Service technician jobs in Grapevine, TX - 4,393 jobs

The Heavy Equipment Lube Tech is responsible for fueling, greasing, and performing routine service checks on heavy construction equipment to ensure safe and efficient operation. This role supports mechanics and operators by maintaining proper fluid levels, performing preventative maintenance tasks, and identifying potential issues before they become major repairs. Key Responsibilities Fuel, grease, and service heavy equipment daily in compliance with company standards. Inspect and maintain fluid levels (engine oil, coolant, hydraulic oil, transmission fluid, etc.). Perform routine inspections to identify leaks, loose parts, and visible wear. Operate lube/fuel truck safely and efficiently to service equipment across job sites. Track and log service records for all equipment maintained. Report any mechanical or safety issues to mechanics and supervisors immediately. Assist mechanics with minor repairs and preventive maintenance as needed. Ensure compliance with all safety, environmental, and company regulations. Keep equipment and fueling areas clean and organized. Preventive Maintenance Perform scheduled preventive maintenance services including oil changes, filter replacements, and lubrication of moving parts. Inspect belts, hoses, batteries, and hydraulic systems for signs of wear. Maintain preventive maintenance logs and report all findings to the equipment manager. Coordinate with mechanics to schedule equipment downtime for preventive maintenance. Ensure preventive maintenance is completed on time with minimal equipment downtime. Qualifications Minimum 3 years' experience in heavy equipment fueling, oiling, or related field. Valid CDL with hazmat/tanker endorsement preferred. Knowledge of heavy equipment lubrication requirements and service practices. Ability to operate service trucks and fueling equipment safely. Strong attention to detail and ability to work independently. Physical ability to climb, lift, and work outdoors in all conditions.

The Cooling Field Service Engineer is responsible for commissioning, maintenance, troubleshooting, and repairing cooling systems in the data center. The role involves traveling to client sites, ensuring equipment operates efficiently, and delivering high-quality service to maximize customer satisfaction. Key Responsibilities Commission, inspect, and service cooling systems and related equipment. Perform routine preventive maintenance, testing, and calibration of cooling systems. Diagnose mechanical, electrical, and control issues; carry out necessary repairs and adjustments. Respond to customer service calls, provide on-site technical solutions, and ensure timely resolution of issues. Provide technical training and support to clients on system operation and best practices. Maintain accurate service records, documentation, and reports. Collaborate with engineering and product teams to provide feedback for product improvements. Ensure compliance with safety regulations, environmental standards, and company policies. Manage spare parts, tools, and equipment efficiently. Support continuous improvement initiatives and uphold high service quality standards. Qualifications & Skills Bachelor's degree or diploma in Mechanical Engineering, Electrical Engineering, Refrigeration, HVAC Technology, or related field. Proven experience in servicing HVAC/refrigeration/cooling systems. Strong knowledge of thermodynamics, fluid mechanics, and control systems. Ability to read and interpret technical drawings, wiring diagrams, and service manuals. Proficient in troubleshooting and repairing mechanical and electrical components. Good communication and customer service skills. Willingness to travel frequently and work independently. Certification in HVAC/R or relevant trade license (preferred). Familiarity with industry standards (ASHRAE, EPA, F-Gas, etc.) is a plus. Working Conditions Frequent travel to customer sites (regional/national). On-call availability for emergency support. Exposure to mechanical, electrical, and environmental hazards (with required PPE provided). Degree/diploma in Mechanical Engineering, Electrical Engineering, HVAC Technology, or related field. Hands-on experience in servicing cooling products (HVAC, refrigeration, chillers, cooling towers, or similar equipment). Strong knowledge of thermodynamics, refrigeration cycles, and control systems. Ability to read and interpret mechanical/electrical drawings and technical manuals. Excellent troubleshooting and problem-solving skills. Strong communication and customer service orientation. Willingness to travel frequently and work independently. HVAC/R certification, EPA/F-Gas license, or equivalent (preferred).

