Sonoco jobs in Winchester, KY - 137629 jobs

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Gainesville Employment Status: Hourly Full-Time Function: Supply Management/Purchasing Pay Range: ($33,639.00 - $50,458.00) Target Bonus: % Req ID: 27317 Summary Responsible for pulling, weighing, preparing and completing documentation for customer orders which are to be delivered by commercial trucker. Load/unload truck shipments. Warehouse received material and finished product in proper location. Support other departments to retrieve and replace inaccessible stock as needed. Key Deliverables Correctly pulled/boxed/prepared customer orders Work environment cleanliness, and organization No safety incidents or accidents Well maintained packaging and shipping supplies Key Accountability Metrics Satisfactory ISO and QC audits Monthly Customer Complaint Report Performance appraisals Key Responsibilities and Essential Functions 20% Pick and Pack Customer Orders Picks orders which are to be delivered by commercial trucker based on customer order and completes required documentation. Prepares pulled orders and places in holding area for truck pick up. 40% Load/Unload Shipments - Warehouse Material and Product Loads and unloads truck shipments received through Distribution. Follows proper procedure to handle deliveries in order to facilitate entry into Harris inventory system. Warehouses received materials and finished product in proper Manufacturing or Distribution areas, recording location on appropriate documentation. 20%Other Departments Support Aids other departments by pulling and replacing inaccessible stock using forklift. 5% Follow Safety Regulations Works safely and supports safety within their team across the organization - as required. Participates in safety training and demonstrates a high regard for safety at all times. Wears PPE as required by safety regulations. 5% Maintain Quality Maintains quality by verifying that pulled product, packaged or not, meets Deliveries requirements and work procedures. 5% Complete Documentation Completes the following forms/reports as required by department procedures: • Deliveries • Returned Goods Authorization • Daily 5S Check Sheet • Daily Forklift Inspection • Packaging/Shipping Supplies Checklist • Packing List on incoming shipments 5% Support Department and Company Initiatives Works on cost saving projects, Six Sigma projects, and provides support for other team members and projects. Attends team meetings. Utilizes lean tools and techniques such as 5S and visual factory concepts in maintaining order and cleanliness. Performs additional tasks to support production as needed or directed by supervisor or management. Education and/or Experience Required - 2 or more years of related work experience and High school diploma or GED or equivalent combination of education and experience. Preferred - Experience related to distribution; some computer knowledge; forklift license. Core Competencies Required from Employees Maintains a Customer Focus - Demonstrating exceptional service to both internal and external customers giving high priority to understanding and satisfying the customer. Takes Ownership - Demonstrates a continuous drive to achieve superior results and takes responsibility for those results. Is a Team Player - Has the ability to collaborate effectively with others to achieve common goals. Recognizes situations in which team members need to work together to solve work tasks at hand. Uses Sound Judgment / Integrity - Takes action that is well-reasoned, which represents the best interest of the business. Achieves Quality Results - Flawlessly executes on objectives to ensure the long- term success of the organization. Key Knowledge, Skills, Abilities, and Qualities Required Qualities and Skills Initiative, flexibility, responsibility and independence, ability to multi-task, goal-oriented, teamwork, excellent communication skills, ability to handle projects of varying scope, attention to detail, respectful of others, and willing to share expertise with others. Language Skills Ability to read and interpret documents such as safety rules, specific customer requirements, procedures. Ability to communicate effectively with coworkers Mathematical Skills Ability to work with basic mathematical concepts. Reasoning Ability Ability to define problems collects data, establish facts, and draw valid conclusions. Ability to interpret technical instructions. Physical Demands of Position - See Physical Demands Form Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Our Inside Sales Engineer is supporting our High Voltage Maintenance business. HVM is an electrical engineering and testing company providing comprehensive testing, maintenance, and engineering services to a variety of industries including utilities, data centers, renewable energy, commercial and industrial industries. This position will report to the Area Sales Manager for covering HVM's Ohio Valley or Northeast territory and will provide sales and technical support for all the selling resources in that area. This role will assist in generating more business by following up on leads, assisting with proposals, performing joint sales calls with the area sales manager and/or local sales engineers, and supporting additional local technical sales and marketing efforts. RESPONSIBILITIES Provide support to our Operations and Outside Sales Engineers Make regular sales calls on existing accounts and establish contact with new accounts. Make effective customer presentations. Provide proposals or service contracts for HVM's services and repair work. Coordinate and schedule work with Service Center Manager and with customers. Promote sales through active participation in trade shows and professional societies. Work with Business Administrator to develop weekly invoicing and monthly status reports. QUALIFICATIONS Ability to read one-line electrical diagram/prints. Excellent communication skills, both written and verbal Excellent customer service, organizational, and analytical skills. Proficient in MS Office. Experience with CRM Management preferred. Valid Driver's License. EDUCATION AND CERTIFICATIONS Bachelors Engineering, Electrical or Mechanical Graduate of Electrical Technical School Military equivalent TRAVEL TIME REQUIRED 25% At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5.0 billion in revenue, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, O, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #HVM #LI-HR1

