Stagecoach Cartage and Distribution jobs in Stockton, CA - 31855 jobs

We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. This role will require the ability to derive complete RF system budgets, assess and manage key performance parameters such as phase noise, CPCR (Clutter Power to Carrier Ratio), CA (Coherent Ambiguity), and more, while collaborating across engineering disciplines to ensure system performance exceeds mission requirements. Key Responsibilities: Define and develop RF system architectures for radar and advanced sensing applications. Derive and maintain RF link/system budgets including gain, noise figure, dynamic range, and spurious performance. Model and predict phase noise, CPCR, CA, spurious suppression, and related RF performance metrics. Conduct trade studies and system optimization to balance performance, cost, and schedule. Guide the integration of Tx/Rx modules, LO generation/distribution, filters, and beamforming subsystems into complete radar systems. Work closely with hardware, firmware, DSP, and mechanical teams to ensure full system-level alignment. Perform root cause analysis of system performance issues and recommend design changes. Generate and maintain high-quality documentation for requirements, budgets, analysis reports, and verification plans. Provide technical mentorship to junior and mid-level RF engineers. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field (Master's or PhD preferred). 10+ years of experience in RF system design and analysis, preferably for radar or high-performance comms. Deep understanding of RF/microwave theory including gain, noise, non-linear effects, spurious content, and spectral purity. Demonstrated experience deriving and validating system-level RF budgets. Proficiency in simulation tools such as Keysight ADS, MATLAB, HFSS, CST, or similar. Experience with phase noise analysis, CPCR, CA, dynamic range, and link margin calculations. Familiarity with radar system concepts including waveforms, pulse compression, and Doppler processing. Strong skills with RF measurement equipment (VNAs, spectrum analyzers, phase noise analyzers, power meters). US Citizenship with the ability to obtain and maintain a security clearance. Preferred Skills: Experience in phased-array architectures and beamforming. Knowledge of military/aerospace standards and environmental testing. Strong communication skills for customer and internal design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Paramedic (Full Time/Part Time) Palm Springs, CA 15,000 Sign On Bonus 10,000 Sign on Bonus & 5,000 Relocation bonus Hired on as FT Palm Springs Paramedic (relocating more than 100 miles) OR can choose - 15,000 Sign on Bonus hired on as FT Palm Springs Paramedic (relocating more than 100 miles) Please contact Human Resources for Bonus agreement details. Two (2) year commitment agreement with the Company may apply. Eligibility for those employees who are rehired will depend on break in service time from the company. POSITION SUMMARY: The mission and purpose this position is to compassionately deliver high-quality service and basic, as well as advanced patient care in a professional, caring and cost-effective manner. Paramedic Essential Duties and Responsibilities: Assess each call situation to determine best course of action and appropriate protocol. Utilize medical equipment and procedures including defibrillator, EKG monitor, oxygen and suction devices, intravenous fluids, CPR and other procedures and medications as required to provide advanced medical care. Develop and utilize triage skills to provide optimal efficiency during calls. Paramedic will provide patient care according to clinical protocols and safety requirements. Lift and move patients as required to provide optimum care. Communicate with receiving facility to receive medical direction and to provide critical information. Other duties as defined by the formal Paramedic Minimum Qualifications: Education/Licensing/Certification: High school diploma or equivalent (GED) CA Drivers' License Ambulance Driver's License (from DMV) Medical Examiner's Card or DL51 (from DMV) State of California Paramedic License CPR Card (American Heart Association ONLY, Health Care Provider. Hand written cards are not acceptable) ACLS Card (American Heart Association ONLY, hand written cards are not acceptable) PALS (American Heart Association ONLY, hand written cards are not acceptable) OR PEPP (only required for Riverside, LA & Ventura Co. applicants) PHTLS or ITLS Preferred at time of hire (Must be acquired within the first 6-months of employment for Riverside County) Driving record in compliance with AMR Safety and Driving policy ( proof required if conditional offer of employment is made ) ICS courses, please refer to link ************************************* IS-100B (ICS 100) IS-200B (ICS 200) IS-700A (NIMS) IS-800B (NIMS) Experience: Some past work experience, preferably in healthcare desired. Click Here For Full Job Description Why Choose AMR? AMR is one of Global Medical Response's (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at ************************* Learn how our values are at the core of our services and vital to how we approach care, and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. EEO Statement: Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. More Information about this Job: Company Benefits: Check out our careers site benefits page to learn more about our comprehensive benefit options, which include medical, vision, dental, 401k, disability, FSA, HSA, EAP, vacation and paid time off. Bonus statement: This position is bonus eligible Salary Range: $25.75 - $57.50 DOE (This rate applies to 12-hour shift and average 42 per week)

Imagine a career that truly takes you places, where you get to travel and meet new people every day along the journey. For 100 years, our Greyhound Drivers have been the heart and soul of our company, serving the transportation needs of communities across the nation. Do you enjoy meeting new people and have a passion for safety and the customer experience? Interested in a job that pays you to travel? Come join us in serving America's passengers as we continue our legacy of putting the wheels in motion. Responsibilities: Operate a bus in a safe and efficient manner, adhering to traffic laws and safety regulations Follow designated routes and schedules, making necessary adjustments when required Ensure the safety and comfort of passengers by providing assistance when needed and maintaining a clean bus Perform pre-trip and post-trip inspections to ensure the bus is in good working condition Maintain a clean and orderly bus, including regular cleaning of the interior and exterior Report any maintenance issues, accidents, or incidents to the appropriate authorities Assist passengers with boarding, exiting, and securing their personal belongings Follow emergency procedures and respond to incidents in accordance with company protocols Keep records of miles driven, fuel usage, and other required documentation Stay updated on company policies and safety procedures Qualifications: Fully Licensed with Class A or B Commercial Driver's License (CDL) Possesses Passenger 16+ endorsement and no air brake restriction 22 years of age or older Able to pass a DOT physical and pre-employment drug screen Full-time employment consideration only Ability to work varied schedule based on regional driver needs Benefits Medical, Dental, and Vision Plans 401K with company-matched contributions Life Insurance Paid Vacation, Holidays, and Sick Days Free Travel Passes Annual Uniform Allowance Driver Union membership & representation Career Advancement Opportunities Compensation Range: USD $29.40 - USD $31.28 /Hr.

