Maintenance Supervisor jobs at Sherwin-Williams

This position is an essential part of Sherwin's manufacturing team. This position is responsible for installing, troubleshooting, repairing, and maintaining production and facility equipment to support production requirements and goals. Equipment may include: dryers, chillers, thermal oxidizer, HVAC, fire pump, mixers, mills, filling line equipment, conveyors, wrappers, tanks, motors, pumps, tank washers, tank tipper, as well as dock and building maintenance, etc. This position performs various maintenance tasks as assigned and is responsible for maintaining a safe, clean, and productive working environment. Additional Information 1st Shift This position is also eligible for bonus based on performance and subject to the terms of the Company's applicable plans. Job duties include contact with other employees, operating heavy machinery, and access to proprietary information, raw materials, finished merchandise, and/or other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company's staff, employees, and vendors.

The Opportunity: Avantor is seeking a Maintenance and Reliability Supervisor to oversee facility maintenance activities. The Maintenance Supervisor's work involves complete maintenance control over designated areas and they will report to the Reliability Maintenance Engineering Manager. This is a full-time position based out of our Carpinteria, CA office with occasional travel to support other sites as needed. What we're looking for: Education: HS diploma or equivalent degree. A degree in mechanical, instrument/electrical, or another relevant discipline (preferred). Experience: Minimum of 5 years' experience in facility maintenance. Certifications: Certification in Reliability (CRL, CMRP, etc.) desired. Additional Qualifications: Must understand the RCM process, Failure Mode Identification, Defect Analysis, Cause and Effect Analysis, Loss Elimination, use sFMEA, RCFA Decision Logic, and FRACAS. Must understand ISO 55000 Asset Management. Expertise in CMMS best practices. Full understanding of strategic maintenance planning and scheduling activities Management and leadership skills. Budget planning skills. Good communication and reporting skills. Ability to communicate/teach/coach reliability best practices, condition monitoring, and precision methods. How you will thrive and create an impact: Supervise and ensure the safety of Maintenance employees. Oversee all maintenance activities in their area of the facility. Perform routine and turnaround maintenance and plant modifications. Evaluate and analyze products, components, materials, and equipment for the purpose of understanding and predicting failures. Review product designs, material specifications, and manufacturing capability to predict reliability and dependability. Create prototypes and conduct product tests to gather reliability data. Interpret test results and recommend solutions using appropriate statistical distributions and reliability models. Recommend product design changes or alterations in manufacturing processes and controls to ensure achievement of required reliability levels. Monitor production equipment diagnostics and review maintenance record in order to predict and prevent equipment down times. Document findings, including results of root cause analysis, and facilitate the implementation of necessary changes to ensure product and/or equipment reliability levels are maintained. May determine maintenance requirements and schedules for products and equipment. Ensure maintenance resources provide an effective, efficient, and cost-effective execution of maintenance schedules across the work area. Manage the area maintenance budget. Account for the maintenance functions in their area and take necessary action to ensure that key performance targets are met. Ensure that workforce is allocated to areas of responsibility in the most effective manner. Ensure supervisory support is provided to carry out Weekly, Daily, and Shutdown Schedules. Monitor key performance indicators (KPIs) and take appropriate corrective action. Approve purchase requisitions for direct purchase of materials promptly. Monitor execution of best practices to ensure compliance and take appropriate corrective action as necessary (with Operations Management). Follow up on Root Cause Analysis (RCA) recommendations to ensure corrective actions are taken promptly (with Operations Management). Define priorities for the area (with Operations Management). Define and update the 12-Month and 8-Week Event Schedules (with Operations Management). Identify work (early) to be done during scheduled shutdown events. Identify appropriate goals and objectives for each shutdown. Other duties as assigned. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer. Why Avantor? Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science. The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor. We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today! Pay Transparency: The expected pre-tax pay for this position is $85,000.00 - $141,600.00 Actual pay may differ depending on relevant factors such as prior experience and geographic location. EEO Statement: We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at ****************************** and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. For more information about equal employment opportunity protections, please view the Know Your Rights poster. 3rd Party Non-Solicitation Policy: By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22821 Employment Status: Hourly Full-Time Function: Maintenance Req ID: 27095 Purpose Ability to machine, mill, and grind various types of metals. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Maintenance Machinist A. Reports directly to the department Manager. Job Responsibilities Performs all tasks under general supervision. Provides training and assistance to less experienced Machinists. Assumes ownership of work task and demonstrates initiative to get work completed. Creates and reworks machinery and equipment components according to requisition documentation, blueprints, or other drawings. Sets up equipment operation feed, speed and temperature. Follows established procedures for operating various conventional and/or CNC (computerized numerical control) manufacturing equipment for tasks such as cutting, punching, forming, drilling, tapping, turning, milling, grinding, and stamping to fabricate, form or shape manufactured parts, tools or parts assemblies from raw materials. Selects and measures raw materials and parts to specifications to prepare for production processing. Performs reworking and machining of new and spare production parts for departments. Repairs maintenance parts as needed. Verifies the accuracy of work by using calipers, micrometers, dial indicators, and various measuring instruments. Order and maintain project related material as required. Assist with keeping neat and orderly records on work performed and repairs made. Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager Basic Requirements Must pass the skilled trade assessment test for this position. Must have a basic knowledge and experience reading mechanical drawings. Must have a basic knowledge and experience in proper machining and grinding techniques (Feed rates, sequencing, cutting speeds). Must have a basic knowledge and experience in setting up machine tools to produce precision parts. Must have a basic knowledge and experience in writing and modifying machine programs. Must be able to use math to calculate dimensions and determine speeds and feed rates. Ability to use various measuring devices (calipers, micrometers, dial indicators, etc.) Excellent attendance required. Must possess basic mechanical aptitude. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Maintenance and Reliability Director Build Your Career with an Industry Leader As the global leader of premium labels, Multi-Color Corporation (MCC) helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing expertise, MCC is focused on the future-developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. Position Objective The Maintenance and Reliability Director will focus on the deployment of Total Productive Maintenance (TPM) across Multi-Color Corporation in the Americas. This hands-on leadership role oversees a team of four and drives the implementation, execution, and continuous improvement of TPM principles across 38 manufacturing facilities. The Director enhances equipment reliability, operational efficiency, and fosters a culture of safety, quality, and continuous improvement. Key priorities include developing and executing the TPM framework, training and coaching plant staff, facilitating improvement projects, driving standardization and digital transformation, and ensuring alignment with MCC's business priorities Why Work at MCC Competitive compensation Comprehensive benefits package including medical, dental, vision, disability, life insurance, and 401(k). Paid holidays including New Year's Day, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Christmas Eve, and Christmas Day. Opportunity to lead TPM transformation across a global network and make a lasting impact on MCC's operational excellence journey. Responsibilities Lead and execute the transformation and sustainability of the Total Productive Maintenance (TPM) program across the Americas organization. Develop and deploy TPM strategies aligned with corporate and divisional goals, ensuring long-term operational stability and reliability. Serve as a change agent to lead individuals and teams through TPM implementation and culture transformation. Train, mentor, and coach site leadership teams and maintenance personnel on TPM principles, tools, and methodologies. Identify, prioritize, and manage improvement projects to enhance process yield, reliability, and operational efficiency; ensure visual TPM compliance in War Rooms and at points of impact. Support plants in data-driven decision-making-using root cause analysis, condition-based monitoring, and predictive analytics to improve performance. Collaborate with cross-functional partners including Operations, Engineering, and Corporate Leadership to align TPM with business strategies. Develop and maintain standardized documentation and methodology to ensure consistent TPM deployment across all MCC sites. Promote a strong safety culture and ensure TPM integration with plant safety systems and risk mitigation initiatives. Manage department budgets, allocate resources effectively, and track performance to business priorities. Required Skills and Qualifications Bachelor's degree in Mechanical, Electrical, Chemical, or Industrial Engineering (or related field). Eight or more years of experience leading Maintenance and Reliability programs, with proven TPM deployment expertise. Strong working knowledge of Total Productive Maintenance (TPM) principles, strategies, and tools. Expertise in Computerized Maintenance Management Systems (CMMS). Proven leadership and coaching skills; ability to develop high-performing teams and influence across a matrix organization. Experience in Lean and Continuous Improvement methodologies for process optimization. Strong analytical and problem-solving skills; able to analyze data, identify risks, and make data-driven decisions. Excellent communication and collaboration skills; able to engage and influence stakeholders at all levels. Technical aptitude to integrate new technologies and digital solutions into maintenance practices. Proficient project management skills to plan, execute, and deliver cross-site improvement initiatives effectively. Ability to travel up to 75% (domestic and international as required). Diversity & Inclusion: Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law. If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. #AppcastOPT For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Supervisor to join our UniFirst community! As the Maintenance Supervisor you will ensure all facility equipment is efficiently functioning and identify areas to improve processes, procedures, maintenance practices and on-going training for all maintenance staff. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime. We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Diagnose mechanical and electrical problems and determine corrective action by checking blueprints, schematics, repair manuals and parts catalogs. Inspect, operate, and test machinery and equipment to diagnose machine malfunctions. Performing basic welding activities to effect repairs on facilities and equipment. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Perform and assign all preventive maintenance on facility and production assets. Follow blueprints, schematics, operations manuals, manufacturer's instructions, and engineering specifications using a documented schedule. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Manage and assign all equipment maintenance, including repairs which cannot be completed during standard hours. Assume responsibility for all shifts in the maintenance department. Oversee and implement all maintenance related regulatory and environmental compliance requirements. Assume responsibility for all aspects of safety within the maintenance department. Perform Confined Space and Lockout / Tagout procedures where appropriate. Monitor training status of technicians and provide time for required training as needed. Utilize a Computerized Maintenance Management System. Partner with the Production Manager to develop, manage and maintain budget for building, equipment, capital expenditures and parts/labor. Train and develop maintenance partners. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school and/or GED is preferred. Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age. Valid driver's license and a safe driving record are required. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Knowledgeable in maintenance equipment. This includes wiring, electrical, mechanical, electronic components, pipe systems and plumbing required. Minimum of 3 years of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Minimum of 2 years of experience supervising maintenance personnel is preferred. Maintenance administration experience including planning, scheduling, budgeting, negotiating, parts management, vendor management, maintenance management systems is required. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Proficiency in Microsoft Office skills is required. Experience in Hand & Power tools is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Supervisor to join our UniFirst community! As the Maintenance Supervisor you will ensure all facility equipment is efficiently functioning and identify areas to improve processes, procedures, maintenance practices and on-going training for all maintenance staff. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime. We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Diagnose mechanical and electrical problems and determine corrective action by checking blueprints, schematics, repair manuals and parts catalogs. Inspect, operate, and test machinery and equipment to diagnose machine malfunctions. Performing basic welding activities to effect repairs on facilities and equipment. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Perform and assign all preventive maintenance on facility and production assets. Follow blueprints, schematics, operations manuals, manufacturer's instructions, and engineering specifications using a documented schedule. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Manage and assign all equipment maintenance, including repairs which cannot be completed during standard hours. Assume responsibility for all shifts in the maintenance department. Oversee and implement all maintenance related regulatory and environmental compliance requirements. Assume responsibility for all aspects of safety within the maintenance department. Perform Confined Space and Lockout / Tagout procedures where appropriate. Monitor training status of technicians and provide time for required training as needed. Utilize a Computerized Maintenance Management System. Partner with the Production Manager to develop, manage and maintain budget for building, equipment, capital expenditures and parts/labor. Train and develop maintenance partners. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school and/or GED is preferred. Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age. Valid driver's license and a safe driving record are required. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Knowledgeable in maintenance equipment. This includes wiring, electrical, mechanical, electronic components, pipe systems and plumbing required. Minimum of 3 years of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Minimum of 2 years of experience supervising maintenance personnel is preferred. Maintenance administration experience including planning, scheduling, budgeting, negotiating, parts management, vendor management, maintenance management systems is required. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Proficiency in Microsoft Office skills is required. Experience in Hand & Power tools is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech II to join our UniFirst community! As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. Compensation: $30.07 - $45.11 Hourly Pay What you'll be doing: Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Assist other maintenance personnel with emergency and non-emergency repairs. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Perform daily and weekly safety checks on boilers and make necessary repairs as required. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Performing basic welding activities to effect repairs on facilities and equipment. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Knowledgeable in industrial maintenance of facilities and equipment. Minimum of 1 year of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Valid driver's license and a safe driving record are required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Utilize hand/power tools, precision measurement tools, and electronic testing devices. Ensure safe operation of machinery, mechanical electrical, pneumatic, and hydraulic systems and components. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required Perform daily and weekly safety checks on boilers and make necessary repairs as required. Record and analyze meter readings of utilities in long and take corrective actions when necessary. Perform daily and weekly location/system safety checks and follow up to address concerns. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Valid driver's license and a safe driving record are required. Knowledgeable in maintenance equipment. Minimum of 6 months' work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment test to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech II to join our UniFirst community! As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Assist other maintenance personnel with emergency and non-emergency repairs. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Perform daily and weekly safety checks on boilers and make necessary repairs as required. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Performing basic welding activities to effect repairs on facilities and equipment. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Knowledgeable in industrial maintenance of facilities and equipment. Minimum of 1 year of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Valid driver's license and a safe driving record are required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

