Research And Development Engineer jobs at Sherwin-Williams - 4587 jobs

The Research and Development (R&D) Engineer uses their technical design skills to drive the products from theoretical structural designs and calculations to the physical testing, approvals and certifications. As part of the AWIP Innovation Team, the R&D Engineer collaborates with the technical, design, and business development teams to take new product developments and improvement of existing products from the stages of concept, evaluation, design, validation, approval, product launch, and installation. This position will be critical in ensuring that AWIP remains ahead in the industry for innovative and sustainable building products. Essential Functions: Work with the innovation and cross-functional teams to envision, design, manufacture, prototype, and launch innovative products Research and develop new products while optimizing cost and performance Participate and provide deliverables for the product development phase/stage gate system Maintain detailed and organized notes and information for each project including, but not limited to, vendors, material types, successes and failures, modifications, etc. Ensure test materials and assemblies are properly installed and prepared at test laboratories by assisting in assembly preparation, witnessing and supervising testing. Design building test rigs and apparatuses as required for internal testing Ensure all products meet performance, application and reliability standards through rigorous laboratory and field testing Collaborates with the Innovation team members and respective departments to ensure proper testing, certifications, and approvals are attained Perform market research to determine types of products required in market Investigate new/existing products and compare to rival products in construction market Be a professional resource with detailed knowledge about products in terms of R&D, market competition, cost, manufacturing deployment, application. Comply with all safety and company policies and procedures. Perform other related duties as assigned. Minimum Qualifications: Bachelor's Degree in Mechanical Engineering, Structural Engineering, or Civil Engineering with structural design emphasis Minimum of three years of experience in product development/design engineering E.I.T. with ability to obtain P.E. license preferred Working knowledge of Tekla, Solidworks, Revit, AutoCAD or other 3D modeling software Experience with structures, building materials and construction industry Proactive attitude to learn new products and technologies and build relationships with vendors Self-starter with proven record of innovation, problem solving, and delivering technical solutions in a timely manner. Excellent time management skills with ability to manage multiple projects at once and be able to prioritize by importance, schedule and necessity. Technical knowledge to understand and effectively communicate building science methodologies, design, technical information building codes and standards in an understandable manner. Must be able to effectively use a computer and have intermediate proficiency MS Excel, MS Word, and email and basic proficiency in the rest of MS Office. Position is an in-office position with travel to meet with vendors and clients, test laboratories, job site visits, etc. Frequent travel by automobile, airplane, and other modes of public transportation are required. Maintain a valid driver's license and passport Essential Requirements: Ability to work 8 hours per day with ability to work overtime as need to complete time sensitive tasks. Ability to work in a non-climate controlled environment with extreme temperatures and outdoor exposure at times. Ability to read and interpret drawings, specifications, submittals, technical and contract documents. Ability to safely lift up to 50 lbs. Excellent organizational skills and attention to detail. Must be able to use tools, equipment, machinery, etc. Must have visual acuity, discernment of color and texture, and finger dexterity. Ability to read, write, type, and verbally communicate effectively in English. Ability to sit, walk, and stand for extended periods. Must be able to bend, lift, twist, reach, grasp, and other physical movements. Must be reliable, dependable and highly motivate with a desire to be successful. AWIP is a drug free workplace.

AOSense, Inc. is the leading developer and manufacturer of innovative quantum technologies employing atom optics. Our products use frequency-stabilized lasers and atoms in a vacuum cell to measure accelerations, rotations, magnetic fields, and time with unparalleled accuracy and stability. Our staff includes physicists, engineers, and technicians with expertise covering a wide array of disciplines. Our teams are dynamic and fast paced since our hardware is cutting edge. POSITION SUMMARY: We are seeking an R&D technician who specializes in precision assembly and testing. As a hands-on R&D Technician at AOSense, you will work with physicists and engineers to build and test high-performance, fieldable accelerometers, gyroscopes, gravimeters, atomic clocks, frequency standards, and magnetometers, as well as component technologies that we sell commercially to the R&D community. RESPONSIBILITIES: Collaborate with physicists and engineers to assemble and test complex quantum sensor and atomic clock hardware Procure and track inventories of mechanical, optical, vacuum, and electrical components Coordinate component and subsystem fabrication, assembly, and test Assemble precision mechanical systems Align lasers through optical systems Procure and maintain laboratory equipment and supplies Collaborate with engineers to define and implement test plans Bake out and leak test vacuum systems Document and report results of validation testing Requirements Demonstrated success in precision mechanical assembly of prototypes and products Enthusiasm for developing expertise in new fabrication disciplines Proven organizational skills and attention to detail Hands-on experience with test equipment Excellent troubleshooting skills Applicants should thrive in a dynamic environment U.S. Government contracts require applicants to be U.S. citizens or permanent residents DESIRED EXPERIENCE: Expertise aligning and securing micro-optical components Hands-on experience with vacuum system assembly and testing Adept in glovebox assembly work Sensitivity to cleanliness requirements of vacuum and optical assemblies Skilled in mechanical prototyping, including basic machining and finishing operations Practical experience with advanced bonding methods, including soldering, brazing, and adhesives Proficiency with SolidWorks mechanical design software Familiarity with electronics prototyping, including reading schematics, PCB fabrication, assembly, soldering, and rework Experience testing low-noise analog, mixed-signal, and rf electronics Basic knowledge of data acquisition and analysis software such as LabVIEW, MATLAB, and Python EDUCATION AND EXPERIENCE: Associate degree in a relevant technical field or equivalent professional experience, with experience in an R&D environment Benefits Salary depends on qualifications and experience Medical and dental Retirement Stock plan AOSense is an equal opportunity employer (EOE) and considers qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran or disability status, or any other federal, state or local protected class. AOSense is committed to providing equal employment opportunity to qualified individuals with disabilities. If you are disabled and require special assistance or a reasonable accommodation while seeking employment with AOSense, then please contact us via email at ******************* or call ************** x210

Tessenderlo Kerley, Inc. is a company of diverse businesses unified by shared values and vision. Considering making an application for this job Check all the details in this job description, and then click on Apply. We serve the agriculture, mining, industrial and water reclamation markets with a broad range of products and technologies, worldwide. Serving these customers well is a passion and a commitment-one that the people of Tessenderlo Kerley find rewarding, empowering and meaningful. xevrcyc If you want the work you do to make a positive impact on the world in which we live, and work alongside innovative, quality-focused people of vision, Tessenderlo Kerley is the right place for you. Mechanical Engineer II / Quality Control Lead PandoLogic. Keywords: Mechanical Engineer, Location: Carlsbad, NM - 88221

