Staff engineer jobs in Lafayette, IN

Job Title: Electrical Engineer 5 Zip Code: 61552 Pay Rate: $67.33/hr. Keywords: #Mossvillejobs; #ElectricalEngineeringJobs. This position will have responsibility for defining and validating high voltage electrical components and systems (50V to over 1000V) and supporting powertrain integration for electrification programs (including diesel-electric, battery-electric, and hybrid machines), from concept through production. This position will be accountable for translating system requirements into appropriate high voltage electrical system designs while ensuring alignment with key safety standards. It will also have accountability for electrical system auditing, troubleshooting, validation, and issue resolution to ensure alignment to safety and regulatory standards and reliability expectations. Job Duties/Responsibilities may include, but are not limited to: * Analyzing HV systems for proper protections and arc flash mitigation, using tools like ETAP, Pspice * Creating electric powertrain system and sub-system diagrams * Ensuring proper overload protection device selection and coordination * Defining, integrating, and validating high voltage components in machine powertrain applications * Driving requirements definition in support of electrical safety standards (IEEE, NFPA, IEC, ISO, UN) * Assisting technical leads in conveying software requirements and component electronic information for HV diagnostics, events, and warnings to the various controls teams * Virtual audits of HV powertrain systems for grounding, bonding, and cable selection / routing * Supporting machine commissioning by evaluating compliance with standards, documenting and resolving issues and verifying safe operating procedures * Development of HV system design guides, leveraging best practices and lessons from prior machine projects * Sizing high voltage cables in powertrain applications * Troubleshooting and analysis of field data * Educating process partners on the hazards and best practices for working on high voltage electrical systems Education & Experience Required: - 10+ Years of experience - BS Engineering Degree required - NO 2 year degree"s - Open to Master"s with 8+ years Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws."

Compal is a world-leading manufacturer of diverse products, including notebook PCs, smart devices, and automotive electronics. Is this the next step in your career Find out if you are the right candidate by reading through the complete overview below. Engineers have the opportunity to work on cutting-edge projects xevrcyc and see their designs brought to life on a large, global scale.

We are seeking an experienced Embedded Firmware Engineer with a strong background in C programming, RTOS-based development, and device driver implementation for a long-term project with Caterpillar (Hiring Manager: Andy Braun) located in Mossville, IL. Responsibilities: Design, develop, and maintain embedded firmware in C for real-time systems. Develop and optimize device drivers for sensors, actuators, communication modules, and microcontroller peripherals. Work with RTOS environments (such as FreeRTOS, QNX, or similar) to implement deterministic, multi-threaded embedded applications. Perform firmware debugging, testing, and validation using oscilloscopes, logic analyzers, emulators, and other embedded tools. Collaborate with hardware, systems, and controls engineering teams to integrate firmware with embedded platforms. Participate in code reviews, documentation, and continuous improvement of system performance and reliability. Support root-cause analysis and resolution of firmware-related issues in prototype and production systems. Required Skills: 5-10+ years hands-on experience in embedded firmware development. Strong proficiency in C, low-level programming, and microcontroller-based systems. Expert knowledge of RTOS concepts: tasks, scheduling, interrupts, semaphores, queues, and memory management. Experience writing device drivers (SPI, I2C, UART, CAN, PWM, ADC, timers, GPIO, etc.). Familiarity with ARM-based processors or automotive/off-highway embedded systems is a plus. Experience in firmware debugging and system bring-up.

We are seeking an experienced Electrical Integration Engineer to support high-voltage system integration for advanced electrification projects. This role involves requirements development, analysis, component selection, and commissioning to ensure safety, performance, and compliance with industry standards. Key Responsibilities: Lead integration of high-voltage systems (>300V DC) across multiple projects. Develop requirements and perform system-level analysis. Select and validate electrical components for HV applications. Collaborate with global engineering teams and subject matter experts. Contribute to design guides and standard work for electrification initiatives. Required Qualifications: Bachelor's degree in Electrical or Mechanical Engineering (Master's preferred). 10+ years of experience in electrical systems integration (or 8+ with Master's). Strong understanding of electrical theory and HV systems. Proficiency with Microsoft Office tools. Preferred Qualifications: Knowledge of IEC, ISO, NFPA, IEEE standards. Experience with fuse coordination, cable sizing, arc flash, and short circuit analysis. Familiarity with ETAP, PSpice, MATLAB, Visio, and Creo Schematics. Work Environment: Office-based with occasional visits to technical centers.

We are seeking a skilled Manufacturing Engineer to join our dynamic team. Interested in learning more about this job Scroll down and find out what skills, experience and educational qualifications are needed. The ideal candidate will possess a strong background in manufacturing processes and engineering principles, with a focus on continuous improvement and efficiency. xevrcyc This role involves working closely with cross-functional teams to enhance production capabilities, ensure quality standards, and implement innovative solutions within our manufacturing facility.

SHEIN is a global online fashion and lifestyle retailer, offering SHEIN branded apparel and products from a global network of vendors, all at affordable prices. Headquartered in Singapore, SHEIN remains committed to making the beauty of fashion accessible to all, promoting its industry-leading, on-demand production methodology, for a smarter, future-ready industry. About The Role Logistics and Supply Chain are at the heart of SHEIN business. We ship and deliver tens of millions of products to hundreds of countries worldwide, every day. In these key roles, you'll come in to help us exceed productivity goals and deliver against our customer promises. Our scale is expansive and our presence is growing. With your help, SHEIN will continue to enable people to discover new worlds and implement innovation. This is your chance to make history. The Industrial Engineering team is a group of operational leaders driving process and operational system optimization, layout design, automation, and continuous improvement for the US Fulfillment Network. This team is essential to establishing best-in-class network performance across all process paths, accelerating the implementation of technological advancements, and strengthening the technical acumen and process knowledge of the operational leaders across the FC network. As SHEIN US continues to rapidly grow the FC footprint and infuse the organization with new talent, we need to ensure the operations teams are equipped with the functional expertise to successfully deliver expected gains for technology advances and network-wide process improvements. The team would drive process control and shifting mean performance with the outcome of minimizing variation between shifts, buildings, and regions, to deliver strong operation performance. The team will work closely with the Site Operations, Product, Planning, and Operation Management team to improve the input metrics for each of the process paths by prioritizing and channeling resources to address gaps in these input metrics. Key Responsibilities: Conduct time studies, workflow analysis, and process mapping to identify inefficiencies and bottlenecks in warehouse operations. Use data analysis and statistical methods to develop solutions for improving process flow, labor utilization, and overall operational performance. Collaborate with operational teams to implement and test process changes, ensuring seamless integration and minimal disruption to daily operations. Drive projects focused on cost reduction, space optimization, labor productivity, and quality improvement within the warehouse environment. Utilize engineering principles and tools to design and implement systems that enhance safety, ergonomics, and overall working conditions for warehouse associates. Generate reports, presentations, and documentation to communicate project findings, progress, and recommendations to stakeholders at various levels. Participate in cross-functional initiatives and continuous improvement projects to support the overall growth and success of SHEIN's operations. Skills & Qualifications: Bachelor's degree in Industrial Engineering or a related field. Strong analytical and problem-solving skills with a data-driven approach. Proficiency in data analysis tools such as CAD, Excel, SQL, and statistical software. Excellent communication and collaboration skills to work effectively with diverse teams. Ability to thrive in a fast-paced, dynamic environment with a focus on innovation and continuous improvement. Familiarity with warehouse management systems (WMS) is a plus. Benefits and Culture Healthcare (medical, dental, vision, prescription drugs) Health Savings Account with Employer Funding Flexible Spending Accounts (Healthcare and Dependent care) Company-Paid Basic Life/AD&D insurance Company-Paid Short-Term and Long-Term Disability Voluntary Benefit Offerings (Voluntary Life/AD&D, Hospital Indemnity, Critical Illness, and Accident) Employee Assistance Program Business Travel Accident Insurance 401(k) Savings Plan with discretionary company match and access to a financial advisor Vacation, paid holidays, floating holidays, and sick days Employee discounts Free weekly catered lunch Free swag giveaways Annual Holiday Party Invitations to pop-ups and other company events SHEIN is an equal opportunity employer committed to a diverse workplace environment.

