Service technician jobs in Berwyn, IL - 7,545 jobs

Min USD $15.50/Hr. Max USD $21.44/Hr. Join Our Team at Springfield Memorial Hospital! Are you looking for a meaningful role where you can make a difference every day? As an Environmental Services Technician, you'll play an essential part in maintaining a clean, safe, and welcoming environment for our patients, visitors, and staff. In this role, you'll be responsible for daily cleaning and restocking throughout the hospital and its facilities, following the standards set by our Environmental Services and Infection Prevention and Control departments. These positions do require an every-other-weekend commitment as part of our regular scheduling. We currently have multiple shifts available. (Openings are reviewed regularly based on the needs of the department and are subject to change.) Qualifications Education: High school diploma or equivalent preferred. Other Knowledge/Skills/Abilities: Ability to lift objects and climb ladders. Moderate physical effort required. Responsibilities Understands how soiling occurs and the difference between soluble and insoluble soils, and the cleaning process involved. Maintains a clean, stocked, and organized cleaning cart and Environmental Services closet per department policy. Knowledgeable about the specific use of Environmental Services chemicals and their dilution rates. Performs dust mopping and wet/microfiber mopping on hard surface floors. Vacuums carpeted areas using an upright vacuum cleaner. Handles and disposes of all waste streams, including regulated waste in the hospital. Cleans and handles intravenous pumps (IV or Sigma Smart Pumps). Cleans in-patient rooms daily. Implements A.I.D.E.T. (Acknowledge, Introduce, Duration, Explanation, Thank You) and Greet and Feet techniques, understanding their impact on patient surveys. Performs discharge and transfer cleaning in both in-patient and out-patient settings. Follows isolation cleaning procedures, using appropriate Personal Protective Equipment (PPE). Responsible for cleaning offices, conference rooms, and furniture arrangement. Proficient in cleaning procedures for laboratory settings. Routinely cleans public and non-public restrooms and locker rooms. Conducts between-case and terminal cleaning in special procedure areas. Cleans the pharmacy clean (IV) room. Reports facility repair issues (e.g., wall patching, ceiling tiles, leaks) to leadership and submits work orders as needed. Maintains all equipment (cleaning carts, vacuums, pagers) following department guidelines. Performs general maintenance of hard and soft flooring. Adheres to safety procedures with chemicals and equipment use; reports discrepancies. Reports injuries to leadership and submits appropriate injury reports. Completes all duties proficiently and within designated time frames. Participates in required training, meetings, and completes annual learning modules on time. Familiar with departmental policies and procedures, monitoring communication boards. Performs other related work as required or requested.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Extensive travel required. (Local, National) · Promotes and adheres to the ATS safety culture. · Engages in various work environments and industries to lead reliability centered maintenance efforts. · Mentors, coaches, and provides reliability best practices for applications in customer facilities, by customer personnel · Identifies top potential issues leading to lost production and preventable maintenance spending. Communicates findings with leadership. · Provides solutions to root cause deficiencies and demonstrates economic benefits to their correction. · Actively drives the implementation of equipment improvement projects. · Identifies and implements current and new processes / technologies to increase equipment performance and uptime · Champions systems and best practice procedures towards a proactive manufacturing culture. · Analyzes equipment performance, failure data, and corrective maintenance history to develop and deploy engineering solutions, improved maintenance strategies, preventative maintenance optimization, and other reliability techniques. · Provides technical service to operations and manufacturing personnel on equipment related troubleshooting efforts. · Utilizes predictive, preventative, and precision maintenance technologies and strategies designed to identify or control risks prior to failure and ensure optimum maintenance execution. · Collaborates with the maintenance team to prioritize assets and actions by determining failure probabilities and evaluating the risk of compliance, supply, strategy, and cost. · Provides training and coaching in Root Cause and Reliability Analysis and takes ownership for ongoing corrective action tracking, implementation and follow up to ensure that all Root Cause Analysis projects are documented. · Ensures compliance with regulatory requirements and ATS policies and procedures. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Bachelor's degree in engineering (ABET accredited) · Eight or more years of reliability experience across 2 or more manufacturing sites · Demonstrates ability to perform full array of reliability tool sets · Strong technical understanding of electrical or mechanical components, tools, and designs · Ability to complete a failure mode effects analysis, cause and effect diagrams, root cause failure analysis, life-cycle costing, and risk analysis · Ability to research and apply new equipment technology / trends · Robust problem solving, mathematical, analytical, and decision making skills · Proficiency with computers, maintenance systems, and applications, including Microsoft Office · Excellent verbal communication, facilitation, and presentation skills · Strong reporting and technical writing capability · Ability to build and maintain positive, professional relationships Desirable KSAs: · Desire to develop into a leadership role · Experience with data trend analysis, vibration analysis, motor current analysis, oil analysis, lubrication and hydraulic testing, laser alignment, nondestructive testing, infrared thermography, ultrasound technology, acoustic reliability technology, Weibull analysis, and Six Sigma or Lean Manufacturing methodologies · Knowledge of various government regulations such as, Current Good Manufacturing Practice (cGMP), National Electrical Testing Association (NETA), Environmental Protection Agency (EPA), and Occupational Safety and Health Administration (OSHA) · CMRP certification · Green Belt certification · STS certification Competencies: · Drive & Motivation · Interpersonal Skills · Task Management · Strategic Skills · Customer Focus · Self-awareness · Management & Leadership Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $50.96 - $65.19 USD ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. (****************************************************************************************************** ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here. (******************************************************************************************************

