Service mechanical technician jobs near me - 1,197 jobs

Pay: 80-100k Full-time, year-round work Join ARS, the nation's largest provider of residential HVAC, plumbing, and electrical services with 7,000+ team members and over 45 years of experience. What We Offer: Weekly pay via direct deposit Paid training and onboarding Insurance available after 31 days Low-cost medical (as low as $5/week) Dental, vision, HSA/FSA 401(k) with company match 13 days PTO + 8 paid holidays Company-paid life insurance Take-home service vehicle + gas card Ongoing technical, safety, and leadership training Career growth across a national service network Responsibilities: What You'll Do: Perform residential electrical service calls, including troubleshooting and repairs Install and service home generators Install and service EV (electric vehicle) chargers Install, maintain, and repair wiring, lighting, outlets, and electrical panels Ensure work is performed in compliance with national and local electrical codes Provide excellent customer service and communicate recommended solutions Qualifications: What You'll Bring: Valid electrician license (state-specific) 2+ years of residential electrical experience preferred Strong understanding of electrical systems, safety standards, and code compliance Ability to work independently and as part of a team Strong communication and customer service skills If you have the experience we seek, APPLY NOW Note: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

Territory: Columbus, OH and surrounding areas - Daily Travel & occassional overnight/weekend work An established organization supporting the construction and materials industry is seeking a Field Service Technician to support customers through on-site equipment installation, service, and technical support. This is a remote, field-based position with frequent local and regional travel. Training, tools, and a company vehicle are provided. Key Responsibilities Install, maintain, and service customer equipment at job sites Troubleshoot and repair mechanical, electrical, and pneumatic systems Support customers with basic equipment operation and maintenance Maintain inventory of parts, tools, and service materials Document service activities and communicate with internal teams Provide a high level of customer service in the field Qualifications Mechanical or maintenance experience demonstrating technical aptitude Basic knowledge of electrical, pneumatic, or mechanical systems Ability to lift up to 50 lbs and perform physical job-site tasks Comfortable working independently and managing a field schedule Flexible availability to support customer and business needs Valid driver's license and clean driving record Comfortable driving within the assigned territory Compensation & Benefits Competitive compensation Health insurance and retirement plan options Paid time off and paid holidays Company vehicle, tools, and equipment provided Additional Information Full on-the-job training provided Field-based role with autonomy and customer interaction Equal opportunity employer

As a Field Service Technician, you will be responsible for the proper operation and maintenance of CenTrak's hardware infrastructure, tags, and other devices at our customer sites. This is a highly visible customer facing position for a detail-oriented person who thrives in a fast-paced environment. You must be a focused individual able to work responsibly for us. This is a hands-on position that requires you to be very proactive and energetic to develop and maintain positive customer relationships. It is the responsibility of the Field Services team to keep these complex systems operating at an optimal health. Responsibilities: Perform battery replacement for CenTrak infrastructure, asset tags, environmental monitoring (EM) sensors, hand hygiene (HH) devices, etc. Perform small installations of infrastructure devices and validate via CenTrak software. Conduct troubleshooting of problematic areas in conjunction with remote support personnel Monitor equipment status and alerts via the Connect PulseTM application Ability to understand CenTrak designs with regards to device location within the hospital Submit Return Material Authorizations (RMAs) of products under warranty Maintain proper inventory of batteries and other equipment necessary for device maintenance Document daily activities, findings, and recommendations and provide to Customer Maintain rapport with customers by examining complaints, identifying solutions, and suggesting improved methods/techniques for the RTLS utilization Qualifications: Preferred: Degree in Networking/Telecommunications 2-3+ years of experience in a professional services environment supporting end-users Experience with IR, Wireless and Network Protocols a plus Experience in enterprise healthcare or hospital environments Advanced problem-solving skills coupled with a commitment to extraordinary customer service Maintain confidentiality and comply with Health Insurance Portability and Accountability Act (HIPAA) requirements Comfortable navigating all areas of the hospital system including patient rooms Comfortable occasionally working around or with potential biological hazards; proper personal protective equipment will be worn in accordance with medical center policy and procedures Demonstrate proficiency with Microsoft Office and other business applications Some area travel required between local sites (reimbursable). Must have a valid driver's license, insurance, and means of transportation Working hours are expected between 8:00 am - 5:00 pm While a standard 40-hour working week is the norm, you can expect some evening or weekend work on occasion to meet deadlines for major go-live activity Comply with required immunizations, health testing, and other vendor requirements Physical Requirements: Ability to walk/stand for an extended period, up to 8-10 hours/day Ability to kneel, climb, lift, and carry up to 30 pounds Required to climb and stand on ladders, sometimes for extended periods of time Required to work with tools while reaching above your head for extended periods of time

A leading life science company is seeking a Field Service Engineer to support advanced systems remotely from San Francisco. Responsibilities include installation, commissioning, maintenance, and customer support for high-tech equipment. The ideal candidate will have an associate degree in engineering, 2+ years of field service experience, and strong problem-solving skills. This role offers a salary range of $80,000-$105,000 with additional perks such as bonuses and a flexible work schedule. #J-18808-Ljbffr

A life sciences technology company is seeking a Field Service Engineer to provide technical support for revolutionary protein analysis equipment. The position is remote with potential travel across the Greater San Francisco Bay area and North America. Candidates should have a relevant engineering or science degree along with field service experience. The company offers competitive insurance benefits, 401k plans, and career development opportunities. #J-18808-Ljbffr

