Service technician jobs in Quincy, MA - 6,440 jobs

Job Title: Field Service Technician Coverage area: Greater Boston area Department: Service (Operations) Reports to: Service Manager FLSA Status: Hourly, Non - Exempt SUMMARY: The Field Service Technician provides customer service in person and/or by telephone to customers in and around the greater Boston area. Technicians will also help fulfill the needs of the maintenance schedule when needed by performing preventative maintenance on parking access, as well as software and/or hardware. Works with upper-level support to troubleshoot/setup/configure car access systems to include LAN (Local Area Networks). Effectively understands and troubleshoots basic setup of credit card configuration within the PARCS (parking access & revenue control system) network. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform field repairs on parking access system and building access systems, software and/or hardware related Troubleshoot and correct problems on devices/equipment, down to board level, low voltage Correct/fixes; minor to complex software issues on parking/access systems Understand and troubleshoot the entire setup of a SKIDATA network (LAN) Properly identifies all network devices on a LAN (router, modem, switch etc.) Can properly use handheld devices like, but not limited to, multi meter, Network tester, toner, etc. Understand basic relay logic Works with upper-level support to setup/configure firewall, router, and other network devices Provides effective customer service, to internal and external customers Properly identifies when higher level support is needed. Work closely with peers and support team to ensure customer expectations are met Effectively execute troubleshooting instructions from higher level support Properly maintain vehicle status and maintenance, as required Properly maintains his/her inventory levels, by properly transacting in ERP (SNOW) system Communicates effectively with service coordinator, advisors, and service management team Responsible for transactions for assigned work orders (WOs) in ERP system on a per WO basis (parts and labor), also to include maintenance checklist, as required by existing processes Perform monthly preventative maintenance - scheduled inspection, cleaning, lubricating, and adjusting of the equipment Other duties, as assigned QUALIFICATIONS: This is an experienced position within the Service Department. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: Must be at least 21 years old, with a valid driver's license; have and maintain a driving record clean of any major or numerous violations Must be able to drive to field / customer locations to perform field work Working knowledge of Windows Server 2008/2012/2016, SQL, Windows OS 7, 10 and above, and network firewall configurations Must possess aptitude to learn new technologies The ability to work independently all while keeping others informed of your processes and progress via multiple avenues - including ERP System, email, and/or phone Proficiency in Microsoft Project, Excel, and PowerPoint Must be able to complete SKIDATA technical certified training courses - within 24 months; or has completed required certified courses in the technical career track. Specific product/equipment and software training supplied by SKIDATA EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) or equivalent and two (2) years of training/experience in related field required, or equivalent combination of education and experience. Good skills in the use of hand tools required - experience using ERP software a plus. CERTIFICATES, LICENSES, REGISTRATIONS: Valid Driver's License, in state of residence. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to drive motor vehicle; sit; stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop; kneel; crouch; or crawl; and talk; or hear. The employee must frequently lift and/or move more than 50 pounds. Specific vision abilities required by this job include close vision, distance vision, and depth perception; standing for long periods of time; climbing ladders, stairs, ramps; handling and assembling small parts, use of a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and computers/digital equipment. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and/or automobiles. The employee is occasionally exposed to wet and/or humid conditions; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock. The noise level in the work environment is usually moderate to occasionally loud. TRAVEL: There may be occasional travel outside of the employee's regular region; this travel may be by airplane or vehicle and will be planned with as much advanced notice as possible. SCHEDULE: Monday through Friday - Available 8am - 5pm. Saturday and Sundays - Possible with advance notification. The general hours of the position are Monday through Friday (8 a.m. to 5 p.m.); however, the expectations are that you be flexible to work as the needs of the business require. This may require occasional overtime; working on Saturday/weekends; and/or before or after the hours of 8 a.m. to 5 p.m. Technicians are required to be on an on-call rotation for one week per month. Supervisor will give as much advance notice as possible and try to evenly distribute hours based on business needs among the employees with skills, knowledge and ability for the work that needs to be accomplished. SKIDATA Inc. is an equal opportunity employer. All qualified applicants for employment will be considered without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, status as an individual with a disability, veteran status, or any other basis protected by federal, state, or local law. EEO M / F / D / V

Responsibilities: Go to different client sites to diagnose and repair refrigeration and ice machine equipment. Completing the necessary paperwork Working with the parts department for precise parts identification and ordering. Making sure the parts are installed correctly Keep the service truck tidy and maintain an organized inventory of parts and tools. Working with the manufacturers, sales reps, dealers, and customers. Collaborate with manufacturers for equipment diagnosis when required. Qualifications: At least five years experience in refrigeration/ice machine equipment repair Previous experience in gas, electric, plumbing, and or steam repairs is a plus EPA certification required. Good customer service skills Able to multi-task and adapt to varying tasks Experience using various hand tools Valid drivers license Hours are: Monday through Friday - First Shift The pay is up to $115K a year based on experience Benefits: Companywide Incentive Compensation Plan Paid Lunch Paid Time Off 9 Company Holidays 401K - 4% Safe Harbor Match Holiday Pay $400 + Double Time On-Call Pay $300 + time and half Health Insurance (monthly contribution amount below) $1,000 Funded Health Savings Account Dental Insurance - 100% covered Vision Insurance Life Insurance 1X salary + option to buy up Long Term/Short Term Disability Insurance Company Vehicle, Gas Card, Cell Phone, Tool Allowance, Uniforms Regular Performance Reviews & Pay Increases OT availability Tuition Reimbursement

City Boston, Framingham, Marlborough, Nashua, Worcester State/Province Massachusetts, New Hampshire Country United States Department DIRECT SALES Date Monday, November 3, 2025 Working time Full-time Ref# 20036651 Job Level Specialist Job Type Experienced Job Field DIRECT SALES Seniority Level Associate Currency USD - United States - US Annual Base Salary Minimum 39,510 Annual Base Salary Maximum 79,020

