Service electrician jobs in Woodbridge, NJ - 78 jobs

Job Description Qualifications: Start Time:6:30 AM End Time:3:00 PM ELECTRICIAN - WATER/WASTEWATERTREATMENT FACILITY Basic Qualifications High school diploma or GED. Possess a valid validelectrician certification. Possess a valid driverslicense with a clean driving record. Ideally, youll also have: Five years of experience inthe maintenance of wastewater treatment plants and related equipment, orindustrial setting with experience performing the following: Five years of electricalexperience troubleshooting and repairing: motors, pump controls, VFDs, motoroperated valves, calibrating flow meters, lighting systems and other equipmentrelated to wastewater treatment or similar industrial setting. Proficient in the use of Computerized Maintenance Management Systems (CMMS) Bend/install conduit to complywith NEC code. IR Thermography (basicknowledge) certification is not a requirement but may be asked to try andattain certification. Properly size wire to complywith NEC code. Motor / pulley alignment Troubleshooting a variety ofelectrical and mechanical equipment on site. Ability to prioritize theworkload. Troubleshoot VFD, VFDcontrols, motor windings, lighting systems etc. Proficient in use ofmultimeters, meggers, loop calibrators and other diagnostic equipment. Intermediate knowledge of SCADA controls. Possess a valid driverslicense with no major infractions. Knowledge of the methods,materials, equipment, and instruments used in the maintenance, repair andcalibration of electrical and electronic control systems. Familiarity with theprinciples and practices of wastewater treatment plant operations and processcontrol. Knowledge of the methods,materials, equipment and instruments used in the maintenance, troubleshooting,repair, and calibration of electrical and electronic control systems including distributed Control Systems (DCS); Programmable Logic Controllers (PLC) or PCbased controls; Graphics human machine interface (HMI) or similar IO devices;Instrumentation communication networks (Ethernet, DeviceNet, ControlNet,Profibus) or similar; Servers, drives, actuators, variable frequency drives(VFDs), valves, etc. Knowledge of related state andfederal laws and regulations Working Conditions &Physical Requirements: Safety is a core value at . Weare committed to providing a safe and healthy workplace for all employees. Thisposition will spend a substantial amount of time performing safety sensitivelabor or services. Due to the nature of the job passing a Fitness for Dutytesting is required to ensure candidates for this position are physically andfunctionally fit to perform the essential physical work functions of thissafety sensitive position without posing a direct threat to the health orsafety of themselves or others. The physical and environmentaldemands required to perform the essential duties of this position includestanding, walking, sitting, coordination, balance and agility demands, whichmay include the ability to stoop, kneel, squat, grasp, reach, performrepetitive hand movements. Additional demands may involve a specific level ofdexterity, grip strength, climbing and cardiorespiratory demands. The workareas may be indoor, outdoor, have loud noise, active machinery, high pressurefluid systems, electrical equipment, confined spaces, heights and depths,fumes, air borne particles, noxious gases, and chemicals. The use ofappropriate safety equipment will be mandatory in these areas to preventhazardous contact. Responsibilities: Electrician At , we challenge what iscurrently accepted, so we can shape innovative and lasting solutions fortomorrow. Through the delivery of our operations and maintenance services,youll make it simpler and more seamless for our municipal clients to operatesafely and efficiently, empowering communities to focus on what matters most tothem people. As an Electrician, youll joina collaborative team ensuring that our clients can deliver their services uninterrupted. Based in Hoboken, New Jersey at the North Hudson SewerageAuthority, youll have the opportunity to lead a variety of tasks in thepreventive and corrective maintenance on wastewater treatment plants andrelated facilities equipment on an assigned shift. Youll contribute to thesuccess of our program with efficient preventive maintenance and effectivesolutions to challenges that may arise in municipal facilities. Youll performpredictive, preventive, and corrective maintenance on buildings, structures,grounds, machinery, and lighting equipment; lubricate equipment and check formalfunctions; troubleshoot all electrical systems and subsystems, must know howto properly examine equipment failures to identify root cause and to preventrecurrences; plans and installs new equipment upgrades. Comply with all Healthand Safety Practices and Procedures. Most importantly, youlltake actiontoensure the safety, health and well-being of you and your team. Essential Duties and Responsibilities Assists in planning,scheduling the maintenance and repair of a wide variety of specializedmechanical and electrical equipment in a safe manner. Reads, interprets, and worksfrom blueprints, drawings, sketches, plans, specifications, and mechanicalillustrations. Performs skilled electricalrepair work on water/wastewater treatment plant equipment and relatedequipment. Analyzes equipment failures todetermine cause and to prevent recurrences. Assists Project withrecordkeeping and prepares routine and special reports. Provides on-the-job trainingto less experienced employees. Performs preventive andcorrective and predictive maintenance on mechanical and electrical machinery orequipment. Regularly inspects the workingcondition and maintains the cleanliness and safety of equipment and surroundingareas. Assist with review of capitalimprovement project studies, designs, and contract drawings. Forecast material andequipment needs and performs other duties as required. Comments/Special Instructions Electrician I position to workfor at the North Hudson SewerageAuthority in Hoboken, NJ. Work schedule: Monday through Friday 630 AM to 3 PM,after trained will need to be on rotating on call schedule.

