Production Associate jobs at Shaw Industries - 3586 jobs

This entry-level position is responsible for learning and training on a variety of tasks to process, dry and package whey products that meet customer expectations and support the achievement of the company's vision, mission and values. Essential Functions Provide assistance to operators and learn the basics of each position. Perform preventative operator maintenance (POM) duties and complete additional cleaning tasks as determined by the supervisor. Provide support to Whey Operator during CIP process. Monitor, test and correct CIP concentrations. Assist and support cleaning-related POMs. Assist in CIP on MP RO/POL, Water HTST and all associated lines, tanks and equipment according to SOPs. Provide support to Lactose Operator and Evap Operator during CIP process. Monitor and sample RO/POL/HTST process during shutdown, CIP, and startup at specified control points and correct any deviations from defined analytical set points. Transport finished WPC80 and Lactose to storage. Maintain good communications with lead and/or supervisors to ensure a safe, continuous product flow and proper maintenance of equipment. Complete and maintain appropriate paperwork and documentation to ensure accurate record keeping. Operate and monitor assigned food safety preventative controls including verification activities, equipment operation, records requirements and corrective action database. Safely handle, prepare and use chemicals while wearing proper PPE. Attend and/or complete required safety and quality training sessions by the assigned deadlines. Comply with all company safety rules to achieve no injuries and no lost time accidents. Understand and adhere to all food safety, GMPs, and OSHA policies and procedures. Adhere to all standard GMPs and performs all work in a manner that ensures the highest standard of food safety and quality. Competencies Teamwork Oriented Problem Solving/Analysis Communication Proficiency Initiative Detail Oriented Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This job operates in a food production environment. While performing the duties of this job, the employee is frequently exposed to chemicals, moving mechanical parts and vibration. The noise level in the work environment can be loud. Physical Demands Please refer to the separate functional for this position. Position Type/Expected Hours of Work This is a full-time position, and days of work are on an alternating repeating schedule. Hours of work for training are from 5:00 a.m. - 5:00 p.m., working an alternating schedule. Once trained, anticipated transfer to night shift to fill permanent position, working from 5:00 p.m. - 5:00 a.m. working an alternating schedule. Travel No travel is expected for this position. Required Education and Experience High school diploma or GED is required for this position. Maintain current forklift certification. Preferred Education and Experience Desire two or more years in a manufacturing facility. More specifically, experience with food grade products is preferred. Bilingual in English/Spanish. Additional Eligibility Qualifications Minimum age requirement is 18. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. 5-2-2-5 5:00AM to 5:00 PM or 5:00 PM to 5:00 AM

This entry-level position is responsible for learning and training on a variety of tasks to process, dry and package whey products that meet customer expectations and support the achievement of the company's vision, mission and values. Essential Functions Provide assistance to operators and learn the basics of each position. Perform preventative operator maintenance (POM) duties and complete additional cleaning tasks as determined by the supervisor. Provide support to Whey Operator during CIP process. Monitor, test and correct CIP concentrations. Assist and support cleaning-related POMs. Assist in CIP on MP RO/POL, Water HTST and all associated lines, tanks and equipment according to SOPs. Provide support to Lactose Operator and Evap Operator during CIP process. Monitor and sample RO/POL/HTST process during shutdown, CIP, and startup at specified control points and correct any deviations from defined analytical set points. Transport finished WPC80 and Lactose to storage. Maintain good communications with lead and/or supervisors to ensure a safe, continuous product flow and proper maintenance of equipment. Complete and maintain appropriate paperwork and documentation to ensure accurate record keeping. Operate and monitor assigned food safety preventative controls including verification activities, equipment operation, records requirements and corrective action database. Safely handle, prepare and use chemicals while wearing proper PPE. Attend and/or complete required safety and quality training sessions by the assigned deadlines. Comply with all company safety rules to achieve no injuries and no lost time accidents. Understand and adhere to all food safety, GMPs, and OSHA policies and procedures. Adhere to all standard GMPs and performs all work in a manner that ensures the highest standard of food safety and quality. Competencies Teamwork Oriented Problem Solving/Analysis Communication Proficiency Initiative Detail Oriented Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This job operates in a food production environment. While performing the duties of this job, the employee is frequently exposed to chemicals, moving mechanical parts and vibration. The noise level in the work environment can be loud. Physical Demands Please refer to the separate functional for this position. Position Type/Expected Hours of Work This is a full-time position, and days of work are on an alternating repeating schedule. Hours of work for training are from 5:00 a.m. - 5:00 p.m., working an alternating schedule. Once trained, anticipated transfer to night shift to fill permanent position, working from 5:00 p.m. - 5:00 a.m. working an alternating schedule. Travel No travel is expected for this position. Required Education and Experience High school diploma or GED is required for this position. Maintain current forklift certification. Preferred Education and Experience Desire two or more years in a manufacturing facility. More specifically, experience with food grade products is preferred. Bilingual in English/Spanish. Additional Eligibility Qualifications Minimum age requirement is 18. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. 5-2-2-5 5:00AM to 5:00 PM or 5:00 PM to 5:00 AM

