Carbon Steel jobs near me - 27 jobs

This is a temporary, remote position, located on the North Slope, with an expected duration of 6-8 weeks, with the potential for additional work scope to be added. Anticipated start date is March 2026. The typical schedule is 84 hours per week (40 hours straight time and a minimum of 44 hours at time and a half). All meals and lodging are provided by Worley while the employee is on location. Transportation between Anchorage and Prudhoe Bay is provided. Relocation assistance to Alaska is not provided. Worley offers a competitive benefits package, with company paid short-term disability, life insurance, paid sick leave, and 4.5% employer match on 401k. Performs welding of pipe, flanges and various fittings for fabrication or repair of machine parts, plant equipment and structures according to layout, blueprints or work orders using various welding processes. Essential Job Functions: * Constructs, maintains, and modifies piping systems and process equipment related to petrochemical or other industry by welding of pipe, flanges and various fittings using applicable welding techniques and processes required to produces welds that meet applicable codes and client requirements. * Measures pipe routing and draft pipe configuration. * Perform repair, prep, grinding and re-weld procedures on pipe to meet proper welding codes * Completes records, maintains tools and equipment, and performs various cleanup and housekeeping activities. Knowledge, Skills & Abilities: * Knowledge of the AWS, ANSI and ASME codes. * Knowledge of operation of welding equipment, beveling machines, electrodes, fluxes, shielding gasses and welding processes. * Knowledge of the various size and grades of welding electrodes, the proper use of electrodes and welding processes, the appearance of a proper fit-up and the appearance of properly cleaned and prepared surface * Ability to properly use and care for the tools and equipment and welding electrodes commonly used on an industrial project. * Ability to read, understand engineering prints. * Advanced ability to lay out, fit, and weld fabricated piping components to assemble tanks and pressure vessels according to blueprints, specifications, and knowledge of welding. * General knowledge of carbon steel welding techniques. * General knowledge including alloy metals, stainless steel, and duplex welding techniques. * Thorough knowledge of the AWS, ANSI and ASME codes. Physical Demands/Work Environment: Work is performed in a remote Arctic environment with limited medical resources. Candidate understands the site is approximately 840 miles (at least 4 hours by air ambulance) from surgical, specialist, and tertiary medical care, and where medical evacuation from this location may be significantly delayed due to weather conditions. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the essential functions of this job, the employee is required to: * Must have ability to stand, walk on level, uneven and slippery surfaces, sit, squat, kneel, crawl, reach through low and high ranges, work overhead, and exhibit normal balance and coordination. These basic physical requirements are essential for safe performance of the job in harsh environments with exposure to very cold temperatures and while wearing arctic gear. * Standing for prolonged periods of time. * Driving for prolonged periods of time in the dark and inclement weather * Ability to climb scaffold, ramps, stairs, equipment, portable ladders, and/or wellhouse/tank/facility fixed ladders of 20 feet or greater. * Ability to wear and utilize fall protection within manufacturer specifications. * Lift 50 lbs. from floor to waist with two hands. * Lift 50 lbs. from floor to shoulder with two hands. * Carry 50 lbs. for 15 feet with two hands. * Push/pull 60 lbs. sled for 20 feet. * Push/pull 90 lbs. cart for 20 feet. This job description is intended to describe the nature and level of work being performed by people assigned to this position. It is not to be construed as an exhaustive list of all responsibilities and duties required of the job incumbents. Worley provides reasonable accommodation to qualified individuals with disabilities, including both applicants and employees, to allow the individual to perform the essential functions of the job, unless doing so would create an undue hardship. In-Vehicle Monitoring System: As part of our commitment to safety and accountability, company vehicles are equipped with in-cab cameras and vehicle monitoring systems. These systems may record video and audio, as well as collect GPS location, vehicle speed, harsh braking, rapid acceleration and other driving behaviors. All data is subject to review by management to ensure compliance with company policies and safe driving practices. * Three to five (3-5) years' experience pipe welding in an industrial environment * Required to pass FCAW, GTAW and SMAW pipe weld tests upon offer * Valid driver's license including ability to be insured by Worley's auto insurer * High School diploma or equivalent GED * North Slope Training Cooperative (NSTC). Worley can provide NSTC certification training if needed Preferred Qualifications: * Petrochemical, oilfield and arctic experience Moving forward together We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard. And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology./span> Whatever your ambition, there's a path for you here. And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change. Recruitment fraud notice Worley has been notified of fraudulent employment inquiries and/or offers being made to prospective candidates. These activities have generally occurred via email but may occur by other means. Generally prospective candidates are being asked to provide detailed personal information and possibly being asked to pay application fees. Worley does NOT require any payment or fees from prospective candidates. Do not provide any personal/financial information whatsoever, and do not make any payments requested by any email or other communication requesting such data to secure employment with Worley or any of its subsidiaries. If you receive such a message, you are advised to contact your local law enforcement agency and provide any details you may have. If you are interested in employment with Worley, please view the career information on our website and follow application instructions for career opportunities for which you are qualified.

Workplace Type: On-Site Job Shift: 1st Welcome to Ryerson, where exceptional career opportunities await. As a leading provider of industrial metal products and services since 1842, we are committed to excellence and best-in-class customer service. Join our team and be a part of a legacy of excellence, where your contributions will be valued, and your development supported. Ryerson offers a dynamic, quality-focused, environment, ideal for advancing your career and making your mark in the metals industry. As a Welder at Ryerson, you will be responsible for applying welding and fabricating processes to metal and ensuring quality and customer standards are met. Roles and Responsibilities * Applies appropriate welding and assembling applications in a fabrication environment and processes metals such as carbon steel, stainless steel, and aluminum * Works according to the layouts, work orders, and blueprints MIG and TIG welding equipment; will need to lay out and mark weld points on parts or sub-assemblies of some material; will also need to position pieces to be welded into jigs and fixtures using measuring instruments and hand tools * Inspects completed work for conformance to specifications * Observes all standard safety practices and maintains and completes all required records * Working in a safe manner as outlined during training and using prescribed safety equipment including PPE * All other duties as assigned or duties, responsibilities, and activities may change at any time with or without notice Requirements * Successfully pass a skills-based assessment - evaluates your reading, math, inspections & measurement, attention to detail, and problem-solving skills * Minimum 3 years experience in a steel or industrial manufacturing setting preferred * Extensive MIG welding experience, TIG welding experience preferred * Forklift and overhead crane experience * Physical ability to pass physical requirements exam for vision, hearing, and mobility * Successful candidates will be enrolled in a registered apprenticeship program as part of their onboarding Wage: $28.82 - $32.50 hourly. A starting hourly wage higher than $28.82 is based on a level of experience and education that significantly exceeds the minimum requirements and is commensurate with the compensation scale. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex (including gender identity, sexual orientation or preference, and pregnancy), age, national origin, religion, disability or genetic information, marital status, status as a veteran, or any other federal, state or local protected class or artificial barrier.

