Service technician jobs in San Antonio, TX - 1,430 jobs

Seeking an experienced Generator Technician to perform preventive and corrective maintenance, troubleshooting, and start-up commissioning on power-generation equipment. This role is hands-on in the field and supports overall service operations through accurate documentation, customer interaction, and technical expertise. Qualifications 4+ years generator technician experience HS diploma required; technical training preferred Strong electrical/mechanical troubleshooting skills Valid driver's license; relevant certifications a plus Strong customer service and communication skills Ability to work independently and progress through skill levels Key Responsibilities Troubleshoot and repair generators (diesel, gas, standby) Perform PMs, load-bank testing, and startup commissioning Provide in-person and field technical support Diagnose electrical/mechanical issues and follow work instructions Document all work clearly and accurately Travel to customer sites; respond to emergency calls as needed Maintain clean driving record and provide own basic tools Follow all safety procedures and PPE requirements

Ameritech Facility Services is searching for Field Technicians If you are in search of a company with great pay excellent benefits and growth potential Ameritech Facility Services is looking for you Ameritech Facility Services is an industry leading provider of renovation solutions for the restaurant and retail industries Earn up to 60000 per year as a Helper Pay potential based on projects completed Earn up to 80000 per year as a Technician Pay potential based on projects completed Ameritech Facility Services is seeking a full time and experienced jack of all trades technicianhandyman willing to travel and assist clients with building repairs Most locations are retail and restaurant customers who need help solving construction related issues; trouble shoot diagnose and repair Ability to build relationships is very important Candidates should have at least 5 years of experience in carpentry with a basic understanding of electrical flooring and plumbing Must be able to pass a background check Basic Skills in the following Trades Minor plumbing connections sink supply and drain lines Minor electrical connections disconnect and reconnect equipment Roofing RepairsConcrete RepairsStucco RepairsFencingAsphalt RepairsCarpet RepairsTile RepairsUse of basic tools and the ability to install or assemble by following instructions Handling projects when needed Heavy lifting standing bending and reaching Most work will be day time fixing commercial buildings Some nights and weekends may be required Ability to manage time and prioritize; must follow special instructions and schedules Effective communication Maintaining a clean and professional appearance Must have the following Commercial Construction Experience 5 years preferably restaurant Ability to travel regionally 50 75Clean driving record and personal transportation Tools drills saws hammers ladders cords shop vac caulking gun etc Specialty tools will be rented concrete saw jackhammer etc Cell phone Good communications skills ability to scan email photos and utilize apps from cell phone Basic computer skills Willingness to learn other skills This is a list of the major responsibilities duties and physical demands required of this position and may not be all inclusive Nothing in this job description restricts the Companys right to assign or reassign duties and responsibilities to this job at any time The company delivers services out of state Travel for work out of state may be necessary We try to distribute those interstate trips to all of the drivers and all drivers are subject to assignment to make those interstate trips Job Type Full time

