Service technician jobs in Melbourne, FL

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Orlando, FL, branch ( This branch is due to move to a new location in Apopka in early 2026) . The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

Greensea IQ is a world leader in advanced robotic solutions for the ocean. We are a dual-use technology company that has pioneered the use of autonomous systems in critical defense applications and is now transitioning that mature technology to the commercial maritime markets. Greensea has a defense product portfolio focused in Mine Countermeasures, Explosive Ordnance Disposal, and Special Operations. Since 2017, we have pioneered the use of autonomous robots and artificial intelligence to create scale and safety in ocean warfare while protecting the warfighter. Greensea's emerging EverClean product transitions defense technology to the commercial sector to create high impact and achieve significant growth within a large market. EverClean uses autonomous underwater robots to keep the hulls of ships clean, allowing ships to perform optimally. This Robot-As-A-Service business provides significant fuel savings, carbon emissions reductions, and increased vessel performance through a simple subscription program. Job Description The Remote Systems Operator is a key member of the EverClean Field Service Team at Greensea IQ, responsible for operating, maintaining, and managing remote robotic hull cleaning systems across the global EverClean fleet. This role combines remote piloting and technical maintenance responsibilities, conducting precision cleaning and inspection missions from shore-based control centers while performing hands-on maintenance, calibration, and troubleshooting of robotic systems to ensure peak performance in the field. This position is well suited for candidates who are detail-oriented, disciplined, and comfortable working with both technology and mechanical systems in dynamic environments. Responsibilities Pilot remote-controlled robotic systems to complete underwater hull cleaning and inspection missions. Perform technical maintenance, inspection, and troubleshooting of robotic systems and associated support equipment. Conduct pre- and post-mission vehicle checks, including basic mechanical and electrical diagnostics. Follow established procedures and safety protocols to ensure consistent, high-quality operations. Maintain situational awareness of vehicle status, environmental conditions, and mission progress. Record mission data and maintenance actions accurately for reporting and analysis. Collaborate with field teams to ensure the delivery of safe, efficient, and reliable services. Support mission planning, monitoring, and post-mission reviews to enhance operational reliability and efficiency. All other responsibilities as reasonably assigned. Requirements Reliable communication skills, both verbal and written. Technically proficient: experienced with computers, software, and mechanical or electrical systems. Ability to diagnose and resolve basic technical issues in the field. Ability to work independently and maintain focus during extended operations. Willingness to travel up to 20% and work flexible hours. Background in field operations, logistics, inspection, or remote equipment operations is ideal. Hands-on experience with robotics, electro-mechanical systems, or related technical maintenance, preferred. Experience with drones, simulators, or other control-based systems is not required but a bonus. Technical curiosity and interest in robotics or marine operations. The ability to work weekends, and the occasional overnight or holiday. To apply, please send your resume, salary requirements, and cover letter to careers@greensea IQ.com as PDF documents. The candidate must be eligible to work in the United States. Travel up to 20%. This position is based in Rockledge, FL and cannot be preformed remotely . Wage: $28-30/hr. Greensea IQ (************ IQ.com) is an equal opportunity employer. We offer a casual and fun work environment and provide our employees training and continuing education opportunities. Greensea IQ offers competitive salaries and a complete benefits package, including full health insurance, 401(k), and paid vacation, holiday, and sick leave.

Join Our Team as a Bakery Mechanic! Are you passionate about industrial systems and ready to ensure the smooth operation of a dynamic bakery in a fast-paced, fun, and energetic environment? Bakery Express Central Florida is looking for a motivated and enthusiastic Bakery Mechanic to join our team. If you thrive in a collaborative setting and have a knack for maintaining and repairing equipment, we want to hear from you! Welcome to Bakery Express Central Florida, where we've been spreading joy through baking since 1996! Located in the heart of Orlando, our wholesale bakery is a vibrant hub of teamwork, creativity, and flavor. We pride ourselves on working together as a team to produce a wide array of delicious baked goods, from classic croissants to decadent donuts. Our fun and energetic team is passionate about baking and dedicated to making every product with the highest quality. Position: Bakery Mechanic Location: Orlando Department: Maintenance Reports To: Maintenance Manager What You'll Do: Equipment Maintenance: Perform routine maintenance and repairs on bakery equipment to ensure optimal performance and minimize downtime. Troubleshooting: Diagnose mechanical, electrical, and systems issues and implement effective solutions promptly. Preventive Maintenance: Develop and follow a preventive maintenance schedule to extend the lifespan of equipment and prevent unexpected breakdowns. Safety First: Promote a safe work environment by following and enforcing safety procedures and addressing any hazards promptly. Continuous Improvement: Identify and implement improvement opportunities to enhance equipment efficiency and reliability. Documentation: Maintain accurate records of maintenance activities, repairs, and parts inventory. What We're Looking For: Experience: Proven experience in mechanical, electrical, or systems maintenance, preferably in a food production or manufacturing environment. Skills: Strong mechanical aptitude, excellent problem-solving skills, and the ability to work independently. Technical Skills: Knowledge of some or all of the following is a benefit, but not required: Programmable Logic Controllers (PLCs) HVAC/Refrigeration Welding Boilers Electrical skills Computer skills Mechanical and Electrical troubleshooting Physical Requirements: Ability to lift up to 50 lbs, and comfortable with walking, standing, stooping, bending, and reaching. Self-Starter: A proactive attitude and the drive to learn independently and take initiative. Why You'll Love Working With Us: Fun and Energetic Atmosphere: We believe in creating a work environment that is both productive and enjoyable. Great Benefits: 97% covered health insurance, including medical, dental, and vision. Competitive Pay: Starting at $30.00/hr depending on experience. 401(k) Match: We match up to 50% of the first 5% of your contribution, helping you save faster! Career Advancement: Opportunities for growth and development within the company. Ready to rise to the occasion? Apply today and become a part of our family at Bakery Express Central Florida! Send Applications to: Freda Banks Email Us: ******************************* Call Us: ************ ext. 12