Job Description Residential Electrician ⚡ We invite full-time Residential Electricians to join our team in Union, NJ. Who We Are Service Professionals is on a mission to create remarkable experiences that leave our customers giving us their enthusiastic "Thumbs Up!" This isn't just a goal - it's our promise. We do more than just fixing plumbing, heating, cooling, and electric issues. We consider our job incomplete until we see their thumbs up high in approval. ???? Join us on this remarkable road, where every day our success story is written with thumbs pointed up. What We Offer We are building a culture that values collaboration. We offer strong compensation packages, uncapped performance-based bonuses, and exceptional training programs. These have the potential to be life-changing opportunities for driven professionals. Depending on experience, this role can make at least $25 - $45 an hour. High performers have made anywhere from $80,000 to $150,000 in total compensation. ????Top Compensation: We aim to be the top total compensation benchmark in the industry with the best bonus program available. ???? Exceptional Benefits: We provide our teams with full benefits including health and dental - with deductibles covered. Full-time staff receive a 401k. ???? Your Own Truck: Gas card included. All techs can (and should) take home their trucks to be dispatched from home. ????️ Cutting-Edge Tech: We invest in the tech to make your job easier, more efficient, and, most importantly, more enjoyable. ???? Recognition and Rewards: Hard work won't go unnoticed. We recognize and celebrate your achievements, both financially and culturally. ???? Room for Growth: You're not just another number; you're a person with ambitions. We offer pathways for true career development. ???? Inspiring Work Environments: We understand and respect that life…happens. We take care of our people and support them on their life journeys. Who You Are This will be an exceptional opportunity for you if you have the following skills & experiences. If you don't - you can still apply and learn them with us! ⛏️ You like getting your hands dirty. ???? You embrace technology. ???? You avoid shortcuts when nobody is watching. ???? You make people feel comfortable. You are the kind of person that anyone would send to their own mother's house, without any concerns. People love having you around and value your advice. ???????? You are physically up to the task! This is a demanding job that requires hard, manual labor. What You Know Everyone has a unique career journey. Even if you don't know everything on this list, we encourage you to apply and have a conversation with us. Candidates should have: ???? Deep experience as a licensed & certified electrician, with a focus on the residential sector. ???? Thorough knowledge of safety regulations and local electrical codes. ???? Valid driver's license with a safe driving record. ???? Fluency in English. What Will You Do? First off, you will commit to delivering an exceptional customer experience. Always. This role will be focused on Residential Service, playing a critical role in responding to electrical service and repair calls. This will include the most complex of jobs. You will: ???? Diagnose and resolve issues, while building strong relationships with our customers. ???? Identify potential problems to prevent premature and unexpected breakdowns/callbacks. ???? Explain multiple options to the client, keeping them updated with each service performed. ???? Educate and assist customers in choosing the best options (quality and financial value) and servicing agreements. ???? Understand your service metrics and hold yourself accountable for exceeding revenue goals. We Are An Equal Opportunity Employer Service Professionals is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Service Professionals is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. Physical Demands/Working Conditions - All Trades and Warehouse Departments To perform the duties of this job, you are regularly expected to sit, stand, walk, kneel, squat, stoop hands to finger, handle controls, hear, and talk. You must be able to reach with your hands and arms, climb ladders, and work in hot/cold environments such as crawl spaces. You will regularly lift 50+ pounds. Specific vision abilities required include close vision and the ability to adjust focus. The work environment can vary depending on the season and scope of work - you will be expected to be outside throughout multiple seasons. ???? Apply now to join a remarkable team!

Senior Industrial Electrician Pay: $40.15 -42.36/hr Shift: M-F 7:30AM - 3:30 PM From a small family business to a multi-billion dollar global company, Sonoco has been changing the face of products and packaging since 1899 - all while keeping the heart of "People Build Businesses" alive. Our talented people are at the core of our growth, constantly reinventing the Sonoco wheel with brilliant solutions every year. Today we are a world leader in global packaging solutions with diversified operations in over 34 countries. We're extremely proud of our portfolio of brands, our achievements in sustainability and industrialization and the groundbreaking work accomplished by our people. Reporting directly to the Plant Engineer, the Senior Industrial Electrician is responsible for achieving a high level of reliability for plant equipment through performing tasks required to maintain equipment and minimize downtime. This individual will use their training and knowledge to perform equipment/process/system maintenance, troubleshoot equipment, make repairs and identify and implement opportunities for improvement. What you will be doing: * Must be able to pass electrical skills and safety testing to become a qualified Category 2 worker. Must be capable of performing electrical work on systems up to 480 Volts. * As the resident electronic and PLC resource, you will be responsible for: Establishing and maintaining accurate, current and secure documentation of printed logic, electronic files and supporting software. * Maintenance, system set-up and selection of supporting hardware. * Application evaluation of electronic systems and software. * Facilitate electronic and PLC training within the department. * Seek out and identify obsolete, unsupported or otherwise deficient systems. Research and identify solutions then report, prepare scope of work and cost estimates to resolve. * Actively participate in process improvement, new installation and make ready related to electronic, PLC or mechanical projects. * Will function as a maintenance technician as needed, responsible for PM duties, project work and scheduled or breakdown maintenance, when situation dictates. * Work with the site Maintenance Planner concerning inventory management of related electronic spares. We'd love to hear from you if: * You will need 3-5 years' experience within an industrial setting where your focus was heavily with electrical and PLCs * You must have Strong electronic and PLC skills, proficient knowledge of AB applications. * Proficient understanding of applicable software, program language and printed logic. * Programming, capable of writing, re-writing and creating new operating programs. * Understanding of current applications and systems, mechanical and electrical. * Proficient computer skills, word processing and software understanding. At Sonoco Products Company, we offer a comprehensive total rewards package, including competitive pay and benefits. *Benefits listed below are for employees located in the U.S. Specific benefits and wellbeing programs may vary depending on your location (within the U.S. or global), or if you are a union employee. Benefits * Medical, dental, and vision coverage for you and your dependents, including FSA and HSA options * 401(k) retirement plan with company match * Wellbeing tools and resources to support holistic health, including an Employee Assistance Program with a variety of services * Paid time off and holidays to recreate, rejuvenate and care for the health of yourself and family * Variety of company paid and voluntary employee-paid insurance plans including life, personal accident, and disability insurance * Tuition reimbursement We are an equal opportunity employer, and we strictly prohibit and do not tolerate discrimination against employees, applicants or any other covered persons because of race, color, religion, national origin or ancestry, sex, pregnancy, sexual orientation, marital status, gender identity or expression, age, disability, genetic information, veteran status, or any legally protected characteristic.

