Staff engineer jobs in Albuquerque, NM

The Electrical Engineer II designs, develops, modifies and evaluates electronic parts, components or integrated circuitry for electronic equipment, or other hardware systems and/or electrical engineering applications. In this role, one selects components and equipment based on analysis of specifications and reliability as well as determines design approaches & parameters. Conducts general engineering and design of electronic systems on small unmanned aircraft vehicles with cross-functional teams. May also review vendor capability to support product development. Position Responsibilities Performs simulation and detailed design for digital and analog circuits Drives system integration, assembly procedures, and test procedures Documents designs with engineering drawings and written descriptions Trouble-shoots complex systems from a hardware and software perspective Designs, builds, and tests prototypes expediently and efficiently. Works with avionics, embedded systems, and RF links Writes software to support the integration of sensors and embedded processors Designs and implements circuit boards. This includes architecture, component selection, schematic capture, board layout, board bring-up, and documentation Performs electronic engineering support activities on R&D projects Performs design & analysis tasks and writes fabrication & test procedures Works on problems of moderate scope where analysis of situations or data requires a review of a variety of factors Other duties as assigned Basic Qualifications (Required Skills & Experience) B.S. Degree in Electrical Engineering or related discipline is required or equivalent combination of education, training, and experience Minimum of 2 - 5 years of relevant experience Experienced using Altium Designer for schematic capture and PCB layout Experienced in one or more areas: Radio Frequency (RF), embedded control, FPGA Experienced with power electronics, including motors and lithium batteries Demonstrated ability to troubleshoot complex systems Demonstrated familiarity with common industry protocols (LVDS, I2C, HDMI, UART, SPI, CAN, USB) Strong knowledge of Engineering fundamentals, mathematics, physics & material properties Familiarity with Small UAV subsystems and associated software Proficient with office software, computer-based productivity tools and other software tools in one's area of expertise Some travel may be required in support of flight test operations (up to 30%) Must have a clean driving record Other Qualifications & Desired Competencies Advanced degree is preferred Flight test or R/C (Remote Control) experience preferred Demonstrated ability of hands-on experience with tools is preferred Consistently complies with company's policies and procedures Follows standard practices and procedures when analyzing situations or data from which answers can be readily obtained. Completes assigned tasks within schedule and budget Skilled at building productive internal/external working relationships and offers guidance to Associate Engineers. Shares ideas and experiences with others, solicits feedback and asks relevant questions Develops professional expertise and applies company policies & procedures to resolve a variety of issues Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Takes ownership and responsibility for current and past work products Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Has effective problem-solving, analytical, interpersonal and communication skills Team Player - Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands Ability to work in an office and manufacturing environment (Constant) Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) Clearance Level No Clearance The salary range for this role is: AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

Merrick & Company's High Performance Facilities (HPF) team is seeking an experienced Mechanical Facilities Engineer III to provide HVAC and Plumbing design for a wide range of national defense projects in our Albuquerque, NM office. From multi-building campuses to secure facilities across the globe, the Merrick HPF team designs and delivers sustainable solutions to meet Government needs for resiliency, readiness, and reliability. Our work directly impacts the operation and efficiency of installations vital to the protection and defense of the United States. Annual salary range for this position is $102,400.00 - $132,600.00. Base pay offered may vary depending on job-related knowledge, skills, and experience. WHAT YOU'LL DO The Mechanical Facilities Engineer III will design HVAC and Plumbing/Piping systems for an exciting range of mission critical to mission support projects. Project work will encompass: * Plan, conduct, and coordinate detailed phases of HVAC and Plumbing design work with calculations, process flow diagrams, piping and instrumentation diagrams, layout of mechanical equipment and associated duct and piping systems, and sequences of operations. * Develop mechanical construction and equipment specifications, test and inspection plans, and system design descriptions. * Evaluate, select, and apply standard techniques, procedures, and criteria to perform a task or sequence of tasks for projects with less complex features, but also collaborate and use judgment to determine adaptations in methods for non-routine aspects of assignments and more complex projects. * Perform engineering quality assurance checks of project designs. * Support new project proposals with mechanical discipline scopes, budget estimates, and schedules. * Interface with and present designs to Federal, State, and Local government client contacts. The Mechanical Facilities Engineer III will be a key member of a multi-disciplinary team of architectural and engineering staff producing project design packages of drawings, specifications, and calculations. The position includes great leadership opportunity with task assignment and work coordination with engineers, designers, and administrative staff. Periodic travel to other Merrick offices or project site locations, including international travel, may be required. REQUIRED QUALIFICATIONS * Degree Requirements: Bachelor of Sciences in Mechanical Engineering. * Minimum eight (8) years of experience. * Professional Engineering (P.E.) License required. * Ability to obtain a Department of Defense security clearance. * Experience in HVAC and plumbing/piping systems design and associated engineering calculations (e.g. Air-handling systems, laboratory fume hood exhaust air systems, duct systems, heating and chilled water hydronic piping systems, natural gas piping systems, domestic water and waste water piping systems, steam and condensate piping systems, compressed air systems, and mechanical system controls). * Experience sizing and selecting HVAC and plumbing/piping equipment (e.g. air-handling units, fans/blowers, pumps, cooling towers, chillers, boilers, coils, HEPA filtration systems, dampers, valves, and controls). * Proficient in editing and writing mechanical construction and equipment specifications. * Proficient in Microsoft Word and Excel. * Experience using HVAC computer load and design programs such as Trane Trace software; knowledge of Revit building information modeling software; and familiarity with AutoCAD. * Working knowledge of ASHRAE, SMACNA, and NFPA standards. * Working knowledge of IMC, IPC, and IBC codes. * The client projects for this position require U.S. Citizenship. DESIRED QUALIFICATIONS * LEED or Green Globes accreditation PERKS * Employee Owned - all eligible U.S. employees have an Employee Stock Ownership Account. * Robust Employee Referral Program. * Annual performance and compensation reviews. * Professional Training and Development. * Employee Recognition Awards. * Peer Mentor Program * And Much More! ADDITIONAL INFORMATION * Apply online only. No e-mail, hard copy or third-party resumes accepted. * At Merrick, every resume is carefully reviewed by our team of experienced human recruiters-never by AI. We are committed to a fully human-centered hiring process, ensuring each candidate receives thoughtful, personalized attention at every stage. * Merrick & Company offers a competitive compensation and benefits package which includes health insurance, dental and vision coverage, 401(k), and paid time off (PTO). * Merrick is an Equal Opportunity Employer, including disability/vets. * Employment with Merrick is contingent upon completion of a pre-employment background check, MVR check, and drug screen. * Degree Requirements: Bachelor of Sciences in Mechanical Engineering. * Minimum eight (8) years of experience. * Professional Engineering (P.E.) License required. * Ability to obtain a Department of Defense security clearance. * Experience in HVAC and plumbing/piping systems design and associated engineering calculations (e.g. Air-handling systems, laboratory fume hood exhaust air systems, duct systems, heating and chilled water hydronic piping systems, natural gas piping systems, domestic water and waste water piping systems, steam and condensate piping systems, compressed air systems, and mechanical system controls). * Experience sizing and selecting HVAC and plumbing/piping equipment (e.g. air-handling units, fans/blowers, pumps, cooling towers, chillers, boilers, coils, HEPA filtration systems, dampers, valves, and controls). * Proficient in editing and writing mechanical construction and equipment specifications. * Proficient in Microsoft Word and Excel. * Experience using HVAC computer load and design programs such as Trane Trace software; knowledge of Revit building information modeling software; and familiarity with AutoCAD. * Working knowledge of ASHRAE, SMACNA, and NFPA standards. * Working knowledge of IMC, IPC, and IBC codes. * The client projects for this position require U.S. Citizenship. The Mechanical Facilities Engineer III will design HVAC and Plumbing/Piping systems for an exciting range of mission critical to mission support projects. Project work will encompass: * Plan, conduct, and coordinate detailed phases of HVAC and Plumbing design work with calculations, process flow diagrams, piping and instrumentation diagrams, layout of mechanical equipment and associated duct and piping systems, and sequences of operations. * Develop mechanical construction and equipment specifications, test and inspection plans, and system design descriptions. * Evaluate, select, and apply standard techniques, procedures, and criteria to perform a task or sequence of tasks for projects with less complex features, but also collaborate and use judgment to determine adaptations in methods for non-routine aspects of assignments and more complex projects. * Perform engineering quality assurance checks of project designs. * Support new project proposals with mechanical discipline scopes, budget estimates, and schedules. * Interface with and present designs to Federal, State, and Local government client contacts. The Mechanical Facilities Engineer III will be a key member of a multi-disciplinary team of architectural and engineering staff producing project design packages of drawings, specifications, and calculations. The position includes great leadership opportunity with task assignment and work coordination with engineers, designers, and administrative staff. Periodic travel to other Merrick offices or project site locations, including international travel, may be required.