If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is seeking a Fleet Maintenance Manager who will be a dynamic, multi-task-oriented senior professional to manage all day-to-day maintenance aspects of this fixed route and paratransit bus operation. The Fleet Maintenance Manager will ensure that all contractual requirements are achieved, and duties included will consist of daily, weekly, monthly and annual reports. The Fleet Maintenance Manager must be able to properly manage a budget for the maintenance program. Qualifications: Talent Requirements: The Maintenance Manager shall have a minimum of five (5) years of experience in managing the maintenance of a heavy-duty bus or truck fleet; two (2) years of experience in maintaining and/or managing the maintenance of vehicles in a fixed route and paratransit fleet. Must possess in-depth knowledge of mechanical maintenance and repair methods and practices, strong knowledge of diesel, CNG and electric vehicle systems, and proficiency with maintenance management software. The qualified candidate will have operational and working knowledge of compressed natural gas fueling systems and demonstrated experience through training and work experience maintenance of major components and vehicle systems (e.g., transmissions, HVAC systems, air systems,11 compressed natural gas (CNG) engines, gasoline engines, CNG fuel tank inspection procedures, and maintenance of electric transit coaches, etc.). The Maintenance Manager shall have experience in supervising the work of other maintenance personnel, ranging from mechanics, parts clerks, fueler/washers, etc.. Previous passenger transportation in the current project or a similar environment preferred. Must be able to manage and interface with the client. Must have the ability to track and control parts inventories, vendors and suppliers. Must be able to properly prioritize, implement and manage work schedules, projects, and assignments. Must be able to manage the financial/accounting aspects of a fleet maintenance operation. Must be able to communicate effectively with all levels of staff in written and oral formats. Must have computer skills, including word processing, spreadsheets and Microsoft outlook. ASE or manufacturer's certifications a plus. Solid knowledge of managing audits, PM schedules. Manager shall be the equivalent of a journeyman mechanic; have an Associate degree or equivalent from a college or accredited technical school. Must display initiative, professionalism, candor and tact at all times. Starting salary range: $120,000 - $140,000 MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Master Electrician Shift: 3rd (11pm-7am) Pay: $44- $50.22/hr Position Summary: Primary duties include providing safe and timely electrical support, preventative maintenance, installation, service, repair, troubleshooting and resolution of multiple operating machines within a manufacturing industrial environment. The ideal candidate will have mechanical and electrical experience, a familiarity with hydraulics and pneumatics and have basic troubleshooting experience with proven ability of machine repair. How you will impact WestRock: Utilize electrical/mechanical skills to maintain machinery Contribute to a collaborative safety culture that drives results Provide rapid response to ensure seamless productivity. What you need to succeed: 2-3 years in trouble shooting industrial electrical control systems down to component level An operational knowledge of automated industrial machinery which includes; motors, servos, pumps, drives, relays, 3 phase-power, communication devices, industrial / electronic controls, and power transmission systems. A good understanding of hydraulic and pneumatic systems. Able to install and set up both A/C and D/C drives PLC trouble shooting and problem-solving ability with practical, mechanical & electrical aptitude. Must be able to read and interpret both electrical and mechanical drawings. Working knowledge of power transmission equipment and bearings. Basic welding skills preferred but not required. Familiar with pumps, both air and electric. Able to install and trouble shoot basic 3 phase motor control circuits Some knowledge of the various types of sensors and limit switches Familiar with computers and Microsoft software. Strong written and verbal communication skills. Ability to work independently in a mature and professional manner. Ability to work flexible hours, overtime High school diploma or equivalent Military training and or Technical School preferred What we offer: Comprehensive benefits package- including but not limited to medical, dental, vision, 401K, and short-term disability coverage. Corporate culture based on integrity, respect, accountability, and excellence Comprehensive training with numerous learning and development opportunities A career with a global packaging company where Safety, Sustainability, and Inclusion are business drivers and foundational elements of the daily work. The starting range is $44/hr - $50.22h r, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 5 days of paid vacation will be granted after 1 year of service, and 11 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at ******************************** and the application window is expected to close by 1/19/26. #WorkWithSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. The opportunity: • Support the operation of a fast-paced packaging manufacturing facility. Must be able to conduct, maintain, test and repair electrical/electronic, mechanical, hydraulic, and pneumatic systems and components. Must be able to apply knowledge of electrical/mechanical principles in determining equipment malfunctions and restore in all areas of Manufacturing. • Primary duties include the install, start up and shut down of equipment in accordance with company safety procedures for machine activation and shutdown in line with OSHA requirements; inform appropriate management and line mechanics of potential electrical/mechanical problems and inherent dangers involved and maintain company-required performance and maintenance records for identified equipment. The job also includes performing preventative maintenance functions as directed, assist maintenance personnel with technical troubleshooting and to perform other duties as required. • The ideal candidate will have a strong commitment to working safely and demonstrate the ability to work in a fast-paced environment, possess a strong desire to learn the maintenance of complex machinery, and have a desire to advance within the company. This is a 2nd Shift position - 3p - 11p How you will impact WestRock: • Ensure internal and external customers get the quality, consistency, and responsiveness they deserve • Embrace the WestRock culture, based on values of integrity, respect, accountability, and excellence What you need to succeed: • Ability to maintain various manufacturing equipment, follow specific directions, and perform other duties as assigned • Ability to work safely, maintain a clean and safe work environment, and comply with all safety regulations • A thorough knowledge of electrical components and equipment including the use of special instruments for diagnostic purposes • Computer experience/operation and PLC programming • Flexibility to work any shift and overtime as required • High school diploma or equivalent required; Electrical background, Military training and/or technical school preferred • Offer contingent on passing background check, pre-employment physical and drug screen What we offer: • Corporate culture based on integrity, respect, accountability and excellence • Comprehensive training with numerous learning and development opportunities • An attractive salary reflecting skills, competencies and potential; the range for this position is $28.53 - $40.22 an hour with an attractive benefits package plus $0.50 shift differential for 2nd shift • A career with a global packaging company where Sustainability, Safety and Inclusion are business drivers and foundational elements of the daily work #NY #militaryjobs The starting range is $28.53-$40.22/hr, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 5 days of paid vacation will be granted after 60 working days , and 10 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at ******************************** and the application window is expected to close by 1/19/26. #WorkWithSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Industrial Controls Technician The Opportunity: As an industrial controls technician for our corrugated packaging plant, you will work to keep our equipment up and running to OEM standards. You will use your expertise and experience to work with maintenance leadership, our operators, vendors & corporate reliability team to ensure maximum uptime and help us safely meet our production goals. Devens is a non-union facility. How you will help us: Follow all safety rules and practices Provide electrical and automation controls troubleshooting, support and predictive, preventive and emergency maintenance for our fast-paced corrugated packaging facility Review key plant metrics/KPIs and equipment data to identify potential areas for continuous improvement and lead a team to implement solutions As priorities demand, performing emergency breakdown maintenance as necessary to support plant operations including preventive maintenance activities such as lubricating, measuring wear, measuring positions, repositioning components; and observing operations, vibrations, and noise levels. What you will need to succeed: A strong understanding of PLC, VFD and HMI/OIT software, previous and current versions. A successful candidate will have demonstrated ability to troubleshoot and repair electrical controls systems, mechanical drives, pneumatics, hydraulics, PC's, Robotics, and Controls networks. The ability to reference equipment manuals & similar literature. Strong understanding and application of precision maintenance Willingness to Maintain clean and organized work areas and cleaning up work areas as part of completing assigned tasks. May operate forklifts, hoists, and other heavy equipment Master level ability to reference equipment manuals & literature Strong CMMS Knowledge Strong Computer Skills Strong understanding of 5S Provide leadership and, or training to one or two other automation technicians. Willingness to complete any maintenance work if workload permits Education and Work Experience: EE Degree, or equivalent in work experience and/or training Three or more years' experience working with large industrial equipment troubleshooting automation/robotics or related field. Microsoft Office and JDE or similar Strong overall electrical knowledge and experience with electrical and industrial control systems. Excellent communication skills and effective team-building skills a must. Mentorship and willingness to help train your teammates is valued. Experience in corrugated packaging or similar high volume, no redundancy manufacturing environment The starting rate is $40-$45 per hour, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 10 days of paid vacation, and 11 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at ******************************** and the application window is expected to close by 1/15/26 . #WorkWithSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits?! Would you like to work with a company that invests in your growth? Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are: As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary. What's in it for YOU: Competitive Pay Rates! 40 hours a week, not flat rate OT as needed over 40 hours Full Benefits: Medical, Vision, Dental, and 401K plan Paid vacation Company provided uniform Corporate partner discount program Career advancement through a national company Duties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components. Perform scheduled preventative maintenance of vehicles Execute major and minor repairs of defective components. Document all activities in MV's Fleet Management System. Maintain work environment in an organized and safe condition. Qualifications: Talent Requirements: High school diploma or equivalent. Combination of at least two (2) to three (3) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program. Must be able to pass a pre-employment drug screen and random drug testing. MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. The Opportunity: Smurfit Westrock Solvay Mill is seeking Team Support Technician (Entry Level Operations Position) at Solvay NY. This position is entry level, and the right candidate will be taught skills needed to be successful. The goal of this role is to grow with the organization and become a technical expert in paper making. Pay Range: $23.02/hour and after probationary period $26.49/hour How you will impact Smurfit Westrock: Knows and follows all safety, warehouse, and ISO policies/procedures Inspects trailers for damage - inside/outside, prior to loading finished rolls of paper Places jack stands and chocks in appropriate positions on parked trailers Sweeps out railcars and trailers thoroughly Makes sure packing material (dunnage) is available to keep rolls of paper in position while traveling Makes sure finished paper rolls have correct placement and tightness of shipping bands to secure roll for traveling Reviews customs and shipping paperwork Outbound scaling / controlling dock activity (live loads, drop loads) Communicates with spotters at beginning of each shift on what trailers are needed Back-up scale admin for each shift Corrects hold tags and reassigns rolls Assists with physical inventory Secures railcar and trailer loads Enters drop loads into CMS Helps with the paper machines during unplanned downtime Starch unloading Utilizes various computer programs Conducts proper shift relief What you need to succeed: High school diploma or equivalent and previous work experience. Ability to successfully train and advance in the pay-for-skills environment. Safety and quality-conscious work habits. Above average written and verbal communication skills. Effective interpersonal and team skills. Must be computer literate with good understanding of Microsoft products and email. Ability to climb stairs, lift 40 pounds unaided, read, respond to Mill signs & information systems, hear/respond to Mill paging systems, alarm, and warning systems Tolerance for heat/humidity (summer months) & cold (winter months) environments What we offer: Corporate culture based on Integrity, Respect, Accountability and Excellence Comprehensive training with numerous learning and development opportunities An attractive salary reflecting skills, competencies and potential A career with a global packaging company where Sustainability, Safety and Inclusion are business drivers and foundational elements of the daily work The starting rate is $23.02 per hour, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 10 days of paid vacation, and 11 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at ******************************** and the application window is expected to close by 11/03/25. #CareersAtSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Springfield MA - Industrial Electrician The Opportunity: We are searching for a skilled Industrial Electrician to maintain, troubleshoot, and repair electrical and mechanical industrial equipment in our corrugated packaging plant in Springfield, MA. The successful candidate will be qualified to troubleshoot and repair both electrical and mechanical components on large scale production machinery, participate in PMs, support continuous improvement initiatives, and adhere to all safety regulations. You will provide resolutions to mechanical and electrical problems on a wide variety of paper and packaging machinery to keep our plant running at peak performance. What We Offer: A career with a Fortune 500 company where Sustainability, Safety and Inclusion are business drivers and foundational elements of your daily work. Opportunities to advance and learn alongside accomplished leaders in the Corrugated Packaging industry. If you live for machine up time, come join our best-in-class maintenance team! Opportunities to advance and learn alongside accomplished leaders in the Corrugated Packaging industry. An attractive rate of pay and top-tier benefits, reflecting skills, competencies and potential. The rate for this role is up to $40 an hour. You will work in a collaborative work environment where safety is our priority. How You Will Impact Smurfit Westrock: Focus on maintaining equipment in working order through preventive maintenance and troubleshooting mechanical and electrical failures in a fast-paced environment. Enforce plant safety regulations and encourage employees to become safety conscious. Perform scheduled preventive maintenance on electrical equipment, including motors, motor control centers (MCCs), transformers, switches, and wiring. Diagnose, troubleshoot, and repair electrical faults in complex machinery such as corrugators, printing presses, die cutters, and material handling systems. Troubleshoot and maintain Programmable Logic Controllers (PLCs) (e.g., Allen-Bradley, Siemens) and Human-Machine Interfaces (HMIs). Install, maintain, and calibrate various sensors, transducers, and measuring instruments. Ensure all electrical installations and repairs comply with the National Electrical Code (NEC), local codes, and company standards. Strictly adhere to Lockout/Tagout (LOTO) procedures and other plant safety policies. Maintain and repair high-voltage equipment and control systems. Keep accurate records of all maintenance work performed, parts used, and system documentation. Assist with the installation and commissioning of new production equipment and control systems. Collaborate with mechanical, hydraulic, and pneumatic technicians to resolve complex operational issues. Participate in root cause analysis of failures to implement corrective actions and improve machine reliability. Provide support for mechanical maintenance tasks as needed to ensure production uptime including predictive and preventative maintenance. What You Need to Succeed: Minimum of 3-5 years of experience as an Industrial Electrician, preferably in a manufacturing environment (corrugated, paper, or heavy industry experience is a significant plus). Proven experience working with 480V three-phase systems and various control voltages. Proficiency with electrical test equipment (e.g., multimeters, ammeters, megohmmeters). Expert knowledge of electrical schematics, blueprints, and wiring diagrams. Strong aptitude for troubleshooting and programming PLCs and Variable Frequency Drives (VFDs). Massachusetts Electrical license or the equivalent certification Willingness to work on both mechanical and electrical projects. Excellent safety awareness and commitment to safe work practices. Strong mechanical aptitude and problem-solving skills. Ability to work independently, manage time effectively, and handle emergency repairs under pressure. Excellent communication skills High School Diploma or equivalent required; college degree or technical certification is a plus. Physical Requirements: Ability to stand, walk, climb, and lift up to 50 lbs. regularly. Ability to work in a loud, fast-paced industrial environment, which may include exposure to heat, dust, and chemicals. This role is primarily the first shift; however, the successful candidate must be willing to work shifts, weekends, and on-call as required to support operations. The starting rate is $34-40 per hour based on experience, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 10 days of paid vacation will be granted, and 11 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at ******************************** and the application window is expected to close by 1/19/26. #WorkWithSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is seeking an "A" Level Lead Mechanic/Technician who will perform preventive maintenance inspections on various types of vehicles. He/she will manage a fleet of 56 vehicles, assign work to other Technicians, purchase parts, and process paperwork. The position requires the Technician, must be able to teach, to diagnose, inspect, and change or repair defective coach components, sub-components, and systems on vehicles as time permits, more complex repair techniques. The A Lead Technician must possess a CDL license with airbrakes and a passenger endorsement, a 609 and 608 air conditioning certifications and at least H or T series ASE certifications. This position will report to the General Manager. Duties include, but are not limited to the following: Assign, monitor, and review daily work orders to ensure timely completion of scheduled and unscheduled repairs. Perform advanced diagnostics and repairs on engines, transmissions, electrical systems, HVAC, CNG systems, and other major vehicle components. Lead, coach, and train mechanics of all levels (A/B/C) to maintain high standards of workmanship and safety. Support the Maintenance Manager in planning preventive maintenance schedules and tracking vehicle availability. Inspect and sign off on completed repairs to ensure adherence to company, city, and CHP standards. Maintain communication between maintenance, dispatch, and operations to minimize vehicle downtime. Assist with warranty claims, vendor coordination, and parts inventory oversight. Promote safety awareness by enforcing PPE use, lockout/tagout procedures, and general shop safety compliance. Conduct or assist in root cause analysis of repeat defects, road calls, and failed inspections. Support preparation of vehicles for CHP, TRC, and City audits. Serve as acting supervisor in the absence of the Maintenance Manager. Coordinate between mechanics and utility personnel to ensure vehicle readiness and smooth daily yard operations. Qualifications: Talent Requirements: High School diploma or equivalent. Effectively use and operate the tools and equipment required for the repair and maintenance of large vehicles. Understand the theory, operation, and repair of diesel and CNG powered vehicles, including engines, transmissions, ignitions, and electrical hydraulic/pneumatic cooling, heating, and brake systems. Learn and follow industrial and shop safety rules. Read and interpret technical manuals and schematics. Learn and effectively use personal computers and the company's software programs for inventory and parts. Read maps and locate road-called vehicles. Communicate effectively both orally and in writing. Understand and follow oral and written instructions. Work independently under continual training and close supervision. Establish and maintain effective working relationships with those contacted in the course of work using principles of good customer service. Combination of at least one (1) to two (2) years of journeyman level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program. Additional Requirements: Must be able to pass a pre-employment drug screen and random drug testing. Have taken basic automotive or heavy duty repair courses or have good understanding of basic automotive/heavy duty systems. Have journeyman level tools. Must be a least 23 years of age. Must possess, or obtain and maintain a valid Class A or B Commercial Driver License with Air Brake and Passenger Endorsements, and a medical certificate by date of appointment. Work well with others. Must be able to work a varied schedule. Willing to learn. Available for training. Able to lift up to 70 lbs Starting pay range: $41 - $43/hour MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized p Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

We are seeking a Level 4 Senior Staff RF Antenna Engineer with deep expertise in antenna systems, element/mutual coupling, and free-space radiation performance-and the proven ability to rapidly evaluate, troubleshoot, and optimize existing antenna designs. This is a high-impact, fast-response role supporting programs where performance shortfalls must be diagnosed and corrected on aggressive timelines. You will bridge simulation, measurement, and practical implementation to deliver solutions that work-quickly and reliably. Key Responsibilities: Rapidly assess existing antenna and array designs for performance gaps against requirements. Diagnose and resolve issues related to mutual coupling, beam distortion, impedance mismatch, and bandwidth limitations. Recommend and implement design modifications for immediate performance improvements. Perform accelerated free-space radiation pattern measurements and compare results against simulations. Run high-fidelity EM simulations (HFSS, CST, FEKO, or similar) under compressed schedules for fast validation. Evaluate antenna integration into host platforms for mechanical, thermal, and electrical compatibility. Support urgent production and field troubleshooting, including on-site technical interventions when required. Collaborate with RF systems engineers to ensure antenna performance aligns with system-level budgets and phase stability. Produce clear, actionable evaluation reports for program stakeholders, often under short deadlines. Mentor junior engineers in rapid diagnostic and problem-solving methods. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field (Master's or PhD preferred). 10+ years of antenna design and/or evaluation experience in radar, communications, or EW systems. Expert understanding of antenna theory, EM propagation, polarization, and impedance matching. Proven ability to mitigate mutual coupling in dense or phased-array configurations. Experience delivering high-quality antenna evaluations and solutions under aggressive timelines. Proficiency with EM simulation tools such as HFSS, CST, FEKO, GRASP. Hands-on experience with antenna measurement in both anechoic chambers and open-air ranges. US Citizenship with ability to obtain and maintain a security clearance. Preferred Skills: Experience with low-observable and conformal antenna designs. Familiarity with wideband, multiband, and frequency-agile antenna systems. Exceptional problem-solving and communication skills for high-pressure, time-sensitive projects. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Rancho Cucamonga PARAMEDIC Opportunity! $27.14 - $51.08 per hour (DOE) We're hiring Paramedics that are passionate about delivering compassionate, high-quality service and basic, as well as advanced, patient care to our customers. Responsibilities: Assess each call situation to determine the best course of action while working with progressive Paramedic protocols. Utilize your Paramedic skills on medical equipment and procedures including defibrillator, EKG monitor, oxygen and suction devices, and intravenous fluids to provide advanced medical care. Communicate with patients and loved ones to provide information and assurance that care is being given. Act as Paramedic team leader and take responsibility for the scene and unit management as needed. Drive the ambulance on 911 responses. Work collaboratively and in a professional manner with all allied health and public safety personnel as well as your fellow Paramedics. Other Responsibilities: Participate in community programs to maintain AMR image and establish strong community relations. Minimum Required Qualifications: High school diploma or equivalent (GED) Ca Drivers' License Ambulance Driver's License from DMV Medical Examiner's Card from DMV State of California Paramedic License CPR Card (American Heart Association ONLY, Health Care Provider. Handwritten cards are not acceptable) ACLS Card (American Heart Association ONLY, Handwritten cards are not acceptable) Driving record in compliance with AMR Safety and Driving policy ( proof required if conditional employment is made ). ICS courses, please refer to link ************************************* IS-100B (ICS 100) IS-200B (ICS 200) IS-700A (NIMS) IS-800B (NIMS) Experience: Some past work experience, preferably in healthcare desired. Why Choose AMR? AMR is one of Global Medical Response's (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at ************************* Learn how our values are at the core of our services and vital to how we approach care and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. EEO Statement: Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. More Information about this Job: Company Benefits: Check out our careers site benefits page to learn more about our comprehensive benefit options, which include medical, vision, dental, 401k, disability, FSA, HSA, EAP, vacation and paid time off. Medic Salary range: $27.14 to $51.08 DOE this rate applies to 12-hr shift and average 20 or 49 hours per week

Imagine a career that truly takes you places, where you get to travel and meet new people every day along the journey. For 100 years, our Greyhound Drivers have been the heart and soul of our company, serving the transportation needs of communities across the nation. Do you enjoy meeting new people and have a passion for safety and the customer experience? Interested in a job that pays you to travel? Come join us in serving America's passengers as we continue our legacy of putting the wheels in motion. Responsibilities: Operate a bus in a safe and efficient manner, adhering to traffic laws and safety regulations Follow designated routes and schedules, making necessary adjustments when required Ensure the safety and comfort of passengers by providing assistance when needed and maintaining a clean bus Perform pre-trip and post-trip inspections to ensure the bus is in good working condition Maintain a clean and orderly bus, including regular cleaning of the interior and exterior Report any maintenance issues, accidents, or incidents to the appropriate authorities Assist passengers with boarding, exiting, and securing their personal belongings Follow emergency procedures and respond to incidents in accordance with company protocols Keep records of miles driven, fuel usage, and other required documentation Stay updated on company policies and safety procedures Qualifications: Fully Licensed with Class A or B Commercial Driver's License (CDL) Possesses Passenger 16+ endorsement and no air brake restriction 22 years of age or older Able to pass a DOT physical and pre-employment drug screen Full-time employment consideration only Ability to work varied schedule based on regional driver needs Benefits Medical, Dental, and Vision Plans 401K with company-matched contributions Life Insurance Paid Vacation, Holidays, and Sick Days Free Travel Passes Annual Uniform Allowance Driver Union membership & representation Career Advancement Opportunities Compensation Range: USD $29.40 - USD $31.28 /Hr.

Float Aircraft Maintenance Technician IMMEDIATELY HIRING! Aircraft Maintenance Technician FULL-TIME Opportunity in Scottsbluff, NE Starting Salary: $76,752 - $111,946 annually (including 20% geo modifier) Float Stipend 10,400 Sign On Bonus 12,500 3 weeks on/1 week off We're hiring a Float Aircraft Maintenance Technician (AMT) responsible for the overall maintenance and safety of our fleet within Guardian Flight. This technician will be qualified to support our Pilatus PC-12 airframe. This is a key role to ensure our team can safely maintain and deliver timely and high-quality transportation services, care and customer service to patients. Responsibilities Aircraft Maintenance Technician will perform maintenance services including mechanical inspections, screening, repairs and provide regular statuses to the Lead Technician. Manage inventory checks to ensure stock of supplies and equipment, regularly update the equipment tracking log, place replacement requests when necessary and document part expenditures. Clearly document service paperwork and FAA information as required and adhere to policies and procedures while complying with the company's information security standards. Take pride in sustaining a safe and clean working environment for the aircraft maintenance team and flight crew. Use appropriate communication methods to help facilitate coordination of efforts between departments, vendors and team members. Work collaboratively and in a professional manner with all allied health and public safety personnel as well as your fellow AMTs and operations team. Minimum Required Qualifications Three (3) years turboprop and/or turbine powered fixed-wing experience Valid Airframe and Powerplant (A&P) license Valid State issued Driver's license High School diploma or GED equivalent Federal Aviation Regulations knowledge EMS Systems, Aircraft maintenance systems, records and maintenance support and planning Ability to work a flexible schedule including overtime. Must be acceptable in accordance with the FAA drug and alcohol testing program. Must be able to push and/or pull 100+ lbs. Must be able to lift and/or carry up to 50 lbs. Preferred Qualifications Pilatus PC-12 maintenance experience FAA Inspection Authorization Certificate Related experience under CFR Part 14 Autopilot maintenance experience Avionics and electrical repair experience Why Choose Guardian? As a quality air medical transport service, Guardian Flight is one of Global Medical Response's (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at ************************* Learn how our values are at the core of our services and vital to how we approach care and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. EEO Statement: Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. More Information about this Job: Check out our careers site benefits page to learn more about our benefit options.

Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. MAINTENANCE MECHANIC - Seward, NE 2nd Shift: M-F; 11:30 am - 8:00 pm As a WestRock Maintenance Mechanic you will: Responsibilities: * Ensure production machinery is functioning correctly and efficiently * Perform preventative maintenance on all machinery * Troubleshoot and repair pneumatic, electrical, hydraulic, compressor, and vacuum systems * Have a working knowledge of Programmable Logic Controllers, AC/DC motors and controls * Ability to read and understand blue prints * Assemble, install and fabricate equipment as needed (welding will be required * Ability to work with steam and boiler controls and mechanical power drives * Ability to assist support staff to ensure inventory counts are accurate * Ability to submit timely and accurate paperwork * Participation in Safety Reviews, Safety Training, and Safety Audits under the direction of plant management * Willingness to participate in a maintenance training program that is provided and required * Must provide own tools (specialty tools provided by the Company) What you need to succeed: Qualifications: * Must have 2-3 years of successful electrical troubleshooting and repair experience, and be able to operate small machinery (lathe, drill press, welding equipment) * Must have at least one full year of mechanical troubleshooting and repair experience * Able to commence and continue specific courses of action with urgency * Maintain positive relationships with plant management, supervisors, office, and operational employees * Excellent communication * Interpersonal, problem solving, and troubleshooting skills * Ability to lift/push/pull 50-100 pounds multiple times throughout the day * Must be willing to work all shifts as business needs fluctuate * Willingness to fully cross-train in other technical areas of maintenance * Proven experience demonstrating dependability and timeliness with assignments, tasks, and responsibilities * History of excellent attendance is a must * Excellent Computer Skills: Microsoft Office Suite Education: * Minimum of a High School Diploma or GED is required * An Associate's degree in electrical field is preferred, but not required What we offer: * Corporate culture based on integrity, respect, accountability and excellence * Comprehensive training with numerous learning and development opportunities * An attractive salary reflecting skills, competencies and potential * A career with a global packaging company where Sustainability, Safety and Inclusion are business drivers and foundational elements of the daily work. WestRock is an Equal Opportunity Employer. We strive to create and maintain a diverse workforce where everyone feels valued, respected, and included. WestRock does not discriminate on the basis of race, color, religion, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other basis protected by federal, state or local law. #CBWRK #NE #WorkWithSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

