Service technician jobs in Schaumburg, IL - 7,112 jobs

Min USD $15.50/Hr. Max USD $21.44/Hr. Join Our Team at Springfield Memorial Hospital! Are you looking for a meaningful role where you can make a difference every day? As an Environmental Services Technician, you'll play an essential part in maintaining a clean, safe, and welcoming environment for our patients, visitors, and staff. In this role, you'll be responsible for daily cleaning and restocking throughout the hospital and its facilities, following the standards set by our Environmental Services and Infection Prevention and Control departments. These positions do require an every-other-weekend commitment as part of our regular scheduling. We currently have multiple shifts available. (Openings are reviewed regularly based on the needs of the department and are subject to change.) Qualifications Education: High school diploma or equivalent preferred. Other Knowledge/Skills/Abilities: Ability to lift objects and climb ladders. Moderate physical effort required. Responsibilities Understands how soiling occurs and the difference between soluble and insoluble soils, and the cleaning process involved. Maintains a clean, stocked, and organized cleaning cart and Environmental Services closet per department policy. Knowledgeable about the specific use of Environmental Services chemicals and their dilution rates. Performs dust mopping and wet/microfiber mopping on hard surface floors. Vacuums carpeted areas using an upright vacuum cleaner. Handles and disposes of all waste streams, including regulated waste in the hospital. Cleans and handles intravenous pumps (IV or Sigma Smart Pumps). Cleans in-patient rooms daily. Implements A.I.D.E.T. (Acknowledge, Introduce, Duration, Explanation, Thank You) and Greet and Feet techniques, understanding their impact on patient surveys. Performs discharge and transfer cleaning in both in-patient and out-patient settings. Follows isolation cleaning procedures, using appropriate Personal Protective Equipment (PPE). Responsible for cleaning offices, conference rooms, and furniture arrangement. Proficient in cleaning procedures for laboratory settings. Routinely cleans public and non-public restrooms and locker rooms. Conducts between-case and terminal cleaning in special procedure areas. Cleans the pharmacy clean (IV) room. Reports facility repair issues (e.g., wall patching, ceiling tiles, leaks) to leadership and submits work orders as needed. Maintains all equipment (cleaning carts, vacuums, pagers) following department guidelines. Performs general maintenance of hard and soft flooring. Adheres to safety procedures with chemicals and equipment use; reports discrepancies. Reports injuries to leadership and submits appropriate injury reports. Completes all duties proficiently and within designated time frames. Participates in required training, meetings, and completes annual learning modules on time. Familiar with departmental policies and procedures, monitoring communication boards. Performs other related work as required or requested.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Extensive travel required. (Local, National) · Promotes and adheres to the ATS safety culture. · Engages in various work environments and industries to lead reliability centered maintenance efforts. · Mentors, coaches, and provides reliability best practices for applications in customer facilities, by customer personnel · Identifies top potential issues leading to lost production and preventable maintenance spending. Communicates findings with leadership. · Provides solutions to root cause deficiencies and demonstrates economic benefits to their correction. · Actively drives the implementation of equipment improvement projects. · Identifies and implements current and new processes / technologies to increase equipment performance and uptime · Champions systems and best practice procedures towards a proactive manufacturing culture. · Analyzes equipment performance, failure data, and corrective maintenance history to develop and deploy engineering solutions, improved maintenance strategies, preventative maintenance optimization, and other reliability techniques. · Provides technical service to operations and manufacturing personnel on equipment related troubleshooting efforts. · Utilizes predictive, preventative, and precision maintenance technologies and strategies designed to identify or control risks prior to failure and ensure optimum maintenance execution. · Collaborates with the maintenance team to prioritize assets and actions by determining failure probabilities and evaluating the risk of compliance, supply, strategy, and cost. · Provides training and coaching in Root Cause and Reliability Analysis and takes ownership for ongoing corrective action tracking, implementation and follow up to ensure that all Root Cause Analysis projects are documented. · Ensures compliance with regulatory requirements and ATS policies and procedures. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Bachelor's degree in engineering (ABET accredited) · Eight or more years of reliability experience across 2 or more manufacturing sites · Demonstrates ability to perform full array of reliability tool sets · Strong technical understanding of electrical or mechanical components, tools, and designs · Ability to complete a failure mode effects analysis, cause and effect diagrams, root cause failure analysis, life-cycle costing, and risk analysis · Ability to research and apply new equipment technology / trends · Robust problem solving, mathematical, analytical, and decision making skills · Proficiency with computers, maintenance systems, and applications, including Microsoft Office · Excellent verbal communication, facilitation, and presentation skills · Strong reporting and technical writing capability · Ability to build and maintain positive, professional relationships Desirable KSAs: · Desire to develop into a leadership role · Experience with data trend analysis, vibration analysis, motor current analysis, oil analysis, lubrication and hydraulic testing, laser alignment, nondestructive testing, infrared thermography, ultrasound technology, acoustic reliability technology, Weibull analysis, and Six Sigma or Lean Manufacturing methodologies · Knowledge of various government regulations such as, Current Good Manufacturing Practice (cGMP), National Electrical Testing Association (NETA), Environmental Protection Agency (EPA), and Occupational Safety and Health Administration (OSHA) · CMRP certification · Green Belt certification · STS certification Competencies: · Drive & Motivation · Interpersonal Skills · Task Management · Strategic Skills · Customer Focus · Self-awareness · Management & Leadership Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $50.96 - $65.19 USD ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. (****************************************************************************************************** ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here. (******************************************************************************************************

