Sheet metal welder jobs near me

Full-time Description Accurate Heating, Cooling and Plumbing is looking for Sheet Metal Journeyman. This position is based in Chillicothe, Columbus, & Dayton offices, as needed. WHO WE ARE For more than 4 decades, Accurate Heating, Cooling and Plumbing has been the HVAC contractor of choice for quality-minded customers in Central Ohio. Besides the fact that we have earned a reputation for being the best in the business, our mission statement says it all, “Become the Trusted Comfort Advisor for every Homeowner and Business in Ohio by applying Moral and Ethical business principles.” Our team prides itself on a true dedication to quality and unparalleled customer satisfaction. We don't want to hire for a job; we want to hire for a career. Sheet Metal Journeyman Job Description These duties are not all inclusive. Other duties may be assigned at any given time, based on the assigned job. Check drawing for conflict Understand other trades for coordination Properly size, cut, insulate and install metal duct runs Understand kitchen hoods, exhaust, welded ducts and make-up air systems Able to run an area of a project with little to no supervision along with a level 1 or 2 apprentice. Follow all company safety policies and procedures Display the ability to build a positive team attitude/morale in supporting installers. Create a positive/constructive atmosphere at the job site. Recognize and change, when possible, a poor customer relationship into a positive one. Able to run small jobs/phase of project with one installer and complete the job at or below budget/completion date Offer suggestions on value engineering jobs Maintain an open-minded approach to new ideas Provide feedback to management for installer evaluations Be familiar with operation sequence of equipment pertaining to the mechanical trade Work with project leader to develop an environment of efficiency and continuous improvement Coach/mentor apprentices 1-4 Develop measurable goals and tasks for installers and helpers Properly complete time cards weekly Requirements Sheet Metal Journeyman Qualifications Installers and technicians are subject to work in indoor and outdoor conditions. Those could include, but are not limited to; heat, cold, wind, rain, or snow. Installers and technicians are also subject to work in cramped, tight, dirty spaces or would be required to climb ladders. Aerial lift certification Crane lift and rigging certification BENEFITS PTO per Company Policy 6 paid holidays Health, Dental, Vision, STD, Life Insurance 401(k) plan, including company match 125 Plan EQUAL OPPORTUNITY EMPLOYER We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

WELDERS$20-$26/HR (DOE) | 1ST SHIFT Actively looking to hire skilled Welders for 1st shift positions. You'll be responsible for joining metal components using various welding techniques, reading and interpreting blueprints, and maintaining welding equipment. This role requires welding certification, experience with different welding processes, and a commitment to safety and quality. Join a reputable manufacturing team and showcase your welding expertise! HABLAMOS ESPANOL PERKS: Receive a weekly paycheck Early Pay Option Referral Bonus ($125 per person you refer) Full Time Position + Benefits BENEFITS: Health Insurance Vision Insurance Dental Insurance 401k HSA PTO At Employment Solutions, we work closely with both our employees and our clients. You, as a future employee, are someone we want to know. We want to learn about you, your interests and skills. With our clients, we get to know their environment, people and business. This is how we try to work so that we can create a positive experience and job for all parties involved. LET US HELP YOU FIND YOUR NEXT FAVORITE JOB! APPLY TODAY HERE!OR CALL/TEXT US TODAY at **************

Job Details Hebron, OH $21.45 HourlyDescription Legend Smelting & Recycling was founded in 1982 in Hebron, Ohio. For nearly 40 years, LSR has been a preferred buyer and processor of Platinum Group Metals from spent Catalytic converters and Dealers/Brokers of Non-ferrous Metals. Our business is built on a history of dedication, integrity, loyalty and long-standing customer relationships. LSR has locations across North America including Ohio, Indiana, Illinois, Michigan, Texas and California. PRIMARY RESPONSIBILITIES: Safe and efficient operation of catalytic converter press (40 hours of training provided) Complete press inspection at the beginning of the shift. Complete batch and daily paperwork accurately Clean up of area between batches and at the end of the day Qualifications QUALIFICATIONS AND REQUIREMENTS: Some experience a manufacturing or warehouse environment is preferred but not required Stable work history. MUST be able to lift up to 70 pounds regularly, stand for the entire shift, bend, squat, twist and turn MUST be able to pass a successful drug screen and background check Ability to work in a team environment and have a desire to assist in various duties and departments as needed

