Service technician jobs in Syracuse, NY

General facility maintenance and repair duties as directed. Pneumatic and direct digital control experience. Knowledge of air conditioning and refrigeration including ice machines. Experienced in troubleshooting and repair of HVAC equipment. Ability to cut and thread pipe to meet base fabrication needs. Maintain and install filter systems. Some knowledge of medical gas systems. Install and maintain circulating pumps. Knowledge of high-pressure steam boilers and delivery systems. Estimate and requisition materials needed for projects. Working knowledge of OSHA, State, DOH and Hospital Safety Standards. Ability to analyze and troubleshoot Electrical controls. Additional electrical experience is helpful. Experienced in all forms of soldering. Ability to understand and complete preventative maintenance programs. Be able to perform heavy lifting and climbing. Ability to perform snow removal duties including shoveling salting and working knowledge of snow plow operations. Strong self-motivation is expected. Core Job Responsibilities 55% Work order response: but not limited to area temperature problems throughout the Facility. Replacing/repairing pump and circulators. Repairing and charging refrigerant systems. Adding or moving equipment for construction projects. 25% Preventive maintenance duties: Typical but not limited to filter changes, coil cleaning, and belt changes. Ice machine cleaning and service. 10% Compliance with regulatory responsibilities: Ensure appropriate function is maintained to comply with various regulatory agencies. Refrigerant reclaiming, and Fire barrier repair. 10% Quality Improvement: to look for ways to improve the patient/visitor experience. Update heating and cooling systems. Modifying or move HVAC components or sensors for improve comfort. Education/Experience Requirements Required: High School or equivalent, 5 years of HVAC Experience Preferred: Associates or higher degree 3-5 years of Healthcare Facilities or Trade Experience Licensure/Certification Requirements Required: Universal Refrigerant Reclaiming license Disclaimer Qualified applicants will receive consideration for employment without regard to their age, race, religion, national origin, ethnicity, age, gender (including pregnancy, childbirth, et al), sexual orientation, gender identity or expression, protected veteran status, or disability. Successful candidates might be required to undergo a background verification with an external vendor. Job Details Req Id 89077 Department ENGINEERING Shift Days Shift Hours Worked 7.50 FTE 0.94 Work Schedule UFCSM Employee Status A1 - Full-Time Union 2006 - UFCW Pay Range $21 - $27 Hourly

Cargill is a trusted salt supplier to a wide variety of industries; our portfolio includes food processing salts, sodium reduction solutions, salt for water softeners and swimming pools, bulk and packaged ice melters, industrial salts, and salt for animal feeding. Working at Cargill is an opportunity to thrive - a place to develop your career to the fullest while engaging in meaningful work that makes a positive impact around the globe! We depend on creative, responsible, hardworking individuals like you to operate our business successfully! Job Type: Full Time Shift(s) Available: 1st/3rd Compensation: $24.39 - $26.71/hr Sign-On Bonus: $1500 New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Benefits: Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts A Typical Work Day May Include: Completing preventative, predictive, and reactive industrial maintenance throughout the facility Documenting all completed work and the conditions found, utilizing maintenance computer software as necessary Installing, maintaining, testing, evaluating, and repairing various components, and systems including packaging equipment, hydraulic & pneumatic systems, screw, belt and roller conveyors, pumps, gear reducers, and bearings Operating standard maintenance tools such as power tools, basic hand tools, pneumatic tools, electric tools, etc. Comprehending mechanical/electrical schematics, blueprints, and/or operation manuals Operating a forklift Understanding and adhering to all safety policies and procedures Maintaining a safe and clean work environment Ability to repair equipment in close proximity to explosives Other duties as assigned What You Will Need: Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Basic computer skills Ability to understand and communicate in English (verbal/written) Ability to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodation Ability to work in varied indoor and outdoor conditions, which may include heat, cold, dust, loud noise, etc., with the use of personal protective equipment (PPE) Basic math skills, including addition, subtraction, multiplication, and division Ability to work overtime, including weekends, holidays, or different shifts with advance notice Minimum of one year of experience with maintenance trades in an industrial environment Ability and willingness to work underground in a mining environment Current ATF certification or the ability to obtain one upon hire What Will Put You Ahead: Experience with SAP or a Computerized Maintenance Management System (CMMS) Certified Maintenance Reliability Technician (CMRT) or willing to acquire certification Predictive Maintenance and/or Precision Maintenance Certifications High school diploma/GED or a minimum of two years equivalent work experience Experience in troubleshooting and maintaining various components and systems, such as but not limited to packaging equipment, hydraulic & pneumatic systems, belt or roller conveyors, pumps, gear reducers, or bearings Routine background check and Alcohol, Tobacco, and Firearms (ATF) "Explosives Possessor" background check: To ensure a safe working environment for all employees, we will conduct a criminal background check. Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Fastrac is a member of the EG America family of brands. EG America is one of the fastest-growing convenience store retailers in the United States, committed to becoming America's #1 ‘one-stop' destination. The business has an established pedigree of delivering excellent fuel, grocery and merchandise, and food service. Headquartered in Westborough, Massachusetts, our Company has grown to over 1,500+ locations across the United States employing over 18,000 team members. You can find us operating under the following store banners: Certified Oil, Cumberland Farms, Fastrac, Kwik Shop, Loaf N Jug, Minit Mart, Sprint Food Stores, Tom Thumb, Turkey Hill, and Quik Stop. Our headquarters in Westborough, MA is home to our Store Support Center, Company Warehouse, and Culinary Center. What We Offer: Take home vehicle All tools provided Work-life balance On-call stipends Reasonable OT expectations Training & 3 year pay raises for entry level / inexperienced technicians Competitive wages Work today, get paid tomorrow through our earned wage access program* Paid Time Off Medical/Health/Dental Coverage 401K with Company Match Team Member Discounts Tuition Reimbursement Employee Assistance Program Health Savings Account Company Spirit Days Employee recognition and awards And much more! Position Summary: The General Maintenance Technician is responsible for performing a variety of maintenance tasks to ensure the safety, functionality, and appearance of facilities and equipment. Key responsibilities include troubleshooting, repairs, and preventive maintenance in areas such as plumbing, electrical, HVAC, carpentry, and general building systems. Responsibilities: 1. Troubleshoot and independently repair building systems, including plumbing, electrical, HVAC, and general mechanical components. 2. Perform preventive maintenance tasks on complex systems and equipment to ensure optimal performance and longevity. 3. Assist in training and mentoring entry-level technicians by providing guidance on maintenance tasks and best practices. 4. Lead smaller maintenance projects, ensuring timely completion and adherence to quality standards. 5. Collaborate with vendors or contractors to coordinate repairs or installations, verifying work complies with company and industry standards. 6. Maintain an organized inventory of tools, replacement parts, and vehicle supplies, ensuring adequate stock for ongoing maintenance needs. 7. Assist with equipment upgrades or replacements and coordinate ordering of necessary parts or tools. 8. Conduct routine maintenance and inspections on the service vehicle, ensuring compliance with scheduled upkeep and company standards. 9. Adhere to workplace safety protocols, company policies, and industry regulations (e.g., OSHA, safety codes, building codes) while completing tasks. 10. Identify and promptly report safety hazards or compliance issues to the maintenance supervisor. 11. Perform other duties as assigned by the management team to support departmental objectives. Working Relationships: Work directly with Department teammates. Frequent communication with other departments or teams, and External Vendors. Minimum Education: High School or GED Preferred Education: Trade and Technical schools' certificate/diploma Minimum Experience: 3-5 years of related experience Preferred Experience: 5-7 years of related experience. Proficient knowledge of building systems, including HVAC, electrical, plumbing, mechanical, and safety systems Licenses/Certifications: Applicable Trade Licensure; Plumbing, Electrical, Carpentry Soft Skills: Communication Skills - Clearly convey information, listen actively, and ensure mutual understanding Teamwork & Collaboration - Working effectively with others to achieve common goals Problem-solving - Use critical thinking to analyze situations and implement effective solutions Adaptability - Stay flexible and open to change in a dynamic work environment Time Management - Prioritize tasks, meeting deadlines, and managing time efficiently Other Requirements: Travel: Travel is a must; you must be able to drive for extended periods as needed · A company vehicle is provided; they must maintain a clean driving record Hours & Conditions: Monday-Friday, 40 hours minimum, with participation in an on-call rotation, including holiday coverage Physical Requirements:· Must be able to work safely in confined spaces as required by the role Ability to regularly lift up to 10 pounds, frequently lift up to 25 pounds, and occasionally lift up to 80 pounds, using proper lifting techniques and equipment as needed Must be able to stand or walk for up to 8 hours per day Ability to perform physical tasks such as reaching overhead, bending, squatting, twisting, grasping, gripping, and performing repetitive movements Comfortable working in environments with varying temperatures, including cold and hot conditions, as required by the role The work environment usually has moderate noise levels typical of industrial or operational settings At EG America, it's important that our employees reflect the world we live in and the communities we serve. We celebrate our differences, so your unique background and skillset could bring a wonderful new perspective to our team. If you have a passion for delivering exceptional results, thrive in a fast-paced environment, and bring experience in business management or related areas, we'd love to meet you - even if you don't meet every single requirement.