What you do at AMD changes everything We care deeply about transforming lives with AMD technology to enrich our industry, our communities and the world. Our mission is to build great products that accelerate next-generation computing experiences - the building blocks for the data center, artificial intelligence, PCs, gaming and embedded. Underpinning our mission is the AMD culture. We push the limits of innovation to solve the world's most important challenges. We strive for execution excellence, while being direct, humble, collaborative and inclusive of diverse perspectives. This is who we are at our best. One Company. One Team. AMD together we advance_ Product Cybersecurity Engineer-185024 THE ROLE: The Core Markets Engineering team is a fast paced and dynamic group made up of Center of Excellences (CoE)s that include Cybersecurity, Functional Safety and Embedded Software. Our charter is to support and develop high quality solutions in each of these CoEs. THE PERSON: In this role you would demonstrate strong skills in hardware/software design and development in security applications to support the Security CoE. The target platform the candidate will work on includes the state-of-the-art Adaptive Compute Acceleration Platform (ACAP). KEY RESPONISIBILITES: Define market requirements for next generation platforms and solutions Develop security architectures in support of customer driven use cases Support Secure Development Lifecycle Activities including TARA, Penetration Testing, internal red teams, etc. Develop hardware and software components of reference design development with SoCs and ensure quality and on-time delivery Work cross-functionally with marketing and other engineering groups to architect reference designs/framework solution that meets or exceed customer requirements Work hands-on in developing hardware/software applications Participate and resolve critical customer support cases Develop and review critical customer facing documentation (User Guides, Application Notes, White Papers) to enhance user experience PREFERRED EXPERIECE Team Player, Well Organized and Willingness to travel Proficient in security/cybersecurity concepts Understanding of the application of security into products and systems Understanding of various security certifications (e.g. Common Criteria and/or FIPS) is desired Experience in logic fundamentals and FPGA design Use of simulation and verification techniques Verilog/VHDL Hands on experience with integration and test Knowledge of ARM-based Embedded Systems Meet one or more of the following Knowledge of other Embedded OS such as RTOS Knowledge of symmetric and asymmetric multi-processing systems and standards such as open AMP Knowledge of Embedded Hypervisors Knowledge of Trusted Execution Environment (OP-TEE desirable) Knowledge of ARM TrustZone Technology Excellent communication skills, both written and oral Ability to work in fast paced and fun multitasking environment ACADEMIC CREDENTIALS: Recent graduate with higher level EE, EE/CS, or CE degree LOCATION: Albuquerque, NM #LI-DA1 Requisition Number: 185024 Country: United States State: New Mexico City: Albuquerque Job Function: Design Benefits offered are described here. AMD does not accept unsolicited resumes from headhunters, recruitment agencies or fee based recruitment services. AMD and its subsidiaries are equal opportunity employers. We consider candidates regardless of age, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third party affiliation, sex, pregnancy, sexual orientation, gender identity, military or veteran status. Please click here for more information.

Join Our Team as a Field Engineer at Water Works Engineers! Meet Water Works Engineers: Water Works Engineers (WWE) is a leading civil and environmental engineering firm specializing in innovative and sustainable solutions for water infrastructure projects across the United States. For over 20 years, we have excelled in planning, designing, and implementing projects involving the treatment, storage, and conveyance of drinking water, recycled water, and wastewater. With offices in Scottsdale, AZ; Redding, Roseville, San Mateo, San Diego, and Los Angeles, CA; Star, ID; Albuquerque, NM; and Salt Lake City, UT, we bring an understanding and sensitivity to Western water and wastewater issues. Our expertise includes water and wastewater treatment, stormwater management, hydraulic modeling, and environmental compliance. Committed to innovation, integrity, and teamwork, we enhance the sustainability and resilience of the communities we serve. Why this role matters: As a Field Engineer based in our Albuquerque office, you will be on the front lines of project execution-playing a vital role in ensuring that construction aligns with our technical standards, safety protocols, and environmental values. Your work will directly impact the successful delivery of water, wastewater, and recycled water systems that serve real people and solve real challenges. This is more than just oversight; it's hands-on problem-solving, real-time coordination, and boots-on-the-ground leadership that makes a lasting difference. Whether you're resolving issues in the field, supporting contractor accountability, or contributing to long-term infrastructure resilience, your contributions will be critical to every project's success-and to your own professional growth. Water Works Engineers is committed to delivering sustainable, high-performance water infrastructure that strengthens communities across New Mexico and the greater Southwest. In this role, you won't just observe progress-you'll help drive it. Your daily impact: Provide field-based construction management and engineering support for water and wastewater infrastructure projects. Collaborate with engineers, contractors, and project managers to verify work is performed in conformance with contract documents and permits. Prepare daily reports and track construction progress, documenting key work activities, conditions, schedule issues, and QA/QC activities. Review and manage submittals, RFIs, PCOs, COs, and other construction documentation. Assist in coordinating change management processes and documenting field adjustments for record drawings. Support field inspections, monitor contractor compliance with design intent, and identify and report non-conformance issues. Coordinate and track quality assurance efforts, including special inspections and third-party testing. Help ensure jobsite compliance with SWPPP requirements and safety standards. Troubleshoot field engineering issues and work with project leadership to recommend timely, practical solutions. Participate in construction meetings and contribute to communication among stakeholders to maintain progress and alignment. Stay up to date on industry practices and field-based project delivery methods. What you bring to the table: Bachelor's degree in Engineering (any discipline) from an accredited institution. 3-7 years of experience in construction management, field engineering, or project delivery of civil infrastructure projects. EIT or PE license is preferred, but not required. Strong working knowledge of construction means and methods, project specifications, permitting, and contract documentation. Familiarity with project management tools and construction administration processes (e.g., RFIs, submittals, change orders). Experience with Microsoft Office Suite (Word, Excel, Outlook); familiarity with Procore, Bluebeam, or similar tools is a plus. Excellent communication, organization, and time management skills. Ability and willingness to perform field-based tasks and interface directly with construction teams. Valid driver's license and ability to travel between multiple project sites in New Mexico. Unlock Your Benefits Potential: On day one, as a full-time employee, Water Works Engineers employees enjoy a comprehensive benefits package to enhance their well-being and financial stability on their first employment day which includes: Paid Time Off: Eight paid holidays annually, with paid time off (PTO) accrual based on role. 401K Retirement Plan: Company match of 100% on the first 6% of your salary, with immediate eligibility. Health Insurance: Fully covered for employee-only plans, with the company contributing significantly towards family coverage. Dental and Vision Insurance: Fully covered for employees, with affordable options for family coverage. Life and Disability Insurance: Provided at no cost. Additional Benefits: Health Care Flexible Spending Account, Adoption Assistance, Employee Assistance Program, and Commuter Benefits. Water Works Engineers fosters a supportive environment where your contributions are valued, and your career can thrive. Rewards for Your Expertise Competitive salary commensurate with experience (contact HR for location-specific details). Employees may be eligible for bonuses based on individual and company performance. We reward standout contributions and share success when possible-because your impact matters! Why work with us: Are you tired of feeling stuck in your current position -no client exposure, limited growth opportunities, just being a number, and not winning awesome, impactful projects in your area? If so, join our winning team at Water Works Engineers! Here, you can work on amazing local projects that make a real difference in your community. As part of a smaller, highly successful engineering firm, you'll enjoy greater visibility, direct client interaction, and a clear path for career advancement. Your contributions will be recognized and valued, allowing you to grow and thrive in an environment that fosters innovation and excellence. Join us today: If you are a passionate and dedicated engineer ready to make a significant impact, we want to hear from you! Water Works Engineers embraces Equal Employment Opportunity and is committed to fostering a diverse workforce. EOE, Minorities, Females, Vets, and disabled candidates are encouraged to apply. To protect our applicants from job scams, please be cautious of fraudsters posing as Water Works Engineers employees or recruiters. We never request sensitive personal information, such as Social Security numbers or bank details, via text, instant message, or unsecured methods, nor do we require advance payments for equipment or fees. Official communications from Water Works Engineers will only come from emails ending in ‘@wwengineers.com'. For your safety, apply directly to our open positions at ******************************************************** Visit ftc.gov/jobscams for tips on avoiding and reporting job scams.

