Sims Crane jobs - 199 jobs

Job Summary: The Crane Operator is responsible for operating various types of cranes to lift, move, and position materials efficiently and precisely. Essential Functions: Operate cranes (e.g., mobile or overhead cranes) to lift, transport, and place materials safely and accurately. Inspect andmaintainequipment, performing routine checks to ensure safety and operational efficiency. Collaborate with team members, including riggers and signal personnel, to ensure smooth workflow and proper communication. Follow all company policies and local regulations to ensure the safety of the worksite and compliance with industry standards. Interpret load charts and assess load weights todeterminesafe operational limits. Respond to and address any operational issues or challenges promptly. Comply with all federal, state, and local laws and regulations. Required Skills/Abilities: Proven experience as a Crane Operator with relevant certifications or licenses (e.g., NCCCO certification). Proficient knowledge of crane operation, safety regulations, and maintenance procedures. Strong hand-eye coordination, precision, and attention to detail. Ability to work outdoors in varying weather conditions and perform physically demanding tasks. Excellent communication and teamwork skills. Commitment to maintaining safe and efficient work environment. Minimum Requirements: Active NCCCO crane certification. 3+ years' experience operating heavy machinery, preferably cranes. Valid Driver's License, Class A preferred. Must be legally authorized to work in the United States. Must be able to read, write, speak, and understand English. Physical Requirements: Sims Crane & Equipment maintains a firm commitment to providing a safe and healthy work environment for its employees and quality services to its clients. Sims Crane & Equipment is a drug-free workplace. Must be able to pass a post-offer / pre-placement drug screen. Must also submit to a post-offer / pre-employment background report & motor vehicle check. Work is performed in a standard construction environment with prolonged periods of standing, sitting and/or walking. Subject to standing, walking, bending, reaching, stooping, and lifting objects up to 100 pounds at times. May occasionally be exposed to dangerous machinery, extreme noise and physical harm in areas requiring hard hats, safety glasses and steel-toed safety shoes. Ability to pass DOT pre-placement physical and physical capacities exam. Disclaimer: An employee must be able to perform the essential functions of the job, with or without reasonable accommodations. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Sims Crane & Equipment is proud to be an Equal Opportunity Employer/Drug and Alcohol-Free Workplace. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status, such as race, religion, color, national origin, sex, sexual orientation, gender identity and age.

Summary: Perform various construction surveying related task utilizing Trimble GPS, survey, and CAD software in order to produce clear, complete, and concise results in a timely manner. Essential Duties and Responsibilities: * Train, educate and assist field personnel in the use and operation of Machine Control GPS equipment * Site localization and set-up, pre-surveys, production surveys and as-builts as necessary * Verify Machine Control calibrations, maintain and troubleshoot GPS problems when necessary * Perform site staking/layout and grade checking as necessary * Produce quantity reports for project managers and superintendents * Practice good recordkeeping skills for survey logs and records Requirements: * Strong mathematical skills. * Excellent Communication skills both oral and written when working alongside all levels of management, co-workers, vendors and clients * Experience with Trimble data collection software & surveying equipment * Proficient with MS office software * Experience with drafting software (AutoCAD, Carlson) preferred * Ability to read, analyze and interpret civil plans and specifications * Must be a motivated self-starter, team player with the desire to learn and advance * Must be able to work in outdoor environments, including prolonged walking and standing on uneven terrain and variable weather conditions * Must be willing to travel. Moderate to extensive overnight travel * Must possess clean driving record to drive company vehicle Education and Experience: * AAS/Technical Certificate in Geodetic/Surveying or 1-3 years related field experience Candidates that accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam is essential to ensure that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Email:

Ames Construction has built America for more than 60 years, and the exceptional people who make up our team are a vital factor in our success. We are a full-service, heavy civil and industrial general contractor that brings innovative solutions to many market segments, from highway and bridge construction to mining and rail. Ames is an employee-owned company that retains its entrepreneurial spirit while offering the experience and stability of a proven construction industry leader. Equipped with our core values of People, Team, Our Bond, Persistence, and Vision, we make communities across the U.S. safer, keep supply chains moving, and lay the groundwork for a sustainable future. By joining Ames, you will be working with talented colleagues at an award-winning, nationally recognized top 65 general contractor. We are seeking a reliable and safety-conscious Heavy Equipment Oiler and Fueler to support our field operations. This role is essential to keeping our fleet of heavy machinery running efficiently and safely. The ideal candidate will have experience working around construction equipment and a strong understanding of fueling, lubricating, and basic maintenance procedures. Key Responsibilities * Fuel and lubricate heavy equipment including excavators, dozers, loaders, and haul trucks. * Perform routine inspections and preventative maintenance tasks. * Maintain accurate records of fuel and fluid usage. * Monitor equipment for signs of wear or malfunction and report issues promptly. * Operate service trucks and maintain cleanliness and organization of fueling equipment. * Comply with all safety regulations and company policies. * Assist mechanics and operators as needed. Qualifications * High school diploma or equivalent. * Valid driver's license (CDL preferred). * Experience in heavy equipment fueling and lubrication (preferred). * Ability to work outdoors in varying weather conditions. * Strong attention to detail and commitment to safety. * Ability to lift heavy objects and perform physical labor. Working Conditions * Construction Site Environment - physical ability to stand, walk, crawl, bend, reach and climb. Lifting and carrying material and objects. Exposed to high noise levels. * Schedule: 10hour shifts, swing shifts (day or night). Ames Construction is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. This position requires ensuring compliance with CMMC, FAR, and Accounting Standards in all Federal efforts.

The Project Controls Manager (PCM) plays a crucial leadership role in guiding the project towards achieving its objectives. This position involves managing the commercial aspects of projects, encompassing cost, revenue, planning, scheduling, risk management, change management, estimating, and contract compliance. The PCM ensures that project services align with company standards, focusing on maximizing profitability and adhering to best practices. Additionally, this role includes significant responsibilities in client management and coordination of project services across various locations. Essential Duties and Responsibilities: * Provide comprehensive data analysis and strategic information to support project management. * Identify trends, perform summary analysis, and evaluate risks associated with the project. * Define, plan, and manage project services disciplines to ensure quality compliance and best practices. * Coordinate and manage project procedures and documentation effectively. * Assist the Project Manager in identifying, evaluating, and monitoring project risks and opportunities, including the development and implementation of risk mitigation strategies. Supervisory Responsibilities: * Lead and mentor within the project controls discipline, promoting growth and learning through effective mentoring and coaching. Requirements: * Proven experience in project control disciplines within a relevant industry. Education and Experience: * Minimum 5 years of experience in project management or controls and a college degree in a related field. Candidates that accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam is essential to ensure that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process. Equal Opportunity Employer, including disabled and veterans.

Ames Construction has built America for more than 60 years, and the exceptional people who make up our team are a vital factor in our success. We are a full-service, heavy civil and industrial general contractor that brings innovative solutions to many market segments, from highway and bridge construction to mining and rail. Ames is an employee-owned company that retains its entrepreneurial spirit while offering the experience and stability of a proven construction industry leader. Equipped with our core values of People, Team, Our Bond, Persistence, and Vision, we make communities across the U.S. safer, keep supply chains moving, and lay the groundwork for a sustainable future. By joining Ames, you will be working with talented colleagues at an award-winning, nationally recognized top 65 general contractor. Are you ready to get your hands dirty and keep the big machines moving? As a Heavy Field Equipment Mechanic, you'll be the driving force behind the reliability and performance of essential machinery that keeps our projects running. You'll diagnose, repair, and maintain diesel engines and heavy equipment with precision and pride, ensuring safety, efficiency, and uptime. This role is perfect for someone who thrives in a fast-paced, hands-on environment, loves solving mechanical puzzles, and takes pride in keeping powerful machines in peak condition. Every day brings new challenges, and your expertise will make a real impact on operations and productivity. Job Requirements * Minimum Class B CDL with Tanker and Hazmat endorsement. * Experience with CAT machines including but not limited to: * Articulation Trucks * Larger Excavators * Dozers * Skid Steers * Wheel Loaders * On Road Trucks * Proficient in performing preventive maintenance (PM) on various equipment, including **************, and 2000-hour service intervals. * Fueling equipment in between shifts and maintaining fuel logs. * Must be able to work swing shifts and have flexibility for both day and night shifts. * Strong mechanical aptitude and ability to troubleshoot and maintain equipment. * Grease all Equipment Key Responsibilities * Perform regular PM services on heavy equipment. * Maintain and fuel machines as required, ensuring all equipment is in optimal working condition. * Conduct oil changes, fluid checks, and other routine maintenance tasks. * Troubleshoot minor mechanical issues and report more complex issues to the maintenance team. * Assist in ensuring that safety protocols are followed at all times. * Work closely with the maintenance and operations teams to ensure minimal downtime and efficient operations. Qualifications * Must have a valid Class B CDL with Tanker and Hazmat endorsements. * Previous experience with CAT heavy equipment, including Haul Trucks, Loaders, Excavators, Dozers, and Skid Steers. * Ability to perform preventive maintenance tasks on heavy-duty equipment. * Ability to work independently and as part of a team. * Must be flexible with shifts and work extended hours as needed. Working Conditions * Construction Site Environment - physical ability to stand, walk, crawl, bend, reach and climb. Lifting and carrying material and objects. Exposed to high noise levels. * Schedule: 10hour shifts, swing shifts (day or night). Ames Construction is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. This position requires ensuring compliance with CMMC, FAR, and Accounting Standards in all Federal efforts.

