Shearer's Foods jobs in Erie, PA

Troy Center is hiring an in-person MDS Coordinator in Troy, NY. Completing accurate assessments, MDS & care plans as assigned Initiating care plans and supporting activities as assigned Creating and distributing monthly care plan calendars in a timely fashion Maintaining & updating all care plans and assessments as required Monitoring & auditing clinical records, ensuring accuracy & timeliness Informing DON of persistent issues related to non-compliant documentation Protecting the confidentiality of Resident & Facility information at all times REQUIREMENTS: MUST HAVE PRIOR MDS 3.0 EXPERIENCE Valid New York RN License Long Term Care Experience Required! Must be highly organized, professional & motivated Should have solid computer skills Excellent communication skills Should be friendly and a team worker About us: Troy Center for Rehabilitation and Nursing is an 80-bed rehabilitation and skilled nursing facility located in the South Troy section of the city, minutes away from the eastern bank of the Hudson River. It's a homey, welcoming, well-maintained facility, providing a warm and nurturing environment. Our staff is committed to ensuring the highest quality of life for all our residents, helping each to get stronger, healthier, and happier. We want all residents to leave Troy Center with dignity and independence. Troy Center is a proud member of the Centers Health Care Consortium. Equal Opportunity Employer -M/F/D/V

Employment Status: Hourly Full-Time Function: Distribution/Logistics Pay Grade and Range: USXX - Grade USXX Hourly 37 ($36,103.41 - $67,049.19) Bonus Plan: OIP Target Bonus: 5.0 Hiring Manager: Brandi L Pratt Collins Recruiter: Nancy Laughlin Internal Candidate Eligibility Criteria: 1. Is a Lincoln Electric employee with at least 1 year of service 2. Is NOT on an active Performance Improvement Plan (PIP) Job Responsibilities Check-in / Material verification Enter receipts Material consolidation, FIFO material Stock material safely and correctly Transfer material in EPICOR May rotate into the Shipping or Receiving role, as required Supply material to all work areas in the factory Perform daily forklift Inspections Keep warehouse clean and well organized Job Requirements Strong organizational skills Computer skills Forklift and Bendi experience Strong attention to detail Be able to prioritize and work with a sense of urgency Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

At KARL STORZ, we are driven by a mission to enhance global health through innovative technology designed to tackle the most complex surgical procedures and medical challenges. One of the most rewarding ways to launch your career with us is by joining our Onsite Endoscopic Specialist (OES) team. In this role, you will be at the forefront of healthcare innovation, providing hands-on support for KARL STORZ advanced medical devices-ranging from hand instruments to state-of-the-art video equipment-within your assigned hospital. As an OES, you will collaborate closely with the Sterile Processing Departments and Operating Room teams, playing a critical role in ensuring the success of surgical procedures. This position is more than just a job-it is a gateway to an exciting and diverse career path. Whether you aspire to transition into medical device sales, advance into leadership, share your knowledge as an educator, or specialize in marketing, the opportunities for growth within KARL STORZ are limitless. With a commitment to internal development, we empower you to explore your passions, develop your skills, and propel your career to new heights. Join us and be part of a team dedicated to making a tangible impact on global health! Key Responsibilities: Face-to-face customer support, including OR, SPD and Biomed Video tower/system set-up and support Inspection, repair, troubleshooting and replacement of KARL STORZ devices Monitoring, reporting, and facilitating repair/ exchange transactions Transporting, cleaning/sterilization and packaging of instruments after use Trouble shoot video and instrument issues in the O.R. Instrument/equipment repair management Requirements: A minimum of high school diploma or equivalent Experience in Sterile Processing, Sales, or other Surgical Technology/Medical role Our successful candidate will have excellent written and spoken English language business communication skills. They will also have demonstrated success working in a collaborative, service-oriented team environment. Effective communicator, collaborative, and effective time management Possess exceptional organizational skills and the ability to multi-task MS Office - proficient user as the role will need to work with Excel spreadsheets and reporting Role requires the completion of a drug screening for safety-sensitive positions Must be able to lift/push/pull up to 25lbs Preferred Qualifications: Associate's Degree and/or CRCST certification Key attributes of an exceptional OES: Collaboration: Build strong, respectful relationships with team members, fostering an inclusive work environment and driving process improvements. Critical Thinking & Problem Solving: Analyze situations to understand the "why" and "how," delivering solutions with professionalism. Communication: Engage in clear, concise interactions with customers and colleagues, effectively conveying ideas and information. Customer Service: Create an environment where customers feel valued, respected, and understood, building lasting business relationships. Technical Proficiency: Utilize email, calendars, virtual collaboration tools, and spreadsheets to manage tasks, analyze data, and support business decisions. What is in it for you: Relocation Support: Enjoy generous relocation reimbursement packages to ease your transition. Professional Growth & Development: Receive financial support to obtain industry certifications (e.g., CST, CRCST). Get reimbursed for certification exam fees and study materials. Take advantage of ongoing training and educational