6897 Bromley Drive, Melbourne, FL 32940 AUTOMOTIVE TECHNICIAN Enjoy Working in an A/C, Climate-Controlled Shop with Express Entry Doors & the Latest State-of-the-Art Equipment! Our Techs Stay Cool in the Florida Heat! Are you an experienced Service Technician with a passion for luxury vehicles? Jaguar Land Rover is looking for a skilled auto service professional to join our growing team! Many of our techs have been with us for years because we believe in taking care of our employees and giving them the tools and support that they need to succeed in their career. Come see how we treat our technicians! Why you should choose Jaguar Land Rover: Income: Top Compensation, Bonus Plans, Great Benefits Package Growth: Professional Factory Training, Process Training with a Work/Life Balance Respect: Acknowledgment, Communication & an Open-Door Policy Apply online today and grow with us! Click here to find out more about us! We offer: Top pay dependent on experience Performance Bonuses: Earn $60,000 - $150,000+ a year Flexible Schedules Medical, Dental, Vision, and Life Insurance Health Savings Account 401(k) Retirement Plan with Company Match Employee Assistance Program (EAP) Paid Vacation, Holidays & Sick Time High traffic, knowledgeable Service Advisors, and a fully stocked Parts Department means PLENTY of work available Long-term Job Security Air-conditioned Shop! New 55,000 square foot State-of-the-Art Facility Family-focused, Positive, and Professional Work Environment Clearly Defined Career Path for Advancement Your Responsibilities: Diagnose and perform vehicle repairs and maintenance Execute work according to manufacturer and dealership standards Communicate repair needs and timelines clearly Keep a clean, safe workspace and follow shop procedures Stay up to date through paid training and certification programs Other duties may be assigned according to skill level and certification What We're Looking For: 2+ years of experience as an Automotive Service Technician (preferred) Jaguar and/or Land Rover certification (preferred) Experience at a luxury dealership (preferred) B-level qualifications in diagnostics, electrical, and engine repair Strong mechanical and troubleshooting skills Proficiency with diagnostic equipment and basic computer skills Positive attitude and eagerness to learn Ability to work well in a team environment Valid driver's license and clean driving record High school diploma or equivalent We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

*For a quick application text APPLY1 to 82174* *About Dent Wizard* Dent Wizard is the nation's undisputed leader in automotive reconditioning services and vehicle protection products - and our success is the result of the great people who serve our customers. We're stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve. *Interior Repair Technician - No Experience Needed!* Location: Vero Beach, FL (local daily travel required) Training: Fully Paid (Includes Travel, Food, and Transportation) Are you detail-oriented and enjoy making things look brand new? Do you enjoy working with customers and being on the move? Join our growing team as an Interior Repair Technician and start a rewarding career-no experience required! What You'll Do: * Travel to customer locations (dealerships, auctions, and more) to perform mobile interior repairs * Repair rips, tears, burns, stains, and other cosmetic damage in vehicle interiors * Mix dyes and restore surfaces to like-new condition * Build strong customer relationships and promote our services What We're Looking For: * Strong customer service and communication skills * Detail-oriented with a passion for quality and precision * Comfortable working outdoors in various weather conditions * Manual dexterity for repetitive-motion tasks * Self-motivated with the ability to work independently * Physical ability to kneel, bend, squat, and lift up to 15 pounds * Vision abilities including close, distance, color vision, depth perception, and focus adjustment * Valid driver's license and a good driving record What We Offer: * *No experience necessary - *we provide comprehensive, paid training (includes travel and lodging) * *Unlimited, uncapped earning potential - the harder you work and the more you master your craft, the more you can make* * *Excellent benefits - *medical, dental, vision, 401(k), paid vacation, and more * *Awesome perks - *tools and supplies, company vehicle, gas card, mobile phone, and more * *Cross-training opportunities - *learn to become a Key or Wheel Tech and boost your income * *Independence - *manage your day without micromanagement * *Supportive team - *work with a fun, dynamic crew that's got your back * *Career growth - *advance to higher Tech levels or management roles Commission-based uncapped earning potential. First year earning potential: $50,000-$65,000 Long-term earning potential: $60,000-$110,000+ The compensation offered for this position will depend on qualifications, experience, and geographic location. The starting compensation is expected to be: $50,000-$110,000/year We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution). For more information on our benefit offerings, please visit our Dealer Tire Family of Companies [Benefits Highlights Booklet]( *EOE Statement: *Dent Wizard is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act*), or any other legally protected status, with respect to employment opportunities. *ADA Disclosure: Any candidate who feels that they may need an accommodation to complete this application, or any portions of same, based on the impact of a disability should contact Dent Wizard's Human Resources Department to discuss your specific needs. Please feel free to contact us at ...@dentwizard.com.

