Service technician jobs in Odessa, TX

Company Profile BlueFin, a GATE Energy Company, is a leading independent service company with a suite of project execution niches and specialty equipment, covering a full range of pipeline and process, mechanical, intelligent completions, and fluid flushing and filtration services. Our clients range from Operators to General Contractors in the upstream and midstream market sectors of the oil and gas industry. This position is based in Odessa, Texas. Job Summary Serve as Lead Service Technician working in the Completion Services Department for land and offshore. Responsible for execution of tasks as assigned by the Lead Service Technician, Service Supervisor, Project Manager, or other Management. Is operationally qualified, verified, and authorized as required for specific tasks. May lead limited scope projects in the absence of a Lead Service Technician or Superior during a shift with prior approval from and/or under the direction of the Lead Service Technician or Superior. Specific job tasks would include but not be limited to Installation and/or retrieval of Permanent Gauge Systems, Control Line, TEC & Flatpack, Fiber Optics, Chemical Injection Systems, Gas Lift Mandrels & Valves. The Lead Service Technician will conduct all activities in an accountable, respectful, and professional manner at all times and fully support the completion of work in accordance with BlueFin quality and safety standards. Essential Duties and Responsibilities Travel through United States and Gulf of Mexico; staying overnight for extended periods. Proven ability to lead and supervise a field work crew in the task at hand. Communicate effectively with co-workers both office and field related. Good written and verbal communication skills. Ability to train and develop Service Technicians. Direct and perform field services as directed and in accordance with work plan, procedures and/or SOP, and ability to distinguish the work at hand from the work plan/procedure and how to proceed while making field decisions to drive the project. Knowledge and proven ability to operate equipment utilized in Completion Services and to train employees on such equipment. Service, maintain, repair, and test equipment/ tools for pre/post jobs or as instructed in shop. Write or participate in writing JSA's for job task assigned. Load/ unload equipment when required. Learn all field services work and equipment in order to gain skills/knowledge. Increase knowledge and participate in training on other product lines and services. Participation and Compliance with BlueFin HSE and Quality Management System. Comply with all company policies (Safety, quality, general, SOP's, etc). Available 24-hour call (except for scheduled vacation). Have reliable means of transportation to and from BlueFin office. Experience and Education High School Diploma or GED. Preferred 5-10 years of Completions experience. Must hold or ability to obtain Certificates for Marine Trash & Debris, Huet, Water survival, Safe Land/Safe Gulf, Fall Protection, Incipient Fire and Rigging at a minimum. Physical Requirements Must pass required Fit for Duty Exam Ability to drive for extended periods of time. Able to perform demanding physical labor in harsh environments on land and offshore. Bluefin is an Equal Opportunity Employer.

Reinvigorate your career with an organization that values teamwork, expertise, and integrity. We're looking for an experienced Lead Valve Services Technician to join our growing team and take a leadership role in managing valve service operations, customer relationships, and business growth opportunities. This position is ideal for someone with hands-on relief valve experience, strong organizational and communication skills, and a passion for delivering top-quality service in the oil and gas industry. Who we are: At the Crimson Group, we provide our clients with high-value automation, instrumentation, electrical design, and process operation solutions. With the capabilities of a large enterprise, and the agility and responsiveness of a small company, we are a customer-focused provider of automation and integrated solutions. Crimson Group provides total integration of design, project management, panel manufacturing, installation/commissioning, maintenance, and repair for North America and select international markets. What we Offer: Competitive hourly compensation. Comprehensive benefit package and 401k plan. A company laptop and cell phone reimbursement. An environment of continuous learning with the opportunity to enhance your skills & experience and grow within the organization. The opportunity to participate in charitable events through our charity, RedTail Community Foundation. What you will be Doing: Oversee and execute valve testing, inspection, repair, and maintenance activities. Assist with scheduling, resource allocation, and service documentation for multiple client projects. Develop and maintain strong client relationships to ensure satisfaction and repeat business. Lead, mentor, and support valve technicians in the field and shop, ensuring safety and quality standards are upheld. Perform or supervise testing and calibration of relief valves to meet company and safety standards. Assist in troubleshooting and problem-solving of complex valve issues. Track project progress, costs, and customer requirements to ensure timely delivery. Collaborate with operations, sales, and management to identify growth opportunities in valve services. Support business development by identifying client needs and assisting with proposal or quote preparation. Maintain detailed records of work performed, certifications, and compliance documentation. Your Skills and Qualifications: 3-5+ years of hands-on experience with relief valves, safety valves, and related pressure control equipment. Previous experience in a lead technician, coordinator, or supervisory role. Proven customer service and account management skills with the ability to build trust and long-term relationships. Excellent leadership, communication, and organizational skills. Proficiency with scheduling tools, maintenance tracking systems, and Microsoft Office Suite. Ability to manage competing priorities and meet deadlines in a fast-paced service environment. A valid driver's license and willingness to travel occasionally to client sites. Technical training or certification in mechanical, instrumentation, or valve technology. Background in oil & gas, industrial maintenance, or manufacturing. Safety-conscious, reliable, and proactive approach to problem-solving. A results-driven mindset with a focus on quality, customer satisfaction, and continuous improvement. **As part of our commitment to maintaining a safe and professional work environment, the Crimson Group of Companies conducts comprehensive background checks and drug and alcohol testing on all prospective employees as part of the final offer process. These checks are intended to verify the accuracy of information provided by candidates and assess any potential risks to the company or its employees. All offers of employment are contingent upon the successful completion of these background checks.** Please note: We do not accept phone calls regarding job opportunities. To ensure fairness and consistency in our hiring process, all candidates must follow the application instructions outlined in the posting. Thank you for your understanding.

