Software engineering internship jobs in Mississippi - 366 jobs

Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Overview Help Accepting applications Open & closing dates 12/22/2025 to 12/21/2026 Salary $76,463 to - $164,301 per year Pay scale & grade GS 12 - 15 Locations Few vacancies in the following locations: Eielson AFB, AK Elmendorf AFB, AK Fort Richardson, AK Maxwell AFB, AL Show morefewer locations (79) Little Rock AFB, AR Davis Monthan AFB, AZ Luke AFB, AZ Beale AFB, CA Edwards AFB, CA El Segundo, CA Los Angeles, CA March AFB, CA Travis AFB, CA Vandenberg AFB, CA Air Force Academy, CO Buckley AFB, CO Cheyenne Mountain AFB, CO Colorado Springs, CO Peterson AFB, CO Schriever AFB, CO Joint Base Anacostia-Bolling, DC Dover AFB, DE Cape Canaveral, FL Cape Canaveral AFS, FL Eglin AFB, FL Homestead AFB, FL Hurlburt Field, FL MacDill AFB, FL Patrick AFB, FL Tyndall AFB, FL Dobbins AFB, GA Moody AFB, GA Robins AFB, GA Hickam AFB, HI Mountain Home AFB, ID Scott AFB, IL Grissom AFB, IN Barksdale AFB, LA Hanscom AFB, MA Westover Air Reserve Base, MA Andrews AFB, MD Linthicum Heights, MD Selfridge ANG Base, MI Whiteman AFB, MO Columbus AFB, MS Keesler AFB, MS Malmstrom AFB, MT Grand Forks, ND Minot AFB, ND Offutt AFB, NE New Boston, NH McGuire AFB, NJ Cannon AFB, NM Holloman AFB, NM Kirtland AFB, NM Nellis AFB, NV Niagara Falls, NY Wright-Patterson AFB, OH Youngstown, OH Youngstown, OH Altus AFB, OK Tinker AFB, OK Vance AFB, OK Charleston, SC Shaw AFB, SC Arnold AFB, TN Dyess AFB, TX Fort Sam Houston, TX Goodfellow AFB, TX Kelly AFB, TX Lackland AFB, TX Laughlin AFB, TX Randolph AFB, TX Hill AFB, UT Alexandria, VA Arlington, VA Dahlgren, VA Fort Eustis, VA Langley AFB, VA Pentagon, Arlington, VA Fairchild AFB, WA McChord AFB, WA Warren AFB, WY Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Multiple Work schedule Full-time Service Competitive Promotion potential 15 Job family (Series) * 0854 Computer Engineering Supervisory status No Security clearance Secret Drug test No Position sensitivity and risk Noncritical-Sensitive (NCS)/Moderate Risk Trust determination process * Suitability/Fitness Financial disclosure No Bargaining unit status No Announcement number AFPCDHA-12857039-0854-CYBER Control number 852985200 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Clarification from the agency This public notice is to gather applications that may or may not result in a referral or selection. Duties Help * Duties and responsibilities vary and may increase according to grade level * Provide computer system management support. * Help coordinate the planning and implementation of hardware and software upgrades, follow and enforce proper security procedures, oversee user accounts and ensure smooth and predictable data flow. * Test and determine the performance and applicability of data processing equipment and techniques and prepare written reports on these findings. Requirements Help Conditions of employment * Please read this Public Notice in its entirety prior to submitting your application for consideration. * U.S. Citizenship is required * Males must be registered for Selective Service, see *********** * Total salary varies depending on location of position * If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: ***************************************** * Recruitment incentives may be authorized * Position may be subject to random drug testing * Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays * Shift work and emergency overtime may be required * Employee must maintain current certifications * A security clearance may be required * Disclosure of Political Appointments * Full/part-time employees occupying direct childcare positions are eligible for discounts IAW DAF AFSVC/CC Memo, 30 Sep 22; first child 100% / each additional child 25%. Other assigned CYP and FCC personnel are eligible for 25% discount. Qualifications In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Group Coverage Qualification Standard for Professional and Scientific Positions. BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: A. Degree: Professional Engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional Registration: Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. OR 2. Written Test: Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico. OR 3. Specified Academic Courses: Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum. OR 4. Related Curriculum: Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: GS-12: One year of specialized experience equivalent to the GS-11. Examples of specialized experience include management and directing of assigned IT systems and programs for complex programs and/or projects. GS-13: One year of specialized experience equivalent to the GS-12. Examples of specialized experience include identifying, preparing and presenting detailed technical reports and briefings on new concepts and technical directions impacting programs/projects, and defining future technology requirements. GS-14: One year of specialized experience equivalent to the GS-13. Examples of specialized experience include planning, organizing, and managing branch level activities and developing goals and objectives that integrate organization and objectives for computer engineering programs. GS-15: One year of specialized experience equivalent to the GS-14. Examples of specialized experience include providing technical leadership, advice, and assistance on complex, controversial or precedent setting matters and dealing tactfully and effectively with high level officials, engineers and scientists. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): * Knowledge of computer engineering policies, theories, principles and concepts, and familiarity with other engineering disciplines. * Knowledge of automated data processing concepts, systems capabilities, and measurements processes to effectively accomplish assigned functions. * Ability to analyze, evaluate, and applies rules, regulations, and procedures in a variety of situations. * Ability to plan and organize work and coordinate with other engineering disciplines; communicate effectively, both orally and in writing; and maintain good working relations. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience; transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation. FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying. Additional information For Direct Hire (DHA) Positions: This is a Direct Hire Public Notice, under this recruitment procedure applications will be accepted for each location/ installation identified in this Public Notice and selections are made for vacancies as they occur. There may or may not be actual/projected vacancies at the time you submit your application. Interagency Career Transition Assistance Program (ICTAP): For information on

