Service technician jobs in Minnetonka, MN - 3,708 jobs

Securitas Technology Corporations is a division of Securitas AB, the largest protective services provider in the world with over 370,000+ Securitas Heroes across the world. STC offers a full portfolio of video, access, intrusion, fire and integrated systems and services. As a leading systems integrator and alarm monitoring company, we deliver the SES Difference, serving countless long-term clients with solutions and services that protect their people, customers, and assets. STC is seeking technically minded individuals possessing experience with low voltage electronics specializing in electronic security solutions. Our teams are responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Respond to trouble tickets to ensure application uptime and system performance Work individually and as a team to diagnose and resolve application issues Execute preventative maintenance tasks to maximize application availability and identify system faults Perform routine configuration changes (user permissions, application configuration, etc.) Document all system modifications through a digital change control tracking system Produce quality technical documentation describing the conceptual and quantitative facets of system deployment, intended for both a technical and non-technical audience Perform pre-deployment end to end testing of all upgrades and major modifications Perform on site installations of software upgrades and major modifications Minimum Requirements High School diploma required or equivalent Familiarity installing and troubleshooting low voltage equipment Strong working knowledge of commercial access control, CCTV, burglary alarm, intrusion systems, and fire alarms Strong working knowledge of Microsoft Office Strong written and verbal communications skills Working knowledge of network communications and IP addressing Excellent problem solving and analytical skills Excellent time management skills Positive attitude and strong work ethic Certifications in enterprise grade CCTV and Access Control systems a plus STC offers comprehensive benefits including: Highly competitive salary Company training and industry leading certification program Company Vehicle Company Cell Phone Medical, Dental, Vision, and Life Insurance Company Paid Short Term and Long-Term Disability 401K with 60% Match up to 6% of salary Paid vacation, holiday and sick time Educational Assistance Exceptional growth opportunities Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

DSI - Dicks Sanitation, a Waste Connections company, is looking for a safety conscience Diesel Mechanic to join our GROWING team in Lakeville, Minnesota.Pay-$22-30/hour DOE 2nd Shift Opportunity - Includes $2.00/hr. Shift Differential M-Th 2:30PM - 10:30PM, Friday 10:00AM - 6:00PM ***$7,000 STAY ON BONUS INCLUDED*** Why you need to join us! CULTURE: It's a Great place to work! We work in an environment where empowered, self-directed All-stars know what they do is important. INTEGRITY: Our definition is “saying what you will do and then doing it!” We keep our promises to our customers and our employees. DUTIES AND RESPONSIBILITIES: Perform repairs and assigned preventative maintenance services. Performs inspections, diagnosis, and repair of electrical, hydraulics, suspension brake and air systems on vehicles and equipment. Utilize vehicle computer electrical systems to interpret failure modes to initiate or assign repairs. Complete required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times. Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports. Conducts safety checks on vehicles and equipment. Performs service calls for emergency breakdowns. Maintain a clean, safe work environment in compliance with corporate and OSHA standards. WORKING CONDITIONS AND PHYSICAL EFFORT: Extensive physical activity. Requires strenuous physical work; heavy lifting, pushing, or pulling required of objects over 60 pounds. Work environment may be indoors in a shop, or outdoors to repair trucks on the road. Usually well-lighted and ventilated. Sometimes necessary to work in awkward or tight positions and to handle greasy or dirty tools. These factors require following basic safety precautions.. The employee is exposed to outside weather, including frequent wet and/or humid conditions, as well as exposure to fumes and vibration. Noise level is usually moderate. MINIMUM JOB REQUIREMENTS: Valid drivers license (CDL preferred, but not required). Ability to read, write, comprehend and communicate in English. 1 year of experience preferred. Must own personal tools. To be considered for any of our current openings you must complete an application at ************************ . Application information and additional instructions can be found once you select your position of interest. We offer excellent benefits including: medical, dental, vision, flexible spending account, long term & short term disability, life insurance, 401K retirement and unlimited opportunities to "Connect with Your Future". Waste Connections is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability or protected veteran status. #ACBoost

US-MN-Eagan Type: Full-Time # of Openings: 1 MN - Eagan (Minneapolis) About the Role Spotting a solution and fixing a problem is a tremendous technical skillset. It requires diligence, determination, and a knack for knowledge. Does this sound like you? If so, Canon USA, an innovator of technology, solutions, and services, wants to meet you. We're ready to bring aboard individuals who strive for excellence in operational, maintenance, and networking support to help our valued customers with basic technical expertise of Canon-supported products. Your Impact We're actively seeking an individual to: Diagnose basic mechanical, software, network, and system failures using established procedures. Service and repair designated equipment to Canon standards and specifications. Maintain working knowledge and aptitude of multiple product groups. This includes basic aspects of troubleshooting and diagnostics. Meet and exceed customer demands by providing efficient, responsive, and accurate Field/Shop/on-site maintenance. Properly maintain all technical information, Field Service Reports, Expense Reports, and Canon property assigned. Maintain all technical information and Canon property assigned and provide direction to less experienced technicians. Provide the solutions of escalated technical and/or customer service-related problem areas for any territory requested. About You: The Skills & Expertise You Bring Please note: this is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19. We're looking for a dedicated individual with: HS Diploma, GED, or equivalent experience required, plus 1 to 2 years of related experience. A basic understanding of internet environments and the ability to complete the 120-day introductory period and the PDIF (Printing and Digital Imaging Foundations) new-hire class. The ability to travel (valid driver's license and acceptable driving record necessary). The capability to work in a 24/7 environment, while performing shift work and on-call rotations. Required to take all necessary steps to obtain security and/or other clearances required by customers to enter the customers' premises. Must be able to lift 50 pounds and be active more than 50 percent of the time (walking, standing, stooping/kneeling). In accordance with applicable law, we are providing the anticipated hourly rate for this role: $21.50 to 30.75 hourly. This role is eligible for a transportation allowance. Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at ***************** and connect with us on LinkedIn at ****************************************** Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at https://*****************/about-us/life-at-canon/benefits-and-compensation We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site https://*****************/about-us/life-at-canon, we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at https://*****************/about-us/life-at-canon. #CUSA Posting Tags #LI-KG1 #PM19 #ID22 PI21b262c80abb-37***********8