Overview: Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. If you are a current associate of Primo Brands, please apply here Factory Location: Norton, MA Compensation: $41.25/hr at time of hire; $41.75/hr at 90 days of employment; $42.25/hr at 180 days of employment upon successful review Schedule: 8-hour day shift with flexibility to cover other shifts as needed Ability to work holidays and weekends per business needs Benefits of working for Primo Brands: Health Benefits: Medical, prescription, dental, vision, flexible spending account (FSA), dependent care flexible spending account (FSA), health savings account (HSA) Retirement/Investing: 401K with a 5% match, Employee Stock Purchase Plan (ESPP) Insurance: Employee Life Insurance, short and long-term disability, critical illness, hospital indemnity, accident insurance, spouse/domestic partner/child life insurance, accidental death and dismemberment Other great benefits: Employee discounts, save on auto, home, and pet insurance, tuition reimbursement, paid vacation and sick time, 9 paid holidays and 3 paid floating holidays, paid leave for when you have a baby, adopt a child, or become a foster parent, legal services, identity theft protection, employee assistance program (EAP), adoption reimbursement benefit, FEDlogic, commuter benefits Responsibilities: Perform routine and corrective maintenance, testing, and troubleshooting on equipment Repair, rebuild, and overhaul equipment and maintain accurate records of all testing and repairs Identify waste reduction opportunities and assist in related projects Participate in preventive maintenance programs and recommend equipment to be included to reduce cost of operations Troubleshoot, investigate, and repair all mechanical, electrical, and pneumatic machine systems Dismantle, clean, and test electrical, electronic, and mechanical components to determine level failures Train and coach employees to prevent production loss and address equipment failures Keep accurate maintenance logs and records Recommend equipment for preventive maintenance programs Perform preventive maintenance tasks to identify mechanical and electrical issues Communicate with suppliers, contractors, and vendors Support areas include Production, Mechanical Room, Water Processing, Boiler Room, and Wastewater Treatment Eliminate machine failures from recurring by utilizing the Breakdown Analysis process Qualifications: High School Diploma, GED, or equivalent; technical training or certifications a plus 3+ years of maintenance experience in manufacturing Successful completion of the Mechanical Aptitude Test Experience with compressors, chillers, water treatment, boilers Strong knowledge of pneumatics, electrical systems, hydraulics, and water processing Familiarity with bottling equipment, PM programs, and SAP system preferred Electrical knowledge of single and three phase power, ability to diagnose and replace motors Proficiency in reading mechanical drawings and OEM technical prints Able to work independently while effectively fostering and building a collaborative team environment Effective communication across all organizational levels Proficient in Microsoft Office applications Committed to achieving a zero-injury workplace Able to lift and pull 50 lbs. as needed while performing work continuously throughout the shift Ability to sit, stand, push, pull, climb ladders, walk all day with or without reasonable accommodation Must be able to do physical inspections of equipment that will require climbing, reaching, and extending arms overhead Primo Brands' established portfolio includes billion-dollar brands Poland Spring and Pure Life , premium brands like Saratoga and Mountain Valley , regional leaders such as Arrowhead , Deer Park , Ice Mountain Ozarka , and Zephyrhills , purified brands, Primo Water and Sparkletts , and flavored and enhanced brands like Splash and AC+ION . Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members .

Health & Wellness We offer comprehensive health and wellness plans, including medical, dental and vision coverage for eligible employees and family members; paid time off; and commuter benefits. In addition, supplemental income protection including short term insurance coverage is available. We also offer a 401(k)-retirement savings plan to assist eligible employees in saving for their retirement. Participants are provided access to financial wellness resources and retirement planning services. Military Hiring Exela seeks job applicants from all walks of life and backgrounds including, but not limited to, those who are transitioning military members, veterans, reservists, National Guard members, military spouses and their family members. Individuals will be considered no matter their military rank or specialty. Job Description CSA TS Client Services About the Role: As a Client Services Associate (CSA) in the Technical Support department within the Customer Service category, you will serve as a key liaison between our company and our clients, providing exceptional support and assistance. Your primary responsibility will be to address client inquiries, troubleshoot technical issues, and ensure timely resolution of all support requests. You will play a vital role in maintaining client satisfaction and fostering positive relationships by delivering high-quality service and support. Essential Job Responsibilities: Daily tasks and responsibilities include, but are not limited to the following: Maintain a positive and professional demeanor in all client interactions, striving to exceed expectations and deliver an outstanding service experience that reinforces client loyalty and satisfaction. Provide consistent quality experience in satisfying client demands. Continuously monitor email. Respond accordingly, as per business processes and operational guidelines, in a timely manner. Demonstrate strong attention to and focus on details and processes. Perform frequent quality checks during process. Handle time-sensitive, confidential materials in accordance with privacy protection policies. Establish operating procedures and quality standards. Adapt to process changes as required by the client. Document all client interactions, inquiries, and resolutions accurately and comprehensively in the appropriate systems or databases, ensuring thorough record-keeping and data accuracy. Collaborate closely with internal technical teams to escalate complex issues and ensure timely resolution, advocating for clients and providing regular updates on the status of their cases. Identify trends or recurring issues in client inquiries and work proactively to address root causes, contributing to ongoing improvements in product quality and customer satisfaction. Provide feedback to internal teams based on client insights and experiences, advocating for enhancements or new features to meet client needs and expectations. Other site national support and special projects as needed. Participate in cross-training. QUALIFICATIONS: 2+ years of customer service experience High school diploma or equivalent (GED) Computer experience (Microsoft Office and/or Google Workspace. i.e. Word, Excel, E-mail, etc.) Excellent verbal and written communication skills REQUIREMENTS Strong organizational skills, attention to details Ability to work with minimal supervision Ability to run a variety of tasks while fostering teamwork Ability to learn various programs and applications Ability to lift up to 55 lbs. Ability to consistently adhere to business procedure guidelines and policies, and company safety standards Accountability to meet the employer's attendance policy Ability to take and follow directions Professional presence "The pay range for this position starts at $19/hr; however, base pay offered may vary depending on job-related knowledge, skills, and experience. Bonus opportunities may be provided as part of the compensation package, in addition to a full range of medical, financial, and/or other benefits, dependent on the position offered.” EEO Statement Exela is committed to creating a diverse environment and is proud to be an equality opportunity employer. Qualified applicants will considered for employment without regard to their race, color, creed, religion, national origin, ancestry, citizenship status, age, disability, gender/sex, marital status, sexual orientation, gender identity, gender expression, veteran status, genetic information, or any other characteristic protected by applicable federal, state, or local laws. XBP Global recruiters or representatives will only contact you from emails ending with @xbpamericas, @xbpasia, @exelaonline.com, @exelatech.com, @lexicode.com, @rustconsulting.com ****************. We would never ask you for payment or ask you to deposit a cheque into your personal bank account during the recruitment process.