Internship - Heavy Civil ConstructionAbout Us Gregory Construction is a Christian-principled, award-winning provider of heavy civil construction services, recognized for excellence across the industry. Guided by our values of safety, integrity, and continuous improvement, we take pride in building critical infrastructure that strengthens our communities. Our culture fosters teamwork, accountability, and professional growth in everything we do. Position Overview We're looking for motivated students pursuing a construction-related degree to join our team as Construction Interns in our Columbus, MS office. This is a paid internship with flexible timing - no fixed start date or specific term requirement. Whether you're exploring the field or preparing for graduation, this opportunity offers hands-on learning in a real-world construction environment. As a Gregory Construction intern, you'll be an active contributor, gaining valuable experience in both field and office settings while supporting our project management, estimating, and construction operations teams. What You'll Gain During your internship, you'll have the opportunity to: Gain exposure to heavy civil projects, including earthwork, utilities, concrete structures, and roadway construction Learn how project schedules are developed, tracked, and managed Participate in field operations with an emphasis on safety and quality Collaborate with project managers, engineers, and superintendents to solve real-world challenges Build a strong foundation in industry best practices and Gregory's approach to project delivery Our goal is to give you a meaningful, hands-on experience that prepares you for a career in the construction industry. Who We're Looking For Students currently enrolled in a construction-related degree program, such as Construction Management, Civil Engineering, Building Science, Industrial Technology, or similar fields Previous internship experience is a plus, but not required What We Expect A willingness to learn and take initiative Reliability and professionalism in daily responsibilities A strong commitment to safety and teamwork Clear, professional communication in both office and field settings Job Type: Paid Internship Location: Columbus, MS

Your Job Georgia-Pacific (GP) is seeking Safety Interns to join our teams this upcoming Summer 2026 at one of our many nationwide locations. The Georgia-Pacific Safety Internship Program is a 12-week summer program designed to provide meaningful real-work experience. Our interns will gain exposure to products that GP manufactures, as well as the diverse safety functions and responsibilities that a Safety Leader has at a manufacturing location. Planned career networking events and focused mentoring prepare our interns for a career within the Georgia-Pacific safety team. Georgia-Pacific, a Koch company, is one of the world's leading manufacturers and marketers of building products, tissue, packaging, paper, cellulose, and related chemicals. The company employs more than 30,000 people at approximately 300 locations in North and South America. Georgia-Pacific creates long-term value by using resources efficiently to provide innovative products and solutions that meet the needs of customers and society, while operating in a manner that is environmentally and socially responsible and economically sound. Our Team We believe that everyone should be an entrepreneur no matter what role they are in. As an intern, co-op, or full-time hire, there are countless opportunities for you to be challenged, have your voice heard, and gain real experience within our companies. Sound exciting? Do you want to be a part of meaningful work? Kickstart your career with us by applying today! Our full-time opportunities are in-person nationwide! Responsibilities may include work in the following areas: Occupational safety Occupational health Industrial hygiene Fire safety / hazardous materials Process Safety Environmental safety Emergency preparedness Construction safety What You Will Do While participating in the summer internship program, you will: Interact with experienced EH&S professionals who will help you connect your classroom learnings to a real-world manufacturing site Streamline safety processes and procedures Participate in incident investigations, chemical monitoring, or safety inspections Gain experience in safe work practices, emergency response, and support our vision of injury-free operations Understand, develop, and apply Principle Based Management™. At Koch, interns gain real-world, hands-on experience, with the opportunity to tackle significant projects, solve problems, and take ownership of their work. Alongside your day-to-day role, the Koch Intern Program offers an opportunity to learn more about Koch, our people, Principle Based Management, and the local community you will be working in, all while growing your network. Through weekly learning sessions, location-specific programming, and professional development, we aim to help every individual grow and learn how they can best contribute. This 12-week program will allow you to experience Life at Koch , as you start your career and go anywhere within our network of companies. The locations available are below. Please note that availability of these locations may change throughout the recruiting season. When you submit your application, you will be asked to provide the location preference(s) that you are willing to consider an offer from: Albion, MI Batavia, NY Camas, WA Crossett, AR Darlington, SC Fletcher, OK Bowling Green, KY Cumberland City, TN Halsey, OR Hattiesburg, MS Mount Wolf, PA Port Hudson (Zachary), LA Sweetwater, TX Waxahachie, TX Wheatfield, IN West Chester, OH Who You Are (Basic Qualifications) Enrolled in a degree or alternative program. (e.g., 2-year technical college program, certificate program, upskilling program, etc.) Ability to relocate per program requirements Eligible for full-time employment on or before Summer 2027 Legal authorization to work permanently in the United States for any employer without requiring a visa transfer or visa sponsorship What Will Put You Ahead Analytical and organizational skills Able to work independently and manage multiple tasks Interpersonal communication and collaborative teamwork Effective oral and written communication skills Proficiency in Excel, Access and other Microsoft applications is preferred Ability to learn new software applications quickly Enrolled in an Occupational Safety and Health, Industrial Hygiene, Environmental Health, Environmental Safety Management, Emergency & Disaster Management, or related Engineering degree program For this role, we anticipate paying between $28- $30 per hour. This role is not eligible for VISA Sponsorship. At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Hiring Philosophy All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds. We are Military Ready and Second Chance employers. Learn more about our hiring philosophy here . Who We Are As a Koch company and a leading manufacturer of bath tissue, paper towels, paper-based packaging, cellulose, specialty fibers, building products and much more, Georgia-Pacific works to meet evolving needs of customers worldwide with quality products. In addition to the products we make, we operate one of the largest recycling businesses. Our more than 30,000 employees in over 150 locations are empowered to innovate every day - to make everyday products even better. At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company. Our Benefits Koch-company full-time interns/co-ops are eligible for a comprehensive medical plan that comes with prescription drug coverage and expert resources including second opinions and surgery support as well as weight and diabetes management. We focus on making healthcare resources available through advanced apps, from the comfort of home. With enrollment in the medical plan, you have access to a tax-free savings opportunity for healthcare expenses (Health Savings Account). You and all members of your household are automatically enrolled in the Employee Assistance Program (EAP) for professional mental health counseling, financial and legal consultations and concierge-level support for work-life balance like helping finding child, elder or pet care - at no cost to you. Equal Opportunities Equal Opportunity Employer, including disability and protected veteran status. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. Please visit the following website for additional information: *******************************