One of our clients is a German-owned (US-based) capital equipment subsidiary that sells inline automated systems for the confectionary and food industries. Due to growth and expansion in North America, the company is seeking two Field Service Engineers based in the Midwest (Chicago/Milwaukee), Northeast (Philadelphia/NYC/New Jersey), or Southeast (Atlanta) areas. The Role: Will travel up to 75% on site to customers/manufacturing locations. Trips are primarily 1-3 weeks, Monday-Friday but travel flexibility is a must. The Responsibilities: Install, repair, and rebuild high speed, servo-driven, mechanical motion-controlled systems that slice, cut, fold, slip, stack, wrap, and convey products. Perform product training and demonstrations on an as needed basis The Ideal Candidate: Strong mechanical systems repair/installation background with: Servos Camshafts High-speed mechanical motion systems (1,000 to 3,000 pieces per minute) Ability to diagnose and repair: Electrical components Wiring issues PLCs (AB, B&R, and Schneider software) Safe driving record Ability to obtain a passport and travel to Germany Lives within 90 minutes of an airport Salary: $35 to $50 an hour Overtime Per Diem Interested candidates may respond to this posting or contact Sean Broom directly on his LinkedIn page.

The ideal candidate will have a wide range of responsibilities including maintenance, repair, and calibration of field equipment. The successful candidate will be a problem solver who is responsive to customers' needs. Responsibilities Install, service, and repair electromechanical equipment at customer sites, manufacturing facilities, and sales offices Utilizes hand tools and test equipment, such as multimeters, to perform work Effectively communicates technical issues and findings with the Engineering Department Performs in house phone troubleshooting support to customers May be required to provide after-hours phone troubleshooting support Will be asked to travel extensively, nationwide REQUIRED QUALIFICATIONS: Experience with industrial and commercial electrical systems Knowledge or experience of industrial mechanical systems preferred, but not necessary Expert knowledge of supplied machinery (company provides extensive training) Requires travel up to 100% of the time, inclusive of consecutive overnights, between 10-14 days

Do you want to make a difference in the lives of others? Your skills, experience, and passion are needed on our team. We are looking for new on-call team members to join us, at our Crisis Recovery Center, to work as Crisis Services Technicians. This is an exciting opportunity to part of the expanding crisis services at the DuPage County Health Department! Located in our new Crisis Recovery Center on the DuPage County Campus in Wheaton, Crisis Services provides 24/7 crisis mental health services to county residents experiencing psychiatric crises or needing support for mental illness symptoms. Our team delivers top-notch care with rapid response times. Click to learn more about the Crisis Recovery Center. In this on-call position, you will be required to work at least three (3) shifts per month, having evening and weekend availability, working no more than 1000 hours per year. We offer a $2.00 per hour shift differential for our second shift and $2.50 for our overnight shift. Responsibilities Supports maintenance of a safe, therapeutic environment for clients seeking services through Crisis Recovery Center programs on the Substance Use Stabilization Unit, Adult Mental Health Unit, and Youth Mental Health Unit, as well as in Crisis Residential. Facilitates client safety and quality care in Crisis Residential and Crisis Recovery Center Programs, through completion of client rounding and belongings checks Assists with client medication observation in Crisis programming as needed Performs tasks related to maintaining environmental standards in crisis programming Assist in de-escalation of clients experiencing a mental health crisis through engagement with client and coordination with team members providing clinical intervention. Completion of required documentation within established timeframes, through use of an Electronic Client Record Participates in team meetings to assess clients' progress. Participates in emergency response activities as assigned. Requirements A qualified candidate must possess a valid State of Illinois Driver's license and have a good driving record. New employees are required to attend paid on-site, HR New Hire Orientation at our Central Public Health Center in Wheaton, during our day shift generally, from 8:00 am to 4:30 pm, for one week. Must have flexibility to work on the day shift for two weeks of additional training on site at the CRC. Must be 21 years of age. Experience preferred, but not required While performing the duties of this job, the employee must be able to stand, walk, use hands to push and pull cleaning equipment, reach with hands and/or arms, climb ladders, crouch or stoop, and lift or move up to 10 pounds. Salary $17.00 Hourly Job Type On-Call Service Unit Behavioral Health Services Department Emergency Services