NV5 is a provider of engineering and consulting services to public and private sector clients, delivering solutions through six business verticals: Testing, Inspection & Consulting; Infrastructure; Utility Services; Environmental Health Sciences; Buildings & Program Management; and Geospatial Technology. With offices nationwide and abroad, NV5 helps clients plan, design, build, test, certify, and operate projects that improve the communities where we live and work. As engineers, architects, construction/program managers, environmental professionals, and beyond, we play a significant role in shaping our communities through the services we provide. We are looking for passionate, driven individuals to join our team focused on Delivering Solutions and Improving Lives . The successful candidate should be an Engineer in Training (EIT) or be able to obtain EIT within 6 months. Success in this position requires a person who can adapt to a variety of personalities and business conditions and can work within a multidiscipline team. The person must possess skills in problem solving and critical thinking, and must be steadfast in the execution of assigned duties. The person needs to be an effective leader and collaborator with an ability to manage a fleet of Soil/Concrete Technicians, Special Inspectors, and Laboratory staff. Responsibilities Manages special inspectors and technician staff Manages projects and associated budgets Prepares and reviews inspection and observation reports submitted to various agencies and other clients. Plans, assigns, prioritizes, evaluates, and reviews the work of special inspectors and technicians; and support staff for consistency, accuracy, timeliness, conformance to guidelines and technical merit. Oversees the preparation and submission of timely reports and maintenance of records Develops, implements, and interprets policies, procedures, and programs for special inspection and testing Communicates, interprets, and keeps current on changes in observation and inspection guidelines and regulations. billings versus budget through regular meetings with Principals. Oversight of all Materials testing on soils, asphalt, and concrete. Oversight of all IBC Special Inspections in accordance with IBC Chapter 17 Good driving record, willing to travel Oversight of laboratory qualifications Qualifications BS in civil engineering with emphasis in geotechnical a plus A minimum of 2 years of relevant experience. Ability to work as part of a multi-disciplinary team, think creatively, and problem solve. Reviewing technical specifications and filed/laboratory reports. knowledge of building codes and construction industry standards. Experience with AASHTO and ASTM test methods pertaining to construction materials, including HMA, aggregate, soils, steel, masonry, and concrete. Experience reviewing concrete/asphalt mix designs. Thorough understanding of accreditation policies for all relevant agencies including AMRL, CCRL, IAS, etc. Proficiency in computer applications, including MS Office. Strong verbal and written communication skills NV5 offers a competitive compensation and benefits package including medical, dental, life insurance, PTO, 401(k), and professional development/advancement opportunities. NV5 provides equal employment opportunities (EEO) to all applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. NV5 complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #LI-KS1

NV5 is a provider of engineering and consulting services to public and private sector clients, delivering solutions through six business verticals: Testing, Inspection & Consulting; Infrastructure; Utility Services; Environmental Health Sciences; Buildings & Program Management; and Geospatial Technology. With offices nationwide and abroad, NV5 helps clients plan, design, build, test, certify, and operate projects that improve the communities where we live and work. As engineers, architects, construction/program managers, environmental professionals, and beyond, we play a significant role in shaping our communities through the services we provide. We are looking for passionate, driven individuals to join our team focused on Delivering Solutions and Improving Lives. The successful candidate should be an Engineer in Training (EIT) or be able to obtain EIT within 6 months. Success in this position requires a person who can adapt to a variety of personalities and business conditions and can work within a multidiscipline team. The person must possess skills in problem solving and critical thinking, and must be steadfast in the execution of assigned duties. The person needs to be an effective leader and collaborator with an ability to manage a fleet of Soil/Concrete Technicians, Special Inspectors, and Laboratory staff. Responsibilities * Manages special inspectors and technician staff * Manages projects and associated budgets * Prepares and reviews inspection and observation reports submitted to various agencies and other clients. * Plans, assigns, prioritizes, evaluates, and reviews the work of special inspectors and technicians; and support staff for consistency, accuracy, timeliness, conformance to guidelines and technical merit. * Oversees the preparation and submission of timely reports and maintenance of records * Develops, implements, and interprets policies, procedures, and programs for special inspection and testing * Communicates, interprets, and keeps current on changes in observation and inspection guidelines and regulations. billings versus budget through regular meetings with Principals. * Oversight of all Materials testing on soils, asphalt, and concrete. * Oversight of all IBC Special Inspections in accordance with IBC Chapter 17 * Good driving record, willing to travel * Oversight of laboratory qualifications Qualifications * BS in civil engineering with emphasis in geotechnical a plus * A minimum of 2 years of relevant experience. * Ability to work as part of a multi-disciplinary team, think creatively, and problem solve. * Reviewing technical specifications and filed/laboratory reports. * knowledge of building codes and construction industry standards. * Experience with AASHTO and ASTM test methods pertaining to construction materials, including HMA, aggregate, soils, steel, masonry, and concrete. * Experience reviewing concrete/asphalt mix designs. * Thorough understanding of accreditation policies for all relevant agencies including AMRL, CCRL, IAS, etc. * Proficiency in computer applications, including MS Office. * Strong verbal and written communication skills NV5 offers a competitive compensation and benefits package including medical, dental, life insurance, PTO, 401(k), and professional development/advancement opportunities. NV5 provides equal employment opportunities (EEO) to all applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. NV5 complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #LI-KS1

Collabera is ranked amongst the top 10 Information Technology (IT) staffing firms in the U.S., with more than $525 million in sales revenue and a global presence that represents approximately 12,000+ professionals across North America (U.S., Canada), Asia Pacific (India, Philippines, Singapore, Malaysia), and Europe (Ireland, Netherlands, Poland, United Kingdom). We support our clients with a strong recruitment model and a sincere commitment to their success, which is why more than 75% of our clients rank us amongst their top three staffing suppliers. Not only are we committed to meeting and exceeding our customer's needs, but also are committed to our employees' satisfaction as well. We believe our employees are the cornerstone of our success and we make every effort to ensure their satisfaction throughout their tenure with Collabera. As a result of these efforts, we have been recognized by Staffing Industry Analysts (SIA) as the “Best Staffing Firm to Work For” for five consecutive years since 2012. Collabera has over 50 offices across the globe with a presence in ten countries and provides staff augmentation, managed services and direct placement services to global 2000 corporations. For consultants and employees, Collabera offers an enriching experience that promotes career growth and lifelong learning. Visit ***************** to learn more about our latest job openings. Awards and Recognition --Staffing Industry Analysts: Best Staffing Firm to Work For (2016, 2015, 2014, 2013, 2012) --Staffing Industry Analysts: Largest U.S. Staffing Firms (2016, 2015, 2014, 2013) --Staffing Industry Analysts: Largest Minority Owned IT Staffing Firm in the US. Job Description A Fortune 100 aerospace giant hiring Manufacturing engineer responsible for supporting New Product Introduction (NPI) including planning and execution of new production line start up for avionics. The successful candidate would be coordinating with suppliers and engineering to analyze layout of equipment, workflow, assembly methods, and capacity. Position details: Client: Fortune 100 aerospace giant Job Title: Manufacturing engineer Location: Albuquerque, NM 87113 Job Summary: · Analyze BOM's and develops cost reduction strategies and initiatives with engineering early in the development cycle and oversees all aspects of execution. · Responsible for all aspects of manufacturability assessments by ensuring product complexity analysis is completed and design engineering has simplified: Bill of Materials, process, tooling, and assembly labor. · Position also is responsible to ensure obsolescence strategies have been developed prior to entry into production. · Role is heavily responsible for in depth cross organization coordination between all functional organizations. Role is expected to be able to develop in depth manufacturing plans. · Able to lead workshops in cost reduction, DFx, or DFm. Qualifications · Requires a bachelor's degree in engineering or equivalent industry experience and 2-4 years of experience in the field or in a related area. · Strong skills with excel, PowerPoint, Visio. · Lean Six Sigma or Black Belt skills. · Prior manufacturing experience planning new product introduction of circuit board assemblies or box build assemblies at a contract manufacturer. Additional Information If you want to know more and apply, please connect with: Niraj Singh **************************** ************ ************************************************

