Staff engineer jobs in Louisiana - 964 jobs

About the Job The Hardware Exploitation Engineer will support the DC3 program and will be primarily responsible for performing thorough examinations of digital media, including hard drives, flash drives, cell phones, and other electronic devices that may hold critical data. Location NDOC, Bethesda, MD Full-time onsite/no telework The Work You'll Do We are seeking a Hardware Exploitation Engineer with a strong commitment to teamwork to join our team at the National Digital Exploitation & OSINT Center (NDOC) in Bethesda, MD. In this role, you will be responsible for performing thorough examinations of digital media, including hard drives, flash drives, cell phones, and other electronic devices that may hold critical data. Responsibilities include, but are not limited to: * Perform technical hardware exploitation and thorough examination of a variety of digital storage devices. * Conduct reverse engineering, failure analysis, vulnerability analysis, and other research techniques to understand complex hardware systems, assess the functionality of components, and identify exploitation opportunities. * Alter hardware components to facilitate forensic analysis of the media or to adjust the functionality of the hardware to meet specific objectives. * Perform inspection, imaging, decapsulation, de-processing, and other activities related to hardware reverse engineering and exploitation in a state-of-the-art microelectronics exploitation laboratory. * Develop and maintain frameworks, processes, design patterns, techniques, tools, and standards for conducting hardware exploitation of digital media. * Serve as a subject matter expert for IC/DoW customers. * Prepare clear and concise technical reports to a wide range of audiences What You'll Bring * Bachelor's degree and 8+ years of experience, or Master's Degree and 6+ years of experience, or 3+ years with PhD. Bachelor's degree should be in one of these fields: Information Technology, Cybersecurity, Computer Science, Information Systems, Data Science, Mathematics, or Software Engineering. * Active TS/SCI with Poly Clearance required to start. * Solid understanding of programming languages such as C/C++, Python, VHDL/Verilog, MATLAB, Assembly language, etc. * Experience with Operating Systems: Windows, Linux, iOS, Android, Embedded Linux, RTOS, etc. * Knowledge of communication protocols (e.g., I2C, SPI, JTAG, UART, Wi-Fi, BT/BLE, TCP/IP, CAN) to interface with and extract data from electronic components. * Advanced troubleshooting skills to effectively diagnose, isolate, and resolve complex failures in circuit boards: power integrity, thermal imaging, component-level analysis, etc. * Proficiency in debugging techniques using tools like oscilloscopes, logic analyzers, protocol analyzers, and other hardware debuggers. * Working experience in Microprocessors/Architectures: ARM, MIPS, x86, PIC, RISC, PowerPC. * Proficiency in soldering and desoldering components to access memory chips and other critical hardware for data extraction. * Experience writing Technical Reports to create detailed documentation of findings. Preferred * Familiarity with Integrated Development Environments (IDEs) for circuit design and simulation, such as MATLAB/Simulink, Altium Designer, KiCad, Proteus, and similar tools. * Experience requiring skills in reverse engineering of embedded systems with proprietary operating systems for the purpose of introducing functionally to a fielded system. * Experience with static analysis tools such as IDA Pro, Ghidra and Binary Ninja. * Active Security+ (or equivalent IAT Level II or III) Certification desired. Salary Range: $120,000 - $140,000 Our Approach At SecureStrux, we are committed to core values that guide the way we work with one another and our clients. As a team member, you will Create Team Synergy, Drive Continuous Innovation, Deliver with Integrity, and have the Freedom to Own it. Our thriving company culture supports our employees as they seek to grow with us! What We Offer Between our virtual environment where you can evaluate recent technologies and enhance your skills, and a generous annual professional development stipend, you will join a team that enjoys working on leading-edge technologies for world-class clients. We offer a robust total compensation package that includes comprehensive health benefits to support you and your family, flexible time off, continuing education allowance, a donation allowance for charitable causes, and a matched 401k.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning 12,000 strong organization as we fuel the world and each other! Note: This position is based in Shreveport, La. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * As an operations engineer, this position will support multiple Cryogenic plants, treating facilities, and compressor stations located throughout NW Louisiana and East Texas. * Work with plant and system operations personnel (daily) to help improve plant operations (troubleshooting). * Manage and execute plant improvement and upgrade projects including scope, design, development, cost estimate, cost forecast, material procurement, construction, and project completion. * Successfully manage $10 MM plant projects with minimal supervision. * Communicate with company operations personnel and contractors for project implementation. * Take part in PSM activities for area facilities. (Help maintain facility drawings, resolve PHA action items, etc.) * Develop process solutions while following engineering standards, code compliance, proper company and safety standards, and good engineering practices. * Proactively seek opportunities to broaden and deepen process engineering knowledge base and proficiencies. Requirements: Education and/or Experience, Knowledge, Skills & Abilities: * Bachelor of Science, Chemical or Mechanical Engineer * 10 years industry experience Software Knowledge: * Microsoft Products * Engineering Programs * WinFlow * ProMax Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Lifting up to 50 lbs occasionally. * Driving, walking, standing frequently. * Exposure to adverse weather, cramped conditions and some heavy lifting * Visits to industrial/manufacturing settings, which may include exposure to various materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment. * Occasional overnight travel may be required.

Rubicon is seeking a Sr. I&E Engineer supporting the Polyurethanes Division located in Geismar. In summary, as the Sr. I&E Engineer, you will: Has the responsibility for managing an effective maintenance program on all electrical and instrumentation equipment on site. • Serve as subject matter expert to electricians and/or instrument technicians to result in quality repairs. a) Assure adherence to Rubicon Maintenance Policies & Procedures, and industry “best practices” (e.g., NFPA, ISA, IEC, NETA) for all equipment repairs. b) Retain knowledge of site control systems (e.g., DCS, PLC, Communications, Fire Protection, Vibration Monitoring). c) Maintain electrical system coordination study and initiate corrective action (e.g., ETAP). d) Ensure effective training for electricians and instrument technicians. • Responsible for leading E&I maintenance activities and monitoring costs. • Responsible for developing electrical safe work practices for site electrical and instrument workers. • Monitors Preventive Maintenance activities on all electrical and instrumentation equipment. a) Manage 5-year preventative maintenance program for electrical distribution systems. b) Recommend instrumentation equipment to resolve reliability issues. c) Identify and propose projects for the site capital program to improve equipment reliability and/or reduce maintenance expenses. • Assures proper spare parts inventory for all electrical and instrumentation equipment. • Ensure site process safety by consistent repairs of electrical and instrumentation equipment. • Perform troubleshooting of electrical and instrumentation equipment to return systems to normal operating functions. • Serve as a subject matter expert in the maintenance of electrical and instrumentation procedures. • Provide input as need for electrical and instrumentation modifications made to the site. • Monitor updates to equipment files in all software suites and take appropriate action as needed. • Works with the safety department on root cause of incidents relating to the electrical and instrumentation equipment. Qualifications You must possess the below minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus. The candidate must have an unrestricted right to work for Rubicon in the United States. Minimum Qualifications Minimum of 5 years of experience in industry B.S. in Electrical Engineering Know How: Leadership ability with people skills and an ability to communicate clearly. High mechanical aptitude accompanied by a comprehensive knowledge of electrical and instrumentation equipment, materials of construction, chemicals, and processes common to Rubicon. Working knowledge of Rubicon maintenance and safety policies/procedures and Rubicon General Specifications. Working knowledge of Rubicon's software business system and equipment databases. Ability to read, understand, and interpret P&ID, electrical one-lines, and instrument drawings. Thorough knowledge of installation, troubleshooting, maintenance and repair procedures for all types of electrical and instrumentation equipment. Maintain familiarity with various equipment manufacturers, their technical support staff, and vendors so that they may be quickly contacted at any time that their assistance is required. Rubicon is proud to be an equal opportunity workplace. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, national origin, disability, age, or any other protected characteristic. All unsolicited resumes presented by recruitment agencies are treated as pro bono information or service and will not be compensated. Rubicon is aware of scams involving fraudulent job offers. We do not make job offers until after a candidate has submitted a job application and has participated in an interview. Please be advised that any job offer that requires payment or requires you to deposit a check is likely a scam. If you have questions about any open positions at Rubicon, please visit our Careers website at ************************* Additional Locations:

At General Motors, we are building on our long-standing legacy of innovation and leadership in advanced driving technologies, exemplified by our industry-leading hands-off driving system, Super Cruise . Our Autonomous Vehicles (AV) program is driven by a bold ambition to deliver expanded product portfolios that push the boundaries of safe, reliable autonomous and assisted driving experiences. Central to this mission is our Architecture and System Design team, a critical hub that operates at the intersection of requirement definition, architecture and system design, integration, and validation across the AV organization. This team ensures a cohesive and robust system architecture that enables seamless integration of our AV technologies and delivers the high standards of safety and performance our customers expect. We are seeking an experienced **Staff Systems Engineer** to lead systems engineering efforts for our embedded AV/ADAS platform. You will be responsible for defining and managing system-level requirements and architectures, optimizing resource allocation across computational and networking subsystems, and working closely with software and hardware teams to ensure seamless integration of vehicle platform components. This role is highly collaborative, strategic, and technical, influencing platform roadmaps and long-term technical direction. Key Responsibilities + Lead the end-to-end systems engineering for embedded autonomous vehicle (AV) and advanced driver-assistance systems (ADAS) platforms. + Define, document, and manage system-level requirements, ensuring traceability and alignment with product and safety goals. + Develop and maintain system architecture, balancing trade-offs in compute resources (CPU, GPU, NPU), memory (RAM), and communication bandwidth (Ethernet). + Perform system resource allocation, profiling, and optimization to meet performance, power, latency, and reliability targets. + Collaborate cross-functionally with software architecture, firmware, hardware, validation, and vehicle integration teams to ensure cohesive system design and implementation. + Drive technical roadmap planning and contribute to strategic decisions on future platform capabilities and scalability. + Identify risks and develop mitigation strategies related to system integration and performance. + Mentor junior engineers and foster a culture of technical excellence and innovation within the team. Required Qualifications + Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, Systems Engineering, or a related technical discipline. Master's or PhD preferred. + Minimum 8+ years of systems engineering experience, ideally within embedded systems, automotive, robotics, or related industries. + Proven track record of leading system architecture design and resource allocation for complex embedded platforms. + Deep understanding of AV/ADAS domain including embedded computing platforms, sensor integration, and real-time constraints. + Strong expertise in system performance analysis and optimization, including CPU/GPU/NPU architectures, memory hierarchies, and network bandwidth management. + Experience with platform systems engineering: device power management, I/O, internal & external communication + Experience with edge compute SoC and MCU architectures. + Hands-on experience with system modeling, simulation tools, and requirements management frameworks. + Experience working with Ethernet-based automotive networks (e.g., Automotive Ethernet, TSN). + Familiarity with safety standards and practices (ISO 26262, ASPICE) is a plus. + Excellent communication skills and demonstrated ability to work effectively in cross-disciplinary teams. + Proven ability to navigate and solve problems characterized by high ambiguity Preferred Qualifications + Advanced degree (MS or PhD) with a focus on embedded systems, systems engineering, or related fields. + Experience with embedded Linux or RTOS environments in automotive or robotics applications. + Knowledge of AV software stacks, middleware, and sensor data processing pipelines. + Familiarity with system-level debugging, profiling, and telemetry tools. + Prior experience at a leading AV company or tier 1 automotive supplier. + Strong leadership skills with experience mentoring engineers and leading technical projects. + Understanding of power management and thermal constraints in embedded platforms. + Experience contributing to strategic technical roadmaps and platform evolution. **Hybrid:** This role is categorized as hybrid. This means the successful candidate is expected to report to the Warren Technical Center in Warren, MI OR the Sunnyvale Technical Center in Sunnyvale, CA three times per week, at minimum. **Remote:** This role is based remotely but if you live within a 50-mile radius of [Atlanta, Austin, Detroit, Warren, Milford, Sunnyvale or Mountain View], you are expected to report to that location three times per week, at minimum. **Compensation** **:** The compensation information is a good faith estimate only. It is based on what a successful applicant might be paid in accordance with applicable state laws. The compensation may not be representative for positions located outside of New York, Colorado, California, or Washington. + The salary range for this role is $157,100 and $258,500. The actual base salary a successful candidate will be offered within this range will vary based on factors relevant to the position. + Bonus Potential: An incentivepayprogram offers payouts based on company performance, job level, and individual performance. **Benefits:** GM offers a variety of health and wellbeing benefit programs. Benefit options include medical, dental, vision, Health Savings Account, Flexible Spending Accounts, retirement savings plan, sickness and accident benefits, life insurance, paid vacation & holidays, tuition assistance programs, employee assistance program, GM vehicle discounts and more. **Company Vehicle:** Upon successful completion of a motor vehicle report review, you will be eligible to participate in a company vehicle evaluation program, through which you will be assigned a General Motors vehicle to drive and evaluate. Note: program participants are required to purchase/lease a qualifying GM vehicle every four years unless one of a limited number of exceptions applies." This role is based remotely, but if the selected candidate lives within a specific mile radius of a GM hub, they will be expected to report to the location three times a week {or other frequency dictated by your manager}. **About GM** Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. **Why Join Us** We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. **Benefits Overview** From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources (************************************************************* . **Non-Discrimination and Equal Employment Opportunities (U.S.)** General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire (********************************************* . **Accommodations** General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email (Careers.Accommodations@GM.com) us or call us at ************. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. We are leading the change to make our world better, safer and more equitable for all through our actions and how we behave. Learn more about: **Our Company (************************************************** **Our Culture** **How we hire (************************************************ Our diverse team of employees bring their collective passion for engineering, technology and design to deliver on our vision of a world with Zero Crashes, Zero Emissions and Zero Congestion. We are looking for adventure-seekers and imaginative thought leaders to help us transform mobility. Explore our global locations (******************************************** We are determined to lead change for the world through technology, ingenuity and harnessing the creativity of our diverse team. Join us to help lead the change that will make our world better, safer and more equitable for all by becoming a member of GM's Talent Community (beamery.com) (*********************************************** . As a part of our Talent Community, you will receive updates about GM, open roles, career insights and more. Please note that filling out the form below will not add you to our Talent Community automatically; you will need to use the link above. If you are seeking to apply to a specific role, we encourage you to click "Apply Now" on the job posting of interest. The policy of General Motors is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, General Motors is committed to being an Equal Employment Opportunity Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at Careers.Accommodations@GM.com .In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