About the Company HSG Tech Inc. is an American Subsidiary of HSG Laser who is a fast-growing supplier in the global metal forming solution industry. We believe intelligent manufacturing changes future. Customers in 100+ countries have used and recognized our equipment and service. Please visit the web site for details about HSG: **************** About the Role The Service Engineer position is the primary point of contact responsible for training, installation and maintenance of all HSG tech machinery in our Chicago showcase space and equipment purchased by HSG Tech customers in the US region. Reporting directly to the Service Manager in the US, this position will manage technical issues, maintain customer satisfaction, provide monthly maintenance support, promote value add-on services and provide training support. Business travel will be a requirement for this position. Responsibilities Provide key objective management (proper machinery installation, proper accessory management and proper understanding of service data) Optimize work order organization, safe tool use and customer data reporting. Demonstrate understanding of expense reimbursement documentation and customer service evaluations Partner with internal Sales, Marketing, Finance, Customer Service and R&D teams to support stakeholder objectives On-time completion of equipment installation, commission and maintenance tasks while following the company's strict safety and quality guidelines Analyze and find root cause of maintenance impediments, debug system errors and propose system improvements. Participate and prepare company held trainings regarding technical process, company regulation and technician job duties. Conduct customer visits monthly for routine service maintenance while promoting related value add-on services. Provide one-to-one training and guidance for new hired service team members. Qualifications Two years of working experience in related industry (Fiber Laser experience highly preferred) Technical know-how: installation, debugging and maintenance on 6KW equipment Comprehension of circuit diagrams Familiar with CAD or SOLIDWORKS design software Familiar with mechanical principles Detail & deadline-oriented; well organized Excellent verbal and written communication skills Good interpersonal skills; ability to interact with staff across matrix partners Electrician's certification Fitter's certification Job level and pay is dependent on experience. Pay ranges and level progressions: Service Technician ($29-35 hourly) Service Engineer ($36-41 hourly) Senior Service Engineer ($42-48 hourly) HSG is committed to ensuring equal employment opportunities to all qualified persons without regard to race (including associated hairstyles), color, religion, sex, gender identity, sexual orientation, national origin, ancestry, citizenship status, age, marital status, genetic information, military status, unfavorable discharge from military service, order of protection status, pregnancy, arrest record, disability, or any other status protected by applicable law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. HSG participates in E-Verify and conducts pre-employment drug testing and background checks as part of our hiring process.

Do you want to make a difference in the lives of others? Your skills, experience, and passion are needed on our team. We are looking for new on-call team members to join us, at our Crisis Recovery Center, to work as Crisis Services Technicians. This is an exciting opportunity to part of the expanding crisis services at the DuPage County Health Department! Located in our new Crisis Recovery Center on the DuPage County Campus in Wheaton, Crisis Services provides 24/7 crisis mental health services to county residents experiencing psychiatric crises or needing support for mental illness symptoms. Our team delivers top-notch care with rapid response times. Click to learn more about the Crisis Recovery Center. In this on-call position, you will be required to work at least three (3) shifts per month, having evening and weekend availability, working no more than 1000 hours per year. We offer a $2.00 per hour shift differential for our second shift and $2.50 for our overnight shift. Responsibilities Supports maintenance of a safe, therapeutic environment for clients seeking services through Crisis Recovery Center programs on the Substance Use Stabilization Unit, Adult Mental Health Unit, and Youth Mental Health Unit, as well as in Crisis Residential. Facilitates client safety and quality care in Crisis Residential and Crisis Recovery Center Programs, through completion of client rounding and belongings checks Assists with client medication observation in Crisis programming as needed Performs tasks related to maintaining environmental standards in crisis programming Assist in de-escalation of clients experiencing a mental health crisis through engagement with client and coordination with team members providing clinical intervention. Completion of required documentation within established timeframes, through use of an Electronic Client Record Participates in team meetings to assess clients' progress. Participates in emergency response activities as assigned. Requirements A qualified candidate must possess a valid State of Illinois Driver's license and have a good driving record. New employees are required to attend paid on-site, HR New Hire Orientation at our Central Public Health Center in Wheaton, during our day shift generally, from 8:00 am to 4:30 pm, for one week. Must have flexibility to work on the day shift for two weeks of additional training on site at the CRC. Must be 21 years of age. Experience preferred, but not required While performing the duties of this job, the employee must be able to stand, walk, use hands to push and pull cleaning equipment, reach with hands and/or arms, climb ladders, crouch or stoop, and lift or move up to 10 pounds. Salary $17.00 Hourly Job Type On-Call Service Unit Behavioral Health Services Department Emergency Services

LHH Recruitment Solutions has partnered with a growing organization, and they are seeking a motivated Maintenance Mechanic / Field Technician - Multi-Site Plastics Manufacturing to join their team. This is a unique opportunity for a hands-on professional who enjoys traveling and solving complex challenges in state-of-the-art production facilities. Why Consider This Opportunity? Travel & Variety: Support multiple advanced plastics plants across the U.S. and Canada. Approximately 70% travel-perfect for those who love new challenges and environments. Growth & Innovation: Work alongside senior engineering and maintenance teams, contributing to continuous improvement and automation projects. Impact: Play a key role in ensuring operational excellence, safety, and reliability in high-volume manufacturing settings. Key Responsibilities: Troubleshoot, repair, and maintain hydraulic, pneumatic, and electrical systems (including 480V 3-phase). Support installation, upgrades, and relocation of production equipment. Collaborate with engineering and plant maintenance teams to deliver projects on time and within budget. Apply TPM (Total Productive Maintenance) methodologies to drive efficiency and minimize downtime. Identify and implement system improvements to optimize automation and production performance. Maintain accurate project documentation and technical records. Ensure strict adherence to safety protocols during all on-site activities. Qualifications and Skills: Bachelor's Degree preferred; relevant certifications or technical degrees considered. 3+ years as a maintenance mechanic or field technician experience. Proven expertise in hydraulics-especially in plastic blow molding or injection molding environments. Exposure to PLCs (Programmable Logic Controllers). Ability to read and interpret technical diagrams, schematics, and manuals. Familiarity with AutoCAD and basic drafting is a plus. Willingness and ability to travel up to 70% of the time to support multiple plant locations. Hands-on knowledge of Total Productive Maintenance practices. Compensation Range: $75,000 - $115,000 Benefits Offered: 3 weeks of vacation, paid sick leave where applicable by state law, Medical Insurance, Dental Insurance Vision Insurance, 401K, and Life Insurance. If you are a passionate Maintenance Mechanic / Field Technician looking for a new and rewarding career, please apply today! You don't want to miss out on this opportunity! LHH is a leader in permanent recruitment-and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn't a perfect match. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit **************************************

