Technician jobs at SBM Management Services

About the Role: The Telematics System Analyst is responsible for coordinating all Telematics activities for the Fleet organization. This includes managing hardware installation, reporting requests, driver compliance of logging requirements, geofence management, fuel and mileage reporting for IFTA and IRP, safety alert reporting, and system user management activities. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. Essential Functions Device installation and maintenance Manage new device installations Activate and terminate devices Set up and maintain user profiles Troubleshooting Identify non-communicating devices; build appropriate work orders for correction Investigate mileage and hours differences between Fleet data and Telematics Investigate public complains and provide reports Telematics system administration Provide various reports including alerts Reconcile monthly invoicing Ensure ignition sequences are collected on equipment Ensure aerial components collect PTO measurements Develop & deliver employee training on Telematics Any other activities necessary to assist in maintaining accurate and useful Telematics data Regular and predictable attendance Other duties as assigned Essential functions of this position are to be performed at a Company-designated office or field location Understand and comply with the Company's Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: Qualifications 1 to 3 years of experience working with Telematics software application Prior experience providing Telematics training and support to users Analytics and reporting experience related to Telematics data Bachelor's or Associate's degree in Information Technology, Computer Science, Business or comparable field preferred; or equivalent combination of education and experience Knowledge/Skills/Abilities Good verbal and written communication skills Good analytical thinking skills Detail oriented with strong problem-solving skills Time management skills Proficiency in MS Office Suite Ability to maintain confidentiality Working knowledge of Fleet operations What We Offer: Compensation & Benefits Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate. Two days per week remote work option for non-field roles depending on position and performance. Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - Fifteen Dollar weekly premium for employee or employee plus family coverage. Dental - 100% employer-paid premium. ThrivePass Health & Wellness Reimbursement Program - Twelve hundred dollars annually for health and wellbeing-related purchases. Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday). Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential. Superior educational assistance program (support for educational costs, internal training, and more!). Company-paid short and long-term disability, life, and accidental death & dismemberment. Company-paid business travel accident insurance. Employee Assistance Plan (EAP). Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-JS1 LinkedIn Location Expansion #: #IN LinkedIn Workplace: #LI-Hybrid

Who are we? Satellite Industries is the world's largest supplier of products to the portable sanitation industry, which includes portable restrooms, handwash units, consumables, deodorizers, vacuum trucks, vacuum technology, unit haulers, restroom, shower, and specialty trailers. Position Summary: The Production Technician 2: PVA works with materials to create a finished product for commercial or industrial use. Please note that this position has a typical schedule of Monday - Thursday, 7am to 6pm. Essential Duties and Responsibilities: Follow checklist for production start-up including: preparing machine for production, ensuring line is ready for production, turning on production equipment including but not limited to: compressor, vacuum, Mattpak, etc. Input work orders into appropriate printers to ensure accurate product marking. Affix product label rolls onto labeling machine. Initiate and monitor the operation of the automated bagging machine. Generate pallet tickets and record pallet information clearly and accurately. Conduct routine quality inspections to ensure product meets Satellite standards and identify and report any quality defects promptly. Count materials and report inventory discrepancies. Understanding work orders and bill of materials and ability to review and sign off on materials as required. Count and stack boxed product(s) in a neat and thorough manner. Move, stack, wrap, and replace pallets on robot. Bag packets into bags utilizing appropriate equipment/machinery. Perform accurate hand-counting of packets. Complete housekeeping duties regularly, following standard operating procedures and operational needs including but not limited to: sweeping, squeegeeing floors, cleaning process equipment, etc. Report waste and scrap materials in an accurate and timely manner. Verify that all materials match the specifications outlined in work orders. Labeling containers to meet customer specifications and federal regulations. Supervisory Responsibilities: No formal supervisory role. Education and Experience Requirements: This position prefers a high school diploma/GED. 3+ years of chemical production experience or the equivalent of training and experience. 