Classification: Non-Exempt Pay: $28 - $32 We are Alsco Uniforms. We've been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It's our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We're seeking driven professionals with ambition to grow within our company. We'd love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Technician is responsible for installing, repairing and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. This position reports to the Chief Engineer. Our full-time employees enjoy: 401K Plan with Company Match Medical, Dental, Vision, FSA/HSA Life Insurance, Disability Insurance Vacation, Sick Time, Holidays Choice of Global Cash Card or Direct Deposit Career Advancement Learning & Development Opportunities Inclusive and Diverse Team Environment Essential Functions: - Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems. - Troubleshoots electrical issues. - Responds to daily maintenance requests in a timely fashion to minimize equipment downtime. - Provides emergency/unscheduled repairs of production equipment. - Diagnoses problems, replaces or repairs parts, tests and makes adjustments. - Looks for opportunities to continually improve maintenance processes. - Works with all plant personnel in a cooperative and professional manner. - Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry. - Ensures work is performed safely and efficiently. - Maintains technical knowledge by attending educational workshops and reviewing technical publications. Remains current on equipment and repair procedures and best practices. - Studies blueprints and manufacturers' manuals to determine correct operation of machinery. - Proficient in reading electrical schematics. - Maintains accurate and timely records of maintenance performed. - Follows written and verbal instructions and performs other tasks as directed by supervision. - Complies with all Federal, State and local laws. Additional Functions: - May work with and support other branch personnel as required by supervision. - Drive and pick up parts, transport equipment, parts, etc. Qualifications: - Have and maintain a valid driver's license and driving record free of chargeable accidents, speeding or other safety violations. - Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications. - Proficient in the proper use of power and hand tools. - Strong electrical troubleshooting ability of 3 phase 230 volt systems. - PLC programming experience. - Experience in carpentry, boiler repair, welding, and general facility repairs. - Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management - Must be a team player with enthusiasm, initiative, and pride in work well done; self-starter dedicated to continual quality improvement. Education: - High school graduate or equivalency preferred. - Some locations may require relevant certifications, a boiler license or PLC programming. Typical Physical Activity: - Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: - Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: - Occasionally, such as to procure parts. The Maintenance Technician must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Work Hours: 8 a.m. to 5 p.m.Work Schedule: Mon - Fri (On-call rotation) Work Location: 919 Mission Rd., San Antonio, TX 78210 Mission: The mission of Catholic Charities is to provide for the needs of our community through selfless service under the sign of love. Summary: The Maintenance Technician is responsible for up-keeping and maintaining repairs of the agencies buildings, vehicles, grounds and equipment, and other duties as assigned by the Facilities Supervisor. Position Responsibilities: *Complete work orders and process them. Work cooperatively with staff to schedule and complete repairs. *Inspect all buildings and facilities and initiate repairs as needed. *Follow established safety procedures and techniques to perform job duties including lifting and climbing. *Operate tools and equipment according to established safety procedures. *Correct unsafe conditions in work area and promptly report any conditions that are not immediately correctable to supervisor. *Follow established procedures for locking, checking, and safeguarding facilities. Conduct regular inventory of physical equipment and supplies and maintain accurate records. Order tools, equipment, and supplies as needed. *Respond to after-hours emergency calls as needed. *Inspect buildings and other structures to determine functional systems and detect malfunctions and identify items needing repair or replacement. Complete special projects as directed by the facilities director Adhering to safety training and protocols on a daily basis, and taking precautionary measure to ensure the safety and well-being of self, others. Responsible for the general maintenance and repairs of the agency's buildings. This includes, but is not limited to, painting, light fixtures, minor plumbing and carpentry. Responsible for the inspection of our fleet of vehicles, and keeping the stickers current. Other than areas maintained by independent contractors, is responsible for ground maintenance. Move furniture and office equipment as requested Responsible for protecting the confidentiality of any information or material obtained in the service with the organization to include but not limited to client names and information, services rendered to clients, donors names and gifts, internal and external investigations or results of any investigations, and financial information. Must be sensitive to the service population's cultural and socioeconomic characteristics. Adhering to safety training and protocols on a daily basis, and taking precautionary measure to ensure the safety and well-being of self, others. Responsible for protecting the confidentiality of any information or material obtained in the service with the organization to include but not limited to client names and information, services rendered to clients, donors names and gifts, internal and external investigations or results of any investigations, and financial information. Adherence to the Code of Conduct and the Faith and Moral is mandatory. Every employee is required to take a solution-oriented approach in their interactions and undertakings, as well as being a team member that promotes collaboration and commitment to the Mission and Vision of the organization. As a Seton Home employee, attendance and successful completion of a 10-day New Employee Orientation is mandated for the position. The inability to meet this requirement will conclude employment with the Agency. Other duties as assigned by the Director, Sr. Director or other Leadership Member. Competencies Competency Description Communication Ability to effectively share information and ideas of various degree of difficulty and sensitivity through different means of communication and to diverse audiences. (Verbal and/or written) Customer Service Ability to be attentive to the needs of internal and external customers and being able to find resolution within the parameters of set standards and messaging in a positive manner. Integrity / Honesty Ability to conduct self in ways that are in concert with the organization's standard of conduct when advocating for and influencing others, and executing responsibilities. Results Oriented Ability to remain focused on objectives of the organization / program and being able to meet or exceed desired outcomes and deliverables. Requirements Minimum Qualifications: * Education * High School Degree or GED equivalent preferred, but not required. * Experience * Minimum of 1 years' experience in maintenance or related field. License and Credentials Reliable transportation Valid driver license Minimum Knowledge and Skills: Minimum of 1 years' experience in maintenance related work Must be detail oriented, organized, self-motivated, work well independently and on a team; Must have good written and verbal skills; Must have good critical thinking and problem solving skills. Travel Requirements: Travel requirements for the position includes 50% local. Physical Requirements: The position requires the following physical demands in the frequency noted. C = Constantly (2/3 or more of the time) O = Occasionally (Up to 1/3 of the time) F = Frequently (From 1/3 to 2/3 of the time) R = Rarely (less than on hour per week) Physical Demands Frequency Physical Demands Frequency Lifting up to 75 pounds C Reach above shoulder height F Sitting O Reach below shoulder height F Walking F Driving F Running R Stopping P Standing F Pushing F Bending waist (forward or sideways) F Pulling F Balancing F Talking F Squatting F Hearing F Climbing O Crawling R Repetitive motions F Other: Disclaimer: This is not necessarily an exhaustive list of all responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job description or to require that other or different tasks be performed when circumstances change (e.g., emergencies, changes in personnel, workload, etc.) This is a Grant funded position and salary is dependent on funding availability. Position can be eliminated at any time because of lack of funding to support this position. St. PJ's Children's Home is an Equal Opportunity Employer. To view this and other employment opportunities please visit The Archdiocese of San Antonio website at ***************** You must apply through the website and complete the application and upload your resume. No phone calls please. If you are chosen for an interview, you will be contacted. Salary Description $18.00 hourly

AFL manufactures industry-leading fiber optic cable, connectivity and accessories and provides engineering and installation services for some of the largest telecom customers in the world. Our company was founded in 1984 with a single fiber optic cable and today, we manufacture thousands of products, generate an excess of $1B in revenue, and employ more than 5,800 associates worldwide. At AFL, we recognize that our employees are our greatest asset. We hire and train each individual, investing in them to ensure success in their careers. With a commitment to professional development and growth, let us connect you to your next career opportunity. ITC Service Group is a wholly owned subsidiary of AFL. Founded in 1999 and provides managed services and workforce solutions for the nationwide planning design, construction, installation and maintenance of voice, data, and video networks. AFL and ITC were built and are operated on similar core values and philosophies. We recognize that our employees are our greatest asset. We hire and train each individual, investing in them to ensure success in their careers. Let us connect you to your next career opportunity! Job Overview: ITC is looking for motivated individuals to join our fiber splicing team! Experience in the Telecom industry is preferred but not required. We will fully train you to splice fiber optic cable and earn a great income. This includes underground and aerial splicing, as well as running fiber drops for our client. We service both residential and commercial customers. Company Provides: Vehicle, Gas, Cell Phone, Tablet, Uniform Job Requirements: Operate various trenching equipment such as a mini skid steer or walk beside trencher. Capable of carrying, handling, and climbing 28-ft ladders Ability to work at heights: Splicing fiber on utility poles and strands Ability to lift and move up to 100 lbs. Must be able to work flexible hours with the understanding that workdays can be in excess of normal hours and weekend and holiday work may be required. Valid state driver's license and non-negligent driving record. Must pass a pre-employment background check and drug/alcohol screen. Ability to visually perceive differences in wire and cable colors. Ability to complete on-the-job and/or classroom training in order to remain competitive in the telecommunications field. Physical Demands: Work involves standing, talking, hearing, using hands to finger, handle, feel or operate objects, tools, or controls and reaching with hands and arms. Skill in operation of some of the listed tools and equipment; and ability to perform heavy manual tasks for extended periods of time. The employee must frequently push, pull, lift and/or carry up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment: While performing the duties of this job, the employee regularly works in inclement weather conditions. The employee frequently works near moving mechanical parts and is frequently exposed to wet and/or humid conditions and vibration. The employee occasionally works in high, precarious places and is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and risk of electrical shock. #LI-JR1