Workdays/shifts : Varying shifts, days/hours, and some weekends/holidays. More details will be provided during the interview process. Employment Type: Full-time Pay Range: $30.00 per hour - $33.50 per hour University students with restrictions on number of hours they can work, including international students, should apply for open student worker positions at the school they attend. You can search student worker jobs here (********************************** Working with Sodexo is more than a job; it's a chance to be part of something greater because we believe our everyday actions have a big impact. You belong in a company that allows you to act with purpose and thrive in your own way. What You'll Do: As a HVAC Technician at Sodexo, you are a problem-solver and safety promoter. We will rely on your expert knowledge and technical skills to identify repair and replacement needs. By keeping others safe, your actions have meaningful impact. Responsibilities include: Install, maintain, and repair heating, ventilating, and air conditioning systems Monitor HVAC systems and operations and ensure that routine preventive maintenance performs according to established schedules and standards Respond to hot and cold calls, then troubleshoot and resolve issues Check, repairs and/or replaces valves, motors, controls, switches, gauges, wiring, fans, pumps, compressors, condensers, cores, pipes, and other functional components of the system Attends work and shows for scheduled shift on time with satisfactory regularity Other duties may be assigned and can differ among accounts, depending on business necessities and client requirements. What You Bring: Successful candidates will be team-oriented, adaptable, reliable, and nurturers of a healthy/safe working environment for all. 1 or more years of related work experience. Holds appropriate license/certification for the specific work to be done in the city and state in which the work will be done. Minimum requirement is EPA CFC Universal Certificate. Working knowledge of a variety of HVAC systems, including chilled water systems, variable air, variable refrigerant flow, single/multi-split and other commercial systems. May be required to have previous BMS experience if working in a commercial environment. Additional Requirements: Possess a valid driver's license Link to full Job description What We Offer: Flexible and supportive work environment, so you can be home for life's important moments. Access to ongoing training/development and advancement opportunities to turn your job into a career Full array of benefits that support you and your family's wellbeing, including paid time off, holidays, medical, dental, vision, tuition reimbursement, 401k, discount programs, and more. In addition to Sodexo's standard, some locations may offer additional site-specific benefits, including free “shift” meals (and/or allowances/per diems), uniforms, safety shoes, public transportation support and/or parking. Link to benefits summary Overall, Sodexo strives to offer comprehensive summaries of our benefits packages and detailed descriptions of the positions candidates are applying for. However, due to the contractual nature of our business, some job duties and employee benefits may vary based on the unit/work location. We encourage you to discuss any questions about Sodexo's benefit offerings during the interview process. Who we are: At Sodexo, our purpose is to create a better everyday for everyone and build a better life for all. We believe in improving the quality of life for those we serve and contributing to the economic, social, and environmental progress in the communities where we operate. Sodexo partners with clients to provide a truly memorable experience for both customers and employees alike. We do this by providing food service, catering, facilities management, and other integrated solutions worldwide. Our company values you for you; you will be treated fairly and with respect, and you can be yourself. You will have your ideas count and your opinions heard because we can be a stronger team when you're happy at work. This is why we embrace culture and belonging as core values, fostering an environment where all employees are valued and respected. We are committed to providing equal employment opportunities to individuals regardless of race, color, religion, national origin, age, sex, gender identity, pregnancy, disability, sexual orientation, military status, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. Should you need assistance with the online application process, please complete this form.