Overview KADANT BLACK CLAWSON LLC is an established leader in equipment and systems for the international pulp and paper process industries. For 150 years, we've helped our customers reduce their input costs and improve efficiency through innovative products and technologies. Our sustainability efforts have been nationally recognized, and Kadant is also listed on the New York Stock Exchange (KAI). Our state-of-the-art manufacturing facility is located in Lebanon, OH, where we design and manufacture our products for customers across the globe. We currently seek to fill the position of Welder on first shift (T-F 6 AM to 4:30 PM) to assemble and weld components according to blueprints or specific instructions, all while advancing KBC's mission of being a forward-thinking, collaborative, and ethical business. Responsibilities Welds components to specified instructions, utilizing standard welding equipment (TIG, Flux Core, MIG, Stick) to predetermined dimensions and tolerance. Verifies and acknowledges component part is properly prepared, fabricated, and braced for the weld process specified. Able to operate brake press, hydraulic presses, drill press, and hydraulic rollers. Maintains, organizes, and cleans equipment and the work area. Accurately records job transactions and router hours. Abides by all KBC policies with emphasis on attendance and safety. Performs other related duties as assigned. Qualifications Thorough understanding of machines and tools used in welding including designs, uses, maintenance and repair. Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models and blueprints. Excellent ability to read and listen to assignments given in a variety of forms. Basic understanding of mathematics as related to welding assignments. Demonstrates KBC values of personal accountability, discipline, trust, and proactive action. High school diploma or general education degree (GED required). Vocational training course completion is preferred. Must have obtained ASME 9 certification, AWS D1.1 certification, or equivalent on Stainless and Carbon Steel, MIG, TIG, and Flux Core, along with three years' work experience in welding MIG, TIG and Flux core. Also required is the ability to read and interpret blueprints, read measuring instruments (i.e. tape measures, etc.), and operate a forklift and overhead crane. Must be dependable with an excellent attendance record in order to maintain strict production schedules. Equal Opportunity Employer M/F/Disability/Veteran All benefits, including medical, dental, vision, PTO, and 401k are effective upon hire! Position also eligible for our production bonus plan (up to 2K per year)! Thorough understanding of machines and tools used in welding including designs, uses, maintenance and repair. Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models and blueprints. Excellent ability to read and listen to assignments given in a variety of forms. Basic understanding of mathematics as related to welding assignments. Demonstrates KBC values of personal accountability, discipline, trust, and proactive action. High school diploma or general education degree (GED required). Vocational training course completion is preferred. Must have obtained ASME 9 certification, AWS D1.1 certification, or equivalent on Stainless and Carbon Steel, MIG, TIG, and Flux Core, along with three years' work experience in welding MIG, TIG and Flux core. Also required is the ability to read and interpret blueprints, read measuring instruments (i.e. tape measures, etc.), and operate a forklift and overhead crane. Must be dependable with an excellent attendance record in order to maintain strict production schedules. Equal Opportunity Employer M/F/Disability/Veteran All benefits, including medical, dental, vision, PTO, and 401k are effective upon hire! Position also eligible for our production bonus plan (up to 2K per year)! Welds components to specified instructions, utilizing standard welding equipment (TIG, Flux Core, MIG, Stick) to predetermined dimensions and tolerance. Verifies and acknowledges component part is properly prepared, fabricated, and braced for the weld process specified. Able to operate brake press, hydraulic presses, drill press, and hydraulic rollers. Maintains, organizes, and cleans equipment and the work area. Accurately records job transactions and router hours. Abides by all KBC policies with emphasis on attendance and safety. Performs other related duties as assigned.

Job DescriptionPrecision Exotic Metals Welder-Fabricator Start your day with a blueprint in hand and a clear plan. You'll interpret drawings, fixture parts, and execute high-spec welds on carbon steel, stainless, Inconel, and aluminum. Some days you'll jump into our robotic cell to program, set up, and run automated welds; other days you'll form plate and structural shapes, compute angles with trig tables, and bring complex layouts to life. Throughout your shift, you'll verify quality, document results, and drive toward-and beyond-routed standards. Compliance requirements Since we are a Federal Contractor: Must be a US Citizen Must be over 18 Must be able to pass drug test Cannot have any past felonies What you'll do Produce high-quality MIG and TIG welds to fabricate parts, products, and equipment. Repair components by straightening or reshaping with or without heat and hydraulic tools. Program, set up, and operate robotic welding machinery as needed. Use trigonometric charts/tables to determine side lengths and angles. Create flat layouts; set up and run fabrication equipment to form sheet, plate, and structural materials to size. Consistently achieve or surpass routed production and quality standards. Who you are 3-5 years of MIG and TIG experience across carbon steel, stainless, Inconel, and aluminum. Comfortable operating foundational fab tools (e.g., shear, cut-off saw). Strong blueprint and weld-symbol literacy; GD&T familiarity. High school diploma or equivalent required. Experience with robotic welding machines is a plus. Tools and processes you'll work with MIG, TIG, Stick, and Flux-Cored Arc welding Blueprint reading and GD&T interpretation Shifts and compensation First shift: Monday-Friday, 5:30 a.m.-4:00 p.m.; 30-minute unpaid lunch; approximately 50 hours/week with overtime. Second shift: Choose from 4x10s, 5x10s, or 4x12s; includes a 25% shift differential. Pay: $20-$40 per hour, commensurate with skill and experience. Equal Opportunity Employer M/F/D/V