ESSENTIAL DUTIES AND RESPONSIBILITIES: Assemble panel components using hand tools and power tools, such as drills, impact drivers, and grinders to assist in the assembly process. Follow established processes to complete daily operational tasks within defined standards. Conduct thorough inspections of assembled panels to ensure they meet quality and safety standards, while identifying and addressing any defects. Work closely with other team members to achieve production goals and contribute to process improvement initiatives. Adhere to all safety protocols and guidelines to maintain a safe and organized work environment. Other duties may be assigned. QUALIFICATIONS: Ability to read and interpret production specifications and drawings. Ability to work independently and as part of a team. Ability to prioritize tasks. Basic computer literacy and ability to learn new software programs. Great interpersonal skills are essential to operate in and maintain a team environment. Great communication skills and ability to follow instructions. EDUCATION / EXPERIENCE High school diploma or equivalent. 0-1 years of previous experience in manufacturing preferred. What We Offer Our benefits package includes coverage of your health, wealth, and wellness for you and your eligible spouse/dependents. We offer a competitive salary and benefits package, including a 401k with company match and generous paid time off to help you balance your life. Below is a list of benefits you will enjoy while working with our company. - Three comprehensive Medical plan options Prescription Dental Vision - Company Paid Life Insurance - Voluntary Life Insurance - Supplemental Hospital Indemnity, Critical Illness, and Accident Insurance - Company-paid Short-Term Disability - Company-paid Long-Term Disability - Paid time off (PTO) and paid Holidays - 401k retirement plan with company match - Employee Assistance Program - Teladoc - Legal Insurance - Identity Theft Protection - Pet Insurance - Team Member Discount Program - Tuition Reimbursement - Yearly Wellness Clinic MITER Brands, also known as MI Windows and Doors, Milgard and PGT Industries are an equal-opportunity employer. The company does not discriminate based on religion, race, creed, color, national origin, sex, age, disability, handicap, veteran status, sexual orientation, genetic information, or any other applicable legally protected category.

Extruder Operator - Grave Shift Starting Pay: $22/hr and $2 shift differential Schedule: 2,2,3 Schedule Working Hours: 6 PM-6 AM Join the team at Milgard Windows and Doors, a proud part of MITER Brands, where precision, innovation, and craftsmanship come together to create industry-leading vinyl window and door solutions. As an Extruder Operator in our Vinyl Extrusion division, you'll be at the heart of our manufacturing process-ensuring quality, safety, and performance every step of the way. Responsibilities: Operate 1-3 PVC profile extrusion lines to meet production and quality standards Safely disassemble, clean, reassemble, and change over extrusion tooling sets using overhead crane tools Perform visual inspections and take precise measurements using calipers to ensure product quality Maintain a clean and organized work area-spray down equipment, sweep floors, and remove clutter Complete reports on productivity, machine conditions, and finished goods using bundle tickets and work orders Assist with packaging and forklift operations as needed Qualifications: Associate's degree or equivalent from a technical school or 6-12 months of related experience Forklift certification Strong oral communication and interpersonal skills Ability to read and interpret safety rules, operating manuals, and procedure documents Basic math skills (fractions, decimals, percentages, and bar graphs) Problem-solving ability and comfort with detailed instructions Tolerance for high-paced environments and multi-tasking scenarios Physical Requirements: Stand and walk for extended periods (up to 100% of the time) Regular lifting: up to 10 lbs; frequent lifting: up to 25 lbs; occasional lifting: up to 50 lbs Use of hands for handling tools and machinery Visual acuity for close-up work, color recognition, depth perception, and focus adjustment Work Environment: Expect a dynamic industrial setting with exposure to: Electrical equipment near water sources Industrial chemicals and cleaning solvents High temperatures, airborne particles, and mechanical components Loud noise levels (85-115 dB range) Occasional fumes requiring open-air ventilation We provide comprehensive training and safety protocols to ensure your success and protection. What We Offer Our benefits package includes coverage of your health, wealth, and wellness for you and your eligible spouse/dependents. We offer a competitive salary and benefits package, including a 401k with company match and generous paid time off to help you balance your life. Below is a list of benefits you will enjoy while working with our company. - Three comprehensive Medical plan options Prescription Dental Vision - Company Paid Life Insurance - Voluntary Life Insurance - Supplemental Hospital Indemnity, Critical Illness, and Accident Insurance - Company-paid Short-Term Disability - Company-paid Long-Term Disability - Paid time off (PTO) and paid Holidays - 401k retirement plan with company match - Employee Assistance Program - Teladoc - Legal Insurance - Identity Theft Protection - Pet Insurance - Team Member Discount Program - Tuition Reimbursement - Yearly Wellness Clinic MITER Brands, also known as MI Windows and Doors, Milgard and PGT Industries are an equal-opportunity employer. The company does not discriminate based on religion, race, creed, color, national origin, sex, age, disability, handicap, veteran status, sexual orientation, genetic information, or any other applicable legally protected category.

Production Worker I - Grave Shift Schedule: Monday-Friday, 10:00 PM-6:30 AM Starting Pay: $22 HRLY and $2 Shift Differential Responsibilities: Ensure the following commitments are met and improved upon: On-Time Delivery, Quality, Units per Man Hour, Safety, Housekeeping, and Scrap. Support the fiberglass lineal production processes with accuracy and efficiency with use of standard work instructions. Focus on quality and timely delivery of completed tasks to achieve customer satisfaction. Demonstrate Milgard's Core Values in all business interactions. Adhere to all facets of safety policies and procedures, including wearing required Personal Protective Equipment. Qualifications: One year of similar work experience (Manufacturing and/or Warehouse, Fiberglass, Painting) preferred Mechanical aptitude including ability to read a tape measure Experience with hand and power tools Compute basic math problems to include fractions, addition/subtraction Ability to lift 75 pounds unassisted What We Offer Our benefits package includes coverage of your health, wealth, and wellness for you and your eligible spouse/dependents. We offer a competitive salary and benefits package, including a 401k with company match and generous paid time off to help you balance your life. Below is a list of benefits you will enjoy while working with our company. - Three comprehensive Medical plan options Prescription Dental Vision - Company Paid Life Insurance - Voluntary Life Insurance - Supplemental Hospital Indemnity, Critical Illness, and Accident Insurance - Company-paid Short-Term Disability - Company-paid Long-Term Disability - Paid time off (PTO) and paid Holidays - 401k retirement plan with company match - Employee Assistance Program - Teladoc - Legal Insurance - Identity Theft Protection - Pet Insurance - Team Member Discount Program - Tuition Reimbursement - Yearly Wellness Clinic MITER Brands, also known as MI Windows and Doors, Milgard and PGT Industries are an equal-opportunity employer. The company does not discriminate based on religion, race, creed, color, national origin, sex, age, disability, handicap, veteran status, sexual orientation, genetic information, or any other applicable legally protected category.