A subsidiary of UGI Corporation, UGI Energy Services supplies and markets natural gas, liquid fuels, renewable natural gas, and electricity to 42,000 customer locations across the Mid-Atlantic and Northeastern US. We are a supplier, marketer, and midstream services provider - one backed by 135 years of natural gas experience, plus our own expanding energy infrastructure. Along with buying and selling energy commodities at the wholesale level, UGIES owns and operates key midstream natural gas assets. Hourly Rate This job posting is open from December 1, 2025 to December 5 , 2025. The hourly rate for this position ranges from $26.00 to $27.00, depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works. Job Summary The Renewable Natural Gas Technician I is responsible for the maintenance and operations of UGIES RNG Facilities. Troubleshoots, inpects, maintains, and repairs equipment such as valves, controllers, pumps, compressors, boilers, and generators. Performs daily inspections of all equipment and performs routine maintenance. Responsible for completing preventative maintenance and compliance related paperwork. **Seeking someone that lives in the Courtland or Homer, NY area or within 45 minutes from there.** Duties and Responsibilities Develop a comprehensive understanding of UGIES RNG facilities and related dairy operations. Inspect, maintain, and operate facilities in a safe, reliable, and efficient manner. Maintain a working knowledge of instrumentation and control equipment. Maintain a working knowledge of electrical systems. Record and analyze daily readings to ensure facility is operating efficiently. Plan, organize, and prioritize assigned responsibilities and coordinate with employees and contractors Serve as a point of contact for related dairy farm operators . Prioritize and complete all regulatory and environmental compliance requirements. Coordinate and communicate with outside parties including landowners, contractors, and utilities operators. Assist with oversight of construction of new RNG projects. Assist with M&R station maintenance and compliance tasks when required. Respond to afterhours call outs. Maintain required Operator Qualifications to perform duties. Comply with UGIES safety policies and procedures Assist any other departments if needed Perform other job related duties as required Knowledge, Skills and Abilities Experience working with regulated commodities, specifically propane and natural gas Strong mechanical and electrical aptitude with the ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment Professional, reliable, self-directing work habits Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation Knowledge of dairy farm operations, specifically digesters Ability to adapt to changes such as types of equipment used, software platforms, and company procedures. Ability to become a key member of a team by possessing strong communication skills, highly adaptable, responsible and respectful Ability to read and understand verbal/written instructions and signage in English Ability to communicate with others in English Ability to speak a second language, a plus Education and Experience High School Diploma or G.E.D. required 2 years of industry related experience Excellent organizational skills Excellent written and verbal communication skills Demonstrated self-starter with the ability to work independently and exercise good judgement Valid driver's license with demonstrated safe driving record #LI-Onsite UGI Energy Services, LLC is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. The pay for this position ranges from $45,600.00 to 60,800.00, depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation includes eligibility to earn a performance-based bonus or commissions on completed sales. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

Fastrac is a member of the EG America family of brands. EG America is one of the fastest-growing convenience store retailers in the United States, committed to becoming America's #1 ‘one-stop' destination. The business has an established pedigree of delivering excellent fuel, grocery and merchandise, and food service. Headquartered in Westborough, Massachusetts, our Company has grown to over 1,500+ locations across the United States employing over 18,000 team members. You can find us operating under the following store banners: Certified Oil, Cumberland Farms, Fastrac, Kwik Shop, Loaf N Jug, Minit Mart, Sprint Food Stores, Tom Thumb, Turkey Hill, and Quik Stop. Our headquarters in Westborough, MA is home to our Store Support Center, Company Warehouse, and Culinary Center. What We Offer: Take home vehicle All tools provided Work-life balance On-call stipends Reasonable OT expectations Training & 3 year pay raises for entry level / inexperienced technicians Competitive wages Work today, get paid tomorrow through our earned wage access program* Paid Time Off Medical/Health/Dental Coverage 401K with Company Match Team Member Discounts Tuition Reimbursement Employee Assistance Program Health Savings Account Company Spirit Days Employee recognition and awards And much more! Position Summary: The Field Technician will travel to store locations to perform maintenance and service repairs on various types of commercial food service equipment. Candidate will work with dispatchers and team supervisors to manage workload to complete calls in timely manner. Responsibilities: • Repair and/or refurbish on equipment such as: frozen beverage, fountain soda coffee brewers, gas dispensing equipment, refrigerated cases, and other food service equipment. • Perform preventative maintenance on equipment such as frozen beverage units, fountain soda, coffee brewers, high speed ovens and other food service related equipment. • Responsible for managing parts inventory on their assigned service truck by conducting weekly cycle counts and periodic physical inventory. • Must be able to travel to several locations throughout the day and work independently the majority of the time. • Receive dispatches via email & phone, and works with dispatchers to ensure prioritization of work with the goal of maximizing equipment up-time. • Updates job status and notes via online work order management system, provides detailed resolution notes • Maintains truck inventory accuracy by performing weekly cycle counts and annual inventory. • Ensures service vehicle is maintained, clean, and well stocked with service parts. • Perform other job related duties as assigned by Department Manager Working Relationships: Internal Facilities Managers, dispatchers and parts department, to include Retail Store team members. Will also interact with other technical peers including: HVAC Technicians, Fuel Maintenance Technicians and General Maintenance Technicians. Minimum Education: a high school diploma or its equivalent Preferred Education: Trade school and/or Associates Degree Minimum Experience: Requires 0-2 year's related experience. Preferred Experience: 2+ years of experience repairing food service equipment such as high speed ovens, food warmers, coffee brewers, frozen beverage equipment (Brand: Taylor or FBD), fountain soda units, roller grills and other related equipment. Additional experience in other trades (HVAC, plumbing, electrical) would be a plus. Other: Physical • Must be able to lift 80 pounds • Grasping/Griping/fine manipulation • Pushing/pulling/bending/kneeling/twisting/climbing on a regular basis • Carrying/sitting/walking/standing and lifting above shoulder level on a regular basis. Travel: As a Field Tech, this position will travel to multiple store locations during the entire shift. Hours & Conditions: Hours and shift times can vary. Must be flexible and have the ability to work overtime when needed At EG America, it's important that our employees reflect the world we live in and the communities we serve. We celebrate our differences, so your unique background and skillset could bring a wonderful new perspective to our team. If you have a passion for delivering exceptional results, thrive in a fast-paced environment, and bring experience in business management or related areas, we'd love to meet you - even if you don't meet every single requirement.