Permit Coordinator - St. Cloud, Florida A WORLD LEADER IN TESTING, INSPECTION & CERTIFICATION SERVICES Bureau Veritas offers dynamic, exciting employment opportunities with an attractive salary/benefit package and an opportunity to play a vital role with a global organization. If you would enjoy working in a dynamic environment and are looking for an opportunity to become part of a stellar team of professionals, we invite you to apply online today. Bureau Veritas is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, citizen status, sexual orientation, genetics, status as a protected veteran, or any other non-job-related characteristics. The Permit Coordinator is responsible for inspection scheduling, inspection reporting, and plan review processing, while completing organizational and administrative tasks to support the department's daily operations. Strong attention to detail and organizational abilities are needed to successfully sort and keep track of various time-sensitive tasks. The Permit Coordinator must be able to apply problem-solving and critical thinking skills for problem resolution when conflicts arise. Essential Duties and Responsibilities include the following. Other duties may be assigned. Process inspection requests and schedule inspections following company established procedures. Provides support for administrative functions in the assigned department. Answers incoming calls; processes mail, faxes, copying, FedEx shipments, etc. Manages the workload to ensure all tasks are completed within the established timeframes. Process final packets for Certificates of Occupancy or Completion. Assists clients to meet construction goals and timeframes. Identify and report conflicts or issues with scheduling and/or company databases. Communicates scheduling changes with staff and clients. Performs data entry and maintenance of company databases, directories and records. Performs a variety of essential record keeping duties, and maintains department record keeping and filing systems Process plans for review, acting as liaison between staff and client Assists with any other duty that is required to ensure inspections are scheduled and reported accurately. Performs other related duties, as directed. NOTE: Management retains the discretion to add to or change the duties of the position at any time. Experience: High school graduate with, at least, 3 years of office experience General knowledge of the Construction Industry Proficient with Microsoft Office programs Excellent communication skills with high level of English proficiency, both written and verbal, with an exhibited high level of professionalism. Extreme attention to detail, organizational and time management skills Skills: Knowledge of general office equipment- copier/fax/scanner, phone Problem-solving abilities Excellent customer service skills Must be able to understand and follow instructions Ability to work well with others in a collaborative team environment High energy level and able to work in a fast paced environment Computer Skills: Demonstrated knowledge of a variety of computer software applications in word processing, spreadsheets, document and database software (Outlook, Word, Excel, Adobe Acrobat). Work Environment: An employee in this position typically works in an office environment with controlled climate. Outside office travel is limited. Physical Demands: While performing the duties of this Job, the employee is regularly required to sit and work with computer systems for extended periods of time. The employee is occasionally required to lift up to 20 pounds. The vision requirements include: ability to adjust focus, distance vision and close vision.

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Aeronautics Systems is seeking an Entry Level Cable and Harness Technician to join our Manufacturing and Production team of qualified, diverse individuals in Melbourne, Florida. Responsibilities/Duties: Manufacture cable / harness products. Reads and interprets Work Instructions, schematics, wirelists, and drawings. Ensures quality of the hardware is maintained and company procedures are followed. Ensures work is done with completeness, accuracy, adherence to operation sheets, ISO procedures, schedules, and assign tasks. Provides regular communication to shop leads and Work Center management on status and technical issues. Adhere to all required Personal Protective Equipment (PPE) and safety guidelines and regulations Work and communicate over ambient noise Work in a variety of work spaces/positions. Work spaces may include but are not limited to small, enclosed spaces, awkward, and elevated spaces. Positions may include bending, twisting, kneeling, crawling, ascending/descending ladders, and/or working overhead. Ability to work flexible, changing shifts, including weekends We offer flexible work schedules, phenomenal learning opportunities, exposure to a wide variety of projects and customers, and a very friendly team environment. We are looking for self-motivated, proactive, and goal-oriented people to help us grow our services and become even better at what we do. Basic Qualifications: High School diploma or GED and hobby/technical related experience in mechanical, composites, body work, electrical, or other dexterous activities. Must be able to lift up to 30 pounds, perform repetitive physical movements, and handle and assemble small parts. Ability to work any shift as needed by the business. Must be able to obtain and maintain DOD Secret clearance and Special Program Access within a reasonable amount of time Preferred Qualifications: Experience with Manufacturing Cable and Harness and ISO processes Able to read drawings and schematics Works well in a team environment Experience with Assembly harnesses Ability to read wire list Cable harness Braiding experience Active Secret DoD Clearance and Program Access last investigated within the last 5 1/2 years Able to travel domestically on short notice up to 25% of the time What we offer: At Northrop Grumman, we are on the cutting edge of innovation -- building the next generation of sophisticated aircraft to protect our country. Our diverse portfolio of programs means there are endless paths to cultivate your career. We are well-known for our inclusive, family environment, phenomenal learning opportunities, and exposure to a wide variety of projects and customers. We also offer comprehensive benefits including competitive medical and dental options, a great 401K matching program, college education assistance, annual bonuses, 14 Employee Resource Groups inclusive of all employees, and opportunities for career advancement across North America! Primary Level Salary Range: $36,300.00 - $60,500.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

