Service technician jobs in Midland, TX

Job DescriptionCompany Profile BlueFin, a GATE Energy Company, is a leading independent service company with a suite of project execution niches and specialty equipment, covering a full range of pipeline and process, mechanical, intelligent completions, and fluid flushing and filtration services. Our clients range from Operators to General Contractors in the upstream and midstream market sectors of the oil and gas industry. This position is based in Odessa, Texas. Job Summary Serve as Lead Service Technician working in the Completion Services Department for land and offshore. Responsible for execution of tasks as assigned by the Lead Service Technician, Service Supervisor, Project Manager, or other Management. Is operationally qualified, verified, and authorized as required for specific tasks. May lead limited scope projects in the absence of a Lead Service Technician or Superior during a shift with prior approval from and/or under the direction of the Lead Service Technician or Superior. Specific job tasks would include but not be limited to Installation and/or retrieval of Permanent Gauge Systems, Control Line, TEC & Flatpack, Fiber Optics, Chemical Injection Systems, Gas Lift Mandrels & Valves. The Lead Service Technician will conduct all activities in an accountable, respectful, and professional manner at all times and fully support the completion of work in accordance with BlueFin quality and safety standards. Essential Duties and Responsibilities Travel through United States and Gulf of Mexico; staying overnight for extended periods. Proven ability to lead and supervise a field work crew in the task at hand. Communicate effectively with co-workers both office and field related. Good written and verbal communication skills. Ability to train and develop Service Technicians. Direct and perform field services as directed and in accordance with work plan, procedures and/or SOP, and ability to distinguish the work at hand from the work plan/procedure and how to proceed while making field decisions to drive the project. Knowledge and proven ability to operate equipment utilized in Completion Services and to train employees on such equipment. Service, maintain, repair, and test equipment/ tools for pre/post jobs or as instructed in shop. Write or participate in writing JSA's for job task assigned. Load/ unload equipment when required. Learn all field services work and equipment in order to gain skills/knowledge. Increase knowledge and participate in training on other product lines and services. Participation and Compliance with BlueFin HSE and Quality Management System. Comply with all company policies (Safety, quality, general, SOP's, etc). Available 24-hour call (except for scheduled vacation). Have reliable means of transportation to and from BlueFin office. Experience and Education High School Diploma or GED. Preferred 5-10 years of Completions experience. Must hold or ability to obtain Certificates for Marine Trash & Debris, Huet, Water survival, Safe Land/Safe Gulf, Fall Protection, Incipient Fire and Rigging at a minimum. Physical Requirements Must pass required Fit for Duty Exam Ability to drive for extended periods of time. Able to perform demanding physical labor in harsh environments on land and offshore. Bluefin is an Equal Opportunity Employer.

Reinvigorate your career with an organization that values teamwork, expertise, and integrity. We're looking for an experienced Lead Valve Services Technician to join our growing team and take a leadership role in managing valve service operations, customer relationships, and business growth opportunities. This position is ideal for someone with hands-on relief valve experience, strong organizational and communication skills, and a passion for delivering top-quality service in the oil and gas industry. Who we are: At the Crimson Group, we provide our clients with high-value automation, instrumentation, electrical design, and process operation solutions. With the capabilities of a large enterprise, and the agility and responsiveness of a small company, we are a customer-focused provider of automation and integrated solutions. Crimson Group provides total integration of design, project management, panel manufacturing, installation/commissioning, maintenance, and repair for North America and select international markets. What we Offer: Competitive hourly compensation. Comprehensive benefit package and 401k plan. A company laptop and cell phone reimbursement. An environment of continuous learning with the opportunity to enhance your skills & experience and grow within the organization. The opportunity to participate in charitable events through our charity, RedTail Community Foundation. What you will be Doing: Oversee and execute valve testing, inspection, repair, and maintenance activities. Assist with scheduling, resource allocation, and service documentation for multiple client projects. Develop and maintain strong client relationships to ensure satisfaction and repeat business. Lead, mentor, and support valve technicians in the field and shop, ensuring safety and quality standards are upheld. Perform or supervise testing and calibration of relief valves to meet company and safety standards. Assist in troubleshooting and problem-solving of complex valve issues. Track project progress, costs, and customer requirements to ensure timely delivery. Collaborate with operations, sales, and management to identify growth opportunities in valve services. Support business development by identifying client needs and assisting with proposal or quote preparation. Maintain detailed records of work performed, certifications, and compliance documentation. Your Skills and Qualifications: 3-5+ years of hands-on experience with relief valves, safety valves, and related pressure control equipment. Previous experience in a lead technician, coordinator, or supervisory role. Proven customer service and account management skills with the ability to build trust and long-term relationships. Excellent leadership, communication, and organizational skills. Proficiency with scheduling tools, maintenance tracking systems, and Microsoft Office Suite. Ability to manage competing priorities and meet deadlines in a fast-paced service environment. A valid driver's license and willingness to travel occasionally to client sites. Technical training or certification in mechanical, instrumentation, or valve technology. Background in oil & gas, industrial maintenance, or manufacturing. Safety-conscious, reliable, and proactive approach to problem-solving. A results-driven mindset with a focus on quality, customer satisfaction, and continuous improvement. **As part of our commitment to maintaining a safe and professional work environment, the Crimson Group of Companies conducts comprehensive background checks and drug and alcohol testing on all prospective employees as part of the final offer process. These checks are intended to verify the accuracy of information provided by candidates and assess any potential risks to the company or its employees. All offers of employment are contingent upon the successful completion of these background checks.** Please note: We do not accept phone calls regarding job opportunities. To ensure fairness and consistency in our hiring process, all candidates must follow the application instructions outlined in the posting. Thank you for your understanding.