3+ years manufacturing equipment operation experience. Required Skills: Proficient understanding of running manufacturing equipment. Intermediate manufacturing experience required. Ability to read, comprehend, and follow written instructions, chemical labels, safety regulations, and company policies, etc. Ability to maintain composure and effectiveness in a high-pressure and fast-paced environment. Technical Capacity. Ethical Conduct. Strong attention to detail. Ability to multi-task and be self-directed while remaining a team player. Excellent communication and teamwork skills. Independent Decision-Making skills. Physical/Mental Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk, read, count, and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, pushing, pulling, climbing ladders, and lifting throughout the day. The employee must frequently lift and/or move items over 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The employee must be able to use the personal protective equipment (PPE) that is determined to be necessary for this position including, but not limited to: respirators with a minimum requirement of N-95, safety-grade gloves, safety-grade eye protection, steel or composite toe shoes, etc. WORK ENVIRONMENT: While performing the duties of this job, the employee will be required to regularly work in a manufacturing environment working with multiple agents and reactants including, but not limited to: fumes, chemicals, airborne particles, moving mechanical parts etc. The noise level is typically moderate but hearing protection may be required. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. PM25

Who are we? Satellite Industries is the world's largest supplier of products to the portable sanitation industry, which includes portable restrooms, handwash units, consumables, deodorizers, vacuum trucks, vacuum technology, unit haulers, restroom, shower, and specialty trailers. Position Summary: The Production Technician 2: PVA works with materials to create a finished product for commercial or industrial use. Please note that this position has a typical schedule of Monday - Thursday, 7am to 6pm. Essential Duties and Responsibilities: Follow checklist for production start-up including: preparing machine for production, ensuring line is ready for production, turning on production equipment including but not limited to: compressor, vacuum, Mattpak, etc. Input work orders into appropriate printers to ensure accurate product marking. Affix product label rolls onto labeling machine. Initiate and monitor the operation of the automated bagging machine. Generate pallet tickets and record pallet information clearly and accurately. Conduct routine quality inspections to ensure product meets Satellite standards and identify and report any quality defects promptly. Count materials and report inventory discrepancies. Understanding work orders and bill of materials and ability to review and sign off on materials as required. Count and stack boxed product(s) in a neat and thorough manner. Move, stack, wrap, and replace pallets on robot. Bag packets into bags utilizing appropriate equipment/machinery. Perform accurate hand-counting of packets. Complete housekeeping duties regularly, following standard operating procedures and operational needs including but not limited to: sweeping, squeegeeing floors, cleaning process equipment, etc. Report waste and scrap materials in an accurate and timely manner. Verify that all materials match the specifications outlined in work orders. Labeling containers to meet customer specifications and federal regulations. Supervisory Responsibilities: No formal supervisory role. Education and Experience Requirements: This position prefers a high school diploma/GED. 3+ years of chemical production experience or the equivalent of training and experience. 3+ years manufacturing equipment operation experience. Required Skills: Proficient understanding of running manufacturing equipment. Intermediate manufacturing experience required. Ability to read, comprehend, and follow written instructions, chemical labels, safety regulations, and company policies, etc. Ability to maintain composure and effectiveness in a high-pressure and fast-paced environment. Technical Capacity. Ethical Conduct. Strong attention to detail. Ability to multi-task and be self-directed while remaining a team player. Excellent communication and teamwork skills. Independent Decision-Making skills. Physical/Mental Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk, read, count, and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, pushing, pulling, climbing ladders, and lifting throughout the day. The employee must frequently lift and/or move items over 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The employee must be able to use the personal protective equipment (PPE) that is determined to be necessary for this position including, but not limited to: respirators with a minimum requirement of N-95, safety-grade gloves, safety-grade eye protection, steel or composite toe shoes, etc. WORK ENVIRONMENT: While performing the duties of this job, the employee will be required to regularly work in a manufacturing environment working with multiple agents and reactants including, but not limited to: fumes, chemicals, airborne particles, moving mechanical parts etc. The noise level is typically moderate but hearing protection may be required. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. PM25

