SSE plc jobs in Saint Louis, MO - 2156 jobs

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. MPC is an industry leading, dynamic company that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. MPC provides compensation, incentives and benefits that allow our employees to build careers - not just work a job. “2022 & 2023 Top Companies for Women to Work For in Transportation” Awarded by the official magazine of the Women In Trucking Association. Job Description Marathon Petroleum Company LP (MPC) has a position available for a professional, local (home daily), transport driver. Our drivers are responsible for the safe and efficient delivery of petroleum products from various loading locations to various delivery points and customers. Transport drivers independently follow policies, procedures, and standards. Marathon transportation has one common vision: no accidents, no injuries, while being good stewards of the environment. Inclusive Benefits. Local Routes. Safety First. Outstanding Training. Click Here for more reasons why MPC is the last stop for many drivers. Benefits Hourly Rates: $30.72 - $32.47 Insurance: Health/Dental/Vision coverage available day 1 Retirement: 401k with company match up to 7% Pension: Company funded pension plan up to 11% Annual bonus: Eligible for company sponsored annual bonus. Paid parental leave. Education reimbursement For full benefit details visit ********************* Minimum Qualifications Active Class A Commercial Driver's License Must maintain a satisfactory driving record and provide consent to company for review of driving record(s). Must register with FMCSA Drug & Alcohol Clearinghouse and provide consent to company for review of clearinghouse records. Must be able to drive interstate. Active CDL Endorsements: Hazardous Materials and Tank Vehicle (Required) License - Restrictions: Operate manual and/or automatic transmission. Shift Requirements Must be able to work up to a 12-hour AM/PM shift. Must be able to work hours beyond schedule Job Responsibilities Perform pre-trip inspection on equipment in alignment with MPC policy and Department of Transportation (DOT) regulations. Check tank truck/trailer or tractor/trailer for general operating requirements and make sure that all required equipment is available and in good operating condition. Note inspection and deficiencies on the pre-trip inspection form. Drive a tank truck/trailer or tractor/trailer to transport product in a safe, efficient, and professional manner. Obey all applicable federal, state and local laws. Follow MPC and site specific standard operating procedures for the loading and offloading process. Perform post-trip inspection on equipment in alignment with MPC policy and DOT regulations. Complete all regulatory and customary paperwork. Ensure equipment is ready for the next shift. Communicate all incidents, including safety and environmental concerns, according to company procedures. Report all equipment issues in a timely manner. Follow, maintain, and adhere to all safety rules and operating procedures, including all DOT regulations. Physical Requirements Must be able to work outside in all types of weather conditions. Must be able to work on elevated spaces: 30+ feet on graded elevation. Must be able to frequently lift, carry, push, and/or pull 50-65 lbs. Must be able to sit for extended periods of time. Must be able to grip a steering wheel for extended periods of time. Screening Requirements Must maintain a satisfactory driving record and provide consent to company for review of driving record(s). Must pass required drug and alcohol screening(s). Must complete DOT physical and maintain current medical card. Must pass three-year DOT safety background check and seven-year criminal background check. Must pass pre-trip exam and road test to demonstrate proficiency operating required equipment. #TR As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Garyville, Louisiana Additional locations: Job Requisition ID: 00019983 Location Address: 4663 W Airline Hwy Education: Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at ***************************** hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

Junior Supply Planner Pay Rate: 26.00 per hour Duration: 1 to 1.5 Years (Temporary) Shift: Tuesday - Friday (8 AM - 4 PM) and Monday (7 AM - 3 PM) Position Overview Randstad is seeking a detail-oriented Junior Supply Planner to join our RC Planning team. This role is critical to ensuring 100% On-Time In-Full (OTIF) delivery and flawless execution of ERP processes and reporting. You will be responsible for managing inventory levels, executing purchase and transfer orders, and providing advanced data insights to support business results. Key Responsibilities Planning & Execution: Execute the creation of Purchase Orders (PO) and Transfer Orders (TO) within the ERP system. Data & Reporting: Create and maintain complex reports using Excel (Advanced) and Power BI (Advanced) to drive business decisions. Operational Leadership: Lead daily team meetings and connections to ensure alignment on priorities. Inventory Management: Focus on Distribution Requirements Planning (DRP) to optimize service levels, cash flow, and costs. Troubleshooting: Identify and resolve issues within the ERP system related to order creation and inventory flow. Qualifications Basic Requirements (Must-Haves): Education: Bachelor's Degree Experience: Proven experience in Planning, specifically Inventory or DRP planning. Industry: Must have experience in the FMCG (Fast-Moving Consumer Goods) industry. Technical Skills: Advanced proficiency in Excel and Power BI. Availability: Ability to work a hybrid schedule with at least 3 days in the St. Louis office. Preferred Qualifications: APICS Certification. Experience in Production Scheduling and MRP Planning. Strong problem-solving skills and the ability to manage ambiguity. Performance & Culture Success Metrics: Performance is measured by service level, cash optimization, and cost management. First 90 Days: Your primary focus will be mastering internal processes, systems, and execution workflows. Team Culture: You will join a collaborative team of six planners during a period of organizational growth and change. Career Path: This role offers the potential to convert into a Full-Time (FT) Planner position

