Service technician jobs in Minneapolis, MN

. Pay Rate: $30.00 an hour with $2.00 an hour additional shift differential on swing and grave shift ESSENTIAL DUTIES AND RESPONSIBILITIES Maintain, troubleshoot, and repair all HVAC systems Assist with HVAC system installations Perform routine preventive maintenance Maintain water treatment systems Troubleshoot and repair kitchen equipment and appliances Maintain accurate logs and maintenance records Monitor and adjust property wide temperature controls and set points KNOWLEDGE AND CERTIFICATION, SKILLS AND ABILITIES Knowledge and Certification Required: Two (2) years vocational HVAC training or five (5) years of equivalent on-the-job experience Valid HVAC and Refrigerant Certification Valid Driver's License and clean driving record Preferred: Class C Chief Boiler License Skills Required: Strong attention to detail and accuracy Highly organized with the ability to adapt to changing priorities Strong mechanical and electrical aptitude Preferred: Basic computer skills including Microsoft Office and familiarity with DX/DDC control systems Abilities Required: Ability to work efficiently and prioritize tasks in a fast-paced environment Ability to troubleshoot, maintain and repair specialized equipment Ability to maintain high confidentiality Ability to interact professionally with guests, and coworkers, and leadership Ability to follow established dress code policies and personal hygiene standards PHYSICAL DEMANDS Must be able to walk or stan for up to 8 hours Must have a good balance and be able to bend, kneel, and stoop as needed Must be able to occasionally push, pull, and grasp objects Must be able to climb a ladder Must have the ability to lift a minimum of 50 pounds independently on a routine basis Must be able to perform repetitive hand and wrist motions Must have good hand-eye coordination WORKING ENVIRONMENT Work is performed throughout the property both indoors and outdoors, and may include exposure to loud noise (power tools), dust, fumes (chemicals, paints, varnishes), flashing lights, and cigarette smoke Must be able to work in tight spaces and in all weather conditions Overtime may occasionally be required Must be willing to work a flexible schedule including nights, weekends, and holidays

Qualifications Proven field service experience with a highly technical product line and end users, preferably with laboratory, medical, or process analyzers. Ability to travel up to 50% of the time. Some international travel will be required. Ability to troubleshoot, test, repair and service precision measurement equipment Technical skills in installation, maintenance, and repair of scientific measurement instruments Ability to troubleshoot system issues and perform equipment calibration Strong written and verbal communication skills for customer interaction and technical documentation Ability to work independently and ensure customer satisfaction on-site Relevant technical certifications or an associate degree in a related field is required

The McLane team is the driving force behind our success. A diverse group of professionals, from Sales and IT to Dispatchers and Mechanics, work together seamlessly to keep our operations running smoothly. This position is an entry-level training and development position. with the wash bay, fuel Island and yard clean up and assist other mechanics when needed. Pay rate: $21.00-$23.00 per hour. ~ Generous benefits that start on your 60th day: medical, dental, and vision insurance, FSA/HSA and company-paid life insurance. ~ Earn vacation time, and sick leave accrual from day one and paid holidays after 90 days. ~Additional benefits: pet insurance, parental leave, employee assistance programs, discount programs, tuition reimbursement program, and more! What you'll do as an Mechanic I: Perform preventative maintenance service on tractor and trailers. Perform light repairs and minor electrical repairs. Drive or be trained to drive tractors and or tractor-trailer combinations. Check and diagnose electrical systems. Read preventative maintenance list and keep current on preventative maintenance due. Clean shop areas as needed. Maintain fleet tires. Be trained and certified to operate any required equipment within 30 days after hire. Comply with company attendance policy. Maintain a flexible work schedule to meet the changing needs of the job. Must be available for shop on-call rotation, and able to do road calls using a company vehicle. Qualifications you'll bring as a Mechanic I: Have High School Diploma or GED. Tech School classes or equivalent training preferred. Possess a Valid Class C Drivers License. Have 2 years experience in preventative maintenance, minor repairs on tractor and trailers, some electrical diagnostics, light repairs, dismounting and mounting tire machine, use of tire bars, and use of tire gun. This position requires the ability to read, write, and understand English at a level sufficient to perform job-related tasks effectively and safely. Building an expansive nationwide network of team members for 130+ years has allowed us to stay agile for our clients across the restaurant, retail, and e-commerce industries. We look to the future and are ready to continue making industry-defining moves by embracing the newest technology into our practices, continuing team member training, and emphasizing our people-centered culture. All applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

We are seeking a skilled and dedicated Maintenance Technician to join our team. The ideal candidate will possess strong mechanical knowledge and experience in facilities maintenance, ensuring that all equipment and systems are functioning efficiently. This role requires a proactive approach to problem-solving, excellent customer service skills, and the ability to work independently as well as part of a team. Duties Perform routine maintenance and repairs on various equipment and systems, including mechanical, electrical, and plumbing. Utilize tools such as an ohmmeter for troubleshooting electrical issues. Maintain accurate records of maintenance activities using Computerized Maintenance Management Systems (CMMS). Supervise and lead maintenance projects, ensuring tasks are completed on time and to standard. Collaborate with other departments to address facility-related concerns and improve overall operations. Respond promptly to maintenance requests from staff and ensure customer service excellence. Conduct inspections of facilities and equipment to identify potential issues before they become major problems. Assist in the training of new maintenance staff as needed. Requirements Proven experience in facilities maintenance or a related field. Strong mechanical knowledge with the ability to troubleshoot various systems. Familiarity with logic controllers is preferred. Excellent leadership skills with the ability to supervise effectively. Strong customer service orientation with good communication skills in English. Ability to work independently and manage multiple tasks simultaneously. A valid driver's license may be required for certain positions. If you are passionate about maintaining high standards in facility operations and have the skills we are looking for, we encourage you to apply for this exciting opportunity as a Maintenance Technician. All shifts are available.