Truck Chassis Assembler Install chassis mounted tank and pumping equipment for use in the liquid waste industry. Most common uses for the trucks are portable toilet service, septic service, waste oil collection. Most common installations include the mounting of a vacuum tank to the truck chassis with various types of mounting brackets. The vacuum pumping systems are generally power take off driven or hydraulic driven and are bolted to the truck frame. Water delivery systems are generally 12V electric driven, along with work lights, back up cameras, and other various safety systems. All legal lighting and bumpers must also be installed. General Skills Needed: General knowledge of 12 volt electrical systems and wiring installation Ability to read wiring diagrams and blue prints Ability to use measuring devices like a tape measure, levels and micrometer Ability to use power tools like, drills, saws, air tools, etc. Light welding, cutting & metal fabrication General mechanical knowledge Ability to safely operate lifting equipment like hoists and lift trucks Ability to read installation manuals for a variety of truck equipment and install them as per instructions PTO installation skills are a plus Hydraulic experience is a plus A Good work ethic and an eagerness to learn are a must. Work Environment: This job operates in a manufacturing operation setting. The role is exposed to high heat in the summer and low temperatures in the winter for limited amounts of time. Physical/Mental Demands: This job could require standing, squatting, climbing and working on ladder or step stool. The weight is up to 50 lbs lifting working in heat/cold. Position Type: This is a full-time position. Expected Hours of Work: The typical days and hours of work are Monday through Thursday 6:00 am - 4:00pm Overtime is required as needed for production. PM25

Truck Chassis Assembler Install chassis mounted tank and pumping equipment for use in the liquid waste industry. Most common uses for the trucks are portable toilet service, septic service, waste oil collection. Most common installations include the mounting of a vacuum tank to the truck chassis with various types of mounting brackets. The vacuum pumping systems are generally power take off driven or hydraulic driven and are bolted to the truck frame. Water delivery systems are generally 12V electric driven, along with work lights, back up cameras, and other various safety systems. All legal lighting and bumpers must also be installed. General Skills Needed: General knowledge of 12 volt electrical systems and wiring installation Ability to read wiring diagrams and blue prints Ability to use measuring devices like a tape measure, levels and micrometer Ability to use power tools like, drills, saws, air tools, etc. Light welding, cutting & metal fabrication General mechanical knowledge Ability to safely operate lifting equipment like hoists and lift trucks Ability to read installation manuals for a variety of truck equipment and install them as per instructions PTO installation skills are a plus Hydraulic experience is a plus A Good work ethic and an eagerness to learn are a must. Work Environment: This job operates in a manufacturing operation setting. The role is exposed to high heat in the summer and low temperatures in the winter for limited amounts of time. Physical/Mental Demands: This job could require standing, squatting, climbing and working on ladder or step stool. The weight is up to 50 lbs lifting working in heat/cold. Position Type: This is a full-time position. Expected Hours of Work: The typical days and hours of work are Monday through Thursday 6:00 am - 4:00pm Overtime is required as needed for production. PM25

Truck Chassis Assembler Install chassis mounted tank and pumping equipment for use in the liquid waste industry. Most common uses for the trucks are portable toilet service, septic service, waste oil collection. Most common installations include the mounting of a vacuum tank to the truck chassis with various types of mounting brackets. The vacuum pumping systems are generally power take off driven or hydraulic driven and are bolted to the truck frame. Water delivery systems are generally 12V electric driven, along with work lights, back up cameras, and other various safety systems. All legal lighting and bumpers must also be installed. General Skills Needed: General knowledge of 12 volt electrical systems and wiring installation Ability to read wiring diagrams and blue prints Ability to use measuring devices like a tape measure, levels and micrometer Ability to use power tools like, drills, saws, air tools, etc. Light welding, cutting & metal fabrication General mechanical knowledge Ability to safely operate lifting equipment like hoists and lift trucks Ability to read installation manuals for a variety of truck equipment and install them as per instructions PTO installation skills are a plus Hydraulic experience is a plus A Good work ethic and an eagerness to learn are a must. Work Environment: This job operates in a manufacturing operation setting. The role is exposed to high heat in the summer and low temperatures in the winter for limited amounts of time. Physical/Mental Demands: This job could require standing, squatting, climbing and working on ladder or step stool. The weight is up to 50 lbs lifting working in heat/cold. Position Type: This is a full-time position. Expected Hours of Work: The typical days and hours of work are Monday through Thursday 6:00 am - 4:00pm Overtime is required as needed for production. PM25

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Orlando, FL, branch ( This branch is due to move to a new location in Apopka in early 2026) . The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Omaha, NE, branch. The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Orlando, FL, branch ( This branch is due to move to a new location in Apopka in early 2026) . The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Omaha, NE, branch. The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Omaha, NE, branch. The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

