Service technician jobs in Waukesha, WI

Our client is on the search for a 1st shift shop or field service technician for an industrial machinery manufacturing and industrial repair facility that troubleshoots, repairs and rebuilds hydraulic systems, pneumatic assemblies, cylinders, and pumps. In-house shop mechanic 1st shift- $22-$30/hour d.o.e (training available) Field Service Repair Tech-$32-$50/hour is possible. *Offers a bonus at 6 months and 1 year totaling $5,000 bonus* Company has in-house mechanics and machinists to work as a team in repairing and refurbish work. Great opportunity-(contract-to-direct) permanent position, good pay, insurance vacation, uniforms, 401k and bonuses. Qualifications Strong written and verbal communication skills Ability to travel Ability to lift up to 75 pounds Valid Drivers License

Employment Type: Direct Hire Be the expert customers rely on to keep critical production equipment running at peak performance-where your skills make a real impact every day. Overview The Field Service Engineer provides hands-on technical service to optimize customer production and ensure peak performance of installed equipment. This role requires a strong on-site presence at customer facilities and close collaboration with internal teams during equipment installation, start-up, and ongoing support. Field Service Engineers are trusted technical resources, delivering maintenance, repairs, and customer training across the United States and Canada. Key Responsibilities Maintenance & Repair Perform routine maintenance, diagnose equipment issues, and repair or replace defective components to ensure reliable operation. Troubleshooting Identify root causes and implement effective solutions for mechanical, electrical, pneumatic, and electronic control system issues. Installation & Start-Up Support Install, configure, and support new equipment and systems in accordance with engineering specifications and project requirements. Customer Support & Training Train customer technicians on proper equipment operation, preventive maintenance, and basic troubleshooting best practices. Documentation Maintain accurate service records, including work performed, parts used, and labor hours. Compliance & Safety Ensure all work is performed in compliance with company policies, safety regulations, and industry standards. Additional Duties Perform other related duties as assigned. Travel Requirements Minimum of 50% travel to customer sites; travel is primarily by automobile, with some domestic and occasional international air travel required. Required Skills & Qualifications Education: Certificate or degree in a technical field (electronics, engineering, or related technology) from a Trade School, Technical School, College, or Military Technical School. Experience: Minimum of 3+ years in a technical role using hand tools and basic electrical test equipment. Self-Motivation: Highly driven, disciplined, and able to work independently while managing deadlines effectively. Work Environment: Comfortable working in an industrial manufacturing or production shop floor environment; flexible to work overtime as needed. Technical Expertise: Strong mechanical and electrical aptitude Ability to read and interpret diagrams, schematics, engineering specifications, and technical manuals Experience with industrial machinery, preferably in food, beverage, or packaging environments Communication: Strong verbal and written communication skills for customer interaction and internal coordination. Problem Solving: Excellent analytical and troubleshooting abilities. Physical Requirements: Ability to perform physical tasks, including lifting equipment occasionally exceeding 50 lbs. Driver's License: Valid driver's license with a clean driving record required. Preferred Experience Previous experience servicing food manufacturing or processing equipment Working knowledge of servo drives, variable frequency drives (VFDs), and/or PLCs Compensation & Benefits Competitive wages with profit-sharing opportunities 15 days of paid time off in the first year Double pay for Sunday work Comprehensive health care package including medical, dental, vision, and disability coverage Supportive, open, and family-like work environment Apply today to join a hands-on, customer-facing engineering role with nationwide exposure and long-term growth opportunities. Equal Opportunity Employer Statement Ascendo is a certified minority-owned staffing firm that welcomes and celebrates diversity. We are an Equal Opportunity Employer and do not discriminate based on race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, retaliation, parental status, military service, or any other non-merit-based factor.