This is a temporary, remote position, located on the North Slope, with an expected duration of 6-8 weeks, with the potential for additional work scope to be added. Anticipated start date is March 2026. The typical schedule is 84 hours per week (40 hours straight time and a minimum of 44 hours at time and a half). All meals and lodging are provided by Worley while the employee is on location. Transportation between Anchorage and Prudhoe Bay is provided. Relocation assistance to Alaska is not provided. Worley offers a competitive benefits package, with company paid short-term disability, life insurance, paid sick leave, and 4.5% employer match on 401k. Job Purpose: The structural welder/fitter fabricator performs welding of metal components for fabrication or repair of machine parts, plant equipment and structures according to layout, blueprints or work orders using brazing and a variety of arc and gas welding equipment. Essential Job Functions: * Lay out, fits, and welds fabricated, cast, and forged components to assemble structural forms, such as machinery frames, tanks, pressure vessels, furnace shells, and building and bridge parts, according to blueprints, specifications and knowledge of welding and metallurgy. * Select equipment and plans layout, assembly, and welding, applying knowledge of geometry, physical properties of metal machining weld shrinkage, and welding techniques. * Lay out, positions, align, and fit components together. * Bolt, clamp, and tack-weld parts to secure in position for welding. * Weld in flat, horizontal, vertical, or overhead positions. * Examine weld for bead size and other specifications. * Clean or degrease weld joint or work piece. * Set up equipment and weld parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. * Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torch, straightening press, and hand tools. * Complete records, maintains tools and equipment, and performs various cleanup and housekeeping activities. Knowledge, Skills, Ability: * Knowledge of the AWS, ANSI and ASME codes. * Knowledge of operation of welding equipment, electrodes, fluxes, shielding gasses and welding processes. * Knowledge of carbon steel and other alloy metals, including stainless steel and aluminum. * Knowledge of the various size and grades of welding electrodes, the proper use of electrodes and welding processes, the appearance of a proper fit-up and the appearance of properly cleaned and prepared surface. * Ability to properly use and care for the tools and equipment and welding electrodes commonly used on an industrial project. * Ability to operate all hand tools and power tools associated with welding process. * Ability to prep steel shapes. * Ability to work with minimal supervision and be capable of performing assigned tasks with limited general technical guidance. * Ability to read, understand engineering prints. * Ability to work as part of a team; communicate effectively with fellow workers and alternate. * Ability to demonstrate adherence to established safety policies and procedures. * Ability to demonstrate support for the company's environmental management system. Physical Demands/Work Environment: Work is performed in a remote Arctic environment with limited medical resources. Candidate understands the site is approximately 840 miles (at least 4 hours by air ambulance) from surgical, specialist, and tertiary medical care, and where medical evacuation from this location may be significantly delayed due to weather conditions. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the essential functions of this job, the employee is required to: * Must have ability to stand, walk on level, uneven and slippery surfaces, sit, squat, kneel, crawl, reach through low and high ranges, work overhead, and exhibit normal balance and coordination. These basic physical requirements are essential for safe performance of the job in harsh environments with exposure to very cold temperatures and while wearing arctic gear. * Standing for prolonged periods of time. * Driving for prolonged periods of time in the dark and inclement weather * Ability to climb scaffold, ramps, stairs, equipment, portable ladders, and/or wellhouse/tank/facility fixed ladders of 20 feet or greater. * Ability to wear and utilize fall protection within manufacturer specifications. * Lift 50 lbs. from floor to waist with two hands. * Lift 50 lbs. from floor to shoulder with two hands. * Carry 50 lbs. for 15 feet with two hands. * Push/pull 60 lbs. sled for 20 feet. * Push/pull 90 lbs. cart for 20 feet. This job description is intended to describe the nature and level of work being performed by people assigned to this position. It is not to be construed as an exhaustive list of all responsibilities and duties required of the job incumbents. Worley provides reasonable accommodation to qualified individuals with disabilities, including both applicants and employees, to allow the individual to perform the essential functions of the job, unless doing so would create an undue hardship. In-Vehicle Monitoring System: As part of our commitment to safety and accountability, company vehicles are equipped with in-cab cameras and vehicle monitoring systems. These systems may record video and audio, as well as collect GPS location, vehicle speed, harsh braking, rapid acceleration and other driving behaviors. All data is subject to review by management to ensure compliance with company policies and safe driving practices. * Three (3) years' experience in structural welding and/or training; or equivalent combination of education and experience. * Must pass structural weld test upon offer. Welding tests include SMAW and FCAW welding process codes, D1.1 code, and ASME Section IX. * Valid driver's license and the ability to be covered by Worley auto insurer. * High school diploma or equivalent (GED). * North Slope Training Cooperative (NSTC). Worley can provide NSTC certification training if needed. Preferred Qualifications: * Industrial, petrochemical, oilfield or arctic experience. Moving forward together We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard. And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology./span> Whatever your ambition, there's a path for you here. And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change. Recruitment fraud notice Worley has been notified of fraudulent employment inquiries and/or offers being made to prospective candidates. These activities have generally occurred via email but may occur by other means. Generally prospective candidates are being asked to provide detailed personal information and possibly being asked to pay application fees. Worley does NOT require any payment or fees from prospective candidates. Do not provide any personal/financial information whatsoever, and do not make any payments requested by any email or other communication requesting such data to secure employment with Worley or any of its subsidiaries. If you receive such a message, you are advised to contact your local law enforcement agency and provide any details you may have. If you are interested in employment with Worley, please view the career information on our website and follow application instructions for career opportunities for which you are qualified.

We are seeking two (2) experienced Welders to join our team under the direction of the Maintenance Manager. This role is responsible for performing welding and fabrication tasks on tanks, pressure vessels, buildings, and piping systems. The ideal candidate will have strong technical skills in welding processes and a commitment to safety and quality workmanship. Key Responsibilities: Perform SMAW and GTAW welding processes on stainless and carbon steel. Produce high-quality welds that meet NDE (non-destructive examination) requirements. Weld on tanks, pressure vessels, structures, and piping systems per blueprints and metallurgy specifications. Read and interpret blueprints, isometric drawings, and P&IDs to complete work accurately. Perform layout and preparation of materials for welding and fabrication. Troubleshoot and repair leaks on tanks, pumps, and process equipment. Ensure all work is completed safely and in compliance with industry standards. Willing to assist with additional maintenance tasks as needed. Requirements: High school diploma or equivalent. Proven experience as a welder, preferably in an industrial or chemical plant setting. Proficiency in SMAW and GTAW welding processes. Ability to read and interpret blueprints and P&IDs. Strong attention to detail and ability to work within precise tolerances. Basic mathematical skills for measurement and layout. Ability to work independently and follow established guidelines. Strong commitment to safety and quality. Why ALTIVIA? At ALTIVIA, we are more than a company-we are a community committed to rising together. Guided by Responsibility, Innovation, Safety, and Excellence, we foster a culture of accountability, creativity, and collaboration. We take ownership of our actions, embrace an entrepreneurial mindset, and push boundaries to drive innovation. Safety is at the core of everything we do, ensuring a secure and healthy work environment. With a relentless drive for excellence, we deliver exceptional results for our customers and one another. Join ALTIVIA and be part of a team that values integrity, growth, and shared success. Disclaimer ALTIVIA reserves the right to modify, interpret, or adjust this job description at any time as needed to meet business needs and requirements. Visa Sponsorship ALTIVIA does not offer visa sponsorship for this position. Candidates must be authorized to work in the United States without the need for current or future visa sponsorship. Equal Opportunity Employer ALTIVIA is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees, free from discrimination based on race, religion, gender, national origin, disability, or any other legally protected status. Notice to External Recruiters Please note that we are not accepting resumes from external recruiting agencies for this position. Any unsolicited resumes submitted by agencies will not be considered, and ALTIVIA will not be responsible for any associated fees.

