Staff engineer jobs in Citrus Heights, CA - 644 jobs

SALARY: $80,000-$150,000+ (depending on experience) The Mechanical & Plumbing Engineer provides technical leadership, design services, and engineering coordination in support of estimating, preconstruction, project management, detailing, fabrication, and field operations. This role is responsible for developing cost-effective, code-compliant, energy-efficient, and constructible mechanical and plumbing systems that align with company standards, protect project scope and budget, and support successful project execution across all delivery methods, with a strong emphasis on design-build work . REQUIREMENTS: Professional Engineer (PE) license in Mechanical Engineering. 5+ years of experience in mechanical engineering design. Proven ability to design projects independently and manage multiple assignments. Strong background in plumbing and mechanical systems. Experience with design-build projects, ranging from unit change-outs to full ground-up builds. Ability to work on large TI (Tenant Improvement) projects and new building construction. DUTIES & RESPONSIBILITIES 1. Design cost-effective, energy-efficient mechanical and plumbing systems that meet client requirements, budget constraints, and company standards. 2. Provide complete, code-compliant system layouts, drawings, specifications, and engineering narratives for all project delivery methods. 3. Perform system calculations including loads, sizing, pressure drops, and energy analysis. 4. Maintain current knowledge of applicable mechanical, plumbing, energy, and building codes, including AHJ requirements. 5. Participate in energy evaluations, payback analyses, and sustainability initiatives (including LEED support where applicable). 6. Support estimating with design-build concepts, system layouts, technical clarifications, and engineering narratives. 7. Review plans and specifications for scope completeness, constructability, risks, and opportunities. 8. Review and validate proposed substitutions and “equals” prior to bid submission and document approved alternatives. 9. Assist estimating and project management with obtaining complete, compliant mechanical equipment quotes, including coordination with manufacturers' representatives. 10. Maintain a clear understanding of project scope, estimated cost, design budget, risks, and optimization opportunities. 11. Collaborate with detailing, fabrication, and field teams to ensure constructability and early system optimization. 12. Participate in project kickoff meetings, coordination meetings, and strategic planning sessions. 13. Provide technical support to project management and detailing teams on both design-build and plan/spec projects, including drawing interpretation and RFI production and review. 14. Participate in and oversee system optimization efforts throughout construction. 15. Support PlanGrid (or equivalent platform) population and maintenance in accordance with company procedures. 16. Prepare permit-ready, budget-compliant design drawings and documentation for design-build and special projects. 17. Coordinate with AHJs to obtain permits and resolve permitting issues, including in-person permit acquisition when required. 18. Support inspections and address code or compliance comments as necessary. 19. Develop and maintain professional working relationships with clients, vendors, suppliers, subcontractors, unions, and AHJs. 20. Manage external engineering and detailing resources when outsourced, including defining scope, schedule, and deliverables in coordination with project management. 21. Support equipment procurement and technical coordination throughout the project lifecycle. 22. Maintain and update company mechanical, plumbing, and engineering standards and specifications. 23. Participate in the annual refresh of company construction and design standards. 24. Apply lessons learned from completed projects to improve future designs and processes. 25. Collaborate across departments to continuously improve design quality, constructability, and efficiency. 26. Maintain professional conduct and effective communication with all internal and external stakeholders. 27. Report to work on time and maintain an excellent attendance record. 28. Execute all duties and responsibilities in a professional manner. 29. Comply with all company policies, procedures, and the Employee Handbook. 30. Perform other duties as assigned by Engineering Leadership, Preconstruction, or Executive Management.

KGS Group is seeking a Mechanical Engineer to join our growing practice in Bellevue, Washington or Granite Bay, CA. About Us We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We're different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right. As an employee-owned company, we're invested in our work and our people. Working with us means you'll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you'll have countless opportunities to learn and grow. Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast, we are looking for strong candidates at all levels to join our team! The Role As a Mechanical Engineer, you will be responsible for providing engineering inputs integral to both small and large-scale hydro and dam projects. You will lead technical teams and mentor junior staff, support production, and coordinate delivery of engineering work products with multi-disciplinary project team members and external stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our hydropower capabilities and working with key staff in growing the business. You'll also be involved in supporting project management duties, coordinating with internal and external clients as well as assisting with guiding and mentoring other engineers within the team. In this role you will lead teams conducting technical work involving turbines, generators, and their associated ancillary systems, as well as other balance of plant systems such as gates, hoists, cranes, pumping systems, lubrication systems, and other critical equipment at hydroelectric powerplants. You will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out site visits and inspections. You will be working in a collaborative environment with a great team of engineers, technicians, scientists, and other industry-leading peers, and you will also interface directly with clients. Key Responsibilities: Design modifications to, or entirely new, mechanical systems related to dams, control structures, water retaining structures, and hydroelectric generating stations. Execute multiple projects from the proposal stage through to completion. Projects will include a variety of small to large projects involving water resources, flood control, and hydroelectric sectors. Conduct site investigations, condition assessments, and provide design and construction support. Mechanical engineering design and refurbishment of cranes, hoists, hydroelectric turbines, generators, and other balance of plant systems. Conduct feasibility studies for proposed designs and assess costs and benefits for alternatives in a systematic and thorough manner. Preparation and review of reports. Work collaboratively with other disciplines to execute project deliverables, as well as ensure that quality objectives, schedules, and budgets are met. Edit and prepare design specifications. Contribute to the development of the hydro-mechanical practice at KGS by assisting the US mechanical design lead by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks. Perform other duties as assigned. About You To fill the role, we're looking for an applicant to bring forward a good mix of qualifications and previous experiences. Some highlights should include: Minimum of a Bachelor of Science (BS) in Mechanical Engineering from an ABET accredited university. A post-graduate degree would be an asset. Minimum of 7-15 years of experience in mechanical engineering. Must be registered as a Professional Engineer (P.E.) in Washington, Oregon, or California, as well as eligible for registration as a professional engineer in other states by comity through NCEES; or, if not already registered as a PE, would be able to obtain licensure within 1 year from date of hire. Previous consulting experience is preferred, but not required. Excellent verbal and written communication skills are required. Must be self-motivated, and able to work independently with minimal supervision and manage several projects simultaneously. Travel to project sites is usually limited but will be required at times depending on project/client requirements. The amount of travel time desired by our employees can usually be accommodated. Must possess a valid driver's license and the ability/willingness to undergo security clearance checks. Client interaction: must be able to effectively assume a lead role as project engineer at project meetings and communicate project and technical information. Demonstrated experience in site investigations, condition assessments, design, and construction support are preferred. The salary range for this position is $110,000-$160,000 Please note that the salary range mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate's experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization. KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package. KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process. *Please help us learn more about you, your professional goals, and why this job is a good fit for you by submitting a cover letter along with your resume. We highly encourage all applicants to provide a cover letter.*

Job Responsibilities: The Project Engineer at FLINT supports the Project Manager and Project Superintendent to facilitate a well-managed project. The Project Engineer assists with the overall management and administration of projects including pre-construction services, estimating, subcontractor management, RFIs, submittal process, CORs, and SCOs. Responsibilities include: Drafting and reviewing subcontracts and purchase orders Thoroughly reviewing project documents and familiarizing with project participants Representing the company in project meetings Determining submittal requirements and maintaining the submittal log Assisting in developing and maintaining project schedules Conducting regular site visits to ensure proper construction and adherence to schedule Administering As-Built drawings Handling project correspondence and documentation Obtaining necessary permits and ensuring timely receipt of record documents Assisting in administering the Punch List Performing additional duties as assigned Job Requirements, Qualifications, Characteristics: FLINT is seeking an experienced Project Engineer with 1+ years of experience to perform project management functions on small projects ( Good grasp of construction terminology and activities Understanding of all trades including MEP and building permit process Ability to estimate CORs, assist in bidding, and assemble project estimates Familiarity with cost control and management processes Basic understanding of prime contract types and delivery methods Proficiency in project documentation, scheduling, safety practices, and technology tools (Fieldview, Viewpoint, Team VPT1, Bluebeam, Pype, GCPay, P6, and Vista) Skills in business development and maintaining customer relations Understanding of fee enhancement, risk mitigation, and client management Ability to mentor team members and promote teamwork and cooperation

