FIND PERSONALIZED JOBS
Sign up to Zippia and discover your career options with your personalized career search.
Sorry, we can't find that. Please try a different city or state.
APPLY NOW
Apply Now
×
FIND
PERSONALIZED JOBS

Sorry, we can't find that. Please try a different city or state.

CONTENT HAS
BEEN UNLOCKED
Close this window to view unlocked content
or
find interesting jobs in

Log In

Log In to Save

Sign Up to Save

Sign Up to Dismiss

Sign Up

SIGN UP TO UNLOCK CONTENT

or

The email and password you specified are invalid. Please, try again.

Email and password are mandatory

Forgot Password?

Don't have an account? Sign Up

reset password

Enter your email address and we will send you a link to reset your password.

Back to Log In

Log In

Log In to Save

Sign Up to Save

Sign Up to Dismiss

Sign up to save the job and get personalized job recommendations.

Sign up to dismiss the job and get personalized job recommendations.

or

The email and password you specified are invalid. Please, try again.

Email and password are mandatory

Already have an account? Log in

reset password

Enter your email address and we will send you a link to reset your password.

Back to Log In

Company Saved

Answer a few questions and view jobs at that match your preferences.

Where do you want to work?

Job Saved

See your Saved Jobs now

or

find more interesting jobs in

Job Dismissed

Find better matching jobs in

Your search has been saved!

Top 50 Sheet Metal Mechanic Skills

Below we've compiled a list of the most important skills for a Sheet Metal Mechanic. We ranked the top skills based on the percentage of Sheet Metal Mechanic resumes they appeared on. For example, 17.6% of Sheet Metal Mechanic resumes contained Service Aircraft as a skill. Let's find out what skills a Sheet Metal Mechanic actually needs in order to be successful in the workplace.

These Are The Most Important Skills For A Sheet Metal Mechanic

1. Service Aircraft
demand arrow
high Demand
Here's how Service Aircraft is used in Sheet Metal Mechanic jobs:
  • Clean, refuel, and change oil in line service aircraft.
  • Jack, tow, and service aircraft.

Show More

2. Customer Specifications
demand arrow
high Demand
Here's how Customer Specifications is used in Sheet Metal Mechanic jobs:
  • Used manufacturing specifications and quality procedures and instructions, operations and work sheets and company and customer specifications and procedures.
  • Installed forced air heating and cooling systems in residential and commercial environments according to plans or customer specifications.
  • Perform measurements and cut steel materials to customer specifications and meet daily production.
  • Operated heavy-duty manufacturing equipment to prepare metal products according to customer specifications.
  • Inspected finished products for quality and adherence to customer specifications.
  • Prepared the materials according to the customer specifications.
  • Shear automotive cloth to customer specifications.
  • Shear materials to customer specifications.
  • Inspect, operate, and test completed products to verify functioning, machine capabilities, or conformance to customer specifications.
  • Interpreted and converted blueprints and customer specifications into shop drawings; laid out and measured raw material for cutting.
  • Assembled aircraft component parts using blueprints, schematics, pneumatic hand tools and precision measuring tools to customer specifications.
  • Used work orders and shop drawings to cut aluminum and hard metal alloys to customer specifications.
  • Worked in the Metal Fabrication Department; operating shears to cut steel according to customer specifications.
  • Cut steel according to customer specifications, load/unload steel on trucks for inbound/outbound orders.
  • Set up machines to produce welded parts and assemblies to customer specifications.
  • Cut and bundled steel to customer specifications.
  • Meeted customer specifications and delivery requirements.
  • Work with plant engineering to design new or modify existing plant equipment to accomidate changes in product types or customer specifications.
  • Remove, refurbish, and install pre customer specifications.
  • provide structural support to Avionics Department on PC-12 aircraft parts fabrication and installation modifications to customer specifications

Show More

2 Customer Specifications Jobs

No jobs at selected location

3. Hvac
demand arrow
high Demand
Here's how Hvac is used in Sheet Metal Mechanic jobs:
  • Installed commercial HVAC systems and duct work according to blueprints for Clover School District in new and existing construction.
  • Installed, altered and repaired sheet metal products and equipment, including ducts and hoods for HVAC systems.
  • Plan, fabricate and install duct work for HVAC systems as well as installing other various HVAC accessories.
  • Worked as a journeyman sheet metal worker installing HVAC sheet metal ducting per blueprints on commercial building.
  • Perform new installation, repair and service of HVAC systems.
  • Sell optional HVAC equipment to new and existing customers.
  • Supervised the installation of industrial HVAC duct work.
  • Design, Fabricate and complete HVAC systems.
  • Sheet metal worker in HVAC trade.
  • Installed HVAC equipment on residential jobs.
  • Replaced old HVAC equipment on residential jobs
  • Renovated plumbing and HVAC systems.
  • Worked large commercial HVAC projects.
  • Install HVAC systems, general sheet metal flashings and sheet metal roofs for commercial and residential buildings; adhere to safety regulations
  • Fabricate, assemble and install HVAC ductwork.
  • Install industrial HVAC duct and ventilations.
  • Installed commercial HVAC ductwork and equipment.
  • Installed HVAC units, ducts, and pipeing.
  • Job description: installation of HVAC duct and fabrication of that duct Reason for leaving: moved to Las Vegas
  • Fabricated custom parts from blueprints for various nationwide companies/factories ~Specialized in fabrication and installation of custom industrial HVAC duct systems !

Show More

30 Hvac Jobs

No jobs at selected location

4. Safety Procedures
demand arrow
high Demand
Here's how Safety Procedures is used in Sheet Metal Mechanic jobs:
  • Utilize safety procedures by following established safety guidance and by maintaining a clean work environment.
  • Follow all safety procedures and reports unsafe conditions to safety officials or manufacturing supervision.
  • Completed tasks following all company safety procedures.
  • Conducted employee training in equipment operations or work and safety procedures, or assign employee training to experienced workers.
  • Design aircraft skin according to drawings, blueprints, directives, technical manuals, and safety procedures.
  • Follow proper safety procedures to ensure the safety of myself as well as the crew and apprentices.
  • Trained workers in construction methods, operation of equipment, safety procedures, and company policies.
  • Keep awareness of surroundings at all times and uphold all safety procedures and guidelines.
  • Applied safety procedures and policies as outline by the department safety handbook.
  • Trained and expert in usage of hazardous materials and proper safety procedures.
  • Practiced safety procedures to ensure the safety of myself workers.
  • Followed safety procedures, lock out - tag out.
  • Perform all work in accordance with established safety procedures.
  • Train new hires on safety procedures.
  • Follow and enforce safety procedures.
  • Trained personnel in tire/ wheeI replacement techniques and safety procedures while maintaining publications library.
  • operated equipment while following all safety procedures.
  • Comply with all applicable standards, policies, procedures, including safety procedures and the maintenance of a clean work area.
  • certified and follow all safety procedures.
  • Weld and assemble metal carts Follow all safety procedures and company rules while assembling Maintain orderly and organized work station

Show More

14 Safety Procedures Jobs

No jobs at selected location

5. Hand Tools
demand arrow
high Demand
Here's how Hand Tools is used in Sheet Metal Mechanic jobs:
  • Install assemblies in supportive framework according to blueprints, using hand tools, power tools, and lifting and handling devices.
  • Tack welder, plasma cutter, roll press machine, grinders, torches, forklift, computer, various hand tools.
  • Replace or repair worn, defective, or damaged components, using hand tools, gauges, and testing equipment.
  • Adjust, align, and calibrate aircraft systems using hand tools, gauges, and test equipment.
  • Sheet Metal Apprentice Use hand tools to hang and install sheet metal/air duct Read blueprints for correct placement
  • Shaped metal material over anvil, block, and the form, using hand tools.
  • Worked on many phases of repair on F/18 aircraft, using pneumatic and hand tools.
  • Operated forklift, grinders, drills and other hand tools required by job.
  • Secure section in place using adhesives, hand tools, and power tools.
  • Work with sheet metal hand tools, drills and cutting saw tools.
  • Used special hand tools and machines common to metal worker's trade.
  • Operated hand tools to adjust functional parts of devices and control instruments.
  • Worked with hand tools and electric tools.
  • Frequent use and knowledge of hand tools.
  • Use miscellaneous measuring and hand tools
  • Used hand tools to mount, install, and secure tools.
  • Use hand tools and power tools.
  • Measure and cut sheet metal to be applied to roofs and side of buildings using various electric hand tools.
  • Utilize hand tools (i.e.
  • Sheet Metal Setup and Operate Strippit Turret Press Setup Forming Brake Setup Shear Drill Press, Hand Tools

Show More

79 Hand Tools Jobs

No jobs at selected location

Job type you want
Full Time
Part Time
Internship
Temporary
6. Layout
demand arrow
high Demand
Here's how Layout is used in Sheet Metal Mechanic jobs:
  • Developed and laid out patterns that used materials most efficiently, using computerized metalworking equipment to experiment with different layouts.
  • Utilized knowledge of working characteristics of metallic and nonmetallic materials, machining and layout techniques.
  • Performed all levels of sheet metal work from layout and design, through fabrication and installation.
  • Developed layouts and operated: shears, CNC punch presses and mechanical and hydraulic brakes.
  • Performed layout of steel, assembly, and welded as instructed during Journeyman training.
  • Assemble and fabricate various metals in accordance to navy vessel layouts and drawings.
  • Modified raw sheet metal based on measurements and specifications for layout and press.
  • Used trigonometry and geometry in layout patterns, shapes, and fittings.
  • General fabrication and layout of iron and steel beams.
  • Surface plate layout and model making experience.
  • Trained personnel in advanced layout techniques.
  • Make patterns and template layouts.
  • Gained Shop, Layout and Field Skills.
  • Read blueprints, find location of work to be done .layout exact location of work or welding to be done.
  • Drill close tolerance holes for fastener installation Layout, assemble and install spar cap to wing skin.
  • Work off of NAVSEA, and drawings to be in compliance with sketches,layouts, and schematics that's required.
  • Metal Fabricator and Layout * Forklift, Boom Lift and Skytrak
  • Sheet metal layout of scuppers, litre heads, pad covers, pitch - pockets and square to rounds.
  • Read blueprints, created layouts, fabricated prototype and production run parts Tig and wire feed welding Managed parts inventory
  • Weld and bend sheet metal Operate plasma table Read blueprints Load trucks Install volume dampers Paint ductwork Sub assemble ductwork Layout ductwork