Responsible for performing a variety of manual and/or repetitive tasks to humanely transfer live turkeys onto the processing line. At Butterball, we exist to help people pass love on. As the most recognized name in turkey, the brand represents more than 60 years of cherished memories, providing quality, great tasting products that make meals something to celebrate every day. We proudly believe that life at Butterball means having a team who supports you, having the opportunity to grow personally and professionally, and making an impact on the health of others daily. Whether you choose to work at one of our five (5) manufacturing facilities in NC, AR, MO, farms in AR, NC, and KS, corporate office in NC, IL, or in the field, we believe we have an opportunity for everyone to succeed. At Butterball, we believe in fostering a culture where every team member is valued, has the opportunity to grow professionally and contribute to our success. Join us in our Purpose and apply for an opportunity today! Key Responsibilities •Transfer live birds from holding zone onto shackles on a processing line. •Perform repetitive tasks without the assistance of tools. •Adhere strictly to animal care and wellbeing, safety, and food safety standards and requirements. •Follows all GMP and HACCP procedures that relate to product safety with the facility. •Supports all Food Safety initiatives. Minimum Qualifications (Educations & Experience) ·High School Diploma or related preferred ·Entry level does not require previous experience in a Production role Essential Knowledge, Skills, and Abilities •Self-directed with the ability to work independently as well as with groups. •Ability to effectively plan, organize and prioritize work. •Ability to train, maintain and promote a safe work environment. •Read and understand HACCP along with FDA and OSHA requirements as needed. Preferred Knowledge, Skills, and Abilities •Previous experience working in a food manufacturing environment Physical Demands While performing the duties of this job, the employee may be regularly required to stand, sit, talk, hear, reach, stoop, kneel, and use hands and fingers to operate a computer, telephone, keyboard, and occasionally lift up to 60 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, color vision and the ability to adjust focus. Working Conditions & Travel Requirements •Work is performed in a food processing plant with a high noise level, storage coolers/facilities. •Position requires working around processing plant equipment. •Must be physically capable of working extended hours if needed and in a wet environment, standing for long periods of time, and operating processing equipment. •This position requires the individual to wear and work in personal protective equipment while in the manufacturing environment. •The noise level of the office environment is usually moderate; the noise level in the manufacturing environment may exceed 85 DBA and require hearing protection. Disclaimer We embrace equal opportunity employment. Butterball is committed to the fair and impartial treatment of all employees and applicants for employment without regard to gender, age, race, religion, color, national origin, physical or mental disability, military/veteran status, sexual orientation, gender identity and expression, genetic information, marital status, parental status, pregnancy, or any other status protected by law. This position is deemed Safety Sensitive for purposes of Butterball's Drug/Alcohol Screening & Testing Policy. Details will be provided to individuals who receive a conditional job offer, or upon request. The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of what is required of personnel so classified. Furthermore, they do not imply or establish a contract for employment and are subject to change at the discretion of the employer.

Responsible for performing a variety of manual and/or repetitive tasks to humanely transfer live turkeys onto the processing line. At Butterball, we exist to help people pass love on. As the most recognized name in turkey, the brand represents more than 60 years of cherished memories, providing quality, great tasting products that make meals something to celebrate every day. We proudly believe that life at Butterball means having a team who supports you, having the opportunity to grow personally and professionally, and making an impact on the health of others daily. Whether you choose to work at one of our five (5) manufacturing facilities in NC, AR, MO, farms in AR, NC, and KS, corporate office in NC, IL, or in the field, we believe we have an opportunity for everyone to succeed. At Butterball, we believe in fostering a culture where every team member is valued, has the opportunity to grow professionally and contribute to our success. Join us in our Purpose and apply for an opportunity today! Key Responsibilities -Transfer live birds from holding zone onto shackles on a processing line. -Perform repetitive tasks without the assistance of tools. -Adhere strictly to animal care and wellbeing, safety, and food safety standards and requirements. -Follows all GMP and HACCP procedures that relate to product safety with the facility. -Supports all Food Safety initiatives. Minimum Qualifications (Educations & Experience) ·High School Diploma or related preferred ·Entry level does not require previous experience in a Production role Essential Knowledge, Skills, and Abilities -Self-directed with the ability to work independently as well as with groups. -Ability to effectively plan, organize and prioritize work. -Ability to train, maintain and promote a safe work environment. -Read and understand HACCP along with FDA and OSHA requirements as needed. Preferred Knowledge, Skills, and Abilities -Previous experience working in a food manufacturing environment Physical Demands While performing the duties of this job, the employee may be regularly required to stand, sit, talk, hear, reach, stoop, kneel, and use hands and fingers to operate a computer, telephone, keyboard, and occasionally lift up to 60 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, color vision and the ability to adjust focus. Working Conditions & Travel Requirements -Work is performed in a food processing plant with a high noise level, storage coolers/facilities. -Position requires working around processing plant equipment. -Must be physically capable of working extended hours if needed and in a wet environment, standing for long periods of time, and operating processing equipment. -This position requires the individual to wear and work in personal protective equipment while in the manufacturing environment. -The noise level of the office environment is usually moderate; the noise level in the manufacturing environment may exceed 85 DBA and require hearing protection. Disclaimer We embrace equal opportunity employment. Butterball is committed to the fair and impartial treatment of all employees and applicants for employment without regard to gender, age, race, religion, color, national origin, physical or mental disability, military/veteran status, sexual orientation, gender identity and expression, genetic information, marital status, parental status, pregnancy, or any other status protected by law. This position is deemed Safety Sensitive for purposes of Butterball's Drug/Alcohol Screening & Testing Policy. Details will be provided to individuals who receive a conditional job offer, or upon request. The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of what is required of personnel so classified. Furthermore, they do not imply or establish a contract for employment and are subject to change at the discretion of the employer.

