Service Partners jobs in Little Rock, AR

Job Title: Production Technician ASU Duration : 18 months Shift: 2hour shift 7am-7pm central time The primary function of this job is the safe operation and maintenance of client Merchant Gas production facilities. The Production Technician II is responsible for maintaining plant production, operating efficiency, regulatory compliance, and safety. ESSENTIAL DUTIES & RESPONSIBILITIES: Level II: Works unattended completing basic activities to operate the plant and supervise site activities when more senior techs or facility manager is not available. Operational Duties: ● This role encompasses a wide range of responsibilities, including performing outside/truck loading, basic board operations, compressor start-up and shutdown, performing Air Separation Units (ASU)/Nitrogen Liquefaction Unit (NLU) /Liquid Carbon Dioxide (LCO2) /High Pressure Nitrogen (HPN) warm plant start-ups (H2 cold) as well as performing routine Vacuum Swing Adsorption (VSA) start-up, if applicable. ● Perform minor maintenance activities, maintain local spare parts, issue basic Safe Work Permits, implement basic Lock Out Tag Out (LOTO) and lead pre-job briefing. ● Apply process safety programs to operations including, Management of Change (MOC), etc., participating in root cause analysis for incidents, near misses, good catches, troubleshooting equipment for root cause of abnormal situations, calibrating analyzers, if applicable and participate in documenting incidents and retrieving Client and site-specific operating procedures, incident/injury reporting, etc in the document management software, Intelex. ● Ensure on-site contractors, vendors, guests, or visitors site specific training requirements are met and documented and supporting Hold Harmless & Insurance Policies and Procedures. In addition, it involves performing administrative function responsibilities as delegated by the Plant Manager. ● Exhibit the understanding of and perform job duties in compliance with all local and federal governmental regulations (Food and Drug Administration (FDA), Occupational Safety and Health Administration (OSHA), Environmental Protection Agency (EPA), Department of Transportation (DOT), Current Good Manufacturing Practice (cGMP), etc) , and all company policies and procedures including Management of Change (MOC's), Pre-Startup Safety Review (PPSR's), and Qualified Integrators and Resellers (QIR's), etc. Communication & Collaboration: ● This role places a strong emphasis on communication, with a focus on interacting with national and local product scheduling to meet customer requirements and ensure customer product delivery requirements, pertinent documentation and affiliated reporting requirements are completed on time and with zero defects. Safety and Regulatory Compliance: ● This role includes a commitment to strict adherence to company policies, safety guidelines, and procedural standards, as well as instilling safety in others by being safety minded and modeling good safety practices and compliance to Qualification and Training program in company electronic training systems. ● Completion of the client Safety Pledge and being familiar with the requirements as well as completing introductory Health, Safety, Environmental and Social (HSES) training. MINIMUM QUALIFICATIONS: To perform this position successfully, an individual must be able to perform each job duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. Required Education: ● Associates degree desirable or technical training (or equivalent experience) required. Required Length & Type of Experience: ● 1 year of related (ASU) operations experience. Knowledge, Skills & Abilities: ● Knowledgeable in plant Human Machine Interface (HMI) screens and/or control stations ● Knowledgeable in the work order process ● Ability to implement site Emergency Action Plan. ● Ability to operate the plant (including remote facilities) in steady state/normal operation and can initiate action to take in event of emergency or unusual conditions. ● Ability to update downtime in Systems Applications and Products (SAP) and/or Lucene Image Retrieval (LIRE), when required. ● Ability to operate a back-up system (if applicable) without assistance. ● Ability to understand plant Interlock schedules including what triggers Interlocks and shutdowns, and what resulting actions occur. ● Demonstrate the ability to communicate with both written and spoken English at the 12th grade level. ● Demonstrates detailed understanding of P&IDs and can draw plant process schematic from memory. ● Demonstrates knowledge retention of content. ● Must be mechanically inclined

Russellville, AR This role offers a challenging, diverse and exciting opportunity to become part of our Maintenance team. In general, all Electrician roles are required to repair, install, replace, program, and test all electrical circuits, and equipment. Periodically perform or assist others in routine to moderately complex repairs or installation of automatic electrical and electronic controls. What you will do: Perform routine electrical/electronic preventative maintenance on mill equipment Responsible for the repair, modification, and maintenance of a variety of electrical and electronic equipment Perform tasks like wiring circuits, replacing components, and repairing electronic devices Performs test reading using several different instruments, including multi-meter and Megger. Remain current in technical changes or equipment designs by attending classes as needed. Work rotating shifts, which includes nights, holidays, weekends, and overtime as scheduled or required. Willing and able to maintain strict adherence to safety rules and regulations, including wearing safety equipment and completing all required training. Other duties as assigned What you need to be successful: High School Diploma or GED Basic reading, writing, and arithmetic skills Background in Electrical fundamentals Must have knowledge in 3 phase and single-phase power distribution systems, motor controls, wiring, and troubleshooting of such systems. Experience with 480-volt power and logic circuits Strong computer, math, analytical, and planning skills Must be able to understand and follow electrical schematics proficiently without supervision Familiar with machine control systems Ability to troubleshoot (complex) machine control systems Identify the features and functions of controllers Describe and compare pneumatic and electronic controllers Identify the signal path through a control circuit A combination of higher education and experience will be taken into consideration Eligible to legally work in the United States without employer sponsorship Willing and able to work a schedule which will include nights, weekends, and holidays Willing and able to work on an emergency call-in basis when required Ability to work as part of a team and deliver value to the team Willingness and ability to cross-train to learn new jobs and skills Consistent, predictable attendance What will make you stand out: VFD drives experience PLC Experience Able to interpret PLC logic as it relates to its application to process and equipment for troubleshooting purposes Outstanding benefits package including: Competitive starting pay Benefits starting Day 1 On-the-job training A culture that strongly believes in promoting from within Medical Dental 401k with company match Life Insurance Disability Insurance Paid vacations and holidays Wellness Incentives Employee Referral Program Safety is one of West Fraser's core values and our employees can expect a challenging, stable work environment with career development opportunities. Apply: If you are ready to build your career in a company that thrives on growth, a safe work environment, rewarding work, challenge, and opportunity, come build your career with us at West Fraser: *************************** We thank all candidates for their interest; however, only those selected for an interview will be contacted. Please apply through our online application process. Be sure to attach your resume to your online profile as resumes will not be accepted at the site. No phone inquiries, please. West Fraser is a diversified wood products company producing lumber, OSB, LVL, MDF, plywood, pulp, newsprint, wood chips, and energy with over 60 facilities in Canada, the United States, and Europe. We are the largest lumber producer in North America, a leading global manufacturer of wood-based panels, and the world's largest producer of oriented strand board (OSB). Our employees operate in a culture that values safety first and rewards hard work. We recognize and support our team culture and focus on growing our team by promoting from within - many of our employees have built their careers with us. West Fraser is a growing company that believes strongly in promoting from within and prides itself on providing a challenging environment with continuous development. The successful candidate should be interested in future growth opportunities within the company. West Fraser believes inclusive, diverse teams build a more vibrant workforce, safer operations, and a stronger company overall. We strive to create workplaces and leadership teams that are reflective of the diverse communities we are a part of. We will not discriminate against any applicant for employment on the basis of race, gender, national origin, or any other protected legal characteristic. West Fraser is an Equal Opportunity Employer M/F/V/D & Drug-Free Workplace Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