A career with Kerry Taste & Nutrition offers you an opportunity to shape how people across the globe view food and beverage while providing you opportunities to explore and grow as your interests do. A career with Kerry Applied Health & Nutrition offers you an opportunity to shape how people across the globe view food and beverage while providing you opportunities to explore and grow as your interests do. With our commitment to a sustainable future, a career with Kerry is something you can feel good about. Where you'll work: Our Norwich, NY location is part of our Applied Health and Nutrition Division and one of our specialty sites that creates proteins, lactose, coatings, and flavors. The location lies within Chenango County and is advantageously located within a 50-mile radius of the major cities of Binghamton, Syracuse, Utica, Cooperstown and Oneonta. 158 State Hwy. 320, Norwich, NY 13815 Pay Rate/Hourly Rate: $25.26 - $40.96 per hour. $2000 Sign on Bonus after 90 days Shift/Working Hours: 5:45 AM - 6:15 PM, Rotating 12-Hr Days What you'll do: Under the direction of the Maintenance Supervisor, Shift Supervisor and/or Plant Engineers, the technician is responsible for performing general maintenance work to keep production running efficiently. Individual must be familiar with the safe and proper use of all basic hand tools. Must not fear working in high places. Report and/or correct all conditions that may affect the safe, efficient operation of equipment, including steam leaks, electrical energy waste, monitor Waste Treatment Plant, etc. Must be able to read and use service manuals and drawings. Individual should be able to operate forklift truck in a safe manner and use proper safety measures. Must have knowledge or during the 90-day trial period demonstrate the ability to learn the following: Safe and proper methods of disassembly and assembly of machinery and equipment, to include basic blueprint reading. Proper methods of piping installation. Proper lubrication procedures and lubricants. Work safely with electricity at various voltages used in the plant, to include reading and understanding electrical prints. Operational and maintenance aspects of site boilers, compressed air system, well and soft water distribution systems and fire protection equipment/systems (with training). May be required to handle hazardous waste (internal training provided). What you'll need to be successful and safe: SKILLS: 2-5 years of Industrial Maintenance with experience in all or some of the following including, but not limited to: Ability to read and understand service manuals and equipment drawings. Experience troubleshooting electrical circuits and equipment. Experience working with 480V electrical including single and 3 phase motors and VFDs. Experience with process control instrumentation and mechanical power transmission Experience working on piping systems including steam, water and chemical. Experience pipe fitting, welding, and fabrication Experience working on liquid processing equipment such as pumps, valves, filter presses, heat exchangers, evaporators, and spray dryers. Knowledge of boilers, compressed air, HVAC, water distribution systems, waste-water treatment, and fire protection equipment/systems (with training) Knowledge of or experience working with PLCs. Documentation using a CMMS such as SAP or similar. High school diploma or GED is required Associate degree or technical certification in related field is preferred Working in food/beverage is highly preferred. The pay range for this position is $25.26 - $40.96 per hour. Kerry typically does not hire an individual at the top or near the top of the range, as we are a pay-for-performance company, and this range is set to continue to reward performance annually while in role. Compensation decisions are dependent on the facts and circumstances of each case. The specific compensation offered to a candidate within the above range may be influenced by a variety of factors including skills, qualifications, experience, and internal equity. Kerry offers a competitive benefits package, including medical, dental, vision, paid time off, a 401(k) plan with employee and company contribution opportunities, Employee Share Plan, Life, disability, and accident insurance, and tuition reimbursement. This job posting is anticipated to expire on 5-2026.

Title: Bioprocess Associate - Night Shift (6pm - 6am) Primary Recruiter: Jane Bautista Pay Rate:: $20/Hour initial 6 months contract (possible extension) Schedule: Fixed shift schedule. 36 hours the first week, 48 hours the next week, alternating. NIGHT: 6 pm - 6 am. Must be willing to work scheduled holidays, weekends, and overtime. This is a NIGHT shift role. Position Overview: Work is performed in a biologics manufacturing environment with classified areas requiring clean hygiene, specified gowning, and personal protective equipment (PPE). This is not a lab position. This is an entry level position that will train for proficiency within assigned functional area(s). Biologics orientation and job function training will be provided. 100% Onsite. Primary Responsibilities: Set-up, operation, and cleaning of process equipment including manipulation of valves, hoses, clamps, piping, etc. Prepare buffers, media, and reagents up to 2000L Monitor process parameters and escalate abnormal conditions Maintain accurate documentation Sustain a clean and orderly work environment Achieve and maintain proficiency of above responsibilities through training This position includes physical demands which may involve bending, twisting, squatting, kneeling, climbing, or reaching as well as infrequent unassisted lifting (not to exceed 50lb) This role will require handling and working with hazardous materials such as caustic, acid and steam Requirements: High school diploma Ability to adhere to written instruction, verify data, perform minor mathematics equations with instruction and accurately document results to perform work safely and compliantly Ability to collaborate with teammates to execute scheduled work safely and compliantly Strong communication skills Familiarity with common computer tools, such as web-based applications Possess a continuous improvement mindset, a desire to learn, and a drive to contribute to a culture of excellence and our mission of delivering benefits to patients worldwide Nice to Have: Mechanical aptitude Familiarity with general chemistry, microbiology, or clean room operations Prior manufacturing experience Prior experience with cGMP operations or aseptic technique

Milton Rents (a division of Milton CAT) is seeking a Lead Equipment Service Technician to perform preventative maintenance on construction rental equipment, and to inspect, diagnose and repair damaged rental equipment to correct working order. Milton Rents offers challenging career opportunities, extensive training, and employee development along with an opportunity to grow your career and thrive under our reputation for excellence. Whether you're looking for a steady job with great benefits, or an exciting place to start your career and grow within the organization, Milton CAT can meet your needs! We offer excellent benefits and supply you with the tools you need to maximize your potential. Pay Range: $24.00-$35.10 per hour depending on experience. Benefits include: Paid Time Off + 8 company paid holidays. Medical, Dental and Vision insurance options for Employee and Family Disability & Life Insurance Packages Competitive Retirement Plan Tuition Reimbursement - available to FT employees with 1 year+ of service Additional supplemental offerings and discount programs Employee Referral Program Responsibilities Assist the Branch and Regional Service Manager with organizing and managing daily workflow. Help identify and prioritize shop issues and concerns. Inspect, service, and repair a wide variety of construction rental equipment ensuring that units are maintained per Milton Rents standards & requirements Diagnose and repair hydraulic systems, electrical systems, drive components, and other mechanical systems. Exhibit positive and effective interaction with customers, fellow employees, Management and Equipment manufacturers. Uphold safety practices and standards. Maintain accurate records as it relates to repair orders, parts ordering, and time keeping. Must be both efficient and thorough with all repairs and rental check-in. Maintain a clean work area and keep tools in proper working condition. Maintain and wear all required Personal Protective Equipment (PPE) Complete and submit all paperwork required by shop management in the requested timeframes. Qualifications High-school diploma or GED is required. 3+ years of verifiable experience as a Construction Rental Equipment Mechanic. Valid Driver License Knowledge of safe operation of Construction Rental Equipment Good written and verbal communication skills. Strong Mechanical aptitude and troubleshooting skills; proficient in mechanical systems (transmissions, engines, hydraulics, etc.) Able to lift 30 lbs regularly, and occasionally up to 80 pounds independently or with assistance. Must have a valid driver's license and maintain a safe driving record. This job description is not intended to be all-inclusive. Your supervisor may request and assign similar duties. Resumes that are mailed, emailed or hand-delivered to Milton CAT or any employee will not be considered. You must apply online. A background check and drug test are required as part of our pre-employment process. Milton CAT is an equal opportunity employer that values the strength diversity brings to the workplace. We encourage applications from individuals with disabilities, minorities, veterans, and women. Applicants receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, sexual orientation, gender identity, handicap, disability, veteran status, genetic data, or other legally protected status. We base all employment decisions to further this principle of equal employment opportunity. VEVRAA Federal Contractor. EEO/AA employer. Milton CAT is a Drug-Free workplace.