GARNEY CONSTRUCTION A Project Engineer position is available in Monroe, LA. This position will act as the backbone of the project management team and keep the job on track. Great attention to detail and the ability to organize and plan will ensure success in this position. WHAT YOU WILL BE DOING You will assist the project management team with tasks such as negotiating and purchasing materials, maintaining documents, and acting as a point of contact with owners, architects, and engineers. Responsibilities: * Create Submittals and RFI's. * Coordinate projects from start to finish. * Assist with estimating. * Project setup & closeout. * support field operations. * maintain detailed job costs. * Work professionally with owners and engineers. * Assist in scheduling projects and crews. WHAT WE ARE LOOKING FOR The ideal candidate will have a degree in civil engineering, construction management, or another related field and is willing to travel and work the days and hours required to ensure the project's success. This position is perfect for someone seeking entry-level project management experience with an industry leader. LET'S TALK THE PERKS! * Employee Stock Ownership Plan (ESOP) & 401K Retirement Plan. * Health, Dental, Vision, and Life Insurance. * Health Savings Account (HSA) / Flexible Spending Account (FSA). * Long-term Disability, Wellness Program & Employee Assistance Plans. * Paid Holidays & Vacations CONTACT US If you are interested in this Project Engineer position in Monroe, LA then please APPLY NOW. For other opportunities available at Garney Construction go to careers.garney.com. If you have questions about the position or would like more information, please contact Brooke Egan by email at ********************** THE BENEFITS OF WORKING AT GARNEY Free medical, prescription, dental, and vision plans ($0 premiums) Virtual doctor visits with no co-pay Shares of company stock at no cost starting your first day 401(k) plan with a 3.5% match Student loan resources Weekly paychecks Paid time off 8 paid holidays Health Savings Account (HSA) with a lump sum and matching contributions Free life insurance & disability policy Free access to healthcare coordinators Counseling sessions with mental health professionals at no cost Access to consultations with legal/financial professionals at no cost Free programs assisting with weight loss, maternity health, prescriptions for chronic conditions, and more 50% employee discount in the Garney apparel store BUILDING SUSTAINABLE FUTURES WITH THE WORLD'S MOST PRECIOUS RESOURCES-WATER AND PEOPLE. EEO - it's the law poster Right to work This organization participates in E-verify Nearest Major Market: Monroe

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company's Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global's modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. We are seeking a Staff Engineer, Production to join our Integrated Production Excellence team. This position will be located in Cameron, LA with frequent travel to Arlington, Virginia. This role reports to the SVP, Integrated Production Excellence and will be responsible for optimizing the Availability and Performance of the Calcasieu Pass (CP) Facility LNG Liquefaction Trains and will support the overall CP Facility Production System Optimization efforts. Responsibilities: Set CP Facility LNG Trains Production daily targets, define operating limits and engage with Operations, Maintenance and Engineering to develop the Production Plan for the day Build and maintain Real time, online, surveillance and monitoring models to optimize the Availability and Performance of the CP Facility LNG Liquefaction Trains Perform Analysis to detect deviations from Live Operating Envelope Limits and identify the actions required to safely and reliably maximize LNG rundown Identify short-, medium- and long-term Availability and Reliability improvement initiatives to maximize LNG rundown using insights from Real time System and Physics-based/data-driven models Identify Production risks that could impact Availability and Reliability and develop mitigation plans to address them Provide input to the weekly and monthly Production reviews and follow up on any actions required to improve the performance of the CP Facility LNG Trains Identify the CP Facility LNG Trains production loss events and engage with the relevant stakeholders (including but not limited to Engineering, Maintenance, Operations) to review, validate, report and manage production losses in a timely manner to maximize Availability and Reliability Lead or be part of EIRs (Engineering Investigation Requests) and MoCs (Management of Change) required to improve the CP Facility LNG Trains performance Lead or be part of the CP Facility LNG Trains Production loss RCAs when required Gather the required assumptions on LNG Trains performance and provide timely input to the Forecast and Annual Delivery Plan process Support the Long-Term Service Agreement (LTSA) process and provide all the required input and analysis as required Support the development of Integrated Production Excellence standards and procedures Capture Lessons Learned from the CP Facility and provide input to other Venture Global LNG projects / sites as required Qualifications: Education and Certifications: Bachelor's degree in Chemical/Process Engineering is required Experience: Minimum 5-10 years' experience working as a Production Engineer with a demonstrated track record of Production performance improvement Oil and Gas experience is required, with a strong preference in LNG applications; however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience will be considered. Working knowledge of key equipment involved in LNG liquefaction facilities Experience in all aspects of process engineering from conceptual design, economics, detailed engineering, and plant startup and troubleshooting Commissioning, start-up and performance testing at project sites is a plus Travel to Arlington, VA as needed Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. #LI-Onsite

JD Mechanical Equipment, LLC is a HVAC manufacturers' representative firm that represents some of the top HVAC manufacturers in the industry for North Louisiana. The company specializes in both standard and custom HVAC applications, priding itself on providing industry leading customer service. From basic commercial office space to complex healthcare and lab applications, JD Mechanical Equipment carries HVAC products and equipment to fit the specific application. Reports to: Account Executive or Sales Leader FLSA Status: Exempt The Opportunity This is an entry-level role learning all aspects of JD Mechanical products and systems to estimate and manage projects. As the Project Engineer, this individual will be responsible for coordinating submittals, equipment selection, pricing and ship dates for each project. Must be detail and customer service oriented and have excellent organizational skills. Position requires a high level of oral and written correspondence with the Sales Team, Customers and Manufacturers to ensure timely completion of assigned projects while maintaining customer satisfaction. Must be able to work well with others in a fast-paced & high-volume environment. Responsibilities Create and maintain job files for each project throughout its duration Optimize the project through the stages of product selection, specifications, plans, estimates, proposals, value engineering and redesigns Manage multiple projects on an ongoing basis Communicate with owners, architects, MEP Consultants and General, Mechanical and Electrical Contractors Organize project related data for order entry Respond to and track IOM & Submittal requests Read, understand and interpret building plans & specifications Develop and grow relationships with customers, contractors, project engineers and manufacturers Determine project requirements, constraints, and sales team responsibilities to meet all of the customer's system design, installation and maintenance expectations Investigate concerns, implement corrective action and communicate with customers and co-workers as necessary to maximize customer satisfaction The Required Profile Bachelor's degree in engineering Working knowledge of MEP consulting, architecture, design, CAD, general contracting, mechanical contracting, engineering or construction industry a plus Ability to prioritize, multi-task, deal with ambiguity and manage high volume projects Strong PC skills in Microsoft Office applications including Word, Excel, PowerPoint, and Outlook Other Skills/Abilities Strategic Skills Ability to learn new skills and knowledge. Ability to understand concepts and complexity comfortably. Open to change and will try anything to find solutions. Able to handle uncertainty and make decisions without knowing the whole story Operating Skills Ability to discern between tasks to determine how best to accomplish goals and organize task/people assignments to get results in a timely way. Ability to figure out processes and simplify them in order to maximize work flow. Behavior Skills Ability to manage people and situations when conflicts arise. Ability to seize opportunities with the drive to complete goals. Personal and Interpersonal Skills Ability to establish and grow relationships with customers through effective verbal and written communication. Dedicated to the needs of the customers, manufacturers and peers and has the patience to actively listen to all business partners. Able to solve problems and skillfully negotiate with a minimum of noise while managing stress. Demonstrates integrity and trust through appropriate directness and truthfulness. Ability to understand personal strengths and weaknesses, seek feedback and improve upon shortcomings. Environmental Requirements Will be required to work in an office environment and frequently in the field. Physical Demands While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard and telephone, reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship. Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.