Fiber Technician Job ID: 554165589 Lightpath is one of the largest competitive local exchange carriers in the tri-state area. Weown and operate our infrastructure "from the ground up" by deploying over 20,000 route miles connecting 13,500 on-net/LIT buildings. With a strong portfolio of cutting edge solutions for Internet, WAN, Voice, SD-WAN, Security & Cloud services, we enable Enterprise customers of all sizes the ability to react to new challenges while developing best practices for the future. With Lightpath's continued focus on network excellence and a "customer first" service commitment, we are building a workforce of the best talent that will meet the needs of our customers and reflect the diverse communities we serve. Job Summary The Fiber Technician is a field position that directly works to help maintain and expand the fiber network as well as complete the following tasks along with additional duties as assigned. This position is an hourly position that will require the individual to always possess a valid driver's license, maintain a stellar driving record free from any major offences that may affect Lightpath' s MOD rating. The position is a hands-on labor-intensive job that requires a heavy amount of experience in fiber splicing, equipment installation, troubleshooting and cable placement. The work will take place in but is not limited to buildings, confined space, side of the roadway and aerial locations. This position will require off hours, weekend, and holiday work. In addition to being part of an on-call rotation in support of the network that will require being available during various holidays and weather events. Responsibilities Complete field survey of a path for a new cable to be installed within a building, conduit run or aerial pole path. Capture all the information related to the path using varioustools of technology anddocument in a step-by-step method of procedure, that will be customer facing. Lightpath to provide that form document. Ability to meet with representatives from different municipalities and review proposed projects, file, and submit permit applications, track the application, and follow up on its approval. Be able to communicate with other Lightpath employees to obtain any required information the municipality would request such as bonds and insurance documents or payments. Work directly with our customers in the field, take and perform calls and email to update on project status and share documentation on each project with co-workers. Track new and ongoing projects by maintaining numerous Project Trackers. AttendUtility, Municipal and customer meetings to review and obtain permissions for newly proposed customer projects. Some of these meetings occur after hours and weekends. Some of the meetings are out of State and require extended travel times. Operate a bucket truck and able to work aloft to access splice cases and lashing fiber cable. Install a lashing machine on the strand and lash small sections of fiber to secure the supporting strand. Access confined space locations to audit conduits and place cable or remove splice cases and place in the vehicle to have work completed. These spaces will require a pump to evacuate water and the person to work in a wet and dark environment. Shall possess knowledge of fiber optic filters and CDWM filter splicing and testing. The technician must also be able to operate an EXFO OTDR and 400 gig test set and work with Lightpath or contracted resources to complete fiber and provisioning testing for circuits on an as needed basis. Individuals must be willing to learn and attend continuing ed classes for OTDR, electronic equipment and fiber splicing. The technician must be able to operate a fusion splice machine (single and mass) for fiber optic cables. This work requires a steady hand and the ability to sit ina single location for extended periods of time. The technician must be able to work onladders both 28-foot extension and step up to 8-foot-high step ladders. The technician will also need to cover on-call shifts to support the Lightpath fiber Network. This at times may require working in adverse conditions and on holidays. Requirements Must have excellent follow-through skills, be detail-oriented and be able to develop and manage accurate data in Project Trackers. Ability to travel for short periods of time. College Degree in Engineering, Communications or related field experience preferred. 5+ years' experience in fiber optic construction installation and maintenance. Superb timeline tracking and daily reporting skills on Excel, MS Office, experience with MS VISIO a plus. Excellent customer service skill sets. Excellent communicator who can coordinate multiple moving parts and multiple customer tracking. Ability to use Google Earth. Ability to understand and manage project goals, and deadlines. Pro-Active and organized individual who has excellent follow through skills, comfortable meeting with customers, excellent time management, self-motivated individual. Articulate, organized, and detailed individual who can interact effectively with customers, and other internal employees related to the project. Excellent interpersonal and communications skills. Ability to work at night and off hours. Other duties as assigned. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Physical Requirements and Working Conditions Requires the ability to sit for extended periods, stand, bend, walk, communicate via telephone, computer and/or face-to-face contact, vision to monitor, and use basic office equipment such as a personal computer, copier, and fax machines regularly during work. May be required to operate vehicle for Company business. Work is performed in an office environment. Must be able to work outside in all types of weather to hang signs and flyers, vehicles, and business. Must be able to carry 75 pounds and work in an aerial lift device. Lightpath is an Equal Opportunity Employer committed to recruiting, hiring and promoting qualified people of all backgrounds regardless of gender, race, color, creed, national origin, religion, age, marital status, pregnancy, physical or mental disability, sexual orientation, gender identity, military or veteran status, or any other basis protected by federal, state, or local law. Lightpath collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. This position is identified as being performed in/or reporting to company operations in Massachusetts. The pay range at the time of posting in the specified locations is $60,000 - $70,000/year. Pay ranges are supplied in compliance with Massachusetts law. Pay is competitive and based on a number of job-related factors, including skills and experience. Some of our featured benefits include medical, dental, vision insurance, yearly bonus program and company matched 401k.