Perform complete over-haul and testing of all manufacturers control valves, actuators and positioners to include: Fisher, Masoneilan, Rotork, Automax, and others. Execute diagnostics and trouble-shooting in shop and field environments. Directly reports to the Operations Manager. Essential Job Functions Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern. Performs all duties as assigned and adheres to TEAM's Core Values. Perform control valve repair in accordance to TEAM's quality procedures. Directly communicate with customers. Work autonomously in valve repair process. Ensure all diagnostic, testing, and repair reports are in compliance with quality system. Job Qualifications Education preferred: high school diploma or GED equivalent. Minimum 3- 5 years of experience. Control Valve Manufacturers Training Courses and/or certifications preferred. Knowledge of HART Communicator or other diagnostic analyzer manufacturer required. 0 to 30% minimum travel requirement. Work Conditions Position is based out of a branch or site location. Field duties require indoor and outdoor work in a plant atmosphere. Interaction with other crew employees, as well as supervisors and client personnel. Working in plant and/or shop areas around production machinery with extreme noise levels. Must be able to wear safety equipment as required by the safety department for personal protection. May be at more than one job site in a day and must be able to tolerate climate changes. May be required to travel out of town on a periodic basis Physical and Mental Requirements Ability to lift and carry 75 pounds. Must be able to walk and climb except when performing non-field duties. Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations. Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties. Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations. Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells. Ability to maintain focus and multitask effectively. Excellent communication skills. TEAM provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Who We Are Kirby-Smith Machinery, Inc. is a leading distributor of heavy equipment and cranes in the central United States. We are at the forefront of today's construction industry growth and have several exciting job opportunities for talented, energized professionals across the region who want to join our #WeAre1KirbySmith family! Heavy Equipment Shop Service Technician/Mechanic Benefits Above-Average Industry Pay Comprehensive Benefits Package (including Medical/Dental/Vision) 401K Plans with Company Match Generous PTO Package/Paid Holidays Short/Long Term Disability Growth Opportunities Paid Training Family-Owned and Operated Health and Wellness Heavy Equipment Shop Service Technician/Mechanic Specific Benefits Relocation assistance is available for qualified candidates Uniforms Provided Steel/Composite Safety Toed Boots provided Highly productive shop Career advancement opportunities, promoted from within Continued education, manufacturer hands-on and web-based training Clean and professional work environment Apprenticeship Program Competitive Wages Company-paid Accident Insurance Heavy Equipment Shop Service Technician/Mechanic Position Purpose Responsible for performing quality work on various brands as effectively and profitably as possible. This includes diagnosing, parts ordering, technical report writing, maintaining care of company assets, and proper communication with others. Heavy Equipment Shop Service Technician/Mechanic Essential Functions Communicates and supports the Kirby Smith vision and core values of One Mission, One Team, One Plan, One Goal Performs Shop repairs and maintenance with little or no direct supervision Diagnoses and evaluates problems with equipment; makes repairs using established guidelines following established flat rates Plans methods and sequence of performing assigned repairs Notifies the Manager of any additional work required on the unit Models safe work habits and always abides by company safety policies and procedures Keeps rework within established guidelines Organizes, cleans, and maintains a safe work area Contributes to departmental and product line goals Completes required paperwork efficiently and timely Attends factory and other training as specified by supervisor Ensures that the shop equipment remains in optimal working order and is consistently maintained in a clean state Exhibits professional demeanor with customers, managers, and colleagues Promotes goodwill with customers and exhibits excellent customer relation behaviors Consistent and reliable on-site attendance Performs other job-related duties as assigned Heavy Equipment Shop Service Technician/Mechanic Minimum Qualifications High School Diploma or Equivalent Two (2) years of experience in diagnosing and repairing construction equipment Ability to read complex hydraulic and electrical schematics Furnish and maintain a set of hand tools and any special tools required by the company Ability to occasionally work overtime, stay overnight, and work on weekends when needed Maintain valid driver's license; CDL if required Heavy Equipment Shop Service Technician/Mechanic Physical Requirements: Pushing/Pulling/Lifting/Carrying up to 100 pounds without assistance Physical ability to squat, twist, turn, bend, stoop, climb, and reach overhead Must be able to work in extreme heat or cold and wet, damp, dusty, or windy conditions and tolerate exposure to typical noises, hazardous materials, and fumes/odors associated with the shop Physical ability to perform maintenance on equipment for extended hours with continual mounting and dismounting throughout the workday Ability to adhere to personal protective equipment (PPE) policy and maintain individual PPE in a functional condition This is considered a Safety-Sensitive position. We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Details Midland, TX Full TimeJob Posting Date(s) 12/03/2025Description At PPV, an MCE Company, we're growing - and we're hiring a Valve Technician to help us grow even further! Performs maintenance, repair, and testing of various valves including relief valves, control valves, tank vents, etc. Essential duties Follow safety and quality procedures Cleaning, blasting, and painting of various valve components Operate equipment blaster, parts washer, torch, forklift, and other related equipment Performs re-machining or lapping of critical parts Perform field work as needed Qualifications Required skills/abilities Must be able to read measuring devices Must be able to document and enter job data Strong mechanical aptitude Demonstrate problem-solving skills Physical requirements The physical requirements for this position are typical for a mobile employee including constant movement within a wide range of office environments, climbing, standing, reaching, bending, kneeling, stooping and lifting 50+ pounds. Benefits Along with competitive compensation and career advancement opportunities, we offer a comprehensive total rewards package. Qualifying employees receive: Medical, dental, and vision coverage Company-paid life and AD&D coverage Company-paid short- and long-term disability coverage Voluntary benefit products 401(k) retirement savings plan with a generous company match Generous PTO allowances and paid holidays Tuition reimbursement Employee Assistance Program (EAP) Parental Leave Who we are: Motion & Control Enterprises (MCE) provides custom, innovative solutions for automation, engineered systems, fluid power, compressed air, flow control, lubrication, and instrumentation challenges. Motion & Control Enterprise, LLC. is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

This position performs on-site work in the assembly, maintenance, testing and inspection of manual and/or hydraulic valves utilized in Oil & Gas fracturing operations. Travels to remote client worksites to perform service on equipment. Possesses strong technical skills to troubleshoot and resolve problems without any direct supervision. Essential Duties & Responsibilities Understands and follows all HR, HSE and Quality Management Policies. Attends and engages in all OJT led by a Shop Technician II, III or Supervisor, and any other available training that is required to perform job successfully. Responsible for frac stack lubrication that meets manufacturer's specifications before equipment is deployed into production environments. Rebuilds valves Catalogs replacement parts in/out of valves per API standards Creates damage sheets for rebills to customer Inventories valve parts. Repairs frac vales on client work sites. Assists in all facets of equipment maintenance, preparation, testing and appearance as directed and as specific to Flowback operations. Responsible for maintenance and operation of the support equipment necessary to prepare the pressure equipment for storage or job prep. (Steam Cleaner, Forklift, Crane, Pressure Test Unit, Torque Units, Paint Booth Apparatus). Keeps working area and facility in an organized and neat condition. Available to workdays and times necessary to complete required work. May be required to perform other related duties as assigned. Requirements Physical & Safety Requirements Requires operation of heavy equipment. Requires employee to stand for up to 100% of the time. Requires employees to climb ladders or stairs to inspect, repair, and paint equipment. Must be able to lift and/or move 80 - 95 pounds. High noise environment (>85dbA) will occur with ear protection. This position requires working in outdoor Shop environment consisting of wet, and/or humid conditions as well as extreme heat and extreme cold. Requires employees to climb heights of at least 10 feet moving and maintaining self in different positions-stoop, kneel, crouch and crawl to accomplish tasks in various environments including tight and small spaces. Must wear all required PPE, including fire-retardant clothing, hard hats, face shields, hearing protection, safety glasses, and steel-toed boots. Specific vision abilities required by this job include close vision, distance vision, color vision, and ability to adjust focus. Skills and Abilities Perform pressure testing utilizing certified test equipment and complete all QA/ QC documentation as required by the QHSE program (if skilled). Perform hands-on workshop and/ or on-site disassembly, inspection, reporting, cleaning, and reassembly of valves and actuators and other equipment. Machine material and/ or parts with various machining equipment. Ensure work and used materials follow manufacturer specifications. Read and interpret schematics for assembly, repair, and reassembly as required including completion of applicable quality documentation in either paper or electronic form. Perform failure assessments and make recommendations to the on-site supervisor as required. Perform day-to-day and routine safety observations and inspections Must pay attention to detail. Ability to read, write and communicate effectively. Skilled in the use of overhead crane and forklift equipment. Must be able to work with little to no supervision, executing work based on established expectations. Ability to follow proper protocol for incident reporting and emergency situations. Ability to understand and follow protocol with Stop Work Authority Ability to identify top priorities in a high-volume multitask work environment and the ability to determine critical few and know when to communicate issues and escalate them for decision-making. Must be mechanically inclined. Able to withstand the mental and physical stress brought in by the element of an outdoor work environment. Behavioral Competencies Must have attention to detail. Possess effective communication skills. Able to follow proper protocol for incident reporting and emergency situations. Good moral character and team player attitude. Must be safety conscious. Dedication & commitment to team focus common goals. Able to be flexible and adaptable to the ever-changing needs of clients and industry. Able to withstand the mental and physical stress brought in by the element of an outdoor work environment. Fosters a positive working relationship with co-workers, customers, clients and management. Maintain an “above approach” lifestyle that reflects the company's values. Teamwork. Caring. Integrity. Work Ethic. Required Education & Experience At least 1-year recent, practical experience with Flowback equipment. High school diploma or GED preferred. Training Requirements PEC/SafeLand. Smith Driving Instruction. Forklift Arial Lift Fall protection Additional training to be assigned as needed Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Must pass pre-employment drug tests and maintain client required random drug tests. Must have a valid driver's license and clean driving record to be cleared to operate motor vehicles. Must pass a background investigation. EEO Statement One X provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law.