Do you have a passion for leveraging data, analytics, and AI to drive meaningful change? At GE Aerospace, we are transforming supply chain processes to address one of our most critical business challenges: delivery. As a Staff Enterprise Application Engineer specializing in Palantir, you will utilize your expertise in Palantir Foundry and AWS cloud technologies to design, deploy, and tailor solutions for complex aerospace challenges. In this role, you will build and maintain Foundry pipelines, modular applications, and workflows, while working closely with stakeholders to create cutting-edge solutions using ontology, advanced analytics, and AI. **** **Roles and Responsibilities** + Architect and design sound/supportable technical solutions to complex business requirements + Develop and maintain Foundry pipelines using Pipeline Builder to ingest, transform, and integrate data. + Build modular applications and workflows leveraging Python, and Foundry AIP. + Collaborate with data engineers, analysts, and stakeholders to refine data models and ontology mapping. + Assist in Foundry workshops to guide stakeholders through platform capabilities. + Support testing, debugging, and performance tuning of Foundry applications. + Work with aerospace data to identify patterns, trends, and insights using Palantir Foundry and AWS analytical tools. + Develop custom applications and workflows within Foundry and AWS to address specific challenges. + Ensure data integrity and compliance with aerospace industry standards. + Apply lean methodologies to identify opportunities for process improvement. + Share feedback with Palantir and AWS product teams to enhance tools and workflows. + Provide technical coaching and direction to more junior teammates. **Technical Qualifications** + Strong experience in Python, PySpark, and front-end frameworks like React, Angular, or Vue.js. + Experience with Pipeline Builder, AIP, and Foundry's application development ecosystem. + Proficiency in AWS cloud services such as EC2, S3, Lambda, RDS, and CloudFormation. + Experience with Git-based code repositories and CI/CD workflows. **Minimum Qualifications** + Bachelor's degree from accredited university or college with minimum of 4 years of professional experience OR associate's degree with minimum of 7 years of professional experience OR High School Diploma with minimum of 9 years of professional experience + Minimum 3 years of professional experience in Computer Science or "STEM" Majors (Science, Technology, Engineering and Math) + **Note:** Military experience is equivalent to professional experience The base pay range for this position is $110,700- $184,600. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on October 31, 2025. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs ( _i.e_ ., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. **Eligibility Requirement:** + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job. **Desired Characteristics** + Ability to operate in an ambiguous environment as we establish this transformation program and define roles & responsibilities. + Demonstrated ability to quickly understand new concepts and analyze system deficiencies + Passionate about security and the quality of the applications they support + Organized, thorough, and detail oriented + Collaborates well with others to solve problems and actively incorporates input from various sources + Eager to learn, shares ideas, encourages and accepts feedback well + Strong analytical skills - strong problem-solving skills, communicates in a clear and succinct manner and effectively evaluates information / data to make decisions; anticipates obstacles and develops plans to resolve + Demonstrated customer focus - evaluates decisions through the eyes of the customer; builds strong customer relationships and creates processes from the customer's viewpoint + Experience working with an offshore development team + High level of energy and enthusiasm, with the ability to thrive in a dynamic, fast-paced setting + Comfortable with empowering colleagues and inspiring others to be their best **Note:** To comply with US immigration and other legal requirements, it is necessary to specify the minimum number of years' experience required for any role based within the USA. For roles outside of the USA, to ensure compliance with applicable legislation, the JDs should focus on the substantive level of experience required for the role and a minimum number of years should NOT be used. This Job Description is intended to provide a high-level guide to the role. However, it is not intended to amend or otherwise restrict/expand the duties required from each individual employee as set out in their respective employment contract and/or as otherwise agreed between an employee and their manager. **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Job DescriptionSalary: EIS is seeking a Fixed Equipment Engineer with strong experience in large static equipment, including pressure vessels, piping systems, exchangers, and heaters. The ideal candidate will have previous experience as a Mechanical Engineer in a refinery or chemical plant, along with knowledge of reliability and maintenance strategies for fixed equipment. This role is responsible for supporting plant reliability, maintenance programs, and ensuring compliance with industry standards and client requirements. Key Responsibilities: Assist in formulating, implementing, maintaining, and auditing Preventive Maintenance (PM) and Predictive Maintenance (PdM) programs. Collaborate with Maintenance and Inspection teams to troubleshoot mechanical issues with pressure vessels, storage tanks, and piping systems. Provide engineering expertise and maintenance strategies to optimize equipment availability, reliability, and cost efficiency. Maintain and improve plant reliability by identifying and correcting operational reliability opportunities. Develop and update equipment strategies in alignment with client needs and industry standards. Establish and monitor programs for critical equipment analysis and condition monitoring techniques. Perform and review thickness calculations per API 510, API 570, and API 579 Fitness for Service. Required Skills & Abilities: Proficiency in MS Excel, MS Word, and related engineering software. Strong interpersonal and communication skills, with the ability to provide internal consulting and deliver technical presentations. Effective analytical and problem-solving skills with the ability to make sound recommendations. Ability to wear and properly utilize personal protective equipment (PPE), including hardhat, safety glasses, respirators, ear plugs, and steel-toed shoes. Education & Experience: Bachelor of Science degree in Mechanical Engineering required. 13 years of experience as a Mechanical Engineer or in a related functional area. Hands-on experience with large static equipment (vessels, pipes, exchangers, heaters, etc.) required. Knowledge of ASME and API codes (510, 570, 579, etc.) required. Experience with Predictive and Preventive Maintenance Programs preferred. Strong results-driven mindset with critical thinking and problem-solving ability. Must be in good standing with DISA and hold a valid TWIC card. Physical Requirements: Ability to stand, walk, climb ladders/stairs, and work at heights. Ability to enter confined spaces (with proper training/permits). Lift and carry up to 2550 pounds occasionally. Normal hearing and vision (close, distance, depth perception, focus). Must wear required PPE: hardhat, safety glasses, FRC, gloves, steel-toed boots, hearing and respiratory protection as needed. Working Conditions: Work performed in both office and plant/field environments. Exposure to outdoor weather, loud noise, fumes, chemicals, and moving equipment. May require extended hours, nights, weekends, or holidays during Turnarounds or outages. Travel to client sites may be required. Must comply with all site safety rules and medical/PPE requirements (e.g., TWIC, DISA, fit testing). About Us: Engineering & Inspection Services (EIS) is a multidisciplinary engineering firm offering Engineering & Design, Field Services, Inspection & Mechanical Integrity, and Technology Development. Founded by engineers, EIS has placed engineering at the core of our business since 2000. Our clients in the petrochemistry industry rely on us to exceed their expectations in safety, efficiency, reliability, and sustainability. At EIS, we bring knowledge, experience, and integrity to every project. With team members across the Gulf South and clients throughout the US, we prioritize the growth and well-being of our employees. EIS develops leaders at every level, fostering well-equipped and diverse professionals for long-term success. EIS is a recognized Top Workplace for 2025 and for the past four years running. Our offices are located in Metairie, Louisiana, and Beaumont, Texas, with a dedicated Inspection Division headquartered in Port Allen, Louisiana. Equal Opportunity Employer: Engineering & Inspection Services, LLC (EIS) is committed to diversity and inclusion in the workplace. We are an equal opportunity employer and prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, and training. EIS makes hiring decisions based solely on qualifications, merit, and business needs at the time. Engineering & Inspection Services, LLC (EIS) participatesinE-VerifyandRight to Workto confirm identity and employment eligibility.

