Field Engineer
Staff engineer job in Wausau, WI
A Senior Imaging Service Specialist (SISS) performs and documents planned maintenance and repair of medical diagnostic imaging equipment and associated systems under the supervision from service management to perform the required duties. The SISS must possess and demonstrate a highly advanced knowledge and ability to use the required test equipment and have the required electronic and mechanical knowledge and skills. The SISS must have the ability to interpret and effectively utilize service manuals, schematics and other applicable service information required to perform and document planned maintenance and repair of the diagnostic imaging equipment and systems. The SISS must demonstrate advanced organizational skills as well as effective communications, mentor developing technical staff, interpersonal and customer relations skills as applied to interactions with company personnel and Clinical staff in accordance with established Renovo operational and personnel policies and procedures.
Specific Responsibilities:
Independently and under service management supervision performs general troubleshooting and repairs to the block circuit and component level. Also, independently and under service management supervision performs installations, calibrations and planned maintenance.
Proper use of all standard test equipment:
multimeter e. invasive and non-invasive imaging test devices
oscilloscope f. service software and keys
dosimeter g. hand and power tools
AC line analyzer h. phantoms
Be able to read, analyze, interpret and follow signal flow on blueprints, schematics and wiring diagrams. Exercise good system troubleshooting skills
Proven demonstration in understanding basic aspects of clinical applications and image quality requirements related to medical imaging equipment.
Specific Responsibilities (continued):
Perform and be available for after-hours service, also available for emergency calls on weekends.
May be required to participate in shift scheduling and reasonable travel.
Serve as a mentor to developing imaging and technical team members.
Service manage original equipment manufacturer-mandated equipment updates/upgrades and satisfactorily complete the required recordings of all work performed in RENOVO's CMMS.
*Perform other duties as assigned and capable in scope and under the leadership of a RENOVO supervisor.
Required Competencies
Accountability - takes ownership of assigned work and responsibilities, follows through and closes the loop
Communication - clearly expresses thoughts and ideas both in written and verbal communications, provides timely information
Financial Acumen - Considers financial impact of all decisions
Integrity - Can admit mistakes, is direct and truthful
Customer Service - demonstrates a “customer-first” mentality, focused on meeting the needs of customers and captures feedback to make improvements
Priority Setting - Prioritizes assigned schedules and workload
Knowledge - Thorough understanding of diagnostic imaging devices and equipment including specialized training
Team Building - Mentors newer technicians, facilitates clear communication amongst the team, demonstrates care and respect for co-workers and colleagues
Attributes
Culture - promotes the RENOVO culture and the culture of the healthcare facility
Mechanically inclined - technical skills and abilities to figure out how things work
Self-motivated - can work on their own or under limited direction while prioritizing equipment schedules and repair activities.
Open-minded - Willing to listen to opinions and criticism, can switch directions quickly
Agility - Can perform tasks in a safe, timely manner
Attributes continued:
Improvement - willing to learn and grow, wants to update job skills for career growth
Confidence - Self-reliant decision maker that doesn't second guess decisions
Multi-tasker - Is organized and efficient, handles multiple projects or tasks simultaneously
Results Driven: Is focused on results and outcomes, is goal oriented
Humility - Has a sense of humor, is humble, and can handle stressful situations
Skills, Knowledge and Abilities:
High school diploma or equivalent education required.
A.S. Degree in Biomedical or Electronics Technology or equivalent education preferred.
Minimum of five (5) years' experience in the service and maintenance of medical imaging equipment with advanced emphasis on a specific modality equipment type(s).
Successful completion/credentialed thru either an accredited Independent Training Organization, Original Equipment Manufacturer or Military equivalent Basic Level I and Level II, Level III and Level IV Imaging Equipment Service Training Course(s). Specialization to an advanced imaging modality equipment type is required.
Exceptional organizational skills required.
Excellent written and verbal communication skills required.
Required Work Hours
Forty hours per week during daytime and evening hours. Scheduled work hours may change. Overtime may be required or permitted with prior approval. This position is included in the on-call rotation for the facility.
Physical And Mental Requirements
Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Travel
Reasonable scheduled travel may be requested of this position periodically.
Classification
FLSA: Non-exempt
Reporting And Supervisory Responsibilities
The SISS reports to the assigned Manager.
This position may have supervisory responsibilities assigned.
Administration:
Understand and observe company policies and accounting procedures.
Represent and promote the company in a professional manner.
Relationships:
Utilize teamwork in your daily activity and ensure customer satisfaction.
Other:
Safety - Understand and follow good safety procedures:
Radiation c. Mechanical
Electrical d. Magnetic
Training - Willingly participate in company training programs.
Housekeeping - Maintain a clean, orderly appearance of all work areas.
Personal appearance - Must observe company dress code at all times and must have good personal hygiene.
Maintain all RENOVO owned equipment including tools, test equipment, computers, and others as specified in proper working condition and ensure annual calibration where appropriate.
Driver's License - Must maintain an active driver's license in the state of operation.
Note: This position description does not list every activity, duty, and responsibility of the position and may be altered by RENOVO at any time.
EEO Statement
RENOVO Solutions provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, RENOVO Solutions complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.
RENOVO Solutions expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of RENOVO's employees to perform their job duties may result in discipline up to and including discharge.
Employee signature below constitutes employee's understanding of the requirements, essential functions and duties of the position. Also, acknowledges that a change in duties with or without notice can occur at any time. Employee is an “at-will” employee and this does not act as a contract of employment.
Pay rate: $45-$56/hr.
Staff Engineer - Structural
Staff engineer job in Milwaukee, WI
Company: Kapur & Associates
Structural Engineer
About Kapur:
Kapur & Associates is a well-established, employee-owned consulting engineering firm with a 40-year track record of delivering engineering, survey, site design, transportation, municipal, construction inspection, and construction management services to clients throughout the United States. Our team has expanded to encompass over 400 professionals, and we maintain multiple offices in Wisconsin, Illinois, Kentucky, Indiana, and Pennsylvania.
