Staff engineer jobs in Rio Rancho, NM - 273 jobs

EXCITING NEW OPPORTUNITY TO SUPPORT NEW DEVELOPMENT FOR THE US MILITARY First sea-based hypersonic strike capability Title: Flight Software Engineer This Team Flight Software Design Engineering group for a Missile Flight Software Engineer to provide on-site support to the Sandia National Labs (SNL) Navigation Guidance & Control (NGC) group responsible for the Conventional Prompt Strike (CPS) program. This opportunity in Albuquerque, NM will focus on embedded software development activities enabling the integration of new capabilities, algorithms, and avionics devices. The established DevOps culture enables staff to contribute to all areas of software design, development, and test Description Implement the software development lifecycle process for the CPS program Develop embedded software for highly reliable real-time flight systems Write device drivers for real-time operating systems; enable integration of new avionics components Assist with software development associated with software test fixtures such as Hardware-in-the-Loop (HWIL) test assets Support system-level hardware testing including participation on-console with Assembly, Integration, and Test teams Architect and implement software test methodologies Act as technical lead for software tasks Contribute to software architecture design and development Coordinate and collaborate with external program partners to meet program-level objectives and achievements Periodic travel may be required to support system-level integration testing and flight test activities. Trip durations can range from a few days to several weeks, depending on assigned roles and responsibilities. Performs other duties as assigned or required. Top Skills Details C/c++ Embedded software development Green Hills Integrity RTOS Flight, Missile or Vehicle software Other Skills Embedded software, C/c++, Python, powershell scripting, MATLAB, integrity verification software, debugging software, functional testing, google test, git, hardware, hardware test Relocation assistance and temporary housing provided Pay and Benefits The pay range for this position is $50.86 - $91.05/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Albuquerque,NM. Application Deadline This position is anticipated to close on Apr 25, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I are embedded into our culture through: Hiring diverse talent Maintaining an inclusive environment through persistent self-reflection Building a culture of care, engagement, and recognition with clear outcomes Ensuring growth opportunities for our people The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

At AV we provide a full suite of exquisite, space-qualified hardware trusted to fly in the most extreme environments space presents across GEO, MEO, LEO and Cislunar orbits. With hundreds of systems flying in space, our customers turn to AV when a mission can't fail. Our team is expanding to do the big things that have never been done before - the things the nation and the world are counting on us to deliver. Join the transformation and help us make this impact now. JOIN US FOR OUR INVITATION-ONLY HIRING EVENT ON FEBRUARY 24. APPLY TODAY TO BE CONSIDERED FOR THIS SPECTACULAR EVENT. We are seeking mechanical engineers to provide engineering design and analysis support to diverse R&D programs and small-volume production contracts. The selected candidates would be expected to lead the structural and thermal analysis of mechanical systems for space and airborne hardware, work within a multi-disciplined project team, be responsible for mechanical design and analysis activity, and support integration and formal acceptance-test activities. Projects vary from packaging high reliability electronics subsystems to opto-mechanical mechanism design such as gimbal and steering mirror systems. YOU'RE REQUIRED TO HAVE THIS Bachelor's degree in mechanical or aerospace engineering. 2, or more, years mechanical engineering experience in one or more of the following areas: structural and thermal analysis including analytical calculations and FEA (stress analysis, modal analysis, thermal conduction analysis, bolt loads, etc.). design using CAD software, ideally experience with SolidWorks. tolerance analysis and GD&T practices. space hardware design, analysis, integration, and test. Strong technical writing skills applicable to engineering documentation (analysis reports, specifications, requirements documents, etc.). Ability to obtain and maintain a US DoD security clearance. DESIRED QUALIFICATIONS 5-8 years' experience in mechanical engineering of space systems. Strong verbal communication skills needed for customer interaction at design reviews, supplier interaction, etc. Ability to quickly adapt to various projects and types of work and to work several projects simultaneously while managing time and priorities. Ability to work independently or as part of a development team. Experience and willingness to be hands on during hardware assembly, integration, and test. Current US security clearance. Clearance Level No Clearance ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR

Details: Job Title: Mechanical Design Engineer Focus: HVAC Design for DoD & Aerospace Facilities Schedule: Hybrid Salary: $100,000 - $132,000 (Pay offered may vary depending on job related knowledge, skills, and experience.) Client Overview: Our client's High Performance Facilities (HPF) team is seeking an experienced Mechanical Facilities Engineer to provide HVAC and Plumbing design for a wide range of national defense projects in their Albuquerque, NM office. From multi-building campuses to secure facilities across the globe, the HPF team designs and delivers sustainable solutions to meet Government needs for resiliency, readiness, and reliability. Our work directly impacts the operation and efficiency of installations vital to the protection and defense of the United States. WHAT YOU'LL DO The Mechanical Facilities Engineer III will design HVAC and Plumbing/Piping systems for an exciting range of mission critical to mission support projects. Project work will encompass: Plan, conduct, and coordinate detailed phases of HVAC and Plumbing design work with calculations, process flow diagrams, piping and instrumentation diagrams, layout of mechanical equipment and associated duct and piping systems, and sequences of operations. Develop mechanical construction and equipment specifications, test and inspection plans, and system design descriptions. Evaluate, select, and apply standard techniques, procedures, and criteria to perform a task or sequence of tasks for projects with less complex features, but also collaborate and use judgment to determine adaptations in methods for non-routine aspects of assignments and more complex projects. Perform engineering quality assurance checks of project designs. Support new project proposals with mechanical discipline scopes, budget estimates, and schedules. Interface with and present designs to Federal, State, and Local government client contacts. The Mechanical Facilities Engineer III will be a key member of a multi-disciplinary team of architectural and engineering staff producing project design packages of drawings, specifications, and calculations. The position includes great leadership opportunity with task assignment and work coordination with engineers, designers, and administrative staff. Periodic travel to other offices or project site locations, including international travel, may be required. REQUIRED QUALIFICATIONS Degree Requirements: Bachelor of Science in Mechanical Engineering from an ABET Accredited Program is required. Engineering Technology degree will not be considered. Minimum eight (8) years of experience - MUST HAVE PE License required. Ability to obtain a Department of Defense security clearance. Experience in HVAC and plumbing/piping systems design and associated engineering calculations (e.g. Air-handling systems, laboratory fume hood exhaust air systems, duct systems, heating and chilled water hydronic piping systems, natural gas piping systems, domestic water and waste water piping systems, steam and condensate piping systems, compressed air systems, and mechanical system controls). Experience sizing and selecting HVAC and plumbing/piping equipment (e.g. air-handling units, fans/blowers, pumps, cooling towers, chillers, boilers, coils, HEPA filtration systems, dampers, valves, and controls). Proficient in editing and writing mechanical construction and equipment specifications. Proficient in Microsoft Word and Excel. Experience using HVAC computer load and design programs such as Trane Trace software; knowledge of Revit building information modeling software; and familiarity with AutoCAD. Working knowledge of ASHRAE, SMACNA, and NFPA standards. Working knowledge of IMC, IPC, and IBC codes. The client projects for this position require U.S. Citizenship. DESIRED QUALIFICATIONS Active Secret clearance with eligibility to obtain Top Secret with SCI LEED or Green Globes accreditation PERKS Employee Owned - all eligible U.S. employees have an Employee Stock Ownership Account. Robust Employee Referral Program. Annual performance and compensation reviews. Professional Training and Development. Employee Recognition Awards. Peer Mentor Program And Much More! ADDITIONAL INFORMATION Competitive compensation and benefits package which includes health insurance, dental and vision coverage, 401(k), and paid time off (PTO). Equal Opportunity Employer, including disability/vets. Employment with this client is contingent upon successful completion of a pre-employment background check and drug screen. Please email me directly with your updated resume' and availability for a phone call @ ****************************** #INDG