Show More

21 Layout Jobs

No jobs at selected location

7. Aluminum
demand arrow
high Demand
Here's how Aluminum is used in Sheet Metal Mechanic jobs:
  • Drilled, reamed, and countersunk close tolerance holes to engineering specs in aluminum, titanium, and composite alloys.
  • Fabricated and assembled mock up parts out of aluminum, wood, fiberglass, and plastic.
  • Roughened aluminum surfaces with acid solution and steel wool to ensure paint adheres to surface.
  • Maintained progress at compressed schedules Drilling and reaming through stack ups of titanium and aluminum.
  • Bend and cut aluminum, install rivets, pattern skins and fabricate aircraft components.
  • Attached and created a sidewall support to attach aluminum composite material for siding.
  • Lay out, cut, bead and crimp aluminum and stainless sheet metal.
  • Metal and aluminum polishing, Shipping and Receiving castings, assembly buffing.
  • Fabricated aluminum hydraulic, pneumatic, fuel, and oil lines.
  • Fabricated of aluminum and steel, wiring and trimming of refrigeration.
  • Riveted and bonding both aluminum and composite parts together.
  • Epoxy and polyurethane foams, aluminum and wood.
  • Clean and Treat Aluminum Corrosion.
  • Copper, Brass, Aluminum, Steal, Wire, etc.
  • Fabricated sheet metal, cut, trimmed, bend, sanded, and grinded aluminum while holding tolerances.
  • Job consist of setting aluminum material in jigs for production welding binding different components together for finish product.
  • Performed scrap metal processing Regulated aluminum cans, metal, copper old sheet Performed lifting objects over 50 lbs
  • Install aluminum panels on commercial buildings Work from 30-90 foot lifts (various) Analyze blue prints
  • Hang metal,composite panel,and aluminum panel...operate boom lift
  • EXPERIENCE: API Outdoors 06/14/2001 to 604 Kimbrough Rd 02/23/2002 Tallulah, LA 71282 318-574-4903 QUALIFICATIONS: Aluminum production welder.

Show More

16 Aluminum Jobs

No jobs at selected location

8. Job Site
demand arrow
high Demand
Here's how Job Site is used in Sheet Metal Mechanic jobs:
  • Perform cabinetry modifications and installations on job site for customers.
  • Blueprint reading, power tools and following safety precautions at a job site are among other work duties.
  • Assure the quality of the welds before shipping completed pieces to the job site.
  • Assist Journeymen in installation of HVAC systems * Job site and fab shop clean up
  • Followed established job site safety regulations and maintained a safe and clean work area.
  • Worked with other trades on job sites to ensure that all construction was done
  • Organize around the shop and delivered pieces of duct work to job sites.
  • Operated forklift to load and unload material and machinery needed for job sites.
  • Worked primarily with commercial systems with emphasis on state inspected job sites.
  • Installed copper tubing as needed on various job sites.
  • Practiced safety regulations while out on the job site.
  • Sized air duct for existing and future job sites.
  • Restored job site to previous condition before leaving.
  • Worked with various contractors and companies on numerous job sites installing HVAC ductwork and associated materials.
  • Lead man on the job site measuring and determining correct materials required to complete installation.
  • Job site preparation * Residential and commercial duct work (fabrication / installation)
  • Installed ductwork in commercial building, also delivered product to job sites.
  • Operate all and any heavy equipment at the shop or job sites..
  • Prepared tools and supplies for job sites .
  • Use correct PPE on job sites , keep good house keeping.

Show More

13 Job Site Jobs

No jobs at selected location

9. Supportive Frameworks
demand arrow
high Demand
Here's how Supportive Frameworks is used in Sheet Metal Mechanic jobs:
  • Install duct assemblies in supportive frameworks, maneuvering completed units into position for installation, and anchoring the units.
  • Install heating and air conditioning ducts in supportive frameworks.
  • Install metal sheets with supportive frameworks.
  • Installed assemblies in supportive frameworks.

Show More

7 Supportive Frameworks Jobs

No jobs at selected location

10. Drill Press
demand arrow
high Demand
Here's how Drill Press is used in Sheet Metal Mechanic jobs:
  • Skilled in the use of C-rivet floor squeezer, bench drill press, hand rivet squeezer, and hand drills.
  • Fabricated or repaired parts using such machines as lathes, breaks, shears, drill presses and English wheels.
  • Operated wide variety of equipment including power saws, sanders, grinders, drill press and basic hand tools.
  • Cut, punched and threaded sheet medal using power saws, drill presses, hand and power sheers.
  • Set up and maintain shop equipment such as brakes, shears, drill presses, and milling machines.
  • Operated a wide variety of equipment including drill press, forklift, welder, etc.
  • Operated drill presses, milling machines, rivet and hardware presses safely and correctly.
  • Use machines such as drill press, compression riveters, pneumatic squeeze.
  • Operated press-brakes, rollers, drill press other tasks as assigned.
  • Operated shop equipment such as band saw, lathe, table saw, drill press, shear and brake press.
  • METAL BREAKS, METAL CUTTING SHEARS, BAND SAW, DIMPLIER, DRILL PRESS, HOLE PUNCH and many others.
  • Use of Electrical Sheers, Break machines, Spot welders, Drill press etc...
  • Used shear, band saw, drill press, and grinder.
  • Shop tools such as Band saws, drill press, shrinker/spreader, pan brakes and metal table shears.
  • Drilled and tapped holes up to .375" using drill press, air tap, and electric drills.
  • Fabricated parts using punch press,press brakes, shears, cutoff saws, drill press.
  • Operate metal shear and brake equipment, iron worker, drill press and various hand tools.
  • perform cut lists in fabrication shop using plasma cutter, drill press and hand grinders.
  • Used a drill press in deburring finished metal cuts.
  • Operated surfacing machine Operated CNC brake machine Installed hardware Ran drill press and removed burrs from sheet metal Operated forklift

Show More

12 Drill Press Jobs

No jobs at selected location

11. Stainless Steel
demand arrow
high Demand
Here's how Stainless Steel is used in Sheet Metal Mechanic jobs:
  • Operated any machinery necessary to manufacture quality stainless steel sinks.
  • Sheared copper, aluminum, stainless steel, hot and cold rolled sheet metal to +/- .0005 thousandths of one inch.
  • Work with different types of materials such as: aluminum, stainless steel, wood, fiberglass, and plastic.
  • Experienced with sheet metal prep and finish tools for all metals; stainless steel, aluminum, and exotic alloys.
  • Install and repair heating and air conditioning ducts, roofing, stainless steel appliances, siding and metal partitions.
  • Fabricated items from galvanized steel, stainless steel, copper, aluminum, and other types of sheet metal.
  • Operate band saws cutting excess metal flash on Zirconium, Titanium, Cobalt Chrome and Stainless Steel metal parts.
  • Worked with the welder to install a new foundation or new stainless steel pads depending on the job.
  • Welded separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
  • Worked with different metals including stainless steel, aluminum, magnesium, honeycomb material, and alloys.
  • Certified for fusion welding on titanium, nickel based alloys, aluminum, and stainless steels.
  • Worked with materials such as stainless steel, copper sheet, magnesium, alloys and aluminum.
  • Shielded metal arc welder (stick), carbon steel and stainless steel welding.
  • Installed HVAC units * Industrial duct work, fans * Stainless steel duct work
  • Stick for Steel, Stainless Steel, Aluminum for all positions.
  • Worked with galvanized steel, stainless steel and aluminum.
  • Work with Aluminum, stainless steel, titanium.
  • Cut, bend, weld, and buff stainless steel
  • Cut, sort, and stack stainless steel.
  • punched out material on amada punch, using 24 gauge galvanized steel to 16 gauge stainless steel.

Show More

6 Stainless Steel Jobs

No jobs at selected location

12. Punch Press
demand arrow
high Demand
Here's how Punch Press is used in Sheet Metal Mechanic jobs:
  • Fabricate sheet metal parts for various types of electronic controllers -Operate CNC NISSHINBO TURRET PUNCH PRESS WITH FABRIWIN CAD program -Blueprint reading
  • Punch Press & Forming Machine Operator: Setting up & running Punch Press, along with running Forming Machine.
  • Cut metal on shear at certain length and width Some welding and some hole punch press operation
  • Program and operate C. N. C. punch presses and abrasive water jet and laser cutters.
  • Set up and run hem saw iron worker punch press.
  • Punch Presses and TOX-Machine, under supervision of skilled mechanics.
  • Sheet metal flat layouts and Turret punch press
  • Operated punch press and drill press.
  • Used various lathes, mills, CNC punch presses, drill presses, shears and brakes.
  • Spot Welder and punch press operator for manufacturing store fixtures Handle quality control procedures for products.
  • Operated punch press, brake, and shear Assemble electronic parts on to sheet metal enclosures
  • Used Amada and Minster equipment, including punch presses, shears and press brakes.
  • Punch Press Operator Responsible for programming, punching and notching parts per print.
  • Program and ran a Strippit Super 750 Single Punch Press.
  • Program and operate Weidman N. C. turret punch press.
  • Performed all programming of CNC Strippit punch press.
  • up operation of precision shears, brakes, amada, punch presses.
  • Lead man sheet metal fabrication, press brake,punch press,shear
  • Operate an Amada power shear, Amada turret punch press.
  • Operate CNC programmable Strippit punch press .