Master Technology Group (MTG) specializes in designing, installing, and servicing low-voltage commercial property technologies across local and national markets. The Integrated Security Systems Technician (Traveling) provides customer-focused, workplace technology support to clients, field staff, installation partners, and internal team members. While most support work is performed remotely, occasional on-site assistance may be required locally and nationally. Supported systems are primarily security-related, including video surveillance, access control, intrusion detection, and EAS. Additional support may encompass network programming, fire alarm systems, data infrastructure, AV, and other low-voltage disciplines. An MTG Integrated Security Systems Technician must deliver exceptional customer service and cultivate strong professional relationships with clients, vendors, Local Service Partners (LSPs), and colleagues. This role requires technical proficiency, extensive knowledge of low-voltage systems, excellent organizational and multi-tasking skills, and strong verbal and written communication abilities. Candidates must reside in the Twin Cities area and are expected to perform most of their work from our Eden Prairie, MN office. Periodic job site responsibilities may be required locally and nationally, with travel up to 60% supporting client sites, installations, and service operations. To assist with critical service issues, the role includes on-call duties as part of daily responsibilities, requiring availability after hours on weekdays. Weekend on-call shifts will be rotated on a scheduled basis to ensure support during urgent weekend needs. This position reports to the Manager of Technical Services. KEY DUTIES AND RESPONSIBILITIES Support customers, coordinators, field technicians, and project managers with technical advice, troubleshooting, and resource allocation Collaborate with Business Development and Operations to provide pre-sales and post-sales support for MTG solutions and systems Deliver remote and hands-on training to field personnel to ensure compliance with all applicable codes, client specifications, and MTG's quality standards Serve as an escalation point for troubleshooting, programming, maintaining, and servicing client systems Pre-program, build, and stage equipment for installation when practical, to streamline on-site setup Provide remote and on-site programming and commissioning for client systems Conduct remote and on-site quality assurance audits to verify system performance and installation standards Assist installation, service, and coordination teams with technical planning, issue resolution, and commissioning, ensuring systems operate as intended and meet MTG quality standards Provide user training to client representatives Provide technical training to field personnel and colleagues Contribute to continuous improvement initiatives by providing feedback to management on processes, efficiency, and client satisfaction Deliver outstanding customer service and build strong, professional relationships with clients, vendors, partners, and colleagues Other duties to support the company vision and goals as requested QUALIFICATIONS Minimum of 5 years of field experience installing, configuring, programming, and servicing video, access control, and intrusion systems Field experience with low-voltage cabling, data infrastructure, fire alarms, EAS, DAS, AV, and other workplace technology systems is advantageous Proven ability to design, configure, and program a variety of security-related systems Demonstrated experience in delivering user training to client representatives and technical training to field personnel Industry certifications such as MN Power Limited Technician (PLT), NICET Video Security Systems Technician, ESA certifications, or equivalent are preferred Manufacturer certifications such as Axis Network Video, Milestone, Genetec, Exacq, Bosch, KeyScan, Avigilon, Lenel S2, March Networks, or Open Options are preferred Strong interest and motivation to pursue ongoing education and additional certifications Solid familiarity with the National Electrical Code (NEC) Ability to meet travel and on-call requirements for the position Excellent time management and organizational skills Strong problem-solving and decision-making capabilities Ability to multitask effectively in a fast-paced, multi-project environment Proficiency in Windows-based computer environments, including MS Office (Outlook, Excel, Word) and other standard software Excellent written and verbal communication skills PERFORMANCE MEASUREMENTS Demonstrates a clear understanding of the key duties and responsibilities of the position Shows enthusiasm and effort to perform all aspects of the role effectively Exhibits competence and capability to execute key duties and responsibilities efficiently Consistently meets expected standards of quality and customer satisfaction Completes assigned tasks promptly and adheres to project deadlines Represents MTG in a professional manner at all times, embodying the company's standards of conduct Demonstrates sound decision-making through practical analysis, effective problem-solving, and good judgment Maintains effective working relationships and collaborates well within a team environment Communicates clearly and professionally, both verbally and in writing, including emails, reports, and correspondence Demonstrates reliability through consistent attendance, punctuality, and timely completion of tasks Embodies MTG's Core Values: People First: Demonstrates humility, helpfulness, and genuine care for others Above and Beyond: Exhibits a “whatever it takes” mindset, actively contributing beyond minimum expectations Sense of Urgency: Responds promptly and diligently to organizational and client needs Team Player: Demonstrates respect, support, and collaboration, sharing expertise generously Do the Right Thing: Operates with honesty, integrity, transparency, and strong ethical standards COMPENSATION AND BENEFITS Base Salary $85,000 - $110,000+ DOQ Car Allowance Phone Stipend Medical, Dental & Vision Insurance 401k Match PTO Nice Healthcare Life Insurance - Company-provided STD / LTD - Company-provided Employee Referral Bonus Development Opportunities

Akkodis is seeking a Customer Service Technician for a Contract position with a client located in Bloomington, MN. Ideally looking for applicants to have a solid background in manufacturing and dispatching. Pay Range: $22-25/hr. The rate may be negotiated based on experience, education, geographic locations and other factors. Job Overview: We are seeking experienced Customer Service Technician familiar with overseeing dispatching Tasks. This job is fit for you if you come in with experience into customer support and dispatching technicians. If you are interested in this Customer Service Technician job in Bloomington, MN, then please click APPLY NOW. For other opportunities available at Akkodis go to ****************** you have questions about the position, please contact Vaneesh Prashar at ************. Equal Opportunity Employer/Veterans/Disabled Benefit offerings include medical, dental, vision, term life insurance, short-term disability insurance, additional voluntary benefits, commuter benefits and 401K plan. Our program provides employees the flexibility to choose the type of coverage that meets their individual needs. Available paid leave may include Paid Sick Leave, where required by law; any other paid leave required by Federal, State or local law; and Holiday pay upon meeting eligibility criteria. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ************************************************ The Company will consider qualified applicants with arrest and conviction records.

