Service technician jobs in West Valley City, UT - 1,336 jobs

Job title: Field Service Technician - HAC Reports to: Field Service Manager Provides maintenance and technical support for Sullair products at customer field locations. Considered an expert on all Sullair rotary products and accessories. Must have broad knowledge and experience on competitive rotary products. Installs new products or enhances existing ones; may provide training and best practices for on-site customer personnel. Identifies and troubleshoots all possible malfunctions and conducts or schedules repairs. Prepare detailed service reports to document service visits, issues and troubleshooting actions. Logs and tracks maintenance activities. Work with various departments at Hitachi Global Air Power to address concerns from the field to drive issues to a timely closure. Document service visits and generate reports with action items. Support the Sullair Training Department for customers, distributors, and employees. This position will report directly to the Field Service Manager. Duties and responsibilities: Performs any needed service on all Sullair rotary products without supervision Travel to field jobsites for troubleshooting, and service of Sullair and competitive rotary products Follow standard work for pre and post service preparation (submit expense reports, prepare service reports, make travel arrangements, complete timecards) On call as scheduled for afterhours customer support Follow all Environmental Health and Safety policies and procedures Communicate distributor feedback to Sullair management as Voice of Customer Drive field concerns to closure in a timely manner Support goal of service within the Service Department of 95% Contribute to positive Company branding by projecting a knowledgeable, professional, and customer-oriented image to customers Perform all duties in accordance with company standards, while always striving to understand the needs and expectations of the customer Dedicated to completion of responsibilities Must be fluent in English and have a valid driver's license. Must possess a valid driver's license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to: DUI in the previous 5 years, Hit & Run, License Suspension, Reckless/Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years Must be able to lift to 50 lbs. on a regular basis and work in industrial environments including extremes in temperature with continuous walking, reaching, bending, and kneeling Employee will use company provided equipment and will be required to travel to attend company provided training Employee is required to have their own tools to perform their job duties Operate a company vehicle safely and in compliance with all traffic laws and HGAP policies Education: High School Diploma or equivalent (Related industry experience may be considered in lieu of education requirements) Associate degree a plus Technical Trade School a plus Training Requirements The following training must be completed within 6-9 months of the hire date to satisfy the Field Service Technician tier within the HAC Technician Advancement Program. Sullair “Certified Technician” Online Oil Flooded Basics Stationary Controllers Introduction to Control System Oil Sampling Introduction to electrical basics In Person Oil Flooded stationary Electrical fundamentals Sullair Online Piping / instrumentation diagrams Introduction to VSD Communication and sequencing In Person Microprocessor and controls Variable speed drives Refrigeration / EPA certified Compressed air challenge - Level 1 Professional experience: 2-3 years of air compressor commissioning and maintenance experience Experience with rotary screw Oil Free Compressors a plus Demonstrated success in technical aptitudes of compressed air systems Experience with industrial product manufacturing and processes Strong verbal and written communication skills Must be able to engage and communicate effectively with all levels of the organization Strong grasp of Microsoft office required Ability to read and understand schematics Ability to work independently or on a team Key behaviors: On time to all meetings / appointments / and scheduled engagements Disciplined and reliable work habits Dedicated to completion of responsibilities and work safety Willing to accept responsibilities within a team environment Direct reports: N/A The successful candidate is responsible for complying with Hitachi's Code of Ethics and related policies. In performing the job, the incumbent shall take all steps necessary to comply with our safety rules and requirements and must actively support the organization's efforts to meet and exceed its goals of creating and maintaining a safe workplace. This description is to serve as a guide. It is intended to be flexible and will continue to evolve over time with business needs and demands and may be updated periodically and at the Company's discretion. Hitachi Global Air Power is an equal opportunity employer and will not discriminate based on race, religion, color, age, gender, sexual orientation, national origin, genetic information, veteran status, physical or mental disability, or other protected categories under applicable law, whether in recruitment, employment, promotion, transfer, compensation, or other conditions of employment.

A full-time, permanent placement at our client company in Salt Lake City, Utah. The employer is a stable manufacturer of process analytical instruments. This is a hybrid in-house technician and field service rep position with travel averaging 20%. You will assist in assembling and testing analyzers and installing, maintaining, and repairing process equipment. Location: Salt Lake City, UT Duties Include: Installs, repairs, and maintains gas analysis and process instruments at customer sites; repairs defective customer equipment in-house. Maintains in-house repair facilities, including calibration, repair, and maintenance of toxic gas monitoring systems, maintenance of in-house test equipment, etc. Provides technical assistance to customers and all departments, including research on parts and technical questions and assistance with Requests for Quotations. Assists with QA of products before shipment when required. Assists with constructing and validating products, including wiring analyzer boxes, setup computers, and wiring I/O and AC circuits. Ideal Skills/Knowledge: AA or equivalent experience in electronics, military training or a related STEM technology Two or more years of experience servicing complex instruments or equipment Experience with analyzers a plus but not required Exposure to AutoCAD a plus Able to travel up to 10%-25% What To Expect: A collaborative community at the forefront of new ideas and creations Competitive pay with overtime Comprehensive medical benefits package, including health, vision, dental 401K with company match Upgrading Talent, Enhancing Careers TESA Talent Advisory is an executive search firm deeply committed and connected to the laboratory sciences industry, partnering with innovative and exciting employers in niche science industries while providing life-changing careers to superior talent. tesatalent.com

Great Western Trailer (GWT) is actively hiring skilled and motivated Trailer Technicians to join our growing team at our Salt Lake City, UT facility. If you have experience in semi-trailer maintenance and repair and are looking for a company that values your skills and dedication, we encourage you to apply today. Be a part of our team - Apply now! What's in it for you? Weekly Paychecks - Get paid on time, every time. Weekday Schedule - Monday-Friday, 8:00 AM - 4:30 PM (No weekends!). Comprehensive Benefits Package - Health, dental, vision, and life insurance. 401K, Flexible Spending & Health Savings Account options. Paid Time Off & Sick Leave - Enjoy work-life balance. Employee Perks - Discounts, Employee Assistance Program, and a $400 Benefit Card. Who We're Looking For GWT is looking for dedicated individuals who are: Quick Learners - Willing to follow instructions, ask questions, and grow their skills. Team Players - Punctual, reliable, and able to work independently or collaboratively. Detail-Oriented - Focused on quality, accuracy, and safety. Trailer Technician Responsibilities Inspect and repair semi-trailers, including brakes, wiring, bodywork, lift gates, and more. Install and replace add-on components such as toolboxes, winches, and ramp kits. Perform fabrication and welding as needed. Complete service reports and ensure all work meets quality and safety standards. Required Qualifications Reliable transportation to and from work. Own a personal set of hand tools. Strong mechanical aptitude and experience with semi-trailer equipment and maintenance. Ability to operate hand tools, power tools, and pneumatic tools safely and efficiently. Willingness to work overtime when needed. Preferred Qualifications Valid driver's license (a plus, but not required). 3+ years of experience in semi-trailer repairs. Industry certifications such as ASE or welding certification. Bilingual (Spanish) is a valuable asset. Physical Demands & Work Environment Frequent standing, walking, kneeling, and lifting (up to 50 lbs.). Work may be performed in a shop, yard, or mobile service environment. Exposure to mechanical parts, chemicals, fumes, and varying temperatures. Moderate to loud noise levels. About Great Western Trailer Great Western Trailer (GWT) is a fast-growing Semi-Trailer Sales, Leasing, Rental, and Service company with 10 locations across 8 states-and more expansions coming soon! We operate in Fontana, CA; Albuquerque, NM; Phoenix, AZ; Grants Pass, OR; Dallas, TX; Houston, TX; Dearborn, MI; Salt Lake City, UT; Oklahoma City, OK; and Tulsa, OK. Apply Today! If you have the skills and passion for semi-trailer repair, we want to hear from you. Join a company that values your hard work and offers opportunities for career advancement. Apply now and take your career to the next level with Great Western Trailer in Salt Lake City, UT! This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice.

