Service technician jobs in Waukegan, IL

Details Department: Imaging Schedule: Rotating shifts: Mon-Fri 7:00am-3:30pm or 8:00am-4:30pm with rotating weekday and weekend on call shifts. Rotating Holiday call coverage as well. Primary coverage responsibility will be at All Saints Hospital with the expectation to also float to other IR departments in SE Wisconsin as necessary. Hospital: All Saints Hospital Location: Racine, WI Benefits Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your community Benefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance, location and salary range at the time of the offer. Responsibilities Assist with procedures and provide diagnostic aid by conducting organ or body scans on patients. Prepare and position patients and select anatomic and technical parameters accurately. Prepare and administer contrast media and medications within the accepted scope of practice and applicable state and federal regulations. Observe patient during procedure and reports abnormal activity. Monitor protocols and recommends updates or refinements as warranted. Follow radiation safety procedures and guidelines. Able to perform all specialized imaging procedures such as angio, complex vascular and nonvascular interventional and therapeutic procedures, along with assisting the Radiologist/PA. Ensure all activities comply with regulatory agency standards. Requirements Licensure / Certification / Registration: BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted. Radiologic Technologist specializing in Vascular-Intrvn Radiography credentialed from the American Registry of Radiologic Technologists (ARRT) obtained within 15 Months (1 1/4 year) of hire date or job transfer date required. General Radiography required in addition to Vascular Interventional Radiology required. State Radiology Technologist licensure issued by Wisconsin Radiography Examining Board required. General Radiology and state licensure required by hire or job transfer date. Registered Cardiovascular Invasive Specialist credentialed from the Cardiovascular Credentialing International (CCI) preferred. Education: High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required. Additional Preferences BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date. American Heart Association or American Red Cross accepted. • Radiologic Technologist specializing in Vascular-Intrvn Radiography credentialed from the American Registry of Radiologic Technologists (ARRT) obtained within 15 Months (1 1/4 year) of hire date or job transfer date. General Radiography required in addition to Vascular Interventional Radiology. State Radiology Technologist licensure issued by Wisconsin Radiography Examining Board required. General Radiology and state licensure required by hire or job transfer date. Why Join Our Team Ascension Wisconsin has been providing rewarding careers to healthcare professionals since 1848. Operating 17 hospital campuses and over 100 related healthcare facilities from Racine to Appleton, you will find opportunities that allow you to create a career path you love, all while delivering compassionate, personalized care to the communities we serve. Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states. Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you. Equal Employment Opportunity Employer Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the EEO Know Your Rights (English) poster or EEO Know Your Rights (Spanish) poster. As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension. Pay Non-Discrimination Notice Please note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants. This Ministry does not participate in E-Verify and therefore cannot employ STEM OPT candidates.

Do you want to make a difference in the lives of others? Your skills, experience, and passion are needed on our team. We are looking for a new on-call team members to join us, at our Crisis Recovery Center, to work as Crisis Services Technicians. This is an exciting opportunity to part of the expanding crisis services at the DuPage County Health Department! Located in our new Crisis Recovery Center on the DuPage County Campus in Wheaton, Crisis Services provides 24/7 crisis mental health services to county residents experiencing psychiatric crises or needing support for mental illness symptoms. Our team delivers top-notch care with rapid response times. Click to learn more about the Crisis Recovery Center. In this on-call position, you will be required to work at least three (3) shifts per month, having evening and weekend availability, working no more than 1000 hours per year. We offer a $2.00 per hour shift differential for our second shift and $2.50 for our overnight shift. Responsibilities Supports maintenance of a safe, therapeutic environment for clients seeking services through Crisis Recovery Center programs on the Substance Use Stabilization Unit, Adult Mental Health Unit, and Youth Mental Health Unit, as well as in Crisis Residential. Facilitates client safety and quality care in Crisis Residential and Crisis Recovery Center Programs, through completion of client rounding and belongings checks Assists with client medication observation in Crisis programming as needed Performs tasks related to maintaining environmental standards in crisis programming Assist in de-escalation of clients experiencing a mental health crisis through engagement with client and coordination with team members providing clinical intervention. Completion of required documentation within established timeframes, through use of an Electronic Client Record Participates in team meetings to assess clients' progress. Participates in emergency response activities as assigned. Requirements A qualified candidate must possess a valid State of Illinois Driver's license and have a good driving record. New employees are required to attend paid on-site, HR New Hire Orientation at our Central Public Health Center in Wheaton, during our day shift generally, from 8:00 am to 4:30 pm, for one week. Must have flexibility to work on the day shift for two weeks of additional training on site at the CRC. Must be 21 years of age. Experience preferred, but not required Salary $17.00 Hourly Job Type On-Call Service Unit Behavioral Health Services Department Emergency Services

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Compensation: $35.20 per hour Location: Woodridge, IL Schedule: Monday - Friday and occasional Saturdays 6:00 am to 2:30 pm Benefits: Medical, Dental, Vision, 401K, and much more! Responsibilities: The Fleet Mechanic position is responsible for preventive maintenance, troubleshooting, diagnosis and repair of fleet vehicles and equipment as assigned. Maintain, troubleshoot, and repair all fleet vehicles within assigned Primo Water North America locations. Respond to field service calls. Order mechanical components, services and parts and maintain inventory. Perform and document all phases of vehicle maintenance and repair, including diagnostics. Maintain communication with drivers and management regarding maintenance and service of vehicles and equipment. Maintain a unit history file for each vehicle. Qualifications: Ability to secure and/or maintain a CDL Class B with airbrake endorsement (for applicable CDL positions) BlueTriton is a certified CDL provider and can assist you with obtaining your Class B CDL High School Diploma, GED or equivalent work experience Service-oriented with strong face-to-face sales skills Ability to work independently, efficiently, and in different types of weather Ability to effectively interact with customers in a variety of settings Ability to lift and carry an average of 250+ units per day, each weighing up to 45 lbs., using product handling tools as appropriate, with or without a reasonable accommodation Ability to climb in and out of a commercial vehicle on average 40-55 times per day Ability to work an average 45-hour week or more, including variable start/end times Ability to alternately sit, stand, push, pull and walk all day, with or without a reasonable accommodation You must have the ability to obtain a DOT medical card for the purpose of working for BlueTriton BrandsYou must possess a clean driving record, which means: in the last 3 years, that you've only had 1 license, no driving-related suspension, revocation or cancellation, no disqualifying offenses, no more than 2 moving violations and no reckless driving incidents and in the last 3 years, no major driving offenses including DUI/DWI, refusal to test, leaving the scene, driving a commercial vehicle without a CDL, or at-fault fatal accident. Must be 21 years of age or older (DOT requirement) Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members.