New Hire Incentive Bonus! UniFirst's Kansas City, MO location is now offering an incentive bonus for $2,500 new hires. The following guidelines must be met to be eligible: New hire must reach 90 days of employment to receive the full incentive bonus. New hire must abide by UniFirst's 90-Day Probationary Period. This includes meeting UniFirst's attendance and performance policy. New hire must not have been previously employed by UniFirst. Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech II to join our UniFirst community! As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Assist other maintenance personnel with emergency and non-emergency repairs. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Perform daily and weekly safety checks on boilers and make necessary repairs as required. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Performing basic welding activities to effect repairs on facilities and equipment. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Knowledgeable in industrial maintenance of facilities and equipment. Minimum of 1 year of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Valid driver's license and a safe driving record are required. Ability to lift up to 80 lbs. The estimated hourly pay for this position ranges from $35.00 to $37.00 per hour. Actual compensation will vary based on factors including but not limited the candidate's skills, experience, and qualifications. Geographic differentials may apply depending on the position's location. There is no application deadline for this role; recruitment will remain open until the position is filled. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Compensation: $20.00 - $28.00 per hour (US Dollars) The pay listed is the hourly rate for this position. Any specific offer will vary based on the successful applicant's education, experience, skills, abilities, geographic location, and alignment with market data. You may be eligible to participate in a Company incentive or bonus program Benefits: ABM offers a comprehensive benefits package. For information about ABM's benefits, visit ABM Employee Benefits | Staff & Management Position Summary: We are looking for a dynamic individual to join our team supporting a higher education campus environment with multiple locations. This role involves weekly and bi-weekly travel to two additional campus sites, and a company vehicle will be provided for travel. In addition to general maintenance tasks, this position requires experience with snow removal and carpentry. The Maintenance Technician will perform duties such as changing light bulbs, cleaning spills, emptying trash, light mechanical maintenance, and carpentry repairs. They will also do regular housekeeping to keep areas clean and safe, and report safety hazards and larger maintenance problems to the customer. Flexibility and willingness to complete all assigned tasks are essential. Shift: Monday - Friday 7:00AM - 3:30PM Essential Functions: Repair and maintenance of restroom and breakroom plumbing fixtures. Clearing drains by means of plunger and hand-held auger. General labor, such as carrying, stacking, organizing materials used in and around the job site. Carpentry work including minor repairs, installations, and adjustments to furniture and fixtures. Perform snow removal duties as required during winter months. Maintaining and/or replacing door hardware. Repair / replacement of venetian blinds. Maintenance painting in mechanical and electrical rooms. Touch up painting in building common areas. Touch up painting in tenant spaces when authorized by property management. Cleaning and painting of non-operating mechanical equipment which has been shut down, locked out and tagged by a Journeyman Engineer in accordance with ABM Lockout / Tagout Program. Miscellaneous handyman work requiring the limited use of hand tools. Cleaning roof drains, air vents, registers and radiators. Replacing lamps and cleaning light fixtures. Ballast replacement per ABM Lockout / Tagout polices. Replacing ceiling tiles. Floor tile replacement. Replacing air filters. Replacing fire extinguishers. Hanging framed objects not requiring the use of power tools other than cordless drill Complies with client and internal ABM processes and policies Perform other duties as assigned Minimum Requirements: Ability to travel weekly and bi-weekly to other campus locations (company vehicle provided). Must have a current and valid Driver's License Experience in an office facilities environment is desired Must have working knowledge of OSHA safety standards and regulations Excellent organizational skills and attention to detail Ability to adjust work schedule as needed to support the operation Proficient in Microsoft Office Previous custodial experience desired Able to stand up to 10 hours per Able to climb ladders #LI-AH1 #200 About Us ABM (NYSE: ABM) is one of the world's largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM's comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries - from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit ******************* ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call ************. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you'll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you're looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ******************* ABM does not accept unsolicited resumes.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Utilize hand/power tools, precision measurement tools, and electronic testing devices. Ensure safe operation of machinery, mechanical electrical, pneumatic, and hydraulic systems and components. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required Perform daily and weekly safety checks on boilers and make necessary repairs as required. Record and analyze meter readings of utilities in long and take corrective actions when necessary. Perform daily and weekly location/system safety checks and follow up to address concerns. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Valid driver's license and a safe driving record are required. Knowledgeable in maintenance equipment. Minimum of 6 months' work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment test to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Utilize hand/power tools, precision measurement tools, and electronic testing devices. Ensure safe operation of machinery, mechanical electrical, pneumatic, and hydraulic systems and components. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required Perform daily and weekly safety checks on boilers and make necessary repairs as required. Record and analyze meter readings of utilities in long and take corrective actions when necessary. Perform daily and weekly location/system safety checks and follow up to address concerns. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Valid driver's license and a safe driving record are required. Knowledgeable in maintenance equipment. Minimum of 6 months' work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment test to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

The General Maintenance Technician will complete assigned preventive maintenance and reactive maintenance to equipment and facilities in a safety-conscious and team-oriented environment. The candidate will need to have a general understanding of mechanical, plumbing, electrical, painting, HVAC, and housekeeping of mechanical areas. Location: Gulfstream Facilities, Savannah, GA Pay: $18 - $27/hour The pay listed is the salary range for this position. Any specific offer will vary based on the successful applicant's education, experience, skills, abilities, geographic location, and alignment with market data. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM's benefits, visit ABM ABM 2025 Employee Benefits (Frontline) | Programa de Beneficios de ABM (2025) Essential Functions: Troubleshoots minor maintenance problems involving electrical, structural, plumbing, and equipment repair or replacement. Performs routine plumbing repairs such as unstopping toilets, sinks or urinals, fixing water leaks, leaking faucets, and water fountains. Complete assigned preventive maintenance and reactive maintenance repairs requiring conveyor, mechanical, plumbing, electrical, instrumentation, HVAC and other equipment, systems or structures Performs routine electrical repairs such as changing light bulbs or fluorescent lamps and assists in repairing ballast and light fixtures. Performs routine HVAC filter changes. Completes assigned preventive maintenance and reactive maintenance. Responsible for housekeeping of mechanical areas as well as other equipment, systems or structures. Willingness to Work at Various Heights: The ideal candidate must be comfortable working in elevated environments. This includes tasks that may require being at different heights for extended periods. Ladder Climbing: Regular climbing of ladders is a critical part of this position. The candidate must be capable of safely ascending and descending ladders of various sizes and types. Utilizing Various Lifts: Proficiency in operating a range of lifts is essential. This involves maneuvering scissor lifts, boom lifts, and other mechanical devices to reach higher areas. Perform other duties as assigned. Minimum Education and/or Experience Requirements High School Diploma / GED 1-2 years commercial or industrial maintenance experience Knowledge of a variety of building maintenance procedures and techniques. Knowledge of occupational hazards and safety precautions. Skill in using hand and power tools. Must be authorized to work in the US A good job for someone just entering the workforce or returning to the workforce with limited experience and education. ABM is a military and veteran friendly employer, veterans and candidates with military experience encouraged to apply. Military Occupational Specialty Code: 91E, 91C, EM, HT, MK, DC, 1161, 1341, 3E1X1 #LI-TA #200 About Us ABM (NYSE: ABM) is one of the world's largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM's comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries - from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit ******************* ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call ************. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you'll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you're looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ******************* ABM does not accept unsolicited resumes.

About the Role We're looking for skilled Maintenance Technicians & Mechanics to keep our production and facility equipment running at peak performance. In this role, you'll troubleshoot, repair, and maintain mechanical, electrical, pneumatic, and hydraulic systems to ensure smooth operations and zero downtime. What You'll Do Install, maintain, and repair food processing and production equipment. Diagnose and fix mechanical, electrical, pneumatic, and hydraulic issues. Read and interpret manuals and work orders to complete service tasks. Perform routine plant inspections and address potential issues proactively. Respond quickly to maintenance calls to keep production moving. Maintain utility systems to prevent downtime. Keep accurate records for safety, quality, and compliance. Follow all safety rules, PPE requirements, and food safety standards. Participate in required safety and quality training. Identify opportunities for continuous improvement. What We're Looking For Experience: Hands-on maintenance experience in a manufacturing or industrial setting. Skills: Strong mechanical and electrical troubleshooting skills; ability to work with pneumatic and hydraulic systems. Tech Savvy: Basic computer skills for work orders and documentation. Problem Solver: Ability to think on your feet and resolve issues quickly. Team Player: Good communication and time management skills. Preferred Qualifications Knowledge of ammonia refrigeration systems. Welding experience. Bilingual (English/Spanish). Associate degree in a technical field or equivalent experience. Additional Details Work Environment: Shop and plant setting with exposure to moving parts, vibration, temperature changes, and loud noise. Travel: Less than 5%. Requirements: High school diploma/GED, valid driver's license, minimum age 18. Ready to join a team that values safety, quality, and continuous improvement? Apply today and help us keep production running smoothly!