Process Alliance is a leading engineering consultancy firm dedicated to delivering innovative solutions in engineering, automation, manufacturing services, and medical devices. With a commitment to being a better model of problem solving, we have been at the forefront of providing cutting-edge engineering services to clients across the life science industry. Our team of experts thrives on solving complex challenges and driving technological advancements to meet the evolving needs of our clients. Overview: We are seeking a C&Q Engineer to support the successful startup, commissioning, and operational handover of new or upgraded pharmaceutical manufacturing systems. This role is ideal for an engineer with strong project execution skills and hands-on experience in commissioning, qualification, and operations support in GMP environments. Key Responsibilities: Support operational readiness planning for new equipment, utilities, and manufacturing areas. Own or support Commissioning & Qualification (C&Q) activities including protocol development, execution, and issue resolution. Assist with manufacturing equipment and process startup, troubleshooting issues during early batches, and improving operational reliability. Develop and update SOPs, batch records, and operational readiness documentation. Coordinate operator training, readiness checklists, and manufacturing process walkdowns. Drive operational improvements and ensure compliance with GMP, safety, and regulatory requirements. Required Qualifications: Bachelor's degree in Engineering (Chemical, Mechanical, Biomedical, Industrial, or related discipline required). 3-5 years of engineering experience in pharmaceutical, biotech, or other regulated life sciences manufacturing. Project management experience supporting capital projects, equipment installation, or cross-functional readiness activities. Hands-on experience with startups, C&Q activities, FAT/SAT, or equipment installation. Strong understanding of GMP operations, documentation, and validation principles. Ability to work collaboratively across engineering, quality, and operations teams. About Our Culture: At Process Alliance, we strive to be a better model for how problems are solved, and solutions are delivered. We believe in providing a supportive and inclusive work environment where employees can thrive both personally and professionally. Join our team and be part of a company that is shaping the future of engineering solutions. Learn more about us: Visit our website at *********************** to explore our projects, expertise, and the impact we make in the engineering and consultancy space. Process Alliance is an equal opportunity employer. We encourage applications from candidates of all backgrounds and experiences

**Your Work Shapes the World at Caterpillar Inc.** When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. **Start Your Career with Purpose** Are you ready to apply your engineering education to real-world challenges? Caterpillar's Engineering Rotational Development Program (ERDP) is designed for entry-level professionals like you. Through rotational assignments, you'll continue developing your skills and knowledge-helping you achieve your career goals while contributing to Caterpillar's mission of delivering exceptional products, services, and technologies to our customers. Our Engineering Rotational Development Program is an entry-level program designed to build employees' skill sets within the discipline and continue growth, even after the successful completion of the program. This 12 to 18-month program provides practical experience across multiple engineering teams and technologies. It's more than just a job, it's a launchpad for your future at one of the world's leading manufacturers of construction and mining equipment. **What the Program Offers** As part of the ERDP, you'll rotate through different teams and projects that match your skills, knowledge, and abilities. You'll work on meaningful projects, connect with mentors, and get exposure to various areas of the company. Here are just a few paths you might explore: + **Product Design:** Design components and systems for Caterpillar products to meet customer needs. Collaborate with cross-functional teams throughout the value chain-from concept to production-to deliver effective solutions. + **Simulation/Performance Analysis:** CFD [Computational Fluid Dynamics] (ANSYS), FEA [Finite Element Analysis], 3D modelling, autonomy sensor and photorealistic environment root cause investigation, system/subsystem/component design optimization, structural dynamics, development and optimization of engine, aftertreatment, battery, fuel cell, powertrain, machine system performance, and/or autonomy and multiple machine coordination. + **Test/Validation/Hands-on:** Apply strong mechanical engineering understanding in a test/validation (hands-on) environment, troubleshooting issues, and collaborating with others for optimal results. + **Controls Development:** Develop/implement control system algorithms using Matlab/Simulink for various control systems including, but not limited to, engine controllers, machine implement controllers, as well as powertrain controllers. Will be responsible for understanding the feature requirement, implementing it, as well as testing it prior to a production rollout. + **Electronic Components:** Will be responsible for designing and testing various electronic control modules, as well as various electronic components. Will work with various internal Caterpillar clients to understand controller/component requirements, help design PCB [Printed Circuit Board] layouts, as well as perform digital/analog/power circuit analysis and testing. Other duties may include working with suppliers, testing the controllers/components in various environments, ensuring that FMEAs [Failure Mode and Effects Analysis] are conducted and documented to meet stringent Caterpillar quality requirements. + **Embedded Software Development:** Develop embedded software in C, C#, and/or C++ for various electronic control modules. Some examples of embedded software development applications include Datalink communications, inputs and outputs (sensors and actuators), speed calculation, injection/spark timing, memory management, CPU optimization, multi-core design and implementation, autonomy algorithms for perception, localization, planning, etc. In addition, some areas of work include developing scripts in Python/Visual Basic for automation. + **Software Validation/Verification for Electronic Systems:** Verify functionality of a feature or control system algorithm on a HIL [Hardware in the Loop] simulator bench or a SIL [Software in the Loop] system. Understand the requirements of the feature and/or the schematics of the controller/control system, verify functionality and debug/report anomalies to the development team, and help validate fixes. + **Engineering Data Analytics:** Ability to write and understand computer code, Python, analytics/data science experience, exposure to machine learning concepts/tools, engineering and statistics fundamentals. + **Process Engineering:** Apply mechanical, manufacturing, systems and/or industrial engineering knowledge to analyze and optimize an engineering process or processes. Will have the opportunity to leverage problem-solving and communication skills. **What You Have - Skills and Experiences** In this role, you will have the opportunity to contribute your unique skills and experiences. Below are some of the most critical skills: + Analytical skills, initiating ideas, troubleshooting, root cause analysis, problem-solving, and critical thinking capabilities + Knowledge of engineering principles, theory, and engineering experience gained through projects, internships, and/or relevant work experience + Fundamental understanding of engineering for a manufacturing environment and the ability to design and implement materials, structures, machines, devices, systems, and processes that safely realize a desired objective or invention + Ability to manage multiple projects simultaneously and quickly acquire and apply new skills and knowledge + Collaborate with others of diverse cultures, interpersonal styles, and abilities + Strong written and verbal communication skills + Participate in and build on our inclusive, constructive, and productive work environment + Ensure all team members' contributions are recognized and valued + This position requires 12 months or less of professional experience in this field (excluding internships) **Program Qualifications** + ABET-accredited Bachelor's or Master's degree in Mechanical, Electrical, Computer, Agricultural, or Aerospace Engineering; Engineering Technology; or a related technical discipline (selected candidates must obtain their degree before they start) + Minimum cumulative GPA of 3.0/4.0 or higher (unrounded) + Willing to relocate and travel as needed **Top Candidates May Also Have** + Involvement with a campus design/competition team or related experience + Project or team leadership experience + Previous technical internship/co-op or relevant experience + Excellent interpersonal and communication skills + Intellectual curiosity, adaptability, and a willingness to learn by doing **Additional Information** + Please attach your resume and an unofficial copy of your transcript to your application + Applicants will be considered for positions throughout the United States + Most positions are based in **Peoria, Illinois** , with limited availability in other United States' locations + This is a **Monday through Friday, in-person opportunity** -perfect for building relationships, learning fast, and diving deep into your rotations + Sponsorship is **NOT** available for this position + Relocation is available to those who qualify + **2026 available start dates** - February 2, 2026; June 1, 2026; July 13, 2026; and August 3, 2026 (seats are limited for each start date) **Why Choose Caterpillar?** We're a values-driven company where you'll feel your work matters-whether you're optimizing machine performance, writing embedded code, or designing the next innovation in clean energy. You'll gain access to top-tier mentorship, technical resources, and real ownership of your work from day one. **Final Details** Please regularly check the email associated with your application-including your junk/spam folder-as this will be our primary method of communication. To check the status of your application, please visit our career website using the candidate login, as it will reflect any updates to your status. Interested applicants should explore our direct hire positions at ******************************* . For more information, visit caterpillar.com. To connect with us on social media, visit caterpillar.com/social-media. **Summary Pay Range:** $79,800.00 - $143,520.00 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. **Benefits:** Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. + Medical, dental, and vision benefits* + Paid time off plan (Vacation, Holidays, Volunteer, etc.)* + 401(k) savings plans* + Health Savings Account (HSA)* + Flexible Spending Accounts (FSAs)* + Health Lifestyle Programs* + Employee Assistance Program* + Voluntary Benefits and Employee Discounts* + Career Development* + Incentive bonus* + Disability benefits + Life Insurance + Parental leave + Adoption benefits + Tuition Reimbursement * These benefits also apply to part-time employees This position requires working onsite five days a week. Relocation is available for this position. Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at **************************** **Posting Dates:** August 22, 2025 - December 30, 2025 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community (*********************************************** .