Why E2 Optics? 💥 Drive Innovation with E2 Optics! 💥 Are you ready to elevate your career with an award-winning, Woman-Owned technology integrator that's leading the charge in the data center revolution? E2 Optics is one of the fastest-growing and most stable companies at the core of the tech industry-powering the infrastructure behind AI, cloud computing, and the innovations of tomorrow. At E2 Optics, you will work with cutting-edge systems in some of the most advanced environments in the world. We invest in your growth through hands-on experience, industry certifications, and leadership opportunities that put you in charge of teams and outcomes. Collaboration is in our DNA - we believe in lifting each other up, mentoring with purpose, and celebrating every win. If you are looking to be part of something meaningful, fast-moving, and future-focused, your next opportunity is here. Join one of America's largest and fastest-growing tech integrators and help us shape what's next. What You'll Do Safety is E2 Optics' number one Core Value. All employees are expected to follow safe work practices, as well as adhere to company and client worksite safety policies and procedures. Follow safe work practices and company and client work site policies. Reads and understands splice records and can effectively splice fibers in accordance with those records. Assist the project team with installation activities as needed. Terminate and Breakout outside fiber. Pull and splice OSP high-count fiber optic cables. Proactively maintain job site organization and basic housekeeping. Organize materials, tools, and equipment, collect debris, and ensure hazardous conditions are promptly addressed. Read and interpret floor plans, drawings, specifications, and cut sheets. Know about the different materials and methodologies involved with the installation of a structured cabling system. Furcate large strand count fiber(3456-6912). Perform break fixes, troubleshoot, and read splice records and blueprints. Understand a task and ask relevant questions before beginning to complete it. Maintain compliance with customer security requirements. Exhibit and maintain professional appearance and behavior. This position is generally expected to require minimal overnight travel (5%) in certain regions, could require frequent (50%+) overnight and extended out-of-town travel in others. The individual in this role should be able and willing to travel as required by E2 Optics. Additional Responsibilities: As identified and assigned. What We Are Looking For High school diploma or GED required OSHA 30 within first 2 weeks in role BICSI Installer 2 Fiber certification preferred. Must be earned once hired, (to qualify for Tech III) 3+ years work experience in Structured Cabling, Installing, Terminating, and Splicing Minimum 1 year work experience in a fiber splicing role or industry related construction Single and Ribbon Fiber splicing experience required Experience with ISP and OSP Read, write, and understand English Able to distinguish color codes with the ability to read blueprints and schematics Basic computer skills and knowledge of Windows based programs EXFO OTDR knowledge and EXFO OLTS testing knowledge Ability to listen carefully to and follow instructions Demonstrated ability to be proactive, dependable and exercise efficient time management at the jobsite Demonstrate accountability for safety, quality, and productivity Exhibit a positive attitude Solid team player High attention to detail with demonstrated ability to source and follow standards Ability to meet deadlines Willingness to work days, nights and weekends as project requires Self-motivated with excellent work ethic Ability to work effectively in versatile work environments What We Offer Competitive pay Opportunities for professional development and career growth BICSI training facilities A supportive and inclusive work environment Health, dental, and vision insurance Paid time off and holidays Work Environment and Physical Demands The standard work environment for this position is an indoors business office and construction environment. The noise level in the work environment is usually moderate. While performing the duties of this job, the employee is regularly required to sit, talk or hear, use hands, stoop, kneel, reach with hands and arms, and talk or hear. The employee is frequently required to stand and walk. The employee must regularly lift and/or move up to 50 pounds and frequently lift and/or move up to 25 pounds. The employee must regularly carry and climb ladders to 20 feet. Must be able to operate equipment such as scissor lifts, telehandlers, boom lifts, and UTVs (buggies) if required to do so. The employee may also be required to work in tight, confined spaces. The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. When possible, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Disclaimer The above job definition information has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Job duties and responsibilities are subject to change based on changing business needs and conditions.

TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Fiber Splicer to join our team in San Antonio, TX. In this role you will complete installation, repair and testing of fiber and the different components, splice loose tube and ribbon fiber in compliance with modern standards and connect and configure fiber optic networks for facilities while troubleshooting problems. Why TAK? * Full Time * Paid Weekly * Compensation: $20 - $36 per hour, DOE * Full Benefits Package (Medical, Dental & Vision) * Paid Time Off * 401(k) with Company Match! * 25K Company Paid Life Insurance * Independent Work & Team Collaboration * Career Development & Advancement Opportunities! The Role * Complete installation, repairs and testing of fiber and the different components * Splice loose tube and ribbon fiber in compliance with modern standards * Connect and configure fiber optic networks for facilities while troubleshooting problems * Read splicing print and apply color code to print reading * Test, activate, and troubleshoot equipment after installation * Basic daily maintenance of TAK provided vehicle: check fluids, clean and organize vehicle * Ongoing monitoring to ensure that splicing operations are completed according to customer and industry specifications * Safely operate and use a bucket truck to complete daily construction assignments, and pull the fiber trailer as needed * Complete daily production reports, mark-up maps, keep track of work hours, complete "as-built maps" for areas built and tracks daily production * Reconcile all issued parts and materials daily to ensure accurate material usage counts * Frequently works with minimal or no supervision * Perform general clean up * Other duties as assigned Requirements * Prior fiber splicing experience required * Prior experience with CWDM and DWDM, prepping & splicing from 6ct to 288ct, and a working knowledge of OTDR (VEeX and/or EXFO) and the Fijukura Fiber Splicer a plus * Ability to work outside of business hours when needed, overtime, holidays, evenings, weekends etc., in all seasons * Ability to safely operate a vehicle while pulling a trailer * Ability to complete tasks with small components and wires * Ability to judge distance and space relationships * Ability to interpret splicing print and distinguish/apply color code to print reading * Ability to use specialty tools * Ability to use and understand splicing technology such as OTDRs, VFL, OLTS and Fusion Splice * Ability to carry, climb, operate, and work upon an extension ladder (approximately 28 feet high and 75 pounds) * Ability to complete work outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time * Ability to safely work and navigate various terrains, managing equipment, safety equipment and tools * A body weight of no more than 275 pounds to perform ladder work safely. Safety is our #1 Priority. If personal safety is not compromised, an accommodation may be available based on previous ladder experience in a similar role * Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving * Class A CDL preferred * Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting *****************************. Salary Description $20 - $36 per hour, DOE

