Staff engineer jobs in Saint Louis, MO - 1,716 jobs

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense, Space & Security (BDS) - Phantom Works organization is seeking a seasoned Low Observables (LO) Design & Integration Engineer to lead design and analysis activities supporting the fabrication and test of an RCS pole model. The successful candidate will apply deep expertise in LO materials, integration, manufacturing, computational electromagnetic (CEM) modelling, and test support to design, build and test a representative pole model for an advanced next generation program in the St. Louis region. Key Responsibilities: Lead detailed LO design and integration for the RCS pole model, including material selection, incorporation of advanced technologies, supplier hardware integration. Use computational electromagnetic solvers to model, analyze, and optimize radar cross section (RCS) and scattering behavior across required frequency bands and aspect angles in support of pre-test predictions and diagnostics. Work with Manufacturing to ensure proper alignment between design, analysis and fabrication of LO components. Define and support fabrication processes, QA checks, and build plans for LO skins, coatings, RAM treatments, and attachments; identify and mitigate manufacturability risks, provide LO liaison support to the shop. Develop and execute test plans for RCS characterization (anechoic chamber and outdoor ranges), including instrumentation, calibration, and measurement repeatability considerations. Prepare and execute data processing workflows to reduce, calibrate, and analyze measured RCS and related EM test data; combine simulation and measurement data for validation and design iteration. Produce clear technical documentation: design descriptions, analysis reports, test plans, test reports, procedures, and presentation materials for program reviews. Mentor junior engineers and support continuous improvement of LO design, test, and data processing practices. Working Conditions and Physical Requirements: Hands-on support in fabrication or test setups may be required. Will require travel to other company locations, supplier facilities, fabrication shops, and test ranges (including anechoic chambers and outdoor ranges). This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering, Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 7+ years of professional experience working with low observable materials and technologies, including hands-on exposure to LO integration, design, manufacturing, and test. Demonstrated experience using computational electromagnetic solvers (e.g., FEKO, HFSS, CST, WIPL-D, CARLOS, SENTRI, XPATCH or equivalent) for design and optimization of LO systems and RCS predictions. Strong understanding of electromagnetic principles relevant to scattering, phenomena and Radar Cross Section. Proven track record supporting fabrication and testing of LO components/assemblies and correlating measurements to models. Proficiency in data processing and analysis of RCS/EM test data, including calibration, clutter and background rejection, and data visualization techniques. Excellent technical writing skills with experience producing engineering reports, test plans, and test reports. Effective verbal communication and collaboration skills; ability to lead technical discussions and interface with suppliers, customers, leadership and test facility personnel. Ability to obtain a Top Secret clearance and Special Program Access (US Only Citizenship required) Preferred Qualifications (Desired Skills and Experience): Advanced degree (MS/PhD) in a relevant discipline. Past experience with RCS pole models, and range testing. Experience with material characterization techniques. Knowledge of LO materials and application processes, as well as nondestructive inspection methods for LO components. Familiarity with CAD tools and integration with CEM workflows. Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $136,850- $185,150 Applications for this position will be accepted until Jan. 21, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Contingent Upon Program Reward The position is contingent upon program award Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Senior Mechanical Engineer We are seeking a highly skilled Senior Mechanical Engineer to join our dynamic engineering team. The ideal candidate will be responsible for leading design and development projects, utilizing advanced engineering principles to create innovative solutions for complex mechanical systems. Key Responsibilities Lead the design and development of mechanical systems and components using SolidWorks. Conduct Finite Element Analysis (FEA) to ensure product reliability and performance. Manage product development projects from concept through to production, ensuring timelines and objectives are met. Perform engineering analysis to evaluate designs and improve performance metrics. Collaborate with cross-functional teams to develop prototypes and iterate designs based on testing feedback. Generate and maintain technical documentation for all projects and designs. Analyze manufacturing processes to optimize production efficiency and cost-effectiveness. Conduct stress analysis to ensure product durability under various operating conditions. Advise on materials selection based on engineering principles and project requirements. Provide mentorship and guidance to junior engineers and interns. Qualifications Bachelor's degree in Mechanical Engineering or related field. A minimum of 5 years of experience in mechanical design and product development. Proficient in SolidWorks and other CAD software. Strong knowledge of Finite Element Analysis (FEA) techniques. Experience with thermodynamics and materials science principles. Familiarity with manufacturing processes and prototyping techniques. Excellent project management skills and ability to lead teams effectively. Strong problem-solving skills and attention to detail. Excellent written and verbal communication skills. Benefits Health, Dental, and Vision Insurance Employee Stock Ownership Program 401K w/ Company Contributions Yearly Bonus Gym Reimbursement Tuition Reimbursement Paid Time Off/Sick Leave Holidays Off Parental Leave Email Your Resume In Word To Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply, but you may also: josh.ortiz@cybercoders.com Please do NOT change the email subject line in any way. You must keep the JobID: linkedin : LB6-1840795L725 -- in the email subject line for your application to be considered.*** Josh Ortiz - Recruiting Manager For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 02/13/2025 and applications will be accepted on an ongoing basis until the position is filled or closed. CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at Benefits@CyberCoders.com to make arrangements.

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. The Role We Want You For The Senior Project Engineer will be responsible for taking projects from conceptual stages through closeout within the Life Sciences/Biotech/Pharmaceuticals sector. You will provide high level support to the project staff to ensure quality and timely execution of design-build projects from design to completion. These phases include: Scheduling, subcontractor buyout, cost reporting, preparation of subcontracts, the handling of owner coordination, construction quality oversight, and project closeout. You may run smaller projects on your own, mentor Project Engineers, Summer Construction Interns, and take on the additional responsibilities to become a Project Manager. The Specifics of the Role Participate with project team and preconstruction services in development of a Project Chart of Accounts. Coordinate with Project Superintendent in development of a project site logistics plan. Assist Superintendent in the management of subcontractors. Maintain understanding of the Clayco/Owner contract. Oversee the submittal, change order, and pay request process. Assist in generation of project costs and Job Cost Report. Contribute to the analyzing and forecast of quarterly Total Cost Projection reports. Monitor and record training of all staff personnel. Monitor project labor. Report and track equipment needs. Assist preconstruction services in bidding projects. Implement applicable safety, EEO, and Affirmative Action programs. Participate in the project's quality process. Contribute to schedule and project close-out processes. Requirements Bachelor's Degree in Construction Management, Engineering, Architecture or related. 3-7 years of experience managing construction projects ($5+ million) ideally design-build. Demonstrated knowledge of construction principles, practices, and technology. Previous experience leading a successful project management team. Ability to walk a job site, climb ladders, and scale multi-floor scaffolding. Ability to lift objects of at least 50 lbs. Some Things You Should Know This position will service our clients in St. Louis, MO. Our clients and projects are nationwide - Travel will be required. No other builder can offer the collaborative design-build approach that Clayco does. We work on creative, complex, award-winning, high-profile jobs. The pace is fast! This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing. Why Clayco? 2025 Best Places to Work - St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal. 2025 ENR Midwest - Midwest Contractor (#1). 2025 ENR Top 100 Design-Build Firms - Design-Build Contractor (Top 5). 2025 ENR Top 100 Green Contractors - Green Contractor (Top 3). 2025 ENR Top 25 Data Center Builders - Data Center Contractor (Top 3). Benefits Discretionary Annual Bonus: Subject to company and individual performance. Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

