imparting knowledge on electrical matters to those in lower mechanic levels. Responsibilities Carry out the prompt repair, replacement, and maintenance of electrical wiring and circuits on production equipment Continuously researches and evaluates new tools and technologies for diagnosing, repairing, and preventing electrical issues in equipment Prepares codes for electronic and electrical equipment, takes charge of the installation, care, and overhaul of electrical controls, wiring, and lighting networks Facilitates the installment of recent or revised equipment and checks for the optimal functioning of electrical parts Preserves correct electrical illustrations, whether they are in hard-copy or digital form Diagnose malfunctioning systems and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes Repair or replace wiring and equipment, using hand tools and power tools Assemble, install, test and maintain electrical or electronic wiring, equipment and fixtures using hand tools and power tools Requirements Qualified candidates must have 5+ years of relevant experience and have the demonstrated ability to troubleshoot, diagnose, and repair equipment & components including electrical, mechanical, and/or electronic with minimum supervision or assistance Basic computer skills with Microsoft windows operating environment for internet based work order system Test equipment operation including Digital multi-meters and Amp meters Electrical theory including basic /OHMs law application Basic mechanical skills with pneumatic and hydraulic systems Experience with AC/DC Drives and PLC's in a manufacturing facility 5 years of High-Voltage systems up to 480 Volt 3-phase power and 500 volt D-C, AC/DC Drives and PLC's in a manufacturing facility Electrical theory including basic ohms-law application with a wide range of technical and mechanical knowledge and skills, as well as basic mechanical skills with pneumatics and hydraulic systems Benefits Excellent benefit package including health, dental, life insurance, and short-term disability. 401K plan with employer match. Salary commensurate with experience Job Type: Full-time Benefits: Dental insurance Health insurance Life insurance Paid time off Vision insurance Ability to Commute: Bloomingdale, IL 60108 (Required) Work Location: In person Pay: starting at $40/hr

Job Purpose Statement: Perform duties to maintain, repair and install a variety of electrical and electronic processing equipment instruments and controls, communications equipment and data transmission, security, lighting and HVAC systems. Reporting Structure: Supervisor, Electrical Maintenance and Assistant Supervisor, Electrical Maintenance. Essential Job Functions: 1. Complete scheduled preventive and corrective work orders and check with the Facility Supervisor and the Electrical Supervisor to prioritize the daily work. 2. Maintain and repair all installed electrical/electronic equipment including motors, controllers, generators, variable frequency drives, processing equipment, metering, monitoring and controlling devices, HVAC, lighting, security, communications systems, and external PLC circuitry. 3. Maintain, repair and/or install hydraulic and pneumatic control systems. 4. Troubleshoot, analyze, test equipment to diagnose the nature of the equipment malfunction. Perform necessary repairs, test and restore to operation. 5. Perform preventive maintenance, including checking fluid levels, drive belts and brushes. Test equipment for proper operation, cleaning slip rings and Eddy Current couplings and do thermal testing of contacts, bus bars and other electrical connections. 6. Install new equipment, conduit, wiring and connection boxes. Determine the parts required for proper installation and obtain them. Make electrical connections and test for proper operation. 7. Operate electrical power distribution system, including the emergency generators and 4160-volt switchgear. Parallel the 4160-volt generators with supplied power to test generator operation. 8. Modify and rewire installed electrical systems in accordance with engineering work orders and documents. Update existing drawings as required. 9. Design and build special test fixtures as needed. 10. Respond to emergency calls on a 24-hour basis. Maintain contact with the plants via phone during off-hours. On-call is required. 