Wastequip has an immediate opportunity for a Welder to support our Container Pros operation. This is a full-time position with great benefits including but not limited to Health Insurance, 401K Plan, Paid Vacation/Sick time, and so much more. The ideal candidate will be a MIG Welder with prior experience of repair and refurbishment of steel containers. Shift Hours: 6:00AM - 3:30PM *(For the rest of 2025, hours will be from 6:00AM - 6:30PM, Monday-Friday, with occasional Saturdays) Physical address: 16007 W. Bellfort Blvd. Sugar Land, Texas 77498 Hourly pay: $27.76 Responsibilities Lays out, positions, and tack welds work pieces Welds along vertical, horizontal, and overhead weld lines Connects regulator valves to oxygen and fuel gas cylinders for cutting torch. Turns regulator valves to activate flow of gases, lights torch and adjusts gas mixture and pressure to obtain desired flame. Holds & guides torch at proper angle to cut metal Examines weld for bead size and other specifications Scarfs or grooves welds and parts Chips or grinds off excess weld, slag, or splatter Other duties as assigned Employee must regularly stand, walk, reach, stoop, lift, climb or balance, kneel, crouch, or crawl Employee must regularly lift and/or move up to 25 lbs., frequently lift and/or move up to 50 lbs., and occasionally lift and/or move 90 lbs. Specific vision abilities required include distance vision, close vision, peripheral vision, & depth perception Work on roll-off containers and trash compactors Qualifications High school diploma or GED 2+ years of MIG Welding experience and/or training preferred Experience welding on rusty material is a plus Must have fabrication experience/skills Must be mechanically inclined Must be able to operate a forklift to move equipment through the shop Ability to read and comprehend simple instructions, short correspondence, and memos Knowledge of basic math, tape measure reading, fractions & decimals Ability to understand and carry out detailed but uninvolved written or oral instructions Must be self-motivated Ability to read blueprints and measuring tape Experienced in a fast-paced production environment preferred Able to pass all EHS required tests and clearances Company Benefits: • 2 Medical Plan Options - Base HSA (High Deductible) and Buy-Up Medical Plans • Prescription (Rx) Insurance • Health Savings Account (HSA) • 2 Dental Plan Options - Base Dental and Buy-Up Dental Plans • Vision Insurance • Flexible Spending Accounts (FSA's) • Health Care FSA • Dependent Care FSA • Company Paid Base Life Insurance • Company Paid Accident, Death & Dismemberment Insurance • Company Paid Business Travel Accident Insurance • Company Paid Disability Insurance ▪ Short-Term Disability (STD) and Base Long-Term Disability (LTD) Insurance • Employee Assistance Program (EAP) • Voluntary Hospital, Accident & Critical Illness (Cancer) Insurance • 401(K) Retirement Plan with 50% Company Match • Voluntary Pet Insurance • Vacation and Personal/Sick Time • Paid Grandparent Leave • Paid Bonding Leave • Adoption Assistance • Education Assistance (Tuition Reimbursement) About Wastequip Wastequip got its start in 1989 with containers and compactors. But, today, we have evolved into so much more than just a manufacturer of high-quality steel containers and compactors. We are the waste industry's only All-in-One solutions provider - from carts and containers to collect waste to hoists and trash trucks to move the waste to parts, service and technology to keep your operation running smoothly. While we're proud to be North America's leading manufacturer of waste handling equipment, we are equally proud to be a driving force for enhanced sustainability across the waste industry. We are consistently striving to improve our own operations while making it easier for our customers to do the right thing - building a brighter future for all.

Welder / Fitters Needed in Columbus, Ohio A national company with a facility in the Columbus, Ohio area is currently seeking several Welder / Fitters for opportunities with their growing team. The position is a Direct Hire opportunity that offers long-term stable employment, opportunities for growth, and great benefits. Welder / Fitters rates are anticipated to start between $25 to $30 an hour based on each candidate's experience and education. All well-qualified candidates will be considered regardless of pay rate. We offer excellent benefits including great medical, dental, and Vision. Qualified Welder / Fitters will have most, if not all of the following skills and experience: 3+ years of MIG Welding, fitting, tacking, and welding steel components per blueprints and welding symbols using MIG welding and related fabrication tools. Must setup welding equipment, perform precision layouts, and ensure welds meet AWS D1.1 standards. Inspect parts for accuracy and quality; prepare and finish workpieces using grinders or other tools. Ability to pass AWS D1.1 3G weld qualification; blueprint reading skills required. Forklift and overhead crane experience. Must be able to work in the United States (No H-1 sponsorship or student visas considered). Must be able to complete standard pre-hire checks including background, drug screen, references, etc.

The Olen Corporation and Area Aggregates, one of the largest construction aggregates producers in the Midwest, has been a leader in the industry for over 50 years. With multiple locations serving Central, Northeast, and Northwest Ohio, Olen is dedicated to providing top-quality aggregate products, including natural sand, gravel, and limestone, to a diverse range of customers. As an ODOT 1069 prequalified aggregates supplier, Olen sets the standard for quality and service in the industry. Producing over 8 million tons of construction materials each year, Olen is a top thirty-five national producer of quality construction aggregates. Since 1986, Olen has partnered with Kokosing to be one of their top suppliers of construction materials. Committed to excellence, Olen is focused on delivering exceptional customer service while being responsible stewards of the environment and respectful neighbors in the communities we serve. Job Description: Entry- Level Field Welder SUMMARY The Olen Corp is seeking a full time Field Welder working on various pieces of mobile heavy equipment and fixed assets while maintaining our elite fleet of equipment. Travel to various job sites in our region with the ability to work with or without close supervision. Opportunities for continued growth with safety first mindset and attention to detail. ESSENTIAL DUTIES AND RESPONSIBILITIES: Clean work area and restock supplies and materials, as necessary. Assist in installation or assemblies in shop or field Layout and mark weld points on parts or subassemblies. Align components using calipers, rulers, etc. and clamp pieces. Analyze all welds to ensure they are free of porosity and discontinuities. Perform all work in accordance with established safety procedures. Operate laser welding equipment to fabricate and assemble materials based on job specifications. Fabricate, assemble, install, and repair mobile and fixed assets. Uphold policies and procedures to guarantee compliance with company and expectations. Lay out full scale drawings of pipe systems, support, and related equipment, following blueprints. Identify and tag material with written symbol for assembly and inspection. Perform job site housekeeping duties EDUCATION and/or EXPERIENCE Training and certification to weld. Experience with drawing, TIG Weld, C, 3G, GTAW, FCAW, and MIG Welding processes. Demonstrated dexterity and attention to detail. Will strive for continuous improvement on the job. A critical thinker with a demonstrated sound work ethic. Preferred one-year related experience and/or training with welding experience. Requirements Welding experience Valid driver license Excellent communication skills. Able to schedule your own daily, and weekly work and jobs. Flexible hours, Willing to work 50-60 hours a week and Saturdays during peak season. Willing to work outside in hot and cold weather Strong mechanical skills are needed to do repairs and maintenance. KNOWLEDGE, SKILLS AND ABILITIES Ability to read and interpret blueprints and technical drawings Knowledge of metallurgy, thermal dynamics and different types of metals Strong attention to detail for precision work and quality control Strong work ethic Proficient with various welding techniques Customer service Job site and vehicle housekeeping Required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl Lift and/or move up to 50 pounds. CERTIFICATES, LICENSES, REGISTRATIONS Driver's license with clean driving record Welding certifications preferred Olen offers a competitive compensation and benefits package including medical, dental, vision, company paid life, and disability insurance. We also provide competitive incentives to eligible team members, like paid time off and 401K plus match to reward our team members for staying committed to our customers and keeping safety a priority. Olen is an equal employment opportunity employer. The company does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected class.