OUC - The Reliable One, is presently seeking a Master Technician (Mechanical) - Chilled Water to join the Electric & Water Production division. At OUC, we don't just work - we're building a bright future of innovation and transformation for future generations. We are looking for an experienced Journeyman Chiller Mechanic (5 years) with strong mechanical experience. This highly knowledgeable, independent professional will be responsible for complex troubleshooting, service and maintenance of mechanical equipment including chillers, cooling towers, pumps, fans, gears, compressors, piping, valves etc. In this role, the Journeyman will be working at our Epic facility which is outfitted with some of the latest and greatest equipment and technological advancements. The ideal candidate will be comfortable working independently in a high noise environment. Some work may require working from ladders, platforms, and scaffolds from elevations over 100 feet necessitating keen attention to detail and safety consciousness. OUC is an industry leader and the second largest municipal utility in Florida committed to innovation, sustainability, and our community, OUC's mission is to provide exceptional value to our customers and community by delivering sustainable and reliable services and solutions. Join a team of visionary Change Agents, Strategists, and Community Ambassadors who understand the vital role of diverse experiences in powering creativity and industry transformation. At OUC, each position contributes to the success and achievement of our goals. Click here to learn more about what we do. The ideal candidate will have: High School diploma or equivalent education. Two (2) years of formal trade school training or two (2) years of equivalent experience with emphasis in HVAC mechanical equipment and chillers. Minimum of five (5) years of experience as a Journeyman Chiller Mechanic (not including equivalent education) in performing mechanical troubleshooting, repair and installation of chilled water plant equipment. Mechanical Master Technicians must have factory chiller training. Certified Universal Refrigerant License under EPA Section 608 of the Clean Air Act required. Valid Driver's License. OUC offers a very competitive compensation and benefits package. Our Total Rewards package includes, to cite a few: Competitive compensation Low-cost medical, dental, and vision benefits and paid life insurance premiums with no probationary period. OUC's Hybrid Retirement Program includes a fully funded cash balance account, defined contribution with employer matching along with a health reimbursement account Generous paid vacation, holidays, and sick time Paid parental leave Educational Assistance Program, to include tuition reimbursement, paid memberships in professional associations, paid conference and training opportunities Wellness incentives and free access to all on-site OUC fitness facilities Access to family-oriented recreational areas Paid Conference and Training Opportunities Free downtown parking Click here to view our Benefits Summary. Salary Range: Starting at $41.924 per hour (Estimated $87,2019.92 annually) with a structured step progression system and performance-based pay increases every 6 months up to $48.138 per hour (Estimated $100,127.04 annually) - commensurate with experience Location: 6003 Pershing Ave., Orlando, FL 32822 Please see below a complete Job description for this position. Job Purpose: Performs one or more of the following specialized trades: Mechanical: Complex troubleshooting, service and maintenance of mechanical equipment including but not limited to chillers, cooling towers, pumps, fans, gears, compressors, piping, valves, etc. Electrical: Complex troubleshooting, service and maintenance of electrical equipment including but not limited to low (120V) and medium voltage (230/480V) switchgear, relays, etc. Instrumentation: Complex troubleshooting, service, maintenance and validation of instrumentation equipment including but not limited to HVAC systems, electronic circuits, programmable controllers, energy delivery stations, BTU Meters, transmitters, BACnet devices; and basic programming of trends, graphics and alarms. Primary Functions: Install, maintain, troubleshoot and service all types of mechanical, electrical and instrumentation systems under minimum supervision. Ensure the safety of all equipment and personnel in the course of performing job duties. Provide supervision to technicians and contractors during maintenance and repair activities. Utilize the OUC LOTO system at all times. Identify and execute appropriate refrigerant recovery techniques and safety procedures used during the detection and repair of refrigerant leaks. Read and understand equipment manuals, blueprints, flowcharts, and other technical data. Report and document maintenance performed utilizing computer systems and spreadsheets. Work independently and possess excellent customer service skills. Work extended hours when required. Non-Essential Functions: Perform emergency maintenance and maintain Chilled Water Plants and equipment during abnormal conditions (adverse weather, chemical spills) with minimal supervision using all proper safety equipment including SCBA. Assist in general plant cleanliness duties. Technical Requirements: Willingness to work extended hours when required, including nights, weekends, and holidays. Working knowledge of general industrial safety skills. Demonstrated verbal and written communications skills. Ability to read and understand mechanical, structural, and piping and instrumentation drawings. Ability to read electrical schematic drawings, logic diagrams, electrical one line drawing, and electrical three line drawings in the performance of job duties. Ability to read control loop drawings, piping and instrument drawings, and logic drawings in the performance of job duties. Basic computer skills. Education/ Certification/Years of Experience Requirements: High School diploma or equivalent education. Two (2) years of formal trade school training or two (2) years of equivalent experience with emphasis in one or more of the following areas: 1) HVAC mechanical equipment; 2) electrical systems; 3) instrumentation systems. Minimum of five (5) years of experience (not including equivalent education) in performing mechanical, electrical or instrumentation troubleshooting, repair and installation. Mechanical Master Technicians must have factory training; Electrical Master Technicians must be licensed by the State of Florida; and must possess master skills to execute the scope for low (120V) and medium voltage (230/480V) systems under minimum supervision;. Instrumentation Master Technicians must have factory training in programmable logic controllers; Certified Universal Refrigerant Transition and Recovery Technician under EPA Section 608 of the Clean Air Act required. Valid Driver's License. Working Conditions: This job very frequently involves exposure to chemicals and working in a high noise environment. This job frequently involves exposure to extreme weather, insects, heights, confined areas, and heat. This job occasionally involves exposure to noxious fumes. Chilled Water Plant environment includes rotating equipment, electrical equipment, high noise areas, and elevations exceeding 100 feet. Will be required to work from ladders, platforms, scaffolds or platforms while performing duties. Chilled water plants are a high noise environment. Occasional exposure to water treatment chemicals within the chilled water plants. Physical Requirements: This job consists of very frequent standing, walking, lifting up to twenty (20) lbs, bending/stooping, reaching over head, speaking/hearing, and detailed inspection/reading/editing. This job consists of frequent lifting (21-40) lbs, pushing, pulling, and/or digging, climbing (ladders, stairs, hills), and typing/CRT (attention to detail). This job consists of occasional sitting, lifting (50+) lbs, kneeling and/or crawling, and writing. This job may involve occasional monitoring/operating cranes/hoists. This job consists of very frequent monitoring or operating vehicles such as pickup trucks/vans, shop tools (both hand and power operated) and/or test equipment. Must be medically qualified to conduct hazmat emergency response including donning and the use of an SCBA with a Level A Chemical Suit. OUC-The Reliable One is an Equal Opportunity Employer who is committed through responsible management policies to recruit, hire, promote, train, transfer, compensate, and administer all other personnel actions without regard to race, color, ethnicity, national origin, age, religion, disability, marital status, sex, sexual orientation, gender identity or expression, genetic information and any other factor prohibited under applicable federal, state, and local civil rights laws, rules, and regulations. EOE M/F/Vets/Disabled