*Please give us a call after completing an application.* *870-###-####* REQ # 72655 Pilgrim's wants YOU to join our hourly production team! Positions start at *$16.15 */hour Benefits include: * Medical, dental and vision insurance * 401K contributions * Better Futures Program -2 Year Community College tuition paid for you or your dependents! * Opportunity to grow your career through our Supervisor Development Program At Pilgrim's, Safety Is A Condition, which means the safety of our team members comes first - always. We have implemented safety measures to prevent the spread of COVID-19. We are working to ensure social distancing guidelines are followed within our facility. Each day, temperature screens are performed for each employee and visitor before entering the facility. Face coverings are available to all team members and enhanced cleaning and sanitation is regularly performed. ESSENTIAL DUTIES & RESPONSIBILITIES: • Processes product using tools (to include knives), manual labor, and equipment provided in accordance with USDA and Pilgrim's Company product standards and procedures. • Process product according to operating procedures and quality/quantity expectations. • Observes equipment operation, notifying appropriate personnel of any malfunctions and/or safety issues/concerns. • Clean and organized work area. • Assist others with the skills and knowledge gained from the position. • Observes all company personnel, quality, safety, and food safety policies. Maintain a positive work atmosphere by acting and communicating in a manner so that you work effectively and cooperatively with customers, clients, co-workers, and leadership teams. • Recognizes and acts on incidents and safety risks. Consistently practices and enforces safe work habits and drives those habits throughout the organization. • Participates in process improvement and problem solving utilizing continuous improvement and rational thinking methodologies. • Follow all company animal welfare guidelines. • Other duties as directed. BASIC SKILLS AND QUALIFICATIONS: • Must be able to work safely • Must be able to work shift assigned days/nights including some Saturdays • Ability to apply common sense and comprehend simple instructions • Ability to deal with problems involving a few concrete variables in standardized situations. • Ability to work in cool temperatures (around 40 degrees) • Ability to stand and use hands for 8-11 hours per day • Ability to multitask and work quickly • Must be a team player and be willing to work close to other employees at some stations that are less than 3 feet apart. • Must have good communication skills. • Good hand and eye coordination required. . *EOE, including disability/vets*. * * *Please give us a call after completing an application.* *870-###-####*

At Pilgrim's, Safety Is A Condition, which means the safety of our team members comes first - always. placed in. Health Benefits on day 60 401(k) with Company Match Life insurance Paid Tuition Processes product using tools (to include knives), manual labor, and equipment provided in accordance with USDA and Pilgrim's Company product standards and procedures. · Process product according to operating procedures and quality/quantity expectations. · Observes equipment operation, notifying appropriate personnel of any malfunctions and/or safety issues/concerns. · Clean and organized work area. · Assist others with the skills and knowledge gained from the position. · Observes all company personnel, quality, safety, and food safety policies. Maintains a positive work atmosphere by acting and communicating in a manner so that you work effectively and cooperatively with customers, clients, co-workers, and leadership teams. · Recognizes and acts on incidents and safety risks. Consistently practices and enforces safe work habits and drives those habits throughout the organization. · Participates in process improvement and problem solving utilizing continuous improvement and rational thinking methodologies. · Follow all company animal welfare guidelines. · Other duties as directed. EDUCATIONAL REQUIREMENT: High school diploma or equivalent (GED) preferred. BASIC SKILLS AND QUALIFICATIONS: • Ability to comprehend simple instructions • Ability to apply common sense. • Ability to deal with problems involving a few concrete variables in standardized situations. • Ability to work in cool temperatures (around 40 degrees) • Ability to stand and use hands for 8-11 hours per day • Ability to multitask and work quickly • Must be a team player and be willing to work close to other employees at some stations. (Less than 3 feet apart.) • Must have good communication skills. • Good hand and eye coordination required. • High School diploma or G.E.D. preferred. • Food or production experience preferred. EOE, including disability/vets