Asset Living is a third-party management firm and a proven partner in fostering thriving communities nationwide. Founded in 1986, Asset Living has decades of experience delivering exceptional value to our partners. Since the beginning, our undeniable passion has driven our organic growth from a small property management firm to one of the most trusted allies in real estate. Asset Living's growing portfolio includes a multitude of properties across the country that span the multifamily, single-family home rentals, affordable housing, build-to-rent, active adult, and student housing divisions. Asset Living is a fast-growing company made up of talented individuals from diverse backgrounds that differentiate us and help us drive innovation and results for our clients and communities across the US. At Asset Living, we wholeheartedly believe 'Together We Lead, Together We Succeed'. We empower each other to lead by example, collaborate, and evolve - inspired by our belief that we can continually improve as individuals and as an organization. Together, we create an environment where every voice is heard, every idea is valued, and every individual experiences opportunities to grow as our company grows. When you join Asset Living, you become part of a dynamic team that thrives on unity, unique talents, and a universal culture of winning. Recognized as one of the nation's Best and Brightest Places to Work and ranked in the NMHC top 50 professionals, join Asset Living because of its reputation as the most trusted partner in real estate, workplace culture, and growth opportunities. Asset Living is a member of The Institute of Real Estate Management (IREM) and is recognized as an Accredited Management Organization (AMO). Together, we lead the way, and together, we achieve excellence in all that we do. Join a workplace where success is a collective journey and leadership is a shared responsibility. MAINTENANCE TECHNICIAN The Maintenance Technician is responsible for assisting in carrying out the maintenance processes of the property, including corrective, preventative, routine, emergency, and cosmetic maintenance. The Maintenance Technician is also responsible for the make-ready process in a manner consistent with the property's operational objectives under the supervision of the Maintenance Supervisor and Community Manager. Essential Duties & Responsibilities Community Maintenance Regular/daily onsite attendance is required Respond to resident/management requests and work orders for community common areas, buildings, and units in a timely manner Ensure all repairs and replacements necessary for community common areas and units Assist with the scheduling and performance of all maintenance/repair-related turn events Assist in the daily clean up of the exterior of the community, including grounds, breezeways, and all common areas Perform swimming pool maintenance and cleaning and maintain accurate, timely chemical logs Inspect grounds, buildings, and other community features daily to daily to identify, minimize and correct hazardous property conditions or liability concerns Maintain preventative maintenance program that extends the life of the community while minimizing future repairs Responsible for understanding and following Asset key policy Maintain well-organized and properly stocked maintenance shop while adhering to safety standards and OSHA guidelines Assist the Maintenance Supervisor in maintaining the hazard communications program; teach and promote safe work practices Participate in unit inspections as requested Assist Maintenance Supervisor with monitoring inventory of equipment and supplies as requested Maintain accurate records regarding service requests, EPA/OSHA standards, preventative maintenance, apartment make-ready status, work in progress, etc. Assist with the general upkeep, maintenance, and cleaning of office, common areas, and model unit Report any observed violations of community rules and regulations to the Maintenance Supervisor and/or Community Manager Participate in on-call emergency at community Utilize property resources, equipment and supplies economically Perform additional tasks and responsibilities requested by Maintenance Supervisor and Community Manager Customer & Resident Relations Manage excellent customer service and monitor service request turnaround and responsiveness Projects a favorable image of the community to achieve property objectives and public recognition Ensure consistency in dealing with residents on all matters Enforce policies of the community that the immediate supervisor delegates Education/experience High School Diploma or Equivalent Ability to understand and perform all on-site software functions; basic computer skills required. Must have basic knowledge of Fair Housing Laws and OSHA requirements. Physical requirements While performing the duties of this job, the employee is regularly required to move about to accomplish tasks or move from one worksite to another The employee is frequently required to ascend and descend ladders, stairs, ramps, step stools, etc., move self in different positions to accomplish tasks in various environments, including tight and confined spaces, traverse flat and uneven terrain, work in an overhead position and/or reaching, adjust or move objects of 100+ lbs. in all directions, lifting and placing objects of 100+ lbs., communicate with others to exchange information, repeat motions that may include wrists, hands and/or fingers, operate machinery and power tools, operate motor vehicles and/or golf carts, assess the accuracy, neatness, and thoroughness of the work assigned, identify and inspect objects and areas, exposed to outdoor weather elements (wind, precipitation) including low and high temperatures and exposed to hazardous chemicals, and able to work overtime, weekends, night hours (on-call property emergencies). The employee occasionally remains in a stationary position, often standing or sitting for prolonged periods. License/equipment Must have reliable transportation due to the emergency on-call requirement. At Asset Living, a variety of factors are considered in making compensation decisions, including, but not limited to: skill set, background and training, certifications, etc. When selecting the top candidate to hire for a position, the offer we extend is dependent on the facts associated with each specific individual's relevant experience for the role. Our employment offer is accompanied by additional compensation associated with our comprehensive total rewards package, which includes benefits (medical, dental, vision, life, accidental, and disability insurance), 401K with employer matching, and commission and performance bonuses, when applicable. Full-time employees also receive paid sick days and company holidays. Salary Range: $18.00 per hour to $20.00 per hour This should not be considered all-inclusive. It is merely a guide of expected duties. The employee understands that the job description is neither complete nor permanent and may be modified at any time. At the request of their supervisor, an employee may be asked to perform additional duties or take on additional responsibilities without notice. PandoLogic. Category:Building Maintenance, Keywords:Apartment Maintenance Technician, Location:Westerville, OH-43082

