Staff engineer jobs in Winston-Salem, NC - 293 jobs

The ideal candidate will be responsible for assisting the Project Manager, Superintendent, and Project Team with project documentation and control, job cost accounting, scheduling, and construction supervision efforts. In order to be successful, this candidate should feel comfortable taking on many tasks that require various skills, and appropriately prioritizing those tasks' completion. Responsibilities Assist office and on-site management to ensure project success Ensure project plan is moving forward to meet anticipated deadlines Prepare RFI's & Submittal's and material takeoffs Processes material receiving documentation and assist cost coding Maintain accurate and updated logs for weekly progress tracking Qualifications Bachelor's degree in Mech/Civil Engineering, Construction Management, or equivalent experience 1 - 3 years' of experience as a Project Engineer Intern or other construction related fields Ability to learn construction technology software i.e. Bluebeam, Procore, P6, and Microsoft Office Familiarity with safety rules, regulations, best practices and QA/QC performance standards Prior Water & Wastewater knowledge or work experience preferred

Job Role: Imaging Service Engineer Experience required: 3 Years Work Authorization: US Citizen and Green Card What You'll Do: Install, maintain, calibrate, and repair complex diagnostic imaging equipment including but not limited to CT, C-arm, portable X-ray, and ultrasound systems. Utilize technical and customer service skills to assess and resolve imaging equipment issues efficiently. Collaborate with clinical staff and other healthcare professionals to identify and resolve equipment-related issues. Document service activities and maintain accurate records within the department's tracking systems. Participate in on-call rotation schedule and provide emergency support as needed. Position Summary: Inspect, repair, maintain, and calibrate basic diagnostic imaging equipment, devices, system, and instruments. Interact on a routine basis with other clinical health providers in the identification of technology-based problems. MUST HAVE: Associates Degree (or equivalent experience) in electronics, biomedical engineering, or other technical discipline contributing to proficiency of maintenance and repair of imaging equipment within a healthcare environment 3 years of experience within a healthcare setting with direct responsibility for the maintenance and repair of clinical devices and/or 1 year of imaging equipment repair and maintenance within a healthcare environment and/or entry level of formalized training and/or equivalent military training. Demonstrated expertise in troubleshooting and resolving technical issues with imaging equipment. Proficiency with common test equipment, tools, and diagnostic software. Experience working in a hospital or healthcare environment. Please share your resume ASAP

Role: AutoCAD System Engineer Duration: 1 Year Contract What you'll be doing Participate in daily written and verbal reports up to Senior Manager level. Developing process plans for battery production lines within the Battery PE department with direct support from the Manager. Working in a collaborative team environment (supporting other Engineers, Construction Management Group, Technicians, Vendors, General Contractors, etc.) to achieve project milestones. Equipment procurement, installation planning to execution, commissioning, pre-production trials, and launch of battery production lines. Participate in advanced cleanliness protocols (clean room) necessary for assigned area of battery manufacturing. Lead and/or support equipment trials at vendors prior to shipping and on the manufacturing floor after installation ensuring all targets are met for safety, quality and productivity. Support shop floor-level implementation of network systems, which includes andon and Manufacturing Execution System (MES), as well as connectivity to higher level IT-managed systems, i.e. Manufacturing Operations Management (MOM). Support battery network system plans and specifications, applying knowledge of OPC-UA, CC-Link, SQL, and SCADA system implementation. Configuring manufacturing equipment PLCs (primarily Mitsubishi) for network systems connectivity using SLMP, Ethernet TCP, and Ethernet IP protocols. Punchlist item identification, root cause analysis, and countermeasure management KPI summarization, mass-production handover, and production issues support Cross-functional team engagement (domestic and international) to discuss open items and key project schedules/milestones. Creating and maintaining detailed schedules for assigned areas. Maintain budgets for assigned areas. Completing internal and external training Requirements: Bachelor's degree or higher in Engineering or similar technical field. 3+ years of equivalent professional experience in a manufacturing environment. Experience in production preparation and execution of capital projects, preferably from initial strategy planning to the start of mass production. Project management experience dealing with capital investments greater than $0.5M. Experience in creating and maintaining detailed schedules including milestone achievement for manufacturing equipment installation. Ability to read and interpret 2D drawings including building facilities and process equipment drawings. Proficiency with Microsoft Office products (Word, Excel, PowerPoint, etc.). Proficiency with 2D and 3D drafting software such as AutoCAD. PLC experience including the ability to Read, interpret and modify. Ability for business travel, both domestic and international up to 10%. Ability to work weekends, holidays, and shutdown periods (such as July and December shutdown) as needed, based on project condition and schedule. SQL / Oracle or other database experience. Experience with Cisco networks and maintain a machine network. Experience using Ignition for programming Andon visualization and other tools. Added bonus if you have Mitsubishi PLC Programming experience SCADA Systems experience MES experience Experience with Kepware software or similar SCADA Data systems