6:00AM-8:00PM M-F Rumpke is a family-owned and operated company that ranks as one of the largest firms in the waste and recycling industry. Our mission is simple: to deliver exceptional waste and recycling solutions to our customers and communities through a commitment to safety, service, the environment and the growth of our people. When you join Rumpke, you'll be part of a team providing essential services to millions of residents, businesses, and neighborhoods. You will enjoy competitive pay and comprehensive benefits, including health, dental, vision, matching 401(k), life insurance, paid vacation, and more. This is your opportunity to make a difference for you and your family. Come join our team! Welders are responsible for repairing containers, fleet vehicles, compactor repairs in shop atmosphere and assisting with compactor installations in the field, along with other weldable materials by applying appropriate techniques and using various welding devices as needed. This includes fabricating, sanding, grinding, cutting, torching, drilling, welding and/or repair work on company and/or customer containers, compactors, and placing of containers or compactor equipment. Level of responsibility and repair work may vary by location. Responsibilities of Position: Perform sanding, grinding, cutting, torching, drilling, welding and other fabrication or repair work on company/customer containers, compactors, and assisting with placing of containers or compactor equipment Grind metal parts after welding Weld steel using MIG and ARC welding equipment Fabricate steel components on containers Cut steel using a plasma cutter, circular saw, band saw, chop saw, torch or nibbler Perform related work such as flame cutting, bending, forming, beveling, notching of metal and plastic parts Maintain a clean, safe work area in compliance with Company, ANSI, and OSHA standards Complete required paperwork utilizing computer systems Utilize standard shop hand tools, measuring devices, and equipment Install lids, wheels and lock setups on containers Paint repaired and/or new containers Assist with compactor installations as needed Assist in other projects or areas of the shop as needed Communicate in a manner that promotes good relationships with customers, clients, coworkers, and management Complete hydraulic component repairs as needed Use overhead crane lifting devices and aerial platforms as needed Perform other duties as assigned Supervisory Responsibility: This position will not manage employees Skills & Abilities Needed for Position: Excellent welding and mechanical aptitude Ability to learn cutting torch skills to use plasma cutter Knowledge of small shop tools Ability to operate a forklift/skid steer safely Experience & Knowledge Needed for Position: Knowledge of MIG/ARC and stick welding is preferred One (1) year welding and cutting experience or participation in or graduation technical training program, preferred Physical Requirements in a Regular Workday: Continuously lifting/carrying a max of 35 lbs Frequently lifting/carrying a max of 50 lbs Occasionally lifting/carrying a max of 100 lbs Continuously pushing/pulling a max of 20 lbs Frequently pushing/pulling a max of 75 lbs Occasionally pushing/pulling a max of 100 lbs Occasionally working outside in changing temperatures Frequently working in wet/humid conditions Frequently working in areas of dust, odors, mist, gases, and other airborne matter Frequently stooping/kneeling/crouching/crawling Frequently climbing and/or balancing Frequently sitting/standing/walking Additional Working Conditions/Aspects: Possible exposure to high traffic conditions and/or tight driving areas Exposure to residential and commercial waste Ability to travel between offices, as required Ability to work overtime, weekends, and/or holidays Legally eligible to work in the United States Valid driver's license (if applicable) Must successfully complete pre-employment testing Must be able to read and speak the English language This job description is intended to describe the general nature, complexity, and level of work to be performed by employees assigned to this position and is not to be construed as an exhaustive list of responsibilities, duties, and/or skills required. It does not prescribe or restrict the work that may be assigned. Furthermore, this does not establish an employment contract and is subject to change at the discretion of the company. Rumpke Waste and Recycling is committed to equality in all aspects of employment. It is Rumpke's policy to provide equal opportunities to all employees and potential employees without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Our Why: Pride in Every Weld. Our purpose is simple - to build trust with relentless quality and to empower every person by turning hard work into lasting opportunity. Our Mission: We engineer and manufacture precision wire mesh solutions that meet the highest standards of quality, safety, and performance. By aligning our expertise with each customer's specific needs, we build trust through consistent delivery, proven durability, and pride in every weld. Our Core Values: Craftsmanship - We take pride in precision and quality - every mesh we make reflects our skill and standards. Care - We value people and processes, protecting safety, promoting sustainability, and creating satisfaction at every step. Trust - We build lasting relationships through consistent quality, transparency, and reliability. Accountable - We own our work, honor our commitments, and deliver results you can count on. Empower - We grow together, investing in people and partners to innovate, improve, and lead with confidence. Our Perks & Benefits: Competitive pay Comprehensive medical, dental, and vision insurance plans 100% employer paid medical option available Short- and long-term disability insurance Life and AD&D insurance 11 paid company holidays Paid vacation time Paid sick leave 401(k) retirement plan with an employer match of up to 4% $5,000 undergraduate & $15,000 graduate annual tuition reimbursement In-house career growth development programs SHIFT: 3rd Shift Friday-Sunday 7pm-7:30am SUMMARY Responsible for reading and interpreting blueprints, sketches, or product specifications to determine sequence and methods of fabricating, assembling, and installing sheet metal products. PRIMARY RESPONSIBILITIES 1. Reads and interprets blueprints, sketches, or product specifications to determine sequence and methods of fabricating, assembling, and installing sheet metal products. 2. Plans, sets up, fabricates, assembles, installs, and repairs sheet metal parts, equipment, and products, utilizing knowledge of working characteristics of metallic and nonmetallic materials, machining, and layout techniques. 3. Trims, files, grinds, deburrs, buffs, and smooth surfaces, using hand tools and portable power tools. 4. Welds, bolts, rivets, screws, clips, or bonds component parts to assemble products, using hand tools, power tools, and equipment. 5. Keep assigned tools organized. 6. Perform assigned tasks in a timely and orderly manner. 7. Ensure quality of work. 8. Maintain safe work practices and environment. KNOWLEDGE AND SKILL REQUIREMENTS 1. Must have least 2 years of experience in sheet metal welding. 2. Must be able to use a micrometer, and a tape measure. 3. Heavy lifting (up to 60 pounds), bending, and stooping may be required. 4. Proficient with MIG/TIG welding techniques. 5. Ability to pass a weld test during the interview process. Competitive pay commensurate with skill set. An aptitude test is required for selected candidates.