As a Dozer GPS/Finish Dozer Operator, you will play a vital role in our construction and grading projects. Your primary responsibility will be to operate and maintain dozers equipped with GPS technology or finish dozers to ensure accurate grading and leveling of construction sites. Key Responsibilities: * Equipment Operation: Operate dozers equipped with GPS technology or finish dozers with precision, following project plans and specifications for grading and leveling. * Safety: Strictly adhere to all safety procedures and guidelines to maintain a safe working environment for yourself and your team. * Maintenance: Perform routine equipment maintenance, including inspections, lubrication, and promptly reporting any equipment issues to the maintenance department. * Accuracy: Ensure precise grading and leveling according to project requirements, blueprints, and design specifications. * Teamwork: Collaborate effectively with project managers, supervisors, and fellow team members to coordinate grading activities and achieve project goals. * Communication: Maintain clear and effective communication with team members and supervisors, reporting progress, challenges, and equipment issues as needed. * Regulatory Compliance: Stay informed about and comply with all relevant regulations, safety guidelines, and industry best practices. * Problem Solving: Identify and address operational challenges or issues that may arise during grading work. * Documentation: Maintain accurate records, including daily equipment inspection reports and work logs. Qualifications: * Proven experience as a Dozer GPS/Finish Dozer Operator in the heavy civil construction industry. * Proficiency in operating and maintaining dozers equipped with GPS technology or finish dozers. * Knowledge of construction plans, blueprints, and grading techniques. * Strong commitment to safety and strict adherence to safety protocols. * Excellent teamwork and communication skills. * Willingness to work in varying weather conditions and at different job sites as required. * Valid [State] driver's license and a clean driving record. Candidates that accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam is essential to ensure that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Email:

The Senior Estimator is responsible for leading the estimation process for complex construction projects, overseeing the development of accurate and timely cost estimates. This role requires extensive experience in construction estimating, deep knowledge of construction processes, and the ability to lead a team of estimators. Essential Duties and Responsibilities * Lead the preparation of detailed cost estimates for complex heavy civil construction projects. * Analyze project plans, specifications, and site conditions to accurately determine scope and cost. * Develop and maintain professional relationships. * Participate in strategic planning with project management and executive teams. * Review and finalize bid submissions, ensuring accuracy and completeness. * Mentor and develop the estimating team, promoting professional growth and expertise. Requirements * Comprehensive knowledge of construction processes, materials, and market trends. * Strong leadership, analytical, and organizational skills. * Advanced proficiency in InEight estimating software. * Excellent communication, negotiation, and interpersonal skills. * Proven ability to manage multiple projects and deadlines effectively. * Attend site visits and pre-bid meetings. Education and Experience * Bachelor's degree in Construction Management, Engineering, or a related field. * Minimum of 5 years of experience in construction estimating, with at least 3 years in a senior or lead estimator role. Candidates that accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam is essential to ensure that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process. Equal Opportunity Employer, including disabled and veterans.