Show More

1 Punch Press Jobs

No jobs at selected location

13. MIG
demand arrow
high Demand
Here's how MIG is used in Sheet Metal Mechanic jobs:
  • Operated MIG/TIG welder, spot welder, punch machine, polisher, sander, sand blaster and welding machine
  • Performed fabrication and MIG welding process on mild steel with jigs and fixtures set-up for production.
  • Complete minor torch ups with MIG welders.
  • Weld fittings in the shop and field for different commercial jobs using arc and Mig welding equipment.
  • Perform stick or mig welding as needed to fit, install and secure systems.
  • Demonstrated welding skills by utilizing the arc, mig, and tic machine.
  • Utilized a hand held wire-fed Mig welder for metal tube repair procedures.
  • Galvanized ductwork fabrication, using machines and MIG welding.
  • Weld Mig/Stick Hoods and other kitchen and exhaust equipment.
  • Operated air tools and mig welding gun during assembly.
  • Welded steel bars to frames using mig welding machine.
  • Operated mig welder to weld components together.
  • Operate mill, shear, press brake; install fasteners in sheet metal; deburr; mig weld to customer specifications.
  • Fabricate sheet metal floors/ running boards/ trany covers/ fire walls and some mig welding involved for some gussets.
  • Certified Mig welder Job consisted of making and installing duck work and installing air handlers.
  • Fabricate and ship out Granulators (Machines that grind up plastics) Press brake operator Komatsu plasma operator Mig welder
  • Steel, Steel and Aluminum with Tig as well as Mig.
  • Installed commercial duct work Mig Weld Installed Air Handlers Stainless Steel duct work
  • Present While in training for my MOS I welded with Tig, Mig, Stick, and Oxy & Ace welding.
  • Maintain dock levelers/commercial overhead doors Build and maintain hvac systems Welding mig and stick welding Install fan motors

Show More

2 MIG Jobs

No jobs at selected location

14. Rivet Guns
demand arrow
high Demand
Here's how Rivet Guns is used in Sheet Metal Mechanic jobs:
  • Employed wide variety of hand and power tools including rivet guns, drills, precision measuring instruments and electronic testing devices.
  • Specialized in using power tools, hand tools, machines and equipment such as shears, drills, and rivet guns.
  • Assemble air plane panels using air power tools such as grinders, wire brush, buffers as well cherry rivet guns.
  • Used various aviation hand tools including but not limited to drill motors, rivet guns, squeezes and die grinders.
  • Used hand tools such as, grinders, rivet guns, staple guns, and also used plasma cutters.
  • Utilized rivet guns, die grinders, calipers, drills, bucking bars, and reads and interrupts blueprints.
  • Used numerous pneumatic and hand tools such as rivet guns, squeezes, drill motors to accomplish daily tasks.
  • Rivet Guns, Hi-Locks, Replacement of Fasteners Making metal trims and parts for doors lavatories and Galleys.
  • Use of pneumatic tools, rivet guns, bucking bars, riveting, cutting tools.
  • Use of rivet guns and bucking bars was also a major part of the job.
  • Installed solid rivets with various tools such as rivet guns and fasteners.
  • Assembled cockpits for Apache helicopters using hand drills and rivet guns.
  • Maintain and operate rivet guns, drills, and coping saws.
  • Worked with pneumatic tools such as drills and rivet guns.
  • Used tools such as drills, rivet guns, hand tools, micrometers, scales, dial calipers, etc.
  • Advance experience in the use of power tools, hand tools, drills, rivet guns.
  • Experience with all pneumatic tools, rivet guns and drill motors associated with sheet-metal assy.
  • Used rivet guns, solid, cherry max, huck clinch, blind rivets, blind bolts and sealers.
  • rivet guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, etc).
  • rivet guns, bucking bars, and drills), scales, fixed and mobile jigs to construct aircraft.

Show More

5 Rivet Guns Jobs

No jobs at selected location

15. Air Compressors
demand arrow
average Demand
2 Air Compressors Jobs

No jobs at selected location

16. CNC
demand arrow
average Demand
Here's how CNC is used in Sheet Metal Mechanic jobs:
  • Operated 10ft hydraulic shear, CNC brakes, urethane rollers, hydraulic rollers, and 300-ton press.
  • Programmed CNC machines in a safe and efficient manner to ensure maximum production potential.
  • Operated CNC plasma laser cutter, held critical dimensions using a break press.
  • Instructed trainees in the CNC: Turning and Milling Machines.
  • Used a CNC controller to input information into machine.
  • Operate CNC punch & plasma cutter.
  • Operated a CNC Press Break.
  • Trained on all NC and CNC punches and brakes.
  • Program, set up and run CNC brake.
  • Inspect first piece part from CNC machine.
  • Lead Programmer/Operator of CNC multi-turret punching machine.
  • Operated large hydraulic shears, press rollers, CNC emblematic , lock seaming, edge turning, radius cutter machinery.
  • Programed the CNC to produce new parts meeting specifications.
  • Sheet metal comes out the cnc machine and i cut the excess sheet metal off and stack neatly
  • Operate Amada, Die-Acro, AccuPress Hydraulic Brakes, Weideman CNC, and all associated tooling.
  • Sheet metal training CNC training Wire & RAM EDM experience
  • Operate various CNC machines Maintain and handle tools and equipment used for production procedures Various Shipping and receiving duties Quality control
  • out of business) -Fabricates sheet metal ductwork and fittings -Operate CNC plasma cutter -Blueprint reading, calipers and gauges
  • Load designated program onto strippit CNC Change tools that are needed for the program Check for leaks on refrigerator units
  • handle raw materials use cnc machines to cut metal read blueprints use press machines operate forklift process orders

Show More

3 CNC Jobs

No jobs at selected location

17. Structural Repair
demand arrow
average Demand
Here's how Structural Repair is used in Sheet Metal Mechanic jobs:
  • Utilized engineering drawings and technical specifications to plan, prepare and perform structural repairs and modifications.
  • Performed structural repairs in accordance to Structural Repair Manuals.
  • Perform structural repair based on technical drawings and requirements.
  • Researched Boeing drawings, Aircraft maintenance manuals, structural repair manuals and IPC To insure compliance of repairs.
  • Trained employees to remove and replace fuel, patch bladders, components, and structural repairs.
  • Accomplished aircraft structural repair, modifications per blueprint, engineer drawing, or applicable tech order.
  • Performed major modifications, structural repairs and fabrication on H-60 helicopters, components and assemblies.
  • Assigned to perform major and minor structural repairs required during overnight maintenance in ATL.
  • Performed structural repairs and modifications to aircraft fuel cells, flight controls and structures.
  • Perform cold work on the holes as required per structural repair manual.
  • Perform structural repair, modification, and corrosion protection treatment.
  • Performed Structural Repair and General Maintenance on C-17 Aircraft.
  • Perform structural repair of commercial aircraft.
  • Read Blueprints and Structural Repair Manuals.
  • performed structural repairs to commercial aircraft to include major airlines like America West
  • Repaired damage of skin panel using air tools and sealing Materials.Cargo modification B737.CRJ, ERJ structural repair
  • Perform aircraft structural repair, rework, and modification on UH-60 Blackhawk B/F/H/R/S Model aircraft.
  • Performed structural repairs on UH-60 Blackhawks.
  • Performed structural repair on F5, F15, F16, and A-10 aircraft at Nellis AFB.
  • Major structural repair, structural modifacation, skin replacements on all Gulfstream aircraft.

Show More

8 Structural Repair Jobs

No jobs at selected location

18. Engineering Department
demand arrow
average Demand
Here's how Engineering Department is used in Sheet Metal Mechanic jobs:
  • Provide trip reports and system test evaluations to engineering department upon completing mission.
  • Coordinate with Engineering Department to improve manufacturing processes, and engineering specifications.
  • Worked with engineering department with first run parts to ensure process viability and suggest elimination of, or additional required processes.
  • Worked closely with the engineering department on coming up with solutions to fixing mistakes in planning, repairs etc.
  • Worked in the secret city test areas fabricating tooling and fixtures for various test labs in the engineering department.
  • Provided assistance to the engineering department in the testing of prototypes.
  • Researched proper repair techniques as specified by Boeing through their computer database Communicated with the engineering department for major discrepancies

Show More

19. Brake Press
demand arrow
average Demand
Here's how Brake Press is used in Sheet Metal Mechanic jobs:
  • Experience in steel fabrication machines such as brake press, shear, punch press and assorted hand tools.
  • Sheet Metal Fabricator Setup and operate CNC Brake Presses, Shear, Punch Press, Roller.
  • Experienced in running brake press, reading prints, punch press
  • Brake Press Operator- Formed bend parts according to print.
  • Operated an Amanda brake press and performed brazing.
  • Operated brake press plasma cutter grinders.
  • Brake press and shear operations.
  • Form those pieces with the 230-ton brake press.
  • Brake Presses, Shears, Multi-head hydraulic punches, welding/spot welders, lathe, Bridgeport Milling, etc.
  • Worked with sheet medal equipment including the TURRENT TECH-AMADA- Apelio 2510/ Cell operator/ Brake press.
  • Brake press/ stripit press operator, bending sheet metal per tooling, blueprint reading.
  • Install various hardware in product Being trained to operate brake press
  • Brake press department * Lead man
  • Operated a sheer, brake press, pick up parts with dollie jacks, pull parts to area.
  • Machine set-up Material handler Brake press assistant
  • Brake press set/Up, machines (Wison and Amada).
  • Spot & Seam Weld Brake Press Use Shear to cut material to size Aligns parts on jigs using templates and fixtures.
  • Sheet Metal Work Punch and Brake presses Shipping and Receiving Personal & Professional References Education
  • Brake press and stripped press Bending sheet metal per tooling Piercing dimensioned holes Blueprint reading
  • Brake Press Operator * Ran Wysong, Tri Acro, Diacro, and Accurpress.