Delta, founded in 1971, is a global leader in switching power supplies and thermal management products with a thriving portfolio of smart energy-saving systems and solutions in the fields of industrial automation, building automation, telecom power, data center infrastructure, EV charging, renewable energy, energy storage and display, to nurture the development of smart manufacturing and sustainable cities. As a world-class corporate citizen guided by its mission statement, “To provide innovative, clean and energy-efficient solutions for a better tomorrow,” Delta leverages its core competence in high-efficiency power electronics and its ESG-embedded business model to address key environmental issues, such as climate change. Delta serves customers through its sales offices, R&D centers and manufacturing facilities spread over close to 200 locations across five continents. Delta has 158 sales offices, 72 R&D centers and 48 manufacturing facilities worldwide. Throughout its history, Delta has received various global awards and recognition for its business achievements, innovative technologies, and dedication to ESG. Since 2011, Delta has been listed on the DJSI World Index of Dow Jones Sustainability™ Indices for 11 consecutive years. In 2021, Delta was also recognized by CDP with leadership level ratings for its substantial contribution to climate change and water security issues and named Supplier Engagement Leader for its continuous development of a sustainable value chain. Power Electronics R&D Engineer - EV Power We are seeking a highly skilled and motivated R&D Engineer to join our team focused on developing cutting-edge on-board chargers for electric vehicles (EVs). The ideal candidate will have a deep understanding of various power conversion topologies, magnetics and wide band gap devices, with a strong background in both theoretical and practical aspects of power electronics. Key Responsibilities: - Design and develop innovative on-board charger solutions for EV applications. - Research and implement power factor correction topologies, including both hard-switching and soft-switching techniques. - Develop and optimize dual-active-bridge (DAB) and resonant DC-DC topologies. - Work on single-stage AC-DC topologies, including resonant and DAB configurations - Work on wireless power chargers for next generation autonomous charging fleet - Work on Ultra-wide range DC-DC chargers and high step-down auxiliary battery charging applications - Explore and implement new bidirectional devices like bi-GaN and bi-SiC in various applications such as Vienna rectifiers, Current Source Inverters (CSI), and single-stage isolated AC-DC converters. - Collaborate with cross-functional teams overseas to ensure seamless integration of new technologies into existing and new products. - Conduct simulations (Simplis, PLECS, ANSYS, Matlab/Simulink) and prototype testing to validate design concepts and ensure performance meets required specifications. - Stay up-to-date with the latest advancements in power electronics and EV charging technologies. - Prepare technical reports, presentations, and documentation to communicate findings and support product development. Qualifications: - Master's or Ph.D. degree in Electrical Engineering, Power Electronics, or a related field. - Proven experience in power electronics design and development, specifically in EV on-board chargers. - Strong knowledge of power factor correction topologies (both hard-switching and soft-switching). - Expertise in DAB and resonant DC-DC topologies, single stage AC-DC topologies, wireless power charging - Knowledge of EMI noise source and propagation phenomenon, experience with EMI filter design - Proficiency in working with wide band gap devices such as SiC and GaN. - Familiarity with new bidirectional devices (bi-GaN and bi-SiC) and their applications. - Hands-on experience with simulation tools such as MATLAB/Simulink, Simplis, PLECS, or similar. - Excellent problem-solving skills and the ability to work independently and as part of a team. - Strong communication skills, both written and verbal. Preferred Qualifications: - Experience in the automotive industry, particularly in EV charging systems. - Knowledge of industry standards and regulations related to EV charging. - Experience with hardware design and testing (6 kW, 11 kW, 22 kW), including PCB layout and thermal management. What We Offer: - Competitive salary and benefits package. - Opportunity to work on cutting-edge technology in the rapidly growing EV industry. - Collaborative and innovative work environment. - Professional development and career advancement opportunities such as IP generation. Equal Opportunity Employer: We are an equal opportunity employer and value diversity in our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Do you want to realize your ambitions while being part of a principle driven organization that aspires to transform its business through powerful Brands? At LT Foods Americas (LTFA), we have an ambition to become a Food business driven by the 5 principles that underpin everything we do: Business Ethics, Innovation, Ownership, Passion for Excellence, & Customer Centricity. We are seeking associates who want to drive meaning in their work that benefits them, the organization and the world around us. What you get at LTFA is challenging, interesting work with opportunities to grow in the U.S, Europe & beyond. You get the tools you need to do an excellent job and you have smart, motivated people around you to help you do it! It's about having ideas. And ideals. Being prepared to risk failure because the promise of success means we'll all be a little better off. It's that mix of integrity and ambition that makes LTFA such a special place to work. And why working here is always about more than just a job. LT Foods Americas (LTFA) is part of LT Foods Limited, an emerging global food company, with Net Sales in excess of $1 billion globally, operating across a range of categories including specialty rice, organic foods and convenience rice-based products. The Company is engaged in milling, processing and marketing of branded and non-branded basmati rice, and manufacturing of rice food products in India & international market. LT Foods has a global presence including India, Middle East, United Kingdom, Europe and United States. Its operations include contract farming, procurement, storage, processing, packaging and distribution. Its rice product portfolio comprises brown, white, steamed, parboiled, organic, quick cooking brown rice, and ready-to-heat rice. The Company's brands include DAAWAT , ROYAL ; 817 ELEPHANT , INDUS VALLEY , ECOLIFE & GRAPEOLA . LT Foods Americas is looking for an R&D Process Engineer based out of our Missouri City, TX facility. About the job The R&D Process Engineer will be responsible for developing, implementing, and enhancing processes necessary to successfully commercialize new products. This position works closely with manufacturing team to implement these processes on full-scale launches and leads any trouble-shooting activities in the post-launch phase. This role will help develop solutions based on technical and business needs. Core Responsibilities: Manage the Pilot line and all applicable equipment to ensure that GMP policies and procedures were implemented, practiced, and documented. Design and execute experimental protocols on bench, pilot, and full-scale processes, including verifying the appropriate operating conditions for a given process and validating that our customers can properly control the process internally and externally. Manage cross-functional projects relating to processes and products to manufacture new solutions. Supports both internal and external manufacturing, including commercialization of new R&D products. Analyze and resolve processing-related problems that arise in manufacturing, jointly with operations and quality. Define process equipment requirements for a given project; design/ select bench, pilot, and full-scale processing equipment to meet these requirements. Effectively document all equipment process activities that enable the effective transfer of a new process to manufacturing through written reports and formalized on-site training. Present ideas and results effectively and credibly in cross-functional team settings as well as to senior management. Act as a subject matter expert on topics related to processing for internal product/ process development team members and external customers. Experience in communicating and working with both internal and external customers regarding processes and products is highly desirable. Qualified Candidates Will Have: Bachelor's degree in food science with at least five years of experience. Proven track record of successful projects involving process design and scale-up of new food products. Experience working in a manufacturing environment and ability to troubleshoot. Familiarity with manufacturing processes for producing food-grade materials. Experience with financial evaluation of new processes and equipment. Some formulation experience with the development and scaling of new products into Customers. Understanding of process and operations to scale manufacturing. Demonstrated strong written and verbal communication skills. Must be able to communicate across functional lines and at all levels of the organization. Experience with SAP and Formulation Management systems.