ACME Constructors Inc. | St. Louis, MO Employment Type: Full-time, In-Office Why Join Our Team? We are a 100% employee-owned (ESOP) company, which means you can build wealth and benefit directly from our shared success. Our culture is built on a foundation of collaboration, accountability, and excellence. We also offer a comprehensive benefits package, including: Competitive Compensation: Starting at $70,000 annually, based on experience Annual performance-based bonus Weekly pay Comprehensive Benefits: 401K with a 4% employer match Medical, Dental, and Vision insurance Employer-paid Life, AD&D, Short-Term, and Long-Term Disability Voluntary Accident Insurance Employee Assistance Program Generous Paid Vacation & Holidays About ACME Constructors Since 1947, we have been a leader in industrial construction, serving Fortune 500 and privately held companies across diverse industries. Our success is built on a commitment to safety and superior project management. With over 700 projects annually and three Missouri locations, we are a team of customer-driven, positive, and hardworking individuals with an entrepreneurial spirit. Our employee-owned structure fosters a deep sense of community and collaboration. About the Role We are looking for a proactive Project Engineer to assist with the planning, coordination, and execution of construction projects. This is a vital, full-time, in-office role that requires working closely with Project Managers and field teams to ensure projects are completed on time, within budget, and to the highest standards of safety and quality. Responsibilities Assist with project planning and scheduling. Review project plans and specifications. Manage technical documentation (submittals, RFIs, change orders). Perform quality control inspections. Support the procurement of materials and equipment. Provide technical support to construction teams. Assist in managing project costs and budgets. Qualifications Experience: Minimum of 2 years of experience in construction engineering or project management is preferred. Knowledge of construction processes and project management practices. Skills: Excellent communication, organizational, and problem-solving skills. Ability to work effectively in a team environment. Detail-oriented and able to manage multiple tasks simultaneously. Technical: Proficiency with Procore, CMIC, Microsoft Project, Bluebeam and the Microsoft Office Suite (Excel, Word, PowerPoint). Education: Bachelor's degree in Civil Engineering, Construction Management, or a related field. Professional Engineering (PE) license or working toward certification is a plus. READY TO APPLY? To apply, take the next step and share your resume with us. All inquiries, resumes and referrals shared are held in strict confidence. For questions and more information, contact ****************************. ACME is an Equal Opportunity Employer. We welcome differences in form of gender, race, ethnicity, disability, geography, socioeconomic status, age, politics, religion, philosophy, sexual orientation, gender identity or expression and veteran status. All applicants who share this goal are encouraged to apply-we look forward to hearing from you!

Important Notice: This is a senior-level, direct-hire Electrical Engineer position requiring professional experience in the United States. Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. Applicants must have a Bachelor's degree in Electrical Engineering from a U.S.-accredited institution and a minimum of 5 years of continuous, professional electrical engineering experience in the U.S. Hands-on experience with industrial electrical systems, PLCs (Allen-Bradley, Siemens, or similar), AutoCAD Electrical, Medium Voltage (MV) systems, and Variable Speed Drives (VSD/VFD) is required. Candidates with primarily short-term contract work, limited U.S.-based experience, or a history of frequent job changes may not be considered. We are partnering with a well-established U.S.-based engineering organization to identify a Senior Electrical Engineer with deep technical expertise in industrial and power systems engineering. xevrcyc This is a long-term, direct-hire opportunity for an experienced engineer who thrives in a hands-on, design-focused environment.

Essex Industries is a multi-site aerospace and defense manufacturer serving military and commercial customers worldwide. The Manufacturing Engineer designs and improves manufacturing processes, tooling, and test equipment to support efficient production. This role optimizes layouts, workflows, and assembly methods while ensuring parts, tools, and processes meet product specifications and manufacturing goals. Essential Duties and Responsibilities: Using Solidworks, Designs and qualifies fixtures and tooling for assembly and manufacturing. Designs, specifies and qualifies test equipment. Analyzes and plans work force utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency. Confers with planning and design staff concerning product design to ensure efficient production methods. Project leader on NPD product integration in to the manufacturing facility, and represents operations at stage gate meetings on small to medium sized projects. Confers with vendors to determine product specifications and arrange for purchase of equipment, materials, or parts, and evaluates products according to specifications and quality standards. Estimates production times, staffing requirements, and related costs to provide information for management decisions. Applies statistical methods to estimate future manufacturing requirements and potential. Identifies, recommends and initiates continuous improvement projects in regards to processing, tooling and product flow. Prepare, review, and approve technical drawings and documents within a PDM environment. Required Education/Experience/Certifications: Knowledge equal to a Bachelor's degree in Mechanical, Manufacturing, or Industrial Engineering or related field and up to three years of experience; or equivalent combination of education and experience. Has knowledge of commonly-used concepts, practices, and procedures within manufacturing. Benefits Base Pay and Overtime Pay Eligible Bonus Opportunity Paid time off 10 company holidays Training & Development Retirement Benefits - 401k matching Tax-Advantaged Accounts Medical, dental, vision coverage Flexible Spending Account Life Insurance Parental Leave Pet Insurance Employee Assistance Program Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

We are seeking an experienced and motivated Schedule Engineer to join our team. The successful candidate will be responsible for providing technical support and project coordination for construction projects. As a key member of our project management team, the Project Engineer will be responsible for ensuring that projects are completed on time, within budget, and to the highest level of quality. Responsibilities Provide technical support for construction projects, including reviewing plans and specifications, preparing construction schedules, and coordinating with subcontractors Assist with project management activities, including developing project budgets, managing project resources, and monitoring project progress Ensure that all projects comply with relevant laws, regulations, and safety standards Manage project change requests, ensuring that changes are properly evaluated and approved Communicate with clients, stakeholders, and project team members to ensure that all parties are informed of project progress and any issues that arise Participate in project meetings and coordinate with project team members to ensure that all work is completed on schedule Assist in the development and implementation of project plans and schedules, ensuring that all work is completed on schedule and within budget Identify and manage project risks, ensuring that risks are mitigated and/or avoided Other duties as assigned Qualifications Bachelor's degree in civil engineering, construction management, or a related field 5+ years of experience in construction project engineering or related field Strong analytical skills, with the ability to analyze project data and identify trends and opportunities for improvement Excellent communication skills, with the ability to communicate effectively with a variety of audiences Experience with government contracts and compliance is a plus