We are seeking hardworking and professional technical personnel to join our Operations Division in Melrose Park, IL! The Field service Technician (After Sales) in Dallas is key to the technical support of our automated storage systems equipment at our customers' sites in the USA and Canada. Technicians are responsible for performing accurate and timely electromechanical support, training, upgrades, and repair of equipment. Responsibilities: Provide advanced electromechanical support in the after-sales phase for all automated warehouse installation projects throughout the U.S. and Canada. Analyze and diagnose faults (controls software, electrical, mechanical, etc.). Make necessary modifications to PLC's and electronic equipment. Test and adjust the mechanical and electrical components as necessary. Communicate requests to Sales for spare parts orders. Create quality and status reports regarding service calls. Communicate any issues that arise on site to the After Sales Manager. Train customers on technical system routine maintenance operations. Provide on-demand corrective maintenance services to customers as needed. Minimum Requirements: 3 years of automation after-sales electromechanical service or industrial maintenance experience. Ability to travel (USA and Canada), 90% of the time. Ability to read and interpret electrical schematics and mechanical drawings. Knowledge related to automation controls. Experience with PLC programming (Siemens and Allen Bradley). Basic knowledge in troubleshooting frequency inverters (SEW, Lenze, KEB). Basic knowledge in diagnosing and troubleshooting industrial communication network connections (Profibus, Profinet, etc.). Excellent communication and customer service skills and presence. Ability and willingness to work variable hours including weekend, night, and/or holiday work. Ability and willingness to lift, lower and carry objects up to 50 lbs., work from heights, climb ladders, and work in confined spaces. Must have a valid driver's license and good driving record. Spanish language fluency is a plus. Candidates must live in or being willing to move to Dallas. We offer: Competitive compensation. The ability to become a part of an industry-leading dynamic team with a high focus on delivering results and continuous improvement. 401(k) plan through Fidelity, with a generous company match; 100% vested immediately upon contributing and no waiting period to start participating. Paid Holidays and Paid Time Off with the option to cash out unused PTO every year. Possibility for telework days, depending on position, with flexible make-up time for exempt employees. Blue Cross Blue Shield medical insurance plans, along with dental and vision benefits. Opportunities for career development and advancement; enhance your technical, specialized knowledge and gain new skills through promotions from within.

Job Title: Maintenance Technician Duration: 12 Months Contract (Potential temp to perm) Payrate: $30/hr. Shift: 1st shift (Mon-Fri, 6am-2:30pm) Job Details: Level III: 5-7 years. Maintain, repair and service facility systems. Performs skilled maintenance and repair services of facility systems such as mechanical, electrical, and building systems. Interpret blueprints and schematics. Implement methods, practices, and techniques of maintaining building and facilities to identify and address recurring problems with machinery, equipment, or parts. Conduct periodic inspections to evaluate requests for repair. Typically requires a high school education or equivalent and required years of experience. Frequently reports to a Repair & Maintenance Supervisor.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. · Independently performs maintenance as per industry standards. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Drives and participates in CI activities - processes, results and cost savings. · Updates records and reviews CMMS history. · Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. · Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development. · Completes on-the-job and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program. · Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate · May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. (****************************************************************************************************** ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here. (******************************************************************************************************