About the Role We're looking for skilled Maintenance Technicians & Mechanics to keep our production and facility equipment running at peak performance. In this role, you'll troubleshoot, repair, and maintain mechanical, electrical, pneumatic, and hydraulic systems to ensure smooth operations and zero downtime. What You'll Do Install, maintain, and repair food processing and production equipment. Diagnose and fix mechanical, electrical, pneumatic, and hydraulic issues. Read and interpret manuals and work orders to complete service tasks. Perform routine plant inspections and address potential issues proactively. Respond quickly to maintenance calls to keep production moving. Maintain utility systems to prevent downtime. Keep accurate records for safety, quality, and compliance. Follow all safety rules, PPE requirements, and food safety standards. Participate in required safety and quality training. Identify opportunities for continuous improvement. What We're Looking For Experience: Hands-on maintenance experience in a manufacturing or industrial setting. Skills: Strong mechanical and electrical troubleshooting skills; ability to work with pneumatic and hydraulic systems. Tech Savvy: Basic computer skills for work orders and documentation. Problem Solver: Ability to think on your feet and resolve issues quickly. Team Player: Good communication and time management skills. Preferred Qualifications Knowledge of ammonia refrigeration systems. Welding experience. Bilingual (English/Spanish). Associate degree in a technical field or equivalent experience. Additional Details Work Environment: Shop and plant setting with exposure to moving parts, vibration, temperature changes, and loud noise. Travel: Less than 5%. Requirements: High school diploma/GED, valid driver's license, minimum age 18. Ready to join a team that values safety, quality, and continuous improvement? Apply today and help us keep production running smoothly!

About the Role We're looking for skilled Maintenance Technicians & Mechanics to keep our production and facility equipment running at peak performance. In this role, you'll troubleshoot, repair, and maintain mechanical, electrical, pneumatic, and hydraulic systems to ensure smooth operations and zero downtime. What You'll Do Install, maintain, and repair food processing and production equipment. Diagnose and fix mechanical, electrical, pneumatic, and hydraulic issues. Read and interpret manuals and work orders to complete service tasks. Perform routine plant inspections and address potential issues proactively. Respond quickly to maintenance calls to keep production moving. Maintain utility systems to prevent downtime. Keep accurate records for safety, quality, and compliance. Follow all safety rules, PPE requirements, and food safety standards. Participate in required safety and quality training. Identify opportunities for continuous improvement. What We're Looking For Experience: Hands-on maintenance experience in a manufacturing or industrial setting. Skills: Strong mechanical and electrical troubleshooting skills; ability to work with pneumatic and hydraulic systems. Tech Savvy: Basic computer skills for work orders and documentation. Problem Solver: Ability to think on your feet and resolve issues quickly. Team Player: Good communication and time management skills. Preferred Qualifications Knowledge of ammonia refrigeration systems. Welding experience. Bilingual (English/Spanish). Associate degree in a technical field or equivalent experience. Additional Details Work Environment: Shop and plant setting with exposure to moving parts, vibration, temperature changes, and loud noise. Travel: Less than 5%. Requirements: High school diploma/GED, valid driver's license, minimum age 18. Ready to join a team that values safety, quality, and continuous improvement? Apply today and help us keep production running smoothly!

