Service technician jobs in Novato, CA

ABM Industries is seeking an Electrical Field Test Technician (NETA 3,4 or equivalent) to join our Electrical Power Services team. The Electrical Field Test Technician is responsible for the safe and efficient installation and testing of electrical power distribution equipment for customers in the assigned territory. In this role, you will travel approximately 50% of the time, working both independently and with a crew, and handle the performance and management of routine, moderately complex, and complex tasks and projects, record-keeping, evaluation of test data, and preparation of field service reports. Additionally, Level 3 and 4 Technicians will be responsible to coach, mentoring, training, developing, and supervising Level 1 and 2 Trainees and Assistants. Position Summary Pay: $60.00-$80.00 hourly. The pay listed is the salary range for this position. A specific offer will vary based on applicant's experience, skills, abilities, geographic location, and alignment with market data. ABM offers a comprehensive benefits package. For information about ABM's benefits, visit ABM 2025 Employee Benefits | Staff & Management Essential Functions Travel to customer sites to inspect, test, troubleshoot, perform start-up and collect data on electrical systems. Supervise Trainees, Assistants, and Technicians in the completion of electrical testing duties. Guide, mentor, train, and supervise Level 1 and 2 certified NETA Trainees and Assistant Technicians. Observe testing, assign work on projects to capable technicians, ensure testing of similar items is consistent across test technicians Track project scope completion and communicate ABM and Customer Management Maintain, test, repair, rebuild, and replace low, medium, and high-voltage switchgear and circuit breakers. Troubleshoot automatic transfer switches. Test and inspect low, medium, and high-voltage cable installations. Maintain, test, and repair transformers and related equipment. Test and calibrate solid-state and electromechanical relays. Perform relay calibration and power metering. Conduct low and medium-voltage motor control center and contractor testing. Start-up, troubleshoot, and repair generator controls and transfer schemes. Test and commission protection and control systems on high voltage substations. Sample and interpret insulated fluids. Complete Job Hazard Analyses including but not limited to arc-flash and shock analyses Review and submit timecards, expense, and project reports. Document test results and complete field reports. Rotate emergency on-call duty. Maintain strict compliance with regulatory laws Assist in the sales process acting as the technical expert in electrical testing and maintenance of electrical equipment Qualifications Must have a minimum of 5 years experience in electrical testing. The candidate should have experience working with a team. Experience in working on projects Familiar with NETA Acceptance and Maintenance Testing Standards Familiar with NFPA70E Electrical Safety standards Ability to troubleshoot electrical performance deficiencies Ability to travel regionally and nationally 50% Knowledgeable in lockout/tag-out and hazardous energy control procedures. Clean Driving Record and Drug-Free Preferred Qualifications Familiar with NETA Acceptance and Maintenance Testing Standards Hold a current NETA Level 3 or 4 or NICET equivalent, certification #200 About Us ABM (NYSE: ABM) is one of the world's largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM's comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries - from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit ******************* ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call ************. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you'll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you're looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ******************* ABM does not accept unsolicited resumes.

Who We Are We are a community built on care. Our caregivers and supporting staff extend compassion to those in need, helping to improve the health and well-being of those we serve, and provide comfort and healing. Your community is our community. Our Story We started out as a small operation in California. In May 1969, we acquired four hospitals, some additional care facilities and real estate for the future development of hospitals. Over the years, we've grown tremendously in size, scope and capability, building a home in new markets over time, and curating those homes to provide a compassionate environment for those entrusting us with their care. We have a rich history at Tenet. There are so many stories of compassionate care; so many "firsts" in terms of medical innovation; so many examples of enhancing healthcare delivery and shaping a business that is truly centered around patients and community need. Tenet and our predecessors have enabled us to touch many different elements of healthcare and make a difference in the lives of others. Our Impact Today Today, we are leading health system and services platform that continues to evolve in lockstep with community need. Tenet's operations include three businesses - our hospitals and physicians, USPI and Conifer Health Solutions. Our impact spreads far and deep with 65 hospitals and approximately 510 outpatient centers and additional sites of care. We are differentiated by our top notch medical specialists and service lines that are tailored within each community we serve. The work Conifer is doing will help provide the foundation for better health for clients across the country, through the delivery of healthcare-focused revenue cycle management and value-based care solutions. Together as an enterprise, we work to save lives and can accept nothing less than excellence from ourselves in service of our patients and their families, every day. Up to $20,000 Sign-On bonus based on experience San Ramon Regional Medical Center began serving residents of the San Ramon Valley and its surrounding communities in 1990. Located on a hillside overlooking the valley, we are a 123-bed, acute-care hospital, primary stroke center, and a cardiac heart surgery hospital. San Ramon Regional Medical Center provides comprehensive inpatient and outpatient services. Personalized service and a patient-centered philosophy are distinctive qualities of our facility. We offer competitive salaries and benefits including a matching 401(k), several health & dental plans to choose from, generous tuition assistance plans, and relocation assistance for select positions. Comprehensive benefits for medical, prescription drug, dental, vision, behavioral health and telemedicine services Wellbeing support, including employee assistance program (EAP) Time away from work programs for paid time off, long- and short-term plan coverage Savings and retirement including a 401(k) Plan with a 50% match up to 6% of pay, employee stock purchase plan, flexible spending accounts, retirement readiness tools, rollover support, and financial well-being counseling Education support through tuition assistance, student loan assistance, certification support, and online educational program Additional benefits life insurance, supplemental health protection plans, auto and home insurance, legal counseling, identity theft protection, and employee discount program Registered nurses - Retirement medical benefit account (RMBA) - 2% of annual eligible income set aside in accordance with program guidelines Benefits may vary by location and role Position Summary: As a senior member of the Diagnostic Imaging Department, this position produces clinical diagnostic radiographic images. Operates diagnostic imaging equipment, prepares room, equipment, supplies and medications. Provides leadership to Rad Tech II technologists or other staff as is needed. Provides patient care services using general and specialized imaging modalities under the direction of a physician but not requiring constant technical supervision. Provides diagnostic imaging services to patients of all ages. Applies ionizing radiation in the performance of a variety of technical procedures for radiological diagnosis. Responsible for patient care safety. Assists physicians in the performance of interventional procedures and the administration of contrast media. Assumes responsibility for designated procedures and equipment. Participates in orientation of Radiology Department staff. Works cooperatively with members of the health care team to maintain standards for professional Diagnostic Imaging Technologist practice in the clinical setting. Sign-on bonus doesn't apply to internal applicants Minimum Education: Graduate of an accredited radiology program Minimum Experience/Skills: Up to 1 year experience Licenses/Certificates/Credentials: Must possess and maintain throughout the duration of employment: Current Basic Life Support (BLS) certification for Healthcare Provider issued by the American Heart Association Current Certified Radiologic Technologist (CRT) license issued by the California Department of Public Health Current certification and registration with the American Registry of Radiologic Technologists (ARRT) Current Fluoroscopy Permit issued by the California Department of Public Health (or within 6 months of hire/ transfer) Venipuncture certification required, if applicable #LI-KB6 Tenet complies with federal, state, and/or local laws regarding mandatory vaccination of its workforce. If you are offered this position and must be vaccinated under any applicable law, you will be required to show proof of full vaccination or obtain an approval of a religious or medical exemption prior to your start date. If you receive an exemption from the vaccination requirement, you will be required to submit to regular testing in accordance with the law. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Tenet will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. Tenet participates in the E-Verify program. Follow the link below for additional information. E-Verify: ***************************** The employment practices of Tenet Healthcare and its companies comply with all applicable laws and regulations. ********** Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Tenet will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship.