11. Perform other duties in a safe manner as assigned by immediate supervisor or other supervisors as required. Title: Instrument Repairer Department: Electrical Maintenance Physical and Visual Activities: Physical and visual activities that are commonly associated with the performance of the functions of this job. Standing, Walking, Sitting, Lifting, Carrying, Pushing, Pulling, Climbing, Balancing, Stooping, Kneeling, Crouching, Crawling, Reaching, Handling, Fingering, Feeling, Talking, Hearing, Acuity far, Acuity near, Depth Perception, Field of Vision, Accommodation, Color Vision. Heights and ladders. Physical Demands: Physical demands commonly associated with the performance of the functions of this job. Lift up to 1 lb up to 15% of the time, Over 1 lb up to 5 lbs over 70% of the time, Over 5 lbs up to 25 lbs over 40% up to 70% of the time, Over 25 lbs up to 60 lbs over 15% up to 40% of the time, Over 60 lbs up to 15% of the time. Environmental/Atmospheric Conditions: Environmental and atmospheric conditions commonly associated with the performance of the functions of this job. Inside, Outside, Both, Extremes of cold, Cold temperature changes, Extremes of hot, Hot temperature changes, Wet, Humid, Noise, Vibration, Hazards, Fumes, Odors, Toxic conditions, Dust, Poor ventilation. Knowledge: Use of electrical and electronic test equipment, i.e. (DMM's, oscilloscopes, signal generators), use of pipe bending equipment, (hand, mechanical, hydraulic) threading tools (hand, mechanical, electric), hand fish tapes and powered cable pullers, use of all related hand and power tools (drills, drill press, lathe, mill, belt and wheel grinders, air tools, bending brakes and shears). Ability to comprehend both oral and written instructions in the English language. High School graduate or equivalent. Post high school education in electricity and electronics, with several years of technical training beyond high school is strongly desired. (e.g. CLC, DeVry, Gateway Tech., M.A.T.C., etc.) Such training does not substitute for experience. Examples of Desired Knowledge: Familiarity with 5000-volt power distribution equipment, including proper splicing and termination procedures of shielded and unshielded high voltage cable. Knowledge of special safety considerations and techniques required when working at these voltage levels. Good working knowledge of hydraulic and pneumatic control systems and related electrical interfaces. Ability to analyze and interpret electrical ladder diagrams and electronic schematics to aid in trouble shooting, equipment installation and to determine if electrical operation is proper. A working knowledge of Programmable Logic Controllers (P.L.C.'s) and how to interface them with external electrical apparatus. Knowledge of plant operations and how their actions affect the overall operation of the process. Knowledge of standby electrical power equipment and how to safely and properly interface them with our power distribution systems. Title: Instrument Repairer Department: Electrical Maintenance Experience: Five years minimum in the industrial electrical/electronic field. Machines, Tools, Equipment (Office and Industrial), Software: Bench lathe, mill, break, shears, bolt and wheel grinders, drill press, air tools, personal computer. Variety of electrical and electronic test equipment, pipe bending and threading tools, hand power tools and hand tools, and related stationary power tools. PAPR/PPE and various safety equipment. Licenses/Certifications: n/a Other: Employees in this position shall be required to be legally authorized to operate a motor vehicle for work-related purposes in the State of Illinois. Random substance abuse testing is required for the position. This description should not be construed to contain every function/responsibility that may be required to be performed by an incumbent in this job. Incumbents are required to perform other related functions as assigned. The current starting pay rate for this position is $45.20/hour. The District offers the following benefits: Health and Dental Coverage (including Flexible Spending Accounts for Health and Dependent Care) Life Insurance Coverage Options for Disability Coverage Paid Time Off (PTO) Holiday Pay IMRF Pension and Other Retirement Plans Educational Assistance

Our client is a leader in the food manufacturing industry, they bring over 50 years of experience to delivering high-quality meals across the world! The Industrial Electrician will be responsible for performing electrical maintenance tasks, troubleshooting electrical issues, and ensuring the smooth operation of electrical systems within the facility. This includes diagnosing and resolving issues with power distribution, motors, PLCs, sensors, and other electrical components, as well as ensuring compliance with safety standards and electrical codes. Responsibilities: Install, maintain, test, and troubleshoot electrical systems and equipment, including wiring, circuitry, motors, control panels, and automation equipment. Diagnose and resolve electrical issues in industrial systems, such as motors, PLCs, VFDs, and sensors. Ensure compliance with local, state, and national electrical codes. Read