Job Description We are hiring immediately for a full time MAINTENANCE ELECTRICIAN position. Note: online applications accepted only. Schedule: Full time; Monday through Friday, hours may vary. Occasional Saturdays required. More details upon interview. Requirement: Certified Electrician with high voltage experience and familiarity with CMMS is required. Pay Range: $30.00 per hour to $43.00 per hour. ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI). We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1470767. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: *************************** Skg Rooted in hospitality, ESFM elevates the workplace experience as the single source of innovative FM solutions that ensure a safe, healthy, and sustainable environment. ESFM's clients include many household names from Life Science, Technology, Oil & Gas and Manufacturing markets. ESFM self-performs 80% of all IFM solutions provided to clients. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA). Job Summary Summary: Operates and maintains all equipment, guided by a general knowledge of building trades, carpentry, painting, minor electrical, plumbing, mechanical system repairs, plant maintenance and the use of tools and basic maintenance supplies. Essential Duties and Responsibilities: Provides quality customer service by providing one-on-one attention to detail. Responds to dispatch calls for machine repairs using company vehicle. Calls on existing customers to determine adequacy of service; listens to and resolves service complaints. Inspects and listens to machines to identify causes of malfunctions; dismantles machines to gain access to problem area. Performs a variety of duties in maintaining, repairing, operating and renovating plant and facilities. Inspects parts to detect wear, misalignment or other problems; removes and replaces worn or defective parts; repairs broken parts; realigns and adjusts components; tests machine operation following repair. Reads blueprints and diagrams, determines materials needed, estimates time and material costs on installations and requests supplies to assure timely and adequate availability. Installs, tests and repairs electrical fixtures, power distribution circuits, utility equipment, internal communication and alarm systems and elements of heating and medical equipment. Diagnoses and corrects trouble on electrical installations; recommends emergency courses of action to keep vital electrical equipment operational. Recommends appropriate sources of electrical power for new installations or renovation projects. Works on power lines, including 120 to 480 volts and on transformers, switch gears, cubicles, etc. Performs corrective maintenance in accordance with the work order system. Installs/repairs high and low-voltage electrical equipment including transformers, panels, feeders, motors, switches, fire alarms, intercoms, computers and other equipment in a timely manner. Maintains clean and safe work environment; performs job safely. Exhibits professionalism with customers, fellow employees and others. Performs other duties as assigned. Qualifications: Valid Non-CDL Class C driver's license. Valid current state/local electrical license. Two years of trade school or related experience. Two years of experience as an electrician in a similar-sized institution in an engineering or maintenance occupation. Working knowledge of local, state and the National Electric Code (NEC). Associates at ESFM are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice and facility management industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. ESFM maintains a drug-free workplace. ESFM

Esposito Construction is seeking a skilled and experienced Electrician to work with a crew in performing electrical work for commercial and residential site utility projects. The ideal candidate will be responsible for installing, maintaining, and repairing electrical systems while ensuring compliance with all safety regulations and project specifications. Benefits: Medical Insurance paid by company for single rate. 401(k) eligibility with company contribution. Dental insurance eligibility. Vision insurance eligibility. Paid time off. Pay: Flexible, experience based Key Responsibilities: Work with a small crew of electricians and apprentices to complete electrical work efficiently. Read and interpret site plans, blueprints, and electrical schematics to execute wiring and conduit installations. Install, troubleshoot, and repair electrical components, systems, and fixtures in commercial and site residential settings. Run wire through conduit, ensuring proper placement and secure connections. Coordinate with project managers, site supervisors, and other trades to ensure timely completion of work. Perform electrical inspections and testing to verify code compliance and system integrity. Enforce and adhere to all company and OSHA safety regulations, ensuring a safe work environment. Order materials and ensure proper inventory of tools and supplies for the crew. Train and mentor crew members, ensuring proper workmanship and adherence to industry standards. Qualifications: Experience: Minimum 5+ years of electrical experience Skills: Strong knowledge of NEC codes, conduit bending, wire pulling, and troubleshooting electrical systems. Physical Requirements: Ability to lift 50+ lbs, work in various weather conditions, and operate hand and power tools. Other: Strong leadership, communication, and organizational skills. Ability to work independently and as part of a team. Esposito Construction is an Equal Opportunity-Affirmative Action Employer Minority / Female / Disability / Veteran / Gender Identity / Sexual Orientation / Age

Full-time Description Come join the best heating service company in the NYC area! Controlled Combustion is a diverse and stable 40-year-old full service commercial heating company comprised of over 150 employees is looking to add a experienced Commercial Electrician to its current team. As member of our team, you will work daily under the guidance of our in-house Master Electrician and side by side with one of our Experienced Electricians to perform various electrical tasks to help maintain the 2500 buildings we manage for our clients. Benefits: Good Salary - Negotiable based on prior experience. Health Benefits (including Dental and Vision) 401k Retirement Plan and Profit-Sharing Plan (eligibility requirements) Room for Growth Work Van Provided Weekends, Overtime, and Holiday Work Available Schedule: Day shift Monday to Friday Weekends as needed Education: High school or equivalent (Preferred) Experience: Electrical: 5 years (Preferred) Work Location: In person Requirements Minimum Education/Experience: At least 5-year experience in the Electrical Field (with commercial boiler controls/wiring is a plus but not required) OSHA Training Must have a Valid Driver's License Candidates should have the following skills: Strong Written and Verbal Communication Possess working knowledge of: Electrical Installations Electrical Maintenance Electrical Diagnostics/Troubleshooting Electrical Repair Bending Piping/Electrical Conduit Construction Power Tools, Hand Tools, and Testing Equipment Salary Description $35 to $40