Taurus Industrial Group's Specialty Services division is seeking skilled and motivated Field Services Technicians to join our growing team. We provide advanced industrial solutions across power generation, petrochemical, refining, and manufacturing sectors. Our technicians are trusted partners to our clients, delivering precision work in bolting, torquing, machining, induction heating, line-stop, and related specialty field services. If you are a hands-on professional with technical acumen, a safety-first mindset, and the ability to thrive in challenging field environments, we want to hear from you. Key Responsibilities Perform on-site bolting, torquing, tensioning, and induction heating services on critical equipment. Support field machining, hot tapping, and line-stop operations as needed. Install, operate, troubleshoot, and maintain specialized tools and OEM induction equipment. Ensure all work adheres to safety, quality, and compliance standards. Interpret technical drawings, job packages, and client specifications. Collaborate with project managers, supervisors, and customer representatives to ensure timely, accurate, and efficient service delivery. Maintain, calibrate, and prepare rental and company-owned specialty equipment. Travel extensively to client facilities across regional and national assignments. Recommended Qualifications & Requirements Experience: Minimum 3-5 years in industrial services, mechanical maintenance, or specialty field service roles (power plants, refineries, petrochemical, or heavy industry preferred). Certifications/Training: NCCER, OSHA, or equivalent field qualifications (preferred). OEM training on induction heating or bolting/tensioning equipment (a plus). Technical Skills: Proficient in hydraulic, pneumatic, and electronic tool operation. Familiarity with torque/tension charts, machining tolerances, and mechanical fit-up. Physical Requirements: Ability to lift to 50 lbs, work at heights, and endure confined space conditions. Willingness to work extended shifts, nights, weekends, and travel on short notice. Soft Skills: Strong commitment to safety and quality. Clear communication and problem-solving skills. Team-oriented with the ability to adapt to dynamic field environments. Why Join Taurus Industrial Group? Competitive pay with overtime opportunities. Comprehensive benefits: health, dental, vision, 401(k), PTO. Professional training and advancement opportunities. Exposure to cutting-edge specialty service technologies and OEM equipment. Be part of a growing, innovative company that values technical excellence and field expertise. 📍 Locations: Nationwide travel, with primary needs in Texas, Gulf Coast, Northeast, Midwest, and Western U.S. BE SURE TO APPLY ON OUR WEBSITE: ****************

Job Description *Free Milwaukee Packout or Blackstone Griddle just for interviewing! Expert Plumbing, Heating, Air, and Electrical is scouting a full-time Plumbing Services / Lead Technician to join our growing Orem, UT team. Can you expertly complete installation, maintenance, and repairs of piping systems? Can you provide above-and-beyond customer service? Are you prepared to adhere to all current plumbing codes and safety standards? If you're the journeyman plumber we're looking for, continue reading for more information. This full-time Plumbing Services / Lead Technician position makes $80,000 - $160,000/year, pay earned through a combination of hourly wages, commissions, and bonuses, and works Monday - Friday with regular overtime and flexible hours allowing for days off as well as additional overtime. As a full-time lead technician in plumbing services, you'll receive a full benefits package including medical and dental options, vacation and holiday pay, weekly direct deposit on Fridays, a 401(k) plan with match, paid maternity or paternity leave, a company-supplied phone/iPad, company-supplied uniforms, a company vehicle with gas card, and a tool purchase program! If this sounds like the journeyman plumber opportunity for you, fill out our initial 3-minute, mobile-friendly application today! ABOUT EXPERT PLUMBING, HEATING, AIR, AND ELECTRICAL Expert Plumbing, Heating, Air, and Electrical is a full-service home services company that has been offering quality home-services solutions across Utah for over 10 years. Our services cover all areas including most of Salt Lake County and Utah County, including Lehi, Orem, and Sandy. We have a reputation for top-quality professional plumbing, electrical, and HVAC services at affordable prices. We believe our exceptional staff is what sets us apart. Every project requires dedicated employees, and our service techs work hard to provide industry-leading home services. As a rapidly growing Utah business, we're looking for enthusiastic people to come on board with us and build successful, long-term careers. We know what it takes to retain a dedicated and professional team. That's why we offer competitive pay and fantastic benefits, as well as amazing perks such as a company doctor and chiropractor with no deductible or maximum, 100% paid tuition for trades and authorized specialized trainings, free VASA gym membership to any VASA in Utah with the option to add friends and family, regular company and family events, and prizes and trips given out throughout the year! QUALIFICATIONS FOR A FULL-TIME PLUMBING SERVICES / LEAD TECHNICIAN Ability to pass a background check and drug test Valid driver's license and clean driving record No smoking, chewing or vaping on job sites or on/in company property Have basic hand tools for the trade Ability to Lift 75 LBS Can you independently perform plumbing installations, maintenance, and repairs? Do you enjoy interacting with customers? Do you have strong communication skills? Are you detail-oriented? Do you put safety first? Are you willing to learn? Do you take pride in your workmanship? If so, apply now because you're the journeyman plumber we want to meet! *Must have an active Journeyman or Master Plumbing License. All candidates selected and that come in for the interview will receive a packout or blackstone.

• Develop advance examination techniques of materials in accordance with procedures, codes, standards, and specifications. • Be thoroughly familiar with the scope and limitations of the methods for which qualified and exercise assigned responsibility for OJT and guidance of trainees • Interface with department managers and clients to determine scope of work and work priorities in order to meet customer expectations. • Be able to prepare written instructions and to organize and report the results of examinations. • Work independently and support team members. Perform other job related tasks as needed and assigned by supervisors. • Administer examinations (written and practical) and providing training to Level II Technicians and Trainees. Perform other job-related tasks as assigned by management Demonstrated ability to effectively perform assigned NDT tasks and interpret results of inspections . Knowledge of NDT equipment . High School Diploma or equivalent Requirements . Complete and pass a DISA Background check . Complete and pass all required Drug Screens . Complete and pass site specific safety council . MUST TEST OUT IN ALL REQUIRED METHODS WITH XCEL Qualifications • Level III UT with PAUT certification required. • 5+ years of UT/PAUT experience. • Travel required. • Additional NDT Level III preferred (MT/PT/ET/VT/RT - CR/DR) - Meet the minimum requirements of an NDT Level III Technician; provide documentation of education, training, and experience in the applicable NDT method(s); have a working knowledge of industrial environments and general manufacturing processes; ability to effectively communicate with other departments, and customers to report issues and solve problems. Desired Competencies: Strong work ethic. Dependable, Exceptional safety and quality awareness. Mechanical aptitude. Adaptable to changing schedules. Exceptional attention to detail. Teamwork. Ability to follow directions and procedures XCEL NDT, LLC. is an equal opportunity employer where employment is based upon personal capabilities and qualifications without discrimination because of race, color, religion, gender, age, national origin, disability, veteran status or any other protected characteristic as established by law Work Conditions/Physical Requirements: Move, carry and lift objects in excess of 50 pounds Climb and perform work from ladders, stairs and scaffolding in excess of 100 feet, continuously throughout shift Be able to climb ladders and platforms up to 250 feet with a harness and lanyard Be able to step up into vehicles or onto equipment Work extended hours and stand for extended periods of time Work in indoor and outdoor environments in conditions of extreme heat and cold Work in and near industrial hazards