Details Department:Imaging Schedule:Full Time|Evening|8 hr Shifts Hospital:All Saints Hospital *NEW GRADS Welcome!* #NextGenHealthcare Benefits Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your community Benefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance, location and salary range at the time of the offer. Responsibilities Perform computerized tomographic procedures for the diagnosis of disease and injury according to protocols established by radiologists. Prepare and position patients and select anatomic and technical parameters accurately. Prepare and administer contrast media and/or medications within the accepted scope of practice and applicable state and federal regulations. Observe patient during procedure and report abnormal activity. Monitor protocols and recommend updates or refinements as warranted. Follow radiation safety procedures and guidelines. Requirements Licensure / Certification / Registration: BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted. Radiologic Technologist credentialed from the Wisconsin Radiography Examining Board obtained prior to hire date or job transfer date required. One or more of the following required: Nuclear Medical Tech credentialed from the Nuclear Medicine Technology Certification Board (NMTCB) obtained prior to hire date or job transfer date. NMTCB(CT) Computed Tomography Specialty Certification or ARRT(CT) Radiologic Technologist specializing in Computed Tomography required in addition to CNMT Certified Nuclear Medicine Technologist Certification. Radiologic Technologist specializing in Radiography credentialed from the American Registry of Radiologic Technologists (ARRT) obtained prior to hire date or job transfer date. Nuclear Medicine or Radiation Therapy specialty also accepted. Radiologic Technologist specializing in Computed Tomography credentialed from the American Registry of Radiologic Technologists (ARRT) obtained prior to hire date or job transfer date. Education: High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required. Why Join Our Team Ascension Wisconsin has been providing rewarding careers to healthcare professionals since 1848. Operating 17 hospital campuses and over 100 related healthcare facilities from Racine to Appleton, you will find opportunities that allow you to create a career path you love, all while delivering compassionate, personalized care to the communities we serve. Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states. Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you. Equal Employment Opportunity Employer Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the EEO Know Your Rights (English) poster or EEO Know Your Rights (Spanish) poster. As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension. Pay Non-Discrimination Notice Please note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants. This Ministry does not participate in E-Verify and therefore cannot employ STEM OPT candidates.

The Fiberglasser is required to inspect, repair and rehab equipment throughout the Park. Responsibilities: KEY DUTIES AND RESPONSIBILITIES: Perform general fiberglass repairs on equipment Perform automotive paint refinishing Complete safety inspections of Park equipment Maintain padding and upholstery of equipment Document work performed Maintain a safe and clean work environment Assist with Park operation responsibilities, as needed Qualifications: SKILLS AND QUALIFICATIONS: Minimum of one year experience in body/fiberglass repair Must possess mechanical aptitude Must be able to work at various heights including in excess of 150 feet Must be capable of climbing ladders, scaffolding, buildings and ride structures Must possess strong safety sensitivity Must have a high school diploma or equivalent as well as additional training or background in fiberglass repair and body work Must possess a willingness and ability to work varied shifts and schedules, including nights, weekends, and holidays Must possess a valid driver's license Must be at least 18 years old

The electrician technician will handle troubleshooting and repairs to keep equipment running and minimize downtime while supporting all other members of the maintenance group with any other repairs, projects, etc. deemed necessary by the department manager. Proficient with electrical troubleshooting and repairs. Test and replace fuses. Test and replace solenoids. Test and replace contactors / relays. Test and replace proximity / limit switches. Reset and replace breakers / motor starters. Adjust and replace photo eyes. Able to make conduit runs, wire pulls, and wire terminations. Proficient in performing pneumatic and hydraulic system repairs. Proficient working with single phase / 3 phase / 110V, 240V, 277V, 480V, and 24V control systems. Able to work with Voltmeter/Amp Meter to troubleshoot electrical systems. Proficient reading schematics/blueprints to troubleshoot electrical systems. Able to troubleshoot AC / DC control circuits. Able to troubleshoot motors and drives, then replace if needed. Proficient at troubleshooting PLC's and ladder logic. Able to cross reference and change out electrical devices with other brands. Able to troubleshoot by phone while communicating with other maintenance personnel or machine techs. Able to circumvent problems and find ways to keep machines running. Able to perform project work with little supervision. Able to communicate and problem solve with foreign and domestic techs by phone and online support. Perform electrical building maintenance. Assist with electrical PM as needed. Proficient with mechanical troubleshooting and repairs. Fluent with schematics and blueprints. 480V 3 phase wiring expertise. Comfortable working independently. In addition to the functions listed above, the employee is expected to: exercise honesty, integrity and respect with all clients and co-workers, maintain a professional appearance and demeanor, demonstrate a positive attitude, communicate effectively with co-workers and clients, work with accuracy, efficiency, and attention to detail, maintain good attendance by working when and where directed, work safely in compliance with all safety policies, respect the work environment and keep it as neat and clean as possible, and exercise initiative to learn new skills and tasks and to help co-workers when possible. The employee is also expected to perform such other duties and functions as required and assigned from time to time. Qualifications: High School Diploma/GED preferred. Good verbal and written communication skills with ability to communicate effectively with contractors, service techs (onsite/phone support), and fellow employees. Understands various aspects of an industrial facility including structural, electrical, plumbing systems, etc. Ability to work additional hours and weekends as necessary to meet business plan objectives. Proficiency in MS Excel & Word is a plus. Proficient with industrial trouble shooting skills. Proficient with various software and drives. Fluent with schematics and blueprints. 480V 3 phase wiring experience. Proficiency in MS Excel & Word is a plus Strong industrial trouble shooting skills. CNC background a plus. 4 years manufacturing experience preferred. Demonstration of minimum proficiency with the English language in order to ensure effective new hire training and on-going communications about safety and quality issues. Machines/Tools/Equipment: Voltmeter, conduit benders, assortment of hand and small power tools, computer, basic office equipment, tow motor, etc. Salary-$35-$45 depending on experience. Safety: Employees are expected to follow all facility safety guidelines that include adhering to GMP (Good Manufacturing Practices) and Food Safety as outlined during their training. Working Conditions: Manufacturing environment working around machinery, moving equipment, and loud noise (hearing protection required) Environment is not climate-controlled and there is exposure to a wide range of temperatures (temperature varies depending on work/machine location and ranges from 50 degree F to 100 degree F). Possibility of outside work in all types of weather conditions (including heat, cold, rain, and snow). The proposed salary range for this position is $35-$45 per hour depending on experience. WE ARE AN EQUAL OPPORTUNITY EMPLOYER. We strive to create and maintain an inclusive and diverse workforce where everyone feels valued, respected, and included. We consider applicants for all positions without regard to age, race, color, religion, creed, sex, national origin, disability, sexual orientation, citizenship, veteran status, gender identity or any other legally protected status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of a job.