Industrial Electrician with Automation Experience Schedule: 5:00 am - 3:00 pm. Salary Range: $35.00- $50.00 an hour. Industry Leading Benefits: Medical, Prescription, Dental, Vision, 401K, Pension, Short and Long Term Disability, Life Insurance, Tuition Reimbursement, Overtime as needed. At Silvi Materials, the Industrial Electrician leads tasks related to the electrical installation, maintenance, and repair of panels and electrical machinery. They demonstrate initiative, responsibility, have good interpersonal skills, and are adaptive to a fast-paced and fluid business environment. We encourage Industrial Electricians to participate in company-paid, continuing education to stay abreast of both the technical knowledge related to their profession and the changes related to safety compliance. Toward that end, we offer on-the-job training, formal coursework for certifications, and tuition reimbursement Silvi Materials has been expanding our “A” Team of employees since 1947! Our team has grown to 15+ companies employing over 850 employees at 30+ locations across Southeastern Pennsylvania, New Jersey, and North Carolina. Silvi is large enough to provide the stability you need, but small enough that you can feel your individual contribution to our success. We value the fresh ideas and perspectives of each new member of our team. What does Silvi Materials offer you, you may ask? Phenomenal Benefits: Medical, Vision, Dental, Prescription, Vacation, Paid Holidays, and so much more! Your future in mind: With 401(k) (at select locations) and/or pension options. We want all employees to build a great retirement! Growth at Silvi Materials: We offer each employee the opportunity to move into any facet of our complex business. And our tuition reimbursement program is the perfect springboard to help you get there! So what does a Silvi Materials Industrial Electrician do? Field Installation/Knowledge of power and control wiring Maintenance of related electrical parts, equipment, and machinery including electric motors, network switches, AC/DC systems, PLC's and Timer Relays Working with 4-20MA Controls, 120V, 240V and 480V Power Capable of threading/bending 2” rigid pipe Capable of installing and terminating conduit wire, cable, equipment, panels, sensors, and various control components and devices Capable of installing, troubleshooting, repairing and maintaining electrical control circuits for motors and control devices for various electrical devices Comfortable working independently as well as in a crew Capable of determining materials needed to complete task Long term problem solving of repeat concerns and production interference Repair of high voltage boxes Work assignments carried out in accordance with the National Electrical Code (NEC) Qualifications Required as a Silvi Materials Industrial Electrician: Minimum of 3 year's experience required as an Electrician or related field 5 year's experience or more preferred as an Electrician or related field Completion of a technical school in an electrical technology career school or program highly preferred Valid Driver's License Ability to read and interpret maintenance manual using diagram schematics and parts manuals. POE camera experience highly preferred Knowledge and experience with safety regulations (i.e. OSHA, MSHA) are a plus, but not required. Ability to work independently and with urgency to complete assignments. Ability to work outdoors, in all weather conditions. Physical Demands In a typical work setting, people in this job: Lift 50 pounds regularly and up to 100 pounds on occasion. Use one or two hands to grasp, move, or assemble objects Stand for long periods of time. Kneel, stoop, crouch, bend, stretch, twist or crawl. Hear sounds and recognize the difference between them. See details of objects that are less than a few feet away. See differences between colors, shades, and brightness. Silvi Materials does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factor.

Sunkeeper Solar designs and installs solar photovoltaics, cogeneration, and battery energy storage in standalone and hybrid configurations to offset fossil fuel consumption, provide off-grid resiliency, and equip buildings to partake in the clean energy transition. Comprised of an experienced team of installers, electrical workers, engineers, and technicians, with a deep understanding of the New York City clean-energy and construction landscapes, Sunkeeper Solar is an ideal partner for any and all distributed generation projects in the NYC Metro area. Solar Electrician: Responsibilities Install electrical service equipment, wiring, and devices required for commercial solar PV and ESS systems. Ensure electrical systems meet company standard job specifications, the National Electrical Code, and other relevant local codes. Lead job safety, participate in Job Hazard Analysis, ensure proper PPE is maintained at all times Assist in solar crew support including staging materials, general site work support, as well as site preparation and clean up Maintain proper organization of company-provided tools and materials, ensuring that essential supplies remain in stock. Communicate professionally and treat clients, contractors, tradespeople, coworkers, and the public with respect and kindness. Troubleshoot electrical issues independently Operate various tools such a threader, core drill, conduit bender Read and understand all Sunkeeper drawings with the ability to accurately translate such documents into physical space Understand and teach all company policies, including company safety policy to crew Turn in receipts on time with proper notes Mark layouts neutrally for electrical equipment, plan and execute complex conduit runs, and lead wire pulls effectively. Utilize Procore for managing daily photos, RFIs, punch lists, drawings, and inspections, while providing regular job status updates and completing necessary paperwork. Perform quality inspections on electrical equipment Participate in electrical shutdown work during off hours if needed Utilizes good judgment in gray area situations Drive company vehicles and trucks when needed Maintain a clean driving record, if assigned driving duties Maintain a valid 40-hour SST Card pursuant to Local Law 196 Maintain a Labor Utilization Rate of >89%. Actively bring new ideas about improving corporate quality, efficiency, and safety, to the persons best-positioned to implement them Reporting: Solar Electrician will report directly to the Solar Lead Electrician. Requirements: Minimum 5 years of relevant electrical experience on commercial jobsites Ability to travel to job sites within the NYC metropolitan area. Able to read electrical and architectural plans Must be able to work outdoors in various weather conditions (hot and cold), repeatedly lift 50 lbs, climb ladders, and use standard hand tools. Ability to follow verbal and auditory instructions during on-site work; must be able to meet all physical job requirements with or without reasonable accommodation. Solar installation experience is preferred but not required. Strong knowledge of the National Electrical Code (NEC) is required. Ability to comprehend and execute the installation of electrical service equipment, including transformers, meter banks, and fuse switches. Be skilled in critical path analysis for project planning and execution. Capable of designing and explaining a fall rescue plan. Ability to specify and implement a fall protection system. Familiarity with cost-benefit analysis for project efficiency. Proven ability to retain personnel on the crew. Strong communication skills to coordinate effectively with project managers, clients, other trades, and Sunkeeper installers. Must maintain a positive and professional attitude at all times Compensation: $28 - 35 / hour; commensurate with experience.