Job Description Do you have experience as a PLC Master Technician and looking for an amazing career? Affinity Recruiting is looking for a PLC Master Technician for an amazing company near Syracuse, NY. Ideal candidate will have experience trouble shooting Allen Bradley PLC's, Micro Logic, SLC and Control Logix to be considered. Also, ideal candidate must be willing to work weekends and overtime as needed. Candidate requirements: Must know how to install and maintain high speed industrial equipment. Able to troubleshoot, repair all electrical defects of the equipment and make adjustments where it is needed. Must perform preventative maintenance on the industrial equipment, on electrical equipment, transducers, solid state circuits, inspection of the equipment and understand complex timing and inspect all devices. Able to install by reading design prints and instructions. Able to diagnose and troubleshoot on the PLC and standard ladder diagrams. If you have this experience, we would love to hear from you! Please apply to this posting and a recruiter will reach out to you as soon as possible!

Job Description: HVAC Positions- Experienced Service Technician Salary Range: $55,000.00 to $70,000.00 (Based on Experience) About Us: Holbrook Heating is a leading provider of Residential HVAC solutions, dedicated to delivering top-tier service and high-quality installations. We are currently seeking skilled professionals to join our team. Key Responsibilities: Diagnose, troubleshoot, and repair a diverse range of HVAC equipment, demonstrating expertise in decision-making for effective resolutions. Read and interpret wiring diagrams and blueprints accurately to facilitate seamless installations and repairs. Exhibit advanced customer service skills, maintaining open communication and professional conduct with clients. Take on leadership roles and responsibilities, showcasing a proactive approach and a readiness to lead by example. Benefits: Company Van Company Gas Card Health Insurance Dental & Vision Insurance 401K with Company Match PTO Family Friendly Work Environment On the Job Training And Much More! Requirements: Qualifications desired: Certificate of completion from an HVAC Technical School 2 + years of experience Insurable driving record Possess tools needed At Holbrook Heating, we value expertise, dedication, and a commitment to excellence. Join us in providing top-notch HVAC solutions and be part of a dynamic team that sets the standard in the industry. Compensation details: 60000-90000 Hourly Wage PIb15ef239752e-31181-36054477

This is where your work makes a difference. At Baxter, we believe every person-regardless of who they are or where they are from-deserves a chance to live a healthy life. It was our founding belief in 1931 and continues to be our guiding principle. We are redefining healthcare delivery to make a greater impact today, tomorrow, and beyond. Our Baxter colleagues are united by our Mission to Save and Sustain Lives. Together, our community is driven by a culture of courage, trust, and collaboration. Every individual is empowered to take ownership and make a meaningful impact. We strive for efficient and effective operations, and we hold each other accountable for delivering exceptional results. Here, you will find more than just a job-you will find purpose and pride. Your Role at Baxter THIS IS WHERE you build trust to achieve results! As a Product Service Technician, you will provide technical and hands-on support on increasingly sophisticated products. Your strong electronic and analytical skills will allow you to find and resolve product failures to serve our customer quickly and accurately. This is where your expertise in troubleshooting, testing and correcting malfunctions in electronic devices, and test equipment will aid you in repairing the instruments that are returned to Baxter for service. You may help in the development of lean service methods and procedures for the repairing and inspecting of products or assemblies. Your strong communication skills will aid in training other internal or external service personnel as needed. By establishing regular internal contacts, you will exchange information, resolve issues, tackle problems and troubleshoot products, parts or processes. Are you motivated by our mission of saving and sustaining lives? Second shift hours are Monday - Friday 2:45-11:15pm EST, with occasional Saturdays. Your Team Join a knowledgeable, motivated, and hard-working team onsite in Skaneateles, NY! Baxter offers dental and medical insurance, paid time off, parental leave, 401k match, paid holidays, and more! You are a collaborative team player and are capable of receiving initial instructions, service requirements, and advice from your supervisor or engineers with review upon completion. A crucial aspect of this position will be applying quality improvement and lean practices to all process and assignments while actively participating in a positive manner with functional and cross functional teams. What You'll Be Doing: Test, troubleshoot, and repair Medical Devices, test fixtures and Automated Test Equipment (ATE). Identify, isolate and control nonconformance of components or products. Record product service data using defined data collection methods. Conduct internal communication with internal departments or external customers and vendors to resolve issues. May provide technical training assistance for to external biomedical staff, customers or vendors as the need arises. May travel to customer locations to perform assistance when performing service, calibration, or training. What You'll Bring: Associate degree in Electronics, Computer Information/Tech or related discipline preferred. Strong troubleshooting, analytical and problem-solving experience and aptitude. Must be organized and have a keen attention to detail. Proficient with test equipment or tools such as: Digital Multimeter or Oscilloscope. Strong oral and written communication skills are preferred. You may be asked to speak publicly to a small group and on the phone or face to face with our customers. Solid understanding of Windows Operating systems (Microsoft Office, Excel and Power Point) is a plus. Ability to travel to perform on-site service is a plus. SAP Experience is beneficial. Must be able to lift 40lbs. We understand compensation is an important factor as you consider the next step in your career. At Baxter, we are committed to equitable pay for all our employees, and we strive to be more transparent with our pay practices. To that end, this position has a base salary range of $43,200 to $59,400. The above range represents the expected base salary range for this position. The actual salary may vary based upon several factors including, but not limited to, relevant skills/experience, time in the role, business line, and geographic/office location. US Benefits at Baxter (except for Puerto Rico) This is where your well-being matters. Baxter offers comprehensive compensation and benefits packages for eligible roles. Our health and well-being benefits include medical and dental coverage that start on day one, as well as insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance. Financial and retirement benefits include the Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount, and the 401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching. We also offer Flexible Spending Accounts, educational assistance programs, and time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service, family and medical leaves of absence, and paid parental leave. Additional benefits include commuting benefits, the Employee Discount Program, the Employee Assistance Program (EAP), and childcare benefits. Join us and enjoy the competitive compensation and benefits we offer to our employees. For additional information regarding Baxter US Benefits, please speak with your recruiter or visit our Benefits site: Benefits | Baxter Equal Employment Opportunity Baxter is an equal opportunity employer. Baxter evaluates qualified applicants without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity or expression, protected veteran status, disability/handicap status or any other legally protected characteristic. Know Your Rights: Workplace Discrimination is Illegal Reasonable Accommodations Baxter is committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please click on the link here and let us know the nature of your request along with your contact information. Recruitment Fraud Notice Baxter has discovered incidents of employment scams, where fraudulent parties pose as Baxter employees, recruiters, or other agents, and engage with online job seekers in an attempt to steal personal and/or financial information. To learn how you can protect yourself, review our Recruitment Fraud Notice.