RESPONSIBILITIES Preparation of detailed material take-offs and quotations for large scale prestigious integration projects in diverse applications Assist in developing clear, concise, and technically sound tailored solutions for customer review and acceptance based on customer requirements and/or RFP's, ensuring proper scope and required technical specifications are met. Assist with equipment selections and technical calculations to meet requirements of various Vertiv products. Apply Trimble Accubid MEP software to provide comprehensive bid support. Maintain positive, progressive, and productive attitude toward plant targets and objectives regarding reliability, accountability, safety, integrity, quality, and productivity as a unified goal. Provide technical support to bid management teams. Analyze customer's technical specifications and one lines, apply appropriate structural, electrical, and mechanical estimation to meet the customers' expectations in a cost-effective and timely manner, and provide alternative solutions to optimize profitability while meeting customer needs. Other duties as required. QUALIFICATIONS Bachelor's degree in engineering, Electrical/Mechanical/Process Engineering preferred but not required. 4 + Years Industrial or relevant commercial/industrial installation/integration experience preferred. Experience in Trimble Accubid MEP (or similar estimating platform), technical scope review, and design-build process preferred. High level of technical knowledge with the application of electrical distribution and mechanical cooling systems. Excellent team player and demonstrated ability to perform and prioritize multiple, simultaneous tasks while maintaining excellent customer service. Strong understanding of data center infrastructure design objectives, performance factors, and physical requirements. Excellent communication skills, both written and verbal. Detail-oriented. Ability to work and multi-task in a fast-paced environment. Understanding of commercial/industrial infrastructure design objectives, performance factors, and physical requirements. Knowledge and experience with evaluating electrical single line diagrams (SLD), relay PLC schemes, and communication network diagrams (media & protocols). Knowledge and experience with evaluating process piping and refrigeration diagrams, associated control and communication network diagrams (media and protocols). Excellent problem-solving skills. TIME TRAVEL REQUIRED 5% or less The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $8.0 billion in revenue, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #LI-CM1 Same Posting Description for Internal and External Candidates

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: Min: 63,800 - Mid - 88,800 Bonus Plan:Profit SharingProfit Sharing % Req ID: 27257 What You Will Do As an Electrical Engineer, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Engineer solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Develop, design, and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and maintain National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education and Experience Requirements This position is posted as a range, candidates with varying levels of experience and qualifications are encouraged to apply. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Minimum requirements, Engineer II - Bachelor's degree in electrical engineering with 3+ years of professional relevant engineering experience. Experienced Professional - Has working knowledge and experience in own discipline Continues to build knowledge of the organization, processes and customers Performs a range of mainly straightforward assignments Uses prescribed guidelines or policies to analyze and resolve problems Receives a moderate level of guidance and direction Engineer III - bachelor's degree in electrical engineering with 5+ years of professional relevant engineering experience Senior "Go To" / Career Level Person - Has in-depth knowledge in own discipline and basic knowledge of related disciplines Solves complex problems; takes a new perspective on existing solutions Works independently; receives minimal guidance May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives Acts as a resource for colleagues with less experience May represent the level at which career may stabilize for many years Engineer IV - bachelor's degree in electrical engineering with 8+ years of professional relevant engineering experience. Lead/Specialist - Is recognized as an expert in own area within the organization Has specialized depth and/or breadth of expertise in own discipline or function Interprets internal or external issues and recommends solutions/best practices Solves complex problems; takes a broad perspective to identify solutions May lead functional teams or projects Works independently, with guidance in only the most complex situations Experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lead, coach and train a team, providing professional development through ongoing coaching. Safety is of the utmost importance; constantly promote safety throughout the work area and with your team. Responsible for ensuring proper scheduling to run production area. Motivate, train and help the team to optimize performance. Ensure compliance with company policies, and our established food safety programs. Optimize employee engagement through positive leadership. All other relevant duties related to the job of a supervisor. 2+ year leadership and/or supervisory experience required. Bachelor degree in Poultry Science, Animal Science, Business Management, or other related field of study preferred. Excellent interpersonal and communication skills. Proficient technology, computer, mathematical and analytical skills. General knowledge of plant operations, food safety regulations, OSHA guidelines, GMPs and HACCP. Sound work ethic, honesty and moral character.