The Software Applications Developer is responsible for analyzing software needs, designing, creating, coding, and testing application software from multiple platforms to serve the needs of the Center for Cyber Innovation (CCI). This position works closely together with members of technical teams for programming and hardware support to research projects. Salary Grade: 16 Please see Staff Compensation Structure for salary ranges. Department Profile: The Center for Cyber Innovation (CCI) is part of the High Performance Computing Collaboratory at Mississippi State University. CCI develops solutions for Defense, Homeland Security and the Intelligence Community. The primary focus of the CCI is to research, prototype and deliver cutting-edge cyber solutions that support global national security, homeland security and peacekeeping operations. Essential Duties and Responsibilities: Lead a software applications development team to develop applications for CCI open-source intelligence research projects. This includes being fully involved with all technical activities within the development team (software development life cycle activities, code reviews, research, etc.). The software applications developer will perform the following: Collaborate with affiliated faculty members, other CCI staff, and research sponsors to determine exact needs and specifications and develop concepts and strategies for development of application software. Determine best software platform for individual programming problems (such as mobile device, web-based, systems software, etc.). Design, code, and test application software prototypes and interact with faculty, staff, and research sponsors to refine application software prototype into a final solution. Create fully documented technical specifications for all applications developed and provide preliminary guidance on software operation to (user) documentation writers. Provide status reports and updates of projects to project managers. Establish standards and best practices. Create software code libraries to be used across multiple applications and by other developers within the team. Constantly monitor completed and in-progress applications and provide software patches and updates to ensure all remain updated and secure. Minimum Qualifications: Bachelor's degree in Computer Science, Computer Engineering, or related field. 3 years experience in Programmer Analyst, Software Developer, Web Programmer, Web Application Developer, Computer Programmer, Student/Graduate student programmer or a member of a software development team, providing technical leadership / guidance / mentorship. Preferred Qualifications: MS or PhD degree. One or more years' experience developing mobile applications for iOS and Android platforms. Knowledge of Team Awareness Kit/Tactical Assault Kit (TAK) platform is a plus. Knowledge, Skills, and Abilities: The software applications developer will possess the following knowledge, skills, and abilities: Demonstrable experience designing enterprise software and defining software systems in at least one of the following areas: iOS Development, Android Development, PHP/web application development. A basic understanding of information systems, relational databases, object oriented programming, and backup and recovery procedures. Demonstrated proficiency in Python required, as well as one or more of the following languages: JAVA, Kotlin, C++, C#, PERL, PHP, PL/SQL, MySQL, Objective C, Xcode. Strong technical skills with SQL in a web setting. Ability to analyze data, solve problems, and prioritize and organize work to achieve stated goals. Excellent interpersonal and communication skills. Basic understanding of user interaction design skills. Ability to work independently and collaboratively. Ability to communicate design rationale and build consensus. Ability to prioritize and manage work to critical project timelines in a fast-paced environment. Ability to develop new approaches to complex design problems. Working Conditions and Physical Effort Work is normally performed in a typical interior/office work environment. No or very limited exposure to physical risk. No or very limited physical effort required. Instructions for Applying: Link to apply: *********************************** Apply online by submitting a cover letter, resume, and a copy of your transcript(s). Any social security numbers included on requested transcripts should be redacted prior to submitting online. We will accept applications only from persons with indefinite employment authorization in the U.S., and will not sponsor for nonimmigrant or immigrant status for this position. Restricted Clause: Position is contingent upon continued availability of funding. Equal Employment Opportunity Statement: Mississippi State University is an equal opportunity institution. Discrimination is prohibited in university employment, programs or activities based on race, color, ethnicity, sex, pregnancy, religion, national origin, disability, age, sexual orientation, genetic information, status as a U.S. veteran, or any other status to the extent protected by applicable law. Questions about equal opportunity programs or compliance should be directed to the Office of Civil Rights Compliance, 231 Famous Maroon Band Street, P.O. 6044, Mississippi State, MS 39762, **************. What do I do if I need an accommodation? In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Mississippi State University, please contact the Department of Human Resources Management at tel: ************** or *******************. If you have any questions regarding this policy, contact the Department of Human Resources Management at ************** or *******************. Upon request, sections of this job listing are available in large print, and readers are available to assist the visually impaired.

Are you looking for a great team environment? Southern Farm Bureau Casualty Insurance Company is currently seeking a Software Developer, Associate. Southern Farm Bureau is a great company and an excellent place to work. The Company offers a family-oriented work environment and a rich benefit package including paid time off, company matched 401(k), pension/retirement, medical, dental, vision, group life, accidental death and dismemberment, employee assistance program, a continued education program, and a hybrid home/office work schedule. The Software Developer, Associate will design, code, test and analyze software programs and applications. Research, design, document and modify software specifications throughout production lifecycle. Analyze and amend errors in a timely and accurate fashion. Successfully complete training program for Software Developer. Learn basic tools and techniques necessary to begin productive work. Complete simple program development and maintenance assignments. Prepare and/or update documentation according to department standards. Report regularly to Supervisor on training progress, training impressions and assigned work. After hours and weekend on-call may be required. Overtime hours may be required to meet project deadlines. Occasionally perform analysis and develop specifications on less complex projects. Test applications and features to ensure work is free from defects before sending to end users for final approval. Assist in providing technical support to various application systems; troubleshooting, analyzing issues and correcting problems. Work independently with little direct supervision

Sanhua is looking for a inventory control and logistics intern to join our team in our Gluckstadt, MS office. This person will work with other teams and identify process gaps and present efficiencies to local leadership. The ideal candidate has a customer-first mindset and aims to deliver high-quality service in a warehouse environment. Responsibilities: Support inventory team with general duties of planning, scheduling, and purchasing inventory. Collaborate with vendor management team in negotiations process to learn how to approach and resolve freight cost and rate issues. Assist and provide analysis to category management to influence vendor rate decisions Ensure accuracy in order processing Requirements: Bachelor's degree in Supply Chain, Logistics, Finance or relevant field 1-2 years proven experience in a warehouse environment preferred Excellent written and verbal communication skills Ability to address complaints and issues with effective solutions and a positive attitude Familiarity with Import and Export business Excellent time-management and prioritization skills ** Internships candidates must be local to Gluckstadt, MS and its vicinities.

