Ship worker jobs in Louisiana - 94 jobs

ATTENTION Applicants are required to complete a civil scan BEFORE you will be considered for employment. Click the Employment Procedure link for additional information. Must be 18 years of age or older. In addition, the following documents are required: Social Security Card Proof of High School Diploma or College Degree or Teaching Certificate Voided Check for Direct Deposit Must be at least 18 years of age and have reliable transportation. Must be willing to work wtih children and assist with homework. 1:1 support for student. Hours are 3:00-5:00 daily DISCLAIMER The preceding job description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees to this job.

Shift: Day Salary Level: Starting $15.05 - Max Rate $24.21 (R6) Under general supervision, this individual is responsible for work of a skilled nature. Essential Duties and Responsibilities include the following. Other duties may be assigned. Record meter readings for all locations on assigned routes and calculate consumption. Investigate and report locations with unusual readings, check for leaks, other meter problems, or unauthorized usage. Locate and repair leaks around meters and clearly define location of leak for possible bill adjustments to customer. Checked assigned vehicle for fluid levels, lights, tires, and cleanliness to assure safety and prevent potential problems. Read and interpret specification and plans. Make material and supply estimates. Plan for material and work schedules before job. Expedite work orders from Superintendents. Keep records when required and make reports when necessary. Responsible for any of the following tasks: Apply coats of paint, varnish, stains, enamel, lacquer, etc. to decorate and/or protect interior or exterior surfaces, trimming and fixtures of buildings, offices, rooms, and other structures. Smoothing surfaces using sandpaper, brushes, or steel wool; removing old paint using paint remover, scraper, wire brush, or blow torch; fill nail holes, cracks, joints with putty, plaster, or other fillers; select pre-mixed paints or mix paint; paint surfaces using hand brush, spray gun, or paint rollers. Install, maintain, and repair water, sewerage, and gas systems. Install and repair pipes, valves, drains, basins, tubes, faucet, laboratories, sinks, gates, hydrant, water coolers, dishwasher, and other plumbing fixtures and equipment. Repair old plumbing; replace broken parts, fixtures, pipelines, renewing pipes and valves. Clean and open drains and other lines. Repair and make minor adjustments to steam pumps and regulators, air compressors, water pumps, and heaters, automatic stoker, and steam tables. May be responsible for moderate level welding projects. Proficiently use a radio signal transmitter/receiver pipe and cable locator to trace and mark mains, feeder, meter, etc. Use metal detector or magnetic dip needle to locate valve boxes. Supervise other employees of the work crew. Drive and/or operate equipment such as a chain saw, concrete breaker, flat bed dump truck and six-yard dump truck, as well as equipment listed under Operator II, if needed. Perform work of a skilled level associated with concrete finishing for purposes of street and sidewalk repair; and may be required to finish concrete for the construction of ramps, retaining walls, floors, foundations, driveways, etc.; and will lay wire mesh and reinforcement. Must be able to perform duties of a Trades Worker I & II. Perform any other assigned duties. Supervisory Responsibilities May be responsible for supervisory duties of Trades Worker I and II in crew. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to be on 24 hour call. Working knowledge of meters, valves, gas and diesel engines, and location equipment; and operation of jack hammers, power saws, tapping and boring machine. Must know the flow rate in gallons per minute (GPM) for the different meter sizes in the system. Must know the severity of any type of leak in the system in order to report whether it needs repair immediately or later. Must be capable of identifying and reporting the exact location of the leak in relation to the side of the street, the nearest intersection, and the street address. General knowledge of geographical layout of the City, i.e. street locations, water mains, service lines. Ability to use independent judgment concerning maintenance and repairs. Good eye-hand coordination and good form and space perception. Ability to effectively communicate with other employees; and to read and comprehend instructions. Knowledge of painting techniques and processes. Ability to use independent judgment concerning maintenance and repairs. Ability to effectively communicate with other employees, and to comprehend instructions. Skilled in use and care of tools and equipment of plumbing maintenance. Knowledge of plumbing maintenance and repair procedures and equipment. Knowledge of application of a variety of plumbing equipment. Regular prompt attendance is an essential function to this position. The ability to get along and promote a harmonious working environment with vendors, supervisors, citizens, and co-workers is an essential function of this position. Education and/or Experience High School diploma or GED; and one year of work related experience. Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations Valid Louisiana Driver's License Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must frequently lift and/or move up to 50 pounds. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

General Purpose: This position is responsible for evaluating the quality of the product being produced, report deficiencies to Supervisor so they can take appropriate action. Sorter must be able to keep up with line speed so they can act in a quick manner over quality issues. Inform Supervisor of any mechanical breakdowns or production problems. Can make product pathology dispositions and keep food safety dispositions a priority. Conduct workflow for the New Poultry Inspection System (NPIS) Evisceration operation. Role Responsibilities and Qualifications: Employee will need to be able to: • Lift and stack up to 80 pounds • Work at a fast pace for up to 3 hours at a time • Work in a warm, dusty environment for extended periods. • Work in a cold, moist environment for extended periods. • Push and/or Pull heavy objects • Tolerate the sight of continuous moving objects • Walk up and down multiple flights of stairs multiple times daily. • Wash out carcasses in the wash cabinet, as well as by hand • Cut and salvage assigned components of the animal • Responsible for keeping work area as clean as possible throughout the shift • Frequently rotates positions within the Salvage Line with other co-workers • Inspect carcasses for quality • Receive all carcasses that were culled during processing • Always keep processing line shackles full • Perform rework as needed • Work directly with the USDA inspector Education and/or Experience: • No prior experience or training • Must be 18 years of age. • Legally authorized to work in the United States. Essential Skills and Experience: • Be dependable and honest • Time management: the ability to organize and manage multiple priorities • Strong team player • Commitment to company values • Be able to work overtime when needed to including Saturday • Wear employer-specified protective gear, including gloves, face/eye shields, aprons, boots, etc. (some of which to be supplied by employer). • Exposure to chemical cleaning solution (with protective gear) • Perform varying tasks while standing, lifting, crouching, etc. during long periods of time. • Perform all tasks safely and in a manner that will not create or pose a direct threat to the health and/or safety of the worker or any other person. Physical Demands and work environment: The physical and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 80 pounds. Specific vision abilities required by this job include close vision and depth perception. Work environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly exposed to wet and/or humid conditions; moving mechanical parts; fumes or airborne particles and extreme cold. The employee is occasionally exposed to high, precarious places; toxic or caustic chemicals; outside weather conditions and extreme heat. The noise level in the work environment is usually loud.

Job Title: Roadway Worker In Charge (RWIC) Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: Accountability: Accept full responsibility for self and contribution as a team member. Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary. Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making. Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks. Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner. Customer Service Focus: Ability to provide service excellence to internal and/or external clients. Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences. Initiative: Ability to identify what needs to be done and take action before being asked. Innovativeness: Ability to devise new plans for quality excellence. Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery. Organization: Ability to maintain materials and/or records in a clean and ordered manner. Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks. Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity). Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables. Thoroughness: Ability to ensure that one's work is complete and accurate. Job Requirements: Proficient computer skills in basic email, phone, and text message applications. Proficient computer skills in Android OS; on tablet & smart phone. Proficient computer skills in Citrix Applications. Strong oral and written communication skills. Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety. High level of accuracy and attention to detail; well organized. Demonstrated ability to develop and maintain strong client relationships. Ability to travel for extended periods of time; sometimes month(s) at a time. Ability to successfully complete Federal, Client, and/or Company Specific Training. Job Duties: Provide jobsite coordination. Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel. Provide clear, concise, and thorough job briefings with all personnel on each job site. Enforce all Railroad, State, and Federal Policies. Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies. Enforce Contractor training requirements. Submit daily field reports detailing Contractor and/or Railroad activities. Provide On-Track Safety in accordance with 49 CFR 214 Federal Regulations for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT Rail Divisions, Railroad Suppliers, Railroad Contractors, and/or Railroad Consultants. Work Environment: This job operates in a field environment. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to hear, speak, read, and write clearly in English. Must be able to drive long distances and/or travel by other modes as necessary. Must be able to stand for long periods of time and/or walk on level/uneven ground. Must be able to see up close, distances, colors and have use of peripheral vision and depth perception. Must be able to tolerate extreme heat/cold temperatures. Must be able to tolerate dusty/noisy conditions. Must be able to lift and/or move up to 50 pounds. Benefits: Medical, Dental, Vision, Life Insurance Short Term, Long Term Disability Insurance Paid Vacation and Holidays 401(k) Retirement Plan Keywords: Assistant Division Engineer (ADE), Assistant General Manager (AGM), Assistant Roadmaster, Bridge Inspector, Bridge Manager, Bridge Maintainer, Bridge Supervisor, Division Engineer (DE), Employee In Charge (EIC), Flagger, Flagging, Flagman, Flagmen, Flagperson, Foreman, Foremen, General Manager (GM), Maintenance Of Way (MOW), Manager Track Maintenance (MTM), Manager Track Projects (MTP), Rail, Railroad, Railroad Project Manager, Railway, Railway Project Manager, Roadmaster, Roadway Worker, Roadway Worker In Charge (RWIC), Roadway Worker Protection (RWP), Safety, Signal Inspector, Signal Maintainer, Signal Manager, Signal Supervisor, Track Inspector, Track Maintainer, Track Manager, Track Supervisor. Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training.