General inspection, calibration, troubleshooting, repair, test, and maintenance of all types of HVAC, electrical, lighting, fire, life, safety, and facility systems. Provide additional facility maintenance services including carpentry, plumbing, painting, snow removal, and CMMS system data entry to maintain client's building infrastructure and grounds in a commercial office facility. SUMMARY OF ESSENTIAL JOB FUNCTIONS AND RESPONSIBILITIES: Inspect, calibrate, maintain, troubleshoot, test, and repair all types of facility systems including HVAC, electrical, lighting, fire, life, safety, boilers, refrigeration units, compressors, motors and pumps and all associated controls and provide facility maintenance services including carpentry, plumbing, painting, landscaping and snow removal to maintain client's building infrastructure and grounds. Attend and/or participate in safety training per C&W SERVICES policy Perform routine inspection, preventive maintenance, calibration, functional and operational testing of facility systems and equipment. Utilize CMMS computer system to document tasks performed and maintain equipment histories including parts replaced, hours worked, time to respond, and time to complete. Responsible for completing and data input for all assigned work orders (both corrective and PM) in a timely manner. Maintain equipment, tools, and work areas in a clean, safe and orderly manner. Utilize and have a general understanding of national and local codes for equipment repair. Perform all work in accordance with OSHA, state and municipal requirements and C&W SERVICES safety policies. Perform quality work and regularly communicate repair status of devices and systems to supervisor/Manager. Must be able to work with informal and formal teams, with other employees and customer representatives from various departments demonstrating a professional demeanor at all times. May be required to work with and coordinate activities of other vendors including specialists Perform all other tasks as assigned by supervisor/Manager in response to the needs of the client Perform daily survey of buildings to identify repair and preventive maintenance tasks. Report to supervisor/Manager on a regular basis (daily/weekly) on conditions relative to general operations. Responsible for participating, seeking and coordinating training and continued professional development in the areas of advancing technology, safety, and general skill improvement. Available for ON CALL duty on nights, weekends and holidays to address emergencies Possible flexible hours to accommodate client needs Pay/Work Hours/Location: Up to $30 per hour 1st Shift Elmwood, IL SUPERVISORY RESPONSIBILITIES, if any: Not applicable to this position PERFORMANCE GOALS: Safety - follow C&W SERVICES safety policy and participate in all required training and related programs Cost - assist account leadership to meet financial targets Quality - meet goals as outlined in the SLA's for work completion, callbacks and customer service issues Delivery - follow work order and services delivery processes QUALIFICATIONS: To perform this position successfully, an individual must be able to perform each job duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. Good general working knowledge of all trades Proven mechanical ability and aptitude. Good computer skills are required; operating knowledge and trouble-shooting of equipment via Building Management System preferred. Proven ability to work cooperatively with others. Demonstrates attention to detail Understands business implications and decisions Develops and implements cost saving measures Conserves organizational resources 2-5 years related experience and/or training at a semi-skilled level of experience of general maintenance in a commercial facility setting or equivalent combination of education and experience. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished by supervisor/Manager in written, oral, diagram or schedule form Increase knowledge and operation of specialized equipment through study of all manufacturer manuals and installer instructions. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to perform the following physical activities during a normal work-day: stand, walk, sit, use hands to finger, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl, climb or balance, talk, hear and smell. Must be able to lift up to 75 pounds 1/3 of time at work. Must have the following vision requirement: close vision, distance vision, color vision, and depth perception WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to perform duties under the following environmental conditions Work near moving mechanical parts, work in high, precarious places with potential exposure to work environments containing fumes or airborne particles, toxic or caustic chemicals, outdoor weather conditions, extreme cold and heat (non-weather), risk of electrical shock and occasional loud noise

As a Maintenance Technician, you'll be responsible for completing work orders and assisting with the day-to-day upkeep of our apartment community. You'll work directly with residents to resolve maintenance requests submitted through AppFolio, ensuring repairs are handled efficiently and professionally. In this role, you'll handle a wide range of maintenance tasks to keep our community running smoothly. That includes responding to and completing resident work orders through AppFolio, performing repairs on plumbing, electrical, HVAC, appliances, and carpentry as needed, and taking care of routine upkeep like lighting, locks, painting, and general property repairs. You'll also assist with unit turns between residents by handling make-ready repairs and cleaning, troubleshoot and address any emergency maintenance issues (with possible on-call rotation), and help maintain an organized inventory of tools, supplies, and equipment-all while providing friendly and respectful customer service to residents and coworkers.