Job Description At Thomas Door Controls, you are part of a team that has been serving Central Ohio with integrity and craftsmanship since 1949. We offer stability, hands-on training, and opportunities to grow your skills across a wide range of commercial door systems. Our team is supportive, professional, and proud to be known as Central Ohio's door experts. Here, you do not just open doors, you open opportunities for your future. What you'll do You'll independently fabricate, weld, and repair metal components used in commercial doors, frames, and related structures, ensuring every project meets quality and safety standards. You'll read and interpret blueprints, follow detailed specifications, and take ownership of delivering precise and durable work. You'll represent our company with professionalism, craftsmanship, and pride in every job. Each day will bring opportunities to problem-solve, work with your hands, and deliver exceptional results that strengthen customer relationships through reliable service and clear communication. The day-to-day Fabricate, weld, and repair a wide range of structural components, frames, and door systems for our customers. Read, interpret, and work from blueprints, drawings, and technical specifications. Operate welding and fabrication equipment safely and efficiently (MIG, grinders, torches, etc.). Conduct inspections of welds and finished products to ensure compliance with quality standards. Collaborate with team members or work independently depending on project requirements. Maintain tools, equipment, and a clean, organized work area. Always operate in a safety-conscious manner while performing job duties. What you'll need 2+ years of welding and fabrication experience (MIG) Ability to read and interpret blueprints, technical drawings, and shop orders. Strong mechanical aptitude and hands-on problem-solving skills. Excellent communication, teamwork, and organizational skills. Ability to lift and move heavy materials (up to 75 lbs) and work in varying conditions (indoor/outdoor job sites). What will help you on the job Experience working with overhead doors, industrial doors, or metal frames. Welding certifications (AWS or equivalent) are a plus. EEO Statement At Thomas Door, we are an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Seeking to create a welcoming and diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, ancestry, physical or mental disability, medical condition, marital status, genetics, age, or veteran status or any other applicable legally protected status or characteristic. If you would like to request accommodation on the basis of disability for completing this on-line application, please contact Human Resources.

Job Details Sutphen Corporation - Dublin, OH High School Sutphen Corporation is the oldest continuously family-owned and operated fire truck manufacturer in the United States of America. With a mission to build the safest, most reliable fire trucks in the world, Sutphen has manufactured emergency fire apparatus for fire departments all over the country for more than 135 years. Sutphen is seeking a temporary welder/fabricator to join our growing team in Dublin, Ohio. This role requires attention to detail, the ability to follow blueprints, produce strong, clean welds, and run various shop equipment, including a press brake. TIG welding experience preferred.