Kratos Defense & Security Solutions, Inc., is a leading defense technology company focused on unmanned systems, satellite communications, cyber security/warfare, microwave electronics, missile defense, training, and combat systems. Our customers include the U.S. federal government, foreign governments, commercial enterprises, and state and local government agencies. At Kratos, we prioritize affordability as a cornerstone of our technology. We leverage proven, cutting-edge methodologies and technology to minimize costs, streamline schedules, and mitigate risks, ensuring timely delivery of cost-effective solutions to market. Kratos Unmanned Aerial Systems (KUAS), a division of Kratos Defense, is renowned for its expertise in developing, delivering, integrating, and supporting high-performance, cost-effective, jet-powered Unmanned Aerial Systems (Targets and Tactical). As a mid-tier defense contractor, we've demonstrated agility and innovation in providing aircraft to the US military and global allies and partners. Our track record of delivering top-notch jet-powered subscale targets has established us as a go-to defense contractor capable of delivering capabilities at an affordable price. At KUAS, we prioritize innovation, collaboration, and growth. Our team collaborates to cultivate a supportive and dynamic workplace, fostering creativity and promoting professional development while honoring personal and family lives. Join our team and help shape the future of unmanned technology within the defense industry today! GENERAL JOB SUMMARY: Develops, implements, and improves manufacturing and industrial processes to effect maximum product throughput and optimum resource efficiency. Coordinates engineering changes to existing product lines and manages new product introductions. Sets work standards, work-flows, and defines resource requirements for assigned programs. Is expected to apply and champion 'Lean Manufacturing' methodologies in all areas of the manufacturing cycle. Works closely with other engineers and other functional departments to ensure schedule, systems, and part/process data integrity. ESSENTIAL JOB FUNCTIONS: Manufacturing Engineer ALL The duties and responsibilities listed below apply to all levels of Manufacturing Engineers. Each level of Manufacturing Engineer has additional duties and responsibilities listed. Works with customer released or KUAS released drawings and/or CAD models, engineering BOMs, and other engineering specifications to develop, implement and improve manufacturing processes. Creates or participates in engineering and manufacturing reviews and communicates effectively as a technical contributor. Implements and executes producibility concepts and understands DfX of products and processes. Collaborates well with internal and external resources to resolve technical issues. Develops and documents the manufacturing process in detail with an emphasis on visual media, ease of training, and standardized format. Responsible for disposition of discrepant or non-conforming product. Has familiarity with CAD tools, manufacturing execution systems, ERP, and other commonly used software. Designs, coordinates and validates workstation layouts with an emphasis on ergonomics, single piece or small batch flow, visual aids, Poke Yoke (mistake proofing), 5S, and zero-defect policies. Calculates and communicates shop floor staffing based on production requirements. Provides OTJ training or mentoring and may provide certification for processes to production associates. Works with materials management to develop and implement effective inventory methodologies. Reviews and designs in-process handling equipment for the safe and expeditious transportation of parts, inventory, and/or tooling. Identifies tooling requirements and coordinates the manufacturing of tools/fixture. May identify issues with production personnel and recommend mitigation actions. Responsible to generate, review, and maintain cost, schedule, and technical performance operational targets and standards. Other duties may be assigned. Manufacturing Engineer I Works on projects of basic complexity that effect program outcomes. Implements Manufacturing and/or Engineering Change Orders. Reviews and updates manufacturing work instructions. Collaborates with Quality Engineering to determine inspection criteria and methods. Manufacturing Engineer II Works on projects of medium complexity which impact aspects of programs. Works with IPT and Program managers to ensure schedule and contractual integrity. May coordinate the work of other engineers and production specialists. Reviews and approves Engineering Design changes. Coordinates tool maintenance, repair, and inspection. Implements new product design into the manufacturing system. Constantly reviews equipment, technology, processes, and manufacturing methods to identify opportunities for improvements. Manufacturing Engineer III Works on projects of advanced complexity that have significant program impact. Works with IPT and Program managers to ensure schedule and contractual integrity. Establish & maintain material, process, and workmanship specifications. Develop and implement tooling for all phases of production. A subject matter expert for manufacturability of product, process, and tooling. May mentor junior level manufacturing engineers. Manufacturing Engineer IV Independently works on projects of advanced complexity that have major organizational impact. Maintain reliable and safe manufacturing systems while improving production rates, efficiencies, yields, costs, and changeovers. Responsible for material evaluation, testing, and implementation for production operations. Includes assisting Engineering and Supply Chain with material obsolescence and or selection. Evaluate and improve on processes in manufacturing systems. Research and purchase new manufacturing technology. Advise on corrective actions. Responsible to establish & maintain material, process, and workmanship specifications. Will mentor lower-level manufacturing engineers and act as a liaison to other functional organizations. Manufacturing Engineer V Advise manufacturing engineers in a leadership style role within a manufacturing environment. Responsible to demonstrate expert level knowledge of manufacturing processes, methodologies, and best practices. Provide mentorship in lean manufacturing principles and continuous improvement methodologies (e.g., Kaizen, 5S, value stream mapping). Perform project management tasks, including planning, budgeting, resource allocation, and timeline management. Engage in professional development activities, such as attending conferences, workshops, and training sessions. Provide oversight to small teams of manufacturing engineers. Provide problem-solving and analytical skills to identify and resolve manufacturing issues. Communicate effectively, both verbal and written, to collaborate with stakeholders at various levels, including executives, engineers, technicians, and operators. Stay up-to-date with industry trends, emerging technologies, and manufacturing advancements to management. SUPERVISORY RESPONSIBILITY: None COMPENSATION: $75,000 - $150,000 Annually #LI-Onsite EDUCATION AND EXPERIENCE: Required: Each successive level of Manufacturing Engineer builds on the identified typical qualifications listed for the previous level(s) Manufacturing Engineer. Manufacturing Engineer I Requires BS degree in a technical field, (Manufacturing Engineer preferred). A minimum of 1-2 years of progressive/technical experience. May be required to obtain and maintain a U.S. security clearance at the appropriate level (requires U.S. Citizenship). Manufacturing Engineer II Requires BS degree in a technical field (Manufacturing Engineering preferred). A minimum of 2-5 years of progressive/technical experience. May be required to obtain and maintain a U.S. security clearance at the appropriate level (requires U.S. Citizenship). Manufacturing Engineer III Requires BS degree in a technical field (Manufacturing Engineering preferred). A minimum of 5-7 years progressive/technical experience. May be required to obtain and maintain a U.S. security clearance at the appropriate level (requires U.S. Citizenship). Manufacturing Engineer IV Requires BS degree in a technical field (Manufacturing Engineering preferred). A minimum of 7-10 years progressive/technical experience. Material and/or Process Engineering experience. May be required to obtain and maintain a U.S. security clearance at the appropriate level (requires U.S. Citizenship). Manufacturing Engineer V Requires BS degree in a technical field (Manufacturing Engineering preferred). A minimum of 10 years progressive/technical experience. Material and/or Process Engineering experience. Mentorship experience. May be required to obtain and maintain a U.S. security clearance at the appropriate level (requires U.S. Citizenship). Preferred: Experience with composite manufacturing, i.e. lamination, machining, and bonding. Experience in lean manufacturing methods. CATIA v5. WORK ENVIRONMENT/PHYSICAL REQUIREMENTS: Standing on a hard surface, walking. Some lifting (not over 50 lbs.). Office and manufacturing environment. May work extended hours or weekends. Employee may generate, handle, manage, or work around hazardous materials and hazardous wastes. May be required to lift up to 50 pounds in accordance with KUAS General Safety Training guidelines. TRAVEL REQUIREMENTS: 0-25% May be required between other KUAS locations.