At Kapur, we're looking for candidates who share our ALL-IN commitment to excellence. We are seeking individuals who are passionate about their work, have a strong work ethic, and are committed to delivering outstanding results. We value teamwork, and we are looking for individuals who are collaborative and enjoy working in a team environment.
Summary:
Kapur welcomes experienced candidates for our Structural Engineer team. This highly motivated individual will join the team in the Transportation Department, based in either our Milwaukee, WI office or in Madison, Wisconsin, where you will develop design solutions for high profile major bridge projects.
Responsibilities:
Perform technical discipline tasks including analysis, reports, design, and specifications.
Design and review design related calculations, reports, plans and specifications.
Coordinate with internal project teams and clients to address issues or concerns related to design.
Be part of business development pursuit, building client relationships.
Qualifications:
Bachelor's degree in civil engineering with a structural emphasis
10 years of relevant work experience
Familiarity with AASHTO Bridge Design Specifications
Prior experience using Leap Bridge, MicroStation, CONSPAN, and LPile is a plus
Professional Engineer (PE) License
Prior experience on WisDOT bridge design projects will be a plus.
Kapur
is an Affirmative Action / Equal Opportunity Employer. We use E Verify to confirm the eligibility of employees to work in the United States.
Mechanical Engineer (Solidworks)
Staff engineer job in Shawano, WI
4-6 years of experience in Off-Highway and Mining domain (Construction & Mining Domain) with expertise in SOLIDWORKS
Experience in working with cross-functional and different cultural teams across the globe. Preferably should have worked in Europe or the USA as an on-site coordinator and managed teams.
Should have hands-on experience in new product design and development of components made of Sheet Metal, machined castings, and plastics
Coordinating with offshore team for project assignments & Delivery planning, ept development, and Pro Problem solving
Should understand manufacturing processes and material selection
Must have experience of project planning, estimation & scheduling
Assist in the definition of project scope and objectives, involving all relevant internal stakeholders and ensuring technical feasibility
Manage changes to the project scope, project schedule, and project costs in consultation with offshore ADM
Manage the relationship with the client and relevant stakeholders
Create and maintain project documentation
Meet with customers to take detailed project briefs and clarify specific requirements of each project
Good communication and interpersonal skills
Product Engineer (Bluebird Turf Equipment)
Staff engineer job in Mayville, WI
Metalcraft of Mayville Metalcraft of Mayville is an Equal Opportunity Employer:Minorities/females/veterans/individuals with disabilities/sexual orientation/gender identity Product Engineer (Bluebird Turf Equipment) US-WI-Mayville Type: Regular Full-Time
# of Openings: 1
Category: Engineering
Scag Power Equipment
Overview
As a Product Engineer at Metacraft of Mayville and Scag Power Equipment located in Mayville WI, you will support our Bluebird Turf Equipment line of products by providing technical engineering and product management support to assembly, quality, service and purchasing teams.
Responsibilities
In addition you will:
Work with new product development team to introduce new product to the production floor for our Bluebird Turf Equipment product lines.
Work with manufacturing to insure successful implementation and launch of new designs.
Perform assembly line audits to insure Scag products are being built to meet quality standards and units are functioning properly
Work with assembly team and quality control team to diagnose and resolve issues
Work with purchasing team to qualify and approve new components from existing and new suppliers
Manage cost savings and product improvement initiatives
Review Bill of Materials for new designs and prepare cost estimates based on supplier quotes and internal estimates
Review quality rejects and determine appropriate disposition
Analyze and diagnose product warranty and assure proper solution is implemented
Qualifications
We need an excellent communicator, who is self-motivated and can multi-task in a fast paced team environment. You will need exceptional analytical skills for problem solving, with a Bachelor's degree in Mechanical or Agricultural Engineering and design experience.
A strong candidate will have 3-5 years' experience in the following:
CAD drafting/ modeling using Pro-E/Creo
Ability to manage other team members
Bill of Material construction
SAP data entry and analysis
Product design
Component selection and supplier communication
Manufacturing support experience
Equal Opportunity Employer-minorities/females/veterans/individuals with disabilities/sexual orientation/gender identity.
PM17
Compensation details: 7.24-7.25
PI313a734d318f-37***********2
Municipal Project Engineer
Staff engineer job in Green Bay, WI
COMPANY PROFILE
Cedar Corporation is a professional service firm with disciplines in engineering, architecture, environmental, planning, landscape architecture, and land surveying.
Founded in 1975, the company has grown to its present staff of 100. Our staff is dedicated to the principles on which the firm was developed: professionalism, state-of-the-art technology, and service to clients. We have continued to grow because of our commitment to providing comprehensive services and maintaining good communication with our clients.
JOB OPPORTUNITY
Cedar Corporation is a growing company, that offers a professional, yet flexible work environment. We are seeking a full-time, highly motivated, self-starter to join our team as a Municipal Project Engineer in our Green Bay office.
RESPONSIBILITIES
Preparation and development of design plans.
Provide design assistance and review for municipal infrastructure projects.
Provide assistance with technical feasibility studies.
Preparation of details, specifications, and bidding documents.
Preparation of regulatory permits for projects.
Construction observation and administration.
Work with current clients.
Attend seminars, conferences, and training sessions.
QUALIFICATIONS
· Bachelor's Degree
· Engineer-In-Training or Licensed Professional Engineer, WI
· 3+ years of related engineering experience required
· AutoCAD Civil 3D experience
· Proficient with Microsoft Office Software.
· Excellent oral and written communication & presentation skills.
An equal opportunity employer.
LabVIEW development engineer
Staff engineer job in Brookfield, WI
, project work.