Estimated salary range: $100,000 to $160,000 per year, depending on experience, certifications, project requirements, location, and internal alignment/level ★ Enjoy profit sharing and excellent health benefits through the Federal Employee Health Benefits (FEHB) program Doyon Government Group (DGG) provides design-build and general construction services nationwide for government and military facilities. DGG is seeking an experienced Construction Quality Control Manager (QCM) to oversee quality programs on U.S. Army Corps of Engineers (USACE) or Naval Facilities Engineering Command (NAVFAC) federal projects. Key Responsibilities Develop and manage the project Quality Control (QC) Plan per contract requirements Perform daily quality inspections and coordinate required testing Coordinate with Superintendents, SSHOs, and subcontractors on new Definable Features of Work (DFOW) Review and manage submittals, RFIs, and quality documentation Track and resolve deficiencies through corrective actions and follow-up inspections Maintain daily reports, inspection logs, and quality records Qualifications 7+ years of professional construction experience Requires 3+ years serving as a QCM on USACE or NAVFAC construction projects Experience implementing a three-phase Quality Control (QC) plan Strong knowledge of contract specifications, quality control plans, and federal construction requirements Must be proficient with USACE RMS, NAVFAC QCS, or similar reporting software Must be proficient in Microsoft Office (Outlook, Excel, Word, Teams) and able to use independently Strong communication, documentation, and leadership skills Join Doyon to deliver safe, compliant, high-quality federal construction projects! Doyon Government Group is an equal opportunity employer and complies with all applicable non-discrimination obligations, including VEVRAA and Section 503 of the Rehabilitation Act.

Contract Details: 3-5 month contract to start, with potential for extension and opportunities to apply for permanent positions. We are seeking highly detail-oriented and independent individuals to join our Centralized Staffing Office and Perioperative Services teams. These roles are critical to the smooth, day-to-day operation of the hospital, ensuring all units are staffed to meet census demands and providing immediate coverage for urgent deployment needs. The ideal candidate is a professional, creative thinker who thrives in a fast-paced, employee-facing environment and can work independently to solve complex scheduling challenges. Multiple Openings & Schedules A. Central Staffing Office (12-Hour Shifts) These roles require comprehensive staffing coordination, sick-call deployment, and weekend coverage for the Staffing Office. Holidays will be worked. 0.9 FTE: Monday, Tuesday, Wednesday (6:00 AM - 8:00 PM) 0.6 FTE: Thursday, Friday (6:00 AM - 7:00 PM) Key Responsibilities Day-of Staffing Coordination: Execute real-time staffing adjustments for central hospital units based on patient census, ensuring safe and efficient operations. Emergency Deployment: Manage the sick-call process and immediately deploy on-call personnel or arrange shift coverage for urgent, unplanned absences. Scheduling Management: Maintain and update staff schedules, demonstrating a strong understanding of hospital staffing ratios and needs relative to census volume. Employee-Facing Communication: Maintain a high level of professionalism and confidentiality when communicating scheduling changes, deployments, and urgent requests to clinical staff and managers. Administrative Support: Utilize computer systems (Microsoft Suite) to document deployment actions, manage payroll submissions, and support overall Staffing Office administrative needs. Required Qualifications Experience: Minimum of 3+ years of related experience in an administrative support role, staffing/scheduling, or hospital environment is strongly preferred. Core Skills: High degree of computer literacy (Proficiency in Microsoft Suite required). Exceptional professionalism in a fast-paced, employee-facing environment. Demonstrated ability for creative problem-solving and working with a high level of independence. Systems Knowledge (Preferred, not required): Experience with EZCall or UKG scheduling software is a plus.