*About us* Dokken Engineering is a small business in CONSTRUCTION\_ENGINEERING in Folsom, CA. We are professional, agile and our goal is to WE ARE DOKKEN est. 1986 We are civil and structural engineers, environmental planners, right of way agents. We are hydraulics specialists, community outreach experts, biologists, archaeologists, traffic and electrical engineers. We are design and delivery gurus. SENIOR ENGINEER (Water Resources) NOTE: Job duties and responsibilities are subject to change at any time and may include other tasks, as assigned. At Dokken Engineering, we're looking for the best and brightest to join our Water Resources team. Dokken Engineering delivers innovative engineering solutions for local, state, and federally funded projects throughout the state of California. Come join us to develop and implement innovative water resources strategies and solutions -- on projects in the community you live in, regionally, and throughout California. We are seeking a Senior Engineer/Water Resources for our Folsom HQ office. You will be providing a variety of professional civil engineering and hydraulics tasks. You will be performing engineering work and exercising independent judgment. Essential Functions: •Lead preparation of engineering analyses for potable water, sewer, recycled water, drainage,flood control, and agricultural irrigation systems •Lead the analysis and preparation of erosion control mitigation •Lead in the preparation of construction stormwater documents •Prepare and check quantity calculations •Oversee associate and assistant staff work on projects •Lead projects associated with water resources design and analyses Other Duties & Responsibilities: •Coordination with internal/external disciplines, utility companies, subconsultants and clients •Attend meetings, prepare meeting minutes, and address action items •Perform quality control for reports/projects •Lead marketing efforts occasionally Minimum Requirements: •Bachelor of Science in Civil Engineering or related field •California Professional Civil Engineer license •Minimum of 7 years of progressive water resources experience •CA driver's license Other Desired Knowledge, Skills & Abilities: •Strong working knowledge of hydraulic design software such as HEC-RAS, StormCAD, Innovyzesoftware, PondPack, CulvertMaster, WSPG, ArcGIS, and other similar programs •Strong understanding of basic and more complex water resources principles •Stormwater Practitioner/Designer (QSP/D) certification a plus •Effective interpersonal, verbal and written communication skills •Strong technical writing and analytical skills •Ability to work independently and as part of a team SENIOR ENGINEER (Water Resources) •Experience with roadway design and CAD software such as Microstation, In-Roads, or AutoCAD •Masters Degree in Civil Engineering or related field Physical Requirements: •Will sit, stand or walk for the entire duration of a workday •Will use telephone, computer system, email, or other electronic devices on a regular basis •Close vision, distance vision, peripheral vision, depth perception and ability to adjust focus •Work mostly indoors. Occasionally work outdoors in remote or urban environments •Usually work near others, such as in a shared office space •Occasionally wear protective gear, such as a hard hat •Sometimes work in noisy or distracting work environments •Occasionally travel to a project site by automobile and/or airplane •Occasionally work from a vehicle while at project sites FLSA Status: Full-Time Exempt Compensation: Competitive salary ranging from $120,000+ commensurate with qualifications and experience Benefits: •Comprehensive health plan including medical, dental and vision coverages •401(k) Profit Sharing Plan with generous employer match •Participation in Employee Stock Ownership Plan •Life, accidental death and long-term disability insurance Location: Schedule: Folsom HQ Office; In-Person or San Diego OffceFull-time; Monday to Friday, 8:00 a.m. to 5:00 p.m. Introductory/Probationary Period: At-Will Employment Equal Opportunity Employer Statement: It is the policy of this Company to assure that applicants are employed, and that employees are treated during employment, without regard to their race, religion, sex, color, national origin, age, or disability. Such action shall include employment, promotion, demotion, or transfer; recruitment or recruitment advertising; layoff or termination; rates of pay or other forms of compensation; and selection for training. Job Type: Full-time Pay: From $120,000.00 per year Benefits: * 401(k) * 401(k) matching * Dental insurance * Flexible spending account * Health insurance * Life insurance * Paid time off * Retirement plan * Vision insurance Experience: * Civil Engineering: 8 years (Preferred) License/Certification: * PE (Required) Work Location: In person

Before applying for this job, please read description in its entirety and if you are qualified and interested, follow the directions below on how to apply. This position is located in Roseville, CA. No relocation package is provided for non-local candidates. Harris & Bruno International is looking for a Manufacturing Engineer to work in a high pace manufacturing environment. This individual will be expected to: Carry out process improvement, problem resolution, project management and employee training. Improve manufacturing processes and methods for cost reduction, quality improvement and efficiency. Prepare and present plans and coordinate deployment including training of team. Designs, develops, and tests and/or sources and cost-justify various tools, machinery and equipment for recommended manufacturing methods. Assist in improving production control, standard operating procedures, safety, quality control and training. Perform research, design, and development of manufacturing processes including production flow, assembly methods and production equipment. Prepare and maintain detailed layouts of building and equipment. Coordinate the manufacturing launch of new/revised products including establishing goals, training team members and evaluating results. Perform product/process analysis for cost reduction, quality improvement, and improved efficiency. Represent manufacturing on cross functional teams. Maintain product and company reputation by complying with government regulations. Benefits Package Includes: Medical Dental Voluntary Vision Company provided life insurance with the option of additional voluntary life insurance. 401k with employer match. Robust PTO policy beginning with 3 weeks earned the first year. Paid holidays. Knowledge/Skills: Technical Capacity. Proficient at problem solving and analysis. Leadership. Communication proficiency. Education/Experience: Bachelor degree in Engineering required. 3 or more years' experience as a Manufacturing Engineer. Experience with 3-D Modeling Harris & Bruno International is a stable company that has been in business since 1948. We are experiencing regular, steady growth in our core and developing product lines. We enjoy a strong presence in the rapidly expanding commercial printing market supporting customers who package products that you use every day.