The Manufacturing Electrical Engineer supports Production by development and implementation of robust processes for vehicle and equipment programming, error proofing, and other controls within the facility. The Manufacturing Electrical Engineer inter Manufacturing Engineer, Electrical, Manufacturing, Electrical Engineer, Engineer, Vehicle

Blue Bird (NASDAQ: BLBD) is recognized as a technology leader and innovator of school buses since its founding in 1927. Our dedicated team members design, engineer and manufacture school buses with a singular focus on safety, reliability, and durability. School buses carry the most precious cargo in the world - 25 million children twice a day - making them the most trusted mode of student transportation. The company is the proven leader in low- and zero-emission school buses with more than 25,000 propane, natural gas, and electric powered buses sold. Blue Bird is transforming the student transportation industry through cleaner energy solutions. For more information on Blue Bird's complete product and service portfolio, visit ****************** JOB SUMMARY The Manufacturing Electrical Engineer supports Production by development and implementation of robust processes for vehicle and equipment programming, error proofing, and other controls within the facility. The Manufacturing Electrical Engineer interfaces with other members of the Engineering, Operations, and extended teams to trouble shoot and implement improvements to correct issues and improve efficiency. ESSENTIAL DUTIES AND RESPONSIBILITIES Assessing project requirements such as technical challenges, engineering hours, risk assessment, etc. Ensure processes are robust to vehicles meet FMVSS, State, and customer requirements Assist in definition of electrical system and component specifications Review electrical designs of equipment and product to ensure they are safe, robust, and efficient Focus on cost reductions and demonstrate ability to control project and verification costs Liaising with suppliers Communicate well with the cross-functional team (Design, IT, Purchasing, Management, etc.) Able to manage a multitude of various projects and strive for on-time resolution of issues or implementation of changes Providing technical advice and troubleshooting of manufacturing issues to resolution Analyzing and interpreting communications and signal data Programming development and validation for Blue Bird vehicle software Development and implementation of robust manufacturing solutions for programming of equipment and product KNOWLEDGE, SKILLS AND ABILITIES FOR SUCCESS Individual needs to be technically minded, able to manage people and projects to completion Experience with several of the following areas of electrical integration is a preference: Electric Vehicles CAN Bus / J1939 data links / Multiplexing / Vehicle Electronic Programming Stations (VEPS) Automotive displays (LCD, Touchscreen, ) Automotive Feature Integration Automotive Wiring /Harnesses Simulink model-based system design PLC programming / hardware and ladder logic, especially Allen Bradley Robotic automation, especially Fanuc BASIC EDUCATION AND EXPERIENCE REQUIRED Bachelor of Science in Electrical Engineering from an accredited university or equivalent combination of experience and education 3 years of manufacturing experience required Automotive or truck environment, preferred * All candidates must be a U.S. citizen or permanent resident WORK CONDITIONS (The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) Office environment and production environment Must work in manufacturing environment with exposure to heat, cold and noise Fast paced production area with moving objects and sheet metal Occasional periods of standing or sitting for extended periods of time Must wear appropriate PPE when and where required Frequent weeks working 40+ hours Frequent communication with people throughout the day The specific statements shown in each section of this description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Blue Bird is an equal opportunity employer and makes employment decisions on the basis of merit. We strive to have the best available talent in every job based on the Knowledge, Skills and Abilities each person brings. Blue Bird is committed to compliance with all applicable laws providing equal employment opportunities. This commitment applies to all persons involved in Company operations and prohibits unlawful discrimination in all forms. All candidates must be a U.S. citizen or permanent resident. Candidates must be authorized to work in the United States and will be required to provide proof of employment eligibility at the time of hire. #LI-Onsite

At Blue Bird (BLBD), we come to work every day with one common goal: to design, build, sell and service North America's finest school bus. That's what we do - no distractions, no competing priorities. Since 1927, we have focused on listening to our customers, embracing their needs, and delivering innovations that lead the market. Today, we are a billion-dollar school bus manufacturer headquartered in Macon, Georgia with manufacturing facilities located just over an hour south of Atlanta, in Fort Valley, Georgia. We are pleased to share that we have a career opportunity for a Manufacturing Engineer as a strategic part of the Blue Bird Production Engineering Team. With a focus on the Three Blue Bird Foundational Objectives: Take Care of Employees: Delight Customers & Dealers: Deliver Profitable Growth. This role will drive functional excellence and continuous improvement. JOB SUMMARY: Reporting to the Manufacturing Engineering Manager, this role is responsible for optimizing production manufacturing processes through developing, planning, and implementing improvements that positively impact safety, quality, labor, and delivery utilizing engineering principles. ESSENTIAL DUTIES AND RESPONSIBILITIES: Production line technical support Provide necessary tooling, routers, labor standards, raw material structure, make vs. buy analysis, process instructions, and technical support for the timely implementation of engineering changes Accountable for achieving goals and objectives for the Mfg Engineering group and Operations organization. Utilize PLM system including reviewing product design changes and assess manufacturing impact Recognize labor impact with process/design changes and implement plans with little impact to Mfg departments. Develop business cases, write AFEs for funding procurement Develop process changes/improvements using SPC, PFMEA, and control plans Utilize root cause analysis methodology to solving manufacturing issues Will be working within an ISO 9000 quality system and produce documentation acceptable to the customer Document and report work activity Document and report work activity. Perform other related duties as assigned KNOWLEDGE, SKILLS AND ABILITIES: Balanced, dynamic, methodical approach; good work ethic, integrity, and professional conduct Must demonstrate positive attitude; foster teamwork; responsive to customer/Mfg issues Effective written and verbal communication skills; administrative and financial skills, excellent problem solver; able to interact with personnel in other organizations. Ability to read and understand Engineering prints/drawings Bus Body and Chassis assembly Program management and launch EDUCATION AND EXPERIENCE: Bachelor's degree in engineering from Accredited University required Minimum 2 years' experience in manufacturing, automotive preferred Past experience in Production Supervision a plus Must possess excellent planning and organization skills Competent user of MS Office products All candidates must be a U.S. citizen or permanent resident WORKING CONDITIONS: Manufacturing environment with exposure to heat, cold and noise Must be able to work with diverse workforce Weekends and travel as required The specific statements shown in each section of this description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Blue Bird is an equal opportunity employer and makes employment decisions on the basis of merit. We strive to have the best available talent in every job based on the Knowledge, Skills and Abilities each person brings. Blue Bird is committed to compliance with all applicable laws providing equal employment opportunities. This commitment applies to all persons involved in Company operations and prohibits unlawful discrimination in all forms. All candidates must be a U.S. citizen or permanent resident. Candidates must be authorized to work in the United States and will be required to provide proof of employment eligibility at the time of hire. #LI-Onsite