Legal Entity: American Honda Motor Co., Inc. Business Unit: Law & Intellectual Property Department: Contracts Division: Corporate Operations Support Shift: 1st Workstyle: 100% Onsite Career Level: 6 Job Grade: Exempt-IC2 Job Purpose This role provides high quality, proactive legal services, negotiating, drafting, and advising on Honda contracts that have a substantial impact on Honda's manufacturing operations and potential liabilities. This includes advising on contracts for direct parts, raw materials, & dealer service parts contracts, capital production equipment and other facility and production related contracts, supply chain contracts, service agreements, and logistics contracts. The role will provide timely and cost-effective basis for moderate to highly complex matters. The role will primarily focus on support related to Honda Aircraft Company, LLC in Greensboro, NC, but may also include support for a variety of Honda companies throughout the North American Region. This role will research and draft agreements, policies, and procedures, perform legal research on state and federal laws, retain and supervise outside counsel where applicable, provide legal education/training to various Honda entities, manage risks by identifying countermeasures, and undertake projects to proactively identify issues and take steps to implement countermeasures. Key Accountabilities Direct and Indirect Commercial Support: Provide high quality advice and negotiation, in a timely and cost-effective manner, to enable Honda Companies and/or divisions to meet legal obligations and reduce risk for moderate to complex commercial transactions. This includes negotiating and managing high value/critical contracts for direct automotive parts, raw materials, & dealer service parts contracts, capital production equipment & other facility and production related contracts, as well as supply chain contracts, service agreements, and logistics contracts. Support and lead special projects and other commercial and law initiatives. Advise business teams on commercial disputes involving suppliers and work with team to resolve disputes for applicable Honda entities. Manage applicable outside counsel and fees, to reach the best long-term solution for Honda in moderate to complex matters. Knowledge management: Follow changes in all relevant international, federal and state laws and regulations, and exchange and share legal knowledge within the applicable Honda entity/division/department, as well as train Honda business and law associates in legal best practices, to improve the awareness, quality and effectiveness of the legal function. Projects: Participate in the planning, execution, and leadership of assigned projects with a regional focus. Qualifications, Experience, and Skills Juris Doctorate Degree from an Accredited Law School Admittance to state bar in a state in the U.S., and will be either admitted to the North Carolina bar or eligible to qualify for in-house practice in North Carolina At least 10 years of in-house, law firm, or other equivalent legal experience, good knowledge of the areas of Contracts and Commercial legal practice areas. Aviation experience is preferred but not required Excellent skills in communication, problem solving, client satisfaction, building relationships, coaching, decision-making, risk analysis, flexibility/adaptability, patience, listening, good writing, risk taking, focusing on achieving results and supporting others to achieve results, and legal technical knowledge Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Are you looking for a new challenge within engineering? Maybe this job as a R&D Engineer in Winston Salem, NC is for you! Amarr, part of global opening solutions leader ASSA ABLOY, is searching for an experienced R&D Engineer to design and develop various systems and components related to residential garage doors. Assignments will be broad in nature, usually requiring initiative, originality, ingenuity and excellent problem-solving skills. Essential Functions: Product designer for major Pre Product Innovation (PPI), New Product Innovation (NPI), and Continuous Product Innovation (CPI) development projects. Work closely with internal and external company design, application and manufacturing engineering resources, designing with system-wide perspective. Lead, participate in or support the following product development activities: Concept, planning, design and execution stages of major new products or product enhancements Risk assessment Prototyping and testing concept designs and initial engineering builds Pilot Production Design reviews Design verification testing Product validation and usability testing Pre-production Create and release Product Requirements, Design Specifications and Design Descriptions for assigned projects. Regular review of the competitive market and products, including interfacing with customers, as well as current and future market needs. Interact with global and internal design and manufacturing resources to design for manufacturability, reliability and cost-effectiveness. Qualifications and Requirements: Bachelor's degree in Mechanical Engineering or related. 5-7 years minimum experience in the design and development of manufactured products Experience working in cross-disciplinary teams. Experience with roll formed and stamped thin gauge steel and molded/extruded plastic and rubber component design AutoCAD Inventor, Solid Works experience Experience with rapid prototype design and build for proof of concept and usability testing a plus. Knowledge in the selection of various materials and adhesives along with experience designing roll formed, extruded, and molded components and product assemblies are key areas that will set apart potential candidates. Benefits include Medical/Dental/Vision, Paid Time Off, Paid Holidays from day one, tuition reimbursement, and a 401k plan (with an automatic 3% company contribution, regardless of your contribution) among others. Our goal is to be a world-leading company that attracts diverse talent, where all team members feel safe being their true selves and are able to thrive in a work environment that promotes change, innovation, and provides equal access and opportunity. As one of North America's leading garage door manufacturers, Amarr Company takes pride in fostering a culture where employees enjoy many opportunities for career growth, rapid advancement, and relocation to some of America's most desired cities. Although Amarr Company is an international business, employees enjoy a family-oriented, caring culture and rewarding work environment. Amarr Company offers competitive wages, generous benefits, and a bonus program for every employee. At Amarr Company, the door is always open and there is no ceiling to your career growth. #amarrcareers All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Amarr is an E-Verify participant.