At IUNU ("you knew"), we're revolutionizing the agriculture industry through cutting‑edge AI‑driven solutions for greenhouse operations. Our mission is to empower growers with insights that drive operational efficiency, enhance crop yields, and reduce environmental impact. We are seeking an Applied Machine Learning Engineer for our AI team to develop products for our clients and the greenhouse industry. Applied Machine Learning Engineer responsibilities include creating machine learning models and retraining systems. To do this job successfully, you need exceptional skills in statistics and programming. If you also have knowledge of data science and software engineering, we'd like to meet you. Your ultimate goal will be to shape and build efficient self‑learning applications. Responsibilities Study and transform data science prototypes Design machine learning systems Research and implement appropriate ML algorithms and tools Develop machine learning applications according to requirements Select appropriate datasets and data representation methods Run machine learning tests and experiments Perform statistical analysis and fine‑tuning using test results Train and retrain systems when necessary Extend existing ML libraries and frameworks Keep abreast of developments in the field Requirements 3-5 years of proven experience as a Machine Learning Engineer or a similar role Strong experience with Deep Learning Understanding of data structures, data modeling, and software architecture Deep knowledge of math, probability, statistics, and algorithms Ability to write robust code in Python, Java, and R Familiarity with machine learning frameworks (like Keras or PyTorch) and libraries (like scikit‑learn) Excellent communication skills Ability to work in a team Outstanding analytical and problem‑solving skills BSc in Computer Science, Mathematics, or a similar field; a Master's degree is a plus Diversity At IUNU, we're committed to providing a safe and inclusive environment. We are dedicated to the happiness and success of all of our employees, and strive to foster a workplace in which individual differences are recognized, appreciated, nurtured, and respected. Diversity is important, and we strongly encourage people of all identities and backgrounds to confidently apply for a job with us if this is a role that interests and excites you. We want you to feel comfortable bringing your whole self to work with you, with all of your talents and strengths. #J-18808-Ljbffr

A local disaster cleanup company in Redmond seeks a Restoration General Manager. The role focuses on leading restoration technicians, ensuring high-quality service, and managing client relationships. The ideal candidate will have at least one year of management experience in the restoration field, strong communication skills, and an aptitude for project management. This position offers a salary range of $70,000 to $85,000 annually, along with opportunities for career growth and development. #J-18808-Ljbffr

A technology company specializing in agricultural solutions is seeking a Senior Engineer to tackle complex challenges in distributed systems and horticultural science. You will design and optimize a core data processing engine, ensure data integrity, and drive technical innovation. Ideal candidates will have over 5 years of software engineering experience and deep knowledge of Python and PostgreSQL, among other key skills. Join us to make a real impact in sustainable agriculture. #J-18808-Ljbffr

Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The Operator I operates and maintains sludge, dewatering treatment, processing, disposal and testing equipment in refinery/industrial facility to purify water to meet customer specifications. Primary Duties/Responsibilities: * Must consistently demonstrate the ability to learn and independently operate assigned machines and equipment meeting or exceeding processing and quality targets. * Must demonstrate ability to learn and independently operate equipment such as pumps, engines, centrifuge, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed, odor control, disinfection equipment, sludge processing filters, belt presses and measuring/control devices, testing equipment and material handling equipment. * Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily. * Must demonstrate a working ability to use computer programs for process control. Qualifications Education/Experience/Background: * High School Diploma/GED is required. * Some experience in a related position and environment preferred. Knowledge/Skills/Abilities: * Must have the ability to read, write and comprehend English (operational, process, safety and quality instructions). * Must have the ability to perform basic mathematical calculations. * Must be able to serve rotational 24 hour emergency on-call if required by site. Required Certification/Licenses/Training: * Must possess a valid driver's license and a safe driving record. * Must be able to pass a drug test and a criminal background check. Additional Information Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: This position will repair and maintain pipelines, equipment, and performance of work associated with the operation and maintenance of gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Inspect, maintain, and operate facilities including pipelines, valves, filters, pumps, gas compressors, storage tanks, and pump station equipment in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Conduct Damage Prevention activities including pipeline patrols, one-calls, locating and marking pipelines, and inspecting line crossings, excavations, and other activities affecting the pipeline * Maintain working knowledge of regulatory requirements, perform required tasks, and complete associated documentation (OSHA, DOT, EPA, etc.) * Plan, organize, and prioritize assigned responsibilities and coordinate work with employees and contractors * Coordinate and communicate with outside parties including landowners, public agencies, contractors, utilities, and other pipeline operators * Actively participate and provide leadership in safety programs and initiatives and follow policies and procedures * Provide on-call support for areas of responsibility on a rotating basis * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED preferred. Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Valid driver's license with demonstrated safe driving record * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self-starter with the ability to work independently and exercise good judgement * Must live within 45 miles of the reporting location Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation Working Conditions and Requirements: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment * Frequent heavy lifting with and without assistance * Work on and around equipment and facilities that require knowledge of and adherence to safe work procedures and practices * Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays * Reliable attendance at work * Occasional overnight travel may be required