Master Technology Group (MTG) specializes in designing, installing, and servicing low-voltage commercial property technologies across local and national markets. The Integrated Security Systems Technician (Traveling) provides customer-focused, workplace technology support to clients, field staff, installation partners, and internal team members. While most support work is performed remotely, occasional on-site assistance may be required locally and nationally. Supported systems are primarily security-related, including video surveillance, access control, intrusion detection, and EAS. Additional support may encompass network programming, fire alarm systems, data infrastructure, AV, and other low-voltage disciplines. An MTG Integrated Security Systems Technician must deliver exceptional customer service and cultivate strong professional relationships with clients, vendors, Local Service Partners (LSPs), and colleagues. This role requires technical proficiency, extensive knowledge of low-voltage systems, excellent organizational and multi-tasking skills, and strong verbal and written communication abilities. Candidates must reside in the Twin Cities area and are expected to perform most of their work from our Eden Prairie, MN office. Periodic job site responsibilities may be required locally and nationally, with travel up to 60% supporting client sites, installations, and service operations. To assist with critical service issues, the role includes on-call duties as part of daily responsibilities, requiring availability after hours on weekdays. Weekend on-call shifts will be rotated on a scheduled basis to ensure support during urgent weekend needs. This position reports to the Manager of Technical Services. KEY DUTIES AND RESPONSIBILITIES Support customers, coordinators, field technicians, and project managers with technical advice, troubleshooting, and resource allocation Collaborate with Business Development and Operations to provide pre-sales and post-sales support for MTG solutions and systems Deliver remote and hands-on training to field personnel to ensure compliance with all applicable codes, client specifications, and MTG's quality standards Serve as an escalation point for troubleshooting, programming, maintaining, and servicing client systems Pre-program, build, and stage equipment for installation when practical, to streamline on-site setup Provide remote and on-site programming and commissioning for client systems Conduct remote and on-site quality assurance audits to verify system performance and installation standards Assist installation, service, and coordination teams with technical planning, issue resolution, and commissioning, ensuring systems operate as intended and meet MTG quality standards Provide user training to client representatives Provide technical training to field personnel and colleagues Contribute to continuous improvement initiatives by providing feedback to management on processes, efficiency, and client satisfaction Deliver outstanding customer service and build strong, professional relationships with clients, vendors, partners, and colleagues Other duties to support the company vision and goals as requested QUALIFICATIONS Minimum of 5 years of field experience installing, configuring, programming, and servicing video, access control, and intrusion systems Field experience with low-voltage cabling, data infrastructure, fire alarms, EAS, DAS, AV, and other workplace technology systems is advantageous Proven ability to design, configure, and program a variety of security-related systems Demonstrated experience in delivering user training to client representatives and technical training to field personnel Industry certifications such as MN Power Limited Technician (PLT), NICET Video Security Systems Technician, ESA certifications, or equivalent are preferred Manufacturer certifications such as Axis Network Video, Milestone, Genetec, Exacq, Bosch, KeyScan, Avigilon, Lenel S2, March Networks, or Open Options are preferred Strong interest and motivation to pursue ongoing education and additional certifications Solid familiarity with the National Electrical Code (NEC) Ability to meet travel and on-call requirements for the position Excellent time management and organizational skills Strong problem-solving and decision-making capabilities Ability to multitask effectively in a fast-paced, multi-project environment Proficiency in Windows-based computer environments, including MS Office (Outlook, Excel, Word) and other standard software Excellent written and verbal communication skills PERFORMANCE MEASUREMENTS Demonstrates a clear understanding of the key duties and responsibilities of the position Shows enthusiasm and effort to perform all aspects of the role effectively Exhibits competence and capability to execute key duties and responsibilities efficiently Consistently meets expected standards of quality and customer satisfaction Completes assigned tasks promptly and adheres to project deadlines Represents MTG in a professional manner at all times, embodying the company's standards of conduct Demonstrates sound decision-making through practical analysis, effective problem-solving, and good judgment Maintains effective working relationships and collaborates well within a team environment Communicates clearly and professionally, both verbally and in writing, including emails, reports, and correspondence Demonstrates reliability through consistent attendance, punctuality, and timely completion of tasks Embodies MTG's Core Values: People First: Demonstrates humility, helpfulness, and genuine care for others Above and Beyond: Exhibits a “whatever it takes” mindset, actively contributing beyond minimum expectations Sense of Urgency: Responds promptly and diligently to organizational and client needs Team Player: Demonstrates respect, support, and collaboration, sharing expertise generously Do the Right Thing: Operates with honesty, integrity, transparency, and strong ethical standards COMPENSATION AND BENEFITS Base Salary $85,000 - $110,000+ DOQ Car Allowance Phone Stipend Medical, Dental & Vision Insurance 401k Match PTO Nice Healthcare Life Insurance - Company-provided STD / LTD - Company-provided Employee Referral Bonus Development Opportunities

We are seeking an experienced HVAC/Facilities Technician to support a mission-critical medical device research facility. This role ensures the proper functioning of building systems, including HVAC, boilers, generators, and Building Automation Systems (BAS), to maintain environmental conditions required for sensitive research activities. The position is a 6-month contract-to-hire opportunity. Responsibilities • Monitor and maintain HVAC systems, boilers, and generators to ensure optimal performance. • Operate and troubleshoot Building Automation Systems (BAS) including sensors, controllers, actuators, and user interfaces. • Perform preventative and corrective maintenance on critical infrastructure. • Respond to internal customer complaints and resolve facility-related issues promptly. • Coordinate with vendors for repairs beyond in-house capabilities. • Ensure compliance with safety protocols, including lockout/tagout procedures. • Maintain environmental conditions such as air pressure, humidity, and temperature within specified ranges. • Support research operations by ensuring facility readiness for animal and cadaver studies. Qualifications • Minimum of 4 years of technician experience in HVAC or facilities maintenance. • Valid 2nd Class Engineer Boiler License (C2) required; other boiler licenses (e.g., 2B or Chief) may be considered. • Proficiency in BAS systems and familiarity with protocols such as BACnet and Modbus. • Strong understanding of building operations, including chilled water systems and generator support. • Ability to work in a secure environment involving animal and cadaver testing. Preferred Skills • Certified Facility Engineer (CFE) certification. • Military experience in facilities or mechanical systems. • Excellent troubleshooting and problem-solving skills. • Strong customer service orientation.