TEAM UP WITH US! The Technical Communicator II is responsible for providing internal and external customers with technical assistance. DO YOU HAVE WHAT IT TAKES? WHAT YOU'LL DO: * Assist technicians on assignments through the repair process to ensure timely, cost effective and quality repairs are being completed. * Coordinate and work with Caterpillar engineers in resolving product issues. * Answer technical requests and inquiries to resolve product problems through diagnosis, personal knowledge and expertise, research, manufacturing contacts and engineering data. * Recognize, document and report product issues and assist in determining root cause that significantly affect customer satisfaction, productivity and/or operations. * Travels to customer sites within assigned region to assist in complex troubleshooting and ongoing issues to gain a better understanding of the specific repair and establish improvements in the repair process. * Attends necessary training in order to stay up to date on new products and challenges. * Utilizes Caterpillar system resources, such as SIS web, Product Support CRM (PSCRM), Dealer.Cat.com, Dealer Product Support Search (DPSS), Service Information Management System (SIMS I) /Continuous Product Improvement (CPI), to diagnose issues and evaluate possible solutions. * Proficient in using professional phone etiquette to field customer calls. WHAT YOU'LL NEED: * Associate's degree (A. A.) or equivalent from two-year college or technical school; or five (5) year related experience and/or training; or equivalent combination of education and experience. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Moderate computer skills. Familiar with web navigation, experience working with databases. * Must have valid drivers license and clean driving record. * Ability to write routine reports and correspondence. * Ability to speak effectively before groups of customers or employees of organization. * Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. * Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. WHY WORK WITH US? * We like to take care of business and have fun doing it! * We offer health, dental, vision, life, and more as a comprehensive benefits package. * Don't you want to work with awesome people? IMPORTANT INFORMATION: While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; outside weather conditions and vibration. The noise level in the work environment is usually moderate. Required travel up to 20%. This position is considered a safety sensitive position. The Job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA

INDUSTRY: Equipment Rentals, Oil & Gas CONTEXT: We are seeking skilled Generator Technicians to repair and service MQ Power generators, as well as other major brands. Candidates with generator experience across multiple manufacturers are encouraged to apply. While there is no minimum years of experience required, managerial-level expertise will be highly valued. The ideal candidate will possess a strong technical background, including knowledge of controls, reprogramming, electrical circuits, and megger testing. A solid work ethic, problem-solving skills, and the ability to work independently are essential. RESPONSIBILITIES: Diagnose, repair, and maintain MQ Power generators and other generator brands. Troubleshoot and reprogram generator control systems. Inspect, test, and repair electrical circuits and related components. Perform megger testing to ensure electrical insulation integrity. Maintain detailed service records and follow company procedures. Support team members and provide leadership if in a senior role. QUALIFICATIONS: Generator repair/service experience (any brand). Strong technical skills in controls, reprogramming, and electrical circuits. Experience with megger testing preferred. Managerial or leadership experience is a plus. Reliable, self-motivated, and safety-focused.

Main Duties & Responsibilities Primary Job Role Conducts all assigned work in a safe manner, adhering to all applicable safety, environmental and contamination control policies, procedures and regulations. Wears proper personal protective equipment. Attends and successfully completes required technician training classes. Maintains necessary set of tools required for job performance to diagnose, disassemble and assemble components to manufacturer's specifications. Diagnose and perform designated repairs on customer or company owned equipment including, but not limited to, mechanical, electrical, hydraulic troubleshooting, maintenance and repairs. Works in a neat and orderly fashion, constantly looking for ways of improving the methods of work, work area, and safety standards. Inspects components to insure maximum parts are being reused to control repair costs. Completes required documentation utilizing appropriate software to document repairs performed on equipment, and accounting for repair times. Monitors job expenses versus repair estimates and ensures that the supervisor is aware of any cost over run, prior to the job being completed. Approaches work in a positive manner, maintains conduct that is supportive of the work Team and sets the standard for others to follow. Contributes to Team efforts by accomplishing tasks on time while maintaining safety and quality expectations. Trains and/or mentors others in department. Assumes Supervisors positon temporarily, as necessary. Performs other duties as assigned. Essential Job Competencies Safety: fully supports, encourages and follows safe work behavior, and considers safety of paramount importance in the workplace. Job Specific Skills: Demonstrates the required depth and mastery of knowledge and skill associated with the job as identified in the Learning Management System (LMS) and other applicable sources. Demonstrates the effective application of the job specific knowledge, skills and ability required to resolve job related challenges in the workplace. Refer to job specific training requirements for the job identified in the LMS. Communication: Uses active listening skills, conveying information with the appropriate medium that is clear and easily understood. Uses feedback to verify effective and accurate communication has occurred. Ensures that others having a need to know are kept informed about developments, progress, problems and plans through consistent, effective communication. Avoids surprises. Information Gathering: Checks all appropriate sources in identifying the information needed for analysis and decision making. Uses skillful methods in obtaining high quality relevant information. Checks work to ensure accuracy and completeness. Compares observations or finished work to what is expected to find inconsistencies. Clearly documents sources, and organizes the information according to the research needs. Takes Initiative: Takes appropriate action to resolve issues without requiring direction. Seeks out others involved in a situation to learn their perspectives. Makes difficult decisions in a timely manner. Is willing to make decisions in difficult or ambiguous situations, when time is critical. Assertive in a group when it is necessary to facilitate change, overcome an impasse, face issues, or ensure that decisions are made. Results Oriented: Has a strong sense of urgency and commitment to achieve desired results in the face of obstacles and frustrations. Remains focused, does not get bogged down in unnecessary detail. Identifies and utilizes the most efficient methods to successfully achieve tasks on time despite unforeseen events. Driven, maintains a sense of urgency and adjusts schedules as needed to achieve without sacrificing quality of work. Adaptability: Adapts to changing business needs, conditions, and work responsibilities. Adapts approach, goals, and methods to achieve solutions and results in dynamic situations. Recovers quickly from setbacks, and finds alternative ways to reach goals or targets. Open to different and new ways of doing things; willing to modify one's preferred way of doing things. Credibility: Demonstrated concern to be responsible, reliable, and trustworthy. Maintains commitments. Respects the confidentiality of information or concerns shared by others. Is honest and forthright with people. Takes personal responsibility for the quality and timeliness of work. Punctual, follows instructions, policies, and procedures. Personal Development: Takes responsibility for personal learning and development by acquiring and refining technical and professional skills needed in job related areas. Obtains developmental opportunities proactively. Actively seeks and embraces growth opportunities. Company Overview In 1962, Ring Power Corporation became a full-line Caterpillar dealer in North Florida, and later expanded its authorized territory to include Central Florida. Today, Ring Power Corporate headquarters in St. Augustine oversees the operations of 18 branch locations throughout the state of Florida, including large regional