About Us: Liberty Tire Recycling is a high-growth company and the premier provider of tire recycling services in North America with operations throughout the United States and Canada. Liberty Tire annually transforms more than 210 million tires into raw materials for smart, sustainable products that improve our environment and people's lives. The Company is private equity-owned, has approximately 60 sites in the US and Canada, and nearly 4,000 employees. With innovative tools, technologies and processes, Liberty Tire is a revolutionary American conservation enterprise - from coast to coast, and from whole tire to end products. The company's commitment to finding new and better ways to RECLAIM, RECYCLE and REUSE bridges the sustainability goals of scrap tire generators nationwide with those of local scrap rubber consumers. Walk-In Interviews Date: January 28th, 2026 Time: 8:00 am - 3:00 pm Location: 1398 N Beck St. Salt Lake City, UT 84116 Job Summary: Liberty Tire Recycling is looking for a Plant Maintenance Technician. As a Plant Maintenance Technician, you would be responsible for the day-to-day electrical and mechanical support for large industrial machines in our manufacturing facility. You will be maintaining and repairing a variety of industrial equipment, including shredding machines, granulators, and bucket elevators. This role requires a proactive approach to equipment maintenance, ensuring that all machinery operates efficiently and safely at our Salt Lake City, UT facility. Successful candidates must be able to understand, assess, troubleshoot, and refurbish different arrangements of pneumatic & electronic instrumentation, electrical applications as necessary. Duties and Responsibilities: Conduct preventive maintenance on industrial equipment and other machinery to ensure optimal performance. Troubleshooting and maintaining the electrical-mechanical machines in the manufacturing facility. Document actions, parts and time-usage to work orders. Diagnose and repair mechanical and electrical issues on company's equipment. Inspect and repair manufacturing machines as required. Keep detailed records of maintenance and repair work. Ensure compliance with safety regulations and company policies. Collaborate with other team members to improve equipment efficiency and reliability. Fabricate and assemble metal parts by cutting, shaping, and welding components. Other duties as needed. Skills and Abilities: Proven experience as an Industrial technician, preferably in a recycling or manufacturing environment. Strong electrical knowledge and experience with industrial electrical systems. Ability to read and interpret technical diagrams and manuals. Ability to work independently and as part of a team in a fast-paced setting. Certifications or technical training in mechanics and electrical systems is a plus Education and Experience: 2-3 years experience in the tire recycling or manufacturing industry Minimum of 2 years of welding experience in a manufacturing, construction, or industrial setting (highly preferred). A minimum of 2+ years of experience as a Maintenance electrician in a manufacturing or industrial setting. Knowledge of metal properties and appropriate welding techniques. Proficient in MIG, TIG, Stick, and/or flux-core welding. In Depth knowledge of electrical systems, machinery and circuitry. Certification or degree in Electrical or Industrial Maintenance is preferred. EEO Statement: Liberty Tire Recycling is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sex, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.

Job Description National Technologies (NTI), a Network Connex Company, is a premier turnkey installer of fiber optic and data center infrastructure. Working on our team puts you on the leading edge of innovation in the digital communications space. If being a part of a tight-knit organization that operates in some of the most advanced technology environments around the world sounds like a dream job, NTI might be the right fit for you! With the perks of a large organization, NTI remains true to its roots as a home-grown company with an open door culture that welcomes new ideas and encourages professional growth. We set you on the right path with careful onboarding and thorough training programs that prepare you for success in your role and beyond. Job Summary: NTI is seeking an experienced and detail-oriented Fiber Splicer to join our team in a union position under IBEW Local 20. The Fiber Splicer will be responsible for the installation, maintenance, and repair of high-count fiber optic cables, ensuring optimal performance of telecommunications networks. This role requires advanced technical expertise in fusion splicing, testing, and troubleshooting, with a focus on working with live fiber networks during maintenance windows. Candidates must have a proven track record of splicing and testing for Zayo and other dark fiber providers, along with extensive experience using Fujikura fusion splicing machines, EXFO testing equipment, and FastReporter software. Job Duties and Responsibilities: Fiber Splicing and Installation: Perform fusion splicing on high-count fiber cables, including 864ct, 1728ct, and 3456ct, with precision and adherence to industry standards. Execute mid-sheath (ring-cut) splicing on high-count fiber cables to support network expansions and repairs. Conduct live fiber network splicing during designated maintenance windows to minimize service disruptions. Install fiber optic cables in various environments, including underground, aerial, and indoor settings. Testing and Troubleshooting: Perform Optical Time-Domain Reflectometer (OTDR) testing to evaluate fiber optic cable integrity and performance. Conduct Optical Loss Test Set (OLTS) testing to measure signal loss and ensure network reliability. Troubleshoot live/active network fiber issues, identifying and resolving faults to maintain service continuity. Generate detailed FastReporter reports to document test results, splicing activities, and network performance for client submission. Equipment and Software Proficiency: Operate Fujikura fusion splicing machines to achieve low-loss splices on high-count fiber cables. Utilize EXFO testing equipment for accurate OTDR and OLTS testing, ensuring compliance with client specifications. Leverage FastReporter software to produce comprehensive reports for network documentation and quality assurance. Additional Technical Tasks: Pull fiber optic cables through conduits, ducts, or other pathways to support network installations. Assist in bolting telecommunications cabinets to secure infrastructure components (preferred skill). Install basket trays to organize and protect cabling systems (preferred skill). Operate scissor lifts safely for aerial or elevated work (preferred skill). Safety and Compliance: Adhere to all safety protocols, including OSHA regulations and NTI's safety standards, to ensure a safe working environment. Maintain a clean workspace and follow proper handling procedures for fiber optic materials and equipment. Complete required documentation for splicing, testing, and maintenance activities in accordance with company and client standards. Work Schedule and Environment: Work indoors and outdoors in various weather conditions, adapting to project requirements. Perform tasks during daytime and occasional nighttime maintenance windows as required by client schedules. Stand for extended periods (8-10 hours per day) and perform physically demanding tasks, including lifting and carrying up to 50 pounds. Education and Experience: Experience with Dark Fiber Providers: Minimum of 2-3 years of verifiable experience splicing and testing fiber optic cables for Zayo and other dark fiber providers, with a demonstrated ability to meet stringent quality and performance standards. Equipment and Software Expertise: At least 3 years of hands-on experience using Fujikura fusion splicing machines for high-count fiber splicing (864ct, 1728ct, 3456ct). Minimum of 3 years of experience performing OTDR and OLTS testing with EXFO testing equipment, ensuring accurate diagnostics and reporting. At least 2 years of experience producing FastReporter reports for network documentation, with proficiency in analyzing and presenting test data. Technical Skills and Knowledge: Proven ability to perform mid-sheath (ring-cut) splicing on high-count fiber cables. Familiarity with live fiber network splicing during maintenance windows to ensure minimal service disruption. Strong troubleshooting skills for diagnosing and resolving issues on live/active network fiber. Experience in cable pulling to support fiber optic network installations (required). Knowledge of cabinet bolting techniques (preferred). Familiarity with installing basket trays for cable management (preferred). Experience operating scissor lifts for elevated work (preferred). Physical and Environmental Requirements: Ability to lift and carry a minimum of 50 pounds. Ability to travel nationally. The average rotation is 10 days out, 5 days home. Capability to work indoors and outdoors in various weather conditions. Ability to stand for 8-10 hours per day and perform physically demanding tasks. Background and Compliance: Must pass a clean background check and drug screen as a condition of employment. Fluency in English for effective communication with team members and clients. Union Affiliation: This is a union position under IBEW Local 20, requiring adherence to union agreements, policies, and benefits structures. Preferred Qualifications: Certification in fiber optic splicing or testing (e.g., FOA CFOT, BICSI, or equivalent). Prior experience working on projects for major telecommunications carriers or dark fiber providers beyond Zayo. Familiarity with additional fiber optic testing tools or software beyond EXFO and FastReporter. Valid driver's license and ability to travel to project sites as needed. Benefits: Competitive union wages and benefits package through IBEW Local 20, including health insurance, retirement plans, and paid time off. Opportunities for professional development and training in advanced fiber optic technologies. Access to a supportive union environment with representation and advocacy. Collaborative and safety-focused work culture at NTI. NTI provides a comprehensive benefits package including health, dental, vision, life, and disability insurance and retirement savings options. For Union employees, pay rates and benefit levels are determined by union classifications which are set by the union. National Technologies (NTI) believes all persons are entitled to equal employment opportunities and does not discriminate against employees or job applicants because of race, color, gender, affectional or sexual orientation, domestic partnership status, ancestry, religion, national origin, citizenship status, marital status, disability, veteran status, age or any other protected group status. Upon acceptance of an offer, all candidates will be required to pass a background check and drug screening.