Stefanini Group is hiring! Do you want to be a part of a highly innovative, digitally transformative team and work on cutting edge, state of the art technologies in the Automotive Industry? If yes, then this is for you! Please read the description below and reach out to us! We are looking for an Assembly Tooling & Equipment Engineer who is responsible for coordinating T&E development and connecting T&E engineers (& WPs) with LTSs, Plant PMs, and TPEs, to secure project timelines, budgets, and other plant deliverables. Responsibilities: Coordinating T&E development including concept selections Will coordinate TERs (Tooling & Equipment Request) process - timing Ensure that Work Packages (from various contractor houses) are delivered with good quality - zero defect mindset Along with Plant PMs, define and secure T&E deployment for P6700 C-builds - deliver the tools and equipment Support TPEs & LTSs on the TER's inputs towards the P6700 C-releases - secure product & process final solution B.S. Engineering degree T&E (Tools & Equipment) designing experience CAD experience (CATIA / CREO preferably) Project Management Experience Additional information: This job is for roughly 1 year, with possibility for extension. The first 6 months will require some travel to NRV, and the next 6 months will require often trips to NRV. Interested applicants may click the apply button or you may call us at ************** for faster processing. Thank you.

Full-time Description The Staff Professional / Staff Engineer supports engineering, geotechnical, and environmental projects by performing field observations, testing, analysis, reporting, and project coordination tasks. This position requires technical aptitude, a strong commitment to safety and quality, and the ability to work effectively in both field and office settings under the supervision of senior staff. Essential Duties and Responsibilities Field Observation and Testing Perform field and laboratory testing of soils, aggregates, concrete, masonry, asphalt, and other materials in accordance with applicable ASTM standards (e.g., ASTM D1557, D6938, C39, C231, etc.). Observe and document construction practices for compliance with approved project plans, specifications, and applicable codes. Operate specialized testing equipment such as nuclear density gauges, penetrometers, and concrete testing apparatus. Documentation and Reporting Accurately document all field observations and test results using proper English grammar and technical writing practices. Prepare clear, concise field and laboratory reports in a timely manner for internal review and client submission. Project Support and Management (as experience is gained) Assist in project setup including reviewing plans, obtaining project specifications, and coordinating schedules. Support project managers with scheduling technicians and field staff, communicating with clients, writing technical reports (e.g., footing letters, remedial recommendations), attending site visits, and participating in project meetings. Perform billing, review budget summary reports, and assist with collections as necessary. Uphold the company's professional image through consistent, positive client interaction and communication. Health and Safety Compliance Follow all safety protocols and company policies outlined in the Geo-Hydro Safety and Health Manual. Wear proper personal protective equipment (PPE) and participate in required safety training. Maintain awareness of site-specific hazards and promote a culture of safety. Business Development and Client Relations Attend networking or client engagement functions as assigned by supervisor. Assist with drafting technical proposals, scopes of work, and budgets. Additional Expectations Display professionalism in communication, dress, and behavior when representing the company. Demonstrate a willingness to learn and grow professionally under the guidance of senior staff. Support the company's mission and values through teamwork, accountability, and continuous improvement. Additional duties as required. Requirements Physical Requirements Lift, carry, and handle materials and equipment weighing up to 100 pounds. Maneuver heavy equipment such as concrete wheelbarrows (150-200 lbs), soil density hammers (25 lbs), and nuclear density gauges (up to 90 lbs). Perform physically demanding tasks such as swinging concrete test devices, hand augering up to 10 feet, or excavating with hand tools. Driving Requirements Possess and maintain a valid driver's license. Driving record must be insurable under the company's vehicle insurance policy, subject to the discretion of the company's carrier. Regular review of driving history will be conducted and may impact job duties or status. Minimum Education and Certifications Bachelor's degree from an accredited 4-year program in Civil Engineering, Geology, Environmental Science, or a related discipline. Successful completion of the Engineer-In-Training (EIT) or Geologist-In-Training (GIT) exam, or ability to obtain certification within a reasonable time. Pursuit of Professional Engineer (P.E.) or Professional Geologist (P.G.) registration when eligible is expected. Must possess or obtain relevant certifications including but not limited to ACI, ICC, OSHA 10/30-hour, and others as deemed necessary by supervision. Legal Disclosures and Conditions of Employment Drug-Free Workplace: This position is subject to pre-employment drug screening. All employees must comply with the company's Substance Abuse Policy as a condition of continued employment. At-Will Employment: Employment with Geo-Hydro Engineers, Inc. is at-will and may be terminated by either the employee or the company at any time, with or without cause or notice. Equal Opportunity Employer: Geo-Hydro Engineers, Inc. is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, sexual orientation, or any other characteristic protected by law.