Maintenance Mechanic The Mechanic will perform preventative maintenance & emergency repairs to all packaging machinery, striving to improve equipment reliability & quality, as part of the maintenance team. Duties and Responsibilities: Fill out daily log reports, emergency breakdown reports, work orders, and communicate with incoming shifts. Perform machine set up and repair assembly and packaging equipment. Perform preventative maintenance routines on all production equipment. Ability to work on low voltage and 120-480vac equipment, starters, motors, vfd's, sensors, controllers, photo-eyes, etc. Install, debug and stabilize plant equipment as required. Read schematics and blueprints to interpret, diagnose, and troubleshoot electrical and pneumatic issues to properly and safely repair. Perform repairs and upgrades of the machinery and equipment to ensure proper operation. Install electronic parts and hardware, using soldering equipment and hand tools Assist in Production/Maintenance related assignments as needed. Communicate regarding issues and problems solve with Production staff any quality and safety concerns. Perform electrical and distribution lock out/ tag out method steady with customary safety protocol. Record maintenance data as directed by the Maintenance supervisor to monitor equipment performance, i.e. work orders Identify and report equipment concerns to the Maintenance Supervisor. Participate in overtime assignments as required. Mechanic is required to supply their own hand tools and a lockable toolbox. Working in a general manufacturing environment. Perform various other similar and related duties as required by the Plant Manager. Qualifications: Experience in equipment maintenance Experience with Pneumatics, Hydraulics and Electrical Ability to withstand wet, cold (35-40F), humid and hot environments, Must be able to bend, reach, kneel, stand for extended hours, Must be able to climb ladders, Must be able to move heavy objects. Must have experience with the following machines: Tiromat packaging machines & Drake Loaders Meat processing facility knowledge. 5 plus years' experience preferred. PPE/Tools Safety toe footwear Hairnet, beard net (if applicable), bump cap, frock If needed: safety glasses, hearing protection, rubber boots Safety Expected to work continuously in a safe manner, and to encourage others to work in a safe manner Expect to maintain good housekeeping, and report any unsafe conditions Food Safety/Quality Adhere to all GMP's (Good Manufacturing Practices), such as a good hand washing practices and adhering to employee hygiene plan Follow all USDA guidelines Report any issues regarding food safety or quality Disclaimer Statement The information contained in this job description is intended to describe the essential job functions required of those assigned to this job. It is not intended to be an exhaustive list of all accountabilities, activities, skills, and knowledge needed to perform the job. Please note that job functions are reviewed periodically and are subject to change based upon company business needs. Bobak Sausage Company is an Equal Employment Opportunity Employer.

Company is seeking a Maintenance Technician II to assist with maintaining an industrial laundry facility. Responsibilities include assisting with repairing, maintaining, installing and troubleshooting industrial equipment, systems and components incl Maintenance Technician, Technician, Maintenance, Manufacturing, Healthcare, Industrial

Day Shift: 6:00am-2:30pm Reporting to the Manufacturing Engineer, the Industrial Maintenance Tech will be responsible for shift support for all electrical/mechanical problems that might arise with equipment/facilities as well as completing all predictive and preventative maintenance work. This position would also be responsible for all machine management and maintenance across the fabrication department and would lead special projects to both equipment/facilities and systems development. Essential Duties and Responsibilities include the following, as well as other duties may be assigned. Follow all safe work practices and procedures. Wear all prescribed personal protective equipment. Ensure all proper lockout/tag out procedures are followed. Provide shift support for all electrical/mechanical and technical problems Install, maintain, remove, troubleshoot, and diagnose a wide variety of electrical/mechanical equipment and components used in manufacturing process. Troubleshoots, repairs, and maintains a variety of production machinery and equipment including electrical, mechanical, hydraulic, and pneumatic systems and parts. Installs, modifies, and relocates machinery and equipment and performs fabrication, welding, mechanical, electrical, electronics, plumbing, carpentry, or other maintenance skills. Repairs and modifies buildings and plant systems as required. Troubleshooting and repair of components such as rolls, shafts, bearings, drive belts, drive chains and gear boxes utilizing basic mechanics hand and power tools Troubleshooting and repair of pumps, valves, and piping systems to include installation of coper pipes or PVC pipes. Reads and interprets manuals, schematics, blueprints, drawings, and other written installation and repair instructions Identify and complete predictive and preventative maintenance work and weekly mechanical press inspections Machinery includes NC Turret Presses, Waterjet, Press Brakes, Routers, Welders, Drill Presses, and hand power tools. Manage backlog of work orders. Maintain Maintenance Area tools and equipment. Maintain and organize all toolboxes, workspaces, and maintenance specific equipment. Perform other duties as required to maintain or improve plant reliability. Conduct daily safety risk assessments on routine and non-routine job tasks. Lead systems development work such as standard work, training, and housekeeping initiatives throughout the plant. Travel: Minimal; less than 5% Qualifications & Experience: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High School or GED education required (Diploma or GED). 3+ Years of Mechanical experience in an industrial environment. Bilingual in English and Spanish is preferred. Machining and fabrication experience. High level experience troubleshooting manufacturing equipment. Welding, machining, and fabrication skills. Demonstrated skill in working with conveyors, mechanical drive systems (gearboxes, sheaves, pulleys, belts, bearings, sprockets, and chains), pumps, hydraulics, and pneumatics. Ability to perform precision tasks including alignments using lasers, dial indicators, etc. Physical Demands The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 25 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Plant Environment This position operates in a manufacturing setting and can be subject to extreme cold and hot temperatures; uneven walking surfaces with cords, tools, and other obstacles; intermittent loud noises; and dusty or dirty conditions. Required PPE includes: Hard hat (when required), safety glasses, earplugs, steel toe/composite boots, cut sleeves/cut resistant gloves and fall protection. Education and/or Experience

Prepare vehicle records and report both manually and on a computer. Perform safety inspections of equipment and prepare safety documentation required. Inspect and perform work on the under parts of vehicles. Access any area of the equipment or vehicl Technician, Trailer, Vehicle, Automotive, Transportation