facilities in Tampa and Orlando and crane and forklift sales and service facilities in Pompano. Ring Power also has eight facilities outside of Florida - The Carolinas, Georgia, Texas & Tennessee- to serve the needs of other specialized industries and customers. Ring Power Corporation has become one of the largest Caterpillar dealers in the Southeastern United States through dedication to the mission of customer service. In order to preserve the "Customers First" reputation that Ring Power was built on, we continually train our employees and work closely with our customers to assure complete satisfaction, especially after the sale. Currently, more than 2,300 employees at 20+ locations throughout Florida and the United States work hard to provide the highest quality construction equipment, backed by responsive, professional service and support at every level Qualifications Education and Experience Formal Education High School diploma or GED Experience 5-6 years Required / Credentials Completed all required training curriculum to be designated a Tech I. Able to easily and effectively comprehend written material and communicate orally and in writing with employees and customers. Not Required but Highly Desired Criteria Proficient in the use of a computer, Microsoft Office products and relevant Dealer software programs. Successfully completed relevant specialized equipment technical courses. Updating of Knowledge Job requirements frequently change requiring re-training once or more per year. Responsibility for Change, Innovation, Overall Improvement, and/or Effectiveness Problem Solving Job requires complex problem solving skills in a dynamic environment. Independent research and analysis are routinely required to develop appropriate solutions. Awareness and intervention is expected to prevent problems from occurring. Creativity Job requires creativity as part of carrying out daily activities. New approaches are encouraged. Autonomy Job is not normally monitored, but overall objectives are clearly defined. Use of discretion in how the work is done, setting priorities and decision making is encouraged. More emphasis is placed on achieving the desired outcome, not on controlling the process. Working Environment Stress Load Occasional exposure to these stresses (less than 20% of the time). Workload Fluctuation Job frequently involves changes in priorities, complexity and/or quantity of work. Work Schedule Work is scheduled during regular business hours with frequent requirements to work nights, holidays and weekends. Organizational Impact A person's performance in this job has considerable immediate impact on expense, efficiencies or achievement of overall department objectives. Supervisory Responsibility Job has no subordinates / no supervisory responsibility (may work independently or as a member of a team) Physical Demands · "NA": Not Applicable · "O": Occasionally - (up to 3 hours/day) · "F": Frequently - (3-6 hours/day) · "C": Constantly - (6-8 hours/day) F: Climbing O: Balancing O: Stooping F: Kneeling F: Crouching F: Crawling F: Reaching C: Standing F: Sitting F: Walking O: Feeling F: Fingering F: Grasping F: Repetitive Motion C: Talking C: Hearing F: Pushing - Up to 25 lbs. F: Pulling - Up to 25 lbs. F: Lifting - Up to 25 lbs. O: Pushing - 26-50 lbs O: Pulling - 26-50 lbs. O: Lifting - 26-50 lbs. O: Pushing - Over 50 lbs. O: Pulling - Over 50 lbs. O: Lifting - Over 50 lbs. Environmental Conditions · "NA": Not Applicable · "O": Occasionally - (up to 3 hours/day) · "F": Frequently - (3-6 hours/day) · "C": Constantly - (6-8 hours/day) C: Inside conditions: Protection from weather but not necessarily from temperature change. O: Outside environmental conditions: No effective protection from weather. O: Extreme cold: Temperatures below 32 degrees for periods of more than one hour. F: Extreme heat: Temperatures above 100 degrees for periods of more than one hour. F: Noise: sufficient noise to cause the worker to shout to be heard above the ambient noise level F: Vibration: Exposure to oscillating movements of the extremities of whole body. F: Hazards: Includes a variety of physical conditions (i.e. proximity to moving mechanical parts, electrical current, working in high places, exposure to heat and/or chemicals. F: Atmospheric conditions: One or more of the following conditions that affect the respiratory system or the skin: Fumes, odors, dust, mists, gases or poor ventilation. F: Oils: There is air and/or skin exposure to oils and other cutting fluids. O: Air particulates / contaminants: the worker is required to wear respirator. RING POWER CORPORATION, INC. IS AN EQUAL OPPORTUNITY EMPLOYER Not ready to apply? Connect with us for general consideration.

This Utility Technician will provide support across various operations while gaining hands-on experience in pipeline operation and maintenance tasks. The Utility Technician will work closely with senior and experienced personnel to learn proper procedures, safety practices, and the day-to-day operations of our natural gas pipeline assets. The Pipeline Utility Position Program aims to provide employees with targeted training and hands-on experience to advance through a career path that prepares them for various roles in pipeline operations. Employees will gain exposure to specialized roles, including Damage Prevention Technician, Pipeline Technician, Turbine Technician, Measurement Technician, Corrosion Technician, and I/E Technician. The program follows a structured timeline, progressing over 24 months from an entry Level 1 to Level 3 position, with each phase emphasizing specific training for technical expertise. This is a full-time permanent position. Responsibilities: Learn to safely operate and care for a variety of tools, equipment, and vehicles used in daily operations. Assist in inventory and restocking of supplies and materials. Observe and follow all company safety rules and procedures, and wear required protective equipment. Participate in training sessions and safety meetings to gain knowledge of operations and procedures. Assist with performing Startup, Shutdown, and operation of various equipment/systems Assist with damage prevention activities including pipeline patrols, one-calls, locating and marking underground utilities, and inspecting line crossings, excavations, and other activities affecting Company facilities as required. Conducts routine inspection and operation of all equipment and pipelines. Responds to alarms and problems within the pipeline system and makes appropriate corrections. Conducts routine inspection of equipment and facilities. Performs or assists with a variety of Mechanical Maintenance and Repair duties. Assists with routine inspection, calibration and repair of end devices such as transmitters, switches, fire eyes, hazardous gas detection, level detection, loop tuning, etc. Assists with maintenance and repair mechanical equipment, instrumentation and electrical (I&E) equipment, and other equipment including, but not limited to valves, valve actuators, positioners, transmitters, motors, and compressors. Product composition and quality sampling and testing. Accurately complete documentation such as; timesheets, UpKeep work orders, and Job Safety Analysis. Support in basic facility upkeep tasks, such as cleaning, organizing tools, and preparing work areas. Effectively utilizes tools and tests equipment as needed. Performs and accurately documents regulatory required inspections. May oversee contractors providing specialty services (Quality Assurance, Quality Control). Reads and comprehends technical procedures, and / or governmental regulations Occasional travel including nights and weekends, as needed. Performs other related duties to meet the ongoing needs of the organization. Required Qualifications: Legally authorized to work in the United States without restrictions. High School Diploma or GED required. Associates degree in a technical field and/or at least 3 years equivalent work, preferred. Work experience in plant or pipeline operations, mechanical maintenance, I&E, or natural gas measurement, preferred. Ability to utilize Microsoft Office Suite tools. Valid Driver's License and acceptable driving record. Willing and able to work shift schedule. Willing and able to perform/comply with the following, with or without reasonable accommodation: Work overtime, nights, weekends, holidays, and varied shifts when required. Occasional overnight travel may be required. Be available for call-outs when needed. Work in loud environment. Regularly stoops, squats, kneels and crouches for durations up to 3 minutes. Periodically pulls/pushes doors open to move around the gas plant. Lift a minimum of 50 pounds. Occasionally exerts pulling force of 130 pounds. Occasionally may climb A-frame ladders. Benefits: This position is located in Midland/Odessa, Texas area. Selected candidate is eligible for employer matched 401(k), medical, dental, vision, basic life and AD&D insurances and other benefit offerings.