Do you love to travel? Passionate about serving as a brand ambassador? Feel fulfilled by solving technical challenges? Our field service team specializes in keeping our machine performance strong. Our team is dedicated to staying calm while acting quickly, finding solutions, and exceeding customer expectations. We offer rewarding, challenging opportunities throughout the world, across multiple packaging segments. If you are energized by providing best-in-class customer experiences and strive for advanced technical skills, we want to talk to you. Do we have your attention? Keep reading. TechniBlend is looking for a self-starter, ambitious Field Service Technician to deliver world-class technical customer service and support. This person will work directly within the Technical Service Group and manage multiple customers and projects. Service Technicians frequently correspond with customers; maintain oversight on equipment, service machinery, and travel to customer facilities. The goal is to drive service success that improves customer satisfaction, maximizes customer retention and increases profitability. Are you passionate about this work? • Support TechniBlend (OEM) equipment and systems at customer production facilities. • Diagnose and troubleshoot mechanical, electrical and controls technical errors with equipment and determine and execute proper solutions. • Remotely monitor the effectiveness and performance of equipment via remote access software and direct communication with customers. • Conduct testing and commissioning of control systems, ensuring functionality, reliability, and safety. • Perform modifications, upgrades, and routine maintenance to existing equipment to meet customer needs and requirements. • Provide best-in-class service with customers and collaborate professionally fellow technical service and engineering personnel. • Provide training to the customers on equipment operations and maintenance procedures. • Produce timely, accurate and detailed service reports. • Comprehend customer requirements and make appropriate recommendations and modifications as required. • Manage field service appointments and customer troubleshooting requests through Salesforce - Field Service Lightning. • Ability to manage travel and expenses through expense management software while following company policies. What's in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. Total compensation includes your salary, comprehensive medical/dental programs, as well as life insurance, a generous paid time off program, and a retirement savings plan with a company match. And because we understand the importance of feeling protected, there is no waiting period for benefits - you are eligible on your first day of employment! If this sounds like you, we want to connect! • Proven field service and technical service experience and aptitude • Ability to troubleshoot, test, repair and service technical equipment • Ability to work flexible shifts and adapt to changing work schedules • Willingness to travel up to 70% of the time (primarily domestic / USA) • Ability to work extended hours and weekends • Able to effectively organize, schedule, and carry out work assignments with minimal supervision • Read and interpret technical manuals, blueprints, diagrams • Understanding of the safe operation of hand tools and power equipment • Effective communication skills, verbal as well as written • Well-developed skills in problem solving and troubleshooting • Broad technical knowledge of process and/or industrial automation • Mechanical aptitude and ability to perform mechanical and physical tasks • Ability to support customers during and after hours on a scheduled basis ADDITIONAL SKILLS: • Brewing, Food & Beverage processing equipment experience a plus • Ambitious, fun & flexible • Organized, with strong time management skills and a strong work ethic • Technical curiosity is critical • High attention to detail EDUCATION AND EXPERIENCE: • Requesting (not required) 3 to 5 years of experience in installation, industrial maintenance, and troubleshooting of processing systems preferred. • Associates or technical degree in engineering or related field required. - Prefer higher level education in engineering, electronics, programming, etc. • Proficient knowledge of mechanical, electrical and process systems used in the brewing, food & beverage production industry. • Experience with various control systems and PLCs (Programmable Logic Controllers), especially Rockwell Automation / Allen-Bradley systems. • Experience with mechanical process equipment such as pumps, valves, meters and other components. • Computer knowledge: Microsoft Office, Excel and Word, Salesforce, Syteline Pro Mach, Inc. was named to the Inc. 5,000 list of the fastest growing private companies in the U.S. seven times. We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities. We have the rewards, opportunities, and the market strength of a large organization combined with the entrepreneurial culture of a small, fast-paced company. You will enjoy the benefits of working with a growing company that competes globally with the personal touch and feel of a smaller company where you can make an impact every day. Curious about life at ProMach? Follow us on LinkedIn, Twitter, and Instagram! ProMach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. #TEC #INTEC

Industrial Maintenance Technician Schedule: Night Shift | 5:30 PM - 6:00 AM | 2-3-3 Schedule Salary: $72,000 - $82,000 per year Reporting to the Maintenance Manager, the Maintenance Technician is responsible for performing a variety of maintenance activities on plant equipment, machinery, buildings, and facilities. Key Responsibilities: Complete repairs to minimize downtime, reduce parts/labor usage, and proactively address issues. Assist with all maintenance operations, including machinery, HVAC systems, and boiler operations. Read and interpret mechanical drawings, blueprints, and charts. Conduct continuous assessments of facility operations, machinery, and supporting systems. Collaborate with Production Managers, Supervisors, and QA to resolve maintenance issues. Follow the Preventive Maintenance program and maintain accurate maintenance logs. Provide 24/7 coverage for emergencies, including equipment repair and resource mobilization. Ensure all tools and equipment are secured and prepared prior to equipment startup. Qualifications: High school diploma required; additional education preferred. 5+ years of progressive plant maintenance experience, preferably in food manufacturing. Willingness and ability to work extra hours to support production needs. Ability to stand/walk up to 100% of the shift, work in cold environments, and lift 10-50 lbs. Strong written and verbal communication skills; Spanish proficiency a plus. Ability to apply basic mathematics to solve maintenance problems. Work Environment: Operates in a production plant and warehouse with varying temperatures. Requires standing, walking, bending, kneeling, stooping, crouching, crawling, climbing, and lifting up to 50 lbs. Regular communication with team members and supervisors. Other Duties: This job description is not exhaustive and may be subject to change. Employees may be asked to perform other duties as necessary. To be considered for this opportunity, please reach out to Trova Advisory Group by sending an email to ********************** with your resume, the position you are applying for, and a brief introduction. When contacting us, please ask for the hiring team to ensure your application is directed to the right person. We look forward to hearing from you! About Trova Advisory Group Trova Advisory Group specializes in delivering a comprehensive array of staffing solutions tailored to meet the diverse needs of businesses across various sectors. Our expertise spans clerical, administrative, financial, and professional roles, offered through flexible arrangements including temporary placements, temp-to-hire options, and direct hire services. With a keen understanding of the dynamic demands of today's workforce landscape, we pride ourselves on providing top-tier talent solutions that empower organizations to thrive and succeed in a competitive market environment. Trova Advisory Group is proud to be an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, disability status, protected veteran status, or any other legally protected characteristic or group status. We are committed to creating a culturally diverse and inclusive workplace where individuals of all abilities are welcomed and supported. If you require a reasonable accommodation during the application or interview process, please contact us at *****************. Include the nature of your request and your contact information, and we will be happy to assist you. Trova Advisory Group offers a comprehensive benefits package offering Medical, and Dental benefit options to all eligible employees.