at Whaley Foodservice ***HIRING IMMEDIATELY!!!**** ***Sign On Bonus Available for Qualified Service Technicians*** Whaley Foodservice, LLC is one of the largest commercial kitchen equipment repair service companies in the Southeast comprised of over 600 employees located across 31 geographically dispersed locations.Visit "Whaley Careers" to find your place to grow. ********************************* Pay Rate: $31.00-39.00/hour* At Whaley we know people are vital to our success. We offer a competitive salary, on-call pay, and generous benefits including Sign-On Bonuses for Experienced Technicians Company Vehicle | Mobile Device | Uniforms Meters & Test Equipment Industry Certification 401k & Profit Sharing Paid Holidays & Vacation Medical & Dental Benefits Short-Term Disability | Long-Term Disability Insurance (company paid) Life Insurance (company paid) To learn more about current opportunities, visit Whaley Careers: ********************************* Summary: The Service Technician II provides maintenance, service, and repair for commercial cooking equipment and commercial refrigeration i.e. grills, fryers, ovens, ice machines, reach-in and walk-in coolers, freezers, etc. Details Diagnoses, troubleshoots, and repairs commercial cooking kitchen equipment, refrigeration. Communicates status updates for part order(s) and repairs with branch support and customer. Completes service calls accurately and timely. Audits truck stock to ensure required parts are stocked. Ensures service vehicle, tools, and uniforms are consistent with Whaley standards of safety. Meets on-call requirements. Required Education | Experience Three years of experience in commercial kitchen repair and or refrigeration. Must be 18 years of age. Completion of a satisfactory background check and drug screen is required. Valid Driver's license and driving record that aligns with our safety standard. Skills and Abilities Ability to work independently Ability to accurately diagnose and troubleshoot: an automotive, electrical, installation, and mechanical background is a plus. Journeyman License and or CFESA certification not required but would be a plus. Strong attention to detail. Excellent communication and soft skills. Good driving record Whaley Foodservice is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Description ***HIRING IMMEDIATELY!!!**** ***Sign On Bonus Available for Qualified Service Technicians*** Whaley Foodservice, LLC is one of the largest commercial kitchen equipment repair service companies in the Southeast comprised of over 600 employees located across 31 geographically dispersed locations.Visit "Whaley Careers" to find your place to grow. ********************************* Pay Rate: $31.00-39.00/hour* At Whaley we know people are vital to our success. We offer a competitive salary, on-call pay, and generous benefits including Sign-On Bonuses for Experienced Technicians Company Vehicle | Mobile Device | Uniforms Meters & Test Equipment Industry Certification 401k & Profit Sharing Paid Holidays & Vacation Medical & Dental Benefits Short-Term Disability | Long-Term Disability Insurance (company paid) Life Insurance (company paid) To learn more about current opportunities, visit Whaley Careers: ********************************* Summary: The Service Technician II provides maintenance, service, and repair for commercial cooking equipment and commercial refrigeration i.e. grills, fryers, ovens, ice machines, reach-in and walk-in coolers, freezers, etc. Details Diagnoses, troubleshoots, and repairs commercial cooking kitchen equipment, refrigeration. Communicates status updates for part order(s) and repairs with branch support and customer. Completes service calls accurately and timely. Audits truck stock to ensure required parts are stocked. Ensures service vehicle, tools, and uniforms are consistent with Whaley standards of safety. Meets on-call requirements. Required Education | Experience Three years of experience in commercial kitchen repair and or refrigeration. Must be 18 years of age. Completion of a satisfactory background check and drug screen is required. Valid Driver's license and driving record that aligns with our safety standard. Skills and Abilities Ability to work independently Ability to accurately diagnose and troubleshoot: an automotive, electrical, installation, and mechanical background is a plus. Journeyman License and or CFESA certification not required but would be a plus. Strong attention to detail. Excellent communication and soft skills. Good driving record Whaley Foodservice is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

:** Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here (****************************** _._ **Job Posting External** **Job Duties** + Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. + Perform all assigned planned maintenance on customer lift trucks. + Maintain a service van and its inventory. + Process paperwork after completion of each job. **Minimum Qualifications** + Less than 2 years related experience + High school diploma or equivalent + Valid driver's license, good driving record, and ability to safely operate lift trucks. **Preferred Qualifications** + Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. + Good written/verbal communication and customer care skills. + Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. + Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. + Industry related training is preferred + Ability to read and understand service manuals, plan, and follow-through **Work Authorization:** Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. **Compensation and Benefits:** Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: + Award-Winning Service TrainingCompany Vehicle for Field Service TechniciansTool InsuranceNo Flat Rate40 Hours Per Week plus OvertimeUniformsSpecialty ToolsPrimarily 1st ShiftCareer Advancement Opportunities EOE Veterans/Disabilities

Job Description Covenant Roofing is seeking a skilled and detail-oriented Roof Repair Technician to join our Service and Repair team. The ideal candidate will have experience in diagnosing, repairing, and maintaining various types of roofing systems. As a Roof Repair Technician, you will play a crucial role in ensuring the longevity and safety of our clients' roofs by delivering high-quality repair services. Key Responsibilities: Inspect and Diagnose Roof Issues: Perform thorough inspections to identify leaks, damaged shingles, flashing issues, and other roofing problems. Execute Repairs: Repair a variety of roofing systems, including shingle, metal, tile, and flat roofs. This includes replacing shingles, repairing leaks, and addressing any structural issues. Safety Compliance: Adhere to all safety regulations and protocols to ensure a safe working environment for yourself and others. Customer Interaction: Communicate effectively with clients, explaining the scope of repairs needed and answering any questions they may have. Documentation: Maintain detailed records of work performed, including materials used, time spent on repairs, and any additional observations. Quality Assurance: Ensure all repairs meet company standards and client expectations by performing final inspections and addressing any remaining issues. Collaboration: Work closely with the Service and Repair Department Manager and other team members to ensure efficient and effective service delivery. Qualifications: Experience: Minimum of 3 years of experience in roof repair, with a strong understanding of various roofing systems. Skills: Proficient in the use of hand tools, power tools, and other equipment necessary for roof repair. Strong problem-solving skills and attention to detail. Physical Requirements: Ability to work at heights and walk a sloped roof unassisted without any issues, lift 50lbs overhead unassisted, and perform physically demanding tasks in various weather conditions. Must be able to climb a ladder unassisted. Driver's License: Valid driver's license with a clean driving record. Must be able to pass a pre-employment drug screen and background check. What We Offer: Competitive salary and benefits package. Opportunities for professional growth and development. A supportive and team-oriented work environment. Comprehensive training on the latest roofing technologies and safety practices. Benefits: 1. Medical Insurance 2. Dental Insurance 3. Vision Insurance 4. 401K with employer matching 5. Vacation and sick pay 6. Paid Holidays 7. Life insurance and supplemental insurance options

Job DescriptionWe are a Generator Sales, Service & Repair Company looking for Service Tech's that want a good paying job, and a rewarding career. Benefits include Health Insurance. Paid Vacation and Paid sick time. Experience preferred but will train the right individual. Must have own tools. Must have basic knowledge of Engines and Basic electronics. Apply today! Please send resume to: Gene Seissiger ************ **********************

Job DescriptionBenefits: QSEHRA Safety equipment provided 401(k) 401(k) matching Competitive salary Dental insurance Flexible schedule Free uniforms Health insurance Opportunity for advancement Paid time off Parental leave Training & development Vision insurance ASSE 6040 Medical Gas Technician Location: Orlando, FL Pay Range: $60,000 $75,000 per year Job Type: Full-Time About Compliance Solutions, LLC Compliance Solutions, LLC is a leading provider of medical gas compliance and testing services across the healthcare industry. We help hospitals, surgery centers, and healthcare systems maintain the highest standards of safety and regulatory compliance. Our mission is to deliver exceptional service, technical precision, and reliabilityempowering our clients to meet every standard with confidence. Position Overview We are seeking an experienced ASSE 6040 Medical Gas Technician to join our growing team in Orlando, FL. The ideal candidate will hold an active ASSE 6040 certification and have hands-on experience with the inspection, testing, and maintenance of medical gas and vacuum systems. This role requires a high level of technical expertise, attention to detail, and commitment to safety and compliance. Key Responsibilities Perform inspections and functional testing of medical gas and vacuum systems per ASSE 6040 standards Verify the integrity and operation of piping systems, outlets, zone valves, alarms, and related components Document inspection results and testing data thoroughly and accurately Identify deficiencies, communicate findings to clients, and recommend corrective actions Collaborate with healthcare facility staff to support compliance and safety initiatives Maintain up-to-date knowledge of ASSE standards, NFPA 99, and other applicable regulations Requirements Active ASSE 6040 certification (required) Minimum 1 year of experience in medical gas system installation, testing, or maintenance Strong working knowledge of ASSE and NFPA 99 standards Exceptional attention to detail and documentation accuracy Professional communication and interpersonal skills Ability to work independently and within a team environment Commitment to safety, compliance, and quality service Benefits Competitive salary ($60,000$75,000 based on experience) Health, dental, and vision insurance Retirement savings plan Paid time off (PTO) Flexible schedule and on-the-job training Relocation assistance (for qualifying candidates) Referral bonuses and performance-based incentives Tools and safety equipment provided License/Certification ASSE 6040 Certification (Required) Work Location On the road (Field-based) Ability to commute to or relocate within the Orlando, FL area required Employer-provided relocation package available