Established in 1991, Collabera has been a leader in IT staffing for over 22 years and is one of the largest diversity IT staffing firms in the industry. As a half a billion dollar IT company, with more than 9,000 professionals across 30+ offices, Collabera offers comprehensive, cost-effective IT staffing & IT Services. We provide services to Fortune 500 and mid-size companies to meet their talent needs with high quality IT resources through Staff Augmentation, Global Talent Management, Value Added Services through CLASS (Competency Leveraged Advanced Staffing & Solutions) Permanent Placement Services and Vendor Management Programs. Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Job Description Candidate Responsibilities: The primary responsibilities of this position are to develop cost models to support IPSD's cost reduction efforts. This position will work with Engineering and Global Purchasing to calculate part number price and compare to purchase order price. Job Duties/Responsibilities may include, but are not limited to: * Develop cost models * Contribute and enable new products or processes * Develop and manage the project to the plan * Perform needs analysis and initiate ideas * Evaluate new products and/or processes * Keep up to date on new technologies or develop new technologies Required Qualifications: * Four year Engineering/Computer Science degree or with equivalent experience * Excellent analytical skills * Ability to communicate technical information effectively * Excel, Power point Preferred Qualifications: * Database (SQL, Access) and programming skills * Knowledge of manufacturing processes Typical Day: Work with team members from several teams such as engineering, purchasing and manufacturing to develop cost models. Typical day would be working on the computer to run the cost models and have 1 or two meetings to have discussion with the requester of the cost model. Work with manufacturing individuals and purchasing to gather information. Qualifications Technical Skills: Excel, Powerpoint required SQL, ACCESS and Programming skills highly desired. Soft Skills: Team player who works with diverse teams to gather and present information. Additional Information To know more about the position, please contact: Jeff Demaala ************

Function Manages the design, maintenance, or improvement of new or existing products and/or processes utilizing engineering techniques. The primary magnet wire area of focus is enameling fluid dynamics and copper/aluminum metallurgy for electric vehicle applications. Manages research and development assignments pursuant to Rea's product development process. Supports and implements plans to meet Rea's corporate initiatives in alignment with the company's EV automotive strategy. Duties and Responsibilities Leads and manages a team that designs, models, and tests prototypes for products/process development and/or improvement. Conducts research and creates design proposals for projects. Establishes design briefs. Creates concepts, performance, and production criteria. Identifies and selects materials needed for production. Produces final design specifications. Creates parts lists. Lists costs involved in production. Supports concept sample production for demonstration. Utilizes computational analysis for theoretical design conception, demonstration, and verification. Manages technical activities on assigned automotive product development projects. Ensures production procedures and controls are developed to efficiently utilize equipment to achieve desired productivity and capability metrics in the project charter. Works and collaborates with plant members of APQP team to ensure successful completion of Rea's product development process through “Production Support” - Phase 5. Provides technical interface between key customers and Rea team members. Supports and implements various tasks, projects, and actions in support of Rea's EV automotive strategy. Position Specifications Bachelor's degree in Engineering or related field; Master's degree desired. Preferably metallurgy, mechanical or chemical disciplines. Ten years of product/process engineering experience. Knowledge of magnet wire products and applications preferred. Knowledge of engineering techniques with a strong emphasis on fluid mechanics and metallurgy. Hands on experience with production equipment and lab equipment. Appreciation for continuous improvement on design and testing practices and overall improvements for the manufacturing of products. Knowledge of project planning and management and automotive product development practices (APQP). Ability to problem solve and correct situations using engineering first principles. Ability to listen, manage, and contribute depending on situation, and work well within team environment. Effective customer communication skills. Travel 20-30% domestically; 10% internationally. Rea will not sponsor work visas for this role.