We are Toshiba. We have an unwavering drive to make and do things that lead to a better world. At Toshiba, we commit to raising quality of life for people around the world, ensuring progress that is in harmony with our planet. Our core values include: Do the Right Thing, Look for a better way, Always consider the impact and Create Together. Toshiba America Energy Systems Corporation (TAES) provides energy industry solutions - new equipment, retrofits, maintenance, outage planning and more - for current and future power generation needs in the Americas, including thermal, hydro and nuclear power plants. Position Summary We are seeking a Field Service Repair Technician to work out of our Milwaukee Service Center. The FS Repair Technician involves troubleshooting and repairing turbines, stators, and rotors in generators at customer locations. The candidate will learn to operate test equipment, diagnose issues, and determine necessary repairs. Responsibilities include assisting in testing components, using precision measuring instruments, and working under close supervision with inspections. The role also involves coordinating field service tooling and maintaining a professional image at job sites. The candidate should have a strong desire to advance to the Generator Technician position. Essential Duties Help to construct and operate testing equipment to identify problems and determine necessary field service. Assist with paperwork, including test data, daily logs, job information, timesheets, and final reports. Learn procedures for rewinding, re-wedging, re-blocking, rebuilding stator bars/coils or cores, and repairing turbines and related components. Gain knowledge in winding insulation, curing, cooling stator bars/coils, and blocking bars/coils. Build and assemble slot wedges into stator core grooves. Acquire skills in stator core construction methods, including flooding, end winding, side bar packing, top and bottom filler, and resistance temperature detectors. Work with various resins and solvents. Become proficient with various hand and power tools. Learn to operate a portable milling machine and wire welding procedures. Help inventory and ensure supplies and equipment are in good working order before and after job site visits. Operate overhead cranes and lift trucks properly. Maintain a simplified tooling process by ensuring all responsible parties for a field project are aware of all tools sent out. Prepare purchase requisitions for tooling, materials, and chemicals, coordinating with various suppliers. Customize tooling designs or fabrication with various departments. Coordinate shipping and receiving of field service tooling to job sites. Inspect tools, including calibration and restocking, and follow procedures for testing electrical equipment. Coordinate the calibration of tooling and fabricate or modify as needed. Develop a mindset for service and courtesy. Perform other tasks requiring similar or lesser skills, usually of short duration to meet field service requirements. Travel Up to 90% Education and Required Experience High School Diploma or Equivalent. Trade or Technical Degree in a related field preferred. 1-3 years of experience with working knowledge of shop practices and basic electrical and mechanical fundamentals, gained through vocational training. Minimum 3 years previous experience in a similar or related role or 1-3 years' experience in power generation field service, in lieu of vocational training. Cooperative work crew skills, as work is performed at field locations. Proficient in basic arithmetic operations, including decimals and fractions, and able to use formulas, blueprints, specifications, and tables. Skilled in using various precision measuring instruments. Familiarity with hand tools. Capable of operating overhead cranes and fork trucks. Proficient in Microsoft Office (Word, Excel, Outlook) and able to learn new software programs, such as Oracle for purchase requisitions. Previous experience in millwright, carpentry, welding, electrical, or HVAC roles preferred. Knowledgeable in Asbestos abatement and lead awareness training preferred. Possess a valid driver's license for travel to customer sites. Must be able to pass requirements to gain unescorted access to a nuclear facility. Must be able to work without restriction throughout U.S, Canada, and Mexico. Physical Requirements (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.) The employee must be able to lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include Close vision, Distance vision and Ability to adjust focus. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to finger, handle, or feel. The employee frequently is required to talk or hear. The employee is occasionally required to sit; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and taste or smell. Work Environment While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts, fumes, or airborne particles, and toxic or caustic chemicals. The employee is occasionally exposed to work in high, precarious places, and risk of shock. The employee is occasionally exposed to extreme heat, extreme cold and wet, humid conditions. The noise level in the work environment is frequently loud. Additional Info Toshiba employees enjoy a comprehensive compensation and benefit package including an annual bonus, a generous 401k match, health, and wellness programs as well as generous t ime off. Toshiba is an Equal Opportunity Employer.