Responsibilities: Work with Operations/Process/Project Management Teams in development of Capex Projects through Scope, Estimations, Specifications, Control Narratives & Conceptual Design. Contributes as subject area resource in a variety of mechanical engineering areas providing support for systems design, engineering reviews, root-cause analysis and continuous improvement. Reviews and approves work of outside engineering consultants including flow diagrams, general arrangement drawings, specifications, RFQs, bid evaluations, vendor drawings, as-built drawings and manuals. Prepare basic design drawings, specifications, and operating instructions. Meet Carmeuse expectations with a focus on safety, environmental compliance, equipment reliability, and value engineering. Direct and coordinate any internal and external resources under his/her control. Assist with troubleshooting and performance enhancements of mechanical systems and recommend cost effective solutions and repairs. Interact effectively with plant team members, process engineers, and project managers to achieve goals. Other related responsibilities as assigned. Required Knowledge & Skills: Able to design or troubleshoot systems that use mechanical equipment including belt and screw conveyors, bucket elevators, pneumatic conveying systems, crushers, screens, hydraulic/pneumatic systems, gearboxes, fans, blowers, pumps among others. Design, operation and maintenance of rotary or vertical lime kilns, mills, crushers, screens, coolers, dust collectors, silos and other lime and stone production related equipment. Understanding of various codes and regulations such as NFPA, MSHA, CEMA, AISC, OSHA etc. Strong mechanical engineering skills. (Electrical and Civil engineering cross-training is a plus) with enough learning agility to continuously update these skills and build expertise. Project scheduling and basic accounting principles. Possesses a safety focus and proactive attitude towards mine and plant safety. Ability to manage multiple projects simultaneously. SAP or ability to learn the system as well as proficiency with Microsoft Office software including Excel, Word, Project, PowerPoint, and design and modelling software similar to AutoCAD, Inventor, Navisworks or Revit, AggFlow Excellent personnel skills and the ability to communicate effectively with all levels of internal and external customers and contractors, both verbally and in writing. Highly motivated and able to work with a minimum of supervision in a multi-task, dynamic, multi-national, and diverse team environment taking initiative to propose solutions. Ability to complete conceptual designs, layouts, write specification and construction scopes, RFQs, and complete bid evaluations Ability to work closely with plant managers, staff members, supervisors, team leaders, hourly associates, contractors, and federal/state regulators. Strong quantitative problem solving and time management skills. Ability to understand and effectively communicate using engineering drawings and sketches. Ability to travel by air and/or car (driver's license required) up to 25% domestically with some international travel as well which could include extended assignments during critical construction and start-up periods. Detail and process oriented with excellent win/win problem resolution abilities and effective decision making. Basic Requirements: Qualified candidates will have a Bachelor of Mechanical Engineering, or other disciplines with pertinent experience i.e. Mining, Industrial. 8+ years project engineering experience in a multi-disciplinary approach within an industrial environment, preferably in the lime, cement or mining. Fluency in spoken and written English. Proven track record of achieving timely results and while maintaining a safe work environment. Benefits & Compensation Package Includes: Salary range for this position is $81,000 - $137,000 Paid holidays and vacation time Group medical/pharmacy insurance options with company funded health care spending accounts Dental insurance & Vision insurance A 401k account with company matching contribution Company-paid life insurance and short-term and long-term disability insurance Options to purchase additional life insurance (employee, spouse, and child) and additional employee long-term disability insurance. Employee Assistance Program (EAP) Tuition benefits including professional certifications #LI-Hybrid

Responsibilities: Work with Operations/Process/Project Management Teams in development of Capex Projects through Scope, Estimations, Specifications, Control Narratives & Conceptual Design. Contributes as subject area resource in a variety of mechanical engineering areas providing support for systems design, engineering reviews, root-cause analysis and continuous improvement. Reviews and approves work of outside engineering consultants including flow diagrams, general arrangement drawings, specifications, RFQs, bid evaluations, vendor drawings, as-built drawings and manuals. Prepare basic design drawings, specifications, and operating instructions. Meet Carmeuse expectations with a focus on safety, environmental compliance, equipment reliability, and value engineering. Direct and coordinate any internal and external resources under his/her control. Assist with troubleshooting and performance enhancements of mechanical systems and recommend cost effective solutions and repairs. Interact effectively with plant team members, process engineers, and project managers to achieve goals. Other related responsibilities as assigned. Required Knowledge & Skills: Able to design or troubleshoot systems that use mechanical equipment including belt and screw conveyors, bucket elevators, pneumatic conveying systems, crushers, screens, hydraulic/pneumatic systems, gearboxes, fans, blowers, pumps among others. Design, operation and maintenance of rotary or vertical lime kilns, mills, crushers, screens, coolers, dust collectors, silos and other lime and stone production related equipment. Understanding of various codes and regulations such as NFPA, MSHA, CEMA, AISC, OSHA etc. Strong mechanical engineering skills. (Electrical and Civil engineering cross-training is a plus) with enough learning agility to continuously update these skills and build expertise. Project scheduling and basic accounting principles. Possesses a safety focus and proactive attitude towards mine and plant safety. Ability to manage multiple projects simultaneously. SAP or ability to learn the system as well as proficiency with Microsoft Office software including Excel, Word, Project, PowerPoint, and design and modelling software similar to AutoCAD, Inventor, Navisworks or Revit, AggFlow Excellent personnel skills and the ability to communicate effectively with all levels of internal and external customers and contractors, both verbally and in writing. Highly motivated and able to work with a minimum of supervision in a multi-task, dynamic, multi-national, and diverse team environment taking initiative to propose solutions. Ability to complete conceptual designs, layouts, write specification and construction scopes, RFQs, and complete bid evaluations Ability to work closely with plant managers, staff members, supervisors, team leaders, hourly associates, contractors, and federal/state regulators. Strong quantitative problem solving and time management skills. Ability to understand and effectively communicate using engineering drawings and sketches. Ability to travel by air and/or car (driver's license required) up to 25% domestically with some international travel as well which could include extended assignments during critical construction and start-up periods. Detail and process oriented with excellent win/win problem resolution abilities and effective decision making. Basic Requirements: Qualified candidates will have a Bachelor of Mechanical Engineering, or other disciplines with pertinent experience i.e. Mining, Industrial. 8+ years project engineering experience in a multi-disciplinary approach within an industrial environment, preferably in the lime, cement or mining. Fluency in spoken and written English. Proven track record of achieving timely results and while maintaining a safe work environment. Benefits & Compensation Package Includes: Salary range for this position is $81,000 - $137,000 Paid holidays and vacation time Group medical/pharmacy insurance options with company funded health care spending accounts Dental insurance & Vision insurance A 401k account with company matching contribution Company-paid life insurance and short-term and long-term disability insurance Options to purchase additional life insurance (employee, spouse, and child) and additional employee long-term disability insurance. Employee Assistance Program (EAP) Tuition benefits including professional certifications #LI-Hybrid About Us READY TO JOIN A ROCK-SOLID FAMILY? Carmeuse started out as a small family-run business in Belgium. Today it's a leading global producer of lime, high calcium limestone and dolomitic stone. Its products are essential to energy producers, environmental services, construction and manufacturing. With over 90 production facilities spread across almost every continent, and over 4,500 employees working at Carmeuse every day, the company's most treasured resources are its people. Carmeuse is dedicated to maintaining a workplace that fosters equal opportunity and creates a diverse and inclusive work environment. All qualified applicants will be considered for employment regardless of race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation or gender identity. If you require particular assistance with any part of the application or hiring process due to a disability, you can submit your request by sending an email to **********************. This option is reserved for people requiring adaptation due to a disability. The information received will be processed by Carmeuse and then directed to a local recruiter who will provide assistance to ensure the proper consideration of the application or hiring process. About the Team You will be part of Carmeuse Americas, a Rock-Star team of 2500 workers and employees bringing with them their own culture and specific needs. The Americas headquarters are located in Pittsburgh, PA and have over three dozen production facilities across the U.S., Canada, Brazil, and Colombia.