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, American Heart Association, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning 11,000 strong organization as we fuel the world and each other! Summary: The primary responsibility for the Equipment Technician position is collecting, analyzing, and reporting the health of rotating equipment based on multiple technologies including vibration, thermography, oil analysis, pump and motor performance, compressor and engine performance and key operating parameters. This position works closely with operations, engineers, specialists, and maintenance personnel in troubleshooting and repairs. This position will provide support for multiple sites. Essential duties and responsibilities: To perform this job successfully, an individual must be able to perform each essential job duties satisfactorily. The requirements for this position are listed below: * Develop and maintain vibration analysis program. Establish equipment routes and frequency. Collect and enter equipment data necessary for proper vibration analysis. * Proficient with rotating and/or reciprocating equipment analysis techniques and perform as required * Proficient with motor and/or engine analysis techniques and perform as required * Develop and maintain lube oil analysis program establishing routes and frequency * Periodic (monthly, quarterly, etc.) data acquisition from equipment, including vibration data with portable systems, critical machinery performance metrics (flow rates, equipment rotating speed, temperatures, and process flow characteristics) and lube oil samples and analysis * Perform analysis of data to resolve or proactively anticipate equipment failures * Lead and/or assist in root cause failure analysis utilizing the TapRoot process * Implements continuous monitoring systems, such as alarm, report, and acceptance regions * Coordinate scheduling of repairs by taking ownership of notifications and corresponding follow-up * Monitor equipment repairs in the field and at vendor shops * Report equipment deficiencies in SAP system making recommendations for corrective action * Collaborate with responsible Maintenance/Reliability Specialist, engineers, planners, Operations Managers and supervisors to ensure proper priorities are placed on deficiencies and continuous learning/improvement process is fostered * Support the lubrication program by monitoring its effectiveness or, when required, take samples, interpret analysis and take corrective actions Required education: * High School Diploma or GED * Required experience is commensurate with the selected job level: * Level C requires a minimum of 0-2 years of relevant experience in an oil and gas operations role or equivalent work experience * Level B requires a minimum of 2-4 years of relevant experience in an oil and gas operations role or equivalent work experience * Level A requires a minimum of 4+ years of relevant experience in an oil and gas operations role or equivalent work experience Preferred Qualifications: Solid troubleshooting skills and ability to interpret and analyze data Strong computer skills with experience in Microsoft Office suite. Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment * Frequent heavy lifting with and without assistance * Work on and around equipment and facilities that require knowledge of and adherence to safe work procedures and practices * Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays * Reliable attendance at work * Occasional overnight travel may be required

About the Company Our organization is dedicated to upholding strong core values and leading the dewatering and groundwater management industry through continuous improvement and innovation. We take pride in partnering closely with clients to understand their unique needs and provide engineered, cost-effective, and high-quality solutions delivered safely and efficiently. Our success is built on the expertise and dedication of our team - professionals who are empowered, knowledgeable, and committed to excellence. We value long-term relationships with our clients and stakeholders, founded on integrity, respect, and performance, which serve as the cornerstone for every project we undertake. Job Summary We are seeking a Pump Mechanic / Equipment Technician to perform hands-on maintenance, troubleshooting, and repair work on pumping and related mechanical systems. Key Responsibilities Perform routine maintenance, cleaning, and lubrication on equipment and vehicles. Disassemble and reassemble pump systems using hand tools and lifting equipment. Operate and inspect rental or branch equipment to identify issues or mechanical defects. Overhaul, rebuild, and test equipment to ensure reliable operation and efficiency. Examine mechanical components for wear or damage, and repair or replace as necessary. Troubleshoot and repair electrical and control systems related to pumping equipment. Conduct performance testing after repairs to confirm proper functionality and compliance with specifications. Perform light fabrication and welding tasks when needed. Order, track, and maintain inventory of parts and service materials. Maintain accurate records of maintenance and repair activities. Keep the work area clean, organized, and compliant with safety standards. Follow all safety procedures and company policies. Perform additional duties as assigned by management. Qualifications Minimum of 2 years of relevant mechanical or equipment service experience required. Experience with diesel engines, pumps, and pipeline or fluid-handling equipment preferred. Familiarity with diagnostic and service software for industrial or diesel equipment a plus. Ability to work independently and troubleshoot complex mechanical systems. Strong attention to detail and commitment to quality workmanship. Excellent communication and interpersonal skills. Customer service-oriented with the ability to represent the company professionally. Strong organizational and multitasking abilities. Positive attitude and willingness to learn.

NATURAL GAS PROCESSING TECHNICIAN Responsible to: GAS DECOMPRESSION SUPERVISOR This position is responsible for the day-to-day operations and maintenance of natural gas treating and processing equipment including refrigeration, compression, and dehydration. Equipment includes but is not limited to mobile refrigeration units, reciprocating natural gas compressors, dehydrators, fluid separation equipment, vales, gas measurement equipment, etc. Essential Duties and Responsibilities: * Act as lead regarding all field gas activities. * Extensive experience working with PRS/MRU/Dehydration systems. * Provide daily oversight including- Operating equipment per operating ranges, inspecting equipment periodically to detect malfunctions or need for repair, and performing minor maintenance on equipment. * Must be willing to develop a working knowledge of fleet equipment. * Ability to troubleshoot and work through problems efficiently. * Read, monitor, and record various operating conditions such as pressure, temperature, hours of operations, fuel consumed, water levels, etc. * De-pressure equipment. * Responsible for calculating, designing, and ensuring proper flows, temperatures, and pressure levels. * Moderate use of hand tools to work with and repair mechanical and electrical equipment. * Mechanically inclined * Understanding of simple electronics and electrical equipment is beneficial. * Will be required to complete all training including Flash Arc Training and Basic Electrical Safety Training as provided. * Must properly use ladders and safety harnesses. * Must be able to determine appropriate level of personal protective equipment (PPE) needed for the specific assigned task. * Must possess the ability to self-supervise on daily tasks and metrics. * Ability to work with a team and standalone for multiple hours. * Must present equipment, tools, and self in an orderly and tidy manner. * Be available by phone while on scheduled rotation. * Able to operate a company vehicle in a safe manner as well as maintain a clean driving record. * Comply with all safety standards and procedures. * Oversee safety and environmental requirements while operating equipment onsite along with assisting with incident response and investigations as needed. * On time completion of all assigned training * Promotes ethical behavior in all aspects of the business and lead by example. * Computer literate with the ability to utilize online forms/automation. * All other duties and responsibilities as assigned by Supervisor. Other Requirements: * Minimum 7+ years related experience, preferably in the oil and gas industry, rental, or electrical industry. * Extensive experience working with PRS/MRU/Dehydration systems. * Understanding of electronics, electrical equipment, and electrical safety. * Must properly use ladders and safety harnesses. * Able to operate a company vehicle in a safe manner as well as maintain a clean driving record. * High School diploma, skilled labor certificate, or equivalent. * Willingness to work in exposure to extreme temperatures, wind, and precipitation, in addition to working at heights. * Ability to stoop, sit, stand, or be on their feet for extended periods of time. * Able to lift 25 pounds up to 10 times per shift. * Valid Driver's License. * Good written and verbal communication skills. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. VoltaGrid is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, and general treatment during employment. #LI-DNP