To verify correct connections of newly installed circuits in generating stations and substations and reports errors. To test generating equipment, measuring instruments and other components of the electrical system for proper operation and makes or suggests corrections where necessary. This position is the highest of a multistep progression from Apprentice P/C Meter Technician-1 to Journeyman P/C Meter Technician I and is expected to know all aspects of Journeyman P/C Meter Technician duties for the Company. Lower steps in this classification are expected to progress into all aspects of these duties. Requirements Requires Journeyman Level experience as P/C Meter Technician I. Communication skills, basic and advanced electricity courses, basic electronics, and decision-making skills. Advanced electronics helpful. Requires valid driver's license First aid certification and CPR competency. Other combinations of education/ experience may be considered. Company provided housing may be available. $20,000 retention payment will be provided to candidates following two-years of continuous service at the plant or when evidence is provided demonstrating the purchase of a regular residency within the District during the first two-years of continuous service. To Apply Complete an online application and attach your resume and cover letter to your profile. All documents must be attached to your application at the time of submitting your application for review. No documents can be attached after you click "Submit". Total Rewards At Avista, our employees are the foundation of our success. Their dedication drives the value we deliver to our customers and communities. That's why we prioritize the physical, mental, and financial well-being of our team members and their families. We offer a comprehensive Total Rewards program designed to support every stage of life and career. Our offerings include: Affordable healthcare options including medical, dental, and vision coverage Retirement benefits with an enhanced 401(k) match Incentive and bonus programs rewarding performance and contributions Generous paid time off including holidays, personal days, and vacation Life and disability insurance for added peace of mind Wellness resources supporting mental and physical health Education and development support including tuition assistance Community giving programs encouraging employee engagement and impact Many other elective benefits from Legal insurance, Pet insurance, and more (Eligibility subject to Bargaining Unit affiliation) To learn more, please visit our benefits website at **************************** We are committed to maintaining a competitive and equitable total rewards package that attracts and retains a diverse, skilled, and engaged workforce. This position is represented by a bargaining unit and wages and benefits are established by the Collective Bargaining Agreement. Questions regarding this posting can be directed to *****************************. Pre-employment screening requirements This position is considered safety sensitive by Avista Corporation for which impairment while working presents a substantial risk. Employment is contingent upon the successful completion of a drug test (including cannabis) background check and motor vehicle records review. Avista's Commitment to Equal Opportunity Avista is a safe, inclusive workplace for people of all backgrounds, and we are committed to Equal Opportunity Employment. All qualified applicants will be considered regardless of race, color, religion, national origin, sex, gender identity, sexual orientation, marital status, age, sensory, mental or physical disability (unless based upon a bona fide occupational qualification), Veteran status or any other classification protected by nondiscrimination laws. Please view Equal Employment Opportunity Posters provided by OFCCP here. Prior to the next step in the recruiting process, we welcome you to inform us confidentially if you require any special accommodations to participate fully in our recruitment process. Avista will make reasonable accommodation to assist a qualified person with a disability in the job application, interview process, and to perform the essential functions of the job whenever possible, where undue hardship would not be created for Avista. Please contact us at ***************************** if you would like assistance.

Installation of pneumatic and hydraulic systems, emergency shutdown systems and equipment under minimal supervision. Layout, measure, fabricate and install tubing tray. Layout, measure, bend, cut, thread, ream and fit hard pipe systems. Install single line and group tubing and fittings. Able to layout and install pneumatic and hydraulic panels and end devices. Demolition of tubing and end devices. Knowledge of industry and American Petroleum Institute standards. Able to read relevant construction drawings. Knowledge of pneumatic and hydraulic control logic. Proficient in the use of tools of the trade. Able to recognize and avoid safety hazards and dangers All above functions performed with minimal supervision.