Merrick & Company's High Performance Facilities (HPF) team is seeking an experienced Mechanical Facilities Engineer III to provide HVAC and Plumbing design for a wide range of national defense projects in our Albuquerque, NM office. From multi-building campuses to secure facilities across the globe, the Merrick HPF team designs and delivers sustainable solutions to meet Government needs for resiliency, readiness, and reliability. Our work directly impacts the operation and efficiency of installations vital to the protection and defense of the United States. Annual salary range for this position is $102,400.00 - $132,600.00. Base pay offered may vary depending on job-related knowledge, skills, and experience. WHAT YOU'LL DO The Mechanical Facilities Engineer III will design HVAC and Plumbing/Piping systems for an exciting range of mission critical to mission support projects. Project work will encompass: * Plan, conduct, and coordinate detailed phases of HVAC and Plumbing design work with calculations, process flow diagrams, piping and instrumentation diagrams, layout of mechanical equipment and associated duct and piping systems, and sequences of operations. * Develop mechanical construction and equipment specifications, test and inspection plans, and system design descriptions. * Evaluate, select, and apply standard techniques, procedures, and criteria to perform a task or sequence of tasks for projects with less complex features, but also collaborate and use judgment to determine adaptations in methods for non-routine aspects of assignments and more complex projects. * Perform engineering quality assurance checks of project designs. * Support new project proposals with mechanical discipline scopes, budget estimates, and schedules. * Interface with and present designs to Federal, State, and Local government client contacts. The Mechanical Facilities Engineer III will be a key member of a multi-disciplinary team of architectural and engineering staff producing project design packages of drawings, specifications, and calculations. The position includes great leadership opportunity with task assignment and work coordination with engineers, designers, and administrative staff. Periodic travel to other Merrick offices or project site locations, including international travel, may be required. REQUIRED QUALIFICATIONS * Degree Requirements: Bachelor of Sciences in Mechanical Engineering. * Minimum eight (8) years of experience. * Professional Engineering (P.E.) License required. * Ability to obtain a Department of Defense security clearance. * Experience in HVAC and plumbing/piping systems design and associated engineering calculations (e.g. Air-handling systems, laboratory fume hood exhaust air systems, duct systems, heating and chilled water hydronic piping systems, natural gas piping systems, domestic water and waste water piping systems, steam and condensate piping systems, compressed air systems, and mechanical system controls). * Experience sizing and selecting HVAC and plumbing/piping equipment (e.g. air-handling units, fans/blowers, pumps, cooling towers, chillers, boilers, coils, HEPA filtration systems, dampers, valves, and controls). * Proficient in editing and writing mechanical construction and equipment specifications. * Proficient in Microsoft Word and Excel. * Experience using HVAC computer load and design programs such as Trane Trace software; knowledge of Revit building information modeling software; and familiarity with AutoCAD. * Working knowledge of ASHRAE, SMACNA, and NFPA standards. * Working knowledge of IMC, IPC, and IBC codes. * The client projects for this position require U.S. Citizenship. DESIRED QUALIFICATIONS * LEED or Green Globes accreditation PERKS * Employee Owned - all eligible U.S. employees have an Employee Stock Ownership Account. * Robust Employee Referral Program. * Annual performance and compensation reviews. * Professional Training and Development. * Employee Recognition Awards. * Peer Mentor Program * And Much More! ADDITIONAL INFORMATION * Apply online only. No e-mail, hard copy or third-party resumes accepted. * At Merrick, every resume is carefully reviewed by our team of experienced human recruiters-never by AI. We are committed to a fully human-centered hiring process, ensuring each candidate receives thoughtful, personalized attention at every stage. * Merrick & Company offers a competitive compensation and benefits package which includes health insurance, dental and vision coverage, 401(k), and paid time off (PTO). * Merrick is an Equal Opportunity Employer, including disability/vets. * Employment with Merrick is contingent upon completion of a pre-employment background check, MVR check, and drug screen. * Degree Requirements: Bachelor of Sciences in Mechanical Engineering. * Minimum eight (8) years of experience. * Professional Engineering (P.E.) License required. * Ability to obtain a Department of Defense security clearance. * Experience in HVAC and plumbing/piping systems design and associated engineering calculations (e.g. Air-handling systems, laboratory fume hood exhaust air systems, duct systems, heating and chilled water hydronic piping systems, natural gas piping systems, domestic water and waste water piping systems, steam and condensate piping systems, compressed air systems, and mechanical system controls). * Experience sizing and selecting HVAC and plumbing/piping equipment (e.g. air-handling units, fans/blowers, pumps, cooling towers, chillers, boilers, coils, HEPA filtration systems, dampers, valves, and controls). * Proficient in editing and writing mechanical construction and equipment specifications. * Proficient in Microsoft Word and Excel. * Experience using HVAC computer load and design programs such as Trane Trace software; knowledge of Revit building information modeling software; and familiarity with AutoCAD. * Working knowledge of ASHRAE, SMACNA, and NFPA standards. * Working knowledge of IMC, IPC, and IBC codes. * The client projects for this position require U.S. Citizenship. The Mechanical Facilities Engineer III will design HVAC and Plumbing/Piping systems for an exciting range of mission critical to mission support projects. Project work will encompass: * Plan, conduct, and coordinate detailed phases of HVAC and Plumbing design work with calculations, process flow diagrams, piping and instrumentation diagrams, layout of mechanical equipment and associated duct and piping systems, and sequences of operations. * Develop mechanical construction and equipment specifications, test and inspection plans, and system design descriptions. * Evaluate, select, and apply standard techniques, procedures, and criteria to perform a task or sequence of tasks for projects with less complex features, but also collaborate and use judgment to determine adaptations in methods for non-routine aspects of assignments and more complex projects. * Perform engineering quality assurance checks of project designs. * Support new project proposals with mechanical discipline scopes, budget estimates, and schedules. * Interface with and present designs to Federal, State, and Local government client contacts. The Mechanical Facilities Engineer III will be a key member of a multi-disciplinary team of architectural and engineering staff producing project design packages of drawings, specifications, and calculations. The position includes great leadership opportunity with task assignment and work coordination with engineers, designers, and administrative staff. Periodic travel to other Merrick offices or project site locations, including international travel, may be required.

Company Unirac is a national leader in the solar PV structural mounting industry. We enable our customers to power the world with clean, abundant energy by creating dependable, innovative mounting solutions. Unirac is a fast-paced work environment and is growing rapidly with many changes and new opportunities arising regularly. Job description Unirac is seeking a Product Development Engineer with a proven track record of bringing innovative solutions to market. Product development engineers at Unirac work as part of a multi-disciplinary team to develop products that delight our customers with a strong focus on innovation, manufacturability, and cost-control. PD engineers apply principles of engineering to evaluate new and existing products, utilizing state-of-the-art tools and physical testing methods. The Product Development Engineer serves as a technical lead, leveraging their experience to guiding engineering programs and initiatives from ideation through execution while meeting project schedule targets and product functional, performance, and cost requirement. Duties and Responsibilities Innovate, conceive, design, engineer and develop products and/or components to provide new or improved function, to enter new markets and/or reduce costs of legacy products, in accordance with documented product requirements. Engineer products in accordance with appropriate regulatory requirements and associated standards, such as model building and electrical codes, ASCE 7, aluminum or steel design manuals, ASTM standards, etc. Select appropriate materials for applications, considering strength, deflection, cost, finish, corrosion, friction, etc. Engineer products considering techniques such as design for manufacturability, assembly, reliability. Consider ergonomic factors in product design, and how a product will actually install in the field Provide system level costs for new products Develop product acceptance criteria and test plans. Document product designs, engineering, test results and engineering changes in engineering reports. Review and approve Unirac engineering and test reports for new product introductions Create and/or order prototypes in the conception and development of new products and document results in engineering and/or test reports Create presentations and present engineering designs and changes as required Coordinate, communicate, interact and provide technical support to other functional groups Investigate new technologies, tools and processes and make recommendations for adoption as appropriate Ensure goals, schedules, cost targets and budgets are met Provide leadership and guidance to members of the PD group and others as needed Provide mentorship as needed. Maintain working knowledge of customer requirements and competitor trends Provide business level strategic thinking / and guidance based on engineering experience and expertise. Requirements BS in CE, ME, ArchE or other as relevant or equivalent Minimum 2 years of experience in mechanical, or structural engineering or similar Knowledge related to products manufactured via one of more of the following processes; extrusion, roll forming, casting, injection molding, stamping or machining. General understanding of load calculations and structural engineering. Demonstrated expertise with engineering methods and tools including structural and/or mechanical engineering methods, CAD, Finite Element Analysis, , as well as office tools MS Project, Excel, PowerPoint, Word Experience working with Codes and Standards (International Building Code, National Electrical Code), and ability to effectively communicate with Nationally Recognized Test Laboratories and local Authorities Having Jurisdiction Desired Areas of Expertise Desired experience with residential, commercial and/or utility scale photovoltaic systems, product requirements and engineering processes, especially regarding system mounting structure Desired experience with photovoltaic module and racking certification requirements Desired subject matter expert / authority in at least one relevant technical subject (i.e Aluminum or Steel Design, Code, etc) Qualifications Skill Requirements At least 1 year of experience in mechanical, structural engineering or similar /8+ preferred 3 years new product development experience preferred Engineering analysis Structural design, strength and cost optimization, material selection, and FEA analysis Innovative, think creatively, be hands-on and mechanically inclined Ability to generate concepts and create physical, testable prototypes Expert proficiency in CAD and 3-D modeling, Inventor preferred Comfortable with hand tools and familiarity with machine tools (mill, lathe, saw, etc.) preferred. Educational Requirements Bachelor of Science in Mechanical, Structural, Civil Industrial Engineering or similar required, Master of Science in Engineering preferred Physical Requirements/Working Conditions Office environment, manufacturing shop, test lab, and in-field environments Sitting, standing, and bending required (standing desks are provided so more or less standing can be accommodated within the office environment) Benefits Competitive Compensation Package Alternative work schedules Affordable Healthcare Benefits Package (Medical, Dental, Vision, Disability & Life/AD&D insurance, 401K) In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire.