Responsible for performing a variety of manual and/or repetitive tasks to humanely transfer live turkeys onto the processing line. At Butterball, we exist to help people pass love on. As the most recognized name in turkey, the brand represents more than 60 years of cherished memories, providing quality, great tasting products that make meals something to celebrate every day. We proudly believe that life at Butterball means having a team who supports you, having the opportunity to grow personally and professionally, and making an impact on the health of others daily. Whether you choose to work at one of our five (5) manufacturing facilities in NC, AR, MO, farms in AR, NC, and KS, corporate office in NC, IL, or in the field, we believe we have an opportunity for everyone to succeed. At Butterball, we believe in fostering a culture where every team member is valued, has the opportunity to grow professionally and contribute to our success. Join us in our Purpose and apply for an opportunity today! Key Responsibilities •Transfer live birds from holding zone onto shackles on a processing line. •Perform repetitive tasks without the assistance of tools. •Adhere strictly to animal care and wellbeing, safety, and food safety standards and requirements. •Follows all GMP and HACCP procedures that relate to product safety with the facility. •Supports all Food Safety initiatives. Minimum Qualifications (Educations & Experience) ·High School Diploma or related preferred ·Entry level does not require previous experience in a Production role Essential Knowledge, Skills, and Abilities •Self-directed with the ability to work independently as well as with groups. •Ability to effectively plan, organize and prioritize work. •Ability to train, maintain and promote a safe work environment. •Read and understand HACCP along with FDA and OSHA requirements as needed. Preferred Knowledge, Skills, and Abilities •Previous experience working in a food manufacturing environment Physical Demands While performing the duties of this job, the employee may be regularly required to stand, sit, talk, hear, reach, stoop, kneel, and use hands and fingers to operate a computer, telephone, keyboard, and occasionally lift up to 60 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, color vision and the ability to adjust focus. Working Conditions & Travel Requirements •Work is performed in a food processing plant with a high noise level, storage coolers/facilities. •Position requires working around processing plant equipment. •Must be physically capable of working extended hours if needed and in a wet environment, standing for long periods of time, and operating processing equipment. •This position requires the individual to wear and work in personal protective equipment while in the manufacturing environment. •The noise level of the office environment is usually moderate; the noise level in the manufacturing environment may exceed 85 DBA and require hearing protection. Disclaimer We embrace equal opportunity employment. Butterball is committed to the fair and impartial treatment of all employees and applicants for employment without regard to gender, age, race, religion, color, national origin, physical or mental disability, military/veteran status, sexual orientation, gender identity and expression, genetic information, marital status, parental status, pregnancy, or any other status protected by law. This position is deemed Safety Sensitive for purposes of Butterball's Drug/Alcohol Screening & Testing Policy. Details will be provided to individuals who receive a conditional job offer, or upon request. The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of what is required of personnel so classified. Furthermore, they do not imply or establish a contract for employment and are subject to change at the discretion of the employer.

A leading beauty retailer is seeking a Production Manager to oversee physical marketing deliverables in a hybrid environment. This role involves leading the production lifecycle, managing timelines, and coordinating with internal and external stakeholders to deliver high-quality marketing materials. The ideal candidate will have over 4 years of experience in production management and a Bachelor's degree in a related field. Competitive salary and benefits, including discounts on products, are offered. #J-18808-Ljbffr

Be the force behind flawless execution. Xylem: Production Supervisor, you'll drive accuracy, efficiency, and continuous improvement across the production line. Vertical Turbine Pumps and Accessories The Production Supervisor drives high-impact planning and scheduling initiatives across complex operations. This role crafts advanced production schedules, conducts deep-dive capacity analyses, and engineers strategies to boost efficiency and throughput. Partnering with cross-functional teams, the planner tackles planning challenges head-on, implements corrective and preventive actions, and ensures full regulatory compliance. Beyond execution, this role mentors junior planners and delivers expert guidance to fuel continuous improvement. Qualifications: A bachelor's degree in Business Administration 3-5 years Production Experience Excellent organizational and time management skills. Strong analytical and problem-solving abilities. Effective communication and interpersonal skills. Proficiency in inventory management software and systems. Xylem does not provide visa sponsorship for this position The estimated salary range for this position is $80,000.00 - $110,000.00 Annual Starting pay is dependent on multiple factors, such as skills, experience and work location, and is not typically at the top of the range. At Xylem we offer a competitive compensation package with a generous benefit package, including Medical, Dental, Vision plans, 401(k) with company contribution, paid time off, paid parental leave and tuition reimbursement.