SSE is a leading technology company for over 30 years, we are a leading provider of aviation technical publications, courseware development, and virtual training development for military and commercial aircraft. We are seeking skilled Avionics Technicians with "O" Level - Flightline Maintenance experience to join our team as a Maintenance Subject Matter Experts (SMEs). This is a St. Louis based opportunity with occasional travel. Maintenance SMEs will assist in the design, development, and revision of technical publications for the Navy's Super Hornet and Growler aircraft. SMEs will follow formats and templates as required by a program and when required may develop appropriate document formats for specific publications. These are tremendous opportunities to transition from hands-on aircraft experience into an office environment while drawing from the intrinsic aircraft specific experience all while staying relevant in the aerospace industry. MAINTENANCE SME RESPONSIBILITIES: Perform the duties of technical publications writer on one or more military aircraft programs, to write, design, and document to specification guidelines Edit scripts, storyboards, and select and edit supporting graphic content Review and ensure quality, technical correctness and instructional soundness of draft and final documents Participate in all phases of project execution (Analysis, Design, Development) QUALIFICATIONS: 5+ years' of Squadron / Flightline maintenance as an Avionics Technician on a military fighter aircraft is REQUIRED Ability to interpret technical documentation such as blueprints, schematics, technical publications Ability to work well within a collaborative team environment Ability to work independently and ensure performance to deadlines and milestones Strong verbal and written communication skills and demonstrated ability to effectively deliver a complex message, either written or verbal Knowledge of the following productivity software is desired: MS Word, Excel, PowerPoint, Outlook “This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required.” US Citizen or Lawful Permanent Resident (Green Card) BENEFITS: 40 hour work weeks, flexible schedule Weekly pay checks 12 Paid Holidays annually 13 PTO days annually 401K with company match Medical, Dental, Vision co-pay plans

The Ordinary Seaman (OS) co-ordinates with other Seamen, the Bosun, Crane Operators or any other person necessary for the safe and efficient operation of the vessel. Primary Duties / Responsibilities: * General vessel maintenance, including safe handling of tools and equipment for surface preparation and the application of paints and solvents. * Assisting in machinery spaces as required. * Maintenance of emergency equipment and assisting in the maintenance of lifesaving and firefighting equipment as directed by the Chief Officer. * Assisting in the launch, recovery and routine daily maintenance of rescue craft. * Undertaking duties of Helideck Attendant as directed. * Assisting in all matters related to marine operations, including Watchkeeping duties as required. * Assisting the Operations Department if requested to do so by the Chief Officer. * Performing emergency duties in accordance with the vessel's Muster List / Station Bill. * Ensuring that daily activities are carried out in a safe and healthy manner and that the impact of such activities on the environment is within acceptable limits. * Complete other duties and/or projects as required and assigned by management. Qualifications Education / Training: Qualification requirements are contained in the Vessel Qualifications and Training Matrix appropriate to each vessel. Merchant Mariner Credential (MMC) and TWIC are required for this position. Skills: Able to speak and understand English. Able to work as a team member. Special Requirements * Additional requirements are contained in the Vessel Qualifications and Training Matrix appropriate to each vessel. * The OS has the authority to stop ANY activity on the grounds of immediate safety, health and environmental hazards. Decision Making: The Ordinary Seaman co-ordinates with other Seamen, the Bosun, Crane Operators or any other person necessary for the safe and efficient operation of the vessel. Helix Energy Solutions Group is an equal opportunity employer.

Petroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

CK Associates is seeking a Senior Environmental Waste Consultant to join our Risk Assessment, Remediation, and Waste Group in our Baton Rouge office. This senior-level position offers a unique opportunity to lead impactful environmental projects, provide technical expertise, and contribute to the growth of our well-established, employee-owned consulting firm. In this role, you ll work with a talented team of Geologists, Engineers, Chemists, Toxicologists, and Senior Scientists balancing project management, fieldwork, technical advising, and client engagement. We are committed to the continued professional development of our team, and this position offers significant opportunities for career advancement and leadership. Key Responsibilities: Lead solid and hazardous waste permitting activities and ensure regulatory compliance; Manage and execute solid and hazardous waste projects in line with budget, schedule, and client expectations; Prepare and review work plans, applications, technical reports, data summaries, and data visualizations (e.g., figures, trend graphs, data tables); Coordinate directly with clients and regulatory agencies; Identify and develop new business opportunities, supporting the growth of our Risk, Remediation, and Waste Program and related service lines; Mentor and support junior staff within the Waste Program; Stay current on emerging regulatory issues impacting our clients; Manage multimedia projects; and Travel to project sites and occasionally to CK offices in Lake Charles, Shreveport, and Houston. Qualifications Master s or bachelor s degree in Environmental Science, Engineering, or similar field; 10 years working in the environmental field with experience specific to waste permitting and compliance. Consulting experience preferred. Project management experience; Proficient technical writing skills; Proficiency with MS Office programs; Proficient mathematical and computer skills; Willingness and ability to travel to project sites (including some overnight stays); Ability to work on multiple projects simultaneously and maintain successful client relationships; Must be able to satisfy all Drug & Alcohol, Health & Safety, and Security requirements including obtaining a Transportation Worker Identification Credential (TWIC) card; This position requires the use of a company vehicle. Candidate must be at least 21 years of age with a clean driving record, and able to safely operate a full-size pickup truck; and Eager to excel as an individual and in a team environment. If you're a driven environmental professional looking to make a meaningful impact while growing your career, we d love to hear from you.

Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: This position provides specialized transportation and disposal services to our clients. Responsibilities include manifesting, packaging, spill response, labeling, loading/unloading, coordinating transportation, and sampling/profiling material while adhering to state and federal environmental, health, and safety regulations. Primary Duties /Responsibilities: Sample waste streams according to prescribed policies and procedures. Manifesting, packaging, spill clean-up response and remedial activities, labeling, loading, off loading, and coordinating transportation. Maintain a professional image to clients by answering inquiries and suggesting solutions to existing/potential problems. Comply and enforce all compliance, health, safety, and procedures in accordance with VES-TS policies. Become familiar with all U. S. Department of Transportation (DOT)/Environmental Protection Agency (EPA) and VES-TS regulations required in submitting paperwork to expedite disposal of hazardous waste. Operate and maintain all equipment in a professional manner to ensure optimum efficiency and effectiveness. Other duties as assigned. Qualifications Education / Experience / Background: High School diploma or General Educational Development (GED) required Bachelor's degree in Chemistry or a related science discipline preferred Knowledge / Skills / Abilities: Strong team player Excellent interpersonal and communication skills Time management: the ability to organize and manage multiple deadlines Strong customer service orientation Computer proficiency Ability to follow through on assignments. Required Certification / Licenses / Training: 40-hour HAZWOPER Certification Valid Driver's License Ability to obtain a Class A or B Commercial Drivers License (CDL) with Hazardous (H) endorsement Additional Information Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description: Glass Technician (Automotive) The Glass Technician is responsible for the repair, removal and/or replacement of damaged windshields, door glass and quarter glass on automobiles. The Technician must have the ability to inspect windshields and windows to properly determine if glass needs to be repaired or replaced. Responsibilities include identifying issues that may affect glass installation and safely removing damaged glass and installing new glass. The position will be required to work in conjunction with auto collision repair team members at our locations, cooperating to repair damaged vehicles in an efficient manner. Job Duties/Responsibilities: Traveling to various locations to assess as well as repair or replace customers' windshields and windows. Proper maintenance of company provided mobile truck and tools. Identify issues that may affect glass installation, such as rust or vehicle damage. Remove all dirt and debris from windshields and windows before beginning repair or weatherproofing treatments. Removing moldings, wipers, screws, bolts, and clips before glass installation and repairs and replacing them thereafter. Utilize primer to prime all damaged areas of windshields and car windows. Weatherproofing glass by applying a chemical treatment to the outer surfaces and installing rubber weather seals around glass edges. Injecting resin into small chips or cracks and heating the damaged areas using a heat source. Using clips, moldings, and adhesives to affix custom-cut glass to customers' vehicles. Ensure windows are clean and all debris from installation is removed at end of installation or repair. Skills/Qualifications: 5+ years in Auto Collision Repair & Auto Glass Removal/Installation experience required. Experience in Calibrations is a plus. Certification in automotive glass repair and installation through the National Glass Association (NGA) preferred. Physical strength and dexterity to work well with large panes of glass. Adhere to all health and safety regulations when using hazardous materials. Ability to coordinate multiple stores and jobs with flexibility. The ability to read and follow instructions precisely and to work independently as well as with others in an organized manner is essential. The ability to produce within a specified time and/or deadline and be capable of operating in a fast-paced, performance-driven team environment. Participate in training programs as required to maintain the technical and professional skills and techniques necessary for this position.