NV5 is a provider of engineering and consulting services to public and private sector clients, delivering solutions through six business verticals: Testing, Inspection & Consulting; Infrastructure; Utility Services; Environmental Health Sciences; Buildings & Program Management; and Geospatial Technology. With offices nationwide and abroad, NV5 helps clients plan, design, build, test, certify, and operate projects that improve the communities where we live and work. As engineers, architects, construction/program managers, environmental professionals, and beyond, we play a significant role in shaping our communities through the services we provide. We are looking for passionate, driven individuals to join our team focused on Delivering Solutions and Improving Lives . The successful candidate should be an Engineer in Training (EIT) or be able to obtain EIT within 6 months. Success in this position requires a person who can adapt to a variety of personalities and business conditions and can work within a multidiscipline team. The person must possess skills in problem solving and critical thinking, and must be steadfast in the execution of assigned duties. The person needs to be an effective leader and collaborator with an ability to manage a fleet of Soil/Concrete Technicians, Special Inspectors, and Laboratory staff. Responsibilities Manages special inspectors and technician staff Manages projects and associated budgets Prepares and reviews inspection and observation reports submitted to various agencies and other clients. Plans, assigns, prioritizes, evaluates, and reviews the work of special inspectors and technicians; and support staff for consistency, accuracy, timeliness, conformance to guidelines and technical merit. Oversees the preparation and submission of timely reports and maintenance of records Develops, implements, and interprets policies, procedures, and programs for special inspection and testing Communicates, interprets, and keeps current on changes in observation and inspection guidelines and regulations. billings versus budget through regular meetings with Principals. Oversight of all Materials testing on soils, asphalt, and concrete. Oversight of all IBC Special Inspections in accordance with IBC Chapter 17 Good driving record, willing to travel Oversight of laboratory qualifications Qualifications BS in civil engineering with emphasis in geotechnical a plus A minimum of 2 years of relevant experience. Ability to work as part of a multi-disciplinary team, think creatively, and problem solve. Reviewing technical specifications and filed/laboratory reports. knowledge of building codes and construction industry standards. Experience with AASHTO and ASTM test methods pertaining to construction materials, including HMA, aggregate, soils, steel, masonry, and concrete. Experience reviewing concrete/asphalt mix designs. Thorough understanding of accreditation policies for all relevant agencies including AMRL, CCRL, IAS, etc. Proficiency in computer applications, including MS Office. Strong verbal and written communication skills NV5 offers a competitive compensation and benefits package including medical, dental, life insurance, PTO, 401(k), and professional development/advancement opportunities. NV5 provides equal employment opportunities (EEO) to all applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. NV5 complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #LI-KS1

NV5 is a provider of engineering and consulting services to public and private sector clients, delivering solutions through six business verticals: Testing, Inspection & Consulting; Infrastructure; Utility Services; Environmental Health Sciences; Buildings & Program Management; and Geospatial Technology. With offices nationwide and abroad, NV5 helps clients plan, design, build, test, certify, and operate projects that improve the communities where we live and work. As engineers, architects, construction/program managers, environmental professionals, and beyond, we play a significant role in shaping our communities through the services we provide. We are looking for passionate, driven individuals to join our team focused on Delivering Solutions and Improving Lives. The successful candidate should be an Engineer in Training (EIT) or be able to obtain EIT within 6 months. Success in this position requires a person who can adapt to a variety of personalities and business conditions and can work within a multidiscipline team. The person must possess skills in problem solving and critical thinking, and must be steadfast in the execution of assigned duties. The person needs to be an effective leader and collaborator with an ability to manage a fleet of Soil/Concrete Technicians, Special Inspectors, and Laboratory staff. Responsibilities * Manages special inspectors and technician staff * Manages projects and associated budgets * Prepares and reviews inspection and observation reports submitted to various agencies and other clients. * Plans, assigns, prioritizes, evaluates, and reviews the work of special inspectors and technicians; and support staff for consistency, accuracy, timeliness, conformance to guidelines and technical merit. * Oversees the preparation and submission of timely reports and maintenance of records * Develops, implements, and interprets policies, procedures, and programs for special inspection and testing * Communicates, interprets, and keeps current on changes in observation and inspection guidelines and regulations. billings versus budget through regular meetings with Principals. * Oversight of all Materials testing on soils, asphalt, and concrete. * Oversight of all IBC Special Inspections in accordance with IBC Chapter 17 * Good driving record, willing to travel * Oversight of laboratory qualifications Qualifications * BS in civil engineering with emphasis in geotechnical a plus * A minimum of 2 years of relevant experience. * Ability to work as part of a multi-disciplinary team, think creatively, and problem solve. * Reviewing technical specifications and filed/laboratory reports. * knowledge of building codes and construction industry standards. * Experience with AASHTO and ASTM test methods pertaining to construction materials, including HMA, aggregate, soils, steel, masonry, and concrete. * Experience reviewing concrete/asphalt mix designs. * Thorough understanding of accreditation policies for all relevant agencies including AMRL, CCRL, IAS, etc. * Proficiency in computer applications, including MS Office. * Strong verbal and written communication skills NV5 offers a competitive compensation and benefits package including medical, dental, life insurance, PTO, 401(k), and professional development/advancement opportunities. NV5 provides equal employment opportunities (EEO) to all applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. NV5 complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #LI-KS1

Collabera is ranked amongst the top 10 Information Technology (IT) staffing firms in the U.S., with more than $525 million in sales revenue and a global presence that represents approximately 12,000+ professionals across North America (U.S., Canada), Asia Pacific (India, Philippines, Singapore, Malaysia), and Europe (Ireland, Netherlands, Poland, United Kingdom). We support our clients with a strong recruitment model and a sincere commitment to their success, which is why more than 75% of our clients rank us amongst their top three staffing suppliers. Not only are we committed to meeting and exceeding our customer's needs, but also are committed to our employees' satisfaction as well. We believe our employees are the cornerstone of our success and we make every effort to ensure their satisfaction throughout their tenure with Collabera. As a result of these efforts, we have been recognized by Staffing Industry Analysts (SIA) as the “Best Staffing Firm to Work For” for five consecutive years since 2012. Collabera has over 50 offices across the globe with a presence in ten countries and provides staff augmentation, managed services and direct placement services to global 2000 corporations. For consultants and employees, Collabera offers an enriching experience that promotes career growth and lifelong learning. Visit ***************** to learn more about our latest job openings. Awards and Recognition --Staffing Industry Analysts: Best Staffing Firm to Work For (2016, 2015, 2014, 2013, 2012) --Staffing Industry Analysts: Largest U.S. Staffing Firms (2016, 2015, 2014, 2013) --Staffing Industry Analysts: Largest Minority Owned IT Staffing Firm in the US. Job Description A Fortune 100 aerospace giant hiring Manufacturing engineer responsible for supporting New Product Introduction (NPI) including planning and execution of new production line start up for avionics. The successful candidate would be coordinating with suppliers and engineering to analyze layout of equipment, workflow, assembly methods, and capacity. Position details: Client: Fortune 100 aerospace giant Job Title: Manufacturing engineer Location: Albuquerque, NM 87113 Job Summary: · Analyze BOM's and develops cost reduction strategies and initiatives with engineering early in the development cycle and oversees all aspects of execution. · Responsible for all aspects of manufacturability assessments by ensuring product complexity analysis is completed and design engineering has simplified: Bill of Materials, process, tooling, and assembly labor. · Position also is responsible to ensure obsolescence strategies have been developed prior to entry into production. · Role is heavily responsible for in depth cross organization coordination between all functional organizations. Role is expected to be able to develop in depth manufacturing plans. · Able to lead workshops in cost reduction, DFx, or DFm. Qualifications · Requires a bachelor's degree in engineering or equivalent industry experience and 2-4 years of experience in the field or in a related area. · Strong skills with excel, PowerPoint, Visio. · Lean Six Sigma or Black Belt skills. · Prior manufacturing experience planning new product introduction of circuit board assemblies or box build assemblies at a contract manufacturer. Additional Information If you want to know more and apply, please connect with: Niraj Singh **************************** ************ ************************************************