Now Hiring: Skilled Mechanics - Twin Cities, MN Are you an experienced mechanical technician looking for a stable, rewarding career with exceptional pay and benefits? Join a team that values craftsmanship, teamwork, and professional growth while helping maintain the mechanical systems that keep a world-class institution running smoothly. Position: Mechanic (HVAC & Building Systems) Location: Twin Cities, MN (Minneapolis-St. Paul) Shifts: 1st and 2nd shift openings | Mostly Mon-Fri (standard 8-hour or four 10-hour shifts) Compensation: Mechanic 2: $32.65-$37.41/hr (3+ years' experience) Mechanic 3: $37.30-$41.31/hr (5+ years' experience) ➡ With outstanding benefits, these roles offer total compensation exceeding $70K+ annually! What You'll Do: Perform advanced mechanical and HVAC maintenance on building systems and equipment Troubleshoot, repair, and replace pumps, chillers, air handlers, valves, and related components Maintain water systems, cooling towers, and low-pressure steam systems Support daily facility operations to ensure comfort, efficiency, and reliability Why You'll Love This Opportunity: Excellent work-life balance with paid holidays, vacation, and sick time Pension plan and top-tier healthcare starting Day 1 Reduced tuition (up to 100%) for employees and dependents Optional Union membership offering added benefits and stability Supportive, veteran-friendly environment with strong career growth potential If you're a motivated mechanic or military veteran with mechanical systems experience, this is an incredible opportunity to build a long-term career while making an impact every day. 👉 Apply today and join a team where your skills truly make a difference!

Come join our Walser family! Our company has been a pioneer in the automotive industry with over 65 years of service. We believe in Family, Career and Diversity. We show that through progressive, family-focused benefits and perks, compelling career paths, and a commitment to diversity, inclusion, and belonging. Compensation: Guarantee rate of 29.90/hr up to $39.25/hr with Production incentives! How does our Journeyperson Technician Drive Impact? Our Journeyperson Technicians come in every day and work hands on at our dealership and are the pros of the industry. You will become familiar with all of Walser's vehicle line-up, the inner workings of our dealership, and will be an integral part of our service team. Perform diagnosis on customer and dealership vehicles. Use OEM and aftermarket scan tools to diagnose various no start, vehicle performance issues, squeaks, rattles, and suspension concerns. Communicate what parts department and needed parts for repair. Keep abreast of latest repair techniques and concerns for your OEM store. Complete all approved repairs from start to finish. Utilization of video multi-point inspections Assure quality control with all vehicles through safe practices of wearing safety glasses and hard-toes shoes and slip resistant footwear. We're Looking For: Ability and enthusiasm to work in a fast-paced, active environment. Reliable, team player mentality High standard for quality and attention to detail Self-starter with capability to manage your day. Valid Driver's License Must be 18 years of age. Automotive degree and/or OEM certification preferred. What We Offer: Walser's Tech Life Program is focused on growing techs with a dedicated career path, paid training, team structure, and tuition reimbursement. Hear from our owner, Andrew Walser talks about tech life at Walser- $150 annual boot allowance Walser will purchase safety glasses for Detailers, Service, and Parts Employees Medical, Dental, Vision coverage & HSA/FSA Paid Parental Leave (Maternity, Paternity, Adoption) Adoption Assistance Program Life Insurance and 401K with Employer Match Pet insurance and Employee discounts Access to our Employee Resource Groups, such as: Women of Walser, Drive with Pride, Asian Hmong Alliance, and Veterans at Walser. The opportunity to volunteer through the Walser Foundation -The Walser Foundation: Our Community Mission - YouTube We proudly operate on a set of Core Values which drive our decisions and actions on a daily basis. They are: Do The Right Thing - Nothing is worth compromising a relationship. Lead By Example - Be willing to help no matter how difficult the challenge. Display Positive Energy - A good attitude is highly contagious. Be Open Minded - The only thing that is constant is change. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. Walser Automotive Group is an EOE/Veterans/Disabled/LGBTQ+ employer.

We are seeking an experienced HVAC/Facilities Technician to support a mission-critical medical device research facility. This role ensures the proper functioning of building systems, including HVAC, boilers, generators, and Building Automation Systems (BAS), to maintain environmental conditions required for sensitive research activities. The position is a 6-month contract-to-hire opportunity. Responsibilities • Monitor and maintain HVAC systems, boilers, and generators to ensure optimal performance. • Operate and troubleshoot Building Automation Systems (BAS) including sensors, controllers, actuators, and user interfaces. • Perform preventative and corrective maintenance on critical infrastructure. • Respond to internal customer complaints and resolve facility-related issues promptly. • Coordinate with vendors for repairs beyond in-house capabilities. • Ensure compliance with safety protocols, including lockout/tagout procedures. • Maintain environmental conditions such as air pressure, humidity, and temperature within specified ranges. • Support research operations by ensuring facility readiness for animal and cadaver studies. Qualifications • Minimum of 4 years of technician experience in HVAC or facilities maintenance. • Valid 2nd Class Engineer Boiler License (C2) required; other boiler licenses (e.g., 2B or Chief) may be considered. • Proficiency in BAS systems and familiarity with protocols such as BACnet and Modbus. • Strong understanding of building operations, including chilled water systems and generator support. Preferred Skills • Certified Facility Engineer (CFE) certification. • Military experience in facilities or mechanical systems. • Excellent troubleshooting and problem-solving skills. • Strong customer service orientation.