Employee Type: Regular-Full time Union/Non: Are you enthusiastic about ensuring the reliability and efficiency of critical infrastructure? We are seeking an Electrical Controls Technician to join our team and play a key role in maintaining the electrical and select mechanical components of our pipeline system. We offer competitive compensation, comprehensive benefits, and opportunities for professional growth. Join us and be part of a company that is determined to make a difference in the energy sector! #joinourteam Note: Company sponsored international relocation will not be offered for this role. What you will do: Perform preventative and repair maintenance on all aspects of pipeline associated equipment with the intent to operate the line at optimum efficiency. Maintain Operator Qualification requirements and required training. Responsible for DOT inspections and completing the accurate documentation. Ensure Regional Objectives are kept in the forefront of day-to-day operations with Safety and performance of tasks critical to the attainment of goals set forth by Regional Management. Oversee and/or assist with all projects in areas of responsibility. Responsible for site security. Required to be on a maintenance on-call schedule. Support Emergency Response and assist when requested. Familiar with computer operations; Windows, Microsoft Office (Word, Excel, PowerPoint, Outlook), etc. Who you are: Required: High School Diploma or equivalent technical or vocational education. 2-5 years of directly relevant training and experience. Excellent trouble shooting ability. Valid driver's license & excellent driving record (to be confirmed before hire). Ability to operate a Commercial Motor Vehicle (CMV) and establish a CMV file. Must live (or self-relocate) within 25 miles/60-minutes of the reporting location. Preferred Electrical Journeyman or participation in an accredited Apprenticeship Program Industrial experience with HVAC/R Experience in maintenance of crude oil pipeline system, pumping station(s) or delivery facilities or certified technical designation. Familiarity with pertinent equipment (pumps, motors, valves, switchgear, flow meters, programmable logic controls, motor control centers, uninterruptible power supplies and instrumentation). Working Conditions: Primarily field oriented (outdoor) with specific office (indoor) functions for training, meetings, and documentation of required tasks, dictated by Department of Transportation and other regulatory agencies for which Enbridge must comply. 100% Drug Free and alcohol free when on duty as Maintenance On-Call or emergency response. Travel is required ~25%; up to 25 days per year may be required including some overnight travel. Required to participate in Maintenance On-Call schedule (every third week) and provide 24-hour emergency response as needed. Work often required in high noise level areas and areas where vapors from crude oil and solvents may be present. Flexwork: Enbridge provides competitive workplace programs that differentiate us and offer flexibility to our team members. Enbridge's FlexWork (Hybrid Work Model) offers eligible employees the opportunity to work variable daily schedules with a flexible start or end time or to opt for a compressed workweek schedule. Role requirements determine your eligibility for each option. #LI-Hybrid Physical Requirements (included but not limited to): Balancing, bending and stooping, climbing, crawling, carrying (up to 85 pounds), grasping, kneeling, lifting (Up to 100 pounds), pulling hand over hand, pushing, reaching above shoulder, repetitive motion, sitting, standing, walking, visual requirement (able to see screens, detect color coding, read fine print), hearing requirement. Mental Requirements (Both Field & Office) include but are not limited to: Ability to: understand, remember and apply oral and/or written instructions or other information, understand complex problems and collaborate/explore alternative solutions, organize thoughts and ideas into understandable terminology, organize and prioritize work schedule on a short-term basis, make decisions which have moderate impact on the immediate work unit and monitor impact outside this area, understand and follow basic instructions and guidelines, complete routine forms, compose letters, outlines, memoranda and basic reports and communicate with individuals via telephone. At Enbridge, we are dedicated to our core value of Inclusion. We are proud to be an Equal Opportunity Employer. We are committed to providing employment opportunities to all qualified individuals, without regard to age, race, color, national or ethnic origin, religion, sex, sexual orientation, gender identity or expression, marital status, family status, veteran status, Indigenous status, disability, or any other reason protected by federal, state, or local law. Applicants with disabilities can request accessible formats, communication supports, or other accessibility assistance by contacting ********************. Information For Applicants: Applications can be submitted via our online recruiting system only. We appreciate your interest in working with us; however, only those applicants selected for interviews will be contacted. Final candidates for this position may be required to undergo a security screening, including a criminal records check. To learn more about us, visit ****************