and interpret electrical blueprints, wiring diagrams, schematics, and technical manuals. Utilize voltage detectors and other tools to ensure safety in all electrical work. Collaborate with other teams, including production and engineering, to ensure smooth operations. Participate in programs to improve the functionality of equipment and machinery. Participate in or lead electrical-related projects, including new installations and upgrades. Maintain accurate records of work performed, including repairs, maintenance, and installations. Participate in ongoing training to stay current with industry standards and new technologies. Conduct preventative maintenance programs to ensure the long-term reliability of electrical systems. Qualifications: 3+ years' experience as an Industrial Electrician Familiar with common electrical tools and measuring instruments Experience reading electrical, hydraulic, and pneumatic schematics Strong working knowledge of 480 volt 3 phase electrical distribution systems and motor control Must have a good working knowledge of current National Electrical Codes Experience with hand tools, small power tools and their proper uses Ability to read and understand blueprints and engineering drawings Ability to work 2nd OR 3rd shift hours Compensation: Base salary to 43.00/hour Medical and Dental Benefits kick in after 30 days 401k: 100% match for the first 1$, then a 50% match for the next 5% contribution OT available #INDALL

Our client is a leader in the food manufacturing industry, they bring over 50 years of experience to delivering high-quality meals across the world! The Industrial Electrician will be responsible for performing electrical maintenance tasks, troubleshooting electrical issues, and ensuring the smooth operation of electrical systems within the facility. This includes diagnosing and resolving issues with power distribution, motors, PLCs, sensors, and other electrical components, as well as ensuring compliance with safety standards and electrical codes. Responsibilities: Install, maintain, test, and troubleshoot electrical systems and equipment, including wiring, circuitry, motors, control panels, and automation equipment. Diagnose and resolve electrical issues in industrial systems, such as motors, PLCs, VFDs, and sensors. Ensure compliance with local, state, and national electrical codes. Read and interpret electrical blueprints, wiring diagrams, schematics, and technical manuals. Utilize voltage detectors and other tools to ensure safety in all electrical work. Collaborate with other teams, including production and engineering, to ensure smooth operations. Participate in programs to improve the functionality of equipment and machinery. Participate in or lead electrical-related projects, including new installations and upgrades. Maintain accurate records of work performed, including repairs, maintenance, and installations. Participate in ongoing training to stay current with industry standards and new technologies. Conduct preventative maintenance programs to ensure the long-term reliability of electrical systems. Qualifications: 3+ years' experience as an Industrial Electrician Familiar with common electrical tools and measuring instruments Experience reading electrical, hydraulic, and pneumatic schematics Strong working knowledge of 480 volt 3 phase electrical distribution systems and motor control Must have a good working knowledge of current National Electrical Codes Experience with hand tools, small power tools and their proper uses Ability to read and understand blueprints and engineering drawings Ability to work 2nd OR 3rd shift hours Compensation: Base salary to 43.00/hour Medical and Dental Benefits kick in after 30 days 401k: 100% match for the first 1$, then a 50% match for the next 5% contribution OT available #INDALL

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Plans layout and installs wiring, conduit and electrical equipment in buildings. Measures, cuts, bends, threads, assembles and installs electrical conduit. Troubleshoots Dematic conveying and ASRS systems. Supports project planning and equipment purchases. Installs power supply wiring and conduit for newly installed machines and equipment. Installs distribution and control devices such as circuit-breaker panels, switches, relays, etc. Uses electrical drawings and wiring diagrams and manufacturer instructions to diagnose malfunctioning devices such as transformers, motors and lighting fixtures and replaces damaged or broken components of building installations. Uses electrical drawings and wiring diagrams and manufacturer instructions to test malfunctioning machinery. Diagnoses and repairs or replaces faulty electronic components, such as printed circuit boards and faulty electrical