Show More

4 Brake Press Jobs

No jobs at selected location

20. Tig
demand arrow
average Demand
Here's how Tig is used in Sheet Metal Mechanic jobs:
  • Investigated major malfunctions and breakdowns of heating, refrigeration and air-conditioning systems.
  • Work with hand and power tools for both the field and shop and experience with MIG and TIG welding.
  • Verified inventory computations by comparing them to physical counts of stock, and investigated discrepancies or adjust errors.
  • Work on top of, under, and in tight compartments of vehicles in cramped or awkward positions.
  • Installed systems such as heating units, non and water tight ventilation duct, and metal furniture.
  • Use precision tools to ensure a water-tight roof while maintaining an aesthetically pleasing finished product.
  • Investigated accidents/incidents to find cause and find a new procedure to prevent future occurrences.
  • Use caulks and sealants for air and water tight vent work.
  • Operate CNC plasma table, press brakes, rollers, spot welders, MIG TIG and stick welders.
  • Sealed and cleaned 737 model fuselage to ensure airtight integrity for interior installation and product delivery.
  • Investigated and evaluated materials, systems and equipment for work orders Blue print reading stamping inspection reports material control number.
  • Perform mockups, static fatigue testing, and quality control inspections to ensure aircraft reliability according to FAA compliance regulations.
  • Repaired metal components used on the Patriot missile system using MIG, STICK, and TIG welding devices.
  • Adjusted bolts and top bows of metal frame to tighten frabric.
  • Complete high priority orders to tight tolerance customer specifications Maintain traceability requirements as maintained by the FAA, AS9100, and NADCAP
  • Stick welded and tig welded everyday, and put each duct on measurement according to blueprint.
  • Stick, Mig, and Tig welding on various mission essential projects
  • Worked on ductwork Tig welding & sanding
  • Read blueprints Setup for job:welding Tig/meg welding Courier
  • Cut & bend sheet metal Drill holes as per drawings Tig & Mig weld together In the construction of aluminum fuel tanks

Show More

1 Tig Jobs

No jobs at selected location

21. Inspect Parts
demand arrow
average Demand
Here's how Inspect Parts is used in Sheet Metal Mechanic jobs:
  • Reviewed work orders by the use of measuring instruments to inspect parts, and use schematic diagrams to plan work.
  • Take apart and inspect parts for wear, warping, or other defects.
  • Inspect parts, read blue prints, inventory control, material handling.
  • Inspect parts using precision measuring equipment i.e.
  • Inspect parts according to blueprint.
  • Used measuring instruments to inspect parts.Used precision measuring instruments, templates, and fixtures to measure dimensions of finished work pieces.
  • Used measuring instruments to inspect parts.
  • Used measuring instruments toinspect parts.

Show More

22. Osha
demand arrow
average Demand
Here's how Osha is used in Sheet Metal Mechanic jobs:
  • Adhered to OSHA regulations regarding personal protective equipment for hazardous materials.
  • Completed tasks following all OSHA requirements and company safety procedures.
  • Complied with company as well as OSHA rules and regulations to safely provide optimal product and professional results.
  • Followed all safety policies and procedures required by OSHA to provide a safe working environment.
  • Use of hand held and power tools, follow all OSHA safety guidelines.
  • Worked on a construction site and had to follow strict OSHA safety code.
  • Have before been OSHA certified and understand safety in a work environment.
  • Adhered to OSHA regulations by inspection and documenting safety harnesses and PPE.
  • Maintain a safe working environment using OSHA 10, 30 Certifications.
  • Performed all maintenance activities as per OSHA and company safety requirements.
  • Adhered to OSHA safety standards while maintaining productivity in the workplace.
  • Follow FAA procedures, OSHA, and safety rules.
  • Read blue prints and followed all OSHA safety codes.
  • Follow OSHA rules and protocols to prevent injury.
  • Maintained work area to OSHA safety standards.
  • Followed all safety guidelines required by OSHA.
  • Ensured safety compliance FAA and OSHA.
  • work safely according to OSHA regulations at various heights; power tools.
  • Skin repair Ensured safety OSHA procedures Followed FAA procedures
  • Have World Wide number for Intel work, Superman, S.L.A.M., SSTA and OSHA training cert.

Show More

23. Reference Lines
demand arrow
average Demand
Here's how Reference Lines is used in Sheet Metal Mechanic jobs:
  • Locate established reference lines or points and perform sheet metal assembly work without aid of jigs, fixtures, or other tooling
  • Locate and mark dimension and reference lines on defective or replacement parts, using templates, scribes, and compass.
  • Lay out, measure, and mark dimensions and reference lines on material sheet metal skins and other aircraft components.
  • Lay out, measure, and mark dimensions and reference lines on material according to drawings or templates.
  • Reference lines on material such as roofing panels according to drawings or templates.
  • Located and marked dimension and reference lines on defective part of structure.
  • Measure & mark dimensions/reference lines on metal sheets.
  • Mark's dimensions and reference lines on material using scribers, dividers, squares and rulers.
  • Layed out, measured, marked dimensions, and reference lines on material.

Show More

15 Reference Lines Jobs

No jobs at selected location

24. Verbal Instructions
demand arrow
average Demand
Here's how Verbal Instructions is used in Sheet Metal Mechanic jobs:
  • Determine project requirements, such as required methods or materials, using blueprints, drawings, and written or verbal instructions.
  • Determine project requirements include scope assembly sequences and require methods and materials according to blueprints, drawings or verbal instructions.
  • Studied required blueprints and drawings to determine specific locations for duct work, according to written or verbal instructions.
  • Interpreted plans and specs, shop drawings, written and verbal instructions to set up and complete jobs.
  • Worked from engineering drawings, blueprints, quality procedures, work sheets military specifications and verbal instructions.
  • Fabricated and assembled structural metal products, according to job order, verbal instructions and blueprints.
  • Lay out of sheet metal parts using blueprints, drawings, and written or verbal instructions.
  • Worked from sketches, prints and verbal instructions, coordinated with other technicians and designers.
  • Received and correctly processed both written and verbal instructions, prints and work orders.
  • Interpreted blueprints, drawings, and written and verbal instructions to set up jobs.
  • Follow blueprints, drawings, or written or verbal instructions to complete installations.
  • Work from blueprints, engineering sketches, manufacturing specifications and verbal instructions.
  • Repaired/fabricated sheet metal parts/assemblies per blueprints, shop drawings or verbal instructions.
  • Fabricate parts from verbal instructions and sketches, and also field installations.
  • Read and interpreted blueprints, written instructions, verbal instructions and specs.
  • Followed layouts, blueprints, and verbal instructions.
  • Produced metal signage based on blueprint and/or verbal instructions Drilled and punched holes in metal for screws, bolts, and rivets
  • Repaired, Modified, and Refurbished various military shelter Interpreted mechanical drawings, written and verbal instructions to set up jobs.
  • Apprentice Determine project requirements, according to blueprints, drawings, and written or verbal instructions.
  • Determined project requirements according to blueprints,drawings,and written or verbal instructions.

Show More

6 Verbal Instructions Jobs

No jobs at selected location

25. Depot
demand arrow
average Demand
Here's how Depot is used in Sheet Metal Mechanic jobs:
  • Performed organizational, intermediate and depot level maintenance and heavy structural repair of aircraft.
  • Evaluate incoming aircraft for depot level discrepancies as according to technical publication standards.
  • Performed depot level overhaul repairs and modifications on SH-60 Navy Helicopters.
  • Performed depot level maintenance IAW maintenance instruction manuals.
  • Performed major overhaul and depot maintenance on various military aircraft, including F-14's, KC-10's and the Joint-Stars Program.
  • Repair of Nacelle intakes, maneuvering surfaces and floor boards for the U.S. Navy, Shipyard and Air Depot Bases.
  • Major over-haul and depot maintenance on various military aircraft including F-14s, KC135s and the Joint Stars Program.
  • Cross trained to aircraft mechanic accomplishing depot level repair of Air Force cargo, fighter and bomber aircraft.
  • Assigned to work on US Army Depot Level Maintenance under Theater Aviation Maintenance Program (TAMP).
  • Worked with civil service in a Depot level repair facility for the MHS60 Sea Hawk.
  • Experienced in total overhauling at a depot level maintenance level on the HH60 helicopter.
  • Performed depot level maintenance on F-15 C, D and E aircraft.
  • Specialized in major depot level repairs and replacements on aircraft.
  • Performed depot level maintenance on F-15 C/D model aircraft.
  • Performed structural repair at Depot Level on F4 aircraft.
  • Performed AVIM, AVUM and, Depot level maintenance.
  • Accomplished Depot Level structural repair on C130 aircraft.
  • Make Depot level repairs to corrosion damage areas.
  • Performed structural repairs up to depot level.
  • Certified as a depot level airframes (structural and hydraulic), and power plants Quality Assurance Representative.