Effective Date 12/31/2025 Job Band B08 Job Purpose This is a role for someone who craves a global challenge balanced by the desire to be accountable for delivering against the model in the largest zone in Kraft Heinz. The Head of Technical Services will assess and develop a manufacturing strategy that sets an intended direction for the Manufacturing (OT) and Engineering Network to assure investments work in concert to alter the manufacturing cost curve. This individual will require a unique ideation/problem solving skillset which forces holistic thought about problems rather than problem-solving specific hurdles. This individual will work closely with the Manufacturing Leadership Team to prioritize the cost disadvantaged business segments in need of regaining a low-cost leadership position. It's through the evaluation and deployment of emerging technologies that these cost disadvantaged segments will be repositioned to sustain cost advantages. Essential Functions & Responsibilities * To define a manufacturing strategy as an intended direction which outlines the keys to attaining & retaining low-cost producer status and offers a competitive differentiation. * Alter the boundaries of the existing manufacturing capabilities to offer efficient/rapid new product development * To define strategies on Custom Automation & Innovation * To define strategies and prioritize Obsolescence Capital Planning * To define strategies Cyber security/ SOC * To define/direct stepwise cost reduction programs and/or projects across the Manufacturing Network. * To identify and prioritize opportunities based on the business segment cost needs. * Guide/lead the execution teams through implementation to assure sustainable business results. * Liaison between Manufacturing and Business M&A activities. * Monitor operations metrics and identify opportunities to redefine metrics that better align behaviors with desired Business results * Support the Manufacturing Leadership Team in prioritizing & resolving current technical Manufacturing issues impacting cost. * Team members will act as resident experts within their field of expertise and provide guidance to the broader team on the strategic fit within the Manufacturing Network. * Provide electrical/electronic technology guidance call knowledge and drive necessary changes regarding PLC's, HMI's, drives, controls, safety circuits and communications. * Lifecycle Management - Own and manage the OT Obsolescence CAPEX project portfolio. Identify key projects within the zone that warrant operational technology upgrades to increase operability, efficiency, and security within the manufacturing plants. * Deep electrical systems automation systems knowledge to steer the Network strategy for transformation projects. * Develop project design, scope, cost estimates and timelines for electrical automation systems that aid in transformation automation projects. * Creative electrical and controls mindset anchored in conceptual automation system solutions offering a step change in operational efficiency. * Provide guidance to the project teams and other stakeholders on project management. Expected Experience & Required Skills * Bachelor of Science degree in Engineering or Computer Science * +15 years of manufacturing experience is required with the ability to articulate & implement new technologies and process designs. * Possess a deep understanding of Manufacturing KPIs and electrical capital planning, maintenance reliability, electrical controls & automation and cybersecurity, * 3-5 years in Network Strategy/redesign experience * Able to lead a team (matrix relationship) of Process Managers & highly technical individuals. * Able to influence senior leaders within the Manufacturing Leadership Team * Able to facilitate highly technical statistical approaches to problem solving; gathering and analyzing Network data. * Able to provide mentoring and coaching to seasoned technical Leaders / professionals Work Environment & Schedule This position is considered a Field based environment; role requires frequent travel to customer locations, stores, manufacturing facilities, etc. Additionally, travel will be required up to 60% of the time. This job description is not designed to cover or contain all duties or responsibilities that are required of the role. Duties or responsibilities may change or be added with or without notice. Our Total Rewards philosophy is to provide a meaningful and flexible spectrum of programs that equitably support our diverse workforce and their families and complement Kraft Heinz' strategy and values. New Hire Base Salary Range: $220,800.00 - $276,000.00 Bonus: This position is eligible for a performance-based bonus as provided by the plan terms and governing documents. The compensation offered will take into account internal equity and may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors Long-Term Incentive (LTI): In addition to base salary and bonus, this role is eligible for additional compensation in the form of equity. Benefits: Coverage for employees (and their eligible dependents) through affordable access to healthcare, protection, and saving for the future, we offer plans tailored to meet you and your family's needs. Coverage for benefits will be in accordance with the terms and conditions of the applicable plans and associated governing plan documents. Wellbeing: We offer events, resources, and learning opportunities that inspire a physical, social, emotional, and financial well-being lifestyle for our employees and their families. You'll be able to participate in a variety of benefits and wellbeing programs that may vary by role, country, region, union status, and other employment status factors, for example: * Physical - Medical, Prescription Drug, Dental, Vision, Screenings/Assessments * Social - Paid Time Off, Company Holidays, Leave of Absence, Flexible Work Arrangements, Recognition, Training * Emotional - Employee Assistance Program , Wellbeing Programs, Family Support Programs * Financial - 401k, Life, Accidental Death & Dismemberment, Disability Location(s) Chicago/Aon Center Kraft Heinz is an Equal Opportunity Employer that prohibits discrimination or harassment of any type. All qualified applicants are considered for employment without regard to race, color, national origin, age, sex, sexual orientation, gender, gender identity or expression, disability status, protected veteran status, or any other characteristic protected by law. Applicants who require an accommodation to participate in the job application or hiring process should contact ***********************.