At Bath & Body Works, everyone belongs. We are committed to creating a culture of belonging focused on delivering exceptional fragrances and experiences to our customers. We focus on recruiting, retaining, and advancing top talent. In addition, we work to improve our communities and our planet to help the world live more fully. Summary: The Maintenance Technician can perform a wide variety of work to ensure that the facilities and equipment are maintained in a safe and effective working condition. Responsibilities include, but are not limited to, performing work in all operational and Facilities areas, depending upon the immediate needs of the department. While Maintenance Technicians may have developed skills in one or more areas, all are expected to be able to perform general maintenance and repair in all areas of assignment, which may include equipment, motor and conveyor repair and maintenance as well as building maintenance including lighting, electrical and plumbing in any of the distribution centers. Responsibilities Ability to read and comprehend technical manuals, schematics and blueprints. Ability to use electrical diagnostic equipment (to include digital and analog meters, and amp meters for AC/DC testing). Ability to work as a team member by interacting and communicating with co-workers and managers in a collaborative and constructive manner. Works with Supervisor to mentor/develop team and Tech's in training. Work with Vendors aligned to facilities. Ability to multi-task. Ability to change load wheels on power equipment. Ability to troubleshoot and repair low and high voltage controls including fuses, relays, wiring. Maintains building, equipment, shop and storage areas in a clean and orderly condition. Completes work orders for work performed and includes parts and inventory used. Document all work order activities to comply with MP2 requirements, providing documented records of the activities performed. Follow lockout-tag out procedures, confined space procedures, and other safety and environmental procedures and policies as required. Experience working in maintenance in a distribution center setting. Building conveyor maintenance experience required. Qualifications Qualifications & Experience Possession of a valid driver's license and a satisfactory driving record. Prior maintenance experience with forklifts, conveyors, controls, hydraulics, pneumatics and building maintenance. Electrical experience with high and low voltage, AC and DC. Ability to lift 70 lbs Technical school or training desired. Computer skills navigating email/Microsoft Suite Knowledge of mechanical and electrical drawings. Proven track record of strong mechanical and electrical troubleshooting. Welding skill preferred, but not required. Multiple shifts and locations available. Education Possession of a high school diploma or general equivalency diploma (GED) Core Competencies Lead with Curiosity & Humility Build High Performing Teams for Today & Tomorrow Influence & Inspire with Vision & Purpose Observe, Engage & Connect Strive to Achieve Operational Excellence Deliver Business Results Benefits Bath & Body Works associates are the heart of our business. That's why we're proud to offer benefits that empower you to Dream Bigger & Live Brighter. Benefits for eligible associates include: Robust medical, pharmacy, dental and vision coverage. Plus, access to our onsite wellness center and pharmacy located at the Columbus, OH home office. 401k with company match and Associate Stock Purchase program with discount No-cost mental health and wellbeing support through our Employee Assistance Program (EAP) Opportunity for paid time off and paid parental leave. Plus, access to family and lifestyle programs including a family building benefit, childcare discounts, and home, auto and pet insurance. Tuition reimbursement and scholarship opportunities for post-secondary education programs 40% merchandise discount and gratis that encourages you to come back to your senses! Visit for more details. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. We will consider for employment all qualified applicants, including those with arrest records, conviction records, or other criminal histories, in a manner consistent with the requirements of any applicable state and local laws. Please see links: Los Angeles Fair Chance In Hiring Ordinance , Philadelphia Fair Chance Law , San Francisco Fair Chance Ordinance . We are an equal opportunity employer. We do not make employment decisions based on an individual's race, color, religion, gender, gender identity, national origin, citizenship, age, disability, sexual orientation, marital status, pregnancy, genetic information, protected veteran status or any other legally protected status, and we comply with all laws concerning nondiscriminatory employment practices. We are committed to providing reasonable accommodations for associates and job applicants with disabilities. Our management team is dedicated to ensuring fulfillment of this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, associate activities and general treatment during employment. We only hire individuals authorized for employment in the United States. Application window will close when all vacancy/vacancies are filled.