Entertainment Technicians at the park are responsible for the operation and basic installation/maintenance of all show productions sound, video, special effects, and lighting equipment. Technicians will provide support for all shows, educational presentations, themed events, and seasonal events such as Fright Fest and Holiday in the Park. Installation of equipment may require working at height including the use of ladders, climbing scaffolding, and use of a man-lift. Job Duties: Perform daily operational duties to assist the department to include covering open positions, communicating show changes, schedule changes and other details and sharing information with co-workers and management. Perform all assignments and responsibilities as outlined for a stagehand, spotlight operator, light board operator, audio operator, special effects operator, and camera operator. Operate a spotlight, light board, audio console, video camera, and/or special effects equipment for shows and special events in the park. Will occasionally perform stagehand show scene shifts and other behind the scene duties for shows. Provide basic troubleshooting and maintenance for scenic elements, sound system, video equipment, special effects equipment, lighting system, lighting fixtures or other technical components. Maintain cleanliness and maintenance standards through all assigned tasks. Consistently set the example for following all park policies and procedures. Maintain departmental and area safety policies and procedures. Perform other functions as directed by management for the good of the department and park. Minimum Qualifications: Must be at least 18 years of age. Knowledge of technical theater, including but not limited to: theater safety, audio and lighting systems, special effects, video, theatrical scenery and drapery, set decorating, scenic and prop construction, maintenance and repair. College level experience in Theatre or related discipline or equivalent related employment experience. Excellent written and oral communication skills. Must be able to work flexible schedule including early mornings/days/evenings/late nights/weekends/holidays. Must be team-oriented with a positive attitude. Be capable of successfully interacting with various entertainers, technicians, outside contractors, entertainment and park staff, and personnel from other departments. Ability to handle multiple projects and tasks simultaneously. Hands on capability to operate technical equipment and troubleshoot technical problems. Must be able to work both indoors and outdoors in all types of weather conditions and in both natural and artificial lighting. Must be able to lift up to 50 lbs. Working Conditions: Work is performed primarily outdoors in all weather conditions. Lighting is both natural and artificial. Equipment used includes radios, microphones, and cleaning tools. Physical demands include standing, walking, lifting, carrying, climbing, bending, stooping, and reaching. Days and hours will vary and will include weekends, evenings and holidays. Position will require close contact with Park Guests. If you are able to answer "YES" to all of the following questions, please continue the application process by clicking "Apply" Can you provide legal documentation establishing your identity and eligibility to be legally employed in the United States? Are you able to perform the essential functions of the job for which you are applying with or without reasonable accommodation? Within the last 90 days, can you state that you have not used illegal or social drugs (excluding marijuana), such as MDMA (Molly), cocaine and crystal methamphetamine? I am willing to agree that future text messages relating to Six Flags, Inc., including company news, job posting application status updates, and other information, may be sent on behalf of Six Flags, Inc. to the cell phone number I provide.

We are seeking a dynamic individual to manage the day-to-day operations in a Biotech environment. This is an exciting and unique opportunity to support our Pharmaceutical Development team's office and lab space. The successful candidate will be able to thrive in a fast-paced, ever-changing environment, and manage competing priorities, while maintaining a professional demeanor with employees. In this critical role, you will serve as the primary interface between our company and its service providers, vendors, and consultants. This position requires great attention to detail, organization, and professionalism, and the ability to maintain an efficient business environment. Responsibilities · Performing and/or coordinating repair and maintenance activities for all facilities including labs in the Novato · Brisbane and South San Francisco offices. · Assist with lab operations working directly with lab employees to maintain equipment and daily supplies and needs. Requirements · Bachelor's degree, an Associates with 1+ year experience, or, extensive experience in the EA and project coordinator role. · 1+ years' experience as a Project Administrator or similar role desired · Proficiency in Microsoft Office Suite · Excellent attention to detail, organized and methodical · Ability to quickly produce quality project meeting notes · Adept to organize large amounts of data, and deal effectively with repetitious work · Exceptional verbal and written communication skills · Skilled at prioritization, multi-tasking and excellent organizational skills · Maintain confidentially · Flexible Hours