opportunities to advance your career. Collaborative & Dynamic Work Environment: Engage in cross-functional collaboration and knowledge sharing. Benefit from regular feedback, recognition, and support for your growth and development. Be part of a team that celebrates successes together. Access to Cutting-Edge Medical Technologies: Work with state-of-the-art medical equipment. Collaborate with leading medical professionals. Contribute to innovative solutions that improve patient care. Who we are: KARL STORZ is an independent, family-owned company headquartered in Germany's renowned MedTech manufacturing region. For 80 years, we've pioneered the most groundbreaking innovations in endoscopic surgery, video imaging, and OR integration to benefit patients and healthcare providers alike. With more than 9,000 associates worldwide and 2,600 in the US, we pride ourselves on harnessing cutting-edge technology, precise workmanship, and unrivaled customer support to help healthcare facilities succeed. With onsite locations and field opportunities across the country, we attract a diverse and talented staff. It's not just about the tools we create-it's about the lives we change, together.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: ($68,300.00 - $109,300.00) Target Bonus: % Req ID: 27257 What You Will Do As an Electrical Engineer, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Engineer solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Develop, design, and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and maintain National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education and Experience Requirements This position is posted as a range, candidates with varying levels of experience and qualifications are encouraged to apply. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Minimum requirements, Engineer II - Bachelor's degree in electrical engineering with 3+ years of professional relevant engineering experience. Experienced Professional - Has working knowledge and experience in own discipline Continues to build knowledge of the organization, processes and customers Performs a range of mainly straightforward assignments Uses prescribed guidelines or policies to analyze and resolve problems Receives a moderate level of guidance and direction Engineer III - bachelor's degree in electrical engineering with 5+ years of professional relevant engineering experience Senior "Go To" / Career Level Person - Has in-depth knowledge in own discipline and basic knowledge of related disciplines Solves complex problems; takes a new perspective on existing solutions Works independently; receives minimal guidance May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives Acts as a resource for colleagues with less experience May represent the level at which career may stabilize for many years Engineer IV - bachelor's degree in electrical engineering with 8+ years of professional relevant engineering experience. Lead/Specialist - Is recognized as an expert in own area within the organization Has specialized depth and/or breadth of expertise in own discipline or function Interprets internal or external issues and recommends solutions/best practices Solves complex problems; takes a broad perspective to identify solutions May lead functional teams or projects Works independently, with guidance in only the most complex situations Experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Responsibilities: Perform sales support to consistently meet overall area sales goals. Make regular sales calls on existing major accounts and establish contact with new accounts. Make effective customer presentations, proposal pricing is accurate and technically correct. This may include walk-through customer site, and field visits. Perform marketing support to promote the Company's image throughout the industry. Implement area-marketing plan on a monthly basis. Assist Corporate needs in new service assessments, marketing research and literature development. Perform public relations to promote sales. Active participation in trade shows and professional societies. Give effective presentations for the Company's Training Services and Speaker's Bureau. Member of the Area Management Committee. Actively participate as a committee member. Assist in the development of the area sales and marketing plan. Bring input and new ideas on Sales and Marketing activities. Competencies: To perform the job successfully, an individual should demonstrate the following competencies: Customer Focus- Is dedicated to meeting the expectations and requirements of internal and external customer; Gets first-hand customer information and uses it for improvements in products and services; Acts with customers in mind; Establishes and maintains effective relationships with customers and gains their trust and respect. Drive for Results- Can be counted on to exceed goals successfully; is constantly and consistently one of the top performers; very bottom line oriented; steadfastly pushes self and others for results. Interpersonal Savvy - Relates well to all kinds of people, up, down and sideways, inside and outside the organization; builds appropriate rapport; listens; builds constructive and effective relationships; uses diplomacy and tact; truly values people; can diffuse tension. Listening- Practices attentive and active listening; has the patience to hear people out; can accurately restate the opinions of others even when he/she disagrees. Negotiating- Can negotiate skillfully in tough situations with both internal and external groups; can settle differences with minimum noise; can win concessions without damaging relationships; can be both direct and forceful as well as diplomatic; gains trust quickly. Time Management- Uses his/her time effectively and efficiently; sets priorities; values time; separates the critical few from the trivial many and concentrates his/her efforts accordingly. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements: Regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or controls; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear, and smell. Frequently required to sit, climb, and balance. Specific vision abilities required by this job include close vision, distance vision, basic color differentiation and the ability to adjust focus. Regularly lift and/or move up to 25 pounds and frequently lift and/or move 100-pound test sets. Valid Driver's License. Education/Experience: Graduate engineer (BSEE/BSME) and no experience. OR Graduate of electrical technical school or equivalent, and five years of similar work. OR High school diploma or equivalent and eight years of similar work. Willing to work flexible hours, weekends, some overnight travel to cover sales territory. Regularly required to sit, stand, walk, use hands and fingers, talk and hear. Required to sit and work at computer. Specific vision abilities required by this job include close vision and the ability to adjust focus. Conduct walk-through of construction sites and work in and around electrical equipment. Valid Driver's License required. TRAVEL TIME REQUIRED Up to 75% within assigned territory Company provided vehicle The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $6.9 billion in revenue, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #HVM #LI-HR1

The Sr. Technical Thermal Sales Engineer, Global Strategic Accounts (GSA) drives the sales of thermal management equipment by providing technical expertise and guidance. This position focuses on reviewing specifications, analyzing mechanical drawings, and collaborating closely with GSA Account Managers to help meet customer needs and drive business growth. RESPONSIBILITIES Review and respond to RFPs for Vertiv thermal management solutions, including specification analysis, mechanical drawing review, and assistance with initial equipment configurations. Support the development of concept thermal designs and provide technical input on product selection, sizing, and schematic layouts. Participate in virtual or in-person design reviews with customers and internal teams. Collaborate with cross-functional teams such as offering management, engineering, and sales to support product development and customer solutions. Prepare technical documentation and project-specific bid forms as needed. Contribute to account planning and customer engagement strategies by providing technical insights. Serve as the SME for Vertiv during customer visits and industry events as needed. Stay informed on industry trends, technologies, and materials to support continuous improvement and innovation. Provide feedback to product managers to help guide product enhancements and future development. Help to foster a culture of innovation and continuous improvement within the department. Provide training and mentorship to less experienced team members. MINIMUM QUALIFICATIONS Bachelor's degree in engineering, business, or related field of study (or equivalent combination of education and experience). 4-8 years of industry technical experience. Experience in leading/managing high profile projects. Technical knowledge of Vertiv's thermal management product portfolio. Deep market dynamics and industry knowledge. Proven track record of influencing engineering accounts. Experience working with sales offices. Salesmanship and self-confidence to deal with frequent, stressful customer relationship issues. Excellent sales presentation skills. Strong problem-solving skills and ability to translate technical challenges into actionable plans. PHYSICAL & ENVIRONMENTAL DEMANDS No special physical requirements. TIME TRAVEL REQUIRED 30-50% The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers. Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Mentor Employment Status: Hourly Full-Time Function: Maintenance Req ID: 26434 PURPOSE: Move, build, install, and demolish electrical panels, equipment, and power and network services. Primarily 1st shift schedule could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Construction Electrician A. Reports directly to the department Manager. JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES) Performs all tasks under general supervision. Provides training and assistance to less experienced Electricians. Build electrical panels and test panels for production equipment to print. Performs installations and demolition on buildings, mechanical equipment and utility systems using one or more trade skills (e.g., electrical, mechanical). Maintains current knowledge of all applicable procedures and safety measures. Installs and replaces electrical circuits, equipment and appliances, using hand tools and testing instruments, to supply electrical power for lighting, equipment, and machine operations. Provide power and control wiring for new equipment installations and equipment upgrades. Assist in commissioning of newly installed or upgraded equipment. Responsible for safely demolishing unused equipment and services. Oversee construction contract and service work as assigned. Order construction material as required. Assist with keeping neat and orderly records on work performed. Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. BASIC REQUIREMENTS Must have successfully completed an Electrician Apprentice Program, an Associate degree in Electronics/Electrical Technology or have equivalent job experience. Must pass the skilled trade assessment for this position. Must have a basic level of knowledge and experience reading wiring diagrams and engineering drawings. Must have a basic level of knowledge and experience in panel installation and wiring practices. Must have a basic level of knowledge and experience in proper conduit materials, methods, and installation. Must have a basic level of knowledge in the National Electrical Code (NEC) Ability to use various measuring devices (multi-meter, tape measure, levels, plumb bobs, etc.) Excellent attendance required. Must possess basic mechanical aptitude. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be able to distinguish colors used in color-coding wires and electronic components. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Bettendorf Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($21/hr - $31.25/hr) Target Bonus: 5.0% Req ID: 27686 Summary Lincoln Electric Automation is seeking a Quality Technician for our Bettendorf, IA location to perform in-process and final inspections, maintain quality standards, and support continuous improvement within a fast-paced automation environment. This role ensures that assemblies, weldments, and tooling meet engineering and customer requirements. In addition to competitive pay, Lincoln Electric offers an annual bonus program, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, paid time off and many more outstanding benefits! Responsibilities Perform in-process and final inspections on assemblies, weldments, and fabricated components. Maintain and calibrate inspection and measuring equipment. Identify and document nonconformities; assist in corrective actions. Work with engineering and fabrication teams to resolve quality issues. Provide feedback to improve workflow, documentation, and process efficiency. Complete inspection reports and quality documentation. Support assembly, fit-up, hydraulic line plumbing, and customer run-off. Assist with field start-up and customer training as needed (overnight travel required). Maintain a clean, safe, and organized work area. Required Education & Experience High school diploma or GED required; technical training preferred. Proficient in reading blueprints and GD&T. Strong attention to detail and organizational skills. Proficient with Microsoft Office (Excel, Word, PowerPoint). Experience with CMM systems (Leica, Faro Arm) and PolyWorks preferred. Knowledge of manufacturing equipment, inspection tools, and procedures. Ability to operate forklifts and overhead cranes safely. Effective communication and teamwork skills. Physical Demands and Work Environment The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is typically required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; bend; squat; climb; see, talk and hear. Be able to climb ladders; lift hand tools up to 40 lbs. consistently, and parts up to 50 lbs. consistently. Repetition with activity. Specific vision abilities required by the job include close vision, distance vision, depth perception and the ability to adjust focus. Work environment: The noise level in the work environment is usually moderate. Shift: Full time, Monday-Friday (7am-3:30pm), overtime as needed. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22821 Employment Status: Hourly Full-Time Function: Maintenance Req ID: 27095 Purpose Ability to machine, mill, and grind various types of metals. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Maintenance Machinist A. Reports directly to the department Manager. Job Responsibilities Performs all tasks under general supervision. Provides training and assistance to less experienced Machinists. Assumes ownership of work task and demonstrates initiative to get work completed. Creates and reworks machinery and equipment components according to requisition documentation, blueprints, or other drawings. Sets up equipment operation feed, speed and temperature. Follows established procedures for operating various conventional and/or CNC (computerized numerical control) manufacturing equipment for tasks such as cutting, punching, forming, drilling, tapping, turning, milling, grinding, and stamping to fabricate, form or shape manufactured parts, tools or parts assemblies from raw materials. Selects and measures raw materials and parts to specifications to prepare for production processing. Performs reworking and machining of new and spare production parts for departments. Repairs maintenance parts as needed. Verifies the accuracy of work by using calipers, micrometers, dial indicators, and various measuring instruments. Order and maintain project related material as required. Assist with keeping neat and orderly records on work performed and repairs made. Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager Basic Requirements Must pass the skilled trade assessment test for this position. Must have a basic knowledge and experience reading mechanical drawings. Must have a basic knowledge and experience in proper machining and grinding techniques (Feed rates, sequencing, cutting speeds). Must have a basic knowledge and experience in setting up machine tools to produce precision parts. Must have a basic knowledge and experience in writing and modifying machine programs. Must be able to use math to calculate dimensions and determine speeds and feed rates. Ability to use various measuring devices (calipers, micrometers, dial indicators, etc.) Excellent attendance required. Must possess basic mechanical aptitude. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Research & Development Req ID: 27300 Purpose To design, develop and evaluate welding machines and associated processes; to conduct applied research into new areas of welding machine design and/or on new welding processes. Job Duties and Responsibilities Utilizes and applies experience in a broad range of fields to understand weld machine development process and interactions between machine design and weld process development/optimization; collaborates with team members and members of the department, providing the benefit of this understanding to enhance the execution of projects Develops new welding machines, software, welding processes and/or test methodologies in accordance with company policies/procedures and in consideration of: Market needs, requiring direct interface with customers, sales and marketing Industry codes, standards, and specifications, and Manufacturing process capabilities, requiring direct interface with manufacturing and methods personnel Establishes standards and methodologies for and conducts evaluations of product