Show More

2 Depot Jobs

No jobs at selected location

26. VAV
demand arrow
average Demand
Here's how VAV is used in Sheet Metal Mechanic jobs:
  • Supervised and trained apprentices, stainless installation, vent hoods, VAV boxes, phoenix fans, install Plexiglas, and demolition
  • Set roof curbs and equipment, supervised the installation of VAV boxes, flex duct and grills.
  • Set roof curves and equipment, installed VAV boxes, flex duct and grills.
  • Install and set up air handlers, VAV boxes, and air distribution.
  • Install fire damper, smoke detectors & VAV systems for commercial building.
  • Installed VAV boxes, fans and other related equipment.
  • Hang medium and high pressure VAV boxes.
  • Assemble Duct, Measure, Fabricate, and Seal Duct System, Hang Dampers, VAV's, Registers, etc
  • Installed VAV boxes HVAC units.
  • Installed stainless steel spiral ducts, VAVs, fresh air vents, set roof curbs and equipment according to engineering specifications.
  • Set up building environmental conditions, including adjusting thermostats, VAV boxes, room diffusers, new duct and equipment.
  • Run PVC drain lines and set different air handles such as Fan Powered Boxes, VAVs and Exhaust Fans.
  • Install ductwork, air distribution units, & VAV's * Soldered & brazed pipe, welded grease duct
  • Coordinate Sheet Metal Installation With Other Trades Measure Duct Work On Equipment And VAV Box Tie-Ins.
  • Installed duct work, hangers, vav's, flex, trimmed, layout, clean
  • Hang VAV's , install and set hangs.
  • Set chillers, boiler's and vav's.
  • Install ductwork Set rooftop units Air tested ductwork to customers' needs Laying out from blueprints Vav systems set up
  • Sheet metal mechanic Intepret blue print Lay out Install duct Drill hole Cut and shape sheet metal Make fittings VAV/Fire damper installer
  • Install ductwork,fans,registers,airtites,vavs,exhaust fans,make flexible connections and kitchehen hoods.

Show More

27. Business Requirements
demand arrow
average Demand
28. Machine Shop
demand arrow
average Demand
Here's how Machine Shop is used in Sheet Metal Mechanic jobs:
  • Fabricated and repaired parts by using machine shop instrumentation and equipment.
  • Machine shop Bridgeport operator tube bender
  • Participate in Tiger Team concept with Outside Machine shop on propeller and shaft change-out on two units.
  • Worked in an armored battalion repairing armored vehicles, Worked in a machine shop fabricating parts.
  • Controlled the flow of work in a precision sheet metal/ machine shop.
  • Operate lathes, drill presses, grinders and other machine shop equipment.
  • Worked in machine shop on production fixtures on drills and mills.
  • Set up and performed maintenance on fab and machine shop machines.
  • Light machine shop work as required.
  • Trained in the use of a wide variety of machine shop equipment as well as MIG welding.
  • Assisted in x ray, zyglow, heat treat, welding, planning and machine shop operations.
  • Machine Shop: Operator Mazak, Mori Seiki, Matsuura

Show More

4 Machine Shop Jobs

No jobs at selected location

29. Furnace Casings
demand arrow
average Demand
Here's how Furnace Casings is used in Sheet Metal Mechanic jobs:
  • Fabricated and installed sheet metal products such as control boxes, pipes, furnace casings, flashing, ducts and tubes.
  • Installed assemblies, such as flashing, pipe tubes, heating and air conditioning ducts, and furnace casings.
  • Install drainpipes, and furnace casings for commercial use.
  • Installed control boxes/vav's, dampers, drainpipes, and furnace casings.
  • Performed shut down work for Bethlehem Steel Changed galvanized covers on furnace casings

Show More

16 Furnace Casings Jobs

No jobs at selected location

30. FAA
demand arrow
low Demand
Here's how FAA is used in Sheet Metal Mechanic jobs:
  • Provide Quality work and accurate documentation to customer and FAA requirements.
  • Maintained safety protocols according to FAA regulations.
  • Have repairs inspected by FAA, log repairs per FAA standards, seal aircraft, and fuel pressure test.
  • Performed line maintenance, heavy maintenance and sheet metal repair according to engineering orders and FAA advisory directives.
  • Sheet Metal Mechanic performing FAA Class C inspection and associated sheet metal repairs.
  • Performed job tasks within estimated time and FAA, customer standards of quality.
  • Mix sealer and various chemical compounds to specific measurements per FAA regulation.
  • Maintained safety regulations monitored by the FAA (Federal Aviation Administration).
  • Work subject to FAA inspection approval and done per SRM per blueprint.
  • Performed Precision Cargo door mod on B757 per FAA Authorized Blue Prints
  • Performed internal audits, FAA audits, both fabrication and assembly.
  • Perform sheet metal tasks using FAA approved Structural Repair/Technical Repair Manuals.
  • Train workers on sheet metal assembly and following FAA regulations.
  • Complied with all Mods and checks IAW all FAA regulations.
  • Coordinated visits and audits with FAA inspectors and DCMA.
  • Inspect helicopter cabins to ensure they meet FAA guidelines.
  • Inspect, repair and restore aircraft per FAA structural requirements
  • Use FAA approved manuals proficiently.
  • Follow FAA regulations and practices.
  • modify and restore various types of aircraft per FAA structural requirements

Show More

30 FAA Jobs

No jobs at selected location

31. C-130
demand arrow
low Demand
Here's how C-130 is used in Sheet Metal Mechanic jobs:
  • Performed maintenance on C-130 including heavy structure replacement.
  • Sheet Metal Various repairs on C-130 fuselage and the wings some mods on wing tanks stringer and.
  • Lead Sheet-Metal Mechanic for install of Large Aircraft Infrared Counter Measure system on C-130 aircraft.
  • Performed sheet metal maintenance and repairs on P-3 Orion, C-130 and KC-10 aircraft.
  • Performed structural repair of highly technical components for F-16 and C-130 airplanes.
  • Fabricate and assemble components to blueprint specs for AC-130U gun ships.
  • Accomplished sheet metal repairs and modifications on C-130 aircraft.
  • Structure repairs and modification on ACU C-130 Gunship
  • Build Assemblies and Sub-Assemblies for C-130 aircraft.
  • Fuel cell repair, interiors, sheet metal parts fabrication on DC-8, C-130, DC-10, MD-11, 727.
  • Worked on CJ-135, C-130, P-3 and J-star warehouse.
  • Assembled center wing box on c-130H-Model.Performed routine production assembly operations on structural and mechanical sub-assemblies and aircraft systems.
  • performed sheet metal phase, daily, and scheduled maintenance inspections/repairs to P-3, C-9, and C-130 aircraft
  • Employed by Talentscale LLC for BAE working on C-130 Modifications at Hill AFB Utah.
  • Performed sheet metal and airframe and power plant work on military aircraft C-130.
  • Complete assembly of the C-130, C-5, F-14, F-22 Raptor and F-35 aircrafts.
  • Worked on KC-135 and C-130 's
  • Worked on C-130 center wing build up jig Layout, drilled, and installed fastener per engineering drawing Performed aircraft pressure test
  • Qualified in the following areas: Provide onsite depot support for AFSOC C-130 aircraft.
  • Performed preventative maintenance on Boeing [ ] and C-130 aircrafts.

Show More

32. Assembly Sequences
demand arrow
low Demand
Here's how Assembly Sequences is used in Sheet Metal Mechanic jobs:
  • Determined project requirements, including scope and assembly sequences.
  • Determined project requirements, assembly sequences, and materials using blueprints, drawings, or written/verbal instructions.
  • Determine project requirements, such as scope, assembly sequences, or required methods or materials.
  • Developed project requirements, including scope, assembly sequences and required methods and materials.
  • Metal Worker skilled in determining project requirements, including scope and assembly sequences.
  • Decided on project requirements including scope, assembly sequences and required methods.
  • Determine project requirements, assembly sequences, and required methods.

Show More

9 Assembly Sequences Jobs

No jobs at selected location

33. SRM
demand arrow
low Demand
Here's how SRM is used in Sheet Metal Mechanic jobs:
  • Performed structural repairs as required IAW the manufacturers SRM or engineering requirements.
  • Sheet metal and interior repairs, fabrication and installation of repair parts in accordance with SRM and maintenance manual requirements.
  • Assessed damage to aircraft and determined the proper repair per the SRM, engineering drawings, and FAA regulations.
  • Make them serviceable, IAW SRM according to manuals and or EO's handed by the department foreman.
  • Worked on different types of repair projects using repair references from SRM, AMM, blueprints, lay-outs.
  • Seat track/composite repairs, blue print reading, lay-outs, fabricated parts, and worked to SRM specifications.
  • Applied different types of primers IAW SRM to avoid corrosion in components electrical bonding and resistance check.
  • Remove and replace skin IAW SRM with solid rivet, hi-bolt, cherry max rivets, etc.
  • Perform sheet metal repairs and composites repair when applicable, in IAW BSRM.
  • Read and interpreted the structural repair manual (SRM).
  • Fabricated and installed repair parts as required per SRM.
  • Complied with Engineering Drawings and SRM's standards.
  • Metal fabrication, per SRM.
  • Experience in Reading STP's, SRM repairs.
  • Complete Repairs in a timely manner, highly knowledgeable with the SRM, AMM & IPC.
  • Fabricate parts and install doublers using the appropriate Blue prints, SRMS and Engineering Drawings.
  • Used of MM.IPC, SRM.Special training: safety, Scaffolding and work stand operation.
  • Performed Structural, Seat Tracks, Floor Panels, & Floor Beam Repairs on Aircrafts According to SRM & MM Guidelines.
  • performed repairs in accordance with SRMs and engineering
  • Advanced Sheet Metal Fabricate and install custom repairs iaw SRM and MM Perform reset (HMV) on U.S. Military Aircraft

Show More

34. Cessna
demand arrow
low Demand
Here's how Cessna is used in Sheet Metal Mechanic jobs:
  • Sheet Metal: Work on structural wing modification for Cessna 421 according to plans and specifications.
  • Completed Cessna's three week training course and passed testing on blueprints and sheet metal assembly.
  • Sheet metal assembler on the Cessna 550 and 560 aircraft, nose and tail sections.
  • Sheet metal assembler; successful completion of Cessna sheet metal and blueprint schooling.
  • Blue print certified and sealer certified through Cessna Aircraft training.
  • Complete build up of actuators for various Cessna models.
  • Worked on the 208 Caravan and Cessna Citation
  • Sheet Metal and composite repair for both corporate and private aircraft including Cessna, Learjet, Hawker, and Beechcraft.
  • Worked along side a small group of mechanics to maintain and build aircraft to specifications provided by Cessna.
  • Perform assembly operations on Cessna Caravan and Citation Encore/Bravo Cutting, filing, drilling, countersinking, etc.
  • Flight control overhauls on aircraft such as Beechcraft, Cessna, Piper and other small aircraft.
  • Preformed sheet metal assembly of Cessna CJ series cabin and tailcone assemblies for delivery to Cessna.
  • General assembly work is also done for Spirit, Cessna, Gulfstream, Sikorsky and Lockheed.
  • Assemble fuselage on the 208 Cessna Caravan and tailcone for 560XL Citation Excel.
  • Learned my sheet metal skills from the best at cessna.
  • Build up major assemblies, wingspars for Cessna models.
  • Assemble small parts Built airplane stabilizer for Cessna aircraft.
  • Sheet metal Mech on Cessna wing spars.
  • Assemble parts and fabricate parts for a variety of companies such as Lockheed, Beechcraft, Learjet, Cessna and Gulfstream.
  • Assembeled small parts for various aircraft including Beech, Cessna, Beech Gulfstream and Embraer.