**Let's Connect APPLY TODAY To Schedule Your On Site Interview!** **Text "Goodyear" to 66866 to connect with a recruiter!** **Starting pay for the market: ** $25.00-30.00 **Primary Work Location:** 1864 S 3730 WSalt Lake City, UT 84104 **Shift Information:** We offer two shifts running from 9am-6pm and 9pm-4am **About the Role: What will you do?** + **Servicing delivery vans and DOT vehicles** for scheduled preventative maintenance at a client site + Perform line technician services such as oil changes and tire services, routine inspections/maintenance, system diagnostics, brake repairs, fluid exchanges/flushes, preventative maintenance, and tire installation + Advanced repairs and state inspections + Using a company vehicle, you will be traveling to various client sites to perform these services **What's in it for you:** + Comprehensive benefits package including medical, prescription drug, vision, dental plans and Wellness Program + 401(k) with company matching with a 2% Match + Life Insurance (100% Company Paid) + 40 Hours of vacation time in your first year and holidays + Tuition Reimbursement up to $5,250 + On-going Training and further career advancement opportunities **Learn about our culture!** Click Here to Hear from our Associates! (********************************************************************************************* **Basic Requirements** + 2 years of experience performing qualified DOT regulated inspections, preventative maintenance, and brake related services + Must have DOT Brake Certification, or be willing to obtain within 30 days of hire + Must have a valid driver's license and meet DOT physical requirements, including being at least 21 years of age **About Us:** ** ** We are a service and retreading market leader with over 200 Commercial Tire Centers and Truck Care Centers located across the United States. We have the unique ability to service the largest nationwide commercial fleets while also providing friendly hometown service to regional and local fleets. Our mission statement is 'SERVICE EXCELLENCE - ALWAYS'. Goodyear Commercial Tire & Service Centers (CTSC) are owned by Goodyear - which makes them uniquely qualified to offer you trusted tires, reliable services and powerful management tools to help you lower your operating costs. It's all part of Goodyear's Total Solution for commercial and off-the-road fleets. **Application Process** + Within 5 minutes of applying, you'll get an email and text with a link to complete the prescreen questionnaire on any device. + If you pass, you'll receive an invitation to schedule a phone or in-person interview. + Your Goodyear application dashboard shows status updates and your recruiter's contact detail for assistance. \#veteran #army #marine #navy #airforce #coastguard #nationalguard #womensupportingwomen #femcanicgarage #nowhiring #applytoday #instajob #womeninautomotive #community #autorepair #mechaniclife #carmaintenance #autojobs #automotivecareers #womentrades #diversityintech #skilledtrades #futureofwork Commercial Tires, Training, Team Building, Work Schedules, Mobile Mechanic, On Call, Roadside Repair, Semi Trucks, Tire Repair, Tire Installation, Tire Service, Commercial Vehicles, Fleet Vehicles, Fleet Service Technician, Retread, Commercial Truck, Diesel Mechanic, General Mechanic, Brake Technician, Transmission Technician, Certified Automotive Technician (ASE), L1 Technician, L2 Technician, L3 Technician, Mechanic, Automotive Service Technician, General Service Technician, Master Automotive Technician, Automotive Mechanic, Automotive Mechanic Technician, Automotive Repair Technician, Automotive, Specialist, Automotive Diagnostic Technician, Automotive Maintenance Technician, Automotive Engine Technician GOODYEAR IS AN EQUAL OPPORTUNITY EMPLOYER Goodyear is an Equal Employment Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regards to that individual's race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender identity, age, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Click here for more information about Equal Opportunity laws and here for related information. See Goodyear's EEO & Affirmative Action Policy Affirmation here.

Job DescriptionDescription: This role directly reports to the Service Department Manager and works closely with the Service Department Equipment Repair Team to maintain and repair recycling equipment throughout the Wasatch Front. Technicians are crucial to keeping our customers' recycling equipment and programs running efficiently. Essential Job Duties and Responsibilities Performing all physical duties related to providing maintenance, service, and troubleshooting a variety of recycling equipment (balers, compactors, and conveyors) at customer locations, and maintaining a clean service van and its inventory Performing all activities related to reading mechanical assembly drawings, electrical, and pneumatic schematics Filling out all paperwork related to each service ticket and day-to-day field technician duties Communicating clearly and effectively with clients and team members to provide excellent internal and external customer service Requirements: 1+ years' experience reading mechanical assembly drawings, electrical, and pneumatic schematics 1+ years' experience troubleshooting equipment to identify common problems Ability to use a voltmeter and pressure flow gauges to review and validate circuit amperage, voltage, and pressure levels Excellent customer service skills Ability and willingness to travel 25% of the time Ability to take feedback from customers and team members openly and actively work to improve skill sets and behaviors Field service technician experience is preferred, but not mandatory Must have a valid US-issued driver's license, clean driving record, and clean criminal history Ability to pass a drug test Key Competencies Positive Attitude Honesty and integrity Punctuality, consistency, and reliability Can-do attitude Going beyond the call of duty Detail oriented Willingness to learn and grow with the company Team player

