Stabilus GmbH jobs

for PST - Maintenance Planner - Band BTA PST - Maintenance Planner - Band BTA The PST - Maintenance Planner job family encompasses a range of roles responsible for planning, scheduling and coordinating maintenance activities. These roles are critical to ensuring the efficient operation of our facilities and the safety of our employees. Job Description: This role is responsible for planning, scheduling and coordinating preventive maintenance and repair work on equipment and systems. The Maintenance Planner will work closely with the maintenance team to ensure that all work is carried out in a timely and efficient manner, minimizing downtime and maximizing productivity. Key Responsibilities Develop and maintain preventive maintenance schedules for equipment and systems. Coordinate with the maintenance team to schedule repair work. Analyze equipment performance data to identify potential problems and areas for improvement. Ensure that all maintenance work is carried out in accordance with safety standards and regulations. Participate in the development and implementation of new ideas, techniques, procedures, services, or products under guidance. Qualifications Experience in a maintenance planning role in a manufacturing or industrial setting. Strong organizational skills and attention to detail. Ability to analyze data and make informed decisions. Familiarity with safety regulations and procedures in a maintenance environment. Awareness of relevant external (legal, tax) and internal (e.g. decision authority, procure to pay) stewardship requirements and acts accordingly. Seeks guidance from supervisors to ensure compliance and drives corrective actions as needed under supervision. Starting Pay / Salary Range USA Salary Range: $66,800.00 - $92,700.00 / year (Please note, Salary Range/Starting Pay is only applicable to US and Canada-based roles.) P&G is committed to fair pay, transparent compensation principles, and a diverse and inclusive workplace. As part of our commitment to provide a superior employee experience/Employee Value Equation, we offer a comprehensive and competitive Total Rewards package that contributes to employees feeling ‘Valued and Rewarded.' In addition to base salary, U.S.-based employees are eligible (depending on role and level) for programs such as Power of You, CEO Award, STAR, and LTIP, and have access to a broad portfolio of benefits such as Retirement (PST), healthcare, disability coverage, vacation, paid holidays, and more. Compensation at P&G varies depending on a wide array of non-discriminatory factors including but not limited to the specific location, role, degree/credentials, relevant skill set, and relevant experience. The starting pay ranges reflect the range of pay with which we would expect to hire someone into the company. This may differ from your actual wages/salary. For questions about your individual compensation, reach out to your Immediate Manager.

Job Title: Sous Chef- Commercial Food Operations Salary Range: $57,774.71 - 72,218.39 About us LSG Sky Chefs is one of the world's largest airline catering and hospitality providers, known for its outstanding reputation and dynamic approach in the industry. Voted “Airline Caterer of the Year in North America” for three consecutive years 2023, 2024, and 2025 we are committed to excellence and innovation, driven by the dedication and expertise of our talented employees. Our team members are the heart and soul of our success, consistently delivering exceptional culinary experiences and outstanding service to our clients and their passengers across North and Latin America. Position Summary We're seeking a talented Sous Chef to join our Chicago Culinary Operations team. Reporting to the Executive Chef, you'll oversee daily food production, ensure top-tier quality and safety standards, and lead a team in creating diverse, high-quality menus. If you have a passion for culinary excellence, strong leadership skills, and experience in commercial cooking, this is your chance to make an impact in a fast-paced, global catering environment. Location: near Chicago O'Hare International Airport Schedule: We support a variety of airlines and operate multiple shifts 365/24/7. Flexibility with schedule is a requirement. How You'll Make a Difference Food Production Executes and supervises food production activities, e.g. proper cleaning, cutting, marinating, seasoning, cooking of food items etc. Assumes responsibilities of Executive Chef when he/she not available ie. Vacation, off-days, menu presentation to customers, etc. Supervise, coordinate and control kitchen helpers in food storage (e.g. maintaining tidiness, following the first in - first out principle) Conducts, coordinates and supervises inventories Monitors material consumption and orders required food and equipment on a daily basis to satisfy the daily production plan Participates in the development of food products and menus as needed for menu presentations Must be aware of content in catering manuals; conducts updates when necessary Executes countermeasures in the production in case of customer complaints Supports training of kitchen helpers Quality Maintains and monitors hygiene, health and safety standards and monitors that Hazard Analysis and Critical Control Point (HACCP) regulations are adhered to Maintains and monitors quality, conducts quality control checks according to HACCP regulations Conducts quality checks of goods received Monitors and ensures compliance with recipe specifications Leadership Ensure that the area of responsibility is properly organized, staffed and directed Guide, motivate and develop the subordinate employees within the Human Resources Policy Make the company's values and management principles live in the department(s) Implement and control the cost budget in the area of responsibility; initiate and steer corrective actions in case of deviations Participate and support company sponsored initiatives such as Global Quality Standard (GQS), HACCP, Lean Manufacturing What We Look for in a Candidate Three to five years of experience in commercial cooking or Apprenticeship or Certification from culinary school required Knowledge of food and hygiene regulations (HACCP) Understand and demonstrate concepts of financial controls (ex: keep food cost within budget, control stock levels while being cost conscious, minimize waste) Good communication and organizational skills Service orientation Leadership skills Good knowledge of Microsoft Office and Windows-based computer applications LSG Sky Chefs is an EEO and Affirmative Action Employer of Women/Minorities/Veterans/Individuals with Disabilities.

Field Sales Role must live in Territory! Advance your career with the Johnson Controls team! As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet. Join a diverse and inclusive team that empowers you to build your best future! Our teams are strategically positioned to support a multitude of industries across the globe. You will have the opportunity to grow and develop through meaningful work projects and learning opportunities. We are committed to fostering an environment that supports the physical, financial, and emotional wellbeing of all employees. Become a valued member of the Johnson Controls family and thrive in a company culture that values your unique voice and ideas - your next great opportunity is just a few clicks away! We recognize that a fulfilling career is supported by your overall wellbeing. That's why we offer a comprehensive benefits package designed to support you in multiple aspects of life, including: Competitive salary Generous paid vacation, holidays, and sick time - 15 days of vacation in your first year to promote work-life balance Comprehensive benefits package, including 401K, medical, dental, and vision care, available from day one An encouraging and collaborative team environment that values diverse perspectives and fosters innovation On-the-job and cross-training opportunities A strong commitment to safety through our Zero Harm policy, ensuring a safe and secure workplace for all employees JCI Employee discount programs (The Loop by Perk Spot) Check us Out: A Day in the Life of the Building of the Future Become part of a culture that celebrates your achievements and encourages your voice and ideas. Your next great opportunity for advancement is right at your fingertips! Take the initiative to explore your potential and embark on an exciting career journey with Johnson Controls. What You Will Do As a key member of our dynamic sales team, you'll lead the charge in delivering Johnson Controls' advanced enterprise security solutions to general contractors, electrical contractors, and consulting engineers. You'll be at the forefront of shaping safer, smarter buildings by promoting our industry-leading technologies-such as CCTV, access control, and integrated security platforms-that protect people, property, and operations. This is more than a sales role-it's an opportunity to drive innovation, build strategic partnerships, and make a meaningful impact in the construction and technology space. You'll help clients solve complex challenges with tailored business and technical solutions, while building long-term relationships that foster trust, loyalty, and growth. How You Will Do It Lead with confidence: Sell Johnson Controls' security offerings persuasively and strategically to contractors, consultants, and designers. Drive results: Identify and pursue opportunities that align with customer goals, managing multiple high-value engagements simultaneously. Build lasting partnerships: Develop strong relationships with decision-makers in the construction community, listening actively and offering solutions that deliver measurable value. Champion service agreements: Position renewable service contracts as a key part of long-term customer success, ensuring ongoing support and satisfaction. Be a trusted advisor: Share your technical and business expertise to match solutions to customer needs, positioning Johnson Controls as their go-to partner for enterprise security. Advocate for your customers: Ensure they receive maximum value from our offerings, from initial engagement through final project delivery and training. What We Look For Required Bachelor's degree in business, engineering, or a related field-or equivalent experience. 1-3 years of experience selling enterprise-level security solutions (e.g., CCTV, access control, integrated platforms). Strong initiative, integrity, and interpersonal communication skills. Proven ability to influence key stakeholders and drive strategic outcomes. Experience with CRM platforms such as Salesforce. Salary Range: HIRING SALARY RANGE: $75,000-100,000(Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This role also offers a competitive Sales Incentive Plan that will take into account project, quarterly, and annual margin. This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** #LI-MM1 #SalesHiring #LI-Onsite