Design and develop automated systems for manufacturing testing of new product development.
Utilize LabVIEW programming in system and fixture development.
Select and implement the appropriate sensors/transducers to measure such elements as force,
torque, current, and velocity.
Participate in LabVIEW code reviews
Review and thoroughly understand product function and design specifications.
Provide project updates to engineering leadership on status, risks, and priority.
Utilize programming languages such as LabView, C++, C#, PLC's .
Work with test development, automation, data-acquisition, and fixture
development.
Work with communication protocols, such as IO-Link, Discrete IO, EtherCAT, EthernetIP, OPCUA, TCP/IP, RS-232, RS-485, CAN
Work with test and measurement techniques, including sensor technology, signal conditioning, data acquisition and manufacturing test development.
Qualifications
3+ years recent experience creating LabVIEW programs from scratch
Experience creating LabVIEW programs that talked with multiple instruments and communicated to databases
Project Engineer
Staff engineer job in Whitewater, WI
GEA is one of the largest suppliers for the food and beverage processing industry and a wide range of other process industries. Approximately 18,000 employees in more than 60 countries contribute significantly to GEA's success - come and join them! We offer interesting and challenging tasks, a positive working environment in international teams and opportunities for personal development and growth in a global company.
Responsibilities / Tasks
Please note: This position is based in the United States and does not offer visa or work sponsorship. Applicants must be authorized to work in the U.S. without current or future sponsorship.
GEA Group, founded in Germany in 1881, is a global leader in engineering solutions, serving industries such as food and beverage, pharma, dairy, and more. With over 18,000 employees worldwide and a strong U.S. presence since 1929, GEA combines the heritage of a well-established company with the innovation of a forward-thinking industry leader. At GEA, we're not just building equipment, we're building lasting careers with an average employee tenure range from 5 to over 11+ years, reflecting the strong culture, growth opportunities, and support we provide.
Start strong - Medical, dental, and vision coverage begins on your first day
Recharge and refresh - Enjoy 12 paid holidays, including a flexible floating holiday, and 136 hours of PTO to relax or explore
Invest in your future - A 7% 401(k) employer match helps grow your retirement savings faster
Keep learning - Take advantage of tuition reimbursement to further your education or skillset
Live well - Our wellness incentive program rewards healthy habits
Get support when you need it - Access to a confidential Employee Assistance Program for personal or professional guidance
Save smart - Flexible Health Savings and Spending Accounts to manage out-of-pocket expenses
As a Project Engineer at GEA, you'll be the technical engine behind complex projects. From kickoff to commissioning, you'll manage all phases with precision and passion.
What You'll Do:
Lead cross-functional collaboration with engineering, procurement, production, and service teams.
Serve as the customer's trusted technical contact from order to delivery and beyond.
Oversee sub-contractors and field activities for successful installations.
Analyze specifications and review product designs to meet project goals.
Create and manage project timelines using SAP and MS Office tools.
Provide technical support to sales and service teams - be the go-to expert!
Ensure every project hits its mark in quality, timing, and customer satisfaction.
Your Profile / Qualifications
Bachelor's degree in Mechanical, Chemical, Industrial Engineering or related field.
2-5 years applicable experience.
Proven ability to juggle multiple projects and deliver on time.
Strong communicator with excellent verbal/written skills and customer focus.
Skilled at building strong working relationships - internally and externally.
Passion for solving complex problems with process equipment or technical systems.
Proficiency in Microsoft Office; SAP experience is a plus.
Experience with wastewater or energy projects is a strong bonus.
At GEA, we don't just offer jobs-we offer opportunities to thrive, grow, and make an impact.
The typical base pay range for this position at the start of employment is expected to be between $80,000 - $100,000 per year. GEA Group has different base pay ranges for different work locations within the United States.
The pay range is not a guarantee of compensation or salary. The estimated range is the budgeted amount for the position. Final offers are based on various factors, including skill set, experience, location, qualifications, and other job-related reasons. You may be eligible for additional rewards.
GEA is an equal opportunity employer. Applicants will therefore receive consideration for employment without regard to age, sex, race, color, religion, world view, national origin, genetics, disability, gender identity, marital status, sexual orientation, veteran status or any other protected characteristic required by applicable law. Applicants with disabilities are welcome and will be given special consideration if they are equally qualified.
#Engineeringforthebetter
Did we spark your interest?
Then please click apply above to access our guided application process.
Machine Learning Engineer
Staff engineer job in Milwaukee, WI
At Mercor, we're building the talent engine that helps leading labs and research orgs move AI forward. Our latest initiative focuses on benchmarking and improving model performance and training speed across real ML workloads. If you're an early-career Machine Learning Engineer or an ML PhD who cares about innovation and impact, we'd love to meet you.
## What to Expect As a Machine Learning Engineer, you'll tackle diverse problems that explore ML from unconventional angles. This is a remote, asynchronous, part-time role designed for people who thrive on clear structure and measurable outcomes. - **Schedule:** Remote and asynchronous-set your own hours - **Commitment:** ~20 hours/week - **Duration:** Through December 22nd, with potential extension into 2026 ## What You'll Do - Draft detailed natural-language plans and code implementations for machine learning tasks - Convert novel machine learning problems into agent-executable tasks for reinforcement learning environments - Identify failure modes and apply golden patches to LLM-generated trajectories for machine learning tasks ## What You'll Bring - **Experience:** 0-2 years as a Machine Learning Engineer or a PhD in Computer Science (Machine Learning coursework required) - **Required Skills:** Python, ML libraries (XGBoost, Tensorflow, scikit-learn, etc.), data prep, model training, etc. - **Bonus:** Contributor to ML benchmarks - **Location:** MUST be based in the United States ## Compensation & Terms - **Rate:** $80-$120/hr, depending on region and experience - **Payments:** Weekly via Stripe Connect - **Engagement:** Independent contractor ## How to Apply 1. Submit your resume 2. Complete the System Design Session (< 30 minutes) 3. Fill out the Machine Learning Engineer Screen (engineering, and research use Mercor to work on frontier projects shaping the next era of AI.