Maintenance Technician First Shift Hours: Monday-Friday 7am-3pm Compensation: $28-$32 per hour About The Job: Lakeside HR Group has been engaged by our client to recruit for a Maintenance Technician to join their manufacturing team. Our client is a leading North American manufacturer of high-quality, durable industrial and storage products used across a variety of industries. They are known for their strong company culture, focus on safety, and dedication to innovation and continuous improvement. If you're a hands-on problem solver who enjoys keeping machines running smoothly and takes pride in maintaining a safe, efficient production environment, this could be a great opportunity for you. You'll join a team that values collaboration, reliability, and craftsmanship in everything they do. Key Responsibilities: Perform preventive maintenance on electrical, mechanical, and industrial equipment. Troubleshoot and repair production equipment such as control panels, compressors, ovens, bearings, drives, and HVAC units. Weld, cut, and grind metal for mold and machine repairs. Build and remodel equipment for manufacturing operations. Maintain accurate maintenance documentation and requisitions. Ensure a safe work environment by following company and OSHA safety guidelines. Support operational teams with technical assistance and problem-solving. Perform additional maintenance and repair tasks as assigned by management. Required Skills: 2+ years of industrial maintenance experience (education or equivalent training considered). Associate's degree in Electrical or Mechanical Maintenance preferred. Journeyman's card in Electrical or Mechanical trades a plus. Experience with rotational molding or plastics manufacturing a plus. Manufacturing experience strongly preferred. Forklift and scissor lift certification required. Strong troubleshooting, mechanical, and electrical aptitude. Ability to lift up to 50 lbs and work in hot, humid environments. Benefits: Competitive pay and comprehensive health benefits 401(k) with company match Paid time off and holidays Opportunities for advancement within a growing organization Supportive, team-oriented culture focused on safety and quality About Lakeside HR Group: At Lakeside HR Group, we understand that finding the right job is essential for your career success. We are a boutique-style human resources consulting and recruiting firm dedicated to providing personalized, tailored solutions. When you partner with us, you are not just getting a recruiter; you are getting the entire Lakeside team working together to support your career goals. Partner with us at Lakeside HR Group, where we are more than just a recruiting firm; we are your partners in achieving your career aspirations.

11:30am-8:00pm/Monday-Friday Staples is business to business. You're what binds us together. Our supply chain team is dedicated to meeting our customers' needs both now and in the future. By pairing innovative technology with dynamic employees, we create smarter, more efficient ways to meet our customers' needs faster. Our network of distribution, fulfillment, fleet, furniture installation and professional teams work together in fun and safe environments to deliver state-of-the-art products, services, and expertise to our customers. What you'll be doing: As a Maintenance Technician 2 you will perform preventative and spontaneous maintenance on conveyors, electrical motors, material handling equipment, skill saws, propane torch, man-lift, hand tools, power tools, welding equipment, grinders, electrical test equipment and ladders as well as lift equipment jacks, chargers, and batteries. In your role, you will perform general building maintenance including overhead doors, construction repair, roll carts, floor repair and second level gates, doors, etc... You will perform light plumbing maintenance and perform carpentry assignments as needed. Safety is our utmost priority so, in this role, we will look to you to ensure safe work practices and embrace our safety culture. In this role you will be essential to the success of Staples Supply Chain as we deliver to our customers. What you bring to the table: A mechanical aptitude, knowledge of hydraulics, electrical, pneumatics, and ability to learrn to read blueprints/schematics including electrical schematics Ability to use vendor manuals and procedures to perform preventative maintenance and troubleshooting tasks Ability to be trained and MHE certified to operate power material handling equipment, i.e. Forklift, Electric Pallet Jack, etc. An inclusive approach with your colleagues and customers to forge strong relationships and foster collaboration to resolve issues Ability to demonstrate analytical thinking and problem-solving Ability to adopt our safety procedures quickly and ensure safe work practices Ability to be comfortable working in a warehouse environment with seasonal temperature variations Basic English language skills (both verbal and written) Qualifications: What's needed- Basic Qualifications: A high school diploma or general education degree (GED) 1+ year of related experience Ability to pass a drug screen to the extent legally permissible As a Full-Time associate, you must have the ability to work additional hours beyond scheduled shift; additional overtime hours will be required based on business need Ability to work at heights up to 60 feet or more as needed An ability to lift, push or pull boxes/merchandise weighing between 70 pounds and 100 pounds by hand Must be at least 18 years of age What's needed- Preferred Qualifications: Trade school background We Offer: · · Competitive Pay: $25.12 - $34.54/hour + $1.00 Shift Differential · Inclusive culture with associate-led Business Resource Groups · Flexible PTO (22 days) and Holiday Schedule (7 observed paid holidays) · Online and Retail Discounts, Company Match 401(k), Physical and Mental Health Wellness programs, and more perks and benefits The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. At Staples, “inclusion” is an action word. It represents what we do to ensure that all employees feel valued and supported to contribute to their fullest potential. When we operate inclusively, diversity naturally follows. This is why we work hard to foster an inclusive culture, as we seek employees with unique and varied perspectives and areas of expertise. The result is a better workplace and innovative thinking that helps us exceed our customers' expectations - through the power of the people behind our iconic brand. Staples is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or any other basis protected by federal, state, or local law.