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like Are you looking for an opportunity to contribute to a highly motivated team focused on delivering qualified electronic components for a national security mission? The Advanced RF Integrated Circuits (ICs) and Microsystems Department (5255) is seeking an experienced IC designer who is knowledgeable in modern RF, analog, and digital design techniques, as well as IC fabrication, testing, qualification, and the delivery of custom-designed systems on a chip. The selected candidate will assume a leadership role within a team that interfaces with technology developers and application customers to improve system performance through new understanding and integration across a broad range of technologies, including subthreshold RF, analog and mixed-signal components (semiconductor and piezoelectric) for radar, communication, IoT, solid-state electronic devices, high-speed interconnects and integration, and devices that exploit new nanoscale materials and physics. * Lead IC designs within our internal radiation-hardened technologies as well as modern external foundries * Plans, conducts, and executes Sandia's science and engineering programs within the spectrum of fundamental research, development, or demonstration * Play a key technical role in developing new ideas and proposals for research activities including junior staff * Communicate results and findings to peers and sponsors through presentation, and peer reviewed publications * Review/Write specifications for RF components used in radar systems * Identify, develop, and pursue new technology opportunities in areas that support Sandia mission activities The selected applicant can be a remote worker located in any U.S. State or District of Columbia. Regular or periodic travel to your assigned work location may be required. Salary Range $157,100 - $267,000 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * Master's in Electrical Engineering plus eight years or more years' relevant experience * RF or high-speed integrated circuit design using Cadence Virtuoso * Experience in radio frequency design including electromagnet modeling and analysis, frequency analysis, noise analysis, power matching analysis, radiation hardening by design and/or link budget analysis * Ability to obtain and maintain a DOE Q-level security clearance Qualifications We Desire * PhD in Electrical Engineering plus five (5) years' of relevant experience or proven experience designing LNA, mixer, power amplifiers, RF and analog filters, high speed analog, and PLL blocks * Strong written and presentation skills to provide sponsors and vendors convincing evidence of quality designs * Ability to work independently and within a multi-disciplinary team of peers to meet specifications * Strong interpersonal skills which include teamwork, effective leadership, negotiation, delegation, and conflict resolution * Understanding of: * fabrication process for integrated circuits * die attaching, wirebonding, and packaging * advanced automated assembly processes for die and very small SMT components * Experience: * developing complex microsystem solutions including analog, digital, RF, and other technologies * modeling electromagnetic effects on and off die * heterogeneously integrating die onto various dielectric interposers or PCBs to maintain signal integrity and improve throughput * Interest in enabling next-generation advances in quantum information, ultra-low-power RF microsystems, electromagnetic interference mitigation, and high-speed heterogeneous integration. * Demonstrated oral, written, and technical writing skills to provide sponsors and vendors convincing evidence of quality designs * Experience with/in: Analog and RF modeling using commercially available simulation tools in semiconductor, electromagnetic, and/or optical Integrated circuit design using Cadence, Mentor Graphics, Synopsis, ADS, HFSS, EMX * Multiple peer reviewed published papers in the field of integrated circuit design * Active DOE Q or DOD TS security clearance About Our Team The RF ICs and Microsystems department performs research, design, modeling, characterization, and qualification of RF microelectronics. We have a focus on efficient, high performance RF component design, electromagnetic modeling, as well as novel wireless sensor development. We have capabilities for developing between prototypes to fully qualified hardware. We provide unique solutions to our customers in nuclear weapons, DoD, non-proliferation agencies, and subsystem departments (SAR, surety, & ISR). Our research interests include advanced RF sensors, low power communication devices, quantum computing electromagnetics, advanced radar component design, and next generation resonators for clocks unique to national security applications. Join this team to make a difference for our nation and work toward your individual goals. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Apply for Job * Careers * Sign In * New User

Packaging Equipment Engineer III, Albuquerque, NM Build your future at Curia, where our work has the power to save lives Curia is a global contract development and manufacturing organization (CDMO) with over 30 years of experience partnering with pharmaceutical and biotech companies to provide life-saving treatments to patients. At Curia, we are on a mission to advance our customers' therapies from curiosity to cure and ultimately to improve patients' lives. We proudly offer Generous benefit options (eligible first day of employment) Paid training, vacation and holidays (vacation accrual begins on first day of employment) Career advancement opportunities Education reimbursement 401K program with matching contributions Learning platform And more! Summary: The Packaging Equipment Engineer will be responsible for supporting daily packaging operations, ensuring optimal performance, reliability, and compliance of all packaging equipment within a GMP-regulated pharmaceutical manufacturing environment. This role will lead and support equipment optimization, troubleshoot technical issues, implement process improvements, and collaborate closely with cross-functional teams including Production, Maintenance, Quality, Validation, and Supply Chain. In addition, the candidate will provide technical mentorship to junior engineers and mechanics, reviews and approves engineering documentation, and collaborates with cross-functional teams to ensure compliance with GMP, safety, and regulatory requirements. By driving equipment performance and improvement initiatives, this role directly contributes to efficient, compliant, and safe pharmaceutical manufacturing operations. Essential Duties and Responsibilities: Provide technical support for daily packaging operations, ensuring minimal downtime and consistent product quality. Lead equipment troubleshooting and root cause analysis to resolve mechanical, electrical, or automation issues. Develop and execute optimization projects to improve line efficiency, reduce waste, and enhance equipment performance. Collaborate with cross-functional teams (Production, Maintenance, Engineering, Validation, and Quality) to ensure smooth operation and compliance with cGMP standards. Author and review equipment-related documentation, including SOPs, change controls, CAPAs, and technical reports. Conduct root cause analyses for recurring or high-impact equipment issues and implement long-term corrective and preventive actions (CAPAs). Support installation, qualification, and validation (IQ/OQ/PQ) of new or modified packaging equipment. Identify opportunities for continuous improvement in packaging processes and equipment reliability. Ensure compliance with all relevant regulatory and safety requirements (FDA, EMA, OSHA, etc.). Manage and coordinate vendor support for equipment maintenance and upgrades. Provide technical training to operators and maintenance personnel on equipment functionality and best practices. Education and Experience: Bachelor's degree in Engineering or related field, Mechanical preferred. Minimum of five (5) years' experience in packaging equipment within the manufacturing environment. Pharmaceutical, biotechnology, or medical device industry a plus. Strong understanding of GMP, cGMP, and FDA regulations preferred. Hands-on experience with packaging lines (vials, labeling, cartoning, serialization, etc.). Proficiency in troubleshooting mechanical and automation systems (PLC, sensors, servos, HMIs). Demonstrated experience managing equipment improvement or capital projects. Supervisory Responsibilities: This role does not have supervisory responsibilities, yet it will involve mentoring, guiding, and advising other junior staffs. Language Skills: The ideal candidate should have the ability to read and interpret various documents, such as safety instructions, standard operating procedures, technical procedures, and governmental regulations in US English. Additionally, the person should possess strong written and verbal communication skills, along with effective presentation skills. Mathematical Skills: Proficient in executing arithmetic operations including addition, subtraction, multiplication, and division across various units of measurement, employing whole numbers, fractions, decimals, and percentages. Candidates must possess a strong grasp of algebraic and geometric principles. Reasoning Ability: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Computer Skills: The ideal candidate will possess a strong technical foundation and proven capability in effectively utilizing diverse software tools to streamline the organization's daily functions. Essential skills encompass adeptness in manufacturing and internet software, alongside proficiency in Microsoft Office tools including PowerPoint, Excel, Word, and Outlook. Other Skills and Abilities: Provides guidance and mentorship to team members Fosters a collaborative and positive work environment Champions change Promotes a safe and healthy work environment by actively identifying and addressing potential hazards, following established safety protocols, participating in safety training programs, and fostering a culture of awareness and responsibility among team member. Demonstrates strong attention to detail Excellent Communication ( both verbal and written), teamwork, and problem solving skills Ability to organize time to successfully manage multiple projects and priorities Ability to read, understand, interpret, and implement technical writing and instructions Effective interpersonal relation skills, while maintaining the adaptability to achieve company goals Verbally expresses ideas and facts in a clear, logical, concise, and accepted grammatical style Ability to manage multiple priorities in a fast-paced production environment. Other Qualifications: Must pass a background check Must pass a drug screen May be required to pass Occupational Health Screening Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The essential physical demands will vary for each Curia position. All positions may require regular or occasional lifting, pushing and pulling up to 10 pounds, frequently; up to 25 pounds occasionally; and up to 50 pounds infrequently. Additionally, all positions entail regular sitting, standing and reaching, with some roles requiring prolonged periods of time for each activity. Visual acuity, both close and distant, along with depth perception is necessary in each role, with or without corrective lenses. Please note that employees are prohibited from wearing contact lenses in work areas with exposure to cleaning agents. Hand and finger dexterity are integral to all positions, with specific activities varying from typing to manipulating maintenance tools or operating keypads, switches, and buttons. Occasional stooping, kneeling, twisting, crouching, crawling and balancing are also part of each position's physical requirements. Certain roles may involve climbing and working at elevated heights as well. Work Environment: The work environment characteristics, described below, are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The working environments will vary for each Curia position. The employee may be required to work in an office, manufacturing, or warehouse environment. The office environment is designed for comfort and productivity, with room temperature settings maintained for optimal working conditions. It is common to hear conversational noise in the background. The pharmaceutical manufacturing environment is sterile. Therefore, aseptic gowning is required. Personal protective equipment (nitrile gloves, clean room socks, face-shields, safety glasses, aprons, steel-toed shoes and powered air purifying respirators) is necessary, depending upon the task at hand. The employee may be exposed to wet and/or humid conditions, confined areas, and refrigerator or freezer temperatures when working in a sterile environment. The warehouse environment is typically set at a controlled temperature but the employee may be exposed to refrigerator or freezer temperatures when retrieving materials. Some positions may occasionally be exposed to moving mechanical parts, elevated heights, airborne particles, electrical activities and vibration. In addition, some positions may work with or be exposed to, compressed gases and must wear ear protection. All environments may be subject to working with or being exposed to cleaning agents. Education, experience, location and tenure may be considered along with internal equity when job offers are extended. We do not accept unsolicited assistance from any headhunters or recruitment firms for any of our job openings. All resumes or profiles submitted by search firms to any employee at Curia, in any form without a valid, signed search agreement by an authorized signatory in place for the specific position, approved by Talent Acquisition, will be deemed the sole property of Curia. No fee will be paid in the event the candidate is hired by Curia because of the unsolicited referral. All interested applicants must apply online. Please be aware of scammers. Curia will only send offer letters and requests for sensitive personal information from a curiaglobal.com email address. Curia is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Curia is an E-Verify employer.