The Systems Engineer is responsible for the proactive administration of the hardware platforms, operating systems and the dependent services for LFUSA. This includes the configuration, installation, deployment, monitoring and troubleshooting of server hardware, operating systems, and services, resolving outages and documenting designs, processes and procedures. Knowledge, Skills and Abilities Required: 3-5+ years of experience in the IT related industry 3-5+ years of operational systems and support experience in a large, dynamic TSM environment Advanced knowledge of back-up strategies and data loss risk remediation Strong operational knowledge of Microsoft Server platforms and technologies including Windows Server 2003/2008/2012, Citrix 4.X-5.X, IIS, DNS, and DHCP Strong operational knowledge of Redhat Linux and VM Linux Strong operational of storage methodologies including IBM v series, Netapp Strong working knowledge of the installation, configuration, recovery, SRM and administration of VMware ESX Server 4.X, 5.X in a large enterprise clustered/high availability environment Demonstrates commitment to providing customer focused quality service Proven ability to work in both a team environment and independently Experience with MS Exchange 2010 DAG's and application disaster recovery methodologies Some travel may be required Qualifications: Bachelors' degree in Computer Science, Information Systems preferred 3-5+ years hands on experience with Microsoft Windows 2003/2008/2012 as a Systems Engineer preferred 3-5+ years of hands on experience with Linux OS 3-5 years of hands on experience with Storage Systems administration 2+ years hands on experience with VMware ESXi 4.x/5.x Experience with 200+ VM's Experience with 100+ physical Intel based servers (preferably IBM X-Series) Excellent communications skills both written and verbal Ability and availability to work occasional nights/weekends assignments as necessary Additional Information Send me your resumes at vince@alphait. us Pozdrawiam / With best regards, Alpha Technologies Inc (USA) Vince Taylor Sr Technical Recruitment Specialist

Timmons Group is seeking qualified Civil Project Engineer I candidates for in our Greensboro, NC office. A Civil Project Engineer I is responsible for designing, building, supervising, operating, and maintaining large construction projects and systems, including roadways, piping systems, utilities, land grading specifications, and other infrastructural systems for commercial and residential building sites. Timmons Group is currently seeking candidates for the Land Development group. Essential duties and responsibilities of a successful candidate include but are not limited to: Design portions of a project using relevant office software, modeling and Civil 3D technology Complete calculations using engineering formulas and skills and/or utilizes computers in order to solve problems Prepare specifications materials through the use of research and manufacturing catalogs to specify materials, installation, inspection and payment of items specific to a project Work to complete design details and plan sets Perform research and writes objective summary reports which are used in the completion of the project work or inspection Assist in the preparation of engineering and construction cost estimates Complete field observation, inspection and data collection duties as directed by senior engineering staff Communicate with client staff and internal design team as directed by senior engineering staff Skills/Requirements of a successful candidate include but are not limited to: A bachelor's or master's degree in civil engineering or a closely related degree with coursework in land development, and/or water resources preferred EIT preferred Working knowledge of AutoCAD Civil 3D Additional Information The requirements listed are representative of the knowledge, skills and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. We are looking for high energy, creative, flexible, patient, self-starters who are willing to work at a dynamic pace. Candidates must share a commitment to our company's Vision, Mission and Shared Values. Timmons Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability, or protected Veteran status. Timmons Group is a full-service engineering and technology firm recognized nationally as a “Best Firm to Work For” by CE News. With over 15 offices throughout the Mid-Atlantic and Southeast, we provide civil engineering, environmental, economic development, GIS/geospatial technology, landscape architecture, and surveying services to a diverse client base. As one of Engineering News Record's (ENR) Top 500 Design Firms for over 30 years, we are dedicated to being an employer of choice and providing our people with the best resources, technology, and culture to help them thrive in an engaging career development setting. For more information, visit **************** #LI-CC1

Are you someone who is ready to dive right in and make an impact on exciting multimillion-dollar projects? If so, we are looking for motivated candidates to join our innovative team! Working alongside Project Managers and Estimators, you will assist in all aspects of the estimating and project management process. If you are self-motivated, and like to problem-solve, multi-task, and assume ownership of your work, contributing to the success of our projects, then apply today! Position Responsibilities: Assist in the estimating process as directed, including attending pre-bids, quantity take-offs, sub-bid solicitations Develop and update both a master and short interval schedule for distribution project control Provide weekly submission of quantities installed to be used for productivity reporting Complete document control procedures (Drawing Log) including issuance of relevant documents to sub trades Compile and submit required submittal packages with shop drawings for approval followed by completion and update of the submittal log Compile and track material status log Compile and update project punch list or issues matrix Review weekly productivity reports for potential areas of improvement with the Project Manager and Superintendent and suggest changes as needed Assist with coordinating sub-bid solicitations and procuring resources such as suppliers, manpower, and equipment Assist the Project Manager and Superintendent in daily coordination of subcontractors and suppliers Ensure proper documentation for any additional work Assist the Superintendent to ensure completion of “As Built” drawings Assist the Project Manager and Superintendent in completing project closeout requirements Maintain project file and shop drawing processing and assigned contract administration duties Prepare submittal package compilation Assist with financial management by writing and issuing change orders, approving material invoices, and tracking material, labor and equipment

Job Description The Project Engineer oversees the planning and execution of small-scale electrical and mechanical projects, including estimating and tracking budgets. This role focuses on driving technical improvements in coordination with the Technical, Operations, and Strategic Projects teams. Responsibilities Lead and implement technical improvement projects within budget and timeline. Work with other departments and provide technical support as needed. Create and manage project charters with clear scope, tasks, and deadlines. Oversee project execution, including follow-up, documentation, and training. Use MS Office, CAD, and project management tools to complete tasks efficiently. Qualifications 2 to 3 years of experience in a Project Engineer role. Background in food processing or light industrial manufacturing is an advantage. Practical experience working with mechanical systems, pneumatics, hydraulics, electrical, and electronic components. Demonstrated ability to lead and manage project teams. Skilled in using CAD software, Microsoft Project, Excel, and PowerPoint. Well-versed in OSHA safety regulations and compliance standards. Bachelor's or Master's degree in Engineering, or equivalent technical training in electrical, electro-mechanical, or mechatronics disciplines. PMP certification is preferred; Lean Six Sigma Green Belt is considered an asset. Strong proficiency in written and spoken English. Additional language skills in Dutch, French, Spanish, or German are an advantage.