STARTING AT $31/HR! ARE YOU A MAINTENANCE TECHNICIAN READY TO PARTNER WITH THE BEST? DAILY'S IS HIRING FOR MAINTENANCE TECHNICIANS! $31 - UP (DOE). Maintenance technician Performs mechanic skills including, but not limited to mechanical, electrical, pneumatic, and hydraulic troubleshooting and repair of various production and packaging machines. ESSENTIAL DUTIES/RESPONSIBILITIES include, but are not limited to the following: Able to read and interpret equipment manuals and work orders to perform required maintenance. Provide emergency repairs on production equipment (as assigned by Dispatch, Leads, or Management) to always keep lines operational. Use of power tools, drill press, weld, shop tools, etc. Perform scheduled maintenance repairs of production equipment including replacement of failed components such as bearings, belts, motors, power/control lines, etc. Diagnoses problems and replace or repair parts as needed. Dismantle defective machines and equipment and install new or repaired parts, using specifications and/or blueprints, precision measuring instruments, and hand tools. Adjust various types of devices and control systems. Clean and lubricate parts as required. Confirm that equipment is operating to production standards. Other duties as assigned. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the work environment, knowledge, skill, and/or ability required or preferred. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Food or Medical plant experience is preferred. Basic hydraulics/pneumatics experience Basic Conveyor maintenance Building and grounds maintenance experience Electrical experience (480/110/low voltage) - PLC/VFD knowledge is a plus. Ammonia Refrigeration experience is a plus. Able to speak, read and write in English a must. Bilingual skills a plus - English/Spanish Able to read and follow blueprints and electrical diagrams. Experience in performing preventative maintenance. Experience in a fast-paced, cold, wet production environment. Able to interface well with production line workers and supervisors. Ability to apply mathematical concepts to practical situations preferred. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form preferred. Please Note: As part of the selection process, applicants will be required to complete a job-related aptitude test assessing technical and mechanical competencies. This assessment helps ensure candidates have the necessary skills and knowledge to succeed in the role and may also be used to identify opportunities for additional training and development. Employees may also be required to complete the same assessment within 90 days of placement to confirm technical proficiency and identify training needs. EDUCATION and/or EXPERIENCE: Minimum five years of experience in an industrial maintenance capacity preferred. Food or Medical plant experience is preferred, as well as knowledge of and compliance with Good Manufacturing Practices (GMP), and food manufacturing best practices. PHYSICAL DEMANDS Frequent need to sit, stoop, kneel, crouch, crawl, bend, push/pull, and ability to access small areas. Able to lift 50 lbs. on a regular basis Able to climb stairs and ladders, and work at elevated heights WORK ENVIRONMENT: The noise level in the work environment is usually moderate but sometimes very loud. WORK SCHEDULE: The hours and days of work are established by departmental needs and at the discretion of management. Must be available to work as scheduled. Schedule is a 2-2-3, 12-hour shift per day. At Daily's, our mission is to bring excellence to the table. We are proud to live our core values every day. We put people first. We are committed to always doing the right thing. We champion change. We win through teamwork. Daily's Premium Meats is an equal opportunity employer. We value diversity, equity, and inclusion as essential elements that create and foster a welcoming workplace. All qualified persons will be considered for employment without regard to race, creed, color, religion, gender, sexual orientation, gender identity/expression, national origin, age, genetic information, disability, veteran status, pregnancy or related condition, or any other basis protected by law.

Job DescriptionSalary: DOE **This is a Rotating shift position, Successful Candidate will be expected to work 4 days on 4 days off 12Hr Rotation Shift** Position Overview:We are seeking a highly skilled Maintenance Technician to join our mission critical team. This role will focus on Preventative and Predictive maintenance practices to keep our power plant operating efficiently and to provide uninterruptible power to our Data Centers. The ideal candidate will have extensive experience in generator operations, troubleshooting, and performance optimization. Key Responsibilities: Execute service on the engines in compliance with the maintenance protocol. For example checking oil, replace filters and valves and diverse types of measurements. Carry out minor repairs on the engine additional to the planned service Execute major service on the engine in cooperation with colleagues in compliance with the protocol for major service Coordinate the task with external suppliers who provide specialist duties Monitor activities of the maintenance compliant to the EHS protocol Troubleshooting engines on the field of Electronics and mechanics Create a report on common faults and describe the background of this fault Work effectively as part of a team of technicians or independently Process timesheets, expense reports, Environmental Health and Safety (EHS) forms, and job reports in a timely manner Comply with all EHS policies and procedures to ensure a safe and productive work site Perform other duties as assigned Collaborate with engineering and operations teams to ensure alignment of generator systems with overall data center infrastructure. Assist in the development and execution of generator replacement and upgrade plans. Qualifications: 4 years of reciprocating engine experience preferred Strong understanding of generator systems, including electrical, mechanical, and control systems. Proven experience in troubleshooting and resolving technical issues. Excellent communication and interpersonal skills. Ability to work independently and as part of a team in a fast-paced environment. Benefits: Competitive compensation package. Health, dental, and vision insurance. Retirement savings plan. Opportunities for skill development and career advancement. A positive and inclusive work environment.

Admiral Beverage believes in investing in its people, business partners, and communities, to continually grow and offer the best products and services in the region. With the strength of a large company combined with a small-town, friendly, family-driven mindset; we are here to grow with you. Admiral offers: competitive wages, a full-scale benefit program including health, dental, and vision coverage, 401(k) and retirement programs, paid leave and holidays, and much, much more! Current Admiral Beverage Employees (excluding Contractors): Please apply via your internal Workday Account. A company with heart, a company who cares, a company who commits: Admiral Beverage Corporation (ABC). As an employee with ABC, you'll receive more than just a paycheck. We take pride in our impactful, rewarding culture-employing diverse people doing diverse jobs in diverse markets. Join our team for the best benefits in the beverage industry: tuition reimbursement (up to $5,250 per year), health insurance, 401K, PTO, and many other great perks! Apply today and grow with us! Let us invest in you.Job Description Primary Location: Springville, Utah Vending Machine Service Technician: Repairs, installs and services all vending equipment including beverage coolers, vending machines, fountain equipment and other appliances. This position will require an understanding of electrical circuits, refrigeration units, and small motors. Must be able to demonstrate customer service skills and ability to trouble shoot equipment malfunctions. Must be able to lift up to 50 pounds. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, toxic or caustic chemicals, outside weather conditions, risk of electrical shock, explosives, and vibration. The noise level in the work environment is usually loud. Loads, unloads, transports and installs vendors, coolers and other appliances for use at customer locations. Disassembles and reassembles appliances and replaces and repairs mechanical and electrical parts. Perform required sanitation service on appliances. Utilize tools and diagnostic equipment such as wattmeter, refrigeration equipment, ammeter, or voltmeter to diagnose appliances during operating cycle to detect malfunctions, excess vibration, overheating, fluid leaks, and loose parts. Calibrates control devices such as timers and thermostats and adjusts contact points. Cleans and washes parts. Replaces worn or defective parts such as panels, switches, pumps, compressors, bearings, transmissions, belts, gears, blowers, and defective wiring. Repairs and adjusts appliance motors. Reassembles appliance, adjusts and lubricates moving parts. Responds to customer call-in needs on an on-call basis as scheduled during non-business hours. Completes vehicle, service call logs and other associated forms. Keeps assigned service vehicle clean, performs pre trip inspection and routine oil, water and air maintenance. Cleans shop work area. Wears and utilizes appropriate safety equipment. Wears company provided uniform and presents professional appearance to customers and market place. Other duties may be assigned by the immediate supervisor or other supervisor at any time. Reliable. Caring. Committed. If this sounds like you, you'll fit right in. Follow this link to our online application. Admiral Beverage is a drug-free workplace and requires a background check to begin employment. We want to know how you heard about us! Be sure to select an option when you fill out your application- Employee Referral or one of the Job Boards!