*FSQA Sanitation Supervisor - *Guides the day-to-day operations of a team monitoring product attributes to assure product quality is at targeted levels of the customer product specifications. Ensures food safety, regulatory and company compliance, and compliance with all established safety procedures. Ensures all required checks and tests are performed within the plant as prescribed in the USDA regulations, Butterball LLC Policies, and the HACCP program. Responsible for retained product releases. * Butterball Core Competencies * Caring about people, valuing contributions, and empowering to succeed is the Butterball Way. We recognize the value that different perspectives and cultures bring to Butterball and seek to create an environment where everyone can thrive. Everyone has a seat at the table and is expected to embody our core competencies: * Safety First: We put safety first. The health, safety, and well-being of our people, products, and turkeys is everyone's responsibility and everyone's jobs. * Integrity: We trust each other to do the right thing. We act with integrity and gain the confidence and trust of others through honesty, respect, and authenticity. * Stewardship: We take care of what matters. We are accountable to our commitments and take responsibility for the well-being of our teams, our quality, our customers, our business, our brand, and our communities. We are always answerable for our actions and those we lead. * Enthusiastic Attitudes: We create a climate where everyone feels they belong and can be engaged, every day. Where our people are enthusiastic and motivated to do their best and work together to make great things happen. * Continuous Improvement: We are committed to continuous improvement. We challenge ourselves and our company to constantly learn, develop, grow, improve, and innovate. *Key** Responsibilities: ** * * Supervises the day-to-day activities of a team of entry level individual contributors. Provides guidance, coaching, and support to ensure successful completion of tasks. Participates in HR activities such as hiring, terminations, performance management, goal setting, team member development, scheduling, etc. Enforces systems, policies, and procedures. Reviews and approves timecards. * Responsible for ensuring adherence to all food safety regulations and quality standards on the Plant floor(s), including contractor and construction projects. Provides coaching and follows up with technicians and operations to ensure compliance. * Assists with the development and implementation of policies, process control procedures and monitoring, and standard practices. * Troubleshoots plant quality, safety, and sanitation problems. Implements corrective actions to address and mitigate identified issues. * Promotes GMP (Good Manufacturing Practices) and Food safety across the organization. Provides coaching and training across the operation's teams as needed. * Works closely with USDA. * Reviews all paperwork to ensure proper procedures are followed. Investigates and escalates issues as appropriate. * Assists with facility, customer, and third-party audits and audit preparation. Responsible for daily SOP audits. * Participates in investigation of product failures and customer complaints. May provide recommended solution to management team. * Communicates with all levels of management to ensure they maintain control of the process. * Identifies opportunities and supports creation and implementation of plant processes and/or product improvement projects. • Maintains the technical expertise of team with recurring training in all areas with their functional area. *Knowledge, Skills & Abilities: ** * * Progressive sanitation supervision experience in an FDA or USDA regulated food manufacturing facility is preferred. * Ability to coach, develop, support, and guide a team with technical skills * Knowledgeable or ability to learn product specifications, plant quality procedures, and plant HACCP plan * Familiarity with GMPs, Food Safety, HACCP, USDA and SSOPs * Ability to draft reports and document procedures * Ability to perform a risk analysis • Good communication and interpersonal skills with the ability to effectively present information and respond to questions * Ability to apply basic math and calculate figures and amounts such as proportions, percentages, area, circumference, and volume * Ability to define problems, collect data, establish facts, and draw valid conclusions * Combination of wet and dry sanitation leadership experience in driving a robust and sustainable sanitation program in food manufacturing is required. * Demonstrates strong problem-solving skills including root cause analysis, risk assessment and corrective action. * Proven ability to work calmly and effectively under pressure is required. * Proven ability to work in a fast-paced and deadline-oriented environment is required. * HACCP and Internal Auditor certificates are preferred. * Flexible to work weekends, overtime, and holidays as needed. * Proven ability to communicate effectively, appropriately, and respectfully with each member of the organization is required. * Ability to adapt to changing organizational and operational needs; ability to lead others through change. * Knowledge of sanitation processes and procedures is required. *Education & Experience: ** * * Highschool diploma / GED * Bilingual in English/Spanish preferred. * 4+ years of relevant experience or the knowledge, skills, and abilities to succeed in the role * 1+ year of leadership experience or the knowledge, skills, and abilities to succeed in the role * Experience in a food environment *Physical Demands* While performing the duties of this job, the employee may be regularly required to stand, sit, talk, hear, reach, stoop, kneel, and use hands and fingers to operate a computer, telephone, keyboard, and occasionally lift up to 15 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, color vision and the ability to adjust focus *Working Conditions & Travel Requirements* * Work will be performed in a variety of conditions including a climate-controlled office environment(s) and in a manufacturing plant environment with varying conditions, such as cold areas, wet areas, warm areas, chemicals, and other site conditions. * This position requires the individual to wear and work in personal protective equipment while in the manufacturing environment. * The noise level of the office environment is usually moderate; the noise level in the manufacturing environment may exceed 85 DBA and require hearing protection. * Occasional travel may be required. The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of what is required of personnel so classified. Furthermore, they do not imply or establish a contract for employment and are subject to change at the discretion of the employer. Butterball, LLC is an equal opportunity employer and is committed to the fair and impartial treatment of all employees and applicants for employment without regard to gender, age, race, religion, color, national origin, physical or mental disability, military/veteran status, sexual orientation, gender identity and expression, genetic information, marital status, parental status, pregnancy, or any other status protected by law. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is deemed Safety Sensitive for purposes of Butterball's Drug/Alcohol Screening & Testing Policy. Please refer to the Drug/Alcohol Screening & Testing Policy for important information, including the obligations that Safety Sensitive employees have with respect to the lawful use of drugs and medications. We embrace equal opportunity employment. Butterball is committed to the fair and impartial treatment of all employees and applicants for employment without regard to gender, age, race, religion, color, national origin, physical or mental disability, military/veteran status, sexual orientation, gender identity and expression, genetic information, marital status, parental status, pregnancy, or any other status protected by law. This position is deemed Safety Sensitive for purposes of Butterball's Drug/Alcohol Screening & Testing Policy. Details will be provided to individuals who receive a conditional job offer, or upon request.

Please give us a call after completing an application. ************ REQ # 72655 Pilgrims wants YOU to join our hourly production team! Positions start at $16.15 /hour Benefits include: Medical, dental and vision insurance 401K contributions Better Futures Program 2 Year Community College tuition paid for you or your dependents! Opportunity to grow your career through our Supervisor Development Program At Pilgrims, Safety Is A Condition, which means the safety of our team members comes first - always. We have implemented safety measures to prevent the spread of COVID-19. We are working to ensure social distancing guidelines are followed within our facility. Each day, temperature screens are performed for each employee and visitor before entering the facility. Face coverings are available to all team members and enhanced cleaning and sanitation is regularly performed. ESSENTIAL DUTIES & RESPONSIBILITIES: Processes product using tools (to include knives), manual labor, and equipment provided in accordance with USDA and Pilgrims Company product standards and procedures. Process product according to operating procedures and quality/quantity expectations. Observes equipment operation, notifying appropriate personnel of any malfunctions and/or safety issues/concerns. Clean and organized work area. Assist others with the skills and knowledge gained from the position. Observes all company personnel, quality, safety, and food safety policies. Maintain a positive work atmosphere by acting and communicating in a manner so that you work effectively and cooperatively with customers, clients, co-workers, and leadership teams. Recognizes and acts on incidents and safety risks. Consistently practices and enforces safe work habits and drives those habits throughout the organization. Participates in process improvement and problem solving utilizing continuous improvement and rational thinking methodologies. Follow all company animal welfare guidelines. Other duties as directed. BASIC SKILLS AND QUALIFICATIONS: Must be able to work safely Must be able to work shift assigned days/nights including some Saturdays Ability to apply common sense and comprehend simple instructions Ability to deal with problems involving a few concrete variables in standardized situations. Ability to work in cool temperatures (around 40 degrees) Ability to stand and use hands for 8-11 hours per day Ability to multitask and work quickly Must be a team player and be willing to work close to other employees at some stations that are less than 3 feet apart. Must have good communication skills. Good hand and eye coordination required. . EOE, including disability/vets. Please give us a call after completing an application. ************