Service Technician - Every day is an opportunity for you to turn an apartment into a home. #WRK4UDR. UDR, Inc. and its affiliated companies are seeking a Service Technician to join our team at 100 Pier 4, our apartment community (369 homes) located in Boston, MA. Key Qualifications: Technical of vocational certificate and/or degree preferred. Minimum of two years of experience in building and mechanical maintenance including plumbing, electrical, appliance repair painting and drywall. Knowledge and experience of HVAC and carpentry a plus. EPA Type II or Universal certification preferred. Valid driver's license and rotating on-call responsibility required. Some locations require certification in pool operation (CPO). Essential Job Functions: Respond to resident requests for maintenance and service by taking appropriate action to repair and/or restore service within the quality and time standards established by the organization. Maintain the overall appearance and cleanliness of the community by ensuring that grounds, amenities, building exteriors/interiors, market ready units, breezeways, curbs, signage, leasing office, central garbage areas, parking lots and other buildings and common areas are free of debris, trash, graffiti, and other items which affect the appearance of the community. All deficiencies and or risk management safety issues are reported immediately. Ensure that apartments are ready for occupancy by performing various and as needed electrical, HVAC, plumbing, carpentry, appliance repair, and other miscellaneous equipment maintenance and repairs, as well as carpet cleaning, painting, and overall apartment cleaning or other activities as necessary or as directed. Maintain tools, equipment, and workspace and ensure they are organized and in proper working order, request replacements as necessary, and assist in stocking the inventory. Provide superior customer service to internal and external customers. Perform other duties as assigned or as necessary. Exceptional Benefits: We offer a comprehensive benefit package and discounts to live in our premier communities! UDR, Inc., an S&P500 company, is one of the nation's largest owners and managers of residential apartment communities with a mission of offering remarkable apartment homes in the most desirable locations throughout the United States. Share your expertise, skill and commitment to excellence with us, and be a part of UDR's team. #WRK4UDR Pay: $22-$26/hr. UDR is proud to provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. UDR is committed to providing and maintaining a diverse workforce and an inclusive work environment with equitable access and opportunity for associates to participate, grow, and reach their full potential. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Title: Machine Millwright Type: Full-Time 256 Samuel Barnett Boulevard, New Bedford MA, 02745 333 Bridge St, Fairhaven, MA 02719 Shift: 2nd Shift (2:50 PM - 11 PM) 3rd Shift (11pm - 7am) Weekend - WECB: Saturday & Sunday 10:50am -11pm +1-2 shifts during the week About the Role - We are looking for a skilled Machine Millwright to support our advanced manufacturing operations. In this role, you'll rebuild, repair, and maintain industrial machinery and equipment, playing a key part in keeping our operations running smoothly and safely. What You'll Do Troubleshoot and rebuild mechanical assemblies and automated systems Perform preventative and predictive maintenance on machinery Diagnose root causes of mechanical/electrical failures Conduct light welding, plumbing, and machining work Operate shop equipment, hand and power tools Use CMMS to record repairs and manage maintenance tasks Monitor spare parts inventory and order as needed What we're looking for 3+ years of experience maintaining and repairing industrial equipment Trade school diploma preferred Ability to interpret blueprints, diagrams, and schematics Strong mechanical aptitude and attention to detail Must provide own tools Special Credentials / Skills Demonstrated ability to install, repair, troubleshoot, and maintain machinery and equipment Skilled in dismantling and moving stationary industrial equipment (pumps, fans, tanks, conveyors, furnaces, generators) using hand and power tools Ability to operate hoisting/lifting devices (cranes, jacks, tractors) Skilled in inspecting machinery for irregularities and malfunctions Experience with power transmission, vacuum, and pneumatic systems Basic knowledge of electronic controls and safe work practices Strong communication and interpersonal skills Team player with the ability to work collaboratively Certifications: Preferred (but not required) MA Journeyman Electrician License MA 2nd Class Fireman License Universal Refrigeration License CDL (Class A or B) Forklift or man-lift certification

We are seeking cable technicians for ongoing low voltage projects across the state of MA, we will needs techs to have basic hand tools, reliable transportation, as well as the willingness to learn. *Job Type & Location*This is a Contract position based out of Woburn, MA. *Pay and Benefits*The pay range for this position is $20.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in Woburn,MA. *Application Deadline*This position is anticipated to close on Jan 19, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Riley Power group, LLC is a full-service maintenance and capital construction services company headquartered in Pinehurst, NC. We work nationwide on some of the most challenging, exciting construction and maintenance projects in the industrial, power generation, and defense sectors. We are currently hiring a skilled MOV Technician. If you are a hardworking person who possesses the skills and ability to perform the job as outlined below, we would love to hear from you! This position could be located anywhere nationwide. It all depends on where the client's needs are located. Essential Function of this position may include but is not limited to: Perform MOV refurbish activities including preventative and corrective maintenance, actuator regrease, electrical equipment removal/installation, valve position limit switch setup on Motor Operator Actuators (Limitorque, Rotork, EIM etc.). Qualification, education, and experience requirements: Must have 3 years' experience in MOV refurbishment. Completion of a Motor operated valve training course and pass MOV TPE. Must have a high school diploma or equivalent. Successful candidate must possess the willingness and ability to complete and pass all pre-employment and employment screening requirements which may include but are not limited to; practical and written skills assessments, computer-based-training, medical, psychological, background and substance abuse screening(s).

Hi, I hope you are doing good. I have a job opportunity related to your profile with one of our client, please find below Job Description for your review. If you are interested and available for the following position then please send your updated resume in word format along with your contact details to discuss further. Role:Technology Lead - Core Java, JSP, JDBC, J2EE, Struts, RESTful webservices, Hibernate, using the latest SDKs and tools and frameworks such as Spring, RxJava Duration: Full TIme Location: Cranston, RI Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education • At least 4 years of experience with Information Technology Preferred • At least 4 years of Java development experience, ideally in a team lead role • Knowledge of architectural design patterns, performance tuning and functional designs. • At least 4 years of experience in Core Java, JSP, JDBC, J2EE, Struts, RESTful webservices, Hibernate, using the latest SDKs and tools and frameworks such as Spring, RxJava • Ability to develop functional, technical and user interface designs for an application that meets the defined requirements (business, system performance and standards) • At least 4 years of experience in specific coding concepts and/or languages, especially around modern application architectures. • At least 2 years experience with web applications that use responsive design to better support mobile browsers. • AT least 2 years of experience in highly-secured online environments that use n-tier designs and extensive firewalling to enhance security. • At least 4 years experience interfacing with back-end applications using MQ, SOAP, RESTful services, and JSON. • At least 2 years of experience in multi data center physical implementation models for scalability and resilience. • Experience with Spring Boot, Netflix OSS, HATEOAS, Gradle/Maven is a plus. ReST/Resource Oriented Design, Wiremock, JUnit/Mockito/Assert4J, AMQP/JMS/MQ, Functional Reactive/ Lambdas/Streams, Agile/Jira,Jenkins/Cobertura/PMD/FindBugs are good to have. • Experience and desire to work in a Global delivery environment • Communication and Analytical skills Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education Additional Information All your information will be kept confidential according to EEO guidelines.