Company Profile BlueFin, a GATE Energy Company, is a leading independent service company with a suite of project execution niches and specialty equipment, covering a full range of pipeline and process, mechanical, intelligent completions, and fluid flushing and filtration services. Our clients range from Operators to General Contractors in the upstream and midstream market sectors of the oil and gas industry. This position is based in Odessa, Texas. Job Summary Serve as Lead Service Technician working in the Completion Services Department for land and offshore. Responsible for execution of tasks as assigned by the Lead Service Technician, Service Supervisor, Project Manager, or other Management. Is operationally qualified, verified, and authorized as required for specific tasks. May lead limited scope projects in the absence of a Lead Service Technician or Superior during a shift with prior approval from and/or under the direction of the Lead Service Technician or Superior. Specific job tasks would include but not be limited to Installation and/or retrieval of Permanent Gauge Systems, Control Line, TEC & Flatpack, Fiber Optics, Chemical Injection Systems, Gas Lift Mandrels & Valves. The Lead Service Technician will conduct all activities in an accountable, respectful, and professional manner at all times and fully support the completion of work in accordance with BlueFin quality and safety standards. Essential Duties and Responsibilities Travel through United States and Gulf of Mexico; staying overnight for extended periods. Proven ability to lead and supervise a field work crew in the task at hand. Communicate effectively with co-workers both office and field related. Good written and verbal communication skills. Ability to train and develop Service Technicians. Direct and perform field services as directed and in accordance with work plan, procedures and/or SOP, and ability to distinguish the work at hand from the work plan/procedure and how to proceed while making field decisions to drive the project. Knowledge and proven ability to operate equipment utilized in Completion Services and to train employees on such equipment. Service, maintain, repair, and test equipment/ tools for pre/post jobs or as instructed in shop. Write or participate in writing JSA's for job task assigned. Load/ unload equipment when required. Learn all field services work and equipment in order to gain skills/knowledge. Increase knowledge and participate in training on other product lines and services. Participation and Compliance with BlueFin HSE and Quality Management System. Comply with all company policies (Safety, quality, general, SOP's, etc). Available 24-hour call (except for scheduled vacation). Have reliable means of transportation to and from BlueFin office. Experience and Education High School Diploma or GED. Preferred 5-10 years of Completions experience. Must hold or ability to obtain Certificates for Marine Trash & Debris, Huet, Water survival, Safe Land/Safe Gulf, Fall Protection, Incipient Fire and Rigging at a minimum. Physical Requirements Must pass required Fit for Duty Exam Ability to drive for extended periods of time. Able to perform demanding physical labor in harsh environments on land and offshore. Bluefin is an Equal Opportunity Employer.

Perform complete over-haul and testing of all manufacturers control valves, actuators and positioners to include: Fisher, Masoneilan, Rotork, Automax, and others. Execute diagnostics and trouble-shooting in shop and field environments. Directly reports to the Operations Manager. Essential Job Functions Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern. Performs all duties as assigned and adheres to TEAM's Core Values. Perform control valve repair in accordance to TEAM's quality procedures. Directly communicate with customers. Work autonomously in valve repair process. Ensure all diagnostic, testing, and repair reports are in compliance with quality system. Job Qualifications Education preferred: high school diploma or GED equivalent. Minimum 3- 5 years of experience. Control Valve Manufacturers Training Courses and/or certifications preferred. Knowledge of HART Communicator or other diagnostic analyzer manufacturer required. 0 to 30% minimum travel requirement. Work Conditions Position is based out of a branch or site location. Field duties require indoor and outdoor work in a plant atmosphere. Interaction with other crew employees, as well as supervisors and client personnel. Working in plant and/or shop areas around production machinery with extreme noise levels. Must be able to wear safety equipment as required by the safety department for personal protection. May be at more than one job site in a day and must be able to tolerate climate changes. May be required to travel out of town on a periodic basis Physical and Mental Requirements Ability to lift and carry 75 pounds. Must be able to walk and climb except when performing non-field duties. Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations. Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties. Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations. Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells. Ability to maintain focus and multitask effectively. Excellent communication skills. TEAM provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

TEAM UP WITH US! The Technical Communicator II is responsible for providing internal and external customers with technical assistance. DO YOU HAVE WHAT IT TAKES? WHAT YOU'LL DO: * Assist technicians on assignments through the repair process to ensure timely, cost effective and quality repairs are being completed. * Coordinate and work with Caterpillar engineers in resolving product issues. * Answer technical requests and inquiries to resolve product problems through diagnosis, personal knowledge and expertise, research, manufacturing contacts and engineering data. * Recognize, document and report product issues and assist in determining root cause that significantly affect customer satisfaction, productivity and/or operations. * Travels to customer sites within assigned region to assist in complex troubleshooting and ongoing issues to gain a better understanding of the specific repair and establish improvements in the repair process. * Attends necessary training in order to stay up to date on new products and challenges. * Utilizes Caterpillar system resources, such as SIS web, Product Support CRM (PSCRM), Dealer.Cat.com, Dealer Product Support Search (DPSS), Service Information Management System (SIMS I) /Continuous Product Improvement (CPI), to diagnose issues and evaluate possible solutions. * Proficient in using professional phone etiquette to field customer calls. WHAT YOU'LL NEED: * Associate's degree (A. A.) or equivalent from two-year college or technical school; or five (5) year related experience and/or training; or equivalent combination of education and experience. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Moderate computer skills. Familiar with web navigation, experience working with databases. * Must have valid drivers license and clean driving record. * Ability to write routine reports and correspondence. * Ability to speak effectively before groups of customers or employees of organization. * Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. * Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. WHY WORK WITH US? * We like to take care of business and have fun doing it! * We offer health, dental, vision, life, and more as a comprehensive benefits package. * Don't you want to work with awesome people? IMPORTANT INFORMATION: While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; outside weather conditions and vibration. The noise level in the work environment is usually moderate. Required travel up to 20%. This position is considered a safety sensitive position. The Job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA

INDUSTRY: Equipment Rentals, Oil & Gas CONTEXT: We are seeking skilled Generator Technicians to repair and service MQ Power generators, as well as other major brands. Candidates with generator experience across multiple manufacturers are encouraged to apply. While there is no minimum years of experience required, managerial-level expertise will be highly valued. The ideal candidate will possess a strong technical background, including knowledge of controls, reprogramming, electrical circuits, and megger testing. A solid work ethic, problem-solving skills, and the ability to work independently are essential. RESPONSIBILITIES: Diagnose, repair, and maintain MQ Power generators and other generator brands. Troubleshoot and reprogram generator control systems. Inspect, test, and repair electrical circuits and related components. Perform megger testing to ensure electrical insulation integrity. Maintain detailed service records and follow company procedures. Support team members and provide leadership if in a senior role. QUALIFICATIONS: Generator repair/service experience (any brand). Strong technical skills in controls, reprogramming, and electrical circuits. Experience with megger testing preferred. Managerial or leadership experience is a plus. Reliable, self-motivated, and safety-focused.