Hobart Service, an Illinois Tool Works Company, has been in business for over 125 years and is the trusted source for Commercial Food Equipment Service Solutions. We have over 1,700 associates nationwide who serve as valued partners to our customers. Our employees are dedicated to providing the best customer service, give back to the communities where they live and work, and demonstrate the ITW values of Integrity, Simplicity, Trust, Respect and Shared Risk. Job Description These are the most significant job duties performed. The size, scope and complexity of assigned duties and responsibilities are dependent on the level and experience of the incumbent. To perform this job successfully, an individual must be able to perform each assigned essential duty satisfactorily. Other responsibilities or special projects not specifically listed below may also be assigned. Entering and managing installation opportunities in CRM to develop accurate monthly forecasts Conducting site installation surveys to collect necessary information for install feasibility and planning the execution in CRM Producing scope of works and customer facing installation quotes in CRM Working with dispatchers and other branch personnel to schedule installs in Microsoft Field Service adhering to promise dates for customers Executing the installation per the scope of work to customer satisfaction and by adhering to safety manuals and programs Strong adherence to installation playbook from start to end (machine at customer site to leaving customer site after successful startup) Effective management of installation request inbox Strong project management skills by managing schedule dates and completion dates in CRM and information relayed to the customer and to other branch leadership personnel Proper final pricing updates to CRM opportunities that support branch and organization financial objectives Maintains current organization, industry, and equipment knowledge. Strong communication with customers on overall Hobart Service value propositions for future service products after warranty expires for new machine Proper vehicle maintenance and handling of installation material handling equipment Adherence to the company's safe driving policy and other applicable policies including safety Other duties as assigned Supervisory Responsibilities This position has no direct or indirect supervisory responsibilities. Qualifications The requirements listed below are representative of the knowledge, skill, and/or ability required to perform this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required Education and Work Experience High school diploma or GED 2 years of formal technical training and at least ten years of related experience Equipment installation or similar experience PC knowledge and suite of Microsoft applications Desired Education/Experience 5+ years of installation experience in commercial equipment Mechanical or electrical experience is preferred, but not required Associate degree is preferred, but not required Experience installing and removing commercial cooking and/or refrigeration equipment is highly desirable Prior experience using Microsoft Dynamics 365 CRM Certificates and Licenses Position/Location dependent Industry certification is highly desirable COMPETENCIES To perform the job successfully, an individual should demonstrate the following competencies. Technical and Analytical Skills Ability to read and interpret standard service manuals, installation manuals, and mechanical diagrams. Understanding of basic math (addition, subtraction, multiplication, division, calculations of percentages, measurement conversions). Compiles and summarizes data for supervisor and/or branch manager that will help him/her with creating customer-focused strategies for fostering relationships and sales (e.g., equipment leads, contract leads, water treatment order leads). Basic knowledge of / working knowledge of Windows applications and Microsoft Office programs such as Word and Excel. Quality Demonstrates accuracy and thoroughness. Looks for ways to improve and promote quality. Applies feedback to improve performance. Monitors own work to ensure quality. Quantity Completes work in timely manner. Strives to increase productivity. Works quickly. Attendance/Punctuality Is consistently at work and on time. Ensures work responsibilities are covered when absent. Arrives at meetings and appointments on time. Attendance/Punctuality Is consistently at work and on time. Ensures work responsibilities are covered when absent. Arrives at meetings and appointments on time. Dependability Follows instructions, responds to management direction. Takes responsibility for own actions. Teamwork Balances team and individual responsibilities. Exhibits objectivity and openness to others' views. Gives and welcomes feedback. Contributes to building a positive team spirit. Puts success of team above own interests. Able to build morale and group commitments to goals and objectives. Supports everyone's efforts to succeed. Recognizes accomplishments of other team members. Keep commitments. Commits to extended hours of work when necessary to reach goals. Completes tasks on time. Safety Ability to read and understand safety guidelines of the business. Ability to approach job responsibilities with an emphasis on safety, efficiency, and quality. Performs periodic visual safety inspections of vehicle and equipment, reports vehicle and tool defects and takes them out of service until repairs are made or items replaced. Demonstrates a comprehensive knowledge of company products and services. Time Management and Communication Skills Prioritizes regular workload, special tasks and concurrent projects, allocating time and resources to ensure that work is completed accurately and efficiently within the established time frame. Must be able to multi-task; work on site visits, compose quotes and lead an installation crew Demonstrated ability to communicate orally with individuals from within and outside the organization Demonstrates crisis/conflict resolution skills Ability to self-motivate and take direction from management Thrives in a multi-tasking environment and can adjust priorities quickly Timely customer communication on installation updates PHYSICAL DEMANDS & WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands While performing the duties of this Job, the employee may: Lift up to 75 lbs. with or without assistance Climb up to 10 ft with an A-frame ladder Occasional roof access may be necessary through extension ladders or fixed ladders greater than 20 feet Extensive walking 3-5 miles / day Extensive driving 5-6 hours/day Kneel, squat, bend, push/pull Move in various positions to accomplish tasks in various environments including tight and confined spaces Operate motor vehicles or heavy equipment (i.e., forklift) Operate machinery and/or power tools Working Conditions Office facility and customer facilities (including commercial kitchens of various types of businesses) Exposure to noise, heat, cold, slippery, wet dirty conditions may occur Travel requirement up to 50% of time Hours of Work Normal business hours with occasional/frequent/extended hours as needed Flexibility with schedule to meet critical deadlines Normal scheduled hours cover early mornings, evenings and/or weekends Extended hours may include nights and/or weekends About Us: Hobart Service, an Illinois Tool Works Company, has been in business for over 125 years and is the trusted source for Commercial Food Equipment Service Solutions. We have over 1,700 associates nationwide who serve as valued partners to our customers. Our employees are dedicated to providing the best customer service, give back to the communities where they live and work, and demonstrate the ITW values of Integrity, Simplicity, Trust, and Respect. We offer a competitive salary and benefits package including medical, dental, and life insurance, short and long-term disability benefits, holiday and vacation pay, 401(k) with liberal matching funds, and educational reimbursement. Hobart Service is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. ITW and Hobart Service are committed to providing a healthy and safe environment for all employees. To demonstrate this commitment, Hobart Service is tobacco-free (including e-cigarettes) on campuses and within company vehicles and maintains a drug-free workplace. If you are a qualified individual with a disability and are unable or limited in your ability to use or access the online application system process due to your disability, please contact Human Resources at **************************** to request assistance. No other requests will be acknowledged. ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws. ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.