Pipe Fitter/Welder About PROENERGY PROENERGY is a global and vertically integrated energy transition platform. Focused exclusively on fast-start, dispatchable power, our company supports both energy security and renewable growth with complete turbine services, project development, equipment manufacturing, turnkey generation facilities, operations, and maintenance. Our Footprint We are primed for the energy transition with permanent service locations in Missouri, Texas, and Argentina. Our world-class Missouri headquarters is purpose-built to meet dispatchable power needs. It sits on 90 acres in Sedalia and features more than 600,000 sq. ft of service capacity under roof, which includes the only independent Level-IV aeroderivative depot and string-test facility in the world. Our Houston, Texas, office is a strategic satellite positioned near our own dispatchable power installations. Our Philosophy We take care of our people and strive to make a positive difference for the world. We offer competitive pay, excellent benefits that include Medical, Dental, Vision, and Life/Disability Insurance at minimal cost to the employee, 10 paid holidays, paid time off, and a 401K plan. If you are looking for a rewarding career and possess specialized knowledge and quality-oriented problem-solving skills, we encourage you to apply today. Assemble, weld, install, and maintain piping systems and related equipment for manufacturing and industrial production systems. This role involves interpreting complex drawings, performing precision pipe fitting and welding primarily on Small-Bore Stainless-Steel Piping, and ensuring that all work meets stringent ASME codes, safety requirements, and quality standards.Assemble, weld, install, and maintain piping systems and related equipment for manufacturing and industrial production systems. This role involves interpreting complex drawings, performing precision pipe fitting and welding primarily on Small-Bore Stainless-Steel Piping, and ensuring that all work meets stringent ASME codes, safety requirements, and quality standards. Please note this is full-time day shift position 100% based at our facility in Sedalia, MO. As such, there are no travel requirements or per diems. Reports To: Fabrication Manager Work Location: 2001 Proenergy Blvd., Sedalia, MO 65301 Position Responsibilities Read and interpret 2D and 3D piping drawings, isometrics, P&IDs, and ASME code specifications to plan fabrication and installation of piping systems. Cut, fit, weld, and assemble pipe spools and components to specified dimensions and tolerances using appropriate tools and welding processes in compliance with ASME requirements. Maintain accurate weld maps and documentation for all fabricated pipe spools and assemblies, ensuring traceability for ASME code compliance. Requisition and manage tools, equipment, and materials necessary for each project phase, coordinating with supervisors and procurement as needed. Install pipe supports, valves, flanges, couplings, and fittings to connect piping systems to machinery, tanks, pumps, and process equipment per ASME B31.1/B31.3 standards. Conduct inspections, hydrostatic testing, and other quality verification procedures to ensure systems meet ASME and customer specifications. Ensure adherence to all safety, environmental, and quality control policies and procedures. Precision pipe fitting and welding primarily on Small-Bore Stainless-Steel Piping Required Qualifications High school diploma or GED, or equivalent relevant experience. Minimum of 3-5 years of pipe welding and fitting experience in an industrial or manufacturing environment. Journeyman-level pipefitting or welding certification (or equivalent training and experience). Familiarity with ASME welding procedures and B31 piping codes. US work authorization is a precondition of employment. The company will not consider candidates who require sponsorship for a work-authorized visa. Candidate must also pass a State and Federal criminal history/security background check and pre-employment drug screen. Desired Qualifications Proven ability to troubleshoot piping system and equipment issues. Experience reading and interpreting P&IDs, process flow diagrams, and isometric piping drawings. Working knowledge of ASME, AWS, and other relevant welding and piping codes. Familiarity with manufacturing processes, process controls, and plant utilities. Proficiency in using welding and pipefitting tools, measuring instruments, and related equipment. Ability to work at heights, in confined spaces, and in various environmental conditions. Strong commitment to safety practices and use of PPE (hard hat, steel-toe boots, safety glasses, respirators, hearing protection). Essential Job Functions Ability to walk manufacturing and construction sites, climb ladders and stairs, and work on uneven surfaces. Ability to lift at least 50 lbs. and work in a variety of positions (standing, kneeling, overhead). Daily use of welding equipment, forklifts, hand tools, and computers for job documentation and communication. Essential Job Functions Ability to walk manufacturing and construction sites, climb ladders and stairs, and work on uneven surfaces. Ability to lift at least 50 lbs. and work in a variety of positions (standing, kneeling, overhead). Daily use of welding equipment, forklifts, hand tools, and computers for job documentation and communication. It is PROENERGY's policy to provide equal opportunity in employment to all its employees and applicants for employment without regard to race, color, religion, sex, pregnancy, age, disability, national origin, marital status, ancestry, medical condition, military status, or any other characteristic protected by State or Federal law.