Join the 125-year legacy of Potter Electric Signal Company! Potter has been a part of the St. Louis community since 1898 and we are very proud of our rich history in the fire and life safety industry. Potter's mission is to be the "Symbol of Protection" for fire and life safety solutions worldwide by combining the latest technology in fire protection with the dedicated manpower for which we have been known for over one hundred years. Our vision is to provide industry leading quality solutions, products and services for the protection of life, property and the environment. With unwavering dedication to our customers, Potter looks to continue as the industry standard in both product and service with increased focus on international expansion. Each employee at Potter takes great pride in knowing that every product we assemble, service, and sell is for the purpose of saving lives around the world. We strive to provide employment opportunities to those individuals who are performance driven, team players, take pride in their work, and are enthusiastic and passionate about their job. Potter Global Technologies and our private equity firm, KKR, value our employees and all that they do. KKR offers a unique benefit and opportunity for all employees to participate in an ownership program of Potter Global Technologies. Being a co-owner allows each employee to play a more direct role in the business itself and reap the financial benefits of the Company's success. The Manufacturing Engineer is responsible for designing, implementing, and improving manufacturing processes and systems to enhance efficiency, quality, and productivity. This position will play a crucial role in streamlining operations, reducing costs, and maintaining high product quality throughout the manufacturing process. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Provide technical support and problem-solving skills for the Manufacturing department to meet quality and quantity objectives. Review ECO's and implement new work instructions, tooling, and any training that might be needed for plant assembly. Investigate production problems to determine causes and to recommend corrective actions. Write work instructions for new manufacturing processes. Train supervisors and operators in accordance with work instructions. Initiate continuous improvement activities. Provide technical support for Maintenance personnel. Acting liaison between Manufacturing, Maintenance, QC, R&D, and Purchasing departments. Design Jigs and fixtures to aid in assembly processes. Perform other duties as assigned. Required Skills/Abilities Ability to act with integrity, professionalism, and confidentiality. Excellent verbal and written communication skills. Excellent time management skills with a proven ability to meet deadlines. Strong analytical and problem-solving skills. Ability to prioritize tasks and to delegate them when appropriate. Proficient with Microsoft Office products and Solid Works Required Qualifications Bachelor's Degree in Mechanical Engineering or similar. Minimum of 2 years of applicable experience. Willingness to be hands-on within the manufacturing floor. Preferred Qualifications Experience in a medium volume manufacturing environment. Machine and fixture design experience. PLC Software (GE Proficiency Machine Edition) experience. This is a full-time position, on-site at the manufacturing facility. The hours of work are Monday through Friday, 40 hours per week. An occasional shift in hours may be necessary to accommodate business needs. Work Environment/Physical Demands/Travel This job operates in a professional business office or home office where standard office equipment is routinely used, such as computers, photocopy machines, fax machines, telephones and filing cabinets. In addition, this job also operates in a warehouse/manufacturing setting where various tools and equipment are used. This role must be able to stand, bend, stoop, kneel and exhibit good visual acuity to perform daily tasks. This position must be able to lift 50 pounds at times. Must be able to access and navigate each department at the organization's facilities. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of an employee for this job. Activities, duties and responsibilities may change at any time with or without notice.

As a Manufacturing Engineer you'll be at the forefront of aerospace and additive manufacturing technologies. In this role you will be tasked with owning and improving the manufacturing processes and reporting for a growing advanced manufacturing site. As part of our ongoing commitment to excellence, you will be challenged to ensure our processes meet our AS9100 certification. This role will also be responsible for daily production scheduling assistance to meet our monthly goals. It's expected that you'll work with the engineering and sales teams to assess manufacturing requirements of incoming opportunities and provide timely feedback on cost and feasibility of inspection/inspection limits. At ADDMAN Engineering you'll be part of a rapidly growing world class engineering team, commonly interfacing internally with program managers, materials and process engineers, technicians, machinists, and company leadership. This role reports to the Engineering Manager. This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen or U.S. Permanent Resident. ESSENTIAL JOB FUNCTIONS: Maintain and improve the safe working environment on the shop floor and its surrounding areas. Assure the safe execution of all manufacturing and utility activities, demands that all Plant activities are conducted following all safety procedures, champions safety is the first consideration of all employees/contractors and promotes a safe work environment through own behaviors. Develop manufacturing reporting processes, lead integration of manufacturing processes into ERP and or MES systems Works with sales and engineer to assess incoming opportunities manufacturing requirements, support quoting of internal and external manufacturing costs while meeting qualification requirements Assess and audit existing or potential operator's abilities All quality requirements must be met daily by the manufacturing team. Review printed hardware for conformance to supplier or internal requirements at multiple stages in the manufacturing process i.e. post-print, post heat treat, and final inspection Actively participates in team problem solving, process improvement, and decisions Lead internal efforts to enhance our quoting, design, or manufacturing workflows Over time you may be expected to mentor, teach, and be an engineering technical resource for the organization Perform other duties as assigned Regular and punctual attendance Follow all Company policies and procedures ITAR REQUIREMENTS: To conform to U.S. export control regulations, applicant should be eligible for any required authorizations from the U.S. Government. Requirements SKILL REQUIREMENTS: Commitment to a safety culture where safety is the first consideration before starting any task Previous aerospace quality experience Mastercam experience up to and including 5-axis programming Experience with manufacturing /CNC machining processes QUALIFICATIONS: +10 years of working in a manufacturing environment in quality / technical role Able to work in a dynamic environment with changing priorities to exceed customer expectations Works independently, strong work ethic, is self-motivated and able to complete tasks with minimal supervision Ability to work on cross-functional teams to support the core business, ensuring quality products are delivered on time Computer aptitude (Outlook, PowerPoint, Word and Excel) Eligible to work in the United States without company sponsorship WORK ENVIRONMENT: This job operates in a professional additive manufacturing, traditional manufacturing and office environment. This role routinely uses standard office equipment such as printing equipment, computers, phones, photocopiers, filing cabinets, etc. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and listen. The employee frequently is required to stand; walk; use hands to handle or feel; and reach with hands and arms Ability to accomplish the physical requirements of the position with or without reasonable accommodation SAFETY AND POLICY PRACTICES: Each employee must be knowledgeable of standard safety policies and procedures and adhere to the same while supporting the goals and objectives of the organization and recognizing the Company's need to achieve its business objectives. Each employee is responsible for complying with company hazardous waste disposal procedures. ADDMAN Engineering is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities. All terms and conditions of employment will be administered without regard to an individual's sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable law. NOTE: This is intended to describe the general level of work being performed. This is not intended to be all-inclusive. The duties of this position may change from time to time, and the employee may perform other related duties to meet the ongoing needs of the organization. ADDMAN Engineering reserves the right to add, delete or modify these duties and responsibilities at its discretion. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this position. Employment is at-will, and nothing in this job description is intended to create or imply a contractual relationship or alter the at-will status of the employee.