Company: US3090 Sygma Illinois (The Sygma Network, Inc) Sales Territory: None Zip Code: 61834 Travel Percentage: 0 Compensation Range: $10.00 - $48.00 The compensation range provided is in compliance with state specific laws. Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors. You may be eligible to participate in the Company's Incentive Plan. BENEFITS INFORMATION: For information on Sysco's Benefits, please visit ************************* Are you looking for a place to call home? Stability? A Career? Come join the SYGMA Danville, IL Team and get paid what you're worth. Our Delivery Drivers run 2-4 routes per week, and average $94-97K per year. At SYGMA we value our people and take pride in offering our customers the best service in the industry. We place an emphasis on teamwork and are known for developing our top internal talent. Offering Paid Training and Top Earning potential. Our Formula to Success is simple Route Pay + Bonuses = SYGMA Top Dollars. JOB SUMMARY To serve our customers by safely and efficiently transporting products from the warehouse by driving a tractor trailer to various customers and properly delivering and unloading products according to customer invoices and company standards. Top Earners Make Up to $180,000! Highly Maintained Equipment - all automatics 10 Paid Holidays! Medical, Dental and Vision Insurance Benefits active on the 1st of the month after 31 days of employment. 401k and Sysco Stock Purchase Plan Drive both team and single routes Evening Dispatch, Sunday - Friday The More You Drive; The More You Earn! RESPONSIBILITIES: Unloads product from trailer, by hand or using a hand cart down ramps, stairs, or docks, in all weather conditions and places in designated customer storage areas according to customer specifications and company standards (e.g., handling product according to preferred work methods, scanning product as it is delivered into the store). Ensures all paperwork is completed according to established company and governmental guidelines (e.g., DOT electronic or manual logs, inspections, company vehicle maintenance reports and pre- and post-trip reports are completed accurately and submitted on a timely basis, ensures all invoices are accurate and turned in daily and all damages and shortages are reported promptly). Ensures all food safety protocols are met according to established guidelines (e.g., proper temperatures are maintained in the delivery vehicle, product is inspected for visible damages prior to delivery, product is delivered and stored to prevent cross contamination) and maintains sanitary conditions in tractor and trailer; assists with maintaining sanitary conditions in the warehouse and yard. Develops and establishes good relationships with customers by providing excellent and courteous service with clear communication. Other duties as assigned by Management. REQUIRED MINIMUM EDUCATION/EXPERIENCE: High school diploma/GED/equivalent degree, plus 1 year of tractor trailer driving experience preferred. Completion of a tractor trailer driving school will be accepted instead of, or in addition to a high school diploma. CERTIFICATIONS AND/OR TECHNICAL REQUIREMENTS: Valid Class A Commercial Driver's License. Must be insurable to operate a vehicle as a condition of initial and continued employment. KNOWLEDGE, SKILLS, AND ABILITIES: Knowledge of: DOT regulations; Hazmat guidelines; Safe lifting and delivery practices. Skill in: driving over long distances, over a variety of terrains and in varying weather conditions, communicating with customers; solving problems; delivering products. Ability to: drive a tractor-trailer unit both in the day and at night, remain alert and aware of surroundings; meet or exceed minimum productivity levels established by the Company; handle hazardous materials and food and restaurant items that are frozen, dry and refrigerated; operate a 3 axle tractor, 45' - 48' trailer, straight truck, on board computer, key pad and a 2 wheel hand cart Perform basic math functions (e.g. add, subtract, multiply, divide); effectively plan and organize work activities independent of direct supervision; solve problems. Ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. While performing the duties of this job, the associate is regularly required to sit, talk, and hear. The associate is frequently required to lift, push, or move product that weighs up to 50 pounds by hand and push/pull up to 250 pounds of product with a 2-wheeled hand cart down a ramp and into the customer's storage areas; climb in and out of a tractor and trailer; reach to stack and unstack pallets and hand cart; bend and twist while loading and unloading product, and retrieving items from trailer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an associate encounter while performing the essential functions of the job. While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate usually works an overnight schedule, including weekends, holidays, overtime, on-call and starting at various times are required to successfully meet customers' needs. The associate is occasionally exposed to high, precarious places, fumes, or airborne particles. The noise level in the work environment is usually moderate. Overtime hours, working weekends and holidays, and starting at various start times are required to successfully meet customers' needs. NOTICE: The above statements are intended to describe the general nature of the environment and level of work being performed by this job. This in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job-related duties requested by his or her supervisor. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. This supersedes prior s. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity. EEO/AA Employer BENEFITS INFORMATION: For information on Sysco's Benefits, please visit ************************* HOW WE PROTECT OUR ASSOCIATES COVID-19 Precaution(s): Personal protective equipment and masks provided Temperature screenings Social distancing guidelines in place Sanitizing, disinfecting, and cleaning procedures in place OVERVIEW: Sysco is the global leader in foodservice distribution. With over 57,000 associates and a fleet of over 13,000 vehicles, Sysco operates approximately 326 distribution facilities worldwide and serves more than 625,000 customer locations. We offer our associates the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We're looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates. OVERVIEW: Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations. We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We're looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