Full-time Description The Company Miner Ltd, an OnPoint Company, is an industry-leading service and equipment solutions provider with branch-based operations across the country. OnPoint Group is a fast-paced and ever-changing company and has been awarded the Best Managed Companies Award by Deloitte and WSJ for three years running, as well as having been named to the Inc. 5000 Fastest Growing Companies list for eight consecutive years! We believe in challenging the status quo and finding a better way for our customers, which is how we have grown into the company we are today. Miner drives down the cost of warehousing and materials management operations saving our customers revenue and time by understanding their business, finding efficiencies in their operation, providing faster systems repairs and delivering expertly executed scheduled maintenance. For more than 20 years, Miner has consistently delivered professional emergency maintenance service, equipment analysis and proactive preventative maintenance solutions to companies throughout North America. Miner solutions leave their customers more time to focus on their core business - not on the business of maintenance and materials management. Job Summary Our Dock & Door Technicians a.k.a. “Service Professionals” are the core of our preventative and emergency response services for our customers. You may call them a “technician”, but the role is more than using tools to fix broken items. Service Professionals are on the road, troubleshooting complex issues in places like commercial buildings, aircraft hangers, schools, fire/police departments, and much more. A Service Professional might spend an hour fixing a broken door for a hospital garage and an hour later they could be heading to a large warehouse to fix loading dock equipment. This role has unique access to see the inner workings of some of the largest operations in North America, and that's just before lunchtime. Our people make us great and for us, that starts with finding the right person to fill our open positions. Anyone interested in this role should be able to answer yes to these questions: 1. Do I enjoy variety and complexity? 2. Does the idea of autonomy and independence excite me? 3. Can I have fun, while keeping it safe and efficient? 4. Am I looking for a career family and not just a job? 5. Would my friends and family describe me as a “tinkerer”? If you answered yes to those questions, we invite you to keep reading and hit that apply button! Room for Growth The exciting news about being a Service Professional is that you can start where your current skills best align with the level of work. Miner offers four levels of Service Professionals so that you can gain, advance, or refine your dock and door abilities. Apprentice Level (Level I) - best for candidates who have a passion for learning and a willingness to train. Experience working in any related field is a plus, but most importantly an understanding of mechanics and the ability to fix a variety of products is needed. Service Professional Level (Level II) - this is the sweet spot for anyone who has at least a year of experience in a related field and knowledge of the basic concepts of electrical and hydraulic troubleshooting. Service professionals are well attuned to customers and can communicate effectively while in the field. Senior Level (Level III) - possesses experience in basic repairs in the AED, Highspeed, or gate fields with a proficient understanding of hydraulic and electrical troubleshooting. Candidates will typically have 4 years of experience in this field. Expert Level (Level IV) - are the masters of their craft, skilled in electrical and hydraulic troubleshooting with a mechanical mindset, leadership skills and extensive knowledge in dock leveler and door repairs. Candidates will possess at least 8 years of experience. We encourage you to apply no matter your experience level. If you know where your skills would be best suited feel free to call them out on your resume or application (help us in our review, so we can help you). If you aren't sure what level would best suit your experience, apply, and let Miner guide you! What You'll Do Service Professionals are responsible for hands-on customer care. They troubleshoot, service, inspect, install, and repair industrial equipment of all shapes and sizes. There is paperwork involved (what job doesn't have it), as a Service Professional there is expectation that work orders be maintained on paper and digitally. The role operates a vehicle regularly to visit different customer sites and plays a major part in maintaining safety and OSHA compliance for the Company. Requirements What We Look For Qualified candidates answered “Yes” to all of our questions AND will have in their toolbox, the following skills: 2-4 years of relevant experience…we care more about how you execute, the quality of your work product, and if you can make an impact to Miner customers. Ability to repair industrial facilities, including doors, loading docks, and dock-leveler's. Ability or a desire to learn welding, steel fabrication, and electrical. If you have Hydraulic and Pneumatics experience, awesome, call it out on your submission so we know where to find you! Ability to take direction and work independently while on the road for hours each day. Strong communication, problem solving, and analytical skills. The ability to think through complex situations critically is a must. Technical school training and OEM certifications are desired but not required. Ability to work a flexible schedule, with nights, weekends, and Holidays. Overtime opportunities are available, so a willingness to work is what we need. A clean driving record and a valid Driver's License for the state of employment is required. What's In It For You We thought you'd never ask. Take a peak at our benefits page to learn more about the Benefits offered to all Miner employees. In addition to those benefits, Service Professionals can look forward to: Competitive pay, including incentives Uniform and boot allowance Training and the opportunity for growth Company issued truck for work travel Autonomy and independence Competitive PTO and Paid Holidays Full benefits package starting day one - includes medical, dental, vision, 401k, and much more If you've read through and believe you would make an impact as a Service Professional at Miner, we invite you to apply now and look forward to welcoming you as a guest of our career family! Miner Ltd. considers applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, genetic information, marital or veteran status, or any other legally protected status. Disclaimer This job posting may also appear on other job boards. Be aware that job postings on external job boards may not be authorized by OnPoint Group and may contain inaccurate or incomplete information. While we encourage you to explore these opportunities, please be aware that we do not endorse or control the content on these external sites. We are not responsible for the accuracy, completeness, or reliability of information posted on other job sites, and we are not liable for any damages or losses that may arise from your use of that information. You are solely responsible for verifying the accuracy and completeness of any information you obtain from external sources. Applicants should refer to OnPoint Group's Careers Page for the most accurate job posting and reach out to the Company with any questions about a job posting. Salary Range The pay range noted represents the company's good faith minimum and maximum range for this role at the time of posting. The actual compensation offered to a candidate will be dependent upon several factors, including but not limited to experience, qualifications, and geographic location. Employees may be eligible for additional incentive pay. #MLTD Salary Description $18.00-$35.00 per hour