SummaryLead and mentor matrixed team with a focus on fabrication and installation work planning, technical approach, design assurance, and execution excellence on BWRX-300 project. Scope includes proposal, requirements management, design, optioneering, fabrication support, installation thru commissioning as well as stewardship of guides, tools, skills development, knowledge capture, lessons learned, best practices, issue resolution, and supplier or partner technical oversight.Job Description Essential Responsibilities Lead integrated approaches and solutions across the diverse plant disciplines or specialties of; Mechanical component design, equipment design, licensing support, procurement, testing, and providing direction for installation and operational requirements. Coordinate across matrixed Engineering teams to review, disposition, and provide vendor direction related drawing, specification, non-conformance, procedure, etc. Lead preparation of work planning, scheduling, and resource loading across Procurement, Fabrication, and Construction of components. Support project engineering or manager with; understanding execution metric and status, issues, risks, mitigation or recovery plans as well as being proactive to identify changes in scope - if customer driven, the support preparation of project change order (PCR). Drive compliance with; scope, work plan, budget, and overall schedule as well as the applicable procurement package definitions, non-conformance processes, supplier oversight practices, and tools including design and technical reviews. Lead “day-to-day” operations and follow-up to ensure deliverables are produced and commitments met on-spec., on-budget, and on-schedule. Identify, confirm, document, and lead resolution of technical risk or other emergent issues. Provide technical oversight and mentorship to ensure system designs and deliverables comply with all requirements throughout design release, procurement/fabrication, assembly, and site installation and testing. Assist with hosting learning sessions as well as knowledge capture and transfer initiatives. Champion conformance with regulations and guides, standard review plans, branch technical positions, interim staff guidance, information notices and summaries, bulletins, orders, etc. as well as applicable nuclear guidance and industry standards. Support Simplification and continuous process improvements. Champion nuclear safety culture - Ensure compliance with GEH policies, quality management system, and corrective action program. Deliver work with integrity, safety and security, quality, and then on-time output. Required Qualifications Bachelor of Science in Engineering, Physics, Chemistry, or Mathematics or equivalent 4-year technical degree. 7 years of experience in heavy industrial, thermal power, or nuclear industry working in mechanical equipment and component design, including specification of design requirements, design development, procurement, test, and fabrication/installation support. 5 years of excellent knowledge, skill, and experience with PC and desktop engineering productivity software [e.g.; Word, Excel, PowerPoint, Access, Project, Visio], various computer aided design or analysis and modelling tools as well as project collaboration tools [PLM, Documentum]. 4 years of experience with ASME codes & standards or equivalent. Eligibility Requirements Ability and willingness to travel up to 25% to domestic and international plant sites. The preferred work location for this role is at the GEH Headquarters in Wilmington, NC; but highly qualified (US based) remote candidates will be considered. This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Desired Characteristics 5 years of experience with BWR plant product family [e.g., BWR-4, -5, -6, ABWR, ESBWR] system design, plant engineering maintenance and modifications, new plant design certification and licensing. 5 years of experience performing independent, or preferably team based, equipment/component design or technical reviews including product requirements management, technical risk tracking/retirement, technical reviews, procurement and fabrication support. 5 years of experience with applicable industry standards [e.g., ASME, AWS, BWRVIP reports]. Master of Science Degree in Engineering Discipline. Experience with weldment design, structural analysis (including FEM) and fabrication. Strong oral and written communication skills, including a demonstrated ability to write organized engineering documents. Strong interpersonal and proven leadership skills. Professional Engineers License. Proficiency with Autodesk Inventor 3D CAD design. Proficiency with ANSYS FEA analysis. Experience working in or with an architect engineering (A/E) firm. Knowledgeable, skilled and experienced regulatory affairs and licensing processes [e.g.; NRC]. Competency in US nuclear laws, rules, regulations, guidance, positions, memorandum, notices, bulletins, items, etc. from NRC, DOE, or international equivalent. Clear thinker, detail oriented, insightful, quantitative, balanced, results oriented analyst and leader - Able to make reasoned, sound, and timely decisions that are phased, reasonable, and deliverables oriented. Able and willing to take ownership and responsibility for scoping, planning, scheduling, budgeting, action tracking, prioritization, monitoring, corrective actions, and results. Self-starter with energy, positive “Can-Do” attitude and inclusive style - Proven track record of delivering on commitments, producing quality deliverables on specification, on budget, and on schedule in a fast passed and matrixed environment executing multiple assignments and priorities. Strong verbal communication as well as facilitation and presentation skills for technical and business audiences - Able to communicate openly, calmly, and crisply in stressful situations with diverse community of; engineers and technicians, business leaders and project managers, auditors, regulators, and customers. Adaptive, able to quickly learn diverse and varying organizational interfaces with professional astuteness and agility [e.g.; cross-functional, across business within same company, across different companies including customer, partners, and suppliers, regulator, third party auditors]. Continuous improvement “mindset” with an ability to identify, influence, and implement better ways to do an activity or process. Working knowledge, expertise, and experience using; LEAN or Agile, define, measure, analyze, improve, and control (DMAIC), design for six sigma (DFSS), design for reliability (DFR), failure modes and effects analysis (FMEA), design to cost (DTC), and new product introduction (NPI) techniques and tools. The base pay range for this position is $112 - $160K. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for bonuses, such as a performance bonus/variable incentive compensation/equity. This position is expected to close on 10/8/2025. The company pays a geographic differential of 110%, 120%, or 130% of salary in certain areas. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling, and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401 (k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. #LI-BB1 #LI-Remote This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Additional Information GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes #LI-Remote - This is a remote position For candidates applying to a U.S. based position, the pay range for this position is between $113,200.00 and $188,800.00. The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set.Bonus eligibility: discretionary annual bonus.This posting is expected to remain open for at least seven days after it was posted on January 06, 2026.Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance, 12 paid holidays, and permissive time off.GE Vernova Inc. or its affiliates (collectively or individually, “GE Vernova”) sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.

The purpose of the Service Technician is to perform repair, calibration, conversion, field service, training, and demonstration activities at both ITH and customer/field locations. Service technicians are required to travel as scheduled for work at off site locations. Service Technicians also perform general tasks related to tool box fabrication, inventory, and provide back up support to other positions. DESCRIPTION OF DUTIES Timely, accurately, and efficiently performs the following job duties. Inspects and repairs ITH tools both in the shop and the field. Performs in-house calibration of ITH tools. Computer/Database Work Enters repair information into the computer to make service reports, including tracking of parts used from stock. Modifies and Prepares toolboxes for ITH tool kits, including painting and applying decals as needed. Booth Shipments for Exhibitions Packs and unpacks ITH booth and tools for various trade shows Responsible for keeping records of inventory used for repairs and assists with physical inventory counting. Answers phones and interacts with customers as needed to provide customer service. Travels (up to 40% of the time) to customer sites to perform training, offer demonstrations, and support the sales activity of the company. Performs product conversions according to production orders as required. The ability to: Work in a harmonious manner, accept supervision and directions, and interact in a cooperative and professional manner with supervisor, co-workers, and customers. Work in a team environment to provide good customer service. Maintain regular and predictable attendance. Maintain a professional business appearance and demeanor. Maintain safe working conditions and perform work in a safe manner. routinely hear, see, and talk to effectively communicate in person and by telephone with supervisors, co-workers, and customers; frequently and accurately work on several tasks at the same time within assigned deadlines read and understand written documents and data; Physical Requirements Must be able to lift 50 lbs unassisted Must be able to climb ladders and scaffolding Use of illegal drugs and substances is subject to termination. Travel Requirements Worker must have a valid driver's license Worker must be able to rent cars while traveling Extra benefits: 2 weeks and 1 day for vacation time. 1 week enabled after working for 3 months 2 week enabled after working for 6 months New hires are flexible (already have plans when interviewing). After the first year of work no stipulations. After 5 years = 3 weeks + 1 day. After 10 years = 4 week + 1 day. The prospective employee would receive medical coverage without employee contributions. Any copays are covered under medical expenses at the end of the year - employee is reimbursed for any copays. No dental but medical reimbursement Medical reimbursement up to 5000.00 A profit-sharing program at the end of the year. Bonus will average 4,000 to 10,000 depending on profitability (never missed in 26 years). Compensation: $18.00 - $20.00 per hour Experience the Difference with Express in Alpharetta, GA Our Express Employment Professionals Office in Alpharetta, Georgia is a locally owned and operated full-service staffing agency that offers staffing opportunities throughout the Forsyth County area. Along with that, we also work to provide workforce solutions to the top local Employers in the community. We strive to exceed expectations by pairing the staffing services we offer to companies in our community with talented Job Seekers who are the lookout for quality employment. We recruit our candidates in our community when we can, which has proven excellent turnout, consistent attendance records and high conversions from temporary to full-time employment offered to our Associates. Express Associates have a wide assortment of job opportunities in Alpharetta, Norcross, Cumming, Duluth, Sugar Creek, Buford, Johns Creek, and Suwanee, Georgia. Our team at Express Alpharetta is committed to recruiting, screening and placing only the most skilled candidates in our area. Combining our international headquarters with our local recruitment efforts, it's easy to see the value of our competitive advantage! We are proud to be the premier employment agency in Alpharetta that helps local businesses meet their staffing needs and goals.