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like We are seeking a highly motivated Product Engineer to join our Explosive Component Production team within the Explosive Technologies Group at Sandia National Laboratories. This department is responsible for the Production of explosive components, including detonators, ignitors, actuators, and other explosive components, in support of the Nuclear Deterrence mission. On any given day, you may be called on to: * Manage product definition (graphic drawings and specifications) for explosive components under development or in production * Collaborate with engineers, technologists, and project management to stand up and qualify new production capabilities for explosive components * Work with external suppliers to produce development or Mark Quality product * Engage in hands-on work in a laboratory environment, ensuring adherence to safety protocols and best practices. * Ensure product quality and design intent through technical oversight, defect investigations, and root cause analyses. * Drive continuous improvement initiatives to enhance key Production metrics. * Design and develop processes for product manufacturing, including planning sequences of operations and specifying procedures for material transformation. * Conduct tests and measurements throughout production stages to maintain control over process and product variables. * Utilize systematic problem-solving methods to drive process understanding and improvements. Occasional travel may be required. Due to the nature of the work, the selected applicant must be able to work onsite. Salary Range $102,400 - $199,700 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * A Bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development * Active DOE Q clearance, or equivalent is required to start Qualifications We Desire The ideal R&D S&E Mechanical Engineer candidate for Sandia National Laboratories will in addition possess the following: * Graduate degree in Mechanical Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation). * Experience with mechanical engineering and product realization in the NNSA complex * Strong verbal and written communication skills, ability to work effectively in multidisciplinary teams. Also, for this posting we are seeking individuals with the following experience: * Experience interfacing with and participating in Product Realization Teams * Experience with: * Working in a high-quality production environment applying rigorous processes * Installation, qualification, and maintenance of manufacturing process equipment * Methods such as resistance welding, laser welding, leak checking, visual inspection, vacuum systems, and metrology * Glass-to-metal sealing in a furnace and machining metals, glass, and ceramics * With hazardous operations and a commitment to safety in an explosives facility * Ability to: * Develop, maintain, and improve manufacturing processes, including developing fixtures and tooling * Analyze data and apply the analysis to decision-making * Knowledge of lean manufacturing principles and statistical process control * Familiarity with engineering drawings, including Geometric Dimensioning and Tolerancing (GD&T) About Our Team Department 7452, Explosive Component Production, is part of the Explosive Technologies Group (7450) and serves as the Production Agency (PA) for explosive components. Our team is responsible for the production of explosive components that support Life Extension Programs (LEPs), Alterations (ALTs), Legacy systems, and New Systems. We collaborate closely with both external suppliers and internal production floors to ensure the highest quality and efficiency in our operations. Our team plays a critical role in supporting the Nuclear Deterrence mission by ensuring the safe and efficient production of explosive components. We are dedicated to fostering a culture of safety, collaboration, and innovation, where every team member is valued and empowered to contribute to our mission. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Position requires a Department of Energy (DOE) Q security clearance to start, or equivalent active security clearance with another U.S. government agency (e.g., DOD). Sandia is required by DOE directive to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Apply for Job * Careers * Sign In * New User

**Posting Title:** Project Engineer - Data Center **Reports To:** Senior Project Manager **Salary Range:** $65,000 to $85,000 This position primarily involves working on-site at the project location or in office. Travel frequency and duration will vary depending on the role and project timeline. Final determination of a successful candidate's starting pay will vary based on a number of factors, including market location and may vary depending on job-related knowledge, skills, education and experience. The pay scale listed for this position is generally for candidates that meet the specified qualifications and requirements listed on this specific job description. We provide a competitive compensation package that recognizes your experience, credentials, and education alongside a robust benefits program to meet your needs. Our compensation reflects the cost of labor across several US geographic markets. **WHO WE ARE** For more than 70 years, Cupertino Electric, Inc. (CEI) has been powered by people who've built a reputation for delivering high-profile, complex projects. Real, tangible things that alter the landscape and improve lives. But even more than that, we've built a reputation for integrity. We're problem solvers and innovation seekers. We're team players and safety fanatics. And we always-always-do the right thing. Even when no one is looking. Because what we do here is important, but how we do it is everything. **THE DATA CENTER TEAM** We build mission-critical data centers throughout the U.S. to ensure crucial information accessed by millions of people is always available and secure. For decades, CEI is a leading provider of design, installation and commissioning of 20M+ square feet of data center space totaling over 4 GW of electrical systems-including infrastructure built to support AI-driven technologies. **ABOUT THE ROLE** We're seeking a Project Engineer ready to be on the front lines of a project--giving daily support to the field, project management, and customer teams. Our Project Engineers (PE) are vital in keeping our processes moving along and assists in the execution of project plans. This role will be responsible for specific activities such as coordinating material onsite delivery dates, maintaining RFI, submittals, and change order logs, and will serve as a key point of contact for internal customers. **_Knowledge:_** Learns to use professional concepts. Applies company policies and procedures to resolve routine issues. **_Job Complexity_** **:** Works on problems of limited scope. Follows standard practices and procedures in analyzing situations or data from which answers can be readily obtained. Builds stable working relationships internally. **_Supervision:_** Normally receives detailed instructions on all work. **ABOUT YOU** You are willing and excited to learn-with a continuous focus on cultivating a growth mindset. You bring a wide range of skills from being organized to communicating through various channels and collaborating with your team members. You are comfortable taking initiative and ownership of your work. You are not afraid to throw on a pair of boots and your protective personal equipment (PPE)-safety first! **WHAT YOU WILL GAIN** At Cupertino Electric you'll be on a career development path to project management. You'll work directly for a project manager or project executive on a team that partners with field, engineering, and design teams. It's ok if you don't have a deep understanding of electrical construction, just be ready to learn and get fired up. You'll have the opportunity to soak up knowledge from everyone you work with - from the journeyman and general foreman to the project team assigning daily tasks. In addition to on-the-job experience and mentoring from your peers, you'll attend vendor off sites, training classes, and other learning opportunities. **MINIMUM QUALIFICATIONS** _Any combination of education and experience that, in the sole judgment and discretion of Company, would likely provide the required knowledge, skills and abilities as well as possession of any required licenses or certifications may qualify._ **Education:** High School Diploma or GED required. Bachelor's Degree in Construction Management, Business, Engineering, or similar preferred. **Licensure/Certifications:** None required. **Experience:** Zero (0) years of construction or related experience required. Two (2) years of construction or related experience preferred. **Driving Record:** Valid state-issued driver's license and satisfactory driving record. _*Applicants must be authorized to work in the United States. This position is not eligible for sponsorship._ \#LI-DM1 **PLEASE NOTE:** CEI will never ask for any money or financial information from applicants during the hiring process. To learn more about "job scams" how to avoid them, click here. (******************************************** CEI is a place where every single person can-and does-have an impact on the work we do and the communities we serve. Here, you can build your own story and grow to your full potential. You can collaborate and celebrate with amazing people. And you'll go home every day knowing you helped contribute to important work that shapes people's lives. Our commercial, data center and energy projects may be complex, but our approach is simple. We build great things and we do it with great people. The job duties listed are typical examples of work performed by positions in this job classification and are not designed to contain or be interpreted as a comprehensive inventory of all duties, tasks, and responsibilities. Specific duties and responsibilities may vary depending on department, program or project needs without changing the general nature and scope of the job or level of responsibility. Employees may also perform other duties as assigned. Cupertino Electric, Inc. (CEI) is proud to be an Equal Employment Opportunity and affirmative action employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Cupertino Electric Inc. aims to make cei.com accessible to any and all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, please contact us at *************** or 1-(877)-747-4CEI. Cupertino Electric, Inc. (CEI) is proud to be an Equal Employment Opportunity and affirmative action employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law.