Wieland - Creating Value for Generations! Wieland is a global leader in copper and copper alloy manufacturing, processing, and distribution. We provide a large product and service portfolio including power, automotive, ammunition, coinage, construction materials, refrigeration, electronics and many other industries. To us, metal is more than material. Wieland's Cultural Values Wieland's culture is what makes for a fun and rewarding place to work! As a company, we benefit daily from our employees' knowledge and abilities. With our cultural vision, we place our core values at the heart of everything we do: safety, ambition, optimism, reliability, ownership, diversity, & respect. Wieland is hiring a Pressure Vessel Welders Level I, II, III. The Pressure Vessel Welder will be responsible for working from shop drawing, procedures or other written, verbal, or electronic instruction, perform a wide variety of operations associated with welded assembly of final product, sub-assemblies and components for products which includes adherence to ASME Code Safety Regulations. This role is located in Delaware, OH and will be fully on-site. Starting Pay: $27.23/hr., with compensation adjusted based on experience and qualifications. Schedule: 2nd shift Monday - Thursday (4:00pm - 2:30am) Training will be on 1st Shift (2-4 weeks) Monday - Thursday 6:00am-4:30pm Pay Schedule: Biweekly Responsibilities Pressure Vessel Welder Responsibilities: * Follow the production orders, prepare parts and weld components into assemblies. * Execute welds in accordance with company`s procedures and documents, while meeting defined quality standards. * Maintain a safe and organized working environment. * Properly maintain tools and equipment assigned to perform duties. * Identify and implement safety improvements. Pressure Vessel Welder-Level I Qualifications: * At least 1-3 year(s) experience or commensurate education from trade school. * Capable of MIG and TIG welding of parts and pipe, but not yet certified with the company for welding of parts under pressure. * Ability to read and apply WPS, read drawings. * Strong aptitude for problem solving and teamwork. * Methodical, organized, and precise. * Proactive in proposing solutions. Pressure Vessel Welder-Level II Qualifications: * At least 3+ years' experience in MIG and TIG welding of pipe or pressure vessels. * Experience and certification in welding in accordance to ASME standard - certified with the company for welding of parts under pressure. * Ability to read and apply WPS, read drawings. * Ability to troubleshoot and resolve minor issues related to fitting and welding components. * Strong aptitude for problem solving and teamwork. * Methodical, organized, and precise. * Proactive in proposing solutions. Pressure Vessel Welder-Level III Qualifications: * At least 5+ years' experience in MIG and TIG welding of pipe or pressure vessels (certified experience). * Experience and certification in welding in accordance to ASME standard. * Ability to read and apply WPS, read drawings, and teach others to do so. * Ability to troubleshoot and resolve issues related to fitting and welding components. * Strong aptitude for problem solving and teamwork. * Methodical, organized, and precise. * Proactive in proposing solutions. Qualifications Joining Wieland's team gives you… * Benefits - Including Medical, Dental, Vision, Disability, Life & more! * Retirement Savings - 401(k) contribution + match. * Work/Life Balance - Paid Vacation & Holidays. * Growth Opportunities - We have over 9,000+ employees worldwide and 40+ locations in North America alone. Growth opportunities are limitless! * Wellness Programs - Wieland encourages participation in our unique and personalized approach to wellness, where you are eligible to earn healthcare premium discounts as well as HSA employer contributions based on your status within the program. * Sustainability- Wieland continues to break ground with eco-friendly solutions and push the barrier in sustainability for future generations. Wieland is an equal opportunity and affirmative action employer. We celebrate diversity and are committed to fostering an inclusive environment for all employees. Come join Wieland today and help us continue to build a global corporation we are all proud to belong to.

Job Description Welder / Fitters Needed in Columbus, Ohio A national company with a facility in the Columbus, Ohio area is currently seeking several Welder / Fitters for opportunities with their growing team. The position is a Direct Hire opportunity that offers long-term stable employment, opportunities for growth, and great benefits. Welder / Fitters rates are anticipated to start between $25 to $30 an hour based on each candidate's experience and education. All well-qualified candidates will be considered regardless of pay rate. We offer excellent benefits including great medical, dental, and Vision. Qualified Welder / Fitters will have most, if not all of the following skills and experience: 3+ years of MIG Welding, fitting, tacking, and welding steel components per blueprints and welding symbols using MIG welding and related fabrication tools. Must setup welding equipment, perform precision layouts, and ensure welds meet AWS D1.1 standards. Inspect parts for accuracy and quality; prepare and finish workpieces using grinders or other tools. Ability to pass AWS D1.1 3G weld qualification; blueprint reading skills required. Forklift and overhead crane experience. Must be able to work in the United States (No H-1 sponsorship or student visas considered). Must be able to complete standard pre-hire checks including background, drug screen, references, etc.

Job Description Legacy Talent Search is currently seeking candidates for an Experienced Welder role in Marion, OH. Our client is a well-established industry leader known for innovation and a commitment to delivering the highest quality products. With a focus on continuous improvement, they pride themselves on maintaining excellence at every stage of their manufacturing process. Key Responsibilities: · Perform high-quality MIG and TIG welding, ensuring precision, reliability, and adherence to specifications. · Complete all welding setups independently, including machine adjustments and material preparation. · Read and interpret complex blueprints with exceptional accuracy. · Inspect completed welds for quality and structural integrity, making adjustments as needed. · Work collaboratively with the fabrication team to meet daily production goals and resolve operational challenges. · Maintain a clean, safe workspace while following all company safety protocols. · Operate fabrication tools and equipment as required to support production needs. · Report any equipment concerns, quality issues, or safety hazards promptly to supervisors. Qualifications: · AWS D1.1 Certification - MANDATORY · Must be proficient in both MIG & TIG welding and capable of performing their own setups. · Strong blueprint reading ability-must be highly intelligent and detail-oriented with technical drawings. · Ability to work Mon-Fri, 6:00am-2:30pm, with overtime as needed. · Excellent work ethic, communication skills, and teamwork mindset. · Ability to lift, stand, and work in a fast-paced fabrication environment. What We Offer: · Pay: $24+ per hour, depending on experience. · Competitive benefits package, including health insurance and paid time off. · Opportunities for career growth and advancement. · A supportive, inclusive workplace culture. · The opportunity to contribute your craftsmanship to a company known for quality and innovation. At Legacy Talent Search, we are more than just a staffing agency. We are dedicated to supporting the growth of the American economy and way of life, one job at a time. With a focus on rebranding the staffing industry, we work tirelessly to show how a specialized recruiting team can drive productivity. Our legacy is built on people and community-how we help others is how we leave our mark. Join us today and discover how we #recruitdifferently. Legacy Talent Search is an equal opportunity employer.