We are looking for a skilled Mobile Service Bus Technician. This is a remote position and that will require to customer sites in the Albany area. The Mobile Service Bus Technician should be proficient with performing basic diagnostics and repairs, and preventive service procedures, including but not limited to bus specific body systems, brake systems, exhaust, limited engine/drive-train repairs, steering and suspension. Responsibilities Travel to customer site and provide various service repairs. Follow diagnostic repair plans as required by manufacturer. Meet service goals while providing superior service. Document customer repair plans in a timely manner once repairs are completed. Maintain a neat/clean appearance. Efficiently navigate a computer. QUALIFICATION REQUIREMENTS: Must be 21 years of age. Education: Minimum High School graduate or equivalent preferred. Formal diesel and/or heavy-duty vehicle training preferred. Experience: At least (2) years' experience as a mechanic in an automotive, school bus, trucking or heavy equipment environment, Diesel Mechanic or any equivalent combination of education and experience Skills: Inspecting, diagnosing, testing, and repairing buses or other vehicles and their systems. Skill at following both verbal and written instructions. Knowledge of: Use and care of hand tools, equipment, and machinery, safe work practices. License/Certification: Driver's License (Required) ASE Certifications preferred but not required. CDL preferred.

Job Description Are you ready to turn your passion for HVAC and refrigeration into a thriving career? Your opportunity awaits at JAGS Mechanical, where we're actively seeking a dynamic full-time Service Technician for both our Cincinnati, OH, and Columbus, OH branches. The Service Technician in Cincinnati will cater to Cincinnati, and the Service Technician in Columbus will focus on servicing the Columbus area. Earn between $50,000 - $120,000 per year as well as enjoy great perks and benefits like a company vehicle and quarterly bonuses based on your stellar performance. Exciting challenges, career growth, and a supportive culture await. Ready to redefine comfort and efficiency with us? If so, read on to find out more! WHAT IS JAGS MECHANICAL ALL ABOUT? At JAGS, we're more than a company; we're a community of forward-thinkers passionate about blending innovation with tradition. Our mission? Redefine industry standards by creating comfortable, efficient spaces. We value collaboration, offer growth opportunities, and pride ourselves on a culture that celebrates achievements and supports each team member's journey. Who Shouldn't Apply People who stay stagnant in their careers and aren't looking to grow. Anyone who struggles to stay in a role for at least two years. Those who think growth comes without hard work and challenges. Constant complainers who focus on problems instead of solutions. People who are content with staying the same and not improving. We're building a team of motivated, hardworking individuals who want to push themselves and grow with us. If that sounds like you, we'd love to have you on board. A DAY IN THE LIFE AS A SERVICE TECHNICIAN: Picture this: The sun is rising over the city, and you, our ingenious Service Technician, are geared up for another day of turning technical challenges into triumphs. You dive into repairing HVAC systems, seamlessly transition to tackling refrigeration issues, and cap off your day mastering the art of fixing food service equipment. Each day is an adventure, a puzzle waiting to be solved, and you're the hero making it happen. QUALIFICATIONS: No experience is needed! We invest in you, providing training and sending you to trade schools. However, experience in HVAC, refrigeration, food service equipment repair, electrical, or plumbing would be a plus! WORK SCHEDULE & LOCATION: Schedule: 8 AM - 5 PM, Monday - Friday, with rotating on-call shifts Location: Hiring for both our Cincinnati, OH, and Columbus, OH branches READY TO EMBARK ON THIS EXCITING JOURNEY? Take the first step by applying with our 3-minute, mobile-friendly initial application. It's quick, easy, and the beginning of your transformative career with JAGS Mechanical! Job Posted by ApplicantPro

