Steamfitter job description
Updated March 14, 2024
6 min read
Find better candidates in less time
Post a job on Zippia and take the best from over 7 million monthly job seekers.
Example steamfitter requirements on a job description
Steamfitter requirements can be divided into technical requirements and required soft skills. The lists below show the most common requirements included in steamfitter job postings.
Sample steamfitter requirements
- High School Diploma or equivalent.
- Relevant certifications.
- Minimum of two years of experience.
- Knowledge of applicable codes and regulations.
- Ability to read and interpret blueprints.
Sample required steamfitter soft skills
- Excellent organizational skills.
- Strong problem-solving skills.
- Ability to work both independently and as part of a team.
- High levels of initiative and attention to detail.
- Good communication skills.
Steamfitter job description example 1
Massachusetts Institute of Technology steamfitter job description
+ Department: Dof Repair & Maintenance
+ School Area: Department of Facilities
+ Employment Type: Full-Time
+ Employment Category: Non-Exempt
+ Visa Sponsorship Available: No
+ Schedule: M-F, 7:00 A.M. - 3:00 P.M.
Email a Friend Save Save Apply Now
Information on MIT's COVID-19 vaccination requirement can be found at the bottom of this posting.
STEAMFITTER, Facilities, Repair and Maintenance (R&M) (2 openings), to perform work in all areas of pressure steam systems across the Institute, including installing, repairing, maintaining, and troubleshooting a full range of steam, processed water, chilled water and compressed air systems. Will maintain high and low pressure steam systems consisting of pressure reducing valves, traps, expansion joints, heating units, steam tables and boilers; remove and reinstall pumps; install, maintain, and service new and existing commercial and industrial HVAC process systems, processed water, chilled water and compressed air systems; and respond to emergency mechanical system calls; perform all installation, maintenance, inspection and testing in accordance with applicable standards and requirements of OHSA 10 and/or established compliance requirements of the authority having jurisdiction.
Job Requirements
REQUIRED: a high school diploma or its equivalent, a five-year apprenticeship, five years' experience working with a pipefitter's license, valid driver's license, and willingness to obtain A.S.M.E. welding certification for steel pipe. Must be able work from blueprints, specifications, verbal instruction, or sketches; locate, diagnose, and correct defects and malfunctions on a variety of pipe systems; electric arc weld all piping systems; receive work order assignments, order materials, and complete tasks accurately; provide updates on the work order status and written comments provided on work orders upon completion; work with minimal supervision; lift weights of up to 50 lbs.; read and understand written directions, safety signage, and other documents; use e-mail, the IT equipment that is utilized for work order tracking software, and other types of job-specific technology once management has provided the necessary training; and work both independently and as a member of a team. Job #20734
Working conditions include ascending/descending stairs, traversing the campus, moving about the jobsite and machinery to access equipment, and/or remaining stationary for extended periods of time; working from ladders, scaffolds, and other above ground locations such as roofs; and using scissor lifts, articulating lifts, and bucket trucks. Personal protective equipment must be worn as required by the specific assignment. Environment contains dust, odors, fumes, high levels of noise, and temperature extremes; and working with and around chemicals and solvents. Work will also be performed near steam and moving machinery and in tight areas and confined spaces such as manholes and crawl spaces. Some work will be performed in research labs and animal facilities and outdoors in inclement weather. Employees who work a regular, established work scheduled are not considered essential personnel but may be required to work other shifts on an as needed basis.
MIT will conduct a background check (including checking criminal records) for finalists. For current MIT SEIU members, this background check will be done for finalists who are bidding for a promotion or for a voluntary transfer to another classification unit. 2/3/22
+ School Area: Department of Facilities
+ Employment Type: Full-Time
+ Employment Category: Non-Exempt
+ Visa Sponsorship Available: No
+ Schedule: M-F, 7:00 A.M. - 3:00 P.M.
Email a Friend Save Save Apply Now
Information on MIT's COVID-19 vaccination requirement can be found at the bottom of this posting.