This is a hybrid role with 50% on-site requirement in Wilmington, MA. We are seeking a highly analytical, self-driven Senior Financial Analyst to join our FP&A team. This role provides broad visibility across the business and requires strong ownership, curiosity, and the ability to thrive in a fast-paced environment. The ideal candidate combines financial experience with the ability to turn data into insights and influence decisions. You will partner closely with senior leadership and cross-functional teams to lead budgeting, analyze performance, and communicate key financial and operational trends. Success in this role requires driving deep into business, challenging assumptions, identifying risks and opportunities, and delivering forward-looking insights that drive results. Responsibilities: The selected candidate will be able to perform the following duties with or without a reasonable accommodation: Business & Financial Analysis Analyze monthly financial results, investigate trends and anomalies, and clearly communicate key performance drivers, risks, opportunities, and recommendations to finance and business leadership. Own portions of the annual budgeting, forecasting, and long-range planning processes. Develop and enhance financial reporting and dashboards that drive business decisions. Business Partnership & Decision Support Build strong relationships with regional and functional leaders across operations, sales, service and other areas. Partner with business leaders to support strategic initiatives and business cases with sound financial analysis. Communicate insights clearly and confidently to senior leadership in both written and verbal formats. Reporting & Modeling Participate in the preparation of the timely and accurate P&L and KPI reporting packages. Support ongoing and ad hoc reporting and analysis requests with a continuous improvement mindset. Develop and maintain financial models to support scenario analysis, forecasting, and strategic planning. Ownership & Initiative Learn the drivers of the business to deepen insights into financial results and future performance. Manage multiple priorities efficiently with minimal direction, while maintaining accountability for quality and deadlines. Continuously look for ways to streamline processes, improve reporting, and drive better decision-making. Qualifications Bachelor's Degree in Finance or Accounting, Economics, or related field. Advanced Excel and financial modeling skills. 5+ years of progressive financial analysis or FP&A experience. Strong analytical and problem-solving abilities with a high level of accuracy, attention to detail, and intellectual curiosity. Proven experience working independently, managing projects, and driving results with minimal supervision. Excellent communication and storytelling skills, including the ability to translate complex data into clear insights. Strong interpersonal skills with demonstrated success building relationships across all levels of the organization. Working knowledge of U.S.GAAP or core accounting principles. Preferred Experience with Oracle EPM, Hyperion, Smart View, Essbase, or similar applications. Experience with SQL querying. Experience with Power BI, Tableau, and/or other data visualization tools. MBA,CPA, CFA or similar advanced credential. Experience supporting senior leadership in a fast-paced, matrixed environment. The estimated annual salary for this position ranges from $82,500- $110,000. Actual compensation will vary based on factors including but not limited to the candidate's skills, experience, and qualifications. Geographic differentials may also apply depending on the position's location. There is no application deadline for this role; recruitment will remain open until the position is filled. UniFirst offers a Fleet of Benefits, 50+ to be exact! 401K with Company Match Profit Sharing Health Insurance Employee Assistance Program Life Insurance Supplemental Life Insurance Long Term Disability Vacation Sick Time Paid Holidays Direct Payroll Deposit Tuition Reimbursement 30% Employee Discount Employee Referral Program Where will a UniFirst Career take you? As an industry leader in the rental, lease and sale of uniforms and facility services products, UniFirst Corporation has grown to become one of the largest companies in the garment services industry. UniFirst is recognized on the Forbes “Platinum 400 - Best Big Companies” List. With over 14,000 employee Team Partners and more than 250 facilities throughout the United States, Canada, Mexico and Europe, you are never just a number when you work for UniFirst. What sets us apart from all other companies is that we still function as a family run business. When you work for UniFirst, you're family! UniFirst Corporation has a strong history of promoting from within. In fact, most of UniFirst's Senior Managers have come from within the Company. Opportunities are endless for those individuals who possess a strong work ethic, a commitment to quality, and above all else, a passion for delivering quality customer service, both internally and externally. Our culture is what makes UniFirst an organization that stands out from the rest. Are you interested in loving your job? Find out just how far a career with UniFirst can take you. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Customer Service Specialists work closely with wholesale and retail customers to determine their needs, answer their questions about Sherwin-Williams products, and recommend the right solutions. Store associates Customer Service Specialists are also expected to promptly resolve any customer concerns and ensure maximum client satisfaction as well as stay up-to-date with product features and maintain the high quality and visual standards of the products and store. Customer Service Specialists are tasked with achieving excellent customer service, while consistently meeting the store's sales goals.This position is eligible for health benefits, such as medical, dental and vision coverage, Flexible Spending Accounts (FSAs), disability coverage, security, retirement and saving benefits, and more. Additional benefits include a generous time away from work package, including personal leave, paid parental leave, medical leave, vacation, holidays, among other benefits. For more information about our benefits, visit **************************** Job duties involve contact with customers, which may include minors; and access to cash and other payment methods, electronic equipment, personal information, store merchandise and other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company's customers, staff, employees, vendors, contractors, and the general public. The individual selected for this role will be expected to work at Store #2725 located at 6300 Grand Ave. Ste. C Gurnee, IL 60031, Store #3255 located at 184 W Rollins Rd. Round Lake Beach, IL 60073, Store #3428 located at 515 E Il Route 173 Antioch, IL 60002, Store #1788 located at 2800 Hartigan Rd. Volo, IL 60020, and Store #3035 located at 3611 Grand Ave, Gurnee, IL 60031. This is a Full Time Role Pay Starts at $18.75 At Sherwin-Williams, our purpose is to inspire and improve the world by coloring and protecting what matters. Our paints, coatings and innovative solutions make the places and spaces in our world brighter and stronger. Your skills, talent and passion make it possible to live this purpose, and for customers and our business to achieve great results. Sherwin-Williams is a place that takes its stability, growth and momentum and translates it to possibility for our people. Our people are behind the strength of our success, and we invest and support you in: Life … with rewards, benefits and the flexibility to enhance your health and well-being Career … with opportunities to learn, develop new skills and grow your contribution Connection … with an inclusive team and commitment to our own and broader communities It's all here for you... let's Create Your Possible What is the Process to get Started? Step 1 - Online Application Find the role(s) that interest you on our Careers page: ****************************** Set aside 15 minutes to create your profile by entering or importing your details from one of our job board partners Step 2 - Digital Interview Upon review of your application, qualified candidates will be invited to complete a digital video interview via HireVue, our interview partner. The interview will consist of a few behavioral based questions You'll be able to record and complete your video interview anytime, anywhere! While you can complete this video interview on your own schedule, we ask that this step be completed within 7 days of receiving an invitation Step 3 - In-Store Interview Your video interview is reviewed by a member of our Recruitment team and our top candidates are invited to meet with our team in a store, specialty wholesale branch, floorcovering facility or delivery service terminal. At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commute-it matters to us. A general description of benefits offered can be found at ****************************. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. Ensure high levels of customer satisfaction through excellent sales service Assist customers in person and over the phone by determining needs and presenting appropriate products and services Build productive trust relationships with wholesale and retail customers Process sales transactions accurately and consistent with policies and procedures Follow and achieve sales goals on a monthly, quarterly, and yearly basis Maintain precise work order files and formulas Pull appropriate products from the sales floor or warehouse Tint and mix products, as needed, to customer specifications Stock shelves and set up displays Clean store equipment Load/unload delivery trucks Assist in making deliveries, as needed Maintain in-stock and presentable condition assigned areas Remain knowledgeable on products offered and discuss available options Comply with inventory control procedures Suggest ways to improve sales Minimum Requirements: Must be at least eighteen (18) years of age Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future Must be able to read, write, comprehend, and communicate in English Must be able to read, write, comprehend, and communicate in Spanish Must have a valid, unrestricted Driver's License Must be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 70 lbs. on occasion Must be willing to work all scheduled hours, which may include evenings and weekends, with or without reasonable accommodation If internal to Sherwin-Williams, you must have received at least a “meets expectations” (3) rating on your most recent performance appraisal If internal to Sherwin-Williams, you must have completed all HR Cloud eLearning courses required for your current position Preferred Qualifications: Have at least a High School diploma or GED Have at least one (1) year experience working in a delivery, retail, or customer service position Have previous work experience selling paint and paint related products Have previous work experience operating tinting and mixing equipment