Practice Town and Country Animal Hospital, which specializes in companion and exotic medicine, was founded on November 1st, 1989. Our office is located in Hattiesburg, a big city with a small-town feel. Many of our clients are our friends and neighbors. Position Purpose Come extern with us! Heartland Veterinary Partners' Vet Tech Externship Program works to provide externship support for veterinary technician students. Externship length & requirements are dependent upon your university. Requirements/Qualifications Eligibility Must be currently enrolled in an accredited Veterinary Technician School

Description & Requirements We are seeking a Federal OneStream (OS) Junior Developer to support our Internal Revenue Service (IRS) client. Essential Duties and Responsibilities: - Design, develop, and maintain web-based applications as a Front-End Web Developer. - Work closely with technical end users to develop resolution of software problems. Job-Specific Essential Duties and Responsibilities: -Participate in working sessions to develop detailed technical and functional design specifications. -Support documentation of functional design and technical approach. -Support configuration of OneStream budgeting application based on detailed requirements -Support functionality testing, reporting, and integration -Support User Acceptance Testing of OneStream tool -Support training for end-users including work step instructions. Job-Specific Minimum Requirements: - Bachelor's Degree (or equivalent additional experience) from an accredited college or university. - At least two (2) to five (5) years of related experience required. - Experience and knowledge in configuration of OneStream (OS) budgeting tool. - Experience with testing OneStream application. - Experience with Agile software development methodology and continuous integration. - Strong interpersonal, communication, and writing skills. Minimum Requirements - Bachelor's degree in relevant field of study and 3+ years of relevant professional experience required, or equivalent combination of education and experience. Job-Specific Preferred Skills: - Possess OneStream certification(s) - Experience configuring OneStream budgeting application in a federal environment - Experience with Budget Formulation, Budget Execution, and People Planning #techjobs #clearance #veterans Page #LI-Remote EEO Statement Maximus is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. Pay Transparency Maximus compensation is based on various factors including but not limited to job location, a candidate's education, training, experience, expected quality and quantity of work, required travel (if any), external market and internal value analysis including seniority and merit systems, as well as internal pay alignment. Annual salary is just one component of Maximus's total compensation package. Other rewards may include short- and long-term incentives as well as program-specific awards. Additionally, Maximus provides a variety of benefits to employees, including health insurance coverage, life and disability insurance, a retirement savings plan, paid holidays and paid time off. Compensation ranges may differ based on contract value but will be commensurate with job duties and relevant work experience. An applicant's salary history will not be used in determining compensation. Maximus will comply with regulatory minimum wage rates and exempt salary thresholds in all instances. Accommodations Maximus provides reasonable accommodations to individuals requiring assistance during any phase of the employment process due to a disability, medical condition, or physical or mental impairment. If you require assistance at any stage of the employment process-including accessing job postings, completing assessments, or participating in interviews,-please contact People Operations at **************************. Minimum Salary $ 95,000.00 Maximum Salary $ 105,000.00

ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. As a Grounds Systems Engineering Intern based at Rocket Lab's site in Stennis, Mississippi, you will have the opportunity to support the Test Ground Systems team in test operations for the Archimedes engine. The Ground Systems team is an integral part of the testing team, from designing and building new stands and capabilities, to making sure the stand continues to run smoothly day to day every day offers new challenges and opportunities to grow and contribute to the success of the mission. WHAT YOU'LL GET TO DO As an intern, you will work closely with your mentor and other employees within the department to apply your knowledge and grow your skills both technically and professionally Work with a fast-paced group of professionals to apply engineering and industry concepts to solve real challenges Attend frequent 1:1's with mentors and supervisors to facilitate success and learning while providing progress updates Enjoy tech talks and network with other interns and employees through social and professional events YOU'LL BRING THESE QUALIFICATIONS Ideal candidates will thrive in ambiguity and are excited to work in small, high-performing teams that are focused on continued learning and growth. Success in this position will be measured by the knowledge and experience you bring to the role, your ability to lead development projects without supervision, and your ability to successfully collaborate across teams to deliver results. Must be enrolled in a bachelor's, master's or doctorate degree program in an engineering discipline such as Electrical, Mechatronics or Robotics Engineering, or physics discipline and have at least one semester of school remaining post internship GPA of 3.0 or above 3+ months of applied engineering experience (internship, laboratory, and personal/team project experience is applicable) THESE QUALIFICATIONS WOULD BE NICE TO HAVE GPA of 3.5 or above 6+ months of applied engineering experience (internship, laboratory, and personal/team project experience is applicable) Experience with Soildworks Finite Element Analysis (FEA) experience Proficient in Computer-aided design and manufacturing (CAD/ CAM) Geometric Dimensioning & Tolerancing experience Experience working with pressurized systems Proficient knowledge of fluid dynamics ADDITIONAL REQUIREMENTS Able to work full-time, on-site for a minimum of 12 consecutive weeks beginning May or June 2026. COMPENSATION AND OTHER BENEFITS You may be eligible for a stipend to subsidize relocation costs WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at ***********************.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Impact Recruitment is seeking a qualified and innovative Civil Engineer at our clients Biloxi, Mississippi location to design, develop, and monitor construction of a large range of projects, primarily in the areas of Land Development and/or Municipal. Responsibilities: Independently design projects focused on site design, drainage, water, wastewater, detention/water, quality of various sizes including commercial, residential, and industrial Produce drawings using AutoCAD Civil 3D, ArcGIS, and Bluebeam Prepare technical reports to support design of projects as required by permitting agencies Must have knowledge of state and local development and permitting processes Work well as a member of a team of engineers, designers, and drafters Develop and enhance client relationships and earn repeat business Review and ensure quality designs are submitted to the clients Monitor progress and project status Manage project budgets Comply with guidelines and regulations including permits, safety etc. and deliver technical files and other technical documentation as required Requirements: Proven experience in civil engineering, preferably in land development and/or municipal Excellent knowledge of design and software such as AutoCAD Civil 3D, MS Office, HECRAS, Storm & Sanitary Analysis, Hydraulic Toolbox, and HY-8 Strong communication and interpersonal skills E.I.T. desired, PE License preferred BS/MS Degree in Engineering, with bias towards Civil Engineering Benefits: Salary commensurate with experience Employer paid health insurance 401k retirement plan with employer match Paid holidays Earned vacation time If you are looking to join an industry leader, reach out to our team to see why Impact Recruitment and our clients are attracting and retaining some of the best professionals in the industry! Impact Recruitment is an equal opportunity employer. Impact Recruitment does not discriminate in recruitment, hiring, or terms or conditions of employment on the basis of race, sex, color, national origin, sexual orientation, religion, age, disability, medical condition as defined under state law, or any other basis prohibited by applicable federal, state, or local law. Impact Recruitment also provides reasonable accommodations to disabled individuals to assist in the hiring process and to qualified individuals with disabilities in the performance of essential job functions, as required by federal, state, or local law.

