Post job

Explore jobs

Find specific jobs

Explore careers

Explore professions

Best companies

Explore companies

OverviewJobs

Skills

DemographicsJob DescriptionHow To HireBest CompaniesJob OutlookCompare
zippia ai icon

Automatically apply for jobs with Zippi

Upload your resume to get started.

Solids control technician skills for your resume and career

Updated January 8, 2025
2 min read
Below we've compiled a list of the most critical solids control technician skills. We ranked the top skills for solids control technicians based on the percentage of resumes they appeared on. For example, 31.8% of solids control technician resumes contained centrifuges as a skill. Continue reading to find out what skills a solids control technician needs to be successful in the workplace.

15 solids control technician skills for your resume and career

1. Centrifuges

Here's how solids control technicians use centrifuges:
  • Traveled to rig locations for setting-up, tearing-down, monitoring and maintaining centrifuges and processing related equipment.
  • Experienced in running Alpha Laval Variable Frequency Drive centrifuges Working at shop level: Duties include keeping current inventory of equipment.

2. Electrical Issues

Here's how solids control technicians use electrical issues:
  • Provide Exceptional Customer service, Maintain and operate solids control equipment, Troubleshoot and repair of electrical issues.

3. Front End Loader

The front-end loader is a piece of heavy equipment, usually, a wheeled vehicle (sometimes on tracks) with a hydraulically operated excavator at the front to excavate and load materials such as dirt, earth, stone, sand, demolition debris, asphalt, etc. into another type of machine such as dump trucks, conveyor belt, etc. without pushing the material against the ground. The front of the loader has a large square-shaped bucket connected to the base by two hydraulic arms.

Here's how solids control technicians use front end loader:
  • Operated heavy equipment such as front end loader, excavator, extend a boom, man lift, and skid steer.
  • Front end loader work, loading trucks, unloading trucks, scooping dirt and solids and back dragging the yard.

4. Equipment Maintenance

Equipment maintenance is any process that includes the use of maintenance methods and procedures to keep the organization's equipment in good and reliable working condition. This may include routine maintenance as well as corrective repairs. The practice takes place in a variety of settings, including catering establishments, industrial factories, manufacturing facilities, hotels, etc.

Here's how solids control technicians use equipment maintenance:
  • Ensured that equipment maintenance was completed and documented showing equipment is working properly.
  • Reviewed, revised and implemented equipment maintenance procedures.

5. Augers

Here's how solids control technicians use augers:
  • Maintain dryers, shakers, pumps, augers, disposal, and kept equipment clean
  • Help Ran centrifuge and verti g dryer, Auger etc.

6. Dryers

Here's how solids control technicians use dryers:
  • Used a track hoe while working on vertical dryers to consistently feed the hopper so cuttings could be hauled off site.
  • Maintained equipment such as: excavator, dryer package, centrifuge, dryer shakers, and shaker screens.

Choose from 10+ customizable solids control technician resume templates

Build a professional solids control technician resume in minutes. Our AI resume writing assistant will guide you through every step of the process, and you can choose from 10+ resume templates to create your solids control technician resume.

7. Track Hoe

Here's how solids control technicians use track hoe:
  • Operated track hoe and front loader in removing drilled solids.
  • Load end dumps with Track Hoes and Back Hoes.

8. Drilling Fluid

Here's how solids control technicians use drilling fluid:
  • Rigged up and rigged down solids control equipment, recorded and reported all aspects of drilling fluids and drilling operations.
  • Work with rig site manager and mud engineer to ensure all drilling fluids are maintained to hole specifications and needs.

9. JSA

Here's how solids control technicians use jsa:
  • Complete all required paperwork (safety documents, JSA's, work orders, service records, and daily reports).
  • Generate daily reports for Company Man and solids control company Complete JSA's and other documents for daily or specific jobs.

10. VFD

Here's how solids control technicians use vfd:
  • Operated VFD to Rig Standards.
  • Run VFD, Run dryer shakers.

11. Load Trucks

Here's how solids control technicians use load trucks:
  • Run excavator to mix off cuttings and load trucks to haul away waste.
  • Unload trucks of chemical with loader or boom.

12. Polymer

A polymer is a material containing large molecules made from several repeating subunits. There are two types of polymers, human-made like amber, wool, and hemp, and synthetic such as synthetic rubber, nylon, etc.

Here's how solids control technicians use polymer:
  • Used 100bbl auger tanks coupled with great pumps that were polymer injected for de watering operations.
  • Decreased hydration times and increased the polymer chain length.

13. Clean Water

Here's how solids control technicians use clean water:
  • separate cuttings from water to send clean water back to the rig and did the same on mud

14. Safety Procedures

Safety procedures are a set of standardized procedures, that ensures minimal to no risk to people, resources, and the work environment. A company follows the step-by-step safety procedures as it they not only keep the customers and the employees safe, but also help in avoiding legal claims.

Here's how solids control technicians use safety procedures:
  • Trained client personnel and rig crews in equipment operations, as well as safety procedures.
  • Complied with safety procedures including use of required safety equipment and identified unsafe practices or conditioned faults and resolved equipment issues.

15. CPR

Cardiopulmonary resuscitation or CPR is a medical procedure that involves chest compression to help a patient breathe. This artificial ventilation helps in keeping the brain function in place and regulates blood throughout the body. CPR is a lifesaving procedure that is used in emergencies.

Here's how solids control technicians use cpr:
  • Expanded professional knowledge base by attending various seminars and training sessions including CPR and Crisis Patient Intervention certification.
  • Performed life-saving interventions including CPR for critically ill patients.
top-skills

What skills help Solids Control Technicians find jobs?

Tell us what job you are looking for, we’ll show you what skills employers want.

List of solids control technician skills to add to your resume

Solids control technician skills

The most important skills for a solids control technician resume and required skills for a solids control technician to have include:

  • Centrifuges
  • Electrical Issues
  • Front End Loader
  • Equipment Maintenance
  • Augers
  • Dryers
  • Track Hoe
  • Drilling Fluid
  • JSA
  • VFD
  • Load Trucks
  • Polymer
  • Clean Water
  • Safety Procedures
  • CPR
  • PEC
  • Site Locations
  • Routine Maintenance
  • Mud Weight
  • H2S
  • Equipment Repair
  • Solids Control Equipment
  • Optimal Operation
  • Fresh Water
  • OBM
  • General Maintenance
  • Drill Cuttings
  • Booms
  • PPE
  • Electrical Problems
  • Service Equipment
  • Optimal Performance
  • Rig Moves
  • Client Location

Updated January 8, 2025

Zippia Research Team
Zippia Team

Editorial Staff

The Zippia Research Team has spent countless hours reviewing resumes, job postings, and government data to determine what goes into getting a job in each phase of life. Professional writers and data scientists comprise the Zippia Research Team.

Updated January 8, 2025

Browse building and grounds maintenance jobs