Corvid Technologies seeks qualified candidates for our applied Aerodynamics group. Entry-level applicants should have advanced degrees (MS, Ph.D.) in aerodynamics with a focus in Computational Fluid Dynamics. Experienced applicants must be able to demonstrate a background of applying CFD methods to real-world problems with 2-5 years of experience. This position supports defense applications for a variety of missile performance programs that include both wind tunnel support and dynamic flight analysis. Corvid uses a variety of computational approaches to solve these problems using internally developed tools and methods. Responsibilities Grid generation and development on complex internal/external geometries Development and execution of CFD solutions and application of the results to systems of interest Day-to-day informal and formal report generation Support proposal development on an as-needed basis Requirements Ability to obtain a U.S. Security Clearance Strong background in fluid dynamics Strong background in Applied CFD methods Working knowledge of static and dynamic stability and flight dynamics modeling Excellent communication and problem-solving skills Ability to work in a team setting Outstanding time-management and multi-tasking skills Knowledge of CAD modeling, TAOS (or other 6-DoF) software, Pointwise software, and GNC experience are considered a plus Formula SAE and AIAA affiliation are considered a plus Candidates should be familiar with running and analyzing results from CFD applications, either commercial or research, but familiarity with a specific code is not a requirement. All candidates should be self-motivated and be able to demonstrate excellent written and oral communications skills as well as basic computer skills. Why Corvid: Founded in 2004, we are a group of over 300 engineers and scientists, about 3/4 with master' degrees or Ph.D.'s, that provide end-to-end solutions including concept development, design and optimization, prototype build, test and manufacture. We leverage the predictive capability of our high-fidelity computational physics solvers, indigenous massively parallel supercomputer system, prototyping plant, and ballistics and mechanics lab to investigate a variety of high-rate physics phenomena. The results are complex engineering solutions for a variety of applications; aircraft, ballistic missile defense, cybersecurity, motorsports, armor development, biological systems, and missile and warhead design and development. These results are achieved with optimal design and cost efficiency due to the predictive capability of Corvid's tools and our in-house, end-to-end integrated approach, which differentiates Corvid from the market. We value our people and offer employees a broad range of benefits. Benefits for full-time employees include: Paid gym membership Flexible schedules Blue Cross Blue Shield insurance including Medical, Dental and Vision 401k match up to 6.0%, Three weeks starting PTO; increasing with tenure Continued education and training opportunities Uncapped incentive opportunities All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or protected veteran status, or any other legally protected basis, in accordance with applicable law.