The Sr. Technical Thermal Sales Engineer, Global Strategic Accounts (GSA) drives the sales of thermal management equipment by providing technical expertise and guidance. This position focuses on reviewing specifications, analyzing mechanical drawings, and collaborating closely with GSA Account Managers to help meet customer needs and drive business growth. RESPONSIBILITIES Review and respond to RFPs for Vertiv thermal management solutions, including specification analysis, mechanical drawing review, and assistance with initial equipment configurations. Support the development of concept thermal designs and provide technical input on product selection, sizing, and schematic layouts. Participate in virtual or in-person design reviews with customers and internal teams. Collaborate with cross-functional teams such as offering management, engineering, and sales to support product development and customer solutions. Prepare technical documentation and project-specific bid forms as needed. Contribute to account planning and customer engagement strategies by providing technical insights. Serve as the SME for Vertiv during customer visits and industry events as needed. Stay informed on industry trends, technologies, and materials to support continuous improvement and innovation. Provide feedback to product managers to help guide product enhancements and future development. Help to foster a culture of innovation and continuous improvement within the department. Provide training and mentorship to less experienced team members. MINIMUM QUALIFICATIONS Bachelor's degree in engineering, business, or related field of study (or equivalent combination of education and experience). 4-8 years of industry technical experience. Experience in leading/managing high profile projects. Technical knowledge of Vertiv's thermal management product portfolio. Deep market dynamics and industry knowledge. Proven track record of influencing engineering accounts. Experience working with sales offices. Salesmanship and self-confidence to deal with frequent, stressful customer relationship issues. Excellent sales presentation skills. Strong problem-solving skills and ability to translate technical challenges into actionable plans. PHYSICAL & ENVIRONMENTAL DEMANDS No special physical requirements. TIME TRAVEL REQUIRED 30-50% The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers. Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization.

Our Outside Sales Engineer is supporting our High Voltage Maintenance business. HVM is an electrical engineering and testing company providing comprehensive testing, maintenance, and engineering services to a variety of industries including utilities, data centers, renewable energy, commercial and industrial industries. This position will report to the Regional Sales Manager covering the Cleveland area and will provide sales and technical support for all the selling resources in that area. The Outside Sales Engineer is responsible for generating new business and maintaining relationships with existing key customers. RESPONSIBILITIES Make regular sales calls on existing accounts and establish relationships with new customers. Make effective customer presentations. Provide proposals or service contracts for HVM's services and repair work. Coordinate and schedule work with Service Center Manager and with customers. Promote sales through active participation in trade shows and professional societies. Work with Business Administrator to develop weekly invoicing and monthly status reports. EDUCATION AND CERTIFICATIONS Bachelor's Degree Engineering, Electrical or Mechanical Graduate of Electrical Technical School Military certification with at least 3 years of directly related work experience will be held as equivalent to the educational requirement. TRAVEL TIME REQUIRED Up to 75% within assigned Cleveland territory Company provided vehicle The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $6.9 billion in revenue, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. The anticipated salary range for this role in the Cleveland, OH locality is between $94,800 to $118,450 per year plus Sales Incentive Plan-salary ranges for other geographic localities may vary. Certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance and are role based. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. The role is eligible to participate in a comprehensive and competitive benefits program, including medical, dental, vision, disability, PTO, holiday pay, and 401k. Additional details about total compensation and benefits will be provided during the hiring process. #LI-HR1 #HVM

Responsibilities and Measurement Criteria with Time investment Needed on Each: (This will describe the overall core responsibilities of the role, decision making responsibilities etc.) Design and development of UPS subsystems/components in compliance with specifications, EMC/EMI requirements, and applicable standards. PCB design. Detailed analysis of UPS electronic subsystems/components, focusing on performance evaluation, design optimization, component selection and sizing, and control strategy. Collaboration in an interdisciplinary engineering environment (with embedded, test, and mechanical engineers) to define requirements, discuss trade-offs, participate in design verification, and ensure successful integration of single-phase UPS designs. Continuous improvement of existing designs, evaluation of application issues, and resolution of those issues in the design of new products. Evaluation of new technologies to enhance and implement them in new R&D systems and processes. Adherence to agreed-upon project timelines. Preparation of relevant technical reports. Qualifications: Required/ Minimum Qualifications: Master's degree or higher in Electrical Engineering with a focus on power electronics. Proficiency in medium-to-low power circuit topologies, principles of power electronic converters, and semiconductor devices. Additional / Preferred Qualifications: - Hands-on experience with PCB design and layout. Knowledge of electronic design practices for EMC compliance. Strong analytical skills combined with excellent problem-solving abilities and interpersonal communication. Experience in UPS and power module development is highly desirable. Physical & Environmental Requirements: - (To be used majorly for manufacturing jobs.) None Time Travel Needed: 10% OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #LI-CM1