Build your best future with the Johnson Controls team As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive base salary and a comprehensive bonus program. Three weeks paid vacation in a calendar year/holidays/sick time/three PTO days in a calendar year. Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one. Extensive product and on the job/cross training opportunities Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Providing Scheduling and management support. JCI Employee discount programs (The Loop by Perk Spot What you will do Perform HVAC Control systems programming, troubleshooting, installation, commissioning, and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components. Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment. Provide front line technical and repair support through effective communications with Johnson Controls customers. Provide HVAC Controls system repair and/or update recommendations and assist in proposing of recommendations to Johnson Controls customers. Be part of an expanding team of the best technicians in the industry while you build career with a first-class global organization. How you will do it Loading Johnson Controls field and network level controller software. Performing commissioning and system diagnostics for all levels of system controllers as well as end devices (i.e. Sensors, actuators, etc.) and complete all required commissioning documentation. Keeps management and JCI contractor or customer informed of job progress and issues. Calibrates systems requiring basic electronic test equipment. Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation. Documents changes and provides information for as-built documentation. Execute company sponsored as well as personally initiated training to ensure the highest level of knowledge and capability are maintained Engage with customers to fully understand their systems and needs. Communicates with the JCI contractor or customer upon arrival and before leaving the work site. Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety. What we look for Required: HVAC Controls Experience Strong understanding of HVAC systems, sequence and applications Demonstrated technical aptitude in mechanical and electro-mechanical fields Able to use hand, power tools and electrical testing equipment such as a multi meter. Solid knowledge base in use of personal computers. Attention to detail. Good communication and listening skills. (Depending on location, the mounting and termination of low voltage devices may have special licensing requirements.) HIRING HOURLY RANGE: $26.92 - $35.58 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Summit Broadband Inc. is a cutting edge, fiber-based broadband provider delivering best in class residential, commercial, and hospitality technology solutions. This growing, dynamic high-tech company headquartered in sunny Central Florida, is seeking a Fiber Splicing Technician to join our Outside Plant team and grow with us. The new Summit Broadband is poised for an incredible future fueled by team members dedicated to being the best. Position Summary: The Fiber Splicing Technician must have very strong customer service skills. This employee will spend time in customer premises and will also interface with high level clients and management teams. Customer service both while installing and during troubleshooting operations is critical to this position. This individual will be responsible for all tasks associated with customer installation. This position will also be responsible for all fiber splicing both new construction and repairs. Technical responsibilities: Responsible for splicing of fiber optic and Copper Cable for new construction, repair, and maintenance Responsible for the installation, repair, and maintenance of all Summit Broadband's products and services through field operations as follows: Telephone Copper, Coax, Fiber Cable TV Coax, Fiber, Set Top Boxes, Cable Modems Internet Cable Broadband (Coax), Fast Ethernet and Gigabit Ethernet networks (Cat5/Cat6), DSL (Twisted-pair Copper), Fiber Ethernet (Fiber) Home and Small Business Networking Basic Wireless/Wire LAN services Basic Network Security Business Networking: Install and maintain DS1 level circuits Install, repair, and maintain channel banks Basic Business Class Telephony Testing Setup and test rotary, sequential Hunt Groups Basic installation and repair acceptance testing of light levels, RF levels, metallic Loop Test Basic central office wiring Installation, repair, and maintenance of inside wire including twisted pair copper, Cat5, and Coax Basic troubleshooting of small home and office LAN networking and configurations Ensures customer satisfaction by providing quality service and identifying customer needs. General responsibilities: Responds to the needs of a 24/7/365 operation Must be able to work after hours and weekends. Remain in service during outages until resolved Remain in a state of readiness to handle call issues when on call. Readiness includes being in local market, be in a state of mind so as to perform service and having company provided communications equipment ready to receive calls. Must be able to work emergency schedules during natural disasters and network outages Requirement to meet up-selling and upgrading of customers with additional Summit Broadband's products and services Full accountability in safety, productivity, quality, workmanship and customer service Maintain vehicle in a clean and professional manner Dress in approved Summit/OTC branded clothing and arrive to work in a neat and professional manner Ability to multi-task Ability to deal with and solve problems using solid judgment skills Uses excellent hearing and listening skills to receive detailed information Other duties as assigned including non-technical Requirements Job Qualifications: Must have valid driver's license with a clear MVR Employee is required to drive during night time conditions You must have close vision, color vision, depth perception and the ability to adjust your focus with good hand-eye coordination Must be able to pass standard background check Must pass pre-employment and compulsory drug screening High School Diploma or General Education Degree (GED) required Three to five years telecommunications experience required Must be able to lift 75 lbs repeatedly Must be able and willing to climb ladders and work on utility poles Must be able and willing to work in adverse weather conditions and attics and crawlspaces This job could require working from a bucket truck and performing various work duties from such an environment Must have and maintain own required hand tools Computer skills to sufficiently process trouble tickets Knowledge of Excel and Word Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Summit Broadband, Inc. is an Equal Opportunity Employer. The Company participates in the E-Verify program.