Manufacturing Maintenance Technician--3rd shift opening Are you a skilled technician with a passion for solving complex problems and keeping things running smoothly? Join our team as an Electrical and Mechanical Maintenance Technician and play a vital role in maintaining and enhancing our operations. This is your chance to work with cutting-edge equipment and make a real impact! What You'll Do: Respond to breakdowns and troubleshoot mechanical equipment and electrical control circuits. Install and modify electrical equipment, including PLCs, instrumentation, and variable speed AC and DC drives. Collaborate with production team to identify and resolve operating and maintenance issues. Assist in designing, constructing, and operating systems for energy generation, transmission, and distribution. Work closely with engineering teams to maximize equipment and resource utilization. Requirements Minimum of 2 years in a manufacturing maintenance position Strong understanding of machine operations and the interaction of electrical and mechanical components. Ability to plan and prioritize tasks in a self-directed work environment. Extensive knowledge of electrical production equipment and troubleshooting. Knowledge of industrial electrical control, including AC drives, PLC programming, panel layout, wiring, hydraulics, and pneumatics. Strong problem-solving skills and decision-making abilities. Good communication skills to interact with internal and external customers and suppliers. Knowledge of tooling, machining, and fabrication. Ability to read complex drawings and specifications. Basic computer skills BENEFITS: • Highly competitive salary and bonus structure • On-Demand Pay - Access your earned pay prior to payday • 100% Company-Paid Employee Health Insurance, Life Insurance, & Disability Insurance • Competitive Paid Time Off Plan plus 9 Paid Holidays • 200% Company 401(K) Match • Annual Profit-Sharing Bonuses • Company Stock Options • Dental & Vision Insurance • Health Savings Account with Company match • On-site Childcare for Employees' Children and Grandchildren • Educational Assistance Plan • Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Recognized as one of the fastest growing furniture and cabinet manufacturers in the United States, Stevens Industries, Inc. is a world-class manufacturer of wood and laminated products. We're dedicated to innovation, technological advancement, and beauty in functionality. Founded in 1956 and 100% employee owned, we credit our achievements to a focused path and our talented, passionate employee owners. Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. The pay range provided represents the expected compensation for this position. Actual pay will be determined based on factors such as experience, skills, and qualifications, while maintaining fairness with internal pay structures. We ensure compliance with all applicable wage and hour laws, including those related to minimum pay requirements. Salary Description Starting at $28 per hour

Manufacturing Maintenance Technician-- 1st shift opening Are you a skilled technician with a passion for solving complex problems and keeping things running smoothly? Join our team as an Electrical and Mechanical Maintenance Technician and play a vital role in maintaining and enhancing our operations. This is your chance to work with cutting-edge equipment and make a real impact! What You'll Do: Respond to breakdowns and troubleshoot mechanical equipment and electrical control circuits. Install and modify electrical equipment, including PLCs, instrumentation, and variable speed AC and DC drives. Collaborate with production team to identify and resolve operating and maintenance issues. Assist in designing, constructing, and operating systems for energy generation, transmission, and distribution. Work closely with engineering teams to maximize equipment and resource utilization. Requirements Minimum of 2 years in a manufacturing maintenance position Strong understanding of machine operations and the interaction of electrical and mechanical components. Ability to plan and prioritize tasks in a self-directed work environment. Extensive knowledge of electrical production equipment and troubleshooting. Knowledge of industrial electrical control, including AC drives, PLC programming, panel layout, wiring, hydraulics, and pneumatics. Strong problem-solving skills and decision-making abilities. Good communication skills to interact with internal and external customers and suppliers. Knowledge of tooling, machining, and fabrication. Ability to read complex drawings and specifications. Basic computer skills BENEFITS: Highly competitive salary and bonus structure On-Demand Pay - Access your earned pay prior to payday 100% Company-Paid Life Insurance and Disability Insurance Affordable Employee Health Insurance Competitive Paid Time Off Plan plus 9 Paid Holidays 200% Company 401(K) Match Annual Profit-Sharing Bonuses Company Stock Options Dental & Vision Insurance Health Savings Account with Company match On-site Childcare for Employees' Children and Grandchildren Educational Assistance Plan Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Recognized as one of the fastest growing furniture and cabinet manufacturers in the United States, Stevens Industries, Inc. is a world-class manufacturer of wood and laminated products. We're dedicated to innovation, technological advancement, and beauty in functionality. Founded in 1956 and 100% employee owned, we credit our achievements to a focused path and our talented, passionate employee owners. Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. The pay range provided represents the expected compensation for this position. Actual pay will be determined based on factors such as experience, skills, and qualifications, while maintaining fairness with internal pay structures. We ensure compliance with all applicable wage and hour laws, including those related to minimum pay requirements. Salary Description Starting at $28 per hour