Show More

35. Setup
demand arrow
low Demand
Here's how Setup is used in Sheet Metal Mechanic jobs:
  • Confer with other workers about machine setups and operational specifications.
  • Clean table, setup table with appropriate torch, gas and material and burn parts on DNC Plasma table.
  • Paint transport trailers for individual customers and company sales with a spray machine in a paint booth setup.
  • Read work orders or blueprints to determine specified tolerances and sequences of operations for machine setup.
  • Press Brake Setup & Operation, CNC Turret Setup & Operation, Shear Setup & Operation,
  • Determine setup procedures and select machine dies and parts according to specifications.
  • Prepared and ran bend setups and forming operations for mining machinery parts.
  • Programmed, setup and operated various CNC brakes and forming machines.
  • Operated and setup dies for various punch press machines.
  • Read work orders to prepare for machine setup.
  • Verified that machine setups conformed to specs.
  • Assist in manufacturing line setup.
  • Drilled holes via jig and fixture setup, 100% hole, check with go/no go hole probe.
  • Perform Manual Setups for shearing, rolling, and bending Knowledge in reading manufacturing sketches and following instructions on shop travelers.
  • Program, setup and operate CNC Equipment to produce spiral ductwork.
  • Train junior operators to setup and operate hydraulic Punch Presses.
  • Machine operator Tear down/setup General assembly
  • Lift Steel * Shear setup * Cut Steel
  • Brake Operator Spot Welding and Setup Shear Machine Operator Hi-Lo Driver Set up and operated fabricating machines.
  • Open and setup work area and linesMake adds and setup jobsStart paperworkRun jobsFinish paperworkClose area and line

Show More

9 Setup Jobs

No jobs at selected location

36. Shear Operator
demand arrow
low Demand
Here's how Shear Operator is used in Sheet Metal Mechanic jobs:
  • Shear operator and forklift operator.
  • Shear operator sheared to orders to sizes and packed into boxes that need to be shipped to various places.
  • Shear Operator - Cutting sheets of steel and other metals to the correct dimensions.
  • Shear Operator, Forklift Operator, Punch Press & Forming Machine Operator.
  • Shear operator: Cut steel and aluminum down into different sizes.
  • Promoted to Shear Operator which is still my current position.
  • Shear operator, material handler, press brake helper.
  • Shear Operator, in training.
  • Shear Operator: Cut Metals (C.R.S., S.S., & Various other Metals - Pipes, Etc.)
  • Shear Operator: on 12,16 and 20ft.
  • Metal Fabricator I read blueprints and templates so I could cut metal as a manual shear operator to the correct specifications.
  • Run the shear when primary shear operator isnt here and handle the material
  • Shear operator, Warehouse worker, forklift, bobcat operator, .
  • Brake and Shear Operator-2 years Forklift Operator - 2 years
  • Shear Operator Hi-Lo Driver General Labor
  • Shear Operator/Hilo Driver, -shear sheet steel according to company prints.
  • Shear Operator Hot Abrasive Saw Operator Crew Leader
  • Certified shear operator Spot welding Read blueprints Operated Tow Motor
  • Press Brake Operator CNC Fabricator Shear Operator Fabricated custom parts per drawings Assembled air handling units per drawings
  • Shear Operator Hilo Driver and/or Forklift Operator Cut sheets of steel Package steel for shipping

Show More

37. New Construction
demand arrow
low Demand
Here's how New Construction is used in Sheet Metal Mechanic jobs:
  • Install standing seam metal roofing, fascia, gutter, coping, flashing and drip edge on new construction and remodeling.
  • Provide excellent in making deadlines to contractors, by installing duct work, and outside sheet metal to new construction jobs.
  • Coordinated sectioning, staging and rigging of air-duct systems and related equipment on several new construction projects.
  • Supervised various people in the installation and service of HVAC systems on new construction job sites.
  • Installed HVAC systems in residential and commercial buildings, including remodels and new constructions.
  • Installed Architectural Metal and metal roof on new construction of Whole Foods Inc. building.
  • Worked New Construction aboard the Nuclear Aircraft Carrier USS Gerald Ford CNV-78.
  • Completed tear down of existing structures and prepared for new construction.
  • Provide service, retrofit and new construction for commercial structures.
  • Install HVAC equipment and sheet metal in new construction homes.
  • Worked as a welder on new construction of naval vessels.
  • Installed air ducts in commercial buildings to include new construction.
  • Managed many jobs consisting of new construction and commercial work.
  • Experience on new construction as well as overhaul construction.
  • Installed metal coping on new construction.
  • Field locations include industrial settings such as power plants, school and hospital new construction and remodels.
  • Fabricate and install sheet metal ductwork, dampers, heaters and plenums in new construction.
  • Sheet Metal Worker * Installed Heating and Air Conditioning in new construction homes.
  • Install central hvac in new construction homes according to specifications.
  • Install heating and air conditoning units and ductwork New Construction

Show More

1 New Construction Jobs

No jobs at selected location

38. Corrosion Control
demand arrow
low Demand
Here's how Corrosion Control is used in Sheet Metal Mechanic jobs:
  • Corrected many discrepancy reports and engineering authority work documents, extensive corrosion control, and did many repairs.
  • Identify, coordinate, direct, and conduct maintenance and condition inspections of Corrosion Control, A.G.E.
  • Performed comprehensive modification of aircraft structures, as well as corrosion control and aircraft painting.
  • Completed removal of corrosion and treatment to prevent corrosion on the P-3 wing corrosion control
  • Coordinate, and direct subordinates in annual Vehicle Corrosion Control paint Program.
  • Performed corrosion control and organic coating procedures on aircraft and parts.
  • Performed corrosion control, flight cable adjustments, and prop angle checks
  • Perform corrosion control on structural sheet metal components of assemblies.
  • Inspected metal surfaces for corrosion and applied corrosion control treatments.
  • Performed inspections, and corrosion control procedures.
  • Completed 4-hour class on corrosion control.
  • Installed Interiors, floorboards, longerons; re-skinned and skinned aircraft bellies; performed corrosion control repairs on KC-135 and C-17.
  • overhaul and repair of C130 Aircraft, including Corrosion control and prevention IAW Air Force Tech Manuals.
  • Perform corrosion control and preparation of vehicles, and equipments for paint.
  • Accomplished corrosion control on centerline tanks.
  • Sheet Metal worker on various helicopter types Performed preventive corrosion control maintenance procedures Performed aircraft corrosion inspections
  • Sheet metal repair and modification Corrosion control Heavy D check, skin change Boeing A319 and 320, MD80
  • Performed mods on the engine necelle replacing longerons and performing corrosion control as required and directed.
  • Cleaned surfaces using approved methods; performed required corrosion control using alodine and zinc chromate.
  • Performed inspections/maintenance on CH-53 helicopters Sheet metal/fiberglass fabrication and repair Corrosion control CH-53E, CH-46, UH-1N, AH-1W and H-60 helicopters

Show More

1 Corrosion Control Jobs

No jobs at selected location

39. Structural Components
demand arrow
low Demand
Here's how Structural Components is used in Sheet Metal Mechanic jobs:
  • Performed extensive depot level modification, repair, and replacement of structural components.
  • Manufactured structural components with or without blueprints.
  • Repaired and replaced aircraft structural components.
  • Repaired and manufactured structural components and parts of aircraft using composite materials such as fiberglass, Kevlar, and carbon fiber.
  • Worked on structural assemblies and other structural components for nose, front / aft cabin, wings, and tail-cone.
  • Assisted mechanics with disassemble of aircraft sheet metal/structural components, (specifically engine nacelle side structures and tail rudders).
  • Removed, repaired, fabricated, replaced, modified, and installed aircraft parts and structural components.
  • Repaired aircraft structures and structural components during RESET and DEPOT maintenance on U.S. Army OH-58 aircraft.
  • Repaired and replaced structural components on naval aircraft Duties listed under professional and core work experience.
  • Assess damage to aircraft structural components, metal, composites, advanced composites and coatings.
  • Assembled and installed structural components and accessories, using hand tools and power tools.
  • Perform replacement, removal, repair and installation of aircraft structural components.
  • Major Structures: Deconstruct and repair, replace or modify Structural components.
  • Removed and wing planks forward and aft spars and inner structural components.
  • Assessed damage to aircraft structural components and low observable coatings.
  • Assess damage to aircraft structural components.
  • Trained and experienced in the use of cutting, crimping, de-bugging and fitting structural components.
  • Specialize in assembling & installing parts, structural components, & subassemblies to build wing assemblies.
  • Assembled aircraft structural components on Blackhawk and Chinook military aircrafts.
  • Repaired and replaced aircraft structural components to include stingers, longerons, bulkheads, beams and .