Basic Qualifications Requires a Bachelor's degree in Systems Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 2+ years of job-related experience, or a Master's degree and 6 months of job-related experience. Agile experience preferred. CLEARANCE REQUIREMENTS:: Department of Defense Secret security clearance is preferred at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As a systems engineer in this unique role, you'll help engineer the brains behind the brawn for ships, submarines, undersea networks and other advanced defense systems. We encourage you to apply if you'd like to experience a variety of different product families and locations. What sets you apart: Highly flexible and willing to quickly adapt to new teams Clear understanding of systems engineering concepts, principles, theories, and technical standards Clear understanding of requirements management and system modeling tools Creative thinker with ability to grasp and apply new information quickly and handle increasing responsibilities with growing complexity Team player who thrives in collaborative environments and revels in team success Commitment to ongoing professional development for yourself and others Our Commitment to You: An exciting career path with opportunities for continuous learning and development. Research oriented work, alongside award winning teams developing practical solutions for our nation's security Flexible schedules with every other Friday off work, if desired (9/80 schedule) Competitive benefits, including 401k matching, flex time off, paid parental leave, healthcare benefits, health & wellness programs, employee resource and social groups, and more See more at gdmissionsystems.com/careers/why-work-for-us/benefits Workplace Options: Due to the nature of this position, 75-80% travel may be required to support work at various GDMS sites. When not supporting work at other sites, you will be a part of the McLeansville, NC engineering team. #LI-Hybrid Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $90,833.00 - USD $100,767.00 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Manufacturing Engineer BH Job ID: 3617 SF Job Req ID: 16659 Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Manufacturing Engineer Location: Mocksville, NC About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: In this role as a Manufacturing Engineer, you will play a pivotal role in enhancing the efficiency and effectiveness of production processes. The Manufacturing Engineer is tasked with designing and refining manufacturing methods to boost productivity while maintaining high-quality standards and ensuring safety protocols. They work closely with various departments, such as design, quality, and operations, to implement improvements that reduce costs and streamline workflows. Responsibilities: * Suggests, evaluates, implements & manages multiple manufacturing projects from beginning to end * Evaluates, develops and implements machining processes on current or future assets * Implements capital equipment including evaluation, selection, run-offs, and implementation * Maintains manufacturing best practices including precision machining, lean manufacturing, and machine tool / tooling technologies * Evaluates non-conforming material and provides proper disposition * Leads special projects including NPD, insourcing, productivity and capital procurement * Designs tooling, gages and fixtures using 3D modeling software * Develops manufacturing routings internal and sub-con operations * Leads machine tool installations throughout the entire process * Supports production efforts through troubleshooting manufacturing issues * Ensures compliance with ISO 9001:2015 standards * Supports safety and environmental practices * Performs other duties assigned by immediate supervisor Requirements: * Bachelor's degree in manufacturing, Industrial or Mechanical engineering. * 4+ years of experience in manufacturing engineering. * Strong analytical ability to solve issues such as: manufacturing problems and dimensional or calculation errors. * Solid understanding of electro-mechanical assembly and machining processes and overall business operations. * Fluent using inspection tools, techniques and their application to the engineering requirements. * Comprehensive understanding of machine tool operations. * In-depth knowledge of CNC Programming, CAD / CAM / CAE, MS Office Software, and MS Project. * Competent in advanced engineering drawings including GD&T and tolerance analysis. Core Competencies: * Technical Expertise: knowledge of manufacturing processes and technologies. * Problem-Solving: Analytical skills to develop effective solutions. * Project Management: Ability to manage projects from start to finish efficiently. * Collaboration: Experience working with cross-functional teams. * Continuous Improvement: Familiarity with Lean Manufacturing and Six Sigma. * Attention to Detail: To ensure quality and compliance. * Innovation: Creative thinking to introduce new manufacturing solutions. * Leadership: Ability to train and guide production staff. * Safety Awareness: Strong understanding of and commitment to safety protocols. Preferences: * Ability to prioritize tasks, and carry out root cause analysis. * Ability to communicate at all levels internally, customers and suppliers. * Knowledge of Lean Manufacturing Techniques and ability to create standard work. * Fluent using inspection tools, techniques and their application to the engineering requirements. * Proficient in gear or helical grinding. * Understanding of rotary screw compressors and/or centrifugal compressors. * Excellent communication and interpersonal skills. Travel & Work Arrangements/Requirements: * Onsite with up to 15% travel. What We Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit *************

We are seeking an Electrical & Systems Engineer to join our IndyCar team. This role is responsible for the design, implementation, and maintenance of all electronic systems and radio communications on the car. The successful candidate will contribute directly to on-track performance and will be involved in race operations, development testing, and engineering projects from concept to completion. Responsibilities Maintain and troubleshoot all electronic systems to ensure accurate and repeatable data collection at the track. Possess strong working knowledge of all car systems to quickly diagnose and resolve issues. Work with vendors to select and integrate sensors for on-car and test rig applications. Build and maintain timing stands and trackside equipment. Design and build test fixtures to support overall vehicle performance. Design and layout circuit boards for test and pit equipment. Support the Systems Engineering group with car setup and calibration. Assist in the setup and maintenance of timing stands and other trackside equipment. Develop and maintain trackside tools to aid in car calibration and race performance. Assist in the setup and operation of 2-way radio communication systems. Manage fuel economy during race weekends, using collected data to determine fuel consumption and provide pit windows to the race strategist. Participate in engineering meetings, race debriefs, and test reviews to identify development opportunities. Contribute to development and wind tunnel testing as required. Take ownership of defined development projects from concept through execution. Follow technical specifications outlined by technical bulletins and team car build requirements. Establish and document testing and calibration procedures. Collaborate with the broader engineering team to ensure effective communication and development. Take a hands-on approach, driving projects from design to completion. Qualifications Bachelor of Science in Electrical or Mechanical Engineering (Electrical Engineering preferred). Minimum 3.0 GPA. Motorsports engineering background preferred but not required (IndyCar, NASCAR, IMSA, WEC, or F1 experience a plus). Strong knowledge of circuit design, diagnostics, and layout. Familiarity with basic circuit wiring. Extensive knowledge of data acquisition, data analysis, and statistical analysis. Strong analytical and problem-solving skills with a focus on innovation and continuous improvement. Effective verbal and written communication skills. Ability to work collaboratively with cross-functional teams. Coding experience recommended. Desired / Preferred Qualifications Experience with data acquisition systems (Cosworth, CAN communication). Experience with Arduino, Raspberry Pi, or similar systems. Proficiency with MATLAB, LabVIEW, and CAD software (NX, CATIA, Pro/ENGINEER, SolidWorks). Experience with 2-way radio communication systems. Motorsport wiring experience. SharePoint knowledge. Proficiency with Microsoft Office Suite; Power BI experience desired. Strong interpersonal and communication skills.