NATURAL GAS PROCESSING TECHNICIAN FLSA Class: NON-EXEMPT Responsible to: GAS DECOMPRESSION SUPERVISOR This position is responsible for the day-to-day operations and maintenance of natural gas treating and processing equipment including refrigeration, compression, and dehydration. Equipment includes but is not limited to mobile refrigeration units, reciprocating natural gas compressors, dehydrators, fluid separation equipment, vales, gas measurement equipment, etc. Essential Duties and Responsibilities: Act as lead regarding all field gas activities. Extensive experience working with PRS/MRU/Dehydration systems. Provide daily oversight including- Operating equipment per operating ranges, inspecting equipment periodically to detect malfunctions or need for repair, and performing minor maintenance on equipment. Must be willing to develop a working knowledge of fleet equipment. Ability to troubleshoot and work through problems efficiently. Read, monitor, and record various operating conditions such as pressure, temperature, hours of operations, fuel consumed, water levels, etc. De-pressure equipment. Responsible for calculating, designing, and ensuring proper flows, temperatures, and pressure levels. Moderate use of hand tools to work with and repair mechanical and electrical equipment. Mechanically inclined Understanding of simple electronics and electrical equipment is beneficial. Will be required to complete all training including Flash Arc Training and Basic Electrical Safety Training as provided. Must properly use ladders and safety harnesses. Must be able to determine appropriate level of personal protective equipment (PPE) needed for the specific assigned task. Must possess the ability to self-supervise on daily tasks and metrics. Ability to work with a team and standalone for multiple hours. Must present equipment, tools, and self in an orderly and tidy manner. Be available by phone while on scheduled rotation. Able to operate a company vehicle in a safe manner as well as maintain a clean driving record. Comply with all safety standards and procedures. Oversee safety and environmental requirements while operating equipment onsite along with assisting with incident response and investigations as needed. On time completion of all assigned training Promotes ethical behavior in all aspects of the business and lead by example. Computer literate with the ability to utilize online forms/automation. All other duties and responsibilities as assigned by Supervisor. Other Requirements: Minimum 7+ years related experience, preferably in the oil and gas industry, rental, or electrical industry. Extensive experience working with PRS/MRU/Dehydration systems. Understanding of electronics, electrical equipment, and electrical safety. Must properly use ladders and safety harnesses. Able to operate a company vehicle in a safe manner as well as maintain a clean driving record. High School diploma, skilled labor certificate, or equivalent. Willingness to work in exposure to extreme temperatures, wind, and precipitation, in addition to working at heights. Ability to stoop, sit, stand, or be on their feet for extended periods of time. Able to lift 25 pounds up to 10 times per shift. Valid Driver's License. Good written and verbal communication skills. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. VoltaGrid is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, and general treatment during employment. #LI-DNP

AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Summary We are seeking a skilled HVAC Compressor Technician to support plant operations by maintaining, troubleshooting, and repairing HVAC systems, with a focus on compressor units and chillers. This role is critical to ensuring optimal climate control and equipment performance across production facilities. The technician will work closely with maintenance and production teams to uphold safety, efficiency, and uptime standards. Responsibilities Perform scheduled and unscheduled maintenance on HVAC systems, including compressors, chillers, air handlers, and pneumatic controls. Diagnose and repair mechanical, electrical, and refrigerant-related issues in HVAC and chiller systems. Monitor system performance and conduct inspections to identify potential failures or inefficiencies. Support installation and commissioning of new HVAC and chiller infrastructure and upgrades. Maintain accurate logs of maintenance activities, inspections, and repairs. Ensure compliance with OSHA and internal safety protocols. Collaborate with production and facilities teams to minimize downtime and support operational goals. Assist with emergency repairs and participate in on-call rotations as needed. Required Qualifications High school diploma or equivalent. Minimum 3 years of experience in HVAC maintenance, with a focus on compressor and chiller systems. Familiarity with refrigerant recovery, ductwork, and control systems. Ability to read and interpret technical manuals, schematics, and blueprints. EPA Section 608 Certification (Type II or Universal). Strong troubleshooting and problem-solving skills. Basic computer skills for maintenance logging and reporting. Preferred Qualifications Technical certification in HVAC or related field. Experience with Trane, Carrier, or similar commercial HVAC and chiller systems. Knowledge of building automation systems (BAS) and PLC interfaces. Familiarity with maintenance management software (e.g., Rippling, CMMS). Work Environment Work is performed in a production plant environment with exposure to varying temperatures and noise levels. May require climbing ladders, working at heights, and lifting heavy equipment. Use of PPE is mandatory in designated areas. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Four dynamic, integrated companies make up the Transwestern enterprise, giving us the perspective to think broadly, deeply and creatively about commercial real estate. Clients and investors rely on us for expertise that spans institutional and opportunistic investment, development, hospitality, and brokerage and asset services. Our award-winning, collaborative culture empowers team members with resources and independence to work across boundaries in pursuit of innovative solutions, reinforcing a reputation for service excellence that translates to measurable results. Through offices nationwide and alliance partners around the globe, we positively impact the built environment and our communities while fostering a work climate that champions career vitality for all. Learn more at transwestern.com and @Transwestern. Part of the Transwestern companies, Transwestern Real Estate Services (TRS) strives to add value for investors, owners, and occupiers across all commercial property types. Fueled by a holistic perspective of the real estate life cycle, agility and creativity are hallmarks of our approach, while vast national resources and sound market intelligence underpin customized recommendations and property solutions. Transwestern is built on a common purpose - Empowering Good People to do Extraordinary Things Together . We are committed to the hiring of smart, passionate, hard-working people who understand the benefits of both collaboration and independence. POSITION SUMMARY: The HVAC Technician is responsible for performing skilled mechanical duties in the inspection, preventive maintenance, repairs, installation and alteration of the property's heating, ventilation, air conditioning (HVAC) and related equipment. The HVAC Technician's contact with tenants, prospective tenants, owners, and vendors is to be guided by the highest professional standards including positive, supportive, friendly behavior and legendary service. This is a dynamic, on-site role that places you at the heart of the action. As a result, an essential function of this position is working on-site. Remote or hybrid options are not available. Being on property allows you to build strong relationships with clients and tenants, respond in real time, and make a visible impact every day. POSITION ESSENTIAL FUNCTIONS Inspect, repair, modify and install HVAC equipment including air conditioning compressors, receivers, condensers, chillers, cooling towers, pumps, automatic and hand valves, expansion valves and capillary tubes. Conduct regular preventive maintenance inspections on all equipment including, isolated