components of machines such as relays, switches and motors, and positions sensing devices. Communicates with equipment manufacturer as needed. Supports maintenance in diagnosing and repairing faulty mechanical, hydraulic, and pneumatic components of machines and equipment. Serves as an electrical SME and ensures plant electrical activities are in compliance with all applicable electrical codes. Completes paperwork as required. Initiates purchase order requests for parts and supplies. In addition to Electrical, works on other aspects of engineering project installations including mechanical, pneumatic, hydraulic, etc. Supports the Facilities Maintenance team as needed. Completes other maintenance repair work as required and works in areas such as building maintenance. Actively participates in root cause analysis and other plant continuous improvement initiatives. Works closely with supervisors and cross-functional teams to identify trends and areas of improvement and implement and sustain continuous improvement initiatives that enhance safety, quality, equipment performance, and efficiency. Complies with safety and GMP requirements. SAFETY RESPONSIBILITY STATEMENT Supports a culture of safe production and exhibits safe work practices. Actively participates in the safety program by engaging in safety activities. Effectively provides and accepts constructive peer-to-peer feedback on safety performance. Adheres to policies, procedures, SOP's, safe work practices, and safety policies and procedures. Reports ALL workplace incidents to supervisor immediately. Communicates concerns to supervisor, reports hazards, and provides input on prevention. Properly uses, wears, and stores Personal Protective Equipment when required. Participates on safety teams and/or completes safety-related activities as part of regular job responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); at least 10 years related electrical maintenance or electrician experience and/or training; or equivalent combination of education and experience. Electrical trade school/certification strongly preferred. Knowledge of AC power from 480 volts to 120 volts and DC power 12 to 24 required. Knowledge of control systems preferred. PERFORMANCE ABILITY Proven ability to Install and repair electrical systems, apparatus, and electrical and electronic components of industrial machinery and equipment of a complex nature. Demonstrated ability to consistently meet quality, safety and efficiency goals. Excellent problem-solving skills required. Good time management skills; ability to prioritize and calmly handle multiple tasks simultaneously in a fast-paced environment; demonstrate a strong sense of urgency; and flexibility to change tasks frequently and work in different areas of Maintenance and locations as business needs require. Strong teamwork and collaboration skills; ability to work and communicate effectively with others; strong attention to detail skills; excellent organizational skills; strong initiative to independently complete tasks accurately and on time; and demonstrated high quality of work. Consistently follows all company policies and procedures, including all safety policies and procedures. LANGUAGE SKILLS Ability to communicate professionally and effectively both verbally and in writing. Ability to read and comprehend instructions, correspondence, and memos such as safety rules, operating and maintenance instructions, and procedure manuals (S.O.P.). Ability to accurately and truthfully complete paperwork. Good communication and interpersonal skills. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Excellent problem-solving ability. OTHER SKILLS and ABILITES Basic computer skills required. Flexibility to work in other areas of Maintenance (i.e. Building maintenance) and at other locations (i.e. BLM 391, Roselle, Knollwood/Scott Drive Corporate) to support business needs. Ability to work off shifts and weekends and to travel to other facilities required. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms (including overhead), including reaching horizontally on a ladder; ascend and/or descend stairs (including ladders); stoop, kneel (including half kneel), crouch, and crawl; and talk and hear. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: Lift up to 60 lbs. from 31-inch shelf and carry for up to 5 ft. and then return 60 lbs. to 31-inch surface. Lift up to 60 lbs. floor to waist height. Push and pull 42 lb. force at 36 inches. Step on/off a 24-inch step. Grasp 50 lbs. of force. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is frequently exposed to herbal aromas, dust, and/or airborne particles, some classified as allergens or irritants. The employee occasionally works in high, precarious places and in outside weather conditions and is occasionally exposed to fumes, cold, and heat. This position works in all areas of NOW's manufacturing facilities with direct exposure to ingredients (powders and liquids), mixes (powders and liquids), equipment, and packaging. The noise level in the work environment is usually moderately loud, and in some areas where louder hearing protection is required. 2025 BENEFITS AT A GLANCE