performance Develops/refines test methods, as applicable, to support new product development, product evaluations, and competitive benchmarking Facilitates development of manufacturing process capabilities to support introduction of new products Works with minimal direct supervision, conferring with superiors as needed; has appreciable latitude for independent action or decision May provide task oriented direction to Technicians, Technologists and/or Engineers Level I/II/III in the execution of development projects Structures projects for and provides supervision and mentoring to Engineering Interns Maintains records of all work in process and documents interim/final results in the applicable format; these include Project Definitions, Milestone Plans, ES Reports, Technical Reports, Project Tracking Progress Reports and presentations at meetings, seminars, and conferences Basic Requirements Baccalaureate degree in Engineering (or equivalent). Degree in Welding Engineering preferred. Minimum 8 years engineering experience. Processes and applies a broad knowledge of engineering and scientific principles, practices and procedures, within the field of specialization, to the completion of difficult assignments. Computer literate with working knowledge of MS Word, MS Excel, MS Access and MS PowerPoint, as a minimum. Possesses and applies both practical and fundamental understanding of various arc welding processes. Experience with Robotic Programming. Experience with numerical modeling tools including Python is a plus. Excellent written and verbal communication skills. Works effectively in a cross-functional team environment Job Rate: Salary Grade ***The established grade and range for this job is listed above. All applicants should understand that, if selected for a posted job, the actual pay rate will generally fall within the range of the stated grade. Most typically, the pay rate will be set towards the lower end of the range and may vary slightly, depending upon candidate qualifications. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Dayton, VA Job Type: Full Time Shift(s) Available: 2nd Compensation: $20.65/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Marathon Health Clinic (Employer sponsored health center) Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities HACCP Checks Work closely with USDA Assist with department set ups Ensure all safety practices are being followed Responsible for reconditioning station Complete HACCP paperwork Work on production line as needed Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Ability to read/write/speak English Preferred Qualifications Previous Cargill experience Previous poultry experience Production experience Work history in the last 12 months Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement Equal Opportunity Employer, including Disability/Vet

Dreaming big is in our DNA. It's who we are as a company. It's our culture. It's our heritage. And more than ever, it's our future. A future where we're always looking forward. Always serving up new ways to meet life's moments. A future where we keep dreaming bigger. We look for people with passion, talent, and curiosity, and provide them with the teammates, resources and opportunities to unleash their full potential. The power we create together - when we combine your strengths with ours - is unstoppable. Are you ready to join a team that dreams as big as you do? SALARY: $55,000 - $60,000, bonus eligible LOCATION: Devils Backbone Brewing Company - Outpost Taproom SHIFT: Days, nights, weekends, and holidays are required. 8-12+ hour shifts. COMPANY: Michelob ULTRA. Cutwater Spirits. Budweiser. Kona Brewing Co. Stella Artois. Bud Light. That's right, over 100 of America's most loved brands, to be exact. But there's so much more to us than our top-notch portfolio of beers, seltzers, and more. We are powered by a 19,000-strong team that shares our passion to create a future with more cheers. We look for people with talent, curiosity, and commitment and provide the teammates, resources and opportunities to unleash their full potential. The power we create together - when we combine your strengths with ours - is unstoppable. Are you ready to join a team that dreams as big as you do? JOB SUMMARY: The Sous Chef will be responsible for personnel management, motivation, development and coaching, food safety and customer satisfaction. This position requires the ability to lead a large staff effectively and efficiently in a fast-paced restaurant/pub environment. The Sous Chef is the shift supervisor and solves problems that occur during the shift. This is a leadership position that encapsulates the broadness of the kitchen operation while maintaining a sense of order during high-volume operations. JOB RESPONSIBILITIES: Lead and manage all hourly BOH staff in running brewpub kitchen according to specific and strict quality and efficiency standards. Work closely with pubs management team to ensure BOH and FOH operations coordinate seamlessly. Must have basic knowledge of kitchen equipment and read, translate, and execute recipes as well as assist in menu development. Ability to perform all line cook and prep cook duties and step to assist during peak times. Ensure food and beverage quality by maintaining high levels of cleanliness, organization, storage and sanitation and maintain accurate inventory levels. Prepare daily specials for FOH managers and staff and notify when low or sold out. Assumes responsibility for the administrative tasks of running the kitchen (Scheduling, etc.). Assists in training of kitchen staff for growth and development. In the absence of the Executive Chef this position will lead shifts which include daily decision making, staff support, guest interaction, and staff cutting while ensuring standards, product quality and cleanliness. Implements proper quality control procedures guaranteeing standards. Assist in ensuring safe working and guest environment to reduce risk and injury. Report any