Company & Benefits Information At Blain's Farm & Fleet we believe everyone deserves the opportunity to have a job they love, work in a great environment, grow their career & enjoy a positive balance. As a family-owned retailer we take pride in offering a competitive benefit package designed to support you & your life. It is one of the reasons we have been named a Forbes Best Employer for seven consecutive years! Associates hired into a full-time role will become eligible for the following benefits effective their 91 st day of full-time employment: Medical, Prescription, Dental, Vision, Short & Long Term Disability, Life Insurance, Ancillary Benefits, Identity Theft Protection, Pet Insurance, Etc. All major Holidays & Birthday off Advanced Leadership Training Programs: build the skills to grow your career Associate discount on name brands like Carhartt, Under Armour, STIHL, Milwaukee Tool, DeWalt & much more! Internal recognition programs that support an engaged workplace Profit Sharing 401(K) with company match Paid ASE testing and certifications Compensation Saturday & Sunday weekend premium pay $2.50 per hour Starting pay ranges from $17.00 - $23.00/hour with annual performance-based merit raises* The pay listed for this position may vary based on experience. Please note, compensation decisions are contingent on the facts and conditions for each job opening. We take into consideration the minimum requirements outlined in the job description, such as, training and experience, the position's work location, required travel (if any), and external market conditions when determining the final salary for potential new hires. Please note salary estimates published via alternate online job boards may not be a true representation of the actual pay range offered for this position. Please refer to the Blain's Farm & Fleet position description for accurate pay range information. Job Duties As a Service Center Automotive Technician, you'll perform a wide range of services and duties in our Automotive Service Center. This can include, but is not limited to: Excellent customer service Repair and install tires Balance wheels Install batteries, head lamps and other basic automotive parts Perform oil changes Brake system repair Repair starting and charging systems Steering and Suspension Shock/strut installation Alignments Installation of trailer hitches and wiring Other duties assigned with progressive on the job training Qualifications Must possess a valid driver's license Must have great communication skills Ability to work evenings when needed and at least every other weekend Ability to pass pre-employment drug screening and background checks Ability to read and speak English Ability to effectively communicate with customers and coworkers Must be 18 years of age or older Prior auto repair experience is preferred Prior retail experience preferred *Michigan Stores Only* ASE A4 and A6 Certifications required for Tech Level II and ASE A3, A4, A5 and A6 Certifications required for Tech Level III OR equivalent Michigan certifications. EEO Statement Blain Supply, Inc and Blain's Farm and Fleet (collectively "Blain's") is proud to be an Equal Opportunity Employer. We recognize the importance of diversity and creating an inclusive culture in order to leverage the skills and talents of all people to the mutual advantage of each individual and the organization. Blain's does not discriminate against applicants or employees on the basis of race, religion, color, sex (including pregnancy and sexual harassment), sexual orientation, gender identity, national origin, age, marital status, disability, military or veteran status, or any applicable legally protected status. Our goal is to continue to be recognized as an employer of choice and we have received Forbes Best Mid-Sized company to work for an unprecedented 7 years in a row.

Field Service Technician Opportunities - Mechanical & Controls (PLC) Pay: Mechanical Field Service Technician: Up to $40/hr Controls Field Service Technician: Up to $45-$50/hr Travel Bonus: Eligible for weekday and weekend travel incentives Benefits: Medical, Dental, Vision (begin on day 31), and 401(k) with company match Overview Join a team known for designing and integrating custom automation systems used by manufacturers worldwide. We're hiring two experienced Field Service Technicians - one specializing in mechanical troubleshooting and the other in electrical/controls (PLC) troubleshooting. Both roles involve traveling to customer sites to install, repair, and maintain complex automation equipment, ensuring it runs smoothly and efficiently. You'll represent our company in the field, working directly with customers to resolve issues, recommend improvements, and keep their production running strong. What You'll Do Common Responsibilities (Both Roles): Troubleshoot, repair, and service automated machinery at customer facilities (domestic and international). Diagnose mechanical and/or electrical issues, ensuring minimal downtime. Communicate effectively with customers to resolve service needs and provide technical guidance. Complete detailed service and expense reports and follow up to ensure customer satisfaction. Participate in the on-call rotation and support warranty/non-warranty service requests. Mechanical Field Service Technician If you enjoy hands-on mechanical work and thrive on keeping machines running, this role offers a mix of precision troubleshooting and travel. Key Skills: Strong mechanical aptitude and electrical familiarity. Experience with hand tools, gauges, and measuring devices. Ability to read and interpret mechanical/electrical schematics. Background in tool & die, mechanical systems, or related fields. 💰 Pay: Up to $40/hr Controls Field Service Technician For those skilled in automation and PLC troubleshooting, this position focuses on controls, programming, and system integration. Key Skills: Proficiency with Rockwell PLCs, HMIs, servos, VFDs, and Ethernet/Profibus networks. Ability to make online programming changes and debug equipment using trends and diagnostic tools. Strong understanding of NEC, NFPA 79, and related electrical standards. Experience in both electrical and mechanical troubleshooting within automation systems. 💰 Pay: Up to $45-$50/hr Travel Bonuses Weekday: $50/day for each overnight stay after working more than 4 hours on-site. Weekend: $150/day (international) or $100/day (domestic, including Canada, Mexico, Puerto Rico, Costa Rica, and the Dominican Republic).