Overview KADANT BLACK CLAWSON LLC is an established leader in equipment and systems for the international pulp and paper process industries. For 150 years, we've helped our customers reduce their input costs and improve efficiency through innovative products and technologies. Our sustainability efforts have been nationally recognized, and Kadant is also listed on the New York Stock Exchange (KAI). Our state-of-the-art manufacturing facility is located in Lebanon, OH, where we design and manufacture our products for customers across the globe. We currently seek to fill the position of Welder on second shift (M-TH 4:15 PM to 2:45 AM) to assemble and weld components according to blueprints or specific instructions, all while advancing KBC's mission of being a forward-thinking, collaborative, and ethical business. Responsibilities Welds components to specified instructions, utilizing standard welding equipment (TIG, Flux Core, MIG, Stick) to predetermined dimensions and tolerance. Verifies and acknowledges component part is properly prepared, fabricated, and braced for the weld process specified. Able to operate brake press, hydraulic presses, drill press, and hydraulic rollers. Maintains, organizes, and cleans equipment and the work area. Accurately records job transactions and router hours. Abides by all KBC policies with emphasis on attendance and safety. Performs other related duties as assigned. Qualifications Thorough understanding of machines and tools used in welding including designs, uses, maintenance and repair. Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models and blueprints. Excellent ability to read and listen to assignments given in a variety of forms. Basic understanding of mathematics as related to welding assignments. Demonstrates KBC values of personal accountability, discipline, trust, and proactive action. High school diploma or general education degree (GED required). Vocational training course completion is preferred. Must have obtained ASME 9 certification, AWS D1.1 certification, or equivalent on Stainless and Carbon Steel, MIG, TIG, and Flux Core, along with three years' work experience in welding MIG, TIG and Flux core. Also required is the ability to read and interpret blueprints, read measuring instruments (i.e. tape measures, etc.), and operate a forklift and overhead crane. Must be dependable with an excellent attendance record in order to maintain strict production schedules. Equal Opportunity Employer M/F/Disability/Veteran All benefits, including medical, dental, vision, PTO, and 401k are effective upon hire! Position also eligible for our production bonus plan (up to 2K per year)! Thorough understanding of machines and tools used in welding including designs, uses, maintenance and repair. Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models and blueprints. Excellent ability to read and listen to assignments given in a variety of forms. Basic understanding of mathematics as related to welding assignments. Demonstrates KBC values of personal accountability, discipline, trust, and proactive action. High school diploma or general education degree (GED required). Vocational training course completion is preferred. Must have obtained ASME 9 certification, AWS D1.1 certification, or equivalent on Stainless and Carbon Steel, MIG, TIG, and Flux Core, along with three years' work experience in welding MIG, TIG and Flux core. Also required is the ability to read and interpret blueprints, read measuring instruments (i.e. tape measures, etc.), and operate a forklift and overhead crane. Must be dependable with an excellent attendance record in order to maintain strict production schedules. Equal Opportunity Employer M/F/Disability/Veteran All benefits, including medical, dental, vision, PTO, and 401k are effective upon hire! Position also eligible for our production bonus plan (up to 2K per year)! Welds components to specified instructions, utilizing standard welding equipment (TIG, Flux Core, MIG, Stick) to predetermined dimensions and tolerance. Verifies and acknowledges component part is properly prepared, fabricated, and braced for the weld process specified. Able to operate brake press, hydraulic presses, drill press, and hydraulic rollers. Maintains, organizes, and cleans equipment and the work area. Accurately records job transactions and router hours. Abides by all KBC policies with emphasis on attendance and safety. Performs other related duties as assigned.

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. The Welder III position will be responsible for performing high-mix/low-volume manual TIG welding of Stainless Steel and Aluminum in a high-quality medical device manufacturing environment What You'll do as a Welder III Set-up and operate TIG welding equipment using prescribed methods and procedures to weld parts within acceptable tolerances and standards. Build weldments through manual layout and manual surface prep processes when required. Read and interpret welding blueprints including standard welding symbols, travelers, and other work instruction documents. Positions parts to be joined using fixtures and other holding or positioning devices. Use required measuring instruments and gages to check and ensure parts meet dimensional requirements. Assist in problem solving activities. Complies with all quality standards. Capable of mentor and training Welder I and Welder II. Capable of fitting, purging, and welding complete joint penetration (CJP) welds. Ability to perform troubleshooting of welding equipment, materials, and fixturing. Capable of performing visual welding inspections. Ability to interpret AWS standards and welding symbols. Ability to produce all product lines within the designated area. The Experience, Skills and Abilities Needed Required: High School Diploma or GED 3-5 years of Welding experience. 2 years of experience working in a solid metal fabrication/machining environment required. Preferred: Welding experience in flux core, TIG, stick, and carbon steel preferred. Certification in GTAW (TIG) is considered a plus. Other: Must be able to use prescribed manual processes in TIG welding of stainless steel, mild steel, and aluminum. Must be able to read and interpret welding blueprints, including all standard welding symbols. Must be able to use precision measuring instruments and gauges. Must have strong math and troubleshooting proficiency and basic computer skills. Must have basic welding inspection knowledge and conduct visual inspection. Pay rate for this opportunity is $27.00. This position is eligible for bonus participation. Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits Open until position is filled. STERIS is a leading global provider of products and services that support patient care with an emphasis on infection prevention. WE HELP OUR CUSTOMERS CREATE A HEALTHIER AND SAFER WORLD by providing innovative healthcare and life sciences products and services around the globe. For more information, visit *************** If you need assistance completing the application process, please call ****************. This contact information is for accommodation inquiries only and cannot be used to check application status. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity. The full affirmative action program, absent the data metrics required by § 60-741.44(k), shall be available to all employees and applicants for employment for inspection upon request. The program may be obtained at your location's HR Office during normal business hours.

Job Description About Komline As a pioneering leader in advanced separation technologies, Komline has established a global reputation for engineering excellence. Through our combination of innovative design, cutting-edge manufacturing capabilities, and decades of industry experience, we consistently deliver the highest quality equipment from our integrated manufacturing facilities. Serving our core markets of Water & Process, Agricultural & Renewables, and Industrials, we pride ourselves on providing comprehensive separation solutions precisely tailored to our clients' requirements. With a strong track record of strategic growth and acquisitions, Komline continues to expand its solution portfolio and technical capabilities while maintaining our commitment to innovation and customer satisfaction. This Opportunity For our team at Komline-Henry, “always doing what is right” is not just a phrase, it's our way of serving business. Throughout the years of innovation, we've developed numerous patented industrial coolant filtration products that are used all over the world. We bring our products to life using 3D software to demonstrate to our customers real-life representations which have aided in our focus to provide superior customer focus and service. The Welder/Fabricator is responsible for the daily fabrication activities within the plant which include blueprint reading, layout, fabrication, assembly, welding, cutting, torching, and grinding. In addition, this position may involve loading and unloading all inbound and outbound freight, supplies and machinery as well as directing other fabricators in the facility. Roles and Responsibilities Able to read and interpret blueprints and piping schematics Able to read a measuring tape Intermediate knowledge of welding, cutting, torching, grinding, drilling, and tapping Able to layout, fabricate, and assemble assemblies Able to read and interpret tools to produce a level, plumb and square assembly Mechanically inclined with hand tools and power tools. (Grinders, cut off grinders, drill press, hammer, sockets, wrenches, etc) Primary welding is MIG and Dual Sheild wire. (Plate, structural steel & pipe) Weld carbon steel (including plate, structural steel, and pipe) Weld stainless steel (including plate, structural steel, and pipe) Able to weld out of position Able to climb ladders and work off the ground up to 12' or higher, as required Load/unload freight and move material within the plant Operate large machinery such as forklifts and overhead cranes Operate other machinery such as aerial lifts, drill presses, belt sanders, saws, and pipe threaders Maintain quality of manufactured equipment Actual welding time for this position is only 10% - 15% of time. Other duties as assigned Required Qualifications 2+ years' experience in a fabrication manufacturing environment Fabrication experience with large, intricate machinery preferred High school diploma or GED equivalent Basic knowledge of Microsoft Office (Word, Excel, Outlook) Fork truck experience and current fork truck license preferred Ability to rig, sling and use overhead crane to lift work pieces Ability to track and report time spent on projects using time and attendance system Able to work independently and in a team environment Intermediate knowledge of and the ability to read and interpret blue prints Intermediate knowledge of measuring systems, including standard and metric, and the ability to read a tape measure The position involves reading, writing, mathematics and measuring Ability to lift at least 50 pounds, and have the ability to climb, stand, stoop or kneel for extended periods of time Equal Opportunity Statement: Komline is an EEO employer - M/F/Vets/Disabled