You may not know our name, but you know our products. What we make is part the places where we live, work and play - all day, everyday. Zekelman is a family of companies - 100% domestic manufacturers - with a legacy dating back to 1877. We're proud to be the largest independent steel pipe and tube manufacturer in North America and the leading innovator in multi-family housing development. We believe in what we build and what we build, builds the world around us. Hospitals, hotels, schools, bridges, airports and more. Come build a career you believe in. About the Role As an Electrician at Zekelman Industries - Atlas Tube in Chicago, you will play a critical role in maintaining and repairing tube mill production equipment to ensure maximum uptime, product quality, and operational efficiency. Reporting to the Shift Manager. This role is ideal for someone with strong electrical aptitude, troubleshooting expertise, and a proactive mindset. You'll thrive here if you enjoy solving problems, working hands-on in a fast-paced environment, and contributing to a safety-first culture. Shift: 11p-7a or 3p-11p Pay: $29.33 - $32.97/hour + Production Incentive What You'll Do • Maintains electrical systems on production equipment following all defined safety procedures, including LOTO compliance • Ensures guards and safety devices are installed and functioning before equipment is turned over to operations • Monitors and inspects equipment using both manual and computerized maintenance systems • Reads and interprets blueprints, schematics, and manuals to perform effective troubleshooting and repairs • Uses hand tools, power tools, hoists, cranes, measuring devices, and testing equipment to perform electrical tasks • Troubleshoots process and equipment problems, accurately identifying and resolving electrical faults • Executes breakdown maintenance, preventive maintenance, and electrical changeovers on production lines • Maintains clean, audit-ready work areas after completing electrical tasks • Provides guidance to co-workers and communicates effectively with team members • Reports unresolved safety, quality, or production issues to supervisor promptly • Performs other duties as assigned Who You Are • Journeyman card, Associate's Degree, or equivalent required (military service considered equivalent to 2-year degree) • 2+ years of electrical maintenance experience in a heavy industrial or manufacturing environment • Experience in tube mill or steel manufacturing preferred • Skilled in reading schematics, using diagnostic tools, and following maintenance documentation • Capable of basic math and using measuring equipment accurately • Strong communication, teamwork, and listening skills • Ability to lift up to 50 lbs. and perform physical tasks such as standing, bending, climbing, and stooping • Proficient in basic computer usage • Maintains regular, full-time onsite attendance per posted schedule • Leads and promotes safe work practices in accordance with OSHA and company policy Physical Abilities • Must be able to lift, bend, climb, stoop, push, and pull; regularly required to stand and use hands or arms in a physically demanding environment. What You'll Get Zekelman Industries offers competitive compensation and excellent benefits, including low-cost, high-quality healthcare and company-paid insurance. Employees also enjoy professional growth opportunities and meaningful recognition: • Healthcare Plan - Company Paid • Dental - Company Paid • Vision - Company Paid • 401(k) with Company Match • Life Insurance - Company Paid • Advancement Opportunities • Company-Paid Training • Paid Vacation & Holidays • Employee Loyalty Awards Zekelman Industries offers competitive compensation and excellent benefits, including low-cost, high-quality medical and dental benefits. In addition, we have an amazing tuition assistance program, a bonus plan, a 401(k) plan with a generous company match, immediate vesting, and much more. M/F/D/V We are Zekelman Industries. We manufacture superior quality tubular and related products, and provide outstanding service for our valued customers. We seek to continuously advance the skills and opportunities of our employees, utilizing the latest technology and management tools available to consistently increase profitability and the enterprise value of Zekelman Industries and of our customers.