Job Title: Roadway Worker In Charge (RWIC) Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: Accountability: Accept full responsibility for self and contribution as a team member. Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary. Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making. Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks. Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner. Customer Service Focus: Ability to provide service excellence to internal and/or external clients. Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences. Initiative: Ability to identify what needs to be done and take action before being asked. Innovativeness: Ability to devise new plans for quality excellence. Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery. Organization: Ability to maintain materials and/or records in a clean and ordered manner. Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks. Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity). Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables. Thoroughness: Ability to ensure that one's work is complete and accurate. Job Requirements: Proficient computer skills in basic email, phone, and text message applications. Proficient computer skills in Android OS; on tablet & smart phone. Proficient computer skills in Citrix Applications. Strong oral and written communication skills. Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety. High level of accuracy and attention to detail; well organized. Demonstrated ability to develop and maintain strong client relationships. Ability to travel for extended periods of time; sometimes month(s) at a time. Ability to successfully complete Federal, Client, and/or Company Specific Training. Job Duties: Provide jobsite coordination. Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel. Provide clear, concise, and thorough job briefings with all personnel on each job site. Enforce all Railroad, State, and Federal Policies. Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies. Enforce Contractor training requirements. Submit daily field reports detailing Contractor and/or Railroad activities. Provide On-Track Safety in accordance with 49 CFR 214 Federal Regulations for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT Rail Divisions, Railroad Suppliers, Railroad Contractors, and/or Railroad Consultants. Work Environment: This job operates in a field environment. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to hear, speak, read, and write clearly in English. Must be able to drive long distances and/or travel by other modes as necessary. Must be able to stand for long periods of time and/or walk on level/uneven ground. Must be able to see up close, distances, colors and have use of peripheral vision and depth perception. Must be able to tolerate extreme heat/cold temperatures. Must be able to tolerate dusty/noisy conditions. Must be able to lift and/or move up to 50 pounds. Benefits: Medical, Dental, Vision, Life Insurance Short Term, Long Term Disability Insurance Paid Vacation and Holidays 401(k) Retirement Plan Keywords: Assistant Division Engineer (ADE), Assistant General Manager (AGM), Assistant Roadmaster, Bridge Inspector, Bridge Manager, Bridge Maintainer, Bridge Supervisor, Division Engineer (DE), Employee In Charge (EIC), Flagger, Flagging, Flagman, Flagmen, Flagperson, Foreman, Foremen, General Manager (GM), Maintenance Of Way (MOW), Manager Track Maintenance (MTM), Manager Track Projects (MTP), Rail, Railroad, Railroad Project Manager, Railway, Railway Project Manager, Roadmaster, Roadway Worker, Roadway Worker In Charge (RWIC), Roadway Worker Protection (RWP), Safety, Signal Inspector, Signal Maintainer, Signal Manager, Signal Supervisor, Track Inspector, Track Maintainer, Track Manager, Track Supervisor. Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training. Job Posted by ApplicantPro