Business Purpose for Role The role of the Line PM Leader is to implement, maintain, and continuously improve the Maintenance Work Planning & Scheduling, Breakdown Elimination, and Defect Handling DMS for their line or area, and to provide a continuity link to other PM systems. The PM Leader is a member of the site PM Pillar Team. As the PM Leader, you are responsible for ensuring the efficient execution of Maintenance Systems for your line or area. Your other primary objective is to reduce stops in your area as well as build team capability and deliver superior quality safely through IWS tools and methodologies. This role is critical to deliver reductions in maintenance cost, standardization of maintenance procedures, and prevention of future failures. Responsibilities and Scope of Role Reduced # of breakdowns due to improper maintenance procedures. Through the updating of standards & procedures, maintenance costs (parts & labor) are reduced and in line with budget or on glide path. Equipment performance is controlled and predictable, due to percent increase of planned maintenance work (=> 90% planned work is the goal). Plan & Schedule Maintenance Work Review and prioritize notifications within 24 hours of generation. The work order backlog is current, sorted for reporting and is managed to best meet the CBN. Maintenance work is planned using “SIMPTWW”. A job plan archive is maintained. Lead the review of the previous job completion results, other maintenance activities and today's plan in the Daily Meeting. Plans should be adjusted accordingly based upon scheduled work, scheduled work completion and break in work. Lead the scheduling of maintenance work for the next week during the Weekly Planning Meeting. Ensure the revision and updating of “Maintenance Technical Documentation” occurs as necessary. Develop and update annual maintenance plan. Analyze failures to Eliminate Repeat Breakdowns Completes PM Cards. Completes Dice Charts for failures in department. Can initiate planned and scheduled inspections to prevent like failures and facilitate correction of any found defects. Follows site standards for in-depth failure analysis. Establish the team necessary to complete failure analysis when required. Effectively compare failed part against new part to identify all phenomenon Establishes Basic and Usage Condition for components. Detail and execute an improvement plan as an output of the failure analysis process. Standardizes the Results of the failure analysis and improvement activity by generating changes to AM CIL's, Maintenance Standards, Maintenance Procedures, Maintenance Inspections, and Spares Inventory. Communicates results and teaches improvements/standards via OPL and Kaizen Case Study. Track and Report Maintenance Indicator Results and In Process Measures Maintenance indicator results & in process measures is tracked and kept current. At a minimum, key (critical few) results and in process measures Activities or the lack there of, which drive maintenance indicator results in the wrong direction are corrected or brought to the attention of the appropriate resource. Results of maintenance indicators and in process measures are used to assess the progress of The DMS's and to determine equipment reliability. Results are shared with the department leadership in the weekly meeting. ·Develop Improvement Plans Improvements are identified through the tracking of PM Indicators & In Process Measures. Losses are identified and “Improvement Themes” developed to eliminate losses. Improvement Theme action plans are owned, developed, and tracked by the maintenance planner. ·Champion and Lead the Continuous Improvement Process Ensures all equipment design change proposals (corrective maintenance), Add/Delete/Modify work follows the Change Management Procedures. All work executed is critiqued and work plans updated or revised as necessary. Maintenance Technical Documentation and equipment drawings and schematics are complete, accurate, easy to find and easy to use. Develops a relationship with the store room in order to ensure part identification accuracy, identify obsolete parts, off quality parts, ideal in stock numbers, required delivery time of parts, etc. Updates to engineering drawings and standards are fed back to owner. There is a clear link to Engineering Drawing Control and a Maintenance Technical Documentation Owner is established. Actively coaches team members on IWS methodologies (finding and fixing defects, eliminating breakdowns to root cause, generating PM01's, PM03's, and notifications, etc.)

We are looking for a formulated intelligent controls and automation engineer to join our team! The formulated intelligent controls and automation engineer will assist Gillette's global manufacturing plants in the implementation of automated systems and controls at our factories. We want someone who can help us improve production processes through the development of intelligent control systems. This role involves designing, testing and implementing new technologies to optimize plant operations while ensuring safety standards are met. There will be up to 25% business travel would be required for this role as you will be working with our manufacturing plans located across the globe to roll out automated process for our Gillette razor blades. Job Responsibilities You will be responsible for designing, software development, managing the build, as well as installation/qualification of relevant equipment. Build technical mastery that will deliver equipment/machine design to deliver new product initiatives, obsolescence, supply chain optimization, and savings (cost, cash, and/or material savings). This role will specifically support chemistry (soap, extrusion) equipment. Developing standards and documents including Design Basis, User requirements document, controls narrative, and software design basis. Effectively reviewing and approving standard controls design documents and drawings. Verifying equipment controls Equipment and installations that meet the regulatory requirements throughout all phases of project Develop and troubleshoot controls system architecture via Programmable Logic Controllers (PLC), Human Machine Interface (HMI) and other industrial control devices. The team is hybrid usually onsite 3 days a week. Expectation is to be onsite daily when building equipment, validating, EO testing, etc. Travel can be up to 25% in peak equipment VAT and installation periods

At UniFirst, we're a global leader in uniform rental and facility service solutions for businesses across industries - from manufacturing and food processing to healthcare and hospitality. With a reputation for superior service and long-term customer partnerships, every uniform, product, and service we offer comes with integrity, commitment, and hard work. Come join a team that always delivers! Why Join Us?: Sell essential, recession-resistant services Represent a trusted brand with high customer retention Be part of a supportive sales team that offers consistent 1:1 coaching, ongoing sales learning, and real growth opportunities Position Summary: We're seeking a high-performing B2B Sales Representative to drive new business growth in an assigned territory. The ideal candidate thrives on prospecting, closing complex contracts, and building long-term relationships with business clients. Key Responsibilities: Prospect and qualify leads across a defined territory through cold calling, networking, referrals, and in-person visits Conduct on-site assessments and presentations for uniform rental, floor care, restroom, and facility service programs Develop tailored proposals and close multi-year service agreements Maintain and update CRM with accurate client information and activity Meet or exceed monthly and quarterly sales quotas Collaborate with service and operations teams to ensure seamless customer onboarding Compensation & Benefits Guaranteed base salary + monthly commission earnings Annual salary range: $55,000 - $120,000+ Monthly car allowance and fuel card Medical, dental, vision, 401(k) with match Paid time off and holidays Career advancement opportunities into Sales management or National Accounts Qualifications What We're Looking For: 0-2+ years of B2B sales experience (uniform rental, industrial supply, waste management, safety gear, or janitorial services preferred) Proven track record of exceeding sales targets and managing a full sales cycle Strong negotiation and closing skills Self-motivated and goal-oriented Willingness to take coaching and feedback Valid driver's license, clean driving record, and a reliable vehicle Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