**IMMEDIATELY HIRING!!! - APPLY TODAY!!!** **Starting pay for the market:** $25-32/hr **Automotive Technician - Etna, OH (Near Columbus & Pataskala)** **Ready to earn more, learn more, and work in a busy shop with steady hours?** We're hiring an experienced **Automotive Technician** for our Etna location. This is a great opportunity for techs coming from local tire shops, dealerships, or independent repair shops. \#AutomotiveJobs #AutoTech #MechanicJobs #BrakeTech #RentonJobs #SeattleJobs #BellevueJobs #AutoRepair #NowHiringWA #TechnicianJobs **Work Location:** 8951 Mink Street SW, Pataskala, OH 43062 Our shop in **Etna, OH** is easily accessible from: **Pataskala, Reynoldsburg, Newark, Hebron, Pickerington, Gahanna, and East Columbus** **Shift Information:** + **2nd Shift:** 3:00 PM - 2:00 AM + **3rd Shift:** 9:00 PM - 7:00 AM **Why Technicians Choose Us** **✓ Top pay for experienced technicians** **✓ Busy shop = guaranteed workflow & consistent hours** **✓ Paid training + career path to Master Tech** **✓ Tool support program + modern equipment** **✓ Growth opportunities within the company** **About the Role: What will you do?** + **Servicing delivery vans and DOT vehicles** for scheduled preventative maintenance at a client site + Perform line technician services such as oil changes and tire services, routine inspections/maintenance, system diagnostics, brake repairs, fluid exchanges/flushes, preventative maintenance, and tire installation + Advanced repairs and state inspections + Training for this role may take place in a customer retail environment prior to working on the client site **Basic Requirements** + 2 years of experience performing qualified DOT regulated inspections, preventative maintenance, and brake related services + Must have DOT Brake Certification, or be willing to obtain within 30 days of hire + Must have a valid driver's license and meet DOT physical requirements, including being at least 21 years of age **Preferred Qualifications:** + High School Diploma or GED preferred + ASE Certification (s) + Previous experience diagnosing vehicles and performing road tests, electrical, air conditioning, and primary and advanced fuel ignition experience **Benefits At-a Glance:** + Comprehensive benefits package: Medical, Prescription drug, Vision, Dental, Wellness Program, Life insurance, 401(k) with company matching , Paid vacation/Sick Pay and holidays, Tuition Reimbursement & Employee Discounts and Safe work environment + On-going Training and further career advancement opportunities **About Us:** **Goodyear** owns and operates more than 580 tire and auto service centers nationwide and this role would be joining our **growing fleet business** . As the bridge between Fleet owners, managers and other associates you will bring an outstanding service mindset that impacts others, ensures client satisfaction and places safety as a top priority for your team at Goodyear's Fleet Service Centers. GOODYEAR IS AN EQUAL OPPORTUNITY EMPLOYER Goodyear is an Equal Employment Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regards to that individual's race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender identity, age, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Click here for more information about Equal Opportunity laws and here for related information. See Goodyear's EEO & Affirmative Action Policy Affirmation here.

Job DescriptionBenefits: 401(k) 401(k) matching Competitive salary Dental insurance Free uniforms Health insurance Paid time off Training & development Vision insurance Hiring Immediately We are seeking a dependable, long-term Field Technician to join our team in Columbus, Ohio. This position is ideal for individuals who enjoy hands-on technical work, working in a team environment, and building strong relationships with customers across a variety of industries. On the job training is provided. The Field Technician will install, service, and troubleshoot mobile video systems, two-way radios, and other in-building technology solutions. The ideal candidate has strong mechanical aptitude, basic electrical knowledge, and a willingness to learn and grow. Candidates with military experience or backgrounds in security systems, low-voltage wiring, car audio, vehicle upfitting, or two-way radio work are encouraged to apply. Responsibilities Report to work prepared and on time, adhering to daily schedules Safely operate and maintain a company vehicle, tools, and equipment Install, troubleshoot, and service mobile video, two-way radio, and related systems Perform all work in a safe and professional manner Occasionally work at heights using ladders or lifts Meet with customers to review installation options and project details Communicate clearly with customers and coworkers regarding project status Complete work within reasonable timeframes Accurately complete service documentation Assist with inventory management Qualifications Positive, professional attitude with the ability to work independently and as part of a team Strong attention to detail and ability to follow direction Valid drivers license with a clean driving record (required) High school diploma or equivalent Mechanical aptitude with proficiency using power tools Willingness to travel within Ohio (paid drive time in a company vehicle during work hours) Pride in quality workmanship Ability and willingness to learn new equipment and techniques Ownership of basic hand tools (specialty tools provided)

Are you an experienced Lube Technician (1+ years) ready to take your career to the next level? Join our Germain Mazda Team in an Advanced Apprenticeship, where your passion and hard work allows you unlimited growth in your career. “I started at Germain at 20 years old as a young Flat-Rate Technician. Through manufacturer training and certifications, I earned my Master Level status. That growth led to the opportunity to become Shop Foreman/Diagnostic Specialist and later a step into management. Germain invested in my development at every stage and trusted me with greater responsibility as I progressed. I'm proud to still be here today, continuing the career I started years ago.” Still learning," Roccie Nastase - Service Director What We Offer: Paid factory training to advance you toward Master Certified Technician status. A tenured, professional staff and plenty of work to keep you busy where experience is valued and success is shared. Working on Mazda vehicles means joining a brand known for engineering innovation, reliability, and advanced technology. Approximately 66% of our work is routine maintenance and 34% is repair, allowing you to build confidence on quality vehicles with fewer complex diagnostics than most shops. A clear, structured career path designed to help you progress from Advanced Apprenticeship to Master Technician with continued development opportunities along the way. Team-based culture focused on learning, performance, and pride in craftsmanship. Competitive pay with growth potential as you advance your skill level. Who We're Looking For Minimum 1 year of hands-on lube or maintenance experience. A drive to become one of the best in the business. Strong attention to detail and commitment to excellence. Positive attitude and eagerness to learn from our Certified, Senior and Master Technicians. Valid driver's license and clean driving record. Clean background Your Next Step This isn't just another Apprentice Tech job, it's your pathway to a Mazda Master career on a Great Team! If you're ready to train, grow, and thrive in a dealership environment, we want to meet you!! Automotive Technician Responsibilities and Duties: Perform work as specified on the repair order with efficiency and in accordance with dealership standards Test components and systems using diagnostic tools and special service equipment Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed. Provide an estimate of time needed for additional repairs. Apply today and join a team where your skills are respected, your potential is rewarded! Benefits Overview: BENEFITS ELIGIBLE FIRST DAY OF EMPLOYMENT Germain Automotive Partnership is proud to offer the following benefits for our employees: · Medical Insurance · Dental Insurance · Vision Insurance · Weekly Pay · Parental Leave · 401K · Life Insurance · Short and Long-term Disability Insurance · Paid time off · Holiday Pay · Employee Discounts · State of the art technology If you're looking for a career that allows you to develop, solve problems, and build relationships that last, we want to hear from you!