**Onsite | Mountain View, CA** We are seeking a highly skilled Project Management Office (PMO) professional to lead transformation initiatives across core financial workstreams-Procure-to-Pay (P2P), Record-to-Report (R2R), and Quote-to-Cash (Q2C)-within a dynamic Technology Product organization. This role requires strong program management expertise and familiarity with financial systems. Experience with Oracle Financial Systems and tools such as Aravo and Third Party Risk Management (3PRM) is highly advantageous. Due to client requirement, applicants must be willing and able to work on a w2 basis. For our w2 consultants, we offer a great benefits package that includes Medical, Dental, and Vision benefits, 401k with company matching, and life insurance. Rate: $75 - $85 / hr. w2 Responsibilities: Project Leadership & Execution Lead and execute multiple financial systems workstreams. Partner with engineers, BSAs, and cross-functional stakeholders to ensure alignment with milestones and UAT readiness. Partner with overseas development center to ensure timelines and deliverables are met Serve as the PMO to the Group Product Leader -attending key meetings, preparing presentations, and maintaining deliverables. Interface with the business counterparts for dependencies, risks and impact Stakeholder Engagement Facilitate stakeholder meetings and communicate risks, issues, deliverables, and achievements to leadership. Translate requirements into actionable plans and ensure timely execution. Project Governance & Tracking Maintain and update project plans based on meeting outcomes. Document signoffs and decisions proactively. Monitor project health using RAG status (Red, Amber, Green) and escalate as needed. Testing & Quality Assurance Lead testing efforts across financial modules. Ensure proper configurations, testing and integrations are happening Create and manage detailed test cases and UAT scenarios. Reporting & Dashboards Build and maintain JIRA dashboards for visibility into testing, progress, and blockers. Provide ad hoc reporting and insights to leadership. Requirements: Experience: 7+ years in program/project management, preferably in financial systems transformation. Technical Knowledge: Strong understanding of Oracle Financial Systems; familiarity with tools like Aravo and 3PRM is a plus. Skills: Proven ability to manage complex, multi-workstream programs. Expertise in stakeholder management and cross-functional collaboration. Strong analytical and problem-solving skills. Proficiency in JIRA and project tracking tools. Education: Bachelor's degree in Business, Finance, Technology, or related field; PMP or similar certification preferred. Please be advised- If anyone reaches out to you about an open position connected with Eliassen Group, please confirm that they have an Eliassen.com email address and never provide personal or financial information to anyone who is not clearly associated with Eliassen Group. If you have any indication of fraudulent activity, please contact ********************. Skills, experience, and other compensable factors will be considered when determining pay rate. The pay range provided in this posting reflects a W2 hourly rate; other employment options may be available that may result in pay outside of the provided range. W2 employees of Eliassen Group who are regularly scheduled to work 30 or more hours per week are eligible for the following benefits: medical (choice of 3 plans), dental, vision, pre-tax accounts, other voluntary benefits including life and disability insurance, 401(k) with match, and sick time if required by law in the worked-in state/locality. JOB ID: JN -072025-103044

Insight Global is hiring a Maintenance Technician to join Cushman & Wakefield in their facilities management support to their end client in the San Francisco market. This is a 4-month contract opportunity with the possibility of extension or conversion to full-time employment - dependent on performance in the role and business needs. This position requires an onsite schedule, 5 days per week. The role involves performing general building maintenance and labor tasks as assigned by supervisors and Facility Managers (FMs), including loading, unloading, moving materials, and running errands for various projects. Responsibilities include supporting HVAC, Building Management Systems (BMS), Fire Life Safety Systems (FLSS), elevator operations, equipment repairs, and replacing or repairing door hardware, locks, and keys. The position also requires interior and exterior painting, with expertise in surface preparation and paint application on wood, metal, and drywall, as well as minor repairs to these surfaces. Additional duties include replacing light bulbs, lamps, and ballasts, and cleaning fixtures. The employee will escort third-party vendors to ensure work is completed correctly and in compliance with client safety and security standards. Prompt response to emergency situations and customer service requests is essential. The role demands adherence to all applicable codes, regulations, and company directives, as well as safe work practices. Proficiency in using technology such as smartphones, tablets, computers, web-based applications, and building automation systems is required. The employee must complete all scheduled safety trainings and comply with the company's uniform dress code, maintaining a neat appearance at all times. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices • Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine • Involves movement between departments, floors, and properties to facilitate work • Ability to speak clearly so others can understand you • Ability to read and understand information presented orally and in writing • Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics REQUIRED SKILLS AND EXPERIENCE - High school diploma or GED - 4+ years of experience in a commercial property setting - Strong communication and problem-solving skills - Computing skills in Excel, Work and Outlook - Must have a valid driver's license and positive driving record - Ability to meet physical demands NICE TO HAVE SKILLS AND EXPERIENCE - Technical, vocational or on-the-job training in at least one of the following areas: HVAC, electrical, mechanical, process controls, mechanical power transmissions, painting, plumbing, carpentry or engine repair

Job DescriptionBenefits: 401(k) matching Bonus based on performance Dental insurance Employee discounts Free uniforms Health insurance Paid time off At Big O Tires, we strive to be the preferred tire and auto service retailer in every community while making Big O Tires a great place to work. We offer affordable benefits, profit sharing bonuses, paid time off, a family oriented work environment, and all you need to be successful. Join our team today! POSITION SUMMARY As an Automotive Service Technician for Big O Tires, you will perform service and installation activities associated with store products and services in an accurate and timely manner. ESSENTIAL DUTIES AND RESPONSIBILITIES Provide fast and friendly customer service Promote sales through explaining benefits of service and products to customers Maintain timely and professional communication with management, employees, vendors and customers Keep supervisor informed of any maintenance problems and/or any issues that need attention Safely operate customer vehicles with automatic and manual transmissions Competent in diagnosing drivability and electrical failures on most makes and models Mentor fellow technicians Drain oil and change oil filter; lubricate vehicles; install, rotate and balance tires and properly torque wheels; check and fill various fluids; check and replace various filters and lights Unload transport trucks and warehouse tires and inspect disposed tires for adjustment Maintain a clean environment, tools and equipment, using company guidelines Know and adhere to company policies and procedures Utilize and perform all duties on the company checklists to meet consistent adherence to policies, procedures and expectations QUALIFICATIONS ASE Certification (Preferred) Availability to work Saturdays, and after regular business hours as needed Reliable transportation to work Ability to learn new concepts and use technical materials Ability to consistently operate a computer and other office productivity machinery Capability to safely operate automatic and manual transmission vehicles Willingness to work with hazardous materials and in outdoor weather conditions Complies with Personal Protection Equipment (PPE) regulations Ability to remain in a stationary position (standing and/or driving) for up to nine hours per shift Ability to move and lift up to 75 pounds Ability to meet company requirements including successful pre-employment drug screening, Motor Vehicle Report (MVR), and criminal background check We are an equal opportunity employer, dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, age, sex, religion or national origin. We are committed to building a culturally diverse faculty.