About the Company HSG Tech Inc. is an American Subsidiary of HSG Laser who is a fast-growing supplier in the global metal forming solution industry. We believe intelligent manufacturing changes future. Customers in 100+ countries have used and recognized our equipment and service. Please visit the web site for details about HSG: **************** About the Role The Service Engineer position is the primary point of contact responsible for training, installation and maintenance of all HSG tech machinery in our Chicago showcase space and equipment purchased by HSG Tech customers in the US region. Reporting directly to the Service Manager in the US, this position will manage technical issues, maintain customer satisfaction, provide monthly maintenance support, promote value add-on services and provide training support. Business travel will be a requirement for this position. Responsibilities Provide key objective management (proper machinery installation, proper accessory management and proper understanding of service data) Optimize work order organization, safe tool use and customer data reporting. Demonstrate understanding of expense reimbursement documentation and customer service evaluations Partner with internal Sales, Marketing, Finance, Customer Service and R&D teams to support stakeholder objectives On-time completion of equipment installation, commission and maintenance tasks while following the company's strict safety and quality guidelines Analyze and find root cause of maintenance impediments, debug system errors and propose system improvements. Participate and prepare company held trainings regarding technical process, company regulation and technician job duties. Conduct customer visits monthly for routine service maintenance while promoting related value add-on services. Provide one-to-one training and guidance for new hired service team members. Qualifications Two years of working experience in related industry (Fiber Laser experience highly preferred) Technical know-how: installation, debugging and maintenance on 6KW equipment Comprehension of circuit diagrams Familiar with CAD or SOLIDWORKS design software Familiar with mechanical principles Detail & deadline-oriented; well organized Excellent verbal and written communication skills Good interpersonal skills; ability to interact with staff across matrix partners Electrician's certification Fitter's certification Job level and pay is dependent on experience. Pay ranges and level progressions: Service Technician ($29-35 hourly) Service Engineer ($36-41 hourly) Senior Service Engineer ($42-48 hourly) HSG is committed to ensuring equal employment opportunities to all qualified persons without regard to race (including associated hairstyles), color, religion, sex, gender identity, sexual orientation, national origin, ancestry, citizenship status, age, marital status, genetic information, military status, unfavorable discharge from military service, order of protection status, pregnancy, arrest record, disability, or any other status protected by applicable law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. HSG participates in E-Verify and conducts pre-employment drug testing and background checks as part of our hiring process.

Field Service Engineer Waukesha, WI (onsite and 50% travel) Direct Hire You will be providing service to optimize the production from our machines at their facilities. Because of that, our service engineers are in high demand and provide a consistent factory presence on site. A Field Service Engineer is primarily responsible for performing maintenance and repairs on our equipment as well as supporting project start-up installations at client locations across the US and Canada. We provide an in-house repair service for our customers as well as an innovation space for customers to learn from our experienced technologists, and test & train with their formulas & ingredients on our equipment. And of course, we stock a lot of spare parts for our customers in the USA and in Canada. Responsibilities Maintenance and Repair: Performing routine maintenance and diagnosing problems. Repairing or replacing defective parts to ensure functionality. Troubleshooting: Quickly identifying the source of problems and implementing effective solutions for mechanical, electrical, pneumatic, and electronic control systems. Installation and Setup: Installing and configuring equipment and systems according to specifications. Customer Support: Providing training and support to the customer's own in-house technicians on how to use the equipment effectively and perform routine maintenance. Documentation: Keeping detailed records of services performed, parts used, and hours worked. Compliance and Safety: Ensuring all work complies with company policies and safety standards. Other duties As required. Travel Requirements: Willingness to travel to client sites 50% minimum. Travel is primarily by automobile, however some air travel both domestically and international may be required. Skills and Abilities (Required) The ideal candidate should be a highly driven and self-disciplined person who can work independently and occasionally manage tight deadlines effectively. Must be able to work in an industrial production shop floor environment and be willing to work overtime hours when required. Education: Certificate or degree in a technical field such as electronics, engineering, or similar technology via Trade school, Technical School, College, or Military Technical School. Experience: 1+ years in a technical field working with hand tools and basic electrical test equipment. Technical Skills: Extensive knowledge of machinery ideally in the food/beverage/packaging industry and demonstrated proficiency in electrical and mechanical skills. Ability to read diagrams, schematic drawings, engineering specifications and manuals to determine work procedures. Communication Skills: Strong ability to communicate effectively with customers and team members. Problem-Solving Skills: Excellent analytical and problem-solving abilities. Physical Requirements: Capability to perform physical tasks, which may include lifting heavy equipment (occasionally over 50 lbs.). Driver's License: Required current valid driver's license and clean history. Experience (Preferred): Previous experience working on food manufacturing equipment. A working knowledge of Servo drives, variable frequency drives (VFDs), or PLCs is a plus. Compensation and Rewards: Competitive wages and profit-sharing plan 15 days PTO in the first year Double pay in case of Sunday work Health care package (medical, dental, vision, disability) Open and honest family-like work atmosphere “Ascendo is a certified minority owned staffing firm, we welcome and celebrate diversity. Ascendo is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, retaliation, parental status, military service or any non-merit factor.”