Packaging Equipment Engineer III, Albuquerque, NM Build your future at Curia, where our work has the power to save lives. Curia is a global contract development and manufacturing organization (CDMO) with over 30 years of experience partnering with pharmaceutical and biotech companies to provide life-saving treatments to patients. At Curia, we are on a mission to advance our customers' therapies from curiosity to cure and ultimately to improve patients' lives. We proudly offer * Generous benefit options (eligible first day of employment) * Paid training, vacation and holidays (vacation accrual begins on first day of employment) * Career advancement opportunities * Education reimbursement * 401K program with matching contributions * Learning platform * And more! Summary: The Packaging Equipment Engineer will be responsible for supporting daily packaging operations, ensuring optimal performance, reliability, and compliance of all packaging equipment within a GMP-regulated pharmaceutical manufacturing environment. This role will lead and support equipment optimization, troubleshoot technical issues, implement process improvements, and collaborate closely with cross-functional teams including Production, Maintenance, Quality, Validation, and Supply Chain. In addition, the candidate will provide technical mentorship to junior engineers and mechanics, reviews and approves engineering documentation, and collaborates with cross-functional teams to ensure compliance with GMP, safety, and regulatory requirements. By driving equipment performance and improvement initiatives, this role directly contributes to efficient, compliant, and safe pharmaceutical manufacturing operations. Essential Duties and Responsibilities: * Provide technical support for daily packaging operations, ensuring minimal downtime and consistent product quality. * Lead equipment troubleshooting and root cause analysis to resolve mechanical, electrical, or automation issues. * Develop and execute optimization projects to improve line efficiency, reduce waste, and enhance equipment performance. * Collaborate with cross-functional teams (Production, Maintenance, Engineering, Validation, and Quality) to ensure smooth operation and compliance with cGMP standards. * Author and review equipment-related documentation, including SOPs, change controls, CAPAs, and technical reports. * Conduct root cause analyses for recurring or high-impact equipment issues and implement long-term corrective and preventive actions (CAPAs). * Support installation, qualification, and validation (IQ/OQ/PQ) of new or modified packaging equipment. * Identify opportunities for continuous improvement in packaging processes and equipment reliability. * Ensure compliance with all relevant regulatory and safety requirements (FDA, EMA, OSHA, etc.). * Manage and coordinate vendor support for equipment maintenance and upgrades. * Provide technical training to operators and maintenance personnel on equipment functionality and best practices. Education and Experience: * Bachelor's degree in Engineering or related field, Mechanical preferred. * Minimum of five (5) years' experience in packaging equipment within the manufacturing environment. Pharmaceutical, biotechnology, or medical device industry a plus. * Strong understanding of GMP, cGMP, and FDA regulations preferred. * Hands-on experience with packaging lines (vials, labeling, cartoning, serialization, etc.). * Proficiency in troubleshooting mechanical and automation systems (PLC, sensors, servos, HMIs). * Demonstrated experience managing equipment improvement or capital projects. Supervisory Responsibilities: This role does not have supervisory responsibilities, yet it will involve mentoring, guiding, and advising other junior staffs. Language Skills: The ideal candidate should have the ability to read and interpret various documents. These documents include safety instructions, standard operating procedures, technical procedures, and governmental regulations. Additionally, the candidate should possess strong written and verbal communication skills. They should also possess effective presentation skills, enabling them to successfully present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: Proficient in executing arithmetic operations including addition, subtraction, multiplication, and division across various units of measurement, employing whole numbers, fractions, decimals, and percentages. Candidates must possess a strong grasp of algebraic and geometric principles. Reasoning Ability: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Computer Skills: The ideal candidate will possess a strong technical foundation and proven capability in effectively utilizing diverse software tools to streamline the organization's daily functions. Essential skills encompass adeptness in manufacturing and internet software, alongside proficiency in Microsoft Office tools including PowerPoint, Excel, Word, and Outlook. Other Skills and Abilities: * Provides guidance and mentorship to team members * Fosters a collaborative and positive work environment * Champions change * Promotes a safe and healthy work environment by actively identifying and addressing potential hazards, following established safety protocols, participating in safety training programs, and fostering a culture of awareness and responsibility among team member. * Demonstrates strong attention to detail * Excellent Communication ( both verbal and written), teamwork, and problem solving skills * Ability to organize time to successfully manage multiple projects and priorities * Ability to read, understand, interpret, and implement technical writing and instructions * Effective interpersonal relation skills, while maintaining the adaptability to achieve company goals * Verbally expresses ideas and facts in a clear, logical, concise, and accepted grammatical style * Ability to manage multiple priorities in a fast-paced production environment. Other Qualifications: * Must pass a background check * Must pass a drug screen * May be required to pass Occupational Health Screening There may be other qualifications to add, ad hoc, such as the below: * May be required to obtain and maintain media qualification * May be required to wear a respirator Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The essential physical demands will vary for each Curia position. All positions may require regular or occasional lifting, pushing and pulling up to 10 pounds, frequently; up to 25 pounds occasionally; and up to 50 pounds infrequently. Additionally, all positions entail regular sitting, standing and reaching, with some roles requiring prolonged periods of time for each activity. Visual acuity, both close and distant, along with depth perception is necessary in each role, with or without corrective lenses. Please note that employees are prohibited from wearing contact lenses in work areas with exposure to cleaning agents. Hand and finger dexterity are integral to all positions, with specific activities varying from typing to manipulating maintenance tools or operating keypads, switches, and buttons. Occasional stooping, kneeling, twisting, crouching, crawling and balancing are also part of each position's physical requirements. Certain roles may involve climbing and working at elevated heights as well. Work Environment: The work environment characteristics, described below, are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * The working environments will vary for each Curia position. The employee may be required to work in an office, manufacturing, or warehouse environment. * The office environment is designed for comfort and productivity, with room temperature settings maintained for optimal working conditions. It is common to hear conversational noise in the background. * The pharmaceutical manufacturing environment is sterile. Therefore, aseptic gowning is required. Personal protective equipment (nitrile gloves, clean room socks, face-shields, safety glasses, aprons, steel-toed shoes and powered air purifying respirators) is necessary, depending upon the task at hand. The employee may be exposed to wet and/or humid conditions, confined areas, and refrigerator or freezer temperatures when working in a sterile environment. * The warehouse environment is typically set at a controlled temperature but the employee may be exposed to refrigerator or freezer temperatures when retrieving materials. * Some positions may occasionally be exposed to moving mechanical parts, elevated heights, airborne particles, electrical activities and vibration. In addition, some positions may work with or be exposed to, compressed gases and must wear ear protection. * All environments may be subject to working with or being exposed to cleaning agents. Education, experience, location and tenure may be considered along with internal equity when job offers are extended. We do not accept unsolicited assistance from any headhunters or recruitment firms for any of our job openings. All resumes or profiles submitted by search firms to any employee at Curia, in any form without a valid, signed search agreement by an authorized signatory in place for the specific position, approved by Talent Acquisition, will be deemed the sole property of Curia. No fee will be paid in the event the candidate is hired by Curia because of the unsolicited referral. All interested applicants must apply online. Please be aware of scammers. Curia will only send offer letters and requests for sensitive personal information from a curiaglobal.com email address. Curia is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Curia is an E-Verify employer.