Adecco is currently hiring a Maintenance Technician to support a portfolio of industrial properties across the Dallas/Fort Worth market. This role is responsible for building maintenance, repairs, and preventative maintenance in a fast-paced environment. Experience across multiple trades is required, along with a strong work ethic and a positive attitude. This is a full-time, hourly position reporting directly to a Regional Facilities Account Manager. A company van, basic tools, and uniform are provided. **Key Responsibilities** + Perform general handyman and maintenance work across facilities + Complete repairs and preventative maintenance in areas including carpentry, electrical, painting, plumbing, HVAC, ventilation, and roofing + Inspect buildings, sites, and equipment to identify repair or maintenance needs + Utilize a computerized maintenance management system (CMMS) to track work orders, preventative maintenance, and facility assets + Respond to emergency maintenance requests and troubleshoot issues to determine root cause and solution + Accurately document all work using a computer-based ticketing system **Required Skills** + Working knowledge of carpentry, electrical, plumbing, drywall, appliances, and grounds maintenance + Strong written and verbal communication skills + Proven ability to diagnose and repair maintenance issues + Ability to complete tasks efficiently and within expected timelines + Professional demeanor when interacting with clients, vendors, and team members **Required Experience & Certifications** + 3+ years of experience in building maintenance and/or facilities management + Experience coordinating with outside vendors and contractors (preferred) + Commercial electrical experience a plus, but not required + High school diploma or equivalent (Trade school preferred) + Valid driver's license (subject to company driver requirements) + Ability to pass a background check + EPA Certification required + OSHA 10 or OSHA 30 certification required **Physical Demands & Working Conditions** + Ability to lift and carry up to 50 pounds + Ability to climb ladders and work at heights + Work performed across multiple industrial facilities **Pay Details:** $22.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ********************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: + The California Fair Chance Act + Los Angeles City Fair Chance Ordinance + Los Angeles County Fair Chance Ordinance for Employers + San Francisco Fair Chance Ordinance **Massachusetts Candidates Only:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Shift: Days: 6am- 6pm (2-2-3 schedule with rotating days & weekends) Manufacturing Machinery Experience. Must be able to comply with food and beverage GMP standards Troubleshooting and repairing pneumatics Troubleshooting and repairing hydraulics Are you looking to make a career change to a rapidly growing, stable, innovating company? This exciting opportunity as a Maintenance Technician offers a competitive salary plus an excellent benefits package including medical insurance, dental insurance, vision insurance, paid PTO etc. Does this position match your future career goals? Then this Maintenance Technician opportunity could be the right fit for you. Great Pay Excellent Benefits Immediate Hire We are looking for a thorough Maintenance Technician to undertake the responsibility to preserve the good condition and functionality of premises. Responsibilities: Perform preventative maintenance on machinery. Experience in PLC and test equipment repair procedures. hydraulic, pneumatics and electrical work. Set up on production equipment. Qualifications: Proven experience as maintenance technician. Basic understanding of electrical, hydraulic and other systems. Knowledge of general maintenance processes and methods. Must be able to comply with food and beverage GMP standards. Troubleshooting and repairing pneumatics. Troubleshooting and repairing hydraulics. Provides emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service. Reading and interpreting information and specifications from blueprints, manuals, and schematic drawings in order to repair equipment, machinery, physical structures and systems. AC/DC Motors and Control Systems, Basic Schematic Reading, Basic PLC Knowledge and Electrical Troubleshooting. Prepares and sets up machinery for scheduled production runs. Reads and interprets equipment manuals and work orders to perform required maintenance and service. Jasleen Kaur ********************************* Ajulia Executive Search is a search firm specializing in Manufacturing, Finance, IT, Legal and Pharmaceutical positions. This is a confidential search for one of our preferred clients. It is a direct hire position that includes competitive compensation and full comprehensive benefit package. #ZR

This is a full-time, on-site role for a Maintenance Technician based in Grand Prairie, TX. The Maintenance Technician Assistant will perform daily maintenance and repair of equipment, troubleshooting issues to ensure minimal downtime. Responsibilities also include conducting preventive maintenance tasks, performing industrial maintenance, and ensuring equipment is functioning optimally to support production goals. The role may also require collaboration with team members and adherence to safety and quality standards.