Job DescriptionJoin our team if you love creating memorable experiences and being part of a vibrant community! At Lakeshore Sport & Fitness, we bring people together through sport, fitness, and fun across our two Chicago clubs - Lincoln Park and our Illinois Center location in the downtown Loop. Our clubs thrive on community and connection, offering a place where members of all ages can belong, grow, and feel their best. We offer competitive pay, 401(k), PTO, childcare benefits, free club membership, discounts on programs and services, and more. As part of our Maintenance Team, you'll repair and maintain equipment, perform preventive maintenance, and ensure all facilities run safely and efficiently. You'll troubleshoot systems and contribute to the upkeep of a clean, functional environment for members and staff. As the team's Electrician, you'll install, maintain, and repair electrical control, wiring, and lighting systems throughout the club. Key skills: Maintenance, HVAC, electrical, repair, facility operations, safety, troubleshooting, teamwork. Powered by JazzHR 3uAsGcjrtq

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Butler, WI Job Type: Full Time Shift(s) Available: 2nd Compensation: $36.15/hr Benefits Information Competitive Pay Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Production: health benefits commence on the 1st of the month after 90 days of employment Salary: health benefits commence on the 1st of the month following the date of hire Principal Accountabilities Performs work assigned by supervisor Identify follow-up work and parts required Assist in development and implementation of new systems Complete, Sign and return Work Order to Maintenance Supervisor complete with; Work Description, Symptoms, As Found, As Left, Start / Finish time, and Labor Hours and Note Deficiencies, Delays, any Job Plan Feedback Help promote and communicate Maintenance and Reliability to the Organization Other duties include housekeeping, safety training, and meetings Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older 2 years industrial maintenance experience Excellent communication skills (English written, verbal, listening) Ensure compliance with all local codes, regulations Preferred Qualifications Associate degree in Electronic Engineering or significant experience in PLC and control system troubleshooting High School Diploma or equivalent Troubleshoot limit switches, photo eye and proximity switches Proficient in reading ladder diagrams and be able to troubleshoot PLC machines without the aid of a computer Trouble shoot, repair and replace faulty electrical components through the use of hand tools and electrical test equipment Measure, cut and bend conduit such as rigid EMT, PVC, and IMC utilizing hand tools and benders Be able to Set up and troubleshoot drives, showing understanding and ability to change settings Troubleshoot PLC on line Understand the Hydraulic, pneumatic and vacuum system concepts Experience with Microsoft Office Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Job Description ELECTRICIAN The Industrial Electrician is responsible for the safe, efficient, and effective operation of equipment in VVF's operations. Basic Minimum Requirements: Must have five (5) years on-the-job experience as an industrial electrician. Experience in electrical troubleshooting, and installing and repairing pneumatic/electrical instrumentation, power distribution, and control/power wiring. Ability to read and interpret electrical schematics, and national electrical code. Experience working with AC/DC drives and motors, PLC's, sensors, and control devices. Experience with various Servo/Stepper/Custom drives systems as used on existing equipment. (Kinetics/Sercos/Lexium/Emerson Servos, Parker Stepper Drives, etc.) Experience with ethernet/RS232/RS485/Modbus+/DeviceNet communications to various equipment types in order to troubleshoot, diagnose, program and repair malfunctions. Experience working with mechanical components and systems, (motor, gearbox, bearing, driveshaft, sprockets, roller chains, etc.) Must have basic standard and metric hand tools (e.g. sockets, wrenches, pliers, channel locks, wire cutters). Ability to operate shop equipment: grinders, belt sanders, drill press, band saws, hydraulic press, electric drills, etc. Ability to work any shift, and overtime as required. Preferred Qualifications: Basic knowledge of a Computerized Maintenance Management System (CMMS). Ability to read and interpret drawings, hydraulic schematics and technical manuals. Ability to work with Production Personnel to implement minor operational changes in the various Control Systems through hardwiring and PLC programming. Ability to use the Internet to obtain manuals, information and remote support if required. Ability to program PLC's. Experience working with, and troubleshooting Programmable Logic Controllers (PLC's) (AB SLC500-ControlLogix/TI-505/Modicon Quantum-984). Experience working with Hydraulic Systems, Cylinders, Pumps, Valves, etc. Experience working with piping. Experience rebuilding and overhauling packaging equipment. Physical Requirements: Requires sufficient physical ability to walk, stand, sit, and climb stairs; to frequently bend, squat, crouch, kneel, twist, and make other movements in the performance of daily activities; grasping, handling/fingering and using hand tools; to reach above shoulders and outward, and