Job Description Technical Associate II (ELECTRICAL) $24 - $32 per hour Do you have electrical experience? Are you interested in working on a farm? Do you enjoy being an important part of a cohesive team? If yes, please read on! Our Technical Associate at our Wayne County Eggs Farm in Wolcott, NY learns how best to fix, install and maintain electrical components. Typical hours 40+/week and require some weekend work. Available schedules: Sunday - Thursday or Tuesday - Saturday. REQUIREMENTS: Must be comfortable working around computers. Some existing experience, and a willingness to learn more of the following: Motor power, and control circuits VFD and PLC circuits and components Breaker panels, and lighting circuits Communications networks such as; Ethernet, Modbus, Repairs and installations of conduits raceways, and wires/conductors Desired but not required: Plumbing Refrigeration components Boiler/hot water/ ventilation computers. Being bilingual- Spanish/ English is a plus Physical Requirements: The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to: Sit, talk, see and hear Stand, walk, squat and crawl Lift or move up to 80 pounds Vision abilities required include close vision and working at a computer monitor and calculator Hours may be long and irregular Be able to climb and work on our grain elevators (up to 120') The physical work environment is an agricultural farm environment with attendant noise level. However, the employee will often be exposed to: Dust, dirt and odors associated with agricultural farming Excessive noise levels associated with a processing plant and machinery Company Info Kreher Family Farms is your local egg producer. We are a 3rd and 4th generation, family-owned and operated business. With a deep-rooted history in family values since 1924, our farm continues to grow. Our farm operations have expanded to include compost and fertilizer and crop productions for our hens and customers. We will never stop growing! Our people are part of our farm family! It is their dedication and respect for one another that allows us to continue to confidently grow as a business. We believe strongly in creating an environment in which people can continue to learn and grow professionally. BENEFITS: Health, dental, vision, and supplemental insurance 401k plan with company contribution Paid Time Off Daytime work schedule, OT available Referral bonus program (up to $1k) Three dozen free farm-fresh eggs per week! **MUST NOT CURRENTLY OWN, HUNT BIRDS, OR VISIT ANYONE THAT OWNS BIRDS** (pet bird, backyard flock, etc.) IND7

Pay: $35 - $40 per hour, based on experience and certifications About the Job We are looking for an experienced Automotive A Level Service Technician to join our growing team. This role is responsible for diagnosing, repairing, and maintaining vehicles in line with Ford and manufacturer standards. The ideal candidate will have Ford certification, a strong technical background, and the ability to deliver efficient and accurate work. A NY State Inspectors License is required for this role. Responsibilities Perform repairs and maintenance as outlined on work orders with efficiency and accuracy Diagnose and repair vehicle systems, including engines, transmissions, electrical, steering, suspension, brakes, and air conditioning Test-drive vehicles and use diagnostic tools to identify issues Communicate with Service Advisors regarding needed repairs, timelines, and cost estimates Complete warranty repairs to manufacturer standards Maintain a clean and safe work environment Stay current with training and manufacturer updates Qualifications Ability to commute to 1479 Genesee St, Oneida, NY 13421 required 5+ years of automotive Service Technician experience Ford certification preferred; ASE certification NY State Inspector License required High school diploma or equivalent Strong mechanical and troubleshooting skills with ability to use diagnostic equipment Positive, professional attitude with excellent customer service skills Ability to work in a fast-paced, team-oriented environment Valid driver's license with a clean driving record Pay & Benefits Pay: $35 - $40 per hour, based on experience Schedule: Full-time, flexible work hours Benefits: Health, dental, and medical insurance 401(k) plan Paid time off and vacation Birthday holiday Employee vehicle purchase plan Long-term job security Growth opportunities with paid training Free uniforms Newly updated service bays with advanced equipment, including a Hunter Alignment machine and on-car brake lathe Top Tech+ membership program About Us At NYE Ford, we are proud to serve drivers in Oneida, NY, and the surrounding community with a commitment to quality, integrity, and customer care. Our dealership is built on strong family values and a dedication to providing outstanding automotive sales and service. When you join our team, you become part of a workplace that values growth, collaboration, and long-term career success. NYE Ford is an equal opportunity employer. We are committed to creating an inclusive workplace and prohibit discrimination or harassment based on race, color, religion, age, sex, national origin, disability, genetics, veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

What you'll do: Plan and perform all required operations to install, maintain and repair steam boilers, air compressors, complicated electrical equipment automatic boiler controls, pumps, motors, power generating equipment and pressurized piping systems including water, steam, oil, compressed air, natural gas as related to apparatus in the powerhouse. Perform all chemical tests as needed to properly maintain boilers and associated equipment. Tear down complicated units, determine extent of troubles, repair or replace defective parts or wiring and reassemble. Use a normal range of hand tools and pipe fitting machinery to bend, thread and cut pipe. Use torch to sweat copper joints and solder as required. Install and maintain high pressure steam stations throughout the facility including steam lines, traps, strainers, regulators, valves and insulation Troubleshoot powerhouse equipment to isolate problems and repair both analog and digital control systems as needed Identify common symbols on mechanical drawings and follow both electrical and plumbing diagrams Enter and edit time schedule data using the energy management system. Qualifications: Basic Qualifications: Minimum of 3 years in Powerhouse Technician experience - repair steam boilers, air compressors, complicated electrical equipment automatic boiler controls, pumps, motors, power generating equipment and pressurized piping systems including water, steam, oil, compressed air, natural gas as related to apparatus in the powerhouse. Experience with reading schematics and blueprints Must live within 50 miles of the Syracuse facility Preferred qualifications: Experience working in a manufacturing environment. Five (5) full-time years' experience in powerhouse technician Ability to problem solve and understand mechanical equipment.