The Lead Hydraulics Engineer provides advanced technical leadership, system architecture expertise, and front-line support for both internal engineering teams and external customer development. This role drives the design and optimization of custom hydraulic systems for off-highway mobile equipment collaborating closely with Applications Engineering, Controls Engineering, and the Advanced Systems Team. Role duties would include some industrial system development as well as our mobile hydraulics systems focus. The Lead Hydraulics Engineer serves as the primary hydraulics technical contact for Account Managers and OEM customers, supports quoting and feasibility assessments, mentors junior engineers, develops design standards, and ensures successful system performance through production troubleshooting and continuous improvement. This position requires strong communication skills, the ability to lead technical discussions, and the capacity to manage multiple concurrent projects while meeting deadlines and quality expectations. This role is expected to evolve into formal leadership of the Hydraulics Engineering team, including supervision of multiple direct reports and participation in resource planning and performance development. ESSENTIAL FUNCTIONS * Design and optimize mobile hydraulic systems, producing schematics & circuits, and fabrication drawings for internal production and suppliers. * Support pre-sale feasibility, BOM development, and quoting, while providing technical guidance to engineering peers, sales, production, and customers. * Lead design reviews and perform component sizing, performance calculations, validation, troubleshooting, and optimization during prototype and production phases. * Contribute to hydraulic design standards, maintain knowledge of relevant regulations and industry practices, and participate in customer visits, field testing, and equipment evaluations as needed. ADDITIONAL RESPONSIBILITIES * Serve as the organization's primary hydraulics SME, mentoring junior engineers in design methodology, troubleshooting, and component selection. * Interface with Account Managers to support sales opportunity qualification and provide structured production support with feedback loops for continuous improvement. * Collaborate with Controls Engineering and the Advanced Systems Team to ensure proper integration of electrohydraulic controls and evaluate emerging technologies (e.g., smart valves, electrification). REQUIRED QUALIFICATIONS * Deep understanding of hydraulic components and system architectures, including load-sense, open-center, closed-center, and multi-function flow management. * Experience with mobile valve platforms and manifold circuit design (including DIN cartridge manifolds, stackable valve systems, and integrated hydraulic control assemblies), with competency in manifold block layout, optimization, and manufacturability. * Familiarity with electrohydraulic controls, CANbus interactions, performance curves, and the ability to troubleshoot systems using diagnostic tools and measurement instrumentation. * Proficiency in CAD/3D modeling for schematic and manifold design (Autodesk Inventor, AutoCAD, HydroSym/HydroMan), with knowledge of relevant manufacturing processes (machining, welding, hose assembly, etc.). PREFERRED QUALIFICATIONS * 7-12 years of experience designing hydraulic systems for mobile or off-highway equipment, including support of OEM production volumes. * Prior leadership experience providing mentorship or directing technical work, with exposure to electrification, hybrid integration, etc. * Knowledge of reservoir optimization, thermal management, noise mitigation strategies, and related system performance considerations. REQUIRED FUNCTIONAL COMPETENCIES * Strong analytical and troubleshooting skills with the ability to identify root causes, recommend corrective actions, and translate customer requirements into functional system architectures. * Effective prioritization and time-management in multi-project environments, with solid understanding of engineering change control and revision management. * Strong communication skills, capable of presenting complex technical topics to non-technical stakeholders and interpreting mechanical, hydraulic, and electrical schematics. * Collaborative mindset with team-building instincts, contributing positively to cross-functional work and organizational culture. PHYSICAL & MENTAL REQUIREMENTS * Ability to work in both office and shop environments, including exposure to machining, fabrication, and assembly noise, and occasional lifting of components up to 40 lbs during prototype evaluations or commissioning activities. * Comfortable standing, bending, and reaching while reviewing equipment or troubleshooting systems, with the ability to maintain focus and meet deadlines in high-pressure environments. * Ability to travel to customer sites, vendor facilities, and job locations as required (typically < 20%).

Responsibilities Design and develop structures, subassemblies, and mechanical components of truck and trailer bodies or ambulances using CAD software such as Solid Edge, SolidWorks, or AutoCAD Inventor. Create detailed 3D models of sheet metal parts, assemblies, and manufacturing drawings with appropriate tolerances and material specifications. Perform engineering calculations and analyses (structural, load, and performance) to validate designs. Support production through technical drawings, BOMs, process documentation, and engineering change management. Collaborate cross-functionally with manufacturing, purchasing, and quality departments to ensure design intent is maintained through production. Review and improve existing designs for manufacturability, cost efficiency, and durability. Research materials, components, and manufacturing methods for potential implementation in future designs. Participate in prototype builds and testing to evaluate design performance and validate design changes. Ensure compliance with applicable safety, regulatory, and customer standards. Provide technical support for field issues and product improvement initiatives. Essential Skills Bachelor's degree in mechanical engineering or equivalent. 3-5 years of prior work experience within a manufacturing setting outside of college or internships. Proficiency in Solid Edge and SolidWorks. Knowledge of MS Office products (Word, Excel, PowerPoint, Outlook). Experience with Epicor ERP. Ability to responsibly handle confidential information. Additional Skills & Qualifications Strong understanding of mechanical design principles, fabrication methods, and structural analysis. Knowledge of materials (steel, aluminum, composites) and their applications in vehicle manufacturing. Understanding of structural adhesives and their uses. Ability to interpret engineering drawings, specifications, and standards. Strong problem-solving, analytical, and organizational skills. Excellent communication and teamwork abilities. Familiarity with manufacturing processes such as welding, forming, and assembly. Experience with Epicor ERP systems is a plus. Work Environment The work environment involves a manufacturing setting with exposure to weather, noise, and moving mechanical parts. The role requires a mix of desk work using CAD software and physical presence on the manufacturing floor. Physical demands include occasional lifting of up to 30 lbs and specific vision abilities. This company is an equal opportunity employer and provides accommodations upon request during the selection process. Job Type & Location This is a Permanent position based out of High Point, NC. Pay and Benefits The pay range for this position is $70000.00 - $80000.00/yr. Have copy of benefits to share. Workplace Type This is a fully onsite position in High Point,NC. Application Deadline This position is anticipated to close on Jan 22, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