Job DescriptionBenefits: 401(k) matching Competitive salary Opportunity for advancement Vision insurance Run service calls and perform maintenance on a wide variety of primarily commercial and industrial HVAC equipment. Assist with troubleshooting problem jobs, and service procedures. Some estimating, and customer relations. Excellent "people skills" is imperative.

TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a **Fiber Splicer** to join our team in **San Antonio, TX** . In this role you will complete installation, repair and testing of fiber and the different components, splice loose tube and ribbon fiber in compliance with modern standards and connect and configure fiber optic networks for facilities while troubleshooting problems. **Why TAK?** + Full Time + Paid Weekly + **Compensation: $20 - $36 per hour, DOE** + Full Benefits Package (Medical, Dental & Vision) + Paid Time Off + 401(k) with Company Match! + 25K Company Paid Life Insurance + Independent Work & Team Collaboration + Career Development & Advancement Opportunities! **The Role** + Complete installation, repairs and testing of fiber and the different components + Splice loose tube and ribbon fiber in compliance with modern standards + Connect and configure fiber optic networks for facilities while troubleshooting problems + Read splicing print and apply color code to print reading + Test, activate, and troubleshoot equipment after installation + Basic daily maintenance of TAK provided vehicle: check fluids, clean and organize vehicle + Ongoing monitoring to ensure that splicing operations are completed according to customer and industry specifications + Safely operate and use a bucket truck to complete daily construction assignments, and pull the fiber trailer as needed + Complete daily production reports, mark-up maps, keep track of work hours, complete "as-built maps" for areas built and tracks daily production + Reconcile all issued parts and materials daily to ensure accurate material usage counts + Frequently works with minimal or no supervision + Perform general clean up + Other duties as assigned Requirements + Prior fiber splicing experience required + Prior experience with CWDM and DWDM, prepping & splicing from 6ct to 288ct, and a working knowledge of OTDR (VEeX and/or EXFO) and the Fijukura Fiber Splicer a plus + Ability to work outside of business hours when needed, overtime, holidays, evenings, weekends etc., in all seasons + Ability to safely operate a vehicle while pulling a trailer + Ability to complete tasks with small components and wires + Ability to judge distance and space relationships + Ability to interpret splicing print and distinguish/apply color code to print reading + Ability to use specialty tools + Ability to use and understand splicing technology such as OTDRs, VFL, OLTS and Fusion Splice + Ability to carry, climb, operate, and work upon an extension ladder (approximately 28 feet high and 75 pounds) + Ability to complete work outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time + Ability to safely work and navigate various terrains, managing equipment, safety equipment and tools + A body weight of no more than 275 pounds to perform ladder work safely. **Safety is our #1 Priority. If personal safety is not compromised, an accommodation may be available based on previous ladder experience in a similar role** + Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving + Class A CDL preferred + Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) _The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law._ _TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting *****************************._ Salary Description $20 - $36 per hour, DOE

Benefits: Company car Competitive salary Free uniforms Opportunity for advancement Training & development Role: Lead Home Service Technician in Canyon Lake, TX TruBlue Home Service Ally is a national franchise with over 120 locations that provides trusted handyman repairs, home safety upgrades, and maintenance services to help seniors age in place and support busy families. With locations across the U.S., TruBlue is a leader in dependable, relationship-based home maintenance. This is a role for a skilled professional who leads by example, brings out the best in others, and takes pride in work that makes a real difference. What You'll Do Perform high-quality home maintenance and repair projects Lead, coach, and support a team of Tru-Pro technicians Uphold TruBlue's high standard of professionalism, reliability, and customer care Communicate clearly with customers and help manage expectations on-site Ensure safety, accuracy, and consistency across every project Common projects include: Bathroom and kitchen upgrades Drywall repair and patching Flooring installation and repair General carpentry Interior and exterior painting Basic plumbing and electrical (within scope) Who You Are 10+ years of hands-on home repair or construction experience Experience managing or mentoring other technicians is preferred Strong communication and problem-solving skills Committed to doing the job right and doing right by your team and clients Valid driver's license, reliable transportation, and full toolset Fluent in English and legally authorized to work in the U.S. What You'll Get Year-round, consistent work Reliable hours and flexible scheduling Company vehicle and TruBlue gear (varies by location) Strong office and leadership support A team culture built on compassion, trust, and professionalism A leadership role with room to grow Why TruBlue We're a company with a purpose: to make homes safer and lives easier. You'll be joining a team that supports you, respects your expertise, and values the role you play in helping customers live better at home. All locations are independently owned and operated. Service offerings, certifications, and licenses vary by location. T.B. Franchising Systems, Inc. is not affiliated, connected or associated with TruPros International, Inc. or any of its services. All inquiries specific to employment at this location should be made directly to the franchise location, and not to TruBlue Home Service Ally Corporate office."

