Jobs that use jigs the most include aircraft structure mechanic, fixture builder, and tool inspector.
| Rank | Job title | Salary | % of all skills | Job openings |
|---|---|---|---|---|
| 1 | Aircraft Structure Mechanic | $62,809 | 21% | 36,380 |
| 2 | Fixture Builder | $53,904 | 20% | 3,041 |
| 3 | Tool Inspector | $49,213 | 18% | 24,549 |
| 4 | Drill Press Operator | $35,232 | 16% | 44,485 |
| 5 | Tool Builder | $44,285 | 16% | 10,843 |
| 6 | Tool Machinist | $56,038 | 15% | 17,005 |
| 7 | Tool And Die Designer | $45,993 | 14% | 52,308 |
| 8 | Tool Room Machinist | $45,143 | 12% | 41,699 |
| 9 | Die Maker | $50,035 | 12% | 7,600 |
| 10 | Tool Maker | $52,443 | 12% | 18,166 |
What jobs use Jigs the most?
1. Aircraft Structure Mechanic
How aircraft structure mechanic uses Jigs:
- Manage QA programs to include aircraft turn-up and monitoring and FOD prevention
- Work from SRM, TRM, AMM, EO and various other aircraft documentation to accomplish repair objectives.
- Work as an aircraft mechanic in the USAF.
Most common skills for aircraft structure mechanic:
- Calipers
- Jigs
- Stabilizers
- Hand Tools
- Engineering Drawings
- Airframe
2. Fixture Builder
How fixture builder uses Jigs:
- Fabricate from raw materials, complex master gauges, drill jigs & holding fixtures for assembly processes.
- Coordinate master tooling gauges and relate tooling.
- Construct new and maintain fixtures for CNC machining production.
Most common skills for fixture builder:
- Build Fixtures
- Jigs
- Gauges
- Blueprint Specifications
- CNC
- Engineering Drawings
3. Tool Inspector
How tool inspector uses Jigs:
- Inspect parts using height gauges, travel gauges, indicators, calipers, and comparators.
- Read and interpret engineering drawings and inspection procedures in accordance with API.
- Perform close tolerance inspection of support tooling including drill jigs, gages and templates.
Most common skills for tool inspector:
- Jigs
- Hand Tools
- Micrometers
- CMM
- Calipers
- Coordinate Measuring Machine
4. Drill Press Operator
How drill press operator uses Jigs:
- Certify machine operator for Amada press break of stainless steel
- General mig welding for any project that is needed.
- Drill and tap aerospace parts such as steel and aluminum structures.
Most common skills for drill press operator:
- Blueprint Specifications
- Jigs
- Tape Measure
- CNC Machines
- Safety Practices
- Drill Holes
5. Tool Builder
How tool builder uses Jigs:
- Contract machinist Fanuc lathes machining large turbines for use in power generation for Mitsubishi-Hitachi in Savannah Ga.
- Fabricate composite and aluminum full validating fixtures for interior and exterior vehicle build.
Most common skills for tool builder:
- Jigs
- Hand Tools
- Calipers
- Grinders
- Aerospace
- Machine Shop
6. Tool Machinist
How tool machinist uses Jigs:
- Use of precision tools, calipers, micrometers, and dial indicators to ensure machine tolerances meet require specifications.
- Operate lathes, vertical and horizontal mills, surface grinders, shapers, drill presses, and various cutting equipment.
- Experience with boring mills, Blanchard grinders, lathes, and surface grinders.
Most common skills for tool machinist:
- CNC
- Jigs
- Hand Tools
- Grinders
- Calipers
- Drill Presses
7. Tool And Die Designer
How tool and die designer uses Jigs:
- Operate drill press, CNC, metal saws, grinding wheels and learned many valuable shop skills.
- Utilize Solidworks for prototype development, parts and manufacturing.
- Create BOM for die checker, purchase and die building.
Most common skills for tool and die designer:
- Jigs
- Machine Tools
- Hand Tools
- CNC
- Solidworks
- Grinders
8. Tool Room Machinist
How tool room machinist uses Jigs:
- Fabricate gauges, jigs, fixtures, extrusion dies, and various types of cut die components.
- Design and construct drill jigs, bending fixtures, welding jigs and components for a wide variety of government contracts
- Work closely with customers to determine job requirements, troubleshoot equipment problems and answer customer questions.
Most common skills for tool room machinist:
- Jigs
- Grinders
- Hand Tools
- Calipers
- Micrometers
- Machine Tools
9. Die Maker
How die maker uses Jigs:
- Operate manual lathes, large and small boring mills, drill presses, CNC machines.
- Operate and set-up machines such as drill press, lathe, milling machines and surface grinders, etc.
- Operate forklifts and overhead cranes.
Most common skills for die maker:
- Hand Tools
- Grinders
- Jigs
- CNC
- Machine Tools
- CAD
10. Tool Maker
How tool maker uses Jigs:
- Programme setup and run cnc lathe).