Dürr CTS (Clean Technology Systems) develops advanced environmental technologies to make industrial production cleaner, safer, and more efficient. Across all our product lines, Dürr CTS offers responsive, local, and skilled service teams, delivering customer-focused support in maintenance, troubleshooting, spare parts, and plant modifications. Since November 1st, 2025, Dürr CTS has operated independently, with 1,300 employees across 12 countries. We provide reliable and innovative environmental technology solutions, helping customers worldwide meet their regulatory and sustainability goals. Our Portfolio Includes: Air Pollution Control: thermal oxidation, sorptive processes, particulate matter separation Noise Abatement: Silencer products, filtration, gas turbine inlet and exhaust systems by Dürr Universal Decentral Power Generation: Organic Rankine Cycle systems with Cyplan ORC We serve a wide range of industries, including chemical, pharmaceutical, food, automotive, energy, surface coating, and many more, providing tailored solutions that help customers meet environmental regulations, reduce emissions, ensure operational reliability, and improve sustainability. We're Looking for People Who: Can be the face of our company to our customers Love to travel and experience new work environments Enjoy navigating challenges that require you to think on your feet Have a high mechanical aptitude Crave personal development and improvement What We Do: Durr Universal provides noise and environmental solutions to our customers. For more than 65 years, we have supported our customers through our design, manufacturing, and installation of acoustic and emissions systems. We work to continually improve our knowledge of our equipment, our customers' processes, and how the two interact. Why We're in Business: Durr Universal provides value-added solutions to our customers. We pride ourselves on the thoroughness of our pre-sale consultation and solution development, the quality and longevity of our equipment, and our best-in-class service from initial customer inquiry through the life of the equipment. We seek long-term partnerships with customers that value our approach. This position will oversee all activities of both Durr Universal internal and Field Service contractors and report on the performance of the department functions with appropriate personnel in the company. This position will require working with the Field Service Technicians, Project Managers, Sales, Engineering, 3rd party Contractors, and site customers to ensure overall contract requirements are successfully met for field service work, warranty repair, quality inspection, and technical supervision. This position requires travel from 70% to 90% to various potential customer sites to assist in quoting, supervision, auditing, inspection, etc. of dedicated Field Service Teams, along with assisting and overseeing field service project work scopes and related scopes. The Field Service Supervisor/TFA must plan, organize, direct, and manage the work of individual field service technicians and contractors in various field operations. Essential Functions: Put safety first in everything you do and help ensure our colleagues, customers, and business partners remain safe at all times. Be the liaison between the customer, contractor, and Dürr staff Assist in the installation of Dürr and other equipment Manage all 3rd party subcontractors, ensure work is done safely, properly, and on time and in budget. Work with site personnel and internal personnel on project issues and resolve them effectively. Develop cost estimates and customer proposals for field installation projects. Creation and deployment of mobilization schedules for the field service department. Assist in equipment commissioning and documentation as required Participate in contract reviews and kick-off meetings involving the field service scope of work. Assist with parts procurement as needed When required provide customer training on installed equipment Provide equipment modular build support as required Experience and Skills: Must make safety a priority every day AWS Certified Welding Inspector (CWI) is a plus Painting and coatings certification/ experience is a plus OSHA 10 or 30 Hour Safety Trained Familiar with MS Word, Excel, and PowerPoint Desire to travel Ability to read and interpret engineering drawings and technical documents (i.e. layout, sectional drawings) Excellent written and verbal communication skills Desire to work hands-on in an industrial environment Proven mechanical aptitude - including the use of various machining tools, welding equipment and methods, and various testing equipment Demonstrated experience with installation and inspection of large steel structures (ducting and tall stacks, steel platforms) and their welding processes, inspection of welds, and industrial coatings Working experience with safe lifting & rigging methods Fully capable with Microsoft Office software package Flexible to adapt to same-day and next-day changes Ideal candidate will have experience developing RFQ/RFPs for work that would be subcontracted to 3rd party vendors. Experience with steel fabrication and custom equipment manufacturing. Position can be located anywhere near a major airport Dürr CTS, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. We maintain a drug-free workplace and perform pre-employment drug and alcohol testing. Note to all Staffing Agencies: Dürr CTS, Inc. has a team of dedicated Human Resources professionals who are responsible for all hiring needs. Our practice is to partner and work with our approved vendors on an as-needed basis. We do not accept resumes from agencies that are not on our preferred vendor list and have not signed our Recruiting and Permanent Placement Contract. Any resumes submitted from unapproved vendors will be considered unsolicited, and Dürr will not be obligated to pay a referral fee.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Milwaukee, WI Job Type: Full Time Shift Available: 1st Compensation: $37.23/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Performs work assigned by supervisor Identify follow-up work and parts required Assist in development and implementation of new systems Complete, Sign and return Work Order to Maintenance Supervisor complete with; Work Description, Symptoms, As Found, As Left, Start / Finish time, and Labor Hours and Note Deficiencies, Delays, any Job Plan Feedback Help promote and communicate Maintenance and Reliability to the Organization Other duties include housekeeping, safety training, and meetings Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 2 years industrial maintenance experience Excellent communication skills (English written, verbal, listening) Ensure compliance with all local codes, regulations Preferred Qualifications Associate degree in Electronic Engineering or significant experience in PLC and control system troubleshooting High School Diploma or equivalent Troubleshoot limit switches, photo eye and proximity switches Proficient in reading ladder diagrams and be able to troubleshoot PLC machines without the aid of a computer Trouble shoot, repair and replace faulty electrical components through the use of hand tools and electrical test equipment Measure, cut and bend conduit such as rigid EMT, PVC, and IMC utilizing hand tools and benders Be able to Set up and troubleshoot drives, showing understanding and ability to change settings Troubleshoot PLC on line Understand the Hydraulic, pneumatic and vacuum system concepts Experience with Microsoft Office Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Maintenance Technician - $25-$36/hr DOE! is a direct hire opportunity! Integrity Trade Services is hiring a Maintenance Technician for our foundry client to start immediately at $25-$36/hr DOE! Receive comprehensive benefits through our client upon hire! Responsibilities: Under general direction, performs entry- to mid-level diagnosis, troubleshooting, repair, and preventative maintenance in compliance with diagrams, schematics, manufacturer guidelines, and management requirements on both mechanical and electrical foundry equipment. Supports facility maintenance tasks at a basic level, which may include building upkeep, grounds maintenance, lighting, plumbing, HVAC, and related systems. Work is typically carried out under the guidance of a senior technician or supervisor. Carries out both self-directed and assigned maintenance activities, including troubleshooting equipment to identify root causes of malfunction; disassembling machinery to remove and replace defective parts; inspecting worn components for defects; making adjustments to equipment controls and functions; testing components, circuits, and systems for proper performance; and restoring machinery to operational condition. Performs minor fabrication including welding. Orders materials and replacement parts as needed. Troubleshoots and analyzes equipment failures. Collaborates with the plant engineer as a proactive maintenance resource. Installs wiring, assembles, and repairs electrical panels or equipment in compliance with NFPA/NEC standards. Performs general facility upkeep, which may include tasks in electrical, mechanical, carpentry, and HVAC disciplines to maintain building interiors, exteriors, and grounds. Provides support to machine operators and production staff to ensure reliable equipment performance and production efficiency. May set up and operate multiple machining processes such as lathes, drill presses, grinders, welding power units, and other metalworking tools to fabricate or repair parts and equipment. Location: Pewaukee, WI Schedule/Shift Details: 3rd shift: 8PM-6:15AM Monday-Thursday Must be able to train on 1st shift. Overtime on Friday nights as needed. Qualifications: High School, GED or equivalent education with 5+ year's maintenance experience or Technical Degree in maintenance related field Experience in foundry environment most desired. Otherwise, heavy industrial experience preferred. Ability to read and interpret documents such as installation manuals, operating instructions, and procedure manuals written in English. Demonstrated ability to work safely by observing policies and procedures in an industrial environment Hands-on experience troubleshooting, maintaining, and repairing pneumatic, hydraulic, electrical, and mechanical systems in manufacturing settings Skilled in preventative and corrective maintenance within a fast-paced production environment Proficiency in reading and interpreting electrical schematics, hydraulic and piping diagrams Metal fabrication abilities including MIG/TIG welding, arc gouging, and cutting methods Capability to research and interpret parts, prints, schematics, and technical documentation PLC troubleshooting skills with programming familiarity Strong communication skills Background in facility repair and maintenance such as HVAC, welding, cutting, and pipe fitting Experience using Computerized Maintenance Management Systems (CMMS) Skilled in precision measurement tools such as calipers, micrometers, multimeters, and indicators Proficient in the use of shop equipment: drill presses, sanders, grinders, mills, lathes, welding machines, cranes, and forklifts Knowledge of industrial air compressor systems and distribution networks Computer literacy with Microsoft Office (Word, Excel, Outlook) Valid driver's license Benefits: Medical, Dental, Vision 401K Profit sharing Company paid life insurance Free uniforms after 6 months