Benefits: 401(k) matching Bonus based on performance Dental insurance Employee discounts Free uniforms Health insurance Paid time off At Big O Tires, we strive to be the preferred tire and auto service retailer in every community while making Big O Tires a great place to work. We offer affordable benefits, profit sharing bonuses, paid time off, a family oriented work environment, and all you need to be successful. Join our team today! POSITION SUMMARY As an Automotive Service Technician for Big O Tires, you will perform service and installation activities associated with store products and services in an accurate and timely manner. ESSENTIAL DUTIES AND RESPONSIBILITIES Provide fast and friendly customer service Promote sales through explaining benefits of service and products to customers Maintain timely and professional communication with management, employees, vendors and customers Keep supervisor informed of any maintenance problems and/or any issues that need attention Safely operate customer vehicles with automatic and manual transmissions Competent in diagnosing drivability and electrical failures on most makes and models Mentor fellow technicians Drain oil and change oil filter; lubricate vehicles; install, rotate and balance tires and properly torque wheels; check and fill various fluids; check and replace various filters and lights Unload transport trucks and warehouse tires and inspect disposed tires for adjustment Maintain a clean environment, tools and equipment, using company guidelines Know and adhere to company policies and procedures Utilize and perform all duties on the company checklists to meet consistent adherence to policies, procedures and expectations QUALIFICATIONS ASE Certification (Preferred) Availability to work Saturdays, and after regular business hours as needed Reliable transportation to work Ability to learn new concepts and use technical materials Ability to consistently operate a computer and other office productivity machinery Capability to safely operate automatic and manual transmission vehicles Willingness to work with hazardous materials and in outdoor weather conditions Complies with Personal Protection Equipment (PPE) regulations Ability to remain in a stationary position (standing and/or driving) for up to nine hours per shift Ability to move and lift up to 75 pounds Ability to meet company requirements including successful pre-employment drug screening, Motor Vehicle Report (MVR), and criminal background check We are an equal opportunity employer, dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, age, sex, religion or national origin. We are committed to building a culturally diverse faculty. Compensation: $30.00 - $60.00 per hour From flat tires and oil changes to rotor resurfacing and that weird clunking sound you've been hearing for a week, there are a lot of Big Oh Nos for your car. Luckily, Big O Tires has the Big O Yes for all of them. For over 50 years, our customers have trusted us to offer straight answers and reliable service. Big O Tires offers a wide range of diagnostic, repair and routine maintenance services, backed by one of the best national services warranties in the business. Most Big O Tires stores are individually owned and operated by franchisees, and each franchisee makes the staffing and hiring decisions for the individual location(s). However, the Big O franchisees are always looking for new faces with experience and desire to serve Big O Tires store customers. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Big O Tires Corporate.

TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Fiber Splicer to join our team in Fairfield, CA. In this role you will complete installation, repair and testing of fiber and the different components, splice loose tube and ribbon fiber in compliance with modern standards and connect and configure fiber optic networks for facilities while troubleshooting problems. Why TAK? * Full Time * Paid Bi-Weekly * Compensation: $30 - $45 per hour, DOE * Full Benefits Package (Medical, Dental & Vision) * Paid Time Off * 401(k) with Company Match! * 25K Company Paid Life Insurance * Independent Work & Team Collaboration * Career Development & Advancement Opportunities! The Role * Complete installation, repairs and testing of fiber and the different components * Splice loose tube and ribbon fiber in compliance with modern standards * Connect and configure fiber optic networks for facilities while troubleshooting problems * Read splicing print and apply color code to print reading * Test, activate, and troubleshoot equipment after installation * Basic daily maintenance of TAK provided vehicle: check fluids, clean and organize vehicle * Ongoing monitoring to ensure that splicing operations are completed according to customer and industry specifications * Safely operate and use a bucket truck to complete daily construction assignments, and pull the fiber trailer as needed * Complete daily production reports, mark-up maps, keep track of work hours, complete "as-built maps" for areas built and tracks daily production * Reconcile all issued parts and materials daily to ensure accurate material usage counts * Frequently works with minimal or no supervision * Perform general clean up * Other duties as assigned Requirements * 3+ years of fiber splicing experience required * Ability to use and understand splicing technology such as OTDRs, VFL, OLTS and Fusion Splice * Prior experience with CWDM and DWDM, prepping & splicing from 6ct to 288ct or more * Ability to work outside of business hours when needed, overtime, holidays, evenings, weekends etc., in all seasons * Ability to safely operate a vehicle while pulling a trailer * Ability to complete tasks with small components and wires * Ability to judge distance and space relationships * Ability to interpret splicing print and distinguish/apply color code to print reading * Ability to use specialty tools * Ability to carry, climb, operate, and work upon an extension ladder (approximately 28 feet high and 75 pounds) * Ability to complete work outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time * Ability to safely work and navigate various terrains, managing equipment, safety equipment and tools * A body weight of no more than 275 pounds to perform ladder work safely. Safety is our #1 Priority. If personal safety is not compromised, an accommodation may be available based on previous ladder experience in a similar role * Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving * Class A CDL preferred * Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting *****************************. Salary Description $30 - $45 per hour, DOE

Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern. * Performs all duties as assigned and adheres to TEAM's Core Values. * Perform control valve repair in accordance to TEAM's quality procedures. * Directly communicate with customers. * Work autonomously in valve repair process. * Ensure all diagnostic, testing, and repair reports are in compliance with quality system. Job Qualifications * Education preferred: high school diploma or GED equivalent. * Minimum 1- 5 years of experience. * Valve Manufacturers Training Courses and/or certifications preferred. * 0 to 30% minimum travel requirement. Work Conditions * Position is based out of a branch or site location. * Field duties require indoor and outdoor work in a plant atmosphere. * Interaction with other crew employees, as well as supervisors and client personnel. * Working in plant and/or shop areas around production machinery with extreme noise levels. * Must be able to wear safety equipment as required by the safety department for personal protection. * May be at more than one job site in a day and must be able to tolerate climate changes. * May be required to travel out of town on a periodic basis Physical and Mental Requirements * Ability to lift and carry 75 pounds. * Must be able to walk and climb except when performing non-field duties. * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively * Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations. * Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties. * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations. * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells. * Ability to maintain focus and multitask effectively. * Excellent communication skills. Additional Job Description Anticipated compensation for this role is $47,840.00 - $93,600.00 per year plus benefits. Note: Disclosure as required by Cal. Lab. Code § 432.3 of the pay range for this role when being hired into our locations in California. Team reserves the right to pay more or less than the pasted range. Actual compensation will be based on experience, qualifications, and geography.