- Weld parts to customer prints with both MIG and TIG welders.
- Used cad to machine parts to spec, construct assemblies, and fixtures.
Most common skills for tool maker:
- Grinders
- Jigs
- Hand Tools
- Machine Tools
- Calipers
- CNC Machines
11. Journeyman Welder
How journeyman welder uses Jigs:
- Skil in air arc metal cutting, oxyacetylene torch cutting, plasma arc metal cutting, GMAW, SMAW, FCAW.
- Apply welding methods with the use of SMAW, FCAW and GMAW.
- Pre-Fab free-hand TIG weld 1/16th inch stainless steel Schott tubes.
Most common skills for journeyman welder:
- MIG
- Brazing
- Jigs
- Flux Core
- Overhead Positions
- TIG
12. Aircraft Assembler
How aircraft assembler uses Jigs:
- Work from SRM, TRM, AMM, EO and various other aircraft documentation to accomplish repair objectives.
- Save the USAF $11K in CDO contractor fees.
- Install aircraft skin, frame work, plumbing, and wiring.
Most common skills for aircraft assembler:
- Hand Tools
- Jigs
- Engineering Drawings
- Calipers
- FOD
- Pneumatic Tools
13. Die Sinker Apprentice
How die sinker apprentice uses Jigs:
- Operate MIG, TIG, and arc welders.
- Certify MIG welder; TIG welder on stainless steel, harden steel (e.g.
- Experience using large ceiling hoists and a trial press for test parts runs.
Most common skills for die sinker apprentice:
- Grinders
- Hand Tools
- Manual Lathes
- Jigs
- Drill Presses
- Machine Tools
14. Tool And Die Maker
How tool and die maker uses Jigs:
- Perform proficient & frequent weld repair work using both MIG and TIG welding.
- Generate complex programs utilizing cad- cam software for unattend operation of precise CNC FANUC wire EDM machines.
- Smooth and polish flat and contour surfaces of parts or tools, using files, emery cloths, or power grinders.
Most common skills for tool and die maker:
- CNC
- Grinders
- Jigs
- Hand Tools
- Machine Tools
- Calipers
15. Tool Designer
How tool designer uses Jigs:
- Manage customer contacts, lead, design, sketch and model Saab environmental test fixtures using Unigraphics V18.
- Tune and correct extrusion tools to achieve dimensional tolerances, finish and function of products to internal and external customer specifications.
- Used drill press, surface grinders, vertical mills, lathes, & NC control mills.
Most common skills for tool designer:
- Jigs
- Assembly Fixtures
- Aerospace
- CNC
- NX
- GD
16. Manufacturing Labour
How manufacturing labour uses Jigs:
- Manage mulching, fertilizing, watering and mowing activities.
- Operate CNC lathe machine and drill press.
- Prepare groceries for stores across Springfield and Joplin by building pallets for shipment in a timely and organize manner
Most common skills for manufacturing labour:
- Hand Tools
- Tape Measure
- Pallets
- Jigs
- Quality Checks
- Basic Math
17. Structures Mechanic
How structures mechanic uses Jigs:
- Effect honeycomb and composite repairs on regional aircraft nose cones per manufacturer SRM and AMM.
- Operate air tools, rivet guns, sanders, angle grinders, and other miscellaneous tools require.
- Work with materials such as graphite, fiberglass and corefil.
Most common skills for structures mechanic:
- Safety Regulations
- Jigs
- Ladders
- Math
- Structural Repairs
- Operation Sheets
18. Tool And Die Machinist
How tool and die machinist uses Jigs:
- Operate milling machines, grinders, screw machines, CNC's, drill press, hydraulic press.
- Use MIG welder when need.
- Lift and position workpieces with hoists.
Most common skills for tool and die machinist:
- Grinders
- Hand Tools
- Jigs
- Troubleshoot
- Manual Lathes
- CNC Machines
19. MIG Welder
How mig welder uses Jigs:
- Manage and run production parts through the brake.
- Read and interpret blue prints weld steel and aluminum using GMAW process
- Develop extensive experience in a wide variety of welding styles and positions including MIG, and TIG.
Most common skills for mig welder:
- Tape Measure
- Arc Welding
- Jigs
- GMAW
- Torches
- Aluminum
20. Tool Design Engineer
How tool design engineer uses Jigs:
- Manage automation projects including purchasing, scheduling fabrication and assembly, debugging, and delivery to customer.
- Design, document and procure prototype and production ready tooling using AutoCad, ProE and SolidWorks.
- Draft and revise new and current drawings using computer aid programs such as AutoCAD and SolidWorks.
Most common skills for tool design engineer:
- Solidworks
- Jigs
- GD
- Engineering Drawings
- Aerospace
- NX
Other skills
- JQuery career
- JR career
- JV career
- Java career
- JavaScript career
- Jenkins career
- Jigs career
- Jira career
- Journal Entries career
- Juniper career
Updated December 28, 2023