As a Poolie Pool Repair Tech, you will be a vital part of our growing pool service company, contributing to our mission of providing exceptional service and repairs to our customers. Your expertise will not only ensure accurate diagnostics and high-quality repairs but will also position you as a mentor to help train and support technicians. With your skills and customer-focused mindset, you will help us maintain excellence and achieve customer satisfaction while playing an integral role in our team's growth and success. Responsibilities: Diagnostics and Repairs: Identify, troubleshoot, and perform repairs on a variety of pool systems and equipment to maintain operational excellence and ensure long-lasting functionality. High-Quality Quotes: Provide clear, detailed, and high-quality repair quotes focused on making pools run efficiently, adhering to current safety standards, and utilizing reputable products with solid warranties. Your quotes should reflect our commitment to excellence and provide customers with confidence in their investments. Customer Communication: Before Service: Communicate with customers ahead of your arrival to confirm the appointment, share your expected arrival time, and address any preliminary questions. During Service: Keep customers informed throughout the troubleshooting process, explaining the issues and recommended solutions clearly and professionally. After Service: Follow up with customers after repairs to ensure satisfaction, address any additional concerns, and provide quotes for further potential work that could improve their pool systems. Maintain open communication to foster trust and long-term relationships. Internal Team Communication: Actively participate in team communication via Slack to ensure seamless collaboration. Share updates on ongoing repairs, ask for or provide troubleshooting support, and communicate relevant details with other technicians and team leaders to maintain operational efficiency. Quality Assurance: Deliver exceptional service and attention to detail to ensure repairs meet or exceed customer expectations, fostering long-term satisfaction. When quality control issues do arise, handle them as a top priority by addressing the problem promptly, communicating openly with customers, and implementing immediate solutions to resolve concerns. Ensure follow-up actions are taken to prevent recurrence and maintain trust in our commitment to excellence. Customer Service: Represent the company professionally by maintaining a customer-first mindset, effectively addressing any service-related concerns, and providing solutions that align with our quality standards. Team Collaboration: Work closely with the service team to support daily operations, share knowledge, and contribute to a collaborative, team-focused work environment. Requirements Qualifications: Previous experience in pool service and repairs is required. Residential Appliance Installer License (RAIL) preferred. Valid driver's license. Ability to handle a physically demanding workload. A great team-player attitude with the flexibility to wear multiple hats. Strong customer service mindset and communication skills. Desire to be part of a fast-growing, dynamic team. Benefits: Medical, Vision, and Dental Insurance Short and Long Term disability paid for by company Employee Assistance Programs for mental health and wellness Paid Time Off 10 Company Holidays Training and Development Opportunities Employee Purpose Plan Schedule: In Office- at Branch 8:00 am-5:00 pm Monday - Friday

Innovation has guided our every decision since 1974. As more riders of all ages get on the roads, trails, and streets than ever before, we're here to do the best work of our lives to push the greatest human powered machine into the future each and every day. We're a team of barrier-breakers, disrupters, and problem solvers. We're committed to building a diverse and inclusive workforce where every teammate can succeed as we inspire riders everywhere. In Company Owned Retailed, we strive to be a transformative, inclusive, authentic, rider focused, and collaborative team that creates the best bikes and delivers world class rider care attention. Simply said, we provide quality in our products and to our riders at every interaction and are looking for a teammate to be a part of this growing team. Reach out - we're here to help you build your career at Specialized. JOB SUMMARY A Service Technician is the front line and point person for our brand to the rider and encourages successful, profitable retail by taking their technical expertise to the next level as a driver of outstanding in store brand experiences. A Service Technician works directly with riders, both present and remote, to identify and locate the goods, services, and experiences needed to provide solutions quickly and frictionlessly to keep them riding longer and better. Service Technicians work collaboratively and hands-on with staff and local riders as a host, mentor, brand advocate, and technical service ace. The Service Technician provides exceptional rider service; enhances rider satisfaction; and aids in meeting sales and profitability goals. HOW YOU'LL MAKE A DIFFERENCE * Meeting and making a connection with riders, asking qualifying questions and listening to riders' needs, then giving options and advice on meeting those needs from a pre-set service menu or tune ups and a la cart service. * Speak authoritatively on technical matters as they relate and pertain to our bicycles; be the expert * Assists customers in an enthusiastic and courteous manner; provides "wow" customer service. * Responsible for properly taking in all service work and setting and exceeding rider expectations, including correctly filling out service work orders, scheduling an appropriate number of repairs * Advises and assists customers with their product/service selection without bias. * Develops and maintains knowledge expertise of all merchandise in department to effectively assist customers with accurate information; keeps current as new product lines are introduced. * Assists with bike sales with technical consulting, and any other bike floor duties as needed. * Deliver best in class rider-service that ensures ongoing service and high levels of rider satisfaction * General cleanliness standards are set at store opening, maintained throughout the day, and reset at close of business, including light janitorial duty * Proficiency in Lightspeed point of sale systems and store operational websites * Regular, dependable attendance and punctuality WHAT YOU NEED TO WIN * Passion for cycling and the Specialized brand * Bike shop / Bike mechanic experience preferred * Excellent communication with the ability to effectively interact with riders and team members * Must be able to work as business dictates which includes weekends * Ability to stand for extensive time periods; while occasionally walking, kneeling, or reaching * Able to lift at least 50 lbs. or more and use proper lifting skills TELL ME MORE * Competitive health care (Medical PPO or HDHP)* * Dental* * Vision* * Health Savings Account (HSA) * Short and Long Term Disability * Company sponsored life insurance * Optional Term Life Insurance * Optional Critical Illness insurance * Optional Critical Accident insurance * Competitive vacation package* * 401(k) with match * 8 Weeks paid parental leave * Paid company holidays * Employee discounts on all product * Deep partner retail discounts * Fitness & Events Reimbursement * Employee Assistance Program * Commuter Benefits *if applicable in state * For eligible employees Here at Specialized we believe that bikes have the power to change lives. Our culture is one of passion, striving to break barriers and have a positive impact on the world. We want to increase representation of all races, genders, and body types in the cycling industry and are committed to building a diverse and inclusive workforce where all people thrive. We encourage everyone - especially those from marginalized groups - to apply to our job postings and help us earn the position as the rider's brand of choice. We are always looking for creative, innovative, and passionate people who are eager to contribute to our mission of pedaling the planet forward. Regardless of your qualifications, if you are ready to make a difference, please apply and let us know how you can make an impact at Specialized! See what we are up to on LinkedIn, Instagram, and most importantly, our #DogsofSpecialized.