Boyd Gaming Corporation has been successful in gaming jurisdiction in which we operate in the United States and is one of the premier casino entertainment companies in the United States. Never content to rest upon our successes, we will continue to evolve and retain a position of leadership in our industry. Our past success, our current business philosophies and our sound business planning, combine to position Boyd Gaming Corporation to maximize value for our shareholders, our team members and our communities. Job Description The Engineer II is responsible for providing superior service to both the internal and external customer. The position is also responsible for assisting in the performance of the following types of maintenance work: carpentry, plumbing, painting and mechanical. The Engineer II Provides superior customer service, positively effects interactions with customers and employees, and has the resiliency to deal with difficult customers in all types of business conditions and the ability to work harmoniously with coworkers. Fabricates, repairs, and maintains mechanical devices, motors and pumps. Keeps workshop orderly by cleaning tool boxes, putting away tools and parts, and straightening electrical storage area. Assists in building interface or accessory equipment as needed. Responds to customer requests for maintenance assistance in order to provide courteous, timely and expert service. Repairs and installs structural woodwork and equipment; assists in preparing wall surface for painting and wall covering, in order to ensure proper operation of all equipment according to established schedules and department standards. Performs upholstery work as required. Installs and maintains all tile, marble floor materials, carpet, and carpet tiles. Will run milling equipment, lathes and power tools; welds materials. Qualifications Knowledge of paint mixing techniques and airless spraying equipment Knowledge of upholstery techniques, tools, and equipment. Knowledge of materials and installation techniques related to carpet, carpet tiles, stone flooring materials, and hardwood floors. Knowledge of property layout, including sprinklers risers and emergency generator system. Must be able to obtain and maintain all appropriate licenses / certifications per Federal, State, and Gaming regulations. Must be at least 21 years of age. These skills and abilities necessary are typically acquired through the completion of a high school education and a minimum of two (2) years' related experience or through an A.A. degree in a related field or completion of a recognized apprenticeship program. Additional Information All your information will be kept confidential according to EEO guidelines. Boyd Gaming is proud to be an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class.

Description: The Gund Company has an immediate opening for a Product Applications Engineer to join our Business Development team! Annual Salary: $95,000+ (DOE) Plant/Work Location: 9333 Dielman Industrial Drive, St. Louis, MO 63132 Market/Value Stream: Electrical Transformers Training: 3-6 months The Gund Company, a leader in engineered material solutions, specializes in customized electrical insulation products. With 18 global facilities, we pride ourselves on delivering high-quality products and excellent customer service. We are currently seeking an Applications Engineer - Electrical Transformers to join our team at our Corporate Headquarters located in St. Louis, MO. Job Summary The Applications Engineer - Electrical Transformers is responsible for developing technical expertise within the Electrical Transformer Market and obtains an understanding of customer applications to assist customers with engineered solutions and to support the development of new products for the market. Job Duties Serve as the subject matter expert for customer applications with an ability to communicate to internal and external stakeholders in how our products and services can satisfy customer requirements. Support new product development projects from research, through planning and implementation. Develop marketing content (data sheets, white papers, technical bulletins, advertising materials, technical video, webinar, application engineering profile, etc.) to promote our technical expertise. Requirements: Bachelor of Science in Engineering required. 3-5+ years experience with Electrical Transformers or similar (Product Application Support or Design roles will be considered) Ability to understand customers application requirements and translate that into understanding internal capability development. Position is subject to meeting ITAR requirements. Preferred Electrical, plastics, composites, aramid, cellulose or elastomeric experience. Creating technical white papers and bulletins. Creating technical marketing materials. Bilingual in Spanish and/or French a plus. Travel: 25% Why Join Us? Safe, healthy, and inclusive work environment PTO and paid holidays Comprehensive, cost-effective benefits: Health, Dental, Vision, Life, Disability 401(k) with 50% employer match (up to 6% of contributions) Employee Stock Ownership Plan (ESOP) Tuition Reimbursement Ongoing training and development programs Ready to Make an Impact as an Applications Engineer specializing in Electrical Transformers? Apply today and bring your creative vision to The Gund Companywhere your ideas drive actual results and your career growth is our priority. The Gund Company is an Equal Opportunity Employer. Reasonable accommodations are available for individuals with disabilities for the role of Applications Engineer - Electrical Transformers. Created: 12222025 RJ FL MM Compensation details: 85000-112000 Yearly Salary PI17054ddaa1c2-31181-39311791

Summary: Responsible for safe, and effective operation of industry specific equipment with the primary purpose of performing engineering field inspections focused on testing construction materials for quality assurance. As a contracted employee of JARBO Employment Group, we expect you to have a positive attitude, to lead by example, demonstrate sound decision-making skills, encourage great teamwork, inspire those around you, and demonstrate good stress tolerance. We want to see you embrace and immerse yourself in the assigned company's culture. Primary Responsibilities: • Coordinate geotechnical drilling, mark field borings, log field activities and perform site reconnaissance. • Conduct lab activities as needed. • Prepare and/or distribute boring logs, boring plans and other critical reports under the supervision of a senior engineer. • Assist local CMT projects with special inspection services. • May assist with or conduct Construction Materials Testing services. • Assist in the preparation of proposals for geotechnical, CMT and environmental services. • Provide oversight and on-the-job training to additional CMT's and/or Inspectors. • Assist with construction documents and daily field report reviews as needed. • Represent the company at professional and/or client meetings. • Perform other special assignments and projects assigned by Branch or Senior Management.