Apply Meatcutting Worker Department of Defense Defense Commissary Agency Apply Print Share * * * * Save * This job is open to * Requirements * How you will be evaluated * Required documents * How to apply Serves as the Meatcutting Worker in a Defense Commissary Agency (DeCA) location. The primary purpose of this position is to Assist full performance meatcutters by performing the simpler tasks when processing beef, pork, veal, and lamb into retail and ready-to-eat cuts for sale to patrons. This is an open-continuous announcement with an established initial cut-off date 30 days after the open date of the announcement. Please see the "How You Will Be Evaluated" section for more information. Summary Serves as the Meatcutting Worker in a Defense Commissary Agency (DeCA) location. The primary purpose of this position is to Assist full performance meatcutters by performing the simpler tasks when processing beef, pork, veal, and lamb into retail and ready-to-eat cuts for sale to patrons. This is an open-continuous announcement with an established initial cut-off date 30 days after the open date of the announcement. Please see the "How You Will Be Evaluated" section for more information. Overview Help Accepting applications Open & closing dates 10/24/2025 to 03/01/2026 Salary $20.22 to - $30.49 per hour NTE 48-64 hours biweekly Pay scale & grade WG 5 Locations Fort Rucker, AL Many vacancies Barksdale AFB, LA Many vacancies Fort Polk, LA Many vacancies New Orleans, LA Many vacancies Show morefewer locations (4) Columbus AFB, MS Many vacancies Gulfport, MS Many vacancies Keesler AFB, MS Many vacancies Meridian, MS Many vacancies Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Permanent Work schedule Part-time - Schedule varies by location and includes days, nights, weekends, and holidays Service Competitive Promotion potential None Job family (Series) * 7407 Meatcutting Supervisory status No Security clearance Other Drug test No Position sensitivity and risk Non-sensitive (NS)/Low Risk Trust determination process * Suitability/Fitness Financial disclosure No Bargaining unit status Yes Announcement number DECA-26-12807278-OC-DE Control number 848760100 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Career transition (CTAP, ICTAP, RPL) Federal employees whose job, agency or department was eliminated and are eligible for priority over other applicants. Military spouses Military spouses of active duty service members or whose spouse is 100 percent disabled or died on active duty. Clarification from the agency This establishes a list of applicants to fill vacancies as they occur in the 90 days after the announcement closes. Duties Help Position responsibilities include: * Assist journeyman meat cutters by performing the simpler tasks when processing beef, pork, veal, and lamb into retail and ready to eat cuts for sale to patrons. * Tray, wrap, weigh, and price cuts using automatic or manual wrapping machines. * Ensure correct prices by referencing price lists. * Replenish stock in display cases and rotates product to ensure wholesomeness. * Use, clean, maintain, and sharpens a variety of hand tools and power equipment. * Clean and sanitize work area to maintain required standards of cleanliness and sanitation. Read the entire job announcement. Focus on the following sections to understand whether or not you qualify for the position. * Duties and Qualifications * How to Apply (including a preview of the assessment questionnaire, if applicable) * How You Will be Evaluated Your resume must thoroughly describe how your skills and experiences align to the criteria defined in the Qualifications section of this announcement and it must support your responses to the assessment questionnaire. We do not assume you have the necessary experience to successfully perform in this job regardless of your employment history or academic career. Requirements Help Conditions of employment * Be a U.S. citizen or national. Applicants with a Permanent Resident Card are authorized to live and work in the U.S. but are not eligible for employment in positions requiring U.S. citizenship. If selected, proof of citizenship is required. * Meet minimum age requirement. See Additional Information. * Males born after 12-31-1959 must be registered with or exempt from Selective Service. * Appointment is subject to successful verification of identity and employment eligibility through E-Verify. Learn more about E-Verify, including your rights and responsibilities, at ************************** * Appointment is subject to a favorable suitability or fitness outcome, as determined by a completed background investigation. New federal employees will be fingerprinted. * Be able to obtain and maintain clearance eligibility based on the appropriate background investigation. * May be subject to a probationary/trial period. * Direct deposit of pay is required. * Meet the physical requirements identified in the Qualifications section. Qualifications You must meet qualifications and requirements by the closing date. Per the OPM Qualification System for Trades and Labor Occupations, how you gained the skill and/or knowledge or the length of time you have spent in this line of work is not as important as what you can do and that you have the required ability or potential to successfully perform the duties of this position. Your resume should show your specific knowledge, skill, and abilities for this position in relation to each of the elements being measured. Examples of qualifying experience: * Working in the retail meat department traying, wrapping and weighing meat for sale to patrons. * Cutting, trimming and boning meat. * Using hand tools and operating powered meat cutting equipment. You will receive credit for all relevant qualifying experience (paid and unpaid), including volunteer work done through National Service program (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Physical requirements: (1) Continuously walk, stand, bend, stoop, stretch, and reach. (2) Lift up to 50 pounds independently and occasionally over 50 pounds with assistance. You will attest to your ability to perform these physical requirements in the Questionnaire. As part of the online application process, you will respond to a series of questions designed to evaluate what you can do against what the work requires (job element method). This job has one critical element, called the screen-out element (SOE). The SOE addresses the critical knowledge, skill, and abilities essential to satisfactory job performance. Applicants who clearly fail to meet the lowest acceptable requirement in the SOE are rated ineligible and receive no further consideration. The job elements for this job are: * Ability to do the Work of the Position Without More than Normal Supervision * Dexterity and Safety * Work Practices (includes keeping things neat, clean and in order) * Ability to Interpret Instructions, Specifications, etc. (other than blueprints) * Materials * Technical Practice * Use and maintain hand and power tools Overtime: Occasional Bargaining Unit Status: Covered Fair Labor Standards Act (FLSA): Nonexempt Obligated Position: No Those retired under CSRS or FERS considered: No. DoD criteria not met. Work environment: May be subject to temperature changes based on opening and closing doors, working on loading docks, outside, and in refrigerated rooms. May be exposed to hot or cold weather, damp conditions, or drafty conditions. There is a danger of minor cuts, scrapes, bruises or heat sealer burns. Telework eligible: No Remote work eligible: No Education You may not use education to qualify for this position. Additional information Executive Order 12564 requires a federal workplace to be free of illegal drugs and prohibits the use of illegal drugs both on and off duty by federal employees. As a reminder, marijuana is still classified as an illegal drug by the Federal government and is prohibited for use by Federal employees even if such use is legal in the state where the Federal employee resides and/or works. The Defense Commissary Agency is a Drug-Free Federal Workplace where the use of illegal drugs will not be tolerated and may result in penalties up to and including removal from Federal service. * The salary range at the beginning of this announcement reflects Step 1 of the listed location with the lowest salary to the Step 5 of the listed location with the highest salary. * Upon first appointment to a civilian position in the Federal government, you are entitled only to the lowest step (Step 1) of the grade for which selected. The display of a salary range on this announcement does not suggest or convey an entitlement to a higher rate of pay. Refer to the Appropriated Fund Schedules page to find the salary range for a specific location. * The minimum age requirement is generally 18 years. Employing those under 18 may be possible under certain circumstances. If under 18 years of age, ensure you provide documentation showing how you are eligible. * Applicants with financial difficulty are not automatically removed from consideration. * Selectees are required to complete an online onboarding process. * Retired military service members cannot be appointed to a Department of Defense (DoD) civilian position within 180 days of their retirement date. 5 United States Code 3326. * Current active duty armed forces personnel within 120 days of separation must submit written documentation from the armed forces certifying that the service member is expected to be separated from active duty service not later than 120 days after the date the certification is signed. The document must include the following information: (1) service member's name, (2) date of the expected separation from active duty, (3) expected character of the active duty service at separation, (4) pay grade/rank/rate at separation, (5) dates of active duty service, and (6) any campaign or expeditionary medals received. You must submit the DD-214 when it becomes available. The following may result in a rating of ineligible. Ineligible applicants receive no consideration. * Submitting an incomplete application package may result in your not being considered for this position. Your resume must reflect that you are either Part-Time with the number of hours listed, Full Time, or 40 hours per week as your work schedule. If you fail to provide this information in your resume, your resume may be considered as incomplete. * Submitting encrypted documents or uploading Adobe portfolio documents. * Submitting any document that contains a photo or image of you. * Including social media links, inappropriate material or content, classified or government sensitive information, or personal information such as age, gender, race, religion, or social security number on your resume. * Overstating your qualifications and/or experience in your application materials or questionnaire responses. * Deliberately attempting to falsify your application information, such as copying portions of this announcement into your resume. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. How you will be evaluated You will be evaluated for this job based on how well you meet the qualifications above. Open-Continuous Cut-off Information: An initial cut-off date of 30 days after the open date of the announcement will be used to evaluate candidates for the initial available vacancies. Any application received after the initial cut-off date will only be considered should additional vacancies be received after the initial cut-off date. If additional vacancies are received after the initial cut-off date, ALL applicants that have applied will be evaluated/re-evaluated and ranked as stated within the Evaluation statement in the announcement. HR reviews your documents to determine if you are qualified and meet requirements. Your questionnaire score is a preliminary measure of how well your background matches the required competencies. Under category rating procedures you are placed into one of three categories based on the evaluation results: Best Qualified -Candidates who possess the type and quality of experience that substantially exceeds the position's minimum qualifications, including all selective placement factors and appropriate quality ranking factors. Highly Qualified - Candidates who possess the type and quality of experience that exceeds the position's minimum qualifications. Qualified- Candidates who meet the minimum qualifications and are proficient in some but not all of the position's requirements. Candidates in the best qualified category are referred to hiring managers before candidates in other categories. Within the best qualified category, candidates are referred in the following order: adjudicated veterans' preference candidates with 10-point preference, adjudicated veterans' preference candidates with other than 10-point preference, military spouse preference candidates, and candidates with no preference. Selections are subject to restrictions of the DoD referral system for displaced employees. Neither preference nor priority entitles you to a Federal job. You must apply, meet the qualification standards and all additional requirements, and submit all necessary documents. Military spouses must be in the best qualified group in order to receive military spouse preference Veterans Preference: * You must provide a copy of your DD-214 Certificate of Release or Discharge from Active Duty or other acceptable documentation that includes your character of service. The member 4 copy is preferred. Contact the National Archives or your military personnel records center to request a copy of your DD-214. * Those claiming 10-point preference must submit a completed SF 15 Application for 10-Point Veteran Preference (For Veterans and Relatives of Veterans) and all required proof listed on the reverse of the SF 15. Note that a letter from the VA that contains the following may be sufficient instead of a SF-15: Dates of service, Discharge status, and Disability rating. Contact the Department of Veterans Affairs or call ************** to obtain a copy of the VA letter establishing proof of disability. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. Required documents Required Documents Help Resume: IMPORTANT UPDATE: Your resume must not exceed two (2) pages. If your resume exceeds the two-page limit, you will be removed from consideration for this announcement. The resume and required supporting documentation should provide the minimum qualifications and relevant experience for the announced position. Additional guidance on writing a federal resume can be found at: USAJOBS Help Center - How do I write a resume for a federal job? Page margins should be 0.5 inches, font styles must be legible, and consider using 14-point size font for titles and 10-point for the main text. The resume must not be more than 5MB and should be saved and uploaded as a PDF to maintain formatting and number of pages. At a minimum, your resume MUST contain: * Your name, address, phone, email address. * Job Title. Series and grade (Federal Positions only). * For each position held including employment beginning and ending dates (Month/Year). * Your resume should reflect a description of duties performed and that you are either Part-Time with the number of hours per week listed, Full Time or 40 hours per week as your work schedule. Questionnaire. Preview at ********************************************************* SF 50 Notification of Personnel Action. Required for current and former federal employees. Submit a copy of your most recent SF 50 showing your current position title, pay plan-series-grade, tenure and position occupied. ICTAP eligibility: Submit (1) a copy of your agency specific ICTAP eligibility notice or a copy of your separation personnel action form and (2) a copy of your most recent performance appraisal and (3) a copy of your most recent SF 50 or agency notification of personnel action showing your current position, grade level, and duty location. Separation personnel actions do not include a certificate/notice of expected separation. Priority Placement Program (PPP) DoD Retained Grade Preference (RGP) eligibility: 1. Submit a signed Retained Grade PPP Self-Certification Checklist DD3145-1 (whs.mil. 2. a copy of your Notification of Personnel Action (SF-50) effecting the placement in retained grade status; or a copy of the notification letter you received regarding the RIF or classification downgrade. Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible (PPP DoD MRNG): In order to receive this preference, you must choose the Military Reserve and National Guard Technician eligibility, and fill out and submit the Military Reserve and National Guard Technician PPP Self-Certification Checklist and copies of the appropriate documentation. Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Preference Eligible Tech Receiving Disability Retirement (PPP DoD MR & NG):In order to receive this preference, you must choose the Military Reserve (MR) and National Guard (NG) Preference Eligible Tech Receiving Disability Retirement eligibility and submit a completed Military Reserve and National Guard Technician Disability PPP Self-Certification Checklist and copies of the appropriate documentation, such as the notification letter you received that states you are no longer eligible for Reserve membership due to a service-connected disability. Military Spouse Preference: Submit (1) the Self-Certification Checklist and (2) proof of marriage to the military service member (e.g., marriage certificate, marriage license), and (3) a copy of the military service member's PCS orders. Non-Competitive Military Spouse Preference: Submit (1) Marriage certificate and (2) a copy of your spouse's active Military Orders and (3) DD-214 - Certificate of Release or Discharge from Active Duty (if Applicable) and (4) DD1300 - Report of Casualty (If applicable). How to Apply Help To receive consideration for the initial cut-off date of 30 days after the open date of announcement, the complete application package must be submitted by 11:59 PM (EST) of that established date. All applications received thereafter will be considered should additional vacancies be received after the initial cut-off date in which additional cut-off dates will be established. Your complete application package must be received by 11:59 PM ET on 03/01/2026. You are responsible for verifying your application package is complete, accurate, and submitted timely. As uploaded documents may take one or more hours to clear the virus scan, plan accordingly to ensure your application process is complete and your application package is submitted by the specified closing date and time. To begin, click Apply to access an online application. Follow the prompts to select your resume, required documents, and/or other supporting documents. You need to be logged into your USAJOBS account to apply or create an account before applying. You will be taken to an online application. Follow all prompts and complete the online application, verify you've included all required and supporting documentation, and submit your application. Additional information on how to complete the online application process and submit your online application is found at the USA Staffing Applicant Resource Center. To receive consideration, you must complete all steps of the application process. You can verify your application status by logging into your USAJOBS account, selecting the Application Status link, and then selecting the More Information link for this position. The Application Status page displays your application status, the documents received and processed, and your questionnaire responses. Agency contact information DeCA DE East Servicing Team Phone ************ Fax ************ Email *************************** Address Defense Commissary Agency East 1300 E Avenue Fort Lee, VA 22380 US Next steps Notices post to your USAJOBS account and are emailed to you. You can expect to receive a notice when you complete the application process, when your qualifications status is determined (qualified or not qualified), and when your referral status is determined (referred or not). If you are referred but not selected, you can expect to receive a final notice approximately 180 days after the announcement closes. If a vacancy for the location(s) you selected does not occur within 90 days after this announcement closes, you may not receive a qualifications status or referral status notice. The hiring manager may choose to conduct interviews and may conduct telephone interviews to preclude travel hardships for applicants. Someone from the hiring agency (i.e., DeCA) will contact you if the hiring manager decides to interview you. Should you receive a tentative job offer, be aware such offers are automatically withdrawn if you fail to (1) record an acceptance or declination by the response date provided in the offer notice and/or (2) meet any pre-employment requirements, including a scheduled appointment. If you receive a job offer, use a computer to submit your response rather than a mobile/cell phone. Fair and transparent The Federal hiring process is set up to be fair and transparent. Please read the following guidance. Criminal history inquiries Equal Employment Opportunity (EEO) Policy Financial suitability New employee probationary period Privacy Act Reasonable accommodation policy Selective Service Signature and false statements Social security number request Required Documents Help Resume: IMPORTANT UPDATE: Your resume must not exceed two (2) pages. If your resume exceeds the two-page limit, you will be removed from consideration for this announcement. The resume and required supporting documentation should provide the minimum qualifications and relevant experience for the announced position. Additional guidance on writing a federal resume can be found at: USAJOBS Help Center - How do I write a resume for a federal job? Page margins should be 0.5 inches, font styles must be legible, and consider using 14-point size font for titles and 10-point for the main text. The resume must not be more than 5MB and should be saved and uploaded as a PDF to maintain formatting and number of pages. At a minimum, your resume MUST contain: * Your name, address, phone, email address. * Job Title. Series and grade (Federal Positions only). * For each position held including employment beginning and ending dates (Month/Year). * Your resume should reflect a description of duties performed and that you are either Part-Time with the number of hours per week listed, Full Time or 40 hours per week as your work schedule. Questionnaire. Preview at ********************************************************* SF 50 Notification of Personnel Action. Required for current and former federal employees. Submit a copy of your most recent SF 50 showing your current position title, pay plan-series-grade, tenure and position occupied. ICTAP eligibility: Submit (1) a copy of your agency specific ICTAP eligibility notice or a copy of your separation personnel action form and (2) a copy of your most recent performance appraisal and (3) a copy of your most recent SF 50 or agency notification of personnel action showing your current position, grade level, and duty location. Separation personnel actions do not include a certificate/notice of expected separation. Priority Placement Program (PPP) DoD Retained Grade Preference (RGP) eligibility: 1. Submit a signed Retained Grade PPP Self-Certification Checklist DD3145-1 (whs.mil. 2. a copy of your Notification of Personnel Action (SF-50) effecting the placement in retained grade status; or a copy of the notification letter you received regarding the RIF or classification downgrade. Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible (PPP DoD MRNG): In order to receive this preference, you must choose the Military Reserve and National Guard Technician eligibility, and fill out and submit the Military Reserve and National Guard Technician PPP Self-Certification Checklist and copies of the appropriate documentation. Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Preference Eligible Tech Receiving Disability Retirement (PPP DoD MR & NG):In order to receive this preference, you must choose the Military Reserve (MR) and National Guard (NG) Preference Eligible Tech Receiving Disability Retirement eligibility and submit a completed Military Reserve and National Guard Technician Disability PPP Self-Certification Checklist and copies of the appropriate documentation, such as the notification letter you received that states you are no longer eligible for Reserve membership due to a service-connected disability. Military Spouse Preference: Submit (1) the Self-Certification Checklist and (2) proof of marriage to the military service member (e.g., marriage certificate, marriage license), and (3) a copy of the military service member's PCS orders. Non-Competitive Military Spouse Preference: Submit (1) Marriage certificate and (2) a copy of your spouse's active Military Orders and (3) DD-214 - Certificate of Release or Discharge from Active Duty (if Applicable) and (4) DD1300 - Report of Casualty (If applicable).