Thompson Engineering is looking for a qualified Project Geotechnical Engineer. Project-Level Geotechnical Engineer The Project-Level Geotechnical Engineer is responsible for performing geotechnical engineering analyses and managing projects of varying scope and scale under the guidance of a Senior or Principal Engineer. This role supports transportation, heavy industrial, and infrastructure projects. Key duties include proposal preparation, fieldwork, engineering calculations, coordination of field and laboratory tasks, client interaction, and general civil engineering support. Key Responsibilities Technical & Field Duties Perform and/or lead field drilling services and associated engineering analysis and calculations Prepare geotechnical recommendations, designs, plans, and specifications Conduct observation and inspection services Write, prepare, and review related technical reports Perform field work including: Logging borings Supporting cone penetration testing (CPT) operations Performing geotechnical field testing Working alongside drill rigs and drilling crews, and/or on active construction sites related to Construction Materials Testing (CMT) services Project Management & Coordination Review construction drawings for compliance with plans and specifications Prepare proposals and cost estimates Track and evaluate project budgets and progress; recommend changes as needed Assign, review, and evaluate laboratory or field data for inclusion in reports Design & Engineering Research and resolve design and construction problems Assist with the initial design and investigative approach for major project phases Apply sound engineering principles and communicate technical concepts to both technical and non-technical stakeholders Plan, schedule, and coordinate engineering tasks involving both conventional and complex design requirements Leadership & Oversight Provide technical review and direction for complex investigations Supervise analysis and ensure findings and recommendations are clearly formulated in client reports Review and approve engineering documents and technical deliverables Qualifications Minimum Requirements Bachelor's degree in Engineering (Master's degree preferred) from an ABET/EAC-accredited program 0-5 years of experience in Geotechnical Engineering Ability to lift 50 lbs Willingness and ability to travel Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, construction inspection, and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. While we are still one of the first companies on project sites conducting environmental assessments, land surveys, and geotechnical studies, our design teams are close behind. We now deliver cutting-edge solutions to complex infrastructure and building requirements. And our project management and construction management services mean we are often one of the last teams to leave. From start to finish, we are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

"Together We Make Life Better". Our quality engineering, sustainable solutions and safety record inspire everything we do. Our diverse and inclusive workforce allows all employees to feel valued and safe to give their opinions and improve our company. Tata Consulting Engineers USA, LLC, (TCE), is a multi-disciplinary engineering organization offering a full range of integrated engineering design, project support, procurement and construction management services to the energy and chemicals industries. Position Summary Serves as a project manager for capital and expense projects of all sizes using the AmSty Project Delivery Work Process. This position also provides technical support to the Production and Maintenance Departments. The successful candidate will work closely with Production, Maintenance, Environmental, Health and Safety teams to develop and execute projects for the St James facility. Responsibilities Develop and implement projects which improve the profitability, operability, reliability, safety, and environmental performance of the St. James Plant in accordance with Business Plan and Plant Specific objectives. Plan and lead the efforts of the project team through the development and execution of projects. Develop the scope of projects, evaluating options, and obtaining management approval. Obtain funding for the projects. Opens, manages and closes projects in SAP and periodically reports status to management. Reporting progress and forecasting costs on a regular basis. Prepare bid specifications, evaluate bids, and select engineering and construction contractors. Monitor / manage the design and construction of projects to ensure that they are engineered and built according to key project plans and company standards. Monitor / control the cost & timing of projects to keep expenditures and schedules within the limits authorized by management. Manage the start-up of projects and project closure activities in a safe and timely manner so that the project benefits can be fully realized. Provide turnaround support, troubleshooting and engineering analysis. Perform other duties as assigned or needed. Qualifications Bachelor's degree in electrical engineering is preferred. 10+ years' experience in a chemical processing or refinery environment. Strong commitment to personal safety. Excellent communication and interpersonal skills for interacting with the exceptionally broad array of people having diverse backgrounds encountered during the life of a project. Broad generalized knowledge of chemical, civil, mechanical, electrical, instrumentation, and control engineering. Broad generalized knowledge of industry design codes, standards, and practices. Broad generalized knowledge of personnel safety, process safety, and environmental principles / regulations. Project management and administrative skills necessary to plan, organize, coordinate, and control the development and execution of a project - including cost and schedule control. Ability to manage multiple assignments in a fast-paced manufacturing environment. Knowledge of a structured project management or project development and execution process a plus. Excellent technical and problem-solving skills to identify alternatives to challenges presented and select the most appropriate solution with minimal guidance or precedence. EEO Statement Tata Consulting Engineers USA, LLC ("TCE") is an equal opportunity and affirmative action employer committed to promoting diversity, equity, and inclusion in our workplace. We do not discriminate on the basis of race/ethnicity, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, veteran's status, or any other characteristic protected by local, state, or federal laws, rules, or regulations. In compliance with federal law, all candidates hired will be required to verify their identity and eligibility to work in the United States and to complete the required employment eligibility verification form after acceptance of a formal TCE offer letter through our onboarding system. Fraud Alert Please be aware that there have been instances of fraudulent job offers being made in the name of TCE by unauthorized individuals or organizations. We want to make it clear that TCE will never ask for any type of payment information during our interview process. Please be advised during our company transition, all email communications from TCE will come from our business email addresses, which end in '@tatconsultingengineers.com'. If you receive any suspicious job-related emails from any other domain, please do not respond to them and disregard any requests for personal or financial information. If you have any concerns about the legitimacy of a job offer or communication, please contact us through our website at tataconsultingengineers.com

Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job Summary: We are seeking versatile and driven Engineers to join our growing team at Saronic. In this role, you'll contribute to the design, development, integration, and testing of key systems powering our autonomous vessels. You'll work cross-functionally across hardware, software, and systems engineering disciplines in a fast-moving, startup environment. Responsibilities: Collaborate on the design, development, and integration of autonomous maritime systems, including navigation, propulsion, sensors, and communications. Support prototype builds, field tests, and demos in real-world maritime environments. Troubleshoot complex systems issues, both in the lab and in the field. Contribute to DoD technical deliverables, documentation, and compliance Work closely with the engineering and product teams to iterate rapidly and support evolving mission requirements. Qualifications: Bachelor's or Master's degree in Mechanical, Electrical, Systems, Robotics, Aerospace, Naval Architectureor related fields. Experience with autonomous systems, marine or naval platforms, or robotic vehicles. Strong systems-level understanding of hardware/software integration. Proficiency in CAD, embedded systems, or controls is a plus. Familiarity with DoD programs, military requirements, or defense contracting is a strong advantage. Comfort operating in dynamic, ambiguous startup environments. Benefits: Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands: Prolonged periods of sitting at a desk and working on a computer. Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages). This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3) . Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