Service Technician Lead Reports To: Field Supervisor or General Manager Status: Full-time, Regular position Why You Should Join the Service Experts Team? Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth. Join us and become an EXPERT! Service Experts Company Perks and Benefits for YOU Top Pay for Top Performers, including incentive and bonus opportunities (depending on the position) Our Top Technicians earn over $100,000 Generous PTO provided 24 paid days off within your first year of employment (vacation, personal holidays, & national holidays) 29 paid days off after your 2nd year of employment Ready to get out of your work truck? We have ample advancement and career-growth opportunities available across the U.S. Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programs Company-provided smart phone, tablet, uniform plan, and tool replacement program We'll make you better at what you do with our internal Training Academy Best-in-class 401(k) Retirement Savings Plan with attractive company matching contributions Company-paid employee Life Insurance with options for YOU and your Family! Short-term and Long-term disability insurance options that will protect you and your family if you are unable to work Supplemental benefit programs such as: Legal advice, pet insurance, and health advocacy programs Come join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing! Position Summary: Under minimal supervision, performs diagnostic and service work on residential and/or light commercial HVAC equipment and accessories. Communicates with customer to answer questions, resolves problems, and ensures complete customer satisfaction. Promotes products and services to customer. Works under the direction of the Field Supervisor or General Manager. Key Responsibilities: Works under minimal supervision to perform residential and/or light commercial service and maintenance calls Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner Diagnoses and performs services on heating, air conditioning, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner Inspects equipment and performs diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks Completes routine maintenance and equipment cleaning as needed or required Responsible for delivery and removal of parts and equipment needed to complete service work Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner. Collects payment from customer. Communicates with dispatch, while on duty, to ensure dispatcher has an accurate status report of activities and availability Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit. Ensures company property, vehicles, and tools are being used, maintained, and properly accounted for Represents the company professionally, honestly, and ethically in all business matters and activities Follows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to the branch, and orders/replenishes vehicle stock as needed Performs similar/other duties as needed or assigned Regular, reliable attendance Health & Safety Roles and Responsibilities: Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediately Reports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediately Corrects substandard acts or conditions within area of control Uses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s) Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or worn Complies with the general rules as prescribed by company program(s) procedure(s) Operates devises or equipment as prescribed by company program(s) or procedure(s) Participates in any safety initiatives, teams, or committees Reports all injuries or incidents as prescribed by company program(s) or procedure(s) immediately Provides input on developing safety initiatives and plans to eliminate exposures that could cause accidents Does not perform act that may endanger the safety or well-being of others Does not engage in any pranks, contests, or rough boisterous behavior Works in compliance with applicable legislative requirement Desired Skills and Qualifications: High school diploma or GED with additional training and 5+ years' experience in HVAC with technical training certification required OK Journeyman HVAC License Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area EPA and safety certifications required Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories Proficient mechanical aptitude and the ability to operate all necessary tools and equipment Proficient and able to operate all necessary tools and equipment to perform various service projects Proficient at reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on HVAC equipment Proficient and able to properly start up and balance airflow and to properly align belts and pulleys on all systems with little to no supervision Proficient and able to install a basic duct fitting Proficient at troubleshooting and repairing electronic air cleaners, refrigeration systems, hot water systems, steam boiler systems, humidifiers, and related equipment with little to no supervision Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns Effective and efficient time-management and organizational skills Valid driver's license with acceptable driving record Available to work flexible hours and on-call shifts as needed Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl. Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception Ability to lift up to 75 pounds and ability to lift and carry items weighing up to 50 pounds