Come be an Employee-Owner of one of the nation's largest producers of metal roofing and siding! We sell, manufacture, build, and distribute metal building components and packages. Since 1988 we've grown to over 13 locations nationwide. We make raving fans of our customers with our “right, on time, every time” commitment. So, who are we looking for? People who “Own It” - Commitment to the customer, the company, and each other: You are customer-focused with an eye for detail. You are reliable. People who “Can Do” - Our Attitude: You are an innovative thinker pursuing continuous improvement. You embrace teamwork. You want to positively make an impact and open to change. People who “Act in Love” - Treats others with humility, respect, kindness, honesty, patience, and self-control. You enjoy giving back to your community. We take great pride in the communities we live in, so we give back with our time and talents. Each year you can take paid time off to support a cause close to your heart. And what will you do? Summary: Senior Software Developer responsibilities include participating in the entire software development life cycle, debugging applications and configuring existing systems. Core Functions: • Act as lead software engineer in defining technical specifications and development requirements that result in high performing technologies • Collaborate closely with the business support teams to assist in resolving critical production issues to help simplify and improve business processes through the latest in technology and automation • Adopt and model a DevOps mindset by applying automation, continuous integration, and continuous delivery in everything we do • Develop and enhance product and/or applications with limited direction to solve business problems of medium complexity by keeping customer experience at the forefront • Support Epicor Kinetic ERP platform by understanding underlying business processes to identify needed development and customizations. • Requires continuous updating of knowledge through self-study, self-discovery, tutorials, and classes. • Communicate difficult concepts, providing technical and professional interpretations and recommendations. Key Measures of Success: • Able to interact with customers, internal and external, with a focus on customer service and exceeding customer expectations. • Able to understand and interpret business processes as it relates to the customer's needs. • Understand manufacturing processes and value stream mapping (flow of the plant). • Excellent troubleshooting and communication skills • Ability to understand business requirements and translate them into technical requirement specifications. • Strong verbal communication and planning skills • Consistently exhibits and displays the company's values of “Own It. Can Do. Act in Love.” o Own It - Commitment to customer, company, and each other. o Can Do - Team Player, Open to Change, & Pursuing continuous improvement. o Act in Love - Treating others with humility, respectfulness, kindness, honesty, patience, and self-control. Education & Experience: Minimum Required: • Bachelor's degree in computer science or related field preferred • Five years of programming experience • Proven experience as a .NET Developer • Familiarity with the ASP.NET framework, .NET Core, SQL Server and design/architectural patterns (e.g. Model-View-Controller (MVC)) • Knowledge of at least one of the .NET languages (e.g. C#, Visual Basic .NET), React.js, and HTML5/CSS3 • Familiarity with architecture styles/APIs (REST, RPC) • Understanding of Agile methodologies • Experience with Azure DevOps and Azure Cloud Preferred • Epicor Kinetic ERP support, development and implementation experience. Physical Demands & Work Environment: Work is performed in an office environment. This role will routinely utilize standard office equipment to perform the core functions listed in this . This position requires the ability to occasionally lift office products and supplies as well as communicate verbally and electronically. The work is primarily sedentary and requires extensive reading to perform the core functions listed in this job description. Reasonable accommodation may be made to enable individuals with disabilities to perform core functions. Travel 2-4 weeks in a year Benefits Offered: At Central States, we are an ESOP. That means each one of our employees is an owner of the company and receives an allocation of stock every year. This allows all our employees to share in the wealth and success of the company. We also offer: • 401K - We match up to 4% • Medical • Dental • Vision • Holiday pay • Vacation pay • Mental health resources • Healthcare coordinators • Life insurance • Health Savings Accounts • Flexible Spending Account • Short-Term Disability • Long-Term Disability • Profit-Sharing bonus • Performance based merit increases • Education assistance available - Up to $5,250 each year Central States Manufacturing, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Responsible for overseeing and maintaining the information technology infrastructure at a specific site or location within the organization and providing support remotely to other facilities when needed. Responsible for the day-to-day IT operations, providing technical support to end-users, ensuring network and system reliability, and coordinating with central IT teams to align on and implement IT policies and procedures. Key Responsibilities • Monitors and maintains site-specific infrastructure including servers, workstations, network equipment, and other hardware (i.e., switches, routers, access points, new hire equipment, etc.). • Troubleshoots and resolves IT related problems reported by team members. Solves moderately complex problems utilizing resources, pre-defined solutions, good judgment, and expertise. • Serves as the site's point of contact for IT related emergencies and participates in disaster recovery planning. • Conducts hardware and software inventory management for the site. Collaborates with IT vendors for procurement, maintenance, and support of IT equipment and services. • Installs, configures, upgrades, repairs, and troubleshoots operating systems, software applications, and hardware components. Coordinates equipment replacement when necessary. • Efficiently oversees the IT service desk ticketing system, delivering excellent customer service through timely, courteous, and diligent responses and status updates on all service requests. • Provides technical support to end-users, addressing hardware and software issues promptly. Assists users in understanding and adhering to IT policies and best practices. • Enforces and ensures compliance with relevant regulations, industry standards, and IT security policies and procedures. • Ensures the security and integrity of data through data management practices and system updates. • Collaborates with the central IT team to implement network and system improvements. Utilizes technical expertise to enhance IT system efficiency across the organization. • Develops and helps standardize and document solutions to IT issues. Ensures proper documentation for all IT systems, configurations, and procedures. • Prepares reports on IT activities and incidents as required. Minimum Qualifications (Educations & Experience) • High school diploma, GED, or equivalent • 3+ years or relevant experience or the knowledge, skills, and abilities to succeed in the role Knowledge, Skills, and Abilities Butterball Core Competencies Caring about people, valuing contributions, and empowering to succeed is the Butterball Way. We recognize the value that different perspectives and cultures bring to Butterball and seek to create an environment where everyone can thrive. Everyone has a seat at the table and is expected to embody our core competencies: • Safety First: We put safety first. The health, safety, and well-being of our people, products, and turkeys is everyone's responsibility and everyone's jobs. • Integrity: We trust each other to do the right thing. We act with integrity and gain the confidence and trust of others through honesty, respect, and authenticity. • Stewardship: We take care of what matters. We are accountable to our commitments and take responsibility for the well-being of our teams, our quality, our customers, our business, our brand, and our communities. We are always answerable for our actions and those we lead. • Enthusiastic Attitudes: We create a climate where everyone feels they belong and can be engaged, every day. Where our people are enthusiastic and motivated to do their best and work together to make great things happen. • Continuous Improvement: We are committed to continuous improvement. We challenge ourselves and our company to constantly learn, develop, grow, improve, and innovate. Essential Knowledge, Skills, and Abilities • Strong written and verbal communication and interpersonal skills • Ability to create and maintain strong rapport with internal and external partners • Detail-oriented with the capabilities of handling multiple priorities, tasks, and projects simultaneously • Critical thinking, investigatory, and problem-solving abilities • Solid business acumen with the ability to comprehend how IT influences various facets of the organization • Firm knowledge of best practices in IT administration, Microsoft O365 products/services and ManageEngine • Proven record of effectively utilizing IT incident ticketing systems to handle and prioritize requests • Strong knowledge of computer hardware, operating systems, and software applications • Proficient with Microsoft Suites (Teams, Word, Excel, PowerPoint, Outlook, etc.), network protocols, systems security, and troubleshooting • Skilled in diverse types of computer hardware, software, peripherals and components, networking protocols and communications Preferred Knowledge, Skills, and Abilities • Associates or Bachelors in related field • CompTIA A+ Certification • Experience with ticketing systems such as SolarWinds Service Desk, ServiceNow, Zendesk, or Jira Service Management Physical Demands • While performing the duties of this job, the employee may be regularly required to stand, sit, talk, hear, reach, stoop, kneel, and use hands and fingers to operate a computer, telephone, keyboard, and occasionally lift up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, color vision and the ability to adjust focus. Working Conditions & Travel Requirements • Work will be performed in a variety of conditions including a climate-controlled office environment(s) and in a manufacturing plant environment with varying conditions, such as cold areas, wet areas, warm areas, chemicals, and other site conditions. This position requires the individual to wear and work in personal protective equipment while in the manufacturing environment. • The noise level of the office environment is usually moderate; the noise level in the manufacturing environment may exceed 85 DBA and require hearing protection. • Occasional travel may be required. Disclaimer The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of what is required of personnel so classified. Furthermore, they do not imply or establish a contract for employment and are subject to change at the discretion of the employer. Butterball, LLC is an equal opportunity employer and is committed to the fair and impartial treatment of all employees and applicants for employment without regard to gender, age, race, religion, color, national origin, physical or mental disability, military/veteran status, sexual orientation, gender identity and expression, genetic information, marital status, parental status, pregnancy, or any other status protected by law. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job.