Painter I In this job you will prepare surfaces and apply a variety of coatings to obtain high quality and primer finishes using paint booth and spray equipment. Position is 2nd shift ((2 pm to 10:30 pm) As a Painter I you will: Prepare surfaces for painting by cleaning and masking Check and prepare paint for use in spray equipment Maintain and adjust spray guns and associated equipment to ensure proper working condition Maintain spray booths and associated equipment to ensure proper working condition Ensure all paint related waste is properly labeled and disposed of and equipment is cleaned and in good working order Ensure job meets all requirements before leaving work center Maintain safe and clean working environment by complying with procedures, rules, and regulations Conserve resources by using equipment and supplies as needed to accomplish job results Contribute to team effort by training others in performance of painting tasks as needed Inspect all work prior to passing it on to the next operation Document actions by completing production and quality forms Communicate effectively with others at various levels of the organization. We are looking for someone who: Has a High School diploma, GED or combination of work experience and skill development Ideally has 0-1 year experience working in a manufacturing environment Is able to safely use small hand and power tools Is able to safety use spray paint and operate paint equipment Has basic computer skills Is able to read instructions and understand verbal instructions in English The physical demands of the job are: Work is classified as Medium - Heavy Physical Demand Level (PDL) by the US Dept of Labor's Dictionary of Occupational Titles Frequencies - Occasional (1-33%); Frequent (34-66%); Continuous (67-100%) Lifting Demands: Lift up to 75 pounds on an occasional basis floor to waist with assistance Lift up to 40 pounds on a frequent basis floor to waist Carry up to 40 pounds on an occasional basis up to 25 feet Push/Pull up to 40 pounds on a frequent basis Push/Pull more than 40 pounds on an occasional basis with assistance Postural Demands: Standing - continuous Walking - continuous Bending/stooping - frequent Squatting/kneeling - frequent Lifting - frequent Miscellaneous Demands: Griping, manipulation, fingering -continuous Variable hand/power tool use - frequent Two-person tasks using assistive devices for lifting, pulling and pushing including engine stands hand trucks, pallet jacks, and hoists Must remain medically cleared to wear respirator equipment What we offer you: Pay Range is typically between $20 - $23 per hour Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision Insurance Short and Long-Term Disability Life Insurance Health club membership program and reimbursement Employee Assistance Program Tuition Reimbursement 401 (k) Annual Profit Sharing Vacation Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: ******************************************* G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

The Industrial Wood Laboratory is seeking a Senior Group Leader to lead the development and commercialization efforts for new and existing products designed for Industrial Wood Market Segments. This individual will work closely with Industrial Wood Sales and Marketing to identify the needs and timelines for product development projects and will coordinate project activities with all the pertinent functions within SW. Job duties include contact with other employees and access confidential and proprietary information and/or other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company's staff, employees, and business relationships. At Sherwin-Williams, our purpose is to inspire and improve the world by coloring and protecting what matters. Our paints, coatings and innovative solutions make the places and spaces in our world brighter and stronger. Your skills, talent and passion make it possible to live this purpose, and for customers and our business to achieve great results. Sherwin-Williams is a place that takes its stability, growth and momentum and translates it to possibility for our people. Our people are behind the strength of our success, and we invest and support you in: Life … with rewards, benefits and the flexibility to enhance your health and well-being Career … with opportunities to learn, develop new skills and grow your contribution Connection … with an inclusive team and commitment to our own and broader communities It's all here for you... let's Create Your Possible At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commute-it matters to us. A general description of benefits offered can be found at ***************************** Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. • Align departmental activities to deliver on strategic goals for the Company in the areas of New Product Development. • Create opportunities and building strategic relationships, both internal and external. • Identifying high performing employees and build a cohesive and productive team to meet complex project solutions. • Effectively manage time and resources to ensure that projects work is delivered on long- and short-term goals. • Conduct formal performance reviews and addressing performance concerns • Effectively communicating projects and deliverables to team • Identify and understanding customer and project issues, while providing and implementing best course of action. • Create a culture of diversity and inclusion, along with a positive cooperative work environment. • Facilitate the professional and technical growth of team members • Written and verbal communication of team and project related information to key stakeholders and Senior Management • Communicate/interface with other departments and divisions including Technical, Marketing, Operations, Quality, Competitive, Supply Chain, Market Product Manager, Analytical. BASIC QUALIFICATIONS • Must be legally authorized to work in the country for which you are applying for employment (without now or in the future needing sponsorship for employment work visa and/or permanent residence status). • Bachelor's degree in a Science, Technology, Engineering or Math field. • Must be at least 18 years of age. • 5 years of experience in coating formulation and applications • 4 years of experience in managing/supervising direct report(s) • Must have previous project management experience • Must have a minimum of 5 years new product development experience PREFERRED QUALIFICATIONS • 10+ years of product development and/or commercialization experience is preferred • Knowledge or experience in Industrial Wood coating formulations and processing is preferred • Knowledge of the Industrial Coatings market and regulations • Training in Design of Experiments and Design for Six Sigma • Proven successful project management (of multiple projects) and leadership skills Travel Requirements: 20% Domestic and International This position is not eligible for sponsorship for work authorization now or in the future, including conversion to H-1B visa.

Job Title: Continuous Improvement and Lean Production System Manager Salary Range: $110,000.00 - 130,000.00 About us LSG Sky Chefs is one of the world's largest airline catering and hospitality providers, known for its outstanding reputation and dynamic approach in the industry. Voted “Airline Caterer of the Year in North America” for 2023 and 2024, we are committed to excellence and innovation, driven by the dedication and expertise of our talented employees. Our team members are the heart and soul of our success, consistently delivering exceptional culinary experiences and outstanding service to our clients and their passengers across North and Latin America. Role Purpose Statement As the Lean Manufacturing Manager, this role is responsible for driving operational excellence within the Customer Service Center (CSC) by implementing and sustaining lean methodologies aligned with corporate policies and customer expectations. The position ensures the continuous improvement of processes, cost efficiency, and service delivery, in close collaboration with regional and corporate teams. The role supports the CSC General Manager in achieving budgetary and performance goals. Main Accountabilities Lean Production & Operational Excellence Lead the deployment of the LSG Production System across the CSC, ensuring alignment with corporate and regional standards. Champion continuous improvement initiatives, including Kaizen events, root cause analysis, and waste elimination. Facilitate lean training and workshops to build internal capabilities and foster a culture of operational excellence. Collaborate with CSC leadership to define and execute improvement targets, monitor KPIs, and report performance metrics. Identify cost reduction opportunities and ensure delivery of productivity improvements that meet budget expectations. Promote cross-CSC knowledge sharing and best practice dissemination across the region. Leadership & Change Management Mentor and coach CSC department managers and key personnel on lean principles and production system methodologies. Act as a change agent, driving engagement and accountability for process improvements across all levels of the CSC. Support strategic initiatives by aligning lean efforts with broader business goals and customer satisfaction metrics. Knowledge, Skills and Experience Bachelor's degree in Industrial or Process Engineering, or equivalent experience. 5-7 years of experience in production/process improvement, with 3-5 years in a manufacturing or automotive environment. Demonstrated success in leading lean transformations and delivering measurable results. Strong facilitation skills with experience in leading cross-functional teams and workshops. Deep understanding of lean principles, including Toyota Production System methodologies. Six Sigma Black Belt, Green Belt, or Lean Master Certification preferred. Experience in Total Quality Management and organizational change initiatives is a plus. Excellent analytical, problem-solving, and communication skills. Proficient in Windows-based software and data analysis tools. LSG Sky Chefs is an EEO and Affirmative Action Employer of Women/Minorities/Veterans/Individuals with Disabilities.