**Discover a more connected career** At Ervin Cable Construction, LLC, as a Fiber Splicer II, you'll complete the process of fusing optical fibers, to maintain our telecommunication networks.Your splicing work is essential for keeping strong and reliable connections, ensuring data travels seamlessly through our continually growing network. **Connecting you to great benefits** + Weekly Paychecks + Paid Time Off, Parental Leave, and Holidays + Insurance (including medical, prescription drug, dental, vision, disability, life insurance) + 401(k) w/ Company Match + Stock Purchase Plan + Education Reimbursement + Legal Insurance + Discounts on gym memberships, pet insurance, and much more! **What you'll do** + Perform cable upgrades and splicing tasks, both aerial and underground + Test, activate, and troubleshoot the network's circuit post-installation + Ensure all splicing operations meet strict customer and industry standards + Upgrade existing fiber sheaths with new fiber sheaths + Mid-sheath fibers for entry on loose tube or fiber sheaths + Cut away the sheath from existing cables to reach faulty connections, and remove the sheath and insulation from newly installed cables and wires + Provide guidance to other splicers, as needed + Complete basic daily maintenance of vehicles, including fluid checks + Document work performed through daily production reports, including marking up maps and keeping correct material usage records + Other duties as assigned **What you'll need** + To be 18 years of age or older + Authorization to work in the United States for this company + High School Diploma, GED equivalent, or relevant work experience + Valid State driver's license (cannot be considered Provisional), including an acceptable driving record + Must be able to pass a DOT physical exam, resulting in a valid medical card + At least two years of fiber splicing experience Additional qualifications + Certified pole climber or capable of demonstrating proficiency as a pole climber, is preferred + Knowledge of telecommunications network structure **Physical abilities & exposures** + **Routinely:** work at heights, occasional entry into attics and crawl spaces and alone in remote locations, operate vehicle and heavy machinery; squeeze, fine hand motion, bend, stoop, stand, walk, climb stairs, and lift up to 55 pounds without assistance. + **Occasionally** : work in confined spaces, use ladder and gaffs for climbing poles, keyboard and mouse **Why grow your career with us** Your career here is more than just a job - it's your pathway to opportunity. Our hands-on training, supportive environment, and responsive leadership connect you to work with purpose. Our commitment to you extends beyond professional development to a safety-first culture that ensures you can do what you do best, with peace of mind. **Building stronger solutions together** Our company is an equal-opportunity employer - we are committed to providing a work environment where everyone can thrive, grow, and feel connected. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Advanced Drainage Systems is a leading manufacturer of stormwater and onsite septic wastewater solutions, committed to sustainability and innovation. With a vast manufacturing and distribution network, we deliver high-quality products across multiple industries while recycling over half a billion pounds of plastic annually. At ADS, we foster a culture where diverse perspectives drive better ideas, ensuring every employee feels valued, heard, and empowered to make an impact. Responsibilities We are looking for a Maintenance Technician II to join our team! In this role, you will perform preventive and reactive maintenance duties required for the manufacturing operations of the plant. Your priorities will include executing PM schedules, repairing equipment to maintain maximum production rates, and maintaining an adequate spare parts inventory. If you are passionate about maintenance and sustainability, we would love to hear from you! Key Responsibilities Troubleshoot and perform repairs on machines and their controls (extruders, corrugators, extrusion die, DC/AC motor & drives, downstream equipment, chillers, etc.). Maintain and build job skills through company training programs. Contact, specify, and order replacement parts & control components from suppliers as needed. Effectively contribute to CMMS performance through timely PM & Repair Work Order completion while ensuring compliance. First responder to troubleshooting machine problems; contact Electrical Engineering if additional support is needed. Support Daily Management directives and initiatives. Help develop and implement Continuous Improvement projects to improve production efficiencies and safety. Work with Production Staff to ensure the safe and reliable operation of plant equipment. Qualifications High School / Vocational School Diploma or Equivalent. Ability to lift 50 pounds to a height of 6 feet. Ability to stand and be mobile for a minimum of 8 continuous hours. Ability to perform physical labor for extended periods of time in temperature extremes. Ability to handle materials daily using hands, arms, and legs. Full range of body motion including twisting, bending, reaching, squatting, and mounting/dismounting industrial equipment and vehicles. Technician level - Electrical, hydraulics, pneumatic preferred. Basic PLC and Drive training preferred. +2 years Industrial Maintenance, Electrical Systems and Controls preferred. Plastic process knowledge preferred. Skills & Competencies Experience using Electrical Test equipment: Voltmeter, Ammeter, ohm meter, Megger, etc. Understanding basic machine function and Sequence of Operations of production machinery. Experienced in reading Electrical, pneumatics and mechanical drawings. Knowledge of NEC, UL508A and NFPA 79 codes. Lock Out Tag Out Safety procedures. Arc Flash and PPE Requirements. Strong industrial mechanical, electrical, plumbing and pneumatic skills including troubleshooting. Strong leadership ability with time management and task prioritization skills. Strong in electrical formulas and mechanical math. Knowledge of 3 Phase Industrial wiring and power distribution. AC & DC Drive / Motor PMs, wiring, programming & troubleshooting. Troubleshoot PLC I/O and networking. Motion Training with Servo Drives and Motors. Strong interpersonal skills and the ability to work with and communicate to other plant personnel as well as company resources and vendors. Proficient in Microsoft Office, Excel, and Word. Experience in Root Cause Analysis & Problem Solving. Company Benefits: Health & Welfare Benefits: Medical and prescription drug plans, telemedicine (with medical plan), dental and vision plans, virtual physical therapy*, an employee assistance program (EAP)*, and voluntary accident, critical illness, and hospital indemnification programs. Financial Benefits: Retirement 401k program with company match, an employee stock purchase plan (voluntary), financial wellness planning*, paid parental leave*, flexible spending accounts (FSA) for child care and health care, short-term and long-term disability*, basic life insurance, accidental death and dismemberment (AD&D)*, adoption financial reimbursement*, tuition reimbursement*, voluntary life insurance (for employees, spouses, and children), and voluntary identity theft and fraud protection. *100% paid by ADS. Why Join ADS? Growth Opportunities & Global Presence: With a global network of approximately 70 manufacturing plants and 40 distribution centers, ADS offers extensive opportunities for career growth and development in various locations around the world. Inclusive and Creative Work Culture: ADS fosters a culture of passion, innovation, and continuous improvement, empowering employees to shape industry-leading solutions. We value diverse perspectives, recognizing that they drive better ideas, processes, and performance. Our workplace is built on respect, inclusivity, and shared responsibility, ensuring every team member feels valued and contributes to our collective success. Innovative & Sustainability Focused: Advanced Drainage Systems is one of the largest plastic recyclers in North America, ensuring over half a billion pounds of plastic is kept out of landfills every year. Learn More: ******************************** EEO Statement ADS supports an inclusive workplace that values diversity of thought, experience, and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. ADS is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law.