1st shift hours: 5:30 a.m. to 2:30 p.m. Monday through Thursday and 5:30 a.m. to 11:30 a.m. on Friday The Maintenance Technician is responsible for performing a wide range of maintenance duties to ensure the safe and efficient operation of building systems, production equipment, and facility grounds. This individual must have a strong mechanical aptitude and a desire to develop skills in machine operation and maintenance. This role also supports company events, safety programs, and compliance initiatives Essential Duties and Responsibilities: Perform routine and emergency maintenance and repairs on machinery, forklifts, hand tools, air compressors, dryers, foaming machines, molding equipment, lighting, HVAC systems, and other production support systems Serve as on-call support for facility or equipment issues during off-hours Execute and maintain the preventative maintenance (PM) program, ensuring timely completion of all scheduled tasks Conduct and document safety inspections (e.g., fire extinguishers, exit signs, sprinklers), initiating repairs as needed Actively participate as a key member of the Safety Committee Coordinate logistics and setup for trade show displays, including door stands, site setup/teardown, trucking, rigging, and carpentry Manage hazardous waste disposal processes in compliance with regulations Support compliance and regulatory program coordination (e.g., OSHA, environmental, safety audits) Assist with office-related maintenance tasks and special requests Coordinate company meetings and events, including room setup and refreshments Perform seasonal and routine exterior groundskeeping duties Work collaboratively with engineers on new prototype doors, including manufacturing parts, developing tools, fixtures, and templates Support facility security, including after-hours call-ins and coordination with the security provider. Provide assistance in manufacturing as needed (assembly, machining, welding). Desired Competencies: Quality of Work: Delivers high-quality results, demonstrates attention to detail, and seeks continuous improvement Efficiency & Productivity: Works efficiently, meets deadlines, and increases output without sacrificing quality Technical Knowledge: Demonstrates a growing understanding of maintenance and machine operation principles Team Collaboration: Works well with others, accepts direction, and supports team success. Dependability: Consistently reliable and punctual; prepared to work at the start of each shift Safety & Cleanliness: Maintains a clean, safe, and organized work environment; follows all safety protocols. Qualifications: High school diploma or GED required. Associate's degree or technical school training in maintenance, electrical, HVAC, or related field preferred Minimum 2 years of hands-on maintenance and equipment repair experience required. Desire to learn and grow into machine operation and equipment-specific maintenance responsibilities Technical Skills: · Proficient with basic MIG welding, plumbing, and electrical repairs. Experience with plasma and oxy-acetylene cutting is a plus Ability to read blueprints, schematics, and assembly drawings Familiarity with power tools, hand tools, measuring instruments (micrometers, calipers), and electrical testing devices Computer Skills: · Basic proficiency in Microsoft Office, including Excel and Outlook, is helpful Ability to complete electronic PM tracking and safety documentation Certifications & Licenses: · Forklift certification and scissor lift experience required OSHA 10/30-hour training preferred Valid driver's license required Qualifications Proven experience in facilities maintenance within manufacturing environments or similar settings. Strong mechanical knowledge with the ability to read schematics and technical manuals. Experience working with Programmable Logic Controllers (PLCs) and electrical systems. Skilled in welding techniques and residential painting for facility projects. Familiarity with CMMS software for maintenance tracking and reporting. Ability to use diagnostic tools such as Ohmmeters effectively. Supervising or leadership experience is preferred to guide team members during complex tasks. Excellent communication skills in English to coordinate with team members and vendors effectively. Knowledge of manufacturing processes, safety standards, and customer service principles is essential. This Maintenance Technician position offers an engaging opportunity for a dedicated professional eager to contribute technical expertise in a dynamic environment while supporting operational excellence across our facilities. Pay: $43.00/hour