incidents to the Executive Chef and HR immediately. Assist in making sure all staff is following company stated policies from the handbook including, but not limited to, cleanliness and hygiene, dress code and professional behavior. JOB QUALIFICATIONS: High school diploma or equivalent required; Associate degree or higher preferred. Minimum of 3-5 years significant restaurant kitchen experience. Excellent leadership skills with the proven track record to lead and empower team members. Must be proficient in all kitchen positions in the restaurant (line cook, prep cook, etc.). Expert-level knowledge of food and beverage industry including BOH operations. Excellent organizational and interpersonal skills with an ability to work in a team environment. Capable of handling personal responsibilities in a high-stress, fast-paced work environment. Aptitude to work with and troubleshoot equipment. Ability to lift and/or move up to 60lbs and stand for 8+ hours per shift. WHY ANHEUSER-BUSCH: At Anheuser-Busch, our purpose is to create a future with more cheers. For more than 165 years, we have delivered a legacy of brewing great-tasting, high-quality beers that have satisfied beer drinkers for generations. 99 percent of the products we sell in the U.S are made in the U.S. with more than $700 million in high-quality ingredients sourced from American farmers and more than $7 billion in goods and services purchased from U.S. suppliers, and we have invested nearly $2 billion in our 100 facilities across the country over the past five years. Through these investments, and as a leading American manufacturer and the nation's top brewer, we drive economic prosperity nationwide through investments in our people, facilities, and communities. We are the only brewer that invests in the U.S. at this scale. BENEFITS: Health benefits including Medical, Dental, Vision, Wellness and Tax-Advantaged Savings and Spending Accounts Life Insurance and Disability Income Protection Generous Parental Leave and FMLA policies 401(k) Retirement Savings options with a company matching contribution Chance to work in a fast-paced environment among a company of owners Free Beer! #AC-3

Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Planning Manager is responsible for overall site production operations. Creates a work environment which promotes safety, quality, delivery, and cost-effectiveness. Effectively develops teams that can achieve corporate improvement objectives. Accountable for all aspects of plant production performance while ensuring objectives are attained in a cost-effective manner. Drives best practices through the organization and leads process improvement. Why work at MCC: Comp: $85,000-100,000k/yr This is a Dayshift Position Generous benefits package including medical, dental, vision, disability, life insurance and 401(k) Paid Holidays: New Years, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating holidays Responsibilities: Directly, and through delegation, coordinates activities required to assure safety, quality, delivery, and cost meet specified targets. Assures the compliance of behavior-based safety initiatives and continuously improves safety performance. Executes quality control plans for compliance to standards and drives variation reduction within the process. Assesses on-time delivery performance and develops actions to improve and sustain high level of performance. Holds direct responsibility for managing cost by effective management of labor, overtime, and expenditures. Determine staffing requirements weekly and re-deploy resources during the week as needed to address any shifting staffing needs or changes in priorities and scheduling. Reviews and analyzes production reports to determine root causes of variance from budget, and develops and executes corrective actions, using structured root cause analysis, MDI and Policy Deployment methodologies. Using Lean principles, form teams and involve people to improve productivity, decrease lead times, reduce waste and attain customer quality requirements. Reviews and analyzes production reports to determine root causes of variance from budget and develops and executes corrective actions. Recommend and initiate cost reduction programs centered around capital improvements where ROI and pay back criteria are favorable. Promotes, prepares, and participates in kaizen activities. Sustains results. Facilitates the execution of daily Gemba walk by assuring the proper utilization of hour-by-hour, SQDC boards and War Room tools. In conjunction with Human Resource Manager, coordinates appropriate “required to operate” and “required on roles” staffing levels. Directs the efforts of plant supervision to ensure the consistent application of human resource policies, procedures, and plant rules. Assures adherence to safety accountability guidelines. Coaches and mentors team members to assure their ongoing development Stays abreast of new trends and developments in methods, techniques, equipment, tools, materials, and supplies, which might be incorporated into the production process to increase efficiency or better use of resources. Researches and recommends capital equipment purchases. Participates in special projects and performs other duties as assigned. Qualifications: A hands-on leader that is a role model with high integrity, positive influence, and strong business acumen that embraces change, possesses a continuous improvement mindset, and has a passion for exceeding customer and company expectations. Degree in Engineering, Industrial Technology or Business or equivalent 10 years of staff level leadership experience. Minimum of 7 years' experience in Operations and/or Lean Management. Printing industry experience is preferred. Experience in being a change agent in complex transformational activities. Significant experience in implementation of Lean principals as they apply to manufacturing operations. Ability to apply structured problem-solving methodologies to determine root cause