About the Role Position involves all aspects of the assembly processes including putting up inventory stock, parts pulling, assembling, repair/restock/warranty evaluations, testing and service, wash/prep/paint, packing, shipping /receiving and general clean up. The main focus of the position at this time is in the Returned Goods Authorization Department. Pay Range $21 - $30 (hour) Hand assembly of gear motors, reducers, and adjustable drives, maintain parts stock between assembly lines, putting up inventory stock, parts pulling, repair/restock/warranty evaluations, testing and service, wash/prep/paint, packing, shipping/receiving and general clean up. Must read and understand supporting documentation for the work area, use calipers, depth & paint millage gauges, and visually inspect all work and rework as necessary. Assess each situation and do not perform any tasks which s/he feels is unsafe, on which s/he has not received training, or engage in any unsafe work practices. Report any unsafe condition to his/her manager. May be required to travel on Company business to any required destination domestically as well as overseas. May be required to stay overnight for extended periods of time, obtain lodging, and occasionally conduct business in the evenings, weekends, and holidays and outside of normal business hours. Possess and maintain a valid Driver's License and driving record satisfactory to SEW-EURODRIVE or otherwise be able to transport yourself to and from various locations, including customer facilities, to engage in diverse business activities. Must comply with all current ISO Quality and Work Instructions for job, all Company Safety rules, and all other Company rules, policies and procedures. Although we have described above what we are generally looking for, we are very likely missing other attributes and skills that may make you a great fit! Please tell us about your other skills and abilities by applying and listing your additional attributes. A 10% shift premium is paid for 2nd and 3rd shift positions. SEW-EURODRIVE provides a generous benefits package to all full time employee. These benefits start on DAY ONE! There is no monthly premium required for Employee's coverage: • Medical Insurance - Includes Medical, Dental, Vision, Audio, and Prescription Drug coverage + $125 annual reimbursement for purchase of eligible vitamins & minerals • Life Insurance worth 2.5 times annual base pay. Includes Accidental Death & Dismemberment • Disability - Includes both Short Term Disability and Long Term Disability • Flexible Spending Account (FSA) for Medical and/or Dependent Care Made available annually during open enrollment • Timely Evaluations with potential for a pay increase - New Employees are evaluated every six months for the first two years then annually thereafter • Paid Vacation - 2-weeks of vacation accrual per year to start, which increases after five years and ten years of service • Holiday Pay - Twelve (12) paid holidays per year • Retirement Benefits - Includes 401(k) with Profit Sharing Contribution and 200% Company Match on the first 3% that you defer to your 401K account • Additional Paid Time Off (PTO) for hourly positions - Unused time is paid out annually • Paid Parental Leave - To assist and support new parents with balancing work and family matters • Onsite Clinic Services - On location medical services by licensed providers at no cost to employees • Education Assistance Programs - Student Loan Repayment / Tuition Assistance options • Counseling Resources - Easy and convenient access to professional counseling services online • Wellness Resources - Utilizing a comprehensive, interactive, and personalized wellness program with potential to earn points for awards / gift cards • Uniforms and Subsidies - Uniforms (for shop employees) are provided and a subsidy for the annual purchase of safety shoes is included • Employee Assistance Programs - Five programs to help employees navigate challenging life circumstances • Insure Choice Plan Group Discounts - Auto, Home, Pet coverage, Legal insurance, and more at a group discount rate Additional job requirements and responsibilities would be discussed during the interview process.

Technician - Oakland, California Location: 4701 Oakport Street Oakland, CA 94601 Compensation Range: $41.80 - 50.00, $2,000 Sign-on Bonus Towlift Oakland is looking for a experience Field Service Technician! Click here to watch a day in the life of a forklift technician! Troubleshoot, repair, and maintain industrial vehicles, including forklifts, railcar movers, container handlers, and terminal tractors. Perform routine maintenance and breakdown repair work in the field at customer sites. Prioritize work orders, comply with safety incident reporting, and ensure all paperwork is submitted timely and accurately. Provide excellent customer service and maintain company-provided assets, including all work tools and vans. ESSENTIAL FUNCTIONS Diagnose and troubleshoot customer breakdowns; provide proper repairs to minimize equipment downtime and initiate estimates for on-site repairs. Set up and operate lathe, drill press, grinder, and other metalworking tools to make and repair parts. Perform routine scheduled maintenance, including standard inspections, repair and replace defective parts, lubricate parts, and repair electrical equipment. Inspect used parts to determine changes in factory specifications. Review repair work and scheduled maintenance results with customers, communicating any potential issues. Responsible for field quoting and communicating services to customers. Utilize the Mobile Service application to close the day, fill out work orders, obtain customer signatures, finalize jobs, and mark them as complete. Provide daily status updates to the dispatchers and review any customer issues or concerns with the dispatcher and account manager. POSITION QUALIFICATIONS EDUCATION High School Diploma or equivalent. Vocational or technical certification preferred. REQUIREMENTS 2+ years of experience in a service technician role. Previous experience with hydraulics and computer diagnostics. Ability to interpret and apply schematic diagrams. Valid Driver's License and driving record acceptable to insurance company. Ability to work independently and to effectively prioritize demands and execute tasks. Strong attention to detail, project management, and organizational skills. Strong written and verbal communication skills with the ability to convey information to internal and external customers in a clear and concise manner. Adhere to company's core values. We are a drug free workplace. All positions require pre-employment screening. BENEFITS All shifts Monday - Friday 7:00 am - 3:30 pm $2,000 sign-on bonus and referral bonus opportunities Competitive salary with monthly bonus opportunities Comprehensive benefits include medical, dental, vision, and 401(k) with employer match and profit-sharing. Tool loan program Annual Boot, Safety Glasses, and Gym Reimbursement Programs Company provided: Modern service van: Including fuel card and maintenance Laundered uniforms Technology: iPad, laptop, and iPhone Specialized tools PPE Towlift is an equal opportunity employer, a ll applicants will be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. We are proud employers of Veterans, helping them to navigate the transitions of life and reach their fullest potential.

TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a **Fiber Splicer** to join our team in **Fairfield, CA** . In this role you will complete installation, repair and testing of fiber and the different components, splice loose tube and ribbon fiber in compliance with modern standards and connect and configure fiber optic networks for facilities while troubleshooting problems. **Why TAK?** + Full Time + Paid Bi-Weekly + **Compensation: $30 - $45 per hour, DOE** + Full Benefits Package (Medical, Dental & Vision) + Paid Time Off + 401(k) with Company Match! + 25K Company Paid Life Insurance + Independent Work & Team Collaboration + Career Development & Advancement Opportunities! **The Role** + Complete installation, repairs and testing of fiber and the different components + Splice loose tube and ribbon fiber in compliance with modern standards + Connect and configure fiber optic networks for facilities while troubleshooting problems + Read splicing print and apply color code to print reading + Test, activate, and troubleshoot equipment after installation + Basic daily maintenance of TAK provided vehicle: check fluids, clean and organize vehicle + Ongoing monitoring to ensure that splicing operations are completed according to customer and industry specifications + Safely operate and use a bucket truck to complete daily construction assignments, and pull the fiber trailer as needed + Complete daily production reports, mark-up maps, keep track of work hours, complete "as-built maps" for areas built and tracks daily production + Reconcile all issued parts and materials daily to ensure accurate material usage counts + Frequently works with minimal or no supervision + Perform general clean up + Other duties as assigned Requirements + 3+ years of fiber splicing experience **required** + Ability to use and understand splicing technology such as OTDRs, VFL, OLTS and Fusion Splice + Prior experience with CWDM and DWDM, prepping & splicing from 6ct to 288ct or more + Ability to work outside of business hours when needed, overtime, holidays, evenings, weekends etc., in all seasons + Ability to safely operate a vehicle while pulling a trailer + Ability to complete tasks with small components and wires + Ability to judge distance and space relationships + Ability to interpret splicing print and distinguish/apply color code to print reading + Ability to use specialty tools + Ability to carry, climb, operate, and work upon an extension ladder (approximately 28 feet high and 75 pounds) + Ability to complete work outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time + Ability to safely work and navigate various terrains, managing equipment, safety equipment and tools + A body weight of no more than 275 pounds to perform ladder work safely. **Safety is our #1 Priority. If personal safety is not compromised, an accommodation may be available based on previous ladder experience in a similar role** + Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving + Class A CDL preferred + Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) _The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law._ _TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting *****************************._ Salary Description $30 - $45 per hour, DOE

Job Description We are assisting an on-demand, autonomous ride-hailing company in hiring a Client Services Technicianto provide IT support to end-users. In this role, you will be responsible for fielding all incoming support requests, prioritizing/assigning them to the appropriate party, and ensuring that requests are addressed in a timely manner. We're looking for someone who has 1+ years of experience in a similar IT support role, including strong problem-solving skills, excellent written communication skills, and demonstrated time management skills. RATE: $42 to $47 per hour LENGTH: 6 months to 1 year with a high possibility of extension As a Client Services Technician, you'll: Provide onsite support 5 days per week. Manage Tier 1 support requests via emails, Slack, and Jira/ServiceNow service desk tickets. Manage, work, and track tickets in ticketing systems. Manage escalations to other IT staff. Identify and report support trends. Create, manage, and troubleshoot accounts and access via Active Directory. Requirements 1-3 years of experience in a similar IT Support role Analytical and problem-solving skills to troubleshoot and diagnose issues Demonstrated written communication skills to create useful support logs Time management skills to provide updates and fixes within a promised time frame Multitasking skills to assist multiple employees at once Observational skills to recognize warning signs that indicate potential problems Customer service skills to interact professionally and positively with employees and coworkers High-level knowledge of commonly used software, hardware, and applications Benefits Pre-tax commuter benefits Employer-subsidized healthcare benefits Flexible Spending Account for healthcare costs All costs covered for short- and long-term disability and life insurance 401k package Commitment: This is a full-time, ongoing contract position, open to candidates local to the Foster City area. contract position, open to candidates local to the Foster City area.

Job Description CTB Fiber Optic Services, Inc. is a leader in single-source solutions for engineering, design, emergency restoration services and fiber implementation. We specialize in fiber optic splicing and testing services with all our work being guaranteed 110%. We ensure this guarantee by having a team of dedicated people who perform their work with these goals in mind: “Best Quality Workmanship for Customer Satisfaction”. We can perform our services in new or existing, aerial or underground builds, as well as in POPS, remote sites, OCEF cabinets, transmission equipment, Fiber Management Systems, within any rack equipment. We have the experience and ability in building many types of enclosures to include 3M, Coyote, Raychem, Fiberdome, Ditel, Windsor, ACT, among many others. We are looking for a few good people to join the team. $1000.00 signing bonus. Positions are available for individuals with a current driver's license. All who apply will be given serious consideration. This is an offer for full-time employment. We encourage all who are interested to apply. Overview: Skilled in fiber optic splicing with an understanding in engineering and splicing drawings, the fiber splicer will perform tasks associated with the construction/upgrade of fiber systems. They will be responsible for terminating, splicing, bonding/grounding, documenting, and testing fiber optic cables within the systems networks and their related equipment resulting in maximum operating efficiency. Responsibilities: Performs splicing of fiber optic cables, both fusion, mass fusion and mechanical, to include terminating various types of connectors. Constructs proper splicing in fiber enclosures and fiber termination panels to include grounding, bonding, isolation, storage and sealing in both aerial and underground applications. Plans and installs fiber distribution panels, relay racks or cabinets with all associated hardware and electronics in a head end or OTN site. Executes large fiber count ring cuts/hot cuts during scheduled maintenance windows with minimum downtime to the network or customer services. Performs fiber audits to identify the physical characteristics of existing fiber plant from fiber matings, terminations, colors to splices and network elements while documenting and updating records. Performs testing utilizing OTDR's, Power Meter/Light Sources, OLTS and VFLs; interprets and analyzes data; identifies and troubleshoots problems. Reads, creates, and maintains accurate splicing schematics, records, and diagrams. Performs aerial construction activities, including but not limited to, installing aerial fiber, installing fiber storage (snowshoes), completing pole transfers, and performing necessary clean-up work. Performs underground construction activities, including but not limited to, pulling cable/fiber through conduits, digging up and repairing damaged conduit and underground vaults or pedestals. Pulls various types of cables, including, but not limited to fiber, coax, and copper in conduit. Performs traffic control flagging duties for roads and highways as needed. Ensures company assets are properly and continuously maintained in excellent operating condition while secured in a safe manner. Accurately completes progress forms, daily activity reports and all other documentation pertaining to work assignments. Surveys jobs sites while considering all safety measures to ensure a safe working environment for associates, general public and property. Oversees projects and delegates responsibilities to ensure safety, quality and productivity targets are met. Responsible for mentoring, training, directing and supervising associates while on job sites. Works closely with the Supervisor to plan, organize, coordinate and schedule projects. Qualifications At least 3-years of experience installing, maintaining/repairing, and testing fiber optic networks Valid driver's license and clean motor vehicle record Strong communication skills, both verbal and written Work indoors and outdoors as needed Able to be on call for emergencies involving damaged cable Organized with a strong attention to detail Day Shift (Required) Night Shift (Required) Overnight Shift (Required) Supplemental Pay: Bonus pay Education: High school or equivalent (Preferred) Experience: At least 3-years of experience installing, maintaining/repairing, and testing fiber optic networks Physical Requirements: Must be able to lift/carry 50 lbs regularly and up to 100 lbs as needed with or without assistance Must be able to work nights and weekends, if necessary Must be able to work in all weather conditions Opportunities: Long term employment Competitive wages Health insurance Dental insurance Vision insurance Paid Holidays and Vacation (PTO) Lots of room for growth We are looking forward to reading your application.