Level 1 IT Technician Office: Long Island City, NY (daily travel to client sites in NYC required) Company: TEC Building Systems LLC | tecsystemsnyc.com Salary range: $55,000 - $65,000 Reports to: Basim Sharhan, IT Manager Recruiter: Kate Lewis, People Ops Program Manager Please apply on LinkedIn and send resume and cover letter to ********************* OVERVIEW TEC Building Systems is seeking a Level 1 IT Technician to join our growing team. In this role, you'll design, maintain, and troubleshoot the hardware and software of our customers' building management systems. You'll provide technical support both in-house and on-site, perform upgrades and preventive maintenance, and assist with training non-technical staff in troubleshooting techniques. This position requires daily travel to client sites throughout New York. Applicants must hold a valid driver's license. RESPONSIBILITIES Perform preventative maintenance on servers and workstations at customer sites Install and configure desktop and laptop computers, peripherals, and related hardware Integrate devices into network environments and test software applications Provide Tier 1 hardware and software support for Windows devices Deliver on-site technical support and ensure client satisfaction during deployments Document all work assignments, resolutions, and client approvals Provide help desk support: problem determination, documentation, diagnostics, resolution, and ticket escalation Troubleshoot hardware, software, and connectivity issues for end users Support users with MS Office, antivirus tools, mobile devices, and peripherals Use remote desktop software to resolve issues or walk clients through solutions Act as a liaison between customers and internal IT staff for accurate problem interpretation Maintain accurate ticketing and reporting in the help desk system QUALIFICATIONS Required: Experience: Minimum 1+ year of frontline IT support (help desk, service desk, or equivalent). Customer Service: Strong interpersonal, customer service, and follow-up skills with a focus on user satisfaction. Communication: Excellent written and verbal communication, including the ability to explain technical concepts to non-technical users. Work Style: Self-motivated, reliable, and able to work independently while managing multiple priorities. Operating Systems: Hands-on troubleshooting experience with Microsoft Windows 10 and Windows 11; familiarity with Windows Server 2016/2019. Software & Applications: Proficiency with Microsoft 365/Office 365 suite, endpoint security/antivirus tools, and common business applications. Hardware & Peripherals: Experience supporting desktops, laptops, printers, scanners, and mobile devices (iOS/Android). Networking: Basic understanding of TCP/IP, DNS, DHCP, and VPN concepts. Documentation: Strong documentation, ticketing, and research skills; experience with ITSM platforms (e.g., ConnectWise, ServiceNow, or similar) is a plus. Licensing & Compliance: Awareness of data security, acceptable use, and basic IT compliance practices. Other: Valid driver's license and ability to travel daily within the New York metropolitan area. Preferred (Nice to Have): CompTIA A+, Network+, or equivalent certification. Exposure to Active Directory (user accounts, password resets, group membership). Experience with remote support tools (TeamViewer, AnyDesk, RDP, etc.). Familiarity with basic IT asset management and inventory tracking. WHY JOIN TEC? Since 1981, TEC Building Systems has been a trusted leader in building automation. Based in Long Island City, we design and deliver custom control solutions for New York's most iconic projects. At TEC, you'll join a collaborative, future-focused team with opportunities for growth, training, and long-term career development.

Manufacturing Technician - Fremont, CA (On‑Site) Pay: $47.00/hour. Schedule: Full-time, Monday-Friday, 8:00 AM-4:30 PM Work Environment: In-person. Some travel to Hayward as needed An on-demand autonomous ride‑hailing company is seeking a Manufacturing Technician to support the assembly and testing of next‑generation autonomous vehicles. This team is transitioning from R&D to commercial launch, and your hands-on expertise will directly influence build quality, system reliability, and production readiness. You'll work on vehicle assembly lines, support sub‑assemblies, run software bring‑up scripts, perform light diagnostics, and collaborate closely with engineering teams. Your feedback will help refine processes, improve safety, and accelerate the company's path to mass production. What You'll Do Work closely with leads and technicians on vehicle assembly line builds Perform sub‑assembly of smaller components to support production Support bring‑up activities, including running scripts and assisting with software testing Conduct light diagnosis and troubleshooting of vehicle issues Execute daily tasks to ensure on‑time project completion Provide feedback to engineering and development teams Collaborate with cross‑functional teams as needed Follow all Environmental Health and Safety (EHS) guidelines Identify opportunities to improve quality, efficiency, and safety Ideal Candidate Profile The strongest candidates bring hands‑on mechanical skills, a positive attitude, and the ability to stay productive even during downtime. Positive attitude, quick learner, strong team player Comfortable with cutting, drilling, teardown, and rebuild work on Toyota Highlanders Experience with sub‑assembly to feed the production line Able to run basic software scripts (copy/paste, execute) Bachelor's degree + 4-6 years experience preferred; 2-4 years considered with strong soft skills Electrical work is minimal (10-15%) and can be learned CAN/LIN familiarity is a plus Automotive line experience translates well Semiconductor line experience is not a fit Required Skills & Qualifications Bachelor's degree with 4-6 years of technician or manufacturing experience, or equivalent industry experience Proficiency with basic hand and power tools Strong analytical and problem‑solving skills Understanding of basic electrical theory Ability to read electrical schematics and harness drawings Familiarity with CAN/LIN systems is a plus Automotive/OEM experience preferred Associate Degree or Certificate in Automotive Technology is a plus Why This Role Matters As a Manufacturing Technician, you'll help build and test autonomous vehicles equipped with Gen2 technology. Your work will directly influence: Build quality System reliability Safety improvements Speed to commercial launch Your hands-on insights will help refine key systems and accelerate the company's transition from prototype to production.