Central Florida Toyota, a Penske Automotive Group dealership, is looking for Technician Helpers to join our team and deliver extraordinary customer experiences. JOIN OUR TEAM At Penske Automotive Group (PAG), we strive to create a positive and challenging workplace that promotes excellence and achievement, and we aim to deliver the very best experience possible to our customers. We are looking for dedicated and motivated professionals who share that same passion to join our team. Imagine working in a professionally and financially satisfying job where you have the opportunity to make a positive impact on our organization and customers every day. As a Technician Helper, you will assist the Service Technician as they diagnose and repair vehicles and perform basic preventative maintenance and vehicle repairs in accordance with manufacturer's standards and company polices. If you are currently enrolled in the Toyota Technician Training & Education Network Program (T-TEN), we encourage you to apply! WHAT WE HAVE TO OFFER Fortune 500 company, ranked among the "World's Most Admired Companies" by Fortune Magazine Consistently recognized by Automotive News as among the "Best Dealerships to Work For." Comprehensive benefits program, including health care options (medical, dental and vision) and 401k savings and retirement plan with company match. Training, resources and opportunities for career growth and advancement, tailored to individual performance, experience and interests. Values-driven culture built on integrity, professionalism, excellence, and teamwork. State-of-the-art facilities and excellent working conditions. WHAT WE ARE LOOKING FOR Genuine interest in providing an exceptional customer experience. Friendliness, enthusiasm, reliability, with a positive "team-player" attitude. Strong work-ethic with the ability to work in a fast-paced, results-driven environment. Safe working knowledge of shop tools and equipment, and dealership experience. Brand knowledge is preferred, but not required. Experience as an Express Technician, Lube Technician, or Oil Change Technician. WHAT YOU CAN BRING TO THE TABLE Commitment: Ensure our customers have a world-class service experience at every step along their ownership journey, especially in vehicle repairs. Excellence: Provide an unparalleled level of technical knowledge and expertise to help repair and maintain vehicles to the highest factory and dealership standards. Communication: Clearly and effectively communicate technical information regarding customer vehicles to Service Advisors. Accountability: Comply with all manufacturer standards of quality and timeliness for repairs and maintenance work and ensure that all estimates and work orders are accurate. Safety: Understand and comply with all federal, state, and local regulations that affect shop operations, such as handling and disposal of hazardous waste, OSHA, and use of safety and health personal protective equipment. APPLY WITH US! If you are ready for a rewarding career with competitive compensation and benefits, and opportunities to excel and advance, consider joining the Penske Automotive Group organization. Our interview process typically includes a phone interview, several in-person interviews, background check, reference check, driving record review and a drug screen. Be a part of the best customer experience team in the automotive industry... apply with us today! Penske Automotive Group is an equal opportunity employer and maintains a drug- and alcohol-free workplace. Some positions may require applicants to possess a valid driver's license and have a good driving record.

Westbrook Vision To be a thriving company that makes a lasting impact in Central Florida for generations to come. Westbrook Mission To create an employee experience so profoundly different that it leads to changed lives and customers for life. Job Type: Full-time Pay: $22.00 - $40.00 per hour Schedule: Monday to Friday - Pre-Scheduled Night and Weekend work (as needed) Employee Benefits: Health Insurance - 87% Paid by the Company (Employee Plans starting at less than $23 per week) Paid Time Off (PTO) Paid Holidays per year - 8 Paid Sick days per year - 3 (Paid out yearly if not used) Paid Hurricane Days - 3 Paid Paternity/Maternity Leave Paid Life Insurance Paid Dental Premiums Paid Long-Term Disability Insurance 401K Match - Plan Increasing up to 7½% Vision insurance and Free Prescription Safety Glasses Gym Membership Reimbursement Free Annual Premium Brand Work Boots Fun Team building Outings (Universal, Top Golf, and Andretti) AND MORE! Company-Funded Education Opportunities: HVAC Apprentice Program (HVAC) Manufactures' Training Language - Spanish and English Health and Wealth Education Emotional Intelligence, Leadership and Advancement Training Key Responsibilities of the Commercial Install Technician include: Install HVAC systems in commercial buildings. Read and interpret blueprints and schematics Select appropriate equipment and materials for installations Ensure that HVAC systems are installed correctly and in compliance with codes and regulations Work with other trades to complete projects Follow all safety protocols and regulations Provide excellent customer service Keep accurate records of installations Qualified candidates will have: High School Diploma or G.E.D. (Preferred) 2 years minimum of experience as an HVAC install technician HVAC certification or license (Preferred) Strong knowledge of HVAC codes and regulations Proficient in reading and interpreting blueprints and schematics Strong problem-solving and critical thinking skills Excellent customer service skills Ability to work independently and as part of a team Must have a valid driver's license (If you do not meet the qualifications above, please see our job posting for Commercial Install Apprentice) We are both a Drug Free Workplace and Equal Opportunity Employer. Our employee selection process includes the following: drug testing, background check, driving record check, pre-employment assessments, and reference interviews with previous employers.

Earn $40,000-85,0000 a year! Signing Bonus! Flexible Hours! Unlimited Income Opportunity! Training Provided! Up to 3 weeks vacation! Have you ever worked on.... HVAC Systems? Kitchen Appliances? Sewing Machines? Marine Motors? Electric Motors? Than this job is for you! Come join our professional, talented service team today! Quote and repair equipment, such as auto-scrubbers (even some are Robotic), vacuums, floor machines and extractors, you will have a great time and create great memories in doing so! Requirements Job Requirements: Ability to install, repair, service, test and troubleshoot equipment Must be able to read schematics and diagrams Excellent communication, interpersonal and diagnostic skills Working knowledge of the equipment needed for the job Ability to work independently without much supervision Must be able to meet the physical requirements of the job which include bending, lifting heavy equipment and working in confined spaces driver's license and reliable transportation Ability to effectively manage time