Trilogy Communications Inc As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. A Summer Experience. A Lifetime of Value. We'll meet you where you are and help you go further. This summer, we're committed to bringing early-in-career talent together, trusting you to own your work and help you level up through professional development, networking, and exposure to real-world projects. We're doing things that matter. Our wire and cable power our world. Join us as an intern and we'll help you move up and around Marmon's 120+ companies as you grow your skills. Join the Biggest Small Business You'll Ever Find. Marmon Industrial Energy & Infrastructure (MIEI) works with six specialty wire, cable, and tubing solution manufacturing companies located throughout North America. We have over 100 years of innovative engineered solutions for critical, industrial, and commercial applications. As part of Marmon, you get the best of both worlds. The strength and stability that comes with being part of Berkshire Hathaway, plus the autonomy and opportunity that comes with working at one of our 120+ companies. What You'll Do: As an Engineering Intern, you will provide general assistance to the engineering team on projects related to communications systems, including both active electronics and passive components. You will analyze real-time or near real-time production data, assist with design issues related to coaxial cable and accessories, and conduct research to support engineering design activities. This internship offers an opportunity to gain hands-on experience with radio frequency (RF) communications systems and the components that constitute them, providing practical, applicable knowledge for your senior-year design projects. You will work closely with the engineering staff, contributing to real-world problem solving while enhancing your understanding of wireless theory as it applies to communications system design. Your work will support the engineering team's efforts, provide continuity within a small staff, and offer insight into the readiness and skills of recent graduates entering the workforce. What You'll Need: Currently pursuing a Bachelor's degree in Electrical Engineering or a related technical field Strong interest in active electronics, passive components, and wireless communications systems Basic engineering skills relevant to analysis, design, and research activities Strong analytical, problem-solving, and communication skills Ability to work independently and collaboratively in a team environment Entering Senior year or higher Compensation: $22-$27 per hour, commensurate with relevant experience and educational background Work Hours/Length of Program: The internship will run for 12 weeks from May to August Temporary Part/Full Time, targeting 40 hours per week Exact start and end dates are flexible based on school schedules and the needs of the business This is a paid internship Working Conditions and Physical Demands: This position is based in a general office and factory environment. Employees are required to follow safety guidelines, including wearing safety shoes and glasses when onsite. Regular walking, standing, and some sitting for extended periods May involve stooping, kneeling, or crouching Occasional lifting or moving items up to 50 pounds Ability to follow detailed written and verbal instructions and work safely around manufacturing equipment Successful completion of a drug screening and a physical exam are required for this role Location: Pearl, Mississippi - Onsite Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

Job DescriptionDescriptionJOB TITLE: SOFTWARE ENGINEER - INTEGRATIONS COMPANY OVERVIEWTherapy Management Corporation (TMC) strives to be the preferred therapy provider and employer in all communities we serve. We make a positive difference by delivering compassionate, superior care to all. Our passionate commitment to service excellence creates loyal customers and cultivates the best working environment for our TMC family. Our success is built on unwavering integrity, ethics, and an environment of innovation. CULTURE FITThe culture at TMC embraces those that demonstrate a deep passion for solving the problems of healthcare with enthusiasm for building positive working relationships and winning as a team. Creating a strong workplace culture has been one of our staples, which we believe encourages and inspires employees to do their best. We also embrace an “All In” mindset and give back to our communities through personal and company initiatives. Individuals in this role should embrace a mindset of continuous improvement and be prepared to have some fun along the way! Key ResponsibilitiesRESPONSIBILITIES· Develop software applications.· Engage with development team to analyze client needs and create solutions.· Develop software with a focus on usability, dependability, maintainability, and performance.· Participate in peer design reviews, code reviews, desk checks, performance testing, and functional testing with a focus on product quality.· Execute software deployments and post-deployment regression testing.· Contribute to our internal collaborative documentation and customer-facing documentation.· Directly support internal and external clients as needed.· Stay current with software industry trends, tools, technologies, and best-practices, and incorporate them into your work. Skills, Knowledge and ExpertiseREQUIRED QUALIFICATIONS· Bachelor's degree or higher in Computer Science or related field, or equivalent work experience.· 3+ years of prior .NET business application development.· Demonstrated experience with technologies common to the .NET development stack, including:o .NET Framework, .NET Core/Standardo API developmento SQL and NoSQL/Document databaseso XUnit and Moq testing frameworkso Azure· Experience with one or more of the following programming languages:o C#, VB.NET, C++· Experience in Scrum or other Agile development practices and methodologies.· SQL Server and relational database concepts experience in an enterprise environment.· MongoDB or other non-relational database platform experience in an enterprise environment· Can-do attitude with a demonstrated ability to get things done under minimal supervision.· Organized, detail-oriented, and process- and improvement-minded.