General inspection, calibration, troubleshooting, repair, test, and maintenance of all types of HVAC, electrical, lighting, fire, life, safety, and facility systems. Provide additional facility maintenance services including carpentry, plumbing, painting, snow removal, and CMMS system data entry to maintain client's building infrastructure and grounds in a commercial office facility. SUMMARY OF ESSENTIAL JOB FUNCTIONS AND RESPONSIBILITIES: Inspect, calibrate, maintain, troubleshoot, test, and repair all types of facility systems including HVAC, electrical, lighting, fire, life, safety, boilers, refrigeration units, compressors, motors and pumps and all associated controls and provide facility maintenance services including carpentry, plumbing, painting, landscaping and snow removal to maintain client's building infrastructure and grounds. Attend and/or participate in safety training per C&W SERVICES policy Perform routine inspection, preventive maintenance, calibration, functional and operational testing of facility systems and equipment. Utilize CMMS computer system to document tasks performed and maintain equipment histories including parts replaced, hours worked, time to respond, and time to complete. Responsible for completing and data input for all assigned work orders (both corrective and PM) in a timely manner. Maintain equipment, tools, and work areas in a clean, safe and orderly manner. Utilize and have a general understanding of national and local codes for equipment repair. Perform all work in accordance with OSHA, state and municipal requirements and C&W SERVICES safety policies. Perform quality work and regularly communicate repair status of devices and systems to supervisor/Manager. Must be able to work with informal and formal teams, with other employees and customer representatives from various departments demonstrating a professional demeanor at all times. May be required to work with and coordinate activities of other vendors including specialists Perform all other tasks as assigned by supervisor/Manager in response to the needs of the client Perform daily survey of buildings to identify repair and preventive maintenance tasks. Report to supervisor/Manager on a regular basis (daily/weekly) on conditions relative to general operations. Responsible for participating, seeking and coordinating training and continued professional development in the areas of advancing technology, safety, and general skill improvement. Available for ON CALL duty on nights, weekends and holidays to address emergencies Possible flexible hours to accommodate client needs Pay/Work Hours/Location: Up to $30 per hour 1st Shift Elmwood, IL SUPERVISORY RESPONSIBILITIES, if any: Not applicable to this position PERFORMANCE GOALS: Safety - follow C&W SERVICES safety policy and participate in all required training and related programs Cost - assist account leadership to meet financial targets Quality - meet goals as outlined in the SLA's for work completion, callbacks and customer service issues Delivery - follow work order and services delivery processes QUALIFICATIONS: To perform this position successfully, an individual must be able to perform each job duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. Good general working knowledge of all trades Proven mechanical ability and aptitude. Good computer skills are required; operating knowledge and trouble-shooting of equipment via Building Management System preferred. Proven ability to work cooperatively with others. Demonstrates attention to detail Understands business implications and decisions Develops and implements cost saving measures Conserves organizational resources 2-5 years related experience and/or training at a semi-skilled level of experience of general maintenance in a commercial facility setting or equivalent combination of education and experience. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished by supervisor/Manager in written, oral, diagram or schedule form Increase knowledge and operation of specialized equipment through study of all manufacturer manuals and installer instructions. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to perform the following physical activities during a normal work-day: stand, walk, sit, use hands to finger, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl, climb or balance, talk, hear and smell. Must be able to lift up to 75 pounds 1/3 of time at work. Must have the following vision requirement: close vision, distance vision, color vision, and depth perception WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to perform duties under the following environmental conditions Work near moving mechanical parts, work in high, precarious places with potential exposure to work environments containing fumes or airborne particles, toxic or caustic chemicals, outdoor weather conditions, extreme cold and heat (non-weather), risk of electrical shock and occasional loud noise

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. If you are a current associate of Primo Brands, please apply via my ADP. Factory Location: Woodridge, IL Compensation: $41.03 / hour 6-8% shift differential paid for applicable hours worked Shift: Sunday - Thursday 9pm - 5:30am Ability to work holidays and weekends per business needs Responsibilities: Skills Required Performs routine preventative and corrective maintenance and testing on equipment Perform maintenance tasks to include - repairing and improving, from minor rebuilds to major overhauls on all equipment. Identify processing waste reduction opportunities and assist in reduction projects. Participate in preventative maintenance program to help reduce costs of operations through PM optimization. Dismantles, cleans, repairs and tests electrical, electronic and mechanical components to determine component-level failure Support equipment installations, retrofits and upgrades to include vendors and contractors Communicate, coach and train employees to continuously improve team's ability to respond to equipment failures and loss of production. Actively support NCE through SLC DOR, DER, GSTD's - DMAIC projects and Debriefs or shift handoffs Maintains preventative maintenance logs and accurate records of all testing and repairs Recommends equipment to be included in preventive maintenance programs. Perform Preventative Maintenance task to identify all potential mechanical and electrical issues with equipment throughout the plant. Rebuild worn-out, but reusable, pieces of equipment, such as gearboxes for scheduled PM's. Troubleshoot/ investigate and repair all mechanical, electrical, pneumatic, and utility systems including chillers, air compressors etc. Eliminates problems from recurring utilizing the Breakdown Analysis process Communicates directly with equipment suppliers, contractors and vendors as necessary Areas of responsibility will include but are not limited to -Production support - Mechanical Room- Water Processing - Boiler Room -Waste Water Treatment- Water Chemical Treatment Program Qualifications: Qualifications Three or more years proven maintenance experience in a manufacturing environment Prior experience with high and low pressure compressors, chillers, water treatment, boilers is preferred Strong technical knowledge of compressed air systems (pneumatics), electrical systems, hydraulics and water processing is preferred Knowledge of bottling equipment, PM programs and SAP system preferred Successfully demonstrates strong mechanical abilities Strong communication and interpersonal skills for interaction with all employees. Must have electrical knowledge of single and three phase power including the ability to diagnose and replace electric motors Must be able to work and accomplish projects with little to zero supervision Must be able to foster and build a team-work environment Communicate effectively with various support groups, supervisors, and team members Maintain a high level of professional and organizational ethics and image with all plant and outside personnel Able to read, interpret and analyze computer generated reports Perform all tasks with extreme accuracy Must be able to do physical inspections, (i.e. climbing, reaching, extending) Must be proficient with mechanical drawings and OEM technical prints for parts identification Proficient computer navigation skills, including the use of Microsoft Office applications Available for call-ins or to cover all shifts to support production teams as required Works together with Safety department to achieve a zero injury workplace Must display a positive mental attitude and be open to a fast paced ever changing work environment Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members . Primo Brands' established portfolio includes billion-dollar brands Poland Spring and Pure Life , premium brands like Saratoga and Mountain Valley , regional leaders such as Arrowhead , Deer Park , Ice Mountain Ozarka , and Zephyrhills , purified brands, Primo Water and Sparkletts , and flavored and enhanced brands like Splash and AC+ION . Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law.