WireCo is the strength behind the world's evolution, through deep legacy and forward thinking, we create premium ropes that inspire innovation without limits. Our global footprint includes manufacturing plants, distribution facilities, and research and development centers around the world. WireCo offers a competitive wage, incentive programs, growth opportunities, and excellent benefits offerings for employees and their families. Benefits include paid time off, paid holidays, medical, dental and vision insurance, 401(k) retirement plan with generous company match, 100% company-paid life insurance, and 100% company-paid disability insurance. For more information, check out our website at*************** Job Description The Production Operator is responsible for setting up, loading and operating production machines, and making necessary adjustments to ensure the quality of the product meets required specifications. The Production Operator may work in one of three areas - Spooling, Stranding or Closing, and is responsible for his/her own safety and the safety of those around the machines. The Production Operator works under the direct supervision of a Production Supervisor and the technical oversight of the Process Engineering and Quality department. Duties & Responsibilities Record set-up information at the start of each order. Remove empty bobbins from the previously completed order and load full bundles of wire or bobbins using appropriate lifting devices. Weld or knot new wire new supply to trailing end of previous order (if applicable). Thread machine by pulling wire or strands through guides, tension rollers, and/or stranding or pre-forming heads. Secure, install and adjust the proper dies, stranding/pre-forming head, crushing rollers, post-former and carboloy rings as required by the order. Set the proper lay according to order specifications. Adjust tension and die pressure at the beginning of the order and as required throughout the entire order. Start lube pump as required by the order. Inspect and replace tensioning devices as needed. Inspect the set-change, including cutting a strand for helix-height measurement before requesting approval from the production supervisor. Properly tag product, stage in proper storage area, and record all production. Maintain a safe and clean working environment. Perform all job duties in accordance with work instructions and quality standards. Monthly Incentives - (opportunity to earnafter probationarytraining period) Other duties as assigned by management. Qualifications Required Qualifications Must be able to work this schedule: Friday, Saturday and Sunday from 5am to 5pm (Weekend Shift). May need to train on our Day Shift for 3-4 weeks (M-TH 5am-3pm). Fluent in English Basic computer skills Possess math skills and mechanical aptitude. Must have the ability to learn to use and read micrometers, tape measure, feeler gauge, and basic hand tools. Must be able to stand/walk on concrete floors for 10-12 hour shifts. Must be able to push/pull, and lift up to 50 lbs. Must be able to work in extreme environmental conditions with temperatures ranging from 40-100+ degrees Fahrenheit. Preferred Qualifications High School Diploma or GED Equivalent Previous manufacturing experience that includes the use of measuring devices and the use of basic math and mechanical skills. Additional Information Materials and Equipment Directly Used Strand and Wire rope of various diameters and lengths, on reels or in coils, empty or unassembled reels, paper lagging strips, tags, seizing wire, blocking, thimbles. Rewinding machines, stanchions, shafts, collars, bushings, rope cutters, measuring devise, fork trucks, banding equipment, welders, various hand tools. Personal protective equipment, including safety glasses, hearing protection, gloves, and steel-toed safety shoes. Additional information Must be legally authorized to work in the United States without restriction. An applicant must complete a satisfactory background check post-offer of employment. A criminal conviction will not be an automatic bar to employment. Must be willing and able to pass a post-offer drug screen and physical (if required) Must be 18 years of age or older. Equal Opportunity Employer/Veterans/Disability

Responsible for manufacturing products using efficient manufacturing processes through the supervision of production team members while ensuring the safety of our people, workplace and environment and meeting all company, legal and other requirements. Responsibilities Staff, train, evaluate and develop team members. Manage line efficiencies, key performance indicators, and downtime. Manage within labor and OPEX budget. Monitors the production process, makes periodic checks, and adjusts equipment or work practices according to standard operating procedures. Ensure equipment in the area assigned is in working order and that working conditions are safe at all times. Verify the readiness of the production line at start-up and supervise changeovers. Manage overall package and product quality to ensure all standards and specifications. Bending, kneeling, lifting of 50+ pounds and climbing. Qualifications High school diploma or GED required. Bachelor's degree preferred. 1-3 years production/manufacturing experience. Requires experience managing people/budgets. 2+ years supervising production staff preferred. Basic computer and database application skills. Familiarity with manufacturing systems. Forklift certification is a plus.

We have an exciting opportunities for a 2nd Shift and 3rd Shift Production Supervisors will lead and coordinate all manufacturing activities, including cleaning, preparation, filling, processing, and packaging of fresh food products. This role requires strong leadership skills to ensure safety, quality, and efficiency in a fast-paced environment. The ideal candidate will have food manufacturing experience and excel at motivating teams to meet and exceed production goals. Bilingual proficiency in Spanish and English is required. Schedule: 1:30 pm - 10:30 pm (1st open position) and 9:30pm to 6:30am (2nd open position) Location: On-site in Downer's Grove Pay: $24-32/hr, depending on experience & skillset, plus differential Responsibilities Safety & Compliance: Maintain a safe work environment and ensure compliance with food safety and sanitation standards. Production Oversight: Direct daily operations to meet production targets within specified timeframes. Team Management: Supervise, train, and motivate a team of 5+ direct reports, fostering a collaborative work environment. Process Management: Oversee the flow of materials and processes, conducting inspections to ensure efficiency and quality. Record Keeping: Complete and submit required reports and documentation at the end of each shift. Cross-Department Collaboration: Work closely with departments including engineering, operations, safety, quality assurance, logistics, and finance. Qualifications Experience: 3+ years leadereship in food manufacturing required. Leadership: Strong communication and people management skills. Language Skills: Bilingual in Spanish and English (speaking, reading, and writing) is required. Certifications: Food Handlers Certificate required; forklift certification preferred. Technical Skills: Basic computer proficiency; experience with data analysis and Lean Six Sigma preferred. Physical Requirements: Ability to lift/move up to 25 lbs. Ability to stand for long periods and bend or stoop as needed. Must wear Personal Protective Equipment (PPE). Benefits We offer competitive pay and a comprehensive benefits package, including: Medical, Dental, and Vision coverage Voluntary STD, LTD, and Life Insurance Employee Assistance Program (EAP) Holiday pay A culture of trust and growth opportunities About Us At The Fresh Factory, we've built a platform to accelerate the growth of emerging food and beverage brands. We are vertically integrated from the farm to the shelf, providing more than traditional manufacturing and serving as a trusted growth partner for leading brands. Join us and shape the future of fresh food production! We are committed to creating a diverse and inclusive workplace. We do not discriminate in hiring or employment on the basis of race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other legally protected status. This job description may be adjusted based on changing business needs. Job Type: Full-time Benefits: 401(k) Dental insurance Health insurance Paid time off Safety equipment provided Vision insurance Experience: manufacturing leadership: 1 year (Preferred) Language: Spanish (Preferred)