A02 Print, Mail & Scan Production Associate Employment Type: Full-Time Level: A02 The A02 Print, Mail & Scan Production Associate provides onsite print room services to client staff, supporting daily print, copy, scan, and mail operations. This role ensures reliable service delivery, device uptime, accurate job tracking, and a high level of customer satisfaction while meeting service level agreements. Primary Responsibilities Print, Copy & Scan Services Deliver onsite print room services using Xerox production devices and finishing equipment, including binding, folding, and guillotining. Execute document processing services such as hybrid mail and inbound and outbound scanning. Support ad hoc services including print procurement and special requests. Device Operations & Maintenance Operate and maintain print room and fleet devices. Perform first-level break-fix support, including clearing paper jams, replacing consumables, and troubleshooting print issues. Ensure devices remain operational to meet contractual service requirements. Job Tracking & Reporting Track all print, scan, and mail jobs through completion for reporting and audit purposes. Ensure accuracy of job submissions, tracking details, and completion records. Support customer satisfaction and management reporting. Stock & Supplies Management Maintain full stock control of paper, consumables, folders, and stationery. Conduct stock takes and manage storage. Place supply orders in coordination with the team to ensure SLA compliance. Client & Stakeholder Support Serve as the first point of contact for print room job submissions. Confirm job requirements, timelines, and expectations with customers. Communicate job completion and manage changes to scope or delivery as needed. Build and maintain strong working relationships with client contacts. Identify risks and opportunities and escalate to the appropriate account leadership. Account & Service Development Support account growth by identifying opportunities for additional or expanded services. Assist with the introduction of value-added offerings such as external print procurement. Qualifications & Experience Experience in a customer-facing role. Proven ability to manage multiple tasks under pressure. Strong customer service mindset with a solutions-oriented approach. Ability to work independently while contributing to a team environment. Excellent verbal and written communication skills. Health and safety awareness and compliance. Basic computer proficiency, including Microsoft Word, Excel, PowerPoint, Outlook, and Adobe Acrobat. Physical & Work Requirements Ability to be on your feet up to 80 percent of the workday. Ability to lift and move up to 50 pounds. Ability to adapt to changing priorities and operational demands. Strong problem-solving skills using a logical and systematic approach. What Success Looks Like Consistent delivery of accurate, on-time print and mail services. High customer satisfaction and clear communication. Well-maintained equipment and organized inventory. Reliable job tracking and reporting. Proactive identification of service improvements and growth opportunities.

I am looking to hire a full-time Machine Maintenance (3rd Shift) for a manufacturing company here in Mukwonago, WI (53149). This role will be a permanent position and is looking to interview/start immediately! Schedule: 2-2-3, 6:30pm - 6:30am Pay: $25-28/hr (Based on experience) + Bonus Benefits: Health, Vision, Dental, 401k, PTO, Holidays, maternity/paternity leave, life insurance, LTD, STD, Job Responsibilities: Responsible for learning and performing preventative maintenance on all injection molding machines/auxiliary machines Install, maintain, modify wide variety of machinery and auxiliary production Diagnose and remedy operating problems Assist machine maintenance in correcting machine operating problems Fitting and aligning precision mechanisms, drives, bearings Routine repair projects Must Have: Machine maintenance and process equipment Injection Molding experience Familiarity with supporting systems including hydraulics, heat, electrical controls

Maintenance Technician 2 IDR is seeking a Maintenance Technician 2 for one of our top clients in Pleasant Prairie, Wisconsin. If you are looking for an opportunity to join a large organization and work within an ever-growing team-oriented culture, please apply today! Responsibilities of the Maintenance Technician 2: Troubleshoot a variety of multi-craft equipment. Test electrical systems and continuation of circuits for wiring. Install, replace, and/or repair electrical wiring, switch boxes, conduits, light fixtures, etc. Ensure machines are lubricated properly to maintain functionality Assist in training and mentoring junior technicians as needed. Required Skills for the Maintenance Technician 2: 5+ years of professional experience in industrial manufacturing. Strong electrical/mechanical background. Strong ability to interpret OEM manuals, drawings, and schematics. Ability to read and interpret precision measuring devices. Familiar and comfortable with shop equipment like power tools, band saw, and drill presses. What's in it for you? Competitive compensation package Full Benefits; Medical, Vision, Dental, and more! Opportunity to get in with an industry leading organization Close-knit and team-oriented culture Why IDR? 25+ Years of Proven Industry Experience in 4 major markets ClearlyRated's Best of Staffing Client and Talent Award winner 11 years in a row

About the Role: The Industrial Maintenance Technician is responsible for maintaining facility equipment and ensuring the operational reliability of mechanical, electrical, and water systems throughout the plant. This role requires strong troubleshooting skills, the ability to respond quickly to equipment breakdowns, and a commitment to high safety and housekeeping standards. The technician will perform routine preventative maintenance, diagnose mechanical and electrical issues, and support continuous plant operations. Key Responsibilities: Perform basic mechanical and electrical maintenance tasks as required. Respond promptly to emergency breakdowns and equipment repair needs. Conduct shift rounds at least twice per shift to inspect compressors, chillers, pumps, extrusion equipment, material transfer systems, and other critical systems. Identify and report equipment problems, leaks, or deficiencies; take corrective action as necessary. Execute preventative maintenance tasks including lubrication, filter changes, oil changes, motor/pump replacements, plumbing repairs, and cleaning. Assess equipment condition-filters, hydraulics, motors, compressors, pumps, plumbing, and electrical systems-and determine appropriate response. Utilize SAP to generate work orders, track labor, and record material usage. Complete routine assignments independently with minimal supervision. Maintain housekeeping standards in all assigned work areas. Perform additional duties as assigned. Qualifications: High school diploma or equivalent. Minimum of 2 years experience in extrusion operations or 3+ years in industrial maintenance. Basic knowledge of facility layouts including compressed air systems, chilled water, recycled and city water systems, electrical distribution, bus bars, and primary breakers. Basic electrical and mechanical troubleshooting ability. Basic welding, fabricating, and equipment repair skills. Adequate computer skills to operate SAP or similar maintenance systems. Strong adherence to safety protocols. EEO Policy: Allied Resources complies with all Equal Employment Opportunity (EEO) affirmative action laws and regulations. Allied Resources does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender identity and expression, disability, veteran status, or other status protected by law.

