Spray operator job description
Updated March 14, 2024
7 min read
Find better candidates in less time
Post a job on Zippia and take the best from over 7 million monthly job seekers.
Example spray operator requirements on a job description
Spray operator requirements can be divided into technical requirements and required soft skills. The lists below show the most common requirements included in spray operator job postings.
Sample spray operator requirements
- High School Diploma or equivalent.
- Previous experience in operating a spray machine.
- Ability to read and interpret technical documents.
- Ability to lift up to 40lbs.
- Comply with safety regulations.
Sample required spray operator soft skills
- Strong problem-solving skills.
- Good communication skills.
- Ability to work independently and in a team.
- Flexibility and adaptability.
Spray operator job description example 1
AAR spray operator job description
**Title:** Operator, Thermal Spray
**Location:** United States-Florida-Miami
SUMMARY
Machine Operator (Thermal Spray/HVOF) to perform the full range of thermal spray operations while insuring quality of work performed meets customer expectations.
ESSENTIAL DUTIES AND RESPONSIBILITIES
Receive work instructions for the job and ensure that the parts have been properly masked; in some cases, masking, blasting or blending may be required
Pull and maintain tooling and materials required for thermal spray application
Perform the setup of equipment, tooling and materials for each project with minimal supervision
Set the parameters and pressures to operate the thermal spray equipment; enter basic instructions to the robotic equipment and performs limited applications
Apply plasma thermal spray coating to the full range of jobs and aircraft parts
Apply HVOF spray coating to the full range of jobs and aircraft parts
Complete work instruction sheet to record the work performed
Assist with other duties as directed by the department supervisor
Maintain good housekeeping standards throughout department and work facility
Personally, observe safety and security procedures and proper use of equipment and material
Actively promote safety process and report any safety issues to proper channels for action
CORE COMPETENCIES
Dependability: personally responsible, completes work in a timely manner, and performs tasks accurately
Computer skills: high level of computer literacy is required
Creativity: makes constructive suggestions and creates novel solutions to problems; evaluates new technology as potential solutions to existing problems
Communication: excellent interpersonal and oral and written communication skills
Initiative: plans work and carries out tasks without detailed instructions, prepares for problems or opportunities in advance, undertakes additional responsibilities
Teamwork: works harmoniously with others to get a job done, responds positively to instructions/procedures, and works well with others.
Qualifications:
QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED) required. Must have a minimum of 3 year related experience and/or training. Aerospace experience preferred (FAA, ISO, Nadcap understanding) Experience with ABB robotics programming Experience with Praxair consoles preferred Experience using Micrometers, Calipers and other measuring devices Language/Communication skills: read, interpret and write documents in English PHYSICAL DEMANDS/WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Maneuvers in, around, under, and about factory and/or laboratory equipment on a regular and continuous basis Must be able to lift and carry up to 50 pounds and comply with OSHA standards Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach and move about the facility. The environmental characteristic for this position is a manufacturing setting and is occasionally exposed to heat, cold, and wet. Candidates should be able to adapt to a traditional manufacturing environment. While performing the duties of this job, the Team Member is occasionally exposed to moving mechanical parts, fumes or airborne particles, toxic or caustic chemicals. Use of job specific protective PPE is mandatory. The noise level in the work environment is low to moderate.
We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
**Location:** United States-Florida-Miami
SUMMARY
Machine Operator (Thermal Spray/HVOF) to perform the full range of thermal spray operations while insuring quality of work performed meets customer expectations.
ESSENTIAL DUTIES AND RESPONSIBILITIES
Receive work instructions for the job and ensure that the parts have been properly masked; in some cases, masking, blasting or blending may be required
Pull and maintain tooling and materials required for thermal spray application
Perform the setup of equipment, tooling and materials for each project with minimal supervision
Set the parameters and pressures to operate the thermal spray equipment; enter basic instructions to the robotic equipment and performs limited applications
Apply plasma thermal spray coating to the full range of jobs and aircraft parts
Apply HVOF spray coating to the full range of jobs and aircraft parts
Complete work instruction sheet to record the work performed
Assist with other duties as directed by the department supervisor
Maintain good housekeeping standards throughout department and work facility
Personally, observe safety and security procedures and proper use of equipment and material
Actively promote safety process and report any safety issues to proper channels for action
CORE COMPETENCIES
Dependability: personally responsible, completes work in a timely manner, and performs tasks accurately
Computer skills: high level of computer literacy is required
Creativity: makes constructive suggestions and creates novel solutions to problems; evaluates new technology as potential solutions to existing problems
Communication: excellent interpersonal and oral and written communication skills
Initiative: plans work and carries out tasks without detailed instructions, prepares for problems or opportunities in advance, undertakes additional responsibilities
Teamwork: works harmoniously with others to get a job done, responds positively to instructions/procedures, and works well with others.