Performs functions directed towards successfully and efficiently meeting shipping goals for customer orders by performing all required shipping and receiving functions. Shift available: 3rd Shift (11:00pm - 7:00am) Benefits: Medical Insurance Prescription Drug Plan Dental/Vision Insurance Employee Incentive Plan Flexible Spending Account Cash Accumulation Plan-401K Life/AD&D Insurance Short- Term/Long-Term Disability Vacation Plan Paid Holidays Employee Assistance Program Adoption Assistance Program Tuition Reimbursement Maternity/Paternity Leave Pet Insurance Essential Functions: Operates fork lift to load and unload vehicles. Must insure all products are properly coded. Must pull orders and assist in warehouse placement of stock. Must assist in inventory and cycle counts Must be able to complete all required logs, complete shipping and receiving paperwork, and Perform monthly inventory without assistance. Assist Set-up in pulling ingredients or loading blending platforms, when there are no other duties that must be done Must fill in for supervisor Must have knowledge of finished goods and raw material storage areas Must have complete understanding of shipping and receiving department including paperwork This person will operate as a self starter, and be able to multi-task Qualifications: High School Diploma or GED equivalent. Minimum of 2 years warehouse experience within a food manufacturing environment. Ability to comfortably operate standard warehouse equipment, including proficient operation of stand up forklift and load move system. Work Environment: The job is performed in the production area where the person will be exposed to strong aromas, airborne dust particles emanating from ingredients being used, and will be in the presence of or otherwise operating machinery. Disclaimer: The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. New Weds Foods is an Equal Opportunity Employer. Newly Weds Foods will only employ those who are legally authorized to work in the United States without assistance or support from Newly Weds Foods. Any offer of employment is conditional upon the successful completion of a background investigation and drug screen.

What We Do We empower our defense and law enforcement customers to focus on their primary mission by removing friction points and setting them up for long-term success. VWI provides facilities and infrastructure management; our specific services include housing management, custodial services, facilities management, operations & maintenance, and various professional services. By providing strategic, responsive, and mission-driven solutions, we forge long-term partnerships with our customers, vendors, and team members. We invite you to join our team, providing essential services for those who serve our country. What You'll Do Administer the safety program in compliance with EM 385-1-1 and OSHA standards. Serve as the primary point of contact for safety management. Ensure hazard analyses, controls, and safety training are properly executed. Designate and coordinate Alternate SSHOs and Designated Representatives when required. Maintain training documentation and produce evidence of compliance upon request. What You'll Have Completion of OSHA 30-hour training (certificate or training card). At least five years of continuous safety experience in construction, O&M, or general industry, including hazard analysis and safety program management. Documented eight hours of formal safety/health training per year for the past five years. Preferably trained in TJC Environment of Care/Life Safety Code standards. Ability to supervise and enforce compliance with safety regulations. Must ensure duties are not dual-hatted if it compromises effective safety oversight. What We Offer At VWI, our people are our greatest strength. Our respect for the skills and expertise of our employees drives every decision we make. We strive to uphold our values of respect, dignity, teamwork, and transparency in the benefits and compensation we offer to our employees. Medical, dental, and vision insurance, covered by employer-funded Health & Welfare contributions, as per SCA regulations. Paid Time Off and Vacation Days Opportunities for bonuses and compensation increase over and above guaranteed SCA wages. Opportunities for promotion to supervisor and management positions Leadership and development opportunities VWI is an Equal Opportunity Employer