Job Description RTI Surgical is now Evergen! This rebranding reflects our strategic evolution as a leading CDMO in regenerative medicine and comes at the end of a significant year for the business, including the successful acquisitions of Cook Biotech in IN. and Collagen Solutions, MN. Our new brand identity emphasizes our unique positioning as the only CDMO offering a comprehensive portfolio of allograft and xenograft biomaterials at scale. Evergen is a global industry-leading contract development and manufacturing organization (CDMO) in regenerative medicine. As the only regenerative medicine company that offers a differentiated portfolio of allograft and xenograft biomaterials at scale, Evergen is headquartered in Alachua, FL, and has manufacturing facilities in West Lafayette, IN., Eden Prairie and Glencoe, MN., Neunkirchen, DE., Glasgow, UK., and Marton, NZ. Read more about this change and Evergen's commitment to advancing regenerative medicine here: ************************ RESPONSIBILITIES Leads project workstreams in the design and development of new devices and improvements to existing designs leveraging previous experience with minimal support to derive unique solutions and approaches to drive project success Applies sound engineering problem-solving techniques to resolve challenges during the product development process and analyzes data to draw conclusions using statistically sound and scientifically-based methodology Leverages experience and technical knowledge to proactively develop strategies and plans of execution to derive unique solutions and approaches to contribute to project success Writes protocols, reports, Standard Operating Procedures (SOPs), and other technical documents in accordance with Good Documentation Practices with a high attention to detail. Applies principles of ISO 13485 and ISO 14971 Designs, develops, and validates test methods to meet design requirements. Effectively leads discussions and builds consensus with quality, regulatory, engineering, and production teams throughout the product development process to meet project objectives Leads discussions with internal or external customers to obtain design requirements and feedback on prototype designs with a high level of customer service Maintains project timelines by providing appropriate inputs, target times, and resource needs Applies clinical knowledge in relevant surgical procedures and disease states within a clinical segment to develop innovative solutions to satisfy customer needs Evaluates product design for manufacturability and suggests design process adjustments and quality improvements Participates in the selection, development, and testing of tools, fixtures, machinery, and equipment used in manufacturing Other duties as assigned REQUIREMENTS Education Bachelor's of Science Degree in Biomedical Engineering or another relevant engineering discipline. Experience 4 to 6 years of engineering experience designing or modifying medical devices or implants. Certification N/A Skills Excellent verbal and written communication skills Effective negotiation skills Competency in Enterprise Resource Planning (ERP) software Computer program expertise and knowledge of Microsoft Suite, especially Excel Continuous Improvement methodologies Travel 10% or less SAFETY Physical Requirement Move or lift objects up to 25 pounds Frequent (>75%) stationary position (standing or sitting) while utilizing digital displays Frequent (>75%) fine manipulation using hands and fingers (typing, opening, writing, clicking, paper sorting, etc.) Working Environment Onsite: Office environment with assigned workstation Remote positions only: Home office environment with minimum distractions. More about Evergen: Evergen provides customers across a diverse set of market segments with leading-edge expertise, scale, and flexibility across end-to-end services including design, development, regulatory support, verification and validation, manufacturing, and supply chain management. Evergen is rooted in a steadfast commitment to quality, integrity, and patient safety with a focus on five key values: Accountable: We own our actions and decisions. Agile: We embrace change to stay ahead of the curve and evolve to drive innovation and growth. Growth Mindset: We embrace challenges as opportunities for continuous learning. Customer-Centric: We prioritize customers at every touch point. Inclusive: We thrive on the richness of our diversity and ensure every voice is heard, respected, and celebrated. At Evergen, we are committed to fostering an inclusive workplace where we embrace the richness of our diversity and ensure that every voice is heard, respected, and celebrated. We believe that by embracing diversity and promoting inclusivity, we not only uphold our values but also strengthen our position as the CDMO of Choice in regenerative medicine solutions. We recognize that cultivating a growth mindset is essential to our success, and we are dedicated to continuous learning and improvement in our diversity, equity, and inclusion efforts. Through accountability and action, we strive to create an environment where individuals can thrive, innovate, and contribute their unique perspectives to drive our collective success. Montagu Private Equity (“Montagu”), a leading European private equity firm, acquired RTI in 2020 and has supported the transformation of the company to its next level of potential. #LI-Onsite

RTI Surgical is now Evergen! This rebranding reflects our strategic evolution as a leading CDMO in regenerative medicine and comes at the end of a significant year for the business, including the successful acquisitions of Cook Biotech in IN. and Collagen Solutions, MN. Our new brand identity emphasizes our unique positioning as the only CDMO offering a comprehensive portfolio of allograft and xenograft biomaterials at scale. Evergen is a global industry-leading contract development and manufacturing organization (CDMO) in regenerative medicine. As the only regenerative medicine company that offers a differentiated portfolio of allograft and xenograft biomaterials at scale, Evergen is headquartered in Alachua, FL, and has manufacturing facilities in West Lafayette, IN., Eden Prairie and Glencoe, MN., Neunkirchen, DE., Glasgow, UK., and Marton, NZ. Read more about this change and Evergen's commitment to advancing regenerative medicine here: ************************ ; RESPONSIBILITIES Leads project workstreams in the design and development of new devices and improvements to existing designs leveraging previous experience with minimal support to derive unique solutions and approaches to drive project success Applies sound engineering problem-solving techniques to resolve challenges during the product development process and analyzes data to draw conclusions using statistically sound and scientifically-based methodology Leverages experience and technical knowledge to proactively develop strategies and plans of execution to derive unique solutions and approaches to contribute to project success Writes protocols, reports, Standard Operating Procedures (SOPs), and other technical documents in accordance with Good Documentation Practices with a high attention to detail. Applies principles of ISO 13485 and ISO 14971 Designs, develops, and validates test methods to meet design requirements. Effectively leads discussions and builds consensus with quality, regulatory, engineering, and production teams throughout the product development process to meet project objectives Leads discussions with internal or external customers to obtain design requirements and feedback on prototype designs with a high level of customer service Maintains project timelines by providing appropriate inputs, target times, and resource needs Applies clinical knowledge in relevant surgical procedures and disease states within a clinical segment to develop innovative solutions to satisfy customer needs Evaluates product design for manufacturability and suggests design process adjustments and quality improvements Participates in the selection, development, and testing of tools, fixtures, machinery, and equipment used in manufacturing Other duties as assigned REQUIREMENTS Education Bachelor's of Science Degree in Biomedical Engineering or another relevant engineering discipline. Experience 4 to 6 years of engineering experience designing or modifying medical devices or implants. Certification N/A Skills Excellent verbal and written communication skills Effective negotiation skills Competency in Enterprise Resource Planning (ERP) software Computer program expertise and knowledge of Microsoft Suite, especially Excel Continuous Improvement methodologies Travel 10% or less SAFETY Physical Requirement Move or lift objects up to 25 pounds Frequent (>75%) stationary position (standing or sitting) while utilizing digital displays Frequent (>75%) fine manipulation using hands and fingers (typing, opening, writing, clicking, paper sorting, etc.) Working Environment Onsite: Office environment with assigned workstation Remote positions only: Home office environment with minimum distractions. More about Evergen: Evergen provides customers across a diverse set of market segments with leading-edge expertise, scale, and flexibility across end-to-end services including design, development, regulatory support, verification and validation, manufacturing, and supply chain management. Evergen is rooted in a steadfast commitment to quality, integrity, and patient safety with a focus on five key values: Accountable: We own our actions and decisions. Agile: We embrace change to stay ahead of the curve and evolve to drive innovation and growth. Growth Mindset: We embrace challenges as opportunities for continuous learning. Customer-Centric: We prioritize customers at every touch point. Inclusive: We thrive on the richness of our diversity and ensure every voice is heard, respected, and celebrated. At Evergen, we are committed to fostering an inclusive workplace where we embrace the richness of our diversity and ensure that every voice is heard, respected, and celebrated. We believe that by embracing diversity and promoting inclusivity, we not only uphold our values but also strengthen our position as the CDMO of Choice in regenerative medicine solutions. We recognize that cultivating a growth mindset is essential to our success, and we are dedicated to continuous learning and improvement in our diversity, equity, and inclusion efforts. Through accountability and action, we strive to create an environment where individuals can thrive, innovate, and contribute their unique perspectives to drive our collective success. Montagu Private Equity (“Montagu”), a leading European private equity firm, acquired RTI in 2020 and has supported the transformation of the company to its next level of potential. #LI-Onsite