SCI Engineering, Inc. is a professional consulting and engineering firm offering a variety of services from the design development stage through construction. We specialize in Geotechnical, Environmental, Natural Resources, Cultural Resources and Construction Testing services. We are currently seeking a highly-motivated, detail-oriented Geotechnical Engineer. The ideal candidate for this position has a passion for learning, and appreciation for excellent client service, desire to lead by example and the drive to come up with innovative solutions to geotechnical challenges. We want to hire someone with a commitment to technical excellence and the ability to develop and maintain relationships with our clients. Benefits (Full-time employees eligible) include: 401(k) (Matching Program) Health insurance (Including a HDHP option free for employees) Dental insurance (Free to Employees) Vision insurance (Free to Employees) Disability insurance (Free to Employees) Life insurance (Basic Term Life Free to Employees) Paid Time Off (PTO) Professional Development Assistance Employee Referral Bonus Tuition Reimbursement Why Join SCI? At SCI, your success is our success. We offer exciting opportunities for career advancement and professional development, encouraging continuous skill development and promoting from within based on performance and initiative. Collaboration and mentoring are key to our culture, and we welcome ideas for innovation and improvement. We also offer teambuilding opportunities through various clubs and committees. Don't take our word for it - an independent survey revealed that 91% of employees in our Geotechnical department think SCI Engineering, Inc.'s processes are efficient and 91% believe their managers support their professional growth and development. One Geotechnical employee described why they love their job: ‘I am continually learning new things that are applicable to my career goals. I am always being motivated to be better without feeling pressured or stressed.' We are proud to be recognized as a 2025 USA TODAY Top Workplace (topworkplaces.com/company/sci-engineering/). Our employees enjoy a casual dress code, including jeans every day, and benefit from a flexible work schedule that supports work-life balance. Our Good Cause Charity Program empowers employees to donate to the charity of the month, with SCI matching contributions. Join SCI and be part of a dynamic team that values your contributions and supports your growth. Apply today! Essential Functions, Duties, and Responsibilities General Characteristics Acquires limited knowledge and develops skills in a specific practice area. Applies standard techniques, procedures, and criteria to perform assigned tasks as part of a broader assignment. Exercises limited judgment on details of work and in application of standard methods for conventional work. Technical Responsibilities Performs basic design tasks. Assists on other basics such as: preparation of permit applications or reports, material testing, drawings. Performs research and investigations. Collects data and gathers information or documents. Performs standard computations or analysis. Prepares drawings and visual aids. Observes construction/field activities. Financial Responsibilities Meets direct hour goals. Meets profitability/chargeability goals. Manages project budgets. Communication Skills Possesses good oral and written communications skills. Interacts with other staff. Limited interaction with general public, officials and contractors. Qualifications BS degree, Geotechnical Engineering. MS degree, Geotechnical Engineering (preferred). Passed FE Exam. Excellent writing, organizational, and communications skills are essential. Must be personable and able to communicate with clients and staff at all levels. This position requires critical thinking and analysis; frequent sitting, standing, walking, and bending; working in all weather conditions; and driving to and from project sites. SCI is an Equal Opportunity Employer and does not discriminate against any applicant. All qualified applicants will receive equal consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice

About Watlow Watlow is a global technology and manufacturing leader who provides world class engineering expertise through innovative thermal products and systems, enabling our customers to thrive.Guided by our values: Do what is right, Always learning and improving, Respect everyone, and Lead with service and humility - we empower our people to turn ideas into real impact. Joining Watlow means becoming part of a team that embraces challenges, grows together, and shapes the future of technology, while making a real difference in the world. Description Watlow's St. Louis location serves as our global headquarters and a hub for innovation, engineering, and advanced manufacturing. Here, we design and develop cutting-edge thermal solutions that power critical applications across industries such as semiconductor, energy, and medical technology. We are hiring a: Product Development Co-op St. Louis, MO-Onsite About the role As a Product Development Co-op at Watlow, you will gain hands-on experience in designing and executing tests that shape the future of our products. Your work will directly impact innovation and quality, contributing to the success of our teams and customers worldwide.We are looking for a problem solver and continuous improver who thrives in a collaborative, fast-paced environment. You have a strong engineering mindset, a passion for quality, and the desire to make a tangible impact. If you're ready to take ownership and drive meaningful change, this role is for you. What You'll Do: Hands-on experience working in an electric heater test lab or machine shop alongside experienced engineers and technicians Assist in gathering test requirements and writing test procedures and plans Design and assemble test fixtures, wiring, and programming controllers Execute and monitor tests, perform failure and root cause analysis Write detailed test reports What you'll need to succeed? Pursuing an engineering bachelor's degree from an accredited university Preferred: Electrical or Mechanical Engineering Experience writing test plans and procedures Coursework in electrical circuits and heat transfer preferred Solid modeling experience (SolidWorks preferred) Aptitude for using tools; LabVIEW experience is a plus Why Join Watlow's team: The health, well-being and financial stability of you and your family is a high priority to us. The Watlow Total Rewards Plan includes competitive compensation and a full range of life and career enhancing benefits.Work model: OnsiteLearning and growth opportunities: Work with cross-functional teams and gain hands-on experience in a state-of-the-art testing facility. Diversity & Inclusion We proactively embrace diversity in all its dimensions across our company and cultivate a culture of inclusion and forward thinking that respects and reflects each team member's individual strengths, views, and experiences. Watlow takes pride in being an inclusive equal opportunity employer and considers for employment qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Chicago, IL, USSt. Louis, MO, USKansas City, MO, USPhoenix, AZ, USWashington DC, DC, USDallas, TX, USAtlanta, GA, US Jan 12, 2026 Dentons US LLP is currently recruiting for a skilled and experienced Integration Engineer to design, implement, and maintain seamless data integration solutions across our legal technology ecosystem. This role focuses on connecting disparate legal systems, ensuring reliable data flow between applications, and maintaining the technical infrastructure that enables our legal operations. The successful candidate will possess deep expertise in legal industry systems integration, database connectivity, and enterprise integration platforms, with the ability to translate business requirements into robust technical solutions. **Responsibilities** + Design and implement comprehensive integration solutions connecting Elite 3E, iManage, SharePoint, and other legal systems to ensure seamless data exchange and system interoperability. + Develop and maintain ETL/ELT pipelines and real-time data synchronization processes between Microsoft SQL Server databases and legal applications. + Configure and manage API-based integrations, webhooks, and middleware solutions to enable secure data flow between SaaS services and on-premise legal systems. + Implement database integration solutions using Microsoft SQL Server, including stored procedures, triggers, and linked servers to support cross-system data operations. + Build and maintain PowerBI data connections and refresh processes, ensuring legal dashboards have access to real-time integrated data from multiple sources. + Configure and optimize Microsoft Fabric integration services, including Data Factory pipelines and Synapse connectivity for legal system data flows. + Implement Databricks integration workflows for complex data transformation requirements between legal systems and data platforms. + Monitor integration performance, troubleshoot connectivity issues, and implement optimization strategies to maintain high availability of integrated legal systems. + Develop and maintain comprehensive technical documentation of integration architectures, data mappings, and system connectivity specifications. + Collaborate with legal IT teams, vendors, and stakeholders to gather integration requirements and deliver solutions that meet operational needs. + Implement and manage Change Data Capture (CDC) mechanisms to track and propagate real-time changes across integrated legal systems. + Ensure integration security measures and compliance standards are met across all system connections, particularly for sensitive legal data. + Other duties as needed to fully meet the requirements of the role. **Experience & Qualifications** + Minimum 5 years of experience in systems integration, with at least 3 years specifically working with legal industry applications and databases. + Hands-on experience integrating Elite 3E with external systems, including API connectivity, database integration, and custom interface development. + Proficient in iManage system integration, including document metadata synchronization, workflow automation, and third-party application connectivity. + Advanced experience with Microsoft SQL Server integration, including SSIS packages, stored procedures, linked servers, and cross-database connectivity solutions. + Strong knowledge of SharePoint integration patterns, including REST APIs, PowerShell automation, and document library synchronization with legal systems. + Experience with PowerBI integration architecture, including gateway configuration, data source management, and automated refresh scheduling. + Hands-on experience with Microsoft Fabric integration services, Data Factory pipelines, and enterprise data connectivity solutions. + Proficiency with Databricks integration workflows, including cluster connectivity, job scheduling, and data pipeline orchestration. + Expertise in SaaS integration platforms such as Boomi, MuleSoft, or similar enterprise integration tools for connecting legal applications. + Strong experience with REST APIs, SOAP services, webhooks, and enterprise service bus architectures for legal system connectivity. + Proficiency in SQL, PowerShell, and scripting languages for automation and integration development tasks. + Experience with enterprise integration patterns including batch processing, real-time synchronization, and event-driven architecture. + Knowledge of legal industry data structures, compliance requirements, and security standards for system integration. + Strong analytical and troubleshooting skills with ability to diagnose complex integration issues and implement effective solutions. + Excellent communication skills with ability to work effectively with technical teams, legal professionals, and vendor support organizations. + Experience with cloud integration platforms, particularly Microsoft Azure Logic Apps, Service Bus, and API Management services. + Familiarity with version control systems, deployment pipelines, and change management processes for integration solutions. **Salary** Chicago Only DOE: $110,000 - $140,000 Washington DC DOE: $115,000 - $145,000 Dentons US LLP offers a competitive salary and benefits package including medical, dental, vision, 401k, profit sharing, short-term/long-term disability, life insurance, tuition reimbursement, paid time off, paid holidays and discretionary bonuses. _Dentons US LLP is an Equal Opportunity Employer - Disability/Vet. Pursuant to local ordinances, we will consider for employment qualified applicants with arrest and conviction records._ _If you need any assistance seeking a job opportunity at Dentons US, LLP, or if you need reasonable accommodation with the application process, please call our Talent Acquisition Specialist at *************** or contact us at *************************************._ **About Dentons** Redefining possibilities. Together, everywhere. For more information visit *************** **Nearest Major Market:** Chicago

Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Overview Help Accepting applications Open & closing dates 12/22/2025 to 12/21/2026 Salary $63,795 to - $164,301 per year Pay scale & grade GS 11 - 15 Locations Few vacancies in the following locations: Eielson AFB, AK Elmendorf AFB, AK Fort Richardson, AK Maxwell AFB, AL Show morefewer locations (79) Little Rock AFB, AR Davis Monthan AFB, AZ Luke AFB, AZ Beale AFB, CA Edwards AFB, CA El Segundo, CA Los Angeles, CA March AFB, CA Travis AFB, CA Vandenberg AFB, CA Air Force Academy, CO Buckley AFB, CO Cheyenne Mountain AFB, CO Colorado Springs, CO Peterson AFB, CO Schriever AFB, CO Joint Base Anacostia-Bolling, DC Dover AFB, DE Cape Canaveral, FL Cape Canaveral AFS, FL Eglin AFB, FL Homestead AFB, FL Hurlburt Field, FL MacDill AFB, FL Patrick AFB, FL Tyndall AFB, FL Dobbins AFB, GA Moody AFB, GA Robins AFB, GA Hickam AFB, HI Mountain Home AFB, ID Scott AFB, IL Grissom AFB, IN Barksdale AFB, LA Hanscom AFB, MA Westover Air Reserve Base, MA Andrews AFB, MD Linthicum Heights, MD Selfridge ANG Base, MI Whiteman AFB, MO Columbus AFB, MS Keesler AFB, MS Malmstrom AFB, MT Grand Forks, ND Minot AFB, ND Offutt AFB, NE New Boston, NH McGuire AFB, NJ Cannon AFB, NM Holloman AFB, NM Kirtland AFB, NM Nellis AFB, NV Niagara Falls, NY Wright-Patterson AFB, OH Youngstown, OH Youngstown, OH Altus AFB, OK Tinker AFB, OK Vance AFB, OK Charleston, SC Shaw AFB, SC Arnold AFB, TN Dyess AFB, TX Fort Sam Houston, TX Goodfellow AFB, TX Kelly AFB, TX Lackland AFB, TX Laughlin AFB, TX Randolph AFB, TX Hill AFB, UT Alexandria, VA Arlington, VA Dahlgren, VA Fort Eustis, VA Langley AFB, VA Pentagon, Arlington, VA Fairchild AFB, WA McChord AFB, WA Warren AFB, WY Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Multiple Work schedule Full-time Service Competitive Promotion potential 15 Job family (Series) * 0855 Electronics Engineering Supervisory status No Security clearance Secret Drug test No Position sensitivity and risk Noncritical-Sensitive (NCS)/Moderate Risk Trust determination process * Suitability/Fitness Financial disclosure No Bargaining unit status No Announcement number AFPCDHA-12857056-0855-CYBER Control number 852987000 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Clarification from the agency This public notice is to gather applications that may or may not result in a referral or selection. Duties Help * Duties and responsibilities vary and may increase according to grade level * Use engineering manuals, standard publications, and technical material to obtain information and pertinent data for use by higher level engineers, contractors and/or customers. * Keep abreast of emerging technologies and professional developments to maintain currency in the field and for application to work assignments. * Perform duties in support of the installation, operations, and maintenance of weapon systems, subsystems, facilities, machinery, and/or support equipment. * Perform developmental assignments in the application of established principles, techniques, methods, and procedures of professional electronics engineering in the area of installation, operations, and maintenance. Requirements Help Conditions of employment * Please read this Public Notice in its entirety prior to submitting your application for consideration. * U.S. Citizenship is required * Males must be registered for Selective Service, see *********** * Total salary varies depending on location of position * If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: ***************************************** * Recruitment incentives may be authorized * Position may be subject to random drug testing * Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays * Shift work and emergency overtime may be required * Employee must maintain current certifications * A security clearance may be required * Disclosure of Political Appointments * Full/part-time employees occupying direct childcare positions are eligible for discounts IAW DAF AFSVC/CC Memo, 30 Sep 22; first child 100% / each additional child 25%. Other assigned CYP and FCC personnel are eligible for 25% discount. Qualifications BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: GS-11: At least one year of specialized experience equivalent to at least the GS-09 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Modeling and simulation professional theories, concepts, principles, techniques, and practices of computer engineering, electronics engineering and/or computer science. GS-12: At least one year of specialized experience equivalent to at least the GS-11 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Leading and/or performing engineering work involving electronic circuits, circuit elements and equipment systems; applying a number of diverse electronics engineering practices, techniques and processes to identify and resolve complex engineering issues; supporting the planning, testing and troubleshooting of electronics engineering systems or devices; and, developing computer aided engineering analysis and tools in support of planning and designing applications. GS-13: At least one year of specialized experience equivalent to at least the GS-12 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-14: At least one year of specialized experience equivalent to at least the GS-13 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-15: At least one year of specialized experience equivalent to at least the GS-14 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): * Knowledge of electronics engineering concepts, principles, methods, techniques, and standard engineering practices to perform moderately difficult or relatively limited phases of a larger and more complex installation, operations, and maintenance engineering project. * Knowledge of computer aided design and drafting (CADD) programs to perform design and drafting assignments, as well as other computer applications used in support of plans, analysis, and project reports. * Skill in applying the principles, concepts, and practices of the occupation sufficient to perform limited assignments in the field of electronics engineering. * Ability to communicate factual and procedural information clearly, orally and in writing. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience; transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation. FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying. Additional information For Direct Hire (DHA) Positions: This is a Direct Hire Public Notice, under this recruitment procedure applications will be accepted for each location/ installation identified in this Public Notice and selections are made for vacancies as they occur. There may or may not be actual/projected vacancies at the time you submit your application. Interagency Career Transition Assistance Program (ICTAP): For information on