We're looking for a Technical Lead to join our Product Engineering team at our HQ in Kendall Square. This is a fantastic opportunity to work with an amazing team and make a real and immediate impact for our members and users. What you'll be doing: Build and test features for a rapidly growing consumer-facing application. Take a lead role in steering architecture to scale technology and process to a high scale and quality. Work closely with stakeholders in various internal groups to help balance delivery speed and quality. Mentor and train junior developers to maximize team velocity. About you and your skills: Customer focused outlook on software design. 5+ years building out maintainable applications with modern programming languages such as Java and Javascript Experience building solutions for AWS (or other cloud services) Experience working with distributed systems (microservices) Experience with containers and container orchestration systems a plus! Benefits: We pay 100% of the cost of both your medical and dental premiums directly to the insurance companies Establish an HSA to cover any out-of-pocket expenses you may incur that are not covered by the insurance Employee parking/MBTA costs Host lots of fun all-company events Fully stocked kitchen

Benefits: Bonus based on performance Competitive salary Signing bonus Company parties Opportunity for advancement $250 sign-on bonus and after 90-day probationary period another $750 We provide: Year-round stable, steady work Regular work hours Flexible scheduling Cover related expenses such as gas, oil changes, etc. *varies by location TruBlue t-shirts, polos, and other company gear for the team Strong office support TruBlue of Attleboro is a Home Ally Service company dedicated to providing premium Construction and handyman services with bonded and insured technicians, giving our customers peace of mind. Our mission is to help people maintain the safety and value of their homes by offering handyman services, home assessments, and regular maintenance We are searching for a reliable lead home technician (handyman/handywoman) to provide general home services to our customers in our community AND lead a group of technicians who will report to you. If you have 10 or more years of paid experience in general carpentry and handyman work, we want to hear from you. We are looking for a seasoned Team Leader with the following experience: Massachusetts CSL (Unrestricted Construction Supervisor License) (Not required but perferred) Managing 1 to 3 person teams Purchasing job materials Job estimating Deck building Door Installations Bathroom upgrades / remodel Quoting jobs / projects Drywall repair / patching/ caulking Flooring repair and installation General carpentry General home repairs and handyman work Kitchen repair / remodel Minor plumbing and electrical Painting interior and exterior NOTE: Requires your own Truck/Van and tools. Company owned Vans maybe available in the future if availble. What we value: FAMILY - Why else are we in this business? It is our most important asset, and we strive to make everyone feel like they are part of our family! INTEGRITY - Treating people with respect and looking for the same in return, everyone has a voice! TRUST - Achieved through reliability and credibility, cannot just talk it, ya gotta walk it too! QUALITY - Taking pride in one's work and providing the best value and customer experience possible, they will not always remember the work that was done, but they will remember you! The appropriate candidate for the Lead Technician/Handyman position will be proficient in miscellaneous around-the-house type repairs like carpentry, basic plumbing, drywall, painting, and basic electrical. Also, large construction projects requiring permits such as deck,. Candidates do not need to be licensed tradesmen, but those candidates are welcome to apply. Qualified candidates will need a driver's license, a reliable vehicle, and standard tools. Candidate must also be a legal citizen of the US, and speak fluent English We are actively interviewing for this position - if you have the skills we're looking for, apply today, and our hiring manager will follow up! All locations are independently owned and operated. Service offerings, certifications, and licenses vary by location. T.B. Franchising Systems, Inc. is not affiliated, connected or associated with TruPros International, Inc. or any of its services. All inquiries specific to employment at this location should be made directly to the franchise location, and not to TruBlue Home Service Ally Corporate office."

Benefits: Bonus based on performance Competitive salary Signing bonus Company parties Opportunity for advancement $250 sign-on bonus and after 90-day probationary period another $750 We provide: Year-round stable, steady work Regular work hours Flexible scheduling Cover related expenses such as gas, oil changes, etc. *varies by location TruBlue t-shirts, polos, and other company gear for the team Strong office support TruBlue of Attleboro is a Home Ally Service company dedicated to providing premium Construction and handyman services with bonded and insured technicians, giving our customers peace of mind. Our mission is to help people maintain the safety and value of their homes by offering handyman services, home assessments, and regular maintenance We are searching for a reliable lead home technician (handyman/handywoman) to provide general home services to our customers in our community AND lead a group of technicians who will report to you. If you have 10 or more years of paid experience in general carpentry and handyman work, we want to hear from you. We are looking for a seasoned Team Leader with the following experience: Massachusetts CSL (Unrestricted Construction Supervisor License) (Not required but perferred) Managing 1 to 3 person teams Purchasing job materials Job estimating Deck building Door Installations Bathroom upgrades / remodel Quoting jobs / projects Drywall repair / patching/ caulking Flooring repair and installation General carpentry General home repairs and handyman work Kitchen repair / remodel Minor plumbing and electrical Painting interior and exterior NOTE: Requires your own Truck/Van and tools. Company owned Vans maybe available in the future if availble. What we value: FAMILY - Why else are we in this business? It is our most important asset, and we strive to make everyone feel like they are part of our family! INTEGRITY - Treating people with respect and looking for the same in return, everyone has a voice! TRUST - Achieved through reliability and credibility, cannot just talk it, ya gotta walk it too! QUALITY - Taking pride in one's work and providing the best value and customer experience possible, they will not always remember the work that was done, but they will remember you! The appropriate candidate for the Lead Technician/Handyman position will be proficient in miscellaneous around-the-house type repairs like carpentry, basic plumbing, drywall, painting, and basic electrical. Also, large construction projects requiring permits such as deck,. Candidates do not need to be licensed tradesmen, but those candidates are welcome to apply. Qualified candidates will need a driver's license, a reliable vehicle, and standard tools. Candidate must also be a legal citizen of the US, and speak fluent English We are actively interviewing for this position - if you have the skills we're looking for, apply today, and our hiring manager will follow up! Compensation: $35.00 - $50.00 per hour TruBlue Home Service Ally ️ provides a unique and affordable approach to helping busy adults and seniors live a worry-free life by offering trustworthy handyman, home maintenance and senior modification services. Helping you maintain your home both inside and out, TruBlue's services include: handyman projects and to-do list chores, preventative home maintenance programs, seasonal work, and senior modification services, all handled by a professional and insured Tru-Pro ️ Technician. Thank you for considering a position with TruBlue. All locations are independently owned and operated. Service offerings, certifications, and licenses vary by location. T.B. Franchising Systems, Inc. is not affiliated, connected or associated with TruPros International, Inc. or any of its services. All inquiries specific to employment at this location should be made directly to the franchise location, and not to TruBlue Home Service Ally Corporate office.