heating and ventilating units, boilers, gas and electrically operated HVAC equipment, and make necessary adjustments, service and repairs Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, belts, compressors, heat exchangers, high limit controls, pressure controls, safety valves, and automated gas valves. Operate a variety of hand and power tools, welding, vacuum pump, test equipment utilized in the trade. Maintain equipment in effective and safe working condition. Maintain parts and tools inventory utilizing the properties computer maintenance management system (CMMS). Perform skilled electrical maintenance work in the repair, installation and alteration of HVAC equipment, components, timers, motors and wiring systems as needed; connect motors to control panels. Maintain regular attendance. Provide tools essential to performing troubleshooting, repairs, preventative maintenance on the HVAC and building equipment. Assist the Engineering team in the training of the theory and practical knowledge of basic HVAC applications. Perform skilled mechanical maintenance duties in the inspection, repairs, installation and alteration of heating, ventilation, air conditioning and related equipment and facilities. Operate specialized machinery, equipment and tools utilized in the repair, installation and maintenance of heating, ventilation, air conditioning. POSITION REQUIREMENTS High school diploma or general education degree (GED) and a minimum of two years of related experience and/or trade school training or equivalent combination of education and experience : Standard practices of the HVAC trade Theory and practical knowledge of HVAC systems and materials, methods and tools used in the operation and repairs of HVAC Understand applicable building codes, ordinances and regulations of State and local authorities pertaining to HVAC and boilers. Understand and follow current OSHA and ASHRAE guidelines. Knowledgeable with the operations of: Air compressors and pneumatic controls - DDC controls Manual and electrical tools and equipment applicable to the HVAC trade Welding and soldering techniques Healthy and safety regulations Basic record-keeping techniques Proper methods of storing equipment, materials and supplies Communicate effectively both orally and in writing. Work cooperatively with others. Work independently with little direction. Meet schedules and timelines. Maintain routine records and prepare reports. Work is performed while standing, sitting and/or walking. Requires the use of hands for simple grasping and fine manipulations. Requires bending, squatting, crawling, climbing, reaching. Requires the ability to lift, carry, push or pull medium weights, up to 75 pounds. Requires activities involving being around moving machinery, exposure to marked change in temperatures and humidity, and exposure to dust, fumes and gases. Applicants must be willing to travel to multiple locations as part of their duties and be “on-call” as needed. WORK SHIFT: First Shift (United States of America) LOCATION: Midland, TX This is a dynamic, on-site role that places you at the heart of the action. As a result, an essential function of this position is working on-site. Remote or hybrid options are not available. Being on property allows you to build strong relationships with clients and tenants, respond in real time, and make a visible impact every day. ABOUT US Transwestern's Guiding Principles are woven into the fabric of our firm and underscore the value of each individual team member. We embrace inclusion - not only as the right thing to do, but as a reflection of who we are. It is our responsibility and heartfelt desire to create an environment that elevates the human spirit and brings out the best in everyone. Different backgrounds, life experiences and cultures shape our individual perspectives and ultimately generate the best results for our clients. Strategic human capital planning combined with development initiatives foster a work environment that celebrates uniqueness and champions the achievements attained through collaboration. Please note that all candidates selected for an offer of employment are subject to pre-employment background checks, which may include but are not limited to, based on the role for which they have been selected: criminal history, education verification, social media review, motor vehicle records, credit history, and professional license verification. In addition, your employment with Transwestern is subject to successfully passing a drug screen check prior to your starting with the Company along with satisfactory references. We understand you have a choice when choosing where to work and pursue a career. We understand you are unique and have your story. We want to hear it. We encourage you to apply today so that you may become a part of the Transwestern story.

Job DescriptionSalary: Reinvigorate your career with an organization that values teamwork, expertise, and integrity. Were looking for an experienced Lead Valve Services Technician to join our growing team and take a leadership role in managing valve service operations, customer relationships, and business growth opportunities. This position is ideal for someone with hands-on relief valve experience, strong organizational and communication skills, and a passion for delivering top-quality service in the oil and gas industry. Who we are: At the Crimson Group, we provide our clients with high-value automation, instrumentation, electrical design, and process operation solutions. With the capabilities of a large enterprise, and the agility and responsiveness of a small company, we are a customer-focused provider of automation and integrated solutions. Crimson Group provides total integration of design, project management, panel manufacturing, installation/commissioning, maintenance, and repair for North America and select international markets. What we Offer: Competitive hourly compensation. Comprehensive benefit package and 401k plan. A company laptop and cell phone reimbursement. An environment of continuous learning with the opportunity to enhance your skills & experience and grow within the organization. The opportunity to participate in charitable events through our charity, RedTail Community Foundation. What you will be Doing: Oversee and execute valve testing, inspection, repair, and maintenance activities. Assist with scheduling, resource allocation, and service documentation for multiple client projects. Develop and maintain strong client relationships to ensure satisfaction and repeat business. Lead, mentor, and support valve technicians in the field and shop, ensuring safety and quality standards are upheld. Perform or supervise testing and calibration of relief valves to meet company and safety standards. Assist in troubleshooting and problem-solving of complex valve issues. Track project progress, costs, and customer requirements to ensure timely delivery. Collaborate with operations, sales, and management to identify growth opportunities in valve services. Support business development by identifying client needs and assisting with proposal or quote preparation. Maintain detailed records of work performed, certifications, and compliance documentation. Your Skills and Qualifications: 35+ years of hands-on experience with relief valves, safety valves, and related pressure control equipment. Previous experience in a lead technician, coordinator, or supervisory role. Proven customer service and account management skills with the ability to build trust and long-term relationships. Excellent leadership, communication, and organizational skills. Proficiency with scheduling tools, maintenance tracking systems, and Microsoft Office Suite. Ability to manage competing priorities and meet deadlines in a fast-paced service environment. A valid drivers license and willingness to travel occasionally to client sites. Technical training or certification in mechanical, instrumentation, or valve technology. Background in oil & gas, industrial maintenance, or manufacturing. Safety-conscious, reliable, and proactive approach to problem-solving. A results-driven mindset with a focus on quality, customer satisfaction, and continuous improvement. **As part of our commitment to maintaining a safe and professional work environment, the Crimson Group of Companies conducts comprehensive background checks and drug and alcohol testing on all prospective employees as part of the final offer process. These checks are intended to verify the accuracy of information provided by candidates and assess any potential risks to the company or its employees. All offers of employment are contingent upon the successful completion of these background checks.** Please note: We do not accept phone calls regarding job opportunities. To ensure fairness and consistency in our hiring process, all candidates must follow the application instructions outlined in the posting. Thank you for your understanding.