RESPONSIBILITIES Practice safe working habits and follow safety policy, procedures and Job Safety Analysis Ability to work towards continuous improvement of product quality welding following prescribed procedures Be able to position fabricated components in fit-up jigs and fixtures and use turning rigs when necessary Responsible for the high quality of product and good safety habits Responsible for the safety and training of others Responsible for compliance with all documented procedures and employee handbook Responsible for the quality and quantity of the finished product Responsible for creating and maintaining a working team environment Responsible for maintaining good housekeeping Responsible for performing routine preventative maintenance on associated equipment Responsible for safety, quality, and production with limited supervision Able and required to weld all products within the business unit Be willing to cross train and fill in as necessary in other department Any additional tasks as requested by the Team Leader QUALIFICATIONS Minimum of 1 year welding experience. Able to read assembles, and welds from blueprints. Prepares, assembles, and tacks weld parts and surfaces to be welded 7a-3:30p

Job Description Job Title: Welder/ Fabricator Company: Firelands Fabrication Reports to: Shop Supervisor FLSA: Hourly A Welder joins and shapes metal and other materials, and welds pieces of metal together. Essential Functions: Perform welding tasks using various processes such as GMAW, FCAW and stick (SMAW) welding. Read and interpret blueprints, welding symbols, and engineering drawings. Cut, shape, and assemble metal components to create structures or products. Perform all steel layout of secondary parts and holes. Tack welds all secondary parts to main steel member. Complete welding of all secondary pieces if required. Grind and wire wheel steel members. Other duties as assigned. Knowledge, Skills & Abilities: High School Diploma or equivalent. Proven experience as a Welder in a manufacturing or similar environment. Proficient in GMAW, FCAW & Stick (SMAW) welding techniques. Ability to obtain necessary welding certification. Perform work to meet AISC standards. Familiarity with reading and interpreting blueprints and welding symbols. operating overhead cranes and rigging knowledge. Strong attention to detail and precision in work. Welding certification is a plus. Physical stamina and ability to perform manual labor tasks. Working Conditions: The primary work location will be within a manufacturing facility equipped with modern machinery and tools. The facility is designed to provide a controlled environment for welding operations. General start and stop times vary depending on the project, but normally range from 6:00am-4:30pm, normally working four (4) 10-hour days. Occasional mandatory overtime is to be expected. About the Company JHI Group has two divisions, Janotta & Herner, and Firelands Fabrication. Janotta & Herner is northern Ohio's true design/build general contractor, headquarters in Monroeville Oh. Founded by an Architect and a Building Contractor in 1962, Janotta & Herner has embodied true Design Build Construction from the beginning. For more information, please navigate here. Firelands Fabrication is a 72,000 SF steel fabrication shop located in New London, Oh. Firelands Fabrication is dedicated to meeting all our client's structural and miscellaneous steel needs on time, on budget and to the highest quality standards in the industry. For more information, please navigate here. Benefits Overview: JHI Group offers a comprehensive benefits package including: Health, dental, life, and disability insurance Paid time off and paid holidays Employee Stock Ownership Plan (ESOP) 401(k) with match HSA, FSA & Dependent Care FSA Powered by JazzHR G3X09x6lC0

Job Title: Welder - 1st Shift Rittal is a leading global provider of solutions for industrial enclosures, power distribution, climate control, and IT infrastructure, as well as software and services. The company is a member of the Friedhelm Loh Group, a successful international player with 18 production plants, 80 subsidiaries, and 12,000 employees. Rittal LLC has built a strong tradition of innovation and takes pride in a progressive approach to engineering. We design and manufacture the world's leading industrial and IT enclosures, racks, and accessories, including high-efficiency, high-density power management, and climate control systems for industrial, data center, outdoor, and hybrid applications. Why work at Rittal: Opportunity for growth and training Benefit starts the 1st of the month after you start. Low cost & low deductible. Compensation: $23-27/HR based on experience Primary Activities/Duties: Perform MIG welding operations to support the production schedule. Weld base frames and other metal components according to specifications. Ensure all work is performed safely and in compliance with company standards. Meet or exceed targets for quality, productivity, and efficiency. Collaborate effectively with peers and supervisors to maintain workflow. Participate in weekly Rittal Production System (RPS) meetings. Continuously improve welding skills and overall competencies. Support and drive 6S activities to maintain a clean and organized work area. Perform other duties as assigned. Knowledge & Experience: High school diploma or GED strongly preferred. Minimum of 1 year of welding experience or completion of a certified welding training program. Ability to read and interpret blueprints is strongly preferred. Familiarity with basic welding tools, techniques, and safety procedures. Physical Requirements: Stand at the weld station throughout the work shift. Walk, bend, twist, and reach frequently during the shift. Occasionally lift up to 50 pounds to waist level; frequently lift 25-40 pounds to waist level and up to 25 pounds above the shoulders. Work in a fast-paced environment with the ability to adapt to changing assignments and multitask effectively. Safety Requirements: Wear Safety-toed footwear Safety glasses with side shields Hearing protection Welding hood and protective clothing Work Environment: Manufacturing and welding areas with exposure to heat, sparks, fumes, and noise. #WELD If you require reasonable accommodation for any part of the application or hiring process due to a disability, you may contact the company's Human Resources Department at **************. This option is reserved for individuals who require accommodation due to a disability. Rittal LLC and Eplan are proud to be an affirmative action/equal opportunity employer. EEO, including Disability/Vets.