The IT Service Desk Lead is responsible for overseeing daily IT support operations, ensuring efficient service delivery, and driving continuous improvement across the helpdesk function in a Microsoft centric environment. This role serves as a key liaison between end-users and technical teams, ensuring secure, scalable, and premium support for both office and field-based employees. Responsibilities Lead daily IT support operations across office and field teams, ensuring timely resolution of issues and minimal business disruption, utilizing ITIL best practices. Serve as the primary escalation point for complex technical problems and high-priority service requests. Own and evolve ITSM processes (incident, service request, change and problem), document repeatable procedures, and lead support-related projects. Incident Management - Lead incident response efforts by prioritizing and resolving IT issues swiftly, coordinating with support teams to minimize disruption, meet SLAs, and drive continuous improvement through analysis and reporting. Service Request Management - Manage and optimize the service request lifecycle, ensuring timely fulfillment, process efficiency, and alignment with ITIL best practices of user requests in alignment to enhance user experience and operational performance. Change Management - Coordinate and oversee change management activities, ensuring proper assessment, approval, and communication of changes to minimize risk and disruption to IT services. Problem Management - Drive problem management processes by identifying recurring issues, performing root cause analysis, and implementing long-term solutions to improve service stability and reduce incident volume. Lead and report to management on a regular cadence. Project Management - Lead support center projects, integrating new technologies and driving successful implementation. Asset Management - Manage the lifecycle of user-facing technology, maintain accurate asset inventory, and enforce IT security protocols. Take ownership of support issues, engaging other internal / external expertise as required. Ability to communicate complex technical information to all stakeholders, including those who do not have a technical background. Continuously educate employees and equip them with essential IT tools and best practices. Qualifications Associate or bachelor's degree in information technology or equivalent work experience preferred 5+ years of progressive experience in IT support/helpdesk roles Proven supervisory experience with a strong grasp of helpdesk fundamentals-ticketing systems, SLA adherence, and performance metrics; ITIL Foundation knowledge or certification preferred. Advanced capabilities using Microsoft products including Outlook, Excel, Word, PowerPoint, Teams and SharePoint. Knowledge of modern workplace technologies, Windows system administration, M365 administration, enterprise backup and recovery, and system performance monitoring tools; agile project management techniques. Strategic thinker with strong problem-solving abilities, capable of managing multiple priorities under pressure while maintaining attention to detail. High emotional intelligence and discretion, with a proactive and customer-focused approach to anticipating needs and resolving issues. Self-starter with initiative and adaptability, thriving in fast-paced, diverse environments and contributing effectively to team success. Preferred experience with SOX compliance, enterprise desktop management, mobile device management, cybersecurity tools and incident response processes. Competencies: [Examples may include:] Leadership, Interpersonal Skills, High Emotional Intelligence, Independent Judgement, Teamwork / Collaboration, Verbal & Written Communication, Project Management, Microsoft Office Suite, Attention to Detail, Adaptability Working Conditions: This is a hybrid position based in Xeris' Chicago office. A minimum of three days per week in the office is required. On-site requirements may change at management's discretion. Position may require periodic evening and weekend work, as necessary to fulfill obligations. Periodic overnight travel. The level of the position will be determined based on the selected candidate's qualifications and experience. #LI-HYBRID As an equal employment opportunity and affirmative action employer, Xeris Pharmaceuticals, Inc. does not discriminate on the basis of race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, veteran status, genetics or any other characteristic protected by law. It is our intention that all qualified applications are given equal opportunity and that selection decisions be based on job-related factors. The anticipated base salary range for this position is $75,000 to $110,000. Final determination of base salary offered will depend on several factors relevant to the position, including but not limited to candidate skills, experience, education, market location, and business need. This role will include eligibility for bonus and equity. The total compensation package will also include additional elements such as multiple paid time off benefits, various health insurance options, retirement benefits and more. Details about these and other offerings will be provided at the time a conditional offer of employment is made. Candidates are always welcome to inquire about our compensation and benefits package during the interview process NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization.

Warm Greetings! My name is Srinath and I am a Sr. Technical Recruiter with Avance Consulting. We are a leading consulting company and have been in consulting business for last 10 years. We are primary vendors to several Fortune 1000, Investment Banks and Financial companies. I found your resume on one of the job boards and it looks to be a good fit for an open position we have. Please review the listed below. If you are interested, please respond with your updated resume or give me a call on ************ Ext 238 at your earliest convenience. If you are not looking for new roles, please forward this email to someone either from your professional network or friends who are looking for new opportunities since we have an excellent referral program. Hi, I hope you are doing good. I have Opportunity with one of my client, please find below Job Description for your review. If you are interested please forward me your updated resume along with your contact details to discuss further Role:Technology Lead - .NET, WCF/WebServices (RESTful/SOAP) Duration: Full TIme / Permanent Location: Austin, TX / Chicago, IL Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. • At least 4 years of experience with Information Technology. Preferred • At least 3 years of experience in C#.Net, ADO.Net, .Net framework 3.5, ASP.Net. WCF, Webservices • At least 3 years of experience in Agile, Scrum or Kanban Methodologies • At least 3 years of experience in tools such as Jira, Jenkins and Continuous Integration and Continuous Delivery • Knowledge in NO-SQL environment, MongoDB • At least 3 years of experience in software development life cycle. • At least 3 years of experience in Project life cycle activities on development and maintenance projects. • At least 3 years of experience in Design and architecture review. • Ability to work in team in diverse/ multiple stakeholder environment • Experience to Financial Services and Wealth Management • Analytical skills • Experience and desire to work in a Global delivery environment Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. Additional Information All your information will be kept confidential according to EEO guidelines.

Central Transport is one of the nation's most trusted and technologically advanced Less-Than-Truckload (LTL) carriers. With an ever-growing network of terminals nationwide, our team of dedicated professionals provide safe and efficient service to the United States, Canada, and Mexico. Our Growth is Creating Great Opportunities! Our team is expanding, and we want to hire the most talented people we can. Continued success depends on it! Once you've had a chance to explore our current open positions, apply to the ones you feel suit you best and keep track of both your progress in the selection process, and new postings that might interest you! Thanks for your interest in working on our team! Central Transport is an industry leading Less-Than-Truckload (LTL) transportation carrier. We are one of the nation's largest LTL carriers and have experienced significant growth over the last several years. As we continue to expand our network, we are seeking quality mechanics to help maintain our fleet of over 2,200 tractors, 8,500 trailers, and 1,700 forklifts across the United States and Canada. Position Available: * Forklift Service Technician - Performing routine and preventative maintenance on our fleet of electric forklifts* What Central Offers: Industry Leading Pay Medical, Dental, PTO, Paid Holidays Off, Paid Bereavement Leave, Paid Jury Duty Leave, Weekly pay. Now Offering Blue Cross Blue Shield Blue Care Network! Free Uniforms Provided Responsibilities Include: All forklift repairs needed Troubleshoot and diagnose electrical issues Component rebuild and hydraulic repair Perform routine maintenance such as checking batteries, lubricating equipment, and machinery Tire changes Brakes Bolt-on components Job Requirements: 1 year of Forklift Mechanic experience Basic set of tools ASE certification preferred but not required If you're interested and would like to learn more, please call at ************ ext. 2619