Project Engineer (Construction - Concrete Subcontractor) Job Type: Full-time Pay Range (Annualized): $60,000 - $90,000 per year. About the Role We are a concrete subcontractor seeking a Project Engineer to support our Project Management team based in our Rancho Cordova office. This role helps keep projects organized, documented, and moving-supporting communication, implementing document controls, evaluating change order requests and submittals of shop drawings, reviewing project schedules, etc. This position is ideal for someone looking to build or continue a career in construction management. What You'll Do Develop a full understanding of the scope and interdependence of all contract documents. Handle and submit Daily job reports, RFI's, and submittals. Manage effective document control mechanisms for the project to ensure that work is performed in accordance with contract documents. Evaluate change order requests including design changes, specifications and drawing releases and reports status. Evaluate submittals of shop drawings, material data and samples and take appropriate action based upon contract specifications. Review the project schedule and assist the project manager in the maintenance of it as requested. Assist the project manager in the maintenance of effective cost control mechanisms for the project. Complete project close out requirements in accordance with contract documents. Administer quality control program as outlined in the project procedures manual. Become familiar with safety requirements of the project and monitors compliance. Utilize safe work practices and follow directives, policies, and procedures for assisting and maintaining a healthy and safe work environment. Execute additional duties and responsibilities as assigned. What We're Looking For Ability to prioritize multiple tasks and adapt to changing requirements and priorities. A self-motivated and proactive team player. An organized and detail oriented individual. An skilled communicator who can interact effectively and professionally with all levels of employees, management, vendors, clients, and others. A dedicated team member who is comfortable with traveling, working on active jobsites, and who can work extended hours when required by project schedules or urgent circumstances. Qualifications 1-3 years construction experience. Ability to use a computer. Proficient with Microsoft 365 (Outlook, Word, Excel, etc.) and Bluebeam (or equivalent). Proficiency with PlanGrid or Procore are a plus. High School Diploma/GED required; Construction Management degree preferred Work Environment & Schedule The position reports on-site to an office located in Rancho Cordova, CA. The position requires travel to active construction jobsites as needed or required. Typical office hours are Monday - Friday, 8:00 - 5:00. The working schedule may vary by project needs. The company has an engaging culture and periodically attends or hosts events, on and off site. Benefits Medical, Dental, Vision, and Life Insurance. Employee Assistance Program. Profit Sharing & 401(K) Program. Discretionary Bonus Program. Paid Sick Leave (5 days per year) Paid Vacation Leave (starts at 2 weeks/year) Paid Holidays (9 days per year) Paid Volunteer Day Paid Bereavement Leave Equal Opportunity We are an Equal Opportunity Employer and consider applicants without regard to race, color, religion, sex, gender identity/expression, sexual orientation, national origin, age, disability, veteran status, or any other protected status. Reasonable accommodations are available for qualified individuals with disabilities.

Principal Geotechnical Manager - Sacramento, California Sequence has been exclusively retained and is currently seeking a capable Principal Geotechnical Manager to lead the geotechnical division of a respected, privately held consulting organization in Northern California. This is among the most visible leadership opportunities of its kind in the region - a unique chance to step into executive oversight for a well-established, 25-year-old firm with no debt, significant resources, and a strategic plan to expand operations across multiple states and regions. Based in Sacramento, California, with regional operations across Northern California, the Principal Geotechnical Manager will be responsible for directing the performance, growth, and long-term vision of the geotechnical team. This includes oversight of technical excellence in foundation systems, slope stability, seismic evaluation, levee and dam safety, subsurface investigations, and related disciplines, while simultaneously leading a talented group of engineers and geologists in pursuit of continued innovation and quality service delivery. The ideal individual will be both a business leader and technical authority-equally capable of mentoring staff, guiding client engagements, and shaping the operational and financial performance of the division. This role requires a proven ability to function simultaneously as a technical leader, project director, and client-facing seller-doer. While the firm maintains dedicated marketing and business development resources, this position is highly visible to clients and represents a key leadership presence in building relationships, driving project opportunities, and ensuring overall customer satisfaction. The organization operates with the stability and capital of a large platform, yet with the nimbleness and close-knit culture of a family-owned consultancy. Leadership values collaboration, integrity, and a sense of balance-recognizing the importance of work-life integration while ensuring the delivery of critical infrastructure that protects California's communities. Most projects are located within California and Nevada, allowing stability, minimal travel, and the ability to build a long-term career and life in one place. Corporate Culture The client is a privately held, family-owned firm with over 25 years of history serving California's communities. Leadership is deeply committed to fostering an environment where collaboration, respect, and integrity are not just aspirations but everyday practice. With no debt and strong capitalization, the organization operates from a position of stability that allows it to prioritize people over bureaucracy. Decisions move quickly, ideas are valued at every level, and leaders are visible and accessible. The culture emphasizes balance-recognizing that professional success is inseparable from personal well-being. Staff are supported with flexibility, minimal travel requirements, and meaningful professional development opportunities. Many team members have spent decades with the firm, a testament to its emphasis on loyalty, mentorship, and building a true sense of belonging. This is an environment where talented professionals can build not just a career, but a legacy. Responsibilities Lead, manage, and grow the geotechnical team while driving revenue and client satisfaction. Provide leadership as both technical authority and project director, ensuring quality, efficiency, and profitability across all projects. Function as a seller-doer: maintain and strengthen client relationships, identify and pursue opportunities, and represent the firm as a trusted partner. Oversee technical programs including subsurface investigations, foundation design, seismic and slope stability evaluations, levee/dam studies, and forensic investigations. Mentor engineers and geologists, fostering a collaborative, inclusive, and high-performance team culture. Guide client engagement strategies, prepare estimates and schedules, and provide oversight throughout project execution. Serve as the senior technical and client-facing leader representing the firm with agencies, partners, and stakeholders. Qualifications California Geotechnical Engineer (GE) strongly preferred; California PE required (with GE obtained within 12 months if not currently held). 8-10+ years of progressively responsible geotechnical engineering experience, including senior management. Expertise in foundation systems, seismic analysis, dam and levee safety, slope stability, and complex infrastructure challenges. Demonstrated ability to lead teams, manage KPIs, and cultivate strong client relationships. Experience functioning as a seller-doer, combining technical excellence with client development and relationship management. Bachelor's degree in Engineering required; Master's in Geotechnical Engineering preferred. Candidate Profile This opportunity could be ideal for a seasoned senior professional seeking a long-term home within a stable, well-capitalized, and growing organization-one where their knowledge and abilities will be valued, recognized, and rewarded. At the same time, it may also be an excellent fit for a talented and dynamic mid-level leader who is poised to step into principal responsibility and lead the geotechnical group with the full backing and resources of an established firm. Compensation & Benefits The organization offers a highly competitive compensation package, including a strong base salary with performance-based bonuses, comprehensive medical/vision/dental coverage, vacation, holidays, and parental leave. An industry-leading 401(k) program with company match is provided, alongside professional development, licensing support, and tuition reimbursement. Relocation assistance can be structured for the right individual. This is an exceptional opportunity to step into leadership with a respected, well-capitalized firm that combines technical excellence with values-driven culture and long-term growth plans. For the right professional, this role represents the chance to shape not only a business unit but also the future of resilient infrastructure across California and beyond. Apply here, through our corporate website at: ************************ or submit to: Sequence Staffing 2008 Opportunity Drive, Suite 150 Roseville, CA 95678 Phone: ************ Email: ************************* “Sequence: Where a handshake still means everything.”