The MIG Welder is responsible for welding metal grating products to precise specifications using MIG welding and related tools. This position performs layout, assembly, welding, and visual inspection tasks while operating safely and efficiently in a fast-paced production environment. Mig Welder team members support a broad range of cutting and joining processes, including the use of plasma and oxy/fuel tools, and are expected to build independence and technical skill over time. SUMMARY: The MIG (metal inert gas) Welder position plays a hands-on role in the assembly and welding of steel and aluminum grating components. Responsibilities include reading job travelers and blueprints, setting up and operating MIG welding equipment, and performing visual inspections to ensure weld quality. The role also includes the use of plasma and oxy/fuel cutting equipment for material prep and trimming tasks. Mig Welder employees must demonstrate accuracy, consistency, and safe material handling while supporting housekeeping, team collaboration, and continuous improvement. With experience, individuals in this role are expected to take on tasks of increasing complexity with limited supervision. As a faith-based organization rooted in biblical principles, we strive to reflect these values in our work, relationships, and decision-making. We expect all associates to learn, embrace, and actively model our core values through their actions, choices, and collaboration with others. This commitment is essential to sustaining our culture and achieving shared success. This job description does not describe all activities, duties, responsibilities, or physical demands that are required of the employee for this job. Likewise, the work environment described is merely representative. Duties, responsibilities, activities, physical demands, and work environment may change at any time with or without notice. ESSENTIAL DUTIES/RESPONSIBILITIES: Interpret job travelers, blueprints, and welding symbols to accurately lay out and assemble grating components. Set up and operate MIG welding equipment according to Welding Procedure Specifications (WPS) for various materials. Perform trimming, edge prep, and related work using plasma and oxy/fuel cutting equipment. Operate overhead cranes, forklifts, saws, presses, grinders, and other shop equipment safely and efficiently. Pass certification tests, including fillet weld and tread certifications, and assist with routine visual inspections. Monitor part quality and support reduction of scrap and rework. Perform basic maintenance on welding tools and equipment. Participate in cross-training and help onboard new team members. Maintain a clean and organized work area to promote safety, efficiency, and production flow. Complete accurate ERP transactions for material usage, production reporting, and time tracking to support inventory accuracy and cost control. Meet or exceed established productivity and quality standards that support departmental Key Performance Indicators (KPIs), ensuring efficient and accurate job performance. Consistently apply safe work practices in accordance with company policies to promote a zero lost time environment and maintain a safe workplace. EDUCATION, WORK EXPERIENCE, AND PROFICIENCIES: A high school diploma or equivalent is required. Proficiency in MIG welding and related techniques (Oxy/Fuel, plasma cutting) for carbon steel, stainless steel, and aluminum is essential. Candidates must have experience with overhead cranes, power tools, blueprint reading, and tape measure usage in both standard and metric units. Familiarity with ERP systems, especially Epicor, is preferred. Successful completion of welding tests and the ability to interpret welding symbols and perform basic math (including fractions) are required. Two or more years of metal fabrication experience and AWS certifications (D1.1, D1.5, D1.6, or D1.2) are preferred. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee will encounter repetitive movement tasks, requiring standing, walking, stooping, bending, reaching, grasping, pushing, and pulling grating material of various sizes and weights for long periods of time. The employee must regularly lift or move up to 50 pounds and occasionally lift or move up to 75 pounds, using proper lifting techniques, help from another employee, or other available resources such as lifting or moving equipment. The role also requires the ability to take stairs, work around constantly moving machinery, and exposure to weather elements. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee will be regularly working on the production floor, requiring the use of Personal Protective Equipment (PPE). Exposure to noise, dust, heat, and cold is regular, as is exposure to machine and tool hazards requiring care and attention to safety rules and standards. EEO STATEMENT: Our company provides equal employment opportunities to all applicants without regard to race, color, religion, gender, national origin, age, disability, veteran status, or any other characteristic or status protected under local, state, or federal laws.

Industry-leading 25% Night Shift Differential YOUR SCHEDULE, YOUR CHOICE, YOUR PREMIUM PAY! Two Shifts Days: 10-hour shifts starting between 5 & 6 am Nights start at 5 pm: Your Schedule, Your Choice, Your Premium Pay. M-F 8 hrs. or 10 hrs. M-TH 10 hrs. or 12 hrs. Retirees- work a part-time schedule on days or nights and receive a benefits package. FABRICATOR Do you love to weld an assortment of products using multiple fabrication methods? Do you have a passion for this country and want to be a part of the team that supplies products to our great military? Take a look at our openings for fabricators!! Job Description: Works from blueprints, work orders, and verbal instructions to produce high quality welds from a variety of exotic metals. May program, set up and operate robotic welding machines. Responsibilities: Welds metal components to fabricate products, parts or equipment. Repairs products of parts by straightening or reshaping with or without the use of heat and/or hydraulic equipment. Achieve or surpass routed standards. Calculate side lengths and/or angles using trigonometric charts and tables. Figure flat layout, setup and operate various equipment to form sheet, plate and structural shapes to produce properly sized material. Qualifications: 3-5 years experience in MIG & TIG welding of carbon steel, stainless, Inconel and aluminum. Ability to run basic fabrication equipment (shear, cut-off saw, etc.) Ability to read blueprints and weld symbols. Minimum of high school diploma or equivalent. Experience with robotic weld machines is a plus. Equal Opportunity Employer M/F/D/V All applicants will be considered for this position based upon experience and knowledge, without regard to race, color, religion, national origin, sexual orientation, ancestry, marital, disabled or veteran status. GTC is committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment. Powered by JazzHR TOIqXnZPfe