of problems and provide effective countermeasures. Excellent communication skills Advanced excel skills Diversity & Inclusion: MCC fosters an inclusive culture that respects and embraces our teammates' diverse backgrounds and experiences, so that everyone can achieve their full potential here. We aspire for our company to truly reflect the diversity of our customers and the markets we serve. We are committed to equal opportunity for everyone, regardless of peoples' gender identity/expression, age, language, sexual orientation, ability, race, socioeconomic status, national origin or other characteristics. #LI-ML1 #appcast For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Mentor Employment Status: Hourly Full-Time Function: Maintenance Req ID: 27546 Purpose Troubleshoot, repair, inspect, and maintain power transmission, hydraulic, and pneumatic components on production equipment and systems. Job Description (Duties and Responsibilities) Mechanically troubleshoot, repair and maintain all types of industrial machinery, equipment and systems. Troubleshoot, inspect, adjust, and repair automated machines, process systems, and robotic systems to ensure they are working properly and safely. Performs equipment failure analyses (including preventative and unscheduled maintenance). Plan and implement preventative and predictive maintenance programs to maximize equipment up time. Perform bench work in repairing and maintaining production equipment and spare part assemblies. Keep neat orderly records and order spare parts. May be required to train fellow tradesmen. Must be able to rotate shifts and work weekends and holidays as required. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Basic Requirements Associate degree in Mechanical Technology is preferred or equivalent job experience. Must pass the skilled trades assessment test for this position. Must have some knowledge of mechanical troubleshooting including power transmission, fluid power, and pneumatics. Ability to read, write, and understand written specifications, procedures and prints. Ability to design and execute from verbal instructions. Must possess good organizational and communication skills. Must possess good mechanical aptitude and have the ability to work on close tolerance equipment and/or parts. Ability to use various measuring devices (torque wrench, micrometers, Vernier calipers, dial indicators etc.) Must be able to use math to calculate dimensions and determine equipment setups. Ability to fabricate, weld, or machine parts preferred. Ability to operate basic shop equipment (hoist, forklift, scissor lift, etc.) preferred. Excellent attendance required. Safety and quality conscious. Capable of lifting up to 75 pounds on an occasional basis. Must be able to work in confined areas, climb ladders, and work at heights of 28 feet. Must be able to wear a respirator. Must be willing to continuously improve technical skills and knowledge of plant equipment and systems. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Fort Loramie Employment Status: Hourly Full-Time Req ID: 26270 Summary Lincoln Electric Automation has an outstanding opportunity for a Mechanical Design Engineer. The Mechanical Design Engineer plays a key role supporting our team in the design, building, shipping, and service of Lincon Electric Automation products. A Mechanical Designer typically works on one project at a time (typically creating new designs that are very close to reference designs). In addition to competitive pay, Lincoln Electric offers an annual incentive plan, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits! What You Will Do • Understand and gain knowledge needed to work in software systems. i.e. Solidworks • Provide mechanical layouts and details to production • Take initiative to meet challenging project timelines and budgets (hours and material) • Ensure required ISO documentation is completed • Assist in compiling electronic documentation for Service Manuals, updating design package to reflect status configuration of any critical item • Assure that product, as designed, is in conformance with quote and customer purchase order • Work well in a team environment and communication groups may include; Machine builders, Project Management, Engineering Teams, Management, and support functions • Provide small-scale mechanical layouts and detail prints to production • May support other roles as a cross-training opportunity Education & Experience Requirements Mechanical Engineer or Mechanical Engineering Technology degree required Minimum 2 years of experience in manufacturing and design of industrial automated equipment CAD (3D modeling) required Computer proficiency including spreadsheet, word processing and project software Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Req ID: 26988 Overview We are seeking a talented and driven Embedded Software Engineer with expertise in Linux systems to join our innovative team. This role blends embedded application development, platform engineering, board support package (BSP) maintenance, and hardware bring-up. You'll collaborate with cross-functional teams to create secure, high-performance software for Linux-based embedded systems. Key Responsibilities Embedded Application Development Design, develop, and maintain applications for embedded Linux environments. Write clean, efficient code in C, C++, and Python. Implement and optimize device drivers, APIs, and middleware. Conduct system-level debugging, performance optimization, and troubleshooting. Create and execute test plans to ensure functionality, reliability, and quality. Partner with QA teams for seamless deliverables. Platform Engineering & BSP Maintenance Maintain and update BSPs across diverse hardware platforms. Work with hardware teams to develop, validate, and configure drivers, kernels, and bootloaders. Lead hardware bring-up for new designs, ensuring smooth software-hardware integration. Security and Compliance Embed security best practices