Our client is seeking an experienced Heavy Truck & Equipment Technician to join their team in Columbus, Ohio. This role is ideal for a highly skilled technician with mechanical and diagnostic expertise who can handle both shop repairs and field service calls. From Class 8 trucks to dozers, excavators, loaders, and hydraulics, you'll work on some of the toughest equipment in the industry. A CDL license is highly preferred to support road testing and field operations. Responsibilities Diagnose, repair, and maintain heavy trucks, dozers, loaders, excavators, and other construction equipment Troubleshoot engines, transmissions, hydraulics, electrical systems, brakes, and suspensions Perform field service calls to complete on -site repairs with minimal downtime Use OEM diagnostic software and tools (Cummins Insite, CAT ET, Detroit Diesel DiagnosticLink, John Deere Service Advisor, Allison DOC) Document work performed, parts used, and service outcomes Road test trucks and equipment to confirm repairs and compliance Collaborate with the parts and service team to ensure efficient workflows Follow all safety standards and company policies Qualifications 3-5 years of experience in heavy truck or heavy equipment repair Strong diagnostic ability with OEM diagnostic software and electronic service tools CDL Class A or B license highly preferred Welding and fabrication experience a plus Valid driver's license with a clean record OEM certifications (Freightliner, Western Star, CAT, Komatsu, John Deere, Volvo, etc.) strongly preferred Benefits (customize per employer) Competitive pay based on experience Health, dental, and vision insurance Paid time off + holidays 401(k) with employer match Ongoing OEM training and certifications PPE, uniforms, and specialty tools provided About SourceLine SourceLine is a flat -fee direct hire recruiting partner specializing in RV, Marine, Powersports, Heavy Truck, and Heavy Equipment. We help dealerships, service centers, and operators hire prescreened candidates who are ready to interview - without the high commissions of traditional agencies. Our U.S. -based team uses targeted outreach and industry knowledge to connect you with the right talent.

Diesel Technicians Wanted! With our New Performance Truck Center and our service department has continued to grow and we need your help! TOP PAY for Diesel Technicians, and you can start fresh in our New Truck Center and have the opportunity for personal and professional advancement in the Automotive Industry. If you consider yourself to be an outgoing and self-motivated individual with a winning attitude and work ethic, Performance is the team for you! APPLY NOW and make going to work fun again! Employee Benefits Package: TOP Level Compensation HSA / FSA Health Plan Dental / Vision Plan Short / Long Term Disability Life Insurance Company Match Retirement Paid Time Off Employee Purchase program The Performance ImpactExceptional · Team · Passion · Community Remember...a smile changes the delivery of everything. If you're ready for a new and exciting career, take the first step and reach out to us today! Requirements As a Diesel Service Technician, you will: Maintain manufacturer training certifications as well as specific & up- to - date knowledge on the product and services available. Properly diagnose, repair, and document services on customer and internal vehicles. Can communicate technical diagnosis and repairs to your service adviser. Obtain a high level of motivation and energy with strong customer service skills. Skills, Experience and Educational Qualifications: Maintain an energetic, positive attitude and work well with others. High School Diploma or GED. Minimum of 3 years Automotive Service experience. Current ASE / MFG. certifications is a plus. Valid driver's license with an acceptable driving record. Pass a pre - employment drug screen. Possess a strong desire for continuing education in area of responsibility.

Join our Ricart Buick GMC Chevrolet team located in the North Columbus area. Ricart Automotive has been Columbus' Top Place to Work since 2013! We offer competitive pay, a generous benefits package, opportunities for advancement, a family environment, strong company culture, and more employee events than anyone in the industry! What We Need From You Job Duties and Requirements: Diesel performance and engine repair Complete MPI inspection for service advisors, including estimate and explanation Test drive vehicles with customers to evaluate noise and vibration concerns Repair vehicles based on diagnosed issues and repair estimate Test drive vehicles after repairs have been done to ensure customers' complaints have been resolved. Determine any additional work that should be done to the vehicle after a test drive File appropriate documentation on each repair Keep up to date on all manufacturer information and training that will affect vehicles' repairs (recalls, etc.) Return the vehicle to the appropriate location, ensuring the vehicle is locked, numbered location is updated, and wiped off/cleaned accordingly. Essential Job Functions: Must have a valid drivers license and meet company motor vehicle report standards Certain manufacturer certifications are preferred but not required. Diesel experience preferred Must be able to stand for long periods Must be able to work in varying temperatures and noise levels Ricart Automotive is an equal opportunity employer.