Design Engineer
Staff engineer job in Milwaukee, WI
WHO WE ARE
AVI-SPL is a digital enablement solutions provider who transforms how people and technology connect to elevate experiences, create new value, and enable organizations to thrive and grow. We are the largest provider of collaboration technology solutions, which include our award-winning managed services.
Our highly certified industry experts and innovation leaders share a vision to help people work smarter and live better. We believe that success starts with a sound team and that an inclusive and diverse workplace moves us all forward.
WHAT YOU'LL DO
A Design Engineer 1's main function is to provide presales support by acting as a technical consultant to the sales force, generating functional system descriptions, block flow diagrams and equipment lists to enable generation of customer proposals. A Design Engineer 1 is also leveraged by the post sales team for project engineering and or ongoing project consultation.
Day-To-Day Responsibilities:
Ability to translate customer requirements into functional system designs.
Review pre-construction design and documentation
Provide assistance with technical design and level of effort needed by estimating hours and highlighting logistical challenges for the sales team to consider while pricing the opportunity.
Generate functional system descriptions and block diagram
Identify all cabling and miscellaneous material needs
Assist Account Manager with labor and material estimates for projects
Assume ownership of project installation when required
Develop engineering and architectural (RCP/Floor Plan) drawings, calculation, acoustical modeling or other data as required
Provide on-going engineering support and assist with project sign-off
Meet with vendors/prospective vendors to help evaluate product as requested
WHAT WE'RE LOOKING FOR
Must Haves:
Communicate and interact with internal employees, clients and colleagues in a professional and timely manner
Proven business writing skills
Proficient with test and calibration equipment
Support user acceptance testing
Understand basic IP networking
Ability to diagnose complex system problems
Advanced computer skills as required for the design, configuration, and operation of AV equipment
Ability to work and think independently and ensuring to meet deadlines
Effective communication and interaction with employees, clients and colleagues
Valid Driver's License and a Motor Vehicle Record that meets AVI-SPL driving standards
Minimum of a High School Diploma
Nice-To-Haves:
Formal education in Electronics or related field preferred
At least five years of AV experience is preferred
A minimum of 1-2 years of AV experience plus a four year degree or military experience may be considered
Experience with Enterprise VC solutions (Zoom, Microsoft Teams, Google Meet, Bluejeans, Cisco Telepresence etc.) - both hardware and software
AVIXA General CTS (Certified Technical Specialist) is preferred
WHY YOU'LL LIKE WORKING HERE
Medical benefits, including vision and dental
Paid holidays, sick days, and personal days
Enjoyable and dynamic company culture
Training and professional development opportunities
MORE ABOUT US
AVI-SPL is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, disability status, or membership in any other group protected by federal, state, or local law. AVI-SPL is an AA/Disabled/Veteran Protected Employer VEVRAA Federal Contractor.
AVI-SPL reserves the right to alter work hours and work location as necessary. Work hours may vary based on client requirements and may include travel to various locations in support of the account.
Electrical Engineer
Staff engineer job in Madison, WI
Fathom Recruitment has teamed up with C-Motive to bring you another great opportunity!
Are you a motor controls expert looking for an opportunity to innovate and put your hands on a world-changing technology? C-Motive, a startup in Middleton, Wisconsin, is seeking a Motor Controls Engineer to join our rapidly expanding team.
In this newly created role, you would assist C-Motive in commercializing a patented electrostatic motor technology with a focus on sustainability and efficiency. This technology, which was developed at UW-Madison, is projected to be the first of its kind on the market and has the potential to save a gigaton of carbon in the next decade.
The Motor Controls Engineer will be responsible for architecting and developing the control systems for C-Motive's electrostatic motor drives. This role requires a strong background in linear systems analysis and controller design, along with proficiency in tools like MATLAB/Simulink. With this role, you will have the opportunity to collaborate with hardware and software teams to integrate motor control solutions into larger motor/drive systems.
What you will do:
Develop control algorithms, write embedded firmware in C/C++, and create simulation models.
Perform bench and in-vehicle testing and troubleshoot system issues.
Write, test, and debug embedded C/C++ code for motor controllers and Electronic Speed Controllers (ESCs).
Develop performance models in MATLAB/Simulink to simulate and analyze motor and system performance.
Who you are:
A master's or PhD in electrical engineering/computer science with an emphasis on machine and power electronics control systems is required.
The ideal candidate will have at least 10 years of experience in high-performance motor and/or multilevel power converter control systems.
A strong understanding of AC and DC motor types, drive systems, and control theory is necessary.
Experience with PID loop control strategies and knowledge of PWM (Pulse Width Modulation) schemes are important.
The candidate should have hands-on experience with closed-loop vector control, whether sensor-based or sensorless.
Past design experience implementing motor control strategies for various motor types, such as Fuzzy Logic Control (FLC) or Field-Oriented Control (FOC), is also desired.
Why work with us:
C-Motive offers a generous benefits package, including a "take-what-you-need" paid time off program, paid parental leave, a 401k program, and stock options.
The company is an equal opportunity employer committed to creating an inclusive and diverse environment.
Relocation assistance is also available.
Our complete job description can be found HERE
Fathom Recruitment and our clients adhere to an equal employment opportunity policy. All candidates are referred based on their qualifications only, without regard for their race, sex, age, religion, national origin, sexual orientation, marital status, veteran status, or any other protected class or characteristic.
Mechanical or Design Engineer
Staff engineer job in Oshkosh, WI
Interviews are happening quickly on these...
Looking for Design engineers CAD designers and Mechanical engineers.
Also need project engineers as well.
Multiple positions in Oshkosh.