Advanced Drainage Systems is a leading manufacturer of stormwater and onsite septic wastewater solutions, committed to sustainability and innovation. With a vast manufacturing and distribution network, we deliver high-quality products across multiple industries while recycling over half a billion pounds of plastic annually. At ADS, we foster a culture where diverse perspectives drive better ideas, ensuring every employee feels valued, heard, and empowered to make an impact. Responsibilities We are looking for a Maintenance Technician II to join our team! In this role, you will perform preventive and reactive maintenance duties required for the manufacturing operations of the plant. Your priorities will include executing PM schedules, repairing equipment to maintain maximum production rates, and maintaining an adequate spare parts inventory. If you are passionate about maintenance and sustainability, we would love to hear from you! Key Responsibilities * Troubleshoot and perform repairs on machines and their controls (extruders, corrugators, extrusion die, DC/AC motor & drives, downstream equipment, chillers, etc.). * Maintain and build job skills through company training programs. * Contact, specify, and order replacement parts & control components from suppliers as needed. * Effectively contribute to CMMS performance through timely PM & Repair Work Order completion while ensuring compliance. * First responder to troubleshooting machine problems; contact Electrical Engineering if additional support is needed. * Support Daily Management directives and initiatives. * Help develop and implement Continuous Improvement projects to improve production efficiencies and safety. * Work with Production Staff to ensure the safe and reliable operation of plant equipment. Qualifications * High School / Vocational School Diploma or Equivalent. * Ability to lift 50 pounds to a height of 6 feet. * Ability to stand and be mobile for a minimum of 8 continuous hours. * Ability to perform physical labor for extended periods of time in temperature extremes. * Ability to handle materials daily using hands, arms, and legs. * Full range of body motion including twisting, bending, reaching, squatting, and mounting/dismounting industrial equipment and vehicles. * Technician level - Electrical, hydraulics, pneumatic preferred. * Basic PLC and Drive training preferred. * +2 years Industrial Maintenance, Electrical Systems and Controls preferred. * Plastic process knowledge preferred. Skills & Competencies * Experience using Electrical Test equipment: Voltmeter, Ammeter, ohm meter, Megger, etc. * Understanding basic machine function and Sequence of Operations of production machinery. * Experienced in reading Electrical, pneumatics and mechanical drawings. * Knowledge of NEC, UL508A and NFPA 79 codes. * Lock Out Tag Out Safety procedures. * Arc Flash and PPE Requirements. * Strong industrial mechanical, electrical, plumbing and pneumatic skills including troubleshooting. * Strong leadership ability with time management and task prioritization skills. * Strong in electrical formulas and mechanical math. * Knowledge of 3 Phase Industrial wiring and power distribution. * AC & DC Drive / Motor PMs, wiring, programming & troubleshooting. * Troubleshoot PLC I/O and networking. * Motion Training with Servo Drives and Motors. * Strong interpersonal skills and the ability to work with and communicate to other plant personnel as well as company resources and vendors. * Proficient in Microsoft Office, Excel, and Word. * Experience in Root Cause Analysis & Problem Solving. Company Benefits: Health & Welfare Benefits: Medical and prescription drug plans, telemedicine (with medical plan), dental and vision plans, virtual physical therapy*, an employee assistance program (EAP)*, and voluntary accident, critical illness, and hospital indemnification programs. Financial Benefits: Retirement 401k program with company match, an employee stock purchase plan (voluntary), financial wellness planning*, paid parental leave*, flexible spending accounts (FSA) for child care and health care, short-term and long-term disability*, basic life insurance, accidental death and dismemberment (AD&D)*, adoption financial reimbursement*, tuition reimbursement*, voluntary life insurance (for employees, spouses, and children), and voluntary identity theft and fraud protection. * 100% paid by ADS. Why Join ADS? Growth Opportunities & Global Presence: With a global network of approximately 70 manufacturing plants and 40 distribution centers, ADS offers extensive opportunities for career growth and development in various locations around the world. Inclusive and Creative Work Culture: ADS fosters a culture of passion, innovation, and continuous improvement, empowering employees to shape industry-leading solutions. We value diverse perspectives, recognizing that they drive better ideas, processes, and performance. Our workplace is built on respect, inclusivity, and shared responsibility, ensuring every team member feels valued and contributes to our collective success. Innovative & Sustainability Focused: Advanced Drainage Systems is one of the largest plastic recyclers in North America, ensuring over half a billion pounds of plastic is kept out of landfills every year. Learn More: ******************************** EEO Statement ADS supports an inclusive workplace that values diversity of thought, experience, and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. ADS is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law.

Job Description About Ya YA Foods: Ya YA Foods is a dynamic and high-growth manufacturer of liquid food and unique beverages. With over 30 years' experience, we have evolved into a versatile manufacturer and co-packer of a variety of low acid and high acid beverage and liquid food items. We are a family-owned Canadian business who prides itself in its proven track record of satisfying the needs of global multi-national customers. We are a solution provider for our customers, always striving to exceed expectations on innovation, quality, service, and speed to market. For further information about us, please check our website at yayafoods.com A career at Ya YA FOODS will offer you the opportunity to… Build a career, not just have a job Work in a dynamic and high-growth company with very skilled professionals Become part of a teamwork focused culture Be a part of an organization that supports your future growth path Reports to: Technical Director Responsibilities: Monitor andmaintainwastewater treatment systems, ensuring compliance with local, state, and federal regulations related to water discharge and environmental standards. Perform routine inspections and tests on wastewater treatment equipment, such as pumps, valves, filters, and chemical dosing systems, to ensure proper functionality and efficiency. Troubleshoot and diagnose issues with wastewater treatment processes and equipment, implementingappropriate correctiveactions tomaintainoptimalperformance. Coordinate and oversee the disposal of waste materials and by-products generated during food manufacturing processes, adhering to waste management protocols and best practices. Maintainaccuraterecords of wastewater treatment activities, including data on water quality, flow rates, chemical usage, and equipment maintenance, to ensure compliance with reporting requirements. Collaborate with cross-functional teams, including production, engineering, and environmental health and safety, to address wastewater treatment-related concerns andoptimizeresourceutilization. Operate andmaintainutilities systems, such as boilers, chillers, compressors, and HVAC units, to ensureanuninterrupted supply of essential services for the manufacturing facility. Conduct regular inspections of utilities equipment,identifyingand addressing potential issues or inefficiencies to prevent disruptions to manufacturing operations. Follow standard operating procedures and safety guidelines when handling chemicals andoperatingequipment, promoting a safe working environment for all employees. Handle and manage the use of strong chemicals, including acids, alkalis, and disinfectants, following strict safety protocols and ensuring proper storage, handling, and disposal to prevent any hazardous incidents andmaintaina safe working environment. Participate in emergency response protocols and spill containment procedures to minimize environmental impacts in case of accidents or system failures. Generalmaintenance andupkeepof HVCA Profile High school, GED, or equivalent education. Trade or vocational school education is preferred 2 years of experience working in autilities/maintenance role in various environments isrequired. Experience working in a food and beverage manufacturing facility is preferred Able to understand and safely use various hand tools and power tools to carry out and completeutilitytasks Demonstrated knowledgeutilitysystems likeboilers, chillers, compressors, and HVAC Industrial electrical up to 480VAC Controls & instrumentations PLC/software &hardware experience Pneumatics & Hydraulic experience Ability to work both independently and within a team environment Able to communicate effectively with anyone that they mayencounteron the job Responsible for ensuring a safe working environment with team members and strict GMP practices Must be able and willing toparticipateinanon-call rotation that may include weekends, overtime, and holidays Ability to exert up to 50 pounds of force at times and/or up to 20 pounds of forcefrequently, and/or up to 10 pounds of force constantly to lift, carry, push, pull or otherwise move objects Forklift certified Ability to work in cold and hot environments Why Join Us We believe that the key to creating and growing a successful business is by investing in our people-some of whom have been a part of our team for over 30 years. This is at the core of who we are, what we do, and how we grow our business-as a versatile, automated manufacturer and co-packer of a wide variety of beverages and liquid food items. In our view, a happy team means a better workforce, a better product, and more satisfied customers. Furthermore, we encourage different perspectives and celebrate diversity in our workforce-where every employee has the opportunity to realize his or her full potential in a working environment that is supportive of everyone. Upon request, we will gladly provide accommodations to any candidate with a disability taking part in the selection process.