Job Description About the Role: The Lead Service Technician plays a critical role in ensuring the efficient operation and maintenance of equipment and systems within the organization. This position is responsible for leading a team of service technicians, providing technical expertise, and ensuring that all service tasks are completed to the highest standards. The Lead Service Tech will coordinate service schedules, troubleshoot complex issues, and implement solutions that minimize downtime and enhance system performance. This role requires a proactive approach to identifying potential problems and mentoring junior technicians to develop their skills. Ultimately, the Lead Service Technician ensures customer satisfaction through timely, effective service delivery and continuous improvement of service processes. Minimum Qualifications: High school diploma or equivalent; technical certification or associate degree in a relevant field preferred. Minimum of 5 years of experience in a service technician role with demonstrated technical proficiency. Proven experience leading or supervising a team in a technical or service environment. Strong knowledge of mechanical, electrical, and electronic systems relevant to the industry. Valid driver's license and ability to travel to customer sites as required. Preferred Qualifications: Certification in specialized equipment or systems relevant to the company's service offerings. Experience with computerized maintenance management systems (CMMS) or similar software. Advanced troubleshooting and diagnostic skills using modern tools and technology. Formal leadership or management training. Experience working in a customer-facing role with strong communication skills. Responsibilities: Lead and supervise a team of service technicians in daily operations and service calls. Diagnose, troubleshoot, and repair complex mechanical, electrical, or electronic equipment issues. Develop and implement preventive maintenance plans to reduce equipment failures and downtime. Coordinate service schedules and manage resources to meet customer and organizational needs. Provide technical training and mentorship to junior technicians to enhance team capabilities. Maintain accurate service records, reports, and documentation in compliance with company policies. Collaborate with other departments to improve service processes and customer satisfaction. Ensure compliance with safety regulations and company standards during all service activities. Skills: The Lead Service Technician utilizes strong technical skills daily to diagnose and resolve complex equipment issues efficiently, ensuring minimal disruption to operations. Leadership and communication skills are essential for managing the service team, coordinating schedules, and providing clear guidance and training to junior technicians. Problem-solving abilities are applied continuously to develop preventive maintenance strategies and improve service processes. Organizational skills are critical for maintaining accurate records and managing multiple service requests simultaneously. Additionally, proficiency with diagnostic tools and software enhances the technician's ability to deliver timely and effective solutions, contributing to overall customer satisfaction.