Several openings please send your resume I'll call you right away with all the details especially compensation, which is always important.
Here's my direct email or you can just send through LinkedIn.
Thank you for your consideration.
Derek Kunz
*********************
Mechanical Engineer III - Metal Cutting Machine Tools
Staff engineer job in Fond du Lac, WI
Accountability:
Mechanical Engineer III for metal cutting machine tool products. Responsible for researching, designing, developing, and testing company products by producing design layouts, detail drawings, machine (line and foundation) layouts, material lists and proposal drawings accurately, economically, on schedule and in accordance with Giddings & Lewis and industry standards. In addition, perform other duties as assigned by manager, provide technical support for the sales, manufacturing, and service of company products; develop engineering concepts for product features and new product offerings; participate in special assigned projects; and assist other engineering personnel with projects.
Scope and Responsibilities:
Essential duties include, but are not limited to the following:
Proactively attains a safe and healthy work environment for all employees.
Utilizes extensive creativity, mechanical design ability, and good interpersonal skills.
Design and coordinate the development of portions of machine tools and related equipment and systems requested by sales and/or customers and for new product offerings.
Creates designs that are functional, safe, reliable, economical, serviceable, and marketable.
Creates design layouts and detail part drawings.
Performs engineering analysis.
Specifies machine components, materials, and purchased parts.
Meets product plan goals and schedules.
Conducts and/or participates in design reviews.
Facilitate the development and quoting of special equipment and features by evaluating technical feasibility and application, analyzing costs, developing engineering concepts, and participating in market surveys.
Establishes machine specifications, develops procedures and evaluation criteria for engineering and performance testing of new and existing designs.
Provide certified machine layout (line and foundation) drawings for the customer on schedule.
Provides accurate design documentation according to Giddings & Lewis and industry engineering standards.
Enhances the marketability, manufacturability, and performance of company products by providing support for the sales, manufacturing, and technical services functions.
Assists manufacturing engineering with manufacturing problems by incorporating changes in designs for more economic manufacturing techniques.
Communicates effectively with suppliers and customers when needed.
Improves overall company and engineering efficiency and effectiveness by participation in special assignments and projects.
Keeps abreast of new developments in technology and competitive products.
Knowledgeable and proficient in the use of company and industry standards.
Knowledgeable and proficient in the use of PLM (Agile) and ERP (SAP) systems.
ISO 9001 &14001 awareness and compliance
Education/Certification:
Bachelor's degree (B.S.) from four-year college or university in Mechanical Engineering or other related engineering degree.
Must be a U.S. citizen or have permanent residency status (green card).
Experience:
5+ years industrial related experience.
Experience preferred:
Metal cutting machinery (milling, turning, drilling, boring, etc.).
Automatic part handling, automation, or robotics.
Automatic assembly equipment.
Workholding fixtures.
Tooling.
Specialized mechanisms.
Machined weldments, structural components.
Precision machined parts.
Rotating assemblies.
Skills:
Strong mechanical aptitude.
Understanding and experienced with principles and practices of machine design.
Experience selecting materials.
Understanding of machine shop practices.
Organized, detailed thought processes.
Self-directed with excellent work ethic and strong time-management skills.
Ability to work in focused teams.
Work in a timely manner and accurately.
Share ideas and work with other professionals.
Adapt to changing priorities quickly and effectively.
Strong ability for creation and structuring of parts, sub-assemblies, assemblies, and bills of material.
Familiarity with electrical devices and components.
Ability to apply geometric (ASME Y14.5) and precision tolerancing.
Ability to effectively communicate with written and verbal skills appropriate to the position.
3D CAD design skills (company utilizes Siemens NX) with adherence to engineering standards, guidelines, and practices.
2D CAD design skills with AutoCAD with adherence to Engineering standards, guidelines, and practices.
Proficient with Microsoft Excel, Outlook, Word.
Test & Development Engineer
Staff engineer job in Oshkosh, WI
The Engineer - T&D under the guidance and supervision from the senior engineering staff, plan, coordinate and work with technicians to accomplish projects involving heavy-duty vehicles test and/or development.
Responsibilities:
Under close supervision, perform basic engineering calculations, investigations, and tasks as assigned according to Client as well as general industry engineering standards and processes.
Support Senior Engineers in the preparation of basic plans, designs, computation methods, and/or reporting.
Under close supervision, work on projects of limited complexity in a support role.
Collaborate as needed with other engineering or business support disciplines internally as well as suppliers externally.
Assist with establishing of requirements for testing of heavy-duty vehicles and associated equipment according to the needs of the project.
Recommend what equipment resources are necessary to accomplish the test.
Assist in formulating project estimates.
Assist in creating test plans and implementing them via communication to engineers and technicians.
Create plans for fixtures and test apparatuses and supervise their construction and development.
Coordinate, supervise and monitor progress of testing.
Recommend corrective actions needed to maintain schedule and cost targets.
Communicate the status and results of tests as needed.
Ability to travel 10%.
Support TIR resolution meetings.
Support Prototype team member safety discussions.
Research, plan, and execute testing related to standard.
Identify opportunities within defined standards to support the projects.
Other duties as assigned.
Regular attendance is required.
Requirements:
Experience in automotive or heavy-vehicle equipment.
Core Competencies:
Internal Contacts: Contact with peers and others involving explanation of information (these contacts may be within or outside department or division), and the gathering of factual information; may include the communication of sensitive or confidential information.
External Contacts: Limited external contact to: gather information, answer queries, or ask assistance.
Communication Skills: Read, write and comprehend simple instructions, short correspondence and memos; Read and interpret safety rules, operating/maintenance instructions and procedure manuals; Write routine reports, correspondence and speak effectively before both internal and external groups; Read, analyze and interpret business manuals, technical procedures and/or government regulations: Read, analyze and interpret scientific and technical journals, financial reports and legal documents.
Decision-Making: Regularly makes decisions of responsibility, involving evaluation of information. Decisions may require development or application of alternatives or precedents.
Complexity, Judgment and Problem Solving: Generally structured work, but involving a choice of action within limits of standard policy and procedures.
Supervisory/Managerial: General instructing, scheduling, and reviewing the work of others performing the same or directly related work. Acts as "lead worker”.
Education:
Accredited Bachelor's degree in Engineering or related field with Internship experience or six (6) or more months of related work experience.
Electrical Engineer (La Crosse)
Staff engineer job in La Crosse, WI
About Crown:
CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture, and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers, and consumers alike. With operations in 39 countries employing approximately 25,000 people and net sales of approximately $12 billion, we are uniquely positioned to bring best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Sustaining a leadership position requires us to build a team of highly talented, dedicated, and driven individuals.
DIVISION OVERVIEW:
Crowns Beverage Division manufactures a variety of packaging solutions for soft drinks, craft beers, coffees, and teas as well as new energy drinks. Crown Beverage leads the packaging industry with innovative technologies that redefine how the world looks at beverage cans. With a large printable surface area and a wide range of sizes, shapes and decorating options, our aluminum cans are the perfect packaging format to create compelling brand presence where it counts. Here is your chance to join the Crown Beverage Division.
LOCATION:
Crown Beverage Packaging located in LaCrosse, WI has 117 employees. Surrounded by stunning bluffs and lying alongside the mighty Mississippi River, La Crosse is home to over 20 miles of beautiful scenic trails. The plant is also located just minutes from the historic downtown which hosts unique shops, lively entertainment, museums, art galleries and more. La Crosse is close to major highways such as I-94 and the approximate distance from the La Crosse Airport is about 7 minutes.
POSITION OVERVIEW:
The Electrical Engineer works closely with all aspects of the manufacturing process from the raw material to the finished product and support daily productions activities. This is a managerial position, which would include the daily supervision of plant electricians and electronic technicians as well as the management of plant construction, modifications, appropriations, and equipment installation.
DUTIES AND RESPONSIBILITIES:
Reporting directly to the Plant Engineer, the Electrical Engineer responsibilities would include, but not be limited to, the following:
Applies electrical theory and related knowledge to test and modify developmental or operational electrical machinery, electrical control equipment, and circuitry in industrial plant setting
Oversees assembly and testing of experimental motor control devices, switch panels, transformers, generator windings, and other electrical equipment and components according to engineering data and knowledge of electrical principles
Diagnoses cause of electrical or mechanical malfunction or failure of operational equipment and performs preventative and corrective action
Develops diagrams, drawings and specifications for modifications or expansions and directs personnel performing routine installation and maintenance duties
Plans, directs, and records periodic testing; recommends or initiates modification or replacement of equipment as needed
Directs, coordinates, develops, trains, coaches and assesses employees
Supports and encourages employees to work safely, efficiently, and effectively
Performs other job-related duties as required or assigned
In addition to the specific responsibilities listed above, the ideal candidate will possess the following:
Minimum Requirements
Bachelors degree in Electrical Engineering or equivalent experience plus an Associates degree
Five to seven years of experience in a high-speed manufacturing environment
At least three years of proven supervisory experience
Working knowledge of motor controls, VFDs, DC drives, Eddy Current Systems and/or Modicon system design
Installation, set-up and programming of PLCs (Allen-Bradley)
Ability to design, modify and plot using AutoCAD software
Process control systems set-up and program applications (Honeywell)
Instrumentation and calibration knowledge
Facility power distribution to include voltage up to 4160v, three-phase
Knowledge of building facilities (compressed air, water, hydraulics, vacuums, heating and cooling)
Knowledge of control systems and sub-systems
Must be available to work various shifts if needed and be able to work nights, weekends, and overtime to cover absences or provide additional support
Approximately 10% overnight travel
Preferred Requirements
Packaging industry experience
Electrical Journeymans certification
Green or black belt certification in Six Sigma
Competencies
Ability to work independently or with a team
Strong problem-solving skills through an individual and/or collaborative approach
Must be able to look at new solutions and think outside the box
Effective leadership skills such as conflict resolution, communication, decision making, etc.
Demonstrated employee relations skills and the ability to motivate people
Excellent time management and project management skills as well as the ability to multi-task
Excellent oral and written communication skills
Strong computer skills and working knowledge of various Microsoft programs (Excel, Word, Access, etc.)
Physical Requirements
While performing the duties of this job, the associate is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl
The associate may lift and/or move up to 10 pounds
Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus
Working Conditions
Generally works in a plant environment but will be required to perform some job duties inside a typical office setting
While performing the duties of this job, associate will be exposed to power sources
While performing the duties of this job, the associate may be exposed to moving mechanical parts and vehicular traffic
The associate may be exposed to a wide range of temperatures
The noise level is frequently loud
Possible Equivalent Military Titles
Electronics Technician; Radar and Sonar Operator; Electronic Instrument and Equipment Repairer; Communications Equipment Operator; Avionics Technician
*Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
BENEFITS:
Crown offers competitive pay, comprehensive benefits including FREE company paid health insurance for employees as well as company matched 401(k).
INTERESTED: Take the next step in your career and apply online today at **************************
EEO/AA/Vets/Disabled
Product Engineer (Scag Power Equipment)
Staff engineer job in Mayville, WI
Metalcraft of Mayville Metalcraft of Mayville is an Equal Opportunity Employer:Minorities/females/veterans/individuals with disabilities/sexual orientation/gender identity Product Engineer (Scag Power Equipment) US-WI-Mayville Type: Regular Full-Time
# of Openings: 1
Category: Engineering
Scag Power Equipment
Overview
As a Product Engineer at Scag Power Equipment located in Mayville WI, you will support Scag Power Equipment products by providing technical engineering and product management support to assembly, quality, service and purchasing teams.
Responsibilities
In addition you will:
Work with new product development team to introduce new product to the production floor for our Scag Power Equipment product lines.
Work with manufacturing to insure successful implementation and launch of new designs.
Perform assembly line audits to insure Scag products are being built to meet quality standards and units are functioning properly
Work with assembly team and quality control team to diagnose and resolve issues
Work with purchasing team to qualify and approve new components from existing and new suppliers
Manage cost savings and product improvement initiatives
Review Bill of Materials for new designs and prepare cost estimates based on supplier quotes and internal estimates
Review quality rejects and determine appropriate disposition
Analyze and diagnose product warranty and assure proper solution is implemented
Qualifications
We need an excellent communicator, who is self-motivated and can multi-task in a fast paced team environment. You will need exceptional analytical skills for problem solving, with a Bachelor's degree in Mechanical or Agricultural Engineering and design experience.
A strong candidate will have 3-5 years' experience in the following:
CAD drafting/ modeling using Pro-E/Creo
Ability to manage other team members
Bill of Material construction
SAP data entry and analysis
Product design
Component selection and supplier communication
Manufacturing support experience
Equal Opportunity Employer-minorities/females/veterans/individuals with disabilities/sexual orientation/gender identity.
PM17
Compensation details: 7.24-7.25
PI9819000e7432-37***********0
Project Engineer - Site Design
Staff engineer job in Milwaukee, WI
Company: Kapur & Associates
Project Engineer
About Kapur:
Kapur & Associates is a well-established, employee-owned consulting engineering firm that has been providing engineering, survey, site design, transportation, municipal, construction inspection, and construction management services to clients across the United States for over 40 years. We have grown to over 400 professionals and have multiple offices in Wisconsin, Illinois, Kentucky, Indiana, Pennsylvania, and Florida.
At Kapur, we're looking for candidates who share our ALL-IN commitment to excellence. We are seeking individuals who are passionate about their work, have a strong work ethic, and are committed to delivering outstanding results. We value teamwork, and we are looking for individuals who are collaborative and enjoy working in a team environment
Summary:
Kapur is seeking a dedicated and skilled Project Engineer to join our Site Design department in Downtown Milwaukee, WI. The ideal candidate will have a bachelor's degree in civil engineering and a Professional Engineer (PE) license. This individual will be responsible for grading and utility design using Civil 3D to deliver high-quality engineering solutions.
Responsibilities:
Assist in the preparation and design of civil engineering projects.
Perform grading and utility design using Civil 3D software.
Collaborate with the Site Design team to develop project plans, specifications, and estimates.
Conduct site visits and field inspections to gather data and assess project requirements.
Compliant with local, state, and federal regulations.
Communicate effectively with team members, clients, and other stakeholders.
Qualifications:
Bachelor's degree in civil engineering.
Professional Engineer (PE) License is required.
Proficiency in Civil 3D software desired.
4-8 years of experience with site design and land development projects.
Familiarity with local, state, and federal engineering standards and regulations.
Strong understanding of grading and utility design principles.
Excellent problem-solving skills and attention to detail.
Ability to work collaboratively within a team environment.
Effective verbal and written communication skills.
Eagerness to learn and grow in a professional engineering setting.
Benefits:
ESOP (Employee Stock Ownership Plan)
Competitive salary and benefits package.
Opportunities for professional development and career growth.
Collaborative and supportive work environment.
Located in the vibrant Downtown Milwaukee area with easy access to local amenities.
Join Kapur and contribute to impactful civil engineering projects that shape our communities. We look forward to welcoming a new member to our dedicated team.
Kapur
is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
Manufacturing Engineer
Staff engineer job in Appleton, WI
We are seeking a manufacturing engineer to join our dynamic production team. The ideal candidate will be responsible for improving manufacturing processes, driving operational efficiency, and supporting production operations with a focus on safety, quality, and continuous improvement. This hybrid role blends industrial engineering principles with hands-on manufacturing support, offering opportunities to work directly on the shop floor while contributing to long-term process enhancements.
Key Responsibilities:
Develop, evaluate, and improve manufacturing processes and methods.
Collaborate with production, quality, and maintenance teams to troubleshoot and optimize operations.
Design, procure, and implement tools, fixtures, and equipment for manufacturing.
Conduct time studies, workflow analysis, and line balancing to improve productivity and efficiency.
Implement lean manufacturing principles (5S, Kaizen, value stream mapping, etc.) to reduce waste and improve flow.
Support New Product Introduction (NPI) activities, including process validation and documentation.
Prepare and maintain process documentation, SOPs, and work instructions.
Track and report production metrics (cycle time, downtime, scrap, OEE).
Participate in root cause analysis and corrective/preventive actions (CAPA).
Contribute to continuous improvement initiatives across safety, quality, and productivity.
Assist with layout improvements, equipment integration, and workflow optimization.
Learn and apply ERP/MES systems for production planning and tracking.
Qualifications:
Bachelor's degree in Mechanical, Manufacturing, or Industrial Engineering (or related field).
3+ years of experience in a manufacturing or production engineering role.
Proficiency in CAD software (SolidWorks, AutoCAD, or similar).
Strong understanding of lean manufacturing, Six Sigma, and continuous improvement methodologies.
Familiarity with ERP/MES systems and production scheduling.
Strong analytical, organizational, and problem-solving skills.
Excellent verbal and written communication skills.
Willingness to work directly on the shop floor and gain hands-on experience.
Proficiency in Microsoft Excel and basic data analysis tools.
Manufacturing Engineer
Staff engineer job in Galesville, WI
Responsibilities / Tasks
The Manufacturing Engineer is responsible for planning, directing, and coordinating manufacturing processes in an industrial plant. This role involves optimizing the use of facilities, equipment,materials, and personnel to boost operational efficiency. Additionally, the engineer is tasked with overseeing the development, implementation, and maintenance of quality standards for industrial processes, materials, and products, ensuring they meet or exceed expectations. They collaborate with various departments to drive continuous improvement and ensure efficient and safe manufacturing operations.
Design and implement efficient manufacturing processes.
Identify and execute process improvements to boost productivity.
Work with design teams on new products ensuring manufacturability.
Conduct root cause analysis and implement corrective actions.
Develop and maintain SOPs and manufacturing guidelines.
Evaluate and select equipment and tooling.
Lead or participate in improvement projects like Lean Manufacturing and Six Sigma.
Provide technical support and training to production staff.
Collaborate with suppliers for quality materials and equipment.
Stay updated with industry trends and best practices
Your Profile / Qualifications
Bachelor's in Mechanical, Industrial, or Manufacturing Engineering (advanced degree a plus).
3+ years of experience in manufacturing or process optimization.
Strong knowledge of Lean Manufacturing, Six Sigma, Kaizen.
Proficient in CAD and manufacturing software.
Excellent analytical, problem-solving, and communication skills.
Ability to manage multiple projects independently.
Hands-on experience with machining, fabrication, and assembly preferred.
Knowledge of regulatory standards (ISO, FDA) desirable.
Benefits:
12 Paid Holidays
PTO
Medical, Dental, and Vision Insurance
Health Savings and Spending Accounts
Tuition Reimbursement
401k with employer match
Wellness Incentive Program
Employee Assistance Program
GEA Group is committed to fostering an inclusive work environment where all clients and employees feel welcomed, accepted and valued. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.
#engineeringforthebetter
Did we spark your interest?
Then please click apply above to access our guided application process.
Machine Learning Engineer
Staff engineer job in Sheboygan, WI
At Mercor, we're building the talent engine that helps leading labs and research orgs move AI forward. Our latest initiative focuses on benchmarking and improving model performance and training speed across real ML workloads. If you're an early-career Machine Learning Engineer or an ML PhD who cares about innovation and impact, we'd love to meet you.
## What to Expect As a Machine Learning Engineer, you'll tackle diverse problems that explore ML from unconventional angles. This is a remote, asynchronous, part-time role designed for people who thrive on clear structure and measurable outcomes. - **Schedule:** Remote and asynchronous-set your own hours - **Commitment:** ~20 hours/week - **Duration:** Through December 22nd, with potential extension into 2026 ## What You'll Do - Draft detailed natural-language plans and code implementations for machine learning tasks - Convert novel machine learning problems into agent-executable tasks for reinforcement learning environments - Identify failure modes and apply golden patches to LLM-generated trajectories for machine learning tasks ## What You'll Bring - **Experience:** 0-2 years as a Machine Learning Engineer or a PhD in Computer Science (Machine Learning coursework required) - **Required Skills:** Python, ML libraries (XGBoost, Tensorflow, scikit-learn, etc.), data prep, model training, etc. - **Bonus:** Contributor to ML benchmarks - **Location:** MUST be based in the United States ## Compensation & Terms - **Rate:** $80-$120/hr, depending on region and experience - **Payments:** Weekly via Stripe Connect - **Engagement:** Independent contractor ## How to Apply 1. Submit your resume 2. Complete the System Design Session (< 30 minutes) 3. Fill out the Machine Learning Engineer Screen (engineering, and research use Mercor to work on frontier projects shaping the next era of AI.
Cost Engineer
Staff engineer job in Fond du Lac, WI
Casting and Machining - 50 to 60% work (Majority work)
Injection Molding - 20 to 30% work
Costing Software - BTD or apriority tool
These 2 core areas are further supported by other commodities like Stamping, Fabrication, Wiring harness etc. Candidate should have Mechanical background with excellent communication where he needs to work with other stakeholders like Engineering team, Design team and suppliers.
Job Description & Skill Requirement
Key Responsibilities:
Provide guidance to Designers/Design Engineers for proposed new or modified designs to achieve required function at minimum cost.
Apply design for assembly (DFA) and design for manufacturing (DFM) tools to analyze proposed new designs and propose potential improvements.
Work with engineering on a Design to Target approach in early product development planning
Develop cost targets for mechanical engine parts (Castings, Stamped parts, Extrusions, and injection molded) based on information ranging from sample parts, CAD models and engineering drawings.
Develop cost targets for electrical engine parts (Harness, PCB, PCB assemblies, DC motors, Batteries) based on information ranging from schematics, CAD models and engineering drawings.
Provide should-cost analysis reports to procurement team for supplier negotiation purposes.
Do competitive benchmarking/ teardown analysis and develop should cost models.
Participate in value analysis (VA) and value engineering (VE) activities and generate cost reduction ideas on current production products.
Present project cost updates along with risks and opportunities to higher management on monthly basis.
Be a resource of cost information on assigned projects for the entire organization (upper management, marketing, sales, engineering, financial, manufacturing, etc).
Provide the organization with monthly cost reports and cost tracking of current product.
Diversity of thought and experiences is fundamental when imagining the unimaginable. Certain skillsets/experiences are necessary; however, others can be developed along the way.
Required Qualifications:
Bachelor's degree in Mechanical, Manufacturing, Industrial or Electrical Engineering
3-5 years of industry experience
Proficient in BDI (Boothroyd Dewhurst Inc), A-priori or related costing software
Ability to read and understand manufacturing drawings
Working knowledge of a Bill of Material, its development and application.
Practical knowledge of VA/VE techniques and strong financial awareness
Functional understanding of 3D CAD software (Creo Preferred)
Proficient in Microsoft office.
Travel up to 10%
Preferred Qualifications:
In-depth knowledge of Manufacturing processes (Casting, Stamping, Injection molding, extrusion, PCBA) and compatible materials.
Lean Six Sigma Green Belt Preferred.