Boiler Field Service Technician - Domestic & International (Heavy Travel) Full-Time | 75-90% Travel | OT Available | Per Diem | Company Card Provided Are you a self-starting, hands-on technician who thrives on the road and loves solving complex mechanical, electrical, and controls challenges? We're hiring an experienced Boiler Field Service Technician to join a fast-growing team supporting industrial clients across the U.S. and around the world. This role offers variety, autonomy, extensive travel, and the chance to work on high-performance steam generators, thermal fluid heaters, and industrial combustion systems. What You'll Do Perform installations, commissioning, and start-ups of industrial boiler and steam-generating equipment Troubleshoot and repair mechanical, electrical, and controls issues at customer sites Work with PLC/HMI systems (connect, navigate, and troubleshoot-not write code) Conduct combustion testing and tune burners using analyzers and meters Provide remote technical support when not traveling Complete field service reports, documentation, and communicate findings clearly Lead onsite activities and interact professionally with customers and contractors Travel across the U.S. and internationally (some trips a few days, some multiple weeks) What We're Looking For Boiler or burner experience strongly preferred 3+ years in field service, industrial maintenance, or related technical roles Strong electrical & mechanical troubleshooting skills Ability to read electrical wiring diagrams, mechanical drawings, and piping diagrams Comfort with PLC/HMI interfaces (Siemens, Allen-Bradley, RS Logix, etc.) Experience using hand tools, test meters, and combustion analyzers Self-motivated, professional, and able to work independently on customer sites Valid passport or ability to obtain one (international travel required) OSHA 10/30, TWIC, or related certifications are a plus Travel Expectations 75-90% travel Combination of air and driving, depending on location Domestic + international work Trips may range from 2 days to 3+ weeks depending on customer needs

*** Milwaukee-based manufacturing team seeks a hands-on pro who's not afraid to get a little greasy. *** The Short Scoop: Milwaukee-based manufacturing team seeks a hands-on pro who's not afraid to get a little greasy. As a Maintenance Technician, you'll be elbow-deep in the machinery-getting dirty, fixing what's broken, and keeping the line rolling. If you thrive on troubleshooting and don't mind a bit of grit under your nails, this is where your mechanical mindset makes a real impact. Location: Milwaukee, WI Status: 1st Shift Why You Should Apply Be a key player in a respected U.S. based manufacturing company Work in a well-equipped facility with a tight-knit maintenance team Tackle a wide variety of equipment challenges, where no two days are the same Collaborate with engineering and contractors on smart upgrades The outstanding benefits package includes the following Preventative exams coverage. Prescription Drug options. Imaging, Scans, Test and X-Rays ER, Urgent Care, and Doctor visits. PPO, In-Network, and Out-Of-Network. Dental Insurance. Vision Insurance. Basic Life and AD&D Voluntary Term Life Insurance Short-Term Disability and Long-Term Disability. Employee Assistance Programs. Flexible Spending Accounts. Travel Accident Insurance. Pet Insurance. 401K Plan - with a 6% match, and highly praised investment options, highlighting our investment in your future. Vacation and PTO Compensation range Min $32.30 Mid $38.00 Max $43.70 What you'll be doing Diagnose, repair, and install mechanical, hydraulic, pneumatic, and electrical systems. Conduct preventative maintenance across foundry, machining, injection molding, and other production equipment Work closely with contractors and engineering staff on new systems and machine enhancements Use technical documentation and OEM specs to troubleshoot and resolve issues Keep parts inventories up to date and downtime to a minimum About You Be able to do the job as described Comfortable working with low voltage and in tight spaces Skilled in interpreting blueprints, manuals, and schematics Familiar with Microsoft Office and industrial documentation PLC/automation experience is a plus How To Apply: We'd love to see your resume, but we don't need it to have a conversation. It is as easy as one, two, three! Send an email directly to me, *********************************** and tell me why you're interested. Message me here on LinkedIn. If you do have your resume ready to go, apply now on this site. Setting Expectations: We'd love to help every single person who is interested and applies to this role. Unfortunately, too many people apply who don't appear capable of doing the job. We apologize in advance, but we will not be able to respond directly to all submissions. Sponsorship is not an option for this role. This client is an Equal Opportunity Employer This is NOT A REMOTE ROLE! TBI Id: 25-14034, Maintenance Technician / Industrial Maintenance Mechanic