LHH is working with a metals manufacturer in Arlington, TX that is seeking a Maintenance Technician. Maintenance Technician Employment Type: Full-time | Onsite | Day shift Compensation & Benefits: Competitive pay based on experience $1,500 sign-on retention bonus 401(k) with 5% company match 15 days PTO plus paid holidays Comprehensive health coverage (Medical, Dental, Vision) Company contributions to HRA or HSA accounts based on your plan choice Shift differential for off-shifts Schedule & Work Environment: Shift: Monday-Friday, 7:00 AM - 3:30 PM (40 hours/week) Minimal overtime required Pre-employment drug test and physical required Safety-sensitive role in an industrial environment Duties: Perform preventive maintenance and troubleshooting on furnaces, boilers, chillers, pneumatic systems, and hydraulic equipment Inspect and maintain fluid levels, water flows, quench oils, filters, and washer soap per specifications Diagnose mechanical issues and execute corrective actions to restore equipment to optimal performance Document all maintenance activities, repairs, and modifications accurately Maintain a clean, organized work area and manage tools, manuals, and parts inventory Operate company vehicles safely for material pickups as needed Report repair needs promptly and recommend improvements for efficiency and safety Requirements: Proven experience working on industrial furnaces, boilers, chillers, pneumatics, and hydraulics Strong mechanical troubleshooting skills and familiarity with MS Office/database tools Ability to read and interpret technical manuals and blueprints Effective communication, organizational skills, and attention to detail Must meet ITAR requirements (U.S. Citizen or U.S. Permanent Resident)

Amerit Fleet Solutions, one of the leading fleet maintenance companies in the US, is looking to hire a skilled Trailer Technician/Mechanic in DFW Airport, Texas! The Trailer Technician/Mechanic will be responsible for the repair and maintenance of Class 7 - 8 trailers and will operate vehicles and test all working parts in various functions to ensure proper operation. Compensation: $27-$32 Hourly Pay, DOE - Paid weekly, every Friday! Shift: Sunday - Thursday, 1:00pm - 9:30pm The benefits of belonging - what's in it for you? Competitive hourly pay - paid weekly, every Friday Full benefits within 30 days Medical, dental, vision, prescription drug coverage, life insurance, disability insurance 401(k) match Paid vacation, holidays, and sick time Commitment to your safety through boot and prescription safety glasses reimbursement Career and learning development with an extensive training program through our Amerit University Employee referral program, up to $500 bonus ASE certification program with fee reimbursement and bonus Employee recognition platform that includes opportunities to redeem points for merchandise Employee Assistance Program (EAP) 24/7 nurse triage line Employee discounts on cell phone service and entertainment tickets Employee resource groups (ERGs) that foster inclusion Wellness and fitness programs through our providers What the Trailer Technician/Mechanic role looks like: Prepare vehicle records and report both manually and on a computer Perform safety inspections of equipment and prepare safety documentation required Inspect and perform work on the under parts of vehicles Access any area of the equipment or vehicle to perform necessary maintenance Move parts to and from the job site and remove or install these parts on vehicle Comply with all applicable laws/regulations, as well as company policies/procedures Perform other duties as required What our ideal candidate looks like: Must have at least 2 years' experience performing vehicle and trailer maintenance. Must be able to operate a manual transmission vehicle to determine if operating properly Must be able to enter and exit the driver's compartment of the truck and/or behind cab using normally available footholds and handholds Must provide own hand tools Perform DOT inspections Basic computer skills Basic written and verbal communication skills (documentation, communication with peers, supervisors, etc.) Working Conditions: Exposure to heavy traffic areas while performing the duties of the job. Exposure to considerable amounts of dust, diesel fumes and noise. Exposure to chemicals, oils, greases or other irritants Access any area of the equipment or vehicle to perform necessary maintenance Ability to move and position heavy objects Ability to bend, stoop, crouch, kneel and crawl to repair vehicles Ability to work outside in various weather conditions. Are you ready to advance your career as a Trailer Technician with Amerit Fleet Solutions? Apply Today! ******************************************************* #Mechanic #Hiring #TrailerMechanic #NowHiring #TrailerTechnicianCareer #MechanicJobs #TrailerTechnician INDCD

This role is primarily responsible for performing HMC Change Over level maintenance for production/operations. Perform regular operations preventive maintenance and replace parts that need to be replaced during the changeover process. Contributes to ensuring safe working practices are followed and contributes ideas to simplify and standardize the workplace. Support to troubleshoot malfunction of the HCM equipment to operators as needed. ESSENTIAL DUTIES AND RESPONSIBILITIES: Core duties and responsibilities include the following and other duties may be assigned ty the director of production and cooperation with the gels filling production supervisor. Responsible for HMC setup between the time frame established to ensure the equipment is properly set up for the production schedule. Train HMC machine operators on how to be troubleshooting the line when malfunctions occur. Troubleshoots, maintains, supports