RESPONSIBILITIES: Candidate will be responsible for the following tasks, using a combination of internal contributors, outside suppliers, Product Design Engineers and design teams. - Play significant leading role in product development and mechanical architecture definition for next generation products - Ensure product meets the Marketing feature requirements and Industrial Design goals - Manage and coordinate Product Design priorities, ensure schedules are met, and enable through collaboration the cross-functional teams - Manage the development, specifications, design and manufacturing for mechanical systems, i.e. housing, structures, Display, Audio, Batteries, RF Shielding, Thermal properties etc. - Ensure compliance with Regulatory and Environmental mechanical specifications - Prepare early design layouts and drive product architecture - Research new materials, processes, and aggressive technologies to meet product goals - Implement aggressive Industrial Design fit and finishes - Ensure Tool architecture and final specification are to company standards

RESPONSIBILITIES: Candidate will be responsible for the following tasks, using a combination of internal contributors, outside suppliers, Product Design Engineers and design teams. - Play significant leading role in product development and mechanical architecture definition for next generation products - Ensure product meets the Marketing feature requirements and Industrial Design goals - Manage and coordinate Product Design priorities, ensure schedules are met, and enable through collaboration the cross-functional teams - Manage the development, specifications, design and manufacturing for mechanical systems, i.e. housing, structures, Display, Audio, Batteries, RF Shielding, Thermal properties etc. - Ensure compliance with Regulatory and Environmental mechanical specifications - Prepare early design layouts and drive product architecture - Research new materials, processes, and aggressive technologies to meet product goals - Implement aggressive Industrial Design fit and finishes - Ensure Tool architecture and final specification are to company standards

RESPONSIBILITIES: Candidate will be responsible for the following tasks, using a combination of internal contributors, outside suppliers, Product Design Engineers and design teams. - Play significant leading role in product development and mechanical architecture definition for next generation products - Ensure product meets the Marketing feature requirements and Industrial Design goals - Manage and coordinate Product Design priorities, ensure schedules are met, and enable through collaboration the cross-functional teams - Manage the development, specifications, design and manufacturing for mechanical systems, i. e. housing, structures, Display, Audio, Batteries, RF Shielding, Thermal properties etc. - Ensure compliance with Regulatory and Environmental mechanical specifications - Prepare early design layouts and drive product architecture - Research new materials, processes, and aggressive technologies to meet product goals - Implement aggressive Industrial Design fit and finishes - Ensure Tool architecture and final specification are to company standards

If you are a self-motivated professional who is looking to take on more responsibility in leading projects related to MEP building design, while seeking an employer that will focus on your specific career goals delivering high-quality professional services, then we encourage you to strongly consider this position. With top tier benefits, and the understanding of a real work life balance, Wilson & Company provides a career-nurturing work environment. Wilson & Company's Albuquerque, NM office is seeking a Lead Mechanical Engineer with to provide task and project management skills and to design construction plans, specifications and studies for a variety of projects. This professional will be responsible for studies and designs of facilities including federal, educational, industrial, municipal and commercial projects. Experience in HVAC and Plumbing design is required. Roles and Responsibilities: Mentorship of junior staff. Effectively fosters relationships with team members and clients, as well as industry stakeholders and regulators. Participates in business development activities, such as; marketing, developing project win strategies, and preparing technical data for proposals and interviews. Ensure quality management with implementation of quality control standards. Creation and management of the Mechanical scope of work for the project. Oversee development of detailed design drawings Sizing, selection and layout of mechanical equipment. Develop project specifications to meet the performance requirements. Client interaction and coordination. Develop and maintain progress, quality control, schedule, staffing planning and coordination with project management including regular reporting. Coordination of communications between the project team, the engineering and design team members to assure quality of work, and that consistent technical content drawing/design packages are maintained throughout a project. Required Qualifications: Bachelor of Science degree in Mechanical Engineering or Architectural Engineering in an ABET-accredited college or university. A minimum of 5 years of experience with mechanical design of facilities. Currently a licensed professional engineer in New Mexico or within a year of obtaining a New Mexico license. Experience with MEP software such as Revit MEP is a plus. Experience with AutoCAD and MicroStation is a plus. Experience in the preparation of work plans, budgets and project schedules is highly desired. Please note that Wilson & Company is not currently sponsoring applicants for work visas. Annual Salary Range: $84,000 - $167,000+ (based on experience) About Us: Wilson & Company has a rich history in planning and design, and the right candidate will become part of our bright future. We provide multidisciplinary engineering, architecture, surveying, mapping, environmental, and planning services, and employ staff throughout 16 offices in 9 states. The firm was founded in 1932 and provides services to a diverse client base including railroads; municipal, state, and federal agencies; energy, industrial, and commercial companies; and private developers. The cornerstone of our success is Higher Relationships, standards in Discipline, Intensity, Collaboration, Shared Ownership, and Solutions. Discipline is doing it right, with attention to details without exception. Intensity is doing what it takes to meet and exceed expectations. Collaboration is working together and bringing out the best in each other. Shared Ownership means we adopt the goals of others as our own. Finally, Solutions are achieved in a win-win environment. We value this commitment to Higher Relationships with our employees, clients, and the communities where we live and work. And for you, our culture intends to help you achieve personal and professional success. Come grow with us! Wilson & Company provides a comprehensive benefits package that encourages employee health and well-being. We have several options to choose from for health insurance, life insurance, disability insurance, paid time off, and retirement savings plan benefits. We are proud to be an EEO/AA employer M/F/D/V. We maintain a drug-free workplace and perform pre-employment background checks. Wilson & Company is a federal contractor and subject to various health and safety regulations enforced by federal, state, and local agencies, as well as health and safety requirements of our clients. Wilson & Company is committed to complying with all regulations and requirements, which could include, but are not limited to, vaccination requirements, testing requirements, masking requirements, and personal protective equipment requirements. All regulations and requirements are subject to change, which could impact Wilson & Company policy and requirements for employees.

Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets - we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space - our world class Space Systems team is empowering some of the boldest and most ambitious space missions SENIOR R&D PROCESS ENGINEER Based out of Rocket Lab's site in Albuquerque, New Mexico, the Senior R&D Process Engineer will work in an R&D environment to develop new processes and improve existing capabilities for the manufacture of cutting-edge III-V solar cell products. You will support the Process Engineering Manager, with deliverables required for internal leadership, board of directors, and investors. WHAT YOU'LL GET TO DO: Lead/contribute to semiconductor fabrication process development projects to advance new products from concept phase through manufacturing phase Develop a detailed understanding of the design, construction, manufacturing methods, and operating principles of series interconnected multi-junction solar cells and their operation in the space environment Develop an understanding of the relationship between fabrication process and device performance, cost, reliability, and manufacturability Some examples include Mask design, photolithography, Wet etch, Metal deposition, Wafer thinning Write process recipes, work instructions with process and engineering controls, and develop an understanding of fabrication tool functionality. Help troubleshoot tool issues and process-related device issues including hands-on work in a clean-room Contribute technical innovation to improve product value and increase market share, including new device designs, manufacturing methods, and manufacturing cost reduction and analysis Develop sufficient expertise with available modeling, growth, fabrication, test, and design tools to recommend better methods, improved designs and upgrade opportunities Assume ownership and accountability for successful completion of research projects and customer programs Interact with outside vendors to procure tools and equipment for fabrication of devices Report results both internally and externally with presentations and formal reports Develop strong working relationships across the organization. Train and work closely with technicians and operators Develop understanding of the customer base and design requirements for space solar cells and other products Use analysis tools such as Excel, JMP and presentation tools such as Word and PowerPoint to develop thoughtful and correct analyses and conclusions of projects, and present those conclusions to others in a convincing and confident manner YOU'LL BRING THESE QUALIFICATIONS: Bachelors in materials science, electrical engineering, physics, or other engineering field 5+ years of experience working with semiconductors Experience with common III-V (Arsenide & Phosphide) semiconductor fabrication techniques Experience with fabrication process development and familiarity with semiconductor device manufacturing methods THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Experience in manufacturing and aerospace preferred Experience with growth or testing of optoelectronic devices Experience with solar cell device design/theory Experience in a production-oriented manufacturing facility ADDITIONAL REQUIREMENTS: Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing Must be physically able to commute to buildings Occasional exposure to dust, fumes and moderate levels of noise WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at ***********************.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