The MIG Welder is responsible for welding metal grating products to precise specifications using MIG welding and related tools. This position performs layout, assembly, welding, and visual inspection tasks while operating safely and efficiently in a fast-paced production environment. Mig Welder team members support a broad range of cutting and joining processes, including the use of plasma and oxy/fuel tools, and are expected to build independence and technical skill over time. SUMMARY: The MIG (metal inert gas) Welder position plays a hands-on role in the assembly and welding of steel and aluminum grating components. Responsibilities include reading job travelers and blueprints, setting up and operating MIG welding equipment, and performing visual inspections to ensure weld quality. The role also includes the use of plasma and oxy/fuel cutting equipment for material prep and trimming tasks. Mig Welder employees must demonstrate accuracy, consistency, and safe material handling while supporting housekeeping, team collaboration, and continuous improvement. With experience, individuals in this role are expected to take on tasks of increasing complexity with limited supervision. As a faith-based organization rooted in biblical principles, we strive to reflect these values in our work, relationships, and decision-making. We expect all associates to learn, embrace, and actively model our core values through their actions, choices, and collaboration with others. This commitment is essential to sustaining our culture and achieving shared success. This job description does not describe all activities, duties, responsibilities, or physical demands that are required of the employee for this job. Likewise, the work environment described is merely representative. Duties, responsibilities, activities, physical demands, and work environment may change at any time with or without notice. ESSENTIAL DUTIES/RESPONSIBILITIES: Interpret job travelers, blueprints, and welding symbols to accurately lay out and assemble grating components. Set up and operate MIG welding equipment according to Welding Procedure Specifications (WPS) for various materials. Perform trimming, edge prep, and related work using plasma and oxy/fuel cutting equipment. Operate overhead cranes, forklifts, saws, presses, grinders, and other shop equipment safely and efficiently. Pass certification tests, including fillet weld and tread certifications, and assist with routine visual inspections. Monitor part quality and support reduction of scrap and rework. Perform basic maintenance on welding tools and equipment. Participate in cross-training and help onboard new team members. Maintain a clean and organized work area to promote safety, efficiency, and production flow. Complete accurate ERP transactions for material usage, production reporting, and time tracking to support inventory accuracy and cost control. Meet or exceed established productivity and quality standards that support departmental Key Performance Indicators (KPIs), ensuring efficient and accurate job performance. Consistently apply safe work practices in accordance with company policies to promote a zero lost time environment and maintain a safe workplace. EDUCATION, WORK EXPERIENCE, AND PROFICIENCIES: A high school diploma or equivalent is required. Proficiency in MIG welding and related techniques (Oxy/Fuel, plasma cutting) for carbon steel, stainless steel, and aluminum is essential. Candidates must have experience with overhead cranes, power tools, blueprint reading, and tape measure usage in both standard and metric units. Familiarity with ERP systems, especially Epicor, is preferred. Successful completion of welding tests and the ability to interpret welding symbols and perform basic math (including fractions) are required. Two or more years of metal fabrication experience and AWS certifications (D1.1, D1.5, D1.6, or D1.2) are preferred. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee will encounter repetitive movement tasks, requiring standing, walking, stooping, bending, reaching, grasping, pushing, and pulling grating material of various sizes and weights for long periods of time. The employee must regularly lift or move up to 50 pounds and occasionally lift or move up to 75 pounds, using proper lifting techniques, help from another employee, or other available resources such as lifting or moving equipment. The role also requires the ability to take stairs, work around constantly moving machinery, and exposure to weather elements. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee will be regularly working on the production floor, requiring the use of Personal Protective Equipment (PPE). Exposure to noise, dust, heat, and cold is regular, as is exposure to machine and tool hazards requiring care and attention to safety rules and standards. EEO STATEMENT: Our company provides equal employment opportunities to all applicants without regard to race, color, religion, gender, national origin, age, disability, veteran status, or any other characteristic or status protected under local, state, or federal laws.

Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Cincinatti, OH. Most positions are first shift with a pay scale of $22-28/hour based on experience & skill level. If you are a Welder and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: MIG, TIG, Stick & Structural Welding Air Arc Repair Welding Pipe & Mechanical Flat/Vertical Carbon Steel Requirements Any Welding Certifications are a Plus Basic Tools for the Trade Proper PPE must be worn: Have your own Hood and Gloves/Leathers Company Details Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: Vacation Pay Health insurance 401(k) profit-sharing savings plan Incentive programs Tool purchase programs & MORE! Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen's full website. Recruiter Name Meghan Gorham Location US-OH-CINCINNATI

Job DescriptionBenefits: 401(k) 401(k) matching Health insurance Paid time off Training & development Vision insurance Schedule: MondayFriday, 5:00 AM 1:30 PM Mid-State Sales, an ISO 9001-certified manufacturing company, is seeking an experienced and detail-oriented TIG Welder to join our high-performance production team. This role is key to producing precision hydraulic fluid conveyance products that meet demanding industry standards. About the Role As a TIG Welder at Mid-State, you will work with carbon steel, stainless steel, and aluminum tubing and end connections. Our products are engineered for high-pressure applications, requiring precision workmanship and a strong focus on quality. Key Responsibilities: Perform TIG welding on carbon steel, stainless steel, and aluminum components. Set up and operate Miller welding equipment for production needs. Execute silver brazing and related preparatory/finishing processes (including cleaning and braze scale removal). Fabricate and repair parts as needed to support production. Maintain quality and safety standards in line with ISO 9001 requirements. Qualifications: Proven experience in TIG welding with strong technical skills. Ability to set up and adjust TIG welding equipment for optimal performance. Knowledge of silver brazing techniques and post-braze cleaning preferred. Quality-focused mindset with attention to detail. Ability to work independently and as part of a team. Why Join Mid-State Sales? Competitive pay based on experience. MondayFriday daylight scheduleno nights or weekends. Steady, full-time work in a clean, organized facility. Opportunities for growth within a stable, established company. If youre a skilled TIG welder looking for a steady schedule, clean work environment, and a company that values quality craftsmanship, we want to hear from you! Apply today to join the Mid-State Sales team.

The Welder is primarily responsible for performing high-quality fabrication and repair of critical machine components and structural supports, specializing in TIG and MIG welding of stainless steel, carbon steel, and aluminum, as specified by engineering blueprints and complex welding symbols. This role requires meticulous attention to detail during the cutting, grinding, fitting, and joining processes, ensuring all finished welds meet stringent dimensional tolerances and quality standards necessary for high-precision glove manufacturing machinery. Furthermore, the Welder is expected to maintain and safely operate all welding and fabrication equipment while adhering strictly to all company safety protocols and contributing to a clean, organized work environment. Qualifications Education/Certification: High School Diploma or equivalent (GED). Current or previous Welding Certification (e.g., AWS D1.1, D1.2, or similar relevant certification). Experience: Proven experience welding thin-gauge stainless steel is a major asset, given the cleanroom requirements of medical/glove machinery. Skills: Proficiency in TIG and MIG welding. Ability to read and comprehend complex engineering drawings, schematics, and Bill of Materials (BOMs). Strong mathematical and analytical skills for measuring and calculating dimensions. Physical ability to lift up to 50 lbs, stand for extended periods, and work in various positions.