Company: US3090 Sygma Illinois (The Sygma Network, Inc) Sales Territory: None Zip Code: 61834 Travel Percentage: 0 Compensation Range: $10.00 - $48.00 The compensation range provided is in compliance with state specific laws. Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors. You may be eligible to participate in the Company's Incentive Plan. BENEFITS INFORMATION: For information on Sysco's Benefits, please visit ************************* Are you looking for a place to call home? Stability? A Career? Come join the SYGMA Danville, IL Team and get paid what you're worth. Our Delivery Drivers run 2-4 routes per week, and average $94-97K per year. At SYGMA we value our people and take pride in offering our customers the best service in the industry. We place an emphasis on teamwork and are known for developing our top internal talent. Offering Paid Training and Top Earning potential. Our Formula to Success is simple Route Pay + Bonuses = SYGMA Top Dollars. JOB SUMMARY To serve our customers by safely and efficiently transporting products from the warehouse by driving a tractor trailer to various customers and properly delivering and unloading products according to customer invoices and company standards. Top Earners Make Up to $130,000! Highly Maintained Equipment - all automatics 10 Paid Holidays! Medical, Dental and Vision Insurance Benefits active on the 1st of the month after 31 days of employment. 401k and Sysco Stock Purchase Plan Drive both team and single routes Evening Dispatch, Sunday - Friday The More You Drive; The More You Earn! RESPONSIBILITIES: Unloads product from trailer, by hand or using a hand cart down ramps, stairs, or docks, in all weather conditions and places in designated customer storage areas according to customer specifications and company standards (e.g., handling product according to preferred work methods, scanning product as it is delivered into the store). Ensures all paperwork is completed according to established company and governmental guidelines (e.g., DOT electronic or manual logs, inspections, company vehicle maintenance reports and pre- and post-trip reports are completed accurately and submitted on a timely basis, ensures all invoices are accurate and turned in daily and all damages and shortages are reported promptly). Ensures all food safety protocols are met according to established guidelines (e.g., proper temperatures are maintained in the delivery vehicle, product is inspected for visible damages prior to delivery, product is delivered and stored to prevent cross contamination) and maintains sanitary conditions in tractor and trailer; assists with maintaining sanitary conditions in the warehouse and yard. Develops and establishes good relationships with customers by providing excellent and courteous service with clear communication. Other duties as assigned by Management. REQUIRED MINIMUM EDUCATION/EXPERIENCE: High school diploma/GED/equivalent degree, plus 1 year of tractor trailer driving experience preferred. Completion of a tractor trailer driving school will be accepted instead of, or in addition to a high school diploma. CERTIFICATIONS AND/OR TECHNICAL REQUIREMENTS: Valid Class A Commercial Driver's License. Must be insurable to operate a vehicle as a condition of initial and continued employment. KNOWLEDGE, SKILLS, AND ABILITIES: Knowledge of: DOT regulations; Hazmat guidelines; Safe lifting and delivery practices. Skill in: driving over long distances, over a variety of terrains and in varying weather conditions, communicating with customers; solving problems; delivering products. Ability to: drive a tractor-trailer unit both in the day and at night, remain alert and aware of surroundings; meet or exceed minimum productivity levels established by the Company; handle hazardous materials and food and restaurant items that are frozen, dry and refrigerated; operate a 3 axle tractor, 45' - 48' trailer, straight truck, on board computer, key pad and a 2 wheel hand cart Perform basic math functions (e.g. add, subtract, multiply, divide); effectively plan and organize work activities independent of direct supervision; solve problems. Ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. While performing the duties of this job, the associate is regularly required to sit, talk, and hear. The associate is frequently required to lift, push, or move product that weighs up to 50 pounds by hand and push/pull up to 250 pounds of product with a 2-wheeled hand cart down a ramp and into the customer's storage areas; climb in and out of a tractor and trailer; reach to stack and unstack pallets and hand cart; bend and twist while loading and unloading product, and retrieving items from trailer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an associate encounter while performing the essential functions of the job. While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate usually works an overnight schedule, including weekends, holidays, overtime, on-call and starting at various times are required to successfully meet customers' needs. The associate is occasionally exposed to high, precarious places, fumes, or airborne particles. The noise level in the work environment is usually moderate. Overtime hours, working weekends and holidays, and starting at various start times are required to successfully meet customers' needs. NOTICE: The above statements are intended to describe the general nature of the environment and level of work being performed by this job. This in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job-related duties requested by his or her supervisor. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. This supersedes prior s. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity. EEO/AA Employer BENEFITS INFORMATION: For information on Sysco's Benefits, please visit ************************* HOW WE PROTECT OUR ASSOCIATES COVID-19 Precaution(s): Personal protective equipment and masks provided Temperature screenings Social distancing guidelines in place Sanitizing, disinfecting, and cleaning procedures in place OVERVIEW: Sysco is the global leader in foodservice distribution. With over 57,000 associates and a fleet of over 13,000 vehicles, Sysco operates approximately 326 distribution facilities worldwide and serves more than 625,000 customer locations. We offer our associates the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We're looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates. OVERVIEW: Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations. We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We're looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