About the Company Our organization is dedicated to upholding strong core values and leading the dewatering and groundwater management industry through continuous improvement and innovation. We take pride in partnering closely with clients to understand their unique needs and provide engineered, cost-effective, and high-quality solutions delivered safely and efficiently. Our success is built on the expertise and dedication of our team - professionals who are empowered, knowledgeable, and committed to excellence. We value long-term relationships with our clients and stakeholders, founded on integrity, respect, and performance, which serve as the cornerstone for every project we undertake. Job Summary We are seeking a Pump Mechanic / Equipment Technician to perform hands-on maintenance, troubleshooting, and repair work on pumping and related mechanical systems. Key Responsibilities Perform routine maintenance, cleaning, and lubrication on equipment and vehicles. Disassemble and reassemble pump systems using hand tools and lifting equipment. Operate and inspect rental or branch equipment to identify issues or mechanical defects. Overhaul, rebuild, and test equipment to ensure reliable operation and efficiency. Examine mechanical components for wear or damage, and repair or replace as necessary. Troubleshoot and repair electrical and control systems related to pumping equipment. Conduct performance testing after repairs to confirm proper functionality and compliance with specifications. Perform light fabrication and welding tasks when needed. Order, track, and maintain inventory of parts and service materials. Maintain accurate records of maintenance and repair activities. Keep the work area clean, organized, and compliant with safety standards. Follow all safety procedures and company policies. Perform additional duties as assigned by management. Qualifications Minimum of 2 years of relevant mechanical or equipment service experience required. Experience with diesel engines, pumps, and pipeline or fluid-handling equipment preferred. Familiarity with diagnostic and service software for industrial or diesel equipment a plus. Ability to work independently and troubleshoot complex mechanical systems. Strong attention to detail and commitment to quality workmanship. Excellent communication and interpersonal skills. Customer service-oriented with the ability to represent the company professionally. Strong organizational and multitasking abilities. Positive attitude and willingness to learn.

Job Description Founded in 1934, Griffin Fluid Management is the leader in dewatering and groundwater control. We are guided by an unwavering commitment to our core values, and we aim to lead the dewatering and groundwater control industry through a continual improvement process, leading to our profitable growth. We diligently cultivate relationships with clients to help determine their dewatering, groundwater control and pumping related needs, tailor an engineered, cost-effective, first-class solution to meet the needs and deliver the solution in a safe, timely, courteous, and professional manner. We recognize that our past and future success heavily relies on the efforts of our empowered, knowledgeable, experienced, dedicated, and valued employees. We constantly strive to build lasting relationships with our clients and stakeholders through integrity, respect and performance providing a solid foundation for all of our projects. More information about our company is available at ****************************** and on our company's page on LinkedIn. Job Summary Performs hands-on maintenance, troubleshooting/assessment, and repair work on pumps. DUTIES AND RESPONSIBILITIES: · Cleans, lubricates, and performs other routine maintenance work on equipment and vehicles. · Dismantles and reassembles pump equipment using hoists and hand tools, as needed. · Operates and inspects all rental and branch equipment to diagnose defects. · Overhauls and tests equipment to ensure operating efficiency. · Examines parts for damage or excessive wear, repairing and replacing damaged or worn parts. · Troubleshoots and rewires electrical systems. · Tests mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturer's specifications. · Light fabrication. · Researches, orders, and maintains the inventory of parts for service and repairs. · Performs other related duties as assigned by management. · Maintains proper records in compliance with Griffin standards. · Maintain a neat & organized work area. · Perform all tasks in a safe manner. · Perform additional duties as assigned QUALIFICATIONS: · 2+ years related experience or equivalent required. · Experience with diesel equipment, pumping equipment and pipeline specific equipment preferred but not required. · Experience with service programs such as John Deere Service Advisor, CAT and Cummins preferred but not required. · Ability to work independently performing in-depth technical equipment service and maintenance. · Commitment to excellence and high standards. · Must be able to interact with customers on a professional level. · Strong oral communication and interpersonal skills. · Ability to accurately take measurements, complete documentation to ensure quality craftsmanship, and reference proper standards. · Acute attention to detail, positive attitude. · Ability to manage priorities/workflow and multitask. Benefits Full-time Employees may choose to participate in benefit plans including: health, dental, and vision coverage. Full-time employees are also eligible to participate in the company sponsored 401K Plan, with matching, short-term and long-term disability, life insurance, a company matched health savings account, and paid time off. Full-time employees may also be eligible for tuition assistance benefits. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Title and/or Salary may be adjusted based on the applicant's experience or skills.