Help shape the structures that shape our communities! We're looking for a Design Engineer who's excited to turn bold ideas into buildable, real-world solutions. In this role, you'll design innovative precast components, collaborate with a tight-knit team of engineers and production experts, and see your work come to life on projects across the region. ***It is highly desired for this candidate to be based in Sioux Falls, SD. Relocation assistance available.*** Location: Molin Sioux Falls - 2810 N Bahnson Ave, Sioux Falls, SD 57104 Essential Functions: Prepare calculations and drawings to support structural design of product to include concrete reinforcement, product sizing, connection requirements and overall stability analysis to meet customer demands and building codes. (Hollowcore, plank, beams, columns, slabs, wall panels) Examine general plans, specifications and cost estimates to ensure drawings match customer expectations. Produce preliminary engineering calculations and design work for use by Sales and Estimating in the bidding process. Coordinate documentation and communication of construction details, loadings, etc. with General Contractors, Architects, Engineers, and Project Managers. Responsible for checking production piece drawings for proper reinforcing, lifting and stressing requirements. Respond to requests to review pre-pour and post-pour conditions, investigate damaged product or design issues to assure integrity of product and/or offer solutions for change or repair. Review cull reports and provide solutions within 24 hours. Respond to inquiries by Field employees or External Customers to resolve design issues and/or address damaged product(s) on jobsites. Provide solutions that are timely and cost effective without jeopardizing product reliability. Provide answers to questions from Outsourcers. Create spreadsheets and other tools to standardize processes and improve efficiencies. Stay current with building code changes. Assist with coaching and training of EIT and drafters as requested by Engineering Manager. Lead continuous improvement initiatives to eliminate inefficiencies and standardize processes. Attend design meetings to discuss opportunities and solutions using Molin products. Continuing education to maintain PE license(s) Education and Experience: PE License required BS degree in Civil Engineering 2-4 years experience in construction or the design/manufacture of precast Knowledge, Skills & Abilities: Team player. Knowledge of precast/prestressed concrete properties and processes for structural and architectural products. Able to read and adjust blueprints and other construction documents. Knowledge of structural engineering design practices and construction methods. Proficient in AutoCAD, Revit, Bluebeam, Risa, and Concise. Eli Plan software, in addition to a working knowledge of Microsoft Outlook, Word, Excel macros, and Project. HILTI-PROFIS Anchor. Strong organizational skills. Proficient at managing multiple projects and meeting deadlines; Project management. Excellent written and verbal communication skills; good listener. Desire and ability to train others desirable. Attention to detail and high degree of accuracy. Work with minimal supervision. Good documentation skills. High spatial intelligence and math aptitude. Excellent customer service skills. Working knowledge of building codes and design standards.

pSemi Corporation is a Murata company driving semiconductor integration. pSemi builds on Peregrine Semiconductor's 30‑year legacy of technology advancements and strong IP portfolio but with a new mission-to enhance Murata's world‑class capabilities with high‑performance semiconductors. With a strong foundation in RF integration, pSemi's product portfolio now spans power management, connected sensors, optical transceivers, antenna tuning and RF frontends. These intelligent and efficient semiconductors enable advanced modules for smartphones, base stations, personal computers, electric vehicles, data centers, IoT devices and healthcare. From headquarters in San Diego and offices around the world, pSemi's team explores new ways to make electronics for the connected world smaller, thinner, faster and better. Job Summary We are seeking an experienced Senior Staff Engineer to lead pSemi's internal prototyping assembly laboratory. The laboratory operates in a very high‑mix low‑volume environment and supports the assembly of R&D prototypes, reliability test samples and engineering samples shipped to customers for testing. The role requires expertise in the assembly processes required for fully packaged, single die flip‑chip LGA, multi‑chip modules (MCM) and System‑in‑Package devices. Assembly processing includes paste / flux screen printing for SMT components, SMT pick‑and‑place, flip‑chip attach, mass re‑flow, underfill dispense, potting or encapsulation via dam & fill, laser marking and package singulation. The ideal candidate will have extensive hands‑on experience with automated semiconductor assembly equipment such as paste / flux printers, SMT pick‑and‑place, plasma clean, underfill / potting compound dispensers, plasma cleaner, laser markers and saw singulation equipment. The candidate should also be knowledgeable of the different semiconductor industry standards based on IPC, JEDEC, MIL spec, EIA and SMTA, as well as expertise in product qualification, process development, and team leadership. In addition, the candidate should be aware of developments in assembly and packaging technologies like WLFO, CoWos, etc. Key Responsibilities Cross‑Functional Leadership: Guide cross‑functional teams in making critical packaging mechanical decisions throughout the product development stages. Process Development & Risk Mitigation: Define and develop manufacturing processes by performing detailed design analysis (tolerance analysis, RMS, FMEA, etc.) and guiding risk assessments. Design Documentation & Oversight: Coordinate preparation of design documentation, BOM, and assembly process flows, ensuring all aspects meet technical specifications and quality standards. Team Mentorship: Mentor junior engineers and lead technical development efforts across packaging and assembly disciplines. Failure Analysis & Problem Resolution: Root cause analysis and resolution of issues during both the development and production phases. Minimum Qualifications (Experience and Skills) Education: Bachelor's degree in Engineering (Mechanical, Electrical, Packaging, Materials, or Chemical), Physics, or Chemistry. MS preferred. Experience: At least 12 years in electronics packaging, including 5 years of hands‑on experience in the assembly of LGA, MCM and SiP‑specific assembly processes and packaging‑related technologies. Document Management systems: experience working with document management systems, e.g. Agile, the ECO process and Product Life Cycle management. Process Documentation: Ability to document the assembly process flow via standard process descriptions, detailed work instructions, quality specifications based on JEDEC & MIL standards. Design & Development Tools: Proficient with design tools such as AutoCAD, Cadence Allegro, CAM350 or similar. Hands‑on experience with Solidworks for basic 3D model generation. Experience setting up and overseeing operation of a semiconductor proto‑assembly lab for quick‑turn customer sampling. Packaging Knowledge: In‑depth understanding of microelectronic packaging technologies, including flip‑chip bumping, wafer backend processing and SMT. Cross‑Functional Team Leadership: Experience leading cross‑functional teams in a fast‑paced, deadline‑driven environment. Process & Risk Management: Ability to assess design feasibility, conduct cost‑risk analysis and mitigate technical risks during NPI product development. Preferred Qualifications RF Product Design: Experience with the design and packaging of RF products. Statistical Analysis Tools: Familiarity with statistical software or tools for analysis. Automated Task Management: Experience with Excel macros or automation for process optimization, Jira for task management. LGA Package Assembly: Knowledge of the assembly process flow and quality requirements per industry standards. Ability to continuously improve the assembly process flow based on concepts of DfM, DfR and similar. PCB Fabrication: Understanding of PCB fabrication and design processes. Package Reliability & Quality Assurance: Knowledge of semiconductor quality and reliability standards and failure modes. Education Requirements Bachelor's in Engineering (Packaging, Electrical, Mechanical, Materials or Chemical), Physics or Chemistry; MS preferred. Work Environment This job operates in a professional office environment. This role routinely uses standard office equipment. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand, walk, use hands to finger, handle or feel and reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. This position requires the ability to occasionally lift office products and supplies, up to 20 pounds. Compensation USD $172,201.96 - $223,874.95 per year EEO Statement pSemi Corporation supports a diverse workforce and is committed to a policy of equal employment opportunity for applicants and employees. pSemi does not discriminate on the basis of age, race, color, religion (including religious dress and grooming practices), sex/gender (including pregnancy, childbirth, or related medical conditions or breastfeeding), gender identity, gender expression, genetic information, national origin (including language use restrictions and possession of a driver's license issued under Vehicle Code section 12801.9), ancestry, physical or mental disability, legally‑protected medical condition, military or veteran status (including “protected veterans” under applicable affirmative action laws), marital status, sexual orientation, or any other basis protected by local, state or federal laws applicable to the Company. pSemi also prohibits discrimination based on the perception that an employee or applicant has any of those characteristics, or is associated with a person who has or is perceived as having any of those characteristics. Trademarks and Patents Note: The Peregrine Semiconductor name, Peregrine Semiconductor logo and UltraCMOS are registered trademarks and the pSemi name, pSemi logo, HaRP and DuNE are trademarks of pSemi Corporation in the U.S. and other countries. All other trademarks are the property of their respective companies. pSemi products are protected under one or more of the following U.S. Patents: ************************ #J-18808-Ljbffr