$2,500 Sign-On Bonus Purpose of Position: WELD TEST REQUIRED The Welder is responsible for welding mild carbon steel and structural steel using gas metal arc welding (GMAW/MIG) and flux cored arc welding (FCAW) methods. The role requires the ability to work in various welding positions and produce high-quality welds. The ideal candidate will have a solid foundation in welding techniques, attention to detail, and the ability to work independently. Essential Functions/Responsibilities: Perform welding on mild carbon steel and structural steel using GMAW (MIG) and FCAW methods. Must be capable of welding in flat, horizontal, and vertical positions and creating fillet or butt weld joints. Utilize basic welding equipment and hand tools such as grinders, cut-off wheels, and magnetic drills. Conduct equipment checks to ensure optimal performance. Accurately read and interpret measurements using a tape measure. (test will be required) Ability to follow detailed blueprints and work instructions to complete welding projects as per specifications. Follow all safety protocols and procedures to ensure a safe working environment for yourself and others. Adhere to all workplace safety standards. Successfully complete required welding tests to demonstrate skills and meet job qualifications. Be willing to assist with other related tasks in different departments as needed. Lift and maneuver metal components, ensuring safe and efficient handling of materials (up to 50 lbs minimum). Education: High School Diploma/GED (not required but preferred) Completion of a welding trade school program (not required but preferred) Minimum Education High School Minimum Years of Experience 0-2 Specific Qualifications Additional Requirements: The minimum age requirement is 18 years. 1 + year of on-the-job related experience welding using GMAW or FCAW welding methods. Flexibility to work in other related departments as required. Ability to work both independently and in a team. Stand and/or walk most shifts, plus ability to bend, squat, lift (up to fifty pounds), push, pull, reach with or without reasonable accommodation. Demonstrated exemplary attendance and work habits. Effective communication skills Pass background check and drug test Demonstrate ability to accurately read and interpret a tape measure (test will be required) The weld test consists of two parts: Written Welding Knowledge Test - Assesses understanding of welding principles and best practices. Physical Weld Test - Hands-on evaluation of welding skills. 5-Gallon Weld Test Tank Requirements Material: Constructed from 10-gauge steel with a ¼" top sheet. Welding Method: MIG welding (GMAW) using . 035 hard wire. Weld Quality: Welds must be fully sealed, visually appealing, and consistent. Leak Test: The tank is pressurized to 3 PSI and tested with soap and water for leaks. Pass/Fail Criteria: A maximum of 5 leaks is allowed; exceeding this results in failure. Time Limit: The welding test must be completed within 1 hour. Pay Rate: Based on experience Job Locations US-OH-Batavia Company Overview Why IES Infrastructure? IES Infrastructure offers competitive salaries. But, if you make your employment decision based on salary only, you're overlooking other significant factors - work environment and employee benefits. We offer a friendly, team-work environment with opportunities for continuous development and career advancement. We also offer a comprehensive benefits package that provides real protection for you and your family. Health & dental insurance Group life & accidental death & dismemberment insurance Supplemental life insurance Voluntary accident insurance Company Paid Disability insurance (short and long-term) Vacation and holidays 401k Company Culture Commitment to Excellence - Consistently exceeds expectations. Honesty and Integrity - Strive to do what is right and do what we say we will do. Safety - Create a safe working environment in all operating locations. Respect -Honor the rights of all involved. Communication - Communicate clearly and directly with all involved. Employee Satisfaction - Create employee opportunities for growth and development. Innovation and Creativity - Apply creative ingenuity to make us better, faster, and first. Resiliency - No obstacle will stop us from accomplishing our goals. Teamwork - Above all else, work together as one team and one group of professionals. All positions require customer focus with a service-oriented attitude as well as attention to detail with excellent verbal and written communication skills. Ability to adapt to changes in daily activities is essential. Ability to travel and work overtime/weekends, as needed, to meet customer and in-house demands. All applicants must pass a background check and drug/alcohol screening and must have a clean driving record. EEO Statement PLEASE NO AGENCY CALLS. NOTE TO ALL AGENCIES: Any unsolicited agency resumes or agency represented candidates that are presented to any IES employee without first having a signed contract between that agency and the IES Talent Acquisition organization will become the property of IES and no fees will be paid. EEO & Affirmative Action The IES policy on equal employment opportunity prohibits discrimination based on race, color, religion, national origin, sex, age, gender identity, sexual orientation, individuals with disabilities, protected veterans, or any other protected status or characteristic. This policy applies to recruiting, hiring, transfers, promotions, terminations, compensation, benefits, and all other terms and conditions of employment, and also states that retaliation against any employee who files a complaint regarding possible violations of this policy will not be tolerated. IES is also committed to taking affirmative steps to promote the employment of minorities, women, individuals with disabilities, and protected veterans. IES develops affirmative action programs to support its commitment to equal employment opportunity, consistent with company policy and the company's obligations as a contractor to the United States government. View Your Equal Employment Opportunity rights under the law. "EEO is the Law" poster | "EEO is the Law" poster supplement View IES' policy on Pay Transparency Pay Transparency NonDiscrimination Poster Disability Accommodation IES is an Equal Opportunity/Affirmative Action Employer. IES provides reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Era Veterans' Readjustment Assistance Act of 1974 and Title I of the Americans with Disabilities Act of 1990. Applicants who need accommodation in the job application process should contact the IES corporate office at ************** or any IES office to request assistance. Right to Work English Spanish$2,500 Sign-On Bonus Purpose of Position: WELD TEST REQUIRED The Welder is responsible for welding mild carbon steel and structural steel using gas metal arc welding (GMAW/MIG) and flux cored arc welding (FCAW) methods. The role requires the ability to work in various welding positions and produce high-quality welds. The ideal candidate will have a solid foundation in welding techniques, attention to detail, and the ability to work independently. Essential Functions/Responsibilities: Perform welding on mild carbon steel and structural steel using GMAW (MIG) and FCAW methods. Must be capable of welding in flat, horizontal, and vertical positions and creating fillet or butt weld joints. Utilize basic welding equipment and hand tools such as grinders, cut-off wheels, and magnetic drills. Conduct equipment checks to ensure optimal performance. Accurately read and interpret measurements using a tape measure. (test will be required) Ability to follow detailed blueprints and work instructions to complete welding projects as per specifications. Follow all safety protocols and procedures to ensure a safe working environment for yourself and others. Adhere to all workplace safety standards. Successfully complete required welding tests to demonstrate skills and meet job qualifications. Be willing to assist with other related tasks in different departments as needed. Lift and maneuver metal components, ensuring safe and efficient handling of materials (up to 50 lbs minimum). Education: High School Diploma/GED (not required but preferred) Completion of a welding trade school program (not required but preferred)