Ready to launch your engineering career with a U.S. Best Managed Company? KENT Precision Foods Group, a proud member of KENT WORLDWIDE, is excited to offer a fantastic opportunity for engineering students to join our team as a Division Engineer Intern for summer 2026! You'll gain hands-on experience supporting our Operations team with real-world technical projects at our Columbus, Mississippi location. Take the first step toward a future full of innovation, impact, and growth! * This position is designed and intended to be performed in Columbus, MS. PRIMARY DUTIES & RESPONSIBILITIES: * Support process improvement initiatives focused on food safety, product quality, efficiency, and sustainability. * Collaborate with cross-functional teams including Production, Maintenance, Quality Assurance, and Engineering to identify and implement operational improvements. * Participate in troubleshooting and root cause analysis of production and packaging line issues. * Help develop and update standard operating procedures (SOPs), training materials, and maintenance documentation. * Monitor equipment performance and assist in identifying opportunities for reliability and throughput improvements. * Contribute to continuous improvement efforts across operations to enhance performance and reduce waste. * Support commissioning and startup activities for new equipment or process changes. * Assist in data collection and analysis to support decision-making and project justification. EDUCATION, EXPERIENCE AND/OR QUALIFICATIONS: * Currently pursuing a Bachelor's degree in Engineering: Mechanical, Industrial, Electrical, Chemical, Process preferred. Other engineering disciplines may be considered. * Internship or co-op experience in operations, engineering, or manufacturing is preferred. * Strong communication and technical writing skills. * Proficiency in Microsoft Excel and other Microsoft Office applications. * Ability to manage multiple tasks and prioritize effectively in a fast-paced environment. * Previous experience in a food manufacturing or similar industrial environment is a plus. TRAVEL: * Limited travel (up to 10%) may be required for training or business support. OTHER: * While our facility is air-conditioned, some tasks may occasionally take place in the warehouse, which isn't climate-controlled. We'll always ensure safety is prioritized, and these experiences offer a great chance to see operations in action.

XDIN subsidiary of ALTEN Group, includes 500 employees dedicated to the automotive engineering development. ALTEN is a Leader in Engineering & Information Technology system, and operates in over 21 countries (Europe, North America, Asia, Africa and Middle East) with more than 28,000 employees of which 88% are engineers. At XDIN, we are always looking for world-class talent to lead our global teams through commitment and dedication to our OEM and Tier I clients. We believe in quality support from concept through production, and delivering the best customer experience while at the same time attaining a great place to work! XDIN Offers Competitive wages, BOE. Major health, dental insurance benefits and vision savings plan. 401k, and basic life. Supplemental benefits such as short-term disability, accident, cancer and life insurance. Paid company holidays and earned time off. We place a high value on thought leadership. We want every employee to develop all the skills required to become an engineering and technology thought leader; contributing to the knowledge assets of our team and our clients. From day one, every consultant is trained and mentored to elevate their careers. Software Developer Responsibilities: Modifying software to fix errors, adapt it to new hardware, improve its performance, or upgrade interfaces. Directing system testing and validation procedures. Directing software programming and documentation development. Consulting with departments or customers on project status and proposals. Working with customers or departments on technical issues including software system design and maintenance. Analyzing information to recommend and plan the installation of new systems or modifications of an existing system. Consulting with engineering staff to evaluate software-hardware interfaces and develop specifications and performance requirements. Designing and developing software systems using scientific analysis and mathematical models to predict and measure outcomes and design consequences. Preparing reports on programming project specifications, activities, or status. Conferring with project managers to obtain information on limitations or capabilities. Create Databases with photo capabilities. Create packaging instructions data base, to display the way the parts should be pack. Create a quality report, can be update by the auditors and saves the information into a database. Software Developer Requirements: Bachelor's degree in computer science or related degree. 3+ Years development Experience Good understanding of Front End Development and also Back End. Experience in C#, .Net, or Java Knowledge of the software development life-cycle. The desire to work in fast-paced environment. Ability to develop unit testing of code components or complete applications. Creativity is always a plus. Must be a full-stack developer and understand concepts of software engineering. Experience working on a variety of software development projects. Deep programming language knowledge.

As a preferred Engineering, Procurement, and Construction (EPC) contractor for North American energy companies, our mission is to harness the creative energy of our people and help them reach their full potential. This focus enables us to deliver innovative solutions and exceptional results for our customers through our Core Principles, which are the heart of Signal Energy and the foundation of our strong company culture. As a culture-fit-first hiring company, we look beyond skill and education for individuals who fit within our team and values. We are currently looking for interns for our Field Engineer Internship. This internship will be as a Field Engineer Intern. The position is 100% site based and located in Morton, MS just outside of Jackson, MS. The internships that we offer can vary. These can include: Co-op: We highly encourage participation in a co-op program. This experience allows you to take off 3 semesters to work with Signal Energy and gain valuable "real world" construction management experience. If this is the experience that you are interested in, please be sure that you have checked in with the Cooperative Education Department at your school. They will help determine if this is a good choice for you. Semester/Hybrid Internship: These types of internships usually last longer. This internship combines a summer and either a spring or fall semester tied to it. This gives you between 6-7 months of consecutive experience. This type of internship will give you about two months of experience at our home office in Chattanooga working as a functioning member of the project management team. Once you complete the two months in Chattanooga, you will be sent to the project site for the balance of your internship. Keep in mind, this will delay your graduation date by a semester but every student that we have had participate with this style of internship has told us that it was worth it. Not all programs will allow for you to be gone that long so be sure you check with your department advisor to determine whether this is possible. Summer Internship: Summer internships are usually offered to students that are early in their student experience for the purpose of having them work more than one summer. Our goals for every internship / co-op that we offer is as follows: Provide each student with a real world experience in construction management. Assign responsibilities, not tasks, that directly contribute to a live project. We want to help each student harness their creative energy and be a successful contributor to a project management team. To help you learn and grow within our culture in order to prepare you to become a high potential member of Signal Energy once you graduate. Are you ready to harness your creative energy and make an impact on the future of renewable energy? Signal Energy is an Equal Opportunity Employer and uses E-Verify.