Ames Construction has built America for more than 60 years, and the exceptional people who make up our team are a vital factor in our success. We are a full-service, heavy civil and industrial general contractor that brings innovative solutions to many market segments, from highway and bridge construction to mining and rail. Ames is an employee-owned company that retains its entrepreneurial spirit while offering the experience and stability of a proven construction industry leader. Equipped with our core values of People, Team, Our Bond, Persistence, and Vision, we make communities across the U.S. safer, keep supply chains moving, and lay the groundwork for a sustainable future. By joining Ames, you will be working with talented colleagues at an award-winning, nationally recognized top 65 general contractor. Position Overview The Project Safety Manager will be responsible for implementing and overseeing safety programs on heavy civil construction projects. This role ensures compliance with all federal, state, and local regulations, as well as company safety standards. The ideal candidate is proactive, detail-oriented, and passionate about creating a safe work environment for all team members. Key Responsibilities * Develop, implement, and maintain project-specific safety plans. * Conduct regular site inspections and audits to ensure compliance with safety regulations. * Lead safety meetings, toolbox talks, and training sessions for project personnel. * Investigate incidents, near misses, and accidents; prepare detailed reports and corrective action plans. * Collaborate with project managers and superintendents to integrate safety into all phases of construction. * Maintain accurate safety documentation and records. * Serve as the primary point of contact for all safety-related matters on the project site. Qualifications * Bachelor's degree in Safety Management, Construction Management, or related field (preferred). * Minimum 5 years of safety experience in heavy civil construction. * Knowledge of OSHA regulations and other applicable safety standards. * Strong communication and leadership skills. * Ability to work in a fast-paced, outdoor environment. * Certifications such as CSP, CHST, or OSHA 30 are highly desirable. Working Conditions * Construction Site Environment - physical ability to stand, walk, crawl, bend, reach and climb. Exposed to high noise levels * Office Environment - extensive sitting at desk and computer; some standing, bending at the waist, stooping and reaching required; ability to lift 5-20 pounds occasionally Ames Construction is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. This position requires ensuring compliance with CMMC, FAR, and Accounting Standards in all Federal efforts.

Job Summary: The Billing Specialist is responsible for maintaining accurate records regarding customers' accounts. Essential Functions: Ensure billing is accurate details such as trip duration, distance, job duration. Submit invoices to customer portals or through other methods as required by customers. Ensure invoices are submitted in the correct format and within the required time frame according to customer specifications. Monitor submission confirmations and track invoice status to ensure timely processing and payment. Maintain and update customer account information, ensuring all records are up-to-date and accurate. Respond to customer inquiries regarding invoices, payments, and account details. Creates and reviews Taxi billing. Taxi Billing - These jobs are one day jobs normally includes a crane and a rigger Required Skills/Abilities: Excellent verbal and written communication skills. Excellent customer service skills. Strong organizational skills. Proficiency with Microsoft Office and Adobe. Ability to work independently and as a part of a team. Minimum Requirements: 0-2 years of experience in billing, accounting, or administrative work. High School Diploma or equivalent (associate or bachelor's degree in accounting, finance, or business is a plus. Basic knowledge of accounting principles preferred. Valid Driver's License. Must be legally authorized to work in the United States. Must be able to read, write, speak, and understand English. Physical Requirements: Sims Crane & Equipment maintains a firm commitment to providing a safe and healthy work environment for its employees and quality services to its clients. Sims Crane & Equipment is a drug-free workplace. Must be able to pass a post-offer / pre-placement drug screen. Must also submit to a post-offer / pre-employment background report & motor vehicle check. Work is performed in a standard office environment with prolonged periods of sitting at a desk and working on a computer. Subject to standing, walking, bending, reaching, stooping, and lifting objects up to 25 pounds at times. Disclaimer: An employee must be able to perform the essential functions of the job, with or without reasonable accommodation. Other Duties Please note this job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Sims Crane & Equipment is proud to be an Equal Opportunity Employer/Drug and Alcohol-Free Workplace. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status, such as race, religion, color, national origin, sex, sexual orientation, gender identity and age.