JLL (NYSE: JLL) is a leading professional services firm that specializes in real estate and investment management. A Fortune 500 company, JLL helps real estate owners, occupiers and investors achieve their business ambitions. In 2016, JLL had revenue of $6.8 billion and fee revenue of $5.8 billion and, on behalf of clients, managed 4.4 billion square feet, or 409 million square meters, and completed sales acquisitions and finance transactions of approximately $145 billion. At the end of the second quarter of 2017, JLL had nearly 300 corporate offices, operations in over 80 countries and a global workforce of more than 80,000. As of June 30, 2017, LaSalle Investment Management had $57.6 billion of real estate under asset management. JLL is the brand name, and a registered trademark, of Jones Lang LaSalle Incorporated. For further information, visit ************ Job Description The Site Regulated Services Lead/Quality Technician will have a primary focus on overseeing select site services which require additional oversight due to the regulated environment, including but not exclusive of GMP cleaning and pest control. The person in the role will strive toward innovation, assist in lowering cost of delivery and work with suppliers to integrate the service into operations while dramatically enhancing the customer experience. The Regulated Services Lead will collaborate with Quality Assurance and the client to ensure effective participation in and adherence to quality programs. They will drive towards a higher level of cleanliness as well as achieve minimum scoring metrics as stipulated in both Client and Vendor contracts. The candidate will have a proven career history of successfully managing change and GMP/Quality experience. This position reports directly to the Site Facility Manager. ESSENTIAL FUNCTIONS Understand and ensure compliance in GMP space Customer Focus: Be a true innovator and genuine service-oriented individual to continuously monitor established quality procedures and resolve internal quality issues and customer complaints concerning product and or service dissatisfaction. Communication: Directly interface, both verbally and written, with client vendors, and JLL Management Compliance: Stay current with all Client, Federal and State regulations/codes, comply with specifications, and ensure standards are met. Support Quality Assurance to include training, assigning tasks, performance appraisals, conducting investigations, assisting with CAPAs, and monitor procedures to ensure processes are completed in an efficient and safe manner, and within the scope of policies and procedures. Perform/support audits and prepare SOP's and training materials. Provides information to Vendors, Facilities staff and Service Providers as required to ensure that quality assurance expectations are communicated, understood and followed. Inspections: Participate in the creation and implementation of inspections and other quality practices and procedures.. These inspections should serve as an assurance of quality as measured by client surveys. Provide leadership and direction to advance service quality and enhance the client partnership to continuously improve operations and influence the behavior of all employees. Supplier Performance Management: Deliver high quality, creative, and cost-effective solutions. Monitor work requests to trend vendor performance. Raise the bar in vendor quality and service while reducing overall costs. Work with IFM managers to hold vendors accountable for delivering high quality service per contract expectations, partnering with vendors to continuously improve service quality and improvement plans, and resolve/troubleshoot service issues at the site level. Analytical capability: Analyze trends and utilize data to anticipate and proactively address issues in the environment. Financial Acumen: Challenge year-over-year cost increases and proactively identify ways to reduce “process waste” and costs. Qualifications EDUCATION AND EXPERIENCE Bachelor's degree in Engineering, Mathematics, Science or another relevant field is desired but not required; experience in lieu of degree will be considered. 5 years of GMP or ISO 9000 experience in manufacturing. Experience in pharmaceutical manufacturing preferred. Must have proven, successful GMP or Quality Compliance/Assurance experience working with vendors performing services in GMP space GMP PEST CONTROL PROGRAM Proven capabilities on addressing and remediating pest sightings and investigations in a GMP Manufacturing Facility. Ability to establish rationales on Pest Control Best Practices. Ability to prepare and analyze Pest Control Trend Reports, subject to Regulatory Agency review. Experience in auditing GMP Pest Control Programs. Some knowledge in entomology and common insect behavior. GMP | CLEAN ROOM JANITORIAL AND SANITIZATION PROGRAMS Strong Knowledge of Environmental Controls of GMP Clean Rooms. Strong understanding of Regulatory Expectations. Ability to recommend, frequency and propose recommended dilutions of cleaning detergents for specific needs and situations. Develop cleaning procedures, work instructions and log forms in compliance with regulatory expectations. Train on Cleaning Methods and Procedures. Proven capabilities on addressing and remediating investigations related to Environmental Monitoring excursions as it related to a cleaning/disinfection programs. Ability to recognize when a GMP Change Control is required when proposing new cleaning methods, detergents and consumables. KNOWLEDGE, SKILLS, AND ABILITIES Must possess strong interpersonal skills with the ability to build rapport quickly Knowledge of Quality Engineering techniques, CMMS systems, and Quality Management Systems Exhibit excellent written and verbal communication skills Ability to analyze reports for the purpose of ensuring compliance with scope of work Excellent PC skills: proficient in all MS applications, especially Excel, Word, PowerPoint, Visio Speak, read and write fluent Englis Additional Information All your information will be kept confidential according to EEO guidelines.

**Are you motivated and eager to grow your career in refrigeration?** Hussmann's team of Technicians maintain, diagnose, and repair HVAC/R in supermarkets, convenience stores, cold storage facilities. Build your career with industry leaders since 1906. Join our team of hardworking, refrigeration experts and discover your potential. **Why Hussmann?** + Bi-annual bonuses based on performance + Paid training and access to online training videos + Paid drive time (including overtime) + 22 days paid off - 10 days of vacation, 12 company holidays + Company vehicle provided + On-the-job, hands-on training opportunities for Technicians, electric and mechanical theory, and model-based training + Sign-on bonus available **Responsibilities** Lead a team of service technicians based upon a specified geographic area or project/customer assignment to respond the customer's need for service and maintenance of equipment through maintenance, diagnosis and repair of refrigeration, heating & air-conditioning system commonly installed in supermarkets, convenient stores and cold storage facilities. + Development and maintenance of excellent customer relations. Fluent in applicable customer systems, business processes, administrative support, etc. + Actively pursuing personal development & supporting technician growth and development. Intrinsically involved with screening, interviewing, and hiring new technicians. + Under the direction of the Service Manager perform survey of new customer sites and assist in quoting service and maintenance. Assist with job quoting, staffing, estimating, understanding of project costing & drivers, etc. + Implement pertinent training and provide opportunities for ongoing professional development for technicians. + Coordinate technical support, guidance, and training to service technicians. + Strong skills for conflict resolution, problem solving, and prioritization among technicians, peers, leadership, customers, etc. + Champion of change initiatives across the enterprise. Coaching and Mentorship of newer team members to help ensure compliance to systems and processes. + Perform prescribed, routine maintenance procedures on supermarket refrigeration system and self-contained temperature-controlled merchandisers. + Enough system knowledge to match customer needs with potential sales opportunities and ability to complete rapid/accurate diagnosis. + Manage truck inventory. Orders, receives, bills out and maintains parts responsibly with a minimum of waste. Manages assigned vehicle within all company guidelines. Maintains a clean vehicle, performs required maintenance on time. + Complete necessary documents and electronic communication in a thorough, accurate, professional and timely manner. Demonstrate the ability to utilize hand-held device to complete necessary paperwork and invoicing requirements. + Ability to systematically utilize mirror and flashlight to check all joints, install PVC drain pipe with minimal supervision, set and trim cases, install and adjust glass doors and frames, use temperature sensors, use brazing and soldering techniques, and determine proper coil layout in complex boxes. + Accurately identify pipe size and fittings by sight, perform system refrigerant and oil conversions and test oil during conversion and electric weld a variety of metals and joint types. + Identify, troubleshoot, and correctly size thermostatic expansion valves. + Working knowledge of pressure regulators as they pertain to pressurized gases, refrigerant flow controls, TEV troubleshooting and replacement, and tracing complex schematic diagrams. + Demonstrate understanding of low/high pressure oil systems, split condensing/low ambient controls, refrigerated equipment startup, EMS controls, CO2 refrigeration, new retail store refrigeration startup, air flow characteristics and testing, motor VFD's, all system defrost types, recovery setup, torch setup, compressor operating parameters, conventional refrigeration system layout, and parallel rack system layout, and advanced wiring diagrams. + Demonstrate a working knowledge of gauge, scale, recovery, ECM, shaded pole, PSC, three phase motors, compressor operating parameters, oil differential pressure valves and oil level controls, . + Detect and repair leaks on conventional systems and parallel racks, solder with copper-to-brass and copper to steel, conduct compressor diagnosis and replacements, troubleshoot and repair more complex service calls, check/adjust oil management system and compressor oil level control. + Serve as a mentor to other technicians and lead HVAC/R PM programs. + Additional responsibilities as assigned. **Qualifications** **Formal Education Requirement:** **Required Level:** High School Diploma/GED **Preferred level:** HVAC-R Technical School Degree **Minimum Years of Experience Necessary:** + External Candidates: 7 years in the field or 5 years with Certification from a Technical School + Internal Candidates: 3 years as a Certified Technician w/ completion of OJT & Skills Assessment **Additional Information:** + Must have a Valid Driver's License and maintain a safe driving record accordance with the Fleet Policy. + Must be physically able to walk distances, bench and crouch, climb ladders, work at high elevations and lift/carry objects up to fifty pounds, repetitively and for an external period. + Must have excellent verbal and written communication skills, detail orientated and highly motivated. + Must have strong mechanical aptitude. + Must be able to work nights and/or weekends as required. + Working knowledge of basic refrigeration and/or knowledge of commercial refrigeration and HVAC is preferred. + Must have strong leadership skills, communication skills, and business acumen. + EPA 608 Universal Certification. + Superior decision-making ability and paperwork skills. + Able to schedule work for other technicians. + Able to correctly teach all the previously listed items. **Benefits:** + Health, Dental, and Vision Insurance + 401k with Company Matching Contribution + Discretionary 401k Company Contribution + Tuition Reimbursement Program + Life/Disability Insurance + Maternity and Paternity Leave + Panasonic Employee Discounts + 10 Days Paid Vacation and 12 Company Holidays + Employee Assistance Program + And more The salary range of $46.18 - $69.26 per hour is just one component of Hussmann's total package. Actual compensation varies depending on the individual's knowledge, skills, experience and location. This role may be eligible for discretionary bonuses and incentives. *The minimum hourly wage for this role will be the greater of the posted range, or minimum wage for the location where the employee will be working, subject to local minimum wage requirements. **About Hussmann** For over a century, Hussmann Corporation has been a global leader in commercial refrigeration equipment - delivering solutions that meet the demands of the modern food retailing industry. Headquartered in St. Louis, MO, Hussmann offers a diverse range of products and connected solutions designed to enhance operational efficiency, optimize visibility of merchandise, and keep food fresh. With a nationwide network of skilled technicians, Hussmann goes beyond manufacturing - a trusted partner, relentlessly driving customer success. For more information about Hussmann, please visit **************** . Hussmann is a subsidiary of Panasonic USA. _Hussmann is proudly committed to creating an inclusive environment. All qualified applicants will receive consideration for employment without regard to veteran status, disability, age, race, color, religion, sex, national origin, genetics, medical condition, or any other characteristic protected by law._ REQ-153243