This position is an essential part of Sherwin's manufacturing team. They supervise the installing, troubleshooting, repairing, and maintaining production and facility equipment to support production requirements and goals. They provide direct management of maintenance employees and leads and are accountable for fostering a team environment through effective and appropriate communication. They are responsible for maintaining all standards in accordance with safety, quality, inventory, and productivity levels as well as providing leadership to meet facility goals in the 5 focus areas of Operational Excellence including Safety, Quality, People, Service and Cost. Additional Information 1st Shift, 7:00am - 4:00pm, Monday - Friday This role supports a 24-hour, 7-days a week operation/manufacturing site Travel: 5% This position is also eligible for bonus based on performance and subject to the terms of the Company's applicable plans. Job duties include contact with other employees and access confidential and proprietary information and/or other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company's staff, employees, and business relationships. The selected internal candidate may qualify for the GSC Relocation Adjustment Program. Please click this link for more details. At Sherwin-Williams, our purpose is to inspire and improve the world by coloring and protecting what matters. Our paints, coatings and innovative solutions make the places and spaces in our world brighter and stronger. Your skills, talent and passion make it possible to live this purpose, and for customers and our business to achieve great results. Sherwin-Williams is a place that takes its stability, growth and momentum and translates it to possibility for our people. Our people are behind the strength of our success, and we invest and support you in: Life … with rewards, benefits and the flexibility to enhance your health and well-being Career … with opportunities to learn, develop new skills and grow your contribution Connection … with an inclusive team and commitment to our own and broader communities It's all here for you... let's Create Your Possible At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commute-it matters to us. A general description of benefits offered can be found at ***************************** Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. Oversee maintenance operations Implement operational policies and procedures Ensure effective and safe use of tools and equipment Monitor quality and productivity to ensure service and cost objectives are met Plan the daily work schedule by coordinating with outside vendors and internal departments Manage employee training, development, performance management, and corrective action Conduct regular communication meetings with workforce to enhance BMS (Business Management System) and Operational Excellence Participate in Continuous Improvement Projects Minimum Requirements: Must be at least 18 years of age Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future Must have at least one (1) year of work experience in a manufacturing, distribution, operations function or have completed a Sherwin-Williams Development Program in an Engineering function Preferred Qualifications: Have an associate's degree or higher in Maintenance, Science, Engineering, Business Administration, or Computer Science Have at least one (1) year of experience in leadership role(s), supervising others, or leading teams Have completed formal training in and/or have at least one (1) year of work experience applying continuous improvement tools such as Six Sigma, 5-S, Lean Manufacturing, Transactional Lean, etc. Have at least three (3) years of experience working as a mechanic in a manufacturing and/or distribution environment Have prior work experience using timekeeping and/or maintenance management systems

Product Development Assistants can advance their careers by gaining experience, taking on additional responsibilities, and pursuing professional development opportunities. With dedication and continuous learning, they can progress to senior-level positions or even venture into product management roles. In summary, a Product Development Assistant plays a crucial role in bringing products to life, working at the intersection of ideation, creation, and market launch. With a blend of analytical, communication, and teamwork skills, they contribute to the success of new products and the overall growth of the company. Responsibilities: This role will support the development of products from prototype to production, working closely with the sourcing, product development and manufacturing teams. Sample Management (receive, review, comment, organize, label, ship, and track) Lab Dips / Bulk Color Approvals (review, comment, track, and record) Coordinate/execute/track and record testing for fabric, wash performance and safety compliancy. Communicates with sales and tracks and records product development for all national account projects. Supports measuring and reviewing samples with the ability to suggest improvements as necessary and communicate findings clearly to factories and vendors. Creates and maintains technical packages for all multi-sourced and custom national account products. Discusses and reviews Tech Packs with Manager for feedback. Conducts fittings and creates fit reports if necessary. Assists in building UniFirst's digital product platform in PLM. Works with and reports to product development supervisor. Daily correspondence with international factories and manufacturing vendors. Maintains sample library for all sample types across all product categories. Qualifications Requirements: Degree in fashion, textile, technical design, or related interest Experience with measuring samples and recording and organizing data. 1-2 years of experience in the apparel industry. Experience with workwear and uniform a plus. Basic knowledge of apparel construction (all garment types), sewing, pattern making, grading, fabric, and trims. Strong verbal & written communication skills with the ability to take on tasks and see them through completion within expected timelines Ability to multi-task, proactively trouble shoot, problem solve, and adapt to a fast pace, constantly evolving environment. Must be able to move from one project to another to help keep prioritized projects on track. Strong attention to detail, self-motivated teammate. Ability to work independently, as well as part of a team. Computer proficiency in Adobe Creative Suite: Illustrator, Photoshop and Acrobat, PLM software, and MS Office: Excel and Word. The estimated hourly pay for this position ranges from $23.89 to $27.23 per hour. Actual compensation will vary based on factors including but not limited to the candidate's skills, experience, and qualifications. Geographic differentials may apply depending on the location where the position is filled. There is no application deadline for this role; recruitment will remain open until the position is filled. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Job Title: Transportation Supervisor - Airline Catering Salary Range: $68,000.00 - 82,000.00 About us LSG Sky Chefs is one of the world's largest airline catering and hospitality providers, known for its outstanding reputation and dynamic approach in the industry. Voted “Airline Caterer of the Year in North America” for 2023 and 2024, we are committed to excellence and innovation, driven by the dedication and expertise of our talented employees. Our team members are the heart and soul of our success, consistently delivering exceptional culinary experiences and outstanding service to our clients and their passengers across North and Latin America. Role Purpose Statement Seeking an outgoing, safety focused, candidate who thrives in a fast paced transportation and production environment and enjoys managing a group of employees that are focused on delivering a quality product to our customers. Additionally, this candidate needs to monitor and engage employees in all safety & performance initiatives. Main Accountabilities Supervisor Responsibility Ensure that the area of responsibility is properly organized, staffed and directed and that all delivery times are being met timely Conduct daily work group meetings Schedule and control staff to meet labour productivity and overtime targets Ensure compliance with all government regulatory agencies standards (example: Food and Drug Administration (FDA), United Stated Department of Agriculture (USDA), Occupational Safety and Health Administration (OSHA), Environmental Protection Administration (EPA), Department of Transportation (DOT), Hazard Analysis and Critical Control Points (HACCP), etc.) Document and follow up on all department processes in order to implement improvements Ensure on-time and accurate production and/or catering of all flights Monitor and ensure compliance with all safety regulations Other duties as deemed necessary Leadership Guide, motivate and develop staff within the Human Resources policies Make the company's values and management principles live in the department(s) Manage productivity hours and costs in the area of responsibility; initiate and steer corrective actions in case of deviations Participate and support company sponsored initiatives such as Quality, HACCP, Lean Manufacturing, Employee Safety and Production systems Knowledge, Skills and Experience Bachelor's degree or equivalent knowledge required In addition, one to three years of related work experience required Problem solving and leadership skills Strong interpersonal and communication skills Ability to develop and lead others to obtain desired results & achieve productivity goals Working knowledge of OSHA, Good Manufacturing Practice (GMP), FDA, USDA and EPA regulations Excellent verbal, written and organizational skills required along with the ability to multi-task Good knowledge of Microsoft Office and Windows-based computer applications LSG Sky Chefs is an EEO and Affirmative Action Employer of Women/Minorities/Veterans/Individuals with Disabilities.