Job DescriptionDescription: Service Technician IV The Lead Overhead Crane Service Technician will travel to customer production facilities to inspect, troubleshoot, repair and modify electric overhead bridge cranes and related material handling equipment. MINIMUM QUALIFICATIONS: · 8-10 years of crane service technician experience. · Must have strong verbal, written and interpersonal communication skills. · Demonstrate the ability to learn mechanical and industrial skills. · Candidate must be willing to travel and work in production environments, with some overnight travel is possible. · Ability to operate company phone and computer. · Ability to complete electronic forms in a timely manner. · Ability to work extended hours, and on holidays, as required. PHYSICAL REQUIREMENTS: Lift /Carry up to 40-50 pounds unassisted. Squat, twist, reach, climb, and bend frequently. Ability to push/pull material with equipment assistance. Possess hand/eye coordination and bilateral dexterity (gross and fine). Possess depth perception and peripheral vision. Ability to stand/walk 95% of the work day. Possess the ability to hear. WORKING CONDITIONS: Exposure to hot and cold conditions. Subject to working frequently at considerable heights. BENEFITS AVAILABLE: · Medical / Dental / Vision Insurance · 401k plan with match · Company-paid short term disability insurance · Long term disability insurance available · Company-paid basic life insurance · Employee assistance program · Additional life insurance available · 9 paid holidays · PTO Program · Tool purchase program · Weekly pay periods with direct deposit · Competitive pay Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled/Other Protected Category DeSHAZO's Mission: DeSHAZO is committed to elevating our clients' business needs through custom-built cranes and tailor-made automation systems. We enhance our products by providing expert inspections, repairs, modernizations or rebuilds. Requirements:

We provide: Year-round stable, steady work Regular work hours Flexible scheduling Gas card/Mileage reimbursement TruBlue t-shirts, polos, and other company gear for the team Strong office support TruBlue of Beverly is a Home Ally Service company dedicated to providing premium handyman services with bonded and insured technicians, giving our customers peace of mind. Our mission is to help people maintain the safety and value of their homes by offering handyman services, home assessments, and regular maintenance We are searching for a reliable lead home technician (handyman/handywoman) to provide general home services to our customers in our community AND lead a group of technicians who will report to you. If you have 10 or more years of paid experience in general carpentry and handyman work, we want to hear from you. We are looking for a seasoned Team Leader with the following experience: Bathroom upgrades / remodel Drywall repair / patching/ caulking Flooring repair and installation General carpentry General home repairs and handyman work Kitchen repair / remodel Minor plumbing and electrical Painting interior and exterior What we value: FAMILY - Why else are we in this business? It is our most important asset, and we strive to make everyone feel like they are part of our family! INTEGRITY - Treating people with respect and looking for the same in return, everyone has a voice! TRUST - Achieved through reliability and credibility, cannot just talk it, ya gotta walk it too! QUALITY - Taking pride in one's work and providing the best value and customer experience possible, they will not always remember the work that was done, but they will remember you! The appropriate candidate for the Lead Technician/Handyman position will be proficient in miscellaneous around-the-house type repairs like carpentry, basic plumbing, drywall, painting, and basic electrical. Candidates do not need to be licensed tradesmen, but those candidates are welcome to apply. Qualified candidates will need a driver's license, a reliable vehicle, and standard tools. Candidate must also be a legal citizen of the US, and speak fluent English We are actively interviewing for this position - if you have the skills we're looking for, apply today, and our hiring manager will follow up! All locations are independently owned and operated. Service offerings, certifications, and licenses vary by location. T.B. Franchising Systems, Inc. is not affiliated, connected or associated with TruPros International, Inc. or any of its services. All inquiries specific to employment at this location should be made directly to the franchise location, and not to TruBlue Home Service Ally Corporate office."