Full-time Description The Company Miner Ltd, an OnPoint Company, is an industry-leading service and equipment solutions provider with branch-based operations across the country. OnPoint Group is a fast-paced and ever-changing company and has been awarded the Best Managed Companies Award by Deloitte and WSJ for three years running, as well as having been named to the Inc. 5000 Fastest Growing Companies list for eight consecutive years! We believe in challenging the status quo and finding a better way for our customers, which is how we have grown into the company we are today. Miner drives down the cost of warehousing and materials management operations saving our customers revenue and time by understanding their business, finding efficiencies in their operation, providing faster systems repairs and delivering expertly executed scheduled maintenance. For more than 20 years, Miner has consistently delivered professional emergency maintenance service, equipment analysis and proactive preventative maintenance solutions to companies throughout North America. Miner solutions leave their customers more time to focus on their core business - not on the business of maintenance and materials management. Job Summary Our Dock & Door Technicians a.k.a. “Service Professionals” are the core of our preventative and emergency response services for our customers. You may call them a “technician”, but the role is more than using tools to fix broken items. Service Professionals are on the road, troubleshooting complex issues in places like commercial buildings, aircraft hangers, schools, fire/police departments, and much more. A Service Professional might spend an hour fixing a broken door for a hospital garage and an hour later they could be heading to a large warehouse to fix loading dock equipment. This role has unique access to see the inner workings of some of the largest operations in North America, and that's just before lunchtime. Our people make us great and for us, that starts with finding the right person to fill our open positions. Anyone interested in this role should be able to answer yes to these questions: 1. Do I enjoy variety and complexity? 2. Does the idea of autonomy and independence excite me? 3. Can I have fun, while keeping it safe and efficient? 4. Am I looking for a career family and not just a job? 5. Would my friends and family describe me as a “tinkerer”? If you answered yes to those questions, we invite you to keep reading and hit that apply button! Room for Growth The exciting news about being a Service Professional is that you can start where your current skills best align with the level of work. Miner offers four levels of Service Professionals so that you can gain, advance, or refine your dock and door abilities. Apprentice Level (Level I) - best for candidates who have a passion for learning and a willingness to train. Experience working in any related field is a plus, but most importantly an understanding of mechanics and the ability to fix a variety of products is needed. Service Professional Level (Level II) - this is the sweet spot for anyone who has at least a year of experience in a related field and knowledge of the basic concepts of electrical and hydraulic troubleshooting. Service professionals are well attuned to customers and can communicate effectively while in the field. Senior Level (Level III) - possesses experience in basic repairs in the AED, Highspeed, or gate fields with a proficient understanding of hydraulic and electrical troubleshooting. Candidates will typically have 4 years of experience in this field. Expert Level (Level IV) - are the masters of their craft, skilled in electrical and hydraulic troubleshooting with a mechanical mindset, leadership skills and extensive knowledge in dock leveler and door repairs. Candidates will possess at least 8 years of experience. We encourage you to apply no matter your experience level. If you know where your skills would be best suited feel free to call them out on your resume or application (help us in our review, so we can help you). If you aren't sure what level would best suit your experience, apply, and let Miner guide you! What You'll Do Service Professionals are responsible for hands-on customer care. They troubleshoot, service, inspect, install, and repair industrial equipment of all shapes and sizes. There is paperwork involved (what job doesn't have it), as a Service Professional there is expectation that work orders be maintained on paper and digitally. The role operates a vehicle regularly to visit different customer sites and plays a major part in maintaining safety and OSHA compliance for the Company. Requirements What We Look For Qualified candidates answered “Yes” to all of our questions AND will have in their toolbox, the following skills: 2-4 years of relevant experience…we care more about how you execute, the quality of your work product, and if you can make an impact to Miner customers. Ability to repair industrial facilities, including doors, loading docks, and dock-leveler's. Ability or a desire to learn welding, steel fabrication, and electrical. If you have Hydraulic and Pneumatics experience, awesome, call it out on your submission so we know where to find you! Ability to take direction and work independently while on the road for hours each day. Strong communication, problem solving, and analytical skills. The ability to think through complex situations critically is a must. Technical school training and OEM certifications are desired but not required. Ability to work a flexible schedule, with nights, weekends, and Holidays. Overtime opportunities are available, so a willingness to work is what we need. A clean driving record and a valid Driver's License for the state of employment is required. What's In It For You We thought you'd never ask. Take a peak at our benefits page to learn more about the Benefits offered to all Miner employees. In addition to those benefits, Service Professionals can look forward to: Competitive pay, including incentives Uniform and boot allowance Training and the opportunity for growth Company issued truck for work travel Autonomy and independence Competitive PTO and Paid Holidays Full benefits package starting day one - includes medical, dental, vision, 401k, and much more If you've read through and believe you would make an impact as a Service Professional at Miner, we invite you to apply now and look forward to welcoming you as a guest of our career family! Miner Ltd. considers applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, genetic information, marital or veteran status, or any other legally protected status. Disclaimer This job posting may also appear on other job boards. Be aware that job postings on external job boards may not be authorized by OnPoint Group and may contain inaccurate or incomplete information. While we encourage you to explore these opportunities, please be aware that we do not endorse or control the content on these external sites. We are not responsible for the accuracy, completeness, or reliability of information posted on other job sites, and we are not liable for any damages or losses that may arise from your use of that information. You are solely responsible for verifying the accuracy and completeness of any information you obtain from external sources. Applicants should refer to OnPoint Group's Careers Page for the most accurate job posting and reach out to the Company with any questions about a job posting. Salary Range The pay range noted represents the company's good faith minimum and maximum range for this role at the time of posting. The actual compensation offered to a candidate will be dependent upon several factors, including but not limited to experience, qualifications, and geographic location. Employees may be eligible for additional incentive pay. #MLTD Salary Description $21.00-$35.00 per hour