Who We Are Kirby-Smith Machinery, Inc. is a leading distributor of heavy equipment and cranes in the central United States. We are at the forefront of today's construction industry growth and have several exciting job opportunities for talented, energized professionals across the region who want to join our #WeAre1KirbySmith family! Heavy Equipment Shop Service Technician/Mechanic Benefits Above-Average Industry Pay Comprehensive Benefits Package (including Medical/Dental/Vision) 401K Plan with Company Match Generous PTO Package/Paid Holidays Short/Long Term Disability Growth Opportunities Paid Training Family-owned and Operated Health and Wellness Heavy Equipment Shop Service Technician/Mechanic Specific Benefits Relocation assistance available for qualified candidates Uniforms & Steel/Composite Safety Toed Boots provided Highly productive shop Continued education, manufacturer hands-on and web-based training Clean and professional work environment Company-paid Accident Insurance Heavy Equipment Shop Service Technician/Mechanic Position Purpose Responsible for performing quality work on various brands as effectively and profitably as possible. This includes diagnosing issues, ordering parts, writing technical reports, maintaining the care of company assets, and maintaining proper communication with others. Heavy Equipment Shop Service Technician/Mechanic Essential Functions Communicates and supports the Kirby Smith vision and core values of One Mission, One Team, One Plan, One Goal Performs Shop repairs and maintenance with little or no direct supervision Diagnoses and evaluates problems with equipment; makes repairs using established guidelines in accordance with established flat rates Plans methods and sequence of performing assigned repairs Notifies the Manager of any additional work required on the unit Models safe work habits and abides by company safety policies and procedures always Keeps rework within established guidelines Organizes, cleans, and maintains a safe work area Contributes to departmental and product line goals Completes required paperwork efficiently and promptly Attends factory and other training as specified by the supervisor Ensures that the shop equipment remains in optimal working order and is consistently maintained in a clean state Displays professional demeanor with customers, managers, and colleagues Promotes goodwill with customers and exhibits excellent customer relations behaviors Exhibits consistent and reliable on-site attendance Performs other job-related duties as assigned Heavy Equipment Shop Service Technician/Mechanic Minimum Qualifications High School Diploma or Equivalent Two (2) years' experience in diagnosing and repairing construction equipment Ability to read complex hydraulic and electrical schematics Furnish and maintain a set of hand tools and any special tools required by the company Ability to occasionally work overtime, stay overnight, and work on weekends when needed Maintain a valid driver's license Heavy Equipment Shop Service Technician/Mechanic Physical Requirements: Pushing/Pulling/Lifting/Carrying up to 100 pounds without assistance Physical ability to squat, twist, turn, bend, stoop, climb, and reach overhead Must be able to work in extreme heat or cold and wet, damp, dusty, or windy conditions and tolerate exposure to typical noises, hazardous materials, and fumes/odors associated with the shop Physical ability to perform maintenance on equipment for extended hours, with continual mounting and dismounting throughout the workday Ability to adhere to personal protective equipment (PPE) policy and maintain individual PPE in a functional condition This is considered a Safety-Sensitive position. We are an equal opportunity employer and prohibit discrimination or harassment based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Four dynamic, integrated companies make up the Transwestern enterprise, giving us the perspective to think broadly, deeply and creatively about commercial real estate. Clients and investors rely on us for expertise that spans institutional and opportunistic investment, development, hospitality, and brokerage and asset services. Our award-winning, collaborative culture empowers team members with resources and independence to work across boundaries in pursuit of innovative solutions, reinforcing a reputation for service excellence that translates to measurable results. Through offices nationwide and alliance partners around the globe, we positively impact the built environment and our communities while fostering a work climate that champions career vitality for all. Learn more at transwestern.com and @Transwestern. Part of the Transwestern companies, Transwestern Real Estate Services (TRS) strives to add value for investors, owners, and occupiers across all commercial property types. Fueled by a holistic perspective of the real estate life cycle, agility and creativity are hallmarks of our approach, while vast national resources and sound market intelligence underpin customized recommendations and property solutions. Transwestern is built on a common purpose - Empowering Good People to do Extraordinary Things Together. We are committed to the hiring of smart, passionate, hard-working people who understand the benefits of both collaboration and independence. POSITION SUMMARY: The HVAC Technician is responsible for performing skilled mechanical duties in the inspection, preventive maintenance, repairs, installation and alteration of the property's heating, ventilation, air conditioning (HVAC) and related equipment. The HVAC Technician's contact with tenants, prospective tenants, owners, and vendors is to be guided by the highest professional standards including positive, supportive, friendly behavior and legendary service. This is a dynamic, on-site role that places you at the heart of the action. As a result, an essential function of this position is working on-site. Remote or hybrid options are not available. Being on property allows you to build strong relationships with clients and tenants, respond in real time, and make a visible impact every day. POSITION ESSENTIAL FUNCTIONS * Inspect, repair, modify and install HVAC equipment including air conditioning compressors, receivers, condensers, chillers, cooling towers, pumps, automatic and hand valves, expansion valves and capillary tubes. * Conduct regular preventive maintenance inspections on all equipment including, isolated heating and ventilating units, boilers, gas and electrically operated HVAC equipment, and make necessary adjustments, service and repairs * Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, belts, compressors, heat exchangers, high limit controls, pressure controls, safety valves, and automated gas valves. * Operate a variety of hand and power tools, welding, vacuum pump, test equipment utilized in the trade. * Maintain equipment in effective and safe working condition. * Maintain parts and tools inventory utilizing the properties computer maintenance management system (CMMS). * Perform skilled electrical maintenance work in the repair, installation and alteration of HVAC equipment, components, timers, motors and wiring systems as needed; connect motors to control panels. * Maintain regular attendance. * Provide tools essential to performing troubleshooting, repairs, preventative maintenance on the HVAC and building equipment. * Assist the Engineering team in the training of the theory and practical knowledge of basic HVAC applications. * Perform skilled mechanical maintenance duties in the inspection, repairs, installation and alteration of heating, ventilation, air conditioning and related equipment and facilities. * Operate specialized machinery, equipment and tools utilized in the repair, installation and maintenance of heating, ventilation, air conditioning. POSITION REQUIREMENTS * High school diploma or general education degree (GED) and a minimum of two years of related experience and/or trade school training or equivalent combination of education and experience * :Standard practices of the HVAC trade * Theory and practical knowledge of HVAC systems and materials, methods and tools used in the operation and repairs of HVAC * Understand applicable building codes, ordinances and regulations of State and local authorities pertaining to HVAC and boilers. * Understand and follow current OSHA and ASHRAE guidelines. * Knowledgeable with the operations of: * Air compressors and pneumatic controls - DDC controls * Manual and electrical tools and equipment applicable to the HVAC trade * Welding and soldering techniques * Healthy and safety regulations * Basic record-keeping techniques * Proper methods of storing equipment, materials and supplies * Communicate effectively both orally and in writing. * Work cooperatively with others. * Work independently with little direction. * Meet schedules and timelines. * Maintain routine records and prepare reports. * Work is performed while standing, sitting and/or walking. * Requires the use of hands for simple grasping and fine manipulations. * Requires bending, squatting, crawling, climbing, reaching. * Requires the ability to lift, carry, push or pull medium weights, up to 75 pounds. * Requires activities involving being around moving machinery, exposure to marked change in temperatures and humidity, and exposure to dust, fumes and gases. * Applicants must be willing to travel to multiple locations as part of their duties and be "on-call" as needed. WORK SHIFT: First Shift (United States of America) LOCATION: Midland, TX This is a dynamic, on-site role that places you at the heart of the action. As a result, an essential function of this position is working on-site. Remote or hybrid options are not available. Being on property allows you to build strong relationships with clients and tenants, respond in real time, and make a visible impact every day. ABOUT US Transwestern's Guiding Principles are woven into the fabric of our firm and underscore the value of each individual team member. We embrace inclusion - not only as the right thing to do, but as a reflection of who we are. It is our responsibility and heartfelt desire to create an environment that elevates the human spirit and brings out the best in everyone. Different backgrounds, life experiences and cultures shape our individual perspectives and ultimately generate the best results for our clients. Strategic human capital planning combined with development initiatives foster a work environment that celebrates uniqueness and champions the achievements attained through collaboration. Please note that all candidates selected for an offer of employment are subject to pre-employment background checks, which may include but are not limited to, based on the role for which they have been selected: criminal history, education verification, social media review, motor vehicle records, credit history, and professional license verification. In addition, your employment with Transwestern is subject to successfully passing a drug screen check prior to your starting with the Company along with satisfactory references. We understand you have a choice when choosing where to work and pursue a career. We understand you are unique and have your story. We want to hear it. We encourage you to apply today so that you may become a part of the Transwestern story.