Kairos Power is seeking a highly motivated Senior Electron Beam Welding Engineer that will be responsible for in-house electron beam welding (EBW) capability development and technology maturation. In this role, you will work on the Welding Development team to assist in the advancement and implementation of welding and manufacturing capabilities. The candidate will partner with design, testing, materials, modeling & simulation, and reliability engineers to develop weld joint design, weld techniques, weld specifications, and inspection methods needed for welded KP-FHR and test platform assemblies. Responsibilities Procedure Development & Qualification * Design, develop, and maintain EBW procedures and supporting documentation (WPS/PQR) to meet material, joint, and quality requirements in compliance with applicable codes, standards (e.g., AWS, ASME, API), and regulatory expectations. * Develop and execute weld qualification plans, including test coupons and validation trials, in coordination with quality and materials teams * Anticipate future welding needs by aligning EBW procedures and qualification strategies with evolving product designs, manufacturing processes, and regulatory demands. Quality Assurance & Process Optimization * Oversee and review EBW inspections to verify compliance with design specifications and applicable quality standards. * Analyze weld test data to identify trends, determine root causes of defects, and implement corrective actions to enhance welding performance and reliability. * Lead continuous improvement initiatives to optimize EBW processes, increase efficiency, reduce cost, and maintain high-quality output. Collaboration & Training * Partner with design engineers, production teams, and key stakeholders to integrate EBW processes into the manufacturing workflow effectively. * Provide hands-on training and mentorship to welding technicians and operators on EBW techniques, safety protocols, and industry best practices. Technical Documentation & Reporting * Develop and maintain comprehensive technical documentation, including process instructions, work procedures, and detailed reports. * Ensure accurate recordkeeping of EBW procedures, inspection results, and quality control data to support traceability and continuous improvement. Equipment Ownership & Maintenance * Ensure performance, reliability, and availability of EBW systems, including high-vacuum chambers, beam control units, and power supplies. * Monitor and calibrate critical parameters (e.g., beam alignment, focus, power output, vacuum integrity) to maintain process consistency and compliance with specifications. * Lead maintenance and upgrade initiatives, including preventive planning, troubleshooting, vendor coordination, and system improvements to enhance automation and long-term equipment reliability. Other Duties as Assigned Qualifications * Bachelor's degree or higher in Welding Engineering, Materials Science, Mechanical Engineering, or a related technical field * Minimum 5 years of welding engineering experience, with substantial hands-on experience in EBW required * Experience with weld inspection methods, including both destructive testing and non-destructive examination (NDE) techniques * Hands-on experience working with austenitic stainless steels, carbon steels, piping systems, and pressure vessels * Experience leading cross-functional projects or mentoring junior engineers and technicians is preferred. * Experience with manual and CNC machining operations is preferred Knowledge, Skills & Abilities * Strong knowledge of EBW processes, high-vacuum systems, and high-voltage equipment operation * Proficient in reading and interpreting complex engineering and assembly drawings, including weld symbols and geometric dimensioning & tolerancing (GD&T) * Familiarity with ASME Boiler and Pressure Vessel Code and AWS structural welding standards * Skilled in using CAD software such as SolidWorks for part modeling and drawing generation * Proficient with computers and digital tools used in technical documentation, data analysis, and process development * Familiarity with the calibration, preventive maintenance, and troubleshooting of EBW systems and associated instrumentation. * Strong problem-solving skills and ability to drive continuous improvement through data-driven analysis and collaboration * Proven ability to manage multiple priorities in a fast-paced, agile manufacturing or development environment * Excellent verbal and written communication skills; able to collaborate effectively across engineering, production, and quality teams * Ability to collect, manage, and transfer technical knowledge across teams or documentation systems * Committed to fostering a safe, inclusive, and high-performing workplace * Ability to work with highly collaborative team. * Ability to solve problems quickly and efficiently. * Prioritizes and ensures safety of oneself and others. * Ability to seek different and novel ways to create efficiencies when working on problems, challenges and issues. Physical Demands * Ascending or descending ladders, stairs, scaffolding, ramps, scissor lifts, articulated boom lifts and the like * Setting up and transferring temporary structures (e.g. scaffolding, ladders) * Moving self in different positions to accomplish tasks in various environments including tight and confined spaces * Remaining in a stationary position, often standing, or sitting for prolonged periods * Moving about to accomplish tasks or moving from one worksite to another * Adjusting, moving, transporting, installing, positioning, or removing objects up to 50 pounds in all directions * Communicating with others to exchange information * Operating motor vehicles, heavy equipment or machinery * Use hand tools * Repetitive assembly operations of manufacturing test fixtures and test setups in collaboration with engineering and manufacturing teams Environmental Conditions * Low temperatures * High temperatures * Outdoor environment or elements such as precipitation and wind * Noisy environments * Small and/or enclosed spaces * Odors or fumes from chemicals or chemical reactions * Elevated heights * Accessing the accuracy, neatness and thoroughness of the work assigned * High-concentration, demanding and fast-paced * General office environment * Manufacturing/Industrial Environment Safety and PPE * Reading and interpreting hazardous warning signs * Wearing proper PPE, to include face mask, face shields, gloves, safety shoes, etc. * Reporting issues with equipment or unsafe conditions Travel * Some travel may be required (up to 20%) to other Kairos Power offices or external suppliers Additional Requirements * Occasionally requires overtime * Occasionally requires working weekends * Occasionally requires schedule flexibility * Occasionally requires non-standard work-week hours * Occasionally requires extended hours to support launch and critical project timelines #LI-Onsite

a.i. solutions is looking for a highly-motivated Systems Engineer with a passion for aerospace. This person will work in a team environment as the primary customer point of contact for spacecraft operations engineering activities working on the Prototype Operations-I (POPS-I) contract in support of U.S. Space Force Space Systems Command's Innovation and Prototyping Delta at Kirtland AFB, NM. This individual will serve as a key leader on the program and will provide engineering expertise and leadership to fulfill customer operational engineering requirements. The successful candidate should possess significant knowledge of space operations engineering, ground systems engineering, training, and satellite command and control. The successful candidate will demonstrate the ability to embrace the a.i. solutions mission of always meeting customer requirements and striving to exceed their expectations. Essential Roles & Responsibilities: Responsible for leading and/or participating in space mission Pre-Launch, L&EO, and On-Orbit operations activities, to include mission exercises and rehearsals, in the capacity of mission lead, evaluation engineer, or senior operator as assigned Obtain certification as a space mission operations engineer on multiple experimental satellite missions Support system readiness, planning, preparation, execution and ops crew evaluation for satellite launch and early orbit operations, on-orbit operations, and end-of-life retirement/disposal Provide recommendations and advice to program leadership regarding satellite faults, ground system failures, or operator errors Lead engineering reviews and participate in engineering boards and configuration boards, both internally and with the government customer Create engineering test plans and products, as well as assist in development and review of operational procedures developed by program mission lead personnel Directly interface with program management, cross-functional program stakeholders, suppliers, customers, team members and government representatives and manage effective communications among them, to include providing engineering project or mission status as required Develop long-term strategic roadmap for operational engineering and test objectives Promote corporate culture and foster an environment of collaboration, innovation, and professional development within the team Perform personnel management/supervisory actions as required, including timekeeping administration, performance reviews, assisting in hiring personnel, and assisting team with professional development Identify and develop opportunities for technical or business process improvement Develop relationships with the customer and team members to ensure delivery of our corporate promise and overall successful mission support Participate in corporate initiatives and business development, opportunity capture, and/or proposal generation efforts Support flexible hours including potential night and weekend work on an on-call basis Travel on occasion as required, estimated to be 10% Minimum Qualifications: Bachelor's Degree in engineering, management or related discipline, or equivalent experience 7 years of directly related experience in space operations, space engineering, or ground systems engineering Experience with Quality Management Systems TS clearance with SCI eligibility U.S. citizenship Desired Background: Master's degree in engineering or technical field Extensive space operations and space engineering experience Strong personnel management/supervisory experience Proven leadership experience in a technical field MAKE A MOVE, MAKE AN IMPACT. a.i. solutions was founded over 25 years ago with a mission to MAKE AN IMPACT by exceeding expectations. A move to our team means using your passion and ingenuity to MAKE AN IMPACT through innovations, defending national security, and enabling access to space. MAKE A MOVE, to join a team driven by a shared ambition, and rewarded for individual contributions. BENEFITS THAT MAKE AN IMPACT: Salary ranges from $110,000 to $135,000 depending on relevant experience and qualifications View Our Benefits Offerings Paid Time Off and Holidays 401k Safe Harbor Plan, we contribute on Day #1 Paid Parental leave for Mom & Dad Company Paid Life/AD&D Tuition Assistance Wellness plans that reward wellbeing & work life harmony