Hi, Greetings Hope you are doing great! I would like to update you on an urgent open position with our esteemed client. Please go through the Job Description. Send me your updated resume and expected rate for the below position Role: Technology Lead - Java/Webservices (Interview on 19th August) Duration: Full Time Location: Minneapolis, MN Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education • At least 4+years of experience with Information Technology Preferred • At least 4 years of experience in Core JAVA, J2EE, Spring skills. • At least 4 years of experience in web programming using HTML5, JavaScript, and CSS in application development, maintenance and testing. • Knowledge of languages like Perl Scripting , JQuery, ASP, AJAX , FLASH etc. would be an added advantage • At least 3 year of Web 2.0 tools for development and testing • Knowledge of integration with databases like MySQL, Oracle, DB2. • Knowledge on development and source control tools such as Maven and GIT. • At least 4 years of experience in software development life cycle. Prior work experience in Agile methodology desirable. • Strong Analytical skills • At least 4 years of experience in translating functional/non-functional requirements to system requirements and technical designs. • Excellent written & verbal communication • Experience working with offshore/onshore resources • Ability to work in team environment and client interfacing skills. • Experience and desire to work in a Global delivery environment • Domain knowledge of Brokerage/Banking/Financial Services Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education Additional Information All your information will be kept confidential according to EEO guidelines.

Replies within 24 hours Benefits: Bonus based on performance Competitive salary Flexible schedule Free uniforms Opportunity for advancement Signing bonus Training & development ***$200 sign-on bonus after 90-day probationary period. *** We provide: Year-round stable, steady work Regular work hours Flexible scheduling Company van and cover related expenses such as gas, oil changes, etc. *varies by location TruBlue t-shirts, polos, and other company gear Strong office support TruBlue of Edina is a Home Ally Service company dedicated to providing premium handyman services with bonded and insured technicians, giving our customers peace of mind. Our mission is to help people maintain the safety and value of their homes by offering handyman services, home assessments, and regular maintenance We are searching for a reliable home technician (handyman/handywoman) to provide general home services to our customers in our community. If you have 5 or more years of paid experience in general carpentry and handyman work, we want to hear from you. We are looking for a seasoned handyman/handywoman with the following experience: Bathroom upgrades / remodel Drywall repair / patching/ caulking Flooring repair and installation General carpentry General home repairs and handyman work Kitchen repair / remodel Minor plumbing and electrical Painting interior and exterior What we value: FAMILY - Why else are we in this business? It is our most important asset, and we strive to make everyone feel like they are part of our family! INTEGRITY - Treating people with respect and looking for the same in return, everyone has a voice! TRUST - Achieved through reliability and credibility, cannot just talk it, ya gotta walk it too! QUALITY - Taking pride in one's work and providing the best value and customer experience possible, they will not always remember the work that was done, but they will remember you! The appropriate candidate for the Home Technician/Handyman position will be proficient in miscellaneous around-the-house type repairs like carpentry, basic plumbing, drywall, painting, and basic electrical. Candidates do not need to be licensed tradesmen, but those candidates are welcome to apply. Qualified candidates will need a driver's license, a reliable vehicle, and standard tools. Candidate must also speak fluent English and be a legal citizen of the US. We are actively interviewing for this position - If you have the skills we're looking for, apply today, and our hiring manager will follow up! Compensation: $35.00 - $45.00 per hour TruBlue Home Service Ally ️ provides a unique and affordable approach to helping busy adults and seniors live a worry-free life by offering trustworthy handyman, home maintenance and senior modification services. Helping you maintain your home both inside and out, TruBlue's services include: handyman projects and to-do list chores, preventative home maintenance programs, seasonal work, and senior modification services, all handled by a professional and insured Tru-Pro ️ Technician. Thank you for considering a position with TruBlue. All locations are independently owned and operated. Service offerings, certifications, and licenses vary by location. T.B. Franchising Systems, Inc. is not affiliated, connected or associated with TruPros International, Inc. or any of its services. All inquiries specific to employment at this location should be made directly to the franchise location, and not to TruBlue Home Service Ally Corporate office.