ECF Engineering Consultants is a full-service engineering firm specializing in providing technical solutions to the Energy Markets and to the public and private sectors that require electrical and mechanical engineering support. We serve these entities across a range of projects, offering consultation on technology utilization, design solutions for electrical and mechanical systems, public health systems, and equipment procurement and construction-phase services. General Description of Position: Principal Mechanical Engineer to oversee HVAC, electrical, and plumbing projects within the Building Services Group. MEP engineering design for commercial, institutional, industrial, municipal, and residential HVAC, electrical, and plumbing projects. The candidate shall have expertise in HVAC, electrical, or plumbing system design, as well as in energy efficiency retrofits and energy management systems. They can solve complex problems innovatively and manage people, processes, and projects effectively. We seek someone who can coach, teach, and mentor other engineers. The candidate will be responsible for designing projects, preparing reports and specifications, and providing a very high level of technical leadership. This position requires a highly experienced, motivated professional to lead the department, drive innovation, and deliver high-quality engineering solutions that meet client needs and industry standards. Essential Functions of the Position: Leadership and Management Lead, mentor, and manage a team of engineers and designers across HVAC, Electrical, and Plumbing disciplines. Foster a culture of collaboration, technical excellence, and continuous improvement. Develop and implement departmental goals, strategies, and best practices Project Oversight Supervise the technical aspects of MEP projects from concept to completion. Ensure project designs comply with codes, standards, and client requirements. Review and approve designs, calculations, and technical documents. Coordinate with other departments to ensure seamless integration of MEP systems within overall project designs. Technical Expertise Provide advanced technical guidance and troubleshooting for complex MEP systems. Stay updated with emerging technologies, trends, and regulations in the MEP field. Lead the implementation of innovative solutions to improve design efficiency and sustainability. Client and Stakeholder Engagement Serve as the primary technical point of contact for clients on MEP-related matters. Develop and maintain strong client relationships, ensuring satisfaction and repeat business. Support the business development team in preparing proposals, presentations, and technical estimates. Operational Excellence Establish and enforce quality assurance and quality control (QA/QC) standards. Monitor project budgets, schedules, and resources to ensure timely and cost-effective delivery. Manage the allocation of departmental resources for optimal performance. Training and Development Identify training needs and promote professional development for team members. Organize workshops, seminars, and other knowledge-sharing activities. Position Characteristics: Self-starter and outgoing personality traits Demonstrated leadership skills Ability to take direction and act independently Strong communication and organization skills Ability to manage multiple priorities and stay organized while doing so. Position Requirements: Bachelor's degree in mechanical, electrical, or a related engineering field. A master's degree is preferred. A Professional Engineer (PE) license is required. Minimum of 7-10 years of experience in MEP engineering, with at least 3 years in a leadership role. Strong HVAC, Electrical, and Plumbing systems design and implementation expertise. Proficient in industry software such as AutoCAD, Revit, and engineering analysis tools. In-depth knowledge of building codes, standards, and regulations (e.g., ASHRAE, NEC, IPC). Proven experience managing multidisciplinary teams and large-scale projects. Excellent communication, problem-solving, and decision-making skills. Commitment to sustainability and energy-efficient designs is a plus. Work Environment: The position requires both office-based and occasional on-site work. May involve some travel to client locations and project sites.

Before applying for this job, please read description in its entirety and if you are qualified and interested, follow the directions below on how to apply. This position is located in Roseville, CA. No relocation package is provided for non-local candidates. Harris & Bruno International is looking for a Manufacturing Engineer to work in a high pace manufacturing environment. This individual will be expected to: Carry out process improvement, problem resolution, project management and employee training. Improve manufacturing processes and methods for cost reduction, quality improvement and efficiency. Prepare and present plans and coordinate deployment including training of team. Designs, develops, and tests and/or sources and cost-justify various tools, machinery and equipment for recommended manufacturing methods. Assist in improving production control, standard operating procedures, safety, quality control and training. Perform research, design, and development of manufacturing processes including production flow, assembly methods and production equipment. Prepare and maintain detailed layouts of building and equipment. Coordinate the manufacturing launch of new/revised products including establishing goals, training team members and evaluating results. Perform product/process analysis for cost reduction, quality improvement, and improved efficiency. Represent manufacturing on cross functional teams. Maintain product and company reputation by complying with government regulations. Benefits Package Includes: Medical Dental Voluntary Vision Company provided life insurance with the option of additional voluntary life insurance. 401k with employer match. Robust PTO policy beginning with 3 weeks earned the first year. Paid holidays. Knowledge/Skills: Technical Capacity. Proficient at problem solving and analysis. Leadership. Communication proficiency. Education/Experience: Bachelor degree in Engineering required. 3 or more years' experience as a Manufacturing Engineer. Experience with 3-D Modeling Harris & Bruno International is a stable company that has been in business since 1948. We are experiencing regular, steady growth in our core and developing product lines. We enjoy a strong presence in the rapidly expanding commercial printing market supporting customers who package products that you use every day.

A leading semiconductor company in San Diego is seeking an experienced Senior Staff Engineer to lead internal prototyping and assembly. Responsibilities include overseeing assembly processes and mentoring junior engineers. The ideal candidate should possess extensive knowledge in semiconductor packaging technologies and a solid engineering background. Competitive compensation is offered with a focus on a collaborative work environment. #J-18808-Ljbffr