* Job Located In Ochopee, FL * This position is responsible for tasks involving physical labor at construction sites and assisting other workers. Employees may operate hand and power tools of all types: air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment and instruments. They may also clean and prepare sites, dig trenches, set braces to support the sides of excavations, erect scaffolding, and clean up rubble other waste materials. Essential Duties and Responsibilities: * Clean or prepare construction sites to eliminate possible hazards * Load, unload, or identify building materials, machinery, or tools while distributing them to the appropriate locations * Control traffic passing near, in, or around work zones with appropriate training provided * Signal equipment operators to facilitate alignment, movement, or adjustment of machinery, equipment, or materials with appropriate training provided * Dig ditches or trenches, backfill excavations, or compact and level earth using picks, shovels, pneumatic tampers, or rakes * May be required to enter trenches and/or confined spaces after receiving proper training * Understand and comply with safety considerations as set herein and as directed by the Foreman/Supervisor Candidates that accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam is essential to ensure that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Email:

The Survey Manager is responsible for the safe, accurate, and efficient management of the survey department for a leading civil construction contractor. This role ensures that all survey operations-both field and office-are completed with precision, consistency, and full compliance with project specifications and safety standards. * ---- Key Responsibilities * Supervise field survey crews and CAD technicians, ensuring timely and accurate deliverables. * Provide survey crews with all necessary layout data and coordinate project setup. * Prepare and maintain GPS machine control files for construction operations. * Review, prepare, and sign as-built drawings and documentation as required. * Train and support project teams in GPS technology and data collection methods. * Perform survey calculations, data analysis, and field verification. * Conduct as-built data collection and field layout for sitework and utilities using GPS and robotic total stations. * Maintain detailed notes, logs, and reports for all survey activities. * Troubleshoot GPS and machine control issues to keep operations running smoothly. Qualifications * Minimum of 5 years of professional survey experience in civil construction. * Florida-licensed Professional Engineer (P.E.) or Professional Surveyor and Mapper (P.S.M.) authorized to seal as-built drawings. * Strong attention to detail with the ability to work independently and meet deadlines. * Excellent problem-solving and leadership skills. * Clean driving record and willingness to travel to project sites as needed. What CWM Offers You * A culture that values opportunity for growth, development, and internal promotion * Highly competitive Salary * Health Insurance, dental, vision, life insurance, disability benefits programs and 401(k). * Annual Bonus * Company Vehicle CWM is an Equal Opportunity Employer - M/F/V/H. Women and minorities are encouraged to apply.

As a Pipe Layer, you will be a critical member of our pipe crew, responsible for the precise and safe installation of water, sewer, and drainage systems. Your expertise will ensure that pipes are laid accurately, adhering to project plans and specifications. Key Responsibilities: * Pipe Installation: Precisely install pipes according to project plans, blueprints, and design specifications, ensuring proper alignment and grade. * Safety: Strictly adhere to all safety procedures and guidelines to maintain a safe working environment for yourself and your team, as well as compliance with regulatory requirements. * Trenching and Excavation Support: Assist in trenching and excavation tasks, as needed, to prepare the work area for pipe installation. * Material Handling: Safely handle pipes, materials, and equipment required for the project, positioning them accurately for installation. * Quality Control: Ensure that pipe installation work meets project standards and design specifications, including proper bedding and backfilling. * Teamwork: Collaborate effectively with the pipe crew, Pipe Crew Foreman, and other team members to coordinate pipe laying activities and achieve project goals. * Communication: Maintain clear and effective communication with team members and supervisors, reporting progress, challenges, and any issues as needed. * Problem Solving: Identify and address operational challenges or issues that may arise during pipe laying and related tasks. * Equipment Maintenance: Assist in the maintenance and care of tools and equipment used for pipe installation. Qualifications: * Proven experience as a Pipe Layer in the construction industry. * Proficiency in pipe installation techniques, including proper bedding and backfilling. * Knowledge of construction plans, blueprints, and underground utility installation procedures. * Strong commitment to safety and strict adherence to safety protocols. * Excellent teamwork and communication skills. * Willingness to work in varying weather conditions and at different job sites as required. Candidates that accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam is essential to ensure that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Email:

Ames Construction has built America for more than 60 years, and the exceptional people who make up our team are a vital factor in our success. We are a full-service, heavy civil and industrial general contractor that brings innovative solutions to many market segments, from highway and bridge construction to mining and rail. Ames is an employee-owned company that retains its entrepreneurial spirit while offering the experience and stability of a proven construction industry leader. Equipped with our core values of People, Team, Our Bond, Persistence, and Vision, we make communities across the U.S. safer, keep supply chains moving, and lay the groundwork for a sustainable future. By joining Ames, you will be working with talented colleagues at an award-winning, nationally recognized top 65 general contractor. We are seeking a motivated Project Engineer to join our team in the heavy civil construction industry. This role is ideal for individuals passionate about infrastructure development and eager to gain hands-on experience in managing large-scale projects such as highways, bridges, utilities, and site development. Key Responsibilities * Assist Project Managers and Superintendents with daily project operations. * Review and interpret project plans, specifications, and contract documents. * Track project progress, prepare reports, and maintain accurate documentation. * Coordinate with subcontractors, suppliers, and internal teams to ensure timely delivery of materials and services. * Support quality control and safety compliance on job sites. * Assist in cost tracking, budgeting, and schedule updates. * Participate in problem-solving and provide technical support during construction activities. Qualifications * Education: Bachelor's degree in Civil Engineering, Construction Management, or related field. * Experience: Internship or co-op experience in construction preferred but not required. * Strong understanding of construction principles and project management fundamentals. * Proficiency in Microsoft Office Suite; familiarity with scheduling software (e.g., Primavera P6) is a plus. * Excellent communication, organizational, and analytical skills. * Ability to work in a fast-paced environment and adapt to changing priorities. * Must have a valid Driver's License. Ames Construction is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. This position requires ensuring compliance with CMMC, FAR, and Accounting Standards in all Federal efforts.

is responsible for operating a Oruga/Beck l, CZM, IMTor similar drill rigs. Essential Duties and Responsibilities: * Learn and follow safety regulation. * Take actions to avoid potential hazards or obstructions, such as utility lines, other equipment, other workers, or falling objects. * Locate underground services, such as pipes or wires, prior to beginning work. * Monitor operations to ensure that health and safety standards are met. * Coordinate machine actions with other activities, position or move loads in response to hand or audio signals from crew members * Perform preventative maintenance as required to ensure safe and continual service of crane. * Supervise oiling of the drill rig. * Responsible for own and rigger's compliance with company policy, safety guidelines and procedures that pertain to the drill operator's job. * Remains in continual voice (radio), hand, and or communication with rigger/groundsman while operating the drill. * Responsible for creating an environment fostering open communications concerning safety issues. * Participates in safety meetings and other rigger safety programs. * Operates drill to hoist materials and equipment in a safe and efficient manner. Requirements: * Follow safety regulations. * Follow instructions and meet set standards. * Judge distances and slopes accurately. * Make decisions based on verifiable standards. * Must be able to stoop, bend, and crouch and use hands, arms, and legs fully. * Must have good vision and hearing (either naturally or with correction). * Work dusty or dirty surroundings. * Pass construction equipment operator qualification testing/observation. * CDL not required but preferred. Education and Experience: * High School Diploma preferred * Five years verifiable and relevant experience Candidates that accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam is essential to ensure that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Email:

Job Summary: The Crane Operator is responsible for operating various types of cranes to lift, move, and position materials efficiently and precisely. Essential Functions: Operate cranes (e.g., mobile or overhead cranes) to lift, transport, and place materials safely and accurately. Inspect andmaintainequipment, performing routine checks to ensure safety and operational efficiency. Collaborate with team members, including riggers and signal personnel, to ensure smooth workflow and proper communication. Follow all company policies and local regulations to ensure the safety of the worksite and compliance with industry standards. Interpret load charts and assess load weights todeterminesafe operational limits. Respond to and address any operational issues or challenges promptly. Comply with all federal, state, and local laws and regulations. Required Skills/Abilities: Proven experience as a Crane Operator with relevant certifications or licenses (e.g., NCCCO certification). Proficient knowledge of crane operation, safety regulations, and maintenance procedures. Strong hand-eye coordination, precision, and attention to detail. Ability to work outdoors in varying weather conditions and perform physically demanding tasks. Excellent communication and teamwork skills. Commitment to maintaining safe and efficient work environment. Minimum Requirements: Active NCCCO crane certification. 3+ years' experience operating heavy machinery, preferably cranes. Valid Driver's License, Class A preferred. Must be legally authorized to work in the United States. Must be able to read, write, speak, and understand English. Physical Requirements: Sims Crane & Equipment maintains a firm commitment to providing a safe and healthy work environment for its employees and quality services to its clients. Sims Crane & Equipment is a drug-free workplace. Must be able to pass a post-offer / pre-placement drug screen. Must also submit to a post-offer / pre-employment background report & motor vehicle check. Work is performed in a standard construction environment with prolonged periods of standing, sitting and/or walking. Subject to standing, walking, bending, reaching, stooping, and lifting objects up to 100 pounds at times. May occasionally be exposed to dangerous machinery, extreme noise and physical harm in areas requiring hard hats, safety glasses and steel-toed safety shoes. Ability to pass DOT pre-placement physical and physical capacities exam. Disclaimer: An employee must be able to perform the essential functions of the job, with or without reasonable accommodations. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Sims Crane & Equipment is proud to be an Equal Opportunity Employer/Drug and Alcohol-Free Workplace. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status, such as race, religion, color, national origin, sex, sexual orientation, gender identity and age.

As a Motor Grader Operator, you will play a crucial role in our earthwork projects. You will be responsible for operating and maintaining motor graders to ensure the precise grading of construction sites, roads, and other surfaces. Your expertise will contribute to the overall success and safety of our projects. Key Responsibilities: * Equipment Operation: Operate motor graders with precision and expertise to grade surfaces according to project specifications and blueprints. * Safety: Follow all safety procedures and guidelines to ensure a safe working environment for yourself and your team. * Maintenance: Perform routine maintenance on motor graders, including cleaning, lubricating, and reporting any mechanical issues to the maintenance team. * Quality Control: Monitor and maintain the quality of grading work to meet project requirements and standards. * Teamwork: Collaborate effectively with other construction team members, including equipment operators, laborers, and supervisors. * Communication: Communicate clearly and effectively with project managers, supervisors, and fellow team members to ensure smooth project execution. * Adherence to Regulations: Ensure compliance with all relevant regulations and industry best practices. * Problem Solving: Identify and resolve any operational issues or challenges that may arise during grading activities. * Documentation: Maintain accurate records of work performed, including daily equipment inspection reports and work logs. Qualifications: * Proven experience as a Motor Grader Operator in heavy civil construction. * Proficiency in operating and maintaining motor graders. * Knowledge of construction and grading techniques. * Ability to read and interpret construction plans and blueprints. * Strong commitment to safety and adherence to safety protocols. * Excellent teamwork and communication skills. * Physical fitness and stamina to perform the demands of the job. * Willingness to work in varying weather conditions and at different job sites as needed. * Valid [State] driver's license and a clean driving record. Candidates that accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam is essential to ensure that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Email:

Summary: Perform various construction surveying related task utilizing Trimble GPS, survey, and CAD software in order to produce clear, complete, and concise results in a timely manner. Essential Duties and Responsibilities: * Train, educate and assist field personnel in the use and operation of Machine Control GPS equipment * Site localization and set-up, pre-surveys, production surveys and as-builts as necessary * Verify Machine Control calibrations, maintain and troubleshoot GPS problems when necessary * Perform site staking/layout and grade checking as necessary * Produce quantity reports for project managers and superintendents * Practice good recordkeeping skills for survey logs and records Requirements: * Strong mathematical skills. * Excellent Communication skills both oral and written when working alongside all levels of management, co-workers, vendors and clients * Experience with Trimble data collection software & surveying equipment * Proficient with MS office software * Experience with drafting software (AutoCAD, Carlson) preferred * Ability to read, analyze and interpret civil plans and specifications * Must be a motivated self-starter, team player with the desire to learn and advance * Must be able to work in outdoor environments, including prolonged walking and standing on uneven terrain and variable weather conditions * Must be willing to travel. Moderate to extensive overnight travel * Must possess clean driving record to drive company vehicle Education and Experience: * AAS/Technical Certificate in Geodetic/Surveying or 1-3 years related field experience Candidates that accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam is essential to ensure that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Email:

As a Pipe Layer, you will be a critical member of our pipe crew, responsible for the precise and safe installation of water, sewer, and drainage systems. Your expertise will ensure that pipes are laid accurately, adhering to project plans and specifications. Key Responsibilities: * Pipe Installation: Precisely install pipes according to project plans, blueprints, and design specifications, ensuring proper alignment and grade. * Safety: Strictly adhere to all safety procedures and guidelines to maintain a safe working environment for yourself and your team, as well as compliance with regulatory requirements. * Trenching and Excavation Support: Assist in trenching and excavation tasks, as needed, to prepare the work area for pipe installation. * Material Handling: Safely handle pipes, materials, and equipment required for the project, positioning them accurately for installation. * Quality Control: Ensure that pipe installation work meets project standards and design specifications, including proper bedding and backfilling. * Teamwork: Collaborate effectively with the pipe crew, Pipe Crew Foreman, and other team members to coordinate pipe laying activities and achieve project goals. * Communication: Maintain clear and effective communication with team members and supervisors, reporting progress, challenges, and any issues as needed. * Problem Solving: Identify and address operational challenges or issues that may arise during pipe laying and related tasks. * Equipment Maintenance: Assist in the maintenance and care of tools and equipment used for pipe installation. Qualifications: * Proven experience as a Pipe Layer in the construction industry. * Proficiency in pipe installation techniques, including proper bedding and backfilling. * Knowledge of construction plans, blueprints, and underground utility installation procedures. * Strong commitment to safety and strict adherence to safety protocols. * Excellent teamwork and communication skills. * Willingness to work in varying weather conditions and at different job sites as required. Candidates that accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam is essential to ensure that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Email:

Job Summary: This is an entry-level role designed to provide hands-on experience and comprehensive training under the guidance of experienced operators. This is a three year nationally recognized training program and is registered with the Florida Dept. of Education. Essential Functions: Assist experienced operators in the setup, operation, and maintenance of equipment and machinery. Learn and follow safety protocols, industry regulations, and company policies. Perform basic tasks such as loading materials, monitoring equipment, and reporting any operational issues. Participate in training sessions to develop technical skills and knowledge related to equipment operation. Collaborate with team members to ensure smooth workflow and support project objectives. Maintain cleanliness and organization of the work area. Minimum Requirements: At least 2 years' experience operating heavy machinery, preferably cranes. NCCCO Crane Certification High School Diploma or equivalent. Valid Commercial Driver's License, Class A. Must be legally authorized to work in the United States. Must be able to read, write, speak, and understand English. Physical Requirements: Sims Crane & Equipment maintains a firm commitment to providing a safe and healthy work environment for its employees and quality services to its clients. Sims Crane & Equipment is a drug-free workplace. Must be able to pass a post-offer / pre-placement drug screen. Must also submit to a post-offer / pre-employment background report & motor vehicle check. Work is performed in a standard construction environment with prolonged periods of standing, sitting and/or walking. Subject to standing, walking, bending, reaching, stooping, and lifting objects up to 100 pounds at times. May occasionally be exposed to dangerous machinery, extreme noise and physical harm in areas requiring hard hats, safety glasses and steel-toed safety shoes. Ability to pass DOT pre-placement physical and physical capacities exam. Disclaimer: An employee must be able to perform the essential functions of the job, with or without reasonable accommodation. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Sims Crane & Equipment is proud to be an Equal Opportunity Employer/Drug and Alcohol-Free Workplace. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status, such as race, religion, color, national origin, sex, sexual orientation, gender identity and age.