Job Title: Food Safety Quality Assurance Coordinator Salary Range: $18.00 - 25.00 per hour About us LSG Sky Chefs is one of the world's largest airline catering and hospitality providers, known for its outstanding reputation and dynamic approach in the industry. Voted “Airline Caterer of the Year in North America” for 2023 and 2024, we are committed to excellence and innovation, driven by the dedication and expertise of our talented employees. Our team members are the heart and soul of our success, consistently delivering exceptional culinary experiences and outstanding service to our clients and their passengers across North and Latin America. Role Purpose Statement Primary responsibility is to maintain the “Global Quality System” of LSG Sky Chefs to ensure the Customer Service Center (CSC) is in compliance with customer, Federal Drug Administration (FDA), US Department of Agriculture (USDA), and Seafood Hazard Analysis and Critical Control Points (HACCP) plans including USDA and FDA regulatory standards. Main Accountabilities Maintain and initiate all recordkeeping and key performance indicators pertinent to the Quality Department and GQS to include, but not limited to Food Safety, Sanitation, Regulatory Agencies (County Health, State Health Dept. and FDA), internal customers and airline customers Daily monitor of Good Manufacturing Practices (GMPs) for compliance Verify of coolers and freezer room temperature for compliance Perform environmental swabs and microbiological sampling, submittal to local laboratory for analysis Obtain Chef Table samples to verify compliance to specification Assist the Quality Manager in specific training and daily initiatives addressing quality, food safety, and sanitation issues to drive process improvements Conduct work station inspections to verify compliance (gold standard verification, specs, sanitizer, food temperatures, HACCP documentation, phf set-up) Conduct portion control weight compliance to specifications Conduct inspection checks (dispatch, galley, non-bonded, bonded, equipment) Verify Hazard Analysis and Critical Control Points (HACCP) logs and other documents are accurately completed on a daily basis Create charts, trending reports, training materials and visuals Maintain, monitor standards and train employees in compliance to the Regulated Garbage Standards to meet USDA requirements Supports the Jump-off (commissary) locations with oversight Train hourly employees as needed Perform other tasks as requested Knowledge, Skills and Experience High School Diploma or equivalent Proficient in using computer and basic software such as Microsoft, create and maintain trending charts, SOP's, use of calculator, weight scales, and thermometers, metal detector, ATP testing equipment, mechanical food portioning and processing equipment. Previous food industry and quality assurance experience a plus Ability to work in cold environment ( Ability to work with minimum to no supervision, act in liaison of the Supervisor, self-starter, and problem solver. Ability to lift/push a minimum of 25 lbs. Strong mathematical, analytical, verbal, written, interpersonal and organizational skills Ability to work in fast paced environment with large groups Must be flexible to work weekends/holidays LSG Sky Chefs is an EEO and Affirmative Action Employer of Women/Minorities/Veterans/Individuals with Disabilities.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Pay Range: ($24.00/hr - $38.00/hr) Target Bonus: 5.0% Req ID: 27586 Summary Fori Automation, a Lincoln Electric company, is a global leader in designing and integrating automated assembly, welding, material handling, and testing systems. We deliver world-class automation solutions to leading manufacturers worldwide. We're seeking an experienced Mechanical Designer to join our Weld Systems team in Shelby Township, MI. In this role, you'll design and develop mechanical systems for automated welding equipment, ensuring precision, performance, and manufacturability. At Lincoln Electric, we invest in our people. In addition to competitive pay, we offer an annual bonus plan, tuition reimbursement, comprehensive medical/dental/vision benefits, 401(k) with company match, paid time off, and many other outstanding benefits. What You'll Do Develop mechanical concepts and detailed designs using 2D and 3D CAD tools. Focus design on tooling and fixture creation. Create accurate Bills of Materials (B.O.M.) and design documentation. Apply engineering calculations to verify design integrity (e.g., beam stress). Utilize standard designs, specifications, and part/vehicle data to build robust systems. Organize and maintain CAD files in accordance with company and project standards. Select appropriate materials and components for optimal performance and cost. Ensure all designs meet NAAMS standards and relevant industry standards for construction, safety, and ergonomics. Collaborate with cross-functional teams to deliver high-quality automation systems on time. Required Education & Experience Bachelor's degree in Mechanical Engineering preferred (or equivalent experience). 1+ year of design/layout experience (or 2+ years in a similar role without degree). Experience designing MIG and/or resistance weld machines preferred. Proficiency in 3D CAD (Inventor, SolidWorks, or similar) and 2D AutoCAD. Strong grasp of manufacturing principles, materials, and design best practices. Ability to perform basic engineering calculations and apply advanced algebra and design techniques. Team-oriented mindset with the ability to thrive in an ISO9001:2000 environment Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