What you will do Under general supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of HVAC Automation Systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. Mentors technicians on building automation activities. Properly completes required service documentation. How you will do it Diagnoses and repairs complex electronic control system malfunction's requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in Johnson Controls software. Provides sketches of field changes and discrepancies for engineering corrections and drawings. Communicates with customer upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customer to become familiar with operating problems. Keeps customer informed on the nature of service provided outstanding issues and recommends system enhancements, upgrades, and or repairs. Promotes the sale of add-on work. Manages assigned work to meet professional execution, of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with service manager, customer agents, TTL's or subcontractors to coordinate activities as required in an ethical and professional manner. Adheres to all Johnson Controls and customer safety standards. Provides safety awareness on work sites. May provide training to customers on electronic control systems operations. Delivers manuals and documentation to the customer for training needs as required. Mentors and trains mechanical workforce on building automation systems. Provides support to the mechanical staff on non-complex, non-critical equipment. Conducts extensive self study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. What we look for Required Vocational School four year program or an Associate degree in electronics, mechanical systems, computer technology, air conditioning or similar field plus three years of industry experience or five years' experience in servicing electronic and/or mechanical systems in the HVAC industry. Generally required knowledge includes HVAC controls systems, facilities management systems, site preparation, peripheral equipment installation and servicing techniques. Effective interpersonal skills to properly represent Johnson Controls to customers and other outside contacts in an ethical and professional manner. Ability to explain technical information to technical and non-technical people. Leadership skills to support the activities of Mechanics working on non-complex, non-critical Building Automation equipment on a job site. PC experience required and the ability to program HVAC related software. Experience with Johnson Controls Equipment and Software is a must. Where legally permissible, if hired, candidate is required to be fully vaccinated against Covid-19 no later than his/her start date, unless candidate has a valid medical condition or sincerely held religious belief precluding he/she from receiving the vaccine. HIRING HOURLY RANGE: $32-41 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at *************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Who We Are We are a community built on care. Our caregivers and supporting staff extend compassion to those in need, helping to improve the health and well-being of those we serve, and provide comfort and healing. Your community is our community. Our Story We started out as a small operation in California. In May 1969, we acquired four hospitals, some additional care facilities and real estate for the future development of hospitals. Over the years, we've grown tremendously in size, scope and capability, building a home in new markets over time, and curating those homes to provide a compassionate environment for those entrusting us with their care. We have a rich history at Tenet. There are so many stories of compassionate care; so many "firsts" in terms of medical innovation; so many examples of enhancing healthcare delivery and shaping a business that is truly centered around patients and community need. Tenet and our predecessors have enabled us to touch many different elements of healthcare and make a difference in the lives of others. Our Impact Today Today, we are leading health system and services platform that continues to evolve in lockstep with community need. Tenet's operations include three businesses - our hospitals and physicians, USPI and Conifer Health Solutions. Our impact spreads far and deep with 65 hospitals and approximately 510 outpatient centers and additional sites of care. We are differentiated by our top notch medical specialists and service lines that are tailored within each community we serve. The work Conifer is doing will help provide the foundation for better health for clients across the country, through the delivery of healthcare-focused revenue cycle management and value-based care solutions. Together as an enterprise, we work to save lives and can accept nothing less than excellence from ourselves in service of our patients and their families, every day. Up to $20,000 Sign-On bonus based on experience San Ramon Regional Medical Center began serving residents of the San Ramon Valley and its surrounding communities in 1990. Located on a hillside overlooking the valley, we are a 123-bed, acute-care hospital, primary stroke center, and a cardiac heart surgery hospital. San Ramon Regional Medical Center provides comprehensive inpatient and outpatient services. Personalized service and a patient-centered philosophy are distinctive qualities of our facility. We offer competitive salaries and benefits including a matching 401(k), several health & dental plans to choose from, generous tuition assistance plans, and relocation assistance for select positions. Comprehensive benefits for medical, prescription drug, dental, vision, behavioral health and telemedicine services Wellbeing support, including employee assistance program (EAP) Time away from work programs for paid time off, long- and short-term plan coverage Savings and retirement including a 401(k) Plan with a 50% match up to 6% of pay, employee stock purchase plan, flexible spending accounts, retirement readiness tools, rollover support, and financial well-being counseling Education support through tuition assistance, student loan assistance, certification support, and online educational program Additional benefits life insurance, supplemental health protection plans, auto and home insurance, legal counseling, identity theft protection, and employee discount program Registered nurses - Retirement medical benefit account (RMBA) - 2% of annual eligible income set aside in accordance with program guidelines Benefits may vary by location and role Position Summary: As a senior member of the Diagnostic Imaging Department, this position produces clinical diagnostic radiographic images. Operates diagnostic imaging equipment, prepares room, equipment, supplies and medications. Provides leadership to Rad Tech II technologists or other staff as is needed. Provides patient care services using general and specialized imaging modalities under the direction of a physician but not requiring constant technical supervision. Provides diagnostic imaging services to patients of all ages. Applies ionizing radiation in the performance of a variety of technical procedures for radiological diagnosis. Responsible for patient care safety. Assists physicians in the performance of interventional procedures and the administration of contrast media. Assumes responsibility for designated procedures and equipment. Participates in orientation of Radiology Department staff. Works cooperatively with members of the health care team to maintain standards for professional Diagnostic Imaging Technologist practice in the clinical setting. Sign-on bonus doesn't apply to internal applicants Minimum Education: Graduate of an accredited radiology program Minimum Experience/Skills: Up to 1 year experience Licenses/Certificates/Credentials: Must possess and maintain throughout the duration of employment: Current Basic Life Support (BLS) certification for Healthcare Provider issued by the American Heart Association Current Certified Radiologic Technologist (CRT) license issued by the California Department of Public Health Current certification and registration with the American Registry of Radiologic Technologists (ARRT) Current Fluoroscopy Permit issued by the California Department of Public Health (or within 6 months of hire/ transfer) Venipuncture certification required, if applicable #LI-KB6 Tenet complies with federal, state, and/or local laws regarding mandatory vaccination of its workforce. If you are offered this position and must be vaccinated under any applicable law, you will be required to show proof of full vaccination or obtain an approval of a religious or medical exemption prior to your start date. If you receive an exemption from the vaccination requirement, you will be required to submit to regular testing in accordance with the law. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Tenet will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. Tenet participates in the E-Verify program. Follow the link below for additional information. E-Verify: ***************************** The employment practices of Tenet Healthcare and its companies comply with all applicable laws and regulations. ********** Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Tenet will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship.