6:00AM-8:00PM F-M Rumpke is a family owned and operated company that ranks as one of the largest firms in the waste and recycling industry. Our mission is simple: to deliver exceptional waste and recycling solutions to our customers and communities through a commitment to safety, service, the environment and the growth of our people. When you join Rumpke, you'll be part of a team providing essential services to millions of residents, businesses, and neighborhoods. You will enjoy competitive pay and comprehensive benefits, including health, dental, vision, matching 401(k), life insurance, paid vacation, and more. This is your opportunity to make a difference for you and your family. Come join our team! Welders are responsible for repairing containers, fleet vehicles, compactor repairs in shop atmosphere and assisting with compactor installations in the field, along with other weldable materials by applying appropriate techniques and using various welding devices. This includes fabricating, sanding, grinding, cutting, torching, drilling, welding and/or repair work on company containers, compactors, and placing of containers or compactor equipment. Level of responsibility an repair work may vary by location. Responsibilities of Position: Perform sanding, grinding, cutting, welding and other fabrication or repair work on company containers, compactors, and other equipment in a safe manner in compliance with all local, state, and federal regulations and company policies. Grinds metal parts after welding. Welds steel using MIG and ARC welding equipment. Fabricates steel components on containers. Cut steel using a plasma cutter, torch or nibbler. Perform related work such as flame cutting, bending, forming, beveling, notching of metal and plastic parts. Maintain a clean, safe work area in compliance with Company and OSHA standards. Completes required paperwork utilizing computer system. Utilizes standard shop hand tools, measuring devices, and equipment. Installs lids, wheels and lock setups on containers. Paints repaired and/or new containers. May assist in other projects or areas of the shop as needed. Maintain a positive work atmosphere by performing and communicating in a manner that promotes good relationships with customers, clients, coworkers, and management. Other duties as assigned. Skills & Abilities Needed for Position: Ability to perform physical requirements of the job (prolonged physical exertions, including standing, lifting, pushing, pulling, squatting, bending, kneeling, climbing, and working in awkward positions and tight areas). Excellent welding and mechanical aptitude. Knowledge of MIG/ARC and stick welding. Cutting torch skills; ability to use plasma cutter. Knowledge of small shop tools. Ability to operate a forklift safely. Additional Working Conditions/Aspects: Exposure to noise, heat, dust, and fumes as found in a repair or fabrication facility. Ability to work overtime, weekends and/or holidays. Legally eligible to work in the United States. Valid driver's license (if applicable). Must successfully complete pre-employment testing. Must be able to read and speak the English language. This job description is intended to describe the general nature, complexity, and level of work to be performed by employees assigned to this position and is not to be construed as an exhaustive list of responsibilities, duties and/or skills required. It does not prescribe or restrict the work that may be assigned. Furthermore, this does not establish a contract for employment and is subject to change at the discretion of the company. Rumpke Waste and Recycling is committed to equality in all aspects of employment. It is Rumpke's policy to provide equal opportunities to all employees and potential employees without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status or disability status

Job DescriptionDescription: Johnson Welded Products is a part of the Tramec family, which has facilities located throughout the United States. Along with competitive pay and a bonus program, we offer medical & RX, dental, vision, company paid life insurance, company matching 401(k), paid vacations, 10 paid holiday's, gym credit, $500 referral bonus, $2,000 perfect attendance bonus, company paid uniforms, RX safety glasses program, work boot program, tuition reimbursement, internal training opportunities, plus much more! Summary: We are seeking a MIG/TIG Welder specializing in steel and aluminum welding to join our dynamic team. The ideal candidate will have a strong background in welding both materials, with a focus on high-quality craftsmanship, precision, and safety. You will be responsible for reading blueprints, preparing welding surfaces, and executing welding tasks with attention to detail. Your expertise will contribute to the fabrication, maintenance, and repair of metal components and structures. Duties: Perform MIG and TIG welding on steel and aluminum, ensuring strong, clean, and accurate welds. Read and interpret blueprints, technical drawings, and specifications to determine welding requirements. Set up and operate welding machines and equipment, including pre-weld preparations like cleaning and cutting metal surfaces. Inspect welded components to ensure they meet company and industry standards, identifying defects and making necessary adjustments. Maintain equipment, tools, and the working environment, ensuring everything is in optimal working condition. Collaborate with team members to complete projects on time and according to specifications. Adhere to safety protocols and standards, wearing the required personal protective equipment (PPE) at all times. Perform post-weld operations like grinding surfaces as needed. Assist in troubleshooting and problem-solving related to welding processes or quality control issues. May be assigned other duties by management within reason. Job Types: Full-time, Part-time Pay: $20.00+ per hour, based on experience Expected hours: 40 - 50 per week Shift: 1st and 2nd shift availability Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance On-the-job training Opportunities for advancement Paid time off Prescription drug insurance $500 Referral program Tuition reimbursement Vision insurance Schedule: 10 hour shift 8 hour shift Monday to Friday Overtime Supplemental pay types: Double time pay Overtime pay Johnson Welded Products is an Equal Opportunity Employer. We participate in E-Verify. All individuals, upon an offer of employment, will be required to submit to a drug screen. Our Drug Free Workplace program follows the Federal guidelines (marijuana or medical marijuana are not permitted). Requirements:

Job Details Bremen, OHDescription $1,000 Sign on Bonus Westerman, an employee-owned company, is a multiple site manufacturer of production and storage equipment within the oil, gas, and nuclear industries. Our equipment helps optimize well pad design, improve separation efficiency and lower overall equipment spend through high-performance surface separation and processing technology. Our equipment is setting new standards for performance and economics nationwide. SUMMARY The Welder is responsible for set-up and operation of advanced welding equipment. This position uses expertise to solve problems and eliminate scrap, rework and downtime while effectively repairing defective products. The appearance of the repair work must be at an acceptable level and meet high quality standards. The Welder is also responsible for making sure all work is done to specification. A successful candidate is a self-motivated multi-tasker that utilizes a strong work ethic to ensure all quality levels are met. This is a safety sensitive position. PRIMARY RESPONSIBILITIES: Regular and punctual attendance at work is an essential job function of each position and is necessary to your individual effectiveness and that of your work group. Regular and punctual attendance is required of all employees. Read specifications or blueprints to determine the locations, quantities, or sizes of materials required. Bolt aligned structural steel members in position for permanent riveting, bolting, or welding into place. Fasten structural steel members to hoist cables, using chains, cables, or rope. Hoist steel beams, girders, or columns into place, using cranes or signaling hoisting equipment operators to lift and position structural steel members. Cut, bend, or weld steel pieces, using metal shears, torches, or welding equipment. Force steel components into final positions, using turnbuckles, crowbars, jacks, or hand tools. Pull, push, or pry steel components into approximate positions for bolting into place. Unload and position prefabricated steel units for hoisting as needed. Assemble hoisting equipment or rigging, such as cables, pulleys, or hooks, to move heavy equipment or materials. Fabricate metal parts, such as steel frames, columns, beams, or girders, according to blueprints or instructions from supervisors. Dismantle structures or equipment. Welding of separators, glycol absorbers, piping large and heavy wall vessels and flow coils. Must be able to perform quality x-ray welds on a consistent basis. Welding low pressure products such as heaters, reboilers, glycol coolers, liquid accumulators, building skids and natural draft combustors Lays out, positions, and secures parts and assemblies according to specifications, using straightedge, combination square, calipers, and ruler Tack-welds or welds components and assemblies, using electric, gas, arc, or other welding equipment Cuts workpiece, using powered saws, hand shears, or chipping knife Melts lead bar, wire, or scrap to add lead to joint or to extrude melted scrap into reusable form Installs or repairs equipment, such as lead pipes, valves, floors, and tank linings Observes tests on welded surfaces, such as hydrostatic, x-ray, and dimension tolerance to evaluate weld quality and conformance to specifications Inspects grooves, angles, or gap allowances, using micrometer, caliper, and precision measuring instruments Removes rough spots from workpiece, using portable grinder, hand file, or scraper Welds components in flat, vertical, or overhead positions Single hand welding Pipe Fitting Performs other related duties as required and assigned. KNOWLEDGE, SKILLS, AND ABILITIES : Attention to detail and ability to make clean lines and cuts when welding Read and interpret blueprints; understand how the final product should look Identify flaws in welds or structural imperfections in the metal Determine the kind of tools and equipment needed to do a job Conduct tests and inspections of products, services, or processes to evaluate quality or performance Perform routine maintenance on equipment and determining when and what kind of maintenance is needed Knowledge of the properties and characteristics of metals used for cutting, welding and forming objects and of various welding fluxes and rods. Knowledge of safety precautions related to occupational hazards, procedures and practices of the trade. Skilled in identifying the proper power and hand tools in the safest possible manner and various equipment. Qualifications QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty or responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. TO BE CONSIDERED FOR A WELDER 2 POSITION: EDUCATION High School Diploma or equivalent MINIMUM REQUIREMENTS At least 1 year welding experience Must be able to clear a weld assessment screening, including 3G Plate and 2 processes with visual and bend acceptance PHYSICAL DEMANDS/ WORK ENVIRONMENT: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Must be able to sit or stand for extended periods of time, up to entire length of shift. Must be able to exert moderate to heavy physical effort with lifting requirement up to 50 pounds. Must have strong range of motion. Must be able to sit, stand, reach, stoop, kneel, crouch, climb, and bend. Must be able to see, speak, hear, and read. Must be able to read instructions and all measuring devices. Must use fingers and hands to manipulate tools and small parts. Must be able to walk over both even and uneven surfaces. Must be able to work in extreme temperatures, both hot and cold. Must be able to wear appropriate PPE including seatbelt. Must be physically able to access all areas of the plant and grounds. Some aspects of this position may require working in tight quarters. Some aspects of this position may require close vision, depth perception, the ability to see small detail, and the ability to adjust focus.