Qualifications:
QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED) required. Must have a minimum of 3 year related experience and/or training. Aerospace experience preferred (FAA, ISO, Nadcap understanding) Experience with ABB robotics programming Experience with Praxair consoles preferred Experience using Micrometers, Calipers and other measuring devices Language/Communication skills: read, interpret and write documents in English PHYSICAL DEMANDS/WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Maneuvers in, around, under, and about factory and/or laboratory equipment on a regular and continuous basis Must be able to lift and carry up to 50 pounds and comply with OSHA standards Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach and move about the facility. The environmental characteristic for this position is a manufacturing setting and is occasionally exposed to heat, cold, and wet. Candidates should be able to adapt to a traditional manufacturing environment. While performing the duties of this job, the Team Member is occasionally exposed to moving mechanical parts, fumes or airborne particles, toxic or caustic chemicals. Use of job specific protective PPE is mandatory. The noise level in the work environment is low to moderate.
We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
Post a job for free, promote it for a fee
Spray operator job description example 2
Raytheon Technologies spray operator job description
Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it.
So, calling all curious.
Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future.
Innovation through diversity of thought. At Pratt & Whitney, we believe diversity of thought enables creativity, innovation, and a foundation for inclusion. By fostering an inclusive culture, we accept a shared accountability and responsibility to recognize, sponsor, coach, hire and promote talent equally. We welcome our employees to be their whole - best - selves at work because trust, respect and integrity, are a part of our DNA.
At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?
Pratt & Whitney PSD provides the aviation industry with capabilities for specialized repair of gas turbine engine cases and components.
This is a second shift opportunity. Days/hours are Monday - Friday; 4:00 pm to 12:30 am. Shift earns 8% shift premium after training period on 1st shift. Overtime opportunity is available after training period.
This position entails operating plasma spray machinery to build up coating and perform plasma preparation including masking and blasting in an aerospace case repair facility.
Key Responsibilities:
+ Read blueprints, drawings, manuals, specifications to determine requirements.
+ Prepare parts for plasma coating.
+ Set up and operate grit blaster.
+ Set up and operate plasma equipment.
+ Plasma coat to specifications outlined in work instructions.
+ Inspect parts to verify conformance with specifications.
+ Complete required paperwork.
+ Maintain clean work environment
Basic Qualifications:
+ Technical aptitude and desire to learn new skills is essential to this role. Training is provided on-site.
+ Ability to read and interpret work instructions.
+ High school diploma or GED
+ US Citizenship due to government contracts
What is my role type?
In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is:
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.
Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility.
Pratt & Whitney in Springdale, AR is a FAA regulated facility and as such under the U.S. Departments of Transportation's Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA's regulation 14 CFR part 120, as well as 49 CFR part 40.
Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
So, calling all curious.
Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future.
Innovation through diversity of thought. At Pratt & Whitney, we believe diversity of thought enables creativity, innovation, and a foundation for inclusion. By fostering an inclusive culture, we accept a shared accountability and responsibility to recognize, sponsor, coach, hire and promote talent equally. We welcome our employees to be their whole - best - selves at work because trust, respect and integrity, are a part of our DNA.
At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?
Pratt & Whitney PSD provides the aviation industry with capabilities for specialized repair of gas turbine engine cases and components.
This is a second shift opportunity. Days/hours are Monday - Friday; 4:00 pm to 12:30 am. Shift earns 8% shift premium after training period on 1st shift. Overtime opportunity is available after training period.
This position entails operating plasma spray machinery to build up coating and perform plasma preparation including masking and blasting in an aerospace case repair facility.
Key Responsibilities:
+ Read blueprints, drawings, manuals, specifications to determine requirements.
+ Prepare parts for plasma coating.
+ Set up and operate grit blaster.
+ Set up and operate plasma equipment.
+ Plasma coat to specifications outlined in work instructions.
+ Inspect parts to verify conformance with specifications.
+ Complete required paperwork.
+ Maintain clean work environment
Basic Qualifications:
+ Technical aptitude and desire to learn new skills is essential to this role. Training is provided on-site.
+ Ability to read and interpret work instructions.
+ High school diploma or GED
+ US Citizenship due to government contracts
What is my role type?
In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is:
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.
Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility.
Pratt & Whitney in Springdale, AR is a FAA regulated facility and as such under the U.S. Departments of Transportation's Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA's regulation 14 CFR part 120, as well as 49 CFR part 40.
Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
Dealing with hard-to-fill positions? Let us help.
Resources for employers posting spray operator jobs
Average cost of hiring
Recruitment statistics
How to write a job description
Examples of work conditions
Spray operator job description FAQs
Ready to start hiring?
Updated March 14, 2024
Updated March 14, 2024