Job DescriptionDescription: Performance Bountiful seeks Level 2 Maintenance Technicians. We are conveniently located in Bountiful, UT just off of Highway 89. Check out our Brand-New State-Of-The-Art Service Department located off 2-15 in Woods Cross! We are seeking Full-Time career-minded Advanced Maintenance Technicians. We are a fast-paced, fun, and cohesive team with an unmatched work culture for all employees. That's right, and you can enjoy your career yet still experience huge opportunities for career growth and greater responsibility as you develop under a caring leadership team! So, If you're looking for a career and not just a job, we want to hear from you! Advanced Maintenance Mechanics complete light maintenance and repairs, including performing lube oil and filter changes, balancing and rotating tires, flushing cooling systems. Responsibilities Capable of performing lubrications, oil changes, maintenance, tire services, and inspections Precisely communicate needed repairs to Service Advisor Addressing fellow teammates and customers with patience and respect Maintain a professional appearance at all times Taking direction and mentoring from others Participate in progressive training programs Maintain store cleanliness Promote a safe work environment Assist in maintaining store equipment and tools Complete any other assigned tasks delegated by Service Management Requirements: Qualifications High school diploma/GED required 1-2 years of professional experience Completion of an automotive technology course is a plus Strong problem-solving skills Ability to communicate well with others Driver's license with good driving record Performance Automotive requires substance screening of all employees

Job Description National Technologies (NTI), a Network Connex Company, is a premier turnkey installer of fiber optic and data center infrastructure. Working on our team puts you on the leading edge of innovation in the digital communications space. If being a part of a tight-knit organization that operates in some of the most advanced technology environments around the world sounds like a dream job, NTI might be the right fit for you! With the perks of a large organization, NTI remains true to its roots as a home-grown company with an open door culture that welcomes new ideas and encourages professional growth. We set you on the right path with careful onboarding and thorough training programs that prepare you for success in your role and beyond. Job Summary: NTI is seeking a Traveling Foreman with will lead a team, ensuring projects are completed safely, on time, and to customer quality standards while performing advanced fiber optic splicing and testing tasks. This role requires national travel to various project sites and combines leadership, project management, and technical expertise in fiber optic infrastructure. Key Responsibilities: Ensure project safety, quality, schedule, and cost compliance with company/client standards. Lead 2-3 crew members, optimizing skills and equipment use. Act as primary liaison between Project Manager and crew. Interpret customer prints to plan tasks and schedule work. Hold daily pre-work meetings to align on goals and safety. Verify construction and splicing work meets standards. Complete phase-specific closeout documentation. Document job progress with photos. Maintain company equipment (vehicles, trailers, test tools). Perform precise fusion and mid-sheath splicing on high-count fiber cables (864ct, 1728ct, 3456ct). Conduct live fiber splicing during maintenance windows to minimize disruptions. Install fiber optic cables in various environments (underground, aerial, indoor). Execute OTDR/OLTS testing to assess cable performance. Troubleshoot and resolve live network fiber issues. Produce FastReporter reports for test and splicing documentation. Operate Fujikura splicers and EXFO testers for low-loss splices and diagnostics. Pull fiber cables through conduits/ducts for installations. Support cabinet bolting and basket tray installation (preferred). Safely operate scissor lifts for elevated work (preferred). Maintain a clean workspace and follow proper handling procedures for fiber optic materials and equipment. Comply with OSHA, IBEW Local, and NTI safety standards Work Schedule and Environment: Work indoors and outdoors in various weather conditions, adapting to project requirements. Perform tasks during daytime and occasional nighttime maintenance windows as required by client schedules. Stand for extended periods (8-10 hours per day) and perform physically demanding tasks, including lifting and carrying up to 50 pounds. Experience and Education: 5+ years of experience in the telecommunications industry with related experience in construction and tower work. 2-3 years of verifiable experience splicing and testing fiber optic cables for dark fiber providers (e.g., Zayo), meeting stringent quality and performance standards. 3+ years of hands-on experience using Fujikura fusion splicing machines for high-count fiber splicing (864ct, 1728ct, 3456ct). 3+ years of experience performing OTDR and OLTS testing with EXFO testing equipment. 2+ years of experience producing Fast Reporter reports for network documentation. Qualifications & Skills: Proven ability to perform mid-sheath (ring-cut) splicing and live fiber network splicing with minimal service disruption. Strong troubleshooting skills for diagnosing and resolving issues on live/active network fiber. Familiarity with cable pulling, cabinet bolting, basket tray installation, and scissor lift operation (preferred). Strong written and oral communication skills for effective team and client interactions. Proficiency in Microsoft Office (Excel, Word, Outlook) for documentation and reporting. Strong interpersonal skills and a strong work ethic. Ability to pass a clean background check and drug screen. Valid driver's license required. Fluency in English for effective communication. Certification in fiber optic splicing or testing (e.g., FOA CFOT, BICSI, or equivalent) preferred. Prior experience with major telecommunications carriers or dark fiber providers beyond Zayo preferred. Familiarity with additional fiber optic testing tools or software beyond EXFO and FastReporter preferred. Union Affiliation: This is a union position under IBEW Local requiring adherence to union agreements, policies, and benefits structures. Benefits: Competitive union wages and benefits package through IBEW Local 640, including health insurance, retirement plans, and paid time off. Opportunities for professional development and training in advanced fiber optic technologies. Access to a supportive union environment with representation and advocacy. Collaborative and safety-focused work culture at NTI. Pay rates may vary based on skills, background, experience and specific location. NTI provides a comprehensive benefits package including health, dental, vision, life, and disability insurance and retirement savings options. For Union employees, pay rates and benefit levels are determined by union classifications which are set by the union. National Technologies (NTI) believes all persons are entitled to equal employment opportunities and does not discriminate against employees or job applicants because of race, color, gender, affectional or sexual orientation, domestic partnership status, ancestry, religion, national origin, citizenship status, marital status, disability, veteran status, age or any other protected group status. Upon acceptance of an offer, all candidates will be required to pass a background check and drug screening.