This position is ideal for students pursuing a degree in Mechanical, Biomedical, or Manufacturing Engineering who want hands-on experience in the medical equipment industry. You will work on real-world projects, support product development, and gain valuable insights into the design, testing, and manufacturing of medical devices. Role and Responsibilities Assist engineers in the design and development of medical equipment. Support product testing, validation, and documentation processes. Work with cross-functional teams to improve manufacturing processes. Conduct research and analysis to enhance product performance and safety. Assist in troubleshooting technical issues in design and production. Maintain detailed records of engineering projects and test results. Ensure compliance with regulatory and quality standards. Qualifications Strong analytical and problem-solving skills. Basic knowledge of CAD software (e.g., SolidWorks, AutoCAD) is a plus. Familiarity with engineering principles and design processes. Excellent communication and teamwork skills. Ability to work independently and adapt to a fast-paced environment. Prior internship or project experience in medical device development is a plus Education Requirements Currently pursuing a bachelor's degree in mechanical, Biomedical or Manufacturing Engineering (or related field). Physical Requirements Frequent performing repetitive work. Occasional lifting (max. 40 lbs.) Occasional carrying (max. 40 lbs.) Subject to physical hazards from moving equipment and machine parts Constant safety glasses Constant full PPE Frequent standing Occasional sitting, walking, pushing, pulling, reaching. Tegra Medical is an Equal Opportunity Employer M/F/D/V

The VA NSOC defends, manages, and monitors the network operating status and cyber security posture of the VA by providing the day-to-day management, operation and configuration of the enterprise network infrastructure, Internet Gateways, the delivery of enterprise security systems and services, the monitoring and reporting of security incidents, the conduct of threat and vulnerability analysis, the validation of adequate security controls within the enterprise and the full range of functions across the spectrum of activities relating to incident management, incident response and enterprise network management. Seeking a ServiceNow (SNOW) Developer/.Net Developer for full time work at the VA's Network Security and Operations Center (NSOC) as part of the SNOW Development team. **Responsibilities** + ServiceNow (SNOW) development using the Application Platform + Provide expertise on all technical questions related to development on of SNOW + Create and manage scripts and workflow. + Develops the technical solutions, implements them and performs the component integration tests + Understand the business needs and the needs to standardize processes, and build this into the design + Troubleshoot issues and conduct root cause analysis + Resolve escalated issues with a sense of urgency + Identify potential improvements to reduce the number of problems and enhance supportability. + Document code consistently throughout the development process by listing a description of the program, special instructions, and any changes made in database tables on procedural, modular and database level. + Establish methodologies (documentation, process and procedures) to be followed during project life cycle + Foster teamwork and collaboration across a global development team, project teams, and business and systems partners **Qualifications** + At least three years of ServiceNow platform capabilities + Certification in ServiceNow Application Development + Scripted Web-Services, AJAX, Business Rules, JavaScript, SOAP, REST SSO-SAML Setup and Integration of ServiceNow to Other Applications + Experience in JavaScript and Jelly scripting languages + Experience with Business Rules, Script Includes, UI Actions, and Scheduled Jobs + Experience with ServiceNow client and server-side Javascript and the ServiceNow APIs + Scripted Web-Services, AJAX, Business Rules, JavaScript, SOAP, REST SSO-SAML Setup and Integration of ServiceNow to Other Applications + Customizing ServiceNow using UI Pages, UI Macro & CMS using CSS, HTML, Jelly. + Experience presenting and conducting demo reviews with client stakeholders + Strong experience in C# ASP.NET with .NET Framework 4.0 and above (Experience in multiple projects with capability to independently handle a project) a plus + Experience with OO design/development + Bachelor's with 5 - 8 years (or commensurate experience) + Base work location: Martinsburg, WV **Company Overview** GovCIO is a team of transformers--people who are passionate about transforming government IT. Every day, we make a positive impact by delivering innovative IT services and solutions that improve how government agencies operate and serve our citizens. But we can't do it alone. We need great people to help us do great things - for our customers, our culture, and our ability to attract other great people. We are changing the face of government IT and building a workforce that fuels this mission. Are you ready to be a transformer? **What You Can Expect** **Interview & Hiring Process** If you are selected to move forward through the process, here's what you can expect: + During the Interview Process + Virtual video interview conducted via video with the hiring manager and/or team + Camera must be on + A valid photo ID must be presented during each interview + During the Hiring Process + Enhanced Biometrics ID verification screening + Background check, to include: + Criminal history (past 7 years) + Verification of your highest level of education + Verification of your employment history (past 7 years), based on information provided in your application **Employee Perks** At GovCIO, we consistently hear that meaningful work and a collaborative team environment are two of the top reasons our employees enjoy working here. In addition, our employees have access to a range of perks and benefits to support their personal and professional well-being, beyond the standard company offered health benefits, including: + Employee Assistance Program (EAP) + Corporate Discounts + Learning & Development platform, to include certification preparation content + Training, Education and Certification Assistance* + Referral Bonus Program + Internal Mobility Program + Pet Insurance + Flexible Work Environment *Available to full-time employees Our employees' unique talents and contributions are the driving force behind our success in supporting our customers, which ultimately fuels the success of our company. Join us and be a part of a culture that invests in its people and prioritizes continuous enhancement of the employee experience. **We are an Equal Opportunity Employer.** All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, disability, or status as a protected veteran. EOE, including disability/vets. **Posted Pay Range** The posted pay range, if referenced, reflects the range expected for this position at the commencement of employment, however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, education, experience, and internal equity. The total compensation package for this position may also include other compensation elements, to be discussed during the hiring process. If hired, employee will be in an "at-will position" and the GovCIO reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, GovCIO or individual department/team performance, and market factors. **Posted Salary Range** USD $81,850.00 - USD $130,950.00 /Yr. Submit a referral to this job (*********************************************************************************************************************************************** **Location** _US-Remote_ **ID** _2025-7020_ **Category** _Information Technology_ **Position Type** _Full-Time_