Your Organization Manufacturing Engineer Altec AIR New York manufactures large desiccant dryers for a variety of applications, including oil and gas, industrial compressed air, and process control to name a few. We are a small and dynamic team located outside of Buffalo, NY, about a half hour drive from Niagara Falls. Altec AIR has developed a multi-functional role here at Altec's Lancaster, NY, facility, reporting to the Sr. Staff Engineer. We are a relatively small operation with no formal compartmentalizing of engineering roles. * Bachelor's degree from an accredited university in Engineering , Mechanical, Industrial, Manufacturing, Electrical engineering or Aerospace * Minimum one year experience required, two years preferred Salary range: $77,00 - $91,500 (wage may be adjusted commensurate upon work experience). The job level may be adjusted at the time of hire should the selected candidate meet the qualifications of a more experienced job in the career path Job posting open until 2/7/26 The demands on our engineering team change day-to-day as we strive to achieve total customer satisfaction. The qualified candidate will lead us forward as we focus on improving Manufacturing and Quality processes. This role will emphasize traditional Manufacturing and Quality engineering duties, while at times and to varying degrees require basic product design skills. Manufacturing Engineering (40%) Work with Plant Manager and production associates to identify areas for improvement, such as cell layout, designing tools and fixtures, workflow, inventory reduction, component cost and labor reduction, etc. Plan and lead RCI events Learn and effectively manage the Altec AIR ERP System, with respect to engineering responsibilities (part creation, BOMs, routings, etc.) Quality Engineering (40%) Work with Altec Corporate Quality to identify opportunities for improving Altec AIR's Quality Audit score Develop Supplier and Production Quality Systems Provide engineering support to outside sales and service Assist Tech Support in troubleshooting compressed air systems in the field and in production Identify and resolve product support and other quality issues by facilitating changes to the design or manufacture of our products Identify warranty and production top drivers, perform root cause analysis, and implement corrective actions Product Design/New Product Development (20%) The required design skills for this role do not demand a Mechanical Engineering degree, but the qualified candidate will be able to perform basic product design tasks, such as: Design and specification of sheet metal components Understanding of basic electrical circuits (volts, amps, and power consumption) and pneumatic systems Participate on Altec AIR's PCP teams to develop new products within scope, manufacturability, serviceability, and efficiency Create and update engineering drawings according to Altec AIR's Engineering standards In addition to the bachelor's degree and experience, Altec Manufacturing and/or Quality experience preferred Can confidently and independently work with domestic and international suppliers to identify and improve top drivers of Quality, Cost, Delivery, Safety Knowledge of Solid works: Part, assembly and drawing creation, configurations, sheet metal modeling Understanding of pneumatic systems with confidence to develop skill in troubleshooting Academic exposure to psychrometrics is preferred (measurement of gas-vapor mixtures), ability and willingness to learn and apply it required Please apply online at jobs.altec.com Comprehensive benefits including Medical, Dental and Prescription Drug Program - Retirement 401(k) Program - Vacation and Holidays - Flexible Spending Accounts - Tuition Assistance Program - Employee Assistance and Mental Health/Substance Abuse Program - Life Insurance, Accidental Death and Dismemberment Insurance Altec Industries, Inc. and its affiliates are equal opportunity employers and maintain affirmative action plans to recruit, retain, develop, and promote qualified individuals without unlawful consideration of race, gender, color, religion, sexual orientation, gender identity, national origin, age, disability, citizenship status, veteran status, or any other characteristic protected by federal, state or local law. Altec strives to maintain a work environment free from unlawful discrimination and harassment, where associates are treated with respect and dignity.

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at * Notice: Pay Transparency Nondiscrimination (English) * Transparencia en el Pago No Discriminacio ́n (Spanish) **This position supports the Airworthiness certification of Airbus aircrafts, from new deliveries to in-service repairs and modifications, by ensuring that it complies with the highest global safety and performance standards. Duties include coordinating between our engineering teams and international aviation regulatory bodies, such as the European Union Aviation Safety Agency (EASA) and other National Aviation Authorities to develop approved certification documentation demonstrating compliance to all designs and regulatory requirements in support of Type Certification (TC), changes to TC and Continued Airworthiness of the fleet. This role requires a deep understanding of aviation regulations and certification processes, and the ability to work collaboratively to ensure our aircraft are safe and compliant across all stages of their lifecycle. * **Autonomously develop and manage certification plans for large aircraft programs, including new design changes and continued/continuing airworthiness. Work closely with a wide range of internal teams, including design engineers, stress analysts, vendors and design office specialists, to gather the data needed for certification. * * * Provide solutions which are highly innovative and ingenious through application of experience and creativity. * * * Manage varied, multi-ATA and multi-program, subject projects in accordance with business needs and customers' expectations, while ensuring compliance with certification requirements and DOA processes. * * * Support acceptance of individual aircraft by customers and their local authorities. * **Qualified Experience and Training** **Bachelor of Science (BS) Degree in Engineering (Aero, Civil, Mechanical, Electrical) * **Master's Degree in an Engineering discipline. * * * Minimum twenty (20) years total experience in Engineering and/or Airworthiness / Certification roles. * **Familiar with large aircraft operations. * **Previous ODA Unit Member, FAA DER, EASA CVE/DAE. * **Travel Required** * * 5% Domestic and International. * **Excellent communication and negotiation skills in challenging situations including those customer facing. * * * Able to interpret an extensive variety of technical aircraft topics. * * * Able to be flexible with working shifts. * * * Experience complying with regulatory authorities of various countries and distinguishing the similarities and differences. * * * Experience with the Airbus fleet and/or products. * **Familiar with aircraft certification and approvals of documents for TC and aircraft related modifications. * * * Experience with Configuration Management of complex products. * **Required Communication Skills (Spoken, Written, Influencing, Proficiency in Other Languages)** * * Must be able to communicate effectively in English (verbal and written). * * * Displays model writing skills for others to emulate. * * * Understands technical language associated with large aircraft. * **Preferred Communication Skills (Spoken, Written, Influencing, Proficiency in Other Languages)** * * Conversational French and/or German. * **Strong computer background, including MS Excel and Google Suite application experience (Docs, Sheets, Slides, Gmail) * **Decision making includes personal development and complex to high impact operational tasks. * **Often acts independently to uncover and resolve issues associated with the development and implementation of operational programs. Plans projects / programs to accomplish long-range company objectives. Virtual or self-supervisory. * **Onsite ** 60% * * Remote ** 40% * * Vision: able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and engineering drawings. Hearing: able to hear to participate in conversations in person and via teleconference or phone and to hear sounds on production floor including safety warnings or alarms. Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts. Carrying: able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Lifting: able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Pushing / Pulling: able to push and pull small office furniture and some equipment and tools. Sitting: able to sit for long periods of time in meetings, working on computer. Standing: able to stand for discussions in offices or on production floor. Travel: able to travel independently and at short notice. Walking (include routine walking such as to a shared printer to retrieve documents): able to walk through office and production areas including uneven surfaces. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status * * As a leader in our field, Airbus provides relocation assistance for qualified positions and a comprehensive compensation and benefits package. * * As a matter of policy, Airbus does not sponsor visas for US positions unless specified. This position description does not constitute a written or implied contract of employment. * * This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. ****Airbus Americas, Inc. *Remote Type:* On-site *Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.