Job Description Fisher Industries is a vertically integrated family of businesses that provides heavy civil construction and aggregate products across the United States. With over 70 years of experience, the company specializes in highways, bridges, aggregates, and large-scale infrastructure projects, supported by in-house capabilities in drilling, blasting, crushing, asphalt, and concrete production. Fisher is committed to delivering innovative, cost-effective solutions with an emphasis on safety and quality. As a proven industry leader, Fisher Industries continues to grow while maintaining the integrity and values of a family-owned company. For additional information about our company, visit our website at ***************** POSITION SCOPE The Project Engineer will be responsible for planning, developing, coordinating and managing onsite construction activities for heavy civil construction projects to ensure quality and cost. This position will be a travelling position where the qualified applicant will be required to integrate and travel with a project team or paving crew to assist with all the functions of the project. The individual must be able to multi-task and work in a fast-paced environment. Some night and weekend work will be required. Traveling is required for this position. $1,500 Sign-On Bonus! * Bonuses Payable following 90 days of employment PRIMARY DUTIES Manage job controls to ensure compliance with contract, budget, schedule, forecasting and job costing Supervise, direct, and assist project staff to ensure individual development and that project standards are met, and work is completed on time and under budget Develop and maintain project schedule and daily costs to ensure work is completed on time and under budget Provide technical support in construction planning, quality control, application of construction methods, resolution and documentation of design conflicts, and constructability reviews to ensure successful job completion Represent company during client and project management meetings to ensure effective communication Develop and maintain all material and submittal logs Review, analysis, management, and resolution of field coordination issues within project team Interpret project plans, specifications, and details for subcontractors and craft people Perform other duties as assigned REQUIREMENTS Bachelor's Degree in Civil Engineering, Construction Management or related field preferred, or equivalent combinations of technical training and related experience 7+ years of construction estimating support, engineering, field support, or similar experience Proficiency with Blue Beam and OST preferred but not required Proficiency with Heavy Job and HCSS preferred but not required Valid driver's license and acceptable MVR in accordance with Company Vehicle Program Ability to pass a pre-employment drug test Ability to complete work tasks under various adverse weather conditions including heat above 100 degrees, cold, and rain MUST BE WILLING TO TRAVEL Fisher Industries is an Equal Opportunity Employer. We are a drug-free work environment requiring pre-employment and random drug testing. Subject to background check. If you require an accommodation with applying, please email ******************** or call the HR Department at ************** to request accommodations. This email is only to request accommodation for the application process and is not an email to inquire about the status of your application. Job Posted by ApplicantPro

At AV we provide a full suite of exquisite, space-qualified hardware trusted to fly in the most extreme environments space presents across GEO, MEO, LEO and Cislunar orbits. With hundreds of systems flying in space, our customers turn to AV when a mission can't fail. Our team is expanding to do the big things that have never been done before - the things the nation and the world are counting on us to deliver. Join the transformation and help us make this impact now. JOIN US FOR OUR INVITATION-ONLY HIRING EVENT ON FEBRUARY 24. APPLY TODAY TO BE CONSIDERED FOR THIS SPECTACULAR EVENT. We are seeking electrical engineers at all levels. The selected candidates will join a dynamic team working to put Great Systems on Orbit with capabilities to perform leading edge tasks in laser communications, space electronics and sensors. On any given day, the successful candidates may be asked to perform the following duties: Design custom high speed digital electronics including the use of ADCs, DACs, FPGAs, processors, and communications drivers. Design, and conduct analysis of, analog circuits including low-noise signal conditioning and power amplifiers. Provide expertise to both product development and R&D efforts. Collaborate with peers, leads, and managers to develop, review, and refine designs and analyses to meet program technical needs within defined time and budget constraints. Work within a broad-disciplined program team providing expertise in support of electronics manufacturing and test. Required Qualifications: Bachelor's degree in electrical engineering 2 years' experience in design, analysis, integration, and test of custom electronics. Proficiency in electrical design software and simulation tools (such as Altium, SPICE, MATLAB, Simulink, HyperLynx, and MS Office). Ability to conduct circuit analysis and simulation to optimize performance and reliability. Ability to obtain and maintain a US security clearance. Desired Qualifications: Understanding of space qualification standards and requirements. Experience designing custom electronics for space products. Experience designing to a defined requirements set. Experience with analysis necessary for high reliability space electronics hardware (Electrical stress analysis, worst case circuit analysis and reliability analysis) Experience and understanding of PCB manufacturing and assembly processes. Experience producing board layouts is a plus Understanding of relevant IPC standards needed for electrical design and fabrication. Experience leading sub-assemblies or circuit card designs with small teams of two or three. Experience developing and conducting testing of complex electronic sub-assemblies along with design of special test equipment (STE). Experience deriving sub-assembly requirements from higher-level, flowed down, system requirements and defining test methodologies. Experience developing design & verification documentation (Interface Control Document/Drawings (ICD), Design Description Document (DDD), Test Plan, Test Procedures, Test Reports, etc.). Written and verbal communication skills necessary to present designs to internal and external stakeholders. Able to complete assigned work within a defined timeline and budget. Clearance Level No Clearance ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR

Collabera is ranked amongst the top 10 Information Technology (IT) staffing firms in the U.S., with more than $525 million in sales revenue and a global presence that represents approximately 12,000+ professionals across North America (U.S., Canada), Asia Pacific (India, Philippines, Singapore, Malaysia), and Europe (Ireland, Netherlands, Poland, United Kingdom). We support our clients with a strong recruitment model and a sincere commitment to their success, which is why more than 75% of our clients rank us amongst their top three staffing suppliers. Not only are we committed to meeting and exceeding our customer's needs, but also are committed to our employees' satisfaction as well. We believe our employees are the cornerstone of our success and we make every effort to ensure their satisfaction throughout their tenure with Collabera. As a result of these efforts, we have been recognized by Staffing Industry Analysts (SIA) as the “Best Staffing Firm to Work For” for five consecutive years since 2012. Collabera has over 50 offices across the globe with a presence in ten countries and provides staff augmentation, managed services and direct placement services to global 2000 corporations. For consultants and employees, Collabera offers an enriching experience that promotes career growth and lifelong learning. Visit ***************** to learn more about our latest job openings. Awards and Recognition --Staffing Industry Analysts: Best Staffing Firm to Work For (2016, 2015, 2014, 2013, 2012) --Staffing Industry Analysts: Largest U.S. Staffing Firms (2016, 2015, 2014, 2013) --Staffing Industry Analysts: Largest Minority Owned IT Staffing Firm in the US. Job Description A Fortune 100 aerospace giant hiring Manufacturing engineer responsible for supporting New Product Introduction (NPI) including planning and execution of new production line start up for avionics. The successful candidate would be coordinating with suppliers and engineering to analyze layout of equipment, workflow, assembly methods, and capacity. Position details: Client: Fortune 100 aerospace giant Job Title: Manufacturing engineer Location: Albuquerque, NM 87113 Job Summary: · Analyze BOM's and develops cost reduction strategies and initiatives with engineering early in the development cycle and oversees all aspects of execution. · Responsible for all aspects of manufacturability assessments by ensuring product complexity analysis is completed and design engineering has simplified: Bill of Materials, process, tooling, and assembly labor. · Position also is responsible to ensure obsolescence strategies have been developed prior to entry into production. · Role is heavily responsible for in depth cross organization coordination between all functional organizations. Role is expected to be able to develop in depth manufacturing plans. · Able to lead workshops in cost reduction, DFx, or DFm. Qualifications · Requires a bachelor's degree in engineering or equivalent industry experience and 2-4 years of experience in the field or in a related area. · Strong skills with excel, PowerPoint, Visio. · Lean Six Sigma or Black Belt skills. · Prior manufacturing experience planning new product introduction of circuit board assemblies or box build assemblies at a contract manufacturer. Additional Information If you want to know more and apply, please connect with: Niraj Singh **************************** ************ ************************************************