**Onsite | Mountain View, CA** We are seeking a highly skilled Project Management Office (PMO) professional to lead transformation initiatives across core financial workstreams-Procure-to-Pay (P2P), Record-to-Report (R2R), and Quote-to-Cash (Q2C)-within a dynamic Technology Product organization. This role requires strong program management expertise and familiarity with financial systems. Experience with Oracle Financial Systems and tools such as Aravo and Third Party Risk Management (3PRM) is highly advantageous. Due to client requirement, applicants must be willing and able to work on a w2 basis. For our w2 consultants, we offer a great benefits package that includes Medical, Dental, and Vision benefits, 401k with company matching, and life insurance. Rate: $75 - $85 / hr. w2 Responsibilities: Project Leadership & Execution Lead and execute multiple financial systems workstreams. Partner with engineers, BSAs, and cross-functional stakeholders to ensure alignment with milestones and UAT readiness. Partner with overseas development center to ensure timelines and deliverables are met Serve as the PMO to the Group Product Leader -attending key meetings, preparing presentations, and maintaining deliverables. Interface with the business counterparts for dependencies, risks and impact Stakeholder Engagement Facilitate stakeholder meetings and communicate risks, issues, deliverables, and achievements to leadership. Translate requirements into actionable plans and ensure timely execution. Project Governance & Tracking Maintain and update project plans based on meeting outcomes. Document signoffs and decisions proactively. Monitor project health using RAG status (Red, Amber, Green) and escalate as needed. Testing & Quality Assurance Lead testing efforts across financial modules. Ensure proper configurations, testing and integrations are happening Create and manage detailed test cases and UAT scenarios. Reporting & Dashboards Build and maintain JIRA dashboards for visibility into testing, progress, and blockers. Provide ad hoc reporting and insights to leadership. Requirements: Experience: 7+ years in program/project management, preferably in financial systems transformation. Technical Knowledge: Strong understanding of Oracle Financial Systems; familiarity with tools like Aravo and 3PRM is a plus. Skills: Proven ability to manage complex, multi-workstream programs. Expertise in stakeholder management and cross-functional collaboration. Strong analytical and problem-solving skills. Proficiency in JIRA and project tracking tools. Education: Bachelor's degree in Business, Finance, Technology, or related field; PMP or similar certification preferred. Please be advised- If anyone reaches out to you about an open position connected with Eliassen Group, please confirm that they have an Eliassen.com email address and never provide personal or financial information to anyone who is not clearly associated with Eliassen Group. If you have any indication of fraudulent activity, please contact ********************. Skills, experience, and other compensable factors will be considered when determining pay rate. The pay range provided in this posting reflects a W2 hourly rate; other employment options may be available that may result in pay outside of the provided range. W2 employees of Eliassen Group who are regularly scheduled to work 30 or more hours per week are eligible for the following benefits: medical (choice of 3 plans), dental, vision, pre-tax accounts, other voluntary benefits including life and disability insurance, 401(k) with match, and sick time if required by law in the worked-in state/locality. JOB ID: JN -072025-103044

Insight Global is hiring a Maintenance Technician to join Cushman & Wakefield in their facilities management support to their end client in the San Francisco market. This is a 4-month contract opportunity with the possibility of extension or conversion to full-time employment - dependent on performance in the role and business needs. This position requires an onsite schedule, 5 days per week. The role involves performing general building maintenance and labor tasks as assigned by supervisors and Facility Managers (FMs), including loading, unloading, moving materials, and running errands for various projects. Responsibilities include supporting HVAC, Building Management Systems (BMS), Fire Life Safety Systems (FLSS), elevator operations, equipment repairs, and replacing or repairing door hardware, locks, and keys. The position also requires interior and exterior painting, with expertise in surface preparation and paint application on wood, metal, and drywall, as well as minor repairs to these surfaces. Additional duties include replacing light bulbs, lamps, and ballasts, and cleaning fixtures. The employee will escort third-party vendors to ensure work is completed correctly and in compliance with client safety and security standards. Prompt response to emergency situations and customer service requests is essential. The role demands adherence to all applicable codes, regulations, and company directives, as well as safe work practices. Proficiency in using technology such as smartphones, tablets, computers, web-based applications, and building automation systems is required. The employee must complete all scheduled safety trainings and comply with the company's uniform dress code, maintaining a neat appearance at all times. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices • Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine • Involves movement between departments, floors, and properties to facilitate work • Ability to speak clearly so others can understand you • Ability to read and understand information presented orally and in writing • Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics REQUIRED SKILLS AND EXPERIENCE - High school diploma or GED - 4+ years of experience in a commercial property setting - Strong communication and problem-solving skills - Computing skills in Excel, Work and Outlook - Must have a valid driver's license and positive driving record - Ability to meet physical demands NICE TO HAVE SKILLS AND EXPERIENCE - Technical, vocational or on-the-job training in at least one of the following areas: HVAC, electrical, mechanical, process controls, mechanical power transmissions, painting, plumbing, carpentry or engine repair