The Imaging Service Engineer I will be responsible for providing preventative maintenance, troubleshooting, and repair of advanced imaging systems in a hospital environment, while ensuring a high level of customer service and equipment reliability. What You'll Do: Install, maintain, calibrate, and repair complex diagnostic imaging equipment including but not limited to CT, C-arm, portable X-ray, and ultrasound systems. Utilize technical and customer service skills to assess and resolve imaging equipment issues efficiently. Collaborate with clinical staff and other healthcare professionals to identify and resolve equipment-related issues. Document service activities and maintain accurate records within the department's tracking systems. Participate in on-call rotation schedule and provide emergency support as needed. What You Bring: Knowledge of diagnostic imaging systems. Demonstrated expertise in troubleshooting and resolving technical issues with imaging equipment. Proficiency with common test equipment, tools, and diagnostic software. Excellent communication, interpersonal, and time-management skills. Experience working in a hospital or healthcare environment. Associate degree in Electronics, Biomedical Engineering, or related technical field preferred; military or OEM training a plus. Position Summary: Inspect, repair, maintain, and calibrate basic diagnostic imaging equipment, devices, system, and instruments. Interact on a routine basis with other clinical health providers in the identification of technology-based problems. Key Duties: Inspect, maintain, repair and calibrate equipment and systems Provides advanced support of equipment for direct patient care Interacts on a routine basis with clinical health providers in the identification of technology-based problems and solutions Solves organization-level customer service issues and complaints Preparing required documentation and reports Ensures regulatory compliance Demonstrates a safety mindset Financial responsibility for purchasing parts and service Minimum Qualifications & Requirements: Minimum Education Requirement - Associates Degree (or equivalent experience) in electronics, biomedical engineering, or other technical discipline contributing to proficiency of maintenance and repair of imaging equipment within a healthcare environment Minimum Functional Experience - 3 years of experience within a healthcare setting with direct responsibility for the maintenance and repair of clinical devices and/or 1 year of imaging equipment repair and maintenance within a healthcare environment and/or entry level of formalized training and/or equivalent military training. MUST HAVE: Associates Degree (or equivalent experience) in electronics, biomedical engineering, or other technical discipline contributing to proficiency of maintenance and repair of imaging equipment within a healthcare environment 3 years of experience within a healthcare setting with direct responsibility for the maintenance and repair of clinical devices and/or 1 year of imaging equipment repair and maintenance within a healthcare environment and/or entry level of formalized training and/or equivalent military training. Demonstrated expertise in troubleshooting and resolving technical issues with imaging equipment. Proficiency with common test equipment, tools, and diagnostic software. Experience working in a hospital or healthcare environment.

The Systems Engineer is responsible for the proactive administration of the hardware platforms, operating systems and the dependent services for LFUSA. This includes the configuration, installation, deployment, monitoring and troubleshooting of server hardware, operating systems, and services, resolving outages and documenting designs, processes and procedures. Knowledge, Skills and Abilities Required: 3-5+ years of experience in the IT related industry 3-5+ years of operational systems and support experience in a large, dynamic TSM environment Advanced knowledge of back-up strategies and data loss risk remediation Strong operational knowledge of Microsoft Server platforms and technologies including Windows Server 2003/2008/2012, Citrix 4.X-5.X, IIS, DNS, and DHCP Strong operational knowledge of Redhat Linux and VM Linux Strong operational of storage methodologies including IBM v series, Netapp Strong working knowledge of the installation, configuration, recovery, SRM and administration of VMware ESX Server 4.X, 5.X in a large enterprise clustered/high availability environment Demonstrates commitment to providing customer focused quality service Proven ability to work in both a team environment and independently Experience with MS Exchange 2010 DAG's and application disaster recovery methodologies Some travel may be required Qualifications: Bachelors' degree in Computer Science, Information Systems preferred 3-5+ years hands on experience with Microsoft Windows 2003/2008/2012 as a Systems Engineer preferred 3-5+ years of hands on experience with Linux OS 3-5 years of hands on experience with Storage Systems administration 2+ years hands on experience with VMware ESXi 4.x/5.x Experience with 200+ VM's Experience with 100+ physical Intel based servers (preferably IBM X-Series) Excellent communications skills both written and verbal Ability and availability to work occasional nights/weekends assignments as necessary Additional Information Send me your resumes at vince@alphait. us Pozdrawiam / With best regards, Alpha Technologies Inc (USA) Vince Taylor Sr Technical Recruitment Specialist