Description of the role: Superior Ford is seeking a Senior Master Technician to join their team in Plymouth, MN. The ideal candidate will have extensive knowledge and experience in automotive maintenance and repair. Responsibilities: Diagnose and repair vehicle issues Perform routine maintenance on a variety of vehicles Keep accurate records of work performed Requirements: At least 5 years of experience as an automotive technician Certification from a recognized automotive training program Strong attention to detail and problem-solving skills Benefits: Competitive compensation ranging from $85,000.00 to $150,000.00 per year, paid weekly Health, dental, and vision insurance Paid time off and holidays About the Company: Superior Ford is a leading automotive dealership in Plymouth, MN, providing exceptional service to customers for over two decades. Our team of dedicated professionals is committed to delivering top-notch automotive solutions to our clients. Description of the Role: As a Senior Master Technician at Superior Ford in Plymouth, MN, you will play a crucial role in ensuring the efficiency and quality of our automotive services. You will be responsible for diagnosing, repairing, and maintaining vehicles with a high level of expertise and precision. Responsibilities: Performing complex vehicle diagnostics and repairs Providing guidance and training to junior technicians Ensuring all work meets high-quality standards Adhering to safety procedures and regulations Requirements: Minimum of 5 years of experience as a Master Technician Certification in Automotive Service Excellence (ASE) Strong problem-solving skills and attention to detail Excellent communication and teamwork abilities Benefits: Competitive compensation ranging from $85,000.00 - $150,000.00 per year Weekly pay schedule Opportunities for career growth and advancement Healthcare and retirement benefits About the Company: Superior Ford is a leading automotive dealership in Plymouth, MN, committed to providing exceptional customer service and high-quality vehicles. We value our employees and strive to create a positive and inclusive work environment. We are seeking a Senior Master Technician who is Ford-certified to join our team! This individual will be responsible for performing a variety of mechanical services on vehicles, diagnosing and repairing complex mechanical issues, and providing exceptional customer service to our clients. The ideal candidate will have a strong background in the automotive industry and a passion for delivering top-quality workmanship. By working at a Ford dealership, you can be a part of a brand that honors the past, and is invested in the future. Join the Ford Family where we value service to each other and the world as much as to our customers! Benefits: Health, Medical and Dental 401K Plan Paid time off and vacation Growth opportunities Employee vehicle purchase plans Family owned and operated Long term job security Flexible Work Schedule Responsibilities: Perform a wide range of mechanical services on various vehicles in a timely and efficient manner. Diagnose and repair complex mechanical issues using diagnostic tools and equipment. Provide accurate and detailed reports of repairs and services performed. Ensure all work is completed to the highest standards and follows manufacturer specifications. Continually maintain and update technical knowledge and skills through training and certifications. Communicate effectively with customers to explain repairs and services and address any concerns or questions. Collaborate with the service team to maintain a clean and organized work area. Adhere to all safety protocols and regulations. Requirements: High school diploma or equivalent. Ford Certification ASE Certification Previous experience at a Ford dealership Minimum of 5 years of experience as an Automotive Technician, with a Master Technician certification preferred. Thorough knowledge of automotive systems, mechanics, and components. Strong diagnostic and problem-solving skills. Proficient with diagnostic tools and equipment. Excellent communication and customer service skills. Ability to work efficiently and independently in a fast-paced environment. Valid driver's license and clean driving record. Ability to lift up to 50 pounds and stand for extended periods of time. We are an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

rms Company provides contract manufacturing of high-quality, tight-tolerance medical implants, components and sub-assemblies using cutting-edge technology. rms is part of the Cretex Medical family of companies. Learn more at ******************** and ********************** 2nd Ops Technician Position Summary The 2nd Ops Technician I is responsible for ensuring quality parts are completed per the operation specifications listed on the print, process sheets, or work order. This position will perform standard and repetitive sequences of operations and setups on blasting, buffing, polishing, laser marking, laser welding, and deburring equipment. Other processes include light assembly and packaging components and product in preparation for shipping. 1st Shift: Monday - Friday 6:00 am - 2:30pm Responsibilities 2nd Ops Technician Duties and Responsibilities * Set up and operate equipment for laser marking, laser welding, blasting, buffing, polishing, assembly, and deburring * Maintain average machine set-ups and targeted rates per hour efficiencies * Perform preventative maintenance to ensure consistent machine performance * Finish products in accordance with customer, regulatory, and company requirements * Work on components that require adjusting, fitting, and aligning to close tolerances * Use basic inspection equipment such as a micrometer, caliper, Micro Vu, Optical Comparator plug gages and thread gages to inspect parts * Read and understand basic blueprints * Inspect products per the In-process Inspection (IP) * Read and understand routers, DPM's, MPS procedures and work order travelers * Assemble and package diversified medical components, sub-assemblies, or products to customer requirements to procedure, instructions and prints * Determine packaging by looking at the bill of materials (BOM) * Adhere to clean-room requirements * Perform a variety of duties such as molding, washing, label printing, labeling, deburring, tray and pouch packaging and sealing and boxing for sterilization. * Deburr parts to print using deburring knives, hand grinding tool, dremel, or other deburring tools * Identify and remove burrs from all types of thread holes and plate assemblies * Read and understand job layouts * Use a microscope and hand tools * Operate laser marking and welding equipment Qualifications 2nd Ops Technician Qualifications * Ability to run a variety of secondary operations equipment * Ability to use a microscope and hand tools * Ability to perform a variety of work duties * Microsoft Office proficiency (Outlook, Word, Excel, PowerPoint, Publisher) * Clear and effective verbal and written communication skills * Attention to detail * Organizational skills * Ability to work in a fast-paced team environment * Ability to prioritize and multitask Desirable Criteria & Qualifications * 1 year of experience in a manufacturing environment * Medical manufacturing experience * Experience working in a highly regulated industry (FDA, ISO) rms Company Benefits As a Cretex Medical company, rms offers a full benefit package to its employees. Benefits include medical, dental, vision and life insurance options. rms also offers a 401(k) retirement plan with employer match, profit sharing, short- term and long-term disability insurance, paid time off, holiday pay, and an onsite medical clinic. rms Company also offers company specific benefits, such as: * Onsite Clinic * Paid Parental Leave * Monthly Social Events * Annual Employee Appreciation Week * Volunteer Opportunities * Training and Development Opportunities * Tuition Reimbursement * Wellness Program Cretex Companies use cutting oils, solvents, and other chemicals in the manufacturing process. Testing is conducted on a periodic basis to ensure that all chemicals are kept well below the OSHA permissible exposure levels. Pay Range USD $20.00 - USD $24.00 /Hr. Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