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventive maintenance, and/or design of mechanical, and electrical equipment improvements as well as complex systems as the employee's job specialty requires. Provides troubleshooting support on equipment and technical support on production lines as appropriate for the employee's job specialty. Maintains in-depth technical knowledge of numerous systems as the employee's job specialty requires. Performs research and procedures as the employee's job specialty requires. · Programs, troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes predictive equipment and interprets results for analysis, equipment condition assessment, troubleshooting and proactive maintenance. Including but not limited to infrared thermography, ultrasonic testing, power quality analysis, laser interferometry, ball bar, and vibration analysis. · Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. · Identifies and sources parts, supplies and repair items as necessary. Suggests alternative items and engineered solutions to improve reliability. · Independently performs maintenance as per industry standards. · Complies with 5S and housekeeping standards. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Studies and investigates technical and systems methods, tools, and innovations that can be implemented in ATS sites to improve maintenance practices and updates documentation. · Prepares input for cost analysis for new equipment, repair/rebuild proposals, cost savings and innovations as required. · Updates records and reviews CMMS history and analyzes data. · Provides technical contents of sales quotations and performs T&M duties as required. · Trains and coaches less proficient technician. Assumes project manager responsibilities as assigned. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 7 years of related experience in specific industry; or, 10 years of experience in specific industry. · Proficiency in predictive technologies including vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. · Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use hand tools and specialized tools as appropriate. · May be required to travel. · Six Sigma experience desired. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we'll give you what you need to make it happen. It won't always be easy, growing takes grit. But at ABB, you'll never run alone. Run what runs the world. This Position reports to: Director, Data Center Services Center of Excellence Data Center COE Service Site Manager At ABB, we are dedicated to addressing global challenges. Our core values: care, courage, curiosity, and collaboration - combined with a focus on diversity, inclusion, and equal opportunities - are key drivers in our aim to empower everyone to create sustainable solutions. Write the next chapter of your ABB story. Your role and responsibilities In this role, you will have the opportunity to lead FWT, installation, commissioning, testing, and handover activities on-site, acting as the single point of contact for the customer. Each day, you will manage on-site presence throughout the project, ensuring coordination and smooth execution of all work activities. You will also showcase your expertise by planning, scheduling, and coordinating service resources based on guidelines. The work model for the role is remote (#LI-Remote) You will be mainly accountable for: * Plans project on-site activities with Project Manager including necessary local resources, equipment and milestones. * Coordinates agreement between customer and external resources on construction targets, health and safety requirements, site organization and policy. * Responsible, from receiving the assigned site area from the customer or Project Manager to handing over to the end customer on completion day, for coordinating all on-site activities to ensure the successful execution of start-up, construction, erection, testing and commissioning activities in alignment with contract specifications, quality standards, schedule, and safety requirements. * Serves as a project representative by building and maintaining effective relationships with customers as well as other local organizations such as authorities, banks, and suppliers to ensure their active support of field activities. * Ensures detailed and up-to-date construction Health & Safety (H&S) plan is in place in respect of each work package, compliant with the ABB H&S plan. * Ensures all on-site resources are properly trained on company health, safety and environment policy and proactively promotes health and safety considerations to project partners throughout the project. * Empowered to suspend any activities on site (be it by ABB personnel or by subcontractors) in case of HSE violation and, if a situation arises, takes the necessary steps to ensure that ABB employees and other persons who may be present are not put at risk. * Ensures correct handling, storage and installation of ABB-delivered equipment, coordinating on-site storage as well as shipment logistics to secure timely site delivery of equipment and material. * Manages the sub-contractors on site hired by ABB to ensure necessary quality and progress achieved to meet delivery date and agreed standards. * Controls project cost for the project site work, monitors actual spend against forecasts, and estimates final cost for the same. Manages the petty cash and has delegated authority for local purchasing within agreed limits. * Ensures all documentation is modified and updated as necessary, the document handling system is maintained, and latest revisions are used for the construction work on site. * Ensures (with HR support) that the area of responsibility is properly organized, staffed, skilled and directed. * Guides, motivates and develops direct and indirect reports within HR policies. Coordinates local accommodation, site facilities, office equipment, etc. Qualifications for the role * BS Engineering, BS Management required. * 5+ Years Field service project experience with an electrical OEM, experience leading long term field assignments, and field quality assurance delivery focusing on procedures and implementation. * Ability to travel 80-100% of the time within North America and ability to be away from home for extended periods. * Strong understanding of site commissioning and oversight of engineered solutions including IEC61850 projects. * Ability to develop and implement test, start-up, and commissioning plans with third party Cx agents. * Experience leading start-up teams responsible for ABB and GE LV and MV electrical equipment, relays, and PRN networks preferred. * Experience leading multidisciplinary site teams of electrical field engineers and technicians as well as third party contractors preferred. * Candidates must already have a work authorization that would permit them to work for ABB in the US. More about us ABB's Service Division partners with our customers to improve the availability, reliability, predictability and sustainability of electrical products and installations. The Division's extensive service portfolio offers product care, modernization, and advisory services to improve performance, extend equipment lifetime and deliver new levels of operational and sustainable efficiency. We help customers keep resources in use for as long as possible, extracting the maximum value from them, and then recovering and regenerating products and materials at the end of their useful life. We value people from different backgrounds. Apply today for your next career step within ABB and visit *********** to learn about the impact of our solutions across the globe. #MyABBStory ABB is an Equal Employment Opportunity and Affirmative Action employer for protected Veterans and Individuals with Disabilities at ABB. All qualified applicants will receive consideration for employment without regard to their- sex (gender identity, gender expression, sexual orientation), marital status, citizenship, age, race and ethnicity, inclusive of traits historically associated with race or ethnicity, including but not limited to hair texture and protective hairstyles, color, religious creed, national origin, pregnancy, physical or mental disability, genetic information, protected Veteran status, or any other characteristic protected by federal and state law. For more information regarding your (EEO) rights as an applicant, please visit the following websites: ******************************************************************************************** As an Equal Employment Opportunity and Affirmative Action Employer for Protected Veterans and Individuals with Disabilities, applicants may request to review the plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at **************. Protected Veterans and Individuals with Disabilities may request a reasonable accommodation if you are unable or limited in your ability to use or access ABB's career site as a result of your disability. You may request reasonable accommodations by calling an ABB HR Representative at ************** or by sending an email to ****************. Resumes and applications will not be accepted in this manner. While base salary is determined by things such as the successful applicant's qualifications and experience, this position is expected to pay between $98,700 and $157,920 annually and is eligible for a short-term incentive plan/annual bonus. my BenefitsABB.com We value people from different backgrounds. Could this be your story? Apply today or visit *********** to read more about us and learn about the impact of our solutions across the globe.

Join Reynolds Consumer Products…and Drive Your Career across a world of opportunities! We provide amazing job opportunities for growth with competitive salaries and benefits in an exciting, dynamic, fast-paced, and high-performance organization. If you are looking to build a strong career? Then we have an opportunity for you! We are searching for a Replenishment Analyst to join our team in Bentonville, Arkansas. Responsibilities Your Role: The Replenishment Analyst works in concert with the Replenishment Manager to impact business integration, technology and planning specifically related to auto replenishment, inventory planning, and aggregating forecasts. A key component of this position is maintaining store/club in-stocks through planning and collaboration with key customer contacts as well working with the demand planning manager in forecasting duties. You will have the opportunity to Make Great Things Happen! Drive sales growth through the execution of maintaining in-stocks at store/club and customer DC. Develop forecast reasonableness factors based off demand history including sell through and shipment data. Continually evaluate performance against established scorecard for the retailer Ensure the best forecast methods and tools are employed to support our businesses Partner with Walmart/Sams replenishment manager on seasonal strategies to maximize sales and in-stocks during seasonal periods Reviews historical sales trends, research demand drivers, and develops statistical forecast models at brand/sku level with the best tools and information available. Performs all duties of a customer logistics analyst Works closely with the sales team responsible for each business category to understand what is transpiring within the account as it relates to inventory demand You will love it here if… You put safety first, always. You listen, learn, and evolve. You are passionate about collaboration, teamwork, and achieving shared goals. You treat all people with respect, operating ethically, and embrace inclusivity. You are committed to improving our impact on local communities. Qualifications We need you to have: Bachelor's Degree or equivalent experience within the retail account. Minimum of 2 years experience working within replenishment Systems and data entry analysis Prior Walmart/SAMs Club experience preferred Excellent written and verbal communication skills with the ability to communicate and influence at all levels within the organization. Self-directed with the ability to work in a fast-paced environment with multiple accountabilities and multiple internal customers. Strong analytical skills as well as organizational skills with high attention to detail. Ability to work a flexible schedule during key business deadlines. Must be team oriented with the ability to work on high collaboration and performance team Proficient in MS Office. If you answer yes to the following…we want to meet you! Intellectual Curiosity: Do you have an inquisitive nature? Problem Solving: Do you have a knack for tackling issues head-on? Entrepreneurship: Do you enjoy taking ownership of your work? Customer Centricity: Do you always act in the best interests of the customer, putting their needs first? Growth Mindset: Do you focus on progress rather than perfection? Continuous Improvement: Are you never satisfied with the status quo? Want to know more? Check out our website or connect with us on LinkedIn! Apply today to join a fast-growing innovative company! Not a good fit but know someone who is? Please refer them! Local candidates only, no relocation assistance available Join Reynolds Consumer Products and Drive Your Career across a world of opportunities! For applicants or employees who are disabled or require a reasonable accommodation for any part of the application or hiring process, you may request assistance by emailing us at ******************************. No recruiter calls or emails please. RCP affords equal employment opportunities to applicants without regard to race, color, religion, age, disability status, sex, marital status, protected veteran status, pregnancy, national origin, genetics, genetic information, parental status, or any other characteristic protected by federal, state or local law. RCP conforms to the spirit as well as to the letter of all applicable laws and regulations. Posted Salary Range USD $75,000.00 - USD $90,000.00 /A