and assists with repairs to HMC production equipment. Assist with all process improvements projects and production/quality standards, Company KPIs (Key Performance Indicators) to include, but are not limited to safety, quality, cost and housekeeping. Performs preventive maintenance on all minor and major pieces of equipment related to HMC production equipment. Complies with all equipment, safety and OSHA rules and regulations. Maintain inventory of spare parts and consumable parts for equipment. Monitor facilities and manufacturing operating equipment on a daily basis, notify maintenance leadership and direct supervisor the level of spare parts, equipment problems and inefficiencies and recommend possible solutions. Identify existing and potential operational problems and efficiencies. Maintain and organize the documents and procedures related to calibration, preventative maintenance and usage of logbook. Performs related duties as assigned. Follow the Company documents (BOM) when the setup is performed and during the shift, best GMP practices and safety regulations. Perform quality checks to ensure HMC product meet company and customer quality standards e.g. (weights, Seals, code, etc.) Always maintain a safe and clean production area. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Must have technical knowledge and mechanical aptitude to perform complex start up, debugging and repairs of packaging machinery. Ability to read and understand technical instructions and reference materials in order to interpret and apply Standard Operating Procedures and Work Instructions; perform practical application of mathematical calculations to solve specific mechanical problems and use many types of equipment. Must communicate effectively in order to interface with multiple internal customers and equipment vendors, contractors and others to meet project requirements. Reading, writing and speaking English clearly and concisely. Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed. EDUCATION AND/OR EXPERIENCE: 2-3 years as a maintenance mechanic in a manufacturing environment or 2-5 Machine operator in a manufacturing environment. Experience working in a pharmaceutical manufacturing environment preferred. Digital Logic Systems Reading Schematics and Symbols COMPETENCIES: To perform the job successfully, an individual should demonstrate the following competencies: Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops solutions. Quantity - Meets productivity standards; works in timely manner; Strives to increase productivity. Safety and Security - Observes safety and security procedures. Adaptability - Adapts to changes in the work environment; Changes approach or method to best fit the situation. PHYSICAL DEMANDS & WORK ENVIRONMENT: The physical and environmental demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit. The employee must regularly lift and /or move anywhere from 10 - 50 pounds; and occasionally more than 100 pounds with assistance. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Ready to take your EEG skills on the road? Join SynapseTBI, a fast-growing neurodiagnostics team, and bring life-changing testing to patients across the country. We're looking for a motivated Ambulatory EEG Technologist who loves patient care, enjoys flexibility, and is excited about a career that blends healthcare with travel. Company Description SynapseTBI offers a comprehensive protocol of objective diagnostic testing for the diagnosis of Traumatic Brain Injuries (TBI), Mild Traumatic Brain Injuries (mTBI), and Post Concussion Syndrome. Recommended and validated by the American College of Occupational and Environmental Medicine (ACOEM) for "Post TBI Patients who either have symptoms of cognitive deficits and/or have sustained a TBI sufficient to cause same", our services also include neurologist consultations, recommended treatment plans, psych evaluations, in-home TBI treatment programs including Neurofeedback, and life care plans. Role Description This is a travel role for an ERP/EEG Technician, primarily covering the Midwest Regions, preferably based in the Dallas area. The EEG Technician will be responsible for performing Neurodiagnostic Testing, assisting with epilepsy and neurophysiology studies, ensuring patient care, and working closely with medical professionals to conduct diagnostic tests, assessments and treatments. What You'll Do: ✨ Travel to patient homes, clinics, and partner sites to set up and remove ambulatory EEG studies and/or run ERP testing along with other TBI diagnostic studies ✨ Apply electrodes and ensure clean, accurate data collection ✨ Teach patients and families how the test works and answer their questions with confidence ✨ Keep equipment in top shape and maintain detailed study records ✨ Represent our company with professionalism, compassion, and a patient-first mindset What We're Looking For: ✔️ EEG experience preferred, but not required (we will teach the testing for the right candidate) ✔️ Someone that works well on their own and doesn't require a micro-manager ✔️ Credentialed techs (R. EEG T.) a plus - but not required ✔️ Someone flexible, detail-oriented, and ready to travel ✔️ Strong communication skills and a passion for helping patients ✔️ A valid driver's license and reliable transportation required Why You'll Love It Here: 🌎 Travel nationwide with all lodging and travel expenses covered 💰 Competitive salary + a comprehensive bonus plan 🩺 Full benefits (health, dental, vision, PTO) 📈 Ongoing training and career growth opportunities 💡 Work with a supportive team that values your expertise If you're looking for a career that takes you beyond the walls of a hospital and gives you the chance to explore new places while making a difference in patients' lives-this is it.