Requirements YOU HAVE: Experience determining a vehicle's condition by conducting inspections and diagnostic tests, identifying worn and damaged parts. Experience performing repairs and inspections on variety of Class 5-8 trucks, such as brakes, tires, wiring etc. at customer locations. Maintain a high level of productivity and be able to work within or close to most Standard Labor Operations. The ability to take ownership of all aspects of customers' vehicle repair to provide best in-class service. Operate dedicated Service Truck in a safe manner. Proficiency in the use of computers/iPad/iPhone The ability to engage customers in a professional manner to strengthen the customer relationship. YOU MAY ALSO HAVE: Positivity, adaptability, creativity, energy Brake certification ASE certifications Diesel Engine Technical degree and/or training WE OFFER: Competitive salary Comprehensive benefits including medical, dental and vision insurance 401(k) Annual Tool and Shoe Allowance; Uniforms On-going paid training Tuition Reimbursement A fun work environment where our teammates feel appreciated. For more information about PENN Power Group, please visit our website at ********************** An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Please no phone calls. Penn Power Group is a federal contractor and has implemented an affirmative action plan to ensure equal employment opportunities for females, minorities, individuals with disabilities, and qualified targeted veterans. We make reasonable accommodation for individuals with disabilities to apply for employment. Contact ************************* ************** ONLY if you wish to request an accommodation or if you wish to be included in our affirmative action program. Resumes sent to this address will not be accepted.

Electrical Technician Default Skills 7600 Morgan Rd, Liverpool, NY 13090, USA Full-time Applicants must be currently authorized to work in the United States on a full-time basis. No sponsorship is available for this position. We invite you to bring your enthusiasm and energy into play as you develop your electrical fabrication and troubleshooting skills. To succeed in this role, you must have a great attitude and willingness to learn. Are you our new electrical technician. Click the apply-button to send your application. Do you want to push the boundaries of your profession and develop your excellence in an open, collaborative and empowering culture? We work to create a sustainable future, and our inspiring projects and innovative solutions strive to set the standard among our peers. You will join a global company that has been growing successfully since its founding in 1945. Together, we lead and leave a positive impact on societies, companies and people around the world. Job Description You will join our Electrical Department As our new Electrical Technician, you will be part of 100,000 square foot manufacturing facility in Liverpool, NY. You will be part of our Electrical, Instrumentation, and Controls Team. Your key tasks and responsibilities will be: Industrial Control Panel Fabrication and assembly Read and understand control & electrical drawings and schematics Document drawing modifications and maintain equipment manuals Capable of installing industrial conduit and wiring systems Operating test instruments and troubleshooting Maintain safe and organized work environment Travel domestically approximately 30% Qualifications Qualifications Your starting point for constant growth From the moment you join Ramboll, we will support your personal and professional development so that you grow with the company. For this role, we believe your starting point is: Completed Electrical construction and maintenance degree/certification or equivalent Prioritizing Safety of yourself and co-workers 3+ years of experience in related field Familiarity or trained in NFPA 70E preferred Positive attitude towards developing your skills and working with others Exceptional work ethic. Personal qualities that will help you succeed in this role include Safety oriented, positive attitude, able to follow direction, capability to utilize common sense, work diligently on tasks, and willingness to ask questions. Additional Information Welcome to our Energy division Ramboll is at the forefront of addressing the green transition and offers a holistic approach to energy that supports the sector on the journey towards more sustainable solutions. With 1,800 experts in 14 countries, covering the full spectrum of technologies and all parts of the value chain from production and transmission to distribution, we plan, design and implement energy solutions all over the world. How to apply Apply online. Attach your CV, cover letter and relevant documents showcasing why you are the right fit for the role, and when you are available to start. We look forward to receiving your application. Ramboll in the Americas Founded in Denmark, Ramboll is a foundation-owned people company. Ramboll has thousands of experts working across more than 70 offices in the Americas, delivering innovative solutions within Environment & Health, Water, Energy, and Planning & Urban Design. We invite you to contribute to a sustainable future working in an open, collaborative, and empowering company. Combining local experience with global knowledge, we together shape the societies of tomorrow. An equal opportunity employer Equality, diversity, and inclusion is at the heart of what we do. At Ramboll, we believe that diversity is a strength and that different experiences and perspectives are essential to creating truly sustainable societies. We invite applications from candidates of all backgrounds, regardless of age, disability or medical condition, gender identity, marriage and domestic partnership, pregnancy and maternity, race, ancestry, or national origin, religion or belief, sex and sexual orientation, military service and veteran status, or any other protected characteristic. Ramboll wants to ensure opportunities are accessible to candidates with disabilities. Please reach out to our recruitment team to discuss any adjustments that you might require during the application process.

TOMRA North America, is a top International Reverse Vending and Recycling Company. At Tomra transformation is at the heart of everything we do. We transform ideas & technology to create intelligent and pioneering tools to support a sustainable future. Schedule: 8am -4:30pm Monday-Sunday with Friday/Saturday off Job Description Field Service Technician TOMRA North America, a top International Reverse Vending and Recycling Company, is recruiting for a Field Service Technician worker to repair and maintain our machines in the Syracuse, NY area. The Field Service Tech will be responsible for traveling to the retail stores to analyze, test, troubleshoot, repair, or rebuild the mechanical and electrical components of our reverse vending machines (RVM). Individual will need to possess strong customer service skills and the ability to interact with all kinds of people. *** We provide you with a company vehicle *** Pay: $21.00 an hour, Quarterly bonus potential Full Benefits: Medical, Dental, Vision, 401K Mechanical: Have the ability to troubleshoot and repair or replace machine components. Electrical: Troubleshoot and replace electrical components. Ability to diagnose and repair electrical failures and faults Physical: Employee is required to use hands to assemble, disassemble and repair mechanical components. Must be able to regularly lift up to 50 lbs. and frequently push/pull up to 150 lbs. #indsrvny Qualifications Superb customer service and communication skills Must be proficient with laptops and windows Excellent safety record at previous employers Valid Drivers License Additional Information Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Health savings account Life insurance Paid time off Professional development assistance Retirement plan Tuition reimbursement Vision insurance