Main Duties & Responsibilities Primary Job Role Conducts all assigned work in a safe manner, adhering to all applicable safety, environmental and contamination control policies, procedures and regulations. Wears proper personal protective equipment. Attends and successfully completes required technician training classes. Maintains necessary set of tools required for job performance to diagnose, disassemble and assemble components to manufacturer's specifications. Diagnose and perform designated repairs on customer or company owned equipment including, but not limited to, mechanical, electrical, hydraulic troubleshooting, maintenance and repairs. Works in a neat and orderly fashion, constantly looking for ways of improving the methods of work, work area, and safety standards. Inspects components to insure maximum parts are being reused to control repair costs. Completes required documentation utilizing appropriate software to document repairs performed on equipment, and accounting for repair times. Monitors job expenses versus repair estimates and ensures that the supervisor is aware of any cost over run, prior to the job being completed. Approaches work in a positive manner, maintains conduct that is supportive of the work Team and sets the standard for others to follow. Contributes to Team efforts by accomplishing tasks on time while maintaining safety and quality expectations. Trains and/or mentors others in department. Assumes Supervisors positon temporarily, as necessary. Performs other duties as assigned. Essential Job Competencies Safety: fully supports, encourages and follows safe work behavior, and considers safety of paramount importance in the workplace. Job Specific Skills: Demonstrates the required depth and mastery of knowledge and skill associated with the job as identified in the Learning Management System (LMS) and other applicable sources. Demonstrates the effective application of the job specific knowledge, skills and ability required to resolve job related challenges in the workplace. Refer to job specific training requirements for the job identified in the LMS. Communication: Uses active listening skills, conveying information with the appropriate medium that is clear and easily understood. Uses feedback to verify effective and accurate communication has occurred. Ensures that others having a need to know are kept informed about developments, progress, problems and plans through consistent, effective communication. Avoids surprises. Information Gathering: Checks all appropriate sources in identifying the information needed for analysis and decision making. Uses skillful methods in obtaining high quality relevant information. Checks work to ensure accuracy and completeness. Compares observations or finished work to what is expected to find inconsistencies. Clearly documents sources, and organizes the information according to the research needs. Takes Initiative: Takes appropriate action to resolve issues without requiring direction. Seeks out others involved in a situation to learn their perspectives. Makes difficult decisions in a timely manner. Is willing to make decisions in difficult or ambiguous situations, when time is critical. Assertive in a group when it is necessary to facilitate change, overcome an impasse, face issues, or ensure that decisions are made. Results Oriented: Has a strong sense of urgency and commitment to achieve desired results in the face of obstacles and frustrations. Remains focused, does not get bogged down in unnecessary detail. Identifies and utilizes the most efficient methods to successfully achieve tasks on time despite unforeseen events. Driven, maintains a sense of urgency and adjusts schedules as needed to achieve without sacrificing quality of work. Adaptability: Adapts to changing business needs, conditions, and work responsibilities. Adapts approach, goals, and methods to achieve solutions and results in dynamic situations. Recovers quickly from setbacks, and finds alternative ways to reach goals or targets. Open to different and new ways of doing things; willing to modify one's preferred way of doing things. Credibility: Demonstrated concern to be responsible, reliable, and trustworthy. Maintains commitments. Respects the confidentiality of information or concerns shared by others. Is honest and forthright with people. Takes personal responsibility for the quality and timeliness of work. Punctual, follows instructions, policies, and procedures. Personal Development: Takes responsibility for personal learning and development by acquiring and refining technical and professional skills needed in job related areas. Obtains developmental opportunities proactively. Actively seeks and embraces growth opportunities. Company Overview In 1962, Ring Power Corporation became a full-line Caterpillar dealer in North Florida, and later expanded its authorized territory to include Central Florida. Today, Ring Power Corporate headquarters in St. Augustine oversees the operations of 18 branch locations throughout the state of Florida, including large regional facilities in Tampa and Orlando and crane and forklift sales and service facilities in Pompano. Ring Power also has eight facilities outside of Florida - The Carolinas, Georgia, Texas & Tennessee- to serve the needs of other specialized industries and customers. Ring Power Corporation has become one of the largest Caterpillar dealers in the Southeastern United States through dedication to the mission of customer service. In order to preserve the "Customers First" reputation that Ring Power was built on, we continually train our employees and work closely with our customers to assure complete satisfaction, especially after the sale. Currently, more than 2,300 employees at 20+ locations throughout Florida and the United States work hard to provide the highest quality construction equipment, backed by responsive, professional service and support at every level Qualifications Education and Experience Formal Education High School diploma or GED Experience 5-6 years Required / Credentials Completed all required training curriculum to be designated a Tech I. Able to easily and effectively comprehend written material and communicate orally and in writing with employees and customers. Not Required but Highly Desired Criteria Proficient in the use of a computer, Microsoft Office products and relevant Dealer software programs. Successfully completed relevant specialized equipment technical courses. Updating of Knowledge Job requirements frequently change requiring re-training once or more per year. Responsibility for Change, Innovation, Overall Improvement, and/or Effectiveness Problem Solving Job requires complex problem solving skills in a dynamic environment. Independent research and analysis are routinely required to develop appropriate solutions. Awareness and intervention is expected to prevent problems from occurring. Creativity Job requires creativity as part of carrying out daily activities. New approaches are encouraged. Autonomy Job is not normally monitored, but overall objectives are clearly defined. Use of discretion in how the work is done, setting priorities and decision making is encouraged. More emphasis is placed on achieving the desired outcome, not on controlling the process. Working Environment Stress Load Occasional exposure to these stresses (less than 20% of the time). Workload Fluctuation Job frequently involves changes in priorities, complexity and/or quantity of work. Work Schedule Work is scheduled during regular business hours with frequent requirements to work nights, holidays and weekends. Organizational Impact A person's performance in this job has considerable immediate impact on expense, efficiencies or achievement of overall department objectives. Supervisory Responsibility Job has no subordinates / no supervisory responsibility (may work independently or as a member of a team) Physical Demands · "NA": Not Applicable · "O": Occasionally - (up to 3 hours/day) · "F": Frequently - (3-6 hours/day) · "C": Constantly - (6-8 hours/day) F: Climbing O: Balancing O: Stooping F: Kneeling F: Crouching F: Crawling F: Reaching C: Standing F: Sitting F: Walking O: Feeling F: Fingering F: Grasping F: Repetitive Motion C: Talking C: Hearing F: Pushing - Up to 25 lbs. F: Pulling - Up to 25 lbs. F: Lifting - Up to 25 lbs. O: Pushing - 26-50 lbs O: Pulling - 26-50 lbs. O: Lifting - 26-50 lbs. O: Pushing - Over 50 lbs. O: Pulling - Over 50 lbs. O: Lifting - Over 50 lbs. Environmental Conditions · "NA": Not Applicable · "O": Occasionally - (up to 3 hours/day) · "F": Frequently - (3-6 hours/day) · "C": Constantly - (6-8 hours/day) C: Inside conditions: Protection from weather but not necessarily from temperature change. O: Outside environmental conditions: No effective protection from weather. O: Extreme cold: Temperatures below 32 degrees for periods of more than one hour. F: Extreme heat: Temperatures above 100 degrees for periods of more than one hour. F: Noise: sufficient noise to cause the worker to shout to be heard above the ambient noise level F: Vibration: Exposure to oscillating movements of the extremities of whole body. F: Hazards: Includes a variety of physical conditions (i.e. proximity to moving mechanical parts, electrical current, working in high places, exposure to heat and/or chemicals. F: Atmospheric conditions: One or more of the following conditions that affect the respiratory system or the skin: Fumes, odors, dust, mists, gases or poor ventilation. F: Oils: There is air and/or skin exposure to oils and other cutting fluids. O: Air particulates / contaminants: the worker is required to wear respirator. RING POWER CORPORATION, INC. IS AN EQUAL OPPORTUNITY EMPLOYER Not ready to apply? Connect with us for general consideration.