Dürr CTS (Clean Technology Systems) develops advanced environmental technologies to make industrial production cleaner, safer, and more efficient. Across all our product lines, Dürr CTS offers responsive, local, and skilled service teams, delivering customer-focused support in maintenance, troubleshooting, spare parts, and plant modifications. Since November 1st, 2025, Dürr CTS has operated independently, with 1,300 employees across 12 countries. We provide reliable and innovative environmental technology solutions, helping customers worldwide meet their regulatory and sustainability goals. Our Portfolio Includes: Air Pollution Control: thermal oxidation, sorptive processes, particulate matter separation Noise Abatement: Silencer products, filtration, gas turbine inlet and exhaust systems by Dürr Universal Decentral Power Generation: Organic Rankine Cycle systems with Cyplan ORC We serve a wide range of industries, including chemical, pharmaceutical, food, automotive, energy, surface coating, and many more, providing tailored solutions that help customers meet environmental regulations, reduce emissions, ensure operational reliability, and improve sustainability. We're Looking for People Who: Can be the face of our company to our customers Love to travel and experience new work environments Enjoy navigating challenges that require you to think on your feet Have a high mechanical aptitude Crave personal development and improvement What We Do: Durr Universal provides noise and environmental solutions to our customers. For more than 65 years, we have supported our customers through our design, manufacturing, and installation of acoustic and emissions systems. We work to continually improve our knowledge of our equipment, our customers' processes, and how the two interact. Why We're in Business: Durr Universal provides value-added solutions to our customers. We pride ourselves on the thoroughness of our pre-sale consultation and solution development, the quality and longevity of our equipment, and our best-in-class service from initial customer inquiry through the life of the equipment. We seek long-term partnerships with customers that value our approach. This position will oversee all activities of both Durr Universal internal and Field Service contractors and report on the performance of the department functions with appropriate personnel in the company. This position will require working with the Field Service Technicians, Project Managers, Sales, Engineering, 3rd party Contractors, and site customers to ensure overall contract requirements are successfully met for field service work, warranty repair, quality inspection, and technical supervision. This position requires travel from 70% to 90% to various potential customer sites to assist in quoting, supervision, auditing, inspection, etc. of dedicated Field Service Teams, along with assisting and overseeing field service project work scopes and related scopes. The Field Service Supervisor/TFA must plan, organize, direct, and manage the work of individual field service technicians and contractors in various field operations. Essential Functions: Put safety first in everything you do and help ensure our colleagues, customers, and business partners remain safe at all times. Be the liaison between the customer, contractor, and Dürr staff Assist in the installation of Dürr and other equipment Manage all 3rd party subcontractors, ensure work is done safely, properly, and on time and in budget. Work with site personnel and internal personnel on project issues and resolve them effectively. Develop cost estimates and customer proposals for field installation projects. Creation and deployment of mobilization schedules for the field service department. Assist in equipment commissioning and documentation as required Participate in contract reviews and kick-off meetings involving the field service scope of work. Assist with parts procurement as needed When required provide customer training on installed equipment Provide equipment modular build support as required Experience and Skills: Must make safety a priority every day AWS Certified Welding Inspector (CWI) is a plus Painting and coatings certification/ experience is a plus OSHA 10 or 30 Hour Safety Trained Familiar with MS Word, Excel, and PowerPoint Desire to travel Ability to read and interpret engineering drawings and technical documents (i.e. layout, sectional drawings) Excellent written and verbal communication skills Desire to work hands-on in an industrial environment Proven mechanical aptitude - including the use of various machining tools, welding equipment and methods, and various testing equipment Demonstrated experience with installation and inspection of large steel structures (ducting and tall stacks, steel platforms) and their welding processes, inspection of welds, and industrial coatings Working experience with safe lifting & rigging methods Fully capable with Microsoft Office software package Flexible to adapt to same-day and next-day changes Ideal candidate will have experience developing RFQ/RFPs for work that would be subcontracted to 3rd party vendors. Experience with steel fabrication and custom equipment manufacturing. Position can be located anywhere near a major airport Dürr CTS, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. We maintain a drug-free workplace and perform pre-employment drug and alcohol testing. Note to all Staffing Agencies: Dürr CTS, Inc. has a team of dedicated Human Resources professionals who are responsible for all hiring needs. Our practice is to partner and work with our approved vendors on an as-needed basis. We do not accept resumes from agencies that are not on our preferred vendor list and have not signed our Recruiting and Permanent Placement Contract. Any resumes submitted from unapproved vendors will be considered unsolicited, and Dürr will not be obligated to pay a referral fee.

Role: Hemmersbach is seeking a highly motivated and customer-oriented Field Technician to join our team. As a Field Technician, you will be responsible for providing exceptional technical support to our clients, both consumers, and enterprises, in a timely and efficient manner. The ideal candidate will have experience working with desktops, laptops, RPOS, and printers. This role requires a high level of customer service skills, as you will be the face of Hemmersbach in our clients' locations. You must be comfortable with long-distance driving, as this is a high-demand role that may vary depending on location. Responsibilities: Providing excellent customer service by communicating clearly and professionally with clients, ensuring they are satisfied with the support provided. This includes responding promptly to client requests for technical support, either on-site or remotely, depending on the client's needs and the project's scope. Performing equipment installations, upgrades, and repairs for clients' desktops, laptops, RPOS. and printers. Willingness to learn and become part of a role that will include Data Centers, servers, and other IT equipment. Providing technical support for HP servers and data center equipment, including installation, configuration, and troubleshooting of hardware, software, and network issues. This includes diagnosing and resolving server and data center-related issues, ensuring client satisfaction by delivering exceptional customer service. Provide day to day support at the customer locations within a geographical region(s). Support customers in technical problems they have with their technical equipment. Required skills: 2-3 years of experience replacing hardware components (Motherboards, Hard drives, etc). Technical certifications such as A+ or Network+ are preferred. Problem solving. Customer focus. Willingness to be in a On Call rotation with other team members, including working after hours and weekends. Valid drivers license, with reliable vehicle with acceptable insurance. Requirements: 18 months of IT experience (or equivalent) Experience in Windows 7-11, MS Active Directory, utilization of GPOs, MS Office 365, PC hardware installation and troubleshooting, enterprise anti-virus solutions and IT ticketing systems. Driving licence Excellent time management skill Benefits: Buddy program Dental insurance Health/ Medical insurance Internal career development program Life insurance Mobile working Onboarding program Unlimited employment contract Be part of Us Hemmersbach provides IT infrastructure services in more than 190 countries with 50 own subsidiaries. We deliver exclusively for the leading companies in the IT industry. We go the extra mile - we not only simply enthuse our customers, but also make the world a better place: 20% of our profits go into our Direct Actions Hemmersbach Rhino Force and Hemmersbach Kids' Family. That's why Hemmersbach is The Social Purpose IT Company.

We are seeking a dedicated and skilled Field Service Engineer to join our team. In this role, you will be responsible for providing on-site support and maintenance for battery energy storage systems (BESS). The ideal candidate will possess a strong background in battery system maintenance and be proficient in troubleshooting and repairing energy storage systems. Your expertise will ensure the reliability and efficiency of our operations while delivering exceptional service to our clients. Duties Perform routine inspections, maintenance, repairs, and replacements on battery storage units in the field. Troubleshoot and diagnose issues related to low voltage communication and high voltage energy storage units using computer software, multimeters, etc. Install components such as batteries, inverters, and power regulation equipment according to project specifications and safety codes. Commission systems to ensure compliance with performance and safety standards. Collaborate with team members to develop solutions for complex technical challenges. Communicate effectively with clients to provide updates on service status and recommendations. Document detailed records of system installation, operation, used parts, and maintenance activities. Collaborate with project managers and engineers to complete other related tasks. Qualifications Bachelor's degree with 0-5 years of experience in Electrical Engineering or a related field. Strong understanding of low voltage communication systems and high voltage utility power systems. Valid driver's license. Proficient in using electrical tools such as multimeters. Able to lift up to 50 lbs, climb stairs and ladders, and work outdoors. Responsible and willing to travel for at least 75% of work time. Ability to communicate effectively in English, both verbally and in writing. Nice to have but not required Experience with BESS and inverters. Background in commercial and industrial utility systems. Able to communicate in Mandarin. It's a contract role with high possibility to extend to full-time. We are happy to offer sponsorship for our full-time employee.