STEAMFITTER, Facilities, Repair and Maintenance (R&M) (2 openings), to perform work in all areas of pressure steam systems across the Institute, including installing, repairing, maintaining, and troubleshooting a full range of steam, processed water, chilled water and compressed air systems. Will maintain high and low pressure steam systems consisting of pressure reducing valves, traps, expansion joints, heating units, steam tables and boilers; remove and reinstall pumps; install, maintain, and service new and existing commercial and industrial HVAC process systems, processed water, chilled water and compressed air systems; and respond to emergency mechanical system calls; perform all installation, maintenance, inspection and testing in accordance with applicable standards and requirements of OHSA 10 and/or established compliance requirements of the authority having jurisdiction.
Job Requirements
REQUIRED: a high school diploma or its equivalent, a five-year apprenticeship, five years' experience working with a pipefitter's license, valid driver's license, and willingness to obtain A.S.M.E. welding certification for steel pipe. Must be able work from blueprints, specifications, verbal instruction, or sketches; locate, diagnose, and correct defects and malfunctions on a variety of pipe systems; electric arc weld all piping systems; receive work order assignments, order materials, and complete tasks accurately; provide updates on the work order status and written comments provided on work orders upon completion; work with minimal supervision; lift weights of up to 50 lbs.; read and understand written directions, safety signage, and other documents; use e-mail, the IT equipment that is utilized for work order tracking software, and other types of job-specific technology once management has provided the necessary training; and work both independently and as a member of a team. Job #20734
Working conditions include ascending/descending stairs, traversing the campus, moving about the jobsite and machinery to access equipment, and/or remaining stationary for extended periods of time; working from ladders, scaffolds, and other above ground locations such as roofs; and using scissor lifts, articulating lifts, and bucket trucks. Personal protective equipment must be worn as required by the specific assignment. Environment contains dust, odors, fumes, high levels of noise, and temperature extremes; and working with and around chemicals and solvents. Work will also be performed near steam and moving machinery and in tight areas and confined spaces such as manholes and crawl spaces. Some work will be performed in research labs and animal facilities and outdoors in inclement weather. Employees who work a regular, established work scheduled are not considered essential personnel but may be required to work other shifts on an as needed basis.
MIT will conduct a background check (including checking criminal records) for finalists. For current MIT SEIU members, this background check will be done for finalists who are bidding for a promotion or for a voluntary transfer to another classification unit. 2/3/22
Post a job for free, promote it for a fee
Steamfitter job description example 2
Ohio University steamfitter job description
Under general direction of a lead worker or supervision by departmental administrator performs highly skilled work in installation, maintenance & repair of steam distribution systems &/or equipment. Provides work direction, training and mentoring* of lower-level steamfitters and/or other trade workers performing craft duties.
• Adheres to all OSHA and/or Ohio University required safety guidelines.
• Installs, replaces and/or repairs steam lines, expansion joints, pumps, traps, regulators, bearings, valves (e.g., feed, sump, vacuum); welds, brazes, cuts and heats metals using acetylene and electric arc welding equipment; repairs kitchen and laundry equipment; insulates steam pipes and heaters, repairs controls in boiler room and performs preventive maintenance on equipment, in tunnels and in boiler rooms. Provides work direction, training and mentoring* of lower-level steamfitters and/or other trade workers performing craft duties.
• Performs routine inspections of tunnels and mechanical rooms.
• Completes necessary documentation. Uses Computerized Maintenance Management System (CMMS).
• Performs other related duties as required. Operate forklift equipment at Heating Plant as assigned, if specifically qualified to do so***.
(***Official training required to operate forklift equipment)
MINIMUM QUALIFICATIONS
• Journey-level working knowledge of steam/pipe fitting & related safety practices.
• Read & write common vocabulary in sentence structure.
• Add, subtract, multiply & divide whole numbers, calculate fractions, decimals & percentages
• Ability to apply principles to solve practical problems.
• Ability to carry out instructions in written, oral, and pictorial form.
• Ability to work independently or with others.
• Demonstrated willingness to work with diverse populations.
• Demonstrate dexterity and skill in use of craft-associated hand &/or power tools & equipment.
• Knowledge of all applicable OSHA and/or Ohio University safety guidelines and procedures.
• Work at heights.
• Lift up to 50 lbs.
• Ohio pressure piping welding certification for 2" 6G-fixed position-open butt weld*
• 48 months skilled experience in steamfitter work, or equivalent
• Valid driver’s license
• Successful completion of a written and/or practical exam may be required.
• May be exposed to dirt, grease, odors, cramped conditions, extreme hot or cold temperatures, heights, and electrical hazards; may be exposed to dangerous machinery; confined spaces.
• An established pattern of good work habits and performance with good interpersonal skills.
(*must be obtained prior to completion of probationary period.)
PREFERRED QUALIFICATIONS
Knowledge of employee mentoring*, training* and development* and inventory control* (*developed after employment)
PAY RATE - AFSCME |08| Minimum $23.20 hourly
WORK SCHEDULE -
Days: Monday – Friday
Hours: 7:00 am – 3:30 pm
Ohio University is committed to creating a respectful and inclusive educational and workplace environment. Ohio University is an equal access/equal opportunity and affirmative action employer with a strong commitment to building and maintaining a diverse workforce. Women, persons of color, persons with disabilities, and veterans are encouraged to apply.
Days off: Saturday & Sunday
recblid ejo27uypzvc2fly2l9yjplu90pvi2u
• Adheres to all OSHA and/or Ohio University required safety guidelines.
• Installs, replaces and/or repairs steam lines, expansion joints, pumps, traps, regulators, bearings, valves (e.g., feed, sump, vacuum); welds, brazes, cuts and heats metals using acetylene and electric arc welding equipment; repairs kitchen and laundry equipment; insulates steam pipes and heaters, repairs controls in boiler room and performs preventive maintenance on equipment, in tunnels and in boiler rooms. Provides work direction, training and mentoring* of lower-level steamfitters and/or other trade workers performing craft duties.
• Performs routine inspections of tunnels and mechanical rooms.
• Completes necessary documentation. Uses Computerized Maintenance Management System (CMMS).
• Performs other related duties as required. Operate forklift equipment at Heating Plant as assigned, if specifically qualified to do so***.
(***Official training required to operate forklift equipment)
MINIMUM QUALIFICATIONS
• Journey-level working knowledge of steam/pipe fitting & related safety practices.
• Read & write common vocabulary in sentence structure.
• Add, subtract, multiply & divide whole numbers, calculate fractions, decimals & percentages
• Ability to apply principles to solve practical problems.
• Ability to carry out instructions in written, oral, and pictorial form.
• Ability to work independently or with others.
• Demonstrated willingness to work with diverse populations.
• Demonstrate dexterity and skill in use of craft-associated hand &/or power tools & equipment.
• Knowledge of all applicable OSHA and/or Ohio University safety guidelines and procedures.
• Work at heights.
• Lift up to 50 lbs.
• Ohio pressure piping welding certification for 2" 6G-fixed position-open butt weld*
• 48 months skilled experience in steamfitter work, or equivalent
• Valid driver’s license
• Successful completion of a written and/or practical exam may be required.
• May be exposed to dirt, grease, odors, cramped conditions, extreme hot or cold temperatures, heights, and electrical hazards; may be exposed to dangerous machinery; confined spaces.
• An established pattern of good work habits and performance with good interpersonal skills.
(*must be obtained prior to completion of probationary period.)
PREFERRED QUALIFICATIONS
Knowledge of employee mentoring*, training* and development* and inventory control* (*developed after employment)
PAY RATE - AFSCME |08| Minimum $23.20 hourly
WORK SCHEDULE -
Days: Monday – Friday
Hours: 7:00 am – 3:30 pm
Ohio University is committed to creating a respectful and inclusive educational and workplace environment. Ohio University is an equal access/equal opportunity and affirmative action employer with a strong commitment to building and maintaining a diverse workforce. Women, persons of color, persons with disabilities, and veterans are encouraged to apply.
Days off: Saturday & Sunday
recblid ejo27uypzvc2fly2l9yjplu90pvi2u
Dealing with hard-to-fill positions? Let us help.
Resources for employers posting steamfitter jobs
Average cost of hiring
Recruitment statistics
How to write a job description
Examples of work conditions
Steamfitter job description FAQs
Ready to start hiring?
Updated March 14, 2024
Updated March 14, 2024