Job Description We are seeking a skilled and reliable Commercial Electrician with experience in commercial low voltage systems, including access control, video surveillance, and general low voltage electrical work. This position requires expertise in installing, maintaining, troubleshooting, and repairing hardware for security systems, as well as proficiency in low voltage wiring and electrical components in commercial and industrial environments. The ideal candidate will have hands-on experience with both security system hardware and electrical systems, ensuring seamless operation across various technologies. Primary Responsibilities: Security Systems & Hardware Installation Install, maintain, and repair access control systems, including readers, controllers, electronic locks, sensors, relays, and request-to-exit devices. Install and configure video surveillance systems, including cameras, mounts, NVRs, and related equipment. Integrate access control systems with video surveillance systems to ensure seamless operation. Electrical & Low Voltage Systems Work with low-voltage power wiring, security systems, and other commercial electrical installations. Perform low-voltage cabling, termination, and testing. Troubleshoot and resolve electrical issues, including power supplies, network devices, and connectivity. Ensure all installations meet safety standards and electrical codes. Conduct site surveys to assess installation conditions and ensure successful system integration. System Integration & Support Collaborate with software technicians to ensure hardware and software compatibility. Troubleshoot and repair video surveillance and access control hardware, ensuring proper alignment, focus, and integration. Work on both commercial electrical work and low voltage security systems as required. Additional Responsibilities Provide troubleshooting, repair, and maintenance services for both electrical and security hardware systems. Ensure compliance with all safety regulations, standards, and industry best practices. Qualifications: Proven experience with low-voltage systems, including access control and video surveillance applications. Experience with electrical systems. Familiarity with commercial electrical work and low voltage systems (e.g., security systems, data cabling). Strong problem-solving, troubleshooting, and communication skills. Ability to read blueprints, technical diagrams, and electrical schematics. Comfortable working independently or as part of a team. Strong customer service skills and ability to communicate effectively with clients on-site. Willingness to travel to client sites as needed. Requirements Legally eligible to work in the U.S. Able to pass background investigation and drug screening. Willing to obtain a COVID-19 vaccination (site-specific requirement). Benefits Competitive Pay: Hourly rates based on experience. Medical Benefits: Comprehensive health insurance options. 401k Plan: Retirement savings with company matching. Paid Time Off (PTO): Vacation and holidays. Training & Development: Opportunities for product certifications, including: Genetec Lenel Milestone Bosch Honeywell

We are seeking a skilled and reliable Commercial Electrician with experience in commercial low voltage systems, including access control, video surveillance, and general low voltage electrical work. This position requires expertise in installing, maintaining, troubleshooting, and repairing hardware for security systems, as well as proficiency in low voltage wiring and electrical components in commercial and industrial environments. The ideal candidate will have hands-on experience with both security system hardware and electrical systems, ensuring seamless operation across various technologies. Primary Responsibilities: Security Systems & Hardware Installation Install, maintain, and repair access control systems, including readers, controllers, electronic locks, sensors, relays, and request-to-exit devices. Install and configure video surveillance systems, including cameras, mounts, NVRs, and related equipment. Integrate access control systems with video surveillance systems to ensure seamless operation. Electrical & Low Voltage Systems Work with low-voltage power wiring, security systems, and other commercial electrical installations. Perform low-voltage cabling, termination, and testing. Troubleshoot and resolve electrical issues, including power supplies, network devices, and connectivity. Ensure all installations meet safety standards and electrical codes. Conduct site surveys to assess installation conditions and ensure successful system integration. System Integration & Support Collaborate with software technicians to ensure hardware and software compatibility. Troubleshoot and repair video surveillance and access control hardware, ensuring proper alignment, focus, and integration. Work on both commercial electrical work and low voltage security systems as required. Additional Responsibilities Provide troubleshooting, repair, and maintenance services for both electrical and security hardware systems. Ensure compliance with all safety regulations, standards, and industry best practices. Qualifications: Proven experience with low-voltage systems, including access control and video surveillance applications. Experience with electrical systems. Familiarity with commercial electrical work and low voltage systems (e.g., security systems, data cabling). Strong problem-solving, troubleshooting, and communication skills. Ability to read blueprints, technical diagrams, and electrical schematics. Comfortable working independently or as part of a team. Strong customer service skills and ability to communicate effectively with clients on-site. Willingness to travel to client sites as needed. Requirements Legally eligible to work in the U.S. Able to pass background investigation and drug screening. Willing to obtain a COVID-19 vaccination (site-specific requirement). Benefits Competitive Pay: Hourly rates based on experience. Medical Benefits: Comprehensive health insurance options. 401k Plan: Retirement savings with company matching. Paid Time Off (PTO): Vacation and holidays. Training & Development: Opportunities for product certifications, including: Genetec Lenel Milestone Bosch Honeywell

To thrive in this role, you must have an impeccable safety record, and you must be reliable and show initiative. You show up every day eager to dive in and address issues you see, without being told. You are responsible for keeping the line moving safely and you take a lot of pride in that. Here's what you can expect on a typical day as a Maintenance Electrician on our team at Mauser Packaging Solutions: Safety: Safety is our number one priority. You'll learn our plant safety guidelines and pass all required safety training including lockout/tagout, arc flash, forklift certification, housekeeping, and 5S standards. Quality: We take pride in our output, and you take pride in ensuring our equipment is running smoothly and safely. High-Speed, Loud Environment: We manufacture plastic pails through injection and blow molding machining. It's fast and can be loud. Some areas of the plant get very warm in the summer. Hard work: Each day you'll be bending, lifting, stooping, and like to repair equipment. You will replace sensors, contacts, or other defective parts. You'll work with PLC equipment, multiple small tools, and high-voltage equipment. You are responsible for keeping your equipment in safe, usable condition and your area safe and tidy at all times. Supportive Team: Everybody plays an integral part in this work-family as we strive to reach all our goals and deliver an excellent product. Excellent Benefits: We offer an excellent benefits package including a retirement plan. We know you work hard, and we want to take care of you and your family. Requirements: High school diploma or equivalent required Read and understand pneumatic, hydraulic, electric and electronic documentation and drawings and interpret equipment data Experience and demonstrated knowledge of troubleshooting skills, preferably in PLC motor controls and electrical equipment Perform PLC programming & diagnostics on various systems and troubleshoot electrical equipment such as relays, contactors, overloads, timers, photodetection & proximity switches or light curtains Strong understanding of Allen Bradley Control Systems, RS Logic 5000 & Seimens S7 preferred Experience with Fanuc and Toshiba a plus Strong problem-solving skills Computer skills in Microsoft Word, Excel, PowerPoint and Outlook a plus Good verbal and written communication skills Good mathematical and organizational skills Good interpersonal skills Must be able to work multiple shifts and or overtime