Electrician MANSFIELD NIGHT ELECTRICIAN Our Night Electrician role offers a challenging, diverse and exciting opportunity to become part of our Maintenance team. In general, all Electrician roles are required to repair, install, replace, program, and test all electrical circuits, and equipment. Periodically perform or assist others in routine to moderately complex repairs or installation of automatic electrical and electronic controls. What you will do: Test electrical systems and circuits in electrical wiring, equipment or fixtures Inspect electrical systems, equipment or components to identify hazards, defects or repair Troubleshoot, program and upgrade Programmable Logic Controllers (PLC) Work with vendors to identify needed parts and recommend to Supervisor Understand and update instrumentation loop diagrams, E & I drawings, blueprints and schematics Program AC & DC variable speed drivers Update power distribution system, MCC and switch gears Install electrical equipment What you need to be successful: High School Diploma or GED Detailed and accuracy oriented Understanding of AC and DC control circuits Ability to read and interpret electrical schematics and wiring diagrams; have knowledge of 3 phase motor circuits, MCC's, power distribution and lighting circuits Ability to work outdoors in all temperatures in loud, high volume environments performing physical tasks throughout the shift Ability to perform the essential functions of the position which includes walking, standing, sitting, climbing stairs, bending and lifting-up to 50 pounds, climbing ladders, work in elevated work areas and tight close spaces Pass a basic written, oral and or visual electrical exam Offers of employment are contingent upon successful completion of a pre-employment background check, drug screen test and physical Preferred Skills: Proven troubleshooting skills; troubleshooting and tuning of PID loops; Pneumatics and hydraulics Allen Bradley family of PLC's and Powerflex drives and corresponding software Scanning and Optimization systems within the Lumber Business (Baxley, USNR) Process Network Communication Systems and Components-Ethernet & Fiber Optic Basic network topography and infrastructure What will make you stand out: Ability to perform all tasks in accordance with West Fraser safety policies and procedures to include performing safety observations, operate equipment according to safe work procedures and follow Zero Energy procedures. Must be willing to perform all job assignments in an effective and timely manner with minimal supervision Recognize and support our team culture, communicating effectively with all team members Ability to work nights, rotating shifts, holidays and weekends; ability to work overtime and willing to be on-call 24/7 Have 4-5 years of Electrician work experience in Industrial/Manufacturing environment Outstanding benefits package including: Benefits starting Day 1 Competitive starting pay On-the-job training A culture that strongly believes in promoting from within Medical, Dental & Vision 401K with company match and additional retirement contribution Employee Stock Purchase Plan Life Insurance Disability Insurance Paid vacations and holidays Apply: If you are ready to build your career in a company that thrives on growth, a safe work environment, rewarding work, challenge, and opportunity, come build your career with us at West Fraser: ******************************************************** We thank all candidates for their interest; however, only those selected for an interview will be contacted. Please apply through our online application process. Be sure to attach your resume to your online profile as resumes will not be accepted at the site. No phone inquiries, please. West Fraser is a diversified wood products company producing lumber, OSB, LVL, MDF, plywood, pulp, newsprint, wood chips, and energy with over 60 facilities in Canada, the United States, and Europe. We are the largest lumber producer in North America, a leading global manufacturer of wood-based panels, and the world's largest producer of oriented strand board (OSB). We are a growing company, believe strongly in promoting from within, and pride ourselves on providing a challenging environment with continuous development. The successful candidate should be interested in future growth opportunities within the company West Fraser is an Equal Opportunity Employer M/F/V/D & Drug-Free Workplace (DFW) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Planning Manager is responsible for overall site production operations. Creates a work environment which promotes safety, quality, delivery, and cost-effectiveness. Effectively develops teams that can achieve corporate improvement objectives. Accountable for all aspects of plant production performance while ensuring objectives are attained in a cost-effective manner. Drives best practices through the organization and leads process improvement. Why work at MCC: Comp: $85,000-100,000k/yr This is a Dayshift Position Generous benefits package including medical, dental, vision, disability, life insurance and 401(k) Paid Holidays: New Years, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating holidays Responsibilities: Directly, and through delegation, coordinates activities required to assure safety, quality, delivery, and cost meet specified targets. Assures the compliance of behavior-based safety initiatives and continuously improves safety performance. Executes quality control plans for compliance to standards and drives variation reduction within the process. Assesses on-time delivery performance and develops actions to improve and sustain high level of performance. Holds direct responsibility for managing cost by effective management of labor, overtime, and expenditures. Determine staffing requirements weekly and re-deploy resources during the week as needed to address any shifting staffing needs or changes in priorities and scheduling. Reviews and analyzes production reports to determine root causes of variance from budget, and develops and executes corrective actions, using structured root cause analysis, MDI and Policy Deployment methodologies. Using Lean principles, form teams and involve people to improve productivity, decrease lead times, reduce waste and attain customer quality requirements. Reviews and analyzes production reports to determine root causes of variance from budget and develops and executes corrective actions. Recommend and initiate cost reduction programs centered around capital improvements where ROI and pay back