WARNING about fake job posting scams. There has been a recent wave of scams whereby third parties post fake job openings using a bogus email address that resembles ****************. Under the guise of asking you to fill out an application, the scammers are attempting to gather your personal information. See the Federal Trade Commission's warning on this topic at: ******************************************* The only official source for actual Biolinq job postings/openings is at *********************** . While other job sites (such as LinkedIn, Indeed or Glassdoor) may pull from Biolinq's careers web page, you should visit *********************** to verify the accuracy of the openings found on third party web sites. About the Company Biolinq is a venture-backed digital health company developing a wearable biosensor platform that measures biomarkers important to the management of many clinical conditions including diabetes. This dynamic role is a part of a team of engineers and scientists developing a novel intradermal biosensor technology and the associated software data extraction and rendering SDK that will transform the way people manage their metabolic health. Job Purpose Responsible for activities and area goals through qualification, deployment, and sustaining at the component and finished product level. Duties and Responsibilities Support production monitoring with in-process test execution and trending. Define appropriate alert and action limits based on process performance. Maintain effectiveness of manual test methods through training and certification process. Assess equipment and process for ergonomics and safety. Partner with appropriate vendors to design tooling for production fixturing. Identify system-process interactions using standard tools (p-diagram, SIPOC, VSM). Design or modify existing equipment and fixtures for usability and robustness in manufacturing. Maintain equipment related documentation (manuals, drawings, specifications). Complete line replication and re-qualification activities to support demand, including at key suppliers. Maintain risk documentation (PFMEA) for new failure modes and mitigations. Coordinate with Planning to manage build schedule and material allocation per demand. Provide guidance and training to operators on engineering and V&V builds, as needed. Confirm team comprehension of builds requests, redlines, and special instructions. Develop sustaining cost model for lab supplies, consumables, fixtures, and spare parts. Collect time measurements and process videos to baseline headcount needs. Provide voice of manufacturing to ensure successful transfer from R&D to production. Remediate build documentation for clarity and standardization. Develop hands-on training materials for critical processes and equipment (pipetting, etc.). Develop job aids and other guidance documents to support process adherence. Provide technical training to operators for assigned equipment and processes. Identify and implement mistake-proofing opportunities. Participate in daily meetings to review build plan, metrics, and escalations needing support. Complete standard work activities to monitor production status and identify gaps. Complete periodic work (equipment setup, test verification, etc.) to support build plan. Maintain equipment status (preventative maintenance, corrective maintenance, spare parts) to minimize line disruption (OEE); Revise schedule and activities as appropriate based on history and risk. Monitor and replenish inventory levels of production materials, fixtures, and supplies. Submit purchase requisitions for items required by manufacturing and engineering projects. Support 5S adherence in manufacturing by completing routine audits and identified actions. Resolve technical or logistics issues impacting build delivery. Complete root cause investigation and actions for non-conformances (NCMR, CAPA, SCAR). Monitor production performance through control charting, reject pareto, and review of process capability (SPC). Maintain up-to-date model data (manual time, auto time, cost) for assigned processes. Share performance trends, insights, and strategic insights with cross-functional team for alignment. Develop data collection and integration processes for visibility to production status. Support facility expansion, site transfer, and capacity planning activities. Optimize processes for quality, efficiency, and process repeatability at the lowest cost. Complete standardized work and line balancing activities to optimize production output. Utilize problem solving techniques to identify root causes to technical issues (rejects, equipment availability, etc.) and implement sustainable countermeasures to address them. Investigate device observations and field complaints related to manufacturing process. Collaborate with R&D, Supply Chain, and Quality to drive actions, priorities, and trade-offs required to meet targeted COGS. Complete change impact assessment to align implementation plan for proposed changes. Evaluate and implement 2nd source vendors for manufacturing supply risk. Define appropriate lot size and packaging format for raw materials to scale with demand. Integrate external and internal processes to optimize end-to-end supply chain. Transfer peripheral processes and subassemblies to contract manufacturing sites. Manage manufacturing activities and project execution with external vendors. Support communication, collaboration, and strategic relationship with key suppliers. Develop business processes, infrastructure, and tools to improve manufacturing execution. Requirements Qualifications BS Degree in Mechanical Engineering, Bioengineering, Chemical Engineering, Manufacturing Engineering, or scientific discipline required Minimum 8-12 years related experience, including years of higher-level education (MS, PhD) Experience in design of experiments and statistical tools (ANOVA, t-test, etc.) Experience with Fishbone, A3, 5Y, and other root cause investigation tools Strong understanding of process interactions (inputs, outputs) that are both technical and system related Expertise with scaling manufacturing processes to commercial volumes Experience with budgeting, cost management, modeling, and preparing business proposals (ROI, NPV) for new initiatives seeking executive approval Strong understanding of FDA 21 CFR Part 820 and ISO 13485 quality and regulatory standards Experience with lean manufacturing and six sigma methodologies (preferred) Experience with design for manufacturability concepts and product development lifecycle (preferred) Experience with standard electrical, mechanical, and wet lab test equipment (preferred) Strong leadership skills, including the ability to set goals, allocate resources to appropriate priorities, and provide constructive feedback to foster positive relationships Proficiency in Microsoft Office tools Proficiency with JMP, Minitab, or equivalent statistical software Experience with ERP, MES, and other manufacturing systems Proficiency in BMRAM or equivalent asset management system Expertise in several specialty skillset, including injection molding, welding, analytical chemistry, microscopy, metrology, adhesives, or electronics packaging Proficiency in Solidworks or equivalent CAD software (preferred) Experience with MS Project, Visio, and other project management tools (preferred) Experience with manufacturing database, controls, and vision (preferred) Experience with Altium or other electronics design software (preferred) Role model for what kindness looks like. Actively levels up those on the team through example setting, guidance, and support. Empowers others to make effective decisions Excels at identifying solutions to accelerate team's learning of the problem space Strong organizational planning and ability to hold others accountable. Breaks down silos within and across teams to ensure forward progress and collective success Ability to take decisive action and deliver tangible results in a cross-functional organization. Leadership aptitude of teams, projects, and programs Working Conditions General Office, Laboratory, and Cleanroom environments Expected travel less than 10% Physical Requirements While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, see, talk or hear in a standard office environment. Employee may occasionally lift/or move up to 15 pounds. BENEFITS Medical, dental, vision, health savings account, flexible spending account, life and long-term disability insurance, 401(k) plan, holidays, and PTO. At Biolinq we fully subscribe to the principles of Equal Employment Opportunity. It is our policy to provide employment, compensation, and other benefits related to employment based on qualifications, without regard to race, color, religion, national origin, age, sex, veteran status, genetic information, disability, or any other basis prohibited by federal, state or local law. In accordance with requirements of the Americans with Disabilities Act and applicable federal, state and/or local laws, it is our policy to provide reasonable accommodation upon request during the application process to applicants in order that they may be given a full and fair opportunity to be considered for employment. As an Equal Opportunity Employer, we intend to comply fully with applicable federal, state and/or local employment laws and the information requested on this application will only be used for purposes consistent with those laws. To the extent required by applicable law, The Company maintains a smoke- free workplace. As part of our efforts to ensure fair and equal pay based on merit, Biolinq supports pay transparency internally and during the recruitment process. The U.S. base salary range reasonably expected to be paid for this role is: $125,000 to $145,000. We may ultimately pay more or less than the posted range. Actual compensation packages are based on a variety of factors that are unique to each candidate including, but not limited to: skill set, depth of experience, education, certifications, and specific work location. The range displayed reflects the minimum and maximum target for new hire salaries for the job across the U.S. The total compensation package for this position may also include an annual performance bonus and/or other applicable incentive compensation plans. Biolinq also offers a comprehensive package of benefits including paid time off (vacation, holidays, sick time, parental leave), medical/dental/vision insurance, and 401(k) to eligible employees, subject to the terms and conditions of the applicable plans and any written agreement between the parties. Your recruiter can share more about the total compensation package during the hiring process. Please note: The information contained herein is not intended to be an all-inclusive list of duties and responsibilities of the job, nor are they intended to be an all-inclusive list of the skills and abilities required to do the job. Management may, at its discretion, assign or reassign duties and responsibilities to this job at any time. The duties and responsibilities in this job description may be subject to change at any time due to reasonable accommodation or other reasons. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, or protected veteran status and will not be discriminated against on the basis of disability. If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact Biolinq Talent Acquisition at ******************* Salary Description $125,000-$145,000 per year

Excellent growth opportunity for an individual interested in leading projects and/or project teams as a member of the Commercialization Engineering Team. Position is accountable for contributing to and/or leading Proactive Process Improvement projects, and in supporting all GSC Architectural business units in executing on Maintenance of Business and New Product Development. Job duties include contact with other employees and access confidential and proprietary information and/or other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company's staff, employees, and business relationships. This role will be located at Sherwin-Williams Morikis Global Technology Center located at 6745 Miller Road, Brecksville, OH 44141.