LHH Recruitment Solutions has partnered with a growing organization, and they are seeking a motivated Maintenance Mechanic / Field Technician - Multi-Site Plastics Manufacturing to join their team. This is a unique opportunity for a hands-on professional who enjoys traveling and solving complex challenges in state-of-the-art production facilities. Why Consider This Opportunity? Travel & Variety: Support multiple advanced plastics plants across the U.S. and Canada. Approximately 70% travel-perfect for those who love new challenges and environments. Growth & Innovation: Work alongside senior engineering and maintenance teams, contributing to continuous improvement and automation projects. Impact: Play a key role in ensuring operational excellence, safety, and reliability in high-volume manufacturing settings. Key Responsibilities: Troubleshoot, repair, and maintain hydraulic, pneumatic, and electrical systems (including 480V 3-phase). Support installation, upgrades, and relocation of production equipment. Collaborate with engineering and plant maintenance teams to deliver projects on time and within budget. Apply TPM (Total Productive Maintenance) methodologies to drive efficiency and minimize downtime. Identify and implement system improvements to optimize automation and production performance. Maintain accurate project documentation and technical records. Ensure strict adherence to safety protocols during all on-site activities. Qualifications and Skills: Bachelor's Degree preferred; relevant certifications or technical degrees considered. 3+ years as a maintenance mechanic or field technician experience. Proven expertise in hydraulics-especially in plastic blow molding or injection molding environments. Exposure to PLCs (Programmable Logic Controllers). Ability to read and interpret technical diagrams, schematics, and manuals. Familiarity with AutoCAD and basic drafting is a plus. Willingness and ability to travel up to 70% of the time to support multiple plant locations. Hands-on knowledge of Total Productive Maintenance practices. Compensation Range: $75,000 - $115,000 Benefits Offered: 3 weeks of vacation, paid sick leave where applicable by state law, Medical Insurance, Dental Insurance Vision Insurance, 401K, and Life Insurance. If you are a passionate Maintenance Mechanic / Field Technician looking for a new and rewarding career, please apply today! You don't want to miss out on this opportunity! LHH is a leader in permanent recruitment-and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn't a perfect match. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit **************************************