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like We are seeking a highly skilled and motivated engineer with a strong background in navigation analysis and sensor fusion. The ideal candidate will possess extensive experience in applying advanced techniques in covariance analysis and Monte Carlo methods to develop, evaluate and enhance real-time navigation systems. They will have a deep understanding of Kalman Filter design and implementation, along with a proven ability to derive and develop algorithms that solve complex engineering challenges of national security significance. On any given day, you may be called on to: * Develop innovative Navigation and Estimation algorithms from first principles to improve modeling and simulation analysis tools and real-time embedded flight software * Integrate new sensors models, interfaces and other capability upgrades for flight software and analysis tools using modern testing and configuration management procedures * Perform navigation and estimation analysis on simulated and/or flight collected data * Document algorithm, software, and analysis results in white papers, presentations, and other data products * Collaborate and coordinate with internal and external organizations and team members to execute project tasks and milestones Salary Range $102,400 - $199,700 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * A bachelor's degree in a relevant discipline or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development. * Ability to be granted a DOE Q clearance Qualifications We Desire The ideal Electrical Engineering candidate for Sandia National Laboratories will in addition possess the following: * Graduate degree in Electrical Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation). * Ability to work independently and collaborate well in a multidisciplinary team of designers and test engineers. * Outstanding verbal and written skills, including the ability to develop and present briefings that are clear and compelling. Also, for this posting we are seeking individuals with the following experience: * Demonstrated knowledge of sensor fusion techniques, particularly Kalman Filters and multivariable multiplicative state estimation. * Working knowledge of six degrees of freedom dynamic modeling and analysis, including both translational and rotational motion, with the ability to derive dynamic equations of motion from first principles. * Understanding of inertial navigation techniques and Inertial Measurement Unit (IMU) sensor technology. * Experience with vehicle trajectory and navigation analysis techniques, such as covariance and Monte Carlo analysis. * Experience modeling and simulating aerospace and dynamic systems in MATLAB and C/C++. * Demonstrated knowledge of object-oriented programming methods and practices, software development processes, unit testing, and requirements verification. * Knowledge of Global Positioning System (GPS) and other Global Navigation Satellite Systems (GNSS) technologies, principles, and signal processing techniques. * Experience with navigation sensor hardware interfaces, data acquisition, and analysis; examples include GPS/GNSS, odometers, altimeters, IMUs, cameras, LIDAR, radio frequency beacons, etc. * Experience with developing, implementing, and testing control algorithms on electromechanical systems. * Demonstrated experience in deriving and implementing numerical algorithms and performing quantitative engineering analysis About Our Team The 5324 Navigation, Pointing, and Control (NPC) Motion Systems Department develops advanced real-time NPC solutions and performs navigation system and thermal, vibration, and shock analysis for projects critical to national security. We collaborate across Sandia National Labs, supporting efforts in modeling and simulation, sensor characterization, trajectory reconstruction, and avionics and electro-mechanical design, testing, and integration. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Apply for Job * Careers * Sign In * New User

Kairos Power is a new nuclear energy technology and engineering company whose mission is to enable the world's transition to clean energy, with the ultimate goal to dramatically improve people's quality of life while protecting the environment. This goal will be accomplished through the commercialization of the fluoride-salt-cooled, high-temperature reactor (FHR) that can be deployed with robust safety, affordable costs, and flexible operation to accommodate the expansion of variable renewables. Job Summary Kairos Power is seeking a highly motivated Senior Electron Beam Welding Engineer that will be responsible for in-house electron beam welding (EBW) capability development and technology maturation. In this role, you will work on the Welding Development team to assist in the advancement and implementation of welding and manufacturing capabilities. The candidate will partner with design, testing, materials, modeling & simulation, and reliability engineers to develop weld joint design, weld techniques, weld specifications, and inspection methods needed for welded KP-FHR and test platform assemblies. Responsibilities Procedure Development & Qualification Design, develop, and maintain EBW procedures and supporting documentation (WPS/PQR) to meet material, joint, and quality requirements in compliance with applicable codes, standards (e.g., AWS, ASME, API), and regulatory expectations. Develop and execute weld qualification plans, including test coupons and validation trials, in coordination with quality and materials teams Anticipate future welding needs by aligning EBW procedures and qualification strategies with evolving product designs, manufacturing processes, and regulatory demands. Quality Assurance & Process Optimization Oversee and review EBW inspections to verify compliance with design specifications and applicable quality standards. Analyze weld test data to identify trends, determine root causes of defects, and implement corrective actions to enhance welding performance and reliability. Lead continuous improvement initiatives to optimize EBW processes, increase efficiency, reduce cost, and maintain high-quality output. Collaboration & Training Partner with design engineers, production teams, and key stakeholders to integrate EBW processes into the manufacturing workflow effectively. Provide hands-on training and mentorship to welding technicians and operators on EBW techniques, safety protocols, and industry best practices. Technical Documentation & Reporting Develop and maintain comprehensive technical documentation, including process instructions, work procedures, and detailed reports. Ensure accurate recordkeeping of EBW procedures, inspection results, and quality control data to support traceability and continuous improvement. Equipment Ownership & Maintenance Ensure performance, reliability, and availability of EBW systems, including high-vacuum chambers, beam control units, and power supplies. Monitor and calibrate critical parameters (e.g., beam alignment, focus, power output, vacuum integrity) to maintain process consistency and compliance with specifications. Lead maintenance and upgrade initiatives, including preventive planning, troubleshooting, vendor coordination, and system improvements to enhance automation and long-term equipment reliability. Other Duties as Assigned Qualifications Bachelor's degree or higher in Welding Engineering, Materials Science, Mechanical Engineering, or a related technical field Minimum 5 years of welding engineering experience, with substantial hands-on experience in EBW required Experience with weld inspection methods, including both destructive testing and non-destructive examination (NDE) techniques Hands-on experience working with austenitic stainless steels, carbon steels, piping systems, and pressure vessels Experience leading cross-functional projects or mentoring junior engineers and technicians is preferred. Experience with manual and CNC machining operations is preferred Knowledge, Skills & Abilities Strong knowledge of EBW processes, high-vacuum systems, and high-voltage equipment operation Proficient in reading and interpreting complex engineering and assembly drawings, including weld symbols and geometric dimensioning & tolerancing (GD&T) Familiarity with ASME Boiler and Pressure Vessel Code and AWS structural welding standards Skilled in using CAD software such as SolidWorks for part modeling and drawing generation Proficient with computers and digital tools used in technical documentation, data analysis, and process development Familiarity with the calibration, preventive maintenance, and troubleshooting of EBW systems and associated instrumentation. Strong problem-solving skills and ability to drive continuous improvement through data-driven analysis and collaboration Proven ability to manage multiple priorities in a fast-paced, agile manufacturing or development environment Excellent verbal and written communication skills; able to collaborate effectively across engineering, production, and quality teams Ability to collect, manage, and transfer technical knowledge across teams or documentation systems Committed to fostering a safe, inclusive, and high-performing workplace Ability to work with highly collaborative team. Ability to solve problems quickly and efficiently. Prioritizes and ensures safety of oneself and others. Ability to seek different and novel ways to create efficiencies when working on problems, challenges and issues. Physical Demands Ascending or descending ladders, stairs, scaffolding, ramps, scissor lifts, articulated boom lifts and the like Setting up and transferring temporary structures (e.g. scaffolding, ladders) Moving self in different positions to accomplish tasks in various environments including tight and confined spaces Remaining in a stationary position, often standing, or sitting for prolonged periods Moving about to accomplish tasks or moving from one worksite to another Adjusting, moving, transporting, installing, positioning, or removing objects up to 50 pounds in all directions Communicating with others to exchange information Operating motor vehicles, heavy equipment or machinery Use hand tools Repetitive assembly operations of manufacturing test fixtures and test setups in collaboration with engineering and manufacturing teams Environmental Conditions Low temperatures High temperatures Outdoor environment or elements such as precipitation and wind Noisy environments Small and/or enclosed spaces Odors or fumes from chemicals or chemical reactions Elevated heights Accessing the accuracy, neatness and thoroughness of the work assigned High-concentration, demanding and fast-paced General office environment Manufacturing/Industrial Environment Safety and PPE Reading and interpreting hazardous warning signs Wearing proper PPE, to include face mask, face shields, gloves, safety shoes, etc. Reporting issues with equipment or unsafe conditions Travel Some travel may be required (up to 20%) to other Kairos Power offices or external suppliers Additional Requirements Occasionally requires overtime Occasionally requires working weekends Occasionally requires schedule flexibility Occasionally requires non-standard work-week hours Occasionally requires extended hours to support launch and critical project timelines #LI-Onsite About our Benefits We know that we have some of the most talented and dedicated employees, and we believe in rewarding them accordingly. If you work here, full-time employees (excludes interns) expect to have access to the benefits below: Competitive compensation packages Medical, dental and vision benefits for employees and their dependents Paid Vacation 401(k) and pre-tax health insurance, dependent care, and commuter benefits (FSA) Kairos Power is committed to building a diverse workforce that reflects the communities where we do business. Kairos Power is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. We actively welcome people of different experiences, abilities, and perspectives. Kairos Power participates in E-Verify. Candidates only, no recruiters or agencies please. Note: You are applying for a position that is located in a facility that handles information that is subject to export control restrictions by the Department of Energy under 10 CFR Part 810. To work in this facility, you need to be authorized by the Department of Energy to access Part 810-controlled information. Foreign nationals who are citizens of countries that are not on the Department of Energy's general authorization list (link below) are not permitted to work in our facility unless the Department of Energy issues an export control license to the company to permit that individual to have access to Part 810-controlled information. The following questions are intended to determine the licensing requirements that may apply. **************************************************************