ABOUT SPECIALIZED Innovation has guided our every decision since 1974. As more riders of all ages get on the roads, trails, and streets than ever before, we're here to do the best work of our lives to push the greatest human powered machine into the future each and every day. We're a team of barrier-breakers, disrupters, and problem solvers. We're committed to building a diverse and inclusive workforce where every teammate can succeed as we inspire riders everywhere. In Company Owned Retailed, we strive to be a transformative, inclusive, authentic, rider focused, and collaborative team that creates the best bikes and delivers world class rider care attention. Simply said, we provide quality in our products and to our riders at every interaction and are looking for a teammate to be a part of this growing team. Reach out - we're here to help you build your career at Specialized. JOB SUMMARY A Service Technician is the front line and point person for our brand to the rider and encourages successful, profitable retail by taking their technical expertise to the next level as a driver of outstanding in store brand experiences. A Service Technician works directly with riders, both present and remote, to identify and locate the goods, services, and experiences needed to provide solutions quickly and frictionlessly to keep them riding longer and better. Service Technicians work collaboratively and hands-on with staff and local riders as a host, mentor, brand advocate, and technical service ace. The Service Technician provides exceptional rider service; enhances rider satisfaction; and aids in meeting sales and profitability goals. HOW YOU'LL MAKE A DIFFERENCE Meeting and making a connection with riders, asking qualifying questions and listening to riders' needs, then giving options and advice on meeting those needs from a pre-set service menu or tune ups and a la cart service. Speak authoritatively on technical matters as they relate and pertain to our bicycles; be the expert Assists customers in an enthusiastic and courteous manner; provides “wow” customer service. Responsible for properly taking in all service work and setting and exceeding rider expectations, including correctly filling out service work orders, scheduling an appropriate number of repairs Advises and assists customers with their product/service selection without bias. Develops and maintains knowledge expertise of all merchandise in department to effectively assist customers with accurate information; keeps current as new product lines are introduced. Assists with bike sales with technical consulting, and any other bike floor duties as needed. Deliver best in class rider-service that ensures ongoing service and high levels of rider satisfaction General cleanliness standards are set at store opening, maintained throughout the day, and reset at close of business, including light janitorial duty Proficiency in Lightspeed point of sale systems and store operational websites Regular, dependable attendance and punctuality WHAT YOU NEED TO WIN Passion for cycling and the Specialized brand Bike shop / Bike mechanic experience preferred Excellent communication with the ability to effectively interact with riders and team members Must be able to work as business dictates which includes weekends Ability to stand for extensive time periods; while occasionally walking, kneeling, or reaching Able to lift at least 50 lbs. or more and use proper lifting skills TELL ME MORE Competitive health care (Medical PPO or HDHP)* Dental* Vision* Health Savings Account (HSA) Short and Long Term Disability Company sponsored life insurance Optional Term Life Insurance Optional Critical Illness insurance Optional Critical Accident insurance Competitive vacation package* 401(k) with match 8 Weeks paid parental leave Paid company holidays Employee discounts on all product Deep partner retail discounts Fitness & Events Reimbursement Employee Assistance Program Commuter Benefits *if applicable in state *For eligible employees Here at Specialized we believe that bikes have the power to change lives. Our culture is one of passion, striving to break barriers and have a positive impact on the world. We want to increase representation of all races, genders, and body types in the cycling industry and are committed to building a diverse and inclusive workforce where all people thrive. We encourage everyone - especially those from marginalized groups - to apply to our job postings and help us earn the position as the rider's brand of choice. We are always looking for creative, innovative, and passionate people who are eager to contribute to our mission of pedaling the planet forward. Regardless of your qualifications, if you are ready to make a difference, please apply and let us know how you can make an impact at Specialized! See what we are up to on LinkedIn , Instagram , and most importantly, our # DogsofSpecialized .

The Ultra Care Technician I is responsible for performing regularly scheduled maintenance of industrial batteries and related products at the client site.