HAVC Data Center TechnicianTravel 90% About US:Munters is a global leader in climate solutions for mission-critical processes. We offer innovative, efficient and sustainable solutions for customers in industries where controlling indoor humidity, temperature and energy efficiency is mission critical. Climate control systems often account for a large percentage of energy consumption in many of our customers'operations. With an optimal climate system, we can help them to more efficiently use energy or waterresources and thereby reduce their climate and environmental impact. Sustainability is an important part of Munters' business strategy and value creation.We pride ourselves on fostering a dynamic and inclusive work environment where interns are valued members of the team and are given meaningful projects to work on.Job Summary:Data Center Service Technicians travel to customer sites to start up, commission and safely troubleshoot and repair Data Center equipment. This position requires the ability to work independently, and candidates should have strong diagnostic and troubleshooting skills. Requires some ability to manage the projects while onsite for start-up commissioning and coordination of other trades and services.Essential Functions and Responsibilities: Perform factory start-up, commissioning, warranty and billable service on Munters Data Center equipment and systems. Maintain and protect Munters equipment and property. Respond in a timely manner to all requests for service from customers or management. Provide customer training on Munters equipment. Provide technical feedback on equipment using detailed field service reports. Understand that Field Service's major role is one of instant response to customers' needs and focus as a part of a team always makes us available to our customer needs, urgent or otherwise. Requirements: 5+ years of experience and extensive knowledge in the Mechanical field specifically the HVAC field. Frequent travel required, up to 90%, across the USA by plane and car. Extensive knowledge in electrical troubleshooting, able to diagnose electrical issues with proficiency and record data. Knowledge of all safety procedures and requirements and has training in Arc flash, lock out tag out and other safety requirements. Understands and knows how to utilize all PPE associated with electrical safety. Extensive refrigeration knowledge. Understands how to pressure test, evacuate, and charge systems without assistance. Understands the refrigeration system concepts and can fully troubleshoot and diagnose refrigeration problems. Proficient in brazing and soldering. Holds a universal refrigeration card. Extensive knowledge in Controls, has experience with troubleshooting, programming, or downloading to controls systems. Understands PLC's and how to work with all types of platforms. Knows how to access information from PLC's and be able to adjust. Able to connect to a PLC with a computer to communicate and make changes. (Optional) State Licensed Master HVAC mechanic. This requires years of experience, training and testing along with experience working under other experienced professionals to achieve. Strong written and verbal communications skills Self-Motivated, with the ability to work independently. Ability to communicate well with other site personnel as well as Sales PM, Service Manager and Technical Support personnel. Education: High Diploma or equivalent. Trade School desired. Physical Requirements: Heavy Work: Exerting up to 75 pounds of force occasionally and/or up to 20 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects. Climbing, stooping, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data, viewing computer terminals, expansive reading, etc. Work Conditions: You must wear personal protective equipment such as safety glasses, safety boots, hard hats, and hearing protection where the company requires. Ability to travel and be away from home for several days at a time. Willingness to take "On-call" duties as required. Willingness to occasionally work weekends and/or holidays. Willingness to work outdoors in all types of weather conditions. Willingness and ability to work 6 feet or more above the ground as required. Benefits: Competitive Salary Comprehensive health, dental, and vision insurance plans Flexible work schedule Generous vacation and paid time off 401K retirement savings plan with employer matching Professional development opportunities, including tuition reimbursement, and conference attendance Company-sponsored social events and team-building activities State-of-the-art equipment and tools to support your work Equal Opportunity Employer:We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. All offers are contingent on a pre-employment drug test and background check, as applicable for the position

As a Maintenance Technician, you'll be responsible for completing work orders and assisting with the day-to-day upkeep of our apartment community. You'll work directly with residents to resolve maintenance requests submitted through AppFolio, ensuring repairs are handled efficiently and professionally. In this role, you'll handle a wide range of maintenance tasks to keep our community running smoothly. That includes responding to and completing resident work orders through AppFolio, performing repairs on plumbing, electrical, HVAC, appliances, and carpentry as needed, and taking care of routine upkeep like lighting, locks, painting, and general property repairs. You'll also assist with unit turns between residents by handling make-ready repairs and cleaning, troubleshoot and address any emergency maintenance issues (with possible on-call rotation), and help maintain an organized inventory of tools, supplies, and equipment-all while providing friendly and respectful customer service to residents and coworkers.

. Vanguard Durst Digital Printing Systems is the leading manufacturer of UV Flatbed, Hybrid and Roll to Roll printers for signage, decor, corporate, industrial, and packaging. Vanguard's mission is to deliver the best ownership experience in the wide format market to our customers. This is accomplished by offering the highest levels of service, outstanding communication, technology, and customer care. We create, foster, and nurture a culture of caring about our customers, vendors, and employees which shows in every interaction internally and externally. At Vanguard, you aren't just an employee - you are family. From day one, you'll be welcomed into our team of dedicated, talented, friendly people who will provide all the support you need to be successful. Your first month of training will include time at our Atlanta-area headquarters as well as in the field where you will shadow other Service Technicians. You get to form strong relationships with customers and delight them with outstanding service. You'll have the satisfaction of knowing you made a positive, lasting impact every day. Are you the go-to for fix-it assistance in your circle of family and friends? Are you a DIY person who likes working with your hands and mind, tackling challenges, and taking things apart and fixing them? If yes, we want to talk to you! Here are some examples of the skills/experience/hobbies we find typical in our Service Technicians: RC Car and Planes Robotics experience Automotive repair Motorcycle rebuild and repair Bicycle repair/modifications Small engine repair Automation machine repair Mechatronics students Machine assemblers or repair Marine mechanics Now, a bit more about what you'll be doing in this job: The Service Technician is responsible for installing and servicing all printers to the delight of our customers, while enhancing Vanguard Digital's products by recommending enhancements/improvements. Your specific responsibilities include: Ensure all printers are properly installed and operational. Train Vanguard customers on how to operate our printers. Diagnose, repair and solve issues with our printers via remote support or onsite service. Support sales activities by passing information/opportunities to Sales Provide remote support for our customer service 1-800 line. Communicate effectively with all stakeholders to direct activities that support and deliver on our commitments. Document/Record service calls including materials and resolutions in our software (Salesforce) system. What you bring to the table: The successful candidate will be an aggressive problem solver and an action oriented individual who effectively builds long-term value with our customers and fellow employees. To be considered for this position, you must have these qualifications: Heavy, industrial equipment maintenance knowledge/experience Installation/support experience onsite as field tech/engineer Willingness to travel as needed, typically up to 75% of the time throughout the USA and Canada, with occasional weekend work to meet customer needs Great attitude and eagerness to learn Excellent communication and customer service skills Strong mechanical aptitude and good dexterity Strong electrical and electronic troubleshooting skills Ability to identify, recommend, and implement effective technical repair and maintenance solutions. Proficient computer skills High school diploma or equivalent Experience or training within some form of mechanical discipline Valid driver license and willingness to do pre-employment drug and criminal background checks Physical Demands: Must be able to stand and walk most of the workday, including frequent bending/stooping. Must be able to lift/carry and push/pull up to 50 pounds. Bonus points for these nice-to-have but not required qualifications: Associates degree or equivalent training and/or experience Previous experience in printing or related industry Familiarity with reading schematics and wiring diagrams Hands-on experience with hand tools Working knowledge of multimeters for electrical testing Working knowledge of AC and DC up to 3 phase Basic knowledge of PLC programming Strong understanding of computer hardware and software