Who We Are Kirby-Smith Machinery, Inc. is a leading distributor of heavy equipment and cranes in the central United States. We are at the forefront of today's construction industry growth and have several exciting job opportunities for talented, energized professionals across the region who want to join our #WeAre1KirbySmith family! Heavy Equipment Shop Service Technician/Mechanic Benefits Above-Average Industry Pay Comprehensive Benefits Package (including Medical/Dental/Vision) 401K Plan with Company Match Generous PTO Package/Paid Holidays Short/Long Term Disability Growth Opportunities Paid Training Family-owned and Operated Health and Wellness Heavy Equipment Shop Service Technician/Mechanic Specific Benefits Relocation assistance available for qualified candidates Uniforms & Steel/Composite Safety Toed Boots provided Highly productive shop Continued education, manufacturer hands-on and web-based training Clean and professional work environment Company-paid Accident Insurance Heavy Equipment Shop Service Technician/Mechanic Position Purpose Responsible for performing quality work on various brands as effectively and profitably as possible. This includes diagnosing issues, ordering parts, writing technical reports, maintaining the care of company assets, and maintaining proper communication with others. Heavy Equipment Shop Service Technician/Mechanic Essential Functions Communicates and supports the Kirby Smith vision and core values of One Mission, One Team, One Plan, One Goal Performs Shop repairs and maintenance with little or no direct supervision Diagnoses and evaluates problems with equipment; makes repairs using established guidelines in accordance with established flat rates Plans methods and sequence of performing assigned repairs Notifies the Manager of any additional work required on the unit Models safe work habits and abides by company safety policies and procedures always Keeps rework within established guidelines Organizes, cleans, and maintains a safe work area Contributes to departmental and product line goals Completes required paperwork efficiently and promptly Attends factory and other training as specified by the supervisor Ensures that the shop equipment remains in optimal working order and is consistently maintained in a clean state Displays professional demeanor with customers, managers, and colleagues Promotes goodwill with customers and exhibits excellent customer relations behaviors Exhibits consistent and reliable on-site attendance Performs other job-related duties as assigned Heavy Equipment Shop Service Technician/Mechanic Minimum Qualifications High School Diploma or Equivalent Two (2) years' experience in diagnosing and repairing construction equipment Ability to read complex hydraulic and electrical schematics Furnish and maintain a set of hand tools and any special tools required by the company Ability to occasionally work overtime, stay overnight, and work on weekends when needed Maintain a valid driver's license Heavy Equipment Shop Service Technician/Mechanic Physical Requirements: Pushing/Pulling/Lifting/Carrying up to 100 pounds without assistance Physical ability to squat, twist, turn, bend, stoop, climb, and reach overhead Must be able to work in extreme heat or cold and wet, damp, dusty, or windy conditions and tolerate exposure to typical noises, hazardous materials, and fumes/odors associated with the shop Physical ability to perform maintenance on equipment for extended hours, with continual mounting and dismounting throughout the workday Ability to adhere to personal protective equipment (PPE) policy and maintain individual PPE in a functional condition This is considered a Safety-Sensitive position. We are an equal opportunity employer and prohibit discrimination or harassment based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Service Technician - Automotive We run an honest shop and need honest, hard-working techs. To be a success at our dealership, you need to have solid skills and solid ethics. We also know that to keep a good service tech, a dealership has to treat them right by paying them well and offering room for learning and advancement. Here, you'll work alongside some of the best in the business and make great money while doing it. If you love diagnosing and repairing vehicles while maintaining a positive attitude, then let's talk! Job Responsibilities Examine and diagnose vehicles Discuss repairs with shop foreman or service advisor Communicate additional service requests to service advisor Plan work in cooperation with shop foreman Provide labor estimates to service advisor Monitor repair time and update service advisor Maintain strict adherence to dealership policies on vehicle care and operation Complete story and/or documentation for client repairs Assist in mentoring technician trainees Attend company and factory training Keep current with factory technical bulletins Understand and follow federal, state and local regulations (such as disposal of hazardous waste) Education and/or Experience High school diploma or GED (general equivalency diploma); or 1 to 3 months related experience and/or training; or equivalent combination of education and experience. Certificates, Licenses, Registrations Operator Driver's License & State Inspection License Compensation Compensation is based on experience and commensurate with Fortune 500 companies. Benefits In addition to career-long personal development, our associates enjoy a number of benefits, including: Health, Vision & Dental Insurance 401k Paid Vacation Paid Holidays Bonuses About Our Dealership Welcome to Nissan of Midland! We have devoted ourselves to helping and serving our customers to the best of our ability. We believe the cars we offer are the highest quality and ideal for our clients life needs. From the moment you walk into our showroom, you'll know our commitment to our employees is second to none. Our Dealership is interested in finding talented individuals that are looking for a rewarding and challenging career in the automotive industry. We have varied career opportunities, ranging from Sales to Service to Management. If you possess the unique ability to consistently provide outstanding Customer Service and a dedication to Excellence, please complete the online application.

AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Summary We are seeking a skilled HVAC Compressor Technician to support plant operations by maintaining, troubleshooting, and repairing HVAC systems, with a focus on compressor units and chillers. This role is critical to ensuring optimal climate control and equipment performance across production facilities. The technician will work closely with maintenance and production teams to uphold safety, efficiency, and uptime standards. Responsibilities Perform scheduled and unscheduled maintenance on HVAC systems, including compressors, chillers, air handlers, and pneumatic controls. Diagnose and repair mechanical, electrical, and refrigerant-related issues in HVAC and chiller systems. Monitor system performance and conduct inspections to identify potential failures or inefficiencies. Support installation and commissioning of new HVAC and chiller infrastructure and upgrades. Maintain accurate logs of maintenance activities, inspections, and repairs. Ensure compliance with OSHA and internal safety protocols. Collaborate with production and facilities teams to minimize downtime and support operational goals. Assist with emergency repairs and participate in on-call rotations as needed. Required Qualifications High school diploma or equivalent. Minimum 3 years of experience in HVAC maintenance, with a focus on compressor and chiller systems. Familiarity with refrigerant recovery, ductwork, and control systems. Ability to read and interpret technical manuals, schematics, and blueprints. EPA Section 608 Certification (Type II or Universal). Strong troubleshooting and problem-solving skills. Basic computer skills for maintenance logging and reporting. Preferred Qualifications Technical certification in HVAC or related field. Experience with Trane, Carrier, or similar commercial HVAC and chiller systems. Knowledge of building automation systems (BAS) and PLC interfaces. Familiarity with maintenance management software (e.g., Rippling, CMMS). Work Environment Work is performed in a production plant environment with exposure to varying temperatures and noise levels. May require climbing ladders, working at heights, and lifting heavy equipment. Use of PPE is mandatory in designated areas. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Four dynamic, integrated companies make up the Transwestern enterprise, giving us the perspective to think broadly, deeply and creatively about commercial real estate. Clients and investors rely on us for expertise that spans institutional and opportunistic investment, development, hospitality, and brokerage and asset services. Our award-winning, collaborative culture empowers team members with resources and independence to work across boundaries in pursuit of innovative solutions, reinforcing a reputation for service excellence that translates to measurable results. Through offices nationwide and alliance partners around the globe, we positively impact the built environment and our communities while fostering a work climate that champions career vitality for all. Learn more at transwestern.com and @Transwestern. Part of the Transwestern companies, Transwestern Real Estate Services (TRS) strives to add value for investors, owners, and occupiers across all commercial property types. Fueled by a holistic perspective of the real estate life cycle, agility and creativity are hallmarks of our approach, while vast national resources and sound market intelligence underpin customized recommendations and property solutions. Transwestern is built on a common purpose - Empowering Good People to do Extraordinary Things Together. We are committed to the hiring of smart, passionate, hard-working people who understand the benefits of both collaboration and independence. POSITION SUMMARY: The HVAC Technician is responsible for performing skilled mechanical duties in the inspection, preventive maintenance, repairs, installation and alteration of the property's heating, ventilation, air conditioning (HVAC) and related equipment. The HVAC Technician's contact with tenants, prospective tenants, owners, and vendors is to be guided by the highest professional standards including positive, supportive, friendly behavior and legendary service. This is a dynamic, on-site role that places you at the heart of the action. As a result, an essential function of this position is working on-site. Remote or hybrid options are not available. Being on property allows you to build strong relationships with clients and tenants, respond in real time, and make a visible impact every day. POSITION ESSENTIAL FUNCTIONS * Inspect, repair, modify and install HVAC equipment including air conditioning compressors, receivers, condensers, chillers, cooling towers, pumps, automatic and hand valves, expansion valves and capillary tubes. * Conduct regular preventive maintenance inspections on all equipment including, isolated heating and ventilating units, boilers, gas and electrically operated HVAC equipment, and make necessary adjustments, service and repairs * Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, belts, compressors, heat exchangers, high limit controls, pressure controls, safety valves, and automated gas valves. * Operate a variety of hand and power tools, welding, vacuum pump, test equipment utilized in the trade. * Maintain equipment in effective and safe working condition. * Maintain parts and tools inventory utilizing the properties computer maintenance management system (CMMS). * Perform skilled electrical maintenance work in the repair, installation and alteration of HVAC equipment, components, timers, motors and wiring systems as needed; connect motors to control panels. * Maintain regular attendance. * Provide tools essential to performing troubleshooting, repairs, preventative maintenance on the HVAC and building equipment. * Assist the Engineering team in the training of the theory and practical knowledge of basic HVAC applications. * Perform skilled mechanical maintenance duties in the inspection, repairs, installation and alteration of heating, ventilation, air conditioning and related equipment and facilities. * Operate specialized machinery, equipment and tools utilized in the repair, installation and maintenance of heating, ventilation, air conditioning. POSITION REQUIREMENTS * High school diploma or general education degree (GED) and a minimum of two years of related experience and/or trade school training or equivalent combination of education and experience * :Standard practices of the HVAC trade * Theory and practical knowledge of HVAC systems and materials, methods and tools used in the operation and repairs of HVAC * Understand applicable building codes, ordinances and regulations of State and local authorities pertaining to HVAC and boilers. * Understand and follow current OSHA and ASHRAE guidelines. * Knowledgeable with the operations of: * Air compressors and pneumatic controls - DDC controls * Manual and electrical tools and equipment applicable to the HVAC trade * Welding and soldering techniques * Healthy and safety regulations * Basic record-keeping techniques * Proper methods of storing equipment, materials and supplies * Communicate effectively both orally and in writing. * Work cooperatively with others. * Work independently with little direction. * Meet schedules and timelines. * Maintain routine records and prepare reports. * Work is performed while standing, sitting and/or walking. * Requires the use of hands for simple grasping and fine manipulations. * Requires bending, squatting, crawling, climbing, reaching. * Requires the ability to lift, carry, push or pull medium weights, up to 75 pounds. * Requires activities involving being around moving machinery, exposure to marked change in temperatures and humidity, and exposure to dust, fumes and gases. * Applicants must be willing to travel to multiple locations as part of their duties and be "on-call" as needed. WORK SHIFT: First Shift (United States of America) LOCATION: Midland, TX This is a dynamic, on-site role that places you at the heart of the action. As a result, an essential function of this position is working on-site. Remote or hybrid options are not available. Being on property allows you to build strong relationships with clients and tenants, respond in real time, and make a visible impact every day. ABOUT US Transwestern's Guiding Principles are woven into the fabric of our firm and underscore the value of each individual team member. We embrace inclusion - not only as the right thing to do, but as a reflection of who we are. It is our responsibility and heartfelt desire to create an environment that elevates the human spirit and brings out the best in everyone. Different backgrounds, life experiences and cultures shape our individual perspectives and ultimately generate the best results for our clients. Strategic human capital planning combined with development initiatives foster a work environment that celebrates uniqueness and champions the achievements attained through collaboration. Please note that all candidates selected for an offer of employment are subject to pre-employment background checks, which may include but are not limited to, based on the role for which they have been selected: criminal history, education verification, social media review, motor vehicle records, credit history, and professional license verification. In addition, your employment with Transwestern is subject to successfully passing a drug screen check prior to your starting with the Company along with satisfactory references. We understand you have a choice when choosing where to work and pursue a career. We understand you are unique and have your story. We want to hear it. We encourage you to apply today so that you may become a part of the Transwestern story.