The Engineering Support Technician-3 team member works independently throughout the manufacturing plants to analyze, modify, and build machines, tools, fixtures, jigs, templates, and guards. Team member will work with other technicians, tool room personnel, engineers, department managers, and operators during the analysis and implementation phases of various projects. Key Responsibilities Draft and design shafts, jigs, and equipment components. Create and update designs using 3D modeling tools (SolidWorks). Fabricate parts using lathe, mills, welding, and metalworking techniques. Translate designs and models into finished components and complete machines. Modify and upgrade existing machines for improved performance. Diagnose mechanical failures and provide engineering support solutions. Example projects include fabricating mounts for sensors on conveyor belts. Qualifications Education: Associate's degree in Engineering Design Technology, Drafting, or CAD. Experience:Proficiency in CNC machining, welding, and metal fabrication. Strong skills in 3D modeling (SolidWorks). Hands-on experience with mills, lathes, and general machine shop tools. Ability to take a design from concept through fabrication and assembly. Ideal Candidate Detail-oriented with strong problem-solving skills. Comfortable working independently and as part of a team. Skilled in scaling projects and rounding out technical capabilities. PROGRESSION REQUIREMENTS: All base level requirements must be met within two years upon position acceptance. To reach a progression level you must demonstrate technical skills, leadership skills and pass classes / certifications as identified by the progression review committee. ENVIRONMENT: · Noise level requires hearing protection in designated areas · Season high temperatures and humidity · Work in a team environment with the ability to communicate in a concise, polite and respectful manner Final Selection by Panel Interview

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy. A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments. Hourly Rate: $33.30, $2 night shift differential Shift: Night shift, 5:45pm-6:00am rotating schedule At the Johns Manville Scottsboro, AL facility, we manufacture reinforced TPO roof membrane and accessories. We take pride in our innovative process and our commitment to excellence. Here, our PEOPLE are at the core of everything we do, our PASSION drives us to go the extra mile, we PERFORM at a superior level, and we PROTECT today to ensure tomorrow. Position Overview: As a Multi-Craft Electrical/Maintenance Technician, you'll play a crucial role in maintaining and enhancing our production and facility equipment, ensuring we continue to deliver top-quality TPO roofing materials. This role is integral to achieving our safety, productivity, and uptime goals while embodying our core values and delivering the JM experience. Your Day-to-Day: Follow Job Safety Analysis (JSA's), employ safe work practices, and report hazardous conditions. Perform both routine and complex maintenance activities on mechanical and electrical systems. Install and repair electrical conduit and cable, ensuring proper connections and grounding. Utilize schematics for troubleshooting or installing equipment. Conduct electrical measurements and use common shop tools for various maintenance tasks. Inspect equipment, report defects, and perform preventative maintenance. Troubleshoot and repair production and facility equipment to maintain optimal operations. Track and manage work orders using SAP maintenance modules. What You Bring to the Team: High school diploma or equivalent 2-5 years of electrical/maintenance experience in a manufacturing or similar environment Strong skills in troubleshooting, wiring, and installing industrial electrical equipment Proven mechanical troubleshooting, installation, and repair abilities Preferred Requirements: Associate degree in a related technical area Expertise in PLCs, HMIs, and associated hardware Knowledge of 24V - 480V AC/DC electrical power and control systems, VFDs, and PLC systems Physical Requirements: Ability to work in typical manufacturing conditions with exposure to varying environmental factors. Capacity to work 12-hour shifts and lift up to 50 pounds as needed. Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team. Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees. Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs. Diversity & Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Job Title: Testing Technician FLSA Status: Non- Exempt The Testing Technician is responsible for supporting dielectric testing processes with a focus on product safety, regulatory compliance, and risk management. This part-time role requires approximately 20 hours per week, with the possibility of additional hours based on operational needs. ESSENTIAL FUNCTIONS: Operate testing equipment in accordance with established procedures. Inspect products to ensure they meet safety and compliance standards. Receive and prepare customer products for testing or shipment. Schedule customer pickups and deliveries. Deliver and pick up customer orders as needed. Maintain positive and professional customer interactions. Manage and track inventory levels. Safely operate a forklift in daily operations. DESIRED MINIMUM QUALIFICATIONS: High school diploma Strong verbal and written communication skills. Ability to understand and convey technical information effectively. Strong analytical and problem-solving abilities; capable of prioritizing tasks and meeting deadlines. Proficiency in Microsoft Word, Excel, Outlook, and web browsers. Ability to lift up to 25 pounds regularly. Ability to remain standing for extended periods during the workday. Valid driver's license required. INTREN is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Permit Coordinator - St. Cloud, Florida A WORLD LEADER IN TESTING, INSPECTION & CERTIFICATION SERVICES Bureau Veritas offers dynamic, exciting employment opportunities with an attractive salary/benefit package and an opportunity to play a vital role with a global organization. If you would enjoy working in a dynamic environment and are looking for an opportunity to become part of a stellar team of professionals, we invite you to apply online today. Bureau Veritas is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, citizen status, sexual orientation, genetics, status as a protected veteran, or any other non-job-related characteristics. The Permit Coordinator is responsible for inspection scheduling, inspection reporting, and plan review processing, while completing organizational and administrative tasks to support the department's daily operations. Strong attention to detail and organizational abilities are needed to successfully sort and keep track of various time-sensitive tasks. The Permit Coordinator must be able to apply problem-solving and critical thinking skills for problem resolution when conflicts arise. Essential Duties and Responsibilities include the following. Other duties may be assigned. Process inspection requests and schedule inspections following company established procedures. Provides support for administrative functions in the assigned department. Answers incoming calls; processes mail, faxes, copying, FedEx shipments, etc. Manages the workload to ensure all tasks are completed within the established timeframes. Process final packets for Certificates of Occupancy or Completion. Assists clients to meet construction goals and timeframes. Identify and report conflicts or issues with scheduling and/or company databases. Communicates scheduling changes with staff and clients. Performs data entry and maintenance of company databases, directories and records. Performs a variety of essential record keeping duties, and maintains department record keeping and filing systems Process plans for review, acting as liaison between staff and client Assists with any other duty that is required to ensure inspections are scheduled and reported accurately. Performs other related duties, as directed. NOTE: Management retains the discretion to add to or change the duties of the position at any time. Experience: High school graduate with, at least, 3 years of office experience General knowledge of the Construction Industry Proficient with Microsoft Office programs Excellent communication skills with high level of English proficiency, both written and verbal, with an exhibited high level of professionalism. Extreme attention to detail, organizational and time management skills Skills: Knowledge of general office equipment- copier/fax/scanner, phone Problem-solving abilities Excellent customer service skills Must be able to understand and follow instructions Ability to work well with others in a collaborative team environment High energy level and able to work in a fast paced environment Computer Skills: Demonstrated knowledge of a variety of computer software applications in word processing, spreadsheets, document and database software (Outlook, Word, Excel, Adobe Acrobat). Work Environment: An employee in this position typically works in an office environment with controlled climate. Outside office travel is limited. Physical Demands: While performing the duties of this Job, the employee is regularly required to sit and work with computer systems for extended periods of time. The employee is occasionally required to lift up to 20 pounds. The vision requirements include: ability to adjust focus, distance vision and close vision.