Title: Maintenance Technician Hire Type: Direct Hire Shift : 2nd Shift Compensation: $27-36/hr Benefits: Medical, Dental, Vision, 401k after 1 year of employment Must have Skill Set: Maintenance experience in a manufacturing environment, Food preferred Overview: The Maintenance Technician plays a key role in keeping the facility running safely, efficiently, and reliably. This position handles day-to-day maintenance and repair of equipment, building systems, and production machinery, while ensuring all work meets EPA, OSHA, and Hazmat safety standards. Job Duties: • Perform troubleshooting, repairs, and routine maintenance on industrial electrical power systems, basic controls, and processing equipment. • Diagnose and service vacuum, pneumatic, hydraulic, and mechanical systems to minimize downtime. • Support the installation and setup of new processing and packaging equipment under direct supervision. • Use hand tools and machine shop equipment to measure, cut, drill, and fabricate components within required tolerances. • Weld stainless steel and carbon steel as needed for equipment and structural repairs. • Execute preventative maintenance activities and document completed work accurately. • Maintain facility infrastructure, including building repairs and grounds upkeep. • Read and interpret basic electrical schematics, diagrams, and written instructions. • Follow all food manufacturing GMPs and safety protocols at all times. • Perform additional duties as assigned to support production and facility operations. Qualifications: • Preferably 5+ years of experience in maintenance, mechanical repair, or a related trade. • Experience in a meat or food manufacturing environment is highly valuable; familiarity with USDA/FSIS regulations is a plus. • Strong mechanical aptitude with the ability to apply math concepts such as fractions, ratios, and proportions to real-world tasks. • Proven problem-solving skills with the ability to work from written, verbal, diagrammed, or scheduled instructions. • Positive attitude and commitment to maintaining a safe, collaborative work environment.

Maintenance Mechanic The Mechanic will perform preventative maintenance & emergency repairs to all packaging machinery, striving to improve equipment reliability & quality, as part of the maintenance team. Duties and Responsibilities: Fill out daily log reports, emergency breakdown reports, work orders, and communicate with incoming shifts. Perform machine set up and repair assembly and packaging equipment. Perform preventative maintenance routines on all production equipment. Ability to work on low voltage and 120-480vac equipment, starters, motors, vfd's, sensors, controllers, photo-eyes, etc. Install, debug and stabilize plant equipment as required. Read schematics and blueprints to interpret, diagnose, and troubleshoot electrical and pneumatic issues to properly and safely repair. Perform repairs and upgrades of the machinery and equipment to ensure proper operation. Install electronic parts and hardware, using soldering equipment and hand tools Assist in Production/Maintenance related assignments as needed. Communicate regarding issues and problems solve with Production staff any quality and safety concerns. Perform electrical and distribution lock out/ tag out method steady with customary safety protocol. Record maintenance data as directed by the Maintenance supervisor to monitor equipment performance, i.e. work orders Identify and report equipment concerns to the Maintenance Supervisor. Participate in overtime assignments as required. Mechanic is required to supply their own hand tools and a lockable toolbox. Working in a general manufacturing environment. Perform various other similar and related duties as required by the Plant Manager. Qualifications: Experience in equipment maintenance Experience with Pneumatics, Hydraulics and Electrical Ability to withstand wet, cold (35-40F), humid and hot environments, Must be able to bend, reach, kneel, stand for extended hours, Must be able to climb ladders, Must be able to move heavy objects. Must have experience with the following machines: Tiromat packaging machines & Drake Loaders Meat processing facility knowledge. 5 plus years' experience preferred. PPE/Tools Safety toe footwear Hairnet, beard net (if applicable), bump cap, frock If needed: safety glasses, hearing protection, rubber boots Safety Expected to work continuously in a safe manner, and to encourage others to work in a safe manner Expect to maintain good housekeeping, and report any unsafe conditions Food Safety/Quality Adhere to all GMP's (Good Manufacturing Practices), such as a good hand washing practices and adhering to employee hygiene plan Follow all USDA guidelines Report any issues regarding food safety or quality Disclaimer Statement The information contained in this job description is intended to describe the essential job functions required of those assigned to this job. It is not intended to be an exhaustive list of all accountabilities, activities, skills, and knowledge needed to perform the job. Please note that job functions are reviewed periodically and are subject to change based upon company business needs. Bobak Sausage Company is an Equal Employment Opportunity Employer.