This position provides daily and long-range supervision and direction in maintaining and improving conditions of the golf course at the Ridges at Village Creek golf course. Job duties include supervising the golf course maintenance staff, providing on-site supervision of mowing, watering, and fertilizing of the golf course, supervising equipment maintenance and repairs, preparing and approving work schedules, training staff, constant monitoring of turfgrass systems during the growing season, ensuring proper water, nutrient, and disease prevention levels and operation and maintenance of pumping and irrigation systems - including program scheduling, assisting in repairs and winterization. Must have knowledge of usage and application of fertilizers, fungicides, insecticides, herbicides, and miscellaneous chemicals such as surfactants and growth regulators. Must possess or be able to obtain pesticide license within 3 months of employment. Must be a member in good standing with the GCSAA and/or PGA of America. Applicant must be able to work a varied shift including weekends and some holidays. A driver's record check will be performed. Position offers a full benefit package including paid holidays, annual and sick leave, health insurance, retirement pension and golfing privileges. Minimum Qualifications : Minimum of three years of facility management experience, including at least one year in a supervisory role. Preferred Qualifications : experience in turf management or related area, and two years in a managerial or supervisory role. Applicants with a college degree in agronomy, horticulture or related field and specialized training in turf management are preferred. EOE/AA/ADA - Women and minorities are encouraged to apply. Applications accepted online only: ****************************** Please visit us on the web at ************************** to find out more about us.

Your Opportunity as the Associate Lead, Category Leadership - Walmart Advisory Analytics Key contributor to Walmart Category Advisory Team. Expert in data analytics, retail strategy, and bringing business-building concepts to life in store and online. Go-to expert to build insightful data stories, reporting, and visualizations. Builds trusting relationships with Walmart, working closely to activate key components of category strategy. Location: Bentonville, AR (JMS Regional Walmart Office) Work Arrangements: Hybrid - onsite a minimum of 2 days per week In this role you will: Customer Category Management Assist in the development and implementation of Customer specific Category Leadership Plans (CLP) and 4P tactical solutions Identify key business trends and synthesize for customer application Identify opportunities and issues and support the Category Advisory team to implement solutions at retail Provide broad insights to support customer initiatives Understand the competitive marketplace in which JMS and customers operate Communicate insights and learnings to the customer merchandising team Actively participate in retailer calls Collaborate and influence across the various Strategic Business Areas (SBAs) The Right Place for You We are bold, kind, strive to do the right thing, we play to win, and we believe in a strong community that thrives together. Our culture is rooted in our Basic Beliefs, and we believe in supporting every employee by meeting their physical, emotional, and financial needs. What we are looking for: Minimum Requirements: Bachelor's Degree 4+ years of relevant Consumer Packaged Goods experience 2+ years of Category Management experience Experience leveraging Circana or AC Nielsen data Experience leveraging Scintilla Planogramming / Planogram software experience (JDA Prospace) Experience building relationships with customers / retailers Strong analytical skills, problem solving and storytelling experience Ability to translate insights into actions Strategic mindset to help build and execute effective plans Ability to travel up to 15% Additional skills and experience that we think would make someone successful in this role (not required): Luminate Charter experience ShelfIQ experience Experience with Tableau and/or other data visualization tools from a reporting perspective Learn more about working at Smucker: Helping our Employees Thrive Delivering on Our Purpose Our Continued Commitment to Ensuring a Workplace for All Follow us on LinkedIn #LI-Hybrid

Competitive Compensation: Starting at $20.00 per hour, with an additional $1.00 per hour for 2nd shift. Shifts Needed: * Weekends -1st Shift, Friday, Saturday & Sunday,5:00am-5:00pm * 1st Shift: 5:30AM-4:00PM, Monday-Thursday * 2nd Shift: 4:30PM-3:00AM, Monday-Thursday Opportunity Are you ready to build a career you can be proud of? Kohler Co. manufacturing teams are hiring! We're looking for passionate individuals to join a culture dedicated to safety and innovation, with opportunities for advancement within our Sheridan location. We are looking for Material Support 1 Operator in our Supermarket department within the Faucets Division. This position will be based at our Sheridan, AR location, where we specialize in manufacturing high-quality kitchen and bathroom products, including faucets, sinks, showers, and lighting. Crafting Excellence: Your Responsibilities * Pulls orders to move, gather, or distribute products to internal and external customers. * Pulls materials and items from receiving areas to storage areas or to other designated areas. * Sorts and places materials or items on racks, shelves, or in bins according to predetermined sequence such as size, type, style, color, or product code. * Assembles customer orders from stock and places orders on pallets or shelves or conveys orders to the packing station or shipping dock staging area. * Marks materials with identifying information. * Opens bales, crates, and other containers. * Records amounts of materials or items received or distributed. * Weighs or counts items for distribution. * Arranges stock parts in specified sequence. * Enters records in the computer. * Prepares parcels for shipping. * Maintains inventory records. Ready to make a bold impact? Here's the qualifications we are looking for: Key Qualifications * Must be able to work in the US without restrictions or sponsorship. * Effective communication skills for manufacturing production processes. * Must be at least 18 years old. Preferred Qualifications * Minimum of 1 year manufacturing, industrial, or warehouse experience. * High School Diploma or Equivalent. * Able to work above ground level while operating a powered industrial vehicle. * Forklift experience * Order Picker, Reach Truck experience is preferred. * Forklift Certification: In-house certification is required post-hire consisting of 3-day powered industrial vehicle training, medical questionnaire, and eye exam. Why You'll Love Working Here * Health insurance with premiums as low as $20 per month, dental and vision insurance, and company-paid disability and life insurance. * 401k plan with company match and voluntary benefits such as identity protection and pet insurance. * Pension Plan. * Up to 10 paid holidays annually after 60 days and up to 2 weeks of paid vacation in your first year. * Discounts on Kohler products. * Tuition assistance for advanced education. * Opportunities for growth and career advancement. Additional Requirements * Physical Capability: Ability to perform the essential duties of the position, including bending, lifting, and pushing weights of up to 35 pounds or more. * Screening: Successful completion of a drug screen and background check. * Reliability: Consistent attendance and work performance. * Safety Compliance: Follow all safety policies and procedures. Applicants must be authorized to work in the US without requiring sponsorship now or in the future. The hourly range for this position is $20. The specific hourly rate offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. Available benefits include medical, dental, vision & 401k. We believe in supporting you from the moment you join us, which is why Kohler offers day 1 benefits. This means you'll have access to your applicable benefit programs from your first day on the job, with no waiting period. Why Choose Kohler? We empower each associate to #BecomeMoreAtKohler with a competitive total rewards package to support your health and wellbeing, access to career growth and development opportunities, a diverse and inclusive workplace, and a strong culture of innovation. With more than 30,000 bold leaders across the globe, we're driving meaningful change in our mission to help people live gracious, healthy, and sustainable lives. About Us It is Kohler's policy to recruit, hire, and promote qualified applicants without regard to race, creed, religion, age, sex, sexual orientation, gender identity or expression, marital status, national origin, disability or status as a protected veteran. If, as an individual with a disability, you need reasonable accommodation during the recruitment process, please contact *********************. Kohler Co. is an equal opportunity/affirmative action employer.