At General Motors, we are building on our long-standing legacy of innovation and leadership in advanced driving technologies, exemplified by our industry-leading hands-off driving system, Super Cruise . Our Autonomous Vehicles (AV) program is driven by a bold ambition to deliver expanded product portfolios that push the boundaries of safe, reliable autonomous and assisted driving experiences. Central to this mission is our Architecture and System Design team, a critical hub that operates at the intersection of requirement definition, architecture and system design, integration, and validation across the AV organization. This team ensures a cohesive and robust system architecture that enables seamless integration of our AV technologies and delivers the high standards of safety and performance our customers expect. We are seeking an experienced **Staff Systems Engineer** to lead systems engineering efforts for our embedded AV/ADAS platform. You will be responsible for defining and managing system-level requirements and architectures, optimizing resource allocation across computational and networking subsystems, and working closely with software and hardware teams to ensure seamless integration of vehicle platform components. This role is highly collaborative, strategic, and technical, influencing platform roadmaps and long-term technical direction. Key Responsibilities + Lead the end-to-end systems engineering for embedded autonomous vehicle (AV) and advanced driver-assistance systems (ADAS) platforms. + Define, document, and manage system-level requirements, ensuring traceability and alignment with product and safety goals. + Develop and maintain system architecture, balancing trade-offs in compute resources (CPU, GPU, NPU), memory (RAM), and communication bandwidth (Ethernet). + Perform system resource allocation, profiling, and optimization to meet performance, power, latency, and reliability targets. + Collaborate cross-functionally with software architecture, firmware, hardware, validation, and vehicle integration teams to ensure cohesive system design and implementation. + Drive technical roadmap planning and contribute to strategic decisions on future platform capabilities and scalability. + Identify risks and develop mitigation strategies related to system integration and performance. + Mentor junior engineers and foster a culture of technical excellence and innovation within the team. Required Qualifications + Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, Systems Engineering, or a related technical discipline. Master's or PhD preferred. + Minimum 8+ years of systems engineering experience, ideally within embedded systems, automotive, robotics, or related industries. + Proven track record of leading system architecture design and resource allocation for complex embedded platforms. + Deep understanding of AV/ADAS domain including embedded computing platforms, sensor integration, and real-time constraints. + Strong expertise in system performance analysis and optimization, including CPU/GPU/NPU architectures, memory hierarchies, and network bandwidth management. + Experience with platform systems engineering: device power management, I/O, internal & external communication + Experience with edge compute SoC and MCU architectures. + Hands-on experience with system modeling, simulation tools, and requirements management frameworks. + Experience working with Ethernet-based automotive networks (e.g., Automotive Ethernet, TSN). + Familiarity with safety standards and practices (ISO 26262, ASPICE) is a plus. + Excellent communication skills and demonstrated ability to work effectively in cross-disciplinary teams. + Proven ability to navigate and solve problems characterized by high ambiguity Preferred Qualifications + Advanced degree (MS or PhD) with a focus on embedded systems, systems engineering, or related fields. + Experience with embedded Linux or RTOS environments in automotive or robotics applications. + Knowledge of AV software stacks, middleware, and sensor data processing pipelines. + Familiarity with system-level debugging, profiling, and telemetry tools. + Prior experience at a leading AV company or tier 1 automotive supplier. + Strong leadership skills with experience mentoring engineers and leading technical projects. + Understanding of power management and thermal constraints in embedded platforms. + Experience contributing to strategic technical roadmaps and platform evolution. **Hybrid:** This role is categorized as hybrid. This means the successful candidate is expected to report to the Warren Technical Center in Warren, MI OR the Sunnyvale Technical Center in Sunnyvale, CA three times per week, at minimum. **Remote:** This role is based remotely but if you live within a 50-mile radius of [Atlanta, Austin, Detroit, Warren, Milford, Sunnyvale or Mountain View], you are expected to report to that location three times per week, at minimum. **Compensation** **:** The compensation information is a good faith estimate only. It is based on what a successful applicant might be paid in accordance with applicable state laws. The compensation may not be representative for positions located outside of New York, Colorado, California, or Washington. + The salary range for this role is $157,100 and $258,500. The actual base salary a successful candidate will be offered within this range will vary based on factors relevant to the position. + Bonus Potential: An incentivepayprogram offers payouts based on company performance, job level, and individual performance. **Benefits:** GM offers a variety of health and wellbeing benefit programs. Benefit options include medical, dental, vision, Health Savings Account, Flexible Spending Accounts, retirement savings plan, sickness and accident benefits, life insurance, paid vacation & holidays, tuition assistance programs, employee assistance program, GM vehicle discounts and more. **Company Vehicle:** Upon successful completion of a motor vehicle report review, you will be eligible to participate in a company vehicle evaluation program, through which you will be assigned a General Motors vehicle to drive and evaluate. Note: program participants are required to purchase/lease a qualifying GM vehicle every four years unless one of a limited number of exceptions applies." This role is based remotely, but if the selected candidate lives within a specific mile radius of a GM hub, they will be expected to report to the location three times a week {or other frequency dictated by your manager}. **About GM** Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. **Why Join Us** We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. **Benefits Overview** From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources (************************************************************* . **Non-Discrimination and Equal Employment Opportunities (U.S.)** General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire (********************************************* . **Accommodations** General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email (Careers.Accommodations@GM.com) us or call us at ************. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. We are leading the change to make our world better, safer and more equitable for all through our actions and how we behave. Learn more about: **Our Company (************************************************** **Our Culture** **How we hire (************************************************ Our diverse team of employees bring their collective passion for engineering, technology and design to deliver on our vision of a world with Zero Crashes, Zero Emissions and Zero Congestion. We are looking for adventure-seekers and imaginative thought leaders to help us transform mobility. Explore our global locations (******************************************** We are determined to lead change for the world through technology, ingenuity and harnessing the creativity of our diverse team. Join us to help lead the change that will make our world better, safer and more equitable for all by becoming a member of GM's Talent Community (beamery.com) (*********************************************** . As a part of our Talent Community, you will receive updates about GM, open roles, career insights and more. Please note that filling out the form below will not add you to our Talent Community automatically; you will need to use the link above. If you are seeking to apply to a specific role, we encourage you to click "Apply Now" on the job posting of interest. The policy of General Motors is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, General Motors is committed to being an Equal Employment Opportunity Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at Careers.Accommodations@GM.com .In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

If you have what it takes to become part of the Vistra family and would like to start a promising career with a global leader, take a look at the exciting employment opportunities that are currently available and apply online. This position works with occasional supervision or direction to perform assigned tasks and coordinate assigned initiatives through completion. The position will maintain effective working relationships with others Job Description Key Accountabilities: Performs assigned task with guidance from supervision Assemble and collate issue specific information to support studies Assist in organization and occasionally lead assigned projects Comply with safety policy and procedures to ensure a safe working environment Prepare and present routine reports Participate in special projects, committee assignments and routine problem - solving efforts as requested Sizing of motors, overcurrent electrical devices, relaying, and other electrical devices. Perform design changes for electrical components and systems. Ensuring compliance with all IEEE, NEIL, NRC, and NFPA code requirements are met for all Responsible for maintaining medium and low voltage systems including maintenance and trending of component level equipment. Education, Experience, and Skill Requirements: Bachelor's degree in Engineering (Electrical, Electrical Technology, or related field) from an accredited program. Minimum 2 yrs. related job experience required Relevant industry experience (4 yrs or more is preferred) ** Final pay grade will be determined based on applicant's experience and skills ** Key Metrics: Teamwork and collaboration skills within the team/department Effective written and verbal communication skills. Maintain effective working relationships within the team/department Basic understanding of power generation operations. Basic understanding of economic drivers to the business. Apply basic problem solving techniques to address routine issues Job Family Engineering Services Company Vistra Nuclear Operations Company Locations Oak Harbor, OhioOhio We are a company of people committed to: Exceeding Customer Expectations, Great People, Teamwork, Competitive Spirit and Effective Communication. If this describes you, then apply today! If you currently work for Vistra or its subsidiaries, please apply via the internal career site. It is the policy of the Company to comply with all employment laws and to afford equal employment opportunity to individuals in all aspects of employment, including in selection for job opportunities, without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, age, disability, genetic information, military service, protected veteran status, or any other consideration protected by federal, state or local laws. If you are an individual with a disability and need assistance submitting an application or would like to request an accommodation, please email us at assistance@vistraenergy.com to make a request.