Candidates can live within commutable distance to any Slalom office in the US. We have a hybrid and flexible environment. Who You'll Work With As a modern technology company, our Slalom Technologists are disrupting the market and bringing to life the art of the possible for our clients. We have a passion for building strategies, solutions, and creative products to help our clients solve their most complex and interesting business problems. We surround our technologists with interesting challenges, innovative minds, and emerging technologies. We are seeking an experienced AWS Application Modernization Engineer with hands-on expertise in transforming legacy applications into cloud-native, modern architectures. This role will focus on designing, modernizing, and optimizing applications on AWS, leveraging containers, serverless, microservices, and DevOps best practices. As a key technical contributor, you will work closely with cloud architects, data scientists, and business stakeholders to modernize applications using cloud-native services and tools. This role is delivery-focused and requires strong engineering skills in building, migrating, and integrating applications on AWS. This is an excellent opportunity for an innovative cloud professional with strong AWS and AI expertise, combined with consulting and solutioning skills, to shape the future of cloud-native applications. What You'll Do * Implement application modernization projects, including re-platforming, re-architecting, and refactoring of enterprise applications for AWS. * Build applications using microservices, event-driven architectures, and serverless-first designs leveraging AWS services such as EKS, ECS, Lambda, API Gateway, Step Functions, DynamoDB, Aurora, and App Runner. * Develop and maintain DevOps pipelines and cloud-native CI/CD workflows to accelerate application delivery. * Implement containerization strategies using Kubernetes (EKS), Docker, and ECS with best practices for scaling and resilience. * Modernize data layers using Aurora, DynamoDB, RDS migrations, ElastiCache, and API-driven integration patterns. * Ensure application designs meet enterprise-grade requirements for security, compliance, observability, and disaster recovery. * Work with security and governance teams to embed cloud-native security controls, identity, and compliance frameworks. * Stay current with AI trends in cloud-native development and contribute to proofs-of-concept that demonstrate business value from AI-enhanced applications. * Design and implement Generative AI and Agentic AI solutions on AWS using services such as Amazon Bedrock, SageMaker, Lambda, and API Gateway. * Build and optimize LLM-powered applications for use cases including knowledge assistants, code generation, customer service automation, and enterprise search. * Integrate AI-powered services into modernized applications where appropriate, such as intelligent search, content generation, or predictive analytics. * Architect autonomous agent workflows capable of orchestrating multi-step reasoning, tool usage, and integrations with enterprise systems. * Partner with DevOps and MLOps teams to integrate model training, fine-tuning, and deployment pipelines using Terraform, CloudFormation, or AWS CDK. * Monitor and optimize AI model performance using tools such as SageMaker Model Monitor, CloudWatch, and custom observability frameworks. * Provide strategic guidance on AWS AI adoption, including cost optimization, scaling strategies, and roadmap development for AI-enabled enterprises. What You'll Bring * 4+ years of experience in application architecture, development, or modernization. * 3+ years in AWS cloud modernization projects. * Hands-on expertise in modernizing applications using microservices, containers, and serverless architectures. * Experience with legacy-to-modern transformations (Java/.NET to containerized or serverless architectures). * Strong knowledge of AWS services supporting modernization, including EKS, ECS, Lambda, API Gateway, App Runner, Aurora, DynamoDB, CloudFront, and Step Functions. * Knowledge of application integration patterns, APIs, and event-driven systems (SNS, SQS, Kafka, Kinesis). * Proficiency with DevOps and Infrastructure-as-Code (Terraform, CloudFormation, AWS CDK). * Experience building and maintaining CI/CD pipelines for application delivery. * Familiarity with modern software delivery practices (Agile, DevOps, GitOps). * Proficiency in automation and scripting (Python, Bash, PowerShell) for AI workflows and integrations. * Experience with AWS AI/ML services such as Amazon Bedrock, SageMaker, Comprehend, Transcribe, Translate, Rekognition, and related integrations. * Familiarity with MLOps practices for training, deployment, and lifecycle management of AI/ML models. * Strong knowledge of cloud security and compliance in AI deployments (IAM, encryption, responsible AI, data privacy). * Excellent communication skills with the ability to bridge technical and business conversations. Nice to Have: * AWS certifications such as: * AWS Certified Solutions Architect - Associate/Professional * AWS Certified DevOps Engineer - Professional, or AWS Certified Developer - Associate. * AWS Certified Machine Learning Specialty * Experience with cloud-native development frameworks (Spring Boot, Node.js, .NET Core, Python for Lambda). * Familiarity with modernization accelerators such as AWS Migration Hub Refactor Spaces, App2Container, and Microservice Extractor. * Hands-on expertise with Generative AI and Agentic AI technologies, including large language models (LLMs), fine-tuning, prompt engineering, and agent orchestration. * Familiarity with Zero Trust AI security models and ethical AI frameworks. About Us Slalom is a fiercely human business and technology consulting company that leads with outcomes to bring more value, in all ways, always. From strategy through delivery, our agile teams across 52 offices in 12 countries collaborate with clients to bring powerful customer experiences, innovative ways of working, and new products and services to life. We are trusted by leaders across the Global 1000, many successful enterprise and mid-market companies, and 500+ public sector organizations to improve operations, drive growth, and create value. At Slalom, we believe that together, we can move faster, dream bigger, and build better tomorrows for all. Compensation and Benefits Slalom prides itself on helping team members thrive in their work and life. As a result, Slalom is proud to invest in benefits that include meaningful time off and paid holidays, parental leave, 401(k) with a match, a range of choices for highly subsidized health, dental, & vision coverage, adoption and fertility assistance, and short/long-term disability. We also offer yearly $350 reimbursement account for any well-being-related expenses, as well as discounted home, auto, and pet insurance. Slalom is committed to fair and equitable compensation practices. For this position, the target base salary pay range in the following locations: Boston, Houston, Los Angeles, Orange County, Seattle, San Diego, Washington DC, New York, New Jersey, for Consultant level is $105,000-147,000 and for Senior Consultant level it is $120,000-$169,000. In all other markets, the target base salary pay range for Consultant level is $96,000-$135,000 and for Senior Consultant level it is $110,000-$155,000. In addition, individuals may be eligible for an annual discretionary bonus. Actual compensation will depend upon an individual's skills, experience, qualifications, location, and other relevant factors. The salary pay range is subject to change and may be modified at any time. EEO and Accommodations Slalom is an equal opportunity employer and is committed to attracting, developing and retaining highly qualified talent who empower our innovative teams through unique perspectives and experiences. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veterans' status, or any other characteristic protected by federal, state, or local laws. Slalom will also consider qualified applications with criminal histories, consistent with legal requirements. Slalom welcomes and encourages applications from individuals with disabilities. Reasonable accommodations are available for candidates during all aspects of the selection process. Please advise the talent acquisition team if you require accommodations during the interview process. We will accept applications until 1/31/2026 or until the positions are filled.