SBM Management is looking to hire an Equipment Tech to join their team! This position is responsible for helping to ensure a clean lab environment, report any lab room or facility problems, clean and organize lab facilities, glass washing tasks, keep daily log of duties as required, perform other related duties as required and request cleaning materials as needed. Keep assigned areas clean and in an orderly condition. Work successfully with co-workers, customers, contractors, & others. Understand and follow instructions, both verbal and written. Understand instructions for task using basic communication skills. Responsibilities * Comply with safety rules, policies, and procedures. Stops at risk behavior of others and self. * Perform work assignments in a team with other employees. * Perform repetitive tasks. * Maintain clean work area. * Take direction and respond to supervision. * Communicate with lead, supervisor, co-workers, managers, and customers in a professional manner. * Support shift lead in completing punch-list items. * Use proper personal protective equipment. * Present a professional appearance and conduct. * Understand customer service and satisfaction. * Understand reporting systems and the environment. * Perform repetitive tasks in a GMP environment * Perform sanitization duties to maintain a GMP controlled environment * Consistently follow all customer and SBM SOP's and procedures * Respond to customer requests in a professional manner * Fully train in area job functions for specific shift assignment and area classification including walls, floors, windows, wipe-downs, maintenance issue reporting, and shut-down cleaning. * Complete daily FN logs accurately and completely * Must be trained and be certified in correct gowning procedures for assigned area. * Complete all basic training modules and annual qualification trainings per customer Standard Operating Procedures. * Complete all safety certifications including chemical safety. * Available to act as area fill-in in the event of general staff shortage. * Supports shift lead in completing work orders and internally identified items for assigned area. * Maintain logs and schedules. Examples of tasks include but are not limited to: * Setup and visual inspection of washer racks and associated washer. * Monitor CIP 100 and 200 levels and changing out of CIP 100 and CIP 200 drums as needed. * Loading soiled parts onto the washer racks per SOP * Programming of washer with appropriate Cycle # and starting washer inspecting and unloading clean parts from the washer. * Bagging and/or covering clean parts. * Printing wash labels for bagged/covered clean parts. * Storing/delivering of clean parts. * EUR documentation. * Assembling small parts equipment. * Preparation and Assembly of Production Kits. * In Process Tag documentation, if applicable. * Kanban parts. * Filter installation. * Operation of the Palltronic Filter Integrity Tester. * Setup and visual inspection of autoclave prior to use. * Daily/weekly maintenance (Bowie and Dick, Vacuum Hold Test). * Loading of parts/equipment for sterilization. * Unloading of parts/equipment. * Storing/delivering of sterilized parts. * EUR documentation. * Stocking of General Supplies (IPA, bleach, crew wipes, gloves, pipe covers, conical tubes, nova septum bags, etc.). * Stocking of COP parts (gaskets, clamps, caps, bleed caps, reducers, etc.). * Transport of empty and full biobag totes to appropriate Manufacturing areas. * Transport of parts/equipment in and out of manufacturing area(s), as required. * Building single use assemblies. * Inventory management of small parts. * Transport of buffer and media totes up to 1000L. * Retrieval and transport of used materials (empty totes, used filters, other plastics and trash). * Equipment setup: CIP, SIP, Process (limited). Qualifications * Experience in aseptic or GMP/regulated manufacturing. H.S. diploma or GED or equivalent combination of training and experience. Completed all safety, environmental and task training certifications. * Ability to read and interpret documents such as safety and environmental rules, equipment operating and maintenance instructions, and procedure manuals. * Ability to speak effectively to customers, co-workers, contactors, and team members. Very good communications and decision-making skills. * Ability to read blueprints and/or other technical documents a plus not required. English language proficiency in reading and writing. * Ability to apply good judgment when carrying out instructions furnished in written, oral, or diagram form. * Ability to deal with problems involving changes in standardized procedures and situations. * Ability to learn the operation and care of equipment. Work is routine & repetitive. * Recognize and understand safety signs and building warning systems. * Understand safety requirements. Understand & meet company handbook expectations. * Required intermediate computer proficiency skills. * Required to have a valid driver's license, if driving own vehicle on business time or company vehicle. * Will also be required to have proof of vehicle registration and insurance. * Cross training responsibility trough out the facility from all line level staff perspective. Line level - Glass wash, Janitorial, Disposal, shipping and receiving or any other soft services. Shift:67:00am-3:30pm; Sat-Mon & Wed-Thurs Compensation: $14.50-$15.50 per hour SBM Management Services, LP and its affiliates are proud to be equal opportunity workplaces. We are committed to equal employment opportunity regardless of race, sex, color, ancestry, religion, national origin, sexual orientation, citizenship, age, marital status, disability, gender identity, Veteran status, or other legally protected status.