criteria are favorable. Promotes, prepares, and participates in kaizen activities. Sustains results. Facilitates the execution of daily Gemba walk by assuring the proper utilization of hour-by-hour, SQDC boards and War Room tools. In conjunction with Human Resource Manager, coordinates appropriate “required to operate” and “required on roles” staffing levels. Directs the efforts of plant supervision to ensure the consistent application of human resource policies, procedures, and plant rules. Assures adherence to safety accountability guidelines. Coaches and mentors team members to assure their ongoing development Stays abreast of new trends and developments in methods, techniques, equipment, tools, materials, and supplies, which might be incorporated into the production process to increase efficiency or better use of resources. Researches and recommends capital equipment purchases. Participates in special projects and performs other duties as assigned. Qualifications: A hands-on leader that is a role model with high integrity, positive influence, and strong business acumen that embraces change, possesses a continuous improvement mindset, and has a passion for exceeding customer and company expectations. Degree in Engineering, Industrial Technology or Business or equivalent 10 years of staff level leadership experience. Minimum of 7 years' experience in Operations and/or Lean Management. Printing industry experience is preferred. Experience in being a change agent in complex transformational activities. Significant experience in implementation of Lean principals as they apply to manufacturing operations. Ability to apply structured problem-solving methodologies to determine root cause of problems and provide effective countermeasures. Excellent communication skills Advanced excel skills Diversity & Inclusion: MCC fosters an inclusive culture that respects and embraces our teammates' diverse backgrounds and experiences, so that everyone can achieve their full potential here. We aspire for our company to truly reflect the diversity of our customers and the markets we serve. We are committed to equal opportunity for everyone, regardless of peoples' gender identity/expression, age, language, sexual orientation, ability, race, socioeconomic status, national origin or other characteristics. #LI-ML1 #appcast For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Req ID: 27647 Purpose Design, implement, and maintain embedded software components for use in end products. Continually improve development techniques in order to create software more efficiently and reliably. Apply engineering knowledge to provide creative software solutions for real world customer issues and use cases. Job Duties and Responsibilities Develop multithreaded controls with industrial Real Time Operating Systems and Embedded Linux using C and C++ languages. Developing software for communication with industrial automation networks (e.g. CAN, Ethernet/IP), Internet protocols (e.g. HTTP, FTP), and wireless (e.g. Wi-Fi and Bluetooth). Developing software for embedded graphical displays. Interact with key stakeholders including marketing, suppliers, customers, distributors, and sales engineers to drive new product innovation. Maintains records of all work in process and documents interim/final results in the applicable format; these include Project Definitions, Milestone Plans, ES Reports, Technical Reports, Project Tracking Progress Reports and presentations at meetings/seminar. Develop and refine automated test setups, frameworks, and methods for embedded systems, including unit tests, integration tests, and system-level test to support new product development, product evaluations, and competitive benchmarking. Coordinate activities of internal and external technical support personnel as required. Troubleshoot issues in development and production environments, ensuring rapid resolution and minimizing downtime. Reading and interpreting schematics and component data sheets. Assignments are broad in nature, requiring originality and ingenuity. Has appreciable latitude for unreviewed action or decision. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Basic Requirements Level II: Four-year Engineering degree is required and, Minimum of three (3) years Engineering experience. Level III: Four-year Engineering degree is required and, Minimum of five (5) years Engineering experience. Strong familiarity with embedded systems architecture, design considerations, and hardware-software interactions. Industry experience writing C for embedded platforms. Strong understanding of testing methodologies and frameworks for embedded systems Effective communication skills, with the ability to convey complex technical concepts to both technical and non-technical stakeholders. Ability to work independently and as part of a team. Excellent organizational skills. Ability to handle a constantly changing set of priorities. Initiative to take ownership of product designs. Possesses and applies a broad knowledge of principles, practices and procedures of field of specialization to the completion of difficult assignments. The selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Competencies Proficiency in C and C++ programming languages Knowledge of Real Time Operating Systems and Embedded Linux. Experience in developing software for industrial automation networks, internal protocols, and wireless communication. Professional experience with TDD, writing unit tests, automated testing, and continuous integration type frameworks. Familiarity with Azure DevOps and Agile development practices. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Perform work repairing electrical and electronic equipment in a manufacturing plant. Install, inspect, maintain and repair electromechanical and solid state electrical equipment. Perform high voltage switching and operate generators in support of operations. Lead a work party in performing maintenance or repair work. Record and document maintenance performed. All other relevant duties to the job. Electrical Certification from a recognized vocational education program required OR have completed an Electrical Apprenticeship Program. Knowledge and experience with methods, equipment and materials used in the electrical trade. Knowledge of electronic theory as applied to electrical and electronic circuits, wiring, and electrical equipment used in power generation. Knowledge and experience with Programmable Logic Control (PLC) units. Maintenance experience within a manufacturing environment required.