Temp Cable Technician Smithfield, RI Running, terminating, and testing Cat-6A cable. Installing J-Hooks, punch-downs, etc. Mult-floor office buildings in Smithfield, RI and surrounding area. 6-8 weeks of work For the right candidate this could become an ongoing assignment. NIGHT WORK (6 PM - 4:30 AM). Must be willing/able to work overtime. Candidates must have their own hand tools (Punch down tool, crimper, wire stripper, snips, etc.) PPE gear required.

Milton CAT is seeking an experienced Earthmoving Service Technician. Technicians are responsible for the diagnosis, repair, reconditioning, overhaul and maintenance of customer and company heavy equipment and components. Depending on the location and assignment, the technician will be responsible for some or all the functions and duties listed below. These repairs may require working hours in addition to the normal work schedule for emergency calls or routine service as required. Pay Range: $35.30 to $39.76 per hour based on experience. Responsibilities Removes, disassembles, assembles, and installs components and parts. Identify the problem and cause of failure through logical troubleshooting steps. Determines reusability of parts in accordance with published Caterpillar reusability guidelines. Orders replacement parts ensuring that parts ordered are correct and complete at time of order. Cleans, repairs, reconditions, and maintains equipment and components. Tests, measures, and adjusts engine and machine systems and components. Prepares, inspects and operates machines prior to delivery. Keeps up to date with developments in tooling, technologies and systems. Prepares inspection and appraisal reports. Prepares accurate and complete service reports timely. Maintain a professional and proper personal appearance at all times adhering to company policy. Flexible to work after hours when needed to meet customer needs. Performs related duties as assigned. Qualifications To perform this job successfully an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and ability required. High school diploma or (GED) equivalent. Three years experience as an Earthmoving Shop Technician on heavy equipment. Experience on CAT heavy equipment or similar equipment. Heavy equipment service/maintenance knowledge. Proficient in mechanical systems (transmissions, engines, hydraulics, etc.). Proficient in the use of a computer and related software (Word, Excel, etc.). Strong problem solving skills and be detailed oriented with a high level of accuracy. Strong math skills. Able to lift more than 50 pounds. Ability to perform duties with a sense of urgency, exceeding customer expectations. Ability to work with minimal supervision. Able to work in a dynamic, fast paced service environment. Maintain a tool inventory sufficient to perform assigned tasks. Must have a valid driver's license. Preferred Skills and Competencies Associates degree in a related field is preferred. This job description is not intended to be all-inclusive. Your supervisor may request and assign you similar duties. Resumes that are mailed, emailed or hand-delivered to Milton CAT or any employee will not be considered. You must apply online. A background check and drug test are required as part of our pre-employment process. Milton CAT is an equal opportunity employer that values the strength diversity brings to the workplace. We encourage applications from individuals with disabilities, minorities, veterans, and women. Applicants receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, sexual orientation, gender identity, handicap, disability, veteran status, genetic data, or other legally protected status. We base all employment decisions to further this principle of equal employment opportunity. VEVRAA Federal Contractor. EEO/AA employer. Milton CAT is a Drug-Free workplace.