Chemical Engineer About the Job Thatcher Company is seeking a Process Engineer to join our engineering team in Sacramento, California. In this role, you will provide process engineering and technical support to plant operations, capital projects, and other teams. You will work closely with operations and the business team to identify process improvement opportunities, implement plant improvement projects, and drive innovative solutions. What You Will Do Promote understanding and application of safety practices. Optimize plant production and efficiency by the implementation of improvement opportunities and management of process constraints. Work with operations and manufacturing experts to resolve technical issues. Develop and maintain process documentation and safety information such as P&IDs, material balances, equipment datasheets, process line sizing calculations, hydraulic calculations and datasheets for instruments and relief devices. Contribute to process safety and environmental performance through participation in process hazards analysis (PHA), management of changes (MOC), and incident investigation. Manage small capital projects from design through startup. Qualifications Basic Qualifications Bachelor's degree in chemical engineering with 5+ years of experience in a process facility. Travel =< 20% What Will Put You Ahead Experience in process controls, project management, or process safety management. Experience with AutoCAD LT, AFT Fathom, or SolidWorks. Experience in process industry/manufacturing. Why Thatcher is right for you Competitive salary $100-125K annualized 100% company-funded Profit-Sharing Plan (up to 25% of salary annually) 401(k) with traditional and Roth contribution options Comprehensive benefits: medical, dental, vision, life insurance, short- and long-term disability, HSA/FSA, 3+ weeks of PTO, and paid holidays Education reimbursement and ongoing professional development. The pay for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience). Applications will be accepted while this position is posted on our Careers website. Thatcher is an Equal Opportunity/Affirmative Action employer, including protected Veterans and individuals with disabilities.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** **Lead innovation in materials and processes for mission-critical technology.** Teledyne Microwave Solutions has over 50 years of experience delivering advanced microwave/RF components and integrated assemblies for aerospace, defense, and communications. Our products power applications in aviation, radar, Satcom, space, and electronic warfare. If you're passionate about materials science and process reliability, this role is for you. **What you'll do** + Identify, standardize, and qualify metals, polymers, and ceramics for new and existing products + Conduct material compatibility and performance testing under diverse conditions + Develop and refine manufacturing processes such as brazing, welding, heat treatment, plating, and surface finishing + Implement process controls and statistical methods (SPC, DOE) for repeatability and reliability + Lead root cause investigations for material or process-related failures and recommend corrective actions + Create and maintain technical documentation including process specifications and qualification reports + Ensure compliance with industry standards (ASTM, ISO, ASME) and regulatory requirements + Collaborate with design, electrical, mechanical, and quality teams to support development and production **What you need** + Strong understanding of material properties and selection criteria (required) + Experience with brazing, welding, and heat treatment processes (required) + Knowledge of statistical process control and design of experiments (required) + Ability to conduct root cause analysis and implement corrective actions (required) + Familiarity with ASTM, ISO, and ASME standards (required) + Master's degree in Materials Science, Mechanical, or Chemical Engineering with 2-5 years experience, or Bachelor's with 5-7 years (required) + Lean Six Sigma experience (advantage) + Must be a U.S. citizen and able to obtain and maintain a government security clearance (required) **What we offer** + Competitive pay and comprehensive health benefits + 401(k) with company match and retirement plans + Paid time off and flexible work arrangements + Professional development and training opportunities + Employee wellness programs and assistance resources + A collaborative environment working on mission-critical technology **What happens next** Apply online through Teledyne's careers page. If your qualifications align, our team will contact you for interviews and guide you through the clearance process. _Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Employment is contingent on background checks and compliance with applicable regulations._ **Salary Range:** $113,600.00-$151,400.000 **Pay Transparency** The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Geo-Logic Associates (GLA) is an employee-owned, multidisciplinary, civil, geologic, geotechnical, hydrogeologic, and environmental consulting firm. Our experienced professionals manage projects through 30 US office locations and an affiliate office in Peru. The firm was established in 1991. Our resources include well-qualified and experienced professionals with expertise in a diverse array of disciplines. Geo-Logic Associates is seeking a Staff Engineer to work collaboratively within the Design Team and Project Managers. Applicant ideally will be an accomplished user of AutoCAD Civil 3D, with experience in civil grading design, and solid waste and/or mining related projects ranging in size from less than 1 acre to 100+ acres. Key Responsibilities will include: Performing drainage analysis, volume calculations, cost estimates, and soil loss calculations Preparing a wide variety of construction drawings, conceptual site layouts, maps and as-built drawings, and other products to meet customer requirements Preparing designs such as site plans, grading and drainage plans, pump and piping plans, and conceptual layouts for civil earthworks, landfill grading and mine site design, and construction projects Completing design drawings and bid-ready construction detailed plans within a scheduled timeline and budget Field assignments to support ongoing construction quality assurance projects and occasional site visits to support design and construction activities and to attend meetings Assist in the production of project reports and materials Ability to read and understand schematics, diagrams, site plans, and aerial maps Establishing and maintaining effective working relationships with supervisors, co-workers, clients and employees in other departments and others as encountered in the course of work; this position requires the flexibility to best serve the needs of the firm and will perform other duties as assigned Requirements for the position: BS Degree in Engineering (Civil, Geologic, or related field) Minimum of 0-4 years of Civil, Environmental, Geotechnical or Construction Management experience is desired Experience in earthworks grading, landfill and/or mine design is a plus Must be proficient with Microsoft Office, AutoCAD and Civil 3D software Must have strong communication skills, verbal and written Ability to work well independently and within a team environment Ability to travel up to 50% of the time E.I.T., or ability to receive certification within 6 months of employment, is required with expectation to obtain licensure as a Professional Engineer Possession of a valid California Driver's License Candidate Must: Be eligible to work in the United States Pass a pre-employment physical and drug screen Pay range: $60,125 - $73,486 GLA offers a comprehensive benefits package including health/dental/vision insurance, 401(k) retirement plan, life insurance, flexible spending accounts, vacation leave, sick leave and profit sharing. Click "Apply" below to submit your cover letter, resume and application. Applicants who are unable to apply online may submit their resume and cover letter by mail to: Human Resources, Geo-Logic Associates, 2777 East Guasti Road, Suite 1 Ontario, CA 91761. (Resumes submitted through postal mail must indicate reference requisition #1038 on the front of the mailing envelope). GLA is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, marital status, sex, national origin, sexual orientation, gender identity, disability and protected veteran status or any other characteristic protected by law.

Details: We are looking for either a Project Engineer I or II depending on your experience. Please read below and apply if you feel that you have the right fit. We look forward to speaking with you. Project Engineer I: Assists with the delivery and completion of capital projects on time and within budget, working with external agencies and utilities. Project Engineer II: Manages multiple projects independently, overseeing the completion of capital projects, and may supervise support staff. Essential Duties & Responsibilities Project Engineer I: Assist with the oversight of construction activities for assigned capital projects. Coordinate internal and external resources to meet project goals. Monitor project schedules and budgets, recommending corrective actions when needed. Conduct quality control and inspection activities. Prepare periodic progress reports. Perform other duties as assigned. Project Engineer II: Oversee construction of multiple capital projects. Work independently on smaller projects as needed. Prioritize assigned projects and balance the needs of various functions. Monitor and adjust project schedules and budgets, implementing corrective actions. Provide oversight of quality control and inspections. Prepare and present progress reports. May supervise or direct support staff as needed. Minimum Qualifications Project Engineer I: Bachelor's degree in civil, mechanical, or environmental engineering, or a related field. Experience with project management software (MS Project preferred). Strong oral and written communication skills. Project Engineer II: Bachelor's degree in civil, mechanical, electrical, or environmental engineering, or a related field. Professional Engineer registration or Project Management certification preferred. At least 2 years of construction management experience in public works or utility projects. Proficiency in project management software, with knowledge of MS Project preferred. Strong communication and analytical skills. Qualities of a Successful Project Engineer I/II: Flexible, accountable, and passionate about work. Willingness to learn and grow. Strong customer service and "can-do' attitude. Highly organized and goal-driven. Approachable with strong interpersonal skills. Technical Knowledge & Competency Requirements Project Engineer I: Knowledge of project management, construction management, planning, and budgeting. Familiarity with fire department and local agency regulations. Ability to analyze project budgets and schedules and communicate effectively. Must be willing to travel as required, including occasional overnight stays and full-day trips. Project Engineer II: Working knowledge of project management, construction practices, and regulatory requirements. Strong ability to analyze project data and communicate findings effectively. Ability to make sound independent decisions and manage multiple projects simultaneously. Willingness to travel as required, including overnight stays and full-day trips. Please apply today for an immediate and confidential conversation! PTS is an Equal Opportunity Employer #IND1