Do you love to travel? Passionate about serving as a brand ambassador? Feel fulfilled by solving technical challenges? Our field service team specializes in keeping our machine performance strong. Our team is dedicated to staying calm while acting quickly, finding solutions, and exceeding customer expectations. We offer rewarding, challenging opportunities throughout the world, across multiple packaging segments. If you are energized by providing best-in-class customer experiences and strive for advanced technical skills, we want to talk to you. Do we have your attention? Keep reading. TechniBlend is looking for a self-starter, ambitious Field Service Technician to deliver world-class technical customer service and support. This person will work directly within the Technical Service Group and manage multiple customers and projects. Service Technicians frequently correspond with customers; maintain oversight on equipment, service machinery, and travel to customer facilities. The goal is to drive service success that improves customer satisfaction, maximizes customer retention and increases profitability. Are you passionate about this work? • Support TechniBlend (OEM) equipment and systems at customer production facilities. • Diagnose and troubleshoot mechanical, electrical and controls technical errors with equipment and determine and execute proper solutions. • Remotely monitor the effectiveness and performance of equipment via remote access software and direct communication with customers. • Conduct testing and commissioning of control systems, ensuring functionality, reliability, and safety. • Perform modifications, upgrades, and routine maintenance to existing equipment to meet customer needs and requirements. • Provide best-in-class service with customers and collaborate professionally fellow technical service and engineering personnel. • Provide training to the customers on equipment operations and maintenance procedures. • Produce timely, accurate and detailed service reports. • Comprehend customer requirements and make appropriate recommendations and modifications as required. • Manage field service appointments and customer troubleshooting requests through Salesforce - Field Service Lightning. • Ability to manage travel and expenses through expense management software while following company policies. What's in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. Total compensation includes your salary, comprehensive medical/dental programs, as well as life insurance, a generous paid time off program, and a retirement savings plan with a company match. And because we understand the importance of feeling protected, there is no waiting period for benefits - you are eligible on your first day of employment! If this sounds like you, we want to connect! • Proven field service and technical service experience and aptitude • Ability to troubleshoot, test, repair and service technical equipment • Ability to work flexible shifts and adapt to changing work schedules • Willingness to travel up to 70% of the time (primarily domestic / USA) • Ability to work extended hours and weekends • Able to effectively organize, schedule, and carry out work assignments with minimal supervision • Read and interpret technical manuals, blueprints, diagrams • Understanding of the safe operation of hand tools and power equipment • Effective communication skills, verbal as well as written • Well-developed skills in problem solving and troubleshooting • Broad technical knowledge of process and/or industrial automation • Mechanical aptitude and ability to perform mechanical and physical tasks • Ability to support customers during and after hours on a scheduled basis ADDITIONAL SKILLS: • Brewing, Food & Beverage processing equipment experience a plus • Ambitious, fun & flexible • Organized, with strong time management skills and a strong work ethic • Technical curiosity is critical • High attention to detail EDUCATION AND EXPERIENCE: • Requesting (not required) 3 to 5 years of experience in installation, industrial maintenance, and troubleshooting of processing systems preferred. • Associates or technical degree in engineering or related field required. - Prefer higher level education in engineering, electronics, programming, etc. • Proficient knowledge of mechanical, electrical and process systems used in the brewing, food & beverage production industry. • Experience with various control systems and PLCs (Programmable Logic Controllers), especially Rockwell Automation / Allen-Bradley systems. • Experience with mechanical process equipment such as pumps, valves, meters and other components. • Computer knowledge: Microsoft Office, Excel and Word, Salesforce, Syteline Pro Mach, Inc. was named to the Inc. 5,000 list of the fastest growing private companies in the U.S. seven times. We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities. We have the rewards, opportunities, and the market strength of a large organization combined with the entrepreneurial culture of a small, fast-paced company. You will enjoy the benefits of working with a growing company that competes globally with the personal touch and feel of a smaller company where you can make an impact every day. Curious about life at ProMach? Follow us on LinkedIn, Twitter, and Instagram! ProMach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. #TEC #INTEC