Benefits: Bonus based on performance Competitive salary Flexible schedule Free uniforms Opportunity for advancement Signing bonus Training & development ***$200 sign-on bonus after 90-day probationary period. *** We provide: Year-round stable, steady work Regular work hours Flexible scheduling Company van and cover related expenses such as gas, oil changes, etc. *varies by location TruBlue t-shirts, polos, and other company gear Strong office support TruBlue of Edina is a Home Ally Service company dedicated to providing premium handyman services with bonded and insured technicians, giving our customers peace of mind. Our mission is to help people maintain the safety and value of their homes by offering handyman services, home assessments, and regular maintenance We are searching for a reliable home technician (handyman/handywoman) to provide general home services to our customers in our community. If you have 5 or more years of paid experience in general carpentry and handyman work, we want to hear from you. We are looking for a seasoned handyman/handywoman with the following experience: Bathroom upgrades / remodel Drywall repair / patching/ caulking Flooring repair and installation General carpentry General home repairs and handyman work Kitchen repair / remodel Minor plumbing and electrical Painting interior and exterior What we value: FAMILY - Why else are we in this business? It is our most important asset, and we strive to make everyone feel like they are part of our family! INTEGRITY - Treating people with respect and looking for the same in return, everyone has a voice! TRUST - Achieved through reliability and credibility, cannot just talk it, ya gotta walk it too! QUALITY - Taking pride in one's work and providing the best value and customer experience possible, they will not always remember the work that was done, but they will remember you! The appropriate candidate for the Home Technician/Handyman position will be proficient in miscellaneous around-the-house type repairs like carpentry, basic plumbing, drywall, painting, and basic electrical. Candidates do not need to be licensed tradesmen, but those candidates are welcome to apply. Qualified candidates will need a driver's license, a reliable vehicle, and standard tools. Candidate must also speak fluent English and be a legal citizen of the US. We are actively interviewing for this position - If you have the skills we're looking for, apply today, and our hiring manager will follow up! Compensation: $35.00 - $45.00 per hour TruBlue Home Service Ally ️ provides a unique and affordable approach to helping busy adults and seniors live a worry-free life by offering trustworthy handyman, home maintenance and senior modification services. Helping you maintain your home both inside and out, TruBlue's services include: handyman projects and to-do list chores, preventative home maintenance programs, seasonal work, and senior modification services, all handled by a professional and insured Tru-Pro ️ Technician. Thank you for considering a position with TruBlue. All locations are independently owned and operated. Service offerings, certifications, and licenses vary by location. T.B. Franchising Systems, Inc. is not affiliated, connected or associated with TruPros International, Inc. or any of its services. All inquiries specific to employment at this location should be made directly to the franchise location, and not to TruBlue Home Service Ally Corporate office.

Job Description The Generator Service Technician - Level III has a critical role in all activities related to the Generator Service Department. In this role, you will act as an in-field technical expert under the direct supervision of the Regional Service Manager. This service team member provides leadership and support to all HM Cragg Service Technicians in the region and is a consistent advocate for the technicians' daily operations, training, and mentoring. Reporting Relationship: The Generator Service Technician - Level III reports to the Regional Service Manager Responsibilities: Generator Service: Perform repairs and preventive maintenance on power generation systems Conduct onsite troubleshooting and diagnostics of intricate mechanical and electrical systems Maintain knowledge of evolving technologies in the industry Progress through the Generac technician certification program, complete continuing education requirements and participate in other training as required Perform other duties as assigned Customer Service: Provide comprehensive assessments of customers' needs and recommend appropriate repairs while ensuring exceptional customer care and satisfaction Cultivate and sustain positive relationships with customers Technical Support: Provide real-time technical support to field technicians via calls, emails, and on-site visits. Engage in advanced troubleshooting and repair procedures. Safety Champion: Promote a culture of safety to office and field staff while driving the compliance of safety policies and procedures. Ensure that safety protocols are always strictly adhered to. Stay up to date on company-sponsored safety training, compliance, and knowledge of HAZ MAT and DOT requirements. Process Improvement: Stay up to date with industry trends and advancements Recommend changes to company policies and procedures as necessary Support process improvement initiatives and development of new procedures to streamline workflows, customer satisfaction and quality assurance Requirements: Skills/Knowledge: High level of electrical and mechanical aptitude revolving around power generation systems Extensive working knowledge of electrical systems ranging from 5 VDC to 480 VAC Broad range of expertise in prime movers ranging in size from 990CC to 65L engines Ability to work with a range of tools, from wrenches to multimeters Possess advanced troubleshooting skills and be able to effectively operate basic shop equipment Ability to fluently read and interpret wiring diagrams and schematics Must be computer proficient, specifically with Microsoft 360 and various OEM proprietary controller software packages Personal Attributes: Interpersonal - Maintains confidentiality, keeps emotions under control, approaches others tactfully, and works with honesty, integrity, and ethics Teamwork - Balances team and individual goals, exhibits objectivity and openness to others' ideas and viewpoints, gives and welcomes feedback Communication - Demonstrated proficiency in verbal, written and listening skills; ability to complete maintenance reports and business correspondence, effectively present information and respond to questions from groups of managers, clients, applicants, etc Client Service - Conducts self professionally, skillfully, and efficiently manage client needs, responds promptly to others at all times, and treats others with respect Leadership - Continually develops skills and encourages growth, strong ability to work Independently, inspires and motivates others to perform successfully, and has a willingness to bring new ideas to the table Effective and polished interaction with customers to gather information quickly; explain customer responsibilities in resolving issues; communicate next steps and status; and inspire confidence High attention to detail, able to problem solve logically and think critically Adherence to company policies and procedures, meet company goals and objectives Dependable and able to work independently Ability to work flexible hours, days, travel, and stay overnight Must be able to work overtime and after hours, as needed Willing to work in a rotating on-call schedule Possesses strong work ethic and takes ownership of both company and client goals/objectives Focused on understanding, meeting, and exceeding customer expectations Ensure mutual success of the company and its employees through strong collaboration and teamwork Qualifications: High school diploma or equivalent 3 plus years of power generation experience is required 2 plus years of technical troubleshooting experience required Generac Master Certified Technician or the ability to acquire it EGSA Journeyman Certification or the ability to acquire it Must have and be able to maintain a current driver's license and acceptable driving record per HM Cragg insurance carrier standard Must maintain compliance with DOT random drug and alcohol screening requirements Must be able to lift 100 pounds and able to bend and twist several times a day Must be able to work with arms extended above head for extended periods of time Travel and hours expectations: Up to 50% based on HMC projects and time of year Work hours as required to serve all internal and external stakeholders effectively At HM Cragg, we invest in your growth with training, tuition assistance, and development opportunities, including the potential for advancement within the company. As a Generator Technician, you will receive a uniform allowance, monthly cell phone reimbursement, and a company vehicle which can be used for reasonable personal use. As an employee-owner, you'll receive shares of stock in our company each year that you meet eligibility requirements. You'll enjoy additional benefits such as PTO and paid holidays, company-paid Life and Disability insurance, 401k match, and contributions to Medical, Dental, and Vision Insurance.