Description of the role: Superior Ford is seeking a Senior Master Technician to join their team in Plymouth, MN. The ideal candidate will have extensive knowledge and experience in automotive maintenance and repair. Responsibilities: Diagnose and repair vehicle issues Perform routine maintenance on a variety of vehicles Keep accurate records of work performed Requirements: At least 5 years of experience as an automotive technician Certification from a recognized automotive training program Strong attention to detail and problem-solving skills Benefits: Competitive compensation ranging from $85,000.00 to $150,000.00 per year, paid weekly Health, dental, and vision insurance Paid time off and holidays About the Company: Superior Ford is a leading automotive dealership in Plymouth, MN, providing exceptional service to customers for over two decades. Our team of dedicated professionals is committed to delivering top-notch automotive solutions to our clients. Description of the Role: As a Senior Master Technician at Superior Ford in Plymouth, MN, you will play a crucial role in ensuring the efficiency and quality of our automotive services. You will be responsible for diagnosing, repairing, and maintaining vehicles with a high level of expertise and precision. Responsibilities: Performing complex vehicle diagnostics and repairs Providing guidance and training to junior technicians Ensuring all work meets high-quality standards Adhering to safety procedures and regulations Requirements: Minimum of 5 years of experience as a Master Technician Certification in Automotive Service Excellence (ASE) Strong problem-solving skills and attention to detail Excellent communication and teamwork abilities Benefits: Competitive compensation ranging from $85,000.00 - $150,000.00 per year Weekly pay schedule Opportunities for career growth and advancement Healthcare and retirement benefits About the Company: Superior Ford is a leading automotive dealership in Plymouth, MN, committed to providing exceptional customer service and high-quality vehicles. We value our employees and strive to create a positive and inclusive work environment. We are seeking a Senior Master Technician who is Ford-certified to join our team! This individual will be responsible for performing a variety of mechanical services on vehicles, diagnosing and repairing complex mechanical issues, and providing exceptional customer service to our clients. The ideal candidate will have a strong background in the automotive industry and a passion for delivering top-quality workmanship. By working at a Ford dealership, you can be a part of a brand that honors the past, and is invested in the future. Join the Ford Family where we value service to each other and the world as much as to our customers! Benefits: Health, Medical and Dental 401K Plan Paid time off and vacation Growth opportunities Employee vehicle purchase plans Family owned and operated Long term job security Flexible Work Schedule Responsibilities: Perform a wide range of mechanical services on various vehicles in a timely and efficient manner. Diagnose and repair complex mechanical issues using diagnostic tools and equipment. Provide accurate and detailed reports of repairs and services performed. Ensure all work is completed to the highest standards and follows manufacturer specifications. Continually maintain and update technical knowledge and skills through training and certifications. Communicate effectively with customers to explain repairs and services and address any concerns or questions. Collaborate with the service team to maintain a clean and organized work area. Adhere to all safety protocols and regulations. Requirements: High school diploma or equivalent. Ford Certification ASE Certification Previous experience at a Ford dealership Minimum of 5 years of experience as an Automotive Technician, with a Master Technician certification preferred. Thorough knowledge of automotive systems, mechanics, and components. Strong diagnostic and problem-solving skills. Proficient with diagnostic tools and equipment. Excellent communication and customer service skills. Ability to work efficiently and independently in a fast-paced environment. Valid driver's license and clean driving record. Ability to lift up to 50 pounds and stand for extended periods of time. We are an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

rms Company provides contract manufacturing of high-quality, tight-tolerance medical implants, components and sub-assemblies using cutting-edge technology. rms is part of the Cretex Medical family of companies. Learn more at ******************** and ********************** 2nd Ops Technician Position Summary The 2nd Ops Technician I is responsible for ensuring quality parts are completed per the operation specifications listed on the print, process sheets, or work order. This position will perform standard and repetitive sequences of operations and setups on blasting, buffing, polishing, laser marking, laser welding, and deburring equipment. Other processes include light assembly and packaging components and product in preparation for shipping. 1st Shift: Monday - Friday 6:00 am - 2:30pm Responsibilities 2nd Ops Technician Duties and Responsibilities * Set up and operate equipment for laser marking, laser welding, blasting, buffing, polishing, assembly, and deburring * Maintain average machine set-ups and targeted rates per hour efficiencies * Perform preventative maintenance to ensure consistent machine performance * Finish products in accordance with customer, regulatory, and company requirements * Work on components that require adjusting, fitting, and aligning to close tolerances * Use basic inspection equipment such as a micrometer, caliper, Micro Vu, Optical Comparator plug gages and thread gages to inspect parts * Read and understand basic blueprints * Inspect products per the In-process Inspection (IP) * Read and understand routers, DPM's, MPS procedures and work order travelers * Assemble and package diversified medical components, sub-assemblies, or products to customer requirements to procedure, instructions and prints * Determine packaging by looking at the bill of materials (BOM) * Adhere to clean-room requirements * Perform a variety of duties such as molding, washing, label printing, labeling, deburring, tray and pouch packaging and sealing and boxing for sterilization. * Deburr parts to print using deburring knives, hand grinding tool, dremel, or other deburring tools * Identify and remove burrs from all types of thread holes and plate assemblies * Read and understand job layouts * Use a microscope and hand tools * Operate laser marking and welding equipment Qualifications 2nd Ops Technician Qualifications * Ability to run a variety of secondary operations equipment * Ability to use a microscope and hand tools * Ability to perform a variety of work duties * Microsoft Office proficiency (Outlook, Word, Excel, PowerPoint, Publisher) * Clear and effective verbal and written communication skills * Attention to detail * Organizational skills * Ability to work in a fast-paced team environment * Ability to prioritize and multitask Desirable Criteria & Qualifications * 1 year of experience in a manufacturing environment * Medical manufacturing experience * Experience working in a highly regulated industry (FDA, ISO) rms Company Benefits As a Cretex Medical company, rms offers a full benefit package to its employees. Benefits include medical, dental, vision and life insurance options. rms also offers a 401(k) retirement plan with employer match, profit sharing, short- term and long-term disability insurance, paid time off, holiday pay, and an onsite medical clinic. rms Company also offers company specific benefits, such as: * Onsite Clinic * Paid Parental Leave * Monthly Social Events * Annual Employee Appreciation Week * Volunteer Opportunities * Training and Development Opportunities * Tuition Reimbursement * Wellness Program Cretex Companies use cutting oils, solvents, and other chemicals in the manufacturing process. Testing is conducted on a periodic basis to ensure that all chemicals are kept well below the OSHA permissible exposure levels. Pay Range USD $20.00 - USD $24.00 /Hr. Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