We are Toshiba. We have an unwavering drive to make and do things that lead to a better world. At Toshiba, we commit to raising quality of life for people around the world, ensuring progress that is in harmony with our planet. Our core values include: Do the Right Thing, Look for a better way, Always consider the impact and Create Together. Toshiba America Energy Systems Corporation (TAES) provides energy industry solutions - new equipment, retrofits, maintenance, outage planning and more - for current and future power generation needs in the Americas, including thermal, hydro and nuclear power plants. Position Summary We are seeking a Field Service Repair Technician to work out of our Milwaukee Service Center. The FS Repair Technician involves troubleshooting and repairing turbines, stators, and rotors in generators at customer locations. The candidate will learn to operate test equipment, diagnose issues, and determine necessary repairs. Responsibilities include assisting in testing components, using precision measuring instruments, and working under close supervision with inspections. The role also involves coordinating field service tooling and maintaining a professional image at job sites. The candidate should have a strong desire to advance to the Generator Technician position. Essential Duties Help to construct and operate testing equipment to identify problems and determine necessary field service. Assist with paperwork, including test data, daily logs, job information, timesheets, and final reports. Learn procedures for rewinding, re-wedging, re-blocking, rebuilding stator bars/coils or cores, and repairing turbines and related components. Gain knowledge in winding insulation, curing, cooling stator bars/coils, and blocking bars/coils. Build and assemble slot wedges into stator core grooves. Acquire skills in stator core construction methods, including flooding, end winding, side bar packing, top and bottom filler, and resistance temperature detectors. Work with various resins and solvents. Become proficient with various hand and power tools. Learn to operate a portable milling machine and wire welding procedures. Help inventory and ensure supplies and equipment are in good working order before and after job site visits. Operate overhead cranes and lift trucks properly. Maintain a simplified tooling process by ensuring all responsible parties for a field project are aware of all tools sent out. Prepare purchase requisitions for tooling, materials, and chemicals, coordinating with various suppliers. Customize tooling designs or fabrication with various departments. Coordinate shipping and receiving of field service tooling to job sites. Inspect tools, including calibration and restocking, and follow procedures for testing electrical equipment. Coordinate the calibration of tooling and fabricate or modify as needed. Develop a mindset for service and courtesy. Perform other tasks requiring similar or lesser skills, usually of short duration to meet field service requirements. Travel Up to 90% Education and Required Experience High School Diploma or Equivalent. Trade or Technical Degree in a related field preferred. 1-3 years of experience with working knowledge of shop practices and basic electrical and mechanical fundamentals, gained through vocational training. Minimum 3 years previous experience in a similar or related role or 1-3 years' experience in power generation field service, in lieu of vocational training. Cooperative work crew skills, as work is performed at field locations. Proficient in basic arithmetic operations, including decimals and fractions, and able to use formulas, blueprints, specifications, and tables. Skilled in using various precision measuring instruments. Familiarity with hand tools. Capable of operating overhead cranes and fork trucks. Proficient in Microsoft Office (Word, Excel, Outlook) and able to learn new software programs, such as Oracle for purchase requisitions. Previous experience in millwright, carpentry, welding, electrical, or HVAC roles preferred. Knowledgeable in Asbestos abatement and lead awareness training preferred. Possess a valid driver's license for travel to customer sites. Must be able to pass requirements to gain unescorted access to a nuclear facility. Must be able to work without restriction throughout U.S, Canada, and Mexico. Physical Requirements (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.) The employee must be able to lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include Close vision, Distance vision and Ability to adjust focus. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to finger, handle, or feel. The employee frequently is required to talk or hear. The employee is occasionally required to sit; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and taste or smell. Work Environment While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts, fumes, or airborne particles, and toxic or caustic chemicals. The employee is occasionally exposed to work in high, precarious places, and risk of shock. The employee is occasionally exposed to extreme heat, extreme cold and wet, humid conditions. The noise level in the work environment is frequently loud. Additional Info Toshiba employees enjoy a comprehensive compensation and benefit package including an annual bonus, a generous 401k match, health, and wellness programs as well as generous t ime off. Toshiba is an Equal Opportunity Employer.

Hourly Pay Range: $37.47 - $58.08 - The hourly pay rate offered is determined by a candidate's expertise and years of experience, among other factors. Sign on bonus: $15,000 - $20,000 Interventional Procedures Technologist Location: Elmhurst, IL Full Time/Part Time: Full time Hours: Monday-Friday, 7am - 5:30pm (Four 10 hr shifts/wk. Rotating days off.) On-call: 6-7 days/month, rotating What you will do: Assists physician in conducting diagnostics and/or invasive procedures by preparing equipment and patients for procedures, and attending to patients' needs according to established policies and procedures. Cleans and prepares a variety of sterile and non-sterile equipment, catheters and the like, and troubleshoots equipment to ensure same is working properly. What you will need: IEMA ARRT CPR ACLS within 12 months of start date Benefits (For full time or part time positions): Premium pay for eligible employees Career Pathways to Promote Professional Growth and Development Various Medical, Dental, Pet and Vision options Tuition Reimbursement Free Parking Wellness Program Savings Plan Health Savings Account Options Retirement Options with Company Match Paid Time Off and Holiday Pay Community Involvement Opportunities Endeavor Health is a fully integrated healthcare delivery system committed to providing access to quality, vibrant, community-connected care, serving an area of more than 4.2 million residents across six northeast Illinois counties. Our more than 25,000 team members and more than 6,000 physicians aim to deliver transformative patient experiences and expert care close to home across more than 300 ambulatory locations and eight acute care hospitals - Edward (Naperville), Elmhurst, Evanston, Glenbrook (Glenview), Highland Park, Northwest Community (Arlington Heights) Skokie and Swedish (Chicago) - all recognized as Magnet hospitals for nursing excellence. For more information, visit ********************** . When you work for Endeavor Health, you will be part of an organization that encourages its employees to achieve career goals and maximize their professional potential. Please explore our website ( ********************** ) to better understand how Endeavor Health delivers on its mission to "help everyone in our communities be their best". Endeavor Health is committed to working with and providing reasonable accommodation to individuals with disabilities. Please refer to the main career page for more information. Diversity, equity and inclusion is at the core of who we are; being there for our patients and each other with compassion, respect and empathy. We believe that our strength resides in our differences and in connecting our best to provide community-connected healthcare for all. EOE: Race/Color/Sex/Sexual Orientation/ Gender Identity/Religion/National Origin/Disability/Vets, VEVRRA Federal Contractor.

We're seeking an Ammonia Refrigeration Technician who can independently maintain, troubleshoot, and repair industrial ammonia systems across two facilities. Responsibilities: Inspect, test, troubleshoot, and repair ammonia refrigeration systems Monitor/control ammonia levels (Plant 1: 22,000 lbs. | Plant 2: 18,000 lbs.) Perform wastewater checks and documentation Partner with the parts room to source and prepare needed components Conduct PMs on compressors, boilers, AC units, rooftops, and facility equipment Handle basic building maintenance (doors, office heating, etc.) Support contractors (AMS) on major system repairs Maintain: 13 compressors (low & high station across both plants) 6 steam boilers 4 vacuum pumps