Employment Type: Full-Time Shift: 1st Shift - Monday through Friday About the Role We are seeking a skilled Repair Services Technician to join our team at Polar Semiconductor. In this role, you will manage and maintain repairable assets, performing in-house service, testing, and calibration to ensure equipment reliability. Your work will directly support production by diagnosing failures, conducting repairs, and analyzing product failure trends to improve long-term serviceability. Key Responsibilities Identify the root cause of equipment malfunctions using diagnostic tools and technical expertise. Perform necessary repairs, including part replacement, system recalibration, and rebuilds. Conduct preventive maintenance to optimize equipment performance. Maintain accurate service records of all repairable assets, including repairs, maintenance activities, and parts usage. Prepare reports to analyze product failure trends and serviceability issues. Create and update documentation for services performed. Collaborate with fab technicians to gather details helpful for diagnostics and repair. Qualifications Required: Associate's degree in Automation, Electronics, HVAC, or comparable field. 4+ years of experience in electrical and mechanical maintenance. Strong knowledge and prior use of computerized maintenance management systems (CMMS). Understanding of instrumentation, controls, electrical systems, safety systems, and wiring diagrams. Familiarity with pneumatic systems and schematics. Ability to adapt, organize, and prioritize work in a fast-paced environment. Strong attention to detail and ability to follow specifications. Ability to obtain Hazmat certification. Preferred: Previous experience as a maintenance technician. Experience working with pumps, chillers, or rebuilds. About Us At Polar Semiconductor, we're on a mission to fulfill our future as the U.S.-based manufacturing partner of choice for differentiated power and sensor technologies. With a $525M investment from the CHIPs Act, the state of Minnesota, and private equity, we are looking for the best in the industry to help Polar transform from a captive fab to a pure-play foundry. We are doubling our manufacturing capacity and investing in advanced BCD and Wide Bandgap technology such as GaN. Polar has a long history in manufacturing automotive grade semiconductors and we are expanding in strategic markets such as national defense and AI data centers. We pride ourselves on state-of-the-art semiconductor manufacturing, a collaborative culture, and a commitment to helping our customers succeed. What We Offer Salary: $27.00 - $33.00 per hour (good-faith estimate), plus shift differentials where applicable. Benefits & Other Eligible Compensation: Includes health, dental, vision, disability and life insurance, 401(k) plan with company match, paid time off, annual bonus, and tuition reimbursement. Polar Semiconductor is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. We are committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions are based on business needs, job requirements, and individual qualifications, without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, veteran status, or any other status protected by the laws or regulations in the locations where we operate. About Minneapolis/St. Paul Area Our offices and manufacturing facility are located in Bloomington, Minnesota, a suburb of Minneapolis. Living in the Minneapolis / Saint Paul area offers a strong sense of community, a vibrant arts and music scene, and abundant outdoor activities year-round. The city boasts a lower cost of living than many major metros, excellent parks and lakes, and a well-educated workforce with diverse job opportunities. Its distinct seasons bring variety, from colorful autumns to lively summers filled with festivals and waterfront activities.

Job DescriptionMasterTech is on the search for experienced Field Service Mechanics in the St. Paul, MN area. The successful Heavy Equipment Mechanics will be responsible for the maintenance, diagnostics, and repair of a diverse line of heavy equipment (construction, earth moving, mining, aerial, cranes, etc.) across the field service region. Mechanics will be dispatched from their home to various client locations. Service vehicle privileges are included. Compensation: $35.00 - $50.00/hour, plus overtime after 8 hours/day. Comprehensive benefits plan, including medical, dental, vision, life, short/long-term disability, etc. 401K with matching contributions. 2 weeks prorated vacation, plus sick days, holidays, and PTO. Service truck, gas card, company cell phone, laptop, etc. Shift: Day shift, Monday to Friday. 8 to 12 hour days on average. Key Qualifications: 4+ years of experience as a Heavy Equipment Mechanic. Excellent understanding of mechanical, electrical, and hydraulic systems. Proficient using scanners, OEM diagnostic software, and reading schematics. Experience working as a Field Mechanic is preferred. Able to work independently, and able to communicate professionally with company clients/customers. Valid driver's license, clean driving record. CDL preferred, though not required.

About Us: At Liberty Tire Recycling, we're building a sustainable future - one tire at a time. As North America's leading tire recycler, we offer a unique opportunity to make a real impact on the environment. Join our team of nearly 4,000 dedicated employees across 70+ sites and help us transform billions of pounds of waste tires into valuable resources. We're committed to innovation, a circular economy, and providing a rewarding workplace where you can grow and thrive. Job Summary: Liberty Tire Recycling is looking for a Millwright Fabricator/Industrial Equipment Maintenance Technician. As the Millwright Fabricator/Industrial Equipment Maintenance Technician, you would be responsible for preventative maintenance, fabrication, welding, diagnosis, and repairs to the company recycling production equipment and/or other equipment as deem necessary. Your expertise will ensure the efficiency and safety of our operations, contributing to our commitment to high standards and effective recycling processes at our Savage, MN. facility. We are looking for individuals who can work a varying schedule. Duties and Responsibilities: Processing/Operations: Responsible for the alignment, adjustment, maintenance and repair of processing equipment, facilities, and heavy equipment. Troubleshoot, repair, and maintain tire grinders, compressors, various styles of conveyors and other electro-mechanical systems. Apply knowledge of machinery and tools, including welding equipment, digital volt meters and other similar industrial equipment. Preventive Maintenance Program: Maintain perpetual maintenance program for all facility and plant equipment; perform predictive maintenance functions including testing, inspection, and lubrication of moving equipment. Understand and follow a work order maintenance system. Support the installation of new equipment including wiring, platforms, shredders, and other process/safety equipment. Skills and Abilities: High school diploma or equivalent. Understand and follow all OSHA and site-specific safety programs. 3 - 5 years of experience working with heavy equipment, production and processing equipment. Ability to work in a busy and changing environment both inside and outside in all seasons. Must be able to lift 50 pounds and periodically lift 80 pounds. Welding certification is preferred. Education and Experience: Prior experience in the tire recycling or manufacturing industry is a plus. Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance EEO Statement: Liberty Tire Recycling is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sex, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.