General Purpose: This position is responsible for evaluating the quality of the product being produced, report deficiencies to Supervisor so they can take appropriate action. Sorter must be able to keep up with line speed so they can act in a quick manner over quality issues. Inform Supervisor of any mechanical breakdowns or production problems. Can make product pathology dispositions and keep food safety dispositions a priority. Conduct workflow for the New Poultry Inspection System (NPIS) Evisceration operation. Role Responsibilities and Qualifications: Employee will need to be able to: • Lift and stack up to 80 pounds • Work at a fast pace for up to 3 hours at a time • Work in a warm, dusty environment for extended periods. • Work in a cold, moist environment for extended periods. • Push and/or Pull heavy objects • Tolerate the sight of continuous moving objects • Walk up and down multiple flights of stairs multiple times daily. • Wash out carcasses in the wash cabinet, as well as by hand • Cut and salvage assigned components of the animal • Responsible for keeping work area as clean as possible throughout the shift • Frequently rotates positions within the Salvage Line with other co-workers • Inspect carcasses for quality • Receive all carcasses that were culled during processing • Always keep processing line shackles full • Perform rework as needed • Work directly with the USDA inspector Education and/or Experience: • No prior experience or training • Must be 18 years of age. • Legally authorized to work in the United States. Essential Skills and Experience: • Be dependable and honest • Time management: the ability to organize and manage multiple priorities • Strong team player • Commitment to company values • Be able to work overtime when needed to including Saturday • Wear employer-specified protective gear, including gloves, face/eye shields, aprons, boots, etc. (some of which to be supplied by employer). • Exposure to chemical cleaning solution (with protective gear) • Perform varying tasks while standing, lifting, crouching, etc. during long periods of time. • Perform all tasks safely and in a manner that will not create or pose a direct threat to the health and/or safety of the worker or any other person. Physical Demands and work environment: The physical and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 80 pounds. Specific vision abilities required by this job include close vision and depth perception. Work environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly exposed to wet and/or humid conditions; moving mechanical parts; fumes or airborne particles and extreme cold. The employee is occasionally exposed to high, precarious places; toxic or caustic chemicals; outside weather conditions and extreme heat. The noise level in the work environment is usually loud.

For a description, visit PDF: ******************** brla. gov/ess/EmploymentOpportunities/~/DocumentViewer. ashx?token=5bfPpvMx1TitjuNP/LKcvaIwcLEbtE+YxvSqpGJNeW8=&Serial=d2m+ck Xq0dsr01AMD7ezCw==&hash=7E0x1B5b2Ae/av UMpwMBFOsewGGygfx4ldGSzE18LUY/4PgTo65vICsPEQLqqUPX6EGAuq8tJdJyRMs9XW/yUoImtg/3gEgE

The Center for Social Justice is a center based at Loyola University College of Law in New Orleans, Louisiana that provides capital appellate and post-conviction representation to indigent people on Louisiana's death row, as well as juveniles facing sentences of life without parole. CSJ provides high-quality representation to a full caseload of clients in state and federal courts throughout Louisiana, with the assistance of students at Loyola. We are a small office that promotes collaboration, fairness, and social justice. This is a full-time exempt staff position and compensation range is set by the Louisiana Public Defender Oversight Board and is dependent upon experience. This position is located Louisiana though traveling extensively is required. Substantial overnight travel and work outside of business hours, including evenings and weekends. While our office is in New Orleans, our cases most in need of investigation are mostly geographically situated in central and northern Louisiana, and include witnesses and records all over the country. Examples of Duties * The Mitigation Specialist will play an essential role in investigating, including fact investigating, and developing our clients' mitigation. * Primarily focus on capital post-conviction cases but may include non-capital cases such as Montgomery resentencing hearings. * Commitment to upholding mitigation best practices as outlined in the ABA Guidelines for Mitigation Function of Defense Teams. * Commitment to cultural competency and centering the humanity of all of our clients and their family members, as well as a commitment to anti-racism. * Other duties as assigned. Typical Qualifications * Bachelor's or equivalent relevant experience. Mitigation is an interdisciplinary field and we encourage people with backgrounds in journalism, anthropology, sociology, psychology, law, critical race studies, gender studies, other academic disciplines, or relevant lived experience to apply. * A minimum of two years' experience of field interviewing, records collection and digesting, organizing case files, conducting social history research, assisting with court proceedings (trials, hearings), handling multi-generational investigations (including genograms and chronologies) and/or drafting detailed memoranda and reports. * Ability to coordinate multiple ongoing events and prioritize tasks in a high-stakes environment. * Communicate effectively with clients, family members, experts of all kinds, witnesses, colleagues, office staff and court personnel. * Exceptional attention to detail. * Familiarity with the DSM-5 and the AAIDD Manual and identifying signs and symptoms of mental health disorders. * Must possess and maintain a current valid driver's license as a condition of employment, and must also be able to successfully pass any driver background information investigation and any driver education courses required by Risk Management. PHYSICAL REQUIREMENTS: * Ability to perform the essential functions of the position with or without reasonable accommodations. * Extensive driving and traveling. How to Apply Submit an application package via Loyola's application system, NeoEd, containing the following: 1. Cover letter. The cover letter should be no more than 3 pages, and should detail your qualifications under the selection criteria section above. 2. Resume 3. Writing sample. The writing sample must be fully written by the applicant, and should be no more than 10 pages. 4. Email contacts for 3 References.