Day Shift: 6:00am-2:30pm Reporting to the Manufacturing Engineer, the Industrial Maintenance Tech will be responsible for shift support for all electrical/mechanical problems that might arise with equipment/facilities as well as completing all predictive and preventative maintenance work. This position would also be responsible for all machine management and maintenance across the fabrication department and would lead special projects to both equipment/facilities and systems development. Essential Duties and Responsibilities include the following, as well as other duties may be assigned. Follow all safe work practices and procedures. Wear all prescribed personal protective equipment. Ensure all proper lockout/tag out procedures are followed. Provide shift support for all electrical/mechanical and technical problems Install, maintain, remove, troubleshoot, and diagnose a wide variety of electrical/mechanical equipment and components used in manufacturing process. Troubleshoots, repairs, and maintains a variety of production machinery and equipment including electrical, mechanical, hydraulic, and pneumatic systems and parts. Installs, modifies, and relocates machinery and equipment and performs fabrication, welding, mechanical, electrical, electronics, plumbing, carpentry, or other maintenance skills. Repairs and modifies buildings and plant systems as required. Troubleshooting and repair of components such as rolls, shafts, bearings, drive belts, drive chains and gear boxes utilizing basic mechanics hand and power tools Troubleshooting and repair of pumps, valves, and piping systems to include installation of coper pipes or PVC pipes. Reads and interprets manuals, schematics, blueprints, drawings, and other written installation and repair instructions Identify and complete predictive and preventative maintenance work and weekly mechanical press inspections Machinery includes NC Turret Presses, Waterjet, Press Brakes, Routers, Welders, Drill Presses, and hand power tools. Manage backlog of work orders. Maintain Maintenance Area tools and equipment. Maintain and organize all toolboxes, workspaces, and maintenance specific equipment. Perform other duties as required to maintain or improve plant reliability. Conduct daily safety risk assessments on routine and non-routine job tasks. Lead systems development work such as standard work, training, and housekeeping initiatives throughout the plant. Travel: Minimal; less than 5% Qualifications & Experience: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High School or GED education required (Diploma or GED). 3+ Years of Mechanical experience in an industrial environment. Bilingual in English and Spanish is preferred. Machining and fabrication experience. High level experience troubleshooting manufacturing equipment. Welding, machining, and fabrication skills. Demonstrated skill in working with conveyors, mechanical drive systems (gearboxes, sheaves, pulleys, belts, bearings, sprockets, and chains), pumps, hydraulics, and pneumatics. Ability to perform precision tasks including alignments using lasers, dial indicators, etc. Physical Demands The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 25 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Plant Environment This position operates in a manufacturing setting and can be subject to extreme cold and hot temperatures; uneven walking surfaces with cords, tools, and other obstacles; intermittent loud noises; and dusty or dirty conditions. Required PPE includes: Hard hat (when required), safety glasses, earplugs, steel toe/composite boots, cut sleeves/cut resistant gloves and fall protection. Education and/or Experience

Maintenance Technician 2 IDR is seeking a Maintenance Technician 2 for one of our top clients in Pleasant Prairie, Wisconsin. If you are looking for an opportunity to join a large organization and work within an ever-growing team-oriented culture, please apply today! Responsibilities of the Maintenance Technician 2: Troubleshoot a variety of multi-craft equipment. Test electrical systems and continuation of circuits for wiring. Install, replace, and/or repair electrical wiring, switch boxes, conduits, light fixtures, etc. Ensure machines are lubricated properly to maintain functionality Assist in training and mentoring junior technicians as needed. Required Skills for the Maintenance Technician 2: 5+ years of professional experience in industrial manufacturing. Strong electrical/mechanical background. Strong ability to interpret OEM manuals, drawings, and schematics. Ability to read and interpret precision measuring devices. Familiar and comfortable with shop equipment like power tools, band saw, and drill presses. What's in it for you? Competitive compensation package Full Benefits; Medical, Vision, Dental, and more! Opportunity to get in with an industry leading organization Close-knit and team-oriented culture Why IDR? 25+ Years of Proven Industry Experience in 4 major markets ClearlyRated's Best of Staffing Client and Talent Award winner 11 years in a row