Show More

2 Structural Components Jobs

No jobs at selected location

40. Technical Manuals
demand arrow
low Demand
Here's how Technical Manuals is used in Sheet Metal Mechanic jobs:
  • Performed corrosion removal treated and sealed and identified metal cracks in accordance with technical manuals.
  • Utilized technical manuals to accomplish necessary work and documented maintenance in appropriate forms and records.
  • Inspected aircraft structure to ensure compliance with technical manuals and engineering specifications.
  • Installed major appliances according to specifications and technical manuals.
  • Research technical manuals and other sources of data to determine processes required for repair and/or replacement work and select needed parts.
  • Read and interpreted engineering drawings, technical manuals, structure repair manuals, understanding symbols, flags, and general notes.
  • Plan and lay out work in accordance with applicable technical manuals for repair and modification of aircraft metal parts and components.
  • Operate computer system to access technical data, repair manual, and other manual per FAA regulations per aircraft technical manuals.
  • Trained and expert in interpreting and analyzing administrative guides such as: technical manuals, schematics, and other documentation.
  • Utilized aviation design standards and technical manuals, technical orders, standard repairs, blueprints, and military specifications.
  • Evaluate maintenance task and equipment for compliance with technical manuals, safety standards, and operational policies.
  • Inspect incoming aircraft, identify proper and correct repairs, utilize technical manuals and engineering drawings.
  • Studied and interpreted the drawings, blue prints and the various technical manuals.
  • Followed technical manuals, blue prints, directives, and safety procedures.
  • Read and interpreted technical manuals, blueprints, and engineering drawings.
  • Repaired and fabricated parts from blueprints and technical manuals.
  • Blue Prints, Technical Manuals, or Engineering Orders.
  • Utilized technical manuals and blueprints to complete job.
  • Use of specific technical manuals.
  • Referred to manufacturer publications, IETMs, technical manuals, and Safety of Flight (SOF) messages .

Show More

4 Technical Manuals Jobs

No jobs at selected location

41. Different Types
demand arrow
low Demand
Here's how Different Types is used in Sheet Metal Mechanic jobs:
  • Build chimney caps, round dormers, louvers, light fixtures, and other items out of different types of metal.
  • Be tactful and courteous when receiving callers or interviewing people, and get along with different types of people.
  • Used various types of hand tools and hand-held power tools, along with different types of precision measuring equipment.
  • Handled power tools including arc and gas welding equipment and different types of saws following all safety regulations.
  • Learned where different types of alloys can be applied to aircraft in order to create desired results.
  • Worked with different types of rivets such as universal, flush head, flush shear heads.
  • Fillet seals, Faye sealing, and numerous amount of different types of operations.
  • Provided welding and the fabrication of different types of material by utilizing metal.
  • Skilled at using pneumatic riveter and all different types of rivet squeezes.
  • Sorted different types of metal to get melted down for stainless steel.
  • Fabricated different types of tooling such as carbon fiber and fiberglass.
  • Be able to identify different types of materials.
  • Operate different types of lifts.
  • Fabricated different types and guages of metal into different components in accordance with specifications provided.
  • Worked for several sheet metal companies learning all the different types of work involved in the sheet metal trade.
  • Help and other different departments and to make a different types from the shop.
  • Set appropriate stops and guides to specified lenghts for cutting different types of metals.
  • Used many different types of metals.
  • Metal Management * Worked with different types of metal * Placed metal in correct components
  • Contract) Responsibilities included: Assembling diffuser cases for several different types of jet engines

Show More

42. Rain Gutters
demand arrow
low Demand
Here's how Rain Gutters is used in Sheet Metal Mechanic jobs:
  • Measured, estimated, prepped, and installed seamless rain gutters and downspouts for private residences and industrial buildings.
  • Install rain gutters and fabricate downspouts and drainage systems
  • Install assemblies, such flashing, pipes, Heating/ AC ducts, rain gutters.
  • Metal sheets are used in air conditioning/heating ductwork, roofing, siding, rain gutters, & outdoor signs.
  • Installed General & segmented radius Drip edge, coping and Rain Gutters, downspouts ect.
  • Installed commercial kitchen hoods skylights, furnaces and rain gutters.Light bookkeeping,Delivered materials to job sites.

Show More

3 Rain Gutters Jobs

No jobs at selected location

43. Ventilation Systems
demand arrow
low Demand
Here's how Ventilation Systems is used in Sheet Metal Mechanic jobs:
  • Completed complex installations and modifications of ventilation systems in accordance with applicable drawings.
  • Perform modification and upgrades of ventilation systems in existing buildings.
  • Installed and removed temporary ventilation systems for Naval Nuclear Reactors.
  • Perform installation of aircraft carrier ventilation systems and furniture.
  • Installed ducting and ventilation systems to exact blueprint specifications.
  • Skilled in an assortment of hand tools, power tools, welding equipment, and cutting torches to install ventilation systems.
  • Installed commercial ventilation systems, 2nd Lead Man overseeing 4 personnel, laid out duct ventilation systems, and read blueprints.
  • Fabricate and construct ventilation systems from various metals, and sheet metals for commercial buildings.
  • Read blueprints, setting of offsets, hanging duct and setting of air ventilation systems.
  • Educated and trained in drafting, construction, and installation of ventilation systems.
  • Assemble and install air-conditioning ducts for central air conditioning, heating and ventilation systems
  • Directed engineering and planning input for on the job changes to ventilation systems.
  • Maintained air distribution and ventilation systems per HVAC guidelines.
  • Replaced overhead ventilation systems and air ducts.
  • Install A/C ventilation systems * Welding ventilation ducts
  • Installed commercial ventilation and air condition systems in restraunts and serviced existing ventilation systems.
  • Installed ventilation systems to exhaust smoke and fumes for a better breathing environment on government vessels and government buildings.
  • Installed, maintained and startup on residential, commercial HVAC systems to include duct work and ventilation systems.
  • Create , install and repair heating, cooling and ventilation systems.
  • Remove and replace ventilation systems Build bulkheads, berthings, desk, cabinets, foundations, hanger and studs.

Show More

44. Smooth Surfaces
demand arrow
low Demand
Here's how Smooth Surfaces is used in Sheet Metal Mechanic jobs:
  • Remove rough spots and smooth surfaces to fit, trim, or clean parts, using hand tools or power tools.
  • Trim, file, grind, buff, and smooth surfaces, seams, and joints of assembled parts.
  • Trimmed, filed, ground, deburred, buffed, and smooth surfaces using hand tools and air tools.
  • Trim's, file, grind, de-burr, buff and smooth surfaces, using hand tools or portable power tools.
  • Trim, file, grind, deburr, buff, and smooth surfaces, seams, and joints.
  • Grind, trim, debur, buff and smooth surfaces.

Show More

6 Smooth Surfaces Jobs

No jobs at selected location

45. Scissor Lifts
demand arrow
low Demand
Here's how Scissor Lifts is used in Sheet Metal Mechanic jobs:
  • Operated scissor lifts and cherry pickers to properly install hanging fixtures in rafters to mount HVAC units and Curbs on roofs.
  • Operate large construction machinery; up to, and including, forklifts, scissor lifts, and boom lift.
  • Hand tools /Breaks computer and manual /Sheers /Forklifts/Man lifts including boom lifts scissor lifts spider baskets and boatswain chairs
  • Operate different equipment such as: scissor lifts, heaters, air blowers, A/C units.
  • Operated aerial boom lifts, telescoping fork lifts, scissor lifts (electric and 4x4).
  • Skilled in the operation of scissor lifts, forklifts, bobcats and reciprocating boom lifts.
  • Can operate forklifts, scissor lifts, JLG man-lifts and other powered vehicles.
  • Certified operation of fork lifts, knuckle boom lifts and scissor lifts.
  • Operated fork lifts, scissor lifts and boom lifts.
  • Use of scissor lifts to hang duct every day.
  • Trained in forklifts and scissor lifts.
  • Operate lulls, scissor lifts, swing stage lifts, forklifts and back hoes.
  • Can operate boom lifts, scissor lifts, and fork lifts; rigging chain falls, come alongs and slings etc.
  • Operate heavy equipment such as grade-alls, scissor lifts, forklifts, and boom lifts.
  • Operate scissor lifts and boom lifts in a safe manner.
  • Operated scissor lifts and jlg boom and knuckle lifts.
  • Can operate sky tracks, snorkle lifts, scissor lifts, man lifts, set up scaffold, and pull trailers.
  • Installed air-handling equipment at Moraine Valley Community College Worked on building a health and fitness center Operated scissor lifts
  • Operated telehandler, jlg lifts, scissor lifts, etc.
  • Installed sheetmetal to ceiling at John's Deere in e Moline.20000 panels installed w/ jlg & scissor lifts .