The Maintenance Technician will ensure the smooth operation of a state-of-the-art baking facility by maintaining and repairing high-speed production and packaging equipment. This role involves troubleshooting mechanical, electrical, and automation systems to minimize downtime while adhering to OSHA and company safety standards. The technician will also contribute to continuous improvement initiatives, including TPM practices, root cause analysis, and efficiency optimization. Collaboration with cross-functional teams and documentation of maintenance activities in CMMS are essential aspects of this position. Job Requirements: Perform predictive, preventive, and corrective maintenance on production equipment. Troubleshoot and repair mechanical, electrical, and robotic systems to ensure operational efficiency. Utilize CMMS for tracking work orders, preventive maintenance, and performance metrics. Job Qualifications: Minimum 2+ years of hands-on maintenance experience in manufacturing, preferably in high-speed food production or packaging. Expertise in troubleshooting and repairing electrical, mechanical, and automated systems, including PLCs and robotics. Technical certification or associate degree in industrial maintenance, electrical engineering, or a related field preferred.

Job Description: This is your chance to make your mark. Introducing our customers to the world's most robust network all while delivering best-in-class service. You're the key to elevating the customer experience, providing seamless installation and activation of our state-of-the-art technology. And you'll get the satisfaction of helping others and connecting our customers to what matters most to them every day. connectourcustomers Our Installation Technicians earn between $20.41 and $33.90 hourly. With our amazing wage opportunities, our average starting earnings begin at $42,458 per year. Individual starting salary within this range may depend on geography, experience, expertise, and education/training. Joining our team comes with amazing perks and benefits: Medical/Dental/Vision coverage 401(k) plan Tuition reimbursement program Paid Time off and holidays (With some exceptions bargained employees qualify for one week of PTO after 6 months of service and 2 weeks after the first year). At least 6 company designated holidays and additional PTO (based on bargaining group to which you are hired. Sick leave Paid Parental Leave Adoption Reimbursement Disability Benefits (short term and long term) Life and Accidental Death Insurance Supplemental benefit programs: critical illness, accident hospital indemnity/group legal Employee Assistance Programs (EAP) Employee discounts up to 50% off on eligible AT&T mobility plans and accessories, AT&T internet (and fiber where available) and AT&T phone What's a typical day like? You'll work independently at our customer's homes and businesses as a trusted expert, installing the latest technology for high-speed broadband, Wi-Fi, and voice services. You'll have the opportunity to meet new people every day while solving problems and being rewarded for doing great work. Whether you're putting in a new line, climbing a ladder or simply plugging in and activating a wifi network, one thing is true, no two days will be the same. Want to be considered? You'll need to: Work a flexible schedule, including evenings and weekends. Possess a valid state driver's license. Lift and move up-to 60 lbs - some of our ladders weigh 50-60 lbs Weigh less than 325 lbs., required for ladder safety. At times work in small spaces or aloft (up to 28 ft.) Be available for overtime, emergency callouts and holiday work. Identify wire and cable colors. Qualify on pre-employment assessments. Have a High School Diploma or GED Interested? We provide extensive training and the resources you need in a collaborative and dynamic team environment, built for your success. You'll have the opportunity to continue to learn and grow with ongoing paid training, leading you to exciting career paths. If you are considering jobs like Maintenance Technician, Cable Installation Technician, Fiber Technician, Facility Technician or Telecommunications Technician, this career move would be a great fit! Ready to take your career on the road to success? Apply today! Weekly Hours: 40 Time Type: Regular Location: Buffalo Grove, Illinois It is the policy of AT&T to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, AT&T will provide reasonable accommodations for qualified individuals with disabilities. AT&T is a fair chance employer and does not initiate a background check until an offer is made. d24ad0b8-823f-4e68-a892-2986ccdf7392

Our large financial/banking client is currently seeking a Datacenter Technician This is a contract to hire role that must be done onsite on in the southwest Racine area W2 only, no C2C or third parties. This job will have the following responsibilities: Coordinate with Data Center and Field Site teams, Facilities, and contractors to successfully execute structured cabling builds Work with design team to develop timely project specific specification and scope documentation, including floor plans, pathway and rack layouts, rack elevations, cable schedules, and bill of materials for all ISP and OSP cabling Coordinate infrastructure technologies (AV, Network, Voice, IP security systems) for Enterprise Facilities driven projects Collaborate with internal stakeholders to deliver designs, meeting capacity and network requirements and go-live timelines Qualifications & Requirements: Experience designing, deploying and maintaining complex data center environments (new facility, major facility renovations/expansions) Understanding of indoor/outdoor cable plants, including copper cabling, long range/short range fiber optic cabling Knowledge of information technology infrastructure components (LAN/WAN/SAN, firewalls, Wintel/Lintel/UNIX servers, storage, roll-on equipment, wireless, DAS) Data center and/or networking industry certifications preferred