Title: Working Leaderman (Structural) Job Overview: A Working Leaderman (Structural) is responsible for directing his/her workforce in the successful implementation of craft-specific activities as it relates to associated shipbuilding and/or repair functions. Key Responsibilities: Utilizes knowledge of the working characteristics of metallic and non-metallic materials, including the specifications of the equipment to be used in the welding process. Performs tank testing and associated duties as required. Experience: At least Five (5) years of assembly/prefab structural welding/fitting experience. Prior supervision experience is preferred. Skills and Abilities: Basic knowledge of welding/fitting specific processes and techniques in addition to being familiar with standard marine practices and general specifications for construction. Experience in structural fabrication and the ability to read/understand drawings is required. Previous supervisory experience is a plus. Must be able to communicate effectively with employees, work well with others, and have the ability to plan/schedule craft-specific work tasks. Must have a strong focus on quality, production, safety, and environmental aspects of work being performed. Bollinger is an equal opportunity employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, and without regard to sexual orientation and gender identity.

Job Title: Trades Worker I Salary Level: Start: $12.65 - Max Rate: $20.35 FLSA Status: Non-exempt - Hourly (34 Hours/Week) Under general supervision, this individual is responsible for duties of a semi-skilled level. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Responsible for semi-skilled electrical work such as: wiring, replacing fuses and bulbs, and conduit work. Use of power tools and hand tools. Operation and maintenance of machinery including jack hammer, power saw, boring and tapping machine. Store tools, supplies, materials, and equipment when not in use. Assist in installation and repair of Water and Wastewater lines; joining and sealing of pipes; assist in construction of manholes and forms; and repair or installation of fire hydrants. Knowledge of general servicing schedules of vehicles and equipment such as greasing and lubing; oil changes; repair of tires; air, oil, and fuel filter; etc. Dig out, grade and fill ditches and potholes. Perform any other duties as assigned. SUPERVISORY RESPONSIBILITIES This individual has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Knowledge of tools and test instruments and equipment used in construction and electrical work. Knowledge to operate hand, air, and electric tools and equipment necessary for repair and maintenance of vehicles. Ability to understand and carry out oral and written instructions. Regular prompt attendance is an essential function to this position. The ability to get along and promote a harmonious working environment with vendors, supervisors, citizens, and co-workers is an essential function of this position. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education or experience. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS Must possess a valid Louisiana Driver's License. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must regularly lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to wet and/or humid conditions, moving mechanical parts, fumes or airborne particles, toxic or caustic chemicals, and risk of electrical shock. The employee is occasionally exposed to outside weather conditions and vibration. The noise level in the work environment is usually loud.

Job Title: Roadway Worker In Charge (RWIC) Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: * Accountability: Accept full responsibility for self and contribution as a team member. * Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary. * Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making. * Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks. * Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner. * Customer Service Focus: Ability to provide service excellence to internal and/or external clients. * Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences. * Initiative: Ability to identify what needs to be done and take action before being asked. * Innovativeness: Ability to devise new plans for quality excellence. * Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery. * Organization: Ability to maintain materials and/or records in a clean and ordered manner. * Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks. * Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity). * Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables. * Thoroughness: Ability to ensure that one's work is complete and accurate. Job Requirements: * Proficient computer skills in basic email, phone, and text message applications. * Proficient computer skills in Android OS; on tablet & smart phone. * Proficient computer skills in Citrix Applications. * Strong oral and written communication skills. * Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety. * High level of accuracy and attention to detail; well organized. * Demonstrated ability to develop and maintain strong client relationships. * Ability to travel for extended periods of time; sometimes month(s) at a time. * Ability to successfully complete Federal, Client, and/or Company Specific Training. Job Duties: * Provide jobsite coordination. * Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel. * Provide clear, concise, and thorough job briefings with all personnel on each job site. * Enforce all Railroad, State, and Federal Policies. * Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies. * Enforce Contractor training requirements. * Submit daily field reports detailing Contractor and/or Railroad activities. * Provide On-Track Safety in accordance with 49 CFR 214 Federal Regulations for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT Rail Divisions, Railroad Suppliers, Railroad Contractors, and/or Railroad Consultants. Work Environment: This job operates in a field environment. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. * Must be able to hear, speak, read, and write clearly in English. * Must be able to drive long distances and/or travel by other modes as necessary. * Must be able to stand for long periods of time and/or walk on level/uneven ground. * Must be able to see up close, distances, colors and have use of peripheral vision and depth perception. * Must be able to tolerate extreme heat/cold temperatures. * Must be able to tolerate dusty/noisy conditions. * Must be able to lift and/or move up to 50 pounds. Benefits: * Medical, Dental, Vision, Life Insurance * Short Term, Long Term Disability Insurance * Paid Vacation and Holidays * 401(k) Retirement Plan Keywords: Assistant Division Engineer (ADE), Assistant General Manager (AGM), Assistant Roadmaster, Bridge Inspector, Bridge Manager, Bridge Maintainer, Bridge Supervisor, Division Engineer (DE), Employee In Charge (EIC), Flagger, Flagging, Flagman, Flagmen, Flagperson, Foreman, Foremen, General Manager (GM), Maintenance Of Way (MOW), Manager Track Maintenance (MTM), Manager Track Projects (MTP), Rail, Railroad, Railroad Project Manager, Railway, Railway Project Manager, Roadmaster, Roadway Worker, Roadway Worker In Charge (RWIC), Roadway Worker Protection (RWP), Safety, Signal Inspector, Signal Maintainer, Signal Manager, Signal Supervisor, Track Inspector, Track Maintainer, Track Manager, Track Supervisor. Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training.

Job Title: Roadway Worker In Charge (RWIC) Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: Accountability: Accept full responsibility for self and contribution as a team member. Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary. Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making. Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks. Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner. Customer Service Focus: Ability to provide service excellence to internal and/or external clients. Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences. Initiative: Ability to identify what needs to be done and take action before being asked. Innovativeness: Ability to devise new plans for quality excellence. Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery. Organization: Ability to maintain materials and/or records in a clean and ordered manner. Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks. Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity). Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables. Thoroughness: Ability to ensure that one's work is complete and accurate. Job Requirements: Proficient computer skills in basic email, phone, and text message applications. Proficient computer skills in Android OS; on tablet & smart phone. Proficient computer skills in Citrix Applications. Strong oral and written communication skills. Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety. High level of accuracy and attention to detail; well organized. Demonstrated ability to develop and maintain strong client relationships. Ability to travel for extended periods of time; sometimes month(s) at a time. Ability to successfully complete Federal, Client, and/or Company Specific Training. Job Duties: Provide jobsite coordination. Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel. Provide clear, concise, and thorough job briefings with all personnel on each job site. Enforce all Railroad, State, and Federal Policies. Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies. Enforce Contractor training requirements. Submit daily field reports detailing Contractor and/or Railroad activities. Provide On-Track Safety in accordance with 49 CFR 214 Federal Regulations for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT Rail Divisions, Railroad Suppliers, Railroad Contractors, and/or Railroad Consultants. Work Environment: This job operates in a field environment. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to hear, speak, read, and write clearly in English. Must be able to drive long distances and/or travel by other modes as necessary. Must be able to stand for long periods of time and/or walk on level/uneven ground. Must be able to see up close, distances, colors and have use of peripheral vision and depth perception. Must be able to tolerate extreme heat/cold temperatures. Must be able to tolerate dusty/noisy conditions. Must be able to lift and/or move up to 50 pounds. Benefits: Medical, Dental, Vision, Life Insurance Short Term, Long Term Disability Insurance Paid Vacation and Holidays 401(k) Retirement Plan Keywords: Assistant Division Engineer (ADE), Assistant General Manager (AGM), Assistant Roadmaster, Bridge Inspector, Bridge Manager, Bridge Maintainer, Bridge Supervisor, Division Engineer (DE), Employee In Charge (EIC), Flagger, Flagging, Flagman, Flagmen, Flagperson, Foreman, Foremen, General Manager (GM), Maintenance Of Way (MOW), Manager Track Maintenance (MTM), Manager Track Projects (MTP), Rail, Railroad, Railroad Project Manager, Railway, Railway Project Manager, Roadmaster, Roadway Worker, Roadway Worker In Charge (RWIC), Roadway Worker Protection (RWP), Safety, Signal Inspector, Signal Maintainer, Signal Manager, Signal Supervisor, Track Inspector, Track Maintainer, Track Manager, Track Supervisor. Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training.