Maintenance Mechanic - 2nd Shift Conducts machine setup, troubleshooting, repairs, and preventive maintenance service. Responsibilities Provides emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service. Prepares and sets up machinery for scheduled production runs. Performs mechanical skills including, but not limited to, mechanical, electrical, pneumatic, and hydraulic troubleshooting and repair of packaging and production machines. Reads and interprets equipment manuals and work orders to perform required maintenance and service Diagnose problems, replace, or repair parts, test, and adjust. Perform regular preventive maintenance on machines, equipment, and plant facilities. Perform a variety of plumbing maintenance and electrical functions. Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties. Detect faulty operations, and defective material, and report those and any unusual situations to proper supervision. Comply with safety regulations and maintain clean and orderly work areas. Perform other duties as assigned or needed. Qualifications One-year certificate from college or technical school, six months to one-year related experience, or equivalent combination of education and experience Technical training; exposure to meat processing equipment 2 years of related experience in food strongly preferred Strong organizational skills Excellent written and verbal communication skills Ability to understand and follow written and verbal instructions Physical Demands and Work Environment: Work is performed in an office environment. The noise level in the work environment is usually moderate. The work environment characteristics described here are representative of those individual encounters while performing the essential functions of this position. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Fair Oaks Foods assures equal employment opportunity in all its hiring and employment policies and practices, which include all aspects of employment, such as recruiting, hiring, promotions, transfers, demotions, layoffs or terminations, compensation, benefits, training, company-sponsored education, social and recreational programs or events, and all other terms, conditions, and privileges of employment. These policies and practices are administered without regard to “legally protected categories” such as: race, color, religion, national origin, age, gender, disability, marital status, veteran status, sexual orientation or sexual orientation, pregnancy status or medical conditions related to childbirth, and/or any other factor protected by law.

Company is seeking a Maintenance Technician II to assist with maintaining an industrial laundry facility. Responsibilities include assisting with repairing, maintaining, installing and troubleshooting industrial equipment, systems and components incl Maintenance Technician, Technician, Maintenance, Manufacturing, Healthcare, Industrial

Prepare vehicle records and report both manually and on a computer. Perform safety inspections of equipment and prepare safety documentation required. Inspect and perform work on the under parts of vehicles. Access any area of the equipment or vehicl Technician, Trailer, Vehicle, Automotive, Transportation

Essential Duties and Responsibilities include the following. Other duties may be assigned. Following prescribed procedures and services, operates and/or maintains facility heating, cooling, electric, plumbing and other mechanical equipment. Makes routine repairs to building, mechanical equipment and grounds. Comprehends various manuals, blueprints, and building plans. Work orders to be completed in an efficient and timely manner. Performs preventative maintenance throughout the building. Can make changes to building controls system for HVAC equipment. Completes necessary paperwork and daily log when completing tasks. Keeps all landscaped and parking lot areas clean safe and maintained in accordance with designed standards. Complies with and understand all OSHA, IDPH and regulatory body standards. Uses necessary safety precautions for oxygen usage, lock out tag out of equipment, use of fire prevention equipment, and other safety precautions as needed. Contacts outside vendors for equipment repair when needed and assists with the repairs. Ensures safety of residents, staff and visitors by complying with safety and security procedures. Attends required in-services and training sessions, including online training. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High School Diploma or GED. Ability to communicate with all departments in English, written and verbal form. Basic computer skills (Microsoft Word, PowerPoint, Excel). Minimum of 3 to 5 years of related maintenance experience including the operation and maintenance of HVAC and boiler machinery and equipment. Working knowledge of plumbing, carpentry, mechanical and electric repairs. Previous experience working in a healthcare environment preferred. Some local travel may be required. Weekend availability required. Additional Skills Carpentry skills. Performs plumbing repairs (toilets, sinks, urinals, garbage disposals). Uses hand tools and other tools required for job at hand. Performs electrical repairs (replacing outlets, light switches, ballasts, small motors). Assembles equipment. Repairs door locks, hinges, and other door hardware. Ensures that the building is meeting regulation standards and has knowledge of building life safety code IDPH, OSHA, and local fire department. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must have physical coordination, dexterity, agility and mobility and be able to safely and properly utilize and transport tools, supplies and equipment properly. While performing the duties of this job, the employee is required to walk various distances, stand, talk and hear. The employee is required to stoop, kneel or crawl; and to climb stairs and ladders while balancing objects. The employee must lift and/or move up to 50 pounds. Must have specific visual ability and acuity, including close vision, distance vision, color vision, peripheral vision, and depth perception, as required to ensure safe, accurate, and timely performance of duties. Customer Service Displays behavior that creates a customer service culture at CJE by understanding the needs of our clients and customers and demonstrating a strong bias toward service, quality and customer satisfaction. CJE Values All staff should demonstrate the CJE Values in their behaviors and work practices. Respect-We recognize, honor, and acknowledge the inherent value of each person for their wisdom, their culture, their background and their unique history. Advocacy-We encourage public policy which will benefit our clients by educating ourselves and the community. Furthermore, we give voice to our clients' needs and facilitate positive action on their behalf. Compassion-We treat everyone with caring, sensitivity, understanding, and supportive responsiveness. Innovation-We continue to advance our knowledge and strive to develop, evaluate, and implement new and advanced programming and models of care to bring benefits to our clients, community and broader older adult/health care environment. Intention-We approach our work and each task with mindful consideration as to what we are doing and why we are doing it, as individuals and as an agency. Accountability-We are responsible individually and as an Agency for honest, accurate work and interaction with others. We plan strategically and provide measurable quality care with clear fiscal and ethical responsibility. CJE SeniorLife is an equal opportunity employer. #CJESL11 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.