Benefits: Company car Competitive salary Free uniforms Opportunity for advancement Training & development Role: Lead Home Service Technician in Canyon Lake, TX TruBlue Home Service Ally is a national franchise with over 120 locations that provides trusted handyman repairs, home safety upgrades, and maintenance services to help seniors age in place and support busy families. With locations across the U.S., TruBlue is a leader in dependable, relationship-based home maintenance. This is a role for a skilled professional who leads by example, brings out the best in others, and takes pride in work that makes a real difference. What You'll Do Perform high-quality home maintenance and repair projects Lead, coach, and support a team of Tru-Pro technicians Uphold TruBlue's high standard of professionalism, reliability, and customer care Communicate clearly with customers and help manage expectations on-site Ensure safety, accuracy, and consistency across every project Common projects include: Bathroom and kitchen upgrades Drywall repair and patching Flooring installation and repair General carpentry Interior and exterior painting Basic plumbing and electrical (within scope) Who You Are 10+ years of hands-on home repair or construction experience Experience managing or mentoring other technicians is preferred Strong communication and problem-solving skills Committed to doing the job right and doing right by your team and clients Valid driver's license, reliable transportation, and full toolset Fluent in English and legally authorized to work in the U.S. What You'll Get Year-round, consistent work Reliable hours and flexible scheduling Company vehicle and TruBlue gear (varies by location) Strong office and leadership support A team culture built on compassion, trust, and professionalism A leadership role with room to grow Why TruBlue We're a company with a purpose: to make homes safer and lives easier. You'll be joining a team that supports you, respects your expertise, and values the role you play in helping customers live better at home. Compensation: $28.00 - $32.00 per hour TruBlue Home Service Ally ️ provides a unique and affordable approach to helping busy adults and seniors live a worry-free life by offering trustworthy handyman, home maintenance and senior modification services. Helping you maintain your home both inside and out, TruBlue's services include: handyman projects and to-do list chores, preventative home maintenance programs, seasonal work, and senior modification services, all handled by a professional and insured Tru-Pro ️ Technician. Thank you for considering a position with TruBlue. All locations are independently owned and operated. Service offerings, certifications, and licenses vary by location. T.B. Franchising Systems, Inc. is not affiliated, connected or associated with TruPros International, Inc. or any of its services. All inquiries specific to employment at this location should be made directly to the franchise location, and not to TruBlue Home Service Ally Corporate office.

At PPV, an MCE Company, we're growing - and we're hiring a Valve Technician to help us grow even further! Performs maintenance, repair, and testing of various valves, including relief valves, control valves, tank vents, etc. Follow safety and quality procedures Cleaning, blasting, and painting of various valve components Operate equipment blaster, parts washer, torch, forklift, and other related equipment Performs re-machining or lapping of critical parts Perform field work as needed Qualifications Required Skills/ Abilities Must be able to read measuring devices Must be able to document and enter job data Strong mechanical aptitude Demonstrate problem-solving skills Physical Requirements The physical requirements for this position are typical for a mobile employee including constant movement within a wide range of office environments, climbing, standing, reaching, bending, kneeling, stooping and lifting 50+ pounds. Benefits Along with competitive compensation and career advancement opportunities, we offer a comprehensive total rewards package. Qualifying employees receive: Medical, dental, and vision coverage. Company paid life and AD&D coverage. Company paid short- and long-term disability coverage. Voluntary benefit products. 401(k) retirement savings plan with a generous company match. Generous PTO allowances and paid holidays. Tuition reimbursement. Parental Leave Who we are: Motion & Control Enterprises (MCE) provides custom, innovative solutions for automation, engineered systems, fluid power, compressed air, flow control, lubrication, and instrumentation challenges. The Hourly Rate for This Position Is Min $20.00 - Max $30.00 Factors which may affect starting pay within this range may include geography/market, skills, education, experience, and other qualifications of the successful candidate. If this is a commission eligible position the commission eligibility will be in accordance with the terms of the Company's plan. Motion & Control Enterprise, LLC. is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Calls on customers as assigned by Service Manager or General Manager to investigate operating difficulties of equipment. - Diagnoses problems and determines reasons and the nature of correction. - Makes repairs or adjustments to equipment to return t Service Technician, Service Tech, Technician, Service Manager, Senior, Equipment, Retail

Benefits: Bonus based on performance Company car Competitive salary Flexible schedule Free uniforms Training & development [OPTIONAL] ***$XXX sign-on bonus after a 90-day probationary period. *** Role: Lead Home Service Technician / Handyman / Carpenter We provide: Year-round stable, steady work Regular work hours Flexible scheduling Company van and cover related expenses such as gas, oil changes, etc. *varies by location TruBlue t-shirts, polos, and other company gear for the team Strong office support TruBlue of Hill Country is a Home Ally Service company dedicated to providing premium handyman services with bonded and insured technicians, giving our customers peace of mind. Our mission is to help people maintain the safety and value of their homes by offering handyman services, home assessments, and regular maintenance We are searching for a reliable lead home technician (handyman/handywoman) to provide general home services to our customers in our community AND lead a group of technicians who will report to you. If you have 10 or more years of paid experience in general carpentry and handyman work, we want to hear from you. We are looking for a seasoned Team Leader with the following experience: Bathroom upgrades / remodel Drywall repair / patching/ caulking Flooring repair and installation General carpentry / framing / Decks General home repairs and handyman work Kitchen repair / remodel Minor plumbing and electrical Painting interior and exterior What we value: FAMILY - Why else are we in this business? It is our most important asset, and we strive to make everyone feel like they are part of our family! INTEGRITY - Treating people with respect and looking for the same in return, everyone has a voice! TRUST - Achieved through reliability and credibility, cannot just talk it, ya gotta walk it too! QUALITY - Taking pride in one's work and providing the best value and customer experience possible, they will not always remember the work that was done, but they will remember you! The appropriate candidate for the Lead Technician/Handyman position will be proficient in miscellaneous around-the-house type repairs like carpentry, basic plumbing, drywall, painting, and basic electrical. Candidates do not need to be licensed tradesmen, but those candidates are welcome to apply. Qualified candidates will need a driver's license, a reliable vehicle, and standard tools. Candidate must also be a legal citizen of the US, and speak fluent English We are actively interviewing for this position - if you have the skills we're looking for, apply today, and our hiring manager will follow up! Compensation: $28.00 - $30.00 per hour TruBlue Home Service Ally ️ provides a unique and affordable approach to helping busy adults and seniors live a worry-free life by offering trustworthy handyman, home maintenance and senior modification services. Helping you maintain your home both inside and out, TruBlue's services include: handyman projects and to-do list chores, preventative home maintenance programs, seasonal work, and senior modification services, all handled by a professional and insured Tru-Pro ️ Technician. Thank you for considering a position with TruBlue. All locations are independently owned and operated. Service offerings, certifications, and licenses vary by location. T.B. Franchising Systems, Inc. is not affiliated, connected or associated with TruPros International, Inc. or any of its services. All inquiries specific to employment at this location should be made directly to the franchise location, and not to TruBlue Home Service Ally Corporate office.