Production Supervisor - Kitchen, Second Shift Join our vibrant team at Charms, LLC - a subsidiary of Tootsie Roll Industries. As an industry leader and innovator of the confectionery world, we proudly craft legendary treats like Charms Blow Pops, Tootsie Mini Pops, Caramel Apple Pops, and many more in our Covington, Tennessee facility. Currently, we are seeking an experienced and results-driven Kitchen Supervisor to lead our night shift kitchen operations. This role is critical to our manufacturing success, ensuring that ingredient preparation and kitchen processes support our production goals with the highest standards of quality, safety, and efficiency. Why Charms? At Charms, our products make life a little sweeter. However, we don't just produce candy; we also build careers, celebrate victories, and grow together. We believe that successful employees drive successful companies, and that each of our team members brings something unique and valuable to the table. Our track record of growth and excellence provides a strong foundation to build an exceptional career. Your journey with us isn't just a job; it's an opportunity to use your talents to shape the future of an iconic brand. Responsibilities: Supervise and coordinate kitchen staff during night shift operations to ensure timely achievement of production goals Monitor team performance, providing feedback, coaching, and on-the-job training to develop team capabilities Ensure strict compliance with GMPs, food safety regulations, allergen controls, and HACCP standards specific to ingredient handling and preparation Maintain a clean, safe, and organized kitchen environment that supports the production of safe, high-quality confectionery products Implement and monitor kitchen production schedules to meet demand while optimizing labor efficiency Conduct quality checks on ingredient preparation to prevent production disruptions and ensure product consistency Address operational issues promptly and escalate concerns to senior management as needed Collaborate with other teams across Production, Sanitation, Maintenance, and Quality Assurance to optimize workflows and resolve challenges Enforce company policies, procedures, and safety standards consistently across the team Maintain accurate shift records including attendance, production logs, safety incidents, and quality documentation Participate in facility inspections and ensure kitchen areas meet all third-party audit requirements Systematically evaluate departmental processes, staffing, equipment utilization, and work practices to identify constraints, waste, and performance gaps Lead continuous improvement initiatives by setting measurable targets, engaging employees in problem-solving, and sustaining gains through standard work, follow-up, and accountability. Qualifications: High school diploma or equivalent required; associate's or bachelor's degree preferred Minimum of 3-5 years of supervisory experience in a food manufacturing environment, preferably in kitchen operations Working knowledge of GMPs, HACCP, allergen management, and food safety regulations Demonstrated ability to lead, motivate, and develop hourly team members Strong leadership, decision-making, and problem-solving skills Excellent communication and interpersonal skills with ability to collaborate across departments Ability to work under pressure, manage competing priorities, and adapt to changing production needs Must be able to work night shift hours including overtime as required Proficiency with Microsoft Office (Excel, Word) and experience with ERP systems (Oracle, SAP, etc.) Forklift certification helpful but not required Must pass a post-offer physical, drug screen, and background check Compensation & Benefits: Charms, LLC offers competitive compensation, comprehensive benefits, and opportunities for professional growth within a dynamic and evolving manufacturing environment. Our benefits package includes: Medical, vision, and dental insurance Life insurance Employee assistance program 401(k) with company matching and profit sharing On-site health clinic Paid vacation Paid holidays and sick days Professional development support Ample opportunities for growth - your success is our success Our team looks forward to welcoming you to Charms. If you are a driven and reliable leader with food manufacturing experience looking to build a strong career in operations leadership, we encourage you to apply now.

WireCo is the strength behind the world's evolution, through deep legacy and forward thinking, we create premium ropes that inspire innovation without limits. WireCo is headquartered in Prairie Village, Kansas with manufacturing plants, distribution facilities and research and development centers worldwide. WireCo offers a competitive wage, incentive programs, growth opportunities, and excellent benefits offerings for employees and their families. Benefits include paid time off, paid holidays, medical, dental and vision insurance, 401(k) retirement plan with generous company match, 100% company-paid life insurance, and 100% company-paid disability insurance. For more information, check out our website at*************** Shift Availability: 2nd shift (2p - midnight) Tu - Fri Weekends (6a - 6p) Fri - Sun Job Description The primary focus of a Production Operator is to fabricate assemblies while following all WireCo policies, procedures, and work instructions. The position also includes reading blue prints, using tape measures and other measuring devices to calculate the cut length of rope lengths to meet the customer requirement. There may be other duties that are work-related tasks as assigned by management. The Production Operator must exhibit the behaviors of the WireCo Business System (WBS): Teamwork - welcomes an environment of inclusiveness and healthy debate that reflects our team's strength Accountable - celebrates our successes, learn from failures, avoid excuses, and own the outcomes of our efforts Self-Aware - demonstrates an understanding of our strengths and needs, considering how our actions impact others Noble Intent - acts in the interests of others, approaching our work with integrity to ensure the best outcome Determined - takes initiative, share ideas and find solutions to win and achieve our goals Transparent - promotes open and honest communication and constructive feedback for clarity and truth Curious - seeks knowledge and outside input to test our way of thinking, challenging the status quo Duties & Responsibilities Time Entry Accuracy of product per customer specification Operating presses, stamping machines, and other machines Following specifications and standards in an ISO 9001work environment Supervisory Responsibility None Shift Availability: 2nd shift (2p - midnight) Tuesday - Friday Weekends (6a - 6p) Friday - Sunday Qualifications Required Qualifications Fluent in English Basic computer skills Possess math skills and mechanical aptitude. Must have the ability to learn to use and read micrometers, tape measure, feeler gauge, and basic hand tools. Must be able to stand/walk on concrete floors for 10-12 hour shifts. Must be able to push/pull, and lift up to 50 lbs. Must be able to work in extreme environmental conditions with temperatures ranging from 40-100+ degrees Fahrenheit. Production Operators must possess the ability to learn all processes and show competency A high school diploma or GED Materials and Equipment Directly Used Standard office equipment including, but not limited to: computer, mouse, keyboard, telephone, fax, calculator, multifunction copier Personal protective equipment, including safety glasses, hearing protection, gloves, and steel-toed safety shoes All production equipment including, but not limited to cut track, swager, press, coiler, tow motor, hoist, and fork truck All measuring devices, which would include, but not limited to: ring gages, hardness tester, tape measure, micrometers, dial calipers, proof loaders, etc. Additional Information Must be legally authorized to work in the United States without restriction. An applicant must complete a satisfactory background check post-offer of employment. A criminal conviction will not be an automatic bar to employment. Must be willing and able to pass a post-offer drug screen and physical (if required) Must be 18 years of age or older. Equal Opportunity Employer/Veterans/Disability Videos To Watch************************************************************