Full-time Description Build some of the most unique and interesting products in the world. Our fabricators excel at stainless steel build strategies allowing us to fabricate to very tight tolerances. Our reputation for quality and our unique capabilities allow us to serve customers from across the world. Recommended Areas of Knowledge and/or Skill Understanding of heat input and distortion control Ability to problem solve and develop smart build strategies with little outside input GTAW (TIG) and GMAW (MIG) welding on various materials Weld inspection and proper defect repair Responsibility Read and understand customer drawings, weld symbols, and tolerances Hold linear dimensions, squareness, and flatness within tolerances Produce welds of the correct size and shape with few defects What We Offer Join our team of 50 welders building unique products every day! Huge project variety - hard to get bored. Diverse customers rarely slow down at the same time. Long term employment with history of steady growth Overtime Pay Flexible work schedules after introductory period The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Ability to lift 50 lbs. when required. While performing the duties of the job, the employee is regularly required to stand, walk, climb ladders and reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and ability to adjust focus. Requirements High School Diploma or equivalent Previous experience working as a MIG and/or TIG welder preferred Proficient with welding in all positions preferred Proficient with various types of material, ex: stainless steel, carbon steel, and aluminum Proficient with various metal thicknesses, ranging from 30ga to more than 1” thick plate Willingness to learn and develop welding and fabrication skills Ability to read/learn to read and interpret blueprints Ability to interpret/learn to interpret 3D CAD drawings Strong attention to detail and high quality standards Self- motivated and able to work both independently and within a collaborative team environment At Northern Manufacturing Co., we're committed to building a safe, inclusive, and high-performing workplace. As part of our hiring process, all final candidates are required to complete a pre-employment background check and drug screening. These checks may include verification of employment and education history, criminal records, and other job-related information. Background checks are conducted in accordance with applicable laws, including the Fair Credit Reporting Act (FCRA), and only with the candidate's written consent. Northern Manufacturing Co. is an Equal Opportunity Employer. We value diversity and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law. This policy is in accordance with Federal Acquisition Regulation 52.222-26 - Equal Opportunity. We appreciate your interest in joining our team and look forward to learning more about you!

WELDER/FITTERPosition Shift: 7:00am-3:30pm, Monday-FridayPosition Salary: $28.00-$29.00/hour PRIMARY PURPOSEThe welder-fitter will need to have manual dexterity and the ability to use hand and power tools asneeded. Various welding equipment will be used, such as Flux core, MIG, TIG, stick welders, air arc machineand cutting torches. Must be able to read engineering sketches and drawings, understand weldingsymbols. MAJOR RESPONSIBILITIES AND FUNCTIONS Layout, positions, and secures parts and assemblies according to specifications. Determines required equipment, welding method and welding techniques. Develops templates and other work aids to hold and align parts. Ignites torch and adjusts valves, amperage, or voltage to obtain desired flame or arc. Tack-welds or welds components and assemblies. Heats, forms, and dresses metal parts, using hand tools, torch, or arc welding equipment. Welds components in flat, vertical, or overhead positions. Removes rough spots from work piece, using portable grinder, hand file, or scraper. Inspects grooves, angles, or gap allowances, using micrometer, caliper, and precision measuring instruments. Follow blueprints to arrange metal pieces and temporarily fix them into position before welding. Keep work area clean and organized. Make recommendations for process improvements. Perform equipment inspections prior to use. Report equipment malfunctions or safety concerns to the Plant and/or Maintenance Manager. Work accordingly to meet Safety and Quality goals. Work with team to balance workload to meet On Time Delivery goals. Manage company resources to ensure budgetary integrity and client satisfaction. Deburr and grind metal as necessary to achieve proper surface texture. Maintain professionalism in speech and action at all times. Required to follow all company policies. Other tasks/duties as assigned by Management. MINIMUM REQUIRED QUALIFICATIONS Knowledge of welding techniques, tools and equipment. Must be detail oriented, self-motivated and disciplined with the ability to multi-task. Demonstrated mechanical aptitude. Able to read and interpret blueprints. PREFERRED QUALIFICATIONS Knowledge of welding techniques in the following areas: oxygen-acetylene, electric arc, MIG and TIG and other types of weld based on project needs. Knowledge regarding proper fillers for weld jobs. Highly skilled in the use of MIG, FCAW & TIG welding processes on a variety of Stainless Steel, Carbon Steel, and Aluminum components and is able to pass certification tests to ASME and AWS codes. Possess a working knowledge of all applicable manufacturers and industry standards (CMAA, HMI, ANSI, and OSHA). Strong analytical, conceptual and planning skills. Excellent math skills and overall PC literacy (Microsoft Office). #IES1

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. The Welder III position will be responsible for performing high-mix/low-volume manual TIG welding of Stainless Steel and Aluminum in a high-quality medical device manufacturing environment What You'll do as a Welder III * Set-up and operate TIG welding equipment using prescribed methods and procedures to weld parts within acceptable tolerances and standards. * Build weldments through manual layout and manual surface prep processes when required. * Read and interpret welding blueprints including standard welding symbols, travelers, and other work instruction documents. * Positions parts to be joined using fixtures and other holding or positioning devices. * Use required measuring instruments and gages to check and ensure parts meet dimensional requirements. * Assist in problem solving activities. * Complies with all quality standards. * Capable of mentor and training Welder I and Welder II. * Capable of fitting, purging, and welding complete joint penetration (CJP) welds. * Ability to perform troubleshooting of welding equipment, materials, and fixturing. * Capable of performing visual welding inspections. * Ability to interpret AWS standards and welding symbols. * Ability to produce all product lines within the designated area. The Experience, Skills and Abilities Needed Required: * High School Diploma or GED * 3-5 years of Welding experience. * 2 years of experience working in a solid metal fabrication/machining environment required. Preferred: * Welding experience in flux core, TIG, stick, and carbon steel preferred. * Certification in GTAW (TIG) is considered a plus. Other: * Must be able to use prescribed manual processes in TIG welding of stainless steel, mild steel, and aluminum. * Must be able to read and interpret welding blueprints, including all standard welding symbols. * Must be able to use precision measuring instruments and gauges. * Must have strong math and troubleshooting proficiency and basic computer skills. * Must have basic welding inspection knowledge and conduct visual inspection. Pay rate for this opportunity is $27.00. This position is eligible for bonus participation. Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits Open until position is filled. STERIS is a leading global provider of products and services that support patient care with an emphasis on infection prevention. WE HELP OUR CUSTOMERS CREATE A HEALTHIER AND SAFER WORLD by providing innovative healthcare and life sciences products and services around the globe. For more information, visit *************** If you need assistance completing the application process, please call ****************. This contact information is for accommodation inquiries only and cannot be used to check application status. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity. The full affirmative action program, absent the data metrics required by § 60-741.44(k), shall be available to all employees and applicants for employment for inspection upon request. The program may be obtained at your location's HR Office during normal business hours.