About Us QISG leverages Quanta's comprehensive resources to deliver collaborative solutions for our partners' energy infrastructure needs. We use in-house talent, expertise and resources to plan, design, engineer, manage, conduct maintenance on and construct projects. Our turnkey service capabilities provide our customers with efficiency, consistency, attention to detail and safe execution. The QISG team brings together Engineering, Safety, Quality, Material Procurement, QA/QC, Right-of-Way Acquisition, Scheduling, Environmental Planning, Permitting, Title and Land Management expertise that ensure outstanding results for our clients. About this Role We use in-house talent, expertise and resources to plan, design, engineer, manage, conduct maintenance on and construct projects. This turnkey project execution strategy ensures there is one point of contact to handle projects of any size from beginning to end and allows a cohesive and coordinated Quanta Services team to enter the project life cycle at the earliest stage possible. Our turnkey service capabilities provide our customers with efficiency, consistency, attention to detail and safe execution. The QISG team brings together Engineering, Safety, Quality, Material Procurement, QA/QC, Right-of-Way Acquisition, Scheduling, Environmental Planning, Permitting, Title and Land Management expertise that ensure outstanding results for our clients. POSITION OVERVIEW: The Project Engineer will oversee the design of high voltage infrastructure projects. This role will involve providing an oversight role for the design team performing the detailed design. It will also include performing engineering to support EPC proposals. The ideal candidate will have a strong background in civil, mechanical, or electrical engineering, with extensive experience in high voltage substation or transmission line projects. What You'll Do Oversee projects from inception to completion, including: planning, design, permitting, construction support, and closeout. Review engineering calculations, drawings, and specifications for electrical substations or transmission lines. Ensure projects are on budget and schedule while ensuring cost-effective solutions. Review projects to verify compliance with local, state, and federal regulations and standards, including environmental and safety requirements. Coordinate with stakeholders, including government agencies, contractors, and the public, to ensure successful project delivery. Oversee quality control procedures to ensure the highest standards of workmanship and materials. Prepare and maintain detailed project status reports, engineering documentation, and records. Take personal responsibility for the quality and accuracy of his/her work. What You'll Bring Minimum of 5 years' experience in the electric utility industry performing detailed engineering for high voltage substation projects. Bachelor of Science degree (B.S.) or Graduate degree in Electrical Engineering from an ABET accredited university. P.E. license required. Strong technical expertise in structural, civil, electrical, or mechanical engineering, with a comprehensive understanding of engineering principles and practices. Expert knowledge of electric utility engineering and construction standards. Strong understanding of industry specific software packages. Familiarity with processes and procedures for project controls and estimates. Demonstrated experience supporting external customers. Excellent communication, interpersonal, and leadership skills, with the ability to collaborate effectively with internal teams, clients, and external partners. Knowledge of relevant industry codes, standards, and regulations, including ANSI, ASTM, ACI, AISC, IEEE, NEC, NESC, and others. Able to deal with ambiguity and ability to work independently, manage multiple tasks and determine priorities in a complex environment. Travel Requirements: Role will require travel as necessary to achieve job responsibilities, up to 10-25% of the time. What You'll Get Competitive salary and bonus structure. Comprehensive health and retirement benefits. Professional development opportunities. Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law. We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

Job DescriptionDescription: Job Title: Field Engineer Reports to: General Superintendent FLSA Status: Exempt Pay: Starting at $55,000/yr. Summary of Responsibilities The Field Engineer is responsible for all construction layout, collection of survey data, installation of control, and project as-built documentation. The field engineer ensures that all necessary features of work are laid out and installed correctly. The field engineer is also responsible for identifying and resolving field issues involving design, plan coordination, layout, and elevations prior to work. They must effectively communicate with all levels of personnel on the jobsite and at the home office. Taking Charge Durr TAKES CHARGE in constructing strong foundations to build upon. Our focus is to do it SAFE and to do it RIGHT the first time. Our vision is to make an IMPACT and to KICK ASS, INNOVATE, MAKE MONEY, HAVE FUN and REPEAT every day/all day. We hold every employee to this standard of “Taking Charge” and we expect this behavior to drive everything we do. The Take Charge FIELD ENGINEER: Does work right the first time - QUALITY Thoroughly understands entire contracted scope of work Attends and engages in pre-construction, progress, scheduling, and project/staff meetings Performs layout duties in such a manner that quality is of the utmost importance, understanding that work items will be installed in locations per the direction given Utilizes field engineering and layout hardware, software and technology (level, GPS, total station, Carlson, Leica, etc.) to its greatest and proper capabilities to ensure the most precise and accurate work can be performed and accomplished Performs quality control duties, checks previously installed work, identifies and documents work installed incorrectly and notifies supervisors, and holds team members accountable for doing the work correctly the first time and in compliance with all contract terms and conditions Ensures that all materials used are in accordance with project documents Maintains an organized, accurate and up-to-date set of all project drawings and as-builts; communicates with project team regarding project documentation, revisions and changes Ensures that a DOUBLE-CHECK is performed, by a separate surveyor, on all layout work before construction begins Proactively plans work items to ensure ON-TIME completion Coordinates the work of subcontractors to ensure field engineering needs are met Proactively identifies conflicts/issues within construction documents and progress; communicates them to project team for timely resolution Tracks project schedules and progress to ensure all duties will be performed on-time on multiple projects Efficiently manages workload to keep projects moving forward in a timely manner Performs quantity tracking and calculating when assigned and documents/communicates to project team Coordinates, communicates, and proactively engages with project management and field supervisors; reviewing work plans, and progress to identify issues and opportunities SAFETY - It's not a slogan, it's OUR CULTURE! Be actively engaged on your project Be a MENTOR - educate and provide guidance for those under your supervision. We are counting on you to TAKE CHARGE and ensure a safe jobsite for all our employees. Provide leadership and guidance during safety meetings, encouraging others opinions and engagement Do the little things right… set the tone for acceptable behaviors and let your crew see you do it. Hold them to the same standards. Housekeeping and organization is a great start. Your site teams will execute according to your expectations - and our standards are high. Recognize and identify hazards in upcoming work and pro-actively engage with the project manager and safety manager to mitigate any upcoming risks Remove employees that refuse to work safely Be knowledgeable regarding DURR's safety requirements… it is difficult to enforce something if you do not understand it. Familiarize yourself with our Safety Manual. REPORT ALL SAFETY INCIDENTS AND NEAR MISSES IMMEDIATELY The DURR Way: Be Proactive - Anticipate future needs and address today (not tomorrow) Be Accountable - Take ownership of your actions and honor your commitments made to other Speak the Truth - Always be honest and share your thoughts to improve yourself and the team Go the Extra Mile - Do what it takes to get the job done right and safe the first time Give Praise - Acknowledge and celebrate the achievements of teammates Be Part of One Team - Build strong win-win relationships with all teammates Knowledge, Skills and Abilities: Understanding of heavy construction, including but not limited to demolition, earthwork, utilities, and concrete paving and associated heavy equipment used during execution of work Familiarity with requirements and interpretation of drawings, specifications, submittals, RFI's and other construction related documentation In-depth understanding and capability to read and interpret drawings and specifications Ability to perform and be proficient in geometrical and mathematical calculations Knowledge and ability necessary to perform accurate layout and surveying with the use of a total station, GPS, levels, and data collectors Knowledge and ability to effectively function within and interpret AutoCad, Carlson, and other similar types of programs Knowledge of basic computer systems and software (Word, Excel, Outlook, etc.) Able to communicate effectively both orally and in writing Able to delegate work appropriately, and follow through to verify completion of tasks Strong decision making and problem solving skills Excellent time management and organizational skills Endurance and ability to visit entire job site, including stairs or other elevated structures Education and/or Experience: Preferred: Bachelor's degree in Construction Management, Engineering, or related field. Required: Minimum 5 years of field engineering experience, with a focus on heavy construction. Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. This position is performed in outside weather conditions. Requirements:

Your Job Georgia-Pacific Consumer Manufacturing Group is seeking qualified professionals to consider for a Project Engineer role supporting the Consumer Products Group Operations located in Zachary, LA. The Port Hudson facility uses integrated technology to manufacture tissue and paper towel products in a progressive production environment. The Project Engineer will play a critical role in planning, executing, and delivering engineering projects within the Georgia Pacific Paper Manufacturing Mill. This role requires a technically proficient engineer with strong project management skills who can work collaboratively with cross-functional teams to ensure projects are completed safely, on time, and within budget. The ideal candidate will have experience in paper manufacturing or a heavy industrial environment and a solid understanding of engineering principles, process optimization, and continuous improvement. Our Team The Port Hudson Plant is part of the tissue, towel, and napkin paper products manufacturing operation. We are proud to safely manufacture quality products that have a competitive advantage and solid growth within the marketplace. We create a work environment that attracts, engages, and retains the best people. Our employees help other's and the business reach their full potential, promoting our Principle-Based Management culture to the work they do every day. Our technology is state of the art, and we will bring the best team together to deliver for our customers, Georgia-Pacific, and the Zachary and Port Hudson communities. What You Will Do Drive Principle-Based Management (PBM) culture by leading through influence, fostering accountability, and supporting team development Develop detailed project plans by working individually or with a team to finalize scopes, estimates, and justification support for projects, including timelines, resource allocation, and budget estimates Collaborate with cross-functional teams to ensure design and functionality meet project requirements and ensure projects have a well-defined scope and objective up front Form a complete project team as each project requires - including resources for accounting, receiving, construction, engineering, startup and training process technical and operations Provide technical guidance and oversight throughout the project lifecycle, ensuring engineering standards and best practices are adhered too Act as a liaison between engineering, operations, and other departments Facilitate communication and collaboration to ensure smooth project execution Monitor and forecast project budgets, expenses, and resource allocations Identify potential cost overruns and implement corrective actions as necessary Ensure all project deliverables meet the required quality standards Conduct regular inspections and audits to maintain compliance with company and regulatory standards Identify potential risks and develop mitigation strategies Proactively address issues that may impact project timelines, costs, or quality Maintain comprehensive project documentation and provide regular status updates to stakeholders Prepare and present project reports and performance metrics, manage a portfolio of projects across several operating areas Participate in rotating weekend duty Who You Are (Basic Qualifications) Minimum of three (3) years project engineering experience in paper manufacturing, pulp & paper, industrial or heavy industry Strong knowledge of process engineering, project management tools (MS Project, Primavera, etc.), CAD software (AutoCAD, SolidWorks) Proven ability to manage complex projects, including budgeting, scheduling, and risk management Root cause analysis and continuous improvement experience Excellent communication, problem-solving, teamwork, and organizational skills What Will Put You Ahead Bachelor's degree or higher in Mechanical, Electrical, Chemical, or Industrial Engineering (or a related field) Experience working within Georgia-Pacific or a similar large-scale manufacturing environment Certification in Project Management (PMP or similar) Advanced education or certifications in Lean, Six Sigma, or Project Management Strong understanding of regulatory and environmental compliance standards relevant to paper and consumer products Ability to analyze complex situations, identify root causes, and develop appropriate solutions Experience working in a unionized manufacturing or industrial environment At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Hiring Philosophy All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds. We are Military Ready and Second Chance employers. Learn more about our hiring philosophy here . Who We Are As a Koch company and a leading manufacturer of bath, tissue, paper towels, paper-based packaging, cellulose, specialty fibers, building products and much more, Georgia-Pacific works to meet evolving needs of customers worldwide with quality products. In addition to the products we make, we operate one of the largest recycling businesses. Our more than 30,000 employees in over 150 locations are empowered to innovate every day - to make everyday products even better. At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company. Our Benefits Our goal is for each employee, and their families, to live fulfilling and healthy lives. We provide essential resources and support to build and maintain physical, financial, and emotional strength - focusing on overall wellbeing so you can focus on what matters most. Our benefits plan includes - medical, dental, vision, flexible spending and health savings accounts, life insurance, ADD, disability, retirement, paid vacation/time off, educational assistance, and may also include infertility assistance, paid parental leave and adoption assistance. Specific eligibility criteria is set by the applicable Summary Plan Description, policy or guideline and benefits may vary by geographic region. If you have questions on what benefits apply to you, please speak to your recruiter. Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results. Equal Opportunities Equal Opportunity Employer, including disability and protected veteran status. Except where prohibited by state law, some offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. Please click here for additional information. (For Illinois E-Verify information click here , aquí , or tu ). #LI-JS2

Job DescriptionBenefits: 401(k) Dental insurance Health insurance Paid time off EDUCATION & EXPERIENCE: Bachelor of Science Degree in Mechanical Engineering, Industrial Engineering, Civil Engineering, or Civil Technology, OR equivalent work experience. 1 5 years of manufacturing experience and/or construction management experience is preferred but not required. Working in a metal manufacturing environment is a plus. Proficiency with fully integrated computer systems, with relevant experience in Bill of Material (BOM) Development, Materials Requirement Planning, working knowledge of Computer Aided Design (CAD) software, FEA (Nastran and Cosmos), reading and interpreting Architectural Drawings, and mastery of traditional Engineering functions. Knowledge of FMEA (Failure Mode and Effect Analysis), Root Cause Analysis and Pareto Charts. Strong Computer knowledge including MS Office products. Strong oral & communication skills. Strong problem-solving skills. Analytical and critical thinking skills. Strong organizational skills, attention to detail and accuracy. Ability to learn with hands-on experience. Ability to gather data, compile information and make reports. Ability to multi-task, establish priorities and meet deadlines. Ability to work in a team environment. Ability to work and make decisions with minimal supervision. Knowledge of manufacturing processes related to sheet metal fabrication, die castings and extrusions. SPECIFIC AREAS OF RESPONSIBILITY: Assists in the initiation, execution, and completion of key custom systems projects through the entire project lifecycle. Provides Engineering support for Project Teams as each works to meet the variety of needs of both the External and the Internal Customers. Attends project kick-offs, design reviews, and manufacturing release meetings as requested. Works with contract consulting engineering resources to ensure engineering calculations are delivered meeting project specification requirements. Insures Architectural Product Specifications are met (i.e. ASTMs, UL, FM, etc.). Assists in developing costs for new components and development of cost/price relationships for outside Vendor Services vs. In-house manufacturing of components and sub-assemblies. Assists in the gathering of information required for Project Bids and Quotations. Strong working knowledge of sheet metal layouts for CNC Turret Punch Equipment and Brake Forming. Serves as the Team Technical Resource for both Product and Manufacturing Capabilities. Creates New Part Numbers and Standard Bills of Materials. Allocates materials required for Customer Sales Orders for assigned Projects and other Product Sales Orders. Performs quality drawing checks for customer shop drawings and internal fabrication drawings for assigned Projects ensuring that design intent is met and aligns with manufacturing capabilities, as needed. OTHER FUNCTIONAL REQUIREMENTS INCLUDE: Responds to Customer Needs for Specifications, Drawing/Product Details, and Calculations. Assists Teams with Project Take-offs. Works with outside Test Facilities to develop and perform tests required by 3rd Party Test Agencies. Responsible for Product Testing (i.e. curving, deflection, specification requirements, etc.). Develops and writes Product Specifications and Installation Instructions. Provides Purchasing Team with Vendor Specifications. Approves new Die Drawings, as requested. Responsible for First Article Inspections of new parts. Works with Production Team Leaders to resolve problems/issues on the production floor. Assists Sales Managers with Product Presentations. Field Site visits to assist Customers with installation of Gordon Systems and Products, as required. Maintains Charts, Graphs, Spreadsheets, Data Bases, and other informational documentation related to the Continual Improvement of process procedures as well as Team and Departmental Goals that are monitored for Continual Improvement. Monitors, Tracks, and Charts critical steps and procedures. Monitors both Individual and Team Goals and looks for opportunities for Personal and Professional Improvement. Other duties and responsibilities as assigned.