What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.” We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Location: East Liberty, Ohio Starting Pay - $36.04 - $41.19 Workstyle - Onsite *Relocation assistance for candidates relocating over 50 miles* About this Position: Equipment Service Technicians keeps equipment in good operating condition through effective preventative maintenance and equipment repairs. Effectively communicate technical issues with the equipment service and production teams and maintains equipment data and documentation daily. Responsibilities include: Repairing, maintaining equipment and supporting daily production. Responding to breakdowns and calls to keep production running. Supporting weekend maintenance repair and preventative maintenance activities when necessary. Supporting a reliability centered maintenance program. Supporting team activities and contributing your own ideas. Who we are seeking: Required Work Experience: A minimum of three months of relevant experience in a manufacturing environment with a 2 year technical degree. Or a minimum of two years of relevant experience, if no degree. Required Education: High School Diploma or equivalent. Desired skills: Daily reporting and tracking of activities. Plan, Do, Check, Action follow up items. Immediate response to production floor needs and requirements. Compliance with all safety policies and regulations. Able to communicate clearly in verbal and written format. Basic knowledge of Microsoft products. Ability to be flexible and change work hours as needed. Able to analyze problems and determine root causes. Strong self-direction and drive. Capability to develop a high level a high level of expertise/aptitude in mechanical and electrical areas. Experience with Motoman robots. Experience with Omron programmable logic controllers. Additional Position Factors: Equipment inspections. Daily reporting and tracking of activities. Preventative maintenance. Continuous improvement. Other Job Specific Skills: Flexibility to work 2nd or 3rd shift long term. Flexibility to work weekends, holidays, daily overtime and off shifts as needed. Willingness to travel (percentage of travel varies between roles). What differentiates Honda and make us an employer of choice? Total Rewards: Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Paid Overtime Regional Bonus (when applicable) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Relocation assistance (if eligible) Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued Learning Training and Development Programs Additional Offerings: Tuition Assistance & Student Loan Repayment Lifestyle Account Childcare Reimbursement Account Elder Care Support Wellbeing Program Community Service and Engagement Programs Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.” We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Hourly rate starting between $36.04 - $41.19 Shift: 2nd or 3rd shift (will rotate on all 3 shift's for the first year) *Relocation assistance for candidates relocating more than 50 mile Wage Information $36.04 - $41.19 Job Purpose This position will be joining the Facilities department within Honda Development & Manufacturing of America, LLC's. The Facilities department is responsible for the building which includes new construction, remodels, utility management (electric, compressed air, natural gas, water), building maintenance, end of life equipment replacements and upgrades. The goal of the department is to create a facility that we are proud of and serve our customers. Role Description: Work on a team to perform facilities equipment preventative maintenance, repairs, improvements, and reporting, to maintain a high level of customer service in building, equipment, and utility operations. Continuously develop associate skills through Honda maintenance training program and find ways of introducing technologies and efficiency improvements. Key Accountabilities Complete preventative maintenance and repairs on equipment and systems (e.g., mechanical, electrical, heating, ventilation, and air conditioning, and building controls). Perform daily assigned work order tasks and communicate any follow-up needed Evaluates and recommends equipment improvements to improve availability, capability, and yield. Suggest and revise preventative maintenance to properly maintain facilities equipment Performs equipment failure analysis (including preventative and unscheduled maintenance). Troubleshoots and diagnose equipment problems. Participate in a reliability centered maintenance program for equipment. Participate in team activities to develop and maintain long term equipment reliability. Support total equipment management through daily and proactive activities to improve operations, promoting business targets and objectives. Provide mentorship and teambuilding through work habits, communication and the sharing of knowledge and expertise. Expand and maintain technical expertise through formal and on-the-job training opportunities. Support and engage in activities that drive new ideas, leveraging new technology, new methods and approaches to positively impact Honda's competitiveness. Qualifications, Experience, and Skills Minimum Educational Qualifications: Completion of 2 year technical degree or equivalent equipment service experience Minimum Experience Desired: 3 years of experience in a Facilities environment (industrial, or heavy commercial) Will consider well qualified entry level candidate Other Job-Specific Skills Working knowledge of Facilities low and medium voltage electrical equipment (including substations, switches, cable, starters, Variable Frequency Drives, breakers, bus duct) and Building Management Systems. Ability to troubleshoot mechanical equipment, such as Heating, Ventilation, and Air Conditioning, Refrigeration, Air Compressors, Air Dryers, Boilers, Cooling Towers, Pumps, Plumbing & Piping. Good written and verbal communication skills with the ability to clearly express ideas Comply with Honda Health and Safety Policies Minimum computer (Word, PowerPoint, Excel) Self-motivated, creative thinking, and a positive attitude, continuous improvement and customer service driven Must use time effectively & prevent irrelevant issues or distractions from interfering with work completion. Demonstrate the ability to plan/prioritize work assignments, submit schedules, set clear milestones & completion dates. Demonstrate the ability to collect & analyze pertinent data, identify root cause, and develop effective countermeasures. Working Conditions Identify the working conditions and physical demands which relate to the essential functions of the position (e.g., physical requirements, work environment, travel, necessary overtime, etc.) High level of physical activity. Lots of walking, stairs, climbing, roof, hot/cold climate conditions. Participate in Honda related improvement activities such as Honda Improvement Program Work area focused on interior and exterior facilities mechanical room and manufacturing floor environment Infrequent - Occasional trips to other plants or suppliers ( less than 1x per month ) Ability to work effectively with production, equipment service associates and contractors Willing to suggest improvements or enhancements to facilities operations. Ability to prioritize work assignments with efficient time management. Willingness to work weekends, all shifts, overtime, and shutdowns as required. Complete the required Equipment Service Technical Development Program consisting of approx. 700 hours of classwork and hands-on training over a 4 yr. period. Demonstrate competence with Honda Core Non-Exempt Role and Responsibilities for Maintenance Technician / Equipment Service. What differentiates Honda and makes us an employer of choice? Total Rewards: Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Regional Bonus (when applicable) Manager Lease Car Program (No Cost - Car, Maintenance, and Insurance included) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Relocation assistance (if eligible) Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued learning Training and Development Programs Additional Offerings: Lifestyle Account Childcare Reimbursement Account Elder Care Support Tuition Assistance & Student Loan Repayment Wellbeing Program Community Service and Engagement Programs Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.