This is a key role within the Financial Systems team, serving as a functional leader for UniFirst's multi-year Oracle Fusion Cloud ERP implementation, which is approaching its first major release. The individual in this role will collaborate closely with Finance leadership, functional leads, internal IT partners, cross-functional business teams, and external systems integration partners. Leveraging extensive ERP expertise, this team member will provide strong application stewardship for our stakeholders. A primary responsibility will be to help drive efforts to optimize the fit and performance of systems supporting our financial functions. Acting as a vital liaison with IT counterparts, this leader will ensure seamless integration between ERP modules and enterprise boundary systems within end-to-end business processes. This leader will play an essential role in supporting UniFirst's daily operations. Additionally, the individual in this role will cultivate an ongoing partnership with UniFirst's business controls and internal audit teams to drive continuous improvement in control performance and risk mitigation. Responsibilities: Serve as Finance Oracle Fusion Cloud ERP subject matter expert for functionality and capabilities in support of UniFirst Finance's continuous process transformation and overall business needs. Work with counterparts to ensure Oracle Fusion Cloud ERP functional adoption and forward roadmap stays in tight alignment with current and future business requirements. Help build and grow Oracle Fusion Cloud ERP functional support team within Financial Systems including financial modules and connected areas in overall Support Services. Partner with IT-centered testing center to mobilize the most efficient and repeatable regression process possible, considering Oracle Fusion Cloud and integrated enterprise applications, to keep current on quarterly cloud release cycle. Create process and structured approach to assist the organization in strategic evaluation, socialization and adoption of beneficial Oracle-delivered enhancements from Oracle's quarterly release stream. Support financial integration of present and future acquisitions, including phased approaches with GL consolidation followed by full operational integration Support the completion of financial close, guide and support efforts to optimize close duration without undermining system controls, SOX requirements or company policy. Support continuous advancement of financial process documentation and flows to support financial processes, projects, and investment requests. Gather, document, and analyze Finance requirements. Support adjacent tracks efforts to do the same in HR, Procurement and Supply Chain. Work closely with Enterprise PMO and IT PMO teams to inform work planning and prioritization. Operate as Finance leader with emerging internal resource capacity and utilization planning process and tools - support resource demand detailing and resource pool planning to realize roadmap execution. Qualifications Bachelors Degree in Accounting/Finance or Information Systems, with complimentary credentials preferred. Extensive experience with Oracle Cloud ERP or other large market equivalent across multiple application tracks, including very large system implementations. Minimum of five (5) years of Business Analysis experience as well as Program Management (PMO) experience. Proven ability to drive the development of dashboard reporting, including KPI/Metrics and project statuses. Excellent Excel, Word, and PowerPoint skills, high level of system literacy (position has heavy level of interaction with IT organization). Experience with SOX activities and controls, interfacing with Internal Audit and resolving process and control issues. Outstanding communication (verbal & written) skills, leadership capabilities, and organization skills. Knowledge and experience with Oracle Fusion Cloud ERP and PeopleSoft Financials, working knowledge of Order to Cash concepts. The estimated annual salary for this position ranges from $121,899 to $150,000. Actual compensation will vary based on factors including but not limited to the candidate's skills, experience, and qualifications. Geographic differentials may also apply depending on the position's location. There is no application deadline for this role; recruitment will remain open until the position is filled. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Application Engineer 1 - Gas Spring - Industrial This Application Engineering position is in our Industrial Division which is housed at our U.S. Corporate Headquarters in Gastonia, NC. The Application Engineer 1 plays a pivotal role in ensuring the correct application and integration of Stabilus gas spring and damper products into customer designs. This role ensures that technical solutions align with customer needs, internal engineering standards, and production capabilities. The engineer will work closely with customers and internal teams; including sales, engineering, launch, and production, to provide technical guidance, documentation, and process improvements that enhance overall customer solutions as well as sales and launch-related operational efficiency. Essential Job Functions: Technical Application & Simulation: Utilize simulation software to size and apply Stabilus standard gas spring products in customer applications. Design custom gas spring solutions using internal calculation software, ensuring alignment with Stabilus design standards and best engineering practices. Provide technical drawings and specifications for prototype development and ensure customer acceptance of designed solutions. Confirm the feasibility of manufacturing during the initial design phase, and upon customer design acceptance, initiate the introduction to full-scale production. Project & Operational Support: Manage tasks or assist with broader project segments under the guidance of senior engineers. Review customer prints and ensure compatibility with Stabilus products, noting and communicating any required deviations. Coordinate with the prototype shop to facilitate sample production and customer approval processes. Leadership & Contribution to the Team: Offer technical guidance to peers and support sales teams with technical insights. Identify opportunities for internal process improvements and contribute to centralized technical documentation. Participate in team knowledge-sharing initiatives and cross-functional collaboration efforts. Customer Engagement & Support: Serve as a technical contact for customer inquiries, providing product recommendations and troubleshooting support. Communicate directly with customers, distributors, and sales representatives via phone, email, and occasional site visits. Assist in preparing and delivering technical training sessions for internal teams and external partners as needed. Secondary Duties: Monitor industry and competitor advancements, reporting any relevant developments to the company. Provide support for trade shows, pilot production start-ups, quality troubleshooting, and customer visits to enhance technical engagement. Participate in testing and validation efforts to ensure products meet application requirements. Education, Training, Certifications: Bachelor's degree in Mechanical Engineer or related technical field. Strong foundational knowledge of engineering principles, with an eagerness to learn industry-specific applications. Proficiency in general simulation and design software. Experience: 1-3 years of related experience preferred but not required. Prior experience in product design, customer supporting technical role or prototype development is a plus. Demonstrated problem-solving skills and ability to work collaboratively within a technical team. Key Competencies: Strong analytical skills with a problem-solving mindset. Ability to interpret engineering drawings and technical specifications. Strong customer service and relationship management skills. Ability to work both independently and in a team environment. Job Knowledge and Skills: Software Skills: Proficiency in 2D and 3D CAD, Microsoft 365 Office, and SAP; experience with CRM tools such as SAP C4C. Interpersonal Skills: Strong ability to communicate and problem-solve effectively with all facets of the company and external customers. Supervisory Skills: None required at this level. Contact with Others: Direct communication with customers, sales teams, engineering, and production teams to facilitate project execution and technical support. Resourcefulness and Initiative: Requires creativity and problem-solving ability to develop solutions and improve processes; relies on experience and judgment to plan and accomplish goals. Key Performance Metrics (KPIs): Technical Performance: Accuracy and completeness of application designs; resolution time for technical inquiries. Project Execution: On-time completion of assigned projects and deliverables. Internal Process Contribution: Participation in process improvements, documentation updates, and knowledge-sharing initiatives. Training & Development: Completion of required internal training modules and certifications within the first 12 months. Cross-Functional Collaboration: Responsiveness and effectiveness in supporting sales, production, and customer service teams. Travel: Domestic Travel: Occasional travel for customer visits, prototype evaluations, industry trade shows, and training opportunities. International Travel: Infrequent travel for training or collaboration with global teams. Expected Frequency: Approximately 1-4 days per quarter, depending on business needs. Accountability/Impact of Errors: Accountability: Responsible for correct application and technical soundness and integrity of product applications. Impact of Errors: Incorrect application could lead to loss of business to competitors, field failures, potential safety risks, liability concerns, safety recalls. Confidential Data: Yes. Must adhere to internal data security policies. Access to customer specifications, pricing, and proprietary Stabilus designs and drawings, requiring discretion and confidentiality. Career Progression: The Application Engineer 1 position is an entry-level role in the Applications Engineering team. Employees in this position are expected to develop proficiency in Stabilus product applications, customer support, and project management over time. Promotion to Application Engineer 2 requires demonstrated competency in independent project management, advanced technical proficiency, and direct contributions to process improvements. Career progression beyond Application Engineer 2 includes opportunities for specialization in technical leadership roles (Senior Application Engineer, Principal Application Engineer) or transition into managerial tracks (Application Engineering Manager). Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.