lift, carry, push and/or pull moderate amounts of weight. Work is performed in an internal and external plant environment; confined space entry required; exposure to noise, dust, and odors; all types of weather and temperature conditions; frequently at heights. Key Responsibilities: Coordinates troubleshooting and correction procedure documentation for all electrical items and issues where possible. Includes updates of existing procedures and development of new procedures. Follows NEC and NFPA 70E electrical standards and takes corrective action with engineering on any systems that are found to be in violation of these standards. Assists in remote troubleshooting when VVF engineering assistance is required. Coordinates and verifies that proper documentation is provided in all completed work orders that detail the issue reported and the electrical troubleshooting and repair steps taken to correct them. Performs a wide variety of service work in one or more specialized maintenance area such as mechanical, electrical, hydraulics, or machine servicing. Installs new machines by installing conduit, wire and electrical equipment; using hand tools and test equipment. Repairs electrical systems and equipment by diagnosing malfunctioning electrical devices, determining faulty wiring; inspecting and testing. Maintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs. Performs general manual labor work. Performs all duties in a safe manner, utilizing safety practices and procedures required by VVF and applicable law (e.g. OSHA, etc.), personal protective equipment, and reporting procedures. Reviews all pertinent safety material before conducting new assignments. Monitors for, and reports unusual occurrences to management. Maintains all equipment and facilities in a clean, orderly and operating condition. Trains other employees as required. Completes work orders as required. Performs other duties and responsibilities as assigned by management. No task or duty is exclusive to a classification or skillset. An employee working in this classification is expected to perform various duties and tasks that traditionally may not have been assigned under a narrower job classification. Note: The above statements shall not be construed as a complete description of all the work requirements. VVF is an equal opportunity employer. We evaluate qualified applicants, without regard to race, color, religion, national origin, sex or gender, age, disability, veteran status, sexual orientation, gender identity or expression, genetic information, including the perception that a person has any of those characteristics or that the person is associated with a person who has, or is perceived to have, any of those characteristics, or any other consideration made unlawful by applicable law. VVF is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please call Human Resources at ************** and let us know the nature of your request and your contact information.

Job Description Industrial Electrician - Manufacturing - Base Salary to 43.00/hour - Bartlett, IL Our client is a leader in the food manufacturing industry, they bring over 50 years of experience to delivering high-quality meals across the world! The Industrial Electrician will be responsible for performing electrical maintenance tasks, troubleshooting electrical issues, and ensuring the smooth operation of electrical systems within the facility. This includes diagnosing and resolving issues with power distribution, motors, PLCs, sensors, and other electrical components, as well as ensuring compliance with safety standards and electrical codes. Responsibilities: Install, maintain, test, and troubleshoot electrical systems and equipment, including wiring, circuitry, motors, control panels, and automation equipment. Diagnose and resolve electrical issues in industrial systems, such as motors, PLCs, VFDs, and sensors. Ensure compliance with local, state, and national electrical codes. Read and interpret electrical blueprints, wiring diagrams, schematics, and technical manuals. Utilize voltage detectors and other tools to ensure safety in all electrical work. Collaborate with other teams, including production and engineering, to ensure smooth operations. Participate in programs to improve the functionality of equipment and machinery. Participate in or lead electrical-related projects, including new installations and upgrades. Maintain accurate records of work performed, including repairs, maintenance, and installations. Participate in ongoing training to stay current with industry standards and new technologies. Conduct preventative maintenance programs to ensure the long-term reliability of electrical systems. Qualifications: 3+ years' experience as an Industrial Electrician Familiar with common electrical tools and measuring instruments Experience reading electrical, hydraulic, and pneumatic schematics Strong working knowledge of 480 volt 3 phase electrical distribution systems and motor control Must have a good working knowledge of current National Electrical Codes Experience with hand tools, small power tools and their proper uses Ability to read and understand blueprints and engineering drawings Ability to work 2nd OR 3rd shift hours Compensation: Base salary to 43.00/hour Medical and Dental Benefits kick in after 30 days 401k: 100% match for the first 1$, then a 50% match for the next 5% contribution OT available #INDALL