Job DescriptionSalary: Reinvigorate your career with an organization that values teamwork, expertise, and integrity. Were looking for an experienced Lead Valve Services Technician to join our growing team and take a leadership role in managing valve service operations, customer relationships, and business growth opportunities. This position is ideal for someone with hands-on relief valve experience, strong organizational and communication skills, and a passion for delivering top-quality service in the oil and gas industry. Who we are: At the Crimson Group, we provide our clients with high-value automation, instrumentation, electrical design, and process operation solutions. With the capabilities of a large enterprise, and the agility and responsiveness of a small company, we are a customer-focused provider of automation and integrated solutions. Crimson Group provides total integration of design, project management, panel manufacturing, installation/commissioning, maintenance, and repair for North America and select international markets. What we Offer: Competitive hourly compensation. Comprehensive benefit package and 401k plan. A company laptop and cell phone reimbursement. An environment of continuous learning with the opportunity to enhance your skills & experience and grow within the organization. The opportunity to participate in charitable events through our charity, RedTail Community Foundation. What you will be Doing: Oversee and execute valve testing, inspection, repair, and maintenance activities. Assist with scheduling, resource allocation, and service documentation for multiple client projects. Develop and maintain strong client relationships to ensure satisfaction and repeat business. Lead, mentor, and support valve technicians in the field and shop, ensuring safety and quality standards are upheld. Perform or supervise testing and calibration of relief valves to meet company and safety standards. Assist in troubleshooting and problem-solving of complex valve issues. Track project progress, costs, and customer requirements to ensure timely delivery. Collaborate with operations, sales, and management to identify growth opportunities in valve services. Support business development by identifying client needs and assisting with proposal or quote preparation. Maintain detailed records of work performed, certifications, and compliance documentation. Your Skills and Qualifications: 35+ years of hands-on experience with relief valves, safety valves, and related pressure control equipment. Previous experience in a lead technician, coordinator, or supervisory role. Proven customer service and account management skills with the ability to build trust and long-term relationships. Excellent leadership, communication, and organizational skills. Proficiency with scheduling tools, maintenance tracking systems, and Microsoft Office Suite. Ability to manage competing priorities and meet deadlines in a fast-paced service environment. A valid drivers license and willingness to travel occasionally to client sites. Technical training or certification in mechanical, instrumentation, or valve technology. Background in oil & gas, industrial maintenance, or manufacturing. Safety-conscious, reliable, and proactive approach to problem-solving. A results-driven mindset with a focus on quality, customer satisfaction, and continuous improvement. **As part of our commitment to maintaining a safe and professional work environment, the Crimson Group of Companies conducts comprehensive background checks and drug and alcohol testing on all prospective employees as part of the final offer process. These checks are intended to verify the accuracy of information provided by candidates and assess any potential risks to the company or its employees. All offers of employment are contingent upon the successful completion of these background checks.** Please note: We do not accept phone calls regarding job opportunities. To ensure fairness and consistency in our hiring process, all candidates must follow the application instructions outlined in the posting. Thank you for your understanding.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: The primary responsibility for the Equipment Technician position is collecting, analyzing, and reporting the health of rotating equipment based on multiple technologies including vibration, thermography, oil analysis, pump and motor performance, compressor and engine performance and key operating parameters. This position works closely with operations, engineers, specialists, and maintenance personnel in troubleshooting and repairs. This position will provide support for multiple sites. Essential duties and responsibilities: To perform this job successfully, an individual must be able to perform each essential job duties satisfactorily. The requirements for this position are listed below: * Develop and maintain vibration analysis program. Establish equipment routes and frequency. Collect and enter equipment data necessary for proper vibration analysis. * Proficient with rotating and/or reciprocating equipment analysis techniques and perform as required * Proficient with motor and/or engine analysis techniques and perform as required * Develop and maintain lube oil analysis program establishing routes and frequency * Periodic (monthly, quarterly, etc.) data acquisition from equipment, including vibration data with portable systems, critical machinery performance metrics (flow rates, equipment rotating speed, temperatures, and process flow characteristics) and lube oil samples and analysis * Perform analysis of data to resolve or proactively anticipate equipment failures * Lead and/or assist in root cause failure analysis utilizing the TapRoot process * Implements continuous monitoring systems, such as alarm, report, and acceptance regions * Coordinate scheduling of repairs by taking ownership of notifications and corresponding follow-up * Monitor equipment repairs in the field and at vendor shops * Report equipment deficiencies in SAP system making recommendations for corrective action * Collaborate with responsible Maintenance/Reliability Specialist, engineers, planners, Operations Managers and supervisors to ensure proper priorities are placed on deficiencies and continuous learning/improvement process is fostered * Support the lubrication program by monitoring its effectiveness or, when required, take samples, interpret analysis and take corrective actions Required education: * High School Diploma or GED * Required experience is commensurate with the selected job level: * Level C requires a minimum of 0-2 years of relevant experience in an oil and gas operations role or equivalent work experience * Level B requires a minimum of 2-4 years of relevant experience in an oil and gas operations role or equivalent work experience * Level A requires a minimum of 4+ years of relevant experience in an oil and gas operations role or equivalent work experience Preferred Qualifications: Solid troubleshooting skills and ability to interpret and analyze data Strong computer skills with experience in Microsoft Office suite. Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment * Frequent heavy lifting with and without assistance * Work on and around equipment and facilities that require knowledge of and adherence to safe work procedures and practices * Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays * Reliable attendance at work * Occasional overnight travel may be required DISCLAIMER: The above statements, which are subject to change, are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of personnel so classified.

TEAM UP WITH US! The Technical Communicator II is responsible for providing internal and external customers with technical assistance. DO YOU HAVE WHAT IT TAKES? WHAT YOU'LL DO: * Assist technicians on assignments through the repair process to ensure timely, cost effective and quality repairs are being completed. * Coordinate and work with Caterpillar engineers in resolving product issues. * Answer technical requests and inquiries to resolve product problems through diagnosis, personal knowledge and expertise, research, manufacturing contacts and engineering data. * Recognize, document and report product issues and assist in determining root cause that significantly affect customer satisfaction, productivity and/or operations. * Travels to customer sites within assigned region to assist in complex troubleshooting and ongoing issues to gain a better understanding of the specific repair and establish improvements in the repair process. * Attends necessary training in order to stay up to date on new products and challenges. * Utilizes Caterpillar system resources, such as SIS web, Product Support CRM (PSCRM), Dealer.Cat.com, Dealer Product Support Search (DPSS), Service Information Management System (SIMS I) /Continuous Product Improvement (CPI), to diagnose issues and evaluate possible solutions. * Proficient in using professional phone etiquette to field customer calls. WHAT YOU'LL NEED: * Associate's degree (A. A.) or equivalent from two-year college or technical school; or five (5) year related experience and/or training; or equivalent combination of education and experience. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Moderate computer skills. Familiar with web navigation, experience working with databases. * Must have valid drivers license and clean driving record. * Ability to write routine reports and correspondence. * Ability to speak effectively before groups of customers or employees of organization. * Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. * Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. WHY WORK WITH US? * We like to take care of business and have fun doing it! * We offer health, dental, vision, life, and more as a comprehensive benefits package. * Don't you want to work with awesome people? IMPORTANT INFORMATION: While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; outside weather conditions and vibration. The noise level in the work environment is usually moderate. Required travel up to 20%. This position is considered a safety sensitive position. The Job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA

The Apprentice Nondestructive Testing technician assists the Technician or Sr Technician performing inspections utilizing various NDT techniques seeking corrosion, defects, or detrimental conditions in accordance with specific written criteria. The Apprentice may calibrate instruments or perform other duties under the supervision of a certified Technician / Sr Technician. Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern * Performs all duties as assigned and adheres to TEAM's Core Values * Assists the Technician or Sr. Technician on NDT inspections * Studies to gain NDT certifications while assisting and learning hands on experience in various NDT methods * Other duties as assigned Job Qualifications * High school diploma or equivalent required * An understanding of basic math * Ability to work in Microsoft Word * Ability to work with computers / computerized equipment * Ability to read, understand, and communicate in English * Travel requirement; 0-75% * Ability to handle chemicals in a safe manner * Ability to follow instructions * May be required to travel out of town on a periodic basis Work Conditions * Position is based out of a branch or site location. * Field duties require indoor and outdoor work in a plant atmosphere * Interaction with other crew employees, as well as supervisors and client personnel * Working in plant and/or shop areas around production machinery with extreme noise levels * Must be able to wear safety equipment as required by the safety department for personal protection * May be at more than one job site in a day and must be able to tolerate climate changes Physical and Mental Requirements * Ability to lift and carry 75 pounds * Must be able to walk and climb except when performing non-field duties * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively * Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells * Ability to maintain focus and multitask effectively * Excellent communication skills