About Us: We are committed to finding smart solutions that enable an intelligent and seamless world. Our success as a world-class leader in technology has evolved from humble beginnings. In 1896, the enterprising father and son team of A.J. and George A. Briggs partnered with S.A. Buffington, a Chicago lawyer, to establish Chicago Telephone Supply Company (later to become CTS). Today, CTS is a leading designer and manufacturer of sensors, actuators, and electronic components for suppliers and original equipment manufacturers. We have over 20 locations in 12 countries and more than 3,500 employees. Our innovative sensing, connectivity, and motion solutions offer a diverse range of products across diversified end markets including transportation, medical, aerospace and defense, and industrial. We are at the forefront of supporting innovating life-changing technology, focusing on quality to keep people safe, healthy, and happy. Job/Position Summary The Manufacturing Engineer (Shaping) reports directly to the MFG Engineering Manager and supports the ceramic piezo and RF business. This position will oversee the manufacturing processes involved in machining ceramic materials. Major Areas of Responsibility Leads and directs the monitoring and troubleshooting of manufacturing processes to maintain/increase product yields and quality through the utilization of an array of continuous improvement tools (DOE, DMAIC, Six Sigma, Green Belt) and general statistical analysis methods. Recommends and implements lean processes and products that improve manufacturing capabilities efficiencies, yields and quality with emphasis on ceramic machining processes. Machining process optimization: Develop and optimize machining processes for ceramic materials to improve efficiency, quality, and cost-effectiveness. Including selection of appropriate equipment, machining parameters, and cutting tools. Provide diagnostic, recommendations for maintaining, upgrade existing equipment or acquisition of new equipment. Quality Assurance: Implement quality control measures to ensure that machined ceramics meet specifications and standards. Develop/maintain inspection protocols and collaborate with quality control teams to perform regular inspection and audits. Work closely with new product introduction team to efficiently and cost effectively introduce new products into manufacturing. Provides technical leadership to technicians, engineers, and operators. Reports and interfaces process and project status and progress to management in oral and written communications. Also, interfaces with suppliers, and customers. Uses technical knowledge and ingenuity to resolve complex problems and provides technical leadership for their area of responsibility. Works independently and periodically reports status to engineering management and plant manufacturing management. Required Knowledge, Skills, and Abilities Ability to analyze and identify problems, develop appropriate solutions, and implement with available resources to complete complex assignments. Ability to proactively develop new ideas/methodologies for continuous improvement. Ability to interact with other professional staff throughout the organization. Required Education and Experience B.S. in Mechanical Engineering, Materials Science or related discipline is required. Solid understanding of machining principle and experience with CNC machining equipment is required. Proficiency in CAD/CAM software. Knowledge of ceramic materials and their machining characteristics is preferrable. Knowledge of continuous improvement methods is required. Knowledge of SAP is plus. Physical/Working Requirements Use of personal protective equipment (PPE). Exposure to moderate noise levels and occasional use of chemicals. Extended periods of standing combined with sitting and walking. Be able to lift up to 25 lbs. Join Us At CTS, one of the ways we recognize the value of our employees is through our comprehensive benefits program. Highlights of our benefits program for full-time employees include: Health Benefits 401K Paid Time Off Holiday Pay Employee Assistance Program Paid Parental Leave Pet Insurance Tuition Reimbursement Ready to shape the future? Apply now to join a world leader in sensing and connectivity. United States EEO Statement CTS Corporation is an affirmative action/equal opportunity employer who complies with all applicable federal, state and local employment laws. In order to provide equal employment and advancement opportunities to all individuals, employment decisions at CTS Corporation will be based on merit, qualifications, and abilities. It has been and shall continue to be both the official policy and the commitment of CTS Corporation to further equal employment opportunities for all persons regardless of, among other characteristics, race, religion, color, national origin, sex, sexual orientation, gender identity, age, genetic information, status as a protected veteran or status as a qualified individual with a disability, or any other characteristics protected by applicable Federal, State or Local law. ADA accommodation statement: If you require reasonable accommodation in the application process, call Human Resources at ************. All other applications must be submitted online. United States Additional Considerations It is unlawful in all states where the Company operates, including Massachusetts, to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates applicable laws may be subject to criminal penalties and civil liability. The Company does not require a lie detector test as a condition of employment nor continued employment. Applicants must have valid work authorization that does not now and/or will not in the future require sponsorship of a visa for employment authorization in the United States. No agencies, please. We do not accept any unsolicited resumes and are not looking to engage an agency. We receive inquiries from agencies daily. Do not direct any inquiries or emails to hiring managers. It is not our standard practice to utilize agencies; we are a federal contractor and need to comply with the same process for all. Global Privacy Policy Click Here to Read CTS' Privacy Policy ***************************************

GNI is seeking a Project Integration Engineer to support our customer at Kirtland AFB, NM. As the Technical Project Engineer for the Space Systems Command, your responsibility is to support and oversee all information technology aspects of ground system integration and maintenance. You will work closely with a team of engineers and technicians to ensure the success of the mission. Your job includes designing and implementing new technology solutions, troubleshooting technical issues, and providing technical support. You will also be responsible for ensuring that all systems are running smoothly and efficiently, as well as staying up to date with the latest advancements in ground and cloud-based technology. Your role is crucial in maintaining the operation of space systems, and your innovative ideas and problem-solving skills will be highly valued. Are you ready to take on this out-of-this-world challenge? Join us at GNI and be a part of shaping the future of the Space Systems Command Innovation and Prototyping Acquisition Delta. Primary Activities Work with cross functional teams (networking, systems admins, cyber, hardware, etc.) to develop, integrate, maintain, sustain, and retire legacy satellite ground systems supporting Space Systems Command Create Engineering Review Board (ERB) and Change Control Board (CCB) presentations to document requirements, present the technical solution, propose the implementation strategy, and propose the test strategy Create and maintain system documents such as the Interface Control Document, System Interface Document, network topologies, and data flow diagrams Integrate and test supporting space ground systems hardware and software from various vendors; work with networking teams to configure and test interfaces; work with systems administration teams to test mission software Draft and maintain supporting plans and procedures such as the system test plan, system implementation plan and system test procedures Develop and maintain the implementation and test schedules with the customer Advise the customer on test strategies for ground system integration and test; work with Satellite Control Network test centers as part of system integration and test Integrate and test mobile ground systems supporting SV Factory Compatibility Test (FCT) Work with cyberspace engineers to develop, integrate, and maintain a secure network Collaborate with project engineering lead, systems engineers and other technical staff to identify, assess, and present options for meeting functional and technical requirements of satellite ground systems, which may include hardware and/or software Ensure compliance with approved system engineering methods and quality standards, reviewing existing processes and developing solutions to increase productivity Support tasks to design, analyze, install, manage, and configure advanced LAN and network systems, supporting mission essential systems Maintain cognizance over technical activities and schedule milestones within program Integrated Product Teams (IPTs) Participate in technical interchange meetings and reviews Bachelor's degree in an engineering field and 9 years of technical experience or 4 additional years of experience may be used in lieu of degree Active Top Secret or DoE Q clearance with SCI eligibility (must be eligible for SCI indoctrination within first 3 months of start date) and be able to obtain and maintain TS/SCI Minimum 3 years' direct experience in space systems, space command and control, or equivalent relevant disciplines including industry (development Contractor), DoD or other Agency (NRO, NSA, NASA, etc.) background Able to build and maintain relationships and partnerships with stakeholders at all levels Comfortable working in a changing and dynamic environment Proficient with MS Office Suite, including a strong ability to communicate program status; orally, written and visually Desired Project Management fundamentals with a focus on building schedules Familiar with ISO/IEC/IEEE 15288 and the DoD Systems Engineering Guidebook Familiar with IT Cloud Fundamentals Familiar with collaboration tools such as Jira and Confluence Familiar with supporting components such as firewalls, cryptographic hardware, databases, routing and network-based protocols, and virtualization technologies CompTIA Security + or equivalent certification required for DoD 8570 Information Assurance Technical (IAT) Level 2 compliance and able to obtain environment certification within 6 months of start Demonstrated experience exhibiting strong attention to detail and organizational skills Demonstrated experience exhibiting strong customer service attitude and focus