Our manufacturing site in Ridgefield, New Jersey, is an integral part of our sterile fill-finish manufacturing network. The site, bolstered by a dedicated team of Pharma Services colleagues, enables our customers to deliver life-changing medicines to patients around the world. The Ridgefield site exemplifies our commitment to quality, patient-safety and innovation in the pharmaceutical industry, making a significant impact on global health. Discover Impactful Work: As Maintenance Electrician you collaborate closely with the maintenance, engineering, and production teams to ensure electrical systems operate safely and efficiently to support production operation. You will be responsible for the installing, maintaining, troubleshooting, and repairing of electrical systems and equipment in a pharmaceutical manufacturing facility. Education High School diploma or GED equivalent. Basic Qualifications Two (or more) years of experience working in a maintenance capacity in a pharmaceutical or industrial manufacturing environment or other regulated environment. Must have a valid driver's license Preferred Qualifications 2+ years working with mechanical, electrical, automated packaging, and aseptic fill equipment, including syringe and high-speed vial filling systems. Strong knowledge of pumps, motors, gearboxes, drives, VFDs, servo motors, and Allen Bradley PLCs. Able to read electrical drawings, schematics, and P&IDs. Proficient in Microsoft Word, Excel, Outlook; familiar with Infor EAM CMMS, E-Beam, PLCs, and calibration processes. Aseptic gown qualified. Strong adherence to LOTO, PPE, confined space, work-at-height, and electrical safety protocols. Knowledge of OSHA, NEC, and local codes. Must be able to wear full safety gear. Must be able to work independently and collaboratively, clearly communicate issues and resolutions across shifts. This is a shift role with after-hours, weekend, and holiday call-in availability. Must be able to lift 50 lbs, climb stairs, and work safely on ladders using PPE. Benefits: We offer competitive remuneration, annual incentive plan bonus, healthcare, and a range of employee benefits. Thermo Fisher Scientific offers employment with an innovative, forward-thinking organization, and outstanding career and development prospects. We offer an exciting company culture that stands for integrity, intensity, involvement, and innovation! Compensation and Benefits The hourly pay range estimated for this position based in New Jersey is $26.18-$39.27. This position may also be eligible to receive a variable annual bonus based on company, team, and/or individual performance results in accordance with company policy. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes: A choice of national medical and dental plans, and a national vision plan, including health incentive programs Employee assistance and family support programs, including commuter benefits and tuition reimbursement At least 120 hours paid time off (PTO), 10 paid holidays annually, paid parental leave (3 weeks for bonding and 8 weeks for caregiver leave), accident and life insurance, and short- and long-term disability in accordance with company policy Retirement and savings programs, such as our competitive 401(k) U.S. retirement savings plan Employees' Stock Purchase Plan (ESPP) offers eligible colleagues the opportunity to purchase company stock at a discount For more information on our benefits, please visit: *****************************************************

Schedule: 6:30 AM - 7:00 PM (2-2-3 rotating schedule) Pay: $34-$36 per hour (starting rate to commensurate with experience) About SunnyD: SunnyD is an orange drink with a unique, boldly original taste that's unmatched. From our classic Tangy Original to our variety of other flavor blends, each has a one-of-a-kind flavor for a one-of-a-kind you! Why Join Us? Medical, dental, and vision coverage Employer-paid life insurance 401(k) with company match (starting Day 1!) 11 paid company holidays Safety shoe and prescription safety glasses reimbursement Employee discounts (LifeMart, Staples, Skechers & more) Employee Assistance Program A free case of SunnyD to take home! Position Overview: We are seeking a skilled and motivated Industrial Electrician to support our plant operations. This role is responsible for maintaining and troubleshooting electrical systems, instrumentation, and controls across high-speed bottling and packaging equipment. Key Responsibilities: Install, maintain, and troubleshoot 480VAC to 24VDC electrical systems and motor control centers Troubleshoot and repair process and packaging equipment (fillers, conveyors, packers, palletizers, etc.) Work with PLCs, HMIs, VFDs, and servo drives to maintain electronic control systems Calibrate, inspect, and troubleshoot flow, pressure, level, and temperature instrumentation Lead and train other E&I technicians as needed Create worker orders in our maintenance system Troubleshoot, photo eyes and proximity sensors Perform other duties as assigned Required Skills & Qualifications: 1+ years of hands-on experience as an industrial electrician 1-2 years in a high-speed production environment (food/beverage or bottling preferred) Formal E&I training from vocational school, military, or certification program preferred Understanding of 480VAC power distribution systems and NEC code Skilled in using electrical tools (megger, amp/volt meters, conduit benders, etc.) Solid troubleshooting skills across electrical, mechanical, and instrumentation systems Experience with PLCs and industrial controls (Allen-Bradley, ControlLogix, SLC-500, DeviceNet, Ethernet/IP) (preferred) Familiarity with VFDs and servo systems (PowerFlex, SEW, Pacific Scientific, Rockwell) Knowledge of vision systems and online coding/printing systems a plus Physical Requirements: The role requires the ability to: Stand on hard surfaces such as concrete for extended periods, up to 12 hours per shift Lift and carry materials weighing up to 60 pounds Climb stairs, ladders, platforms, and other structures on equipment or buildings to inspect, operate, maintain, or troubleshoot Bend at the knees, twist the back, and kneel as needed to access equipment for operation, maintenance, or troubleshooting Work indoors and outdoors in varying seasonal temperatures and humidity levels Function effectively in areas of high noise while using proper personal protective equipment (PPE) Sunny Delight Beverages Company is an Equal Opportunity Employer. All applicants must be authorized to work in the US. Sunny Delight Beverages Company does not offer practical training positions nor sponsor foreign citizens to obtain work visa or permanent residency.