Show More

46. Exhaust Systems
demand arrow
low Demand
Here's how Exhaust Systems is used in Sheet Metal Mechanic jobs:
  • Installed various types of sheet metal ducts, intake systems and exhaust systems on navy ships
  • Grease duct exhaust systems (Kiln hood, pizza oven & bakery oven exhaust).
  • Installed aluminum, stain less, fiberglass and exhaust systems.
  • Install stainless steal exhaust systems exposed.
  • Design and install make up units for supply and exhaust systems Submits and coordinates with engineer for required project materials.
  • Design, fabrication, and installation ofductwork and exhaust systems, general maintenance, and support of production
  • Utilized carpentry skills to cut and frame openings for ductwork and exhaust systems.
  • trouble shoot problems in all HVAC and EXHAUST SYSTEMS and resolve them.Formulate procedures to successfully setup and run these new systems.
  • Fabricate and install duct work according to blueprints Install units Install entire heating, cooling and exhaust systems

Show More

44 Exhaust Systems Jobs

No jobs at selected location

47. Heavy Machinery
demand arrow
low Demand
Here's how Heavy Machinery is used in Sheet Metal Mechanic jobs:
  • Read blueprints of items Prepared equipment for product production Operated heavy machinery
  • Constructed steel utility buildings * Heavy machinery operator
  • Operated forklifts and other heavy machinery safely.
  • Operate heavy machinery for production purposes.
  • Work with computer numeric controlled (CNC) heavy machinery from setup to operation to produce parts and tools from metal.
  • Experienced using heavy machinery such as metal rollers, lathes, Industrial breaks, plasma cutting tables and forklifts.
  • Read blue prints to cut all parts and assemble Ellison Cabs for Mills, and Heavy machinery equipment.
  • Assisted in operating heavy machinery including boom lift, and scissor lift.
  • Fabricated ventilation duct, welded sheet metal, and operated heavy machinery.
  • Operated heavy machinery to aid in construction of commercial air ducts.
  • Handled heavy machinery in order to cut metal material for customers.
  • Used heavy machinery in fixing/creating various parts for aircraft carrier.
  • Operated hand and power tools and heavy machinery safely.
  • Operated various heavy machinery on construction sites i.e.
  • Trained in the safe use of various heavy machinery, pneumatic tools and precision measuring devices.
  • Overhaul and repair of various metal shipping containers Heavy machinery operator Record keeping of repairs and sales
  • Work Experience Nailors Industries, Houston, Texas Skilled Laborer 2007 Heavy machinery operator.
  • Created and installed air ducts for HVAC systems Operated heavy machinery Operated a forklift
  • Metal fabrications Heavy machinery operating Operated forklift General labor
  • Removed and installed duct work Fabricated duct Installed registers Welded stiffeners and duct Operated all heavy machinery Journeyman

Show More

1 Heavy Machinery Jobs

No jobs at selected location

48. Technical Data
demand arrow
low Demand
Here's how Technical Data is used in Sheet Metal Mechanic jobs:
  • Repair structural discrepancies using applicable technical data.
  • Read and interpret blueprints, specifications and other technical data to ensure work meets stringent federal and military standards and specifications.
  • Complete installation of new primary and Secondary structure by use of SRM's, MM's and manufactures technical data.
  • Used maintenance instructions and technical data in the inspection, maintenance, and repair of assigned aircraft and associated equipment.
  • Performed Mod work on S-76 Assemble and disassemble parts and components in accordance with blueprints and technical data.
  • Interpreted applicable technical data; performed component repairs; demonstrated knowledge of fluids and gases in applicable systems.
  • Perform modifications to aircraft structures, and or panels according to blue prints, or other technical data.
  • Fabricated webs, stiffeners, and skins using drawings and technical data for Boeing KC-135 spoiler.
  • Read and interpret manufacture and aircraft maintenance manuals, service bulletins and technical data.
  • Read and interpret manufacturers' maintenance manuals and technical data for repair work.
  • Researched technical data and manufactured structural components, cables, and tubing assemblies.
  • Used technical data to diagnose and solve maintenance problems on aircraft systems.
  • Use technical data and drawing to locate part numbers and accomplish repairs.
  • Examine completed jobs to verify compliance to establish standards and technical data.
  • Performed C-130, UH-1, assembly in accordance with blueprints and technical data
  • Assembled brake, aileron, and elevator systems using technical data.
  • Review and revise blueprints and technical data provided by engineering.
  • Assembled aircraft parts according to blueprints and technical data.
  • Use, on a daily basis, of aircraft sheet metal tools, materials, processes, and technical data.
  • Perform technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or maufacturers manuals.

Show More

49. DC-9
demand arrow
low Demand
Here's how DC-9 is used in Sheet Metal Mechanic jobs:
  • Performed service bulletin modifications and C&D checks on Northwest Airlines DC-9 and DC-10; and Boeing 737 and B-727.
  • Worked on the DC-9 Northwest Project performing C and D checks, incorporating various structural repairs utilizing structural repair manuals.
  • Inspected airplanes for discrepancies during heavy checks and approved jobs completed by mechanics on B737-300, DC-8-60, DC-9-50.
  • Performed heavy overhaul and modification on B-727, DC-9, and DC-10 aircraft
  • Structure repairs C checks on DC-9 aircraft.
  • Assisted in completion of A and B checks on DC-8, DC-9, DC-10, MD-11 and A-300 aircraft.
  • Worked C&D checks aircraft worked DC-8, DC-9,727, A300, A320 worked with air tools
  • Performed C & D checks overhaul maintenance on DC-8, DC-9, DC-10, and composite
  • Performed C and D checks on DC-9, MD-80 and 747 aircraft.
  • Experience working on DAC DC-9, MD80, Airbus A300 and A310.
  • Performed cowling repairs on B737, DC-10, DC-9 and B727.
  • Performed aircraft Structure work on DC-9, DC-10,727,747, and MDf-80.
  • Repaired heavy aircraft - 727, 747, DC-9.
  • Contract: SMART Sheet-metal, c-check line on DC-9.
  • Experience working on DAC DC-9, MD88.
  • Performed major overhaul on DC-9, C-130, P-3, DC-10 and composite for Lockheed Martin Aircraft in Greenville, SC.
  • Performed modification of DC-9 engine cowling to accommodate hush hit working by blueprints Assembled light aircraft parts using blueprints and fixtures
  • Assigned to work in upper and lower airframes on B-737, 747, 757, 767, DC-9 and MD-80 aircrafts.
  • Contract Labor) Performed C-checks on DC-9's and MD-88's.
  • Performed tear downs on A300 aie bus [ ] DC-9 DC-10 MD-80 and MD-11.did daily inspections on all aircrafts

Show More

50. Fire Dampers
demand arrow
low Demand
Here's how Fire Dampers is used in Sheet Metal Mechanic jobs:
  • Installed Fire Dampers, Smoke Dampers, Air vent Shutters, Thermostats, Sensors, Blower Fan Motors, Fan Belts.
  • Install spiral and rectangular duct, fire dampers, rooftop AC units, roof curbs and build sheet metal transitions.
  • Field work, layout and hanging duct work, fabrication, install fire dampers, shipping and receiving.
  • Operated various machines used in the production of sheet metal fire dampers and duct work assembly parts.
  • Build Fire smoke dampers* Install Motors for Fire dampers* Work production line and assembly* Pull work orders
  • Installed Duct, VAV boxes, fire dampers and other ventilation components.
  • Installed fire dampers in the lines according to the prints.
  • Install fire dampers, VAV boxes, inferred heaters etc.
  • Installed fire dampers, spiral duct, round pipe.
  • Install fire dampers both vertical and horizontal.
  • Install duct, fire dampers & do layout's
  • Use blue prints to make lay outs for vav's, fire dampers, manual dampers, and automated dampers.
  • Installed hangers, ducts, fire dampers, and vavs according to blue prints.
  • Test out the fire dampers, exhaust fans louvers and etc.
  • Installed smoke detectors, fire dampers, air registers and linears.
  • Install duct and equipment -Install control wire and fire dampers
  • Job Description: Install HVAC mechanical sheet metal Assembled and installed duct work, installed fire dampers, and smoke detectors.
  • weather it was working on rectangular shaft exhaust fans, fire dampers, Rough in, or or finish work.
  • exhaust fans, fire dampers, .
  • Install ductwork, fire dampers, vav's, ahu' spiral duct, exhaust fans.

Show More

7 Fire Dampers Jobs

No jobs at selected location

Sheet Metal Mechanic Jobs

NO RESULTS

Aw snap, no jobs found.

20 Most Common Skills For A Sheet Metal Mechanic

Service Aircraft

22.3%

Customer Specifications

14.6%

Hvac

7.9%

Safety Procedures

6.8%

Hand Tools

6.4%

Layout

6.2%

Aluminum

4.1%

Job Site

3.2%

Supportive Frameworks

3.1%

Drill Press

3.1%

Stainless Steel

2.8%

Punch Press

2.8%

MIG

2.6%

Rivet Guns

2.3%

Air Compressors

2.2%

CNC

2.0%

Structural Repair

2.0%

Engineering Department

2.0%

Brake Press

2.0%

Tig

1.6%
Show More

Typical Skill-Sets Required For A Sheet Metal Mechanic

Rank Skill
1 Service Aircraft 17.6%
2 Customer Specifications 11.5%
3 Hvac 6.3%
4 Safety Procedures 5.3%
5 Hand Tools 5.0%
6 Layout 4.9%
7 Aluminum 3.3%
8 Job Site 2.5%
9 Supportive Frameworks 2.4%
10 Drill Press 2.4%
11 Stainless Steel 2.2%
12 Punch Press 2.2%
13 MIG 2.1%
14 Rivet Guns 1.8%
15 Air Compressors 1.7%
16 CNC 1.6%
17 Structural Repair 1.6%
18 Engineering Department 1.6%
19 Brake Press 1.6%
20 Tig 1.3%
21 Inspect Parts 1.2%
22 Osha 1.2%
23 Reference Lines 1.2%
24 Verbal Instructions 1.0%
25 Depot 0.9%
26 VAV 0.9%
27 Business Requirements 0.9%
28 Machine Shop 0.9%
29 Furnace Casings 0.9%
30 FAA 0.8%
31 C-130 0.8%
32 Assembly Sequences 0.8%
33 SRM 0.7%
34 Cessna 0.7%
35 Setup 0.7%
36 Shear Operator 0.6%
37 New Construction 0.6%
38 Corrosion Control 0.6%
39 Structural Components 0.6%
40 Technical Manuals 0.6%
41 Different Types 0.5%
42 Rain Gutters 0.5%
43 Ventilation Systems 0.5%
44 Smooth Surfaces 0.5%
45 Scissor Lifts 0.5%
46 Exhaust Systems 0.5%
47 Heavy Machinery 0.5%
48 Technical Data 0.5%
49 DC-9 0.5%
50 Fire Dampers 0.5%
{[{skill.rank}]} {[{skill.name}]} {[{skill.percentageDisplay}]}%
Show More

3,444 Sheet Metal Mechanic Jobs

Where do you want to work?

To get started, tell us where you'd like to work.
Sorry, we can't find that. Please try a different city or state.