Kairos Power is a new nuclear energy technology and engineering company whose mission is to enable the world's transition to clean energy, with the ultimate goal to dramatically improve people's quality of life while protecting the environment. This goal will be accomplished through the commercialization of the fluoride-salt-cooled, high-temperature reactor (FHR) that can be deployed with robust safety, affordable costs, and flexible operation to accommodate the expansion of variable renewables. Job Summary Kairos Power is seeking a highly motivated Senior Electron Beam Welding Engineer that will be responsible for in-house electron beam welding (EBW) capability development and technology maturation. In this role, you will work on the Welding Development team to assist in the advancement and implementation of welding and manufacturing capabilities. The candidate will partner with design, testing, materials, modeling & simulation, and reliability engineers to develop weld joint design, weld techniques, weld specifications, and inspection methods needed for welded KP-FHR and test platform assemblies. Responsibilities Procedure Development & Qualification Design, develop, and maintain EBW procedures and supporting documentation (WPS/PQR) to meet material, joint, and quality requirements in compliance with applicable codes, standards (e.g., AWS, ASME, API), and regulatory expectations. Develop and execute weld qualification plans, including test coupons and validation trials, in coordination with quality and materials teams Anticipate future welding needs by aligning EBW procedures and qualification strategies with evolving product designs, manufacturing processes, and regulatory demands. Quality Assurance & Process Optimization Oversee and review EBW inspections to verify compliance with design specifications and applicable quality standards. Analyze weld test data to identify trends, determine root causes of defects, and implement corrective actions to enhance welding performance and reliability. Lead continuous improvement initiatives to optimize EBW processes, increase efficiency, reduce cost, and maintain high-quality output. Collaboration & Training Partner with design engineers, production teams, and key stakeholders to integrate EBW processes into the manufacturing workflow effectively. Provide hands-on training and mentorship to welding technicians and operators on EBW techniques, safety protocols, and industry best practices. Technical Documentation & Reporting Develop and maintain comprehensive technical documentation, including process instructions, work procedures, and detailed reports. Ensure accurate recordkeeping of EBW procedures, inspection results, and quality control data to support traceability and continuous improvement. Equipment Ownership & Maintenance Ensure performance, reliability, and availability of EBW systems, including high-vacuum chambers, beam control units, and power supplies. Monitor and calibrate critical parameters (e.g., beam alignment, focus, power output, vacuum integrity) to maintain process consistency and compliance with specifications. Lead maintenance and upgrade initiatives, including preventive planning, troubleshooting, vendor coordination, and system improvements to enhance automation and long-term equipment reliability. Other Duties as Assigned Qualifications Bachelor's degree or higher in Welding Engineering, Materials Science, Mechanical Engineering, or a related technical field Minimum 5 years of welding engineering experience, with substantial hands-on experience in EBW required Experience with weld inspection methods, including both destructive testing and non-destructive examination (NDE) techniques Hands-on experience working with austenitic stainless steels, carbon steels, piping systems, and pressure vessels Experience leading cross-functional projects or mentoring junior engineers and technicians is preferred. Experience with manual and CNC machining operations is preferred Knowledge, Skills & Abilities Strong knowledge of EBW processes, high-vacuum systems, and high-voltage equipment operation Proficient in reading and interpreting complex engineering and assembly drawings, including weld symbols and geometric dimensioning & tolerancing (GD&T) Familiarity with ASME Boiler and Pressure Vessel Code and AWS structural welding standards Skilled in using CAD software such as SolidWorks for part modeling and drawing generation Proficient with computers and digital tools used in technical documentation, data analysis, and process development Familiarity with the calibration, preventive maintenance, and troubleshooting of EBW systems and associated instrumentation. Strong problem-solving skills and ability to drive continuous improvement through data-driven analysis and collaboration Proven ability to manage multiple priorities in a fast-paced, agile manufacturing or development environment Excellent verbal and written communication skills; able to collaborate effectively across engineering, production, and quality teams Ability to collect, manage, and transfer technical knowledge across teams or documentation systems Committed to fostering a safe, inclusive, and high-performing workplace Ability to work with highly collaborative team. Ability to solve problems quickly and efficiently. Prioritizes and ensures safety of oneself and others. Ability to seek different and novel ways to create efficiencies when working on problems, challenges and issues. Physical Demands Ascending or descending ladders, stairs, scaffolding, ramps, scissor lifts, articulated boom lifts and the like Setting up and transferring temporary structures (e.g. scaffolding, ladders) Moving self in different positions to accomplish tasks in various environments including tight and confined spaces Remaining in a stationary position, often standing, or sitting for prolonged periods Moving about to accomplish tasks or moving from one worksite to another Adjusting, moving, transporting, installing, positioning, or removing objects up to 50 pounds in all directions Communicating with others to exchange information Operating motor vehicles, heavy equipment or machinery Use hand tools Repetitive assembly operations of manufacturing test fixtures and test setups in collaboration with engineering and manufacturing teams Environmental Conditions Low temperatures High temperatures Outdoor environment or elements such as precipitation and wind Noisy environments Small and/or enclosed spaces Odors or fumes from chemicals or chemical reactions Elevated heights Accessing the accuracy, neatness and thoroughness of the work assigned High-concentration, demanding and fast-paced General office environment Manufacturing/Industrial Environment Safety and PPE Reading and interpreting hazardous warning signs Wearing proper PPE, to include face mask, face shields, gloves, safety shoes, etc. Reporting issues with equipment or unsafe conditions Travel Some travel may be required (up to 20%) to other Kairos Power offices or external suppliers Additional Requirements Occasionally requires overtime Occasionally requires working weekends Occasionally requires schedule flexibility Occasionally requires non-standard work-week hours Occasionally requires extended hours to support launch and critical project timelines #LI-Onsite About our Benefits We know that we have some of the most talented and dedicated employees, and we believe in rewarding them accordingly. If you work here, full-time employees (excludes interns) expect to have access to the benefits below: Competitive compensation packages Medical, dental and vision benefits for employees and their dependents Paid Vacation 401(k) and pre-tax health insurance, dependent care, and commuter benefits (FSA) Kairos Power is committed to building a diverse workforce that reflects the communities where we do business. Kairos Power is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. We actively welcome people of different experiences, abilities, and perspectives. Kairos Power participates in E-Verify. Candidates only, no recruiters or agencies please. Note: You are applying for a position that is located in a facility that handles information that is subject to export control restrictions by the Department of Energy under 10 CFR Part 810. To work in this facility, you need to be authorized by the Department of Energy to access Part 810-controlled information. Foreign nationals who are citizens of countries that are not on the Department of Energy's general authorization list (link below) are not permitted to work in our facility unless the Department of Energy issues an export control license to the company to permit that individual to have access to Part 810-controlled information. The following questions are intended to determine the licensing requirements that may apply. **************************************************************

We are seeking an experienced Senior Staff Aerospace Engineer SME to support the Air Force Research Laboratory (AFRL) / Integrated Experiments and Evaluation Division (RVE) in cradle-to-grave mission support. Responsibilities include: Flight Experiment Mission and Operations Planning: Develop procedures for all mission phases Create Concepts of Operations (CONOPS) Develop Launch and Early Operations (LEOps) plans Conduct operational testing using simulators, virtual simulations, and flatsats Perform ground system testing, including operations acceptance, factory compatibility, and launch-base compatibility tests Support planning for mission operations centers, including facility layout and preparation Participate in day-in-the-life events, exercises, rehearsals, and mission dress rehearsals in roles such as operator, systems expert, or mission planner Flight Operations Support: Conduct on-orbit spacecraft operations and experimentation, including on-call support Support operations acceptance testing, including regression testing of new components/processes Develop vehicle fault detection and reporting systems Provide anomaly resolution and reporting support Qualifications Required: 15+ years of experience in aerospace engineering; recognized as a defense industry Subject Matter Expert (SME) Bachelors degree in Aerospace Engineering, Systems Engineering, Mechanical Engineering, or a related field Proven experience in integrating flight experiments including system design, test planning, execution, and post-flight analysis Strong understanding of aerospace systems, flight test operations, hardware/software integration, telemetry, and mission-critical systems Demonstrated experience in anomaly investigation and resolution, root cause analysis, and corrective action Familiarity with aerospace and defense industry standards and best practices for flight testing and system integration Expertise in systems engineering principles, including requirements definition, validation, and verification Active DoD Top Secret security clearance with SCI eligibility (U.S. Citizenship required) Qualifications Desired: Masters degree in Aerospace Engineering, Systems Engineering, Mechanical Engineering, or a related field Working Place: Albuquerque, New Mexico, United States Company : 2025 Aug 28th ENSCO