Stevens Industries is looking for skilled CNC Machine Operators to cut, band, and drill cabinet parts for production. A machine operator needs to possess attention to detail and a willingness to learn. On-the-job training is vital to the success ofa machine operator and allows for the potential to become a senior operator. Being a team player is essential since all tasks require close collaboration with co-workers. Ability to troubleshoot the machine to maintain efficiency and quality of product is important. RESPONSIBILITIES: 1. Set up machine for production 2. Adjust and control machine speed setting 3. Feed raw material or parts into semi-automated machines 4. Ensure parts are correct compared to drawing and make corrections/adjustments as needed 5. Check for any mistakes or flaws in parts 6. Maintain records of units produced 7. Keep production flowing by ensuring parts are complete 8. Ability to be a good team member and contribute to a team environment. Requirements 1. Preferred machine operating experience 2. Ability to read blueprint and computer programs 3. Skill in operating CNC machinery and tooling as well as precision measurement tools 4. Ability to read and interpret mechanical documents and drawings 5. Mechanical aptitude and good math skills 6. A keen eye for detail and results-driven approach 7. Good communication abilities BENEFITS: • Highly competitive salary and bonus structure • On-Demand Pay - Access your earned pay prior to payday • 100% Company-Paid Employee Health Insurance, Life Insurance, & Disability Insurance • Competitive Paid Time Off Plan plus 9 Paid Holidays • 200% Company 401(K) Match • Annual Profit-Sharing Bonuses • Company Stock Options • Dental & Vision Insurance • Health Savings Account with Company match • On-site Childcare for Employees' Children and Grandchildren • Educational Assistance Plan • Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Recognized as one of the fastest growing furniture and cabinet manufacturers in the United States, Stevens Industries, Inc. is a world-class manufacturer of wood and laminated products. We're dedicated to innovation, technological advancement, and beauty in functionality. Founded in 1956 and 100% employee owned, we credit our achievements to a focused path and our talented, passionate employee owners. Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. The pay range provided represents the expected compensation for this position. Actual pay will be determined based on factors such as experience, skills, and qualifications, while maintaining fairness with internal pay structures. We ensure compliance with all applicable wage and hour laws, including those related to minimum pay requirements. Salary Description $20-$27.50 per hour (includes shift differential)

Coordinates the effective use of equipment, facilities, team members and skill sets in order to meet all safety, quality, delivery and cost requirements for a group of departments and/or multiple shifts. Job Responsibilities Develops, trains and motivates team members to achieve desired safety, efficiency, proficiency, cooperation and morale; maintains awareness of plant and/or engineering policies and procedures and ensures employee adherence; may recommend and/or implement new plant policies and procedures Analyzes potential production problems (delays, material shortages, equipment repairs, etc.) and devises and implements procedures to minimize lost time due to these occurrences Reviews operational schedules, coordinates production/testing activities, and manages team member assignments; may manage for multiple departments and/or shifts Assists with tasks such as monitoring and determining manufacturing costs and outlay, quality and quantity of goods produced, production methods, tooling applications and ensures the effective use of production hours, skills, machines, equipment and facilities Interacts with engineers to modify machines, equipment and/or processes to improve safety, production and overall quality; provides liaison support between plant and engineering to ensure efficient manufacturing processes Uses data to estimate work-hour requirements and departmental efficiencies for continuous improvement projects. Recommends and initiates projects; sees those projects through to deadline with measurable improvements Manages costs and budgets and provide corrective action plans to improve budgetary control Inspects materials and finished product for quality compliance as required Perform full range of managerial responsibilities which may include but not be limited to: interviewing, hiring, coaching and developing employees; planning, assigning and directing work; EEO/AA; performance management; department budget Perform other duties as assigned Job Skills Requirements Knowledge of manufacturing equipment, procedures and production/quality standards Demonstrated ability to work with multiple internal departments to ensure on-time delivery of quality product May require in-depth ability to read, interpret and explain blueprints, engineering drawings, job orders and specifications based on location Strong interpersonal and communication skills to interact with and motivate a diverse group of employees Advanced ability to solve practical problems and deal with a variety of personnel and production problems Strong computer skills and familiarity with office productivity software and business control software such as SAP Ability to work in a busy, fast-paced production environment, often under time constraints Fluent in English and primary language used in area of responsibility and/or location Education High School diploma General Education Degree Experience Requirements Minimum of three years of experience in a manufacturing environment including previous experience managing personnel in a production environment with High school diploma Minimum of one year of experience in a manufacturing environment with Bachelor's degree Experience working in multiple departments preferred Experience with continuous improvement methods and teams, or cost reduction initiatives showing tangible results Physical & Environmental Requirements Briggs & Stratton, headquartered in Milwaukee, Wisconsin, provides innovative products and diverse power solutions to help people get work done. Briggs & Stratton is the world's largest producer of engines for outdoor power equipment, and is a leading designer, manufacturer and marketer of lithium-ion battery, standby generator, energy storage system, lawn and garden, turf care and job site products through its Briggs & Stratton , Vanguard , Ferris , Simplicity , Snapper , Billy Goat , Allmand , SimpliPhi , Branco and Victa brands. Briggs & Stratton products are designed, manufactured, marketed and serviced in more than 100 countries on six continents.