Job DescriptionBenefits: Competitive salary Paid time off Training & development We are looking for a dependable Electrician/Mechanic to join our team. The work location will be throughout the 5 boroughs of NYC. Driving company work van(s) to and from work location(s) will be required. In this role, you will be responsible for the installation, repair, and maintenance of electrical systems in residential properties and commercial businesses. You will be required install or repair a wide range of equipment, including service equipment, panels, circuit breakers, switches, outlets, light fixtures, fans, wires, conduit and cables. As well as troubleshooting to identify and resolve electrical issues. If you're interested in becoming part of our fast growing team, please send us your resume detailing your relevant experience and qualifications. Duties and Responsibilities Installing, maintaining, repairing, and replacing electrical wiring, lighting, and other components of the electrical system in homes or commercial buildings, including switches, outlets and light fixtures. Installing electrical wiring and equipment in homes or businesses for power and lighting circuits. Installing and replacing main services including service switches, meter sockets, end boxes and circuit breaker panels. Installing electrical systems in remodeling and new construction projects, including temporary lighting and power, rough-in and trim-out. Pulling and terminating cables. Installing conduit and pulling wires. Working with GCs and others trades to plan electrical layouts for remodeling and new construction projects. Ensure that work is in compliance with NYC Electrical Code, National Electrical Codes (NEC) and Utility Requirements. Inspecting electrical systems to ensure they are safe and meet electrical codes and regulations. Use a variety of tools and equipment to complete projects, including hand and power tools such as drills, screwdrivers, linemens pliers etc. Installing low-voltage (LV) systems as required. e.g. LV lighting, doorbell/intercom wiring, boiler wiring etc. Installing home automation systems, such as those that control lighting, climate control, security systems, and entertainment systems. Read and interpret blueprints, technical diagrams, and schematics to determine the best course of action. Test electrical systems and components to identify issues. Troubleshoot electrical problems and make necessary repairs. Assist other electricians as needed. Assign duties and responsibilities to Electrician Helpers. Adhere to all safety standards and procedures. Maintain a clean and organized work area. Provide excellent customer service and build positive relationships with clients. Required Requirements and Qualifications High school diploma or equivalent. 6+ years experience or completion of an apprenticeship program. 5+ years experience and completion of an electrical trade school. Must be able to complete installations on your own, if required. Valid drivers license required. No exceptions. Driving company work van(s) to and from work location(s) will be required. Understanding of the National Electrical Code (NEC) and NYC Electrical Code required. Ability to read and interpret blueprints and technical diagrams. Strong problem-solving skills. Excellent customer service skills. A practical examination will be part of the interview process. Successful completion of the practical examination required before hire. Electrical knowledge: Need to have a strong understanding of electrical systems and how they work. Need to know how to read electrical schematics, understand electrical code and be able to identify electrical hazards. This knowledge is necessary to ensure the safety of the people you work with and the people living in the homes you work on. Communication skills: Verbal and written communication skills required. Electricians work with other professionals, such as architects, engineers and contractors. Communication skills will help you collaborate with these professionals, explain your work to homeowners and relay job conditions back to the office. Salary The current starting salary is $35.00 per hour. Salary range is $35.00 to $40.00. This rate is subject to change.

Kiely Family of Companies is an Equal Opportunity Employer (Minorities/Females/Disabled/Veterans). To read more about this, view the EEO is the Law poster and this EEO is the Law Poster Supplement Join us in designing and building our way to a better future! Scroll down to the bottom of this page to Apply today! Start Over with Job Search Returning Applicant? Login Now Electrician, Residential Job Code:2025-SHOPFLD-20 FT/PT Status:Regular Full Time Location:Long Branch, NJ Company:Sodon Electric Description: Description: Over the past six decades, we've built Kiely Family of Companies to focus on customer success and design-build capabilities. We rely on a culture of teamwork, technological innovation and high ethical standards to deliver successful solutions to our customers. Kiely Family of Companies, established in 1952 by John F. Kiely Sr., contributes to something far greater than itself, as each company's unique capabilities enhance the others, making us greater than the sum of our parts. ENR 500 and 600 ranked for engineering and construction, KIELY serves the needs of our customers, offering a diversified list of services, such as full-service engineering, utility construction, heavy highway, hot mix asphalt production, equipment sales and leasing, recycling services, and residential and commercial building, leasing, and maintenance. Kiely serves a purpose much larger than any individual, project, or entity. We refer to our employees as team members because together we empower, partner, and advance. Our team members are an elite group of behind-the-scenes professionals who embody Kiely's core values. POSITION SUMMARY: The Residential Electrician will be responsible for maintaining electrical systems in residential and small commercial buildings for our customers. Essential Functions: Reasonable accommodation may be made to enable individuals with disabilities to perform the essentials functions. * Understand and apply blueprints and technical diagrams. * Diagnose and repair electrical problems, replace faulty wiring or components, and maintain existing electrical systems. * Conduct inspections to identify potential problems and prevent future breakdowns. * Maintain accurate records of work performed and materials used. * Inspect and maintain electrical systems in homes and businesses * Interpret blueprints and technical drawings to plan and execute electrical installations and repairs. * Ensure compliance with the National Electrical Code (NEC) and local building codes. Competencies: * Minimum of 3 years in residential electrical work * Strong work ethic, integrity, and ability to work independently or as part of a team * Strong knowledge of electrical systems, wiring methods, and installation techniques. * Ability to use power tools and equipment effectively * Ability to read and understand schematics and technical documentation Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or listen. The employee is frequently required to stand, walk, use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit, climb, balance, stoop, kneel, crouch, or crawl, and may also be required to work at various heights. The employee must frequently lift and move up to 10 pounds and occasionally lift and move objects up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Travel: This position may have light travel requirements. Required Education and Experience: * High school diploma or equivalent required * 3+ years of experience in utility construction and work zone safety * Must have strong experience and knowledge in the installation of underground utilities, including gas, water, electric, and sewer Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Benefits and Compensation: Position offers competitive pay, benefits, paid vacation, and health/dental insurance. Full-time: $29.08 -$32.12 per hour, based on experience and qualifications. Equal Opportunity Employer, M/F/D/V Kiely Family of Companies is a growing and dynamic company actively seeking applications and resumes from exceptional candidates. Whether you come equipped with years of experience in the underground utility field-or you're ready to work hard and get there-we want to hear from you. * * *

Ocean Coast Electric LLC New Jersey 401K, Medical, Dental, Vision Sponsored apprenticeship program Tuition assistance Full-Time Ocean Coast Electric is seeking responsible, dedicated, and reliable electricians of all levels to bring their talents, expertise, and opinions to our staff. About Ocean Coast Electric LLC: Ocean Coast Electric is one of the top 5 electrical contractors for commercial and industrial projects. We specialize in turnkey design build warehouses and office fit outs. Ocean Coast prides themselves on having a friendly, team oriented, and encouraging staff. There is exponential room for growth when you join our team! Responsibilities: - High Quality new installations of conduit, cable tray, wiring and equipment. - Efficient and safe service and repair of existing electrical equipment. - Neat appearance. - Good customer manner. - Able to work independently and with a team. - Priority on safety. - Managing with great leadership skills. Preferred: - OSHA 10. - Bucket truck experience. - Boom lift and scissor lift certifications. Qualifications: - Must have a minimum of 5 years practical electrical field experience - Knowledgeable of NEC codes and industry standards - Trained, skilled and resourceful - Able to use tools and equipment - Strong problem solving and critical thinking skills - Strong understanding of electrical installation means and methods - Valid drivers license - Team player - Excavator Job Type: Full-time Benefits: 401(k) Dental insurance Flexible spending account Health insurance Paid time off Tuition reimbursement Vision insurance Compensation Package: Hourly pay Overtime pay Schedule: 8 hour shift Monday to Friday Education: High school or equivalent (Preferred) Experience: Electrical Experience: 5 years (Required) License/Certification: Electrical License (Preferred) Driver's License (Required) Ability to Relocate: Burlington, NJ 08016: Relocate before starting work (Preferred) Work Location: In person