Garrett Advancing Motion is the true pioneer of automotive powertrain technologies dating back more than 60 years. It continues today as the world's leader in technology solutions for passenger cars, commercial vehicles and off-highway equipment. Garrett supplies technology to nearly all major automakers in addition to the global aftermarket under the Garrett brand name. As a result, unlike many other OEM or supplier organizations, Garrett Advancing Motion has visibility across a broad range of OEM's and Tier 1 suppliers. As a Development Engineer in Carmel, IN, you will be responsible for launching new product design and new applications at the customer and developing top down functional requirement and design, simulate and qualify full product to meet customer needs. You will have end to end responsibility for flawless launch, with performance / cost / reliability / APQP and timing. You will be responsible for launching new product design and new applications at the customer and developing top down functional requirement and design, simulate and qualify full product to meet customer needs. You will have end to end responsibility for flawless launch, with performance / cost / reliability / APQP and timing. Your responsibilities: End to End Product Ownership, meeting all turbocharger functional requirements (Performance, Reliability, Quality, Costs & Timing) to meet engine specifications Matching, Design, Simulation, Validation (DVP&R), Turbo Release (TRA) Accountable for Internal & External APQP (advanced product planning quality) on full Bill Of Material - Sign off turbo, component PPAP deviations (APQP output) Customer Interface - Single Point of Contact to Customer for Launch Accountable for 2D & 3D creation and quality according to documented Design Standards & guidelines Ensure proper application & use of standard Design processes & tools, as defined by functional matrix Support Design quality issue investigations (8D's) and lead implementation of corrective actions Minimum Qualifications: Bachelor's Degree in Mechanical Engineering or related engineering field 7+ years of experience with developing and/or launching turbochargers or diesel & natural gas powertrain products in the automotive or similar industry Proven track record with product validation and launch experience as well as product development and component design in automotive industry Experience with direct customer interface Strong communications skills and sense of urgency Team player, growth and customer focus Desired Qualifications: Experience in turbomachinery, mechanical design or testing Experience with casting, machining, and assembly of hardware Experience with FEA and/or CFD simulation tools Experience with 3D design tools Six Sigma GB certification Eager to learn and acquire new skills and new capabilities Garrett is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, or veteran status. #LI-CR1

Marous Brothers Construction (MBC) is seeking a self-motivated Project Engineer for our Building Groups in West Lafayette, IN! MBC is recognized as one of the leading construction firms in the Midwest, offering integrated services for complete construction solutions. Learn more about MBC by visiting ******************************* Join Marous Brothers Construction as a Full-Time Project Engineer, also known as Assistant Project Manager, and elevate your career to new heights! Located near Purdue University's campus, this onsite position offers you the exhilarating opportunity to shape innovative projects that leave a lasting impact. Your Journey Starts Here: As an Assistant Project Manager, you'll support daily operations across dynamic jobsites. You'll manage RFIs, submittals, material deliveries, and project documentation. Collaborate with seasoned professionals, solve problems creatively, and help drive project success. You should possess a problem-solving mindset, ready to think outside the box when challenges arise on job sites. Time management skills are critical for meeting deadlines and ensuring project milestones are achieved. What Powers Your Path to Success: * Bachelor's degree or equivalent experience * 1-3 years in a Project Engineer or similar role * Strong communication, organization, and analytical skills * Familiarity with project management software * A proactive, ethical, and team-oriented mindset Why join our team? * Top Workplace 2025, 2024, 2023, & 2022 - The Plain Dealer & cleveland.com * Top Workplace USA 2025 * Competitive compensation package * Bonuses * Health insurance 3 Plan Options, including HSA & FSA * HSA & FSA Annual Company Contribution * $3,000 Referral Bonus * Employee fitness room * Employee open kitchen * Employee outdoor courtyard meeting/gathering space * Marous University - weekly free relevant education * Monthly culture events * Tuition Reimbursement Program * Career path opportunities * Flexible Scheduling * Mentor Program * Stability - family owned and operated since 1980 * Medical * Dental * Orthodontic * Vision * Virtual Mental and Physical Health * Accident Insurance * Critical Illness * Hospital Indemnity * Life Insurance/AD&D *company paid* * 401k with employer match * Paid Time Off * Paid Holidays * Parental Leave * STD & LTD *company paid* * Paid maternity leave via STD * Travel Reimbursement * Free Parking * Employee Assistance Program, including Legal & Financial *company paid* * Casual Fridays * Community Support Program Looking for a team that invests in you? We're searching for driven talent to shape the future. Ready to lead the next chapter of Boilermaker success? Marous Brothers Construction is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. MBC is also committed to compliance with all fair employment practices regarding citizenship and immigration status. We conduct pre-employment drug testing. Also must be able to pass background check.