Hi, I hope you are doing good. I have a job opportunity related to your profile with one of our client, please find below Job Description for your review. If you are interested and available for the following position then please send your updated resume in word format along with your contact details to discuss further. Role: Technology Lead -Java, JEE, Microservices, Spring boot, Spring MVC Duration: Full Time Location: Plano, TX Qualifications Basic •Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. • At least 4 years of experience with Information Technology. Preferred Must Have Technical Skills • At least 2 years of experience in Microservices development using Java, JEE, Spring, Spring MVC, Spring Boot, MAVEN. Primary Skills: Java, JEE, Microservices, Spring boot, Spring MVC Secondary Skills: Spring Cloud, Spring integration • Understanding of key components of a micro services architecture including containers, load balancing, distributed cache. • At least 2 years of experience in translating functional/non-functional requirements to system requirements. • Knowledge in Docker framework and deployments, container management • Experience on Java, Integration, Restful services, concepts of SOA and API are plus. • At least 3 years of experience in software development life cycle. • At least 3 years of experience in Project life cycle activities on development and maintenance projects. • At least 3 years of experience in Design, leading teams, review code. • Ability to work in team in diverse/ multiple stakeholder environment • • Analytical skills • Experience and desire to work in a Global delivery environment • Knowledge of continuous integration using Bamboo • Experience working in a scrum team and in onsite/offshore model is a plus Qualifications •Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Hiring an experienced Bike Technician. A passion for cycling, knowledge of bicycle mechanics and bicycle parts, and a proactive and problem solving attitude are qualities at the top of our list! In this job you will Assemble and prepare bikes for sale. Perform a variety of service functions on new and used bikes. Provide one of a kind customer service through direct and detailed interaction with customers. You are Dependable People-oriented Adaptable Detail-oriented Proactive Positive Problem solver Repair experience preferred. Riders and enthusiasts preferred. Open to all ages and levels of experience. Duties Duties include but are not limited to: Apply shop standards in the assembly and repair of bikes and skis across the full product line. Evaluate the mechanical condition of the product and estimate the cost of repairs. Provide an educated assessment for a bicycle repair for the customer that includes an estimated completion date. Meet or exceed shop production standards. Complete paperwork accurately and fully (record parts used work performed detail of torque tolerance and standard procedures; complete pricing of job ticket) and process to next status or location. Record and report any deficiencies not addressed by the repair work being done to the customer and or the appropriate leader. Assist customer in the sale or repair process by sharing product and technical knowledge as appropriate. Operate cash register as necessary. Report or record replacement parts inventory and supply shortages to the General Manager. Maintain shop cleanliness including bench and common workspace.Install and adjust speed and gear mechanisms. Assemble new bicycles. Install, repair, and replace equipment or accessories, such as handlebars, stands, lights, and seats. Align wheels. Disassemble axles to repair, adjust, and replace defective parts, using hand tools. Shape replacement parts, using bench grinders. Repair holes in tire tubes, using scrapers and patches. Weld broken or cracked frames together, using oxyacetylene torches and welding rods. Paint bicycle frames, using spray guns or brushes. Install and adjust brakes and brake pads. Help customers select bicycles that fit their body sizes and intended bicycle uses. Sell bicycles and accessories. Install new tires and tubes. Clean and lubricate bicycle parts. Order bicycle parts. Build wheels by cutting and threading new spokes. Install vehicle parts or accessories. Adjust vehicle components according to specifications. Explain technical product or service information to customers. Sell products or services. Install vehicle parts or accessories. Perform basic equipment maintenance. Order materials, supplies, or equipment. Assemble mechanical components or machine parts. Install vehicle parts or accessories. Adjust vehicle components according to specifications. Assemble mechanical components or machine parts. Install vehicle parts or accessories. Align equipment or machinery. Disassemble equipment for maintenance or repair. Grind parts to required dimensions. Repair tires. Operate welding equipment. Paint surfaces or equipment. Other duties as needed/ assigned. Requirements Requirements include but are not limited to: Minimum 2 years experience preferred working as a technician/ mechanic in a bike shop. Previous bike assembly experience or equivalent preferred Interest in working in a team environment committed to providing excellent sales and service experience while increasing sales through service Strong attention to detail Ability to maintain open and positive relations with employees and customers Interest in developing own skills and knowledge Availability to work a flexible schedule based on business needs, including evenings and weekends Ability to periodically lift 40 pounds Nice To Haves Preferred candidates will have knowledge and experience in any or all of the following systems and tools: Adjustable hand wrenches Bench mount stands Wall mount stands Bike cable cutters Box end spanners Cable cutters Cable stretchers Cassette lock ring tools Chain checkers Chain cleaner brushes Chainring nut wrenches Compact scissors Component cleaning brushes Cone wrench sets Crank bolt wrenches Crank pullers Crown race setters Derailleur hanger alignment gauges Desktop computers Floor pumps Folding hex wrench sets Frame taps Handlebar holders Hex tools Inventory management software LightSpeed Cloud Linkage clamps Minipumps Multipurpose hammers Needle nose pliers Offset brake wrenches Open end wrench sets P-handled hex wrenches Pedal Powered Software Bicycle Repair Man Pedal wrenches Personal computers Phillips head screwdrivers Point of sale terminals Portable repair stands Precision spoke wrenches Repair Traq RepairTRAX Screw type chain tools Shop repair stands Side cutter pliers Spoke gauges Sprocket removers Straight blade screwdrivers Threadless nut setters Three-way hex wrenches Tire levers Wall mount stands Web browser software Wheel truing stands Benefits A competitive benefits package including store discount and flexible scheduling is available to all associates.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. · Independently performs maintenance as per industry standards. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Drives and participates in CI activities - processes, results and cost savings. · Updates records and reviews CMMS history. · Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. · Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development. · Completes on-the-job and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program. · Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate · May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Adecco is hiring for a client in Lewisville, TX We are seeking a Maintenance Tech in Lewisville! **Maintenance Technician** We are looking for a maintenance technician to be part of the team for the overall upkeep and maintenance of our food manufacturing plant. We are a contract food manufacturer of salsas, sauces, marinades, drink mixes and refrigerated dips. The company is privately owned and operates a 30,000 square foot plant and warehouse in the Dallas area. The company is privately owned. We are audited by the FDA and the Texas Department of Health and must meet their requirements. **Responsibilities include:** + Ability to troubleshoot, fix and maintain equipment such as fillers, cappers, sealers, case packers and other equipment typically found in a food manufacturing environment + Limit equipment down time through preventative maintenance and be proactive in problem solving **Requirements** Strong background in electrical and mechanical systems Ability to work long hours and weekends on occasion Ability to pass a drug test Ability to work as part of an overall maintenance team Hands on approach and willingness to be proactive and involved Cooperative attitude and willingness to work in a team environment Food manufacturing experience is a plus Refrigeration systems experience is a plus Experience with Allen Bradley systems is a plus Basic knowledge of mechanical and electrical maintenance repair and multi craft repairs. Pneumatic systems Centrifugal and positive displacement pumps Deep understanding of high voltage wiring / 480v 3 phase. Basic understanding of VFDs , AC/DC electrical systems Tig and stick welding - Fabrication Able to supply own tools Use electrical testing equipment volt-ohm meter ,amp meter **Pay Details:** $20.00 to $25.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ********************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: + The California Fair Chance Act + Los Angeles City Fair Chance Ordinance + Los Angeles County Fair Chance Ordinance for Employers + San Francisco Fair Chance Ordinance **Massachusetts Candidates Only:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Amerit Fleet Solutions, one of the leading fleet maintenance companies in the US, is looking to hire a skilled Trailer Mechanic/Technician! The Trailer Technician/Mechanic will be responsible for the repair and maintenance of Class 7 - 8 trailers and will operate vehicles and test all working parts in various functions to ensure proper operation. Compensation: Competitive Hourly Pay - Paid weekly, every Friday! $25-$28/hr * + SRT Bonus Opportunity; up to $15,000 annually; paid monthly and based on performance. Shift: Tuesday - Saturday 1pm - 9:30pm The benefits of belonging - what's in it for you? Competitive hourly pay - paid weekly, every Friday Full benefits within 30 days Medical, dental, vision, prescription drug coverage, life insurance, and disability insurance 401(k) match program Paid vacation, holidays, and sick time Commitment to your safety through boot and prescription safety glasses reimbursement Career and learning development with an extensive training program through our Amerit University Employee referral program, up to $1,000 bonus ASE certification program with fee reimbursement and bonus Employee recognition platform that includes opportunities to redeem points for merchandise Employee Assistance Program (EAP) 24/7 nurse triage line Employee discounts on cell phone service and entertainment tickets Employee resource groups (ERGs) that foster inclusion Wellness and fitness programs through our providers What the Trailer Mechanic/Technician role looks like: Prepare vehicle records and report both manually and on a computer Perform safety inspections of equipment and prepare safety documentation required Inspect and perform work on the under parts of vehicles Access any area of the equipment or vehicle to perform necessary maintenance Move parts to and from the job site and remove or install these parts on vehicle Comply with all applicable laws/regulations, as well as company policies/procedures Perform other duties as required What our ideal candidate looks like: Must have at least 2 years' experience performing vehicle and trailer maintenance. Must be able to operate a manual transmission vehicle to determine if operating properly Must be able to enter and exit the driver's compartment of the truck and/or behind cab using normally available footholds and handholds Must provide own hand tools Perform DOT inspections Basic computer skills Basic written and verbal communication skills (documentation, communication with peers, supervisors, etc.) Are you ready to advance your career as a Trailer Mechanic / Technician with Amerit Fleet Solutions? Apply Today! INDKC

Hi, I hope you are doing good. I have a job opportunity related to your profile with one of our client, please find below Job Description for your review. If you are interested and available for the following position then please send your updated resume in word format along with your contact details to discuss further. Role: Technology Lead - .Net/ C# / WCF/ Web Services Duration:Full TIme Location: Plano TX Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. • At least 4 years of experience with Information Technology. Preferred • At least 7 years of C# .Net, ADO.Net, .Net framework, Webservice development and Integration, Web APIs, Service Oriented Arch., Multithreading, WCF and WebAPIs • At least 5 years' of experience in Relational database/SQL. • At least 5 years of experience in software development life cycle. • At least 5 years of experience in Project life cycle activities on development and maintenance projects. • At least 5 years of experience in Design and architecture review. • Analytical and Problem solving skills • Experience with following, auditing and bringing improvements in SDLC processes, Agile, TDD • At least 6 years of experience in working on middleware development in .Net. Building components, libraries, Services using C#.Net, Entity Framework, LINQ, WCF/WebServices/WebAPI in an SOA world. • Strong understanding of processes and threads with at least 4 years of experience in creating Multithreaded, multi-node, high performing applications. • Ability to effectively improve the performance of the components/applications/services. • Well versed with various design patterns. • At least 3 years of experience in Agile, Scrum or Kanban Methodologies • At least 3 years of experience in tools such as Jira, Jenkins and Continuous Integration and Continuous Delivery • Ability to work in team in a diverse/ multiple stakeholder environment • Experience in Trading, Financial Services and Wealth Management is preferred. Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. Additional Information All your information will be kept confidential according to EEO guidelines.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. · Independently performs maintenance as per industry standards. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Drives and participates in CI activities - processes, results and cost savings. · Updates records and reviews CMMS history. · Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. · Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development. · Completes on-the-job and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program. · Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate · May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. (****************************************************************************************************** ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here. (******************************************************************************************************