Apply Meatcutting Worker Department of Defense Defense Commissary Agency Apply Print Share * * * * Save * This job is open to * Requirements * How you will be evaluated * Required documents * How to apply Serves as the Meatcutting Worker in a Defense Commissary Agency (DeCA) location. The primary purpose of this position is to Assist full performance meatcutters by performing the simpler tasks when processing beef, pork, veal, and lamb into retail and ready-to-eat cuts for sale to patrons. This is an open-continuous announcement with an established initial cut-off date 30 days after the open date of the announcement. Please see the "How You Will Be Evaluated" section for more information. Summary Serves as the Meatcutting Worker in a Defense Commissary Agency (DeCA) location. The primary purpose of this position is to Assist full performance meatcutters by performing the simpler tasks when processing beef, pork, veal, and lamb into retail and ready-to-eat cuts for sale to patrons. This is an open-continuous announcement with an established initial cut-off date 30 days after the open date of the announcement. Please see the "How You Will Be Evaluated" section for more information. Overview Help Accepting applications Open & closing dates 10/24/2025 to 03/01/2026 Salary $20.22 to - $30.49 per hour NTE 48-64 hours biweekly Pay scale & grade WG 5 Locations Fort Rucker, AL Many vacancies Barksdale AFB, LA Many vacancies Fort Polk, LA Many vacancies New Orleans, LA Many vacancies Show morefewer locations (4) Columbus AFB, MS Many vacancies Gulfport, MS Many vacancies Keesler AFB, MS Many vacancies Meridian, MS Many vacancies Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Permanent Work schedule Part-time - Schedule varies by location and includes days, nights, weekends, and holidays Service Competitive Promotion potential None Job family (Series) * 7407 Meatcutting Supervisory status No Security clearance Other Drug test No Position sensitivity and risk Non-sensitive (NS)/Low Risk Trust determination process * Suitability/Fitness Financial disclosure No Bargaining unit status Yes Announcement number DECA-26-12807278-OC-DE Control number 848760100 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Career transition (CTAP, ICTAP, RPL) Federal employees whose job, agency or department was eliminated and are eligible for priority over other applicants. Military spouses Military spouses of active duty service members or whose spouse is 100 percent disabled or died on active duty. Clarification from the agency This establishes a list of applicants to fill vacancies as they occur in the 90 days after the announcement closes. Duties Help Position responsibilities include: * Assist journeyman meat cutters by performing the simpler tasks when processing beef, pork, veal, and lamb into retail and ready to eat cuts for sale to patrons. * Tray, wrap, weigh, and price cuts using automatic or manual wrapping machines. * Ensure correct prices by referencing price lists. * Replenish stock in display cases and rotates product to ensure wholesomeness. * Use, clean, maintain, and sharpens a variety of hand tools and power equipment. * Clean and sanitize work area to maintain required standards of cleanliness and sanitation. Read the entire job announcement. Focus on the following sections to understand whether or not you qualify for the position. * Duties and Qualifications * How to Apply (including a preview of the assessment questionnaire, if applicable) * How You Will be Evaluated Your resume must thoroughly describe how your skills and experiences align to the criteria defined in the Qualifications section of this announcement and it must support your responses to the assessment questionnaire. We do not assume you have the necessary experience to successfully perform in this job regardless of your employment history or academic career. Requirements Help Conditions of employment * Be a U.S. citizen or national. Applicants with a Permanent Resident Card are authorized to live and work in the U.S. but are not eligible for employment in positions requiring U.S. citizenship. If selected, proof of citizenship is required. * Meet minimum age requirement. See Additional Information. * Males born after 12-31-1959 must be registered with or exempt from Selective Service. * Appointment is subject to successful verification of identity and employment eligibility through E-Verify. Learn more about E-Verify, including your rights and responsibilities, at ************************** * Appointment is subject to a favorable suitability or fitness outcome, as determined by a completed background investigation. New federal employees will be fingerprinted. * Be able to obtain and maintain clearance eligibility based on the appropriate background investigation. * May be subject to a probationary/trial period. * Direct deposit of pay is required. * Meet the physical requirements identified in the Qualifications section. Qualifications You must meet qualifications and requirements by the closing date. Per the OPM Qualification System for Trades and Labor Occupations, how you gained the skill and/or knowledge or the length of time you have spent in this line of work is not as important as what you can do and that you have the required ability or potential to successfully perform the duties of this position. Your resume should show your specific knowledge, skill, and abilities for this position in relation to each of the elements being measured. Examples of qualifying experience: * Working in the retail meat department traying, wrapping and weighing meat for sale to patrons. * Cutting, trimming and boning meat. * Using hand tools and operating powered meat cutting equipment. You will receive credit for all relevant qualifying experience (paid and unpaid), including volunteer work done through National Service program (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Physical requirements: (1) Continuously walk, stand, bend, stoop, stretch, and reach. (2) Lift up to 50 pounds independently and occasionally over 50 pounds with assistance. You will attest to your ability to perform these physical requirements in the Questionnaire. As part of the online application process, you will respond to a series of questions designed to evaluate what you can do against what the work requires (job element method). This job has one critical element, called the screen-out element (SOE). The SOE addresses the critical knowledge, skill, and abilities essential to satisfactory job performance. Applicants who clearly fail to meet the lowest acceptable requirement in the SOE are rated ineligible and receive no further consideration. The job elements for this job are: * Ability to do the Work of the Position Without More than Normal Supervision * Dexterity and Safety * Work Practices (includes keeping things neat, clean and in order) * Ability to Interpret Instructions, Specifications, etc. (other than blueprints) * Materials * Technical Practice * Use and maintain hand and power tools Overtime: Occasional Bargaining Unit Status: Covered Fair Labor Standards Act (FLSA): Nonexempt Obligated Position: No Those retired under CSRS or FERS considered: No. DoD criteria not met. Work environment: May be subject to temperature changes based on opening and closing doors, working on loading docks, outside, and in refrigerated rooms. May be exposed to hot or cold weather, damp conditions, or drafty conditions. There is a danger of minor cuts, scrapes, bruises or heat sealer burns. Telework eligible: No Remote work eligible: No Education You may not use education to qualify for this position. Additional information Executive Order 12564 requires a federal workplace to be free of illegal drugs and prohibits the use of illegal drugs both on and off duty by federal employees. As a reminder, marijuana is still classified as an illegal drug by the Federal government and is prohibited for use by Federal employees even if such use is legal in the state where the Federal employee resides and/or works. The Defense Commissary Agency is a Drug-Free Federal Workplace where the use of illegal drugs will not be tolerated and may result in penalties up to and including removal from Federal service. * The salary range at the beginning of this announcement reflects Step 1 of the listed location with the lowest salary to the Step 5 of the listed location with the highest salary. * Upon first appointment to a civilian position in the Federal government, you are entitled only to the lowest step (Step 1) of the grade for which selected. The display of a salary range on this announcement does not suggest or convey an entitlement to a higher rate of pay. Refer to the Appropriated Fund Schedules page to find the salary range for a specific location. * The minimum age requirement is generally 18 years. Employing those under 18 may be possible under certain circumstances. If under 18 years of age, ensure you provide documentation showing how you are eligible. * Applicants with financial difficulty are not automatically removed from consideration. * Selectees are required to complete an online onboarding process. * Retired military service members cannot be appointed to a Department of Defense (DoD) civilian position within 180 days of their retirement date. 5 United States Code 3326. * Current active duty armed forces personnel within 120 days of separation must submit written documentation from the armed forces certifying that the service member is expected to be separated from active duty service not later than 120 days after the date the certification is signed. The document must include the following information: (1) service member's name, (2) date of the expected separation from active duty, (3) expected character of the active duty service at separation, (4) pay grade/rank/rate at separation, (5) dates of active duty service, and (6) any campaign or expeditionary medals received. You must submit the DD-214 when it becomes available. The following may result in a rating of ineligible. Ineligible applicants receive no consideration. * Submitting an incomplete application package may result in your not being considered for this position. Your resume must reflect that you are either Part-Time with the number of hours listed, Full Time, or 40 hours per week as your work schedule. If you fail to provide this information in your resume, your resume may be considered as incomplete. * Submitting encrypted documents or uploading Adobe portfolio documents. * Submitting any document that contains a photo or image of you. * Including social media links, inappropriate material or content, classified or government sensitive information, or personal information such as age, gender, race, religion, or social security number on your resume. * Overstating your qualifications and/or experience in your application materials or questionnaire responses. * Deliberately attempting to falsify your application information, such as copying portions of this announcement into your resume. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. How you will be evaluated You will be evaluated for this job based on how well you meet the qualifications above. Open-Continuous Cut-off Information: An initial cut-off date of 30 days after the open date of the announcement will be used to evaluate candidates for the initial available vacancies. Any application received after the initial cut-off date will only be considered should additional vacancies be received after the initial cut-off date. If additional vacancies are received after the initial cut-off date, ALL applicants that have applied will be evaluated/re-evaluated and ranked as stated within the Evaluation statement in the announcement. HR reviews your documents to determine if you are qualified and meet requirements. Your questionnaire score is a preliminary measure of how well your background matches the required competencies. Under category rating procedures you are placed into one of three categories based on the evaluation results: Best Qualified -Candidates who possess the type and quality of experience that substantially exceeds the position's minimum qualifications, including all selective placement factors and appropriate quality ranking factors. Highly Qualified - Candidates who possess the type and quality of experience that exceeds the position's minimum qualifications. Qualified- Candidates who meet the minimum qualifications and are proficient in some but not all of the position's requirements. Candidates in the best qualified category are referred to hiring managers before candidates in other categories. Within the best qualified category, candidates are referred in the following order: adjudicated veterans' preference candidates with 10-point preference, adjudicated veterans' preference candidates with other than 10-point preference, military spouse preference candidates, and candidates with no preference. Selections are subject to restrictions of the DoD referral system for displaced employees. Neither preference nor priority entitles you to a Federal job. You must apply, meet the qualification standards and all additional requirements, and submit all necessary documents. Military spouses must be in the best qualified group in order to receive military spouse preference Veterans Preference: * You must provide a copy of your DD-214 Certificate of Release or Discharge from Active Duty or other acceptable documentation that includes your character of service. The member 4 copy is preferred. Contact the National Archives or your military personnel records center to request a copy of your DD-214. * Those claiming 10-point preference must submit a completed SF 15 Application for 10-Point Veteran Preference (For Veterans and Relatives of Veterans) and all required proof listed on the reverse of the SF 15. Note that a letter from the VA that contains the following may be sufficient instead of a SF-15: Dates of service, Discharge status, and Disability rating. Contact the Department of Veterans Affairs or call ************** to obtain a copy of the VA letter establishing proof of disability. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. Required documents Required Documents Help Resume: IMPORTANT UPDATE: Your resume must not exceed two (2) pages. If your resume exceeds the two-page limit, you will be removed from consideration for this announcement. The resume and required supporting documentation should provide the minimum qualifications and relevant experience for the announced position. Additional guidance on writing a federal resume can be found at: USAJOBS Help Center - How do I write a resume for a federal job? Page margins should be 0.5 inches, font styles must be legible, and consider using 14-point size font for titles and 10-point for the main text. The resume must not be more than 5MB and should be saved and uploaded as a PDF to maintain formatting and number of pages. At a minimum, your resume MUST contain: * Your name, address, phone, email address. * Job Title. Series and grade (Federal Positions only). * For each position held including employment beginning and ending dates (Month/Year). * Your resume should reflect a description of duties performed and that you are either Part-Time with the number of hours per week listed, Full Time or 40 hours per week as your work schedule. Questionnaire. Preview at ********************************************************* SF 50 Notification of Personnel Action. Required for current and former federal employees. Submit a copy of your most recent SF 50 showing your current position title, pay plan-series-grade, tenure and position occupied. ICTAP eligibility: Submit (1) a copy of your agency specific ICTAP eligibility notice or a copy of your separation personnel action form and (2) a copy of your most recent performance appraisal and (3) a copy of your most recent SF 50 or agency notification of personnel action showing your current position, grade level, and duty location. Separation personnel actions do not include a certificate/notice of expected separation. Priority Placement Program (PPP) DoD Retained Grade Preference (RGP) eligibility: 1. Submit a signed Retained Grade PPP Self-Certification Checklist DD3145-1 (whs.mil. 2. a copy of your Notification of Personnel Action (SF-50) effecting the placement in retained grade status; or a copy of the notification letter you received regarding the RIF or classification downgrade. Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible (PPP DoD MRNG): In order to receive this preference, you must choose the Military Reserve and National Guard Technician eligibility, and fill out and submit the Military Reserve and National Guard Technician PPP Self-Certification Checklist and copies of the appropriate documentation. Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Preference Eligible Tech Receiving Disability Retirement (PPP DoD MR & NG):In order to receive this preference, you must choose the Military Reserve (MR) and National Guard (NG) Preference Eligible Tech Receiving Disability Retirement eligibility and submit a completed Military Reserve and National Guard Technician Disability PPP Self-Certification Checklist and copies of the appropriate documentation, such as the notification letter you received that states you are no longer eligible for Reserve membership due to a service-connected disability. Military Spouse Preference: Submit (1) the Self-Certification Checklist and (2) proof of marriage to the military service member (e.g., marriage certificate, marriage license), and (3) a copy of the military service member's PCS orders. Non-Competitive Military Spouse Preference: Submit (1) Marriage certificate and (2) a copy of your spouse's active Military Orders and (3) DD-214 - Certificate of Release or Discharge from Active Duty (if Applicable) and (4) DD1300 - Report of Casualty (If applicable). How to Apply Help To receive consideration for the initial cut-off date of 30 days after the open date of announcement, the complete application package must be submitted by 11:59 PM (EST) of that established date. All applications received thereafter will be considered should additional vacancies be received after the initial cut-off date in which additional cut-off dates will be established. Your complete application package must be received by 11:59 PM ET on 03/01/2026. You are responsible for verifying your application package is complete, accurate, and submitted timely. As uploaded documents may take one or more hours to clear the virus scan, plan accordingly to ensure your application process is complete and your application package is submitted by the specified closing date and time. To begin, click Apply to access an online application. Follow the prompts to select your resume, required documents, and/or other supporting documents. You need to be logged into your USAJOBS account to apply or create an account before applying. You will be taken to an online application. Follow all prompts and complete the online application, verify you've included all required and supporting documentation, and submit your application. Additional information on how to complete the online application process and submit your online application is found at the USA Staffing Applicant Resource Center. To receive consideration, you must complete all steps of the application process. You can verify your application status by logging into your USAJOBS account, selecting the Application Status link, and then selecting the More Information link for this position. The Application Status page displays your application status, the documents received and processed, and your questionnaire responses. Agency contact information DeCA DE East Servicing Team Phone ************ Fax ************ Email *************************** Address Defense Commissary Agency East 1300 E Avenue Fort Lee, VA 22380 US Next steps Notices post to your USAJOBS account and are emailed to you. You can expect to receive a notice when you complete the application process, when your qualifications status is determined (qualified or not qualified), and when your referral status is determined (referred or not). If you are referred but not selected, you can expect to receive a final notice approximately 180 days after the announcement closes. If a vacancy for the location(s) you selected does not occur within 90 days after this announcement closes, you may not receive a qualifications status or referral status notice. The hiring manager may choose to conduct interviews and may conduct telephone interviews to preclude travel hardships for applicants. Someone from the hiring agency (i.e., DeCA) will contact you if the hiring manager decides to interview you. Should you receive a tentative job offer, be aware such offers are automatically withdrawn if you fail to (1) record an acceptance or declination by the response date provided in the offer notice and/or (2) meet any pre-employment requirements, including a scheduled appointment. If you receive a job offer, use a computer to submit your response rather than a mobile/cell phone. Fair and transparent The Federal hiring process is set up to be fair and transparent. Please read the following guidance. Criminal history inquiries Equal Employment Opportunity (EEO) Policy Financial suitability New employee probationary period Privacy Act Reasonable accommodation policy Selective Service Signature and false statements Social security number request Required Documents Help Resume: IMPORTANT UPDATE: Your resume must not exceed two (2) pages. If your resume exceeds the two-page limit, you will be removed from consideration for this announcement. The resume and required supporting documentation should provide the minimum qualifications and relevant experience for the announced position. Additional guidance on writing a federal resume can be found at: USAJOBS Help Center - How do I write a resume for a federal job? Page margins should be 0.5 inches, font styles must be legible, and consider using 14-point size font for titles and 10-point for the main text. The resume must not be more than 5MB and should be saved and uploaded as a PDF to maintain formatting and number of pages. At a minimum, your resume MUST contain: * Your name, address, phone, email address. * Job Title. Series and grade (Federal Positions only). * For each position held including employment beginning and ending dates (Month/Year). * Your resume should reflect a description of duties performed and that you are either Part-Time with the number of hours per week listed, Full Time or 40 hours per week as your work schedule. Questionnaire. Preview at ********************************************************* SF 50 Notification of Personnel Action. Required for current and former federal employees. Submit a copy of your most recent SF 50 showing your current position title, pay plan-series-grade, tenure and position occupied. ICTAP eligibility: Submit (1) a copy of your agency specific ICTAP eligibility notice or a copy of your separation personnel action form and (2) a copy of your most recent performance appraisal and (3) a copy of your most recent SF 50 or agency notification of personnel action showing your current position, grade level, and duty location. Separation personnel actions do not include a certificate/notice of expected separation. Priority Placement Program (PPP) DoD Retained Grade Preference (RGP) eligibility: 1. Submit a signed Retained Grade PPP Self-Certification Checklist DD3145-1 (whs.mil. 2. a copy of your Notification of Personnel Action (SF-50) effecting the placement in retained grade status; or a copy of the notification letter you received regarding the RIF or classification downgrade. Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible (PPP DoD MRNG): In order to receive this preference, you must choose the Military Reserve and National Guard Technician eligibility, and fill out and submit the Military Reserve and National Guard Technician PPP Self-Certification Checklist and copies of the appropriate documentation. Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Preference Eligible Tech Receiving Disability Retirement (PPP DoD MR & NG):In order to receive this preference, you must choose the Military Reserve (MR) and National Guard (NG) Preference Eligible Tech Receiving Disability Retirement eligibility and submit a completed Military Reserve and National Guard Technician Disability PPP Self-Certification Checklist and copies of the appropriate documentation, such as the notification letter you received that states you are no longer eligible for Reserve membership due to a service-connected disability. Military Spouse Preference: Submit (1) the Self-Certification Checklist and (2) proof of marriage to the military service member (e.g., marriage certificate, marriage license), and (3) a copy of the military service member's PCS orders. Non-Competitive Military Spouse Preference: Submit (1) Marriage certificate and (2) a copy of your spouse's active Military Orders and (3) DD-214 - Certificate of Release or Discharge from Active Duty (if Applicable) and (4) DD1300 - Report of Casualty (If applicable).

Job Description Title: Working Leaderman (Structural) Job Overview: A Working Leaderman (Structural) is responsible for directing his/her workforce in the successful implementation of craft-specific activities as it relates to associated shipbuilding and/or repair functions. Key Responsibilities: Utilizes knowledge of the working characteristics of metallic and non-metallic materials, including the specifications of the equipment to be used in the welding process. Performs tank testing and associated duties as required. Experience: At least Five (5) years of assembly/prefab structural welding/fitting experience. Prior supervision experience is preferred. Skills and Abilities: Basic knowledge of welding/fitting specific processes and techniques in addition to being familiar with standard marine practices and general specifications for construction. Experience in structural fabrication and the ability to read/understand drawings is required. Previous supervisory experience is a plus. Must be able to communicate effectively with employees, work well with others, and have the ability to plan/schedule craft-specific work tasks. Must have a strong focus on quality, production, safety, and environmental aspects of work being performed. Bollinger is an equal opportunity employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, and without regard to sexual orientation and gender identity. Powered by ExactHire:186331

Job Title: Roadway Worker In Charge (RWIC) Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: * Accountability: Accept full responsibility for self and contribution as a team member. * Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary. * Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making. * Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks. * Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner. * Customer Service Focus: Ability to provide service excellence to internal and/or external clients. * Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences. * Initiative: Ability to identify what needs to be done and take action before being asked. * Innovativeness: Ability to devise new plans for quality excellence. * Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery. * Organization: Ability to maintain materials and/or records in a clean and ordered manner. * Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks. * Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity). * Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables. * Thoroughness: Ability to ensure that one's work is complete and accurate. Job Requirements: * Proficient computer skills in basic email, phone, and text message applications. * Proficient computer skills in Android OS; on tablet & smart phone. * Proficient computer skills in Citrix Applications. * Strong oral and written communication skills. * Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety. * High level of accuracy and attention to detail; well organized. * Demonstrated ability to develop and maintain strong client relationships. * Ability to travel for extended periods of time; sometimes month(s) at a time. * Ability to successfully complete Federal, Client, and/or Company Specific Training. Job Duties: * Provide jobsite coordination. * Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel. * Provide clear, concise, and thorough job briefings with all personnel on each job site. * Enforce all Railroad, State, and Federal Policies. * Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies. * Enforce Contractor training requirements. * Submit daily field reports detailing Contractor and/or Railroad activities. * Provide On-Track Safety in accordance with 49 CFR 214 Federal Regulations for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT Rail Divisions, Railroad Suppliers, Railroad Contractors, and/or Railroad Consultants. Work Environment: This job operates in a field environment. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. * Must be able to hear, speak, read, and write clearly in English. * Must be able to drive long distances and/or travel by other modes as necessary. * Must be able to stand for long periods of time and/or walk on level/uneven ground. * Must be able to see up close, distances, colors and have use of peripheral vision and depth perception. * Must be able to tolerate extreme heat/cold temperatures. * Must be able to tolerate dusty/noisy conditions. * Must be able to lift and/or move up to 50 pounds. Benefits: * Medical, Dental, Vision, Life Insurance * Short Term, Long Term Disability Insurance * Paid Vacation and Holidays * 401(k) Retirement Plan Keywords: Assistant Division Engineer (ADE), Assistant General Manager (AGM), Assistant Roadmaster, Bridge Inspector, Bridge Manager, Bridge Maintainer, Bridge Supervisor, Division Engineer (DE), Employee In Charge (EIC), Flagger, Flagging, Flagman, Flagmen, Flagperson, Foreman, Foremen, General Manager (GM), Maintenance Of Way (MOW), Manager Track Maintenance (MTM), Manager Track Projects (MTP), Rail, Railroad, Railroad Project Manager, Railway, Railway Project Manager, Roadmaster, Roadway Worker, Roadway Worker In Charge (RWIC), Roadway Worker Protection (RWP), Safety, Signal Inspector, Signal Maintainer, Signal Manager, Signal Supervisor, Track Inspector, Track Maintainer, Track Manager, Track Supervisor. Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training.

Individual is responsible for duties of a semi-skilled level under general supervision. General duties include: electrical work such as, wiring, replacing fuses and bulbs, and conduit work; use of power and hand tools, and operation and maintenance of machinery, including jack hammers, power saws and tapping machines. Also assisting in installation and repair of water and wastewater lines, sealing pipes, and installing fire hydrants; dig out, grade and fill ditches and potholes. Must have knowledge of tools and equipment necessary to perform the job, as well as, the ability to carry out and understand oral and written instructions. Must have valid Louisiana Driver's License.

Job Title: Roadway Worker In Charge (RWIC) Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: Accountability: Accept full responsibility for self and contribution as a team member. Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary. Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making. Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks. Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner. Customer Service Focus: Ability to provide service excellence to internal and/or external clients. Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences. Initiative: Ability to identify what needs to be done and take action before being asked. Innovativeness: Ability to devise new plans for quality excellence. Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery. Organization: Ability to maintain materials and/or records in a clean and ordered manner. Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks. Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity). Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables. Thoroughness: Ability to ensure that one's work is complete and accurate. Job Requirements: Proficient computer skills in basic email, phone, and text message applications. Proficient computer skills in Android OS; on tablet & smart phone. Proficient computer skills in Citrix Applications. Strong oral and written communication skills. Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety. High level of accuracy and attention to detail; well organized. Demonstrated ability to develop and maintain strong client relationships. Ability to travel for extended periods of time; sometimes month(s) at a time. Ability to successfully complete Federal, Client, and/or Company Specific Training. Job Duties: Provide jobsite coordination. Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel. Provide clear, concise, and thorough job briefings with all personnel on each job site. Enforce all Railroad, State, and Federal Policies. Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies. Enforce Contractor training requirements. Submit daily field reports detailing Contractor and/or Railroad activities. Provide On-Track Safety in accordance with 49 CFR 214 Federal Regulations for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT Rail Divisions, Railroad Suppliers, Railroad Contractors, and/or Railroad Consultants. Work Environment: This job operates in a field environment. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to hear, speak, read, and write clearly in English. Must be able to drive long distances and/or travel by other modes as necessary. Must be able to stand for long periods of time and/or walk on level/uneven ground. Must be able to see up close, distances, colors and have use of peripheral vision and depth perception. Must be able to tolerate extreme heat/cold temperatures. Must be able to tolerate dusty/noisy conditions. Must be able to lift and/or move up to 50 pounds. Benefits: Medical, Dental, Vision, Life Insurance Short Term, Long Term Disability Insurance Paid Vacation and Holidays 401(k) Retirement Plan Keywords: Assistant Division Engineer (ADE), Assistant General Manager (AGM), Assistant Roadmaster, Bridge Inspector, Bridge Manager, Bridge Maintainer, Bridge Supervisor, Division Engineer (DE), Employee In Charge (EIC), Flagger, Flagging, Flagman, Flagmen, Flagperson, Foreman, Foremen, General Manager (GM), Maintenance Of Way (MOW), Manager Track Maintenance (MTM), Manager Track Projects (MTP), Rail, Railroad, Railroad Project Manager, Railway, Railway Project Manager, Roadmaster, Roadway Worker, Roadway Worker In Charge (RWIC), Roadway Worker Protection (RWP), Safety, Signal Inspector, Signal Maintainer, Signal Manager, Signal Supervisor, Track Inspector, Track Maintainer, Track Manager, Track Supervisor. Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training.

Job Description Title: Working Leaderman (Structural) Job Overview: A Working Leaderman (Structural) is responsible for directing his/her workforce in the successful implementation of craft-specific activities as it relates to associated shipbuilding and/or repair functions. Key Responsibilities: Utilizes knowledge of the working characteristics of metallic and non-metallic materials, including the specifications of the equipment to be used in the welding process. Performs tank testing and associated duties as required. Experience: At least Five (5) years of assembly/prefab structural welding/fitting experience. Prior supervision experience is preferred. Skills and Abilities: Basic knowledge of welding/fitting specific processes and techniques in addition to being familiar with standard marine practices and general specifications for construction. Experience in structural fabrication and the ability to read/understand drawings is required. Previous supervisory experience is a plus. Must be able to communicate effectively with employees, work well with others, and have the ability to plan/schedule craft-specific work tasks. Must have a strong focus on quality, production, safety, and environmental aspects of work being performed. Bollinger is an equal opportunity employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, and without regard to sexual orientation and gender identity. Powered by ExactHire:186333