Benefits: Simple IRA (Matching) Company parties Competitive salary Dental insurance Health insurance Opportunity for advancement Paid time off Vision insurance About the Role: We are seeking a highly skilled and professional AV Service Technician Lead to join our team in a client-facing position specializing in high-end residential smart home systems. In this role, you will provide expert troubleshooting, service, and maintenance for complex home technology systems-including automation platforms, audio/video distribution, home theaters, lighting control, networks, and surveillance systems and more. This is an excellent opportunity for a technician who takes pride in craftsmanship, thrives in problem-solving environments, and enjoys working with cutting-edge technology in stunning residences. ⸻ Key Responsibilities: • Diagnose and resolve issues across integrated AV and control systems (Crestron, Savant, Elan, URC, Control4, Lutron, etc.) • Troubleshoot and service distributed audio/video, home theater systems, media rooms, lighting/shade control, and network infrastructure • Provide remote and onsite support for system performance, firmware updates, hardware failures, and user experience improvements • Serve as a technical point of escalation for complex or high-profile service calls • Identify and fix network-related performance issues, configuration problems, or equipment failures • Perform routine system maintenance, firmware updates, and system optimizations • Interface directly with homeowners, estate managers, and design/build professionals with professionalism and clarity • Document service calls, findings, and resolutions in a timely and organized manner • Recommend system upgrades or preventive measures when necessary • Ensure all work is performed cleanly, discreetly, and in line with the standards of luxury environments ⸻ Qualifications: • 5+ years of hands-on experience in AV/low voltage troubleshooting and service • In-depth knowledge of control systems (Crestron, Savant, Control4), lighting/ shading (Lutron), networking, and home theater technology • Strong communication skills and client-facing professionalism • Working knowledge of remote support tools and service platforms (OvrC, Domotz, etc.) • Familiarity with home theaters, matrix switches, DSPs, wired/wireless networking, and rack systems • Experience managing or leading small service teams is a plus • Comfortable working in high-end homes with a premium level of client interaction⸻ Preferred Certifications (a plus, not required): • Crestron, Savant, Control4, Elan, URC, RTi, QSC technician certifications • Lutron HomeWorks or Ketra, Vantage, RadioRa • CTS or CTS-I (AVIXA) • Network certifications (Cisco, Ubiquiti, CompTIA) ⸻ What We Offer: • Work with cutting-edge technologies in the most exclusive homes • Competitive salary and benefits package • Opportunities for advancement in a growing, respected company • Supportive leadership and collaborative team environment • High-end tools, vehicles, and ongoing training Smart Home Integration offers a tremendous growth opportunity for a variety of skill sets including sales, technician, project management, operations and more. According to CEDIA, the global trade association for the home technology industry, the most recent 2021 Integrated Home Market Analysis reports the estimated value of the integrated home market at $20.1B. Categories experiencing the most growth include lighting, motorized shades, lighting control, and networking. Smart Home Integrators offer careers in sales, operations, marketing, project management, finance, merchandising, purchasing, technical trades, and customer service. If you're seeking to make an impact from the start of your career, spark impressive change, learn new or innovative skills, and most importantly, gain success in a field that rewards ambitious hard workers, a Smart Home Integration opportunity is for you! Benefits of working in Smart Home Integration Opportunity for Growth If you want a responsible and engaging position in a fun environment, why not choose the Smart Home Integration sector. With the proper training and career road map, you can write your own ticket! Gain In-Demand Skills As consumers focus on improving and connecting their lives at home, growth in the smart home sector is booming.

Technology Services Lead Deerfield, IL - Full Time Are you looking to have a meaningful impact on the world through cutting-edge cleantech on a global scale? Are you a hard worker who is looking to make history and change an industry? LanzaJet, Inc. is a global company and world leader in clean energy technology committed to decarbonizing the transportation sector. Our goal is to produce over 1 billion gallons of sustainable aviation fuel (SAF) and sustainable diesel fuel through our patented technology and process by 2030; and become premier operating and licensing company in the sustainable fuels market place. LanzaJet was founded in 2020 and is backed by investors Shell, British Airways, Suncor Energy, LanzaTech, and Mitsui. These investors, as well as supporters All Nippon Airways, Bill Gates's Breakthrough Energy Catalyst Foundation, and Microsoft's Innovation Fund, have set the stage for our accelerated growth. LanzaJet's proprietary sustainable alcohol-to-jet (ATJ) fuels technology has been in development for over 15 years, has been approved for and used in global commercial flights for airlines including Virgin Atlantic and ANA. We are currently building the world's first commercial-scale ethanol to jet fuel refinery in Georgia, USA - set to begin production at the end of 2023. Additional commercial-scale low-carbon refineries are also being developed across the world in places like Japan, Australia, India, and Europe. Aviation connects the world. And we're working to ensure that the connection is sustainable. At LanzaJet, we are a group of innovative and determined people committed to building a more sustainable future, today. Because we believe that Someday is Now. We're growing fast. Join us! Job Description The primary responsibility of the Technology Services (TS) Lead is to develop full range of service capabilities within LanzaJet for the technology transfer and the commercialization of LanzaJet's ethanol to SAF technology. The TS Lead will coordinate with the Operations and the Engineering Teams and build the infrastructure to support LanzaJet owned and licensed commercial plants. The support to the LanzaJet commercial plants will include services provided during the design phase, construction phase, start-up and stabilization phase, and turn-around phase activities. The TS Lead will be also conducting the training of the LanzaJet global customers. Responsibilities: Lead activities for the support of LanzaJet ATJ commercial plants, Ensure safe and functional design of the plant by participating in the P&ID, safety (HAZOP, PHA, etc.), and 3-D model reviews, Improve the technology by capturing and incorporating lessons learned from the operating plants in the new unit designs, Be the primary interface with the customer and the customer's EPC to answer any technical questions related to the construction of the unit, Coordinate the inspection and check-out of the unit, prepare check lists, and advise on the changes/modifications to the design, Prepare customer training modules, Conductoom and field training of the customers, Support various activities in the support of and start-up of the unit, Coordinate process guarantee test run and get unit acceptance, Monitor the unit performance by collecting and analyzing the unit performance data, Develop remote monitoring capability, Calculate and report the key performance indicators, Estimate the remaining catalyst cycle life, Provide guidance with any change in the overall plant objective, Review any feed changes and provide guidelines for operation changes, Troubleshoot plant operations, as needed. Provide guidance for the reactor unloading and the safe shutdown of the plant, Analyze complete catalyst cycle and conduct end of the cycle review, Collect representative samples of the catalysts for post-mortem analysis, and Support turn-around activities, as requested. Required Qualifications: A minimum of a bachelor's degree in chemistry, engineering, or science-related field is required. 10+ years of relevant experience in technology services in the refining, petrochemical, or chemical industry. Experience in working directly with customers. Preferred Qualifications: Previous leadership experience (>5 years) Experience in the start-up and operation of new technology Your skills, knowledge, and abilities include: Being proficient in Microsoft applications, such as Word, PowerPoint, and Excel Demonstrating competencies in the areas of leadership, initiative, teamwork, and interpersonal effectiveness Ensuring a safe work environment by working safely and, complying with environmental, health and safety standards Strong work ethic and being able to remain productive in an empowered team environment.