The Software Applications Developer is responsible for analyzing software needs, designing, creating, coding, and testing application software from multiple platforms to serve the needs of the Center for Cyber Innovation (CCI). This position works closely together with members of technical teams for programming and hardware support to research projects. Salary Grade: 16 Please see Staff Compensation Structure for salary ranges. Department Profile: The Center for Cyber Innovation (CCI) is part of the High Performance Computing Collaboratory at Mississippi State University. CCI develops solutions for Defense, Homeland Security and the Intelligence Community. The primary focus of the CCI is to research, prototype and deliver cutting-edge cyber solutions that support global national security, homeland security and peacekeeping operations. Essential Duties and Responsibilities: Lead a software applications development team to develop applications for CCI open-source intelligence research projects. This includes being fully involved with all technical activities within the development team (software development life cycle activities, code reviews, research, etc.). The software applications developer will perform the following: Collaborate with affiliated faculty members, other CCI staff, and research sponsors to determine exact needs and specifications and develop concepts and strategies for development of application software. Determine best software platform for individual programming problems (such as mobile device, web-based, systems software, etc.). Design, code, and test application software prototypes and interact with faculty, staff, and research sponsors to refine application software prototype into a final solution. Create fully documented technical specifications for all applications developed and provide preliminary guidance on software operation to (user) documentation writers. Provide status reports and updates of projects to project managers. Establish standards and best practices. Create software code libraries to be used across multiple applications and by other developers within the team. Constantly monitor completed and in-progress applications and provide software patches and updates to ensure all remain updated and secure. Minimum Qualifications: Bachelor's degree in Computer Science, Computer Engineering, or related field. 3 years experience in Programmer Analyst, Software Developer, Web Programmer, Web Application Developer, Computer Programmer, Student/Graduate student programmer or a member of a software development team, providing technical leadership / guidance / mentorship. Preferred Qualifications: MS or PhD degree. One or more years' experience developing mobile applications for iOS and Android platforms. Knowledge of Team Awareness Kit/Tactical Assault Kit (TAK) platform is a plus. Knowledge, Skills, and Abilities: The software applications developer will possess the following knowledge, skills, and abilities: Demonstrable experience designing enterprise software and defining software systems in at least one of the following areas: iOS Development, Android Development, PHP/web application development. A basic understanding of information systems, relational databases, object oriented programming, and backup and recovery procedures. Demonstrated proficiency in Python required, as well as one or more of the following languages: JAVA, Kotlin, C++, C#, PERL, PHP, PL/SQL, MySQL, Objective C, Xcode. Strong technical skills with SQL in a web setting. Ability to analyze data, solve problems, and prioritize and organize work to achieve stated goals. Excellent interpersonal and communication skills. Basic understanding of user interaction design skills. Ability to work independently and collaboratively. Ability to communicate design rationale and build consensus. Ability to prioritize and manage work to critical project timelines in a fast-paced environment. Ability to develop new approaches to complex design problems. Working Conditions and Physical Effort Work is normally performed in a typical interior/office work environment. No or very limited exposure to physical risk. No or very limited physical effort required. Instructions for Applying: Link to apply: *********************************** Apply online by submitting a cover letter, resume, and a copy of your transcript(s). Any social security numbers included on requested transcripts should be redacted prior to submitting online. We will accept applications only from persons with indefinite employment authorization in the U.S., and will not sponsor for nonimmigrant or immigrant status for this position. Restricted Clause: Position is contingent upon continued availability of funding. Equal Employment Opportunity Statement: MSU is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, ethnicity, sex, religion, national origin, disability, age, sexual orientation, genetic information, pregnancy, gender identity, status as a U.S. veteran, and/or any other status protected by applicable law. We always welcome nominations and applications from women, members of any minority group, and others who share our passion for building a diverse community that reflects the diversity in our student population. What do I do if I need an accommodation? In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Mississippi State University, please contact the Department of Human Resources Management at tel: ************** or *******************. If you have any questions regarding this policy, contact the Department of Human Resources Management at ************** or *******************. Upon request, sections of this job listing are available in large print, and readers are available to assist the visually impaired.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. As a Grounds Systems Engineering Intern based at Rocket Lab's site in Stennis, Mississippi, you will have the opportunity to support the Test Ground Systems team in test operations for the Archimedes engine. The Ground Systems team is an integral part of the testing team, from designing and building new stands and capabilities, to making sure the stand continues to run smoothly day to day every day offers new challenges and opportunities to grow and contribute to the success of the mission. WHAT YOU'LL GET TO DO As an intern, you will work closely with your mentor and other employees within the department to apply your knowledge and grow your skills both technically and professionally Work with a fast-paced group of professionals to apply engineering and industry concepts to solve real challenges Attend frequent 1:1's with mentors and supervisors to facilitate success and learning while providing progress updates Enjoy tech talks and network with other interns and employees through social and professional events YOU'LL BRING THESE QUALIFICATIONS Ideal candidates will thrive in ambiguity and are excited to work in small, high-performing teams that are focused on continued learning and growth. Success in this position will be measured by the knowledge and experience you bring to the role, your ability to lead development projects without supervision, and your ability to successfully collaborate across teams to deliver results. Must be enrolled in a bachelor's, master's or doctorate degree program in an engineering discipline such as Electrical, Mechatronics or Robotics Engineering, or physics discipline and have at least one semester of school remaining post internship GPA of 3.0 or above 3+ months of applied engineering experience (internship, laboratory, and personal/team project experience is applicable) THESE QUALIFICATIONS WOULD BE NICE TO HAVE GPA of 3.5 or above 6+ months of applied engineering experience (internship, laboratory, and personal/team project experience is applicable) Experience with Soildworks Finite Element Analysis (FEA) experience Proficient in Computer-aided design and manufacturing (CAD/ CAM) Geometric Dimensioning & Tolerancing experience Experience working with pressurized systems Proficient knowledge of fluid dynamics ADDITIONAL REQUIREMENTS Able to work full-time, on-site for a minimum of 12 consecutive weeks beginning May or June 2026. COMPENSATION AND OTHER BENEFITS You may be eligible for a stipend to subsidize relocation costs WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at ***********************.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.