Full-time Description ob Purpose: The Welder Helper will assist the welders in various tasks related to metal fabrication and welding operations. The ideal candidate will support the welding team by preparing materials, maintaining equipment, and ensuring a safe and efficient work environment. Key Responsibilities: · Assist welders in setting up and operating welding equipment · Prepare materials for welding by cleaning, cutting, or grinding metal surfaces · Transport tools, materials, and equipment to and from work areas · Maintain cleanliness and organization of the worksite · Monitor welding operations to ensure safety and quality standards are met · Perform basic measurements and mark materials for cutting or welding · Help with post-welding tasks such as inspecting welds and cleaning finished products · Follow safety protocols and wear appropriate protective gear at all times Requirements Required Skills/Abilities: · Understanding of welding processes, tools, and safety procedures · Ability to work with hand and power tools, and assist in equipment setups · Capable of lifting heavy materials, standing for extended periods, and working in various environmental conditions · Ability to follow instructions precisely and ensure quality in material preparation and cleanup · Familiarity with measuring tools such as tape measures, calipers, and squares · Knowledge of workplace safety standards and the ability to identify and avoid hazards · Ability to work effectively with welders and other crew members · Efficient in completing tasks within deadlines and maintaining productivity Education and Experience: · High School diploma or equivalent preferred · Previous experience in a construction or metalworking environment is a plus · Willingness to learn and grow within the welding trade Physical Requirements: · Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature occasionally. · May involve working outdoors or in industrial environments · Exposure to heat, noise, and fumes · Use of protective equipment such as gloves, goggles, and welding masks · Must be able to bend at waist and knees and stand for extended periods of time. · Must be able to lift 25 pounds when necessary. · This is a safety sensitive position.

The Bagger position is required to operate a bagging machine to properly fill bags with product, ensure proper labeling and weight, and ensure bags successfully pass through a metal detector before leaving the bagging area. The position may also be required to perform other tasks or duties as assigned by the shift supervisor or the department manager 3rd Shift (11pm -7am) Benefits: Medical Insurance Prescription Drug Plan Dental/Vision Insurance Employee Incentive Plan Flexible Spending Account Cash Accumulation Plan-401K Life/AD&D Insurance Short- Term/Long-Term Disability Vacation Plan Paid Holidays Employee Assistance Program Adoption Assistance Program Tuition Reimbursement Maternity/Paternity Leave Pet Insurance Essential Functions: Ensure batch numbers and product code on the labels match with the product been dumped Make sure metal detector in good working condition. Stack bags neatly on skids as required and on the correct skid color. Return any unused label back to the operator so that it can be recorded. Clean machine and work area as required. Detect any malfunction of metal detector and rollers and report it to the supervisor. Comply with all safety requirements and company policies. Report all shortage to the lead operator. Other duties as assigned by supervisor. Qualifications: High School Diploma or GED equivalent. Knowledge about manufacturing food preferred Able to communicate well, both verbal and written, also with good mathematical skills Able to lift 50 lbs. continuously Work Environment: The job is performed in production areas where the person will be exposed to strong aromas, airborne dust particles emanating from ingredients being used, and will be in the presence of or otherwise operating machinery. Disclaimer: The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. New Weds Foods is an Equal Opportunity Employer. Newly Weds Foods will only employ those who are legally authorized to work in the United States without assistance or support from Newly Weds Foods. Any offer of employment is conditional upon the successful completion of a background investigation and drug screen.

ESSENTIAL FUNCTIONS Always follow and help enforce safe practices and rules Climb, prune, and remove trees according to Foreperson's directives Load and unload trucks with logs, brush, and debris; lifts and feeds brush into brush chipper. Work from the ground using hand saws, pole saws, pruners, hand pruners, loppers, and gas-powered chain saws Inspect and ensure proper working condition of all assigned tools and equipment Safeguard employees and public from hazards in and around the work area by enforcing safe job practices, keeping work area clean and orderly, and staying in frequent voice communication with co-workers Perform duties for storm work as needed SUPERVISORY RESPONSIBILITIES Climbers have no direct reports. EXPERIENCE REQUIREMENTS Prior experience in electric utility vegetation management, construction, logging, landscaping, mechanical, or military industries preferred; previous climbing experience is preferred EDUCATION REQUIREMENTS High School diploma or education equivalent preferred KNOWLEDGE, SKILLS, AND ABILITIES Must be able to demonstrate a working knowledge of all knots, ropes, and rigging devices used in tree trimming and removal operations Must be able to climb and descend trees using rope and safety saddle Must be able to administer and implement emergency rescue techniques, including tree rescue and all applicable first aid techniques Must be familiar with electrical hazards and appropriate operating procedure when in proximity to electrical conductors and aerial rescue techniques in the event of an emergency aloft Must be able to work and maneuver at considerable heights under varying and adverse weather conditions Must possess physical strength and agility, good balance, good depth perception and the ability to hear verbal instructions from a distance. Must be able to quickly remove yourself from a potential danger area Must be able to obtain and maintain first-aid certification and CPR Must be able to wear necessary personal protective equipment (PPE) Must be able to travel out of town for storm restoration work when needed Work authorization requirements: Must meet I-9 requirements. Affirmative Action/EEO statement: Xylem Tree Experts and Kendall Vegetation Services provide equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, obligations, and activities may change at any time, with or without notice. Benefits Offered: This is a full-time position that offers health insurance benefits for medical, vision, and dental, as well as the option for enrollment in a 401K.