About the Job: A Project Engineer is expected to support the planning, execution, and technical aspects of crane and rigging projects while ensuring safety, compliance, and effective communication among teams. This role involves a combination of engineering expertise, project coordination, and hands-on support to ensure successful project outcomes. This position may be offered as a permanent role or on a contract basis, depending on candidate's preference and business needs. Job Requirements: * Experience: 2-5 years of experience in project engineering, preferably within the crane, rigging, or heavy lifting industry. * Certifications: Professional Engineer (PE) license is a plus, OSHA 10 * Education: Bachelor's Degree in Mechanical Engineering, Civil Engineering, or a related field from an ABET accredited 4-year university. * Technical Proficiency: Must possess the ability to perform detailed load calculations and structural analyses to ensure safe lifting operations. This requires an in-depth understanding of various cranes, hoists, rigging equipment, and their specific applications. Proficiency with CAD, 3D modeling software, and industry-specific tools such as AutoCAD, Inventor, Lift Planner, or similar programs is essential. Additionally, strong knowledge of relevant standards and regulations, including OSHA, AISC, ASME, ANSI, and others specific to lifting and rigging, is necessary to maintain compliance and uphold industry best practices. * Software Proficiency: Familiarity with engineering software (i.e. RISA-3D, Ansys, Mathcad, MS Excel), as well as ERP systems, scheduling software, and Microsoft Office Suite. * Problem-Solving and Analytical Expertise: Skilled in diagnosing and resolving technical and logistical issues in crane and rigging operations, with strong analytical abilities for engineering calculations, lift plan optimization, and meticulous attention to detail in documentation and safety protocols. * Communication: Strong verbal and written communication skills for engaging with clients, site managers, and team members; ability to work collaboratively with project managers, engineers, crane operators, and rigging teams; proficient in preparing and presenting project reports, technical documentation, and lift plans. * Project Management Skills: Ability to estimate project costs and create and maintain project schedules to ensure projects stay on track and meet deadlines. * Physical Requirements: Willingness to travel to project sites as needed. Ability to work in a variety of environments, including outdoor and construction sites, and conduct on-site inspections, which may involve standing, walking, crawling, and climbing ladders or scaffolding. * Fit for Duty: Must pass a drug test, fit for duty and background check. Job Responsibilities: * Create detailed lift plans, including equipment selection, rigging configurations, and lift procedures. * Perform load calculations and structural analysis to ensure safe and efficient lifting operations. * Assist in selecting appropriate cranes and rigging equipment based on project needs and load requirements. * Work with senior engineers to support the design of custom rigging solutions and equipment modifications. * Assist in coordinating project tasks, schedules, and resources, ensuring timely completion of crane and rigging operations. * Track and report on project milestones, timelines, and costs, identifying any potential delays or budget issues. * Support the development and management of project schedules to ensure project deadlines are met. * Provide technical support during lifting operations, ensuring adherence to the lift plan and safety procedures. * Monitor and ensure compliance with safety regulations (e.g., OSHA, ASME) during project execution. * Conduct risk assessments and contribute to implementing safety protocols and operational limits to mitigate hazards. * Perform site inspections and assist with identifying safety hazards or engineering challenges before and during lifting operations. * Work closely with crane operators, riggers, and other engineers to ensure smooth coordination of field operations. * Liaise with clients and project managers to discuss project requirements, progress, and technical solutions. * Prepare and maintain detailed project documentation, including lift plans, inspection reports, and change orders. * Assist in maintaining daily logs of activities, equipment use, and personnel on-site for record-keeping and project tracking. * Assist in preparing progress reports for senior engineers and project managers, highlighting key milestones, challenges, and solutions. * Assist in identifying and resolving technical issues that arise during lifting operations. * Support the development and implementation of best practices to improve operational efficiency, safety, and cost-effectiveness. * Assist in mentoring junior engineers or interns by providing guidance and technical training. * Participate in post-job reviews to evaluate performance, identify lessons learned, and recommend improvements for future projects. Barnhart Offers: * Competitive salary. * Bonus program that pays for performance. * $1 for $1 match on 401(k), capped at 10% of Pay. * Company Vehicle. * Medical, Paid Time Off and Holiday, Disability, Life Insurance, and other additional personal and professional benefits are available. * Barnhart CARES * The CARES program is the means by which we seek to care for our employees and for the communities in which we work. To support our employees, we offer free resources, both online and in-person, including some resources available to members of their families. These resources support and guide our team members as they pursue emotionally, financially, and spiritually healthy lives. PURPOSE - Barnhart is built on a strong foundation of serving others. The fruit of our labor is used to grow the company, care for our employees, and serve those in our communities and around the world. MINDS OVER MATTER - Barnhart has built a nationwide reputation for solving problems. We specialize in the lifting, heavy-rigging, and heavy transport of major components used in American industry. NETWORK - Barnhart has built teams that form one of our industry's strongest networks of talent and resources with over 60 branch locations across the U.S. working together to serve our customers. This growing network offers our team members constant opportunity for career growth and professional development. CULTURE - Barnhart has a strong team culture -- the "One TEAM." We are looking for smart, hardworking people who strive for excellence in their work and appreciate collaboration. Join a team that values Safety, Servant Leadership, Quality Service, Innovation, Continuous Improvement, Fairness, and Profit with a Purpose. EOE/AA Minority/Female/Disability/Veteran #LI-MB1

Acuity Inc. (NYSE: AYI) is a market-leading industrial technology company. We use technology to solve problems in spaces, light and more things to come. Through our two business segments, Acuity Brands Lighting (ABL) and Acuity Intelligent Spaces (AIS), we design, manufacture, and bring to market products and services that make a valuable difference in people's lives. We achieve growth through the development of innovative new products and services, including lighting, lighting controls, building management solutions, and an audio, video and control platform. We focus on customer outcomes and drive growth and productivity to increase market share and deliver superior returns. We look to aggressively deploy capital to grow the business and to enter attractive new verticals. Acuity Inc. is based in Atlanta, Georgia, with operations across North America, Europe and Asia. The Company is powered by approximately 13,000 dedicated and talented associates. Visit us at ****************** Job Summary The Indiana Production Facility (IPF) is Acuity Brands' largest manufacturing site in the USA. The facility is located about 45 minutes west of Indianapolis in the small town of Crawfordsville, Indiana, in the middle of Montgomery County. Love the outdoors as much as we do? Then you'll enjoy the surrounding parks including Turkey Run and Shades State Park or renting canoes at Clements Canoes Outdoor Center. These scenic locations are perfect for boating, fishing, hiking, camping and picnicking. You can also visit a local sporting event at Wabash College or make the short 30-minute drive to DePauw or Purdue Universities for more. The Manufacturing Engineer performs a variety of mechanical and electrical engineering work in the planning and design of products, tools, machines, and manufacturing processes. You will work with other engineering disciplines in the development of new products to increase production quality and efficiency. You will provide production support through the resolution of equipment related issues for purchased or in-house manufactured tooling. Note: This position will work the following schedule, Monday to Friday: 8am - 5pm Relocation assistance available Key Tasks & Responsibilities (Essential Functions) * Responsible for collecting and reviewing production data from production cells to ensure implemented process improvements are sustained. * Identify and support production quality processes and procedures to increase production throughput and eliminate impact to the customer. * Participate, lead, and facilitate kaizen events to improve internal LEAN manufacturing (ABS) processes to increase production's efficiency and quality. * Train production operators on lean principles and manufacturing processes to increase production's efficiency and quality. * Lean Cell Design. * Work with Cross-Functional teams in the planning and designing of new products to ensure their manufacturability. * Research and review industry trends and technological advancements for products and processes. Experience (minimum experience required) * Bachelor's Degree in Mechanical, Electrical or Industrial Engineering or Engineering Technology Degree required * 1 to 5 year's experience in manufacturing would be a plus * Experience and Foundational Knowledge of Lean Principles, Lean Cell Design, and demonstrated ability in continuous improvement * Knowledge of engineering concepts and principles - Design for Manufacturability, Failure Mode and Effects Analysis, Design/Process Control Methods * Proficient Computer and Analytical Skills Physical Requirements * Medium work * Exerting up to 50 pounds of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects * Note: This position spends a substantial amount of time on the manufacturing floor (approximately 50% or greater per day) Travel Requirements * 1-20% #LI-LM1 We value diversity and are an equal opportunity employer. All qualified applicants will be considered for employment without regards to race, color, age, gender, sexual orientation, gender identity and expression, ethnicity or national origin, disability, pregnancy, religion, covered veteran status, protected genetic information, or any other characteristic protected by law. Please click here and here for more information. Accommodation for Applicants with Disabilities: As an equal opportunity employer, Acuity Inc. is committed to providing reasonable accommodations in its application process for qualified individuals with disabilities and disabled veterans. If you have difficulty using our online system due to a disability and need an accommodation, you may contact us at **************. Please clearly indicate what type of accommodation you are requesting and for what requisition. Any unsolicited resumes sent to Acuity Inc. from a third party, such as an Agency recruiter, including unsolicited resumes sent to an Acuity Inc. mailing address, fax machine or email address, directly to Acuity Inc. employees, or to Acuity Inc. resume database will be considered Acuity Inc. property. Acuity Inc. will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume. Acuity Inc. will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. This includes any Agency that is an approved/engaged vendor, but does not have the appropriate approvals to be engaged on a search. E-Verify Participation Poster e-verify.gov eeoc.gov Nearest Major Market: LaFayette Job Segment: Facilities, Machinist, Manufacturing Engineer, Electrical Engineering, Electrical, Operations, Manufacturing, Engineering

Job Title: Electrical Engineer 5 Duration: 24 Months This position will have responsibility for defining and validating high voltage electrical components and systems (50V to over 1000V) and supporting powertrain integration for electrification programs (including diesel-electric, battery-electric, and hybrid machines), from concept through production. This position will be accountable for translating system requirements into appropriate high voltage electrical system designs while ensuring alignment with key safety standards. It will also have accountability for electrical system auditing, troubleshooting, validation, and issue resolution to ensure alignment to safety and regulatory standards and reliability expectations. Job Duties/Responsibilities may include, but are not limited to: Analyzing HV systems for proper protections and arc flash mitigation, using tools like ETAP, Pspice Creating electric powertrain system and sub-system diagrams Ensuring proper overload protection device selection and coordination Defining, integrating, and validating high voltage components in machine powertrain applications Driving requirements definition in support of electrical safety standards (IEEE, NFPA, IEC, ISO, UN) Assisting technical leads in conveying software requirements and component electronic information for HV diagnostics, events, and warnings to the various controls' teams Virtual audits of HV powertrain systems for grounding, bonding, and cable selection / routing Supporting machine commissioning by evaluating compliance with standards, documenting and resolving issues and verifying safe operating procedures Development of HV system design guides, leveraging best practices and lessons from prior machine projects Sizing high voltage cables in powertrain applications Troubleshooting and analysis of field data Educating process partners on the hazards and best practices for working on high voltage electrical systems Key Responsibilities: Perform high-voltage (HV) systems analysis, design, integration, testing, and troubleshooting for diesel-electric, hybrid, and battery-electric applications. Develop and review HV schematics and single-line diagrams; conduct cable sizing, load flow, short circuit, arc flash, and fuse coordination analysis using ETAP or similar tools. Define and cascade requirements aligning with industry standards (e.g., IEC 60204, IEC 61439, IEEE 992) and audit designs for safety, grounding, bonding, and cable routing improvements. Required Skills: Strong experience in HV electrical systems (>600V DC) design, analysis, and integration. Proficiency in system-level tools for load flow, schematics, short circuit, and fuse coordination (ETAP or similar). Excellent collaboration and communication skills for cross-functional teamwork. Preferred Skills: Experience in automotive, EV, industrial power distribution, or switchgear applications. Knowledge of electrical safety and industry standards for HV systems. Hands-on experience with commissioning, troubleshooting, and diagnostics of HV equipment.

**Your Work Shapes the World at Caterpillar Inc.** When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. **Start Your Career with Purpose** Are you ready to apply your engineering education to real-world challenges? Caterpillar's Engineering Rotational Development Program (ERDP) is designed for entry-level professionals like you. Through rotational assignments, you'll continue developing your skills and knowledge-helping you achieve your career goals while contributing to Caterpillar's mission of delivering exceptional products, services, and technologies to our customers. Our Engineering Rotational Development Program is an entry-level program designed to build employees' skill sets within the discipline and continue growth, even after the successful completion of the program. This 12 to 18-month program provides practical experience across multiple engineering teams and technologies. It's more than just a job, it's a launchpad for your future at one of the world's leading manufacturers of construction and mining equipment. **What the Program Offers** As part of the ERDP, you'll rotate through different teams and projects that match your skills, knowledge, and abilities. You'll work on meaningful projects, connect with mentors, and get exposure to various areas of the company. Here are just a few paths you might explore: + **Product Design:** Design components and systems for Caterpillar products to meet customer needs. Collaborate with cross-functional teams throughout the value chain-from concept to production-to deliver effective solutions. + **Simulation/Performance Analysis:** CFD [Computational Fluid Dynamics] (ANSYS), FEA [Finite Element Analysis], 3D modelling, autonomy sensor and photorealistic environment root cause investigation, system/subsystem/component design optimization, structural dynamics, development and optimization of engine, aftertreatment, battery, fuel cell, powertrain, machine system performance, and/or autonomy and multiple machine coordination. + **Test/Validation/Hands-on:** Apply strong mechanical engineering understanding in a test/validation (hands-on) environment, troubleshooting issues, and collaborating with others for optimal results. + **Controls Development:** Develop/implement control system algorithms using Matlab/Simulink for various control systems including, but not limited to, engine controllers, machine implement controllers, as well as powertrain controllers. Will be responsible for understanding the feature requirement, implementing it, as well as testing it prior to a production rollout. + **Electronic Components:** Will be responsible for designing and testing various electronic control modules, as well as various electronic components. Will work with various internal Caterpillar clients to understand controller/component requirements, help design PCB [Printed Circuit Board] layouts, as well as perform digital/analog/power circuit analysis and testing. Other duties may include working with suppliers, testing the controllers/components in various environments, ensuring that FMEAs [Failure Mode and Effects Analysis] are conducted and documented to meet stringent Caterpillar quality requirements. + **Embedded Software Development:** Develop embedded software in C, C#, and/or C++ for various electronic control modules. Some examples of embedded software development applications include Datalink communications, inputs and outputs (sensors and actuators), speed calculation, injection/spark timing, memory management, CPU optimization, multi-core design and implementation, autonomy algorithms for perception, localization, planning, etc. In addition, some areas of work include developing scripts in Python/Visual Basic for automation. + **Software Validation/Verification for Electronic Systems:** Verify functionality of a feature or control system algorithm on a HIL [Hardware in the Loop] simulator bench or a SIL [Software in the Loop] system. Understand the requirements of the feature and/or the schematics of the controller/control system, verify functionality and debug/report anomalies to the development team, and help validate fixes. + **Engineering Data Analytics:** Ability to write and understand computer code, Python, analytics/data science experience, exposure to machine learning concepts/tools, engineering and statistics fundamentals. + **Process Engineering:** Apply mechanical, manufacturing, systems and/or industrial engineering knowledge to analyze and optimize an engineering process or processes. Will have the opportunity to leverage problem-solving and communication skills. **What You Have - Skills and Experiences** In this role, you will have the opportunity to contribute your unique skills and experiences. Below are some of the most critical skills: + Analytical skills, initiating ideas, troubleshooting, root cause analysis, problem-solving, and critical thinking capabilities + Knowledge of engineering principles, theory, and engineering experience gained through projects, internships, and/or relevant work experience + Fundamental understanding of engineering for a manufacturing environment and the ability to design and implement materials, structures, machines, devices, systems, and processes that safely realize a desired objective or invention + Ability to manage multiple projects simultaneously and quickly acquire and apply new skills and knowledge + Collaborate with others of diverse cultures, interpersonal styles, and abilities + Strong written and verbal communication skills + Participate in and build on our inclusive, constructive, and productive work environment + Ensure all team members' contributions are recognized and valued + This position requires 12 months or less of professional experience in this field (excluding internships) **Program Qualifications** + ABET-accredited Bachelor's or Master's degree in Mechanical, Electrical, Computer, Agricultural, or Aerospace Engineering; Engineering Technology; or a related technical discipline (selected candidates must obtain their degree before they start) + Minimum cumulative GPA of 3.0/4.0 or higher (unrounded) + Willing to relocate and travel as needed **Top Candidates May Also Have** + Involvement with a campus design/competition team or related experience + Project or team leadership experience + Previous technical internship/co-op or relevant experience + Excellent interpersonal and communication skills + Intellectual curiosity, adaptability, and a willingness to learn by doing **Additional Information** + Please attach your resume and an unofficial copy of your transcript to your application + Applicants will be considered for positions throughout the United States + Most positions are based in **Peoria, Illinois** , with limited availability in other United States' locations + This is a **Monday through Friday, in-person opportunity** -perfect for building relationships, learning fast, and diving deep into your rotations + Sponsorship is **NOT** available for this position + Relocation is available to those who qualify + **2026 available start dates** - February 2, 2026; June 1, 2026; July 13, 2026; and August 3, 2026 (seats are limited for each start date) **Why Choose Caterpillar?** We're a values-driven company where you'll feel your work matters-whether you're optimizing machine performance, writing embedded code, or designing the next innovation in clean energy. You'll gain access to top-tier mentorship, technical resources, and real ownership of your work from day one. **Final Details** Please regularly check the email associated with your application-including your junk/spam folder-as this will be our primary method of communication. To check the status of your application, please visit our career website using the candidate login, as it will reflect any updates to your status. Interested applicants should explore our direct hire positions at ******************************* . For more information, visit caterpillar.com. To connect with us on social media, visit caterpillar.com/social-media. **Summary Pay Range:** $79,800.00 - $143,520.00 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. **Benefits:** Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. + Medical, dental, and vision benefits* + Paid time off plan (Vacation, Holidays, Volunteer, etc.)* + 401(k) savings plans* + Health Savings Account (HSA)* + Flexible Spending Accounts (FSAs)* + Health Lifestyle Programs* + Employee Assistance Program* + Voluntary Benefits and Employee Discounts* + Career Development* + Incentive bonus* + Disability benefits + Life Insurance + Parental leave + Adoption benefits + Tuition Reimbursement * These benefits also apply to part-time employees This position requires working onsite five days a week. Relocation is available for this position. Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at **************************** **Posting Dates:** August 22, 2025 - December 30, 2025 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community (*********************************************** .

RTI Surgical is now Evergen! This rebranding reflects our strategic evolution as a leading CDMO in regenerative medicine and comes at the end of a significant year for the business, including the successful acquisitions of Cook Biotech in IN. and Collagen Solutions, MN. Our new brand identity emphasizes our unique positioning as the only CDMO offering a comprehensive portfolio of allograft and xenograft biomaterials at scale. Evergen is a global industry-leading contract development and manufacturing organization (CDMO) in regenerative medicine. As the only regenerative medicine company that offers a differentiated portfolio of allograft and xenograft biomaterials at scale, Evergen is headquartered in Alachua, FL, and has manufacturing facilities in West Lafayette, IN., Eden Prairie and Glencoe, MN., Neunkirchen, DE., Glasgow, UK., and Marton, NZ. Read more about this change and Evergen's commitment to advancing regenerative medicine here: ************************ RESPONSIBILITIES Leads project workstreams in the design and development of new devices and improvements to existing designs leveraging previous experience with minimal support to derive unique solutions and approaches to drive project success Applies sound engineering problem-solving techniques to resolve challenges during the product development process and analyzes data to draw conclusions using statistically sound and scientifically-based methodology Leverages experience and technical knowledge to proactively develop strategies and plans of execution to derive unique solutions and approaches to contribute to project success Writes protocols, reports, Standard Operating Procedures (SOPs), and other technical documents in accordance with Good Documentation Practices with a high attention to detail. Applies principles of ISO 13485 and ISO 14971 Designs, develops, and validates test methods to meet design requirements. Effectively leads discussions and builds consensus with quality, regulatory, engineering, and production teams throughout the product development process to meet project objectives Leads discussions with internal or external customers to obtain design requirements and feedback on prototype designs with a high level of customer service Maintains project timelines by providing appropriate inputs, target times, and resource needs Applies clinical knowledge in relevant surgical procedures and disease states within a clinical segment to develop innovative solutions to satisfy customer needs Evaluates product design for manufacturability and suggests design process adjustments and quality improvements Participates in the selection, development, and testing of tools, fixtures, machinery, and equipment used in manufacturing Other duties as assigned REQUIREMENTS Education Bachelor's of Science Degree in Biomedical Engineering or another relevant engineering discipline. Experience 4 to 6 years of engineering experience designing or modifying medical devices or implants. Certification N/A Skills Excellent verbal and written communication skills Effective negotiation skills Competency in Enterprise Resource Planning (ERP) software Computer program expertise and knowledge of Microsoft Suite, especially Excel Continuous Improvement methodologies Travel 10% or less SAFETY Physical Requirement Move or lift objects up to 25 pounds Frequent (>75%) stationary position (standing or sitting) while utilizing digital displays Frequent (>75%) fine manipulation using hands and fingers (typing, opening, writing, clicking, paper sorting, etc.) Working Environment Onsite: Office environment with assigned workstation Remote positions only: Home office environment with minimum distractions. More about Evergen: Evergen provides customers across a diverse set of market segments with leading-edge expertise, scale, and flexibility across end-to-end services including design, development, regulatory support, verification and validation, manufacturing, and supply chain management. Evergen is rooted in a steadfast commitment to quality, integrity, and patient safety with a focus on five key values: Accountable: We own our actions and decisions. Agile: We embrace change to stay ahead of the curve and evolve to drive innovation and growth. Growth Mindset: We embrace challenges as opportunities for continuous learning. Customer-Centric: We prioritize customers at every touch point. Inclusive: We thrive on the richness of our diversity and ensure every voice is heard, respected, and celebrated. At Evergen, we are committed to fostering an inclusive workplace where we embrace the richness of our diversity and ensure that every voice is heard, respected, and celebrated. We believe that by embracing diversity and promoting inclusivity, we not only uphold our values but also strengthen our position as the CDMO of Choice in regenerative medicine solutions. We recognize that cultivating a growth mindset is essential to our success, and we are dedicated to continuous learning and improvement in our diversity, equity, and inclusion efforts. Through accountability and action, we strive to create an environment where individuals can thrive, innovate, and contribute their unique perspectives to drive our collective success. Montagu Private Equity (“Montagu”), a leading European private equity firm, acquired RTI in 2020 and has supported the transformation of the company to its next level of potential. #LI-Onsite