Mesotech International, Inc. ("Mesotech") is a rapidly growing engineering and manufacturing company in Sacramento, California that focuses on aviation related meteorological and industrial monitoring systems. With over 30 years of experience in systems design, software design, hardware design, system integration, and installation, Mesotech is an excellent place to begin or expand your career. Job Description We have immediate openings for entry-level electronic systems engineers. This is a full-time, on-site position at our Rancho Cordova, CA facility. As an electronic systems engineer at Mesotech, you will join our successful team to design, build, install, and repair systems for the aviation weather and instrumentation markets. This is an ideal position for a new graduate who learns quickly, has good practical/hands-on skills, and is interested in unique world travel opportunities. Essential Functions and Responsibilities: Travel to military bases and commercial airports worldwide to install, upgrade, and support systems Work as part of a multi-disciplinary engineering team on new products, system integration, and retrofitting projects Develop bills of materials for parts and assemblies Prepare drawings and documentation for manufacturing purposes Provide engineering support for production and repair activities Other engineering tasks as required Qualifications Minimum Qualifications: BS in Electrical/Electronics Engineering from an ABET accredited engineering program. Must be a US Person. This position requires access to International Traffic in Arms Regulations (ITAR) restricted information. Willing and able to travel (domestic and international) Additional Information Mesotech offers a comprehensive and generous benefits program including health insurance, PTO, and 401k. The annual base pay range for this position is $67,000 to $80,000 per year (DOE), not including performance-based incentives. Mesotech is an equal opportunity employer.

Mesotech International, Inc. ("Mesotech") is a rapidly growing engineering and manufacturing company in Sacramento, California that focuses on aviation related meteorological and industrial monitoring systems. With over 30 years of experience in systems design, software design, hardware design, system integration, and installation, Mesotech is an excellent place to begin or expand your career. Job Description We have immediate openings for entry-level electronic systems engineers. This is a full-time, on-site position at our Rancho Cordova, CA facility. As an electronic systems engineer at Mesotech, you will join our successful team to design, build, install, and repair systems for the aviation weather and instrumentation markets. This is an ideal position for a new graduate who learns quickly, has good practical/hands-on skills, and is interested in unique world travel opportunities. Essential Functions and Responsibilities: Travel to military bases and commercial airports worldwide to install, upgrade, and support systems Work as part of a multi-disciplinary engineering team on new products, system integration, and retrofitting projects Develop bills of materials for parts and assemblies Prepare drawings and documentation for manufacturing purposes Provide engineering support for production and repair activities Other engineering tasks as required Qualifications Minimum Qualifications: BS in Electrical/Electronics Engineering from an ABET accredited engineering program. Must be a US Person. This position requires access to International Traffic in Arms Regulations (ITAR) restricted information. Willing and able to travel (domestic and international) Additional Information Mesotech offers a comprehensive and generous benefits program including health insurance, PTO, and 401k. The annual base pay range for this position is $67,000 to $80,000 per year (DOE), not including performance-based incentives. Mesotech is an equal opportunity employer.

and are looking for growth and opportunities? Look no further! We are a thriving commercial construction company founded in 1977. Our Mission and Vision: To be the most trusted building partner in the communities that we serve. This is our goal in EVERYTHING that we do. This is how we know we are successful as a company. To reach this, we understand that our relationships are everything. Our relationships with owners, each other, and our community. In our actions, we commit to: Be there for each other Support our communities Be transparent Make things right S+B James Construction has been setting the standard for excellence in healthcare, education, life sciences, commercial, retail, industrial, and public works construction in Southern Oregon and Northern California. S+B James is an equal opportunity Employer. All applicants must be authorized to work in the United States. H1B Visa Sponsorship is available for this position. Opportunities for Position Location: Bay Area (San Francisco, Oakland, Berkeley, etc.) Sacramento (including Central Valley) Southern California (including Moreno Valley) Responsibilities: Assist the Project Manager and Superintendent in the implementation of SBJ policies and execution of the project. Preparation, monitoring, and updating project schedules. Working with the project team to reduce project constraints' impact on the schedule. Preparation, maintenance, and implementation of various document control entities such as daily reports, material procurement logs, submittal logs, as-builds, testing and inspection logs, RFI logs, and change order logs. Distribution of new drawings, changes, approved submittals, RFI responses, and other project information to all affected parties. Preparing agendas, documents, meeting minutes, and actions for various meetings including but not limited to owner/architect/contractor meetings, subcontractor coordination meetings. Participating in project cost control Supports a culture of creativity and accountability in the business unit - solve problems in new ways while keeping organizational commitments. Actively promote SBJ's safety culture and practices. Provide insight and supervision for the development and maintenance of construction safety policies, procedures, and practices. What We're Looking For: Valid driver's license. Proficient computer skills in Microsoft Office, Procore, and scheduling software. Ability to read and interpret documents such as plans and specifications, safety rules, operating and maintenance instructions and procedure manuals. Knowledge of construction principles/practices required. Self-starter with strong organizational, file management, and time management skills. Proven ability to prioritize and manage multiple projects in a team-based environment Ability to problem solve and develop outcomes with multiple stakeholders A knowledge seeker who will ask why and research things they do not understand Someone who can work hard and play hard! Full Time / Salary Range: $80k- $95k per year depending on experience Benefits: 100% Health insurance for Employee 401(k) with company match Dental / Vision insurance Paid time off Sick Days Wellness Days Paid Holidays Discretionary Bonus Company sponsored events in the community Recruiting Bonuses Company Credit Card Phone Allowance Annual Christmas Party with Hotel Use of SBJ Kings Suite - Light the Beam!