Arizona - Remote; Arkansas - Remote; Florida - Remote; Georgia - Remote; Idaho - Remote; Illinois - Remote; Indiana - Remote; Iowa - Remote; Kansas - Remote; Kentucky - Remote; Louisiana - Remote; Michigan - Remote; Minnesota - Remote; Mississippi - Remote; Missouri - Remote; Montana - Remote; Nebraska - Remote; Nevada - Remote; New Mexico - Remote; North Carolina - Remote; North Dakota - Remote; Ohio - Remote; Oklahoma - Remote; South Carolina - Remote; South Dakota - Remote; Tennessee - Remote; Texas - Remote; Utah - Remote; Virginia - Remote; West Virginia - Remote; Wisconsin - Remote; Wyoming - Remote **Company Description** We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. **Job Description** As a Electrical Engineer, on the Power Systems Studies group you will work directly with some of the world's largest technology companies and other mission-critical clients. You will serve as an electrical engineer on projects, design calculations, write technical reports, and prepare documents. Experience in performing short circuit analysis and producing arc flash studies is required. You will also coordinate with other Olsson teams, professional staff, technical staff, and clients. You may travel to job sites for observation and attend client meetings. _We currently have one opening and will consider candidates interested in being located in most locations across the United States._ **Qualifications** **You are passionate about:** + Working collaboratively with others. + Having ownership in the work you do. + Using your talents to positively affect communities. **You bring to the team:** + Strong communication skills + Ability to contribute and work well on a team + Ability to be a self-starter to take on a variety of tasks to best serve the client and their project work + Investigation and troubleshooting of problems to find solutions + Ability to contribute and work well on a team + Bachelor's Degree in electrical engineering + 2+ years or related electrical engineering experience + EIT required + SKM and ETAP software experience is preferred \#LI-DD1 **Additional Information** Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: + Receive a competitive 401(k) match + Be empowered to build your career with tailored development paths + Have the possibility for flexible work arrangements + Engage in work that has a positive impact on communities + Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Noticehere (************************************** . Create a Job Alert Interested in building your career at Olsson? Get future opportunities sent straight to your email.

EIS is seeking a Fixed Equipment Engineer with strong experience in large static equipment, including pressure vessels, piping systems, exchangers, and heaters. The ideal candidate will have previous experience as a Mechanical Engineer in a refinery or chemical plant, along with knowledge of reliability and maintenance strategies for fixed equipment. This role is responsible for supporting plant reliability, maintenance programs, and ensuring compliance with industry standards and client requirements. Key Responsibilities: Assist in formulating, implementing, maintaining, and auditing Preventive Maintenance (PM) and Predictive Maintenance (PdM) programs. Collaborate with Maintenance and Inspection teams to troubleshoot mechanical issues with pressure vessels, storage tanks, and piping systems. Provide engineering expertise and maintenance strategies to optimize equipment availability, reliability, and cost efficiency. Maintain and improve plant reliability by identifying and correcting operational reliability opportunities. Develop and update equipment strategies in alignment with client needs and industry standards. Establish and monitor programs for critical equipment analysis and condition monitoring techniques. Perform and review thickness calculations per API 510, API 570, and API 579 - Fitness for Service. Required Skills & Abilities: Proficiency in MS Excel, MS Word, and related engineering software. Strong interpersonal and communication skills, with the ability to provide internal consulting and deliver technical presentations. Effective analytical and problem-solving skills with the ability to make sound recommendations. Ability to wear and properly utilize personal protective equipment (PPE), including hardhat, safety glasses, respirators, ear plugs, and steel-toed shoes. Education & Experience: Bachelor of Science degree in Mechanical Engineering required. 1-3 years of experience as a Mechanical Engineer or in a related functional area. Hands-on experience with large static equipment (vessels, pipes, exchangers, heaters, etc.) required. Knowledge of ASME and API codes (510, 570, 579, etc.) required. Experience with Predictive and Preventive Maintenance Programs preferred. Strong results-driven mindset with critical thinking and problem-solving ability. Must be in good standing with DISA and hold a valid TWIC card. Physical Requirements: Ability to stand, walk, climb ladders/stairs, and work at heights. Ability to enter confined spaces (with proper training/permits). Lift and carry up to 25-50 pounds occasionally. Normal hearing and vision (close, distance, depth perception, focus). Must wear required PPE: hardhat, safety glasses, FRC, gloves, steel-toed boots, hearing and respiratory protection as needed. Working Conditions: Work performed in both office and plant/field environments. Exposure to outdoor weather, loud noise, fumes, chemicals, and moving equipment. May require extended hours, nights, weekends, or holidays during Turnarounds or outages. Travel to client sites may be required. Must comply with all site safety rules and medical/PPE requirements (e.g., TWIC, DISA, fit testing). About Us: Engineering & Inspection Services (EIS) is a multidisciplinary engineering firm offering Engineering & Design, Field Services, Inspection & Mechanical Integrity, and Technology Development. Founded by engineers, EIS has placed engineering at the core of our business since 2000. Our clients in the petrochemistry industry rely on us to exceed their expectations in safety, efficiency, reliability, and sustainability. At EIS, we bring knowledge, experience, and integrity to every project. With team members across the Gulf South and clients throughout the US, we prioritize the growth and well-being of our employees. EIS develops leaders at every level, fostering well-equipped and diverse professionals for long-term success. EIS is a recognized “Top Workplace” for 2025 and for the past four years running. Our offices are located in Metairie, Louisiana, and Beaumont, Texas, with a dedicated Inspection Division headquartered in Port Allen, Louisiana. Equal Opportunity Employer: Engineering & Inspection Services, LLC (EIS) is committed to diversity and inclusion in the workplace. We are an equal opportunity employer and prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, and training. EIS makes hiring decisions based solely on qualifications, merit, and business needs at the time. Engineering & Inspection Services, LLC (EIS) participates in E-Verify and Right to Work to confirm identity and employment eligibility.

Job Description Thompson Engineering is looking for a qualified Project Geotechnical Engineer. Project-Level Geotechnical Engineer The Project-Level Geotechnical Engineer is responsible for performing geotechnical engineering analyses and managing projects of varying scope and scale under the guidance of a Senior or Principal Engineer. This role supports transportation, heavy industrial, and infrastructure projects. Key duties include proposal preparation, fieldwork, engineering calculations, coordination of field and laboratory tasks, client interaction, and general civil engineering support. Key Responsibilities Technical & Field Duties Perform and/or lead field drilling services and associated engineering analysis and calculations Prepare geotechnical recommendations, designs, plans, and specifications Conduct observation and inspection services Write, prepare, and review related technical reports Perform field work including: Logging borings Supporting cone penetration testing (CPT) operations Performing geotechnical field testing Working alongside drill rigs and drilling crews, and/or on active construction sites related to Construction Materials Testing (CMT) services Project Management & Coordination Review construction drawings for compliance with plans and specifications Prepare proposals and cost estimates Track and evaluate project budgets and progress; recommend changes as needed Assign, review, and evaluate laboratory or field data for inclusion in reports Design & Engineering Research and resolve design and construction problems Assist with the initial design and investigative approach for major project phases Apply sound engineering principles and communicate technical concepts to both technical and non-technical stakeholders Plan, schedule, and coordinate engineering tasks involving both conventional and complex design requirements Leadership & Oversight Provide technical review and direction for complex investigations Supervise analysis and ensure findings and recommendations are clearly formulated in client reports Review and approve engineering documents and technical deliverables Qualifications Minimum Requirements Bachelor's degree in Engineering (Master's degree preferred) from an ABET/EAC-accredited program 0-5 years of experience in Geotechnical Engineering Ability to lift 50 lbs Willingness and ability to travel Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, construction inspection, and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. While we are still one of the first companies on project sites conducting environmental assessments, land surveys, and geotechnical studies, our design teams are close behind. We now deliver cutting-edge solutions to complex infrastructure and building requirements. And our project management and construction management services mean we are often one of the last teams to leave. From start to finish, we are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.