Benefits Available Day 1 - No Waiting Period! Taylor Corporation has big plans for the future and we need talented leaders to get us there. We power the world's leading brands - and our employees' careers - by unlocking potential everywhere we see it. If you love to lead, are open to new ideas and inspire the best in others, we should talk. We're passionate about our work, we believe there is always a better way, and we're looking for professionals like you. Want to be part of something powerful? It's time to look at Taylor. Your Opportunity: Corporate Graphics Commercial, a Taylor company, is looking for a Production Supervisor (1st Shift) to oversee day-to-day operations, ensure production goals are met, and support a high-performing team in a fast-paced manufacturing environment. Your Responsibilities: * Supervise daily production activities and provide direction to employees on the shift * Ensure production schedules are met while maintaining quality, accuracy, and safety standards * Assign work, monitor progress, and adjust priorities as needed * Train, coach, and develop team members; provide performance feedback * Support hiring decisions and participate in performance evaluations * Resolve production issues and coordinate with maintenance, scheduling, and other departments * Monitor equipment operation and escalate mechanical issues appropriately * Ensure all employees follow SOPs, safety procedures, and ISO quality requirements * Maintain accurate reports and documentation related to production, quality, and attendance * Foster a positive, team-oriented work environment with strong communication and accountability * Recommend and implement process improvements to increase efficiency and reduce waste You Must Have: * 2+ years of relevant manufacturing or production leadership experience * Strong problem-solving skills and the ability to make decisions independently * Solid communication skills and the ability to coach and motivate employees * Knowledge of production workflows, quality standards, and safety practices * Ability to prioritize tasks in a fast-paced environment and meet deadlines * Basic computer skills, including experience with email, production systems, Excel, and Microsoft Office We Would Also Prefer: * College degree or equivalent amount of experience preferred * Experience in a high-volume print, manufacturing, or production environment * Flexibility in responding to changing priorities The anticipated annual salary for this position is $60,000 - $70,000. The actual base offered depends on a variety of factors, which may include as applicable, the qualifications of the individual applicant for the position, years of relevant experience, specific and unique skills, level of education attained, certifications or other professional licenses held, and the location in which the applicant lives and/or from which they will be performing the job. The range listed is just one component of Taylor Corporation's total compensation and benefits package for employee. About Taylor: One of the largest print and communications firms in North America, Taylor's family of companies provides a diverse set of products, services and technologies that address the toughest business challenges. We work diligently each day to create printed and digital marketing communication solutions that help power many of the world's most recognizable brands. With more than 50 years of category expertise and 10,000 employees spanning dozens of U.S. states and multiple countries, Taylor serves businesses and distributors both large and small. Our employees enjoy a comprehensive benefit package including a choice of several health plans, dental, vision, wellness programs, life and disability coverage, flexible spending accounts, health savings accounts, a 401(k) plan with company match, paid time off (PTO) and 64 hours of annual holiday pay. The Employer retains the right to change or assign other duties to this position. Taylor Corporation is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Taylor Corporation including all partners and affiliates is an Equal Opportunity Employer/Veterans/Disabled.

Job Title Manufacturing Production Associate - Calhoun & Adairsville Plants Position OverviewShaw Industries is seeking dedicated and safety-conscious individuals to join our manufacturing and distribution teams at our Calhoun and Adairsville facilities. These roles are essential to maintaining efficient production and delivering high-quality products to our customers. Positions Available: + Lift Truck Operator - Operate forklifts and other material-handling equipment to move raw materials and finished goods safely. + Twisting Operator - Manage twisting machines to ensure yarn integrity and quality standards. + Heat Set Operator - Oversee heat-setting processes for yarn durability and performance. + Creeler - Load and monitor creels to maintain continuous production flow. + Creeler Mender Operator - Repair, maintain creels and mend rolls to minimize downtime and ensure quality standard products. Key Responsibilities: Depending on the assigned department and role, your duties may include: + Operate machinery and equipment according to safety and quality standards. + Monitor production processes and troubleshoot issues promptly. + Each role has different lifting, reach, and physical movement requirements. Typical requirements include the ability to bend, stoop, reach, pull, climb stairs and push repetitively. + Collaborate with team members to meet production goals and deadlines. + Adhere to all company safety policies and procedures. General + Follow all safety, attendance, and performance policies. + Participate in shift communication and team efforts to maintain workflow. + Work necessary overtime as required by production demands. + Perform additional duties as assigned by supervisors or team leads. Qualifications and Requirements: + Ability to bend, stoop, reach, pull, climb stairs and push repetitively. + Previous experience in a manufacturing environment is a plus. + Ability to lift up to 50 lbs and stand for extended periods of time. + Strong attention to detail and commitment to safety. + Ability to follow verbal and written instructions with minimal supervision. + Willingness to work in a fast-paced environment and adapt to changing priorities. Shaw benefits include: + Medical, dental, vision insurance + Life insurance and disability coverage + Tuition reimbursement + Employee assistance program + Health savings account + Paid time off + Parental leave + 401K and Retirement plans + Product discounts for employees + Adoption assistance + Shaw Family Health Center (Dalton, GA and Cartersville, GA locations) + And much more! #ShawIND Work Shift 8 Hr non-rotating shift, Hrs fall to out-punch day, Observed Calendar, shift starts PM Shaw Industries is an equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities.