Senior Electrical Engineer jobs at Staffing Resources - 4110 jobs

Under direction, perform varied professional and electrical engineering work at an advanced level of difficulty in the field and office. Perform assessments of and prepare written reports documenting the existing electrical systems and loads at existing facilities. Work with other engineers and technicians on design of new facilities and rehabilitation/retrofit of existing facilities. May supervise subordinate engineering personnel engaged in design and construction work. May act as resident engineer on major capital improvement projects and as oversight engineer on in-house maintenance and repair projects. Interpret, explain and carry out electrical engineering design, inspection and construction methods and procedures. Responsibilities include regular contact with other professional engineering personnel, as well as contractors and their representatives, and the general public, obtaining and providing technical electrical engineering data and information, preparing, checking and reviewing detailed and complex electrical engineering plans, specifications and related reports. Perform related duties as required. Essential Responsibilities Performs assessments of electrical systems and prepare written reports documenting the capacity and limitations of the systems Performs detailed engineering calculations and analysis in connection with electrical design of utility systems for transportation facilities Prepares and supervises the preparation of detailed electrical engineering designs, drawings, specifications, cost estimates and quantity estimates for a wide range of electrical construction and maintenance projects Works with other in-house and consultant engineering professionals and technicians to develop, prepare and finalize complete sets of construction bid documents for capital improvement and other construction projects Reviews consultants submittals and work products to ensure compliance with required scope of work and deliverables Reviews contractors' work to ensure compliance with plans and specifications Plans, schedules and coordinates detailed phases of engineering work either as part of a major project or for an entire project of smaller scope Makes investigations of contractual and construction problems that may arise on construction projects Inspects and supervises a wide variety of ordinary and complex construction projects to ensure compliance with contract plans and specifications Assists in the preparation of complex contract documents Conducts correspondence and prepare technical engineering reports in connection with a wide variety of projects Knows and follows the safety and health rules and safe working practices applicable to their job Ensures that employees under their supervision follow established safe work practices and obey all safety rules Meets and consults with department officials, engineers and contractors on technical engineering matters Regular and reliable performance and attendance are required Senior Electrical Engineer | Job Details tab | Career Pages #J-18808-Ljbffr

Site Supervisor (MEP) Location: Data Center and Commercial sites - United States - Travel will be required across all states. Employment Type: Full-time / Contract Salary: $55,000 - $95,000 + package A leading data center construction and engineering organization is seeking a skilled and motivated Site Supervisor to oversee building or mechanical/electrical (MEP) activities within critical data center environments. The successful candidate will ensure that all on-site construction, maintenance, and repair operations are executed safely, efficiently, and in full compliance with established procedures and industry standards. This position requires a strong understanding of data center systems, excellent organizational skills, and the ability to lead diverse teams in high-performance environments. Key Responsibilities Supervise and coordinate all on-site activities related to building construction or MEP systems, depending on area of specialization. Enforce adherence to safety, security, and operational protocols within live data center environments. Manage and oversee subcontractors, ensuring quality work, safety compliance, and schedule adherence. Conduct regular site inspections to identify and mitigate potential hazards, risks, or compliance issues. Maintain detailed records and documentation, including permits, inspections, and safety logs. Collaborate closely with data center operations teams to minimize downtime and avoid disruption to critical infrastructure. Communicate effectively with project managers, engineers, and stakeholders to align on project goals and deliverables. Diagnose and resolve technical issues promptly to maintain project continuity. Ensure all work complies with relevant building codes, regulations, and industry best practices (e.g., NFPA, OSHA). Participate in pre-construction planning, offering insights on constructability, risk, and scheduling. Skills & Qualifications Proven experience supervising building construction or MEP projects; data center experience is a plus. Strong understanding of data center operations and critical infrastructure systems. Excellent knowledge of safety regulations, building codes, and industry standards. Demonstrated ability to lead subcontractors, manage resources, and maintain timelines. Strong communication, leadership, and problem-solving abilities. Proficiency in reading and interpreting technical drawings, blueprints, and schematics. Competent in Microsoft Office Suite and project management software. OSHA certification preferred.

Cannon Corp Description: You'll Come for a Job But You'll Stay for an Exciting Career! Engineering and Designing Reliable, Responsive, Solutions. SINCE 1976, CANNON has provided creative solutions to clients in the energy industry, water resources, public infrastructure, and commercial and residential development. We work hard. We play hard. We have fun. JOIN CANNON as a CIVIL SENIOR PRINCIPAL ENGINEER to grow and shape Cannon's Water Resource operations in Orange County, based in our IRVINE office . Irvine offers warm weather, beautiful scenery, and is a top bicycling city with miles of on-road bicycle lanes and mountain bike trails. It is one of the safest communities and the public schools have consistently ranked among the best in California. PROJECTS INCLUDE Wastewater Treatment Facilities, Collection Facilities, Water Distribution Systems, Water Treatment Plants, Storm Drainage Collection Systems and Facilities, Water Main Replacements, Potable Water Pump Stations and Reservoirs. CIVIL SENIOR PRINCIPAL ENGINEER JOB SUMMARY The Civil Senior Principal Engineer role is a leadership opportunity to grow and Cannon's Water Resources operations in Orange County. Reporting to the Director of Water Resources, this role will conduct and drive business development efforts with Orange County agencies and clients; oversee and manage a diverse portfolio of wastewater, water treatment, and other water resource projects; mentor engineers; and provide excellent client service and delivery. CIVIL SENIOR PRINCIPAL ENGINEER JOB DUTIES Responsible for securing new work by establishing and fostering client relations and developing proposals (scope, schedule, and fee estimates). Develops and maintains strong relationships with ongoing clients and actively seeks to expand services to them. Concurrently manages a variety of civil engineering Public Works-Water Resources projects. Tracks project scope, budgets, and schedules to ensure fulfillment of contract commitments and profitability. Primary interface with clients on project coordination and design and follow-up to ensure quality standards are met, efficiency levels are maintained, and client satisfaction, respect, and confidence are assured. Effectively manages quality assurance and quality control. Uses technical knowledge to prepare PSandE for water resources projects, including water, sewer, and storm drains (pipelines, pump stations, lift stations, storage reservoirs, etc.). Grows, leads, and mentors an Orange County Water Resources team. Directs and mentors project engineers and design engineers on technical matters and procedures and acts as a technical resource to staff. Regularly engages in professional/community activities that promote the Cannon brand (writing, speaking, etc.). Requirements: Requires a Bachelor's degree in Civil Engineering from an accredited college. Requires a minimum of 15 years' experience in Civil Engineering specifically pertaining to Public Works/Water Resources projects. Requires minimum 8 years of project management experience pertaining to Public Works/Water Resources projects. Requires a California P.E. license. Working knowledge of typical computer software programs used in civil engineering design (AutoCAD, Civil3D, Hydrology and Hydraulic, AES, WSPG, Flowmaster, etc.) Must be proficient with MS Office Suite. A proven track record and strong desire to provide superior client service and delivery. Proven ability to manage multiple projects and deliver on time within budget. Experience in staff management, mentoring and resource management a plus. WE OFFER competitive salaries, excellent benefits package, remote work flexibility, and an active and positive team building, work environment. Cannon is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, age. Compensation details: 00 Yearly Salary PIaa1ed-1949

A professional engineering organization is looking for a Senior Electrical Engineer in San Francisco to perform advanced electrical engineering work, including assessments, design, and compliance reviews for various projects. The candidate will lead projects, supervise engineering personnel, and ensure adherence to safety standards and best practices. This role requires a licensed Professional Engineer and entails significant collaboration with contractors and other engineering professionals. Relevant experience in utility systems and project management is essential. #J-18808-Ljbffr

Cannon Corp Description: You'll Come for a Job But You'll Stay for an Exciting Career! Engineering and Designing Reliable, Responsive, Solutions. SINCE 1976, CANNON has provided creative solutions to clients in the energy industry, water resources, public infrastructure, and commercial and residential development. We work hard. We play hard. We have fun. JOIN CANNON as a CIVIL SENIOR PRINCIPAL ENGINEER in WEST LOS ANGELES. West Los Angeles is known for its many popular recreational opportunities and our office is conveniently located adjacent to the Expo MetroLink Commuter line. CIVIL SENIOR PRINCIPAL ENGINEER JOB SUMMARY As a California licensed PE, responsible for project management (scope, schedule and budget), preparing engineering reports and analyses, designing and preparing plans, specifications, and cost estimates for a variety of Public Works projects. Assignments will include mentoring less-experienced team members. In this role, the Project Manager will also be responsible for obtaining new business (seller-doer). CIVIL SENIOR PRINCIPAL ENGINEER JOB DUTIES Concurrently manages a variety of civil engineering Public Works projects. Tracks project scope, budgets and schedules to ensure fulfillment of contract commitments and profitability. Conducts business development and creates proposals and presentations. Effectively manages quality assurance and quality control. Uses technical knowledge to prepare PSandE for transportation (roadway and intersection widening, street rehab, streetscape improvements, complete streets, etc.), storm drain (hydrology and hydraulics) and water quality BMPs. Primary interface with clients on project coordination and design and follow-up to ensure quality standards are met, efficiency levels are maintained, and client satisfaction, respect and confidence are assured. Directs/mentors project engineers and design engineers on technical matters and procedures and acts as a technical resource to staff. Requirements: Bachelor's degree in Civil Engineering from an accredited college. A California P.E. license in Civil Engineering. Minimum 15 years' experience in Civil Engineering specifically pertaining to Public Works projects. Minimum 8 years' of project management experience pertaining to Public Works projects. Minimum 5 years' experience managing a team and direct reports. Experience in business development. Strong relationship with local agencies. A proven track record and strong desire to provide superior client service and delivery. Proven ability to manage multiple projects and deliver on time within budget. Experience in staff management, mentoring and resource management. WE OFFER competitive salaries, excellent benefits package, remote work flexibility, and an active and positive team building, work environment. Cannon is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, age. Compensation details: 00 Yearly Salary PI595115aabc57-1947

A leading engineering firm in San Francisco seeks an Electrical Engineering New Grad. This entry-level role offers experience in designing electrical systems and collaborating with clients. You will use tools like AutoCAD and Revit under mentorship from experienced engineers. Ideal candidates will have a BS in Electrical Engineering and strong analytical skills. The position offers a competitive salary range of $81,000 - $85,000 and comprehensive benefits, promoting career growth and development in a supportive environment. #J-18808-Ljbffr

Altera .Design Verification page is loaded## Design Verificationlocations: San Jose, California, United Statestime type: Full timeposted on: Posted Yesterdayjob requisition id: R01697# **Job Details:**### ## **Job Description:**Altera is a leading FPGA (Field-Programmable Gate Array) company that delivers programmable hardware, software, and development tools to drive innovation from cloud to edge. With over four decades of experience in programmable logic, our broad portfolio includes FPGAs, CPLDs, IP, SmartNICs, IPUs, and System on Modules-supported by industry-leading tools like the Quartus development suite.Recently re-established as an independent business (with Intel retaining a minority interest), Altera is focused on accelerating programmable compute in AI, networking, communications, industrial, automotive, aerospace/military, and edge-computing domains.Our mission is to provide leadership programmable solutions that are easy to design and deploy, and our vision is to pioneer innovation that unlocks extraordinary possibilities.We are seeking a Sr Silicon Design Verification Engineer (on-site) who can perform the following functions* Performs functional logic verification at multiple levels ( block, subsystem and full chip )* Defines and develops scalable and reusable block, subsystem, and SoC verification plans, test benches, and the verification environment to meet the required level of coverage and confirm to microarchitecture specifications.* Executes verification plans and defines and runs emulation and system simulation models to verify the design, analyze power and performance, and uncover bugs.* Replicates, root causes, and debugs issues in the pre-silicon environment. Finds and implements corrective measures to resolve failing tests.* Collaborates and communicates with Architects, micro architects, full chip architects, RTL developers, post silicon, and physical design teams to improve verification of complex architectural and microarchitectural features.* Documents test plans and drives technical reviews of plans and proofs with design and architecture teams.* Incorporates and executes security activities within test plans, including regression and debug tests, to ensure security coverage.* Maintains and improves existing functional verification infrastructure and methodology.* Absorbs learning from post-silicon on the quality of validation done during pre-silicon development, updates test plan for missing coverages, and proliferates to future products### ## **Qualifications:**Minimal Qualification:* Candidate should have a BS, MS or PhD in Electrical or Computer Science Engineering or related field with 3-5+ years of technical experience.* Validation/Verification. Related technical experience should be in/with: Pre Silicon* OVM/UVM, System Verilog, constrained random verification methodologies. Preferred Qualification* Design Verification with developing, maintaining, and executing complex IPs and/or SOCs.* The complete verification life cycle (verification architecture, test plan, execution, debug, coverage closure).* Developing validation test suites and driving continuous improvement into existing validation test suites and methodologies.* Scripting experience with TCL/PERL/Python etc.,* Formal verification experience,* Experience in either Ethernet / PCIe / MACSEC / IPSEC protocols & FPGA architecture or FPGA prototyping### ## **Job Type:**Regular### ## **Shift:**Shift 1 (United States of America)### ## **Primary Location:**San Jose, California, United States### ## **Additional Locations:**### ## **Posting Statement:**All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance. #J-18808-Ljbffr

We are seeking a highly skilled and innovative Electrical Engineer to join our dynamic team. In this role, you will be responsible for designing, developing, and testing electrical systems that meet project specifications. The ideal candidate will possess a strong foundation in electrical engineering principles, complemented by expertise software such as AutoCAD, MEP, Navisworks and Revit. This position offers an opportunity to work with a collaborative team in a company with outstanding benefits. Duties Design and develop electrical systems, schematics, and PCB layouts using AutoCAD, Revit, and CAD software to meet project requirements. Conduct root cause analysis on electrical failures or system malfunctions to identify issues and develop corrective actions. Collaborate with architects, structural, and MEP trades t identify and resolve spatial conflicts using clash detection tools. Develop project schedules ensuring timely delivery of milestones while managing resource allocation effectively. Create detailed schematics and documentation for manufacturing using NEC standards and industry best practices. Apply knowledge of electrical codes such as NEC to ensure compliance during design and installation phases. Participate in coordination meetings to review progress and resolve design and construction issues. Qualifications Bachelor's degree in Electrical Engineering PE required. Strong proficiency in CAD tools including AutoCAD, Revit, SolidWorks, MicroStation, and schematic capture software. Experience in the commercial construction industry. Strong understanding of electrical systems and construction documentation. Ability to interpret drawings, specifications and construction documents. Excellent problem-solving skills complemented by effective communication abilities across diverse teams. Strong organizational skills with experience managing project scheduling in fast-paced environments. Join our team as an Electrical Engineer to contribute your expertise toward shaping future projects.

Are you ready to elevate your career in electrical engineering? Join our team and seize an exceptional opportunity to lead a talented group of engineers in a dynamic work environment. Enjoy the benefits of exceptional tenure, a comprehensive benefits package with an out-of-pocket cost for family as low as $35, and a lucrative salary and bonus structure. Experience autonomy and the chance to make a significant impact in a heavy manufacturing facility. Required Qualifications Bachelor's degree in Electrical Engineering Minimum 5 years of experience in an industrial or heavy manufacturing facility Proven experience leading or managing engineering teams Experience with Allen-Bradley PLCs and software (RSLogix 500, RSLogix 5, Studio 5000, and FactoryTalk View ME) Experience designing and reading one-line diagrams, electrical schematics, and wiring diagrams for industrial electrical and control systems Ability to troubleshoot electrical systems (hydraulic and pneumatic systems a plus) AutoCAD experience a plus Responsibilities Lead and develop a team of 5 electrical engineers Design and upkeep of existing plant electrical systems Design electrical distribution and control schemes for new equipment Create one-line diagrams and schematics for new and existing equipment Work with suppliers and contractors when purchasing and installing equipment Assist maintenance in troubleshooting and repair of equipment, including instructing maintenance on proper troubleshooting techniques Work with purchasing on procurement of new and used electrical equipment Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services. Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

The Senior Project Engineer is responsible for ensuring administrative, contractual, financial and technical aspects of the assigned project(s) being executed. Senior Project Engineer will be reporting to the Project Manager and/or Superintendent. The Senior Project Engineer will supervise a team of skilled Project Engineer professionals who support departmental and organizational goals through their efforts. Job Responsibilities includes (but may not be limited to): Assists Project Manager and Superintendent in the management of construction projects, which involves cost control, expediting, quantity take-off, scheduling and safety. Develop peer constructability review of design documents. Develop, input and update project schedule as directed. Assist with the coordination, development and accuracy of the project estimate, budget, revisions, cost coding, and prepare cash flow charts. Analyze changes to contract documents, i.e. Owner Change Order Requests (CORs), Subcontractor Change Orders (SCOs). Review revised cost reports with Project Manager and assist in establishing final costs.Attend and participate in monthly job reviews. Work with Project Manager to perform a thorough and objective bid analysis using all applicable components. Prepare subcontractor Schedule of Values and monthly owner billings with Project Manager and Project Superintendent. Other duties upon request. Qualifications: 4+ years of experience as a Project Engineer in commercial construction industry. Bachelor's degree in Construction Management of Engineering or related field. Proficient computer skills in Microsoft Office Suite, Project Management software (Viewpoint or similar) and Scheduling software (Primavera or similar). Apply a complete and proficient understanding of construction management, engineering, safety, scheduling, estimating, budgets, costing and procurement. Analyzing and interpreting data. Effective verbal and written communication skills. Multi-tasking in a fast paced environment. Strong leadership, detail oriented, problem solving, initiative and teamwork. Proven ability to fulfill project development to project closeout responsibilities. Working Conditions: Duties required physical abilities such as repetitive hand/finger motions, arm extensions, sitting, standing, and walking jobsites that include uneven and changing site conditions. As well as climbing stairs and ladders, etc. The individual is required to occasionally move around the office and constantly operate a computer and other office machinery, etc. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Level 10 Construction is an Equal Opportunity Employer M/F/Disability/Veterans. All applicants applying must be authorized to work in the United States.

Corporate Electrical Engineer At The Intersect Group, we connect engineering professionals with organizations that are shaping the future of industrial manufacturing and infrastructure. Our client is a leading producer in the building materials industry, known for its commitment to operational excellence, safety, and innovation. With a diverse portfolio spanning cement, wallboard, and paper production, they offer a collaborative environment where engineers can lead impactful projects and drive technical advancement. Role Summary We are seeking a Corporate Electrical Engineer to lead the design, execution, and oversight of electrical engineering projects across multiple business units. Reporting directly to the VP of Engineering and Technology, this role is responsible for developing project scopes, managing contractors, and ensuring compliance with safety and performance standards. You will serve as a technical expert and project manager, supporting capital planning, commissioning, and operational improvements. The ideal candidate brings deep experience in heavy industrial environments, strong leadership capabilities, and a hands-on approach to electrical design and execution. Key Responsibilities Define project scope and objectives in collaboration with internal stakeholders. Develop specifications, drawings, cable schedules, loop sheets, and material take-offs. Manage contractors performing power studies and oversee OEM relationships. Lead contract negotiations and ensure timely execution, including FAT coordination. Execute electrical projects on time and within budget, managing third-party resources. Conduct FEED studies and contribute to cost estimates and design reviews. Design duct banks, grounding systems, electrical rooms, and cable tray layouts. Specify and procure electrical components including transformers, switchgear, VFDs, and motors. Lead inspections, arc flash studies, and commissioning activities. Mentor plant engineers and technical professionals across business units. Key Requirements Accredited bachelor's degree in Electrical Engineering. 5-10 years of experience in heavy industrial environments, preferably within engineering consulting and construction services. Strong project management skills with experience leading electrical scope-only projects. Expertise in electrical design including single line diagrams, loop sheets, and grounding systems. Familiarity with manufacturing processes for cement, wallboard, and paper. Ability to manage budgets, schedules, and reporting metrics (KPIs). Excellent communication and organizational skills. Willingness to travel 3-5 days per month to support project activities. Preferred Software Knowledge Microsoft Excel (Advanced), PowerPoint, Word EasyPower, ETAP, SKM Autodesk Revit & Navisworks Manage ElumTools Ready to Lead Industrial Innovation? If you're a seasoned electrical engineer ready to take ownership of high-impact projects and drive technical excellence across a national footprint, we encourage you to apply today. Submit your resume and contact information to The Intersect Group to be considered for this opportunity.

Altera .# **Job Details:**### ## **Job Description:****About the Role:**For decades, Altera has been at the forefront of programmable logic technology. Our commitment to innovation has empowered countless customers to create groundbreaking solutions that have transformed industries.Join us in our journey to becoming the world's #1 FPGA company!Altera is seeking a **Senior Design Automation Engineer** to join our Design Methodology Automation and Infrastructure Team.The Design Methodology Automation and Infrastructure Team is responsible for building and maintaining the core automation infrastructure that supports Altera's FPGA design flows-from RTL to GDSII. In this senior role, you will drive the architecture, development, and optimization of highly automated, reliable, and scalable flow systems that enhance design productivity and accelerate development cycles for next-generation FPGA products. You will influence technical direction, mentor junior engineers, and collaborate closely with cross-functional teams to deliver world-class automation solutions.**Key Responsibilities:*** Architect next-generation unified FPGA/SoC design methodologies spanning Front-End, handoff to Backend, Design Verification, Design-For-Test (DFT), Design Data Management/Release flows, and FPGA-specific flows such as Design Intent and Configuration Management.* Develop and integrate state-of-the-art EDA solutions, including ML/AI-enhanced tools, flows, and methodologies-sourced externally or developed internally-to create sustainable, scalable automation solutions for multiple chip design programs.* Collaborate with design automation technical leads, design domain leads, and domain managers to define and drive new design automation architectures from concept through full production deployment across upcoming product programs.* Partner with EDA vendors to evaluate, explore, and extend tool capabilities that improve design quality, shorten turn-around time, and enhance design optimization.* Architect, develop, deploy, and maintain advanced design automation flows and methodologies for digital and/or analog design at scale.* Lead evaluation, integration, and enhancement of EDA tools, driving improvements in design productivity, efficiency, and quality across multiple design teams.* Design and implement robust automation frameworks that reduce manual effort, increase reproducibility, and improve overall design throughput.* Identify workflow bottlenecks across design, verification, CAD, and methodology teams and lead cross-functional initiatives to streamline FPGA design execution.* Provide deep technical expertise in scripting, tool customization, and flow development for advanced semiconductor design needs.* Drive continuous innovation in design automation infrastructure through adoption of new methodologies, technologies, and optimizations.* Collaborate with internal and external EDA vendors, owning issue resolution, feature requests, and deployment of next-generation capabilities.* Mentor and provide technical leadership to junior engineers within the Design Automation organization.#LI-MD1**Salary Range**The pay range below is for Bay Area California only. Actual salary may vary based on a number of factors including job location, job-related knowledge, skills, experiences, trainings, etc. We also offer incentive opportunities that reward employees based on individual and company performance.$142,600 - $206,500 USDWe use artificial intelligence to screen, assess, or select applicants for the position.### ## **Qualifications:****Minimum Qualifications:**Bachelor's or Master's in Computer Science, Electrical Engineering, or equivalent, with a minimum of 10 years of experience in IC Design or Design Automation and experience in the following:* Extensive experience with industry-standard EDA tools and hands-on expertise in design methodologies across multiple domains, such as Front-End Logic Design flows, Design Intent and FPGA-specific flows, Design Verification flows, and Design-for-Test (DFT) flows (with Back-End flow knowledge considered a plus).* Strong programming skills in Python, Tcl, C-shell, C, C++, or similar languages.* Familiarity with ML/AI applications and algorithms and their use in EDA or design methodology optimizations.* Proven leadership skills for driving collaborative, cross-functional projects, with strong communication and influencing abilities### ## **Job Type:**Regular### ## **Shift:**Shift 1 (United States of America)### ## **Primary Location:**San Jose, California, United States### ## **Additional Locations:**### ## **Posting Statement:**All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance. #J-18808-Ljbffr

A leading technology company in San Jose, California is seeking a Physical Design Engineer to play a critical role in backend implementation for FPGA/SoC devices. You will be responsible for tasks such as floorplanning, PPA optimization, and collaboration with diverse teams. The ideal candidate will have a Bachelor's degree in Electrical Engineering and over 6 years of hands-on experience. Join us to help develop innovative technology solutions. #J-18808-Ljbffr

ReqID: HOU0000DX **Joining Arup** o Arup's purpose, shared values, and collaborative approach has set us apart for over 75 years, guiding how we shape a better world. We are seeking a **Protection & Control Settings Engineer** with technical experience in the application of protection settings for HV substations for power utilities and for the interconnection of renewables and data centers. In this role you will support the delivery of substation projects for electric utilities, contractors and developers. This position can be worked out of our **Houston, Dallas, Los Angeles, San Francisco** or **Austin** offices. **The opportunity:** + Perform system protection setting calculation, development of relay logic diagrams, and protection coordination on various substation projects up to 500kV voltage level. + Develop design basis documentation for protective settings, relay settings calculations and generate native relay configuration files using SEL AcSELerator, GE EnerVista and/or similar vendor software. + Apply industry standards for the protection of system equipment, including power buses, power transformers, HV/MV circuit breakers, capacitor banks, reactors, transmission lines, and distribution feeders. + Perform power system modeling and protective relay coordination analysis using ASPEN OneLiner or Siemens CAPE, ETAP, SKM, and/or CYME software. + Prepare design calculations, including short circuit calculation, current transformer performance and ratio selection, over-current element coordination, zone-distance element selection and coordination, and relay loadability calculation. + Provide engineering support with construction and commissioning activities for substations. At Arup, you belong to an extraordinary collective - in which we encourage individuality to thrive. Our strength comes from how we respect, share and connect our diverse experiences, perspectives and ideas. You will have the opportunity to do socially useful work that has meaning - to Arup, to your career, to our members and to the clients and communities we serve. **The skills:** + Bachelor's degree in Electrical Engineering from an accredited university. + Licensed Professional Engineer (PE) is preferred. + Proven 4+ years experience in development of protection relay setting for transmission substations. + Knowledge of FERC and NERC requirements as they pertain to electric utility reliability requirements. · Experience in power systems modeling and protective relay coordination analysis using ASPEN OneLiner or Siemens CAPE, ETAP, SKM, CYME software. Ability to perform Arc Flash and other power system studies is preferred. + Ability to read and interpret protection single lines, three lines, schematics, functional diagrams, etc. + Experience with IEC61850 and its implementation is preferred. + Ability to work both independently and collaboratively, as needed, to achieve agreed goals and results. + Excellent communication skills - able to interact with clients, regulatory bodies, vendors, and internal stakeholders. Ability to represent the company credibly. + The ability to prioritize work effectively, manage deadlines and organization skills required for our rapidly changing environment. Please note that all applicants must apply directly via the job portal. If this role is not quite what you are looking for but you are interested in other opportunities for a future with purpose, please sign up to join our where you will be kept up to date with roles suitable for you to shape a better world. **What we offer you** At Arup, we care about each member's success, so we can grow together. Guided by our values, we provide an attractive total reward package that recognizes the contribution of each of our members to our shared success. As well as competitive, fair and equitable pay, we offer a career in which all of our members can belong, grow and thrive - through benefits that support health and wellbeing, a wide range of learning opportunities and many possibilities to have an impact through the work they do. We are owned in trust on behalf of our members, giving us the freedom, with personal responsibility, to set our own direction and choose work that aligns with our purpose and adds to Arup's legacy. Our members collaborate on ambitious projects to deliver remarkable outcomes for our clients and communities. Profit Share is a key part of our reward, enabling members to share in the results of our collective efforts. **Benefits at Work** - At Arup, we have a comprehensive and valuable benefits program that works for our employees and their families while keeping costs low. These benefits provide health and welfare security for you as well as paid time off for rest and renewal. As a member of Arup, everyone shares in our success through a global profit share scheme (payments are dependent on the firm's financial performance). Our Global Profit Share Plan (paid bi-annually) provides an opportunity for you to share in the success of the Firm. As a valued employee of Arup, you can also choose to participate in our 401(k) plan with up to 10% company match to help you save for your future **Flexible Working** - We believe that flexible arrangements create a more inclusive way of working that supports our diversity and the wellbeing of our people. Options for alternative schedules and the ability to work outside of the office for a portion of your workweek are available **Hiring** **Range** - The good faith base salary hiring range for this job if performed in Houston is $94,500 to $127,300 per year. This range is commensurate with experience, educational background, and skill level. Benefits are not included in the base salary. Please note hiring ranges for candidates performing work outside of Houston will differ. **Different People, Shared Values** Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We welcome applications from individuals of all backgrounds, regardless of age (within legal limits), gender identity or expression, marital status, disability, neurotype or mental health, race or ethnicity, faith or belief, sexual orientation, socioeconomic background, and whether you're pregnant or on family leave. We are an open environment that embraces diverse experiences, perspectives, and ideas - this drives our excellence. Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Our internal employee networks support our inclusive culture: from race, ethnicity and cross-cultural working to gender equity and LGBTQ+ and disability inclusion - we aim to create a space for you to express yourself and make a positive difference. Discover more about life at Arup at. **Our Application Process** We will be reviewing our candidates for this position on a rolling basis. Once you have applied you will be evaluated and potentially moved on to the next round, at which point a member of the talent resourcing team will reach out to you directly. **Arup is an equal opportunity employer.** All qualified applicants will receive consideration without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, spouse of a protected veteran, or disability. **Stay safe online.** Recruitment fraud is on the rise, and Arup's name, logo, and branding have been used in fraudulent job advertisements. Arup will never ask for bank information as part of our recruitment process. \#LI - HA1REF:EN EOE-Protected Veterans/Disability

Cannon Corp Description: You'll Come for a Job But You'll Stay for an Exciting Career! Engineering and Designing Reliable, Responsive, Solutions. SINCE 1976, CANNON has provided creative solutions to clients in the energy industry, water resources, public infrastructure, and commercial and residential development. We work hard. We play hard. We have fun. JOIN CANNON as a CIVIL SENIOR PRINCIPAL ENGINEER in WEST LOS ANGELES. West Los Angeles is known for its many popular recreational opportunities, and our office is conveniently located adjacent to the Expo MetroLink Commuter line. CIVIL SENIOR PRINCIPAL ENGINEER JOB SUMMARY Provides daily supervision, coordination, technical support, and training to engineers and designers. Responsible for project management, budgeting oversight, mentoring, leading, and managing talented staff, preparing engineering reports and analyses, design and preparation of plans, specifications, and cost estimates for a variety of clients and great projects (residential / commercial and mixed use development) for land development projects in the Inland Empire. This position offers a clear path to leadership within the Development Business Unit, with a trajectory toward a Regional Manager role. The ideal candidate will gain hands-on experience in high-impact projects, preparing them for greater responsibilities and strategic decision-making. As a key player in the team, this role provides opportunities to develop leadership skills, drive business growth, and contribute to the long-term success of the organization. Candidates who excel in this position will be well-positioned for future advancement into a senior leadership role. CIVIL SENIOR PRINCIPAL ENGINEER JOB DUTIES Concurrently manages a variety of civil engineering land development projects. Establishes and fosters client relations and develops proposals and budgets. Participates in professional and/or technical organizations. Uses technical knowledge to design plans for grading, drainage, water quality (SUSMPs, LIDs, WQMPs and /or SWPPPs), utility, street, off-site improvements, sanitary sewers, and water lines and provide construction assistance / support services. Analyzes and recommends solutions to complex drainage problems. Communicates effectively with various departments, clients, and agencies. Mentors, directs, manages, and supervises the design associates on technical matters and procedures and acts as a technical and management resource to staff. Effectively manages quality assurance and quality control. Ensures projects are delivered on schedule and within scope and budget. Manages and coordinates with various jurisdictional agencies to obtain approvals of improvement plans. Is actively involved in business development and expanding opportunities in the Inland Empire area. Requirements: Requires a Bachelor's degree in Civil engineering from an accredited college. Requires 15+ years' experience in civil engineering specifically pertaining to land development projects. 5+ years demonstrated experience supervising and successfully managing projects within the constraints of scope, schedule, budget, and performance requirements, providing technical oversight for projects and all related project phases and tasks, to include quality assurance reviews. Participates in Land Development organizations like BIA, HBA, etc. is a plus. Proven ability to lead teams to success, including past experience directly reviewing and managing employee performance, and mentoring a team of three or more direct reports. Requires a California P.E. license. Proven expertise in land development design. Proven experience in processing improvement plans with jurisdictional agencies in the Inland Empire. Highly proficient with code principles and able to convey them to others. Experience with business development and client management. Experience in hydrologic / hydraulic analyses a plus. Working knowledge of computer software programs used for civil engineering design (AutoCAD, Civil3D, AES, WSPG, Flowmaster, etc.). Experience in business development (obtaining new and repeat business). WE OFFER competitive salaries, excellent benefits package, a hybrid work schedule, and an active and positive team building, work environment. Cannon is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, age. Compensation details: 00 Yearly Salary PI0eefe5-

Senior Project Engineer | Allied Resources Technical Consultants Allied Resources is seeking a Senior Project Engineer to support a major public-works construction project in the Philadelphia area. The position offers a competitive compensation and benefits package including medical, dental, vision, 401k with company match, paid time off, disability coverage, parental leave, volunteer days, and more. Job Responsibilities: Support day-to-day project coordination on a large public-works or commercial construction project, working closely with project managers, superintendents, subcontractors, and design teams. Assist with developing and maintaining project schedules, tracking progress, and preparing updates for project leadership. Manage and organize project documentation including submittals, RFIs, change orders, meeting minutes, and daily reports. Perform quantity takeoffs, track material usage, and support cost control and forecasting efforts. Review drawings, specifications, and contract documents to identify issues, inconsistencies, or potential conflicts. Support procurement activities including scope reviews, vendor coordination, material tracking, and delivery schedules. Provide technical assistance to field teams, helping troubleshoot constructability concerns and support quality control efforts. Participate in site walks, coordination meetings, and inspections; assist with punch lists, project closeout, and turnover documentation. Collaborate with internal and external stakeholders to keep communication clear, accurate, and organized throughout all phases of the project. Contribute to the implementation of safety, quality, and operational best practices across the project. Qualifications: Bachelor's degree in Construction Management, Civil Engineering, Mechanical Engineering, Architecture, or a related field preferred; equivalent experience welcomed. 2+ years of experience working as a Project Engineer, Senior Project Engineer, or similar construction engineering role. Experience supporting commercial, institutional, industrial, or public-works construction projects. Ability to read and understand construction drawings, technical specifications, and contract documents. Strong organizational and communication skills with the ability to manage multiple tasks in a fast-paced environment. Familiarity with construction or project management software (such as Procore, Bluebeam, P6, or equivalent). Strong problem-solving abilities and attention to detail. Valid driver's license and reliable transportation required. EEO Policy: Allied Resources complies with all Equal Employment Opportunity (EEO) affirmative action laws and regulations. Allied Resources does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender identity and expression, disability, veteran status, or any other status protected by law.

Are you ready to embark on an extraordinary career journey? Look no further than The Austin Company, where greatness is not just a goal, but a way of life. As a leading design, engineering, and construction firm with a rich legacy dating back to 1878, Austin offers unparalleled opportunities for growth, innovation, and professional development. Join our dynamic team and be part of a company that is at the forefront of shaping the future of industries worldwide. With a commitment to excellence, a collaborative work environment, and a passion for delivering exceptional results, Austin empowers its employees to reach their full potential and make a lasting impact. Discover the limitless possibilities that await you at ***************** and embark on a rewarding career journey with Austin. Summary/Objective The Austin Company performs design-build work for industrial and specialized commercial markets. The Electrical Intern actively works with in-house engineers, architects, and construction departments to assist with ongoing functions. Additionally, each intern participates in an interactive intern-specific project requiring coordination amongst the various engineering and architectural design disciplines. Throughout the summer, the interns choose a project, decide a site location, and bring their project idea to life with engineering design and collaboration efforts. Finally, a proposal and presentation are assembled, in which the interns pitch their design proposal to the architectural, engineering, construction and marketing professionals in the office. By the end of the summer internship, students gain an understanding for the project cycle. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions Utilization of Revit, Revizto, Visual Lighting, Bluebeam and Procore to aid in project support. Assists in electrical equipment and device selection and layout, life safety equipment selection and layout, and develops equipment schedules. Performs calculations for specific tasks defined by a discipline mentor. Provides Revit design drawings of sketches prepared by other team members. Participates in departmental and design review meetings. With the assistance of discipline mentor, reads and understands drawings and specifications. For the Intern Project, The Electrical Intern duties are: Coordinates with other construction, architectural and engineering disciplines. Selects appropriate power distribution equipment for the project. Selects appropriate lighting for the project. Provides load, voltage drop, conduit fill and photometric calculations; design and layout for power distribution equipment and lighting. Creates Revit drawings, including one-line diagram, area plans, equipment details. Circuits equipment in Revit to create panel schedules. Conducts quantity take-offs and compiles an estimate of all related electrical components in the project. Aids with the project proposal and presents final design to architectural, engineering, construction and marketing professionals in the office. Required Education and Experience Actively enrolled in a 4 or 5-year degree program in Engineering. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. The pay for this position in California is $25.00 per hour. The Austin Company is an EEO and DFWP Employer Austin is wholly owned subsidiary of Kajima.

NOVA Engineering is hiring Staff Engineers to work on Construction Materials Testing & Special Inspection projects throughout the Pensacola, FL region. This opportunity will allow you to work on some of the most prestigious projects in the southeastern U.S. with much room for career advancement. Primary responsibilities will include: Staff/project engineering duties including data reduction, analysis & fieldwork for commercial, industrial, retail, government, office and residential projects (both Geotechnical Engineering and Construction Materials Testing/Inspection) Assisting with project management & reporting Field inspection, sampling & testing of soils/foundations, concrete, masonry, reinforcing steel, etc. Report preparation Client consultation and maintenance Qualifications: B.S. degree in Civil Engineering is required E.I.T. is required Recent Graduates Encouraged to Apply 0 - 2 years relative experience Strong communication skills Position entails approximately 80% fieldwork and 20% office with occasional travel Check out our Perks: In addition to our welcoming company culture and competitive compensation packages, our employees enjoy the below benefits: Use of take-home Company Vehicle and gas card for daily travel to work sites Comprehensive group medical insurance, including health, dental and vision Opportunity for professional growth and advancement Certification reimbursement Paid time off Company-observed paid holidays Company paid life insurance for employee, spouse and children Company paid short term disability coverage Other supplemental benefit offerings including long-term disability, critical illness, accident and identity theft protection 401K retirement with company matching of 50% on the first 6% of employee contributions Wellness program with incentives Employee Assistance Program NOVA is an Equal Opportunity Employer. All qualified candidates are encouraged to apply. NOVA does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, disability, national origin, ancestry, marital status, veteran status or any other characteristic protected by law.

Senior MEP Engineer License Required: Active Professional Engineer (PE) We are seeking a Senior MEP Engineer (PE) with 10+ years of experience to lead HVAC retrofit and design-build projects in existing buildings. This is a hands-on technical role for an engineer who wants full project involvement-from assessment through implementation-without moving in Key Qualifications 10+ years of MEP engineering experience (design-build preferred) Strong HVAC/mechanical background; electrical coordination experience a plus Active PE license Experience with retrofit projects and existing buildings Comfortable with both office design work and site visits AutoCAD LT experience (2D drafting; no BIM required) Experience with K-12, municipal, or institutional facilities preferred Technical Skills HVAC load calculations, system sizing, and code-compliant design Energy modeling experience (Carrier HAP preferred; Trane Trace, eQUEST a plus) Ability to produce construction drawings and specifications RFI and submittal review; construction support Working knowledge of ASHRAE, IMC, IECC, and NEC Familiarity with BAS/controls systems in retrofit environments preferred Responsibilities Perform facility assessments and site walk-throughs Design HVAC retrofit and replacement solutions Develop scopes of work, pricing support, and bid packages Coordinate with contractors, vendors, internal teams, and clients Support projects through construction with RFIs and site reviews Manage multiple projects while maintaining quality and deadlines Work Environment 25% field / 75% office or remote Focus on existing buildings (often with limited or no drawings) Collaborative, low-bureaucracy culture Emphasis on practical, maintainable, real-world solutions Why Join Stay deeply technical-no management track required End-to-end project ownership High-impact retrofit work with strong work-life balance