We are seeking a Senior RF Engineer to design, develop, and test discreet transmit/receive (Tx/Rx) RF modules for advanced radar applications. The ideal candidate will have a strong background in RF circuit design, system integration, and performance optimization, with hands-on experience in taking designs from concept to production. Key Responsibilities: Design, simulate, and develop discreet RF Tx/Rx modules for radar systems. Conduct RF system-level analysis, link budget calculations, and trade-off studies. Select and integrate components such as mixers, amplifiers, oscillators, and filters. Perform schematic capture, PCB layout reviews, and work closely with layout engineers to ensure optimal high-frequency performance. Conduct laboratory testing, tuning, and validation of RF modules against specifications. Collaborate with cross-functional teams including firmware, mechanical, and systems engineering to ensure seamless product integration. Support troubleshooting and root cause analysis for performance anomalies. Maintain comprehensive documentation for design decisions, test results, and compliance requirements. Compensation Range: $99,100 - $128,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field. 5-8 years of experience in RF design, with a focus on radar or similar high-frequency applications (L,S,C, and X band). Proficiency in RF simulation tools (e.g., Keysight ADS, HFSS, CST, or similar). Proficiency in schematic capture and PCBA layout tools (e.g. Altium Designer, PADS, Allegro) Hands-on experience with RF test equipment (VNA, spectrum analyzers, signal generators, power meters). Solid understanding of RF/microwave circuit theory, impedance matching, noise figure, and gain optimization. Experience with PCB design for RF and microwave circuits. Familiarity with military or aerospace standards for RF systems is a plus. US Citizenship and ability to obtain/maintain a security clearance. Preferred Skills: Knowledge of phased-array radar architectures. Electronics packaging concepts Familiarity with thermal and mechanical considerations in high-frequency module packaging. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is seeking a Fleet Maintenance Supervisor to supervise the maintenance operation during their shift. This includes preventative maintenance and repair of a large fleet of buses and sedans, supervision of all maintenance staff during their assigned shift, assurance that all contractual requirements are achieved, supervision of the maintenance program and reports as well as tracking work orders and filling appropriately. The Fleet Maintenance Supervisor will work under the Fleet Maintenance Manager in the running of the day-to-day business. Qualified candidates must have technical competence with light/medium-duty vehicle repair and preventive maintenance. Must be available to work overnight. Job Responsibilities: Coordinate with the Maintenance Manager, other Maintenance Supervisors, and assigned Maintenance Leads to schedule and/or resume vehicle maintenance on assigned shift. Maintains close communications with Operations, to respond to road calls in a timely manner. Dispatch mechanics, and schedule repairs in an expedient manner. Reviews work orders for accuracy and ensure production schedules are met. With prioritization, safety, quality, and efficiency foremost, the MS estimates productivity times and establishes or adjusts shift employees' production schedules. Conduct pre-shift meeting with employees to communicate, prioritize, assign, adjust and interpret for vehicle inspection, servicing, repairing, and cleaning. Supervise Maintenance Department employees and productivity to ensure accurate and timely completion of job assignments and cleanup activities with follow-up inspection. Clearly communicates staff expectation in an effective and consistent manner. Responsible for the monitoring and recording of employee work time and attendance, in coordination with the Maintenance Manager, review, approve and schedule employee time off balancing the need for overtime usage. Train and direct employees on shift in all phases of service and repair of vehicles including but not limited to, basic repairs, air conditioning, electrical, major component rebuild and/or vehicle cleaning operations. Consistently and fairly, initiates where necessary, documents and recommends appropriate written and verbal disciplinary action and commendations. Analyze and assist in the resolution of work-related problems and diagnosis of malfunctions with machinery and equipment during shift. Generate, as requested, input and track work orders delegated to staff in the Fleet Focus Maintenance Management System. Updates the daily, weekly, and monthly reports. Assist in the development, monitoring, communicating, interpreting, and enforcing compliance of administrative and department policies, operating procedures, uniform, safety compliance, regulatory standards, clean-up procedures and quality control processes to ensure efficient daily operations and workflow. Responsible for retrieving, issuing, and logging parts and supplies required for use by shift employees. Qualifications: Talent Requirements: High School diploma or equivalent. Five (5) to ten (10) years of experience or training in repair and preventive maintenance of fleet equipment. At least five (5) years of supervisory experience or any combination of training and experience. ASE certified to meet job classification. If not certified, must be willing to get certified. Prior supervisory or lead experience--crews of six (6) or more. Computer skills including word processing, spreadsheets, and MS Outlook. Must possess a California Motor Vehicle Inspection License. Must have a valid California driver's license. Starting Pay Rate: $75,000 - $91,137.49 MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

911 Paramedic IMMEDIATELY HIRING! Paramedic FULL-TIME and PART-TIME Opportunity Now offering increased wages! Up to $80,000 per year salary (based on years of experience) We're hiring Paramedics that are passionate about delivering compassionate, high-quality service and advanced patient care to our customers. Responsibilities: Assess each call situation to determine the best course of action while working with progressive Paramedic protocols. Utilize your Paramedic skills on medical equipment and procedures including defibrillator, EKG monitor, oxygen and suction devices, and intravenous fluids to provide advanced medical care. Communicate with patients and loved ones to provide information and assurance that care is being given. Act as Paramedic team leader and take responsibility for the scene and unit management as needed. Drive the ambulance on 911 responses. Work collaboratively and in a professional manner with all allied health and public safety personnel as well as your fellow Paramedics. Participate in community programs to maintain AMR image and establish strong community relations. Minimum Required Qualifications: High school diploma or equivalent (GED) State Paramedic License State Driver's License BLS, ACLS, NREMT-Paramedic Driving record compliant with company policy Pass Physical Agility Test Some work experience, preferably healthcare Why Choose AMR? AMR is one of Global Medical Response's (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at ************************* Learn how our values are at the core of our services and vital to how we approach care and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. EEO Statement: Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. More Information about this Job: Compensation: Up to $80,000 per year salary (based on local schedule) depending on experience. Check out our careers site benefits page to learn more about our benefit options.