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Summary We are seeking a skilled HVAC Compressor Technician to support plant operations by maintaining, troubleshooting, and repairing HVAC systems, with a focus on compressor units and chillers. This role is critical to ensuring optimal climate control and equipment performance across production facilities. The technician will work closely with maintenance and production teams to uphold safety, efficiency, and uptime standards. Responsibilities Perform scheduled and unscheduled maintenance on HVAC systems, including compressors, chillers, air handlers, and pneumatic controls. Diagnose and repair mechanical, electrical, and refrigerant-related issues in HVAC and chiller systems. Monitor system performance and conduct inspections to identify potential failures or inefficiencies. Support installation and commissioning of new HVAC and chiller infrastructure and upgrades. Maintain accurate logs of maintenance activities, inspections, and repairs. Ensure compliance with OSHA and internal safety protocols. Collaborate with production and facilities teams to minimize downtime and support operational goals. Assist with emergency repairs and participate in on-call rotations as needed. Required Qualifications High school diploma or equivalent. Minimum 3 years of experience in HVAC maintenance, with a focus on compressor and chiller systems. Familiarity with refrigerant recovery, ductwork, and control systems. Ability to read and interpret technical manuals, schematics, and blueprints. EPA Section 608 Certification (Type II or Universal). Strong troubleshooting and problem-solving skills. Basic computer skills for maintenance logging and reporting. Preferred Qualifications Technical certification in HVAC or related field. Experience with Trane, Carrier, or similar commercial HVAC and chiller systems. Knowledge of building automation systems (BAS) and PLC interfaces. Familiarity with maintenance management software (e.g., Rippling, CMMS). Work Environment Work is performed in a production plant environment with exposure to varying temperatures and noise levels. May require climbing ladders, working at heights, and lifting heavy equipment. Use of PPE is mandatory in designated areas. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Four dynamic, integrated companies make up the Transwestern enterprise, giving us the perspective to think broadly, deeply and creatively about commercial real estate. Clients and investors rely on us for expertise that spans institutional and opportunistic investment, development, hospitality, and brokerage and asset services. Our award-winning, collaborative culture empowers team members with resources and independence to work across boundaries in pursuit of innovative solutions, reinforcing a reputation for service excellence that translates to measurable results. Through offices nationwide and alliance partners around the globe, we positively impact the built environment and our communities while fostering a work climate that champions career vitality for all. Learn more at transwestern.com and @Transwestern. Part of the Transwestern companies, Transwestern Real Estate Services (TRS) strives to add value for investors, owners, and occupiers across all commercial property types. Fueled by a holistic perspective of the real estate life cycle, agility and creativity are hallmarks of our approach, while vast national resources and sound market intelligence underpin customized recommendations and property solutions. Transwestern is built on a common purpose - Empowering Good People to do Extraordinary Things Together . We are committed to the hiring of smart, passionate, hard-working people who understand the benefits of both collaboration and independence. POSITION SUMMARY: The HVAC Technician is responsible for performing skilled mechanical duties in the inspection, preventive maintenance, repairs, installation and alteration of the property's heating, ventilation, air conditioning (HVAC) and related equipment. The HVAC Technician's contact with tenants, prospective tenants, owners, and vendors is to be guided by the highest professional standards including positive, supportive, friendly behavior and legendary service. This is a dynamic, on-site role that places you at the heart of the action. As a result, an essential function of this position is working on-site. Remote or hybrid options are not available. Being on property allows you to build strong relationships with clients and tenants, respond in real time, and make a visible impact every day. POSITION ESSENTIAL FUNCTIONS Inspect, repair, modify and install HVAC equipment including air conditioning compressors, receivers, condensers, chillers, cooling towers, pumps, automatic and hand valves, expansion valves and capillary tubes. Conduct regular preventive maintenance inspections on all equipment including, isolated heating and ventilating units, boilers, gas and electrically operated HVAC equipment, and make necessary adjustments, service and repairs Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, belts, compressors, heat exchangers, high limit controls, pressure controls, safety valves, and automated gas valves. Operate a variety of hand and power tools, welding, vacuum pump, test equipment utilized in the trade. Maintain equipment in effective and safe working condition. Maintain parts and tools inventory utilizing the properties computer maintenance management system (CMMS). Perform skilled electrical maintenance work in the repair, installation and alteration of HVAC equipment, components, timers, motors and wiring systems as needed; connect motors to control panels. Maintain regular attendance. Provide tools essential to performing troubleshooting, repairs, preventative maintenance on the HVAC and building equipment. Assist the Engineering team in the training of the theory and practical knowledge of basic HVAC applications. Perform skilled mechanical maintenance duties in the inspection, repairs, installation and alteration of heating, ventilation, air conditioning and related equipment and facilities. Operate specialized machinery, equipment and tools utilized in the repair, installation and maintenance of heating, ventilation, air conditioning. POSITION REQUIREMENTS High school diploma or general education degree (GED) and a minimum of two years of related experience and/or trade school training or equivalent combination of education and experience : Standard practices of the HVAC trade Theory and practical knowledge of HVAC systems and materials, methods and tools used in the operation and repairs of HVAC Understand applicable building codes, ordinances and regulations of State and local authorities pertaining to HVAC and boilers. Understand and follow current OSHA and ASHRAE guidelines. Knowledgeable with the operations of: Air compressors and pneumatic controls - DDC controls Manual and electrical tools and equipment applicable to the HVAC trade Welding and soldering techniques Healthy and safety regulations Basic record-keeping techniques Proper methods of storing equipment, materials and supplies Communicate effectively both orally and in writing. Work cooperatively with others. Work independently with little direction. Meet schedules and timelines. Maintain routine records and prepare reports. Work is performed while standing, sitting and/or walking. Requires the use of hands for simple grasping and fine manipulations. Requires bending, squatting, crawling, climbing, reaching. Requires the ability to lift, carry, push or pull medium weights, up to 75 pounds. Requires activities involving being around moving machinery, exposure to marked change in temperatures and humidity, and exposure to dust, fumes and gases. Applicants must be willing to travel to multiple locations as part of their duties and be “on-call” as needed. WORK SHIFT: First Shift (United States of America) LOCATION: Midland, TX This is a dynamic, on-site role that places you at the heart of the action. As a result, an essential function of this position is working on-site. Remote or hybrid options are not available. Being on property allows you to build strong relationships with clients and tenants, respond in real time, and make a visible impact every day. ABOUT US Transwestern's Guiding Principles are woven into the fabric of our firm and underscore the value of each individual team member. We embrace inclusion - not only as the right thing to do, but as a reflection of who we are. It is our responsibility and heartfelt desire to create an environment that elevates the human spirit and brings out the best in everyone. Different backgrounds, life experiences and cultures shape our individual perspectives and ultimately generate the best results for our clients. Strategic human capital planning combined with development initiatives foster a work environment that celebrates uniqueness and champions the achievements attained through collaboration. Please note that all candidates selected for an offer of employment are subject to pre-employment background checks, which may include but are not limited to, based on the role for which they have been selected: criminal history, education verification, social media review, motor vehicle records, credit history, and professional license verification. In addition, your employment with Transwestern is subject to successfully passing a drug screen check prior to your starting with the Company along with satisfactory references. We understand you have a choice when choosing where to work and pursue a career. We understand you are unique and have your story. We want to hear it. We encourage you to apply today so that you may become a part of the Transwestern story.