Now Hiring: Commercial Kitchen Service Technicians Up to $3,000 Sign-On Bonus for Experienced Candidates! Who We Are Over the last 80+ years the General Parts Group has grown to become one of the largest Foodservice Equipment Support companies in the US. Our award-winning service department currently supports a field service force of over 200 technicians, providing service in 26 states throughout the USA. General Parts Service Technicians are encouraged to pursue CFESA training certifications, and many hold a 'Master Certification' designation, the highest level of achievement. Our team provides service, repair, and maintenance for cooking, refrigeration, beverage, HVAC and ware washing equipment. We stand ready to meet the ever-changing needs of our customers. Why Work for General Parts? While we are customer driven, we are also employee oriented. Our high employee retention rate and continuous investment in training ensures that we respond to our customers' needs with the most qualified and professional people in the industry. Position Summary The Field Service Technician is responsible for traveling to restaurant locations to diagnose, repair, and maintain commercial kitchen equipment-including hot-side appliances, refrigeration units, and light HVAC systems. This role requires operating a company vehicle safely, delivering prompt and reliable service, and ensuring minimal downtime for restaurant operations. The technician must provide exceptional customer support, communicate clearly with kitchen and management staff, and work independently with little supervision. We value your hard work and are proud of our competitive pay for performance philosophy. The hourly rate ranges from $35-$50 hourly, depending on experience. We're Excited if this is You! What We Need From You: * Must be at least 18 years of age * Minimum 1 year of commercial kitchen, refrigeration, or HVAC experience preferred * Completion of a satisfactory background check and drug screen * Valid Driver's License and Driving Record that meets our safety standards * EPA Certification Required for Refrigeration Techs * Proficiency in Microsoft Outlook * iPad Use & Familiarity Join our Team and Enjoy Amazing Benefits! * Competitive Compensation * Comprehensive Health Coverage * 401(k) Plan with Company Match * Healthy Work & Life Balance * CFESA Certification & Ongoing Training for Your Future * Company Service Vehicle, Tools, Apple Tablet, Cellphone, Uniforms, and Paid Laundry * Extra Earning Potential with Overtime (Saturday) & Double-Time (Sunday & Holidays) * Take part in our Town Shares Program - Share in our company's success! General Parts is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employee

Employment Type: Full-Time Shift: 1st Shift - Monday through Friday About the Role We are seeking a skilled Repair Services Technician to join our team at Polar Semiconductor. In this role, you will manage and maintain repairable assets, performing in-house service, testing, and calibration to ensure equipment reliability. Your work will directly support production by diagnosing failures, conducting repairs, and analyzing product failure trends to improve long-term serviceability. Key Responsibilities Identify the root cause of equipment malfunctions using diagnostic tools and technical expertise. Perform necessary repairs, including part replacement, system recalibration, and rebuilds. Conduct preventive maintenance to optimize equipment performance. Maintain accurate service records of all repairable assets, including repairs, maintenance activities, and parts usage. Prepare reports to analyze product failure trends and serviceability issues. Create and update documentation for services performed. Collaborate with fab technicians to gather details helpful for diagnostics and repair. Qualifications Required: Associate's degree in Automation, Electronics, HVAC, or comparable field. 4+ years of experience in electrical and mechanical maintenance. Strong knowledge and prior use of computerized maintenance management systems (CMMS). Understanding of instrumentation, controls, electrical systems, safety systems, and wiring diagrams. Familiarity with pneumatic systems and schematics. Ability to adapt, organize, and prioritize work in a fast-paced environment. Strong attention to detail and ability to follow specifications. Ability to obtain Hazmat certification. Preferred: Previous experience as a maintenance technician. Experience working with pumps, chillers, or rebuilds. About Us At Polar Semiconductor, we're on a mission to fulfill our future as the U.S.-based manufacturing partner of choice for differentiated power and sensor technologies. With a $525M investment from the CHIPs Act, the state of Minnesota, and private equity, we are looking for the best in the industry to help Polar transform from a captive fab to a pure-play foundry. We are doubling our manufacturing capacity and investing in advanced BCD and Wide Bandgap technology such as GaN. Polar has a long history in manufacturing automotive grade semiconductors and we are expanding in strategic markets such as national defense and AI data centers. We pride ourselves on state-of-the-art semiconductor manufacturing, a collaborative culture, and a commitment to helping our customers succeed. What We Offer Salary: $27.00 - $33.00 per hour (good-faith estimate), plus shift differentials where applicable. Benefits & Other Eligible Compensation: Includes health, dental, vision, disability and life insurance, 401(k) plan with company match, paid time off, annual bonus, and tuition reimbursement. Polar Semiconductor is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. We are committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions are based on business needs, job requirements, and individual qualifications, without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, veteran status, or any other status protected by the laws or regulations in the locations where we operate. About Minneapolis/St. Paul Area Our offices and manufacturing facility are located in Bloomington, Minnesota, a suburb of Minneapolis. Living in the Minneapolis / Saint Paul area offers a strong sense of community, a vibrant arts and music scene, and abundant outdoor activities year-round. The city boasts a lower cost of living than many major metros, excellent parks and lakes, and a well-educated workforce with diverse job opportunities. Its distinct seasons bring variety, from colorful autumns to lively summers filled with festivals and waterfront activities.