Imperial Dade, a leading North American distributor, has a Service Repair Technician role available in Minneapolis, MN! Join a strong and continuously evolving group, helping to continue to grow our business. If you're eager for your next opportunity, Imperial Dade is a great place to take that next step. The Service Repair Technician maintains and services housekeeping equipment purchased or leased by our customers. Your hours will be from Monday - Friday from 8:00 am to 4:30 pm, with some overtime. Imperial Dade is the leading independently owned and operated distributor of foodservice packaging and janitorial supplies in North America. As a provider of customized supply chain solutions, we serve customers in many business-to-business market segments including restaurants, grocery stores, healthcare, sports and entertainment, and cruise lines. Founded in 1935 and headquartered in New Jersey, Imperial Dade serves as a mission-critical partner to more than 120,000 customers through our footprint of 130+ branches. **All correspondence will come directly from Imperial Dade and not a personal email address.** Responsibilities You will: Service, maintain, and repair commercial housekeeping equipment, such as carpet extractors, floor scrubbers, and vacuums Establish and maintain strong collaborative relationships with assigned accounts and provide excellent customer service Maintain up-to-date records of services performed Purchase parts and supplies and track inventory Properly demonstrate equipment to customers Coordinate with other departments to ensure customer satisfaction Continually enhance industry and equipment knowledge Follow safety and housekeeping procedures Qualifications You have: High School Diploma, GED, or equivalent experience A valid driver's license and a clean MVR Prior service repair and maintenance experience Electrical and mechanical experience Experience with commercial housekeeping equipment Excellent communication skills We offer a dynamic environment for our more than 7,500 employees to work, learn, and grow professionally. We value our people and strive to create rewarding career opportunities by offering competitive salaries and benefits (medical, dental, vision), a 401(k) program with company match, life insurance, a generous paid time off package, educational reimbursement, paid family leave, and adoption assistance. We are excited to invite talented individuals with a passion for excellence to join our team. Imperial Dade is an EEO Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history, or genetic information, political affiliation, military service, or other non-merit-based factors. Our company is a Fair Chance employer, committed to providing opportunities for qualified individuals with past justice system involvement. We believe in assessing candidates based on their skills and experience. A conditional offer of employment will be contingent upon the successful completion of a background check, consistent with applicable federal, state, and local laws.

at General Parts Group Now Hiring: Commercial Kitchen Technician Up to $3,000 Sign-On Bonus for Experienced Candidates! Are you a skilled and motivated technician looking for a stable career with a top-notch company? Join our team at General Parts, where you'll play a crucial role as a Commercial Kitchen Service Technician. We encourage those who have a background in commercial kitchen appliance repair, HVAC, refrigeration, electrical or commercial building maintenance to apply. An EPA or CFESA Certification is a plus! Pay: Varying from $20-40 hourly based on level of experience • Sign on bonus UP TO 3K for those who qualify. • Company vehicle provided and dispatched from your own home. • Continued education and room for advancement within. • Great Benefits, PTO, matching 401K and so much more! Responsibilities: · Utilize troubleshooting skills to install, repair, and maintain commercial cooking, refrigeration, and HVAC equipment. · Collaborate with customers to provide effective service solutions for their equipment, including gas, electric, and steam systems. · Order and install replacement parts in customer equipment, coordinating with the parts department. · Participate in after-hours and weekend on-call duties. Why Work for Us? · Fully Equipped: Service vehicle, gas card, tablet, cellphone, and company-supplied uniforms with paid laundry services. · Tools Provided: Major tools provided, with a generous annual tool allowance. · Training Opportunities: Comprehensive initial and ongoing training, including CFESA Certification, with chances for advancement. · Competitive Benefits: Paid Time Off, On-Call Pay, Paid Holidays, 401(k) with Company Match, Medical, Dental, Vision, Company-Paid Life Insurance, Profit Sharing, Company-Paid Long-Term Disability Insurance, Overtime pay on Saturdays, Double-Time pay on Sundays and holidays. Qualifications: Completion of a satisfactory background check and drug screen is required. Must be at least 18 years of age. Valid Driver's license and driving record that aligns with our safety standards. Two years of relevant experience, education, or military experience preferred. Strong mechanical aptitude, including electronics, steam, gas, and refrigeration. Refrigeration technicians must be EPA certified. CFESA Certification is a plus but not required. Must be highly safety-conscious. Moderate to heavy lifting and carrying (up to 75 pounds). Requires frequent walking, standing, driving, sitting, squatting, kneeling, reaching overhead, bending, twisting, and turning. Must be able to use hands for fine manipulation of hand tools. General Parts Group is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees Ready to Elevate Your Career? Apply Now! General Parts- Empowering Field Service Technicians to Excel! #HiringNow #FieldService #ServiceTechnician #Electrical #ApplianceRepair #CookingEquipment #Refrigeration #HVAC #JoinOurTeam

Master Level Electric Vehicle Technician For over 70 years, we have built our brand on strong family values and a philosophy of serving our guests, team members, and communities with the understanding that every team member is critical to our success. If you are looking for a great career with great people, apply today! $35-$70/hour (Incentive-Based) Responsibilities * Diagnose, maintain, and repair vehicle systems including engine, transmission, steering, suspension, brakes, etc. * Utilize diagnostic tools, special service equipment and standard test drives to monitor vehicle components and systems * Perform work efficiently to dealership specifications * Maintain continuous communication with Service Advisors of needed services to ensure excellent customer communication * Ensure warranty repairs meet all manufacturer specifications Qualifications * Valid Driver's License with clean motor vehicle record * Excellent time management skills and attention to detail while working under tight timelines * Willingness to follow direction while working independently * Ability to walk and stand for long periods of time in all weather conditions * Ability to drive both automatic and standard transmission vehicles * ASE certifications are ideal What We Offer * Medical, Dental & Vision * Short Term & Long Term Disability * HSA/Flexible Spending * 401k with Match * Paid Vacation * Growth Opportunities * Paid Training Offers of employment are contingent upon successfully passing a criminal background check and review of motor vehicle records.