Why NYCANNA, LLC? NYCANNA, LLC, DBA THE BOTANIST is a subsidiary of Canopy USA, LLC, a leading vertically integrated, multi-state operator in the United States cannabis industry. With the transition of Acreage Holdings to Canopy USA, LLC in December 2024, Canopy USA, LLC is now positioned to consolidate operations across its three business units - Wana, Jetty, and Acreage - realizing synergies, cost savings, and supporting growth in state-legal markets across the U.S. Through coverage of key market segments including flower via Superflux, vape and concentrates via Jetty, edibles and beverages via Wana, and retail through The Botanist, Canopy USA, LLC is well positioned to accelerate growth with an emphasis on the Midwestern and Northeastern U.S. markets. As newly formed Canopy USA, LLC, we are building a stronger, more agile organization that will unlock greater opportunities across the growing US cannabis market. Who you'll work for : NYCANNA, LLC, DBA THE BOTANIST Our Culture: Here at Canopy USA, LLC, we believe in people first. We value our people and encourage continuous opportunities to learn, develop, and grow. We pride ourselves in innovation and passion for the cannabis industry. We are always looking for motivated people who share our vision to join our team. Think you have what it takes? Then come grow with us! About the Role Facilities Technician: The Facilities Technician (FT) provides the daily care and focused attention necessary to maintain a clean, efficient, and operational environment within the facility. FT will perform inspections, maintenance, and repairs on the cultivation facility and machinery as directed by the on-duty supervisor. FT will provide meaningful feedback to leadership to ensure maintenance is real time, strategic, and executed seamlessly within the operation. FT will interact with vendors and contractors to ensure all jobs leverage the appropriate level of expertise. Duties and Responsibilities: The main responsibilities of the Facilities Technician include all aspects of the facility and the departments within in terms of addressing the respective maintenance and repairs necessary to maximize production and prevent failures while maintaining the highest levels of cleanliness and sanitation inside the facility and production areas. * Responsible for daily sanitation procedures including bathrooms, hallways, break areas, and anything inside/outside of the facility. * Restocks all PPE (Personal Protective Equipment), trash, and restroom supplies throughout the building daily. * Perform minor repairs of all buildings and equipment with minimal supervision including but not limited to grow lights, fans, HVAC, plumbing, electrical, etc. * Perform major repairs at the direction and under the supervision of the Facilites Manager. Major repairs may include working alongside and coordinating with external contractors or licensed tradesmen. Repairs can include emergency situations and/or scheduled repairs. * Responsibly use and/or operate vehicles, tools, materials, parts, maintenance supplies and equipment when necessary and ensure that they are used safely, effectively, and efficiently. * Install and maintain new equipment (assembling racks, installing dehumidifiers, etc.) as directed by the Facilities Manager. * Troubleshoots minor maintenance issues involving electrical, structural, plumbing, and equipment. * Follow maintenance and repair schedules set forth by the Facilities Manager and ensure routine maintenance is performed in a timely and efficient manner. * Scheduling maintenance when the scope is outside realm of expertise, but continuously learning from contractors to eliminate the need for outside services when possible. * Other duties as assigned; scope of the job may change as necessitated by business demands. * Undertake occasional custodial and janitorial tasks (shoveling snow from the sidewalk) * Wash the employees' uniforms in our onsite washer/dryer area and sorts by employee ensuring that employees have clean uniforms for their shift every day. * May help in other departments as needed/Other duties as assigned. Administrative Duties: * Maintains accurate records of repairs, equipment cleaning, maintenance and calibration and any other facility systems related logs assigned by on-duty supervisor. * Promptly reports any system failure, malfunction, or facility damage to the Facilities Manager * Assists with the completion of daily, weekly, and monthly checklists on building equipment, and maintenance procedures * Must be able to adhere to facility SOPs. Additionally: Assist in the completion of secondary Facilities tasks according to company needs. Follow all aspects of the workplace safety program, biosafety program, and maintain compliance with all rules and regulations. And maintain a clean and safe environment on the production floor. Education and/or Work Experience * High school diploma or equivalent experience required. A Bachelor's Degree preferred. * Minimum of 2 years of experience in building and mechanical equipment maintenance and repair preferred. * A strong knowledge of trades- plumbing, electrical, carpentry, drywall, tile, miscellaneous repairs and maintenance or an acceptable equivalent combination of education and experience. * Knowledge of the marijuana industry strongly preferred or other highly regulated industry. * Work history showing flexibility and willingness to accept additional projects or challenges. Mandatory Qualifications: A successful candidate will need to be at 18 years of age and in compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States. Must complete State and Federal background checks and fingerprinting. Additional Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required Knowledge: * Basic Math required for inventory, projections, and measurements. * Knowledge of use and maintenance of industrial cleaning equipment and appliances Skills and Abilities: * Excellent time-management skills; Ability to effectively plan and prioritize * Ability to maintain confidentiality; Absolute reliability and honesty * Ability to focus; Attention to detail * Ability to work effectively as part of a team; Ability to communicate clearly and calmly * Ability to remain calm in periods of high stress or unusual activity * Skill at using computers * Mechanical skill Perks & Benefits: * Full suite of medical, dental, and vision insurance * Paid parental leave * 401 (k) * Paid Time Off * Short Term and Long-Term Disability * Employee Assistance Program * Employee life insurance and supplemental life * Spouse and child life and ADD&D * Pet insurance * FSA and HAS available * Based on eligibility. Schedule: * Day Shift Subject to change as business needs. Work Environment and Physical Demands: The work environment characteristics and physical demands described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be requested to enable individuals with disabilities to perform the essential functions. Manufacturing environment that requires extended time standing, walking, bending and reaching. Ability to carry up to 50lbs for up to a distance of 100ft may be required. Occasional extended and repetitive use of arms, hands and fingers to cut and manipulate small objects. Ability to work in a humid and pollinated environment. * Extended time standing, walking, bending, and reaching * Ability to lift and carry up to 50 pounds for a distance of 100 feet * Close visual focus required * This position occasionally requires the extended and repetitive use of arms, hands, and fingers to cut and manipulate small objects. * Must wear company-provided lab coats, hair/beard nets, gloves, surgical masks and safety glasses/ goggles/ splash shield, while working in the lab. * Must adhere to the Syracuse facility general hygiene requirements. E-Verify Participation Notice This Employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. What is E-Verify? E-Verify is an internet-based system that compares information from and employee's Form I-9, Employment Eligibility Verification, to data from the U.S. Department of Homeland Security and Social Security Administration records to confirm employment eligibility. Code of Conduct: All employees are expected to represent the values and maintain the standards contained in the Code of Conduct. NYCANNA, LLC is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, sexual orientation, disability, or protected Veteran status. We appreciate your interest in [Insert Entity Name]. If you need assistance with completing an online application due to a disability, please send a request to **************************. Please be sure to include "Accommodation Request" in the subject line.