. Supervise immediate and short-term maintenance goals. Assign work orders and ensure completion of repairs. Perform lock out/tag out certifications on equipment. Recognize and reward Technicians, while counseling performance issues. Perform safety checks. Provide mentorship, motivation, training and professional development, helping your team to optimize their performance and growth. Assign work orders, and follow up ensuring completion. Manage and oversee required paperwork. All other relevant duties to the job. 3+ years supervisory experience within a manufacturing maintenance environment required. 5+ years maintenance experience in a manufacturing environment required; preferrably within a poultry manufacturing facility. Excellent leadship skills with ability to provide positive reinforcement.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 27753 Purpose Primarily a support role running multiple pieces of toolroom equipment to make parts to print. Job Responsibilities Maintain a high standard for safety, workmanship, product quality and productivity. Primarily a support role running multiple pieces of toolroom equipment to make parts to print. Proficiency in multiple machines and above average knowledge in one is expected. On occasion build, rework, maintain, and repair all forms of tooling using available equipment and resources. Work from design prints, sketches, sample parts and oral instructions. Personally possess basic inspection and machining tools to effectively perform your job. Determine the best method to manage and complete a project by a designated due date. Work as a team lead as well as a team member depending on the departmental workload. Effectively communicate with other personnel and educate apprentices in best practices. Maintain accurate documentation of tool modifications, repair, preventative maintenance and individual work performed throughout the shift. Work overtime or come in on off hours to satisfy production requirements. Safely use a tow motor, crane or jib hoist to move materials and tooling. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Job Requirements Completed a high school or post high school machinist program or demonstrated the ability to perform the aforementioned tasks. Proficiency in operating all common machining equipment, mills, lathes, grinders, etc. Ability to program computer controlled toolroom equipment Above average knowledge of computers Ability to Stick and TIG weld is a plus but not required. Use of all inspection measurement equipment standard in the tool making industry Time management skills and the ability to work to deadlines in a fast-paced environment. Read, understand and follow specifications and prints. Good communication skills. Moderate hand dexterity is required for this position. Mainly first shift schedule, but available to work second shift, overtime and weekends as required. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Coldwater Req ID: 28002 Job Responsibilities Position Summary: We are seeking applicants for a Trainee position which is an entry level Skilled Trades employee to perform general machine shop cleanup duties. This position is an opportunity to gain experience in a machine shop setting for an individual who would potentially grow into a member of LEA Coldwater's Apprenticeship Program. Role qualifications: • Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives. • Be aware of the relevance and importance of their activities and how they contribute to the achievement of quality objectives. Position responsibilities: • Ensure cleanliness and organization of the manufacturing shop • Assist with set up and tear down of any company wide meeting • Perform other duties as assigned • Work well with helpers, Engineers, Management, and support functions Job Requirements Essential skills and experience: • Pending or earned High School Diploma • Vocational training in Machine Trades or equivalent preferred • Demonstrated aptitude for mechanical trades and applied mathematics • Demonstrated eagerness to work and learn metalworking • Basic mechanical knowledge of machines and tools • Commitment to company values. • Educational training and experience requirements may be modified at the Managements Team's discretion. Behavioral Traits: • Highly self-motivated and driven • Dependable • Organized • Active listener • Forward thinking attitude and the continual need to refine and polish work, by seeking to exceed customer and Company's expectations Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Collaborate with Complex Safety Manager and facility management to develop an Emergency Action Plan and serve as one of the primary contacts for any facility injury and incident notification, investigation, and case management along with the Complex Safety Manager. Maintain a written log of safety inspection activities, reports, and correspondence. Coordinate and monitors schedule updates, invoices, and submittals. Supervise Medical Offices and Medical/Safety Staff and provide reports to Complex Safety Manager. Coordinate with vendors regarding annual training and inspections. Create work schedules for the Medical/Safety department. Complete annual BLS reporting and maintain OSHA logs. Calculate weekly and monthly Dart Rates. Review all Incidents and provide presentations and reports to Complex Safety Manager. Conduct OSHA incident reporting and supervise OSHA site inspections. All other relevant tasks as needed. Bachelor Degree in an environmental or health related science preferred. Knowledge of OSHA regulations and other general industry safety practices. 3+ years of safety experience within a similar work environment required. OSHA 10 and OSHA 30 certifications preferred. Excellent interpersonal communication skills. Proficient technology and computer skills, including MS Office based programs.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Req ID: 27996 Scope Responsible for the timely and proper lubrication and maintenance of mechanical, pneumatic, and hydraulic equipment. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader. Reports directly to the department Foreman. Responsibilities Primary duties to perform this job include: Performs all task under limited supervision. Provides training and assistance to less experienced Oilers. Leads, organizes, maintains, and ensures completion of a lubrication schedule. Assumes ownership of work task and demonstrates initiative to get work completed. Evaluates and recommends equipment lubrication schedule per experience and manufacturers recommendations. Order and maintain oils, greases, and solvents necessary to complete task. Assist with keeping neat and orderly records on work performed. Work with Engineering, Production Team Leads, Foreman, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, may be required to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Foreman. Quality Must understand the Company's Quality Policy and how it relates to this job. Must understand the relevance and importance of the quality activities and how they contribute to the achievement of the quality objectives. Environmental, Health & Safety (EHS) Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe manner and observe all company EHS Procedures. Follow safe equipment operating procedures and only operate equipment when guards are in place and in good condition. Know that the company EHS Procedures, Company Specifications, Work Instructions, Plant Rules and Regulations, Job Hazard Analysis (JHA), and Safety Data Sheets (SDS) can be accessed by supervision and are located at Security, and are available upon request. Immediately notify the Foreman of any safety hazard, equipment not operating correctly, or if there are any questions regarding EHS procedures. PERSONAL PROTECTIVE EQUIPMENT - Follow the personal protective equipment policy detailed in Plant Rules & Regulations EHS560 & EHS580. Skills, Aptitude and Abilities High School education or equivalent. Must have an advanced knowledge of proper industrial lubrication techniques and applications. Must have a basic knowledge of mechanical systems and the ability to understand hydraulic and pneumatic systems. Must have a basic ability to diagnose the root cause of a problem and adjust lubrication as required. Must have a basic level of knowledge and experience reading mechanical drawings and service manuals. Excellent attendance required. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be willing to continuously improve technical knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Training As directed by the department Foreman in conjunction with experienced personnel. The department Foreman shall ensure that the employee receives the following training at the appropriate times per the Maintenance Department Training Matrix. The department Foreman shall determine when an individual has completed the training and is qualified to assume these responsibilities. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

MRO Coordinator Wage: $28.64 Shift: 7am - 5pm (M-F) From a small family business to a multi-billion dollar global company, Sonoco has been changing the face of products and packaging since 1899 - all while keeping the heart of “People Build Businesses” alive. Our talented people are at the core of our growth, constantly reinventing the Sonoco wheel with brilliant solutions every year. Today we are a world leader in global packaging solutions with diversified operations in over 34 countries. We're extremely proud of our portfolio of brands, our achievements in sustainability and industrialization and the groundbreaking work accomplished by our people. Reporting directly to the Plant Engineer, as the MRO Coordinator you will be responsible for performing all purchasing and distribution tasks for products and services used to maintain and repair our machines. Safety, quality, productivity, and strong work ethic are important to the Sonoco culture. What you'll be doing: Storeroom Management Report to and take direction from maintenance department supervisor. Update inventory in the software for items received and issued. This includes tagging, labeling and organizing all spare parts. Receive in, inspect, tag and store in appropriate locations all purchased equipment and supplies. Stock shelves and stores area with purchased materials. Unpack, count and reconcile quantity/kind of materials received against what was ordered, making sure packing slip agrees with order and with what was received. Develop and maintain appropriate storeroom areas as needed. Maintain Storeroom to 5S Standards including daily housekeeping. Distribute and control material from locked and unlocked areas to employees and contractors. Ensure that safety rules are followed in the maintenance receiving and storeroom areas to prevent injuries. Develop and promptly distribute receiving reports to appropriate departments. Document and track purchasing and receiving. Maintain CMMS systems to improve asset performance, customer satisfaction, and plant profitability. Perform other record keeping for maintenance department, as needed. Insure compliance to Sonoco MSDS / SDS policies when bringing in new chemicals Locate correct parts for the Maintenance team and issue out Maintain and report daily a purchasing log of all purchases. Maintain MRO office to 5S Standards including daily housekeeping. Inventory/Purchasing Management Develop and maintain a comprehensive Cycle Count Program with daily counts. Assist outside vendors with inventories to ensure proper levels are maintained and work with outside vendors to monitor and control any consigned inventory. Meet with maintenance and production supervisors as required to review spare parts inventory, critical spares and scheduled work orders requiring parts or equipment. Research and identify parts and suppliers in support of maintenance needs. Prepare appropriate paperwork when materials are to be returned to vendors. Obtain multiple quotes on purchased items along with contracted work. Prepare requisitions and place purchase orders for spare parts replenishment. Perform reconciliation of purchasing card with required documentation. Review storeroom requisition report daily to ensure timely replacement of used material. Track supplier performance data such as price, delivery and accuracy in order to assist with routine supplier evaluation and / or selection. Maintain communication on status of orders placed / received. Preventive/Predictive Maintenance Administration Assist in work order generation and closure to ensure spare parts and labor hours are coded to capital equipment. The kitting of spare parts for scheduled work orders in addition to the management of common assembly kits. Participate in and support shutdown planning through parts identification and purchasing. Develop and utilize a customer feedback survey for storeroom and maintenance functions. Identify repair parts that meet capital funding requirements and develop appropriate paperwork for submission. Track and properly document capital expenditures to their appropriate budget accounts. Controls and distributes special tooling to maintenance and production personnel. Print work orders, purchase orders, preventive maintenance schedule and any other reports as needed. We'd love to hear from you if: Ability to prioritize tasks. Professional communication skills. Must be able to read, write, speak, and understand English. Strong organizational and time management skills. Ability to work with a computer and accurately enter data into spreadsheets or functional specific software. Including proficiency in MS Excel. At Sonoco Products Company, we offer a comprehensive total rewards package, including competitive pay and benefits. *Benefits listed below are for employees located in the U.S. Specific benefits and wellbeing programs may vary depending on your location (within the U.S. or global), or if you are a union employee. Benefits Medical, dental, and vision coverage for you and your dependents, including FSA and HSA options 401(k) retirement plan with company match Wellbeing tools and resources to support holistic health, including an Employee Assistance Program with a variety of services Paid time off and holidays to recreate, rejuvenate and care for the health of yourself and family Variety of company paid and voluntary employee-paid insurance plans including life, personal accident, and disability insurance Tuition reimbursement We are an equal opportunity employer, and we strictly prohibit and do not tolerate discrimination against employees, applicants or any other covered persons because of race, color, religion, national origin or ancestry, sex, pregnancy, sexual orientation, marital status, gender identity or expression, age, disability, genetic information, veteran status, or any legally protected characteristic.