Would you like to be a part of a company that is employee owned? Consider joining a talented team of engineering professionals at Nooter/Eriksen Inc., based in Fenton, MO. We specialize in HRSG (Heat Recovery Steam Generator) design, construction and supply of equipment and solutions in the power industry worldwide. Nooter/Eriksen is seeking a full-time Instrument & Mechanical Project Engineer to join our Engineering Team. This role is part of a team that is responsible for applying technical expertise in the development of Instrumentation & Controls (I&C) equipment design specifications and document deliverables to satisfy Customer requirements, minimize risk, and ensure product integrity for Heat Recovery Steam Generators (HRSGs). This position is located in Fenton, MO. The expectation is that this will be a hybrid position depending on business needs. Make an Impact! There's never been a more exciting time to join the energy infrastructure industry, especially an employee-owned OEM with profit-based incentive opportunities! This role offers the opportunity to directly impact the efficiency and reliability of modern power generation systems. As an HRSG Process Specialist, you will be at the forefront of optimizing combined cycle plant performance and shaping the future of energy technology. About Nooter/Eriksen: Nooter/Eriksen is an employee-owned company with headquarters in Fenton, MO and Milan, Italy. We specialize in HRSG (Heat Recovery Steam Generator) design, fabrication, equipment, and solutions for clients in the power industry, worldwide. We offer a flexible work schedule with the option of working half-days on Fridays, year round! We provide a full benefits package. Our 401(K) provides an employer match and an annual non-elective contribution. We provide medical with an employer contribution toward the HSA. Dental and Short-Term disability is 100% covered by the company. We also offer vision and fitness reimbursement. We pride ourselves on our collaborative environment where employees are empowered to advance their career, explore career paths, and grow personally and professionally. DAY IN THE LIFE: The Instrument & Mechanical Project Engineer reports directly to the I&C Engineering Manager and will be responsible for determining required supply and design requirements of valves, instrumentation and specialty equipment based on thermal process data, applicable codes, technical standards and Customer requirements, reviewing Supplier data to evaluate technical validity and conformance to specifications and to identify associated risks, collaborating with cross-functional project team in Supplier selection process for valve, instrumentation and equipment orders and providing design solutions that are feasible and cost-effective. As an Instrument & Mechanical Project Engineer you will oversee the development and maintenance of project specific Process and Instrumentation Diagrams (P&IDs), develop and maintain critical project documents including Valve, Instrument and Equipment Lists, control system Input/Output (I/O) Lists, data sheets, and other Customer required documentation, assist in the development and management of Control Logic Diagrams and Control Logic Narratives, analyze thermal process data and perform the required engineering calculations to establish the appropriate technical requirements for equipment design Communicate and coordinate with Suppliers, evaluate bids, identify risks, and make recommendations for procurement of valves and instrumentation, develop and manage purchase order packages for valves, instrumentation and specialty equipment, review Customer technical specifications, critical project documentation and Supplier equipment data, and communicate and collaborate with intradepartmental team members to address questions and comments and resolve technical issues. QUALIFICATIONS. We want the person selected for this role to be successful! The following qualifications are essential to be effective in this role: Four-year degree; BSME preferred, BSChE or BSEE accepted. Excellent time management and written and spoken communication skills, highly professional, organized, and trustworthy team player; proficiency in English. Ability to read, write, problem solve, make quick decisions, interpret data and analyze results; effective written and verbal communication is essential. If you are interested in this position, please simply click the Apply button or visit our careers page at ********** to get started! Our application is quick and should take you less than 5 minutes to fill out. Your information will be then sent directly to the Recruiter. Nooter/Eriksen is committed to creating and maintaining an environment in which all employees feel valued, included, safe, and empowered to do their best work. We are proud to be an equal opportunity workplace and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics. Pre-employment drug screen and background check required.

We are seeking a Associate Firmware Engineer to support our gateway and embedded application platforms. This person will assist in the development and support of multiple Linux-based and real-time platforms. The candidate should possess experience with various technologies such as networking, communications, kernel drivers, and security. Responsibilities: * Requirements analysis: Requirements gathering, use case analysis, device and application prototyping, customer/customer-liaison engagement. * Project management: Project planning, task estimation, software metrics collection, version control * Full lifecycle software application development: Design, programming, debugging, peer review, unit testing, performance tuning, integration * Documentation: Program commentary, user guides for service and troubleshooting * Product testing: Unit testing, bench testing, system integration testing, and field test support * Teamwork: Effective team member with a consistent positive attitude, creativity * Hardware development support: Software support for hardware development and testing * Other tasks and activities as required by management. Requirements: * Bachelor's Degree or foreign equivalent with strong emphasis on software: Computer Science, Software Engineering, Electrical Engineering, Computer Engineering * 0-2 years of experience in a firmware development role * 0-2 years of experience in software development for Linux-based platforms * 0-2 years of experience using the C/C++ programming language. * Experience with software programming languages, frameworks, and subsystems including but not limited to: * C/C++, JavaScript, Python, Go, Perl, Shell * Linux kernel, device drivers, filesystems, networking, serial communications, real-time operating systems (RTOS), bare metal * Build systems * Unit Testing Frameworks * IP networking: TCP, UDP, TLS, DNS * Familiarity with software development environments and tools: * Integrated platforms like Eclipse, CodeWarrior, Visual Studio * Source code version control: Git * GNU Compiler and GDB * Additional, highly sought but not required. * Debugging with ARM JTAG/SWD * Embedded systems experience with control applications. * HVAC experience * Qt experience * Experience integrating unit testing w/ CI/CD pipelines. * Serial communications: RS232/485, CAN, USB * Protocols: ModBus, BACnet, SNMP, CANOpen * Platforms: ARM, x86, SoC The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES * Customer Focus * Operational Excellence * High-Performance Culture * Innovation * Financial Strength OUR BEHAVIORS * Own It * Act With Urgency * Foster a Customer-First Mindset * Think Big and Execute * Lead by Example * Drive Continuous Improvement * Learn and Seek Out Development About Vertiv Vertiv is a $8.0 billion global critical infrastructure and data center technology company. We ensure customers' vital applications run continuously by bringing together hardware, software, analytics and ongoing services. Our portfolio includes power, cooling and IT infrastructure solutions and services that extends from the cloud to the edge of the network. Headquartered in Columbus, Ohio, USA, Vertiv employs around 20,000 people and does business in more than 130 countries. Visit Vertiv.com to learn more. Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. Equal Opportunity Employer Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************. #LI-AC2