throughout the software stack. Perform vulnerability assessments and risk analyses. Collaborate with security experts to resolve incidents and uphold compliance standards. Collaboration & Mentorship Partner with hardware, firmware, and QA teams to define requirements and solve challenges. Mentor junior engineers and contribute to team knowledge-sharing. Qualifications Bachelor's degree in Electrical, Computer, or Software Engineering (or related field); advanced degrees preferred. Level III: 5+ years of relevant experience. Level IV: 8+ years of relevant experience. Hands-on experience in embedded Linux development, including kernels, drivers, and applications. Strong knowledge of Linux kernel architecture, system calls, and bootloaders. Proficiency with version control systems (e.g., Git) and collaborative workflows. Familiarity with networking protocols, communication interfaces, and embedded hardware. Excellent problem-solving, debugging, and communication skills. Preferred Qualifications Experience with real-time operating systems (RTOS) and low-level programming. Expertise in Yocto Project, OpenEmbedded, and cross-compilation tools. Knowledge of Agile/Scrum methodologies. Background in safety-critical or security-focused systems. Contributions to open-source embedded or Linux projects. Understanding of digital electronics and hardware design. At Lincoln Electric, we invest in your growth through ongoing training, competitive benefits, and a collaborative culture that rewards initiative. Ready to power up your career? Apply now and help us weld the future. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

HIRING FOR ALL SHIFTS. Work with team to ensure equipment is operational. Perform daily preventative and predictive maintenance on equipment. Record and document maintenance performed. All other relevant duties to the job. Maintenance experience within a manufacturing environment required. Technical training and/or mechanical certification preferred. General knowledge of mechanical diagnostics.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Pay Range: ($20 - $26) Target Bonus: 5.0% Location: Bettendorf Req ID: 27900 Position Summary Responsible for setting up and machining weldments, tubes, blocks, and pins of all sizes in a timely manner using 2-D drawings and programming an ACU-RITE controller, while maintaining exceptional quality. Job Responsibilities Set-up, program, and machine components per print efficiently and accurately Complete any necessary inspection worksheets Maintain little to no re-work or scrap Safely operate forklifts and overhead cranes Keep work area clean and organized Perform job-related duties as assigned per priority. Experience and Skills 1 - 3 years' experience as a machinist Prior experience setting up and operating manual mills preferred Basic PC navigation High attention to detail and quality Ability to read and interpret blue prints Understand basic GD&T call-outs Ability to accurately use standard machinist measuring tools Ability to setup and run “one-off” parts to print efficiently and accurately Must work well under pressure Excellent team player with organizational and time management skills Nonessential Skills and Experience Safety (OSHA, SDS), ANSI (RIA) standards. Environmental, Health and Safety Understand the Company's EH&S Policy and how it relates to this job; Be aware of OSHA & EPA laws and regulations as well as company rules and policies that pertain to this job; Work in a safe and environmentally friendly manner and observe all company EH&S procedures; Immediately notify the supervisor if there is any safety hazard, any equipment not operating correctly or if there are any questions regarding EH&S procedures; and Attend required EH&S training. Physical Demands and Work Environment The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is typically required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; bend; squat; climb; see, talk and hear. Be able to climb ladders; lift hand tools up to 40 lbs. consistently, and parts up to 50 lbs. consistently. Repetition with activity. Work environment: The noise level in the work environment is usually moderate. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Do you have experience in Industrial Cleaning? Are you passionate about food safety? Do you love a 3-day work week? Do you want to enjoy 4 days off a week? Come join our Waterford Sanitation Team Fri. Sat. & Sun.: 6am-6pm (work 36 hours get paid for 40!) Starting base wage $17.35 per/hr Benefit eligibility after 30 days & PTO after just 90 days! Apply today for immediate consideration! We are hiring a Sanitation Worker to join our team and ensure that our plant is always clean and compliant with GMP and Food Safety standards. You will be responsible for cleaning all areas of the plant, from the ceilings to the floor, using chemicals and power washers. You will also be trained to operate a forklift and a scissor lift and perform other duties as assigned. Do you have a passion for cleanliness and safety? Prior experience in industrial cleaning with the use of industrial power-washing equipment and chemical cleaning, or janitorial services cleaning preferred. Ability to work in a manufacturing environment with exposure to high temperatures, fumes, moving parts, noise, allergens, heights, and hot surfaces required. We Offer a Feast of Benefits Medical, Dental, Vision, Life, Flexible Spending Account, Retirement Savings Plan with Match, Short Term Disability, Long Term Disability, Group Critical Accident Insurance, Group Critical Illness Insurance, Employee Assistance Plan and numerous opportunities to volunteer in the communities in which we operate. Paid Time Off (PTO) available after 90-days. You will be considered for employment in our inclusive workplace Because at Shearer's, we are committed to providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, protected veteran status, or any other characteristic protected by law. [Sanitation] #hpind