Provide maintenance support to the manufacturing floor, including repair and upkeep of presses, auxiliary equipment, and building/grounds. Utilize preventive maintenance programs and work orders to support safe, efficient operations and continuous improvement. Key Responsibilities Complete assigned preventive maintenance and work orders Maintain maintenance inventory and work areas in an orderly manner Perform building and grounds maintenance as directed Report unsafe conditions or equipment issues to supervision Follow quality, safety, and environmental policies and procedures Support compliance with applicable safety and operational standards Carry out reasonable requests from supervision Qualifications High school diploma or GED required Completion of required technical training or journeyman program Ability to work well in a team-oriented environment Work Environment & Physical Requirements Manufacturing / plastic injection molding environment Exposure to noise and temperature variations Ability to stand and walk for extended periods Ability to lift up to 50 lbs occasionally Must be able to safely operate a forklift

Dürr CTS (Clean Technology Systems) develops advanced environmental technologies to make industrial production cleaner, safer, and more efficient. Across all our product lines, Dürr CTS offers responsive, local, and skilled service teams, delivering customer-focused support in maintenance, troubleshooting, spare parts, and plant modifications. Since November 1st, 2025, Dürr CTS has operated independently, with 1,300 employees across 12 countries. We provide reliable and innovative environmental technology solutions, helping customers worldwide meet their regulatory and sustainability goals. Our Portfolio Includes: Air Pollution Control: thermal oxidation, sorptive processes, particulate matter separation Noise Abatement: Silencer products, filtration, gas turbine inlet and exhaust systems by Dürr Universal Decentral Power Generation: Organic Rankine Cycle systems with Cyplan ORC We serve a wide range of industries, including chemical, pharmaceutical, food, automotive, energy, surface coating, and many more, providing tailored solutions that help customers meet environmental regulations, reduce emissions, ensure operational reliability, and improve sustainability. We're Looking for People Who: Can be the face of our company to our customers Love to travel and experience new work environments Enjoy navigating challenges that require you to think on your feet Have a high mechanical aptitude Crave personal development and improvement What We Do: Durr Universal provides noise and environmental solutions to our customers. For more than 65 years, we have supported our customers through our design, manufacturing, and installation of acoustic and emissions systems. We work to continually improve our knowledge of our equipment, our customers' processes, and how the two interact. Why We're in Business: Durr Universal provides value-added solutions to our customers. We pride ourselves on the thoroughness of our pre-sale consultation and solution development, the quality and longevity of our equipment, and our best-in-class service from initial customer inquiry through the life of the equipment. We seek long-term partnerships with customers that value our approach. This position will oversee all activities of both Durr Universal internal and Field Service contractors and report on the performance of the department functions with appropriate personnel in the company. This position will require working with the Field Service Technicians, Project Managers, Sales, Engineering, 3rd party Contractors, and site customers to ensure overall contract requirements are successfully met for field service work, warranty repair, quality inspection, and technical supervision. This position requires travel from 70% to 90% to various potential customer sites to assist in quoting, supervision, auditing, inspection, etc. of dedicated Field Service Teams, along with assisting and overseeing field service project work scopes and related scopes. The Field Service Supervisor/TFA must plan, organize, direct, and manage the work of individual field service technicians and contractors in various field operations. Essential Functions: Put safety first in everything you do and help ensure our colleagues, customers, and business partners remain safe at all times. Be the liaison between the customer, contractor, and Dürr staff Assist in the installation of Dürr and other equipment Manage all 3rd party subcontractors, ensure work is done safely, properly, and on time and in budget. Work with site personnel and internal personnel on project issues and resolve them effectively. Develop cost estimates and customer proposals for field installation projects. Creation and deployment of mobilization schedules for the field service department. Assist in equipment commissioning and documentation as required Participate in contract reviews and kick-off meetings involving the field service scope of work. Assist with parts procurement as needed When required provide customer training on installed equipment Provide equipment modular build support as required Experience and Skills: Must make safety a priority every day AWS Certified Welding Inspector (CWI) is a plus Painting and coatings certification/ experience is a plus OSHA 10 or 30 Hour Safety Trained Familiar with MS Word, Excel, and PowerPoint Desire to travel Ability to read and interpret engineering drawings and technical documents (i.e. layout, sectional drawings) Excellent written and verbal communication skills Desire to work hands-on in an industrial environment Proven mechanical aptitude - including the use of various machining tools, welding equipment and methods, and various testing equipment Demonstrated experience with installation and inspection of large steel structures (ducting and tall stacks, steel platforms) and their welding processes, inspection of welds, and industrial coatings Working experience with safe lifting & rigging methods Fully capable with Microsoft Office software package Flexible to adapt to same-day and next-day changes Ideal candidate will have experience developing RFQ/RFPs for work that would be subcontracted to 3rd party vendors. Experience with steel fabrication and custom equipment manufacturing. Position can be located anywhere near a major airport Dürr CTS, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. We maintain a drug-free workplace and perform pre-employment drug and alcohol testing. Note to all Staffing Agencies: Dürr CTS, Inc. has a team of dedicated Human Resources professionals who are responsible for all hiring needs. Our practice is to partner and work with our approved vendors on an as-needed basis. We do not accept resumes from agencies that are not on our preferred vendor list and have not signed our Recruiting and Permanent Placement Contract. Any resumes submitted from unapproved vendors will be considered unsolicited, and Dürr will not be obligated to pay a referral fee.

Onsite Contract W2 only In this role you will be working in a team environment to help build out new and existing datacenters on a project basis. The right candidate will have at least a year of experience working in a datacenter and be familiar with various types of hardware and network devices. You will be responsible for cable labeling, installation/patching and management. This position offers the chance to work for one of the most elite names in the Technology space with the potential for a full-time opportunity. The following experience will ensure you are a good match: 1+ year working in a Datacenter Experience labeling, managing and cabling network devices Abily to work on your own with Management direction