At AV we provide a full suite of exquisite, space-qualified hardware trusted to fly in the most extreme environments space presents across GEO, MEO, LEO and Cislunar orbits. With hundreds of systems flying in space, our customers turn to AV when a mission can't fail. Our team is expanding to do the big things that have never been done before - the things the nation and the world are counting on us to deliver. Join the transformation and help us make this impact now. JOIN US FOR OUR INVITATION-ONLY HIRING EVENT ON FEBRUARY 24. APPLY TODAY TO BE CONSIDERED FOR THIS SPECTACULAR EVENT. AV seeks a skilled Senior FPGA Engineer to join a multi-disciplinary team within the SpaceTech division. This role focuses on developing high-performance digital systems for electromechanical, electro-optical, control, and communication solutions, utilizing SoC, FPGA, GPP, and microcontroller architectures. The successful candidate will be responsible for end-to-end firmware development and validation for space electronics: Design & Development: Architect and implement mission-specific and general-purpose firmware for FPGAs, microcontrollers, and RTOS-based systems. Develop and maintain firmware for standard and specialized peripheral interfaces, including: Analog-to-Digital (ADC) and Digital-to-Analog (DAC) Converters. Serial communication links (e.g., SpaceWire, SPI, CameraLink, 1Gb+ Ethernet, MIL-1553B). Optimize embedded software for radiation-hardened and high-reliability space environments. Develop and maintain automated build scripts (TCL) for the FPGA firmware platform. Integration & Validation: Conduct rigorous system integration, testing, and validation of firmware in simulated and real-world aerospace conditions. Deploy and verify firmware functionality on physical hardware devices. Collaborate closely with hardware and software engineers to ensure seamless system functionality. Ensure technical compliance with relevant space industry standards (e.g., NASA, ESA, MIL-STD). Required Qualifications Bachelor's degree in electrical engineering, computer engineering, or computer science. FPGA Platforms: Two years' experience using and implementing designs on: Xilinx devices (Zynq, Virtex, Kintex) and toolchains (Vivado, ISE). Microchip devices (RTAX, ProASIC, RTG4) and toolchains (Libero). Experience in embedded systems firmware development, preferably for aerospace or space applications. Six years of experience designing with Hardware Description Languages (VHDL or Verilog). Proven experience successfully taking VHDL or Verilog designs from concept to physical hardware implementation. Expertise in digital design techniques, including multiple clock-domain management. Proficient with in-system debuggers and logic analyzers. Experience with Tool Command Language (TCL) for script automation. Experience designing and managing FPGA physical constraints. Ability to obtain and maintain a US security clearance. Desired Qualifications Knowledge of RTOS, bare-metal firmware, and hardware-software co-design principles. Familiarity with modern verification techniques (e.g., linting and constrained random testing). Familiarity with Xilinx SoC devices, FPGA floorplanning, Xilinx System Generator, hardware accelerators, and space communication protocols. Familiarity with C/C++, Python, or Java for embedded software or scripting tasks. Familiarity with alternative synthesis and simulation environments (Synopsys, Aldec). Current and active security clearance. Clearance Level No Clearance ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like Are you passionate about Electrical Engineering and eager to utilize state-of-the-art facilities to tackle ambitious challenges related to national security? We are seeking multiple Electrical Engineers with experience in analog or digital circuit design to join our teams. The selected applicants will be responsible for designing, developing, testing, qualifying, and monitoring firing subsystems and other high-consequence embedded systems that are used daily in U.S. Navy and U.S. Air Force nuclear weapons programs, as well as other national security programs. On any given day, one may be called upon to: * Collaborate on multidisciplinary teams, providing ownership and direction for electrical designs. * Coordinate with customers, production agencies, and stakeholders to support design, testing, development, qualification, and production activities * Analyze performance against requirements, build prototypes, and refine designs * Perform modeling and simulation of design performance using tools such as Pspice, LTspice and MATLAB/Simulink * Communicate technical information and project status effectively to team members, customers, and management Applicants on this requisition may be interviewed by multiple organizations at Sandia National Laboratories. Travel to partner and customer locations as required (generally less than 5 days per month). Applicants chosen for an interview will be asked to provide an overview briefing of an example that illustrates relevant design experience. Due to the nature of the work, the selected applicant must be able to work onsite. Salary Range $99,400 - $193,600 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * A Bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development. * Ability to obtain and maintain a DOE Q clearance * Ability to obtain and maintain Sigma 15 access Qualifications We Desire The ideal R&D S&E Electrical Engineer candidate for Sandia National Laboratories will in addition possess the following: * Graduate degree in Electrical Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation) * Ability to work independently and collaborate well in a multidisciplinary team of designers and test engineers * Outstanding verbal and written skills, including the ability to develop and present briefings that are clear and compelling Also, for this posting we are seeking individuals with the following experience: * Experience with high voltage electronics * The ability to acquire and maintain qualifications for working safely with high voltage electronics * Experience working in Nuclear Deterrence mission spaces including design, development, production, or surveillance * Experience working in a production or manufacturing environment * Demonstrated attention to detail * An active DOE Q-level security clearance; or other equivalent active security clearance such as DOD Top Secret with CNWDI About Our Team The Firing & Embedded Systems group (7620) is a recognized leader in realizing safe, secure, and reliable products. We research, design, develop, and deliver highly reliable, trusted systems and high consequence hardware and software products to serve our National Security customers today, tomorrow, and always. Our technical backgrounds are diverse. Some of us have spent years focusing on the fine details of particular technologies and are recognized as nation-level specialists. Some of us are generalists and support multiple projects keeping things connected and developing new skills. Our teams are comprised of specialists and generalists working together, and it is easy to shift between projects and technical roles over time. If this environment sounds appealing, we d like to meet you! Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Apply for Job * Careers * Sign In * New User