MINIMUM EXPERIENCE: Mid-Level TRAVEL: Yes JOB TYPE: Full Time SALARY TYPE / HOURLY RATE: Salary Description The Project Engineer is a key component in the Project Management team workflow in terms of document control, record keeping, and clear communication with clients, subcontractors, vendors, and all Haggerty Construction Inc. (HCI) team members from project inception to completion. The minimum requirements for this position include, but are not limited to, the following: RESPONSIBILITIES Preconstruction Attend onsite and offsite design meetings with clients, consulting firms and/or engineers, and record meeting minutes Assist in the preparation of all necessary bid requests for design professionals as may be necessary Collaborate with Preconstruction Assistant and drafters to communicate design information and/or specific client requests as needed In early budgeting phase and final/hard bid scenarios, coordinate subcontractor bids, including preparing bid invitations, reviewing incoming bids for scope and pricing, scheduling site visits with subcontractors to review the scope of projects, acquiring best pricing from subcontractors and suppliers, and developing bid presentations Manage RFP process inclusive of pre-bid RFI tracking and document control Create and prepare takeoffs, estimates, and proposals for Project Manager review effectively with the right amount of detail and explanation of individual components of the budget and identify deficiencies in scope coverage Ensure a preliminary construction schedule has been developed for each estimate in collaboration with Project Manager Ensure project plans are submitted and retrieved from project specific authorities having jurisdiction (AHJ) Ensure prompt distribution of plan check comments with response deadlines with direction from Project Manager Review AHJ websites to download additional documents and/or required forms during plan check Construction Collaborate with Project Administrator for the creation of subcontracts, work orders, and purchase orders Write subcontracts and purchase orders under direction from Project Manager Assist project manager with scheduling Project kickoff meetings Attend onsite and offsite construction meetings with clients, consulting firms and/or engineers, and record meeting minutes Prompt and accurate distribution of project schedules, drawings and addenda, and other project specifications to subcontractors and vendors as required. Ensure subcontractor submittals match the project plans, specification book, and/or plan set Maintaining and updating the overarching project schedule and distributing to subcontractors Work with Superintendent to address daily construction issues and prepare/distribute RFIs as needed Price and prepare all job specific change orders as directed by the Project Manager Collaborate with Project Administrator during monthly billing procedures Maintain consistent communication rhythms with job specific subcontractors, Superintendents/Foreman, and vendors to ensure timely and profitable project completion Safety: Collaborates with Superintendent to complete a job hazard analysis for each project. Assists in achieving a zero-injury safety culture through the support of HCI's Safety Program Actively participates in safety meeting and training sessions Proactively identifies and communicates safety improvements and hazardous conditions to maintain a safe, healthy work environment and meet HCI safety standards Reviews all jobsite safety meeting notes Document Control Preparation, collection, tracking, recirculation, logging, and organization of all project-specific Schedules, Request for Information (RFI's), Submittals, and Construction Documents (CD's) Organization and logging of all Plan Sets ensuring the most current set is being referenced in Procore Maintaining organized job project folders on HCI's main server/repository and ensuring all project documents are available in Procore Accurate preparation of subcontractor contracts and purchase orders in compliance with the bid documents, budget, and estimate in HCI's current construction management software program Review Daily Reports and ensuring pertinent information is captured and addressed and then routed to the project specific Project Manager for approval Preparation and logging of all RFIs and Change Orders Organizes and labels as-builts, field, and office files for archiving upon completion of project Assists with data entry, print and distribution of master look ahead schedules Preparation of subcontractor bid packages as needed Ensuring bids received provide complete scope coverage by qualified subcontractors and material vendors Ensure the budget/proposal package is complete and accurate prior to delivery to client Reports To The Project Engineer reports directly to the Senior Project Manager Job Specific Required Skillset Excellent strategic thinking and decision-making skills Ability to foresee items and know and understand what lies ahead Ability to get the job done Strong facilitation and presentation skills Proven organizational skills and impeccable attention to detail. Must be able to manage multiple tasks and have excellent follow up skills both internally and externally. Critical thinking to prioritize and manage workload scope. Strong work ethic, deadline driven and a “Can Do Attitude”. Continued knowledge and up to date insight on changes & trends in methods of construction and materials, construction costs, wage rates, fringes, and working rules Ability to understand and grow experience with ALL types of construction and knowledge of industry practices, process, and standards Must engage in ongoing professional development, leadership, and position specific training and education Working knowledge of Microsoft Office programs including, but not limited to, Outlook, Word, Excel, and Project Working knowledge of Procore or Autodesk Construction software Ability to create and work with Adobe PDF's Ability to read and understand blueprints and perform take-off's General Requirements for All Positions: Ability to work independently as well as part of a larger team Excellent written and verbal communication skills and ability to understand the same Excellent listening and understanding skills Must be proactive, well organized, and have a strong ability to prioritize Extreme attention to detail Must be able to manage multiple tasks and have excellent follow up skills, both internally and externally Must be self-motivated, punctual, and professional in both presentation, appearance, and speech Provide solution-based responses to issues Able to lift a minimum of 25 pounds Fluent in the English language Reliable personal transportation and a motor vehicle driving record that is consistent with HCI's and insurance carrier's standards and policies Educational and Experience Considerations: Requires a minimum of 5 years of experience in the construction industry with a strong background in the preconstruction process, planning, design phase management, and managing multiple projects simultaneously Degree or Certification in Construction Management (preferred)

KGS Group is looking for an Electrical Engineer to join our Bellevue, WA or Granite Bay, CA. About Us We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We're different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right. As an employee-owned company, we're invested in our work and our people. Working with us means you'll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you'll have countless opportunities to learn and grow. Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast , we are looking for strong candidates at all levels to join our team! The Role As an Electrical Engineer, you will be responsible for providing engineering inputs integral to both small and large-scale hydro and dam projects. You will lead and mentor teams, support management of production and coordinate delivery of engineering work products often with multi-disciplinary project team members and external stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our hydropower capabilities and working with key staff in growing the business. You'll also be involved in supporting project management duties, coordinating with internal and external clients as well as assisting with guiding and mentoring other engineers within the team. In this role you will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out inspections for rehabilitation projects for dams and hydroelectric facilities. Your particular focus will be design delivery and mentorship, but you will also be involved in the proposal process. You will be working in a collaborative environment with a great team of engineers, technicians, scientists, and other industry-leading peers. Key Responsibilities Provide input to those managing and executing multiple projects (small to large) from the proposal stage through to completion Establish connections with other departments to support and enhance service delivery Work collaboratively with other disciplines and multidisciplinary project teams to execute project deliverables, as well as ensure that quality objectives, schedules, and budgets are met Mentor junior staff Design modifications to, or entirely new electrical, instrumentation, and controls systems related to dams, control structures, water retaining structures, switchyards and hydroelectric generating stations Conduct feasibility studies for proposed designs and assess costs and benefits for alternatives in a systematic and thorough manner. Manage and execute multiple projects from the proposal stage through to completion; Projects will include a variety of small to large projects involving water resources, flood control and hydroelectric sectors Prepare and review reports Perform calculations Conduct inspections and support project work on site as required Edit and prepare design specifications Conduct QA/QC reviews and facilitate the KGS's QA/QC process. Contribute to the development of the electrical engineering practice at KGS by assisting the electrical design leadership by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks. Perform other duties as assigned About You To fill the role, we're looking for an applicant to bring forward a good mix of qualifications and previous experiences. Some highlights should include: Minimum of a Bachelor of Science (BS) degree in electrical engineering from a recognized university; A post-graduate degree is an asset Minimum of 7-15 years of experience in electrical engineering with demonstrated project management skills (tracking budgets and meeting schedules) Must be registered as a Professional Engineer (P.E.) in Washington, Oregon, or California, as well as eligible for registration as a professional engineer in other states via comity within three months of starting. Previous consulting experience is preferred but not required. Excellent verbal and written communication skills Candidate must be self-motivated, and able to work independently with minimal supervision Must be able to effectively assume a lead role as project engineer and communicate project and technical information with clients Demonstrated experience in site investigations, condition assessments, design and construction support are preferred Experience with station service distribution (all voltages), medium voltage equipment, fixed bus power distribution systems, Programmable Logic Controller (PLC) automation (for equipment control), generators and transformers including related monitoring systems, communication systems, system grounding, hoists and gate automation and balance of plant systems for hydroelectric stations preferred, but industrial experience will be considered Experience with the following would be considered an asset: Backup power systems (including Uninterruptible Power Supply (UPS), Direct Current systems and fuel fired backup) Lighting (including emergency and exit lighting systems) Fiber and copper structured cable systems, and associated networking equipment Distributed Control System (DCS) and PLC Automation, Human Machine Interface (HMI) and Remote Terminal Unit (RTU) integration (including any programming experience) Protection systems experience, including specifying, setting and verifying (include reference to voltages) Load flow analysis, system modelling, arc-flash, grounding, and other electrical studies (include reference to software used and any training) North American Electric Reliability Corporation (NERC)/Critical Infrastructure Protection (CIP) planning Physical or cyber security planning or design Unit outage planning Other renewable energy experience Travel to project sites is usually limited but is required depending on project/client requirements. The amount of travel time desired by our employees can usually be accommodated. Must possess a valid driver's license and the ability/willingness to undergo security clearance checks Have the drive, attitude, and commitment to being an active participant in our employee-owned culture is a must The salary range for this position is $120,000 to $155,000 annually. Please note that the salary range mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate's experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization. KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package. KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process.