Company Overview: Established in California in 2013, Green Water and Power has rapidly grown to operate in over 25 states, positioning itself as a leader in the sustainable energy sector. Named the #1 electric vehicle (EV) installer in America, we take pride in having deployed more than 10,000 EV chargers and completed approximately 5 megawatts (MW) of solar energy projects. As an EVITP (Electric Vehicle Infrastructure Training Program) certified turnkey engineering, procurement, and construction (EPC) firm, we leverage our in-house expertise to efficiently manage and execute large-scale projects. Our dedication to sustainability and quality extends beyond project completion; we also provide comprehensive operation and maintenance services to ensure optimal performance for the projects we develop, as well as for third-party installations. Position Overview: Green Water and Power is seeking a skilled Senior Level EV Installer to join our team. In this role, you will be responsible for the installation of commercial electric vehicle (EV) charging stations under the guidance of a certified electrician. This position offers a solid opportunity for those passionate about sustainable energy and looking to advance their career towards becoming a certified electrician or construction manager. Travel Requirements: Must be willing to travel to New York and Chicago, IL Responsibilities: Execute the installation of commercial electric vehicle (EV) charging stations under the guidance of certified electricians. Perform electrical wiring for EV charger systems, including both AC and DC. Install and bend conduit, pull wires, mount chargers, and program EV charging stations. Handle the mechanical and structural mounting of EV chargers and related electrical equipment. Ensure that tools and equipment are in good working order and that the project site complies with all OSHA safety requirements. Coordinate the procurement and timely delivery of materials to the job site. Establish positive customer interactions by providing on-site contacts with updates on project status. Manage, mentor, and train junior installers to ensure they remain on task throughout the workday. Participate in company training sessions as required. Complete any other assignments and special projects as requested by management. Qualifications and General Requirements: 3+ years of hands-on experience in electrical installation, construction, or a related field. EVITP Certificate with the goal of obtaining a certified electrician license. Knowledge of the NEC, particularly Article 690, as well as local electrical codes and regulations. Proficient in electrical wiring, conductor deployment, and troubleshooting. Excellent communication skills with a strong commitment to customer service. Experience in the safe use of hand-held power tools. Must have OSHA 10 certification. High School Diploma or GED required. Valid driver's license and access to reliable transportation. Physically capable of lifting and maneuvering heavy equipment (up to 50 lbs.). Strong dedication to safety with a commitment to following safety protocols. Flexibility to operate in diverse environments (e.g., extreme temperatures, crawl spaces) and adapt to changing project demands. Willingness to travel as required. Benefits: Competitive salary based on experience (DOE), ranging from $25 - $28 per hour. Comprehensive health, dental, and vision benefits package. Retirement savings plan. Paid time off. Opportunities for professional growth and advancement within a rapidly expanding industry. Collaborative and inclusive work environment that values diversity. Paid training. Additional Information: Criminal background check, pre-employment drug screen. This position requires travel to different job sites. Overnight stays may be necessary depending on the project location. Overtime and weekend work may be necessary to meet project deadlines. The installer should be flexible with work hours and be prepared for an extended workday.

Job Description HANDS ON ELECTRICAL TECHNICIAN. CAPABLE OF TROUBLESHOOTING AND WIRING MACHINES/ PLC PROGRAMMING IS A PLUS. MUST HAVE ELECTRICAL HANDS ON EXPERIENCE. MUST BE CAPABLE OF TROUBLESHOOTING AND WIRING MACHINES General Description: Develop and maintain facilities electrical infrastructure and equipment. Able to work safely and efficiently with high voltage equipment. Responsible for troubleshooting electrical problems throughout the plant. Supply power from Breaker Panel to equipment. Perform computer program modifications to existing PLC programs. Working knowledge of hydraulics helpful. Reports to: Maintenance Eng. Both English and Spanish speaking applicants will be considered. Responsibilities: Maintain the electrical in the building and facility equipment. Read and understand electrical schematics and blueprints Troubleshoot and wiring equipment Supervisor the Maintenance team Previous Experience: Experience in A/C 120/208/470 Volts // EMT tube bend and rigid pipe Preferred Experience: Wiring electrical enclosures as per schematic given Preferred Experience: Computer programing of Allen Bradley PLC controllers Educational Qualifications: Required: High School diploma Preferred: Electrical Technology or Engineering Degree Preferred: Electrical Certifications Company training will include Company's Quality Management System ISO 9001:2015 awareness Other Skills: An ability to work well under pressure Teamwork and problem-solving skills Good verbal and written communication skills Efficiency and organization Able to speak Spanish helpful

Job DescriptionBenefits/Perks Competitive Compensation Career Advancement Opportunities We are seeking a skilled Electrician to join our team! You will be responsible for installing and repairing wiring, electrical fixtures, and control equipment, as well as training apprentices on the job. If you are a Journeyman Electrician with a can-do attitude who takes pride in his work, we want to hear from you. Responsibilities: Follow all safety rules and regulations Maintain a clean and safe work environment Use blueprints, sketches, or building plans to determine electrical requirements and materials needed Install new electrical systems and repair existing systems Provide bids for work orders Interact with customers, suppliers, and other professionals Qualifications: Journeyman Electrician License Previous experience as an Electrician is preferred Valid Drivers License Ability to stand for long periods and lift heavy objects Strong understanding of mathematical concepts and measurements Professional appearance and courteous personality