Kickstart your career with Johnson Controls through our 6-month BEST (Building Efficiency Sales Training) Program designed specifically for current students and recent college graduates. From day one, you'll be paired with a dedicated mentor and supported by a national network of sales professionals who want to see you succeed. This isn't just training, it's your launchpad to a fast-growing career in technical sales. Over 6 months, you'll combine classroom learning, hands-on fieldwork, and real customer interactions. You'll dive deep into our innovative HVAC solutions, sharpen your leadership skills, and learn how to build lasting customer relationships. By the end of the program, you'll be ready to: Partner with architects, engineers, and building owners to shape smarter, greener buildings Lead conversations as a subject matter expert who understands both the technical details and the bigger business picture Apply your engineering knowledge and business acumen in real-world projects that make an impact Step confidently into a career path with clear advancement opportunities and unlimited growth potential Why you'll Love it Here: Competitive pay: $72k-$103k starting salary Benefits that start Day 1 (medical, dental, vision, 401k) A mentor who's invested in your success, plus a support network of peers and leaders Fast-track growth: our 6-month BEST program combines training, mentorship, and hands-on learning to launch your career Real-world impact: your work helps create greener, smarter communities Collaborative, empowering culture where your ideas matter Check us Out: A Day in a Life at Johnson Controls | Sales Roles - YouTube What you will do You will increase market share by strategically selling Johnson Controls' HVAC products and services to commercial customers. In this program you will have a chance to apply your technical engineering knowledge and business acumen to work with customers to better understand their product and project needs by being the subject matter expert. You will learn our products and service offerings, customer relationship techniques and leadership skills in preparation for supporting customers in your territory alongside the sales team. As a critical part of our local sales team, you will be prepared to consult with architects, engineers, and building owners on product selections; partner with and learn from internal experts and deliver on business goals. How you will do it Estimate job bids and prepare proposals with contractors, architects and building owners Coordinate with vendors and subcontractors Complete sales calls to generate new business and build on existing relationships Present solutions to customers for consideration Collect and analyze market intelligence Turn projects over to operations team for execution and installations What we look for Required: Currently pursuing an Engineering bachelor's degree and graduating between December 2024 and June 2026 Strong analytical ability to solve programs and ability to learn quickly Ability to manage multiple projects and cross-functional teams with minimum guidance Strong communication and teamwork skills U.S. Citizenship or Permanent Residency Preferred: Mechanical or Industrial Engineering Degree, strongly preferred Previous sales or engineering experiences through co-ops, internships, part-time or full-time jobs (preferred) Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Job Description About Us: At Liberty Tire Recycling, we're building a sustainable future - one tire at a time. As North America's leading tire recycler, we offer a unique opportunity to make a real impact on the environment. Join our team of nearly 4,000 dedicated employees across 70+ sites and help us transform billions of pounds of waste tires into valuable resources. We're committed to innovation, a circular economy, and providing a rewarding workplace where you can grow and thrive. Job Summary: Liberty Tire Recycling is looking for a Millwright Fabricator/Industrial Equipment Maintenance Technician. As the Millwright Fabricator/Industrial Equipment Maintenance Technician, you would be responsible for preventative maintenance, fabrication, welding, diagnosis, and repairs to the company recycling production equipment and/or other equipment as deem necessary. Your expertise will ensure the efficiency and safety of our operations, contributing to our commitment to high standards and effective recycling processes at our Savage, MN. facility. We are looking for individuals who can work a varying schedule. Duties and Responsibilities: Processing/Operations: Responsible for the alignment, adjustment, maintenance and repair of processing equipment, facilities, and heavy equipment. Troubleshoot, repair, and maintain tire grinders, compressors, various styles of conveyors and other electro-mechanical systems. Apply knowledge of machinery and tools, including welding equipment, digital volt meters and other similar industrial equipment. Preventive Maintenance Program: Maintain perpetual maintenance program for all facility and plant equipment; perform predictive maintenance functions including testing, inspection, and lubrication of moving equipment. Understand and follow a work order maintenance system. Support the installation of new equipment including wiring, platforms, shredders, and other process/safety equipment. Skills and Abilities: High school diploma or equivalent. Understand and follow all OSHA and site-specific safety programs. 3 - 5 years of experience working with heavy equipment, production and processing equipment. Ability to work in a busy and changing environment both inside and outside in all seasons. Must be able to lift 50 pounds and periodically lift 80 pounds. Welding certification is preferred. Education and Experience: Prior experience in the tire recycling or manufacturing industry is a plus. Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance EEO Statement: Liberty Tire Recycling is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sex, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.

Job DescriptionMasterTech is on the search for experienced Field Service Mechanics in the St. Paul, MN area. The successful Heavy Equipment Mechanics will be responsible for the maintenance, diagnostics, and repair of a diverse line of heavy equipment (construction, earth moving, mining, aerial, cranes, etc.) across the field service region. Mechanics will be dispatched from their home to various client locations. Service vehicle privileges are included. Compensation: $35.00 - $50.00/hour, plus overtime after 8 hours/day. Comprehensive benefits plan, including medical, dental, vision, life, short/long-term disability, etc. 401K with matching contributions. 2 weeks prorated vacation, plus sick days, holidays, and PTO. Service truck, gas card, company cell phone, laptop, etc. Shift: Day shift, Monday to Friday. 8 to 12 hour days on average. Key Qualifications: 4+ years of experience as a Heavy Equipment Mechanic. Excellent understanding of mechanical, electrical, and hydraulic systems. Proficient using scanners, OEM diagnostic software, and reading schematics. Experience working as a Field Mechanic is preferred. Able to work independently, and able to communicate professionally with company clients/customers. Valid driver's license, clean driving record. CDL preferred, though not required.

Master Level Electric Vehicle Technician For over 70 years, we have built our brand on strong family values and a philosophy of serving our guests, team members, and communities with the understanding that every team member is critical to our success. If you are looking for a great career with great people, apply today! $35-$70/hour (Incentive-Based) Responsibilities * Diagnose, maintain, and repair vehicle systems including engine, transmission, steering, suspension, brakes, etc. * Utilize diagnostic tools, special service equipment and standard test drives to monitor vehicle components and systems * Perform work efficiently to dealership specifications * Maintain continuous communication with Service Advisors of needed services to ensure excellent customer communication * Ensure warranty repairs meet all manufacturer specifications Qualifications * Valid Driver's License with clean motor vehicle record * Excellent time management skills and attention to detail while working under tight timelines * Willingness to follow direction while working independently * Ability to walk and stand for long periods of time in all weather conditions * Ability to drive both automatic and standard transmission vehicles * ASE certifications are ideal What We Offer * Medical, Dental & Vision * Short Term & Long Term Disability * HSA/Flexible Spending * 401k with Match * Paid Vacation * Growth Opportunities * Paid Training Offers of employment are contingent upon successfully passing a criminal background check and review of motor vehicle records.